Das Suchergebnis hat sich seit Ihrer Suchanfrage verändert. Eventuell werden Dokumente in anderer Reihenfolge angezeigt.
  • Treffer 3 von 54
Zurück zur Trefferliste

Influence of the Length of the Internal Sleeve Valve on the Release of Powdery Substances from the Closures of Valved Bags for Dangerous Goods

  • In practice, checks on dangerous goods transports often detect leaks of powdered dangerous goods from valved bags. In this work, the influence factors of a sudden release of powdery substances from the valves of valved bags were investigated. Drop tests were carried out on paper bags of UN design type 5M2 with internal sleeve valve using two different powdery substances (Esplas H130 and zinc oxide “Rotsiegel”). The internal sleeve valves of all test samples were not sift-proof with respect to both filling substances. For almost all test samples, the Esplas H130 powder already leaked out of pasted joints during manual filling. This is a contradiction to the requirement in UN 6.1.4.18.1, according to which closures and joints of paper bags 5M2 should be sift-proof. In the drop tests, longer valve lengths had a greater sealing effect for both filling substances (for filling degrees of at least 95% and for test samples which had already been mechanically loaded). As an extreme example, atIn practice, checks on dangerous goods transports often detect leaks of powdered dangerous goods from valved bags. In this work, the influence factors of a sudden release of powdery substances from the valves of valved bags were investigated. Drop tests were carried out on paper bags of UN design type 5M2 with internal sleeve valve using two different powdery substances (Esplas H130 and zinc oxide “Rotsiegel”). The internal sleeve valves of all test samples were not sift-proof with respect to both filling substances. For almost all test samples, the Esplas H130 powder already leaked out of pasted joints during manual filling. This is a contradiction to the requirement in UN 6.1.4.18.1, according to which closures and joints of paper bags 5M2 should be sift-proof. In the drop tests, longer valve lengths had a greater sealing effect for both filling substances (for filling degrees of at least 95% and for test samples which had already been mechanically loaded). As an extreme example, at the drop height of 1.20 m and a filling degree of 100%, the released amount of zinc oxide powder from a 10 cm long valve was about 16 times higher than from a valve length of 12.5 cm. The valve length is therefore a safety-relevant parameter and should be specified by the manufacturer. To ensure that only filling goods with similar physical properties in comparison to the test substance are used for valved bags, the user must be informed of the particle size of the test substance.zeige mehrzeige weniger

Volltext Dateien herunterladen

  • 2018-06-21 Presentation IAPRI 2018 China PO158 .pdf
    eng

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Mario Eiben
Koautor*innen:Eva Schlick-Hasper, Björn Drousch, Annika Heinrich, Thomas Goedecke, M. Kraume
Dokumenttyp:Vortrag
Veröffentlichungsform:Präsentation
Sprache:Englisch
Jahr der Erstveröffentlichung:2018
Organisationseinheit der BAM:3 Gefahrgutumschließungen; Energiespeicher
3 Gefahrgutumschließungen; Energiespeicher / 3.1 Sicherheit von Gefahrgutverpackungen und Batterien
DDC-Klassifikation:Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurbau
Freie Schlagwörter:Bags; Dangerous goods packagings; Drop test; Sacks; Sift-proofness
Themenfelder/Aktivitätsfelder der BAM:Infrastruktur
Veranstaltung:21st IAPRI World Conference on Packaging 2018
Veranstaltungsort:Zhuhai, People's Republic of China
Beginndatum der Veranstaltung:20.06.2018
Enddatum der Veranstaltung:22.06.2018
Verfügbarkeit des Dokuments:Datei im Netzwerk der BAM verfügbar ("Closed Access")
Datum der Freischaltung:25.06.2018
Referierte Publikation:Nein
Eingeladener Vortrag:Nein
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.