Hardystonite bioceramics from preceramic polymers
- In this work, we demonstrated that the hardystonite (Ca2ZnSi2O7) bioceramics can be produced withhigh phase purity, starting from different preceramic polymers and suitable fillers (precursors for CaOand ZnO) after heating at 1200◦C in air. Open-celled hardystonite foams were easily prepared from a filler-containing silicone resin using hydrazine as foaming agent. The fabrication of cellular structures using a preceramic polymer and fillers was possible because the polymeric melt allowed for the entrapment of the gases generated by the decomposition of hydrazine, and the simultaneous cross-linking of the preceramic polymer enabled the retention of the foam structure. Samples with a well-developed hierarchical porous structure, with an open porosity ranging from ∼65 to ∼81 vol% and an average cell window size ranging from 150 to 500 µm were produced. The hardystonite components possessed a compressive strength ranging from ∼1.4 to ∼2.1 MPa.
Autor*innen: | H. Elsayed, Andrea ZoccaORCiD, G. Franchin, E. Bernardo, P. Colombo |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Journal of the European Ceramic Society |
Jahr der Erstveröffentlichung: | 2016 |
Verlag: | Elsevier Ltd. |
Jahrgang/Band: | 2016/36 |
Erste Seite: | 829 |
Letzte Seite: | 835 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | Bioceramics; Hardystonite; Preceramic Polymers; Silicate |
DOI: | 10.1016/j.jeurceramsoc.2015.10.034 |
ISSN: | 0955-2219 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 21.09.2016 |
Referierte Publikation: | Ja |
Datum der Eintragung als referierte Publikation: | 21.09.2016 |