BLEVE performance of fire protection coating systems on dangerous goods tanks in a test fire
- How can the risk of a BLEVE be reduced? That is the main question based on different research projects. In various large scale fire tests fire protection coating systems were used of different manufacturers. The degree of the coating as well as the layer thickness and the processing were varied. These experimental configurations were partly tested with and without pressure relief valve. The pressure relief valves were not protected again the thermal Load from the test fire. The ambition is to find a minimum of the thickness from the fire protection coating witch delay a BLEVE up to 90 minutes. Here are given the most interested configurations of tanks in fire and a description of the test-rigs.
Autor*innen: | Christian Sklorz, Frank Otremba, Christian Balke |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | International journal of materials science and engineering |
Jahr der Erstveröffentlichung: | 2013 |
Verlag: | Engineering and technology publishing |
Jahrgang/Band: | 1 |
Ausgabe/Heft: | 2 |
Erste Seite: | 90 |
Letzte Seite: | 93 |
Freie Schlagwörter: | BLEVE; Fire protection coating; Isolation; Large scale fire test; Test rigs |
DOI: | 10.12720/ijmse.1.2.90-93 |
ISSN: | 2315-4527 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 20.02.2016 |
Referierte Publikation: | Nein |