High temperature in-situ heat treatment of a refractory material by means of synchrotron refraction radiography
- The stress–strain behavior of certain ceramics, such as aluminum titanate (AT, Al2TiO5), has features that are unusual for brittle material. In particular, a substantial nonlinearity under uniaxial tension, and load–unload hysteresis caused by the increase of the incremental stiffness at the beginning of unloading. These features are observed experimentally and attributed to microcracking. In this study, we investigate the mechanical response of an AT material at room and high temperature. Microstructure and microcracking are analyzed by means of electron microscopy, and both synchrotron micro computed tomography (µCT) and refraction radiography (SXRR). Synchrotron refraction radiography is combined with in-situ heating at high-temperatures (up to 1400°C) to be able to monitor the relative closure of microcracks as a function of increasing/decreasing temperatures.
Autor*innen: | Itziar Serrano Munoz, Mossaab Mouiya, Marco Prasek, Andreas Kupsch, Giovanni Bruno |
---|---|
Dokumenttyp: | Tagungsband (Herausgeberschaft für den kompletten Band) |
Veröffentlichungsform: | Graue Literatur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Proceedings of the 21st European Conference on Composite Materials |
Jahr der Erstveröffentlichung: | 2024 |
Organisationseinheit der BAM: | 8 Zerstörungsfreie Prüfung |
8 Zerstörungsfreie Prüfung / 8.5 Röntgenbildgebung | |
Herausgeber (Institution): | ECCM21 |
Verlag: | The European Society for Composite Materials (ESCM) and the Ecole Centrale de Nantes. |
Verlagsort: | Nantes |
Erste Seite: | 47 |
Letzte Seite: | 53 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | In-situ heating up to 1400°C; Microcracking; Refractory materials; Synchrotron µCT and refraction radiography |
Themenfelder/Aktivitätsfelder der BAM: | Material |
Material / Degradation von Werkstoffen | |
Veranstaltung: | ECCM21 |
Veranstaltungsort: | Nantes, France |
Beginndatum der Veranstaltung: | 02.07.2024 |
Enddatum der Veranstaltung: | 05.07.2024 |
DOI: | 10.60691/yj56-np80 |
URL: | https://gem.ec-nantes.fr/en/eccm21-proceedings/ |
ISBN: | 978-2-912985-01-9 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 10.07.2024 |
Referierte Publikation: | Nein |