Laser beam welding of aluminium alloys under the influence of an electromagnetic field
- During laser beam welding of aluminum alloys an electromagnetic field may favour pore outgassing through the top oxide layer. High frequencies cause a small penetration depth and thus exert a stabilizing effect on the weld surface. The point at which the laser beam between the two magnetic poles hits the workpiece surface is crucial to the influence of the magnetic field on the weld surface roughness. Using analyzed parameters for different laser points of application cause a change in weld surface roughness could be observed. The weld surface roughness could be reduced by 50%. The outgassing effect in terms of a reduction of pores could be observed for all parameter sets investigated.
Autor*innen: | André Schneider, Vjaceslav Avilov, Andrey GumenyukORCiD, Michael RethmeierORCiD |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Physics Procedia |
Jahr der Erstveröffentlichung: | 2013 |
Verlag: | Elsevier B.V. |
Verlagsort: | Amsterdam [u.a.] |
Jahrgang/Band: | 41 |
Erste Seite: | 4 |
Letzte Seite: | 11 |
Freie Schlagwörter: | Aluminium alloys; Electromagnetically controlled laser beam welding; Porosity prevention; Surface roughness |
Veranstaltung: | Lasers in manufacturing conference 2013 |
Veranstaltungsort: | Munich, Germany |
Beginndatum der Veranstaltung: | 13.05.2013 |
Enddatum der Veranstaltung: | 16.05.2013 |
DOI: | 10.1016/j.phpro.2013.03.045 |
ISSN: | 1875-3892 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 20.02.2016 |
Referierte Publikation: | Ja |
Datum der Eintragung als referierte Publikation: | 25.04.2013 |