Das Suchergebnis hat sich seit Ihrer Suchanfrage verändert. Eventuell werden Dokumente in anderer Reihenfolge angezeigt.
  • Treffer 4 von 9
Zurück zur Trefferliste

Autoclaving of ultra-high performance concrete (UHPC)

  • By the combination of an optimized granulometry, a reduced water cement ratio and the use of superplasticizers ultra-high performance concrete achieves a compressive strength of over 150 N/mm2 and a high resistance regarding acids and water-soluble salts. In different Research projects the effect of an autoclavation on the mechanical strength and the phase composition was analyzed. In systematic studies, the concrete mix and the process parameters were varied. The results show that autoclavation leads to an improved pozzolanic and hydraulic reaction and significantly improves the mechanical strength compared to a conventional thermal treatment. If a minimum time-span for hydration is ensured, the achievable strength level is not dependent on the prestorage time. However, the duration of the autoclaving is significant. After the Maximum strength is reached there is only a very slight decrease, even if unrealistically long autoclaving times are applied.

Volltext Dateien herunterladen

  • Deckblatt_Impressum_Inhaltsverzeichnis_ICAAC.pdf
    eng
  • von Werder et al._autoclaving of ultra-high performance concrete.pdf
    eng

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Julia von WerderORCiD, Sebastian SimonORCiD, C. Lehmann, C. Selleng, P. Fontana, Birgit MengORCiD
Dokumenttyp:Beitrag zu einem Tagungsband
Veröffentlichungsform:Verlagsliteratur
Sprache:Englisch
Titel des übergeordneten Werkes (Englisch):ICAAC 6th International Conference on Autoclaved Aerated Concrete
Jahr der Erstveröffentlichung:2018
Organisationseinheit der BAM:7 Bauwerkssicherheit
7 Bauwerkssicherheit / 7.1 Baustoffe
Herausgeber (Institution):European Autoclaved Aerated Concrete Association (EAACA)
Verlag:Wilhelm Ernst & Sohn - Verlag für Architektur und technische Wissenschaften GmbH & Co. KG
Verlagsort:Berlin, Germanry
Erste Seite:131
Letzte Seite:136
DDC-Klassifikation:Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten
Freie Schlagwörter:Heat treatment; Hydroxylellestadite; Tobermorite; Ultra-high performance concrete; Zonation
Themenfelder/Aktivitätsfelder der BAM:Material
Veranstaltung:ICAAC 6th International Conference on Autoclaved Aerated Concrete
Veranstaltungsort:Potsdam, Germany
Beginndatum der Veranstaltung:04.09.2018
Enddatum der Veranstaltung:06.09.2018
DOI:10.1002/cepa.866
ISBN:978-3-433-03276-3
Verfügbarkeit des Dokuments:Datei im Netzwerk der BAM verfügbar ("Closed Access")
Datum der Freischaltung:25.10.2018
Referierte Publikation:Nein
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.