• Treffer 55 von 58
Zurück zur Trefferliste

Determination of ignition temperature in micro reactors

  • Explosion protection of oxidation reactions in micro reactors was investigated. Lange et al. (2014) reported on the possibilities of operating oxidation reactions in catalyst coated micro reactors within the explosion regime, but also warned about hotspot induced thermal runaway and detonation ignition at certain conditions. Methane and ethene, representing the explosion groups IIA1 and IIB (DIN EN ISO 16852), were used in stoichiometric oxygen mixtures with respect to total oxidation, which represents the worst case scenario in terms of safety assessment. Using laser radiation on a ceramic target inside of the micro channel, an artificial, controllable hotspot was generated. The ignition temperatures of fuel gas/oxygen mixtures inside a micro reactor were measured and their dependencies on initial pressure, initial temperature, volumetric flow rate, and micro channel height were examined. Deflagration reactions prior to the detonation were observed for the first time inside a microExplosion protection of oxidation reactions in micro reactors was investigated. Lange et al. (2014) reported on the possibilities of operating oxidation reactions in catalyst coated micro reactors within the explosion regime, but also warned about hotspot induced thermal runaway and detonation ignition at certain conditions. Methane and ethene, representing the explosion groups IIA1 and IIB (DIN EN ISO 16852), were used in stoichiometric oxygen mixtures with respect to total oxidation, which represents the worst case scenario in terms of safety assessment. Using laser radiation on a ceramic target inside of the micro channel, an artificial, controllable hotspot was generated. The ignition temperatures of fuel gas/oxygen mixtures inside a micro reactor were measured and their dependencies on initial pressure, initial temperature, volumetric flow rate, and micro channel height were examined. Deflagration reactions prior to the detonation were observed for the first time inside a micro reactor.zeige mehrzeige weniger

Volltext Dateien herunterladen

  • Determination of ignition temperature in micro reactors.pdf
    eng

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Emilio Balcazar Pust, F. Neher, Christian Liebner, Hartmut Hieronymus, E. Klemm
Dokumenttyp:Zeitschriftenartikel
Veröffentlichungsform:Verlagsliteratur
Sprache:Englisch
Titel des übergeordneten Werkes (Englisch):Chemical engineering transactions
Jahr der Erstveröffentlichung:2016
Verlag:AIDIC
Verlagsort:Milano
Jahrgang/Band:48
Erste Seite:547
Letzte Seite:552
DDC-Klassifikation:Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurbau
Freie Schlagwörter:Explosionsschutz; Mikroverfahrenstechnik; Thermisches Durchgehen; Zündtemperatur
Autoignition temperature; Explosion safety; Hotspot; Micro process engineering; Thermal Runaway
DOI:10.3303/CET1648092
ISSN:2283-9216
ISSN:1974-9791
Verfügbarkeit des Dokuments:Datei im Netzwerk der BAM verfügbar ("Closed Access")
Datum der Freischaltung:20.02.2016
Referierte Publikation:Ja
Datum der Eintragung als referierte Publikation:17.09.2015
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.