TY - CONF A1 - Kalinka, Gerhard T1 - Optische Beobachtungen der Faser-Matrix-Trennung im Pull-out-Versuch N2 - Der Vortrag behandelt Rissentstehung und Ausbreitung an Faser-Matrix-Interfaces, untersucht mit dem optischen Mikroskop. T2 - Composites United, CU-Arbeitsgruppe/n Faser-Matrix-Haftung & Matrices CY - Online meeting DA - 02.12.2021 KW - Faser KW - Matrix KW - Pull-out KW - Interface PY - 2021 AN - OPUS4-53968 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trappe, Volker A1 - Kalinka, Gerhard A1 - Loose, Florian T1 - Carbon fibre composites exemplarily research at BAM N2 - Lightweighting as a cross-cutting technology contributes significantly to achieve the European Green Deal goals. Based on, but not limited to, advanced materials and production technologies, the demand for natural resources and CO2 emmissions are reduced by lightweighting during production, as well as use phase. Therefore, lightweighting is a crucial transformation technology assisting in decoupling economic growth from resource consumption. In this manner, lightweighting contributes significantly as a key technology of relevance for many industrial sectors such as energy, mobility, and infrastructure, towards resource efficiency, climate action and economic strength, as well as a resilient Europe. To strengthen international partnerships, addressing global issues of today at the edge of science with high performance lightweight material based on carbon fibers, an overview about the BAM expertise in carbon fiber reinforced materials is given. T2 - Meeting KCarbon CY - Berlin, Germany DA - 15.06.2023 KW - Lightweighting KW - Carbon Fibers KW - Recycling KW - Push-out Test KW - multi scale testing PY - 2023 AN - OPUS4-58094 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalinka, Gerhard A1 - ElAbshihy, K. T1 - Circumventing boundary effects while characterizing epoxy/copper interphases using nanoindentation N2 - Characterization of the size and mechanical properties of interphases is essential when designing multicomponent materials. When nanoindentation is used to investigate the size and mechanical properties of an interphase, a common challenge is that the indenter or the stress zone formed around it are often restricted by the reinforcement, making it difficult to distinguish the mechanical property variations caused by the interphase itself from those caused by the boundary effect. In this work, a testing system was developed that allows determining the indent affected zone and accounting for it in the interphase measurements of an epoxy/Cu system. Using finite element analysis, we confirmed the validity of the proposed system. Nanoindentation was used to investigate the Interphase between copper and two different epoxy systems; amine-cured and anhydride-cured. Nanoindentation results showed that a copper layer that is only 10 nm thick still exhibits a constriction effect on the indentations in its vicinity. The amine-cured epoxy did not show any sign of interphase existence using the introduced method. However, a soft interphase with a thickness of ~1.7 μm was measured on theanhydride-cured epoxy. Furthermore, we show that the proposed system can be used to determine the interphase thickness as well as its relative mechanical properties regardless of the indentation depth. This system can be further used for investigating other polymer/metal interphases to better understand the factors influencing them, thus helping engineer the interphase size and properties to enhance composite performance. KW - Interphase KW - Polymer-metal KW - Epoxy KW - Copper KW - Composites KW - Nanoindentation PY - 2017 U6 - https://doi.org/10.1080/09276440.2017.1286878 SN - 0927-6440 SN - 1568-5543 VL - 24 IS - 9 SP - 833 EP - 848 PB - Taylor & Francis CY - UK AN - OPUS4-39128 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Testing the fibre matrix interface of short glass fibre reinforced PMCs with using the push out technique N2 - With this presentation, the push-out technique is explained. The focus of the experimental work is on the characterization of the fiber-matrix interface of short fiber reinforced composites. The reinforcing component was glass fibers and the matrix polymer was PA6.6 and PPA. It is demonstrated for the first time that the push-out technique ca be applied on injection molded short fiber PMC and is sensitive to the mechanical interface properties. Further studies are planned on the influence of multiple processing, the temperature and humidity. T2 - Composirtes United Workshop „Fiber Matrix Interphases“ CY - Online meeting DA - 09.11.2023 KW - Polymer Matrix Composite KW - Glass Fibres KW - PA6.6 KW - PPA KW - Push-out Test KW - Interface Strength PY - 2023 AN - OPUS4-59053 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Taketa, I. A1 - Kalinka, Gerhard A1 - Gorbatikh, L. A1 - Lomov, S. A1 - Verpoest, I. T1 - Influence of cooling rate on the properties of carbon fiber unidirectional composites with polypropylene, polyamide 6, and polyphenylene sulfide matrices N2 - The longitudinal and transverse strength of three unidirectional thermoplastic prepreg systems: carbon fiber/polypropylene (CF/PP), polyamide 6 (CF/PA6), and polyphenylene sulfide (CF/PPS) are studied and analytical formulas are proposed for the estimation of matrix and fiber/matrix interface properties from composites properties. Since the matrices are semi-crystalline thermoplastics, the influence of cooling rate on the strength is statistically evaluated. While the 0° tensile strength is found to be independent of the cooling rate, the 90° tensile strength is strongly influenced by the matrix type and cooling rate. The matrix modulus increases as the cooling rate is decreased; the degree of crystallinity also increases. The matrix residual stress, interfacial shear strength, and mode II interlaminar fracture toughness are also found to depend on the cooling rate, with the trends different for different matrices. KW - Matrix residual stress KW - Thermoplastic prepreg KW - Unidirectional composites KW - Cooling rate KW - Interfacial strength PY - 2020 U6 - https://doi.org/10.1080/09243046.2019.1651083 SN - 0924-3046 SN - 1568-5519 N1 - Die originale japanische Version des Artikels erschien in: Journal of the Japan Society for Composite Materials, Jg. 44, Nr. 4 (2018), S. 123-128. - The original Japanese version of the article was published in: Journal of the Japan Society for Composite Materials, vol. 44, no. 4 (2018), pp. 123-128. VL - 29 IS - 1 SP - 101 EP - 113 PB - Taylor & Francis CY - London AN - OPUS4-45433 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Michaeli, W. A1 - Baranowski, T. A1 - Kalinka, Gerhard T1 - Einfluss der Mikrostruktur auf den Druck- und Zug-E-Modul teilkristalliner Kunststoffe N2 - In Kooperation zwischen dem Institut für Kunststoffverarbeitung (IKV) und der Bundesanstalt für Materialforschung und -prüfung (BAM) wurde das mechanische Verhalten unter Druck- und Zugbelastung unterschiedlicher morphologischer Strukturen teilkristalliner Thermoplaste (PP und POM) untersucht. Im Ergebnis steigt der E-Modul sowohl der druck- wie auch zugbelasteten Prüfkörper aus spritzgegossenem PP und POM mit gröberem Gefüge an. Probekörper mit scherinduziertem Gefüge zeigen einen hohen Einfluss des Kristallisationsgrads auf den E-Modul. KW - Carbon fibre KW - Nanotubes KW - Hierarchical composites KW - Pull-out test KW - Push-out test PY - 2011 SN - 0025-5300 VL - 53 IS - 10 SP - 616 EP - 628 PB - Hanser CY - München AN - OPUS4-24341 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Micro indentation near stiff-soft phase boundaries T2 - Polydays 2004 CY - Potsdam, Germany DA - 2004-10-04 PY - 2004 AN - OPUS4-4703 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Testing the interface shear strength of carbon fibre reinforced composites T2 - Polydays 2006 CY - Berlin, Germany DA - 2006-10-04 PY - 2006 AN - OPUS4-13804 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hinrichs, Volker A1 - Kalinka, Gerhard A1 - Leistner, André A1 - Hinrichsen, G. T1 - Dynamische Einzelfaserbelastung T2 - Berliner Polymerentage CY - Berlin, Germany DA - 1997-10-09 PY - 1997 AN - OPUS4-12090 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Ermüdungsverhalten von faserverstärkten Thermoplasten T2 - Präsentationsveranstaltung des Berliner Verbands für Polymerforschung CY - Berlin, Germany DA - 1989-05-18 PY - 1989 AN - OPUS4-12094 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Verbundwerkstoffe als Energiespeicher T2 - 4. Umwelt- und Technologietag, Fa. Brose CY - Coburg, Deutschland DA - 2014-09-25 PY - 2014 AN - OPUS4-32039 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian A1 - Kalinka, Gerhard T1 - Failure Processes in Fiber Reinforced Polymers T2 - Thermosets 2009 CY - Berlin, Germany DA - 2009-09-30 PY - 2009 AN - OPUS4-20057 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Schulz, Eckhard A1 - Hampe, Andreas T1 - Untersuchung der Phasenhaftung in Verbundwerkstoffen mit dem Faser-Eindrückversuch T2 - Wissensbörse - Präparationstechnik und Analytik CY - Berlin, Germany DA - 19.02.1998 PY - 1998 AN - OPUS4-12104 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Bestimmung der Interface-Festigkeit in carbonfaserverstärkten Werkstoffen T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Kassel, Germany DA - 06.04.2005 PY - 2005 AN - OPUS4-6085 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Mikromechanik T2 - BAM, DGM Fachausschuss "Gefüge und Eigenschaften von Polymerwerkstoffen" CY - Berlin, Germany DA - 2003-12-05 PY - 2003 AN - OPUS4-4088 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Hampe, Andreas T1 - Charakterisierung des Faser-Matrix-Interface mit dem Indentation-Test T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Bayreuth, Germany DA - 1995-10-24 PY - 1995 AN - OPUS4-12097 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Mikromechanische Methoden zur Messung der Faser-Matrix-Haftung in Polymermatrix-Verbundwerkstoffen T2 - Kolloquium des Fraunhofer IZM CY - Teltow, Germany DA - 2007-07-20 PY - 2007 AN - OPUS4-15858 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Hinrichsen, G. T1 - Computersimulation der lamellar-shpärolithischen Kristallisation bei Polymeren T2 - 5. Berliner Polymeren-Tage CY - Potsdam, Germany DA - 1994-10-05 PY - 1994 AN - OPUS4-12007 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Hampe, Andreas T1 - Charakterisierung des Faser-Matrix-Interface mit dem Indentation-Test T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Bayreuth, Germany DA - 1995-10-25 PY - 1995 AN - OPUS4-12008 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Bestimmung der Interface-Festigkeit oder -Trennarbeit mit dem Pull-out-Versuch T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Kassel, Germany DA - 2005-04-06 PY - 2005 AN - OPUS4-6084 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Marotzke, Christian T1 - Local mechanical relaxation time spectroscopy with using the nano indentation technique T2 - THERMOSETS 2009 CY - Berlin, Germany DA - 2009-10-01 PY - 2009 AN - OPUS4-20123 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Hampe, Andreas T1 - Charakterisierung des Interface-Versagens in Faserverbundwerkstoffen mit mikromechanischen Testmethoden T2 - 5. Berliner Polymeren-Tage CY - Potsdam, Germany DA - 1994-10-05 PY - 1994 AN - OPUS4-12096 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Single Fiber Pull-out Test T2 - 4th International CFK-Valley Stade Convention CY - Stade, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-23289 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Bohse, Jürgen A1 - Kalinka, Gerhard A1 - Schulz, Eckhard T1 - Bruchzähigkeit und Phasenhaftung von unidirektionalen PP/GF-Verbunden T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Kaiserslautern, Germany DA - 1997-09-17 PY - 1997 AN - OPUS4-12088 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Schulz, Eckhard T1 - Monitoring the interface crack propagation with micromechanical test devices T2 - Interfacial Phenomena in Composite Materials CY - Berlin, Germany DA - 2001-01-28 PY - 2001 AN - OPUS4-12107 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Marotzke, Christian T1 - mechanical properties of the fibre/matrix interface region of composite materials T2 - Eingeladener Vortrag Katholike Universitaet Leuven CY - Leuven, Belgium DA - 2010-07-01 PY - 2010 AN - OPUS4-23078 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Sonderprüfverfahren für Verbundwerkstoffe T2 - Vortragsveranstaltung VDI-AK Kunststofftechnik, BV BB an der TU Berlin CY - Berlin, Deutschland DA - 2011-03-17 PY - 2011 AN - OPUS4-34456 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Boro, I. A1 - Hinrichsen, G. A1 - Hampe, Andreas T1 - Untersuchungs des Ermüdungsverhaltens glasfaserverstärkter Thermoplaste mittels Schwingungsmessungen T2 - Zweites Werkstoffsymposium Neue Verbundwerkstoffe CY - Regensburg, Germany DA - 1990-10-05 PY - 1990 AN - OPUS4-12127 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalinka, Gerhard A1 - Hinrichsen, G. T1 - Two-dimensional computer simulation of spherulite formation by branching lamellae KW - Thermoplaste KW - Kristallisation KW - Sphärolithe KW - Lamellen KW - Modellrechnungen PY - 1997 SN - 0323-7648 SN - 1521-4044 VL - 48 SP - 256 EP - 261 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-12004 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Hampe, Andreas A1 - Marotzke, Christian T1 - Charakterisierung des Interface-Versagens in Faserverbundwerkstoffen mit mikromechanischen Testmethoden T2 - 5. Berliner Polymeren Tage CY - Potsdam, Germany DA - 1994-10-05 PY - 1994 AN - OPUS4-5910 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Schulz, Eckhard T1 - Der Einfluss der Transkristallisation auf die scheinbare Scherfestigkeit von kohlefaserverstärktem Polyphenylensulid (PPS) mit der Einzelfaserauszugsmethode T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Bayreuth, Germany DA - 1995-10-24 PY - 1995 AN - OPUS4-12099 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalinka, Gerhard A1 - Boro, I. A1 - Augustin, G. A1 - Hampe, Andreas A1 - Hinrichsen, G. T1 - Ermüdungsverhalten von Hochleistungs-Faserverbundwerkstoffen mit thermoplastischer Matrix KW - Verbundwerkstoffe KW - Ermüdung KW - Biegeschwingung KW - Thermoplaste KW - Glasfaser PY - 1990 SN - 0023-5563 VL - 80 IS - 5 SP - 626 EP - 630 PB - Hanser CY - München AN - OPUS4-11996 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Marotzke, Christian T1 - Bestimmung zeitabhängiger lokaler Eigenschaften von Polymeren mit der Nano-Indentationstechnik T2 - 15. Nationales SAMPE Symposium, BAM CY - Berlin, Germany DA - 2009-02-18 PY - 2009 AN - OPUS4-19013 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Kalinka, Gerhard T1 - An Advanced Indentation Technique for the Characterization of the Fibre-Matrix Interface T2 - Gordon Conference on Composites CY - San Buenaventura, CA, USA DA - 1997-01-05 PY - 1997 AN - OPUS4-12102 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Schulz, Eckhard T1 - Energy Quantification of Interface Debonding Processes Using 'Stiff' Test Devices T2 - Gordon Conference on Composite Materials CY - San Buenaventura, CA, USA DA - 2001-01-28 PY - 2001 AN - OPUS4-12108 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Meretz, S. A1 - Hampe, Andreas T1 - Pull-out of Single Fibres KW - Verstärkungsfaser KW - Verbundwerkstoffe KW - Interface KW - Adhäsion KW - Reibung KW - Haftung KW - Thermoplast PY - 1994 SN - 0945-0084 VL - 84 IS - 5 SP - 25 EP - 26 PB - Hanser CY - München AN - OPUS4-11989 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Meretz, S. A1 - Hampe, Andreas T1 - Einzelfaserauszug - Eine Methode zum Bestimmen der Grenzflächenfestigkeit KW - Verstärkungsfaser KW - Verbundwerkstoffe KW - Interface KW - Adhäsion KW - Reibung KW - Haftung KW - Thermoplast PY - 1994 SN - 0023-5563 VL - 84 IS - 5 SP - 608 EP - 610 PB - Hanser CY - München AN - OPUS4-11994 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Bestimmung der Haftfestigkeit in Verbundwerkstoffen mittels Indentations- und Durchdrückexperimenten T2 - DGM Fachausschuss "Gefüge und Eigenschaften von Polymerwerkstoffen" CY - Hamburg, Germany DA - 2004-11-26 PY - 2004 AN - OPUS4-4705 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Marotzke, Christian A1 - Kalinka, Gerhard T1 - Mechanische Messungen der Bruchzähigkeit des Faser-Matrix-Grenzbereiches in polymeren Verbundwerkstoffen T2 - 35. Internationale Chemiefaser-Tagung CY - Dornbirn, Austria DA - 1996-09-25 PY - 1996 AN - OPUS4-5922 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Prüfung der Faser-Matrix-Wechselwirkung in Kompositen mittels Einzelfaser push- und pull-out Methoden T2 - 4. Wildauer Duromer-Tagung, TH Wildau CY - Wildau, Deutschland DA - 2014-03-03 PY - 2014 AN - OPUS4-32036 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Carbonfaserverstärkte Polymere als Energiespeicher T2 - 47. Metallurgisches Seminar "Materialien für die Energieerzeugung, -nutzung und -speicherung" CY - Wernigerode, Deutschland DA - 2014-11-11 PY - 2014 AN - OPUS4-32041 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Kalinka, Gerhard A1 - Schulz, Ulrich T1 - Simulation von Kratzeinwirkungen am Beispiel bewitterter Polymerwerkstoffe T2 - 32. Jahrestagung der GUS (Gesellschaft für Umweltsimulation) CY - Pfinztal, Germany DA - 2003-03-26 PY - 2003 AN - OPUS4-4032 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hinrichsen, G. A1 - Kalinka, Gerhard A1 - Marotzke, Christian T1 - Computer simulation of spherulitic formation and crystallization in semicrystalline polymers T2 - Europhysics Conference on Macromolecular Physics CY - Prague, Czech Republic DA - 1995-07-17 PY - 1995 AN - OPUS4-12085 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Micro indentation near stiff-soft boundaries T2 - "Nanomech5, 5th European Symposium on nano-Mechanical Testing" CY - Hückelhoven, Germany DA - 2004-09-07 PY - 2004 AN - OPUS4-4704 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian A1 - Bohse, Jürgen A1 - Kalinka, Gerhard T1 - Local failure processes in fiber reinforced polymers T2 - International Conference on Composite Materials (ICCM17) CY - Edinburgh, Scotland DA - 2009-07-27 PY - 2009 AN - OPUS4-18372 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Hampe, Andreas A1 - Schulz, Eckhard T1 - Energy based characterization of the fiber-matrix interface unsing the pull-out and the push-out test T2 - Micro Mat '97 CY - Berlin, Germany DA - 1997-04-16 PY - 1997 AN - OPUS4-12100 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian A1 - Kalinka, Gerhard T1 - Interface Faser-Matrix - welche Rolle spielt das Interface bei der Festigkeit von Faserverbundwerkstoffen T2 - 15. Nationales SAMPE Symposium, BAM CY - Berlin, Germany DA - 2009-02-18 PY - 2009 AN - OPUS4-19016 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meretz, S. A1 - Lahser, K. A1 - Lehmann, V. A1 - Kalinka, Gerhard A1 - Hampe, Andreas T1 - Kristallisationskinetik bei Faserverbundwerkstoffen T2 - Kolloquium der Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin, Germany DA - 1993-10-01 PY - 1993 AN - OPUS4-12128 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Energy orientated data interpretation of pull-out and push-out test for the investigation of residual stresses T2 - Interface Phenomena in Composite Materials CY - Berlin, Germany DA - 1999-09-08 PY - 1999 AN - OPUS4-12093 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Hampe, Andreas T1 - Interfacial properties and their determination by using stiffness optimized test devices T2 - Workshop on Micro-Mechanics Measurement Technologies, NIST CY - Gaithersburg, MD, USA DA - 1997-05-28 PY - 1997 AN - OPUS4-12103 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -