TY - CONF A1 - Schaupp, Thomas A1 - Burger, S. A1 - Kannengießer, Thomas A1 - Zinke, M. A1 - Jüttner, S. T1 - Berichterstattung zum laufenden Projekt: „Ermittlung geeigneter Wärmeführungen zur Wasserstoffreduktion beim Schweißen höherfester Feinkornbaustähle mit modifiziertem Sprühlichtbogen“ N2 - Dieses Dokument fasst den Projekfortschritt des BAM-Projektes "Ermittlung geeigneter Wärmeführungen zur Wasserstoffreduktion beim Schweißen höherfester Feinkornbaustähle mit modifiziertem Sprühlichtbogen" im Rahmen des Fachausschusses 1 "Schweißmetallurgie & Werkstoffverhalten" des DVS e. V. zusammen. T2 - Sitzung des Fachausschusses 01 "Schweißmetallurgie & Werkstoffverhalten" der Forschungsvereinigung Schweißen und verwandte Verfahren des DVS e. V. CY - Düsseldorf, Germany DA - 17.03.2016 KW - Hochfester Feinkornbaustahl KW - Wasserstoff KW - MAG-Schweißen PY - 2016 AN - OPUS4-53670 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schaupp, Thomas A1 - Burger, S. A1 - Kannengießer, Thomas A1 - Zinke, M. A1 - Jüttner, S. T1 - Berichterstattung zum laufenden Projekt: „Ermittlung geeigneter Wärmeführungen zur Wasserstoffreduktion beim Schweißen höherfester Feinkornbaustähle mit modifiziertem Sprühlichtbogen“ N2 - Dieses Dokument fasst den Projekfortschritt des BAM-Projektes "Ermittlung geeigneter Wärmeführungen zur Wasserstoffreduktion beim Schweißen höherfester Feinkornbaustähle mit modifiziertem Sprühlichtbogen" im Rahmen des Fachausschusses 1 "Schweißmetallurgie & Werkstoffverhalten" des DVS e. V. zusammen. T2 - Sitzung des Fachausschusses 01 "Schweißmetallurgie & Werkstoffverhalten" der Forschungsvereinigung Schweißen und verwandte Verfahren des DVS e. V. CY - Düsseldorf, Germany DA - 08.09.2016 KW - Hochfester Feinkornbaustahl KW - Wasserstoff KW - MAG-Schweißen PY - 2016 AN - OPUS4-53671 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Bertovic, Marija T1 - Human Factors in Non-Destructive Testing (NDT): Risks and Challenges of Mechanised NDT T1 - Human Factors bei der zerstörungsfreien Prüfung (ZfP): Risiken und Herausforderungen mechanisierter ZfP N2 - Non-destructive testing (NDT) is regarded as one of the key elements in ensuring quality of engineering systems and their safe use. A failure of NDT to detect critical defects in safetyrelevant components, such as those in the nuclear industry, may lead to catastrophic consequences for the environment and the people. Therefore, ensuring that NDT methods are capable of detecting all critical defects, i.e. that they are reliable, is of utmost importance. Reliability of NDT is affected by human factors, which have thus far received the least amount of attention in the reliability assessments. With increased use of automation, in terms of mechanised testing (automation-assisted inspection and the corresponding evaluation of data), higher reliability standards are believed to have been achieved. However, human inspectors, and thus human factors, still play an important role throughout this process, and the risks involved in this application are unknown. The overall aim of the work presented in this dissertation was to explore for the first time the risks associated with mechanised NDT and find ways of mitigating their effects on the inspection performance. Hence, the objectives were to (1) identify and analyse potential risks in mechanised NDT, (2) devise measures against them, (3) critically address the preventive measures with respect to new potential risks, and (4) suggest ways for the implementation of the preventive measures. To address the first two objectives a risk assessment in form of a Failure Modes and Effects Analysis (FMEA) was conducted (Study 1). This analysis revealed potential for failure during both the acquisition and evaluation of NDT data that could be assigned to human, technology, and organisation. Since the existing preventive measures are insufficient to defend the system from identified failures, new preventive measures were suggested. The conclusion of the study was that those preventive measures need to be carefully considered with respect to new potential risks, before they can be implemented, thus serving as a starting point for further empirical studies. To address the final two objectives, two preventive measures, i.e. human redundancy and the use of automated aids in the evaluation of NDT data, were critically assessed with regard to potential downfalls arising from the social interaction between redundant individuals and the belief in the high reliability of automated aids. The second study was concerned with the potential withdrawal of effort in sequential redundant teams when working collectively as opposed to working alone, when independence between the two redundant individuals is not present. The results revealed that the first redundant inspector, led to believe someone else will conduct the same task afterwards, invested the same amount of effort as when working alone. The redundant checker was not affected by the information about the superior experience of his predecessor and—instead of expected withdrawal of effort—exhibited better performance in the task. Both results were in contradiction to the hypotheses, the explanations for which can be found in the social loafing and social compensation effects and in the methodological limitations. The third study examined inappropriate use of the aid measured in terms of (a) agreement with the errors of the aid in connection to the frequency of verifying its results and in terms of (b) the overall performance in the task. The results showed that the information about the high reliability of the aid did not affect the perception of that aid’s performance and, hence, no differences in the actual use of the aid were to be expected. However, the participants did not use the aid appropriately: They misused it, i.e. agreed with the errors committed by the aid and disused it, i.e. disagreed with the correct information provided by the aid, thereby reducing the overall reliability of the aid in terms of sizing ability. Whereas aid’s misuse could be assigned to low propensity to take risks and reduced verification behaviour because of a bias towards automation, the disuse was assigned to the possible misunderstanding of the task. The results of these studies raised the awareness that methods used to increase reliability and safety, such as automation and human redundancy, can backfire if their implementation is not carefully considered with respect to new potential risks arising from the interaction between individuals and complex systems. In an attempt to minimise this risk, suggestions for their implementation in the NDT practice were provided. N2 - Die zerstörungsfreie Prüfung (ZfP) wird als eines der wichtigsten Qualitätssicherungsmaßnahmen für technische Systeme und deren sichere Anwendung betrachtet. Wenn die ZfP kritische Defekte in sicherheitsrelevanten Anlagen, wie z.B. in der Kerntechnik, nicht entdeckt, kann dies zu katastrophalen Folgen für die Umwelt und den Menschen führen. Deshalb muss gewährleistet sein, dass die Verfahren der ZfP zuverlässig sind, d.h. dass sie alle kritischen Defekte entdecken können. Die Zuverlässigkeit der ZfP wird von menschlichen Faktoren beeinflusst, die jedoch bisher in diesem Feld selten betrachtet wurden. Durch den verstärkten Einsatz von Automatisierung beispielsweise bei der mechanisierten Prüfung (automatisierungsunterstütze Prüfung und die zugehörige Datenbewertung) wurde die Erreichung eines höheren Zuverlässigkeitsniveaus erwartet. Menschliche Faktoren sind trotz der Automatisierung immer noch bedeutsam für den gesamten Prüfprozess. Die Risiken der stärkeren Automatisierung der Prüfungen sind nicht vollständig bekannt. Das generelle Anliegen dieser Arbeit ist die erstmalige Feststellung der Risiken der mechanisierten ZfP und das Aufzeigen von Möglichkeiten, diese zu verringern. Die konkreten Ziele dieser Arbeit sind dementsprechend (1) die potenziellen Risiken bei der mechanisierten Prüfung aufzuzeigen und zu analysieren, (2) präventive Maßnahmen für diese Risiken abzuleiten, (3) diese präventiven Maßnahmen kritisch hinsichtlich neuer Risiken zu beleuchten sowie (4) Umsetzungsvorschläge aufzuzeigen. Für die ersten zwei Ziele wurde eine Risikoabschätzung mit der Fehlzustandsart- und auswirkungsanalyse (FMEA) durchgeführt (Studie 1). Diese Analyse ergab Fehlermöglichkeiten während der Datenaufnahme und –bewertung bei der mechanisierten ZfP, die dem Menschen, der Technik und der Organisation zugeordnet werden können. Weil die vorhandenen präventiven Maßnahmen unzureichend für die Vermeidung der identifizierten Fehler waren, wurden neue präventive Maßnahmen vorgeschlagen. Die Schlussfolgerung der Studie zeigt, dass vor der Umsetzung präventiver Maßnahmen eine sorgfältige Betrachtung hinsichtlich neuer potenzieller Risiken erfolgen muss. Dies war der Ausgangspunkt für die weiteren empirischen Untersuchungen. Für die letzten beiden Ziele wurden zwei präventive Maßnahmen untersucht: die menschliche Redundanz und die Anwendung automatisierter Assistenzsysteme bei der ZfP-Datenbewertung. Im Fokus lagen potenzielle Schwachstellen, die aus sozialer Interaktion der redundanten Individuen und aus dem Vertrauen in die hohe Zuverlässigkeit der automatisierten Assistenzsysteme entstehen können. In der zweiten Studie wurde die potenzielle Reduzierung der Anstrengung in sequentiellen redundanten Teams untersucht, indem die gemeinsame Aufgabenbearbeitung in Teams der individuellen Aufgabenbearbeitung gegenüber gestellt wurde. Die Ergebnisse zeigten, dass der erste redundante Prüfer, dem mitgeteilt wurde, dass ein anderer Prüfer die Prüfaufgabe nach ihm durchführen wird, die gleiche Anstrengung investierte wie der individuelle Bearbeiter. Der zweite redundante Prüfer (redundant checker) wurde durch die Information, dass sein Vorprüfer die höherwertige Erfahrung besitzt, nicht hypothesenkonform beeinflusst - anstelle der erwarteten Rücknahme der Anstrengung - zeigte er eine bessere Leistung bei der Durchführung der Aufgabe. Beide Ergebnisse stehen in Widerspruch zu den Hypothesen und können durch social loafing und social compensation Effekte sowie durch methodische Aspekte erklärt werden. In der dritten Studie wurde die unangemessene Nutzung eines automatisierten Assistenzsystems untersucht operationalisiert als (a) die Übereinstimmung mit Fehlern des Systems verbunden mit der Überprüfungshäufigkeit seiner Ergebnisse und (b) die Leistung bei der Aufgabe. Die Ergebnisse zeigten, dass die Information über die hohe Zuverlässigkeit des Systems die Wahrnehmung der Systemleistung nicht beeinflusste und folglich keine Unterschiede in der tatsächlichen Nutzung des Systems zu finden waren. Die Probanden nutzten jedoch das System nicht angemessen: sie stimmten den Fehlern des Systems zu (automation misuse) und sie lehnten korrekte Informationen des Systems ab (automation disuse). So reduzierten sie die Gesamtzuverlässigkeit des Systems, zumeist bei der Fehlergrößenbestimmung. Während misuse mit einer niedrigen Risikobereitschaft und eingeschränkten Überprüfungsverhalten auf Grund des automation bias erklärt werden kann, wird disuse dem möglichen Missverstehen der Aufgabe zugeordnet. Die Ergebnisse dieser Studien haben das Bewusstsein dafür erhöht, dass Methoden zur Erhöhung der Zuverlässigkeit und Sicherheit sowie Automatisierung und menschliche Redundanz versagen können, wenn die potenziellen Risiken ihrer Umsetzung aufgrund der Interaktion zwischen Mensch und Technik nicht bedacht werden. Um diese Risiken bei der Anwendung präventiver Maßnahmen zu minimieren, wurden Vorschläge für die ZfP-Praxis erarbeitet. T3 - BAM Dissertationsreihe - 145 KW - Failure modes and effects analysis KW - Zuverlässigkeit KW - Menschliche Faktoren KW - Zerstörungsfreie Prüfung KW - Fehlzustandsart- und auswirkungsanalyse KW - Personelle Redundanz KW - Human factors KW - Non-destructive testing KW - Human redundancy KW - Automation bias KW - Reliability PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:83-opus4-71292 SN - 978-3-9817502-7-0 DO - https://doi.org/10.14279/depositonce-4685 SN - 1613-4249 VL - 145 SP - 1 EP - 161 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-36090 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hutchinson, R. A1 - Wilkins, J. A1 - Summerfield, L. A1 - O’Connor, C. A1 - McLachlin, K. A1 - Jakubowski, Norbert A1 - Traub, Heike A1 - Esteban-Fernández, Diego T1 - Performance and data from an elemental microscope - The NWR image N2 - The NWRimage system is the first elemental imaging-specific laser ablation instrument, offering breakthrough sub-micron spatial resolution and ultra-fast signal response for high throughput rates. Laser ablation (LA) systems are used in conjunction with Inductively Coupled Plasma Mass Spectrometry (ICP-MS) systems to detect and analyze tiny amounts of material. As ICP-MS systems have become more sensitive, a need has emerged for LA imaging tools with < 1 micron spatial resolution - a capability not previously available on the market. The NWRimage is provided with a carefully designed aerosol path from point of ablation to injection into the ICP itself. This aerosol path combined with a novel Dual Concentric Injector (DCI) ICP torch, yields < 50ms signal response to accelerate the speed of analysis and enabling enhanced sample throughput. The LA system is used for bio imaging of single cells and medical tissue samples. T2 - Winter Conference on Plasma Spectrochemistry 2016 CY - Tucson, Arizona, USA DA - 11.01.2016 KW - Laser ablation KW - Bio imaging PY - 2016 AN - OPUS4-36513 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaunich, Matthias A1 - Wolff, Dietmar T1 - Use of rubber seals at low temperatures N2 - Rubber is widely used as sealing material in various applications. In many fields the function of seal materials at low temperatures is necessary. Therefore, the understanding of failure mechanisms that lead to leakage at low temperatures is of high importance. It is known that the material properties of rubbers are strongly temperature dependent. At low temperatures this is caused by the rubber-glass transition (abbr. glass transition). During continuous cooling, due to the glass transition the material changes from rubber-like entropy-elastic behaviour to stiff energy-elastic behaviour, that allows nearly no strain or retraction. Hence, rubbers are normally used above their glass transition. But as the minimum working temperature limit of elastomers cannot be defined globally and precisely, the lower operation temperature limit of rubber seals should be determined in dependence of the application conditions and the most relevant material properties. In this paper, wesummarize results of our temperature dependent investigation of seal material properties by classical thermal analysis as Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA), combined with measurements of standardized tests as compression set and the seal performance determined in component tests. To reduce the test time of compression set tests a faster technique was developed and applied. To study the influence of dynamic events on the seal performance and to enhance the understanding of occurring seal failure, a setup for a fast partial seal release was designed. T2 - RubberCon 2016 CY - Tampere, Finland DA - 08.06.2016 KW - O-Ring KW - Compression set KW - Leakage rate KW - Low temperature PY - 2016 AN - OPUS4-36514 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rhode, Michael A1 - Steppan, Enrico A1 - Kannengießer, Thomas A1 - Steger, Jörg ED - Lippold, J. T1 - Effect of hydrogen on mechanical properties of heat affected zone of a reactor pressure vessel steel grade N2 - The steel grade 20MnMoNi5-5 (according to German DIN standard or 16MND5 according to French AFNOR standard) is widely applied in (weld) fabrication of reactor pressure vessel components. Thus, a wide range of welding technologies (like submerged arc welding (SAW) or tungsten inert gas (TIG)) is used resulting in different heat affected zone (HAZ) microstructures. During weld fabrication, the weld joints may take up hydrogen. Especially, the HAZ shows an increased susceptibility for a degradation of the mechanical properties in presence of hydrogen. In addition, the hydrogen-assisted degradation of mechanical properties is influenced by three main local factors: hydrogen concentration, microstructure, and load condition. Hence, the base material (BM) and two different simulated non-tempered as-quenched HAZ microstructures were examined using hydrogen-free and hydrogen-charged tensile specimens. The results indicate that the effect of hydrogen on the degradation is significantly increased in case of the HAZ compared to the BM. In addition, hydrogen has remarkable effect in terms of reduction of ductility. It was ascertained that the degradation of the mechanical properties increases in the order of BM, bainitic HAZ, and the martensitic HAZ. Scanning electron microscope (SEM) investigation showed a distinct change of the fracture topography depended on the microstructure with increasing hydrogen concentration in case of the as-quenched HAZ microstructures. KW - Mechanical properties KW - Pressure vessel steels KW - Heat affected zone KW - Hydrogen KW - Hydrogen embrittlement KW - Low alloy steels PY - 2016 UR - http://link.springer.com/article/10.1007/s40194-016-0325-9 DO - https://doi.org/10.1007/s40194-016-0325-9 VL - 60 IS - 4 SP - 623 EP - 638 PB - Springer-Verlag GmbH CY - Heidelberg, Germany AN - OPUS4-36454 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Häßler, Dustin A1 - Hothan, Sascha ED - Moreyra Garlock, Maria E. ED - Kodur, Venkatesh K.R. T1 - Fire tests of reactive fire protections systems applied to steel tension members with solid circular section N2 - In civil engineering, steel tension members are normally used for bracings, suspensions and underbracing systems. Typically, slim circular solid sections (CSS) are used for such tension members. However, sufficient knowledge about the performance of reactive fire protection systems (RFPS) applied to solid steel tension members has so far been missing. The application of RFPS on such members was not covered by national German approvals (abZ) as well as European technical assessments (ETA) and therefore only possible by approvals in individual case by the building authority. This paper describes the world’s first scientifically investigated fire tests of RFPS applied to steel tension members with CSS. The influence of various parameters such as profile geometry, dry film thickness of the RFPS, level of the load utilization as well as member orientation was tested. In addition, the foaming and cracking behaviour and thermal protection of the RFPS used are investigated and failure mechanisms are identified. To measure the steel temperature of the tension member without weakening the cross-section a special method for the application of thermocouples was developed. The fire tests show that an application of RFPS on steel tension members with solid section is generally possible. However, due to the slim cross-sections and the missing possibility of load distribution within the tension member, high requirements are placed particularly on the effectiveness and reliability of the RFPS. In particular, the testing of mechanically loaded tension members is essential, since the necessary three-dimensional foaming results in the highest stress level for the RFPS. The findings obtained from the performed fire tests are of general nature. Recommendations for the testing and assessment of RFPS applied to steel tension members with solid section are briefly described in this paper and explained in detail in [1] and [2]. Based on this research, the German building authority (DIBt) has defined national approval guidelines for the testing and the assessment of RFPS applied to tension members with solid section. Since November 2015, a general building approval for a RFPS is available in Germany. T2 - 9th International Conference on Structures in Fire CY - Princeton, NJ, USA DA - 08.06.2016 KW - Steel Structure KW - Intumescent Coating KW - Reactive Fire Protection system KW - Fire Tests KW - Tension Member PY - 2016 SN - 978-1-60595-320-5 VL - 9 SP - 1099 EP - 1106 PB - DEStech Publications, Inc. CY - Lancaster, CA, USA AN - OPUS4-36455 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Häßler, Dustin A1 - Hothan, Sascha T1 - Fire tests of reactive fire protection systems applied to steel tension members with solid circular section N2 - Steel tension members with reactive fire protection system have to be tested under mechanical loading. T2 - 9th International Conference on Structures in Fire CY - Princeton, NJ, USA DA - 08.06.2016 KW - Steel members KW - Intumescent coating KW - Reactive fire protection system KW - Tension member KW - Fire tests PY - 2016 AN - OPUS4-36456 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Raedel, Martina A1 - Feldmann, Ines A1 - Bücker, Michael A1 - Kömmling, Anja ED - Roemich, Hannelore ED - Fair, Lauren T1 - Testing bulked adhesives for the Restoration of Stained-Glass Windows N2 - In this study, bulked adhesives were examined regarding changes in properties for their use in the restoration of stained-glass windows. Two epoxy adhesives commonly used in the restoration of flat glass, Araldite® 2020 and Hxtal NYL-1™, were investigated. The adhesives were mixed with various silica-based micro- and nano-particles as fillers. Different tests were carried out on the adhesives with and without fillers in order to characterise their chemical and mechanical properties. The tests included colorimetry, dynamic-mechanical methods of analysis and tests on bending strength. No property changes could be ascertained in the bulked adhesives that would be negative for the restoration of delicate flat glass. T2 - Recent advances in glass and ceramics - ICOM-CC Glass and Ceramics Working Group Interim Meeting CY - Breslau / Wroclaw, Poland DA - 25.05.2016 KW - bulked epoxy adhesives KW - micro-fillers KW - nano-fillers PY - 2016 SN - 978-83-64419-80-5 SP - 155 EP - 163 AN - OPUS4-36457 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mangelsdorf, Axel A1 - Blind, K. T1 - Motives to standardize: Empirical evidence from Germany N2 - In this paper, we identify the strategic motives of German manufacturing companies in the electrical engineering and machinery industry to be involved in standards development organizations. First, we present the general motives for the formation of strategic alliances and relate them to specific standardization motives. Then, we identify pursuing specific company interests, solving technical problems, knowledge seeking, influencing regulation, and facilitating market access as motives to standardize by means of factor analysis. In a second step, we test hypotheses on the relationship between the importance of strategic motives and firm level variables, e.g. R&D intensity, innovation activities, and firm size. The results reveal that firms in electric engineering and machinery have a particularly strong interest in ensuring industry-friendly design of regulations, which can be achieved by standards. Moreover, the results confirm that small firms also from these two sectors are active in standardization alliances to access knowledge from other involved stakeholders. KW - Factor analysis KW - Standardization KW - Strategic alliances KW - Knowledge spillovers KW - Market access KW - Regulation KW - Innovation KW - R&D PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-364586 DO - https://doi.org/10.1016/j.technovation.2016.01.001 SN - 0166-4972 VL - 48-49 SP - 13 EP - 24 PB - Elsevier Science B.V. CY - Amsterdam, Netherlands AN - OPUS4-36458 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -