Investigation of the thermal history of L-PBF metal parts by feature extraction from in-situ SWIR thermography
- Laser powder bed fusion is used to create near net shape metal parts with a high degree of freedom in geometry design. When it comes to the production of safety critical components, a strict quality assurance is mandatory. An alternative to cost-intensive non-destructive testing of the produced parts is the utilization of in-situ process monitoring techniques. The formation of defects is linked to deviations of the local thermal history of the part from standard conditions. Therefore, one of the most promising monitoring techniques in additive manufacturing is thermography. In this study, features extracted from thermographic data are utilized to investigate the thermal history of cylindrical metal parts. The influence of process parameters, part geometry and scan strategy on the local heat distribution and on the resulting part porosity are presented. The suitability of the extracted features for in-situ process monitoring is discussed.
Autor*innen: | Simon OsterORCiD, Christiane MaierhoferORCiD, Gunther MohrORCiD, Kai HilgenbergORCiD, Alexander Ulbricht, Simon AltenburgORCiD |
---|---|
Dokumenttyp: | Beitrag zu einem Tagungsband |
Veröffentlichungsform: | Graue Literatur |
Sprache: | Englisch |
Jahr der Erstveröffentlichung: | 2021 |
Organisationseinheit der BAM: | 8 Zerstörungsfreie Prüfung |
8 Zerstörungsfreie Prüfung / 8.3 Thermografische Verfahren | |
8 Zerstörungsfreie Prüfung / 8.5 Röntgenbildgebung | |
9 Komponentensicherheit | |
9 Komponentensicherheit / 9.6 Additive Fertigung metallischer Komponenten | |
Verlag: | SPIE - The international society for optics and photonics |
Jahrgang/Band: | 11743 |
Erste Seite: | 1 |
Letzte Seite: | 11 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | Additive manufacturing (AM); In-situ monitoring; Infrared thermography; Laser beam melting (LBM); SWIR camera; Selective laser melting (SLM) |
Themenfelder/Aktivitätsfelder der BAM: | Material |
Material / Additive Fertigung | |
Veranstaltung: | Thermosense: Thermal Infrared Applications XLIII |
Veranstaltungsort: | Online meeting |
Beginndatum der Veranstaltung: | 12.04.2021 |
Enddatum der Veranstaltung: | 16.04.2021 |
DOI: | 10.1117/12.2587913 |
ISBN: | 978-1-5106-4324-6 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 29.04.2021 |
Referierte Publikation: | Ja |
Datum der Eintragung als referierte Publikation: | 23.09.2021 |