TY - CONF A1 - Trappe, Volker A1 - Kalinka, Gerhard A1 - Loose, Florian T1 - Carbon fibre composites exemplarily research at BAM N2 - Lightweighting as a cross-cutting technology contributes significantly to achieve the European Green Deal goals. Based on, but not limited to, advanced materials and production technologies, the demand for natural resources and CO2 emmissions are reduced by lightweighting during production, as well as use phase. Therefore, lightweighting is a crucial transformation technology assisting in decoupling economic growth from resource consumption. In this manner, lightweighting contributes significantly as a key technology of relevance for many industrial sectors such as energy, mobility, and infrastructure, towards resource efficiency, climate action and economic strength, as well as a resilient Europe. To strengthen international partnerships, addressing global issues of today at the edge of science with high performance lightweight material based on carbon fibers, an overview about the BAM expertise in carbon fiber reinforced materials is given. T2 - Meeting KCarbon CY - Berlin, Germany DA - 15.06.2023 KW - Lightweighting KW - Carbon Fibers KW - Recycling KW - Push-out Test KW - multi scale testing PY - 2023 AN - OPUS4-58094 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Testing the fibre matrix interface of short glass fibre reinforced PMCs with using the push out technique N2 - With this presentation, the push-out technique is explained. The focus of the experimental work is on the characterization of the fiber-matrix interface of short fiber reinforced composites. The reinforcing component was glass fibers and the matrix polymer was PA6.6 and PPA. It is demonstrated for the first time that the push-out technique ca be applied on injection molded short fiber PMC and is sensitive to the mechanical interface properties. Further studies are planned on the influence of multiple processing, the temperature and humidity. T2 - Composirtes United Workshop „Fiber Matrix Interphases“ CY - Online meeting DA - 09.11.2023 KW - Polymer Matrix Composite KW - Glass Fibres KW - PA6.6 KW - PPA KW - Push-out Test KW - Interface Strength PY - 2023 AN - OPUS4-59053 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Testing the interface shear strength of carbon fibre reinforced composites T2 - Polydays 2006 CY - Berlin, Germany DA - 2006-10-04 PY - 2006 AN - OPUS4-13804 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rabe, Torsten A1 - Schulz, Bärbel A1 - Kalinka, Gerhard T1 - Deformation behavior of alumina and zirconia springs at room temperature N2 - At high temperatures and in harsh environments ceramic springs are often superior to metallic springs and allow for innovative solutions. A recently proposed application involves ceramic springs with metallized surfaces as capacitive force sensor. A strictly linear stress-strain characteristic of the spring is a precondition for such a sensor. Helical ceramic springs with rectangular cross-section have been produced from sintered hollow cylinders. Alumina, ATZ, Y-TZP, and Ce-TZP springs with identical dimensions were characterized and compared regarding deformation behavior. Spring deformation was investigated under various load scenarios. Dynamic compression was performed with deformation speeds from 0.3 to 30 mm/min. Spring constants of alumina springs are strain rate independent. By contrast, Y-TZP spring constant increases by approximately 3 % within the experimental framework. A high-precision test facility was developed to characterize spring displacement in nm range under static tensile load over long periods of time. Spring elongation with asymptotic course was observed for zirconia containing materials at room temperature. This effect is particularly strong in the case of Y-TZP. Up to 0.3 % time-dependent elongation was measured after 24 h under constant load. Deformation is completely reversible after unloading. Alumina springs do not show any time-dependent deformation under identical test conditions. Contrary to alumina springs, a non-linear stress-strain behavior of TZP springs at room temperature was proved in both test series. It is supposed, that pseudo-elasticity caused by stress-induced phase transformation from tetragonal to monoclinic is responsible for this special behavior of TZP springs. T2 - D-A-CH Keramiktagung CY - Leoben, Austria DA - 06.05.2019 KW - Phase transformation KW - Ceramic spring KW - Force-distance diagram KW - Deformation behavior PY - 2019 AN - OPUS4-48026 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hinrichsen, G. A1 - Kalinka, Gerhard A1 - Marotzke, Christian T1 - Computer simulation of spherulitic formation and crystallization in semicrystalline polymers T2 - Europhysics Conference on Macromolecular Physics CY - Prague, Czech Republic DA - 1995-07-17 PY - 1995 AN - OPUS4-12085 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Energy orientated data interpretation of pull-out and push-out test for the investigation of residual stresses T2 - Interface Phenomena in Composite Materials CY - Berlin, Germany DA - 1999-09-08 PY - 1999 AN - OPUS4-12093 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - A model of spherulitic crystallization based on growing lameallae T2 - 9th Microsymposium of Electron Microscopy in Materials Science CY - Lutherstadt Wittenberg, Germany DA - 2004-05-06 PY - 2004 AN - OPUS4-4702 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Micro indentation and scratch tests for surface characterisation T2 - XXII. Donauländergespräche über die natürliche und künstliche Alterung von Polymeren CY - Berlin, Germany DA - 2001-09-17 PY - 2001 AN - OPUS4-7506 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Kalinka, Gerhard T1 - Energy based characterization of the fibre-matrix interface using the pull-out and push-in test T2 - Interfacial Phenomena in Composite Materials 97 CY - Eger, Hungary DA - 1997-03-01 PY - 1997 AN - OPUS4-12087 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Leistner, André A1 - Schulz, Eckhard T1 - Friction Measurement on fiber reinforced polymer composites with using the indentation technique T2 - European Conference on Composite Materials ECCM-8 CY - Naples, Italy DA - 1998-06-03 PY - 1998 AN - OPUS4-12089 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Marotzke, Christian A1 - Brzezinka, Klaus-Werner A1 - Kalinka, Gerhard A1 - Schulz, Eckhard T1 - The Fracture Process in the Fibre/Matrix Interphase T2 - The Fifth International Conference on Composite Interfaces CY - Gothenburg, Sweden DA - 1994-07-20 PY - 1994 AN - OPUS4-5908 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Kalinka, Gerhard A1 - Schulz, Eckhard T1 - The Fracture Process in the Interphase Investigated by the Single Fiber Pull-out Test T2 - Composites Testing and Standardisation ECCM-CTS 2 CY - Hamburg, Germany DA - 1994-09-13 PY - 1994 AN - OPUS4-12009 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Leistner, André A1 - Hampe, Andreas T1 - Characterization of the fibre-matrix interface with the indentation technique T2 - 6th International Conference on Composite Interfaces (ICCI-VI) CY - Zichron Ya'akov, Israel DA - 1996-05-05 PY - 1996 AN - OPUS4-12086 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Marotzke, Christian A1 - Kalinka, Gerhard T1 - Measurement of the Interfacial Toughness in Composites by Micromechanical Experiments T2 - 4th Arab International Conference on Polymer Science & Technology CY - Cairo, Egypt DA - 1997-09-08 PY - 1997 AN - OPUS4-5929 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hinrichsen, G. A1 - Hinrichs, V. A1 - Kalinka, Gerhard A1 - Leistner, André A1 - Macht, Christian A1 - Schulz, Eckhard A1 - Yu, Erkang T1 - The Fiber/Matrix Interphase: New Insights into an old Problem T2 - INTERNATIONAL CONFERENCES ON POLYMER CHARACTERIZATION POLYCHAR-6 CY - Denton, TX, USA DA - 1998-01-07 PY - 1998 AN - OPUS4-12006 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Kalinka, Gerhard A1 - Marotzke, Christian T1 - The Single Fibre Pull-Out Test Performed with a Microcomposite Sample T2 - The Seventh International Conference on Composite Interfaces - ICCI-VII CY - Fujisawa, Kanagawa, Japan DA - 1998-05-10 PY - 1998 AN - OPUS4-5940 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Eckhard A1 - Kalinka, Gerhard T1 - Effect of Transcrystallization in Carbon Fibre Reinforced Poly(p-phenylene sulfide) Composites on the Interfacial Shear Strength Investigated with the Single Fibre Pull-out Test T2 - Europhysics Conference on Macromolecular Physics CY - Prague, Czech Republic DA - 1995-07-17 PY - 1995 AN - OPUS4-12084 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian A1 - Kalinka, Gerhard T1 - Microscopical failure processes in fiber reinforced polymers - Mechanical aspects of the adhesion between fiber and matrix T2 - 11th International Conference on Mechanics and Technology of Composite Materials CY - Sofia, Bulgaria DA - 2006-10-02 PY - 2006 AN - OPUS4-13239 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Bismarck, A. T1 - Evaluation of the Adhesion Behaviour of Optical Fibers for Sensors Embedded in Cementitiuos Materials T2 - International Workshop on Fiber Optic Sensors for Construction Materials and Bridges CY - Newark, NJ, USA DA - 1998-05-03 PY - 1998 AN - OPUS4-12091 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Sturm, Heinz A1 - Munz, Martin T1 - Investigation on mechanical behaviour of heterogeneous polymeric systems and fibre reinforced composites using micro indentation and scanning force microscopy T2 - 18th Disc. Conf. and 56th PMM CY - Prague, Czech Republic DA - 1998-07-20 PY - 1998 AN - OPUS4-6451 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -