Advanced evaluation of structural sealant glazing systems by a new system test approach
- More information about the capability and especially about the durability of structural sealant glazing (SSG) systems are needed. To make a contribution to unanswered questions, a suitable system evaluation test is necessary. The basis for such a test is a load function, which accounts for the decisive loads SSG systems are exposed to during their working life. This paper proposes a general load function for standard SSG systems at central German locations for accelerated durability tests. Decisive loads are determined and different SSG construction types defined. The performance of these SSG systems under exposure to external loads and to a dynamic pendulum impact is investigated via finite element analyses using a hyperelastic material model. The external loads are applied separately and superimposed. Compression, tensile, and shear deformations of the sealant are determined. It is found that the sealant is subjected to normal and shear stresses simultaneously. The requirements for aMore information about the capability and especially about the durability of structural sealant glazing (SSG) systems are needed. To make a contribution to unanswered questions, a suitable system evaluation test is necessary. The basis for such a test is a load function, which accounts for the decisive loads SSG systems are exposed to during their working life. This paper proposes a general load function for standard SSG systems at central German locations for accelerated durability tests. Decisive loads are determined and different SSG construction types defined. The performance of these SSG systems under exposure to external loads and to a dynamic pendulum impact is investigated via finite element analyses using a hyperelastic material model. The external loads are applied separately and superimposed. Compression, tensile, and shear deformations of the sealant are determined. It is found that the sealant is subjected to normal and shear stresses simultaneously. The requirements for a representative specimen are derived. The results will be taken as basics for the development and the construction of a test facility to evaluate the durability of structural sealant glazing systems.…
Autor*innen: | Rico Kaatz, Christoph Recknagel |
---|---|
Persönliche Herausgeber*innen: | L.D. Carbary, A. T. Wolf |
Dokumenttyp: | Beitrag zu einem Sammelband |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Durability of building and construction sealants and adhesives: 5th volume |
Jahr der Erstveröffentlichung: | 2015 |
Herausgeber (Institution): | ASTM International (American Society for Testing and Materials) |
Verlag: | ASTM |
Verlagsort: | West Conshohocken, PA, USA |
Jahrgang/Band: | 5 |
Ausgabe/Heft: | STP 1583 |
Erste Seite: | 376 |
Letzte Seite: | 402 |
Freie Schlagwörter: | ANSYS; Decisive loads; Durability; Finite element analysis; Grid study; Hyperelastic; Load function; Non-linear material; Performance testing; Sealant deformation; Sealants; Structural glazing; Structural sealants; System evaluation |
DOI: | 10.1520/STP158320140074 |
ISSN: | 2154-6673 |
ISBN: | 978-0-8031-7611-9 |
Bemerkung: | Serientitel: ASTM Selected Technical Papers – Series title: ASTM Selected Technical Papers |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 20.02.2016 |
Referierte Publikation: | Nein |