TY - JOUR A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Meretz, S. A1 - Hampe, Andreas T1 - Pull-out of Single Fibres KW - Verstärkungsfaser KW - Verbundwerkstoffe KW - Interface KW - Adhäsion KW - Reibung KW - Haftung KW - Thermoplast PY - 1994 SN - 0945-0084 VL - 84 IS - 5 SP - 25 EP - 26 PB - Hanser CY - München AN - OPUS4-11989 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Meretz, S. A1 - Hampe, Andreas T1 - Einzelfaserauszug - Eine Methode zum Bestimmen der Grenzflächenfestigkeit KW - Verstärkungsfaser KW - Verbundwerkstoffe KW - Interface KW - Adhäsion KW - Reibung KW - Haftung KW - Thermoplast PY - 1994 SN - 0023-5563 VL - 84 IS - 5 SP - 608 EP - 610 PB - Hanser CY - München AN - OPUS4-11994 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hampe, Andreas A1 - Kalinka, Gerhard A1 - Meretz, S. A1 - Schulz, Eckhard T1 - An advanced equipment for single-fibre pull-out test designed to monitor the fracture process KW - Verbundwerkstoffe KW - Thermoplaste KW - Adhäsion KW - Reibung KW - Haftung KW - Interface KW - Schubfestigkeit KW - Scherfestigkeit KW - Messmethode PY - 1995 SN - 0010-4361 VL - 26 IS - 1 SP - 40 EP - 46 PB - Butterworth-Heinemann CY - Guildford, Surrey AN - OPUS4-11988 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Eckhard A1 - Kalinka, Gerhard T1 - Effect of Transcrystallization in Carbon Fibre Reinforced Poly(p-phenylene sulfide) Composites on the Interfacial Shear Strength Investigated with the Single Fibre Pull-out Test T2 - Europhysics Conference on Macromolecular Physics CY - Prague, Czech Republic DA - 1995-07-17 PY - 1995 AN - OPUS4-12084 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hinrichs, V. A1 - Leistner, A. A1 - Kalinka, Gerhard A1 - Schulz, Eckhard A1 - Hinrichsen, G. T1 - Viscoelastic properties of the interphase in fibre reinforced polymers - measurement and simulation KW - Polymer KW - Glass fibre KW - Interphase KW - Coating KW - Glass transition KW - Dynamic KW - Viscoelastic PY - 1999 VL - 6 IS - 2 SP - 93 EP - 101 PB - North-Holland CY - New York, NY AN - OPUS4-12003 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Sturm, Heinz A1 - Munz, Martin T1 - Investigation on mechanical behaviour of heterogeneous polymeric systems and fibre reinforced composites using micro indentation and scanning force microscopy T2 - 18th Disc. Conf. and 56th PMM CY - Prague, Czech Republic DA - 1998-07-20 PY - 1998 AN - OPUS4-6451 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Leistner, André A1 - Sturm, Heinz A1 - Munz, Martin A1 - Hampe, Andreas T1 - Investigation of polymeric composites reinforced with high oriented short glass fibres using the single fibre push-out test T2 - Euro-Conf. Surfaces and Interfaces in Polymers and Composites CY - Lausanne, Switzerland DA - 1997-06-03 PY - 1997 AN - OPUS4-6439 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Sturm, Heinz A1 - Munz, Martin T1 - Investigations of the mechanical behaviour of heterogeneous polymeric systems and fibre reinforced composites using micro indentation and scanning force microscopy T2 - Special Lectures, 18. Disc. Conf. And 56the PMM.: Mech. Behaviour of polymeric materials CY - Prague, Czech Republic DA - 1998-07-20 PY - 1998 AN - OPUS4-12092 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Auersch, W. T1 - Effect of Transcrystallization in Carbon Fiber Reinforced Poly(p/phenylene sulfide) Composites on the Interfacial Shear Strength Investigated with the Single Fiber Pull-Out Test N2 - The effect of transcrystallinity in carbon fiber reinforced poly(p-phenylene sulfide (PPS) composites on the apparent shear strength was investigated with the single fiber pull-out test. Transcrystalline zones around the reinforcing fibers do not seem to improve the adhesion level significantly. Neighbor fibers hinder the formation of the transcrystalline zone and a ductile fracture behavior can be observed. However, the apparent strength level is slightly higher for composites containing such reinforcing neighbor fibers compared with single fiber composite samples. During annealing a brittle interface can be formed in the multifiber composite yielding a higher level of the apparent shear strength. KW - Thermoplaste KW - Kristallisation KW - Transkristallisation KW - Interface KW - Verbundwerkstoffe KW - Pull-out KW - Haftung KW - Adhäsion KW - Reibung PY - 1996 U6 - https://doi.org/10.1080/00222349608220393 SN - 0022-2348 SN - 1525-609X VL - 35 IS - 3-4 SP - 527 EP - 546 PB - Dekker Chemistry CY - New York, NY AN - OPUS4-11987 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ho, K.K.C. A1 - Lamoriniere, S. A1 - Kalinka, Gerhard A1 - Schulz, Eckhard A1 - Bismarck, A. T1 - Interfacial behavior between atmospheric-plasma-fluorinated carbon fibers and poly(vinylidene fluoride) N2 - Atmospheric-plasma fluorination was used to introduce fluorine functionalities onto the surface of carbon fibers without affecting their bulk properties. The interfacial adhesion between atmospheric-plasma-fluorinated carbon fibers and poly(vinylidene fluoride) (PVDF) was studied by means of direct wetting measurements and single fiber pullout tests. Measured contact angles of PVDF melt droplets on modified carbon fibers show that short exposure times of carbon fibers to atmospheric-plasma fluorination (corresponding to a degree of surface fluorination of F/C = 0.01 (1.1%)) leads to improved wettability of the fibers by PVDF melts. The apparent interfacial shear strength as a measure of practical adhesion, determined by the single-fiber pullout test, increases by 65% under optimal treatment conditions. The improved practical adhesion is not due to the formation of transcrystalline regions around the fibers or a change of the bulk matrix crystallinity or to an increased surface roughness; it seems to be due to the compatibilization of the interface caused of the atmospheric-plasma fluorination of the carbon fibers. KW - Carbon fibers KW - Fluorination KW - Contact angle KW - Interface KW - Adhesion KW - Surface area KW - Fiber properties PY - 2007 U6 - https://doi.org/10.1016/j.jcis.2007.04.076 SN - 0021-9797 SN - 1095-7103 VL - 313 IS - 2 SP - 476 EP - 484 PB - Elsevier CY - Orlando, Fla. AN - OPUS4-16026 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - Local AC current contrast on carbon fiber surfaces imaged by scanning force microscopy N2 - After a delamination process in a C-fiber reinforced polymer composite, the identification of the polymer residue of poly-(phenylene sulphide) on carbon fiber surfaces gives important information on the composite failure mechanism. Using scanning force microscopy (SFM) in its lateral force imaging mode or with the stiffness imaging mode, it is almost impossible to distinguish the two composite components owing to a very low material-based contrast of the local friction and compliance. The new technique using contrast based on a local AC current measurement allows a clear identification of the conducting carbon fiber and the non-conducting polymer coverage. KW - Matrix adhesion KW - Films KW - Photoconduction KW - Composites PY - 1995 U6 - https://doi.org/10.1002/actp.1995.010460505 SN - 0323-7648 SN - 1521-4044 VL - 46 IS - 5 SP - 379 EP - 384 PB - Wiley-VCH Verl. CY - Weinheim, Germany AN - OPUS4-6848 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -