• Treffer 8 von 12
Zurück zur Trefferliste

Corrosion behaviour of stainless steel in contact with ECA-generated disinfectant fluids

  • The generation of active disinfectants by electrochemical processes gains market share due to the lack of need for transportation and storage of dangerous goods as well as the ease of operation. Usually the process involves the use of specific electrodes for electrolysis of water to produce active chlorine species, sometimes supported by addition of chlorides to the process water. The resulting ECA (ElectroChemically Activated) solutions can cause corrosion due to the content of free active chlorine (FAC) or due to the chloride content of the process solution. These fluids are widely used because they show a good chemical and microbiological stability, are well suited for the standard cleaning procedures and allow reducing germ concentrations to meet hygienic standards. The influence of the respective agents to alloy 1.4301 is investigated by storage experiments and by electrochemical investigations. The results show, that the influence of chlorides is higher for short-termThe generation of active disinfectants by electrochemical processes gains market share due to the lack of need for transportation and storage of dangerous goods as well as the ease of operation. Usually the process involves the use of specific electrodes for electrolysis of water to produce active chlorine species, sometimes supported by addition of chlorides to the process water. The resulting ECA (ElectroChemically Activated) solutions can cause corrosion due to the content of free active chlorine (FAC) or due to the chloride content of the process solution. These fluids are widely used because they show a good chemical and microbiological stability, are well suited for the standard cleaning procedures and allow reducing germ concentrations to meet hygienic standards. The influence of the respective agents to alloy 1.4301 is investigated by storage experiments and by electrochemical investigations. The results show, that the influence of chlorides is higher for short-term experiments. ECA-Fluids with low chloride concentrations are preferable. The goal of the investigations is to creat evaluation guidelines for the application parameters to provide a sufficient cleansing effect without causing corrosion of the surfaces.zeige mehrzeige weniger

Volltext Dateien herunterladen

  • Erning Kormat 2016w.pdf
    eng

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Wilhelm Erning, Matthias Dimper, A. Ahrens, S. Reimann
Persönliche Herausgeber*innen:I. Stojanovic, V. Alar, V. Simunovic
Dokumenttyp:Beitrag zu einem Tagungsband
Veröffentlichungsform:Graue Literatur
Sprache:Englisch
Titel des übergeordneten Werkes (Englisch):Proceedings 22. Savjetovanje o zaštiti materijala i industrijskom finišu Kormat 2016
Jahr der Erstveröffentlichung:2016
Herausgeber (Institution):HRVATSKO DRUŠTVO ZA ZAŠTITU MATERIJALA
Verlag:HRVATSKO DRUŠTVO ZA ZAŠTITU MATERIJALA
Verlagsort:Zagreb, Croatia
Erste Seite:43
Letzte Seite:49
DDC-Klassifikation:Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten
Freie Schlagwörter:Disinfection pitting corrosion stainless steel
Veranstaltung:22. Savjetovanje o zaštiti materijala i industrijskom finišu Kormat 2016
Veranstaltungsort:Zagreb, Croatia
Beginndatum der Veranstaltung:20.04.2016
Enddatum der Veranstaltung:20.04.2016
ISSN:1848-4255
Verfügbarkeit des Dokuments:Datei im Netzwerk der BAM verfügbar ("Closed Access")
Datum der Freischaltung:27.04.2016
Referierte Publikation:Nein
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.