Stefan Spitzer, Enis Askar, Alexander Benke, C. Cloney, S. D’Hyon, O. Dufaud, Z. Dyduch, D. Gabel, P. Geoerg, V. Heilmann, V. Jankuj, W. Jian, U. Krause, Arne Krietsch, M. Mynarz, F. Norman, J. Skrinsky, J. Taveau, A. Vignes, S. Zakel, S. Zhong
- There is no applicable existing standard for the determination of safety characteristics for hybrid mixtures. While developing a new standard in a joint research project in Germany first results from parameter studies led to a standard procedure that can be adopted by laboratories that are already testing dusts in the so called 20L-sphere with as little additional effort as necessary. In fact, one of the main objectives of this research project was to keep modifications and adjustments from the generally accepted dust testing procedures as easy and minimal as possible so as to limit potential deviations from one laboratory to another.
In this first round robin test on hybrid mixtures ever, with methane as gas component and a specific corn starch as dust sample, the practicality of the whole procedure, the scattering of the results and the deviation between the testing apparatuses is investigated. This paper summarizes the experimental procedure adopted and objectives of the firstThere is no applicable existing standard for the determination of safety characteristics for hybrid mixtures. While developing a new standard in a joint research project in Germany first results from parameter studies led to a standard procedure that can be adopted by laboratories that are already testing dusts in the so called 20L-sphere with as little additional effort as necessary. In fact, one of the main objectives of this research project was to keep modifications and adjustments from the generally accepted dust testing procedures as easy and minimal as possible so as to limit potential deviations from one laboratory to another.
In this first round robin test on hybrid mixtures ever, with methane as gas component and a specific corn starch as dust sample, the practicality of the whole procedure, the scattering of the results and the deviation between the testing apparatuses is investigated. This paper summarizes the experimental procedure adopted and objectives of the first round-robin phase involving three of the four original German companies, plus volunteering laboratories from Australia, Belgium, Czech Republic, France, Poland and P.R. China. The results will have an impact on the new standard and may lead to robust data for later simulation purposes.…
MetadatenAutor*innen: | Stefan SpitzerORCiD, Enis AskarORCiD, Alexander Benke, C. Cloney, S. D’Hyon, O. Dufaud, Z. Dyduch, D. Gabel, P. Geoerg, V. Heilmann, V. Jankuj, W. Jian, U. Krause, Arne Krietsch, M. Mynarz, F. Norman, J. Skrinsky, J. Taveau, A. Vignes, S. Zakel, S. Zhong |
---|
Dokumenttyp: | Zeitschriftenartikel |
---|
Veröffentlichungsform: | Verlagsliteratur |
---|
Sprache: | Englisch |
---|
Titel des übergeordneten Werkes (Englisch): | Journal of loss prevention in the process industries |
---|
Jahr der Erstveröffentlichung: | 2022 |
---|
Organisationseinheit der BAM: | 2 Prozess- und Anlagensicherheit |
---|
| 2 Prozess- und Anlagensicherheit / 2.1 Sicherheit von Energieträgern |
---|
Verlag: | Elsevier |
---|
Verlagsort: | Amsterdam |
---|
Jahrgang/Band: | 81 |
---|
Aufsatznummer: | 104947 |
---|
Erste Seite: | 1 |
---|
Letzte Seite: | 8 |
---|
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurbau |
---|
Freie Schlagwörter: | 20L-sphere; Hybrid mixtures; Round robin test; Turbulent combustion |
---|
Themenfelder/Aktivitätsfelder der BAM: | Infrastruktur |
---|
DOI: | 10.1016/j.jlp.2022.104947 |
---|
ISSN: | 0950-4230 |
---|
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
---|
Datum der Freischaltung: | 12.12.2022 |
---|
Referierte Publikation: | Ja |
---|
Datum der Eintragung als referierte Publikation: | 18.01.2023 |
---|
Paper des Monats: | Ja |
---|