Failure of epoxy resins and composites under multiaxial loads
- The failure of laminates is originated in plies loaded transverse to the fiber direction, e.g. in the 90° ply of a cross ply laminate. The initiation of failure is due to the debonding of individual fibers At some point the interface crack kinks into the matrix and propagates towards the inter-face of the neighbouring fiber. The cracks then continue propagating through the full ply. The interface failure obviously is the dominating process of the failure of plies in high fiber volume fraction composites. Several authors investigated the interfacial crack propagation on model systems. First, Varna and Paris studied the debonding process on a single fiber embedded in pure matrix under transverse ten-sion by fracture mechanical analyses. Correa and Paris performed experimental as well as numerical studies by calculating the mixed mode energy release rate under different loading conditions. These analyses were extended to fibers surrounded by a composite material by the present authors.The failure of laminates is originated in plies loaded transverse to the fiber direction, e.g. in the 90° ply of a cross ply laminate. The initiation of failure is due to the debonding of individual fibers At some point the interface crack kinks into the matrix and propagates towards the inter-face of the neighbouring fiber. The cracks then continue propagating through the full ply. The interface failure obviously is the dominating process of the failure of plies in high fiber volume fraction composites. Several authors investigated the interfacial crack propagation on model systems. First, Varna and Paris studied the debonding process on a single fiber embedded in pure matrix under transverse ten-sion by fracture mechanical analyses. Correa and Paris performed experimental as well as numerical studies by calculating the mixed mode energy release rate under different loading conditions. These analyses were extended to fibers surrounded by a composite material by the present authors. Among others, Comninou as well as Sun and Jih have shown that the separation into a mode I and mode II energy release rate is not universal but the mixed mode ratio depends on the length of the crack increment. Comninou developed a solution of an interface crack between dissimilar media which reveals the even a small contact zone is found near the crack tip. As a result, the mode I part of the energy release rate vanishes because no opening of the crack takes place. The contact zone, however, is extremely small. If these mathematical phenomena, however, are relevant for physical problems is not verified.…
MetadatenAutor*innen: | Christian Marotzke, Titus Feldmann |
---|
Dokumenttyp: | Beitrag zu einem Tagungsband |
---|
Veröffentlichungsform: | Verlagsliteratur |
---|
Sprache: | Englisch |
---|
Titel des übergeordneten Werkes (Englisch): | Thermosets 2013 - 3rd International conference on thermosets (Proceedings) |
---|
Jahr der Erstveröffentlichung: | 2013 |
---|
Herausgeber (Institution): | Fraunhofer PYCO |
---|
Erste Seite: | 83 |
---|
Letzte Seite: | 86 |
---|
Freie Schlagwörter: | Debonding; Energy release rate; Fracture mechanics; Interface; Laminate |
---|
Veranstaltung: | Thermosets 2013 - 3rd International conference on thermosets |
---|
Veranstaltungsort: | Berlin, Germany |
---|
Beginndatum der Veranstaltung: | 18.09.2013 |
---|
Enddatum der Veranstaltung: | 20.09.2013 |
---|
ISBN: | 978-3-00-043394-8 |
---|
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
---|
Datum der Freischaltung: | 20.02.2016 |
---|
Referierte Publikation: | Nein |
---|