• Treffer 3 von 32
Zurück zur Trefferliste

Simulation of shock absorbing materials loaded by drop weights

  • The numerical Simulation of transport and storage casks for radioactive waste in accidental scenarios requires adequate material models and input parameters for all relevant structural cask elements, the Impact foundation as well as possibly further components involved in the incident. They form the basis for reliable analysis of different loading situations allowing substituting, at least in parts, experimental investigations that are needed in safety Reports submitted for nuclear licensing procedures. Hereby, the efficiency of the energy absorbing components, such as cask Impact limiters or equivalent structures placed onto or into the foundation of storage buildings, determine to a large extend the performance and thus the design of the casks. The limiters, which are usually made of wood, polyurethane foam (PUF) or damping concrete, are subjected to Major plastic deformations, whose Distribution and magnitude strongly depend on loading speed, course and temperature.The numerical Simulation of transport and storage casks for radioactive waste in accidental scenarios requires adequate material models and input parameters for all relevant structural cask elements, the Impact foundation as well as possibly further components involved in the incident. They form the basis for reliable analysis of different loading situations allowing substituting, at least in parts, experimental investigations that are needed in safety Reports submitted for nuclear licensing procedures. Hereby, the efficiency of the energy absorbing components, such as cask Impact limiters or equivalent structures placed onto or into the foundation of storage buildings, determine to a large extend the performance and thus the design of the casks. The limiters, which are usually made of wood, polyurethane foam (PUF) or damping concrete, are subjected to Major plastic deformations, whose Distribution and magnitude strongly depend on loading speed, course and temperature. Consequently, it is necessary to establish a systematic data basis and implement this information in advanced numerical material formulations in Order to enable finite element simulations to account for all relevant factors.zeige mehrzeige weniger

Volltext Dateien herunterladen

  • Simulation of shock absorbing materials.pdf
    eng

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar
Metadaten
Autoren/innen:Eva Maria Kasparek, Holger Völzke, Robert Scheidemann
Dokumenttyp:Zeitschriftenartikel
Veröffentlichungsform:Verlagsliteratur
Sprache:Englisch
Titel des übergeordneten Werkes (Englisch):Atw
Jahr der Erstveröffentlichung:2013
Organisationseinheit der BAM:3 Gefahrgutumschließungen
3 Gefahrgutumschließungen / 3.4 Sicherheit von Lagerbehältern
3 Gefahrgutumschließungen / 3.3 Sicherheit von Transportbehältern
Herausgeber (Institution):Kerntechnische Gesellschaft
Verlag:Inforum
Verlagsort:Berlin
Jahrgang/Band:58
Ausgabe/Heft:8/9
Erste Seite:501
Letzte Seite:506
Freie Schlagwörter:Fem; Guided drop tests; Material models; Polyurethane foam; Spruce; Strain rate sensitivity; Temperature sensitivity
ISSN:1431-5254
Verfügbarkeit des Dokuments:Datei im Netzwerk der BAM verfügbar ("Closed Access")
Datum der Freischaltung:20.02.2016
Referierte Publikation:Ja
Datum der Eintragung als referierte Publikation:26.09.2013