• Treffer 1 von 67
Zurück zur Trefferliste

Effect of cooling rate on microstructure and properties of microalloyed HSLA steel weld metals

  • Two high strength Nb/Ti microalloyed S690QL steels were welded with identical filler material, varying welding parameters to obtain three cooling rates: slow, medium and fast cooling. As cooling rate increased, the predominantly acicular ferrite in Nb weld metal (WM) is substituted by bainite, with a consequence of obvious hardness increase, but in Ti WM, no great variation of acicular ferrite at all cooling rates contributed to little increment of hardness. The transition between bainite and acicular ferrite has been analysed from the point view of inclusions characteristics, chemical composition and cooling rate. Excellent Charpy toughness at 233 K was obtained with acicular ferrite as predominantly microstructure. Even with bainite weld of high hardness, the toughness was nearly enough to fulfill the minimal requirements. WM for Ti steel showed to be markedly less sensitive to the variations of cooling rate than that for Nb steel.

Volltext Dateien herunterladen

  • Effect of cooling rate on microstructure and properties of microalloyed HSLA steel weld metals.pdf
    eng

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Lei Zhang, Andreas PittnerORCiD, Thomas Michael, Michael RhodeORCiD, Thomas KannengießerORCiD
Dokumenttyp:Zeitschriftenartikel
Veröffentlichungsform:Verlagsliteratur
Sprache:Englisch
Titel des übergeordneten Werkes (Englisch):Science and Technology of Welding and Joining
Jahr der Erstveröffentlichung:2015
Herausgeber (Institution):Institute of Materials, Minerals and Mining
Verlag:Taylor and Francis
Verlagsort:London, UK
Jahrgang/Band:20
Ausgabe/Heft:5
Erste Seite:371
Letzte Seite:377
DDC-Klassifikation:Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten
Freie Schlagwörter:Acicular ferrite; Charpy toughness; Cooling rate; High strength steel; Weld metal
DOI:10.1179/1362171815Y.0000000026
ISSN:1362-1718
Verfügbarkeit des Dokuments:Datei im Netzwerk der BAM verfügbar ("Closed Access")
Datum der Freischaltung:16.06.2016
Referierte Publikation:Nein
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.