Das Suchergebnis hat sich seit Ihrer Suchanfrage verändert. Eventuell werden Dokumente in anderer Reihenfolge angezeigt.
  • Treffer 1 von 4
Zurück zur Trefferliste

Defect characterisation of tensile loaded CFRP and GFRP laminates used in energy applications by means of infrared thermography

  • The increased use of fibre reinforced plastic (FRP) composites for improved efficiency and reliability in energy related applications, e.g. wind and marine turbine blades, nacelles, oil and gas flexible risers, also increases the demand for innovative non-destructive testing technologies. In this contribution, results concerning the characterisation of CFRP and GFRP during and after quasi-static tensile loading are presented. It includes the measurement of optical properties in the infrared spectral range, tensile loading tests with the observation of the temperature distribution at one or both sides of the specimens using an infrared camera for the preparation and monitoring of intended natural defects, and active thermography inspections after tensile loading. It is shown that the defect preparation was successful. Thermographic monitoring during and active thermography testing after tensile loading enable the detection of the lateral extend of the generated defects. DifferencesThe increased use of fibre reinforced plastic (FRP) composites for improved efficiency and reliability in energy related applications, e.g. wind and marine turbine blades, nacelles, oil and gas flexible risers, also increases the demand for innovative non-destructive testing technologies. In this contribution, results concerning the characterisation of CFRP and GFRP during and after quasi-static tensile loading are presented. It includes the measurement of optical properties in the infrared spectral range, tensile loading tests with the observation of the temperature distribution at one or both sides of the specimens using an infrared camera for the preparation and monitoring of intended natural defects, and active thermography inspections after tensile loading. It is shown that the defect preparation was successful. Thermographic monitoring during and active thermography testing after tensile loading enable the detection of the lateral extend of the generated defects. Differences between CFRP and GFRP materials are discussed.zeige mehrzeige weniger

Volltext Dateien herunterladen

  • Defect characterisation of tensile loaded CFRP and GFRP laminates used in energy applications by means of infrared thermography.pdf
    eng

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Christiane MaierhoferORCiD, Rainer KrankenhagenORCiD, Mathias Röllig, Birgit Rehmer, M. Gower, G. Baker, M. Lodeiro, A. Aktas, C. Monte, A. Adibekyan, B. Gutschwager
Dokumenttyp:Zeitschriftenartikel
Veröffentlichungsform:Verlagsliteratur
Sprache:Englisch
Titel des übergeordneten Werkes (Englisch):Quantitative Inrared Thermography Journal (QIRT)
Jahr der Erstveröffentlichung:2017
Verlag:Taylor and Francis
Verlagsort:London
Jahrgang/Band:15
Ausgabe/Heft:1
Erste Seite:17
Letzte Seite:36
DDC-Klassifikation:Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten
Freie Schlagwörter:Active and passive thermography; Emissivity; Fibre reinforced composites; Tensile loading
DOI:10.1080/17686733.2017.1334312
ISSN:1768-6733
ISSN:2116-7176
Verfügbarkeit des Dokuments:Datei im Netzwerk der BAM verfügbar ("Closed Access")
Datum der Freischaltung:24.07.2017
Referierte Publikation:Ja
Datum der Eintragung als referierte Publikation:12.04.2018
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.