• Treffer 3 von 0
Zurück zur Trefferliste

Fluorescence polarization immunoassays - Comparison of platforms

  • Immunoassays are in the majority of formats heterogeneous assays with one of the commodities – antibody or antigen – immobilized on a solid substrate or sometimes to nanoparticles or beads. All these formats require a washing step in order to separate bound from non-bound species before generating the measurement signal. Measuring fluorescence polarization is a method to distinguish between a fluorescent macromolecule and a low-molecular weight fluorophore. After irradiation of the sample with polarized light, a macromolecule like e.g. an antibody, will emit still highly polarized light (high polarization, resp. small difference in degree of polarization to the background). In a fluorescence polarization immunoassay, the fluorescence of an analyte surrogate (a fluorescence “tracer”) is followed. Depolarization is high and so the measured polarization is low. When antibody is added, the tracer is bound, depolarization decreases and the in polarization is high. Increasing amounts ofImmunoassays are in the majority of formats heterogeneous assays with one of the commodities – antibody or antigen – immobilized on a solid substrate or sometimes to nanoparticles or beads. All these formats require a washing step in order to separate bound from non-bound species before generating the measurement signal. Measuring fluorescence polarization is a method to distinguish between a fluorescent macromolecule and a low-molecular weight fluorophore. After irradiation of the sample with polarized light, a macromolecule like e.g. an antibody, will emit still highly polarized light (high polarization, resp. small difference in degree of polarization to the background). In a fluorescence polarization immunoassay, the fluorescence of an analyte surrogate (a fluorescence “tracer”) is followed. Depolarization is high and so the measured polarization is low. When antibody is added, the tracer is bound, depolarization decreases and the in polarization is high. Increasing amounts of analyte more and more impede the tracer being bound by the tracer and thus the decreases, the typical sigmoidal relationship is obtained (Fig. 1). We dispose of 5 polarization platforms reading in plate mode, strip mode and cuvette mode. One is able to register polarization changes with time and so allows for kinetic measurements another one is hand-held. We have been comparing FPIA formats before [1-4] and now a comprehensive view on sensitivities, the importance of fast vs. slow binding kinetics as well as the choice of format can be presented.zeige mehrzeige weniger

Volltext Dateien herunterladen

  • DBS BioSensor 2017_Potsdam_KN7_Schneider_2017-03-21.pdf
    eng

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Rudolf SchneiderORCiD
Dokumenttyp:Vortrag
Veröffentlichungsform:Präsentation
Sprache:Englisch
Jahr der Erstveröffentlichung:2017
DDC-Klassifikation:Naturwissenschaften und Mathematik / Chemie / Analytische Chemie
Freie Schlagwörter:FPIA; Fluoreszenz; Immunoassay
Veranstaltung:BioSensor 2017 - 1st European and 10th German BioSensor Symposium
Veranstaltungsort:Potsdam, Germany
Beginndatum der Veranstaltung:20.03.2017
Enddatum der Veranstaltung:23.03.2017
Verfügbarkeit des Dokuments:Datei im Netzwerk der BAM verfügbar ("Closed Access")
Datum der Freischaltung:21.12.2017
Referierte Publikation:Nein
Eingeladener Vortrag:Nein
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.