X-ray hazards and radiation protection aspects in ultrashort laser processing
- Ultrashort pulse laser micromachining at repetition rates of several hundreds of kHz allows a cost-effective high precision manufacturing, which makes this method attractive for many industrial applications. Upon exceeding a critical laser intensity, hard X-ray radiation is generated as a side effect. Even if the emitted X-ray dose per laser pulse is low, for currently available high-repetition-rate laser systems the accumulated X-ray dose becomes significant and radiation safety must be considered. Influences of the processing parameters are discussed and radiation protection aspects will be outlined
Autor*innen: | Jörg KrügerORCiD |
---|---|
Koautor*innen: | Herbert Legall, Jörn BonseORCiD |
Dokumenttyp: | Vortrag |
Veröffentlichungsform: | Präsentation |
Sprache: | Englisch |
Jahr der Erstveröffentlichung: | 2022 |
Organisationseinheit der BAM: | 6 Materialchemie |
6 Materialchemie / 6.2 Material- und Oberflächentechnologien | |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | Radiation protection; Ultrashort pulse laser processing; X-ray emission |
Themenfelder/Aktivitätsfelder der BAM: | Material |
Veranstaltung: | AKL’22 – International Laser Technology Congress |
Veranstaltungsort: | Aachen, Germany |
Beginndatum der Veranstaltung: | 04.05.2022 |
Enddatum der Veranstaltung: | 06.05.2022 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 12.05.2022 |
Referierte Publikation: | Nein |
Eingeladener Vortrag: | Nein |