TY - JOUR A1 - Graf, Nora A1 - Lippitz, Andreas A1 - Gross, Thomas A1 - Pippig, F. A1 - Holländer, A. A1 - Unger, Wolfgang T1 - Determination of accessible amino groups on surfaces by chemical derivatization with 3,5-bis(trifluoromethyl)phenyl isothiocyanate and XPS/NEXAFS analysis N2 - The determination of amino groups on surfaces capable of binding biomolecules is important for the understanding and optimization of technologically relevant coupling processes. In this study, three different types of amino-functionalized model surfaces, amino thiolate on Au, amino siloxane on Si, and polyethylene (PE) foils and films reacted with 1,2-diaminoethane (DAE) were derivatized with 3,5-bis(trifluoromethyl)phenyl isothiocyanate. Subsequently, these samples were analyzed by chemical derivatization X-ray photoelectron spectroscopy (CD-XPS) and near-edge X-ray absorption fine structure spectroscopy (NEXAFS). The determination of amino groups by this analytical approach allows gaining insight into the availability of groups on surfaces that can actually serve as attachment sites for biomolecules in technical applications. In the case of the amino thiolate on Au, almost 90% of the expected amino groups were detected by CD-XPS. Investigation of the amino siloxane films revealed lower yields for the derivatization reaction in the order of 30%. The lowered reaction yields are thought to be due to interactions between the amino siloxane`s amino and silanol groups or the underlying substrate, making them inaccessible to the derivatization agent. The aminated PE samples are characterized by a complex surface chemistry and structure, and reaction yields of the derivatization reaction cannot be unequivocally derived. However, 1-3% of the total carbon atoms in the surface layer were found to be bound to amino groups accessible to the derivatization agent. It can be concluded that, depending on the detailed character of the investigated amino-terminated surface, the amount of amino groups accessible to CD-XPS can be substantially lower than the total amount of amino groups present at the surface. KW - XPS/ESCA KW - NEXAFS/XANES KW - CD-XPS KW - Amino-functionalized surfaces KW - SAM PY - 2010 DO - https://doi.org/10.1007/s00216-009-3233-7 SN - 1618-2642 SN - 1618-2650 VL - 396 IS - 2 SP - 725 EP - 738 PB - Springer CY - Berlin AN - OPUS4-20744 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dietrich, Paul A1 - Horlacher, T. A1 - Gross, Thomas A1 - Wirth, Thomas A1 - Castelli, R. A1 - Shard, A.G. A1 - Alexander, M. A1 - Seeberger, P.H. A1 - Unger, Wolfgang T1 - Surface analytical characterization of carbohydrate microarrays N2 - Microarrays are a versatile platform for diagnostics and high-throughput analysis. Carbohydrate microarrays are valuable tools to investigate interactions with other molecules since many glycans are involved in fundamental biological processes. A combined X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) surface analysis was used to investigate the basic steps in the production of carbohydrate microarrays. The preparation included coupling of a thiol-terminated mannoside to maleimide-functionalized glass surfaces derived from γ-aminopropyl silane (GAPS) slides. XPS results clearly demonstrate successful chemical modification in each fabrication step, and ToF-SIMS imaging revealed immobilized carbohydrates in the spotted regions of the final microarray. KW - Carbohydrates KW - Microarrays KW - XPS KW - ToF-SIMS KW - Nona-mannoside KW - Maleimide surfaces KW - Surface analysis PY - 2010 DO - https://doi.org/10.1002/sia.3255 SN - 0142-2421 SN - 1096-9918 VL - 42 SP - 1188 EP - 1192 PB - Wiley CY - Chichester AN - OPUS4-21500 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dietrich, Paul A1 - Horlacher, T. A1 - Gross, Thomas A1 - Wirth, Thomas A1 - Castelli, R. A1 - Shard, A.G. A1 - Alexander, M. A1 - Seeberger, P. H. A1 - Unger, Wolfgang T1 - Optimization of the performance of carbohydrate microarrays by surface chemical analysis T2 - 12th Status Seminar "Chip Technologies, Sequencing and Functional Genomics" der DECHEMA e. V. CY - Frankfurt am Main, Germany DA - 2010-02-04 PY - 2010 AN - OPUS4-20806 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meyer-Plath, Asmus A1 - Hanelt, Sven A1 - Illgen, René A1 - Jäger, Christian A1 - Mach, Reinhard A1 - Orts Gil, Guillermo A1 - Unger, Wolfgang T1 - Physikalisch-chemische Charakterisierung von CNT T2 - Inno. CNT Jahrestagung CY - Marl (North Rhine-Westphalia), Germany DA - 2010-01-20 PY - 2010 AN - OPUS4-20860 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Min, Hyegeun A1 - Wettmarshausen, Sascha A1 - Friedrich, Jörg F. A1 - Unger, Wolfgang T1 - A ToF-SIMS Study of the Deuterium-Hydrogen Exchange Induced by Ammonia Plasma Treatment of Simple Polyolefines T2 - SIMS Europe 2010 - 7th European Workshop on Secondary Ion Mass Spectrometry CY - Münster, Germany DA - 2010-09-19 PY - 2010 AN - OPUS4-21987 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Straub, Franka A1 - Wirth, Thomas A1 - Unger, Wolfgang T1 - TOF-SIMS mapping of stainless steel microstructures T2 - SIMS EUROPE 2010 - 7th European Workshop on Secondary Ion Mass Spectrometry CY - Münster, Germany DA - 2010-09-19 PY - 2010 AN - OPUS4-22011 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Girard-Lauriault, Pierre-Luc A1 - Retzko, Iris A1 - Swaraj, Sufal A1 - Matsubayashi, N. A1 - Gross, Thomas A1 - Mix, Renate A1 - Unger, Wolfgang T1 - Non-destructive In-Depth Chemical Characterization of Air Exposed Plasma Polymers by Energy Resolved XPS T2 - Twelfth International Conference on Plasma Surface Engineering CY - Garmisch-Partenkirchen, Germany DA - 2010-09-13 PY - 2010 AN - OPUS4-21424 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Poppenberg, J. A1 - Richter, S. A1 - Traulsen, H.-H. A1 - Darlatt, Erik A1 - Sattler, D. A1 - Unger, Wolfgang A1 - Schalley, C. A. T1 - Layer-by-Layer Self Assembly of Macrocycles and Rotaxanes on Gold Surfaces T2 - 24th Conference of the European Colloid and Interface Society CY - Prague, Czech Republic DA - 2010-09-05 PY - 2010 AN - OPUS4-21384 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Wolfgang T1 - ISO/TC 201 - Inhalte und Stand der Dinge T2 - DIN-Workshop: Chemische Oberflächenanalyse - Ist eine Vertretung deutscher Interessen in der Internationalen Normung notwendig? CY - Berlin, Germany DA - 2010-04-19 PY - 2010 AN - OPUS4-21185 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Wolfgang T1 - Einsatz molekularer Monoschichten in BAM - AG Schicht- und Oberflächenanalytik T2 - DFG-Rundgespräch "Molekulare Monoschichten" CY - Günzburg, Germany DA - 2010-07-12 PY - 2010 AN - OPUS4-23069 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Wolfgang T1 - BAM Certified Reference Materials for Surface Chemical and Nano Analysis T2 - International Symposium on Reference Materials NIM 2010 CY - Beijing, China DA - 2010-10-27 PY - 2010 AN - OPUS4-22398 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Wolfgang T1 - Surface Analysis Working Group: Report for 2009/10 T2 - CCQM Plenary Meeting, BIPM CY - Sèvres, France DA - 2010-04-15 PY - 2010 AN - OPUS4-21186 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dietrich, Paul A1 - Graf, Nora A1 - Gross, Thomas A1 - Lippitz, Andreas A1 - Schüpbach, B. A1 - Bashir, A. A1 - Wöll, Ch. A1 - Terfort, A. A1 - Unger, Wolfgang T1 - Self-assembled monolayers of aromatic omega-aminothiols on gold: surface chemistry and reactivity N2 - Amino-terminated self-assembled monolayers on gold substrates were studied by X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure (NEXAFS) measurements, and atomic force microscopy (AFM). Two different ω-amino-4,4'-terphenyl substituted alkanethiols of the general structure H2N-(C6H4)3-(CH2)n-SH (ATPn) were used: 2-(4''-amino-1,1':4',1''-terphenyl-4-yl)ethane-1-thiol (n = 2, ATP2) and 3-(4''-amino-1,1':4',1''-terphenyl-4-yl)propane-1-thiol (n = 3, ATP3). Moreover, the addressability of amino groups within the films was investigated by chemical derivatization of ATPn SAMs with 3,5-bis(trifluoromethyl)phenyl isothiocyanate (ITC) forming fluorinated thiourea ATPn-F films. Evaluation of high-resolution C 1s and N 1s XPS data revealed successful derivatization of at least 50% of surface amino species. Furthermore, it could be demonstrated by angle-resolved NEXAFS spectroscopy that chemical derivatization with ITC has no noticeable influence on the preferential upright orientation of the molecules in the SAMs. KW - Gold KW - Self-assembled monolayer KW - Thiols KW - Amino surfaces KW - XPS KW - NEXAFS PY - 2010 DO - https://doi.org/10.1021/la903293b SN - 0743-7463 SN - 1520-5827 VL - 26 IS - 6 SP - 3949 EP - 3954 PB - American Chemical Society CY - Washington, DC AN - OPUS4-20990 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Senoner, Mathias A1 - Wirth, Thomas A1 - Unger, Wolfgang T1 - Imaging surface analysis: Lateral resolution and its relation to contrast and noise N2 - Lateral resolution, also called image resolution, is the most relevant quality parameter of maps and line scans. Therefore well defined procedures for the determination of lateral resolution are required. In the surface analysis community different definitions of lateral resolution are in use and there is no generally accepted method for the determination of lateral resolution which meets the demands of the state-of-the-art in surface analysis. We propose the determination of lateral resolution by imaging of well defined square-wave gratings with finely graded periods. This method enables the real time estimation of lateral resolution and the adjustment of instrument settings with respect to lateral resolution. The effect of noise and contrast on lateral resolution has been analysed by numerically simulated images of square-wave gratings. A new resolution criterion has been developed which is based on the dip-to-noise ratio and takes into account the sampling step width by introducing a "reduced noise". The contrast transfer function has been introduced and its relation to lateral resolution in the presence of noise was analysed. For that reason an "effective cut-off frequency" was defined which is the reciprocal of the lateral resolution. Normalized values of lateral resolution and their relation to signal-to-noise ratio and sampling step width were given for Gaussian and Lorentzian line spread functions. These values enable the calculation of experimental parameters which are necessary to get a required value of lateral resolution. Finally the successful application of the proposed approach to determine lateral resolution has been demonstrated by ToF-SIMS element mapping of the certified reference material BAM-L200. KW - Auflösungskriterium KW - BAM-L200 KW - Effektive cut-off Funktion KW - Laterale Auflösung KW - Kontrast KW - Kontrasttransferfunktion KW - Linienverwaschungsfunktion KW - Rauschen PY - 2010 DO - https://doi.org/10.1039/c004323k SN - 0267-9477 SN - 1364-5544 VL - 25 SP - 1440 EP - 1452 PB - Royal Society of Chemistry CY - London AN - OPUS4-21875 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gross, Thomas A1 - Pippig, F. A1 - Merz, B. A1 - Merz, R. A1 - Vohrer, U. A1 - Mix, Renate A1 - Steffen, H. A1 - Bremser, Wolfram A1 - Unger, Wolfgang T1 - Determination of OH groups at plasma oxidised poly(propylene) by TFAA chemical derivatisation XPS: an inter-laboratory comparison N2 - A first inter-laboratory comparison was conducted to demonstrate and document the capability of interested laboratories to measure the fraction of C—OH species on a plasma oxidised poly(propylene) sample by using a chemical derivatisation XPS approach. This report presents the results from that inter-laboratory comparison and includes the data received for the measured values and their associated standard deviations of laboratory means, at a 95% confidence level. The measurements were guided by a protocol developed within the group before and summarised shortly in the paper. Standard deviations that may characterise the state-of-the-art for the nominally simple and rather often practised case of TFAA chemical derivatisation XPS of C—OH species on a plasma oxidised polyolefin surface are calculated following ISO 5725-2:1994. The main conclusion is that the associated degree of equivalence reached by the participating laboratories in this comparison is still low. Further research to improve chemical derivatisation XPS protocols is mandatory. KW - Chemical derivatisation KW - ESCA/XPS KW - Inter-laboratory comparison KW - Photoelectron spectroscopy (PES) KW - Poly(propylene) (PP) PY - 2010 DO - https://doi.org/10.1002/ppap.200900142 SN - 1612-8850 SN - 1612-8869 VL - 7 IS - 6 SP - 494 EP - 503 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-21678 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Straub, Franka A1 - Wirth, Thomas A1 - Hertwig, Andreas A1 - Hodoroaba, Vasile-Dan A1 - Unger, Wolfgang A1 - Böllinghaus, Thomas T1 - Imaging the microstructure of duplex stainless steel samples with TOF-SIMS N2 - Time-of-flight secondary ion mass spectrometry (TOF-SIMS) mappings provide a visualization of the distribution of chemical elements and phases on polished duplex steel surfaces as element and fragment secondary ion signals. The advantage of TOF-SIMS, compared to optical microscopy, is its potential to analyze the chemical composition with a lateral resolution at a submicrometer scale. TOF-SIMS mappings allow distinguishing between ferritic and austenitic phases because of the phase selective detection method without any requirement of etching or other processing. KW - TOF-SIMS mappings KW - Duplex stainless steel KW - Surface analysis KW - Ferritic phase KW - Austenitic phase PY - 2010 UR - http://onlinelibrary.wiley.com/doi/10.1002/sia.3385/pdf DO - https://doi.org/10.1002/sia.3385 SN - 0142-2421 SN - 1096-9918 VL - 42 IS - 6-7 SP - 739 EP - 742 PB - Wiley CY - Chichester AN - OPUS4-21818 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dietrich, Paul A1 - Horlacher, T. A1 - Gross, Thomas A1 - Castelli, R. A1 - Rurack, Knut A1 - Seeberger, P. H. A1 - Unger, Wolfgang T1 - Optimization of carbohydrate microarray performances T2 - Bunsentagung 2010 "Interfacial Systems Chemistry: Out of the Vacuumm, Through the Liquid, Into the Cell" CY - Bielefeld, Germany DA - 2010-05-13 PY - 2010 AN - OPUS4-21366 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Richter, S. A1 - Poppenberg, J. A1 - Sokolowski, A. A1 - Dzyuba, E. V. A1 - Darlatt, Erik A1 - Unger, Wolfgang A1 - Schalley, C. A. T1 - The Belousov-Zhabotinsky reaction as an engine for the directed transportation of macroscopic particles on surfaces T2 - 24th Conference of the European Colloid and Interface Society CY - Prague, Czech Republic DA - 2010-09-05 PY - 2010 AN - OPUS4-21383 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Müller, H. S. A1 - Fenchel, M. A1 - Wiggenhauser, Herbert A1 - Maierhofer, Christiane A1 - Krause, Martin A1 - Gardei, André A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Röllig, Mathias A1 - Wöstmann, Jens T1 - Zerstörungsfreie Ortung von Gefügestörungen in Betonbodenplatten N2 - Das Ziel des Forschungsvorhabens „Zerstörungsfreie Ortung von Gefügestörungen in Betonbodenplatten“ bestand in der Entwicklung eines Untersuchungskonzepts zur sicheren Ortung und Erfassung von Gefügestörungen in einseitig zugänglichen Betonplatten durch den kombinierten Einsatz verschiedener zerstörungsfreier Prüfverfahren. Hierfür wurde die Leistungsfähigkeit der folgenden Messverfahren hinsichtlich ihrer Aussageschärfe, Anwendungsgrenzen und Messgeschwindigkeit bei praxisnahen Randbedingungen untersucht: - Impakt-Echo, manuelle Impaktauslösung - Impakt-Echo, automatisierte Impaktauslösung - Ultraschall-Echo mit multistatischem Array - Impuls-Thermografie - Radar Als Versuchskörper dienten sechs liegend hergestellte Betonplatten der Abmessungen 200/200/30 cm aus zwei verschiedenen Betongüten und mit unterschiedlichem Bewehrungsgehalt (Bewehrungsgrade 0 %, 0 ,9 %, 2 ,6 %), von denen vier Platten auf trockenem und zwei Platten auf ständig nass gehaltenem Sand gelagert waren. Alle sechs Platten enthielten jeweils dieselben künstlich eingebrachten Fehlstellen: vier quadratische Kiesnester in unterschiedlicher Tiefe mit Kantenlängen zwischen 10 und 15 cm sowie drei oberflächennahe Hohlstellen (Ø 4/6/8 cm). Zur Erfassung eines möglichen Einflusses des Betonalters wurden die Messungen 4 Tage, 28 Tage sowie 180 Tage nach Herstellung der Platten durchgeführt. Um aus den Untersuchungen einen breiten Nutzen für die Praxis zu erzielen, basierten die eingesetzten Messverfahren auf handelsüblichen Geräten, welche jedoch bezüglich ihres Messprinzips und insbesondere der Datenerfassung und -auswertung weiterentwickelt wurden. Die Fehlstellengröße wurde bewusst klein gewählt. Mit Ausnahme des manuellen Impakt-Echo-Verfahrens, mit welchem unter Verwendung der Originalsoftware des Herstellers keine Fehlstellen nachweisbar waren, zeigten sich alle Messverfahren geeignet, unter verschiedenen Randbedingungen Gefügestörungen zu lokalisieren. Insgesamt wurde jeder Fehlstellentyp von zumindest einem Verfahren bei mindestens zwei Versuchskörpern detektiert. Es konnten jedoch an keiner Betonplatte mit einem einzelnen Messverfahren alle vorhandenen Fehlstellen an allen Messterminen geortet werden. Am häufigsten wurden die beiden großen oberflächennahen Fehlstellen (Hohlstelle Ø 8 cm, Kiesnest 10 cm) erkannt. Am schwersten zu lokalisieren waren die kleine Hohlstelle mit 4 cm Durchmesser sowie die beiden auf der Unterseite gelegenen Kiesnester. Die Untersuchungen zeigen, dass für eine erfolgreiche Anwendung zerstörungsfreier Messverfahren in der Praxis die Auswahl des am besten geeigneten Verfahrens bzw. einer Kombination verschiedener Verfahren jeweils auf die vorliegende Problemstellung abgestimmt sein muss. Für Betonbodenplatten mit hohem Feuchtegehalt (junger Beton) oder starker Bewehrung ist entweder das Ultraschall- oder das Impakt-Echo-Verfahren geeignet. Das Ultraschall-Verfahren wird von hohen Bewehrungsgehalten zwar stärker beeinflusst als das Impakt-Echo-Verfahren, besitzt aber eine bessere Auflösung und ermöglicht auch im oberflächennahen Bereich eine quantitative Bestimmung der Fehlstellentiefe. Das Impakt-Echo-Verfahren kann wegen der niederfrequenten Impulsanregung Fehlstellen erst in größeren Tiefen und mit schlechterer Auflösung nachweisen, ist aber ideal geeignet zur Bestimmung der Plattendicke aufgrund seines signifikanten Rückwandechos. Sowohl das Radar-Verfahren als auch die Impuls-Thermografie können bei hohen Feuchte- und Bewehrungsgehalten nur sehr oberflächennah eingesetzt werden. Bei trockenem Beton und geringen bis mittleren Bewehrungsgehalten liefert das Radar-Verfahren sehr gute Ergebnisse. In kurzer Zeit ermöglicht es eine flächendeckende Ortung der Tiefenlage und Größe von Inhomogenitäten bei guter Auflösungsgenauigkeit. Vorhandene Bewehrung wird deutlich abgebildet, kann aber darunterliegende Fehlstellen verschatten. Alternativ kann die Impuls-Thermografie für die Ortung oberflächennaher Gefügestörungen eingesetzt werden. Das Verfahren eignet sich insbesondere bei Oberflächen, die nicht direkt zugänglich sind, da zwischen Infrarotkamera und Messobjekt nur Sichtkontakt bestehen muss. Die Betongüte hatte bei keinem eingesetzten Verfahren einen erkennbaren Einfluss auf die Messergebnisse. Streng genommen ist dies jedoch nur für den Einfluss des Wasserzementwertes, der Zementart und des Zementgehalts bei gleichbleibender Sieblinie und gleicher Kornart gültig. Bei Verwendung von Leichtzuschlag sind abweichende Ergebnisse denkbar. PY - 2010 SN - 978-3-410-65075-1 SN - 0171-7197 IS - 589 SP - 1 EP - 88 PB - Beuth CY - Berlin AN - OPUS4-22699 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krankenhagen, Rainer A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Kalisch, U. T1 - Qualifizierung und Vergleich zerstörungsfreier Prüfverfahren an historischem Mauerwerk: Messungen an Probekörpern und Fallstudie T2 - 4 Konservierungswissenschaftlichen Kolloquiums in Berlin/Brandenburg CY - Potsdam, Germany DA - 2010-10-29 PY - 2010 AN - OPUS4-22492 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Maierhofer, Christiane ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Planning a non-destructive test programme for reinforced concrete structures KW - Non-destructive testing KW - Concrete KW - On-site assessment KW - Method validation KW - Quality assurance PY - 2010 SN - 978-1-84569-950-5 VL - 2 IS - Chapter 1 SP - 3 EP - 13 PB - Woodhead Publ. AN - OPUS4-22610 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlichting, Joachim A1 - Maierhofer, Christiane A1 - Kreutzbruck, Marc T1 - Defect Sizing by local Excitation Thermography T2 - Quantitative Infrared Thermography International Conference 2010 (QIRT) CY - Quebec City, Canada DA - 2010-07-27 PY - 2010 AN - OPUS4-21964 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Maierhofer, Christiane T1 - Verbesserung der zerstörungsfreien Prüfung vor Ort durch den Einsatz bildgebender Verfahren T2 - Wissenschaft trifft Handwerk CY - Berlin, Germany DA - 2010-09-22 PY - 2010 AN - OPUS4-23497 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Mecke, R. A1 - Schiller, M. A1 - Kalisch, U. A1 - Meinhardt, J. A1 - Hennen, C. T1 - Kombination der aktiven Thermografie mit laserbasierten Verfahren zur Erfassung von 3D-Geometrien in der Denkmalpflege T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - ZfPBau KW - Denkmalpflege KW - Statue KW - Aktive Thermografie KW - Lichtschnittverfahren KW - Laserscanner KW - Verfahrenskombination PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 (Poster 06) SP - 1 EP - 8 CY - Berlin AN - OPUS4-21063 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bosiljkov, V. A1 - Maierhofer, Christiane A1 - Köpp, Christian A1 - Wöstmann, Jens T1 - Assessment of structure through non-destructive tests (NDT) and minor destructive tests (MDT) investigation: case study of the church at carthusian monastery at Zice (Slovenia) KW - On-site investigation KW - Destructive and non-destructive tests KW - Radar KW - Thermography KW - Historic masonry KW - Structural and material characterization PY - 2010 DO - https://doi.org/10.1080/15583050902731031 SN - 1558-3058 SN - 1558-3066 VL - 4 SP - 1 EP - 15 PB - Taylor & Francis CY - Philadelphia, Pa., USA AN - OPUS4-20465 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, A. A1 - Neumann, H.-H. A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Bluhm, J. T1 - Praktische Untersuchungen an Kulturgütern und Verkehrsbauten in der Baudenkmalpflege T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - ZfPBau KW - Kulturgüter KW - Fallstudien KW - Radar KW - Aktive Thermografie KW - Endoskopie PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 (Vortrag 11) SP - 1 EP - 14 CY - Berlin AN - OPUS4-21065 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hasenstab, A. A1 - Neumann, H.-H. A1 - Arndt, Ralf A1 - Bluhm, J. A1 - Maierhofer, Christiane T1 - Praktische Untersuchungen an Kulturgütern und Verkehrsbauten in der Baudenkmalpflege T2 - Fachtagung Bauwerksdiagnose CY - Berlin, Germany DA - 2010-02-18 PY - 2010 AN - OPUS4-21004 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Maierhofer, Christiane A1 - Höhn, J. T1 - Thermografie am Schichtsystem Putz auf Beton im Labor und in der Praxis T2 - Fachtagung Bauwerksdiagnose CY - Berlin, Germany DA - 2010-02-18 PY - 2010 AN - OPUS4-21025 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Mecke, R. A1 - Seidl, T. A1 - Schiller, M. A1 - Kalisch, U. A1 - Meinhardt, J. A1 - Hennen, C. T1 - Entwicklung und Kombination optischer und thermografischer zerstörungsfreier Messverfahren zur Bewertung von Bauteiloberflächen und -grenzflächen N2 - Die Kombination und direkte Datenfusion der Ergebnisse von 3DLaserscannern zur Erfassung der Geometrie und der aktiven Thermografie zur Ortung verdeckter Hohlstellen und anderer Inhomogenitäten liefert umfassende quantitative Informationen über die Zuordnung von Merkmalen und Veränderungen eines Bauteils. In diesem Beitrag werden die erforderlichen Verfahrensspezifikationen, das Prinzip der Datenüberlagerung und ausgewählte Fallstudien aus der Denkmalpflege vorgestellt. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Mi.1.C.1) SP - 1 EP - 9 CY - Berlin AN - OPUS4-21870 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kervalishvili, Guram N. A1 - Schlichting, Joachim A1 - Maierhofer, Christiane A1 - Kreutzbruck, Marc T1 - Heat Transfer Modeling of Local Thermal Excitation for Surface Crack Detection and Characterization T2 - 10th European Conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-21648 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Maierhofer, Christiane A1 - Mecke, R. A1 - Hofmann, Michael A1 - Schiller, M. A1 - Kalisch, U. A1 - Meinhardt-Degen, J. T1 - Quantification of damage processes at surfaces and interfaces of building structures using optical methods and active thermography T2 - 10th European Conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-21649 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlichting, Joachim A1 - Kervalishvili, Guram N. A1 - Maierhofer, Christiane A1 - Kreutzbruck, Marc T1 - Geometrische Charakterisierung von Fehlstellen mittels lokal angeregter aktiver Thermografie / Characterizing geometrical parameters of voids with locally excited active thermography T2 - Sensoren und Messsysteme 2010 - 15. ITG/GMA-Fachtagung CY - Nürnberg, Deutschland DA - 2010-05-18 PY - 2010 SN - 978-3-8007-3260-9 IS - Paper 120 SP - 682 EP - 687 PB - VDE Verlag GmbH CY - Berlin, Offenbach AN - OPUS4-21855 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Untersuchung von Schädigungsprozessen an Bauteiloberflächen und -grenzflächen mit Hilfe optischer und thermografischer zerstörungsfreier Prüfverfahren, Ergebnisse eines Projektes der Forschungsinitiative Zukunft Bau T2 - Seminar Thermografie am Bau, Deutsche Gesellschaft für Zerstörungsfreie Prüfung CY - Berlin, Germany DA - 2010-05-04 PY - 2010 AN - OPUS4-21750 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias T1 - Entwicklung und Kombination optischer und thermografischer zerstörungsfreier Messverfahren zur Bewertung von Bauteiloberflächen und -grenzflächen T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21758 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harrer, Andrea A1 - Krankenhagen, Rainer A1 - Nies, Daniel A1 - Stephan, Ina A1 - Maierhofer, Christiane T1 - Visualisation of Transport Processes in Building Materials by Laser Induced Active Thermography T2 - 10th European Conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-21645 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krankenhagen, Rainer A1 - Kervalishvili, Guram N. A1 - Maierhofer, Christiane T1 - Influence of air gaps on the thermal behaviour of plaster-concrete-bonds T2 - QIRT 2010 CY - Quebec City, Canada DA - 2010-07-27 PY - 2010 AN - OPUS4-21918 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schlichting, Joachim A1 - Maierhofer, Christiane A1 - Kreutzbruck, Marc T1 - Defect sizing by local excitation thermography N2 - In this article, we present a measurement procedure to gain information about depth and angle of open surface cracks. The method is based on a local excitation with, e.g., a laser. The resulting surface temperature is recorded with an infrared camera. Based on this data, crack-caused anisotropies in the lateral heat flow can be detected and exploited to characterise the cracks. The experimental set-up is based on a Nd:YAG laser. The beam is focused on the test sample by using an optical scanner to generate the required lateral heat flow. The time resolved temperature distribution is recorded with a high-speed infrared camera (InSb FPA, 3 to 5 µm) providing a frame rate of up to 500 Hz. Up to now, only qualitative information was gained from measurements of this type. Whereas the local transient behaviour of temperature distribution provides also quantitative information of the crack parameters. The general concept of the method presented herein has already been published [1], but the mentioned publication is focused on the crack depth only. In this paper, we can show that it is possible to simultaneously resolve the angle and depth and, in particular, the depth of non-perpendicular cracks. T2 - QIRT 10 - 10th International conference on Quantitative InfraRed Thermography CY - Québec, Canada DA - 2010-07-27 KW - FEM KW - Risse KW - Thermografie PY - 2010 UR - http://qirt.gel.ulaval.ca/archives/qirt2010/papers/QIRT%202010-121.pdf SN - 978-2-9809199-1-6 IS - QIRT 2010-121 SP - 773 EP - 780 AN - OPUS4-21957 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kervalishvili, Guram N. A1 - Schlichting, Joachim A1 - Maierhofer, Christiane A1 - Kreutzbruck, Marc T1 - Heat transfer modeling of local thermal excitation for surface crack detection and characterization N2 - In the presented paper the use of local excitation (laser beam) for crack detection and characterization is simulated. As we could see, using the temperature differences between two reference points was large enough to detect and characterize the crack, even for such small value of laser power as 2 W. The influence of radiation and convection on the temperature difference was negligible (about 0.1%). The influence of heat conduction, in case of crack with air, was very small (about 3%). The main mechanism which influences the temperature differences between the reference points is the heat conduction in steel. From the presented results one can see that temperature differences are increasing with an increase of the crack depth or the crack length. Better resolution and characterization of the crack depths and lengths should be achieved with increased duration of heating time or the laser power. We could also see that the best position for the laser spot to characterize the crack is the closest one. Also, comparison of 2D and 3D simulation results for circular heat source used as local excitation mechanism had showed that only full 3D modelling will allow accomplishing a quantitative level of comparison between experimental and simulation results. T2 - ECNDT 2010 - 10th European conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 KW - Thermography KW - Heat transfer modeling KW - Surface crack PY - 2010 SN - 978-1-617-82791-4 SP - 1 EP - 10 AN - OPUS4-22973 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Harrer, Andrea A1 - Nies, Daniel A1 - Pulz, Robert A1 - Röllig, Mathias A1 - Rehmer, Birgit T1 - Untersuchung von Transport- und Schädigungsprozessen in Keramiken und mineralischen Baustoffen mit lokal und global angeregter aktiver Thermografie N2 - In diesem Beitrag wird die Entwicklung eines aktiven Thermografieverfahrens zur zeit- und ortsaufgelösten in-situ und Echtzeit-Visualisierung von Transport- und Schädigungsprozessen für Anwendungen in Industrie und Umwelt vorgestellt. Das Verfahren ermöglicht unter Verwendung verschiedener thermischer Anregungsquellen u.a. die Bestimmung der thermischen Materialeigenschaften von Keramiken und trockenen und feuchten mineralischen Baustoffen. Schädigungsprozesse in Keramiken können in-situ visualisiert werden. Weiterhin werden Messergebnisse vorgestellt, die während des kapillaren Feuchtetransports in Naturstein erfasst wurden und diesen abbilden können. T2 - Sensoren und Messsysteme 2010 - 15. ITG/GMA-Fachtagung CY - Nürnberg, Deutschland DA - 2010-05-18 PY - 2010 SN - 978-3-8007-3260-9 IS - Paper 116 SP - 658 EP - 663 PB - VDE Verlag GmbH CY - Berlin, Offenbach AN - OPUS4-21949 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Schiller, M. A1 - Mecke, R. A1 - Seidl, T. A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Kalisch, U. A1 - Meinhardt, J. A1 - Hennen, C. T1 - Fallbeispiele für die Anwendung der 3D-Messtechnik und der aktiven Thermografie in der Denkmalpflege T2 - 4. Konservierungswissenschaftliches Kolloquium - Zerstörungsfreie Oberflächenuntersuchungsmethoden - Stand der Technik, Grenzen und Ausblicke CY - Potsdam, Deutschland DA - 2010-10-29 KW - Historisches Mauerwerk KW - Aktive Thermografie KW - 3D-Laserscanner KW - Datenfusion KW - Monitoring PY - 2010 SN - 978-3-88462-305-3 IS - Kap. 3 SP - 26 EP - 31 PB - Wernersche Verlagsgesellschaft AN - OPUS4-22636 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Maierhofer, Christiane A1 - Kohl, Christoph A1 - Wöstmann, Jens ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Combining the results of various non-destructive evaluation techniques for reinforced concrete: data fusion KW - Non-destructive testing KW - Concrete KW - Data fusion KW - Radar KW - Ultrasonic techniques PY - 2010 SN - 978-1-84569-950-5 VL - 2 IS - Chapter 5 SP - 95 EP - 107 PB - Woodhead Publ. AN - OPUS4-22607 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Peplinski, Burkhard A1 - Adam, Christian A1 - Adamczyk, Burkart A1 - Vogel, Christian A1 - Grabner, Angela A1 - Götze, Ramona A1 - Wellendorf, Stephan A1 - Michaelis, Matthias A1 - Feldmann, Ines A1 - Menzel, Michael A1 - Scholz, G. A1 - Reuther, H. T1 - A comparative study of commercial sewage sludge ashes (SSA) produced at HVC (DRSH) and SNB and of well defined model substances synthesized at BAM by X-ray powder diffraction (XRD) and other analytical techniques (ICP, XRF, SEM & EDX, Mossbauer spectroscopy, 27Al- and 31P solid state NMR) T2 - Meeting mit Industriepartnern des EU-Projekts SUSYPHOS/ Eurostar CY - Dordrecht, Netherlands DA - 2010-06-24 PY - 2010 AN - OPUS4-22445 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Peplinski, Burkhard A1 - Adamczyk, Burkart A1 - Vogel, Christian A1 - Adam, Christian A1 - Krahl, Thoralf A1 - Michaelis, Matthias A1 - Emmerling, Franziska A1 - Scholz, G. T1 - On the fast crystallization of the tridymite form of doped AlPO4 from a mixture of amorphous and crystalline precursor components and the chemical stabilization of its hexagonal high-temperature form at room temperature T2 - 88th Annual Meeting of the German Mineralogical Society CY - Münster, Germany DA - 2010-09-18 PY - 2010 AN - OPUS4-22448 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krahl, Thoralf A1 - Scholz, G. A1 - Peplinski, Burkhard A1 - Adamczyk, Burkart A1 - Adam, Christian A1 - Jäger, Christian A1 - Kemnitz, E. T1 - Multinuclear NMR investigation of the tridymite form of doped AIPO4 T2 - 32. Discussion Meeting & Joint Benelux/German Magnetic Resonance Conference, organized by the GDCh, Division of Magnetic Resonance Spectroscopy CY - Münster, Germany DA - 2010-09-20 PY - 2010 AN - OPUS4-21966 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Peplinski, Burkhard A1 - Adam, Christian A1 - Vogel, Christian A1 - Adamczyk, Burkart A1 - Menzel, Michael A1 - Simon, Franz-Georg A1 - Emmerling, Franziska A1 - Reuther, H. T1 - First identification of AIPO4 tridymite in a municipal sewage sludge ash T2 - 12. European Powder Diffracion Conference (EPDIC-12) CY - Darmstadt, Germany DA - 2010-08-27 PY - 2010 AN - OPUS4-21968 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Adam, Christian A1 - Brenneis, Rudolf A1 - Adamczyk, Burkart T1 - Möglichkeiten der thermochemischen Behandlung von Reststoffen KW - Thermochemische Stofftrennung KW - Wertstoffrückgewinnung PY - 2010 DO - https://doi.org/10.1002/cite.201050012 SN - 0009-286X SN - 1522-2640 VL - 82 IS - 9 SP - 1579 EP - 1580 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-22004 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian A1 - Adamczyk, Burkart A1 - Brenneis, Rudolf T1 - Möglichkeiten der thermochemischen Behandlung von Reststoffen T2 - ProcessNet Jahrestagung CY - Aachen, Germany DA - 2010-09-21 PY - 2010 AN - OPUS4-22388 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian A1 - Brenneis, Rudolf A1 - Adamczyk, Burkart A1 - Simon, Franz-Georg T1 - Recycling of waste materials by thermochemical treatment T2 - ISWA World congress 2010 - Urban development and sustainbility - a major challenge for waste management in the 21st century CY - Hamburg, Germany DA - 2010-11-15 KW - thermochemical substance separation KW - Thermodynamics KW - Thermochemistry PY - 2010 SP - 1 EP - 10(?) AN - OPUS4-22467 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian A1 - Brenneis, Rudolf A1 - Adamczyk, Burkart A1 - Simon, Franz-Georg T1 - Recycling of Waste Materials by Thermochemical Treatment T2 - ISWA World Congress 2010 Urban Development and Sustainability - a Major Challenge for Waste Management in the 21st Century CY - Hamburg, Germany DA - 2010-11-15 PY - 2010 AN - OPUS4-22473 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Adamczyk, Burkart A1 - Brenneis, Rudolf A1 - Adam, Christian A1 - Mudersbach, D. T1 - Recovery of chromium from AOD-converter slags N2 - Slags from the production of high-alloyed steel contain both chemically bound chromium (mainly as Cr2O3) in the mineral fraction and elemental chromium in the metallic remainders. Thermochemical post treatment of the slag in an electric arc furnace under reducing conditions enables the nearly complete recovery of the total amount of chromium in form of a metallic alloy. The best results were achieved by resistance melting (submerged electrodes) with addition of a reducing agent into the melt. The efficiencies of the reducing agents carbon, aluminium, silicon (as ferrosilicon) and silicon carbide were investigated and compared. As aluminium is the strongest reducing agent, it is less selective and reduces much more SiO2 than Cr2O3. While SiC shows only low reactivity because of its high thermal resistance, carbon and silicon had the highest reducing potentials: More than 97% of the chemically bound chromium can be recovered by application of these reducing agents. Due to the high temperature required for the reduction of the chromium compounds, the reduction of SiO2 as an undesired side reaction cannot be avoided. However, compared with mechanical procedures that are limited to the recovery of the metallic remainders, the total chromium recovery can be significantly increased by the described reductive melting procedure. KW - Arc furnace KW - By-product KW - Chromium recovery KW - High-alloyed steel KW - Reductive melting KW - Slag treatment KW - Slag KW - Thermochemical treatment PY - 2010 DO - https://doi.org/10.1002/srin.201000193 SN - 1611-3683 SN - 0177-4832 VL - 81 IS - 12 SP - 1078 EP - 1083 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-22898 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -