• Treffer 1 von 9
Zurück zur Trefferliste

Metallurgical investigations on electron beam welded duplex stainless steels

  • Thick-walled components made of duplex stainless steels are used in the semi-finished products as well as in machinery, apparatus and plant construction. Electron beam welding (EBW) of these components may be recommended for economic and quality reasons. To guarantee the necessary mechanical and technological properties and the corrosion resistance, the duplex stainless steels are welded with filler material and afterwards undergo a post-weld heat treatment. The present work shows interim results of investigations concerning the development of an electron beam multi-process technology for welding these steels without filler material and post-weld heat treatment. The studies were performed on standard duplex stainless steel of type 1.4462 (X2CrNiMoN22-5-3). When welding duplex stainless steels, the cooling rate and the chemical composition have a crucial influence on the final result. Based on fundamental investigations relating to the influence of the process parameters on the effusionThick-walled components made of duplex stainless steels are used in the semi-finished products as well as in machinery, apparatus and plant construction. Electron beam welding (EBW) of these components may be recommended for economic and quality reasons. To guarantee the necessary mechanical and technological properties and the corrosion resistance, the duplex stainless steels are welded with filler material and afterwards undergo a post-weld heat treatment. The present work shows interim results of investigations concerning the development of an electron beam multi-process technology for welding these steels without filler material and post-weld heat treatment. The studies were performed on standard duplex stainless steel of type 1.4462 (X2CrNiMoN22-5-3). When welding duplex stainless steels, the cooling rate and the chemical composition have a crucial influence on the final result. Based on fundamental investigations relating to the influence of the process parameters on the effusion of nitrogen and the cooling rates, the resulting austenite formation, mechanical properties and the corrosion resistance were taken into account to develop appropriate electron beam multi-process techniques. The ferrite content was measured metallographically and by magnetic induction, the impact toughness was measured at –40 °C and the determination of critical pitting temperatures was performed using electrochemical noise measurements.zeige mehrzeige weniger

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:S. Krasnorutskyi, D. Keil, S. Schmigalla, M. Zinke, Andreas Heyn, H. Pries
Dokumenttyp:Zeitschriftenartikel
Veröffentlichungsform:Verlagsliteratur
Sprache:Englisch
Titel des übergeordneten Werkes (Englisch):Welding in the world
Jahr der Erstveröffentlichung:2012
Herausgeber (Institution):International Institute of Welding
Verlag:Springer
Verlagsort:Oxford
Jahrgang/Band:56
Ausgabe/Heft:11/12
Erste Seite:34
Letzte Seite:40
Freie Schlagwörter:Duplex; Duplex stainless steels; EB-welding; Ferrit; Ferrite; Fracture toughness; Lochkorrosion; Microstructure; Mikrostruktur; Nichtrostender Stahl; Nitrogen; Pitting corrosion; Schweißen; Schweißwerkstoff; Stickstoff; Weld metal; Welding without filler
DOI:10.1007/BF03321393
ISSN:0043-2288
ISSN:1878-6669
Verfügbarkeit des Dokuments:Physisches Exemplar in der Bibliothek der BAM vorhanden ("Hardcopy Access")
Bibliotheksstandort:Sonderstandort: Publica-Schrank
Datum der Freischaltung:20.02.2016
Referierte Publikation:Ja
Datum der Eintragung als referierte Publikation:11.04.2013
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.