New standard propopsal for determination of steel cleanliness using high frequency ultrasonic testing

  • Due to the market needs on steel for high demanding applications non-destructive methods for the determination of steel cleanliness using ultrasound have to be adapted to increase sensitivity respectively. The basic idea is that the new standard proposal should follow the basic line outs from SEP 1927 and ASTM E588. Additional to these relatives the standard should be open to different types of specimen and inspection frequencies to cover a wide range from bars, rings and plates as well as different inspection sensitivities. For an enhance in resolution the standard draft focuses on immersion focal beam probes which should be selected according to the geometry of the specimen. The selection should be proved with the aid of simulation tools. The frequency shall be at least 10 MHz. For specimen thicknesses of less than 6 mm a frequency of at least 25 MHz shall be used. Calibration procedures had to be improved significantly compared to the old standards to allow proper sizing ofDue to the market needs on steel for high demanding applications non-destructive methods for the determination of steel cleanliness using ultrasound have to be adapted to increase sensitivity respectively. The basic idea is that the new standard proposal should follow the basic line outs from SEP 1927 and ASTM E588. Additional to these relatives the standard should be open to different types of specimen and inspection frequencies to cover a wide range from bars, rings and plates as well as different inspection sensitivities. For an enhance in resolution the standard draft focuses on immersion focal beam probes which should be selected according to the geometry of the specimen. The selection should be proved with the aid of simulation tools. The frequency shall be at least 10 MHz. For specimen thicknesses of less than 6 mm a frequency of at least 25 MHz shall be used. Calibration procedures had to be improved significantly compared to the old standards to allow proper sizing of indications. Therefore calibration procedures shall take signal processing into account. For detailed evaluation of the amplitude dependency and for calibration a reference block with a sufficient number of reflectors has to be used. The recorded echo height shall be directly transferred into an equivalent disc shaped reflector EDSR by a distance amplitude curve. The novelty in this standard draft will be that based on 3D measurements and 3D evaluation the amplitude criterion of an indication becomes just one among some other criteria. This standard takes the signal amplitude, signal amplitude distribution and signal travel time for classification into account. The standard draft will be open to the definition of the volume to be investigated to be set by the user. This will make evaluation more comparable to other methods because the inspected area has to be user defined. We recommend CEN/TC 138 to decide on a work item for this proposal to become an EU and an ISO standard using Vienna agreement. The research leading to these results has received funding from the European Union's Research Fund for Coal and Steel (RFCS) research programme under grant agreement n° RFSR-CT-2013-00014.zeige mehrzeige weniger

Volltext Dateien herunterladen

  • W0430p_t_heckel.pdf
    eng

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Thomas Heckel
Koautor*innen:M. Perez Alonso, M. Dinkel
Dokumenttyp:Vortrag
Veröffentlichungsform:Präsentation
Sprache:Englisch
Jahr der Erstveröffentlichung:2017
DDC-Klassifikation:Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten
Freie Schlagwörter:Standardisation; Steel cleanliness; Ultrasound
Veranstaltung:QNDE 2017
Veranstaltungsort:Provo, UT, USA
Beginndatum der Veranstaltung:17.07.2017
Enddatum der Veranstaltung:20.07.2017
Verfügbarkeit des Dokuments:Datei im Netzwerk der BAM verfügbar ("Closed Access")
Datum der Freischaltung:27.07.2017
Referierte Publikation:Nein
Eingeladener Vortrag:Nein
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.