Numerical investigation on the influence of different substrate materials on the viscoplastic behaviour of flip chip solder bumps
- The finite element method was used to simulate the thermo-mechanical behaviour of a flip chip under thermocyclic loading between -55°C (-67°F) and 125°C (257°F). In order to simulate realistically the inelastic material response of the solder bump, Chaboche's viscoplastic material model instead of a classical ORNL-theory was implemented into the finite element code ABAQUS and applied to a flip chip configuration. This so-called unified constitutive model is able to describe the Bauschinger effect as well as the creep/plasticity interaction. Herewith the influence of the substrate material on the inelastic deformation behaviour of a tin-lead solder bump was analysed. A comparison is given with respect to the influence of the two substrate materials namely Al<sub>2</sub>O<sub>3 </sub> and our self-developed Low Temperature Co-fired Ceramics (LTCC) on the inelastic response of the Sn60Pb40 eutectic solder material. It may be shown that the thermoelastic behaviour of the LTCC substrateThe finite element method was used to simulate the thermo-mechanical behaviour of a flip chip under thermocyclic loading between -55°C (-67°F) and 125°C (257°F). In order to simulate realistically the inelastic material response of the solder bump, Chaboche's viscoplastic material model instead of a classical ORNL-theory was implemented into the finite element code ABAQUS and applied to a flip chip configuration. This so-called unified constitutive model is able to describe the Bauschinger effect as well as the creep/plasticity interaction. Herewith the influence of the substrate material on the inelastic deformation behaviour of a tin-lead solder bump was analysed. A comparison is given with respect to the influence of the two substrate materials namely Al<sub>2</sub>O<sub>3 </sub> and our self-developed Low Temperature Co-fired Ceramics (LTCC) on the inelastic response of the Sn60Pb40 eutectic solder material. It may be shown that the thermoelastic behaviour of the LTCC substrate significantly reduces the cyclic stresses in the bump compared to Al<sub>2</sub>O<sub>3</sub> as well as the cumulative inelastic strain which is responsible for the development of damage and hence flip chip failure…
Autor*innen: | Arno Eberle, Rainer Sievert, Wolfgang Arno Schiller |
---|---|
Dokumenttyp: | Beitrag zu einem Tagungsband |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | International symposium on advanced packaging materials 2000 (Proceedings) |
Jahr der Erstveröffentlichung: | 2000 |
Erste Seite: | 112 |
Letzte Seite: | 117 |
Veranstaltung: | International symposium on advanced packaging materials 2000 |
Veranstaltungsort: | Braselton, Georgia, USA |
Beginndatum der Veranstaltung: | 06.03.2000 |
Enddatum der Veranstaltung: | 08.03.2000 |
DOI: | 10.1109/ISAPM.2000.869253 |
ISBN: | 0-930815-59-9 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 20.02.2016 |
Referierte Publikation: | Nein |