TY - CONF A1 - Kalinka, Gerhard T1 - Optische Beobachtungen der Faser-Matrix-Trennung im Pull-out-Versuch N2 - Der Vortrag behandelt Rissentstehung und Ausbreitung an Faser-Matrix-Interfaces, untersucht mit dem optischen Mikroskop. T2 - Composites United, CU-Arbeitsgruppe/n Faser-Matrix-Haftung & Matrices CY - Online meeting DA - 02.12.2021 KW - Faser KW - Matrix KW - Pull-out KW - Interface PY - 2021 AN - OPUS4-53968 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trappe, Volker A1 - Kalinka, Gerhard A1 - Loose, Florian T1 - Carbon fibre composites exemplarily research at BAM N2 - Lightweighting as a cross-cutting technology contributes significantly to achieve the European Green Deal goals. Based on, but not limited to, advanced materials and production technologies, the demand for natural resources and CO2 emmissions are reduced by lightweighting during production, as well as use phase. Therefore, lightweighting is a crucial transformation technology assisting in decoupling economic growth from resource consumption. In this manner, lightweighting contributes significantly as a key technology of relevance for many industrial sectors such as energy, mobility, and infrastructure, towards resource efficiency, climate action and economic strength, as well as a resilient Europe. To strengthen international partnerships, addressing global issues of today at the edge of science with high performance lightweight material based on carbon fibers, an overview about the BAM expertise in carbon fiber reinforced materials is given. T2 - Meeting KCarbon CY - Berlin, Germany DA - 15.06.2023 KW - Lightweighting KW - Carbon Fibers KW - Recycling KW - Push-out Test KW - multi scale testing PY - 2023 AN - OPUS4-58094 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Recycling von Faserverbundwerkstoffen N2 - Der Vortrag beschreibt Aktivitäten der BAM zum Recycling von carbonfaser-verstärkten Verbundwerkstoffen. T2 - Fachdialog Recycling von Windenergieanlagen CY - Berlin, Germany DA - 23.09.2024 KW - Polymer Matrix Composite KW - Carbon Fibres KW - Recycling KW - Pyrolysis KW - Recycling by Design PY - 2024 AN - OPUS4-61536 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Moderne Faserverbundwerkstoffe – Reparatur und Recycling N2 - Der Vortrag beschreibt Aktivitäten der BAM zur Reparatur von Rotorblättern von Windkraftanlagen sowie ein Konzept zum Recycling by Design für faserverstärkte Kunststoffe T2 - Reparaturgerechtes Produktdesign CY - Potsdam, Germany DA - 06.11.2024 KW - GFRP KW - Rotorblätter KW - Reparatur KW - Recycling KW - Composites PY - 2024 AN - OPUS4-61533 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Testing the fibre matrix interface of short glass fibre reinforced PMCs with using the push out technique N2 - With this presentation, the push-out technique is explained. The focus of the experimental work is on the characterization of the fiber-matrix interface of short fiber reinforced composites. The reinforcing component was glass fibers and the matrix polymer was PA6.6 and PPA. It is demonstrated for the first time that the push-out technique ca be applied on injection molded short fiber PMC and is sensitive to the mechanical interface properties. Further studies are planned on the influence of multiple processing, the temperature and humidity. T2 - Composirtes United Workshop „Fiber Matrix Interphases“ CY - Online meeting DA - 09.11.2023 KW - Polymer Matrix Composite KW - Glass Fibres KW - PA6.6 KW - PPA KW - Push-out Test KW - Interface Strength PY - 2023 AN - OPUS4-59053 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rodricks, Carol T1 - Recyclable or One-Way Composites? Evaluating the Durability of Elium vs. Epoxy Glass Fibre Composites N2 - Fibre-reinforced polymers are widely used, particularly in lightweight construction, due to their high strength-to-weight ratio and versatility. The expansion of wind turbines calls for ever-lighter materials, and polymer matrix composites are well-positioned to meet this need, offering the necessary strength and long-term durability with reduced weight. However, conventional thermoset composites, such as epoxy-based systems, pose significant recycling challenges as they cannot be easily reprocessed or remoulded. A promising alternative is Elium, a novel thermoplastic resin that offers mechanical properties similar to thermoset polymers while providing the added benefit of chemical recyclability through solvolysis in acetone. This raises an important question: can a recyclable Elium composite match or even surpass the durability of a conventional epoxy composite, particularly in demanding structural applications? In our study, we compare the fatigue performance of Elium (191SA, 151-XO) glass fibre composites to conventional epoxy (RIMR 135, RIMH 137) glass fibre composites. Results indicate that Elium composites demonstrate superior fatigue resistance compared to their epoxy counterparts. The combination of enhanced fatigue durability and chemical recyclability highlights the potential of Elium composites as a sustainable alternative to conventional epoxy-based systems for long-term structural applications. T2 - Materials Week 2025 CY - Frankfurt am Main, Germany DA - 02.04.2025 KW - Polymer matrix composites KW - Recycling KW - Elium KW - Fatigue performance PY - 2025 AN - OPUS4-62936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trappe, Volker T1 - Advanced lightweight applications – recycling versus reliability and fossil energy footprint N2 - Advanced light weight applications like aircrafts and wind turbine blades are made of fibre reinforced plastics (FRP) with continuous fibre reinforcement and must withstand a high thermo-mechanical cyclic loading. The quality of the fibre matrix interface has a high impact on the fatigue life and was continuously improved over the years since the 50th. The fatigue life of glass fibre reinforced plastics (GFRP) used in aircraft industry is 10 to 100 times higher compared to glass fibre non crimp fabrics used for wind turbine blades. To assure a constant and reliable high quality and strength of reinforcement fibres, synthetic fibre production is state of the art (CF, GF). There is a need for recycling GFRP and CFRP waste due to the upcoming use. Pyrolysis and solvolysis are more expensive than the mechanical route however enable a more sustainable recycling. Natural fibres and recycled synthetic fibres have a high scatter in quality and strength. Hence it is a challenge to optimize the production / recycling processes to get a reliable quality for any demanding (second life) application. Chemical routes for using renewables resources and recycling, is going to be a good approach especially for polymer-matrix systems to get 100% quality (back) compared to the state of the art. Finally, a proper design, life-time extension and repair is preferable to recycling to keep the carbon footprint as low as possible. T2 - 27. INTERNATIONALES DRESDNER LEICHTBAUSYMPOSIUM CY - Dresden, Germany DA - 13.06.2024 KW - Polymer Matrix Composites KW - Carbon Fibre KW - Recycling KW - Circular Economy PY - 2024 UR - https://leichtbausymposium.de/deu/ AN - OPUS4-60683 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rabe, Torsten T1 - Deformation behavior of alumina and zirconia springs at room temperature N2 - At high temperatures and in harsh environments ceramic springs are often superior to metallic springs and allow for innovative solutions. A recently proposed application involves ceramic springs with metallized surfaces as capacitive force sensor. A strictly linear stress-strain characteristic of the spring is a precondition for such a sensor. Helical ceramic springs with rectangular cross-section have been produced from sintered hollow cylinders. Alumina, ATZ, Y-TZP, and Ce-TZP springs with identical dimensions were characterized and compared regarding deformation behavior. Spring deformation was investigated under various load scenarios. Dynamic compression was performed with deformation speeds from 0.3 to 30 mm/min. Spring constants of alumina springs are strain rate independent. By contrast, Y-TZP spring constant increases by approximately 3 % within the experimental framework. A high-precision test facility was developed to characterize spring displacement in nm range under static tensile load over long periods of time. Spring elongation with asymptotic course was observed for zirconia containing materials at room temperature. This effect is particularly strong in the case of Y-TZP. Up to 0.3 % time-dependent elongation was measured after 24 h under constant load. Deformation is completely reversible after unloading. Alumina springs do not show any time-dependent deformation under identical test conditions. Contrary to alumina springs, a non-linear stress-strain behavior of TZP springs at room temperature was proved in both test series. It is supposed, that pseudo-elasticity caused by stress-induced phase transformation from tetragonal to monoclinic is responsible for this special behavior of TZP springs. T2 - D-A-CH Keramiktagung CY - Leoben, Austria DA - 06.05.2019 KW - Phase transformation KW - Ceramic spring KW - Force-distance diagram KW - Deformation behavior PY - 2019 AN - OPUS4-48026 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Micro indentation near stiff-soft phase boundaries T2 - Polydays 2004 CY - Potsdam, Germany DA - 2004-10-04 PY - 2004 AN - OPUS4-4703 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Testing the interface shear strength of carbon fibre reinforced composites T2 - Polydays 2006 CY - Berlin, Germany DA - 2006-10-04 PY - 2006 AN - OPUS4-13804 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Verbundwerkstoffe als Energiespeicher T2 - 4. Umwelt- und Technologietag, Fa. Brose CY - Coburg, Deutschland DA - 2014-09-25 PY - 2014 AN - OPUS4-32039 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Failure Processes in Fiber Reinforced Polymers T2 - Thermosets 2009 CY - Berlin, Germany DA - 2009-09-30 PY - 2009 AN - OPUS4-20057 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hinrichs, Volker T1 - Dynamische Einzelfaserbelastung T2 - Berliner Polymerentage CY - Berlin, Germany DA - 1997-10-09 PY - 1997 AN - OPUS4-12090 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Ermüdungsverhalten von faserverstärkten Thermoplasten T2 - Präsentationsveranstaltung des Berliner Verbands für Polymerforschung CY - Berlin, Germany DA - 1989-05-18 PY - 1989 AN - OPUS4-12094 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Bestimmung der Interface-Festigkeit in carbonfaserverstärkten Werkstoffen T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Kassel, Germany DA - 06.04.2005 PY - 2005 AN - OPUS4-6085 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Mikromechanik T2 - BAM, DGM Fachausschuss "Gefüge und Eigenschaften von Polymerwerkstoffen" CY - Berlin, Germany DA - 2003-12-05 PY - 2003 AN - OPUS4-4088 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Untersuchung der Phasenhaftung in Verbundwerkstoffen mit dem Faser-Eindrückversuch T2 - Wissensbörse - Präparationstechnik und Analytik CY - Berlin, Germany DA - 19.02.1998 PY - 1998 AN - OPUS4-12104 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Charakterisierung des Faser-Matrix-Interface mit dem Indentation-Test T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Bayreuth, Germany DA - 1995-10-24 PY - 1995 AN - OPUS4-12097 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Mikromechanische Methoden zur Messung der Faser-Matrix-Haftung in Polymermatrix-Verbundwerkstoffen T2 - Kolloquium des Fraunhofer IZM CY - Teltow, Germany DA - 2007-07-20 PY - 2007 AN - OPUS4-15858 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Local mechanical relaxation time spectroscopy with using the nano indentation technique T2 - THERMOSETS 2009 CY - Berlin, Germany DA - 2009-10-01 PY - 2009 AN - OPUS4-20123 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Bestimmung der Interface-Festigkeit oder -Trennarbeit mit dem Pull-out-Versuch T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Kassel, Germany DA - 2005-04-06 PY - 2005 AN - OPUS4-6084 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Charakterisierung des Faser-Matrix-Interface mit dem Indentation-Test T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Bayreuth, Germany DA - 1995-10-25 PY - 1995 AN - OPUS4-12008 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Computersimulation der lamellar-shpärolithischen Kristallisation bei Polymeren T2 - 5. Berliner Polymeren-Tage CY - Potsdam, Germany DA - 1994-10-05 PY - 1994 AN - OPUS4-12007 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Single Fiber Pull-out Test T2 - 4th International CFK-Valley Stade Convention CY - Stade, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-23289 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Charakterisierung des Interface-Versagens in Faserverbundwerkstoffen mit mikromechanischen Testmethoden T2 - 5. Berliner Polymeren-Tage CY - Potsdam, Germany DA - 1994-10-05 PY - 1994 AN - OPUS4-12096 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Sonderprüfverfahren für Verbundwerkstoffe T2 - Vortragsveranstaltung VDI-AK Kunststofftechnik, BV BB an der TU Berlin CY - Berlin, Deutschland DA - 2011-03-17 PY - 2011 AN - OPUS4-34456 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - mechanical properties of the fibre/matrix interface region of composite materials T2 - Eingeladener Vortrag Katholike Universitaet Leuven CY - Leuven, Belgium DA - 2010-07-01 PY - 2010 AN - OPUS4-23078 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas T1 - Bruchzähigkeit und Phasenhaftung von unidirektionalen PP/GF-Verbunden T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Kaiserslautern, Germany DA - 1997-09-17 PY - 1997 AN - OPUS4-12088 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Monitoring the interface crack propagation with micromechanical test devices T2 - Interfacial Phenomena in Composite Materials CY - Berlin, Germany DA - 2001-01-28 PY - 2001 AN - OPUS4-12107 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Charakterisierung des Interface-Versagens in Faserverbundwerkstoffen mit mikromechanischen Testmethoden T2 - 5. Berliner Polymeren Tage CY - Potsdam, Germany DA - 1994-10-05 PY - 1994 AN - OPUS4-5910 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalinka, Gerhard A1 - Hinrichsen, G. T1 - Two-dimensional computer simulation of spherulite formation by branching lamellae KW - Thermoplaste KW - Kristallisation KW - Sphärolithe KW - Lamellen KW - Modellrechnungen PY - 1997 SN - 0323-7648 SN - 1521-4044 VL - 48 SP - 256 EP - 261 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-12004 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Untersuchungs des Ermüdungsverhaltens glasfaserverstärkter Thermoplaste mittels Schwingungsmessungen T2 - Zweites Werkstoffsymposium Neue Verbundwerkstoffe CY - Regensburg, Germany DA - 1990-10-05 PY - 1990 AN - OPUS4-12127 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Bestimmung zeitabhängiger lokaler Eigenschaften von Polymeren mit der Nano-Indentationstechnik T2 - 15. Nationales SAMPE Symposium, BAM CY - Berlin, Germany DA - 2009-02-18 PY - 2009 AN - OPUS4-19013 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalinka, Gerhard A1 - Boro, I. A1 - Augustin, G. A1 - Hampe, Andreas A1 - Hinrichsen, G. T1 - Ermüdungsverhalten von Hochleistungs-Faserverbundwerkstoffen mit thermoplastischer Matrix KW - Verbundwerkstoffe KW - Ermüdung KW - Biegeschwingung KW - Thermoplaste KW - Glasfaser PY - 1990 SN - 0023-5563 VL - 80 IS - 5 SP - 626 EP - 630 PB - Hanser CY - München AN - OPUS4-11996 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Der Einfluss der Transkristallisation auf die scheinbare Scherfestigkeit von kohlefaserverstärktem Polyphenylensulid (PPS) mit der Einzelfaserauszugsmethode T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Bayreuth, Germany DA - 1995-10-24 PY - 1995 AN - OPUS4-12099 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Prüfung der Faser-Matrix-Wechselwirkung in Kompositen mittels Einzelfaser push- und pull-out Methoden T2 - 4. Wildauer Duromer-Tagung, TH Wildau CY - Wildau, Deutschland DA - 2014-03-03 PY - 2014 AN - OPUS4-32036 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Bestimmung der Haftfestigkeit in Verbundwerkstoffen mittels Indentations- und Durchdrückexperimenten T2 - DGM Fachausschuss "Gefüge und Eigenschaften von Polymerwerkstoffen" CY - Hamburg, Germany DA - 2004-11-26 PY - 2004 AN - OPUS4-4705 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas T1 - Mechanische Messungen der Bruchzähigkeit des Faser-Matrix-Grenzbereiches in polymeren Verbundwerkstoffen T2 - 35. Internationale Chemiefaser-Tagung CY - Dornbirn, Austria DA - 1996-09-25 PY - 1996 AN - OPUS4-5922 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Meretz, S. A1 - Hampe, Andreas T1 - Pull-out of Single Fibres KW - Verstärkungsfaser KW - Verbundwerkstoffe KW - Interface KW - Adhäsion KW - Reibung KW - Haftung KW - Thermoplast PY - 1994 SN - 0945-0084 VL - 84 IS - 5 SP - 25 EP - 26 PB - Hanser CY - München AN - OPUS4-11989 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Meretz, S. A1 - Hampe, Andreas T1 - Einzelfaserauszug - Eine Methode zum Bestimmen der Grenzflächenfestigkeit KW - Verstärkungsfaser KW - Verbundwerkstoffe KW - Interface KW - Adhäsion KW - Reibung KW - Haftung KW - Thermoplast PY - 1994 SN - 0023-5563 VL - 84 IS - 5 SP - 608 EP - 610 PB - Hanser CY - München AN - OPUS4-11994 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Energy Quantification of Interface Debonding Processes Using 'Stiff' Test Devices T2 - Gordon Conference on Composite Materials CY - San Buenaventura, CA, USA DA - 2001-01-28 PY - 2001 AN - OPUS4-12108 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas T1 - An Advanced Indentation Technique for the Characterization of the Fibre-Matrix Interface T2 - Gordon Conference on Composites CY - San Buenaventura, CA, USA DA - 1997-01-05 PY - 1997 AN - OPUS4-12102 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Carbonfaserverstärkte Polymere als Energiespeicher T2 - 47. Metallurgisches Seminar "Materialien für die Energieerzeugung, -nutzung und -speicherung" CY - Wernigerode, Deutschland DA - 2014-11-11 PY - 2014 AN - OPUS4-32041 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Local failure processes in fiber reinforced polymers T2 - International Conference on Composite Materials (ICCM17) CY - Edinburgh, Scotland DA - 2009-07-27 PY - 2009 AN - OPUS4-18372 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Micro indentation near stiff-soft boundaries T2 - "Nanomech5, 5th European Symposium on nano-Mechanical Testing" CY - Hückelhoven, Germany DA - 2004-09-07 PY - 2004 AN - OPUS4-4704 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Simulation von Kratzeinwirkungen am Beispiel bewitterter Polymerwerkstoffe T2 - 32. Jahrestagung der GUS (Gesellschaft für Umweltsimulation) CY - Pfinztal, Germany DA - 2003-03-26 PY - 2003 AN - OPUS4-4032 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hinrichsen, G. T1 - Computer simulation of spherulitic formation and crystallization in semicrystalline polymers T2 - Europhysics Conference on Macromolecular Physics CY - Prague, Czech Republic DA - 1995-07-17 PY - 1995 AN - OPUS4-12085 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Interface Faser-Matrix - welche Rolle spielt das Interface bei der Festigkeit von Faserverbundwerkstoffen T2 - 15. Nationales SAMPE Symposium, BAM CY - Berlin, Germany DA - 2009-02-18 PY - 2009 AN - OPUS4-19016 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Energy based characterization of the fiber-matrix interface unsing the pull-out and the push-out test T2 - Micro Mat '97 CY - Berlin, Germany DA - 1997-04-16 PY - 1997 AN - OPUS4-12100 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Mechanische Charakterisierung des Faser-Matrix-Interface mit Einzelfaser-Tests T2 - Werkstoffwoche 2004: Kongress für innovative Werkstoffe, Verfahren und Anwendungen CY - Munich, Germany DA - 2004-09-21 PY - 2004 AN - OPUS4-4701 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalinka, Gerhard A1 - Boro, I. A1 - Augustin, G. A1 - Hampe, Andreas A1 - Hinrichsen, G. T1 - Fatigue Behaviour of High-Performance Fibre-Reinforced Composites with a Thermoplastic Matrix KW - Verbundwerkstoffe KW - Ermüdung KW - Biegeschwingung KW - Thermoplaste KW - Glasfaser PY - 1990 SN - 0723-0192 VL - 80 IS - 5 SP - 36 EP - 38 PB - Hanser CY - Munich AN - OPUS4-11999 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Energy orientated data interpretation of pull-out and push-out test for the investigation of residual stresses T2 - Interface Phenomena in Composite Materials CY - Berlin, Germany DA - 1999-09-08 PY - 1999 AN - OPUS4-12093 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Interfacial properties and their determination by using stiffness optimized test devices T2 - Workshop on Micro-Mechanics Measurement Technologies, NIST CY - Gaithersburg, MD, USA DA - 1997-05-28 PY - 1997 AN - OPUS4-12103 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meretz, S. T1 - Kristallisationskinetik bei Faserverbundwerkstoffen T2 - Kolloquium der Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin, Germany DA - 1993-10-01 PY - 1993 AN - OPUS4-12128 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Einzelfaserausdrück und -durchdrückversuche T2 - Wissenschaftskolloquium "Nanotechnologie für Kunststoffverbunde", Haus der Wissenschaft, Veranstalter: Virtuelles Institut Nanotechnologie in Polymer Composites CY - Braunschweig, Deutschland DA - 2014-09-30 PY - 2014 AN - OPUS4-32040 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - A model of spherulitic crystallization based on growing lameallae T2 - 9th Microsymposium of Electron Microscopy in Materials Science CY - Lutherstadt Wittenberg, Germany DA - 2004-05-06 PY - 2004 AN - OPUS4-4702 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Micro indentation and scratch tests for surface characterisation T2 - XXII. Donauländergespräche über die natürliche und künstliche Alterung von Polymeren CY - Berlin, Germany DA - 2001-09-17 PY - 2001 AN - OPUS4-7506 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Energy Dissipation of the Fibre-Matrix Debonding Process Investigated with the Indentation Technique T2 - Interfacial Phenomena of Composite Materials IPCM'95 CY - Eindhoven, Netherlands DA - 1995-09-11 PY - 1995 AN - OPUS4-12098 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Untersuchung des Faser-Matrix-Interface in Verbundwerkstoffen mit Einzelfaserversuchen T2 - Technische Universität Clausthal, Institut für Polymerwerkstoffe und Kunststofftechnik - Eingeladener Vortrag CY - Clausthal-Zellerfeld, Germany DA - 2006-04-26 PY - 2006 AN - OPUS4-13803 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Qian, H. T1 - Hierachical composites reinforced with carbon nanotube grafted fibres T2 - MC 8: ADVANCING MATERIALS BY CHEMICAL DESIGN CY - London, England DA - 2007-05-02 PY - 2007 AN - OPUS4-20121 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas T1 - The Fracture Process in the Fibre/Matrix Interphase T2 - The Fifth International Conference on Composite Interfaces CY - Gothenburg, Sweden DA - 1994-07-20 PY - 1994 AN - OPUS4-5908 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hampe, Andreas A1 - Kalinka, Gerhard A1 - Meretz, S. A1 - Schulz, Eckhard T1 - An advanced equipment for single-fibre pull-out test designed to monitor the fracture process KW - Verbundwerkstoffe KW - Thermoplaste KW - Adhäsion KW - Reibung KW - Haftung KW - Interface KW - Schubfestigkeit KW - Scherfestigkeit KW - Messmethode PY - 1995 SN - 0010-4361 VL - 26 IS - 1 SP - 40 EP - 46 PB - Butterworth-Heinemann CY - Guildford, Surrey AN - OPUS4-11988 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Boro, I. T1 - Zur Wechselstromleitfähigkeit von elektrisch leitfähgen Polymeren T2 - Präsentationsveranstaltung des Berliner Verbandes für Polymerforschung e.V. CY - Berlin, Germany DA - 1989-03-25 PY - 1989 AN - OPUS4-12126 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas T1 - Energy based characterization of the fibre-matrix interface using the pull-out and push-in test T2 - Interfacial Phenomena in Composite Materials 97 CY - Eger, Hungary DA - 1997-03-01 PY - 1997 AN - OPUS4-12087 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Friction Measurement on fiber reinforced polymer composites with using the indentation technique T2 - European Conference on Composite Materials ECCM-8 CY - Naples, Italy DA - 1998-06-03 PY - 1998 AN - OPUS4-12089 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas T1 - An Advanced Equipment for Single-Fibre Pull-Out test designed to monitor the fracture process T2 - Interfacial Phenomena in Composite Materials CY - Cambridge, England DA - 1993-09-13 PY - 1993 AN - OPUS4-12095 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Mechanische Eigenschaften des Faser/Matrix Interfaces in Verbundwerkstoffen T2 - ILA 2010-Berlin Airshow, Konferenz: Composites in der Luft- und Raumfahrt CY - Berlin, Germany DA - 2010-06-08 PY - 2010 AN - OPUS4-21415 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas T1 - The Fracture Process in the Interphase Investigated by the Single Fiber Pull-out Test T2 - Composites Testing and Standardisation ECCM-CTS 2 CY - Hamburg, Germany DA - 1994-09-13 PY - 1994 AN - OPUS4-12009 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Energy based characterization of the fiber-matrix interface unsing the pull-out and the push-out test T2 - Interfacial Phenomena of Composite Materials IPCM'97 CY - Eger, Hungary DA - 1997-09-01 PY - 1997 AN - OPUS4-12101 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Shirshova, Natasha T1 - Modified epoxy resin as electrolytes for structural supercapacitors T2 - European Polymer Congress 2011 CY - Granada, Spain DA - 2011-06-26 PY - 2011 AN - OPUS4-24452 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bismarck, A. T1 - Multifunctional Epoxy Resin for Structural Supercapacitors T2 - European Conference on Composite Materials 15 CY - Venice, Italy DA - 2012-06-24 PY - 2012 AN - OPUS4-27466 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Was war die Schadensursache - was der Folgeschaden? T2 - polymertec 14 gemeinsam mit 14. Problemseminar "Deformation und Bruchverhalten von Kunststoffen", Hochschule Merseburg CY - Merseburg, Deutschland DA - 2014-06-25 PY - 2014 AN - OPUS4-32038 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas T1 - Measurement of the Interfacial Toughness in Composites by Micromechanical Experiments T2 - 4th Arab International Conference on Polymer Science & Technology CY - Cairo, Egypt DA - 1997-09-08 PY - 1997 AN - OPUS4-5929 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Characterization of the fibre-matrix interface with the indentation technique T2 - 6th International Conference on Composite Interfaces (ICCI-VI) CY - Zichron Ya'akov, Israel DA - 1996-05-05 PY - 1996 AN - OPUS4-12086 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Hierarchical Composites with Carbon Nanotube Grafted Fibres T2 - ECCM 13, 13th European Conference on Composite Materials CY - Stockholm, Sweden DA - 2011-06-02 PY - 2011 AN - OPUS4-24272 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Mechanical characterization of the fiber-matrix interface in brittle and ductile polymers by using pull-out and push-out tests T2 - COMPO2014 Nanocomposites&Biocomposites, Weizmann Institute of Science CY - Rehovot, Israel DA - 2014-04-28 PY - 2014 AN - OPUS4-32037 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Mikromechanische Testmethoden zur Bestimmung von Haftung und Reibung in Faserverbundwerkstoffen T2 - Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR), Institut für Strukturmechanik CY - Braunschweig, Germany DA - 2004-02-04 PY - 2004 AN - OPUS4-4700 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas T1 - The Single Fibre Pull-Out Test Performed with a Microcomposite Sample T2 - The Seventh International Conference on Composite Interfaces - ICCI-VII CY - Fujisawa, Kanagawa, Japan DA - 1998-05-10 PY - 1998 AN - OPUS4-5940 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hinrichsen, G. T1 - The Fiber/Matrix Interphase: New Insights into an old Problem T2 - INTERNATIONAL CONFERENCES ON POLYMER CHARACTERIZATION POLYCHAR-6 CY - Denton, TX, USA DA - 1998-01-07 PY - 1998 AN - OPUS4-12006 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hinrichs, V. A1 - Leistner, A. A1 - Kalinka, Gerhard A1 - Schulz, Eckhard A1 - Hinrichsen, G. T1 - Viscoelastic properties of the interphase in fibre reinforced polymers - measurement and simulation KW - Polymer KW - Glass fibre KW - Interphase KW - Coating KW - Glass transition KW - Dynamic KW - Viscoelastic PY - 1999 VL - 6 IS - 2 SP - 93 EP - 101 PB - North-Holland CY - New York, NY AN - OPUS4-12003 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Eckhard T1 - Effect of Transcrystallization in Carbon Fibre Reinforced Poly(p-phenylene sulfide) Composites on the Interfacial Shear Strength Investigated with the Single Fibre Pull-out Test T2 - Europhysics Conference on Macromolecular Physics CY - Prague, Czech Republic DA - 1995-07-17 PY - 1995 AN - OPUS4-12084 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Testing the fibre-matrix adhesion in fiber reinforced polymers using the single fibre push-out method T2 - 8th European Conference on Applications of Surface and Interface Analysis (ECASIA 99) CY - Seville, Spain DA - 1999-10-04 PY - 1999 AN - OPUS4-12106 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Microscopical failure processes in fiber reinforced polymers - Mechanical aspects of the adhesion between fiber and matrix T2 - 11th International Conference on Mechanics and Technology of Composite Materials CY - Sofia, Bulgaria DA - 2006-10-02 PY - 2006 AN - OPUS4-13239 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang T1 - Evaluation of the Adhesion Behaviour of Optical Fibers for Sensors Embedded in Cementitiuos Materials T2 - International Workshop on Fiber Optic Sensors for Construction Materials and Bridges CY - Newark, NJ, USA DA - 1998-05-03 PY - 1998 AN - OPUS4-12091 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Eckhard T1 - Investigation on mechanical behaviour of heterogeneous polymeric systems and fibre reinforced composites using micro indentation and scanning force microscopy T2 - 18th Disc. Conf. and 56th PMM CY - Prague, Czech Republic DA - 1998-07-20 PY - 1998 AN - OPUS4-6451 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Blaker, Jonny T1 - CARBON FIBRES WITH MODULATED PROPERTIES AND SHAPE ALONG THE FIBRE LENGTH T2 - 20th International Conference on Composite Materials - ICCM 20 CY - Copenhagen, Denmark DA - 2015-07-19 PY - 2015 AN - OPUS4-34454 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas T1 - Comparison of the Interfacial Toughness Measured by the Single Fibre Pull-Out, the Indentation and the Fragmentation Test T2 - NIST, Workshop on Micro-Mechanics Measurement Technologies for Fiber-Polymer Interfaces CY - Gaithersburg, MD, USA DA - 1997-05-28 PY - 1997 AN - OPUS4-5928 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Influence of water on the fibre-matrix adhesion investigated by the single fiber indentation method T2 - 4th European Conference on Adhesion, 1st World Congress on Adhesion an Related Phenomena CY - Garmisch-Partenkirchen, Germany DA - 1998-09-06 PY - 1998 AN - OPUS4-12105 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Comparison of Interfacial Properties obtained by using Single Filament Embedded Tensile Test and Push-in Test T2 - Recent Advancement of Interfacial Materials Science on Composite Materials '97 CY - Kyoto, Japan DA - 1997-05-07 PY - 1997 AN - OPUS4-12213 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Eckhard T1 - Investigation of polymeric composites reinforced with high oriented short glass fibres using the single fibre push-out test T2 - Euro-Conf. Surfaces and Interfaces in Polymers and Composites CY - Lausanne, Switzerland DA - 1997-06-03 PY - 1997 AN - OPUS4-6439 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wienrich, Malte T1 - IMPACT OF IONIC LIQUID ON THE MECHANICAL PERFORMANCE OF MATRIX POLYMER FOR FIBRE REINFORCED MATERIALS FOR ENERGY STORAGE T2 - ECCM 15 - European Conference on Composite Materials CY - Venice, Italy DA - 2012-06-24 PY - 2012 AN - OPUS4-27467 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Munz, Martin A1 - Chung, Jae Un A1 - Kalinka, Gerhard ED - Possart, W. T1 - Mapping Epoxy Interphases T2 - 7th European Conference on Adhesion ; 7th EURADH CY - Freiberg, Germany DA - 2004-09-01 KW - Interface KW - Interphase KW - Epoxy KW - Copper (Cu) KW - Polyvinylpyrrolidone (PVP) KW - AFM/SFM KW - DSI KW - EDX/EDS KW - Stiffness KW - Modulus KW - Interdiffusion PY - 2005 SN - 3-527-31263-3 VL - 7 SP - 103 EP - 123 PB - Wiley-VCH CY - Weinheim AN - OPUS4-10894 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Houllé, Matthieu T1 - CNT-MODIFIED FABRICS FOR THE MANUFACTURING OF MULTI-FUNCTIONAL LAYERED COMPOSITES T2 - CESEP'11 4th International Conference on Carbons for Energy Storage/Conversion and Environment Protection CY - Vichy, France DA - 2011-09-25 PY - 2011 AN - OPUS4-24450 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Eckhard T1 - Investigations of the mechanical behaviour of heterogeneous polymeric systems and fibre reinforced composites using micro indentation and scanning force microscopy T2 - Special Lectures, 18. Disc. Conf. And 56the PMM.: Mech. Behaviour of polymeric materials CY - Prague, Czech Republic DA - 1998-07-20 PY - 1998 AN - OPUS4-12092 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian A1 - Kalinka, Gerhard ED - Zachariev, G. T1 - Microscopical Failure Processes in Fiber Reinforced Polymers - Mechanical Aspects of the Adhesion between Fiber and Matrix T2 - 11th International Conference on Mechanics and Technology of Composite Materials CY - Sofia, Bulgaria DA - 2006-10-02 KW - Composite materials KW - Failure process KW - Adhesion PY - 2006 SP - 37 EP - 42 PB - Bulgarian Academy of Sciences CY - Sofia AN - OPUS4-14027 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin T1 - On the stiffness gradient at the interface between an amine-cured epoxy and a thermoplast T2 - 6. Workshop 'Rasterkraftmikroskopie in der Werkstoffwissenschaft' an der Uni Erlangen, Inst. für Werkstoffwissenschaften veranstaltet vom Arbeitskreis 'Rastersondenmikroskopie in der Werkstoffwissenschaft' im Fachausschuss Metallographie der Deutschen Gesellschaft für Materialkunde (DGM) CY - Erlangen, Germany DA - 2005-02-17 PY - 2005 AN - OPUS4-7137 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nowak, H. A1 - Kalinka, Gerhard A1 - Hinrichsen, G. T1 - Investigations on the cold crystallization of pure and filled PETP by dielectric measurements N2 - The cold crystallization of pure and filled poly(ethylene terephthalate) (PETP) after quenching from the melt has been investigated by dielectric measurements in two different modes: The first one using constant heating-rate (in the temperature range from 320 to 480 K) and the second one under isothermal conditions (at 378 K). The complex dielectric constant (ε´, tan δ) is influenced by crystallization. Two α-relaxation regions are identified: The αa-relaxation region from the pure amorphous phase and the α´-relaxation region from the spherulitic phase. The investigations on the filled systems (PETP + 10% aramid puple, PETP + 30% short glass fibres) prove that an influence of the fillers on the time delay and rate of crystallization and on the geometry of the growing spherulites exists. KW - Verbundwerkstoffe KW - Gefüllte Kunststoffe KW - Elektrische Eigenschaften KW - Verlustfaktor KW - Dielektrische Analyse PY - 1993 SN - 0323-7648 SN - 1521-4044 VL - 44 IS - 1 SP - 25 EP - 28 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-11995 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Kalinka, Gerhard T1 - Ein Beitrag zur Kristallisation gefüllter und ungefüllter Thermoplaste N2 - Hier wird der chronologische Verlauf der Kristallisation verfolgt. Sie beginnt mit den thermodynamischen Grundlagen der Keimbildung und des Wachstums, stellt anschließend Wachstumsformen in der Frühlphase der Kristallisation vor und behandelt schließlich die spärolithische Hauptkristallisation sowie die sogenannte Nachkristallisation. T3 - BAM Forschungsberichtreihe - 208 PY - 1995 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-2420 SN - 978-3-89429-557-0 SN - 0938-5533 VL - 208 SP - 1 EP - 64 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-242 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bismarck, A. A1 - Carreyette, S. A1 - Fontana, Q.P.V. A1 - Greenhalgh, E.S. A1 - Jacobsson, P. A1 - Johansson, P. A1 - Marczewski, M.J. A1 - Kalinka, Gerhard A1 - Kucernak, A. A1 - Shaffer, M.S. A1 - Shirshova, N. A1 - Steinke, J.H.G. A1 - Wienrich, Malte T1 - Multifunctional epoxy resin for structural supercapacitors N2 - Polymer-based electrolytes based on commercially available epoxy resins were prepared through the addition of a liquid electrolyte, a solution of a lithium salt in an ionic liquid. The polymer monoliths were characterized using impedance spectroscopy, 3-point bending test, scanning electron microscopy (SEM) and nitrogen adsorption (BET). The balance of ionic conductivity and flexural modulus is crucially dependent on the relative proportions of epoxy resin to electrolyte. Also the effect of the liquid electrolyte on curing kinetics and processing was assessed by complex viscosity measurements and differential scanning calorimetry (DSC). Only one out of the three resins investigated exhibited a significant acceleration effect. T2 - ECCM15 - 15th European conference on composite materials CY - Venice, Italy DA - 2012-06-24 KW - Multifunctional epoxy KW - Polymer electrolyte KW - Morphology KW - Ionic liquid PY - 2012 SN - 978-88-88785-33-2 SP - 1 EP - 8(?) AN - OPUS4-28694 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Elabshihy, Karim T1 - Investigation of the time-dependent behavior of cnt-filled epoxy using nanoindentation N2 - Epoxy/Carbon nanotube (CNT) composites are interesting materials that could be used in a wide variety of applications. In this study, CNT contents of 0.25, 0.5, 1 and 2 wt% were used for reinforcing epoxy. A nanoindentation device and a temperature regulating system were developed in order to investigate the effect of CNTs on the time-dependent properties of epoxy using relaxations and creep tests on the nano scale. The relaxation tests showed a significant shift for the relaxation spectrum towards shorter times with introducing a low CNT content of 0.25 wt%. Additionally, creep tests showed that both the holding time at a constant load and the unloading velocity have a major effect on the contact stiffness. However, there was no effect for the CNTs on the creep behavior with contents lower than 1 wt%, which was related to the presence of a percolation threshold around this value. T2 - Nanobrücken 2013 CY - Dresden, Germany DA - 20.03.2013 KW - Epoxy KW - CNT KW - Time-dependent KW - Nanoindentation PY - 2013 AN - OPUS4-35533 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -