TY - CONF A1 - Rodricks, Carol T1 - Recyclable or One-Way Composites? Evaluating the Durability of Elium vs. Epoxy Glass Fibre Composites N2 - Fibre-reinforced polymers are widely used, particularly in lightweight construction, due to their high strength-to-weight ratio and versatility. The expansion of wind turbines calls for ever-lighter materials, and polymer matrix composites are well-positioned to meet this need, offering the necessary strength and long-term durability with reduced weight. However, conventional thermoset composites, such as epoxy-based systems, pose significant recycling challenges as they cannot be easily reprocessed or remoulded. A promising alternative is Elium, a novel thermoplastic resin that offers mechanical properties similar to thermoset polymers while providing the added benefit of chemical recyclability through solvolysis in acetone. This raises an important question: can a recyclable Elium composite match or even surpass the durability of a conventional epoxy composite, particularly in demanding structural applications? In our study, we compare the fatigue performance of Elium (191SA, 151-XO) glass fibre composites to conventional epoxy (RIMR 135, RIMH 137) glass fibre composites. Results indicate that Elium composites demonstrate superior fatigue resistance compared to their epoxy counterparts. The combination of enhanced fatigue durability and chemical recyclability highlights the potential of Elium composites as a sustainable alternative to conventional epoxy-based systems for long-term structural applications. T2 - Materials Week 2025 CY - Frankfurt am Main, Germany DA - 02.04.2025 KW - Polymer matrix composites KW - Recycling KW - Elium KW - Fatigue performance PY - 2025 AN - OPUS4-62936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Micro indentation near stiff-soft phase boundaries T2 - Polydays 2004 CY - Potsdam, Germany DA - 2004-10-04 PY - 2004 AN - OPUS4-4703 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Ermüdungsverhalten von faserverstärkten Thermoplasten T2 - Präsentationsveranstaltung des Berliner Verbands für Polymerforschung CY - Berlin, Germany DA - 1989-05-18 PY - 1989 AN - OPUS4-12094 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Bestimmung der Interface-Festigkeit in carbonfaserverstärkten Werkstoffen T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Kassel, Germany DA - 06.04.2005 PY - 2005 AN - OPUS4-6085 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Untersuchung der Phasenhaftung in Verbundwerkstoffen mit dem Faser-Eindrückversuch T2 - Wissensbörse - Präparationstechnik und Analytik CY - Berlin, Germany DA - 19.02.1998 PY - 1998 AN - OPUS4-12104 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Charakterisierung des Faser-Matrix-Interface mit dem Indentation-Test T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Bayreuth, Germany DA - 1995-10-24 PY - 1995 AN - OPUS4-12097 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Single Fiber Pull-out Test T2 - 4th International CFK-Valley Stade Convention CY - Stade, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-23289 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Charakterisierung des Interface-Versagens in Faserverbundwerkstoffen mit mikromechanischen Testmethoden T2 - 5. Berliner Polymeren-Tage CY - Potsdam, Germany DA - 1994-10-05 PY - 1994 AN - OPUS4-12096 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Monitoring the interface crack propagation with micromechanical test devices T2 - Interfacial Phenomena in Composite Materials CY - Berlin, Germany DA - 2001-01-28 PY - 2001 AN - OPUS4-12107 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Der Einfluss der Transkristallisation auf die scheinbare Scherfestigkeit von kohlefaserverstärktem Polyphenylensulid (PPS) mit der Einzelfaserauszugsmethode T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Bayreuth, Germany DA - 1995-10-24 PY - 1995 AN - OPUS4-12099 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Energy Quantification of Interface Debonding Processes Using 'Stiff' Test Devices T2 - Gordon Conference on Composite Materials CY - San Buenaventura, CA, USA DA - 2001-01-28 PY - 2001 AN - OPUS4-12108 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas T1 - An Advanced Indentation Technique for the Characterization of the Fibre-Matrix Interface T2 - Gordon Conference on Composites CY - San Buenaventura, CA, USA DA - 1997-01-05 PY - 1997 AN - OPUS4-12102 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Micro indentation near stiff-soft boundaries T2 - "Nanomech5, 5th European Symposium on nano-Mechanical Testing" CY - Hückelhoven, Germany DA - 2004-09-07 PY - 2004 AN - OPUS4-4704 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Energy based characterization of the fiber-matrix interface unsing the pull-out and the push-out test T2 - Micro Mat '97 CY - Berlin, Germany DA - 1997-04-16 PY - 1997 AN - OPUS4-12100 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Interfacial properties and their determination by using stiffness optimized test devices T2 - Workshop on Micro-Mechanics Measurement Technologies, NIST CY - Gaithersburg, MD, USA DA - 1997-05-28 PY - 1997 AN - OPUS4-12103 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Energy Dissipation of the Fibre-Matrix Debonding Process Investigated with the Indentation Technique T2 - Interfacial Phenomena of Composite Materials IPCM'95 CY - Eindhoven, Netherlands DA - 1995-09-11 PY - 1995 AN - OPUS4-12098 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Qian, H. T1 - Hierachical composites reinforced with carbon nanotube grafted fibres T2 - MC 8: ADVANCING MATERIALS BY CHEMICAL DESIGN CY - London, England DA - 2007-05-02 PY - 2007 AN - OPUS4-20121 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas T1 - An Advanced Equipment for Single-Fibre Pull-Out test designed to monitor the fracture process T2 - Interfacial Phenomena in Composite Materials CY - Cambridge, England DA - 1993-09-13 PY - 1993 AN - OPUS4-12095 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Energy based characterization of the fiber-matrix interface unsing the pull-out and the push-out test T2 - Interfacial Phenomena of Composite Materials IPCM'97 CY - Eger, Hungary DA - 1997-09-01 PY - 1997 AN - OPUS4-12101 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Testing the fibre-matrix adhesion in fiber reinforced polymers using the single fibre push-out method T2 - 8th European Conference on Applications of Surface and Interface Analysis (ECASIA 99) CY - Seville, Spain DA - 1999-10-04 PY - 1999 AN - OPUS4-12106 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Influence of water on the fibre-matrix adhesion investigated by the single fiber indentation method T2 - 4th European Conference on Adhesion, 1st World Congress on Adhesion an Related Phenomena CY - Garmisch-Partenkirchen, Germany DA - 1998-09-06 PY - 1998 AN - OPUS4-12105 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Houllé, Matthieu T1 - CNT-MODIFIED FABRICS FOR THE MANUFACTURING OF MULTI-FUNCTIONAL LAYERED COMPOSITES T2 - CESEP'11 4th International Conference on Carbons for Energy Storage/Conversion and Environment Protection CY - Vichy, France DA - 2011-09-25 PY - 2011 AN - OPUS4-24450 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Barnefske, Lena T1 - Self-healing silicone rubber for F-POF partial discharge sensors in HV cable accessories N2 - To avoid a catastrophic failure of insulation in high-voltage (HV) applications, a monitoring of partial discharges (PD) is necessary. Fluorescently labelled polymer optical fibres (F-POF) offer an electrically passive method for PD detection in HV facilities. F-POF could be embedded into HV cable insulation material, which are usually made of silicone rubber. Due to the difficult accessibility of HV cable accessories, a self-healing silicone rubber, based on incorporated capsules, with prolonged service life after PD detection represents an attractive material design for HV electrical insulation. T2 - 26th International Conference on Plastic Optical Fibres CY - Aveiro, Portugal DA - 13.09.2017 KW - Fluorescent polymer optical fibres KW - Partial discharge detection KW - High voltage cable accessories KW - Self-healing KW - Silicone rubber PY - 2017 AN - OPUS4-42511 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -