Long-term corrosion behaviour of stainless steels in marine atmosphere
- Nine different stainless steel alloys were exposed for 5 years under marine environment and their corrosion behaviour was compared and assessed. The investigation of four different surface finishes for all alloys tested further enabled to consider industry-specific features of the surface finish for the material comparison. The results of the exposure tests yield conclusions regarding the influence of alloy composition, surface finish and exposure duration under marine environment. The three duplex stainless steels revealed excellent corrosion resistance even in case of crevices during the 5 years of exposure under the given exposure conditions. Also the molybdenum-alloyed ferritic steel 1.4521 showed good corrosion resistance comparable to the classical austenitic materials 1.4301 and 1.4404.
Autor*innen: | Andreas Burkert, Thoralf MüllerORCiD, Jens Lehmann, Jürgen Mietz |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Materials and Corrosion |
Jahr der Erstveröffentlichung: | 2018 |
Organisationseinheit der BAM: | 7 Bauwerkssicherheit |
7 Bauwerkssicherheit / 7.6 Korrosion und Korrosionsschutz | |
Verlag: | Wiley-VCH Verlag GmbH & Co KGaA |
Verlagsort: | Weinheim |
Jahrgang/Band: | 69 |
Ausgabe/Heft: | 1 |
Erste Seite: | 20 |
Letzte Seite: | 28 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | Corrosion; Free weathering; Marine atmosphere; Stainless steels |
Themenfelder/Aktivitätsfelder der BAM: | Material |
Material / Degradation von Werkstoffen | |
DOI: | 10.1002/maco.201709636 |
ISSN: | 0947-5117 |
ISSN: | 1521-4176 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 08.01.2018 |
Referierte Publikation: | Ja |
Datum der Eintragung als referierte Publikation: | 18.01.2018 |