TY - CONF A1 - Hampe, Andreas A1 - Bohse, Jürgen A1 - Kalinka, Gerhard A1 - Schulz, Eckhard T1 - Bruchzähigkeit und Phasenhaftung von unidirektionalen PP/GF-Verbunden T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Kaiserslautern, Germany DA - 1997-09-17 PY - 1997 AN - OPUS4-12088 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalinka, Gerhard A1 - Boro, I. A1 - Augustin, G. A1 - Hampe, Andreas A1 - Hinrichsen, G. T1 - Ermüdungsverhalten von Hochleistungs-Faserverbundwerkstoffen mit thermoplastischer Matrix KW - Verbundwerkstoffe KW - Ermüdung KW - Biegeschwingung KW - Thermoplaste KW - Glasfaser PY - 1990 SN - 0023-5563 VL - 80 IS - 5 SP - 626 EP - 630 PB - Hanser CY - München AN - OPUS4-11996 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Kalinka, Gerhard T1 - An Advanced Indentation Technique for the Characterization of the Fibre-Matrix Interface T2 - Gordon Conference on Composites CY - San Buenaventura, CA, USA DA - 1997-01-05 PY - 1997 AN - OPUS4-12102 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Meretz, S. A1 - Hampe, Andreas T1 - Pull-out of Single Fibres KW - Verstärkungsfaser KW - Verbundwerkstoffe KW - Interface KW - Adhäsion KW - Reibung KW - Haftung KW - Thermoplast PY - 1994 SN - 0945-0084 VL - 84 IS - 5 SP - 25 EP - 26 PB - Hanser CY - München AN - OPUS4-11989 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Meretz, S. A1 - Hampe, Andreas T1 - Einzelfaserauszug - Eine Methode zum Bestimmen der Grenzflächenfestigkeit KW - Verstärkungsfaser KW - Verbundwerkstoffe KW - Interface KW - Adhäsion KW - Reibung KW - Haftung KW - Thermoplast PY - 1994 SN - 0023-5563 VL - 84 IS - 5 SP - 608 EP - 610 PB - Hanser CY - München AN - OPUS4-11994 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Marotzke, Christian A1 - Kalinka, Gerhard T1 - Mechanische Messungen der Bruchzähigkeit des Faser-Matrix-Grenzbereiches in polymeren Verbundwerkstoffen T2 - 35. Internationale Chemiefaser-Tagung CY - Dornbirn, Austria DA - 1996-09-25 PY - 1996 AN - OPUS4-5922 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalinka, Gerhard A1 - Boro, I. A1 - Augustin, G. A1 - Hampe, Andreas A1 - Hinrichsen, G. T1 - Fatigue Behaviour of High-Performance Fibre-Reinforced Composites with a Thermoplastic Matrix KW - Verbundwerkstoffe KW - Ermüdung KW - Biegeschwingung KW - Thermoplaste KW - Glasfaser PY - 1990 SN - 0723-0192 VL - 80 IS - 5 SP - 36 EP - 38 PB - Hanser CY - Munich AN - OPUS4-11999 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Kalinka, Gerhard T1 - Energy based characterization of the fibre-matrix interface using the pull-out and push-in test T2 - Interfacial Phenomena in Composite Materials 97 CY - Eger, Hungary DA - 1997-03-01 PY - 1997 AN - OPUS4-12087 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Kalinka, Gerhard A1 - Schulz, Eckhard A1 - Meretz, S. T1 - An Advanced Equipment for Single-Fibre Pull-Out test designed to monitor the fracture process T2 - Interfacial Phenomena in Composite Materials CY - Cambridge, England DA - 1993-09-13 PY - 1993 AN - OPUS4-12095 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hampe, Andreas A1 - Kalinka, Gerhard A1 - Meretz, S. A1 - Schulz, Eckhard T1 - An advanced equipment for single-fibre pull-out test designed to monitor the fracture process KW - Verbundwerkstoffe KW - Thermoplaste KW - Adhäsion KW - Reibung KW - Haftung KW - Interface KW - Schubfestigkeit KW - Scherfestigkeit KW - Messmethode PY - 1995 SN - 0010-4361 VL - 26 IS - 1 SP - 40 EP - 46 PB - Butterworth-Heinemann CY - Guildford, Surrey AN - OPUS4-11988 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Marotzke, Christian A1 - Brzezinka, Klaus-Werner A1 - Kalinka, Gerhard A1 - Schulz, Eckhard T1 - The Fracture Process in the Fibre/Matrix Interphase T2 - The Fifth International Conference on Composite Interfaces CY - Gothenburg, Sweden DA - 1994-07-20 PY - 1994 AN - OPUS4-5908 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Kalinka, Gerhard A1 - Schulz, Eckhard T1 - The Fracture Process in the Interphase Investigated by the Single Fiber Pull-out Test T2 - Composites Testing and Standardisation ECCM-CTS 2 CY - Hamburg, Germany DA - 1994-09-13 PY - 1994 AN - OPUS4-12009 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Marotzke, Christian A1 - Kalinka, Gerhard T1 - Measurement of the Interfacial Toughness in Composites by Micromechanical Experiments T2 - 4th Arab International Conference on Polymer Science & Technology CY - Cairo, Egypt DA - 1997-09-08 PY - 1997 AN - OPUS4-5929 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Kalinka, Gerhard A1 - Marotzke, Christian T1 - The Single Fibre Pull-Out Test Performed with a Microcomposite Sample T2 - The Seventh International Conference on Composite Interfaces - ICCI-VII CY - Fujisawa, Kanagawa, Japan DA - 1998-05-10 PY - 1998 AN - OPUS4-5940 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Kalinka, Gerhard A1 - Marotzke, Christian T1 - Comparison of the Interfacial Toughness Measured by the Single Fibre Pull-Out, the Indentation and the Fragmentation Test T2 - NIST, Workshop on Micro-Mechanics Measurement Technologies for Fiber-Polymer Interfaces CY - Gaithersburg, MD, USA DA - 1997-05-28 PY - 1997 AN - OPUS4-5928 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalinka, Gerhard A1 - Leistner, André A1 - Hampe, Andreas T1 - Characterisation of the fibre/matrix interface in reinforced polymers by the push-in technique N2 - The push-in test is the only micromechanical test method that is not restricted to artificial fibre/matrix arrangements, but allows the in situ characterisation of interfaces in composites fabricated and stressed under realistic conditions. However, with the application of this method to reinforced polymers some problems arise both in the mathematical model for evaluating test data and in the practical performance of the test. Because in some cases the deformation of the relatively compliant polymeric matrices cannot be neglected, an extension of the existing model is required. For this purpose, the elastic energy of the material around the debonded part of the fibre is estimated and included in the energy-balance analysis. Because of the small diameter of the fibres usually used for reinforcing polymers, a test apparatus was designed which ensures a high positioning accuracy in the xy plane as well as in the z direction. In order to minimise thermal and mechanical influences, the microscope for fibre selection and the force sensor/indenter are directly connected together and the apparatus is designed to be stiff in all components. A solid-state bending joint guarantees very precise control of the axial movement. Three examples of the application of this easy-to-handle and low-cost test apparatus are presented briefly in the paper: assess fibre/matrix combinations, measures to improve the interfacial adhesion and the influence of water on the interface. KW - Interface KW - Test method KW - Characterisation KW - Indentation KW - Push-in PY - 1997 SN - 0266-3538 VL - 57 IS - 8 SP - 845 EP - 851 PB - Elsevier CY - Barking AN - OPUS4-12011 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -