TY - CONF A1 - Kalinka, Gerhard T1 - A model of spherulitic crystallization based on growing lameallae T2 - 9th Microsymposium of Electron Microscopy in Materials Science T2 - 9th Microsymposium of Electron Microscopy in Materials Science CY - Lutherstadt Wittenberg, Germany DA - 2004-05-06 PY - 2004 AN - OPUS4-4702 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bertin, Annabelle A1 - Czarnecki, Sebastian A1 - Hackelbusch, Sebastian T1 - Bioinspired hybrid organic-inorganic copolymers N2 - The demand for high-performance materials has strongly increased over the last decade. One way to improve their performance is to introduce material gradients as found in Nature (for example squid beaks, spider fangs, mussel byssal threads). One path towards the achievement of such material gradients is the synthesis of hybrid (gradient) copolymers, for instance based on silane and organic monomers. Since not all gradient copolymers can be synthesized by utilising the reactivity ratios of the monomers, forced gradients have to be used. However, in order to obtain gradient copolymers at high conversions, living or pseudo-living copolymerizations have to be performed and so far only few hybrid (organic / inorganic) gradient copolymers have been reported. In this contribution we will present the synthesis of a novel organic / inorganic hybrid copolymer via controlled radical polymerization. T2 - 5th International Conference on Multifunctional, Hybrid and Nanomaterials CY - Lisbon, Portugal DA - 06.03.2017 KW - Hybrid organic-inorganic copolymers KW - RAFT polymerization KW - ATRP polymerization PY - 2017 AN - OPUS4-39464 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bertin, Annabelle T1 - Building macromolecular mimetics of cell constituents N2 - One of the holy grails in chemistry is to reconstruct some of life’s functions with synthetic materials. In this contribution, we demonstrate that “simple” macromolecular architectures such as dendritic amphiphiles, Janus dendrimers, thermoresponsive and hybrid organic-inorganic (co)polymers enable to mimic some of the functions of proteins for biomineralization, natural bactericides, biological membranes or the stimuli-responsive cytoskeleton. T2 - Makromolekulares Kolloquium Freiburg 2018 CY - Freiburg in Breisgau, Germany DA - 21.02.2018 KW - Thermoresponsive polymers KW - Cytoskeleton mimic PY - 2018 AN - OPUS4-44296 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bertin, Annabelle T1 - Building macromolecular mimetics of cell constituents N2 - One of the holy grails in chemistry is to reconstitute some of life’s functions with or within synthetic materials. In this contribution, we demonstrate that “simple” macromolecular architectures such as dendritic amphiphiles, Janus dendrimers, thermoresponsive and hybrid organic-inorganic (co)polymers enable to mimic some of the functions of proteins for biomineralization, natural bactericides, biological membranes or the stimuli-responsive cytoskeleton. T2 - Chemiedozententagung 2018 CY - Jena, Germany DA - 05.03.2018 KW - UCST-type polymers KW - Bioinspiration KW - Thermoresponsive polymers PY - 2018 AN - OPUS4-44442 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trappe, Volker A1 - Kalinka, Gerhard A1 - Loose, Florian T1 - Carbon fibre composites exemplarily research at BAM N2 - Lightweighting as a cross-cutting technology contributes significantly to achieve the European Green Deal goals. Based on, but not limited to, advanced materials and production technologies, the demand for natural resources and CO2 emmissions are reduced by lightweighting during production, as well as use phase. Therefore, lightweighting is a crucial transformation technology assisting in decoupling economic growth from resource consumption. In this manner, lightweighting contributes significantly as a key technology of relevance for many industrial sectors such as energy, mobility, and infrastructure, towards resource efficiency, climate action and economic strength, as well as a resilient Europe. To strengthen international partnerships, addressing global issues of today at the edge of science with high performance lightweight material based on carbon fibers, an overview about the BAM expertise in carbon fiber reinforced materials is given. T2 - Meeting KCarbon CY - Berlin, Germany DA - 15.06.2023 KW - Lightweighting KW - Carbon Fibers KW - Recycling KW - Push-out Test KW - multi scale testing PY - 2023 AN - OPUS4-58094 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Leistner, André A1 - Hampe, Andreas T1 - Characterization of the fibre-matrix interface with the indentation technique T2 - 6th International Conference on Composite Interfaces (ICCI-VI) T2 - 6th International Conference on Composite Interfaces (ICCI-VI) CY - Zichron Ya'akov, Israel DA - 1996-05-05 PY - 1996 AN - OPUS4-12086 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Hana, K. A1 - Fujihara, I. A1 - Hayasaki, S. A1 - Hamada, H. T1 - Comparison of Interfacial Properties obtained by using Single Filament Embedded Tensile Test and Push-in Test T2 - Recent Advancement of Interfacial Materials Science on Composite Materials '97 T2 - Recent Advancement of Interfacial Materials Science on Composite Materials '97 CY - Kyoto, Japan DA - 1997-05-07 PY - 1997 AN - OPUS4-12213 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Kalinka, Gerhard A1 - Marotzke, Christian T1 - Comparison of the Interfacial Toughness Measured by the Single Fibre Pull-Out, the Indentation and the Fragmentation Test T2 - NIST, Workshop on Micro-Mechanics Measurement Technologies for Fiber-Polymer Interfaces T2 - NIST, Workshop on Micro-Mechanics Measurement Technologies for Fiber-Polymer Interfaces CY - Gaithersburg, MD, USA DA - 1997-05-28 PY - 1997 AN - OPUS4-5928 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hinrichsen, G. A1 - Kalinka, Gerhard A1 - Marotzke, Christian T1 - Computer simulation of spherulitic formation and crystallization in semicrystalline polymers T2 - Europhysics Conference on Macromolecular Physics T2 - Europhysics Conference on Macromolecular Physics CY - Prague, Czech Republic DA - 1995-07-17 PY - 1995 AN - OPUS4-12085 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bertin, Annabelle A1 - Taabache, Soraya A1 - Maskos, M. T1 - Controlled Self-Assembly of Janus Dendrimers via Microfluidics N2 - Unilamellar vesicles self-assembled in water from natural and synthetic phospholipids (liposomes), amphiphilic block copolymers (polymersomes), and more recently amphiphilic Janus dendrimers (dendrimersomes) as hollow soft structures in the nano size regime have attracted increasing interest as they can mimic primitive and contemporary biological membranes, and can be configured into biomimetic nanocapsules with application in nanomedicine such as gene, proteins and drug carriers or theranostics. Compared to other amphiphilic structures, the molecular structure of Janus dendrimers can be precisely controlled: by using the vast range of tools from organic chemistry their size, architecture, density, generation as well as the number of endgroups of the individual dendrons can be modified as desired. Unfortunately, the controlled production of the supramolecular aggregates made thereof is still a challenging task. Conventional batch-based techniques such as the solvent injection method or the film hydration method typically go along with a lack of control over mixing and thus over size, morphology and size distribution. The micromixer technology is a promising method for the controlled preparation of supramolecular assemblies as it allows control of mixing at microscale level. In addition, such microfluidic systems benefit from a high mixing efficiency, a low mixing time as well as from a reproducible and continuous synthesis. Herein, we report on the microfluidic-controlled self-assembly of Janus dendrimers as dendrimersomes and the impact of the mixing parameters on the self-assembly process. T2 - 10th International Dendrimer Symposium CY - Weihai, China DA - 05.08.2017 KW - Micromixers KW - Janus dendrimers KW - Vesicles KW - Self-assembly PY - 2017 AN - OPUS4-41464 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -