TY - GEN ED - Rockland, Ulrike T1 - Jahresbericht 2009 T1 - Annual report 2009 T3 - BAM Reports/Jahresberichte - 2009 PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-4546 SN - 0934-9456 N1 - Volltext (PDF) in deutsch und englisch - Full text (PDF) in German and English VL - 2009 SP - 1 EP - 118 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-454 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Schlüter, Vivien Gisela T1 - Entwicklung eines experimentell gestützten Bewertungsverfahrens zur Optimierung und Charakterisierung der Dehnungsübertragung oberflächenapplizierter Faser-Bragg-Gitter-Sensoren N2 - Faser-Bragg-Gitter (FBG) werden als Dehnungssensoren zur Bestimmung der Bauteilverformung dort eingesetzt, wo herkömmliche elektrische Dehnungsmesstechnik an ihre Grenzen stößt (z. B. im Hochspannungsbereich, bei starken elektromagnetischen Feldern, in der Medizintechnik, in sicherheitsrelevanten und strahlungsbelasteten Bereichen). Die Applizierung dieser Sensoren auf Oberflächen verschiedener Materialien und die Qualifizierung der FBG als Dehnungssensoren sind Gegenstand dieser Arbeit. Bisher ist für oberflächenapplizierte FBGDehnungssensoren kein geprüftes und zertifiziertes Applizierungsverfahren bekannt. Die Bestimmung der Dehnungsübertragung und die Definition eines Dehnungsübertragungskoeffizienten aus der Änderung der Bragg- Wellenlänge in Relation zur Dehnung des Messobjekts sind bisher mit keinem experimentellen Prüfverfahren validiert worden. Diese Arbeit behandelt die Entwicklung einer Messmethodik zur Bestimmung der Dehnungsübertragung zwischen Messobjekt und FBG- Dehnungssensor durch ein physikalisch unabhängiges optisches Referenzverfahren. Die auf die Dehnungsübertragung Einfluss nehmenden Parameter wurden zunächst experimentell quantifiziert und die Wellenlängenänderung der FBG-Dehnungssensoren in Relation zur Dehnungsmessung mit Dehnungsmessstreifen analysiert. Einige Werkstoffkennwerte der eingesetzten Klebstoffe wurden bestimmt. Auf Basis dieser Untersuchungen wurde im Rahmen dieser Arbeit eine Prüfeinrichtung für oberflächenapplizierte FBG-Dehnungssensoren aufgebaut. Die Funktionsfähigkeit der Messmethodik wird aufgezeigt. Untersuchungen, die die Charakterisierung der Prüfeinrichtung und die Validierbarkeit von FBG-Dehnungssensoren durch die hier entwickelte Messmethode zum Ziel haben, sind in dieser Arbeit begonnen worden. Für den Spezialfall der Dehnungsermittlung an einem Rotorblatt sind oberflächen- applizierbare FBG-Patches entwickelt und ihr charakteristisches Verhalten untersucht worden. Es wurde zusätzlich eine Integrationstechnik für FBG-Dehnungssensoren während der Rotorblattherstellung entwickelt. Als ersten Schritt in Richtung Standardisierung der zu prüfenden Kenngrößen bei der Ermittlung der Dehnungsübertragung und der Spezifizierung von Einfluss nehmenden Parametern auf den Dehnungsübertragungskoeffizienten ist unter Mitwirkung der Autorin dieser Arbeit eine Richtlinie für den Umgang mit oberflächenapplizierten FBG- Dehnungssensoren entstanden. N2 - Fibre Bragg Gratings (FBG) as strain sensors are implemented in those areas, where conventional electrical strain gauges reach their limits (for example in areas of high voltage, strong electro-magnetic fields, medical technology, safety relevant and radiation-exposed areas). Subject of this work is the surface application and the qualification of these sensors as strain sensors on different materials. A certified and proven method of application for surface mounted sensors is not known yet. The determination of the strain transfer and the definition of a strain transfer factor out of the relation between the Bragg wavelength change and the strain of the specimen have not yet been validated experimentally with an independent validation method. The development of an experimental methodology using a physically independent optical reference method for the determination of the strain transfer between the specimen and the FBG strain sensor is the main focus of this work. The influencing parameters on the strain Distribution have been quantified experimentally and the change in Bragg wavelength has been investigated in relation to the strain measured by strain gauges. The material properties of the adhesives have been partly investigated. On the basis of these experiments a testing facility for surface applied FBG strain sensors has been developed. The functionality of the experimental methodology for the determination of the strain factor has been shown. The characterisation of the testing facility and the validity of FBG strain sensors through the experimental methodology inhere developed have been started. For the case of the strain determination in wind turbine rotor blades specially adapted FBG patches have been developed and qualified. An integration technique for FBG strain sensors into the rotor blade has been developed as well. As a first step of standardizing this measurement technique a national standard has been developed under the contribution of the author. T3 - BAM Dissertationsreihe - 56 KW - Glimmentladung KW - Rückführung KW - Reinstmetalle KW - Massenspektrometrie KW - synthetische Standards PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1024 SN - 978-3-9813346-7-8 SN - 1613-4249 VL - 56 SP - 1 EP - 151 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-102 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Weltschev, Margit T1 - Vergleich der Materialkennwerte von Formstoffen aus Polyethylen hoher Dichte mit dem Baumusterverhalten von Gefahrgutverpackungen N2 - Polyethylen hat sich über Jahre als wirtschaftlicher Blasformwerkstoff bewährt, aus dem technisch hochwertige Gefahrgutverpackungen und Großpackmittel (IBC) hergestellt werden, die ihre Qualität millionenfach unter Beweis gestellt haben. In den UN-Empfehlungen und in den darauf aufbauenden internationalen Vorschriften zur Beförderung von Gefahrgütern auf der Straße und Schiene, zur See und in der Luft wird eine Verpackungsbauart durch Konstruktion, Größe, Werkstoff und Dicke sowie Art der Ausführung und des Verpackens bestimmt. Die Bauartprüfungen müssen pro Bauart und Hersteller durchgeführt werden. Das Bestehen dieser Mindestanforderungen ist aber kein Kriterium dafür, ob der Formstoff Polyethylen aus einer anderen Produktionsstätte noch von der Bauartdefinition erfasst wird und somit ein „gleicher“ Werkstoff ist. Zum Vergleich der Polyethylenformstoffe für eine Bauart wurden in der Verfahrensregel zum Eignungsnachweis alternativer Kunststoff-Formstoffe von Verpackungen und Großpackmitteln (IBC) zur Beförderung gefährlicher Güter - BAM-GGR 003 die Eigenschaften: Schmelze-Massefließrate MFR, Dichte D, Kerbschlagzähigkeit acN bei -30 °C, Spannungsrissbeständigkeit FNCT (engl.: full notch creep test) und Beständigkeit gegen oxidativen Abbau Ox (bestimmt durch den prozentualen Anstieg der MFR in Salpetersäure) mit den entsprechenden Prüfmethoden ausgewählt sowie die Toleranzen definiert. Für den Antragsteller einer Bauartzulassung für eine Verpackung oder einen IBC ist ein Verzicht auf Bauartprüfungen letztendlich mit einer Kosten- und Zeitersparnis verbunden. Für Verpackungshersteller stellt bei häufig auftretendem Formstoffwechsel die Möglichkeit des Formstoffvergleichs mittels Werkstoffkennwerten eine große Hilfestellung bei der Bewertung des Leistungsniveaus der Formstoffe und ein Instrument zur Vorauswahl von neuen Formstoffen dar. Die Formstoffeigenschaften in der Verpackungsbauart werden durch eine Vielzahl von Faktoren wie z.B. die Formmasseeigenschaften, die Formteilgestaltung, die Werkzeuggestaltung, die Verarbeitungsbedingungen und die zeitabhängige Alterung beeinflusst. Der Nachweis der Praxisrelevanz dieser Gefahrgutregel, dass der Vergleich dieser Formstoffeigenschaften von Polyethylenen und der Vergleich der mit diesen Eigenschaften in direktem Zusammenhang stehenden Versagensgrenzen bei Baumusterprüfungen der gleichen Bauart von Verpackungen aus diesen Formstoffen zur gleichen Bewertung der Formstoffe führen, wurde mit dieser Arbeit geführt. Folgende Materialkennwerte verschiedener Polyethylenformstoffe stehen miteinander in einer systematischen Beziehung mit Baumusterprüfungen: - acN bei -30 °C//Grenzfallhöhen der Fallprüfungen bei -18 °C, - FNCT//Versagenszeiten der Stapeldruckprüfungen mit Netzmittellösung, - Ox//Grenzfallhöhen der Fallprüfungen bei -18 °C nach Konditionierung mit 55%iger Salpetersäure und - Ox//Versagenszeiten der Stapeldruckprüfungen mit 55%iger Salpetersäure. Die 21-tägige Vorlagerung mit 55%iger Salpetersäure bei 40 °C bewirkt eine Erhöhung der Grenzfallhöhe der Baumuster in den Fallprüfungen bei -18 °C im Vergleich zu den Baumustern ohne Vorlagerung und führt somit infolge Nachkristallisation des Polyethylens zu einer falschen Bewertung des Leistungsniveaus der Formstoffe. Abweichungen im Vergleich der Versagenszeiten der Baumuster aus den verschiedenen Polyethylenformstoffen lassen sich durch Anwendung weiterer Untersuchungsmethoden, wie der Fourier-Transformation-IRSpektroskopie (FTIR) erklären. Die Messung der Zugeigenschaften Zugfestigkeit und Bruchdehnung eignet sich grundsätzlich zum Vergleich der Polyethylenformstoffe hinsichtlich ihrer Beständigkeit gegen oxidativen Abbau; die Messwerte unterliegen jedoch Schwankungen. N2 - Polyethylene has been proving its worth as economical blow moulding material for many years. Technical high-value hollow articles are being produced of polyethylene which have proved their quality as dangerous goods packagings millions of times. A design type is defined by the construction, dimension, material and thickness as well as by the character and type of packaging in the UN-recommendations and thereon based international regulations for the transport of dangerous goods on road, on rail, at see and in the air. Design type tests must be performed for every design type and manufacturer. However, passing the minimum requirements is no criterion even if the polyethylene grade of another production facility meets the design type definition and is of a comparable grade forthis design type. The properties melt flow rate (MFR), relative density (D), low temperature notched Impact strength (N.I.S.) at -30 °C, environmental stress crack resistance (FNCT) and resistance to oxidative degradation Ox by nitric acid (determined by the increase of MFR) have been selected together with the corresponding test methods and tolerances for a comparison of polyethylene grades of one design type in the procedural rule on suitability proof for alternative plastic resins used for dangerous goods packagings and intermediate bulk containers (IBCs) - BAM GGR 003. A waiving of design type tests is related in the end to save costs and time for the applicant for a design type approval of a packaging or IBC. For manufacturers of packagings, the possibility of comparing plastic moulding materials by means of material parameters is a great support in evaluating of the proficiency level of grades that often change. It serves as an instrument for the pre-selection of new grades too. A multitude of factors influence the properties of plastic moulded materials in a packaging design type: for example, the properties of the plastic moulding material, components design, tool design, processing conditions and time-dependent ageing. Proof of the practical relevance of this dangerous good rule was provided with this work. A comparison of the properties of polyethylene grades and a comparison of the failure limits in design type tests with the same design type of packagings made of these grades led to the same Evaluation of the grades. The following material parameters of different polyethylene grades are in a systematic relationship to each other: - N.I.S at -30 °C//marginal drop heights of design types in drop tests at -18 °C, - FNCT//times to failure of design types in stacking tests with wetting solution, - Ox//marginal drop heights of design types in drop tests at -18 °C after conditioning with 55 % nitric acid and - Ox//times to failure of design types in stacking tests with 55 % nitric acid. Conditioning the design types with 55 % nitric acid for 21 days at 40 °C causes an increase of the marginal drop heights of the design types in drop tests at -18 °C when compared with design types without pre-storage. Therefore, there is a wrong evaluation of the proficiency level of the grades. Variations in a comparison of the design types produced of different polyethylene grades can be explained by applying additional examination methods such as Fourier transform infrared (FTIR). Measurement of tensile strength and breaking elongation is in principle suitable for a comparison of polyethylene grades regarding resistance to oxidative degradation, but the measured values are subject to variations. T3 - BAM Dissertationsreihe - 53 KW - Polyethylenformstoffe KW - Baumusterprüfungen KW - Standardflüssigkeiten KW - Materialkennwerte KW - Gefahrgutverpackungen PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1057 SN - 978-3-9812910-9-4 SN - 1613-4249 VL - 53 SP - 1 EP - 220 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-105 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Tiebe, Carlo T1 - Detektion leicht flüchtiger organischer Verbindungen mikrobiellen Ursprungs (MVOC) mittels Ionenmobilitätsspektrometrie (IMS) N2 - Spuren leicht flüchtiger organischer Verbindungen mikrobiellen Ursprungs (MVOC) in der Luft von Innenräumen können das Vorhandensein von Schimmelpilzen indizieren. Die Anwendung der Ionenmobilitätsspektrometrie (IMS) zur Detektion von leicht flüchtigen schimmelpilzspezifischenVerbindungen ist wegen ihrer hohen Empfindlichkeit viel versprechend. Um dieses analytisch-chemische Verfahren für eine Innenraumdiagnostik zu nutzen, wurde ein mobil einsetzbares Gerät zur Vor-Ort-Detektion getestet. Im ersten Teil der Arbeit wurden MVOC-Prüfgase im Labor generiert. Die Prüfgase wurden durch permeative Beimengungen in einen definierten Gasstrom hergestellt. Anhand dieser Prüfgase wurden die typischen IMS-Parameter, wie reduzierte Mobilität (K0), relative Driftzeit (trd), Konzentrationsabhängigkeit der Signale und daraus resultierend die Nachweisgrenze des Ionenmobilitätsspektrometer ermittelt. Die bestimmten Nachweisgrenzen der 14 untersuchten MVOC liegen im Bereich zwischen 2 und 192 μg m-3 (1 bis 51 ppbV). Im zweiten Teil wurden sieben oft im Innenraum nachgewiesene Schimmelpilzarten auf Nährmedien kultiviert und ihre produzierten MVOC detektiert. Dabei wurde festgestellt, dass Schimmelpilze art- und altersabhängige MVOC-Emissionen aufweisen. Eine statistische Auswertung und Bestätigung zeigte die Anwendung der Hauptkomponentenanalyse (PCA). Versuchsbegleitend erfolgte eine Identifizierung der MVOC durch gaschromatographische Analysen und bestätigte die IMS-Ergebnisse. Beim Schimmelpilzwachstum einer Mischsporenkultur auf drei verschiedenen Baumaterialien wurden die produzierten MVOC detektiert. Die IMS-Spektren wurden chemometrisch durch eine PCA ausgewertet. Es können die Spektren von unbeimpften und mit Schimmelpilzkulturen beimpften Baumaterialien damit unterscheiden werden ohne die stoffliche Zusammensetzung der Emissionskammerluft zu kennen. Im letzten Teil dieser Arbeit wurde das IMS in 27 Feldversuchen eingesetzt, um MVOC und damit ein Schimmelpilzwachstum in Innenräumen zu detektieren. In 59 % der Fälle wurde eine positive Korrelation zwischen einem sichtbaren Schimmelpilzbefall und den mittels IMS detektierten MVOC ermittelt. N2 - Traces of microbial volatile organic compounds (MVOCs) can indicate the growth of moulds in the indoor air. The application of ion mobility spectrometry (IMS) is a very promising method for the detection of these MVOCs due to its high sensitivity. A mobile IMS device was tested to use this analytical-chemical method for in situ indoor air diagnostics. The first part of this work describes the test gas generation of 14 MVOCs in the laboratory. The test gases were produced by preparation of permeation procedures. Due to the MVOCs test gases IMS parameters like reduced mobility (K0), relative drift time (trd), the concentration dependency of MVOCs signals were determined and the limit of detection (LOD) was calculated. The LODs are in the range of 2 to 192 μg m-3 (1 to 51 ppbV). In the second part of this manuscript seven different mould species were cultivated on nutrient media and their MVOCs emissions were explored. It was found out, that the MVOCs emissions of moulds have a dependency of species and of their cultivation time. These results are confirmed by principal component analysis (PCA). The identification of These MVOCs was performed by test-related GC-MS analysis and approved these results. The MVOCs emissions were explored in the cultivation of mould mixtures on three different building materials. The IMS-results were interpreted chemo metrically by PCA. It was possible to find different emission patterns of cultivated moulds on building materials without an identification of the MVOCs inside the emission chamber. In 27 field trials of different indoor environments (rooms) the IMS was tested to detect MVOCs. In 59 % of the cases a positive correlation is determined between visible mouldinfested rooms and the detected MVOCs by IMS. T3 - BAM Dissertationsreihe - 67 KW - IMS KW - Hauptkomponentenanalyse KW - Schimmelpilze KW - Ionenmobilitätsspektrometrie KW - MVOC PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-919 SN - 978-3-9813853-1-1 SN - 1613-4249 VL - 67 SP - 1 EP - 171 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-91 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Richter, Matthias T1 - Entwicklung, Validierung und Anwendung eines Verfahrens zur Erzeugung langzeitstabiler VOC-Gasgemische N2 - In dieser Arbeit wird die Entwicklung sowie Validierung eines Verfahrens zur Erzeugung langzeitstabiler VOC-Gasgemische im Konzentrationsbereich zwischen wenigen μg/m³ und einigen 100 μg/m³ beschrieben. Das Prinzip basiert auf der Verdampfung von Reinsubstanzen, die separat in Fläschchen aus Edelstahl gefüllt sind und in ihnen temperiert werden. Je nach Dampfdruck der eingefüllten Verbindungen tritt mehr oder weniger Substanz aus der Flüssig- in die Gasphase über. Ein in die Flaschen eingeleitetes Trägergas nimmt Substanzgas aus dem Gasraum auf und transportiert es in eine Gasmischkammer, in der alle Substanzdämpfe vereinigt werden. Der Trägergasstrom ist dabei so klein, dass er das Quasigleichgewicht in den Fläschchen nur wenig stört und wegen des schnellen Stoffübergangs als gesättigt angenommen werden kann. Durch die Kombination von Verdampfungstemperatur, Träger- und Verdünnungsgasflüssen ist die Einstellung eines beliebigen Konzentrationsniveaus des Gasgemischs möglich. Mit dem entwickelten Aufbau war es möglich, ein Gasgemisch aus insgesamt 25 Komponenten zu generieren. Dabei konnte für 16 der Komponenten eine stabile und reproduzierbare Gaskonzentration nachgewiesen werden. Bei den übrigen waren teilweise starke Schwankungen über den Versuchszeitraum zu beobachten. Das konnte auf konstruktionsseitige Undichtigkeiten an den Fläschchen bzw. im Leitungssystem zurückgeführt werden, die schließlich nicht komplett beseitigt werden konnten. Ein Senkeneffekt in der Anlage kann ausgeschlossen werden, und die chemische Stabilität der eingefüllten Substanzen konnte – mit Ausnahme einiger Aldehyde – nachgewiesen werden. Das Verfahren wurde erfolgreich für die Generierung von Gasstandards für einen Ringversuch eingesetzt. Ferner fand es Anwendung in einem Materialtest, bei dem die sorbierenden Eigenschaften eines Bauprodukts unterschiedlicher Zusammensetzung gegenüber den Gaskomponenten untersucht wurden. Damit konnte die Praxistauglichkeit gezeigt werden. N2 - The development as well as the validation of a gas mixing system (GMS) that enables dynamic and traceable production of stable long-term VOC gas mixtures within the range between a few μg/m³ and a few 100 μg/m³, is discussed. In this method pure liquid substances that are filled into stainless steel bottles are kept separately at a constant temperature, evaporated according to their vapour pressure and removed by a small inert gas flow. They are finally united in a gas mixing chamber. The carrier gas must be as small as possible so that the quasi-Equilibrium between the gas space and the liquid phase in the substance bottles will not be disturbed. The carrier gas is assumed to be saturated with substance gas due to a long residence time in the bottles and a fast phase transition. Any concentration Level of the gas mixture can be generated by a combination of vaporization temperature, carrier and dilution gas flows. With the GMS a mixture of 25 VOCs was prepared. For 16 compounds stable and reproducible gas concentrations were realized. Due to not completely removed leakage of some substance bottles and the tubing respectively, variation of the concentration of the remaining compounds was found. A sink effect as another reason for this variation could be expelled and the chemical stability of the vaporized substances proved with the exception of some aldehydes. The procedure was successfully applied in a round robin test and a material test. In the latter adsorption of VOCs on building products was scrutinized. In this way the applicability of the GMS could be shown. T3 - BAM Dissertationsreihe - 66 KW - Kalibrierung KW - Ringversuche KW - Materialadsorption KW - VOC-Gasgenische KW - Prüfgasgenerierung PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-920 SN - 978-3-9813550-9-3 SN - 1613-4249 VL - 66 SP - 1 EP - 174 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-92 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Schuler, Stephanie T1 - Matrixintegrierte faseroptische Sensoren für die experimentelle Bestimmung von Mikroverformungen in zementgebundenen Baustoffen N2 - Für die Entwicklung dauerhafter Hochleistungsbetone sind Untersuchungen der Zementsteinmatrix im Mikro- und Nanobereich unerlässlich. In dieser Arbeit wurden flexible extrinsische Fabry-Perot-Interferometer-Sensoren für Messungen im jungen Alter der Zementsteinmatrix und Faser-Bragg-Gitter-Sensoren für Messungen von lastbedingten Verformungen des erhärteten Betons umfassend untersucht. Die Messergebnisse der flexiblen extrinsischen Fabry-Perot-Interferometer-Sensoren für Mikroverformungsmessungen wurden mit denen eines berührungslos messenden Laservibrometers sowie der digitalen Radiographie verglichen und erfolgreich validiert. Die Rückwirkung des eingebetteten Sensors auf die Zementsteinmatrix ist der einer Stahlfaser vergleichbar. Ein Angriff der alkalischen Matrix auf die Glasfaser des Sensors wurde in dem für Verformungsmessungen relevanten Zeitraum nicht festgestellt. In den folgenden Untersuchungen wurde der Übergang der eindimensionalen Verformung während des plastischen Schwindens zu einer dreidimensionalen Verformung charakterisiert. Um die Anwendbarkeit und die Leistungsgrenze der Sensoren zu testen, wurden frühe Verformungen durch unterschiedliche Faktoren beeinflusst: Variation der Mahlfeinheit des Zements, Variation des Wasserzementwerts sowie zyklische Temperaturbelastung. Die Messungen zeigten eine vom Wasserzementwert abhängige zeitliche Differenz zwischen dem Erstarrungsende nach Vicat (t0) und dem Knickpunkt der Verformungsrate. Bei zyklischer Temperaturbelastung konnten Expansions- und Kontraktionskoeffizient einer Zementleimmischung ab dem Erstarrungsende bestimmt werden. Durch Fasersensoren, die in unmittelbarer Umgebung eines Bewehrungsstahls angeordnet wurden, war erstmals die durch den Stahl hervorgerufene Verformungsbehinderung direkt in der Zementsteinmatrix messbar. Deutlich höher ist dabei erwartungsgemäß der Verformungsbehinderungsgrad bei gerippten Stählen gegenüber glatten Stählen. Die zusätzliche Variation des Stahldurchmessers stellt eine realitätsnahe Versuchsanordnung dar. Die Messungen im mikroskopischen Maßstab im Inneren der Matrix haben gezeigt, dass mit faseroptischen Sensoren die Informationen aus der Rasterelektronenmikroskopie und Röntgenverfahren optimal ergänzt werden können. Für Faser-Bragg-Gitter-Sensoren wurde eine Schutzkonstruktion entwickelt, die eine Einbettung der optischen Faser in der Betonmatrix ermöglicht. In Vergleichsmessungen von eingebetteten Faser-Bragg-Gitter-Sensoren und oberflächenapplizierten Sensoren wurde ermittelt, dass die gemessenen Verformungen im Inneren um bis zu 5 % geringer sind als außen. N2 - Developing durable high-performance concrete requires the examination of the cement paste matrix on a micro- or nano-scale. In this thesis two types of fibre optic sensors were extensively tested: flexible extrinsic fibre Fabry-Perot sensors to measure early-age deformations of cement paste, and fibre Bragg grating sensors to measure load-dependent deformations of hardened concrete. The results of the flexible extrinsic fibre Fabry-Perot sensors were compared to the results of a non-contact laser vibrometer and successfully validated by digital radiography. The effect of the embedded sensor on the matrix is comparable to the effect of a steel fibre. During the relevant time period no degradation of the sensor’s glass fibre due to the alkaline matrix was observed. In the following investigations the transition of the one-dimensional deformation of plastic shrinkage to a three-dimensional deformation was characterized. In order to test the applicability and performance limits of the sensors to assess early-age deformations the following factors were investigated: varying cement fineness, varying water-cement-ratio and cyclic temperature changes. The measurement indicates a time gap depending on the watercement-ratio between the final set according to Vicat (t0) and the knee-point of the deformation rate. Both the thermal expansion coefficient and thermal contraction coefficient were determined from final setting during cyclic temperature changes. Due to fibre optic sensors embedded in immediate vicinity of a steel bar the restraining effect of the steel bar on the matrix was measured directly for the first time. As expected the degree of restraint provided by a ribbed bar is higher compared to that provided by a plain bar. The supplementary variation of the steel diameter exhibits a realistic test arrangement. The measurements on a micro scale inside the matrix demonstrated that fibre optic sensors optimally complement information obtained by scanning electron microscopy andradiography. For fibre Bragg grating sensors a protective cover was designed that enabled the embedment of the optical fibre into concrete. Comparing measurements of embedded fibre Bragg grating sensors and surface-applied sensors indicated that the deformation inside a concrete cube was up to 5 % lower than outside. T3 - BAM Dissertationsreihe - 65 KW - Frühverformung KW - Fabry-Perot-Interferometer-Sensoren KW - Beton KW - Schwinden KW - Faseroptische Sensoren PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-935 SN - 978-3-9813550-8-6 SN - 1613-4249 VL - 65 SP - 1 EP - 146 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-93 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Nöther, Nils T1 - Distributed Fiber Sensors in River Embankments: Advancing and Implementing the Brillouin Optical Frequency Domain Analysis N2 - Diese Arbeit beschreibt die Entwicklung eines Systems zur verteilten Dehnungsmessung in optischen Glasfasern. Das System wurde zur Überwachung der strukturellen Integrität von Flussdeichen bei einer Messlänge von mindestens 5 km und einer Ortsauflösung von höchstens 5 m entwickelt. Grundlage des Messsystems ist der nichtlineare optische Effekt der stimulierten Brillouinstreuung (SBS), der die Dehnung einer optischen Glasfaser in eine messbare Frequenzverschiebung des Rückstreulichts eines optischen Signals überträgt. Die in dieser Arbeit angewendete und grundlegend weiterentwickelte Messtechnik ist die optische Brillouin-Frequenzbereichsanalyse (BOFDA). Die grundsätzliche Funktionalität dieser Technik war bereits vor Beginn der Untersuchungen zu dieser Arbeit gezeigt worden. Allerdings war ihre Entwicklung der Brillouin-Zeitbereichsanalyse (BOTDA), die den Stand der Technik darstellt, in Bezug auf ihre Sensoreigenschaften, ihre theoretischen Grundlagen, ihre Integrierbarkeit und ihre Robustheit für praktische Anwendungen weit unterlegen. Die Arbeit umfasst den theoretischen Hintergrund des Messsystems, verschiedene Weiterentwicklungen der Implementierung in ein anwendungsorientiertes Messgerät (u. a. neue Konzepte für Signalkorrekturverfahren zur Verbesserung der Sensoreigenschaften) und die Evaluierung des Systems in experimentellen Untersuchungen. Zu Beginn werden die physikalischen Eigenschaften der SBS in optischen Fasern untersucht und die Differentialgleichungen, mit denen der Effekt beschrieben werden kann, hergeleitet. Die Analyse konzentriert sich auf die spektralen Eigenschaften der Brillouin-Wechselwirkung, um die Messung der SBS im Frequenzbereich genau beschreiben zu können. Die BOFDA- Methode wird mit einer Systembeschreibung und Betrachtungen zur praktischen Umsetzung im Labor vorgestellt. Der Laboraufbau wird im Detail beschrieben; die Beschreibung umfasst die Komponenten, verschiedene Aspekte der Weiterentwicklung gegenüber dem Entwicklungsstand vor Beginn der Arbeiten sowie repräsentative Messergebnisse. Als wichtigster Fortschritt auf dem Weg zur kompletten Implementierung des Systems wird ein digitales Verfahren zur Frequenzbereichsanalyse (mit einer Systembeschreibung, einem Demonstratoraufbau und Messergebnissen) vorgestellt. Auf Grundlage der erarbeiteten Analyse der SBS wird die physikalisch bedingte Begrenzung der Ortsauflösung des Systems untersucht. Das Ergebnis ist eine neue Interpretation von Artefakten in hochauflösenden Messungen, von der aus eine Parallele zu ähnlichen Untersuchungen bezüglich der BOTDA-Methode aufgezeigt wird. Schließlich wird die Anwendung des Messsystems im Deichmonitoring vorgestellt. Hierzu wurde eine Technik zur Integration faseroptischer Kabel in Geotextilien sowie ein optisches Sensorkabel entwickelt. In Labor- und Feldversuchen wird die Eignung des Systems für das Deichmonitoring bestätigt. Durch die Weiterentwicklung des BOFDA-Verfahrens hat das Verfahren nicht nur in Genauigkeit und Auflösung zum BOTDA-Verfahren aufgeschlossen, sondern eröffnet neue Perspektiven in Dynamik, Robustheit und Kosteneffizienz. N2 - This thesis reports on the development of a system for distributed strain measurement in silica optical fibers. The system was developed to provide a solution for monitoring the structural health of river embankments with a measurement length > 5 km and a spatial resolution < 5 m. It is based on stimulated Brillouin scattering (SBS), a nonlinear optical effect which converts the mechanical strain of an optical fiber into a frequency shift of the backscattered light of an optical signal. The measurement technique that is employed and significantly advanced within this work is the Brillouin optical frequency domain analysis (BOFDA). Prior to this work, this technique had been presented as a laboratory setup providing its proof of concept; however, at this development stage, the technique had been limited in performance, theoretical foundation, integrability and robustness for real-life applications when compared to the state-of-the-art Brillouin optical time domain analysis (BOTDA). The thesis comprises the theoretical background of the measurement system, advancements regarding its implementation into a practically applicable device – including the proposal of techniques for performance enhancements in signal processing – as well as the evaluation of the system performance in experimental studies. First, the physical nature of SBS in optical fibers is analyzed. Here, special focus is set on the frequency domain properties of the interaction between the optical signals, which provides a deep understanding of the system behaviour in the special case of distributed measurements in the frequency domain. The BOFDA technique is then presented with a thorough analysis from a system point of view and considerations on its implementation in a practical setup. The laboratory setup is presented with all components and different aspects of advancement in accuracy and efficiency over the state of development prior to this work, along with representative measurement results. As the major advancement regarding the system implementation, a digital approach to frequency domain measurements is presented, with a system description, a demonstrator setup and measurement results. A detailed analysis of the physical occurrences within the system that lead to a limitation of its spatial resolution is given, founding on the description of SBS earlier in the thesis. It comprises a novel point of view on the measurement artifacts that degrade frequency domain measurements of SBS; a connection to corresponding studies that apply to the BOTDA technique is made. From here, a novel approach to overcome the limitations by means of signal correction in post-processing is presented. Finally, the application of the measurement system in dike monitoring is presented. A method for integrating optical fibers into geotextiles is introduced, together with considerations on the coating material and handling on construction sites. By presenting several experimental tests in the laboratory and the field, the feasibility of the system for monitoring of the structural health of river embankments is confirmed. With the advancements achieved within this work, the BOFDA technique meets the specifications in accuracy and resolution of state-of-the-art BOTDA devices, while offering new perspectives in terms of dynamic range, robustness and cost efficiency. T3 - BAM Dissertationsreihe - 64 KW - Stimulated Brillouin scattering KW - Frequency domain analysis KW - Dike monitoring KW - Structural health monitoring KW - Distributed Brillouin sensing PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-948 SN - 978-3-9813550-7-9 SN - 1613-4249 VL - 64 SP - 1 EP - 157 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-94 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Mishra, Kirti Bhushan T1 - Experimental investigation and CFD simulation of organic peroxide pool fires (TBPB and TBPEH) N2 - Time averaged mass burning rate (m˙′′f ), flame length (H), temperature (T ), irradi- ance (E) and surface emissive power (SEP ) of TBPB (tert -butyl peroxybenzoate) and TBPEH (tert-butyl peroxy-2-ethylhexanoate) pool fires are measured for six pool di- ameters (d = 0.059 m, 0.107 m, 0.18 m, 0.5 m, 1 m and 3.4 m) at BAM in house and outside test facility. The measured heats of combustion (–Δhc) of TBPB and TBPEH are 30113 kJ/kg and 34455 kJ/kg and the specific heat capacities at constant pressure (cp) are 1.8 kJ/(kg K) and 2.1 kJ/(kg K) respectively. The measured m˙′′f of TBPB and TBPEH pool fires are in the range of 0.37 kg/(m2 s)≤ m˙ ′′ f ≤ 0.83 kg/(m2 s) and show little dependence on the pool diameter d, and are four to sixty times higher (for d = 1 m) than that of hydrocarbon pool fires. It is shown that the mass burning rates of the investigated organic peroxides can be represented as an exponential function of the self-accelerating decomposition temperature (SADT). Low SADT implies that the organic peroxide pool fires burn at a much higher m˙′′f than hydrocarbon pool fires. Fuel Froude numbers (Frf) of TBPB and TBPEH are 5 to 100 times (depending on d) higher than for hydrocarbon pool fires. Due to higher Frf the H of TBPB and TBPEH (measured with a S-VHS Videocamera) are found to be two times larger (d = 1 m) than corresponding pool fires of hydrocarbons. Heskestads flame length correlation predicts the Hd (d = 3.4 m) of TBPB and TBPEH pool fires much better than Thomas and Fay correlations. The measured time averaged flame temperatures T (d = 3.4 m) for TBPB and TBPEH pool fires are in the range of 1400 K ≤ T ≤ 1500 K and are 200 K to 300 K higher than for JP-4, kerosene and gasoline. The irradiances of the TBPB and TBPEH pool fires measured by radiometers are E (Δy/d = 0.3) = 45 kW/m2 and E = 98 kW/m2 which are two to ten times higher in comparison to the corresponding n-pentane, super gasoline and diesel pool fires. So the thermal safety distances for organic peroxide pool fires are larger by a factor four in comparison to the hydrocarbon pool fires. An infrared thermography system is used for the determination of SEP of TBPB and TBPEH pool fires. The values of surface emissive power for TBPB and TBPEH are SEP (d = 3.4 m) = 196 kW/m2 and SEP = 258 kW/m2 and thus the SEP are by a factor of approximately two higher than for hydrocarbon pool fires. A self-sustained pulsating Hd (’W’-Effect) is found in TBPB pool flames and is further analysed to explain the reason of occurance on the basis of chemical structure of the fuel and discontinuous heat flux back from flame to the liquid pool. CFD simulations of TBPB and TBPEH pool fires at d = 0.18 m, 0.5 m, 1 m, 3.4 m and 8 m are carried out using the Unsteady Reynolds Averaged Navier Stokes (URANS) equa- tions. The three-dimensional geometries have been discritized with unstructured hybrid grids, with the number of cells in the range of 1 million. Depending on the grid resolu- tion and the pool diameter time steps of 0.0001 s ≤ Δt ≤ 0.01 s for the CFD simulations are used. For solving the discritized equations a finite volume based implicit solver AN- SYS CFX has been used. For modelling the combustion, stoichiometric combustion for both peroxides are assumed. The temperature dependence of the reaction rate has been determined by the Arrhenius approach. For modelling the combustion eddy dissipation concept (EDC) model has been used. For turbulence buoyancy modified k- � and SAS (Scale Adaptive Simulation) turbulence models are used. For the thermal radiation and soot mass fraction discrete transfer radiation model and Magnusson soot model have been used. A new method is suggested for the prediction of mass burning rate (m˙′′f ) by CFD simula- tion. Both peroxide pool fires show approximately constant mass burning rate indepen- dent of d whereas m˙′′f of TBPEH are under predicted at the beginning but show relatively good agreement with measurements for large pool diameters (d = 1 m). In case of TBPB the CFD simulation over predicts the mass burning rate m˙′′f of small TBPB pool fires and shows a continuous decrease with d. CFD predicts the flame length H close to the measured data provided that the constants in Thomas equation are modified. The CFD predicted time averaged surface emission flame temperatures of TBPB and TBPEH pool fires (d = 3.4 m, 1437 K and 1542 K) are in good agreement with the measured time averaged flame temperatures. The CFD predicted SEP for TBPB and TBPEH pool fires (d = 3.4 m, 217 kW/m2 and 288 kW/m2) are also in agreement with the measured values. From the CFD predicted irradiance ECFD it is possible to determine the thermal safety distances from large pool fires of hydrocarbons and organic peroxides. T3 - BAM Dissertationsreihe - 63 KW - Pool fires KW - organic peroxides flame characteristics KW - safety distance KW - CFD simulation PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-950 SN - 978-3-9813550-6-2 SN - 1613-4249 VL - 63 SP - 1 EP - 150 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-95 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Hünert, Daniela T1 - Korrosionsprozesse und Aufkohlung von ferritisch-martensitischen Stählen in H2O-CO2 Atmosphären N2 - Ca. ein Viertel des in Deutschland emittierten CO2stammt aus fossil befeuerten Dampfkraftwerken, dessen Anteil es durch die Weiterentwicklung von CO2-Abtrennungstechnologien mit anschließender Speicherung in geologischen Formationen und durch die Gestaltung neuer CO2-armer Kraftwerksprozesse zu reduzieren gilt. Die hierzu in Deutschland laufenden Programme werden unter anderem innerhalb des COORETEC-Programms (CO2-Reduktions-Technologie-Programm) koordiniert [COR-04]. Allen CO2-Reduktionstechnologien ist gemein, dass die Erzeugung von speicherfähigem CO2 (Luftzerlegung zur Produktion von reinem Sauerstoff, der Separationsprozess von CO2 aus dem Rauchgas und das Komprimieren des CO2) energieaufwändig ist. Um eine CO2- Abtrennung aus den Rauchgasen und dessen Kompression wirtschaftlich zu machen, wird für kohlebefeuerte Kraftwerke eine Erhöhung des Wirkungsgrades der thermisch-elektrischen Energiewandlung angestrebt [KRA-06]. Der Wirkungsgrad ist das Verhältnis der gewonnenen elektrischen Leistung zur Wärme, die aus der Verbrennung eines Brennstoffes entsteht [DUB-90]. Er lasst sich für Dampfkraftwerke unter anderem erhöhen durch die Anhebung der Dampfparameter (Druck und Temperatur). Derzeit liegen die Dampfparameter im Bereich von 600°C und 250 bar Druck [VIS-00][VIS-06] und sollen auf 720 °C Dampftemperatur und 350 bar Druck angehoben werden [COR-99]. Eine Erhöhung des Wirkungsgrades des Grundkraftwerks ohne CO2-Abscheidung von 50 % oder mehr wird angestrebt, um eine CO2-Speicherung technisch und wirtschaftlich möglich machen [COR- 04]. Ein Ziel sind Dampfkraftwerke mit Oxyfuel-Verbrennung, bei denen die Abtrennung von CO2 nach dem Verbrennungsprozess stattfindet (post-combustion) [VAT-08]. Die Kohle wird mit reinem Sauerstoff an Stelle von Luft zu einem kohlendioxidangereicherten Rauchgas umgesetzt, aus denen sich nach der Kondensation des Wassers, der Entschwefelung und der Entstickung je nach Stickstoffanteil des Brennstoffs ein kohlendioxidreiches Gas generieren lasst. Je nach Kohle und Vorbehandlung der Kohlen variiert der CO2-Gehalt am Verbrennungsraumausgang (Boiler) zwischen 50 und 70 Vol %. Der Wasseranteil beträgt 16-25 Vol % und der überschüssige Sauerstoff ändert sich im Bereich von 2,5 und 4,5 Vol % [KAs-08-1][ KAs-08-2][BOI-09][CAU-09][STR-09]. Das gleiche Verbrennungsgas entsteht wahrend der druckgeladenen Wirbelschichtfeuerung mit reinem Sauerstoff [HON-09]. Für die Korrosionsuntersuchungen in dieser Arbeit wurde eine Gaszusammensetzung von 70 mol % Kohlendioxid und 30 mol % Wasserdampf genutzt. Ein Schaubild der von Vattenfall im September 2008 in Betrieb genommenen Oxyfuel-Pilotanlage ist in Abbildung 1-1 zu sehen. Wichtige Komponenten sind der gesamte Dampfkreislauf mit Dampfturbine, die Luftzerlegungsanlage zur Erzeugung von reinem Sauerstoff und der Kessel, in dem die eigentliche Verbrennung stattfindet, sowie die Entstaubung und Entschwefelung [VAT-08]. Eine weitere effiziente Technologie mit CO2-Abscheidung stellt der IGCC-Prozess (Integrated Gasification Combustion Cycle) dar. Er gehört zu den pre-combustion-Technologien, bei denen die Abscheidung des CO2 vor der Verbrennung stattfindet. An dieser Stelle sei auf die umfangreiche Literatur hingewiesen, in der IGCC-Prozesstechnik thematisiert wird. Die Entwicklung und die Eigenschaften der Werkstoffe spielen bei Erhöhung der Wirkungsgrade in Oxyfuel-Kraftwerken eine bedeutende Rolle, da sie erhöhten Dampfparametern und veränderten Rauchgaszusammensetzungen widerstehen müssen. Heute werden die Dampferzeugerrohre und Dampf führende Rohrleitungen in konventionellen Kohle befeuerten Dampfkraftwerken aus kriechfesten und korrosionsbeständigen Materialien gefertigt, die unter Kraftwerksbedingungen eine Lebensdauer von 100 000 h erreichen sollen [HAH-04][VIS-00][VIS-06][FUJ-92][ENN-07-2]. In Abhängigkeit von der Belastung werden für die verschiedenen Komponenten im Kraftwerk unterschiedliche Werkstoffe eingesetzt, welche optimiert für die anliegenden Bedingungen sind. Der Kessel (Verbrennungsraum) besteht aus einem Rohrsystem, die Membranwände genannt werden. Diese werden in mit Luft befeuerten Kraftwerken aus niedrig legierten Stahlen wie z.B. 13CrMo44 und T24 gefertigt. Sie werden maximal Temperaturen bis 525 °C ausgesetzt [ASM-96][VIS-00]. Innerhalb des Verbrennungsraumes sind Überhitzerrohre angeordnet, in denen Wasserdampf überhitzt und unter Druck gesetzt wird. Für Überhitzerrohre werden kriechresistente ferritisch-martensitische Stähle genutzt, welche sich durch eine hohe Festigkeit, hohe Bruchzähigkeit, Schweißbarkeit und im Vergleich zu austenitischen Stahlen geringen Wärmeausdehnungskoeffizienten auszeichnen [BEN- 02][VIS-00][VIS-06]. Die höchsten Einsatztemperaturen liegen für die ferritisch-martensitischen Stähle in Abhängigkeit ihrer Kriechfestigkeit heute bei maximal 620°C [VIS-00][VIS-06]. Typische Vertreter gehören zur Gruppe der hochwarmfesten Stahle 9-12 % Chrom-Stahle (z.B. X20CrMoV12-1, T91, T92) [BUR-06]. Die Anhebung der Dampfparameter Druck und Temperatur in Kombination mit der veränderten Rauchgaszusammensetzung im Oxyfuel-Kraftwerk haben einen unbekannten Einfluss auf die in Kraftwerken typischerweise eingesetzten kriech- und korrosionsresistenten Werkstoffe. In der vorliegenden Arbeit werden entsprechend den beschriebenen Bedingungen Temperaturen zwischen 500 und 650 °C, Drucke von 1, 30 und 80 bar und eine Gaszusammensetzung von 30 mol % H2O und 70 mol % CO2 auf verschiedene Stahle angewendet. Die Einflüsse der genannten Parameter sind Gegenstand dieser Arbeit. T3 - BAM Dissertationsreihe - 61 KW - CO2-capture KW - carburization KW - corrosion KW - steel KW - power plant KW - Carbon-dioxide-steam PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-978 SN - 978-3-9813550-4-8 SN - 1613-4249 VL - 61 SP - 1 EP - 189 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-97 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Manier, Charles-Alix T1 - Slip-rolling resistance of novel Zr(C,N) thin film coatings under high Hertzian contact pressures N2 - Heutzutage sind Beschichtungen in breiten technologischen Anwendungsfeldern von Dekorierungszwecken bis zur Verbesserung der Leistung von Werkzeugen in der Massenfertigung, von medizinischen Werkzeugen oder noch von Computer Bestandteilen und vielen Anderen verbreitet. Besonders rechnet die Automobilindustrie mit einem Leistungsgewinn bei der Verwendung von Dünnschichten in mechanischen Bauteilen des Antriebstranges und des Getriebes. Das auf einer kostengünstigen Alternative basierte Konzept ist die Leistungssteigerung durch Erhöhung der Tragfähigkeit durch Aufbringung von Dünnschichten, die zu zusätzlichen Eigenschaften beitragen könnten, ohne das Design der Bauteile grundlegend zu verändern. Es würde auch einen Weg in Richtung Downsizing darstellen. In der vorliegenden Arbeit ist eine kurz gefasste Literaturübersicht bezüglich der Wälzbeständigkeit von verschiedenen Dünnschichten zusammengestellt. Bei der Durchführung von Wälzversuchen sind kristalline Zr(C,N) Dünnschichten als wälzbeständig nachgewiesen worden und zwar bis zu einer mittleren Hertzschen Kontaktpressung von P0mitteln = 1,94 GPa (P0max = 2,91 GPa) bei 120°C in Erstbefüllungsmotoröl bis zu zehn Millionen Zyklen. Grundsätzlich stellt dieses Ergebnis hier eine Verdoppelung der auf die Oberfläche wirkenden Normalkraft gegenüber unbeschichteter Kontaktkonfiguration dar, die herkömmlich mit gebrauchsfertig formulierten Ölen (d.h. mit hohem Anteil an Additiven) geschmiert sind. Typischerweise bestehen die zu beschichtenden Substrate aus vergütetem Lagerstahl Cronidur 30. Die Zr(C,N) Dünnschichten sind mittels verschiedenen Untersuchungsmethoden charakterisiert worden, um die Ursachen festgestellter Ergebnisunterschiede bezüglich der Wälzbeständigkeit unter diesen hohen tribologischen Beanspruchungen zu klären. Die Wälzbeständigkeit verschiedener Beschichtungschargen ist mittels eines festgelegten, leistungsfähigen Prüfverfahrens evaluiert worden. Verschiedene Standzeitergebnisse sind zwischen den einzelnen Chargen erreicht worden, ohne wesentliche Änderungen bei den Abscheidungsprozessen vorzunehmen. Die durchgeführte Charakterisierung stellt mikrostrukturelle Unterschiede fest, die die Wälzbeständigkeit beeinflussen und als Ursache der Wälzverhaltensunterschiede der Zr(C,N) Dünnschichten sein können. Außerdem ist die Leistung der Zr(C,N) Dünnschicht nicht nur im Bezug auf die Steigerung der Wälzbeständigkeit sondern auch hinsichtlich des tribologischen Einflusses (u. a. Nachwirkungen auf den Verschleiß und die Reibung) bewertet worden. Darum wurden die tribologischen Ergebnisse mit den entsprechenden gemessenen Größen von unlängst entwickelten DLC-Dünnschichten (DLC, Diamond Like Carbon) verglichen, die auch bei der gleichen Prüfprozedur getestet worden sind und gleiche Überrollungszahlen erwiesen hatten. N2 - The present work was carried out within the framework of my four years activities as a scientific co-worker in the Working Group Tribological Optimization; Failure Analysis; Extreme Exposure in the division Tribology and Wear protection (VI.2) of the BAM Federal Institute for Materials Research and testing in Berlin, Germany and generously funded by the German Research Foundation (DFG WO521/6-1). First of all, I would like to express my sincere thanks to my supervisor Dr.-Ing. Mathias Woydt, head of the aforementioned working group, who gave me the opportunity to start my professional development, initiated and intensively supported this PhD work as well as accepted to take part in thesis committee. Prof. Dr. rer. nat. Walter Reimers, Chairman of the Institute for Materials Science and Technology of the Technical University of Berlin (TU Berlin), is also gratefully thanked for his interest in the thesis subject, for helpful comments and suggestions as well as for agreeing to participate in the referee of this work. I would like to thank also Prof. Dr.-Ing. Claudia Fleck, Chairman of the Material Engineering Department (Fachgebiet Werkstofftechnik) of the Technical University Berlin (TU Berlin), for assuming the chairmanship of the thesis committee. All the staff of the tribology division is also greatly acknowledged for bringing a pleasant working environment. Dr. Dirk Spaltmann is particularly thanked for the helpful discussions as well as for his assistance in English formulation. Dipl.-Ing. Manuel Reichelt and my bureau colleague Dr.-Ing. Géraldine Theiler will find here my many thanks for promoting constantly a good working atmosphere. Sigrid Binkowski and Dipl.-Ing. Norbert Kelling are also gratefully acknowledged for their constant and helpful technical support. André Otto is also thanked for his substantial administrative support. My sincere thanks go to Dr. rer. nat. (and “by the way” world and olympic champion in eights rowing) Ilona Dörfel (BAM V.1, Composition and Microstructure of Engineering Materials) for performing the highly relevant TEM investigations as also Heidemarie Rooch, and Ing. Wolfgang Gesatzke for the specific preparation of the samples. Furthermore, I greatly appreciate the contributions of Dr.-Ing. Vasile-Dan Hodoroaba, Birgid Strauß, Sigrid Benemann and Dipl.-Phys. Thomas Wirth (BAM VI.4) for their valuable contributions in microscopy analysis and to Dr.-Ing. Eric Wild (TU Berlin) for the substantial residual stress analysis of the coatings. Acknowledgement is also due to Dr. Thomas Chudoba from ASMEC GmbH for performing hardness measurements with his QCSM module. Thanks are surely extended to Fundación Tekniker, specifically Josu Goikoetxea and Dr. Javier Barriga for the manufacturing of the coatings in industrial deposition chambers and to the machining shop BAM Z.5 for the specimens preparation. Last, but by no means the least, I would like to thank all my friends for their support and to all the people who helped me directly or indirectly in my doctoral work and/or for my pleasant German adaptation. My very special thanks (du fond du coeur) go to my beloved parents Marie-Hélène (What is Tribology?) and Gérard (I miss you so much) and “of course” to my bright (and sometimes nerve-racking) sister Sophie, for everlasting encouragement and plenty of good advices in a wide range of domains. Ania, especially for your contribution in the decision of pursuing my “German experiment”. T3 - BAM Dissertationsreihe - 60 KW - Dünnschichte KW - multilayer KW - Wälzbeständigkeit KW - Zr(C, N) coating KW - Multilayer KW - PVD KW - Slip-rolling resistance PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-987 SN - 978-3-9813550-3-1 SN - 1613-4249 VL - 60 SP - 1 EP - 138 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-98 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Joshi, Ranjit Sharad T1 - Polymer surface modification using novel underwater plasma (UWP) technique N2 - Plasmachemische Methoden sind geeignet, um chemisch inerte Polyolefinoberflächen zu funktionalisieren. Meist entsteht jedoch dabei eine große Vielfalt verschiedener funktioneller Gruppen. Für Pfropfreaktionen an diesen Gruppen, aber auch für höherwertige Anwendungen ist die Existenz einer hochdicht mit einer einzigen Sorte funktioneller Gruppen versehenen Polymeroberfläche Voraussetzung. Dementsprechend sollte in dieser Arbeit versucht werden, einen solch einen selektiven Funktionalisierungsprozeß zu entwickeln, der möglichst nur eine Art funktioneller Gruppe in hoher Konzentration liefert. Innerhalb mehrerer neuentwickelter selektiver Plasmaprozesse erschien das Unterwasserplasma (UWP) besonders aus technischer Sicht zur Lösung dieses Problems geeignet. Das UWP ist Quelle von Ionen, Elektronen, UV-Strahlung, Schockwellen, Radikalen, wie Hydroxyl-, sowie reaktiven Neutralmolekülen, wie Wasserstoffperoxid, Wasserstoff und Sauerstoff. Das UWP und die nahverwandte Glimmentladungselektrolyse (GDE) stellen interessante neue Methoden für die Polymeroberflächenmodifizierung dar. Die Polymeroberfläche wird durch Wirken von Elektrochemie, Naßchemie, Plasma- und Strahlenchemie sowie durch Schockwellen umgestaltet. Das UWP ist naheliegenderweise besonders zur Polymeroberflächenmodifizierung mit OH-Gruppen geeignet. Es ist wegen der Art der Erzeugung (Kapillarentladung und Schockwellenerzeugung) ein strömungsbestimmtes Plasma. Je nach Entladungsbedingungen hatten die OH-Gruppen einen Anteil von 25-40% von allen durch das Plasma eingeführten sauerstoffhaltigen Gruppen. Dieser Anteil reicht nicht aus, um von einem selektiven Plasma zu sprechen, ist aber deutlich höher als bei der Modifzierung im Sauerstoffniederdruckplasma, wo weniger als 10% aller O-Funktionalitäten OH-Gruppen sind. Die genaue Bestimmung der OH- Gruppenkonzentration erfordert deren Derivatisierung mit Trifluoressigsäureanhydrid (TFAA), um über die Fluorbestimmung mit Photoelektronenspektroskopie (XPS) diese Konzentration berechnen zu können. Im Unterschied zu der etablierten Niederdruckplasmatechnik moderiert die Wasserphase im UWP die hochenergetischen Spezies sehr schnell auf ein energetisch niedriges Niveau, was den Energieeintrag und die damit verbundenen Veränderungen im Polymer begrenzt. Intensive Oxidation, starker Abbau, Vernetzung und Radikalbildung im Polymer werden weitgehend zurückgedrängt. Möglicherweise dennoch entstehende Abbauprodukte werden durch die umgebende Wasserphase sofort aufgelöst. Die Produktpalette an funktionellen Gruppen auf der im UWP modifizierten Polypropylenfolie beschränkt sich auf C-O-Spezies mit einer Sauerstoffeinfachbindung und wenigen mit zwei Sauerstoffbindungen. Ein weiterer interessanter Gesichtspunkt ist, dass eine Vielfalt an chemischen Additiven zum UWP zumischbar ist, wodurch sich die Reaktionsrichtung beeinflussen lässt. Wasserstoffperoxid- und Katalysatorzugabe (Fe-ZSM5) sollten die Reaktivität des UWP beeinflussen, indem die Konzentration der für die OH-Funktionalisierung verantwortlich gemachten OH-Radikale als Produkte der homolytischen Wasserstoffperoxiddissoziation erhöht wird. Der Katalysator beschleunigte die Gleichgewichtseinstellung zwischen OH- Gruppenbildung durch Dissoziation und Rekombination, was sich vor allem in einer erhöhten Oxidationsrate widerspiegelte. Entsprechend den analytischen Möglichkeiten der XPS konnten als Schnellbestimmung lediglich die Summe aller C-O einfach gebundenen Spezies gemessen werden, wie C-OH, C-O-C oder Hydroperoxide. Diese „C-O-Selektivität“ betrug im UWP 47 C-O/100 O-Atome und konnte durch Mitwirkung des Katalysators (Fe-ZSM5) auf 81 C-O/100 O-Atome verbessert werden, was zunächst einen bemerkenswerten Fortschritt darstellte. Die TFAA-Dervatisierung ergab jedoch, daß der Anteil an OH-Gruppen innerhalb der C-O-Spezies nicht erhöht werden konnte. Eine andere Möglichkeit bestand in der Erzeugung von Carboxylgruppen an der Polypropylenoberfläche. Dazu wurden Essigsäure, Acryl-, Malein- und Itaconsäure als Modifikatoren bzw. Monomere für die Polymerbildung eingesetzt. Die erwartete bevorzugte Bildung von COOH-Gruppen an der Polymeroberfläche war jedoch niedrig bei Einsatz polymerbildender Säuren. Diese Tatsache war nicht weiter verwunderlich, weil die gebildeten COOH- enthaltenden Polymere wasserlöslich sind. Nur die durch das UWP fragmentierten Monomere konnten eine im Wasser nicht lösliche Polymerabscheidung ergeben, die aber nur noch einen gewissen Bruchteil der ursprünglichen COOH-Gruppen besaß. Essigsäure muss diesen Fragmentierungsweg gehen, wobei gehofft wurde, dass überlebende COOH- Spezies an der Polypropylenoberfläche die gewünschten Säuregruppen in der vernetzten Schicht bilden würden. Die XPS wurde zur Identifizierung und Konzentrationsbestimmung der COOH(R)-Spezies benutzt. Zur zweifelsfreien Konzentrationsbestimmung wurde die Gasphasenderivatisierung mit Trifluorethanol eingesetzt. Eine wesentlich höhere COOH Ausbeute ergab der Einsatz von Acrylsäure in der GDE. N2 - Plasma chemical methods are well suited for introducing functional groups to the surface of chemically inert polymers such as polyolefins. However, a broad variety of functional groups is often formed. Unfortunately, for further chemical processing such as grafting of molecules for advanced applications a highly dense and monotype functionalized polyolefin surface is needed. Therefore, the main task was to develop a selective surface functionalization process, which forms preferably one type of functional groups at the surface in high and variable concentration. Amongst the novel plasma methods, the under-water plasma process (UWP) is one of most attractive to solve the problem of monotype functionalization. Such plasma is an efficient source of ions, electrons, UV-radiation, high frequency shock waves, radicals such as hydroxyl radical and reactive neutral molecules such as hydrogen peroxide, hydrogen and oxygen. It was found that underwater plasma and the closely related glow discharge electrolysis are interesting new methods for polymer surface functionalization. An effective modification into the topmost surface chemistry of polymer layer was observed by the collective effect of wet-chemistry, electrochemistry, atmospheric gas discharges, irradiation, and shock waves. Underwater capillary discharge was seen more effective in -OH functionalization and was largely seen as a flow dominated process because of the shock wave turbulences. Using such water-based plasma a fraction of 25-40% of all O-functional groups was produced as OH-groups in comparison to <10% OH produced in the oxygen low- pressure plasma. The exact concentration of the OH functionality was studied by TFAA gas phase derivatization and measuring the respective fluorine concentration by photoelectron spectroscopy (XPS). In contrast to established gas phase glow discharge processes, the water phase absorbs and therefore limits the particle and radiation energy and thus the energy input into the polymer. Extensive oxidation, degradation, cross-linking and radical formation in the polymer is more limited than under gas plasma exposure because of the liquid water environment, which moderates high energetic plasma species. The variety of plasma produced species in the water phase is also much smaller because of the limited reaction possibilities of the plasma with water. The possibility to admix a broad variety of chemical additives makes underwater plasma additionally highly attractive for the chemist. At last, the water removes all low-molecular weight oxidized products formed by plasma-induced polymer degradation. Hydrogen peroxide and the catalyst (Fe-ZSM5) should influence or increase the equilibrium concentration of OH radicals in the underwater process. It was supposed that these radicals play the most important role for OH functionalization of polyolefin surfaces. Hydrogen peroxide was believed to be the most prominent precursor for OH group formation in the UWP. The catalyst should modulate the steady state of OH group formation and recombination, and thus accelerate the functionalization. This was confirmed by an increased oxidation rate. Owing to the detection limit of XPS the C-O bond selectivity was defined as clearly resolvable subpeak within the C1s signal assigned to C-OH, C-O-C and other singly C-O bonded species. This bondamounts 47 C-O bonds/100 O atoms with pure UWP system and enhances to a maximum of the 81 C-O bonds/100 O atoms using the Fe-ZSM5 catalyst system. Therefore, this method exhibits a great progress for a start. However, after TFAA derivatization the fraction of desired OH groups could not be significantly increased. In the continuation acetic acid, acrylic acid, maleic and itaconic acid were used as additive monomers. The chemical selectivity in -COOH bond formation using bi-carboxylic additives was seen inferior. Acetic acid is not a chemically polymerizing monomer but it could polymerize by monomer/molecular fragmentation and recombination to a cross linked layer. The other monomers form preferably water-soluble polymers on a preferred chemical way. Only the fragmented fraction of these monomers could form an insoluble coating by cross linking to substrate. The XPS analysis was used to track the alterations in COO- bond percentage on the PP surface. To identify the -COOH groups on substrate surface unambiguously, which have survived the plasma polymerization process, the gas phase derivatization with trifluoroethanol was performed. A much higher yield in COOH groups was achieved using the glow discharge electrolysis and acrylic acid. T3 - BAM Dissertationsreihe - 59 KW - hydrogen peroxide KW - Feton-like processes KW - hydroperoxyl radicals KW - Polymer surface modification KW - polymer surface chemistry KW - underwater plasma KW - capillary discharge KW - selective monofunctional surface KW - hydroxyl fictionalization PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-993 SN - 978-3-9813550-2-4 SN - 1613-4249 VL - 59 SP - 1 EP - 145 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-99 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Jakobs, Desiree T1 - Mikrobieller Abbau eines im Holzschutz verwendeten metallorganischen Biozids im Boden N2 - Holz und eine Vielzahl von Holzschutzmitteln (HSM) werden im Bodenkontakt durch Eukaryonten und Prokaryonten bis zum Kohlenstoffdioxid abgebaut und zum Teil in mikrobielle Biomasse umgewandelt. Die Abbauprozesse eines HSMs, auf Basis von metallorganischem Kupfer-HDO, wurden im Rahmen dieser Arbeit durch die Verknüpfung chemischer und molekularbiologischer Techniken sowie 13C „Tracer“- Experimenten näher charakterisiert. Analysen mit sterilisiertem Boden ergaben, dass der Abbau von 13C- und 12C-Kupfer-HDO durch eine mikrobielle Gemeinschaft beschleunigt wurde. Durch Auswaschung aus geschütztem Holz können Teile des Biozids in geringen Konzentrationen in den Boden gelangen. Messungen der Biozidkonzentration mittels HPLC über die Zeit ergaben, dass das Kupfer-HDO innerhalb von wenigen Tagen im Boden abgebaut wurde. Ein Vergleich der Abbaugeschwindigkeiten zeigte, dass Kupfer-HDO als reines Biozid im Boden schneller abgebaut wird, als ein im Holz eingebetteter Bestandteil einer Holzschutzmittelformulierung. Die Analysen des respiratorisch entstandenen CO2, sowie der Veränderungen der mikrobiellen PLFA-Struktur in den Testansätzen mittels EA-IRMS- bzw. GC-C-IRMS erbrachten, dass das Kupfer-HDO sowohl anabolisch als auch katabolisch von der mikrobiellen Gemeinschaft metabolisiert wurde. Durch den Einsatz der SIP-PLFA-Technik wurde die mikrobielle Gemeinschaft charakterisiert. Mittels der Analyse des 13C-Werts in den PLFAs wurde nachgewiesen, dass der Abbau des Biozids hauptsächlich durch Gram negative Bakterien erfolgte. In den nur in geringem Maße vorhandenen Signaturfettsäuren von Pilzen und anderen Eukaryonten konnte demgegenüber keine Veränderung des 13C-Werts festgestellt werden. Dies deutet darauf hin, dass die Eukaryonten nicht am Abbau des Kupfer-HDOs beteiligt waren. Um die mikrobielle Sukzession in Bezug auf HSM zu charakterisieren, wurde die Zusammensetzung der mikrobiellen Lebensgemeinschaft auf der Oberfläche von Kupfer-HDO- und Kupfer-Amin-behandelten sowie unbehandelten Holzprüfkörpern im Bodenkontakt bestimmt. Zur Aufklärung der Bedeutung des Co- Biozids HDO für die mikrobielle Lebensgemeinschaft am Holz wurde dies durch ein anderes Amin ersetzt und unter der Bezeichnung Kupfer-Amin-HSM in den Untersuchungen eingesetzt. Mit Hilfe des Fingerabdruckverfahrens T-RFLP wurde die Zusammensetzung der bakteriellen Gemeinschaftsstruktur charakterisiert. In einem Ordinatensystem wurden die Veränderungen der bakteriellen Gemeinschaftsstruktur hinsichtlich der Faktoren Inkubationszeit und HSM visualisiert. Die statistische Auswertung der Datensätze ergab, dass sich die bakterielle Gemeinschaftstruktur zwischen dem Kupfer-Amin-basierten HSM signifikant von dem Kupfer-HDO-basierten HSM unterschieden. Im Verlauf der Inkubationszeit konnten in den einzelnen Testansätzen keine statistisch signifikanten Unterschiede detektiert werden. Die Gemeinschaftsstruktur der Eukaryonten wurde mittels des SSCP-Fingerabdruckverfahrens charakterisiert. Dazu wurde die DNA von abundanten operativen taxonomischen Einheiten (OTUs), welche sich über die Zeit und im Bezug auf die verschiedenen HSM besonders stark änderten, aus den Banden in den SSCP-Gelen isoliert, kloniert und sequenziert. Entgegen den Erwartungen, unter den Eukaryonten am Holz und im angrenzenden Boden eine große Anzahl an Pilzen detektieren zu können, zeigte sich, dass nur drei Pilze an der Sukzession der eukaryontischen Gemeinschaft von Bedeutung waren. So wurde der Weißfäule erregende Basidiomycet Sphaerobolus stellatus vor allem an den H2O-behandelten Kontrollprüfkörpern nachgewiesen. Auch der Moderfäule erregende Ascomycet Lecytophora multabilis wurde vermehrt in den Kontrollen nachgewiesen. Die eukaryontische Gemeinschaft wurde von unterschiedlichen Phyla, wie Alveolata, Disicicrista, Amoebozoa, Arthropoda oder Nematoda dominiert. Von keinem dieser Organismen war aus der Literatur bekannt, dass er in der Lage ist, Holz, HSM oder einzelne Bestandteile von HSM zu metabolisieren. Diese Organismen ernähren sich in der Mehrzahl bakterivor. Dies deutet darauf hin, dass sie weniger das Kupfer- HDO abbauen, als vielmehr den Bakterienrasen beweiden, der sich auf der Oberfläche des Holzes angesiedelt hat. Mit der vorliegenden Arbeit konnte erstmals eine direkte Verbindung zwischen Organismengruppen und dem Abbau des metallorganischen Biozids Kupfer-HDO hergestellt werden. Zusätzlich wurden die zeitlichen Veränderungen der mikrobiellen Lebensgemeinschaft in Abhängigkeit von Kupfer-HDO charakterisiert. T3 - BAM Dissertationsreihe - 58 KW - mikrobielle Sukzession KW - phospholipid fatty acis (PLFA) KW - Holzschutzmittel KW - Biozidabbau KW - Kupfer-HDO (N cyclohexyl-diazeniumdioxy-)Kupfer) PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1000 SN - 978-3-9813346-9-2 SN - 1613-4249 VL - 58 SP - 1 EP - 169 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-100 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - zadeh, Hamid Naghib T1 - Niedrig-sinternde Kondensatorwerkstoffe auf der Basis von Bariumtitanat N2 - Das Hauptziel dieser Arbeit bestand in der Entwicklung neuer Bariumtitanat-Kondensatorwerkstoffe, die bereits bei 900°C dichtsintern, eine hohe Dielektrizitätskonstante mit geringer Temperaturabhängigkeit sowie geringe dielektrische Verluste und eine hohe Durchschlagfestigkeit aufweisen. Um die Sintertemperatur von Bariumtitanatpulver von ca. 1300 °C auf 900 °C herabzusetzen, wurden Additivkombinationen entwickelt. Es wurden hierfür verschiedene Additive ausgewählt und eine große Anzahl von Versätzen unter Verwendung eines kommerziell erhältlichen BaTiO3-Pulvers aufbereitet, zu Zylindern verpresst und gesintert. Als besonders geeignet haben sich Li-haltige Sinteradditivkombinationen herausgestellt. Durch Zugabe von 2 bis 3 Ma.-% einer Additivkombination aus (LiF-SrCO3), (SrO-B2O3-Li2O) oder (ZnO-B2O3-Li2O) verdichtet das Bariumtitanat bereits bei Temperaturen von 900°C auf mehr als 95 % der Reindichte. Die gesinterten Kondensatorwerkstoffe weisen hohe Dielektrizitätskonstanten zwischen 1800 und 3590 auf. Für eine geringe Temperaturabhängigkeit der Dielektrizitätskonstante ist die Bildung von core-shell Strukturen in einem feinkörnigen (mittlere Korngröße ≤ 1 μm) und homogenen Gefüge erforderlich. Bei der BaTiO3-Probe mit 2 Ma.-% (LiF-SrCO3)-Additivsystem ist die Temperaturabhängigkeit der Dielektrizitätskonstante relativ gering. Die Kapazitätsänderung im Temperaturbereich zwischen 0 °C und +80 °C ist kleiner als ±15 %. Die für die geringe Temperaturabhängigkeit der Dielektrizitätskonstante notwendige Bildung von core-shell- Strukturen in einem feinkörnigen und homogenen Gefüge dieser Probe wurde durch TEM/EDX-Untersuchungen nachgewiesen. Die deutlich größere Temperaturabhängigkeit der Dielektrizitätskonstante bei BaTiO3- Werkstoffen mit (SrO-B2O3-Li2O)-Additiven resultiert aus dem starken Kornwachstums während des Sinterns. Zur Verringerung wurden ergänzend (Nb2O5-Co2O3)-Additive zugesetzt. Durch Zugabe von 1,5 Ma.-% (Nb2O5-Co2O3) konnte die Temperaturstabilität der Dielektrizitätskonstante erheblich verbessert werden, weil das starke Kornwachstum während des Sinterns gehemmt und core-shell-Strukturen gebildet wurden. Die BaTiO3-Werkstoffe mit (ZnO-B2O3- Li2O)-Additiven besitzen ein feinkörniges Gefüge, weswegen die Temperaturabhängigkeit der Dielektrizitätskonstante von vornherein relativ gering ist. Trotzdem wurde auch hier der Einfluss des (Nb2O5-Co2O3)-Zusatzes auf die dielektrischen Eigenschaften untersucht. Die BaTiO3-Probe mit (ZnO- B2O3-Li2O-Nb2O5-Co2O3)-Additiven weist eine hohe Dielektrizitätskonstante von 2370 auf. Der Nb2O5- Co2O3- Zusatz führte allerdings nicht zu weiterer Absenkung der Temperaturabhängigkeit der Dielektrizitätskonstante, da hier während des Sinterns ein starkes Kornwachstum stattfand. Um dieses zu reduzieren, wurden die Masseanteile der ZnO-B2O3-Li2O-Additivkomponente modifiziert. Eine Erhöhung des B2O3-Gehalts bzw. eine Reduzierung des Li2O- und ZnOGehalts im ZnO-B2O3-Li2O-Additivsystem verbessert durch das Verhindern eines starken Kornwachstums beim Sintern die Temperaturstabilität der Dielektrizitätskonstante (Kapazitätsänderung von < ±15 % im gemessenen Temperaturbereich zwischen -40 °C und +125 °C), senkt aber gleichzeitig die Dielektrizitätskonstante selbst auf 1280. Auch hier zeigten TEM/REM-Untersuchungen das entstandene homogene und feinkörnige Gefüge mit core-shell Strukturen. Während die Zugabe der ZnO-B2O3-Li2O-Additive im Allgemeinen in kristalliner Form erfolgte, wurden sie zum Vergleich auch als Glaspulver zugesetzt. Der BaTiO3-Werkstoff mit ZnO-B2O3-Li2O-Glas und Nb2O5-Co2O3-Zusätzen weist im Vergleich zu anderen (ZnOB2O3-Li2O-Nb2O5-Co2O3)-haltigen BaTiO3-Werkstoffen eine geringere Dielektrizitätskonstante von 1110 auf. Die Temperaturabhängigkeit der Dielektrizitätskonstante ist jedoch sehr gering. Die Kapazitätsänderung im gemessenen Temperaturbereich zwischen – 20 °C und +125 °C ist kleiner als ±10 %. Aufbauend auf die neuentwickelten LTCC-kompatiblen Kondensatorwerkstoffe bestand ein weiteres Ziel dieser Arbeit in der Herstellung von keramischen Folien aus den neuen Werkstoffen und der Integration dieser Folien in Multikomponenten-LTCC-Module, d. h. einer Kombination mit ferritischen Folien und Folien mit niedriger Permittivität (Basis-LTCC). Es wurden aus fünf ausgewählten Kondensatorwerkstoffen Folien und Laminate hergestellt. Die gesinterten Laminate weisen aufgrund geringer Porosität wesentlich höhere Dielektrizitätskonstanten von 1220 bis 3350 und geringere dielektrische Verluste von 0,008 bis 0,024 im Vergleich zu den gesinterten Presslingen auf. Das Temperaturverhalten der Dielektrizitätskonstante der über das Foliengießen hergestellten Werkstoffe unterscheidet sich nur sehr geringfügig vom Temperaturverhalten der trockengepressten Proben. Aufgrund sehr geringer Kapazitätsschwankungen im Frequenzbereich zwischen 1 kHz und 1 MHz können alle fünf Kondensatorwerkstoffe in diesem Frequenzbereich eingesetzt werden. Außerdem weisen die Kondensatorfolien (mit Ausnahme der Probe BAM-18.6) hohe Durchschlagfestigkeiten deutlich oberhalb von 20 kV/mm auf. Um ein fehlerfreies Co-firing der niedrig sinternden Kondensatorfolien in Kombination mit LTCC- Basisfolien zu ermöglichen, wurden der thermische Ausdehnungskoeffizient und das Sinterverhalten des Basiswerkstoffs an die Eigenschaften des Kondensatorwerkstoffs angepasst. Kondensatorfolien mit auflaminierten Außenlagen aus den an der BAM entwickelten Basisfolien konnten im Co-firing Prozess ausreichend verdichten und erzielten dielektrische Parameter vergleichbar denen vom separat gesinterten Kondensatorwerkstoff. Damit ist die Voraussetzung für den Einsatz der neuen Werkstoffe in keramischen Multilayermodulen gegeben. Es wurde versucht, Multikomponenten- Laminate aus Ferritfolie, Basisfolie und Kondensatorfolie mit unterschiedlichem Schwindungsverhalten herzustellen. Dies gelang jedoch nur unter Ausübung eines uniaxialen Drucks von 1,5 MPa während des Co-firings. Aufgrund unterschiedlicher Ausdehnungskoeffizienten der verschiedenen Komponenten konnte ein völlig fehlerfreies Multikomponenten-Modul nicht hergestellt werden. Anordnung und Größe der Gefügefehler wie Risse werden durch die Anordnung der verschiedenen Folientypen im Laminat bestimmt. Günstig im Hinblick auf eine Minimierung der Gefügefehler ist es, die Kondensatorfolien, die den größten Ausdehnungskoeffizienten aufweisen, in der Mitte des Laminats anzuordnen. Die im Rahmen dieser Arbeit erzielten Ergebnisse sind für die Integration passiver Bauelemente in kompakte LTCC-Module und die weitere Miniaturisierung elektronischer Bauteile auf Multilayerbasis von großem Nutzen. Die neuen niedrig sinternden hochdielektrischen Kondensatormaterialien können sowohl als Folie als auch als siebdruckfähige Pasten zur Integration von Kondensatoren in LTCC-Module verwendet werden. T3 - BAM Dissertationsreihe - 68 KW - LTCC KW - Kondensatoren KW - Bariumtitanat KW - Co-firing PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-908 SN - 978-3-9813853-2-8 SN - 1613-4249 VL - 68 SP - 1 EP - 133 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-90 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Winkler, Helmut T1 - Über mechanische Eigenschaften von normalfestem und hochfestem Beton unter besonderer Berücksichtigung des Elastizitätsmoduls N2 - Alle mechanischen Eigenschaften haben direkt oder auch indirekt mit Spannungen und Verformungen zu tun. Die Kenntnis der elastischen Eigenschaften spielt deshalb eine sehr gewichtige Rolle. Diese lassen sich mit Hilfe verschiedener Kennwerte beschreiben. Der wichtigste unter ihnen ist der Elastizitätsmodul, den es in Kurzzeitversuchen an vorbereiteten Probekörpern festzustellen gilt. Im vorliegenden Bericht wird neben der Art der Versuchsdurchführung auf die teilweise sehr unterschiedlichen Bestimmungsmethoden zur Ermittlung des Elastizitätsmoduls von normalfestem und hochfestem Beton (C90/105) hingewiesen. Unterschiedliche Einflussfaktoren können das Ergebnis der Prüfung mehr oder weniger bedeutend verändern. Diese gestalten den Weg zu einer zuverlässigen Ermittlung sehr steinig. Alle europäischen Prüfungsvorschriften sehen eine mehrmalige Beanspruchung vor, bevor die Verformungen zur Berechnung des Elastizitätsmoduls aufgezeichnet werden. Die wiederholte Beanspruchung erfolgt in der Absicht, ein stabiles und plausibles Ergebnis zu erhalten. Doch oft sind die erzielten Werte nicht vergleichbar, denn die Ergebnisse verschiedener Prüfstellen können auch bei gleichem Prüfmaterial weit auseinander liegen. Die Ursachen dafür sind vielfältig. Im Beitrag wird auf einige Einflussfaktoren eingegangen. Vom Einfluss bei der Prüfung über die Mischungszusammensetzung und die Lagerungsart nach der Herstellung der Probekörper bis hin zur zeitabhängigen Festigkeits- und Verformungsentwicklung kommen noch weitere auf das Ergebnis Einfluss nehmende Parameter zur Sprache. Immer geht es um Veränderungen des Elastizitätsmoduls. Dabei stellt sich die Frage, ob wegen relativ aufwändiger Versuchsdurchführung und dennoch großer Versuchsstreuung die Art der Elastizitätsmodulprüfung nach DIN zwingend erforderlich ist. Im Lichte der gewonnenen Erkenntnisse lässt sich verdeutlichen, dass durchaus eine Berechtigung besteht, den Sehnenmodul, – die Steigung der Verbindungsgeraden von zwei Punkten der Spannungs-Dehnungslinie – als Kenngröße zu verwenden, ohne dass häufige Vorbeanspruchungen und Haltezeiten notwendig werden. Die Auswertung bestätigt, dass eine einmalige Vorbeanspruchung bis etwa zur Hälfte der erwarteten Bruchspannung ausreicht, um die zweite Beanspruchung zur Kennwertbestimmung zu verwenden. Diese kann zügig bis zum Versagen geführt werden ohne dass die Ergebnisse ungenauer werden als nach der DIN-Vorschrift, zumal keiner zu sagen vermag, welcher Versuch „richtige“ bzw. „gute“ Ergebnisse liefert. Die erste Beanspruchung unterdrückt weitgehend die viskosen Verformungen, so dass sich aus der zweiten Spannungs-Dehnungslinie der Sehnenmodul abgreifen lässt. Bei dieser Prüfungsmethode entfielen auch die zusätzlichen Druckversuche, die nach DIN für die vorherige Bestimmung der Beanspruchungshöhe erforderlich sind. In zahlreichen Versuchen an normalfesten und hochfesten Betonen werden Ergebnisse verschiedener Bestimmungs- und Messmethoden verglichen. Neben dem im statischen Versuch ermittelten Elastizitätsmodul wird die zeitliche Entwicklung eines hochfesten Betons bis zum Alter von fast zwölf Jahren mit der Bestimmung des dynamischen Elastizitätsmoduls verfolgt und dem statischen Elastizitätsmodul gegenüber gestellt. Darüber hinaus wurden an zahlreichen Probekörpern die Querdehnung und die Querkontraktionszahl ermittelt. In Schwingversuchen konnten an hochfesten Betonzylindern durch Aufzeichnung der Spannungen und Dehnungen mit Hilfe des Sehnenmoduls die Steifigkeitsänderungen und damit die Schädigung beurteilt werden. Schließlich wird nicht nur der elastische Bereich bei einer Druckbeanspruchung betrachtet, sondern auch vollständige Spannungs- Dehnungslinien von Normalbeton und hochfestem Beton präsentiert. T3 - BAM Forschungsberichtreihe - 288 PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1635 SN - 978-3-9813346-2-3 SN - 0938-5533 VL - 288 SP - 1 EP - 103 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-163 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Weltschev, Margit A1 - Niebergall, Ute A1 - Haufe, Manuela A1 - Heyer, Martina T1 - Vergleich der Materialeigenschaften von Polyethylenformstoffen und der Baumusterprüfungen von Gefahrgutverpackungen in Abhängigkeit von der Vorlagerungsdauer mit 55 %-iger Salpetersäure N2 - Die zum Vergleich der Polyethylenformstoffe für eine Bauart in der DIN EN 15507: 2009 – Verpackung – Verpackungen zur Beförderung gefährlicher Güter – Vergleichende Werkstoffprüfung von Polyethylensorten ausgewählten Materialkennwerte Schmelze-Masse-Fließrate MFR, Dichte D, Kerbschlagzähigkeit acN bei -30 °C, Spannungsrissbeständigkeit FNCT (full notch creep test) und Beständigkeit gegen oxidativen Abbau Ox (bestimmt durch den prozentualen Anstieg der MFR in 55 %-iger Salpetersäure) stehen in einer systematischen Beziehung mit Baumusterprüfungen. So stehen die mit Prüfkörpern aus gepressten Platten bestimmte Kerbschlagzähigkeit acN bei -30 °C und die Beständigkeit gegen oxidativen Abbau der Polyethylenformstoffe in einem Zusammenhang mit den Fallprüfungen der Baumuster aus diesen Formstoffen bei -18 °C, wobei die Baumuster einer 21-tägigen Vorlagerung mit der Standardflüssigkeit 55 %-ige Salpetersäure bei 40 °C unterzogen werden. Untersuchungen in der Dissertation zum Thema: Vergleich der Materialkennwerte von Formstoffen aus Polyethylen hoher Dichte mit dem Baumusterverhalten von Gefahrgutverpackungen haben gezeigt, dass bei 21-tägiger Vorlagerung der Baumuster mit 55 %-iger Salpetersäure die Grenzfallhöhen ansteigen, anstatt zu sinken. Zur Bestätigung und Erweiterung dieser Untersuchungsergebnisse wurden die Abhängigkeit der Grenzfallhöhen in den Fallprüfungen bei -18 °C, der MFR sowie der Zugeigenschaften Zugfestigkeit, Bruchdehnung und E-Modul von der Dauer der Vorlagerung mit 55 %-iger Salpetersäure bei 40 °C und 23 °C untersucht. Verpackungsbaumuster aus drei Formstoffen verschiedener Hersteller wurden mit 55 %-iger Salpetersäure 21, 42 und 84 Tage bei 40 °C sowie 6 Monate bei 23 °C vorgelagert. Die MFR und die Zugeigenschaften wurden von Kanisterwandausschnitten bestimmt. In Fallprüfungen bei -18 °C wurden die Grenzfallhöhen der Baumuster ermittelt. Die Werte der Kerbschlagzähigkeit bei -30 °C der Formstoffe stehen nicht im Zusammenhang mit den in den Kältefallprüfungen ermittelten Grenzfallhöhen. Die Grenzfallhöhen der nicht vorgelagerten Kanister aus den Formstoffen mit niedrigerer Kerbschlagzähigkeit sind höher im Vergleich zum Formstoff mit höherer Kerbschlagzähigkeit. Der oxidativ schädigende Einfluss der Salpetersäure wirkt sich in höherem Maße bei dem Formstoff mit der niedrigeren Beständigkeit gegen oxidativen Abbau in einer stärkeren Reduzierung der Grenzfallhöhen mit zunehmender Vorlagerungsdauer aus. Die 21-tägige Vorlagerung mit 55 %-iger Salpetersäure bei 40 °C bewirkte bei den Kanistern aus Formstoffen mit höherer Beständigkeit gegen oxidativen Abbau eine Erhöhung der Grenzfallhöhe in den Kältefallprüfungen. Mit Erhöhung der Vorlagerungszeit der Kanister auf 42 und 84 Tage wurden auch die Grenzfallhöhen der Kanister aus diesen Formstoffen aufgrund der mit dem längeren Zeitraum der Einwirkung verbundenen stärkeren oxidativen Schädigung durch die Salpetersäure reduziert. Die Grenzfallhöhe der Kanister aus dem Formstoff mit der niedrigeren Beständigkeit gegen oxidativen Abbau wurde dagegen durch die 21-tägige Vorlagerung erniedrigt und stieg mit zunehmender Vorlagerungsdauer wieder an. Der Formstoff wurde durch die Einwirkung der Salpetersäure über einen längeren Zeitraum elastisch. Gemäß DIN EN ISO 16101 ist die oxidativ schädigende Wirkung der 55 %-igen Salpetersäure über einen Zeitraum von 21 Tagen bei 40 °C mit der oxidativ schädigenden Wirkung der 55 %-igen Salpetersäure innerhalb von 180 Tagen (6 Monaten) bei 23 °C zu vergleichen. Der Vergleich der Grenzfallhöhen der Kanister und der MFR von Wandausschnitten aus diesen Kanistern nach 21-tägiger Vorlagerung bei 40 °C und nach der sechsmonatigen Vorlagerung bei 23 °C zeigte, dass die oxidative Schädigung der Polyethylenformstoffe nach sechs Monaten Vorlagerung bei 23 °C stärker im Vergleich zur 21-tägigen Vorlagerung bei 40 °C ist. Die Messergebnisse zeigten deutlich, dass die sechsmonatige Vorlagerung der Kanister bei 23 °C einen höheren Anstieg der MFR und niedrigere Grenzfallhöhen der Kanister in den Kältefallprüfungen im Vergleich zur 21-tägigen Vorlagerung der Kanister bei 40 °C bewirkte. Als Folge der Diffusion von Salpetersäure in die Polyethylenformstoffe und ihrer Reaktion mit dem Polymeren verändern sich die mechanischen Eigenschaften. Die prozentualen Werte der Abnahme bzw. Zunahme der Zugfestigkeit und der Bruchdehnung von Probekörpern aus der Seitenwand der Baumuster nach unterschiedlichen Vorlagerungszeiten stehen nur teilweise mit den Grenzfallhöhen der Kanister in den Kältefallprüfungen im Zusammenhang. Bemerkenswert ist, dass beim Vergleich der Zugfestigkeit und der Bruchdehnung des Formstoffes mit einer hohen Beständigkeit gegen oxidativen Abbau mit den Grenzfallhöhen der Kanister aus diesem Formstoff diese Materialkennwerte mit zunehmender Vorlagerungsdauer ansteigen, aber die Grenzfallhöhe nur nach der 21-tägigen Vorlagerung ansteigt und anschließend mit zunehmender Vorlagerungsdauer abfällt. Zugfestigkeit und Bruchdehnung der Probekörper aus dem Formstoff mit der geringeren Beständigkeit gegen oxidativen Abbau sinken in Analogie zu den Grenzfallhöhen mit steigender Vorlagerungsdauer der Kanister mit der Säure. Der Vergleich der Werte des E-Moduls mit den Grenzfallhöhen zeigte, dass bei den Kanistern aus dem Formstoff mit der niedrigeren Beständigkeit gegen oxidativen Abbau sich E-Modul und Grenzfallhöhe analog verhalten. Mit zunehmender Vorlagerungsdauer der Kanister steigen der E-Modul und die Grenzfallhöhen in den Kältefallprüfungen an. Die, durch die Einwirkung der Salpetersäure, entstandenen Eigenspannungszustände sind die Ursache für den ansteigenden E- Modul der Probekörper aus diesen Formstoffen. Bei den Probekörpern von Kanistern aus dem Formstoff mit der höheren Beständigkeit gegen oxidativen Abbau wurde ein markanter Abfall des E-Moduls nach 21-tägiger Vorlagerung der Kanister gemessen. Der E-Modul sinkt noch geringfügig nach der 42-tägigen Vorlagerung und steigt mit zunehmender Vorlagerungsdauer dagegen wieder an. Die Grenzfallhöhen verhalten sich erwartungsgemäß gegenläufig. T3 - BAM Forschungsberichtreihe - 293 PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1580 SN - 978-3-9813853-3-5 SN - 0938-5533 VL - 293 SP - 1 EP - 25 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-158 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Grunewald, Thomas A1 - Finke, Robert A1 - Grätz, Rainer T1 - Untersuchungen zur Zündwahrscheinlichkeit und Datenanalyse zur Erfassung der Einflussgrößen mechanisch erzeugter Stahl-Schlagfunken in explosionsfähigen Brenngas/Luft-Gemischen T1 - Investigations into the probability of ignition and data analysis to record the mechanical influencing variables generated steel impact sparks in explosive fuel gas/air mixtures N2 - Mechanisch erzeugte Schlagfunken stellen in explosionsgefährdeten Bereichen eine potentielle Zündquelle dar. Eine Vielzahl von mechanischen und reaktionskinetischen Einflüssen verursacht dabei eine komplexe Interaktion von Parametern, von deren Auswirkung auf die Zündwahrscheinlichkeit bislang wenig bekannt ist. Die statistisch erfassten Eigenschaften von Schlagfunken in dieser Untersuchung lassen auf stochastische Prozesse schließen, bei denen die Anzahl der durch einen Schlagprozess abgetrennten Partikel und deren Oxidationsverhalten sowie die Höhe der kinetischen Schlagenergie entscheidenden Einfluss auf die Zündwahrscheinlichkeit hat. Statistisch belastbar konnte in Ergänzung zum BAM Forschungsbericht 279 durch empirische Untersuchungen erstmals die Zündwahrscheinlichkeit von mechanisch erzeugten Stahl-Schlagfunken mit der Werkstoffpaarung unlegierter Stahl/unlegierten Stahl von W = 3 Nm bis 277 Nm ermittelt werden. Ferner wurde die Zündfähigkeit von durch energiereiche Schlagvorgänge (≥ 190 Nm) abgetrennten nicht oxidierten Partikeln erhöhter Temperatur in überstöchiometrischen Gemischen nachgewiesen. Während eine eindeutige Korrelation von Schlagenergie und Zündwahrscheinlichkeit sowie eine Korrelation von Schlagenergie und Anzahl abgetrennter Partikel festgestellt wurden, lieferte die Untersuchung in Hinblick auf die gemessenen einzelnen Parameter (wie z. B. Anzahl, Größe, Geschwindigkeit, mögliche Oxidation und Oxidationszeit und –verhalten der Partikel im Zusammenhang zur Schlagenergie und zur Zündwahrscheinlichkeit) kein eindeutiges Ergebnis. Auch eine Hauptkomponentenanalyse (PCA), die die Interaktion der einzelnen Parameter berücksichtigt, konnte keine spezifische Kombination messbarer Eigenschaften der Partikel finden, die mit einer deutlichen Erhöhung der Zündwahrscheinlichkeit korreliert. N2 - Mechanically generated impact sparks are a potential ignition source in explosive atmospheres. A great number of mechanical and procedural chemical reactions are the reason of a complex interaction of the influencing variables. The influence of the ignition probability is only little known. The summary of the statistically collected characteristics of mechanically generated impact sparks is a stochastic process, but the number and the oxidizing characteristic of the separated particles and the amount of the kinetic impact energy are the important influence of the ignition probability. Empirical studies and the review to the BAM science report 279 represent for the first time and statistically firm the ignition probability of mechanically generated impact sparks for homogeneous ferritic steel pairing in the impact range from W = 3 Nm to 277 Nm. Furthermore it shows the ignition probability from separated not oxidized but increased temperature sparks generated through high- energy impacts (≥ 190 Nm) in hyperstoichiometric air/gas-mixture. Whereas the study clearly shows a correlation between impact energy and ignition probability and between impact energy and number of separated particles, it doesn’t statistically clearly show a correlation between impact energy and individual values (like number, dimensions, possible oxidizing process, oxidizing time an oxidizing characteristics). Also a realized Principal Component Analysis (PCA) taking into account the interaction between the summary of the number of influencing variables, shows no specific combination of measurable properties of the particles correlating with a significant increase of the ignition probability. T3 - BAM Forschungsberichtreihe - 292 KW - Mechanisch erzeugte Funken KW - Schlagfunken KW - Stahl-Schlagfunken KW - Schlagvorgang KW - Schlagversuche KW - Partikel KW - Explosionsfähige Gasgemische KW - Werkstoffe KW - Zündgefahr KW - Zündquellen KW - Zündwahrscheinlichkeit KW - Mechanically generated sparks KW - Impact sparks KW - Impacts KW - Particles KW - Explosive atmosphere KW - Ignition hazard KW - Ignition source KW - Ignition probability PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1595 SN - 978-3-9813853-0-4 SN - 0938-5533 VL - 292 SP - 1 EP - 64 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-159 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Schoßig, Jörg A1 - Berger, Anka A1 - Malow, Marcus A1 - Krause, Ulrich T1 - Beurteilung und Verhinderung von Selbstentzündung und Brandgasemission bei der Lagerung von Massenschüttgütern und Deponiestoffen N2 - Im Ergebnis des Vorhabens steht für die praktische Anwendung eine wissenschaftlich fundierte Methode der Gefahrenbewertung für Selbstentzündungsvorgänge bei der Lagerung von Massenschüttgütern, Deponiestoffen und Recyclingmaterialien zur Verfügung. Diese Methode besteht aus drei Bestandteilen: - Experimentelle Bestimmung der relevanten physiko-chemischen Eigenschaften des Materials, - Experimentelle Bestimmung des Reaktionsverhalten mittels thermischer Analyseverfahren, - Vorhersage der Selbstentzündung und des Brandverlaufes durch numerische Simulation anhand der realen Geometrie der Lageranordnung. Eine solche Methode wurde bisher nicht systematisch angewendet, weshalb sowohl bei der Erstellung von Brandschutzkonzepten durch die Betreiber von Deponien oder Recyclinglagern als auch bei der Genehmigung solcher Anlagen durch die Behörden große Unsicherheit bezüglich des vorbeugenden Brandschutzes bestehen. Diese Unsicherheiten können mit den Ergebnissen des Vorhabens ausgeräumt werden. Den Nutzen hieraus ziehen vor allem KMU, die den Hauptteil der Betreiberfirmen von Deponien und Recyclinglagern stellen. Darüber hinaus erwuchsen aus dem Vorhaben auch grundlegende Erkenntnisse zum thermischen und Reaktionsverhalten solcher Lager: - Gemische von Kunststoffen mit zellulosehaltigen oder faserartigen Stoffen sowie Gemische von Kunststoffen mit inerten Stoffen zeigen eine stärkere Selbstentzündungsgefahr als reine Kunststoffe. - Auch bei sehr geringen Anteilen brennbarer Stoffe kommt es noch zu gefährlicher Wärmefreisetzung. - Bei heterogener Verteilung der brennbaren Komponente (brennbare Einschlüsse in nicht-brennbarem Material) kann eine „Übertragung“ der Zündung zwischen brennbaren Einschlüssen erfolgen. Dies spiegelt z.B. die Situation in Lagern für Baumischabfälle wieder. Mit dem im Vorhaben entwickelten mathematischen Modell können Selbstentzündungsprozesse in beliebigen Lageranordnungen vorhergesagt werden. Die Ziele des Vorhabens wurden erreicht. Weiterer Forschungsbedarf wurde zu folgenden Teilaspekten erkannt: - Selbstentzündungsverhalten von Abfällen, die als sogenannte Ersatzbrennstoffe aufbereitet werden (Pressballen mit und ohne Folieumwicklung), - tiefer gehende Klärung der Reaktionsmechanismen beim Abbrand von Abfallgemischen. T3 - BAM Forschungsberichtreihe - 291 PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1600 SN - 978-3-9813346-6-1 SN - 0938-5533 VL - 291 SP - 1 EP - 56 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-160 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 40, Heft 4 T3 - Amts- und Mitteilungsblatt der BAM - 4/2010 PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-172 SN - 0340-7551 VL - 40 IS - 4 SP - 1 EP - 59 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-17 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 40, Heft 3 T3 - Amts- und Mitteilungsblatt der BAM - 3/2010 PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-183 SN - 0340-7551 VL - 40 IS - 3 SP - 1 EP - 293 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-18 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 40, Heft 2 T3 - Amts- und Mitteilungsblatt der BAM - 2/2010 PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-190 SN - 0340-7551 VL - 40 IS - 2 SP - 1 EP - 381 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-19 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 40, Heft 1 T3 - Amts- und Mitteilungsblatt der BAM - 1/2010 PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-208 SN - 0340-7551 VL - 40 IS - 1 SP - 1 EP - 127 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-20 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Marzok, Ulrich A1 - Müller, Ralf A1 - Krauhausen, M. A1 - Burgstedt, F. A1 - Brode, W. T1 - Hochtemperatur shape screening keramischer Bauteile KW - Keramikherstellung KW - Sintern KW - Formmessung KW - Kontur KW - Lasermesstechnik PY - 2010 UR - http://edok01.tib.uni-hannover.de/edoks/e01fb12/685831345.pdf IS - Schlussbericht / Az: II D 5 - 25/06 SP - 1 EP - 54 CY - Berlin AN - OPUS4-28373 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pentzien, Simone A1 - Rabin, Ira A1 - Hahn, Oliver A1 - Krüger, Jörg A1 - Kleber, F. A1 - Hollaus, F. A1 - Diem, M. A1 - Sablatnig, R. T1 - Can modern technologies defeat nazi censorship? KW - Laser cleaning KW - Multispectral imaging KW - Image enhancement KW - Ancient manuscripts KW - Image restoration PY - 2010 SN - 1556-4673 VL - 2 IS - 3, Article 1 SP - 1 EP - 16 PB - Association for Computing Machinery CY - New York, NY, USA AN - OPUS4-25651 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF ED - Hahn, Oliver ED - Hauptmann, A. ED - Modarressi-Tehrani, D. ED - Prange, M. T1 - Archäometrie und Denkmalpflege 2010 - Jahrestagung im Deutschen Bergbau-Museum Bochum T2 - Archäometrie und Denkmalpflege 2010, Jahrestagung im Deutschen Bergbau-Museum CY - Bochum, Germany DA - 2010-09-15 PY - 2010 SN - 0947-6229 SP - 1 EP - 292 PB - Deutsches Bergbau-Museum CY - Bochum AN - OPUS4-26354 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Akkerman, Floris T1 - CE-Kennzeichnung und Ökodesign - neue Umweltanforderungen für viele Produkte KW - Ökodesign KW - EBPG PY - 2010 SN - 1439-2593 SN - 0930-3111 VL - 1 SP - 41 PB - BVS, Braun Verl.-Services CY - Baden-Baden AN - OPUS4-27959 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schaefer, A. A1 - Wagner, M.F.-X. A1 - Pelegrina, J.L. A1 - Olbricht, Jürgen A1 - Eggeler, G. T1 - Localization events and microstructural evolution in ultra-fine grained NiTi shape memory alloys during thermo-mechanical loading N2 - Subjecting a thin NiTi specimen to uniaxial tension often leads to a localized martensitic transformation: macroscopic transformation bands form and propagate through the specimen, separating it into regions of fully transformed martensite and original austenite. In the present study, the alternating current potential drop (ACPD) technique is used to analyze the change in electrical resistance of ultra-fine grained NiTi wires subjected to a broad range of thermo-mechanical load cases: (i) uniaxial tensile straining at constant temperatures (pseudoelastic deformation); (ii) cooling and heating through the transformation range at constant load (actuator load case); (iii) a combination of mechanical and thermal loading. We monitor the ACPD signals in several zones along the gauge length of specimens, and we demonstrate that a localized type of transformation is a generic feature of pseudoelastic as well as of shape memory deformation. Moreover, the ACPD signals allow to differentiate between temperature-induced martensite (formed during cooling at no or relatively small loads), stress-induced martensite, and reoriented martensite (formed under load at low temperatures). PY - 2010 DO - https://doi.org/10.1002/adem.201000063 SN - 1438-1656 VL - 12 IS - 6 SP - 453 EP - 459 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-28616 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thater, Raphael A1 - Perret, William A1 - Schwenk, Christopher A1 - Alber, U. A1 - Rethmeier, Michael T1 - Industrial application of welding temperature field and distortion visualization using FEA KW - Numerical welding simulation KW - Temperature field KW - Distortion KW - Industrial application KW - Automotive assembly PY - 2010 SN - 0387-4508 VL - 39 IS - 2 SP - 232 EP - 234 CY - Osaka, Japan AN - OPUS4-24354 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaal, Mate A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Brekow, Gerhard T1 - Einsatz von Luftultraschall-Sensoren mit geringer akustischer Impendanz T2 - 36th Annual Conference on Acoustic - DAGA 2010 CY - Berlin, Germany DA - 2010-03-15 PY - 2010 AN - OPUS4-25203 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völz, Uwe A1 - Kreutzbruck, Marc A1 - Heckel, Thomas A1 - Mrasek, Heinz T1 - Verification of ultrasonic field modeling by visualization of wave propagation in solids N2 - When dealing in ultrasonic testing with inhomogeneous and anisotropic material structure such as diverse types of components made from austenitic or nickel based cast, which are currently used for modern power plant concepts, data interpretation is quite difficult. For better understanding of the complex interaction between the sound field and the component under test, the mathematical modeling of sound propagation in solids is a substantial task to increase the probability of detection of relevant defects. First we present a mathematical approach for modeling the three dimensional transient particle displacement as a function of time in each point in a half space excited by an impulsive point load at the surface. The transient ultrasonic field of a rectangular array element is calculated with this approach by a point source synthesis. Based on this solution we model the wave propagation of a phased array transducer by time delayed superposition of the wave field of the transducer elements. Next we use an electrodynamic technique to visualize the grazing sound field at the surface of a test block radiated by a phased array probe. By detecting the grazing beam at the sample’s surface with a small electrodynamic probe, we measured the particle displacement as a function of time. It allows for measuring the displacement in all three spatial directions. This comprises the detection of the horizontal and vertical particle displacement with respect to the surface and thus also the detection of longitudinal and shear waves is possible. The calculated and measured wave fields will be compared for different delay laws in isotropic and transversely isotropic media. The results support the theoretical activities to model the wave propagation and to find optimal testing parameters for different components and configurations. T2 - 8th International conference on NDE in relation to structural integrity for nuclear and pressurised components CY - Berlin, Germany DA - 2010-09-29 KW - Sound field KW - Wave propagation KW - Visualization KW - Modeling KW - Phased array PY - 2010 SN - 978-3-940283-30-6 IS - DGZfP-BB 125 (Th.4.A.2) SP - 1 EP - 7 CY - Berlin AN - OPUS4-25229 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Antoni, S. A1 - Kunath, K. A1 - Lüth, Peter A1 - Schlage, R. A1 - Simon, K. A1 - Uhlig, S. A1 - Wildner, W. A1 - Zimmermann, C. T1 - Evaluation of the interlaboratory test on the method UN test O.1 'Test for oxidizing solids' with sodium perborate monohydrate 2005 / 06 N2 - The classification of solid oxidizers according to the GHS (Globally Harmonized System of Classifica-tion and Labelling of Chemicals) and according to regulations on the transport of dangerous goods (based on the UN Recommendations/Model Regulations and implemented in all carrier domains as transport by road, railway, sea, air) is performed on the basis of the results of the UN test O.1 (―Test for oxidizing solids‖ described in chapter 34.4.1 in the Recommendations on the Transport of Danger-ous Goods, Manual of Tests and Criteria, Fifth revised edition, United Nations, New York and Geneva, 2009). This test was introduced into the UN Test Manual in 1995 as a replacement for a similar test from 1986. Even though the O.1 test is much better than the previous one there are still many prob-lems with this test. For this reason the IGUS-EOS working group (international group of experts on the explosion risks of unstable substances – working group: energetic and oxidizing substances) installed an ad-hoc working group in 2002 assigned with the task of proposing solutions for the existing prob-lems. The adequacy of such proposals has to be proven preferably by interlaboratory comparison (interlaboratory test) before they are presented to the UN Sub Committee for adoption into the UN Test Manual. The present report is the evaluation of an interlaboratory test which was designed by the Ad-hoc working group in order to find out whether the current method of comparing combustion times of test mixtures with those of reference mixtures is suitable in principle and whether some approaches for improvement of the method can be identified. KW - Oxidiser KW - Oxidierend KW - Gefahrgut KW - Dangerous goods KW - UN O.1 KW - Prüfmethode KW - Test method PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-250919 UR - http://www.bam.de/de/service/publikationen/publikationen_medien/un_test_for_oxidizing_solids_final_report_on_interlab_test.pdf SN - 978-3-9814281-2-4 SP - 1 EP - 65 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin ET - Final report AN - OPUS4-25091 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, A. A1 - Rübner, Katrin A1 - Schnell, A. T1 - Das Rohstoffpotenzial von Bauabfällen N2 - Die Ressourcenverknappung und steigende Preise rücken nachhaltiges Wirtschaften und die Wiederverwertung von Abfällen in den Blickpunkt der Forschung. Bauabfälle sind in Deutschland – mit 72,4 Mio.t im Jahr 2004 – der größte Abfallstrom. Es wird ein Überblick über den Stand der Technik zur Aufarbeitung und Verwertung von Bauabfällen gegeben und die Anforderungen an Bauabfälle, die als Sekundärrohstoff eingesetzt werden sollen, diskutiert. Die Forschung im Baustoffrecycling bezieht sich sowohl auf neue Aufbereitungstechniken als auch auf die Charakterisierung der Recyclingmaterialien sowie auf deren Einfluss auf die Betonqualität. Die Eignung und Verwertung von Bauabfällen als Sekundärrohstoffe für Baustoffe wird anhand ihrer chemischen Zusammensetzungen mit Hilfe von ternären Diagrammen diskutiert.---------------------------------------------------------------------- An overview about quantity of construction and demolition waste (CDW) and a state of the art of the reuse is given. The technology is described, which is applied for the processing of CDW in a stationary plant. The requirements on recycled aggregates, which shall be used in road construction or in manufacturing of concrete, can be divided in such related to the material and physical properties and such related to the environmental properties. The rules give guidance on the composition with the aim of excluding the constituents with unfavourable features. The environmental standards which yet in discussion are give threshold of the leachable components in recycled aggregates. The material potential of building waste is discussed. Information on the chemical composition of recycled materials is compared with the composition of pure materials. With the aid of ternary charts such building materials are identified, in which the recycled materials can be used as recycled feedstock. KW - Bauschutt KW - Baustoffe KW - Rohstoffe KW - Building materials KW - Construction waste KW - Raw materials PY - 2010 DO - https://doi.org/10.1002/cite.201000149 SN - 0009-286X SN - 1522-2640 VL - 82 IS - 11 SP - 1861 EP - 1870 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-25069 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kuschke, Christian A1 - Neumeyer, Tino A1 - Wille, Frank A1 - Droste, Bernhard T1 - Mechanical/thermal package design safety assessment and manufacturing quality assurance of spent fuel transport cask NCS 45 T2 - WM2010 - 36th Annual radioactive waste management symposium CY - Phoenix, Arizona, USA DA - 2010-03-07 KW - Package design KW - Spent fuel transport cask KW - Safety assessment PY - 2010 SN - 978-0-9828171-0-0 SP - 1 EP - 13 CY - Tempe, AZ, USA AN - OPUS4-24344 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kuschke, Christian A1 - Ballheimer, Viktor A1 - Wille, Frank A1 - Komann, Steffen T1 - Mechanical assessment criteria of spent fuel assemblies basket design N2 - Packages for the transport of radioactive material are generally equipped with specific structures (basket) to support the radioactive content in defined position. The safety function of the basket depends on the kind of transported inventory. In case of transport cask for spent fuel, the basket design has to ensure the subcriticality of the fissile material in all conditions of transport in particular. Therefore the evaluation of structural integrity and neutron absorption capability of the basket is an important part of complete safety analysis. Sufficient heat transfer to maintain fuel assembly and cask temperature within allowable limits has to be verified as well. Corrosion resistance is an additional requirement on basket materials owing to contact with water during loading and unloading operations. Computational and experimental methods or their combination along with additional material and component tests can be used to analyse the mechanical and thermal basket behaviour under transport conditions defined in IAEA regulations. By deciding between the analysis methods, the design features (including material selection concept) as well as specific safety function should be accounted. In approval procedures of transport packages for radioactive materials, the competent authority mechanical and thermal safety assessment is carried out in Germany by BAM. Some questions of safety evaluation of basket designs are discussed in this paper based on the BAM experience within approval procedures. The paper focuses primarily on the mechanical behaviour of baskets with regard to the assumptions that have to be used in the criticality safety demonstration. The state of the art methodologies for computational basket stress and deformation analysis as well as for interpretation of drop tests results are presented. T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Transport conditions KW - Spent fuel assemblies KW - Basket design PY - 2010 SP - 1 EP - 7 (Thursday T36/92) AN - OPUS4-24345 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pfister, Sabine A1 - Knaust, Christian A1 - Krause, Ulrich T1 - Methoden zur Vorhersage der Brandausbreitung in Industrieanlagen T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-24601 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von der Ehe, Kerstin A1 - Jaunich, Matthias A1 - Wolff, Dietmar A1 - Böhning, Martin A1 - Goering, Harald T1 - Radiation induced structural changes of (U)HMW polyethylene with regard to its application for radiation shielding N2 - The special properties of high molecular weight polyethylene (HMW-PE) and ultra high molecular weight polyethylene (UHMW-PE) result basically from their extreme chain lengths and their high degree of crystallinity. As high-performance polymers, they are used for a variety of applications. UHMW-PE in particular is often utilized for endoprothesis (due to its excellent slip and wear properties) and due to its high hydrogen content as a neutron moderator in casks for storage and transport of radioactive materials. To prepare the material for instance for its use as a total joint replacement, it is exposed to radiation for several reasons, such as sterilization and crosslinking, leading to partial improvement of the mechanical properties (e.g. fracture toughness, crack propagation resistance, wear resistance) and better chemical stability. To be applicable for long term radiation shielding purposes for instance over a period of 40 years, PE has to withstand any type of degradation affecting safety relevant aspects. The scope of our investigation comprises an estimation of the radiation impact on the molecular and supra molecular structure of two types of PE and to what extent these changes are detectable by thermo-analytical (TA) methods, such as Differential Scanning Calorimetry (DSC), Thermo Mechanical Analysis (TMA), Dynamic Mechanical Analysis (DMA) and Thermo Gravimetric Analysis (TGA). Additionally FT-IR spectroscopy as well as density and gas sorption measurements were carried out. Due to the poor solubility of HMW-PE and UHMW-PE, some classical analytical techniques are not applicable. But TA-methods represent a feasible approach to detect structural and morphological features of these materials as well as changes caused by external influences, such as thermal treatment and/or irradiation. With the combination of the applied TA-techniques it is possible to distinguish between crosslinking and degradation. T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 PY - 2010 SP - 1 EP - 8 (T25/Paper 173) AN - OPUS4-24621 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Borch, Jörg-Peter A1 - Ulrich, Armin A1 - Blees, Christian T1 - Wärmeeintragsversuche mit Gefahrgutumschließungen auf den neuen Brandprüfständen der BAM - Ein Vergleich von Kerosin/Heizöl- und Propanfeuer N2 - In internationalen Normen und Regelwerken werden zur Überprüfung der thermischen Belastbarkeit von Umschließungen für gefährliche Güter Versuche vorgeschrieben, die u. a. Vorgaben hinsichtlich der Wärmebelastung enthalten. Diese Vorgaben beziehen sich i. d. R. auf ein Kerosin- oder Heizölfeuer, denen die Gefahrgutumschließungen ausgesetzt werden müssen. Versuche mit diesen Medien belasten jedoch die Umwelt in einem heute nicht mehr tragbaren Umfang. Als alternatives Medium bietet sich verflüssigtes Propangemisch (LPG) an. Zur Ermittlung eines äquivalenten Wärmeeintrags mussten vergleichende Versuche durchgeführt werden. Hierzu hat die BAM Bundesanstalt für Materialforschung und -Prüfung neue Brandprüfstände entwickelt und die nachfolgend beschriebenen Untersuchungen durchgeführt. PY - 2010 SN - 1434-9728 SN - 1436-4948 SN - 0372-2457 SN - 0376-1185 VL - 51 IS - 6 SP - 41 EP - 44 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-24624 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rahman, Mehbub-Ur A1 - Marklein, R. A1 - Miao, Jinghong T1 - Applied Modeling and Inverse Profiling in Electromagnetic Non-Destructive Evaluation T2 - 20th International Symposium on Electromagnetic Theory (EMTS 2010) CY - Berlin, Germany DA - 2010-08-16 PY - 2010 AN - OPUS4-25256 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kolkoori, Sanjeevareddy A1 - Rahman, Mehbub-Ur A1 - Prager, Jens A1 - Kreutzbruck, Marc T1 - Acoustic wave energy skewing and coefficients for the reflected and transmitted plane waves in general homogeneous transversely-isotropic austenitic materials N2 - In this contribution a simulation tool is developed to compute the energy skewing angles and energy coefficients for the reflected and refracted plane waves in following general cases: (1) reflection and refraction of plane elastic waves at an interface between isotropic and transversely isotropic solid, (2) reflection and refraction of plane elastic waves at an interface between transversely isotropic and isotropic solid, (3) reflection and refraction of plane elastic waves at an interface between two general transversely isotropic solid and (4) reflection of plane elastic waves from a stress free boundary of a transversely isotropic solid. Computational results for analytically evaluated acoustic wave energy skewing angles and energy reflection and transmission coefficients in acoustically anisotropic materials such as austenitic steel materials exhibiting columnar grain orientation are presented. The obtained results show that the acoustic energy skewing angles and coefficients in austenitic steel materials strongly depend upon the columnar grain orientation and are less influenced by the grain orientations which are parallel and perpendicular to the interface. T2 - 8th International conference on NDE in relation to structural integrity for nuclear and pressurised components CY - Berlin, Germany DA - 2010-09-29 KW - Anisotropy KW - Austenitic weld material KW - Energy skewing KW - Critical angle KW - Energy flux vector KW - Energy coefficients PY - 2010 SN - 978-3-940283-30-6 IS - DGZfP-BB 125 (Th.1.C.3) SP - 1 EP - 10 CY - Berlin AN - OPUS4-25232 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kuschke, Christian A1 - Ballheimer, Viktor A1 - Wille, Frank A1 - Komann, Steffen T1 - Mechanical Assessment criteria of spent fuel assemblies basket design T2 - PATRAM 2010, The International Symposium On The Packaging And Transportation Of Radioactive Materials CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-24285 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kuschke, Christian A1 - Neumeyer, Tino A1 - Wille, Frank A1 - Droste, Bernhard T1 - Mechanical/Thermal Package Design Safety Assessment and Manufacturing Quality Assurance of Spent Fuel Transport Cas NCS 45 T2 - Waste Management 2010 Conference CY - Phoenix, AZ, USA DA - 2010-03-07 PY - 2010 AN - OPUS4-24286 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaenisch, Gerd-Rüdiger A1 - Ewert, Uwe A1 - Deresch, Andreas A1 - Bellon, Carsten A1 - Przybilla, Waldemar T1 - Measurement and modeling of scatter ratios at high energies T2 - QNDE 2010 CY - San Diego, CA, USA DA - 2010-07-18 PY - 2010 AN - OPUS4-25383 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin, Tina A1 - Trela, Christiane A1 - Kind, Thomas A1 - Gil, Magdalena A1 - Wöstmann, Jens T1 - Detection of granite landmarks in soil with GPR T2 - 13th International conference on ground penetrating radar CY - Lecce, Italy DA - 2010-06-21 KW - Ground penetrating radar (GPR) KW - Granite landmarks PY - 2010 SN - 978-1-4244-4605-6 IS - IEEE Catalog Number: CFP10538 SP - 478 EP - 482 AN - OPUS4-25323 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Prager, Jens A1 - Hoever, C. T1 - Flaw detection using a selective lamb mode excitation with phased array transducers N2 - Lamb waves travel in plates and hollow cylinders over large distances and propagate with multiple mode shapes. Therefore the waves can be used for integrity tests of large scale structures. Each propagating wave mode has a unique dispersive character and a frequency dependent vibration pattern. Therefore, by interacting with flaws each mode is assumed to generate an individual reflection pattern depending on the flaw type, flaw orientation and size. To extract this information a frequency as well as wave number dependent mode excitation is required ensuring a single mode excitation. The challenge, however, is to control the selective mode excitation electronically to allow a sequence of consecutive tests with different wave modes to collect the data. A method is proposed using phased array wedge transducers with fluid coupling for normal force excitation of Lamb wave modes. The excitation principle is investigated analytically on plates by modelling the wave generation in the wedge and the coupling between wedge and structure. The analytical results of the excitation principle are validated by corresponding experiments where the field patterns on the wedge surface and on the plate were scanned using a laser vibrometer. The directivity of the radiated field is investigated together with the direction dependent analysis of the mode content. T2 - 2010 IEEE International ultrasonics symposium (IUS) CY - San Diego, CA, USA DA - 2010-10-11 KW - Guided waves KW - Phased array KW - Wave propagation PY - 2010 SN - 978-1-4577-0382-9 DO - https://doi.org/10.1109/ULTSYM.2010.5935498 SP - 1156 EP - 1159 AN - OPUS4-25327 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Anka A1 - Schmidt, Martin A1 - Ferrero, Fabio A1 - Krause, Ulrich T1 - Leitfaden zur Brandvermeidung durch Selbstentzündung bei der Lagerung von Recycling- und Deponiestoffen KW - Selbstentzündungsgefährdung KW - Recycling- und Deponiestoffe KW - Brandschutzmaßnahmen PY - 2010 SP - 1 EP - 16 PB - MUGV Brandenburg - Referat Presse- und Öffentlichkeitsarbeit CY - Potsdam AN - OPUS4-25391 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gili, F. A1 - Igartua, A. A1 - Luther, R. A1 - Woydt, Mathias T1 - The impact of biofuels on engine oil's performance T2 - 17th International colloquium tribology CY - Esslingen, Germany DA - 2010-01-19 KW - Lubricants KW - Engine oil KW - Additives KW - Bio-fuel KW - Ester KW - Polyglycol KW - Thin film coatings KW - Slip-rolling KW - DLC KW - Dilution KW - FAME KW - Jatropha KW - Rape seed KW - Stem valve KW - Piston ring PY - 2010 SP - 17_Woydt_Biofuels_Plenary, 1 EP - 13 AN - OPUS4-24832 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hennecke, Manfred T1 - Innovation und Normung: Kein Gegensatz, keine Selbstverständlichkeit T2 - Zenit Zentrum für Innovation und Technik in NRW CY - Mülheim an der Ruhr, Germany DA - 2010-05-14 PY - 2010 AN - OPUS4-24851 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hennecke, Manfred T1 - Die BAM: Ressortforschungseinrichtung für Sicherheit in Technik und Chemie T2 - Bundesministerium für Wirtschaft und Technologie CY - Berlin, Germany DA - 2010-04-22 PY - 2010 AN - OPUS4-24852 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hennecke, Manfred T1 - Innovation und Normung: Kein Gegensatz, keine Selbstverständlichkeit T2 - Kolloquium Institut für Leichtbau, Technische Universität Dresden CY - Dresden, Germany DA - 2010-06-17 PY - 2010 AN - OPUS4-24853 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hennecke, Manfred T1 - Innovation und Normung: Kein Gegensatz, keine Selbstverständlichkeit T2 - Jahrestagung DGO, Deutsche Gesellschaft für Galvano- und Oberflächentechnik CY - Berlin, Germany DA - 2010-09-22 PY - 2010 AN - OPUS4-24854 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hennecke, Manfred T1 - Innovation und Sicherheit im Staatsauftrag: Aus der Arbeit der BAM T2 - Rotary Club CY - Berlin, Germany DA - 2010-09-26 PY - 2010 AN - OPUS4-24855 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hennecke, Manfred T1 - Grußwort für die AG Ressortforschung T2 - Festakt zum 100-jährigen Gründungsjubiläum des Friedrich-Löffler-Instituts CY - Greifswald, Germany DA - 2010-10-10 PY - 2010 AN - OPUS4-24856 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hennecke, Manfred T1 - Reference Materials for Material Science and Technology T2 - Conference of the IRMM "The Future of Reference Materials - Science and Innovation" CY - Geel, Belgium DA - 2010-11-23 PY - 2010 AN - OPUS4-24857 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas ED - Charles, J. T1 - Application of duplex stainless steels in civil engineering T2 - 8th Duplex stainless steel - International conference & exhibition CY - Beaune, France DA - 2010-10-13 KW - Lean duplex KW - Nichtrostender Stahl KW - Korrosionsbeständigkeit PY - 2010 SN - 978-2-7598-0672-0 SP - 1143 EP - 1156 PB - EDP Sciences AN - OPUS4-24976 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kind, Thomas A1 - Martin, Tina A1 - Trela, Christiane A1 - Gil, Magdalena A1 - Wöstmann, Jens T1 - Detection of Granite Landmarks in Soil with GPR T2 - 13th International Conference on Ground Penetrating Radar (GPR) 2010 CY - Lecce, Italy DA - 2010-06-21 PY - 2010 AN - OPUS4-25019 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krug, Sonja A1 - Lang, A. A1 - Zimmer, J. A1 - Homolka, M. A1 - Hahn, Oliver T1 - Folgen der historischen Schädlingsbekämpfung in Archiven und Museen. Risikoabschätzung - Gefahr für Mensch und Umwelt T2 - Jahrestagung im Deutschen Bergbau-Museum - Archäometrie und Denkmalpflege 2010 CY - Bochum, Germany DA - 2010-09-15 PY - 2010 SN - 0947-6229 VL - 3 SP - 268 EP - 270 PB - Dt. Bergbau-Museum CY - Bochum AN - OPUS4-27536 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wöhlecke, Andreas A1 - Müller, Werner ED - Burkhardt, G. ED - Egloffstein, T. T1 - Neue Richtlinien zur Zulassung von Kunststoffdichtungsbahnen, Kunststoff-Dränelementen und Geokunststoffen für Trenn-, Filter-, Schutz- und Bewehrungsfuntkionen sowie Dichtungskontrollsystemen gemäß neuer DepV T2 - Abschluss und Rekultivierung von Deponien und Altlasten 2010 - Die Umsetzung der neuen Deponieverordnung - praktische Erfahrungen im Vollzug und erste Änderungsverordnung zur neuen DepV CY - Karlsruhe, Deutschland DA - 2010-10-13 PY - 2010 SN - 978-3-939662-08-2 VL - 19 SP - 49 EP - 64 PB - ICP Eigenverlag Bauen und Umwelt CY - Karlsruhe AN - OPUS4-25557 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF ED - Goedecke, Thomas T1 - IAPRI World conference on packaging - Proceedings of the 17th IAPRI world conference on packaging T2 - 17th IAPRI World conference on packaging CY - Tianjin, China DA - 2010-10-12 PY - 2010 SN - 978-1-935068-36-5 SP - 1 EP - 448 PB - Scientific research publishing AN - OPUS4-29041 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goebbels, Jürgen A1 - Hanke, Daniel A1 - Meinel, Dietmar A1 - Staude, Andreas A1 - Beck, Matthias A1 - Burkert, Andreas T1 - Computed Tomography - A new tool studying hidden corrosion T2 - 10th European Conference on Non-destructive Testing CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-19760 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radnik, J. A1 - Bentrup, U. A1 - Emmerling, Franziska A1 - Brückner, A. T1 - Die Kopplung von Röntgenstreuung und optischer Sketroskopie an der µ-Spot Beamline bei Bessy zum Online Monitoring der Herstellung komplexer Mischoxide T2 - Deutsche Tagung für Forschung mit Synchrotronstrahlung, Neutronen und Ionenstrahlen an Großgeräten CY - Berlin, Germany DA - 2010-02-24 PY - 2010 AN - OPUS4-20178 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von Chrzanowski, Lars A1 - Beckmann, Jörg A1 - Ewert, Uwe A1 - Schade, U. T1 - Capability of terahertz-wave instrumentation for non destructive testing of liquids T2 - ECNDT Tagung 2010 CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-20183 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Staude, Andreas A1 - Ehrig, Karsten A1 - Goebbels, Jürgen A1 - Schulze, Manfred A1 - Bartscher, M. T1 - Dimensionelles Messen von Mikrobauteilen mit Synchrotron-CT an der BAMline bei BESSY II T2 - SNI2010 CY - Berlin, Germany DA - 2010-02-24 PY - 2010 AN - OPUS4-20184 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fontana, Patrick A1 - Lehmann, Christian A1 - Müller, Urs A1 - Meng, Birgit T1 - Reactivity of Mineral Additions in Autoclaved UHPC T2 - International Conference on Material Science and 64th RILEM Annual Week, Additions Improving Properties Of Concrete CY - Aachen, Germany DA - 2010-09-06 PY - 2010 AN - OPUS4-20165 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bosiljkov, V. A1 - Maierhofer, Christiane A1 - Köpp, Christian A1 - Wöstmann, Jens T1 - Assessment of structure through non-destructive tests (NDT) and minor destructive tests (MDT) investigation: case study of the church at carthusian monastery at Zice (Slovenia) KW - On-site investigation KW - Destructive and non-destructive tests KW - Radar KW - Thermography KW - Historic masonry KW - Structural and material characterization PY - 2010 DO - https://doi.org/10.1080/15583050902731031 SN - 1558-3058 SN - 1558-3066 VL - 4 SP - 1 EP - 15 PB - Taylor & Francis CY - Philadelphia, Pa., USA AN - OPUS4-20465 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Grasse, Fabian A1 - Trappe, Volker A1 - Hickmann, Stefan A1 - Meister, O. T1 - Lifetime assessment for GFRP-gliders using a representative substructure N2 - In a research project fatigue tests on two identical wing sections that are used as representative substitute components were performed to estimate lifetime enhancement of light-weight aircraft such as general aviation gliders. Single step fatigue tests at limit load on one component were compared with spectrum loading on the other. A characteristic damage behaviour was observed. Local buckling due to high shear loading of the sandwich core of the wing shell causes the main damage. Even though an intentionally high load level was chosen no increase of micro-cracking could be detected. Additionally no delamination effects in laminates or bondings were observed except the skin-core delamination which causes the buckling effect in the wing shell due to fatigue loading. Finally the concept of using representative substructures and accompanying specimen tests is an effective approach for in-service loading investigations and could also be applied to research on wind turbine blades. KW - Glass fibre reinforced plastics (GFRP) KW - Grey scale value analysis KW - X-ray-refraction KW - Non-destructive testing (NDT) KW - Fatigue tests PY - 2010 DO - https://doi.org/10.1016/j.ijfatigue.2009.02.003 SN - 0142-1123 VL - 32 IS - 1 SP - 94 EP - 99 PB - Elsevier CY - Oxford AN - OPUS4-20498 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - BOOK A1 - Fuhrmann, G. A1 - Jablonski, H. A1 - Lehnecke, H.-H. A1 - Thiele, Joachim A1 - Wagenführ, L.-P. T1 - Material- und Warenprüfung in der DDR - Anspruch und Wirklichkeit PY - 2010 SP - 1 EP - 233 PB - Beuth CY - Berlin AN - OPUS4-20504 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Behrens, Frauke A1 - Wloka, Monika T1 - How IAF and ILAC manage the recognition of regional accreditation groups: the peer evaluation system of IAF and ILAC for regional accreditation groups N2 - The peer evaluation of single accreditation bodies in order to sign an Arrangement for Recognition of the international accreditation organizations International Accreditation Forum, Inc. (IAF) and International Laboratory Accreditation Cooperation (ILAC), whether performed by Regional Accreditation Groups or directly by IAF and/or ILAC, is standard practice. The fundamental requirements for such evaluations are well specified in documents. However, the careful evaluation of all their Arrangement members poses an enormous logistic task for IAF and ILAC, and the signatories can be evaluated more thoroughly within their Regional Groups. Hence, IAF and ILAC typically evaluate only the Regional Accreditation Groups and accept all signatories of a Regional Accreditation Group once successfully evaluated by their respective Regional Group. However, the requirements for the evaluation of a Regional Group are extensive, and the evaluation procedure is highly complicated and must be conducted very carefully in order to assure that the results of accreditation can be trusted. This article describes the evaluation procedure used by IAF and/or ILAC for Regional Groups wishing to sign the IAF/ILAC Arrangement. We wish to inform and to aid these Regional Groups setting out for evaluation, and also to build confidence in the IAF/ILAC Arrangements. KW - Accreditation KW - Arrangement KW - IAF KW - ILAC KW - Peer evaluation KW - Region PY - 2010 DO - https://doi.org/10.1007/s00769-009-0591-y SN - 0949-1775 SN - 1432-0517 VL - 15 IS - 1 SP - 57 EP - 66 PB - Springer CY - Berlin AN - OPUS4-20492 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Welzel, F. A1 - Grunewald, Thomas A1 - Beyer, M. A1 - Grätz, Rainer A1 - Klages, C.-P. T1 - Mechanisch erzeugte Reib- und Schlagfunken im Vergleich T2 - 12. Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Deutschland DA - 2010-06-15 PY - 2010 SN - 978-3-9813550-1-7 SN - 0938-5533 SP - 32 EP - 36 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-21266 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wlodarska, M. A1 - Schönhals, Andreas A1 - Bak Grzegorz, G. W. A1 - Mossety-Leszczak, B. A1 - Galina, H. T1 - Molecular mobility of diepoxy nematics studied by dielectric spectroscopy N2 - The molecular mobility of four liquid crystalline epoxy compounds was studied by dielectric spectroscopy in a wide range of frequency (10-1–109 Hz). All the investigated materials form a nematic liquid crystalline phase at temperatures above 60 °C, one of them additionally exhibits a smectic A phase. Two of the compounds have molecules composed of a mesogen and two symmetric tails with eight alkyl groups each. Their properties were compared with the homologous pair having two alkyl groups in each tail. The length of the carbon chain influences the temperature range of the mesophase, which was also observed in this study. Characteristic relaxation processes were observed in the different mesophases. These processes were quantitatively analyzed and the estimated parameters were discussed in detail in dependence of the structure of the materials. KW - Dielectric properties KW - Relaxation KW - Electric modulus KW - Liquid crystals and molecular liquids PY - 2010 DO - https://doi.org/10.1016/j.jnoncrysol.2009.07.048 SN - 0022-3093 VL - 356 IS - 11-17 SP - 828 EP - 832 PB - North-Holland Publ. Co. CY - Amsterdam AN - OPUS4-21267 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schicker, Johannes A1 - Sievert, Rainer A1 - Fedelich, Bernard A1 - Noack, Hans-Dieter A1 - Kazak, Fedor A1 - Matzak, Kathrin A1 - Kühn, Hans-Joachim A1 - Klingelhöffer, Hellmuth A1 - Skrotzki, Birgit T1 - Entwicklung von Rechenmodellen zur Lebensdauervorhersage von Werkstoffen für Abgasturbolader-Heißteile unter thermo-mechanischer Ermüdungsbeanspruchung und Übertragung für Anwendung auf Bauteile T2 - Informationstagung Turbomaschinen 2010 CY - Bad Neuenahr, Deutschland DA - 2010-04-15 PY - 2010 IS - R550 SP - 111 EP - 134 AN - OPUS4-21268 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Konersmann, Rainer A1 - Pötzsch, Klaus-Michael T1 - Vorschriftenentwicklung aufgrund von Unfallereignissen N2 - Jedes technische Produkt oder Verfahren ist mit einem Versagensrisiko verbunden, ein Null-Risiko gibt es nicht. Dies trifft auch für alle anderen Lebensbereiche zu. Wenn sich jedoch Unfallereignisse mit demselben Produkt ständig wiederholen und darüber hinaus mit hohen Opferzahlen oder großen Umweltschäden verbunden sind, wird immer wieder die Frage aufgeworfen, warum aus den vergangenen Ereignissen scheinbar keine Lehren gezogen worden sind, um diese Wiederholungen zu verhindern. Historische Beispiele belegen, dass es immer einer mehr oder weniger langen Zeitspanne bedarf, bis alle Akteure an dem sprichwörtlich gleichen Strick ziehen und eine Verbesserung bewirken, z. B. durch verbesserte technische Regelungen, Abkommen und Vereinbarungen. Im folgenden Beitrag wird dies an einigen Beispielen aus dem Verkehrswesen, u. a. auch aus dem Gefahrgutbereich, erläutert. KW - Risikobasierte Vorschriftenentwicklung KW - Gefahrgut KW - Unfallerzeugnisse PY - 2010 SN - 1434-9728 SN - 1436-4948 SN - 0372-2457 SN - 0376-1185 VL - 51 IS - 5 SP - 48 EP - 53 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-21269 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pretsch, Thorsten A1 - Müller, Werner T1 - Shape memory poly(ester urethane) with improved hydrolytic stability N2 - In two hydrolytic degradation studies the tensile (mechanical) and functional (thermo-mechanical) properties of a hydrolysis-stabilized shape memory poly(ester urethane) and its non-stabilized analog were investigated. Hydrolytic degradation was enforced by specimen immersion in de-ionized water at 80 °C. Significant differences in the fundamental shape memory parameters were monitored as function of aging time for the stabilized and non-stabilized polymer. This included the ability to recover strain (shape recoverability) and stress (stress recoverability) on heating after shape programming. Hydrolysis-related mechanical and functional changes were correlated with morphological ones, detected by differential scanning calorimetry (DSC). The shape memory poly(ester urethane), which was protected by a carbodiimide-based hydrolysis stabilizer, revealed significantly improved resistance towards hydrolysis with respect to various mechanical and shape memory parameters. KW - Shape memory polymers KW - Hydrolytic degradation KW - Stabilization KW - Thermo-mechanical properties KW - Poly(ester urethane) KW - Active polymers PY - 2010 DO - https://doi.org/10.1016/j.polymdegradstab.2009.12.020 SN - 0141-3910 SN - 1873-2321 VL - 95 IS - 5 SP - 880 EP - 888 PB - Applied Science Publ. CY - London AN - OPUS4-21270 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herter, Jürgen A1 - Mehdianpour, Milad A1 - Hille, Falk T1 - Repair of a railway viaduct in Berlin and inspection concepts to extend the service life T2 - Structural faults & repair 2010 - International conference and exhibition CY - Edinburgh, Scotland, UK DA - 2010-06-15 KW - Remaining fatigue life KW - Riveted steel bridges KW - Experimental investigations KW - Radiographic inspection KW - Loading tests PY - 2010 SN - 0-947644-67-9 SP - 1 EP - 15 PB - Engineering Technics Press CY - Edinburgh, Scotland AN - OPUS4-21271 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaunich, Matthias A1 - Wolff, Dietmar A1 - Stark, Wolfgang T1 - Tieftemperaturverhalten von Elastomerdichtungen - Eigenschaftsbestimmung für den Einsatz in Transport- und Lagerbehältern für radioaktive Stoffe N2 - Die Messung des dynamischen Speichermoduls mit der Dynamisch-Mechanischen-Analyse ermöglicht einen schnellen Überblick über das temperaturabhängige Verhalten von elastomeren Dichtungsmaterialien. Ein direkter Rückschluss von der so ermittelten Glasübergangstemperatur Tg auf die Versagenstemperatur einer Dichtung ist aber ohne zusätzliche Messungen bisher nicht möglich. Mit den Ergebnissen des Druckverformungsrestes DVR und des DVRDMA ist eine ge-nauere Beschreibung der Tieftemperatureigenschaften und dadurch der Funktion von elastomeren Dichtungsmaterialien möglich. Messungen ergeben beispielsweise, dass sich das EPDM bei einer Temperatur von -40 °C laut der Dynamisch Mechanischen Analyse noch im gummielastischen Bereich befindet. Die DVRDMA-Werte zeigen eine Rückstellung um mehr als 40 % der Ausgangsdeformation in wenigen Minuten. Mit derart detailliert bestimmten Eigenschaften lassen sich Rückschlüsse auf einsatzspezifische Anforderungen wie z. B. die Dichtwirkung in Abhängigkeit von Betriebstemperatur und mechanischer Belastungsgeschwindigkeit ziehen, so dass je nach Einsatzbedingungen für die Dichtungen eine geeignete Materialauswahl getrof-fen werden kann. T2 - Jahrestagung Kerntechnik 2010 CY - Berlin, Deutschland DA - 2010-05-04 KW - Dichtungen KW - Elastomere KW - Tieftemperaturverhalten PY - 2010 IS - Sektion 5 / 503 SP - 1 EP - 4 CY - Berlin AN - OPUS4-21272 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maskos, Michael A1 - Bantz, C. A1 - Koshkina, Olga A1 - Noskov, Sergey A1 - Scherer, Christian A1 - Utech, St. T1 - Multifunctional, Polymeric Nanoparticles in Biological Environments T2 - Seminarreihe des BCRT CY - Berlin, Germany DA - 2010-05-04 PY - 2010 AN - OPUS4-21273 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hoffmann, Katrin A1 - Mix, Renate A1 - Friedrich, Jörg Florian A1 - Resch-Genger, Ute ED - Geddes, C.D. T1 - Spectroscopic characterization of plasma - Chemically functionalized and fluorophore-labeled polymer surfaces N2 - The potential of spectrofluorometry and fluorescence microscopy for the characterization and quantification of different functionalities like OH and NH2 groups at plasma-chemically modified polymer surfaces is assessed using traditional reactive dyes such as dansyl derivatives and a sophisticated VIS-excitable chromogenic and fluorogenic pyrylium label showing binding-induced spectral and intensity changes in absorption and emission. Aiming at an improved fluorometric surface analysis, based upon these measurements, several sources of uncertainty inherent to fluorescence measurements are illustrated ranging from environment-dependent dye absorption and emission features over spectral correction and nonspecific adsorption to the critical influence of label choice on the measured background. Solutions to these drawbacks are given thereby underlining the potential of fluorometry for surface analysis. KW - Polymer functionalization KW - Plasma modification KW - Fluorescence spectroscopy KW - Surface labeling PY - 2010 SN - 978-1-4419-0828-5 DO - https://doi.org/10.1007/978-1-4419-1260-2_6 N1 - Serientitel: Reviews in Fluorescence – Series title: Reviews in Fluorescence VL - 5 SP - 139 EP - 160 PB - Springer Science + Business Media AN - OPUS4-21274 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hertwig, Andreas A1 - Beck, Uwe T1 - Optische Messtechnik an Mikrotopografien T2 - OptecBB Veranstaltungsreihe MPK CY - Potsdam, Germany DA - 2010-05-19 PY - 2010 AN - OPUS4-21275 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bartholmai, Matthias A1 - Werner, Klaus-Dieter A1 - Kammermeier, Michael T1 - Temperaturabhängige Prüfung von Beschleunigungsaufnehmern für stoßartige Beanspruchungen T2 - 15. ITG/GMA-Fachtagung - Sensoren und Messsysteme 2010 CY - Nürnberg, Deutschland DA - 2010-05-18 KW - Beschleunigungsaufnehmer KW - Hopkinsonstab KW - Fallprüfung KW - Gefahrstoffe KW - Behälter PY - 2010 SN - 978-3-8007-3260-9 IS - A1 / Paper 2 SP - 24 EP - 26 PB - VDE-Verl. CY - Berlin; Offenbach AN - OPUS4-21326 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neumann, Patrick P. A1 - Bartholmai, Matthias A1 - Wiggerich, B. T1 - Mikrodrohne zur Charakterisierung und selbstoptimierenden Suche von gasförmigen Gefahrstoffquellen T2 - 15. ITG/GMA-Fachtagung - Sensoren und Messsysteme 2010 CY - Nürnberg, Deutschland DA - 2010-05-18 KW - Mikrodrohne KW - Quadrokopter KW - Robotik KW - Suche und Lokalisierung von gasförmigen Gefahrstoffquellen PY - 2010 SN - 978-3-8007-3260-9 IS - Paper 136 SP - 753 EP - 757 PB - VDE-Verl. CY - Berlin; Offenbach AN - OPUS4-21327 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sobala, J. A1 - Schwarz, Silke A1 - von Oertzen, Alexander A1 - Zawadzka-Malota, I. A1 - Dorazil, T. A1 - Aufauvre, L. T1 - Tests of toxic fumes of high explosives performed within the International Testing Programme ITP 2009 T2 - International Conference Blasting Techniques 2010 CY - Stará Lesná, Slovakia DA - 2010-05-20 PY - 2010 AN - OPUS4-21328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Horn, Wolfgang T1 - Sensorische Bewertung der Emissionen aus Bauprodukten Vorgehensweise / Chemisch analytische Messungen T2 - 17. WaBoLu Innenraumtage CY - Berlin, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21330 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kannengießer, Thomas A1 - Brauser, Stephan A1 - Kromm, Arne T1 - Synchrotron Diffraction for In-situ Characterizations of Materials Behaviour T2 - 3 rd IURS (Inter-University Research symposium) Advances in Welding and Joining CY - Busan, South Korea DA - 2010-05-14 PY - 2010 AN - OPUS4-21331 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lehnik-Habrink, Petra A1 - Hein, Sebastian A1 - Berners, Dino A1 - Kaminski, Katja T1 - BZE II - Gehalte organischer Schadstoffe in oberen Bodenhorizonten T2 - Statusseminar zur Bundesbodenzustandserhebung II (UBA) CY - Berlin, Germany DA - 2010-04-16 PY - 2010 AN - OPUS4-21332 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Griesche, Axel A1 - Zhang, B. A1 - Solórzano, E. A1 - Garcia-Moreno, F. T1 - Note: X-ray radiography for measuring chemical diffusion in metallic melts N2 - A x-ray radioscopy technique for measuring in situ chemical diffusion coefficients in metallic melts is presented. The long-capillary diffusion measurement method is combined with imaging techniques using microfocus tubes and flat panel detectors in order to visualize and quantitatively analyze diffusive mixing of two melts of different chemical composition. The interdiffusion coefficient as function of temperature and time is obtained by applying Fick’s diffusion laws. Tracking the time dependence of the mean square penetration depth of the mixing process allows to detect changes in the mass transport caused by convective flow. The possibility to sort out convective mass transport contributions from analysis enhances significantly the accuracy compared to the conventional long-capillary diffusion measurement method with postmortem analysis. The performance of this novel diffusion measurement method with x-ray radiography technique is demonstrated by a diffusion experiment in an Al-Ni melt. KW - Diffusion KW - Metal KW - Aluminium KW - Nickel KW - Melt KW - In-situ KW - Radiography KW - Capillary KW - Aluminium-alloys KW - Chemical analysis KW - Chemical interdiffusion KW - Convection KW - Liquid alloys KW - Mass transfer KW - Nickel alloys KW - X-ray apparatus PY - 2010 DO - https://doi.org/10.1063/1.3427256 SN - 0034-6748 SN - 1089-7623 VL - 81 SP - 056104-1 - 056104-3 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-21333 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kannengießer, Thomas A1 - Tiersch, Nico T1 - Measurements of diffusible hydrogen contents at elevated temperatures using different hot extraction techniques - an international round robin test N2 - This international round robin test served to scrutinize the procedures specified in ISO/DIS 3690:2009 for determining the diffusible hydrogen content in weld metals with bcc-lattice structure. It was specifically intended to check in what respect the specifications defined in the indicated standards for specimen preparation, storage and hydrogen analysis provide comparable measurement results. The round robin test is presented comprising comparative measurements at various degassing temperatures using hot extraction techniques and a thermal conductivity detector (TCD). A major focus of this investigation was the examination of the maximum degassing temperature for analysing the diffusible hydrogen in materials with bcc-lattice structure. The analyses were performed using two different stick electrodes and three different filler wires. As a significant result it was found that no deviations or increases, were detected in the measured contents of diffusible hydrogen for the investigated degassing temperatures ranging between 45 degrees C and 400 degrees C. Hydrogen analyses for contents below HD = 1.5 ml/100 g with the hot extraction techniques in conjunction with TCD applied in this study led to considerable relative standard deviations. KW - Hydrogen KW - Measurement KW - Round robin test KW - Hot extraction KW - ISO 3690 PY - 2010 SN - 0043-2288 SN - 1878-6669 VL - 54 IS - 5/6 SP - R115 EP - R122 PB - Springer CY - Oxford AN - OPUS4-21334 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eliezer, D. A1 - Nissim, Y. A1 - Kannengießer, Thomas T1 - Effects of shielding with various hydrogen-argon mixtures on supermartensitic stainless steel TIG welds N2 - Eine Anzahl verschiedener Effekte ergibt sich aus der Anwesenheit von Wasserstoff während des Schweißens hochlegierter Stähle. Die Betriebsdauer von geschweißten Bauteilen ist außerdem stark von der Anwesenheit von Wasserstoff im Umgebungsmedium und der Anfälligkeit der verschiedenen Schweißnahtgefüge für eine Degradation ihrer Eigenschaften durch Wasserstoff abhängig. Als eine relative neue Werkstoffgeneration finden supermartensitische hoch legierte Stähle (Supermartensitic Stainless Steels - SMSS) zunehmend als Ersatz für teuere Legierungen insbesondere in der Öl- und Gasindustrie Verwendung. Als Konsequenz ihres martensitischen Gefüges sind diese Legierungen anfällig für eine wasserstoffunterstützte Rissbildung (Hydrogen Assisted Cracking - HAC). Der Widerstand von supermartensitischen Stählen gegen wasserstoffunterstützte Spannungsrisskorrosion (Hydrogen Assisted Stress Corrosion Cracking - HASCC) unter Sauergasbedingungen wurde vor allem für industrielle Einsatzzwecke extensiv untersucht. Solche Studien vornehmlich an Grundwerkstoffen basieren überwiegend auf Standard-Prüfverfahren. Dem gegenüber würde das grundsätzliche Verhalten von Wasserstoff in den Gefügen geschweißter supermartensitischer Stähle wenig untersucht. Die zentralen Gründe für die diesem Beitrag zugrunde liegende Studie waren daher, die Effekte des Wasserstoffs auf das Gefüge von Wolfram Inert Gas (WIG)-Schweißungen supermartensitischer Stähle und die entsprechenden Wasserstoff-Trapping-Mechanismen zu untersuchen. Die Wirkungen des Wasserstoffs auf die verschiedenen WIG-geschweißten Gefüge wurden mittels Röntgendiffraktometrie, Lichtmikroskopie und Rasterelektronenmikroskopie untersucht. Eine Anzahl von Verfahren wurde außerdem angewendet, um den absorbierten Wasserstoff quantitativ zu bestimmen. Die Wechselwirkung zwischen Wasserstoff mit den mikrostrukturellen Defekten und die Charakteristika der Wasserstoffdesorption wurden mittels Thermischer Desorptionsspektroskopie (TDS) und Trägergas-Heißextraktionen des Wasserstoffs (LECO Analyse) untersucht. Die Wirkung des Gefüges auf die Absorption und Desorption von Wasserstoff werden im Detail diskutiert. KW - Hydrogen assisted cold cracking KW - Supermartensit KW - XRD KW - TDS PY - 2010 DO - https://doi.org/10.3139/120.110135 SN - 0025-5300 VL - 52 IS - 5 SP - 306 EP - 315 PB - Hanser CY - München AN - OPUS4-21335 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kromm, Arne A1 - Kannengießer, Thomas A1 - Altenkirch, J. A1 - Gibmeier, J. T1 - Umwandlungsbedingte Eigenspannungen beim Schweißen mit neuartigen Schweißzusatzwerkstoffen - Ergebnisse oberflächennaher Messungen mittels Synchrotronbeugung T2 - Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e. V., AWT Fachausschuss 13 Eigenspannungen CY - Hamburg, Germany DA - 2010-05-03 PY - 2010 AN - OPUS4-21286 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kannengießer, Thomas A1 - Hodoroaba, Vasile-Dan A1 - Kipphardt, Heinrich A1 - Freigang, Fränze A1 - Gaber, Martin A1 - Ried, Peter T1 - Wasserstoffanalytik und Wasserstoffdegradation von metallischen Werkstoffen T2 - Werkstofftechnisches Kolloquium (öffentlich), Zentrum für Konstruktionswerkstoffe, Institut für Werkstoffkunde Prof. Berger CY - Darmstadt, Germany DA - 2010-04-22 PY - 2010 AN - OPUS4-21287 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Identifizierung gefährlich exotherm zersetzlicher Stoffe T2 - DECHEMA-Weiterbildungskurs "Sicherheit chemischer Reaktionen", BAM CY - Berlin, Germany DA - 2010-03-22 PY - 2010 AN - OPUS4-21288 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brookes, Stephen-Peter A1 - Kühn, Hans-Joachim A1 - Skrotzki, Birgit A1 - Klingelhöffer, Hellmuth A1 - Sievert, Rainer A1 - Pfetzing, J. A1 - Peter, D. A1 - Eggeler, G. T1 - Axial-torsional thermomechanical fatigue of a near-gamma TiAl-alloy N2 - The uniaxial, torsional and axial-torsional thermomechanical fatigue (TMF) behavior of the near-γ TiAl-alloy TNB-V5 was investigated. TMF tests were performed at 400-800 °C with mechanical strain amplitudes ranging from 0.15% to 0.7%. The tests were conducted thermomechanically in-phase (IP) and out-of-phase (OP). For the same lifetimes, uniaxial IP tests required the highest strain amplitudes, while OP test conditions were most damaging and needed the lowest strain amplitudes. The Mises equivalent mechanical strain amplitudes of pure torsional tests were found in between uniaxial in-phase and out-of-phase tests for the same lifetimes. The non-proportional multiaxial out-of-phase test showed a lower lifetime at the same equivalent mechanical strain amplitude compared to the other types of tests. The microstructure has been characterized applying electron microscopy and microstructural parameters such as fraction of twinned grains, grain size, lamellar distance and dislocation density have been quantified. KW - Gamma titanium aluminide KW - TNB-V5 KW - Thermomechanical fatigue (TMF) KW - Axial-torsional loading KW - Microstructure PY - 2010 DO - https://doi.org/10.1016/j.msea.2010.03.073 SN - 0921-5093 SN - 1873-4936 VL - 527 IS - 16-17 SP - 3829 EP - 3839 PB - Elsevier CY - Amsterdam AN - OPUS4-21289 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schicker, Johannes A1 - Sievert, Rainer A1 - Fedelich, Bernard A1 - Klingelhöffer, Hellmuth A1 - Skrotzki, Birgit T1 - Versagensabschätzung thermomechanisch belasteter Heissteile in Turboladern KW - Computersimulation KW - Materialmodell KW - Chaboche KW - Schädigung KW - Lebensdauerabschätzung PY - 2010 SN - 0024-8525 VL - 71 IS - 6 SP - 444 EP - 450 PB - Springer Automotive Media, GWV-Fachverl. CY - Wiesbaden AN - OPUS4-21290 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weber, Mike A1 - Wille, Frank A1 - Ballheimer, Viktor A1 - Musolff, André T1 - Numerische Analyse der 1-m-Fallprüfung auf einen Stahldorn T2 - Jahrestagung Kerntechnik 2010 CY - Berlin, Deutschland DA - 2010-05-04 KW - IAEO KW - 1-m-Fallprüfung KW - Stahldorn KW - Numerische Analyse KW - Verifizierung PY - 2010 IS - Sektion 5 / 505 SP - 1 EP - 5 CY - Berlin AN - OPUS4-21292 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ehrig, Karsten A1 - Bartscher, M. A1 - Goebbels, Jürgen A1 - Härtig, F. A1 - Kniel, K. A1 - Neukamm, M. A1 - Neuschaefer-Rube, U. A1 - Staude, Andreas ED - Denecke, M. ED - Walker, C. T1 - Dimensional control of micro components with synchrotron computed tomography T2 - 20th International congress on X-ray optics and microanalysis CY - Karlsruhe, Germany DA - 2009-09-14 KW - Synchrotron radiation KW - Computed tomography KW - Dimensional measurement KW - Micro components PY - 2010 SN - 978-0-7354-0764-0 SN - 0094-243X SP - 164 EP - 171 PB - American Institute of Physics AN - OPUS4-21293 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pepke, Lutz-Alexander A1 - Brauser, Stephan A1 - Weber, Gert A1 - Rethmeier, Michael A1 - Göklü, S. T1 - Einfluss der Schweißzangenkonfiguration beim Widerstandspunktschweißen moderner Stahlwerkstoffe für den Karosseriebau T2 - 21. DVS-Sondertagung Widerstandsschweißen 2010 CY - Duisburg, Germany DA - 2010-05-05 PY - 2010 AN - OPUS4-21294 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von Chrzanowski, Lars A1 - Beckmann, Jörg A1 - Marchetti, Barbara A1 - Ewert, Uwe A1 - Schade, U. T1 - Terahertz-Strahlung - Möglichkeiten für die Zerstörungsfreie Prüfung von Flüssigkeiten T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21306 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Matthias A1 - Köppen, Robert A1 - Bremser, Wolfram A1 - Nehls, Irene T1 - New reference materials for mycotoxins and acrylamide - perfect tools for reliable food analysis T2 - Tag der Chemie, FU Berlin CY - Berlin, Germany DA - 2010-06-16 PY - 2010 AN - OPUS4-21307 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hahn, Oliver T1 - Möglichkeiten und Grenzen der naturwissenschaftlichen Forschung in den Geisteswissenschaften T2 - Konferenz zur Überlieferung der griechischen Literatur anlässlich des 70. Geburtstags von Dieter Harflinger, veranstaltet vom Hamburger Teuchos-Zentrum, Staats- und Universitätsbibliothek CY - Hamburg, Germany DA - 2010-04-21 PY - 2010 AN - OPUS4-21308 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hahn, Oliver A1 - Wolff, Timo A1 - Schütz, Roman A1 - Kindzorra, Emanuel A1 - Emmerling, Franziska A1 - Schade, U. A1 - Weinberg, G. A1 - Lasch, P. T1 - Holistic approach to Qumran: Analysis of the Dead Sea Scrolls related artefacts T2 - IRUG 9, 9th Biennial Conference of the Infrared and Raman Users Group CY - Buenos Aires, Argentina DA - 2010-03-03 PY - 2010 AN - OPUS4-21309 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Torge, Manfred A1 - Krug, Sonja A1 - Bücker, Michael A1 - Scharf, Holger A1 - Witthuhn, Heike T1 - Reduction of Mercury Emission from Historical Tin-Mercury Mirrors T2 - IAQ 2010, 9th Indoor Air Quality Meeting CY - Chalon-sur-Saône, France DA - 2010-04-21 PY - 2010 AN - OPUS4-21310 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rabin, Ira A1 - Hahn, Oliver A1 - Wolff, Timo A1 - Schütz, Roman A1 - Kindzorra, Emanuel A1 - Schade, U. A1 - Kanngießer, B. A1 - Mantouvalou, I. A1 - Malzer, W. A1 - Weinberg, G. T1 - Chemical composition of the unique Temple Scroll and other fragments from the Dead Sea Scrolls T2 - IRUG9, 9th Biennial Conference of the Infrared and Raman Users Group CY - Buenos Aires, Argentina DA - 2010-03-03 PY - 2010 AN - OPUS4-21311 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hahn, Oliver A1 - Torge, Manfred A1 - Wiegner, Katharina A1 - Farke, M. T1 - Preventive conservation - adsorber materials for the reduction of harmful emissions T2 - COST D42 WGs 1/2/3 Meeting CY - Chalon-sur-Saône, France DA - 2010-04-24 PY - 2010 AN - OPUS4-21312 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Kupsch, Andreas A1 - Manke, I. A1 - Kardjilov, N. A1 - Arlt, Tobias A1 - Grothhausmann, Roman T1 - Rekonstruktion limitierter computertomographischer Datensätze von PEM-Brennstoffzellen mit DIRECTT T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-01 PY - 2010 AN - OPUS4-21314 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. T1 - Modellrekonstruktion unvollständiger computertomographischer Datensätze mit DIRECTT-Algortihmus T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21315 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Illerhaus, Bernhard A1 - Badde, Aurelia A1 - Berger, Ursula A1 - Michaelis, Matthias A1 - Onel, Yener T1 - Einsatz von mobilen Röntgenuntersuchungen im Museum, Zwei Fallbeispiele. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21316 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bantz, C. A1 - Koshkina, Olga A1 - Maskos, Michael T1 - Toxicity of synthetic nanoparticles exposed to the lung: Characterisation of siloxane based particles for cell studies T2 - SPP1313 Workshop CY - Jena, Germany DA - 2010-05-20 PY - 2010 AN - OPUS4-21318 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von der Ehe, Kerstin A1 - Jaunich, Matthias A1 - Wolff, Dietmar A1 - Böhning, Martin A1 - Goering, Harald T1 - Detection of structural changes of (U)HMW-PE induced by gamma irradiation T2 - Polymeric Materials 2010, 14th International Scientific Conference CY - Halle (Saale), Germany DA - 2010-09-15 PY - 2010 AN - OPUS4-21319 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank A1 - Droste, Bernhard A1 - Zencker, Uwe A1 - Komann, Steffen T1 - Reflektion der verkehrsrechtlichen Bauartprüfung des CASTOR HAW 28M aus Sicht der zuständigen Behörde T2 - Jahrestagung Kerntechnik 2010 CY - Berlin, Germany DA - 2010-05-04 PY - 2010 AN - OPUS4-21321 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Komann, Steffen T1 - Unterstützende Richtlinien und Normen in der sicherheitstechnischen Behälterprüfung T2 - 2. RAM-Behältersicherheitstage, BAM CY - Berlin, Germany DA - 2010-03-18 PY - 2010 AN - OPUS4-21322 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rosner, Martin T1 - Geochemical and instrumental fundamentals for accurate and precise strontium isotope data of food samples: comment on "determination of the strontium isotope ration by ICP-MS ginseng as a tracer of regional origin" (Choi et al., 2008) N2 - The strontium isotope composition of food samples has been successfully used to trace the provenance of both herbal and animal agricultural products. Adequately accurate and precise 87Sr/86Sr ratios, however, are key to unravel environmental and anthropogenic strontium contributions of specific growing areas. In a recently published analytical method in Food Chemistry by Choi et al. (2008) a demonstrably inadequate protocol for the determination of 87Sr/86Sr ratios of ginseng is presented. Based on well established geological and analytical fundamentals the 87Sr/86Sr ratios presented by Choi et al. (2008) are too inaccurate and imprecise to be used to trace the origin of the ginseng. Appropriate wet chemical separation techniques and mass spectrometric instrumentation enables the generation of 87Sr/86Sr data with very low expanded uncertainties (<0.05%, k = 2). Those high quality data allow the identification of even small strontium contributions of source reservoirs or physical and anthropogenic processes if diagnostic isotope compositions are present. KW - Strontium isotopes KW - Food provenance studies KW - TIMS KW - ICP-MS KW - Analytical accuracy KW - Mass spectrometry PY - 2010 DO - https://doi.org/10.1016/j.foodchem.2010.01.019 SN - 0308-8146 VL - 121 IS - 3 SP - 918 EP - 921 PB - Elsevier CY - Amsterdam [u.a.] ; Jena AN - OPUS4-21325 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Baier, Jennifa A1 - Beck, Uwe A1 - Lange, Thorid A1 - Sahre, Mario A1 - Mollath, G. A1 - Spille-Kohoff, A. T1 - Effect of Process Conditions on Microscopic Structure and Macroscopic Properties of Zinc-based Coatings T2 - ICMCTF CY - San Diego, CA, USA DA - 2010-04-24 PY - 2010 AN - OPUS4-21276 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Seefeld, T. A1 - Gumenyuk, Andrey T1 - Prozessverständnis beim Strahlschweißen von Aluminium T2 - DVS-Forschungsseminar - Strahlschweißen von Aluminium CY - Stuttgart, Deutschland DA - 2010-01-28 PY - 2010 SN - 978-3-87155-591-6 SN - 0418-9639 VL - 266 SP - 45 EP - 51 PB - DVS Media GmbH AN - OPUS4-21277 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Influence of the interface on the strength of fiber reinforced polymers N2 - The debonding of fibers under mixed-mode loading is studied on model composites containing fibers with different orientations with respect to the loading direction. The spacing of the fibers is large, accordingly no significant fiber interaction takes place. For any fiber orientation, interfacial debonding occurs, even though at different load levels. Only for the low off-axis angle, additional fiber fracture is found. Using a rectangular specimen, the interface crack starts at the edges propagating into the center at low speed. In the first phase, only the central part of the interface debonds. After the whole fiber is debonded, the crack propagates in circumferential direction. The superimposition of fiber breakage and debonding shows that the restriction of two potential failure planes - perpendicular or parallel to the fibers - has to be put in question. T2 - 14th European conference on composite materials CY - Budapest, Hungary DA - 2010-06-07 KW - Strength KW - Composites KW - Crack propagation PY - 2010 IS - Paper 708-ECCM14 SP - 1 EP - 10 AN - OPUS4-21278 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schwarz, Silke T1 - Technische Regel: Kennzeichnung von explosionsgefährlichen Stoffen und Sprengzubehör T2 - 5. Informationsveranstaltung Sprengstoffe und Pyrotechnik, BAM CY - Berlin, Germany DA - 2010-05-06 PY - 2010 AN - OPUS4-21280 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von Oertzen, Alexander T1 - EG-Baumusterprüfung von pyrotechnischen Gegenständen T2 - 32. Informationstagung Sprengtechnik CY - Siegen, Germany DA - 2010-04-09 PY - 2010 AN - OPUS4-21281 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dutschke, Andreas A1 - Kurth, Lutz A1 - Lohrer, Christian A1 - Kaiser, Michael A1 - Stattaus, Kim A1 - Kästorf, Nadine T1 - Emissionsmessungen bei der Pyronale 2009 T2 - Seminarreihe Partikelmessgeräte in Berlin und Augsburg 2010 CY - Berlin, Germany DA - 2010-04-22 PY - 2010 AN - OPUS4-21282 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lohrer, Christian A1 - Berner, Joachim T1 - Anlagen und Geräte zur Erzeugung von Spezialeffekten T2 - 5. Informationstagung Sprengstoffe und Pyrotechnik, BAM CY - Berlin, Germany DA - 2010-05-06 PY - 2010 AN - OPUS4-21283 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kurth, Lutz A1 - Lohrer, Christian T1 - Ausgewählte Probleme beim Abbrennen von Feuerwerk und Stand der Normung im Bereich Pyrotechnik T2 - 5. Informationstagung Sprengstoffe und Pyrotechnik, BAM CY - Berlin, Germany DA - 2010-05-06 PY - 2010 AN - OPUS4-21284 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dutschke, Andreas A1 - Lohrer, Christian A1 - Kurth, Lutz T1 - Systematische Emissionsanalyse von Indoorpyrotechnik mit einer eigens dafür entwickelten Messapparatur T2 - 12. Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik, BAM/PTB CY - Berlin, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-21285 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens A1 - Burkert, Annette T1 - Legierungsgehalt oder Oberfläche - Was bestimmt die Beständigkeit nichtrostender Stähle? T2 - Tagung der Metall-Innung BW, Fa. Zweygart CY - Gärtringen, Germany DA - 2010-05-27 PY - 2010 AN - OPUS4-21256 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heyn, Andreas T1 - Korrosion empfindlich messen - Was haben wir erreicht? T2 - Arbeitskreissitzung "Prüf- und Untersuchungsverfahren" und "Corrosion Monitoring" der GfKORR CY - Frankfurt am Main, Germany DA - 2010-04-22 PY - 2010 AN - OPUS4-21257 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas T1 - Application of Duplex Stainless Steels in Civil Engineering T2 - Duplex Stainless Steels Conference & Exhitbition 2010 CY - Beaune, France DA - 2010-10-13 PY - 2010 AN - OPUS4-21258 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Faulhaber, Armin A1 - Isecke, Bernd A1 - Eichler, Thorsten A1 - Weidauer, Kathleen T1 - Investigations on the Repassivation of Reinforcing Steel in Chloride Containing Pore Water Solution in Consequence of Decreasing Chloride Concentration T2 - EIS 2010 - 8th International Symposium on Electrochemical Impedance Spectroscopy CY - Carvoeiro, Portugal DA - 2010-06-06 PY - 2010 AN - OPUS4-21259 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weber, Mike A1 - Wille, Frank A1 - Ballheimer, Viktor A1 - Musolff, André T1 - Numerische Analyse der 1-m-Fallprüfung auf einen Stahldorn T2 - Jahrestagung Kerntechnik 2010 CY - Berlin, Germany DA - 2010-05-04 PY - 2010 AN - OPUS4-21260 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hanelt, Sven A1 - Meyer-Plath, Asmus A1 - Friedrich, Jörg F. T1 - Systematic study of Lewis acid-catalyzed bromination and bromoalkylation of multi-walled carbon nanotubes T2 - International Meeting on the Chemistry of Nanotubes and Graphene "ChemOnTubes" CY - Arcachon, France DA - 2010-04-11 PY - 2010 AN - OPUS4-21261 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rücker, Werner A1 - Savidis, S. T1 - Übersicht über das Forschungsvorhaben "Anwendungsorientiertes Bemessungs- und Überwachungsmodell für Pfahlgründungen von Offshore-Windenergieanlagen unter zyklischer Belastung" T2 - Workshop "Gründung von Offshore-Windenergieanlagen" CY - Karlsruhe, Germany DA - 2010-02-22 PY - 2010 AN - OPUS4-21262 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe A1 - Reiners, Georg A1 - Weise, Matthias A1 - Hielscher, Stefan A1 - Lerche, D. A1 - Rietz, U. T1 - Qualitative Adhesion Testing of Metallic Films on Polymers by means of the Centrifuge Test T2 - 18. Neues Dresdner Vakuumtechnisches Kolloquium CY - Dresden, Germany DA - 2010-10-21 PY - 2010 AN - OPUS4-21263 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Influence of the interface on the strength of fiber reinforced polymers T2 - 14th European Conference on Composite Materials, ECCM 14 CY - Budapest, Hungary DA - 2010-07-07 PY - 2010 AN - OPUS4-21264 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe A1 - Reiners, Georg A1 - Weise, Matthias A1 - Hielscher, Stefan A1 - Lerche, D. A1 - Rietz, U. T1 - Qualitative Adhesion Testing of Coatings: Pull-off vs. Centrifuge Test T2 - 24th International Conference on Surface Modification Technologies CY - Dresden, Germany DA - 2010-09-07 PY - 2010 AN - OPUS4-21265 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mantion, Alexandre A1 - Haase, A. A1 - Tentschert, J. A1 - Jungnickel, H. A1 - Graf, P. A1 - Draude, F. A1 - Plendl, J. A1 - Goetz, M. E. A1 - Arlinghaus, H. F. A1 - Luch, A. T1 - Cytotoxicity of model silver nanoparticles in human macrophages T2 - Post-satellite Meeting Eurotox 2009 CY - Dresden, Germany DA - 2010-04-23 PY - 2010 AN - OPUS4-21250 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Perret, William T1 - Case study for welding simulation in the automotive industry T2 - IIW-Select Committee "Automotive an Road transport" (IIW-Doc. No. SC-Auto-34-10) - Intermediate Meeting CY - Berlin, Germany DA - 2010-04-21 PY - 2010 AN - OPUS4-21251 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cuéllar, Pablo A1 - Baeßler, Matthias A1 - Rücker, Werner T1 - Investigaciones Numéricas y Experimentales para la Cimentación Offshore de Generadores Eólicos en el Mar del Norte T2 - Workshop "Quincena de la Ingenieria en la E.S.I., Escuela Superior de Ingenieria (ESI), Universidad de Cádiz" CY - Cadiz, Spain DA - 2010-03-11 PY - 2010 AN - OPUS4-21252 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cuéllar, Pablo A1 - Baeßler, Matthias A1 - Georgi, Steven A1 - Rücker, Werner T1 - Special issues for the coupled transient simulation of laterally loaded piles and novel experimental findings. T2 - Workshop "Gründung von Offshore-Windenergieanlagen" CY - Karlsruhe, Germany DA - 2010-02-22 PY - 2010 AN - OPUS4-21253 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wilrich, Cordula A1 - Fiedler, T. T1 - Anpassung der Seveso-II-Richtlinie an die Gefahrenklassen gemäß GHS/CLP-Verordnung T2 - Behörden-Erfahrungsaustausch BAM und UBA CY - Berlin, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21254 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Werner, Jan A1 - Pagenkopf, Marion T1 - Zuständige Behörde und was nun? Verordnungen handhabbar gestalten T2 - Behörden-ERFA, BAM CY - Berlin, Germany DA - 2010-05-10 PY - 2010 N1 - Geburtsname von Pagenkopf, Marion: Nitsche, M. - Birth name of Pagenkopf, Marion: Nitsche, M. AN - OPUS4-21255 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neitsch, Marcel T1 - Neue Berichtsunterlagen für die Überwachung der Herstellung von Verpackungen aus Kunststoff, Folie oder Gewerbe T2 - INQÜ - AK Kunststoffe/Folien/Gewerbe CY - Berlin, Germany DA - 2010-04-28 PY - 2010 AN - OPUS4-21296 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Spaltmann, Dirk A1 - von Gablenz, A. A1 - Woydt, Mathias T1 - CO2-neutral fuels and lubricants based on second generation oils such as Jatropha KW - 2nd generation bio-fuels KW - Jatropha KW - Lesquerella KW - VHOSO KW - SRV KW - Friction KW - Wear KW - HFRR KW - HTHS KW - Viscosity PY - 2010 SN - 1546-962X VL - 7 IS - 4 / Paper JAI102549 SP - 1 EP - 12 PB - American Society for Testing and Materials CY - West Conshohocken, Pa. AN - OPUS4-21297 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Takao, S. A1 - Takao, K. A1 - Kraus, Werner A1 - Emmerling, Franziska A1 - Scheinost, A.C. A1 - Bernhard, G. A1 - Henning, C. T1 - First Hexanuclear U(IV) and Th(IV) Formate Complexes - Structure and Stability Range in Aqueous Solution T2 - 3rd EuCheMS Chemistry Congress CY - Nuremberg, Germany DA - 2010-08-29 PY - 2010 AN - OPUS4-21298 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wytrykus, Nancy T1 - Informationen für die Überwachungsstellen T2 - INQÜ - AK Kunststoff/Folien/Gewerbe CY - Berlin, Germany DA - 2010-04-28 PY - 2010 AN - OPUS4-21299 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eiben, Mario A1 - Tscheuschner, Frank T1 - Workshop zur Datenbank GEFAHRGUT im Rahmen des Behörden-Erfahrungsaustauschs T2 - Behörden-ERFA CY - Berlin, Germany DA - 2010-05-12 PY - 2010 AN - OPUS4-21300 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Körner, Ursula T1 - Qualitätssicherung als behördliche Aufgabe T2 - Behörden-Erfahrungsaustausch vom 10. Mai bis 12. Mai 2010 CY - Berlin, Germany DA - 2010-05-12 PY - 2010 AN - OPUS4-21301 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Körner, Ursula T1 - Qualitätssicherung und Überwachung anhand von Standardvorlagen T2 - INQÜ-AK Kunststoff/Folie/Gewerbe bei der Herstellung von Gefahrgutverpackungen CY - Berlin, Germany DA - 2010-04-28 PY - 2010 AN - OPUS4-21302 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Ulrich, Armin T1 - Dangerous Goods Packaging Testing T2 - COSTHA Annual Forum CY - St. Petersburg, FL, USA DA - 2010-03-25 PY - 2010 AN - OPUS4-21303 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Torge, Manfred T1 - Konservierung mittelalterlicher Glasmalerei im Kontext spezieller materieller und umweltbedingter Gegebenheiten T2 - Abschlussveranstaltung zum Projekt der Kulturstiftung des Bundes (KUR) CY - Erfurt, Germany DA - 2010-04-28 PY - 2010 AN - OPUS4-21305 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN ED - Boulmer-Leborgne, C. ED - Dinescu, G. ED - Krüger, Jörg ED - Orlando, S. ED - Habermeier, H.-U. T1 - Topical Issue: Laser and Plasma Processing for Advanced Materials / Journal of Optoelectronics and Advanced Materials, Vol. 12, No. 3, March 2010 N2 - Laser and plasma processing of materials is a rapidly growing field in fundamental science and materials technology requiring both a multidisciplinary approach and a wide-ranging knowledge. The topical issue “Laser and plasma processing for advanced materials” of the Journal of Optoelectronics and Advanced Materials covers a number of recent research highlights. The production of thin functionalized films, nanoparticles and nanocomposites using pulsed laser ablation (PLA) and deposition (PLD) or plasma treatment is discussed in a number of papers. Additionally, experiments using matrix assisted pulsed laser evaporation (MAPLE) are described. It is shown in this book that nanoparticles are generated and/or processed by laser or plasma interaction in very different environments ranging from gaseous and liquid to solid phase. Material properties change if the particle size is reduced below a critical limit allowing e.g. optical, electronic, biomedical, and environmental applications. Micro- and nanostructuring of surfaces (2D) and within the bulk of transparent materials (3D) is presented in various articles. In many cases, ultrashort laser pulses were applied. Furthermore, nanoparticles interacting with laser radiation can be used for nanostructuring purposes. Apart from experimental investigations, numerical modeling of the interaction of femtosecond laser pulses with materials has also been performed to understand structure formation theoretically. Especially for bio-functionalization, selective deposition of sensitive materials (e.g. proteins, cells) on surfaces is needed. A sophisticated process used for this purpose is known as laser induced forward transfer (LIFT). Recent findings regarding the LIFT method are depicted in this issue. Laser annealing of implanted dopants and thin films aiming to enhance structural and electrical properties, sensor dicing by laser radiation, and laser or plasma surface modification for the improvement of solar cells or polymer wettability change are but a few of the subjects focusing on applied research. Additionally, hybrid processes combining plasma spraying and laser-induced melting to control microstructure of coatings are introduced. Last but not least, achievements regarding analytical techniques are outlined. Laser induced breakdown spectroscopy (LIBS) make up a large part of this class. Additionally, the contributions to optical emission spectroscopy and mass spectrometry of plasma processes are significant. KW - Pulsed laser ablation KW - Evaporation KW - Deposition KW - Laser and plasma interaction KW - Laser micro- and nanostructuring KW - Nanoparticles KW - Laser induced forward transfer KW - Laser surface modifications KW - Plasma treatment PY - 2010 SN - 1454-4164 SP - 421 EP - 789 PB - INOE & INFM CY - Bucharest AN - OPUS4-21619 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Winkler, T. A1 - Hoenig, E. A1 - Huber, G. A1 - Janssen, R. A1 - Fritsch, D. A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Morlock, M.M. A1 - Schilling, A.F. T1 - Osteoclastic bioresorption of biomaterials: Two- and three-dimensional imaging and quantification N2 - Purpose: Bioresorbable materials have been developed in the hope that the body will replace them with newly formed tissue. The first step of this remodeling process in bone is the bioresorption of the material by osteoclasts. The aim of this study was to analyze osteoclastic resorption of biomaterials in vitro using the commonly used two-dimensional methods of light-microscopy (LM) and scanning electron microscopy (SEM) in comparison with infinite focus microscopy (IFM), a recently developed imaging method allowing for three-dimensional surface analysis. Methods: Human hematopoietic stem cells were cultivated in the presence of the cytokines M-CSF and RANK-L for 4 weeks directly on dentin and a calcium phosphate cement. Osteoclast development was surveyed with standard techniques. After removal of the cells, resorption was characterized and quantified by LM, SEM and IFM. Results: Osteoclast cultures on the biomaterials presented the typical osteoclast-specific markers. On dentin samples LM, SEM as well as IFM allowed for discrimination of resorption. Quantification of the resorbed area showed a linear correlation between the results (LM vs. SEM: r=0.996, p=0.004; SEM vs. IFM: r=0.989, p=0.011; IFM vs. LM: r=0.995). It was not possible to demarcate resorption pits on GB14 using LM or SEM. With IFM, resorption on GB14 could be visualized and quantified two- and three-dimensionally. KW - Biomaterial KW - Three-dimensional KW - IFM KW - Osteoclast KW - Dentin KW - Calcium phosphate PY - 2010 SN - 0391-3988 VL - 33 IS - 4 SP - 198 EP - 203 PB - Wichtig Ed. CY - Milano [u.a.] AN - OPUS4-21621 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Appelhans, Dietmar A1 - Oertel, U. A1 - Mazzeo, R. A1 - Komber, H. A1 - Hoffmann, J. A1 - Weidner, Steffen A1 - Brutschy, B. A1 - Voit, B. A1 - Ottaviani, M.F. T1 - Dense-shell glycodendrimers: UV/Vis and electron paramagnetic resonance study of metal ion complexation N2 - The development of dendritic metal ion carrier systems for use in a biological environment is a challenging task as the carrier system must possess multiple features (e.g. a protective shell for metal decomplexation, targeting functions, metal-intradendrimer complexes, etc.) to substitute for the function of metal proteins in processes such as copper metabolism. Thus, Cu(II) complexation by a series of poly(propyleneimine) glycodendrimers ranging up to the fifth generation that have either a dense maltose or maltotriose shell was investigated by UV/Vis spectroscopy and electron paramagnetic resonance (EPR). As a necessary step towards potential biological application, we elucidated the complexation capacity, location of the Cu(II)-dendrimer complexes and the Cu(II) coordination sphere in the dendritic environment. A generation-dependent Cu(II) complexation was found. Furthermore, analysis of the EPR spectra revealed that internal and external Cu(II) coordination and the symmetry (axial and rhombic) of the generated complexes depend on the oligosaccharide shell, dendrimer generation and the relative concentrations of Cu(II) and the dendrimers. Both axial and rhombic symmetries are generation dependent, but also distort with increasing generation number. External coordination of Cu(II) is supported by sugar groups and water molecules. Finally, a third-generation dendrimer with a maltose shell was used to explore the general complexation behaviour of the dendritic poly(propyleneimine) scaffold towards different metal ions [Cu(II), Ag(I), VO(IV), Ni(II), Eu(III) and UO2(VI)]. KW - Glycodendrimers KW - Metal ion complexation KW - Metal ion-intradendrimer complexes KW - Electron paramagnetic resonance study PY - 2010 DO - https://doi.org/10.1098/rspa.2009.0107 SN - 1364-5021 SN - 0962-8444 SN - 0080-4630 SN - 0950-1207 SN - 1471-2946 VL - 466 SP - 1489 EP - 1513 CY - London, UK AN - OPUS4-21622 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weidner, Steffen A1 - Trimpin, s. T1 - Mass Spectrometry of Synthetic Polymers KW - Polymere KW - Massenspektrometrie KW - MALDI PY - 2010 DO - https://doi.org/10.1021/ac101080n SN - 0003-2700 SN - 1520-6882 VL - 82 IS - 12 SP - 4811 EP - 4829 PB - American Chemical Society CY - Washington, DC AN - OPUS4-21623 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Liehr, Sascha A1 - Nöther, Nils A1 - Krebber, Katerina T1 - Incoherent optical frequency domain reflectometry and distributed strain detection in polymer optical fibers N2 - We present, to our knowledge for the first time, the possibility of measuring the backscatter signal of perfluorinated polymer optical fibers (POF) using an incoherent optical frequency domain reflectometry (OFDR) technique. The OFDR setup is described and it is shown that the dynamic range and measurement speed are superior to standard OTDR systems. It is shown for the first time that distributed detection of strain in POF is possible using the OFDR technique. KW - Optical frequency domain reflectometry KW - OFDR KW - OTdr KW - Polymer optical fibers KW - POF KW - Fiber sensors KW - Distributed sensors KW - Strain sensors PY - 2010 DO - https://doi.org/10.1088/0957-0233/21/1/017001 SN - 0957-0233 SN - 1361-6501 VL - 21 IS - 1 SP - 017001-1 - 017001-4 PB - IOP Publ. Ltd. CY - Bristol AN - OPUS4-21625 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Rücker, Werner A1 - Faber, M.H. T1 - Support structure reliability of offshore wind turbines utilizing an adaptive response surface method T2 - OMAE 2010 - 29th International conference on ocean, offshore and arctic engineering CY - Shanghai, China DA - 2010-06-06 PY - 2010 IS - OMAE2010-20546 SP - 1 EP - 10 AN - OPUS4-21666 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Marya, S. A1 - Gumenyuk, Andrey T1 - Overview of recent advances in welding - Focusing on friction stir welding & laser hybrid welding KW - Friction stir welding KW - Laser-hybrid welding PY - 2010 SN - 0021-4787 VL - 79 IS - 4 SP - 292 EP - 298 PB - Gakkai CY - T¯oky¯o AN - OPUS4-21667 LA - jpn AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Noll, Matthias A1 - Klose, M. A1 - Conrad, R. T1 - Effect of temperature change on the composition of the bacterial and archaeal community potentially involved in the turnover of acetate and propionate in methanogenic rice field soil N2 - The microbial community structure was investigated together with the path of methane production in Italian rice field soil incubated at moderate (35 °C) and high (45 °C) temperature using terminal restriction fragment length polymorphism and stable isotope fractionation. The structure of both the archaeal and bacterial communities differed at 35 °C compared with 45 °C, and acetoclastic and hydrogenotrophic methanogenesis dominated, respectively. Changing the incubation of the 45 °C soil to different temperatures (25, 30, 35, 40, 45, 50 °C) resulted in a dynamic change of both microbial community structure and stable isotope fractionation. In all treatments, acetate first accumulated and then decreased. Propionate was also transiently produced and consumed. It is noteworthy that acetate was also consumed at thermophilic conditions, although archaeal community composition and stable isotope fractionation indicated that acetoclastic methanogenesis did not operate. Instead, acetate must have been consumed by syntrophic acetate oxidizers. The transient accumulation and subsequent consumption of acetate at thermophilic conditions was specifically paralleled by terminal restriction fragments characteristic for clostridial cluster I, whereas those of clostridial clusters I and III, Acidaminococcaceae and Heliobacteraceae, paralleled the thermophilic turnover of both acetate and propionate. KW - Syntrophic acetate oxidation KW - Thermophilic microbial community KW - Terminal restriction fragment length polymorphism KW - Bacteria KW - Archaea KW - Structure and function KW - Methanogenic archael community KW - Temperature shift PY - 2010 DO - https://doi.org/10.1111/j.1574-6941.2010.00883.x SN - 0168-6496 SN - 1574-6941 VL - 73 IS - 2 SP - 215 EP - 225 PB - Blackwell Publishing CY - Oxford AN - OPUS4-21671 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nooke, Alida A1 - Beck, Uwe A1 - Hertwig, Andreas A1 - Krause, Andreas A1 - Krüger, Hannes A1 - Lohse, Volkmar A1 - Negendank, Detlef A1 - Steinbach, J. T1 - On the application of gold based SPR sensors for the detection of hazardous gases N2 - A gas sensor system based on the surface plasmon resonance (SPR) effect in a 44 nm Au layer was studied. The usability of this sensor system was investigated for several analyte gases and gas mixtures which are interesting due to their flammability, toxicity or greenhouse effect. The SPR effect of gold was measured in nitrogen and compared with the gaseous alkane series which caused a shift of the position of the SPR effect. For in situ measurements, the phase shift Δ at the SPR angle (ψ minimum) in the analyte gas mixtures was measured for investigated gases in comparison with nitrogen. With this method, detection limits of different gases could be determined, which lie in a range interesting for safety engineering. Furthermore the aging effect of the gold layers which leads to loss in sensitivity of the sensor was investigated. KW - Ellipsometry KW - SPR effect KW - Gas sensing KW - Gold layer PY - 2010 DO - https://doi.org/10.1016/j.snb.2010.05.061 SN - 0925-4005 SN - 1873-3077 VL - 149 IS - 1 SP - 194 EP - 198 PB - Elsevier CY - Amsterdam [u.a.] AN - OPUS4-21673 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hertel, Horst A1 - Posacki, Erol A1 - Plarre, Rüdiger T1 - Directional orientation of Reticulitermes flavipes (Isoptera: Rhinotermitidae) N2 - Subterranean termites moving in the peripheral tubular network of their foraging area need to distinguish the trail direction. In a natural gallery or tunnel network of Reticulitermes flavipes the branches at bifurcations generally have an acute angle between them. the resulting obtuse angle from the main trail leading into a branch is preferred by commuting termites. In experiments with artificial gallery forks, termites returning from a food source only neglected the trail junction leading to the nest and preferred the trail to a second food source if the angle to the nest was acute. A right angle to the nest was preferred over a straight way leading to a second food source. This preference to the nest increased when the three branches at trifurcations were arranged equi-angular. This preferred orientation could be attributed to attracting odours from close-by gallery material. Additionally, R. flavipes moved more slowly towards a food source consisting of pine wood than on the way back to the nest, as was shown in artificial one-way galleries. However, the significance of this speed difference remains uncertain because the speed of a homing termite in an artificially reversed trail does not slow down to the speed of a food foraging termite. KW - Termites KW - Orientation KW - Foraging KW - Tunnel network PY - 2010 SN - 0361-6525 VL - 56 IS - 1 SP - 223 EP - 233 PB - California State University CY - Chico, Calif. AN - OPUS4-21674 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Nöther, Nils A1 - Wendt, Mario A1 - Wosniok, Aleksander T1 - Protection of critical infrastructure using fiber optic sensors embedded in technical textiles N2 - Terrorists and criminals more and more attack and destroy important infrastructures like routes, railways, bridges, tunnels, dikes and dams, important buildings. Therefore, reliable on-line and long-term monitoring systems are required to protect such critical infrastructures. Fiber optic sensors are well-suited for that. They can be installed over many kilometers and are able to measure continuously distributed strain, pressure, temperature and further mechanical and physical quantities. The very tiny optical fibers can be integrated into structures and materials and can provide information about any significant changes or damages of the structures. These so-called smart materials and smart structures are able to monitor itself or its environment. Particularly smart technical textiles with embedded fiber optic sensors have become very attractive because of their high importance for the structural health monitoring of geotechnical and masonry infrastructures. Such textiles are usually used for reinforcement of the structures; the embedded fiber optic sensors provide information about the condition of the structures and detect the presence of any damages and destructions in real time. Thus, critical infrastructures can be preventively protected. The paper will introduce this innovative field and will present the results achieved within several German and European projects. T2 - Fiber optic sensors and applications VII CY - Orlando, FL, USA DA - 2010-04-07 KW - Distributed sensors KW - Brillouin sensors KW - Polymer optical fibers (POF) KW - POF sensors KW - POF OTDR KW - Strain sensors KW - Technical textiles KW - Geotextiles KW - Fiber optic sensors PY - 2010 SN - 9780819481412 DO - https://doi.org/10.1117/12.851013 SN - 0277-786X VL - 7677 IS - 767707 SP - 1 EP - 14 PB - SPIE, the International Society for Optical Engineering CY - Bellingham, Wash. AN - OPUS4-21675 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Krebber, Katerina T1 - A novel technique for quasi-distributed and dynamic length change measurement in optical fibers N2 - We present a novel technique to measure length changes between multiple reflection points in optical fibers. The technique allows for dynamic measurement up to 1kHz and a resolution better than 1µm. T2 - International conference "Optical sensors" CY - Karlsruhe, Germany DA - 2010-06-21 PY - 2010 DO - https://doi.org/10.1364/SENSORS.2010.STuB5 IS - STuB5 SP - 1 EP - 2 AN - OPUS4-21626 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Eichler, Thorsten A1 - Isecke, Bernd A1 - Wilsch, Gerd A1 - Faulhaber, Armin A1 - Weidauer, Kathleen ED - Castro-Borges, P. ED - Moreno, E.I. ED - Sakai, K. ED - Gjorv, O.E. ED - Banthia, N. T1 - The effect of chloride depletion on the corrosion state of steel in alkaline environment T2 - CONSEC`10 - 6th International conference on concrete under severe conditions CY - Mérida, Yucatán, Mexico DA - 2010-06-07 KW - Thermal sprayed zinc KW - Cathodic protection KW - Steel in concrete KW - Multi-storey-car-park PY - 2010 SN - 978-0-415-59316-8 VL - 2 SP - 1115 EP - 1121 PB - Taylor & Francis CY - London, UK AN - OPUS4-21627 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - de Andrade Silva, F. A1 - Williams, J. J. A1 - Müller, Bernd R. A1 - Hentschel, Manfred P. A1 - Portella, Pedro Dolabella A1 - Chawla, N. T1 - Three-dimensional microstructure visualization of porosity and Fe-rich inclusions in SiC particle-reinforced Al alloy matrix composites by X-ray synchrotron tomography N2 - Microstructural aspects of composites such as reinforcement particle size, shape, and distribution play important roles in deformation behavior. In addition, Fe-rich inclusions and porosity also influence the behavior of these composites, particularly under fatigue loading. Three-dimensional (3-D) visualization of porosity and Fe-rich inclusions in three dimensions is critical to a thorough understanding of fatigue resistance of metal matrix composites (MMCs), because cracks often initiate at these defects. In this article, we have used X-ray synchrotron tomography to visualize and quantify the morphology and size distribution of pores and Fe-rich inclusions in a SiC particle-reinforced 2080 Al alloy composite. The 3-D data sets were also used to predict and understand the influence of defects on the deformation behavior by 3-D finite element modeling. KW - Synchrotron radiation KW - X-ray tomography KW - X-ray refraction KW - Analyser based imaging KW - Metal matrix composite (MMC) KW - Fatigue PY - 2010 DO - https://doi.org/10.1007/s11661-010-0260-0 SN - 1073-5623 SN - 1543-1940 VL - 41 IS - 8 SP - 2121 EP - 2128 PB - The Minerals, Metals and Materials Society CY - Warrendale AN - OPUS4-21629 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pistol, Klaus A1 - Weise, Frank T1 - Novel investigation of the behaviour of polypropylene fibres in high strength concrete at high temperatures T2 - 8th fib International PhD symposium in civil engineering CY - Lyngby, Denmark DA - 2010-06-20 KW - Polypropylene fibres KW - Explosive spalling KW - High strength concrete KW - Computer tomography KW - Scanning electron microscopy PY - 2010 SN - 9788778773012 SP - 407 EP - 412 AN - OPUS4-21630 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Voland, Katja A1 - Weise, Frank T1 - Application of innovative measurement techniques for monitoring of ASR induced damage processes in concrete T2 - 8th fib International PhD symposium in civil engineering CY - Lyngby, Denmark DA - 2010-06-20 KW - Alkali-silica reaction KW - 40°C fog chamber KW - 60°C concrete prism test KW - Acoustic emission KW - Ultrasonic velocity KW - mu-3D-CT PY - 2010 SN - 9788778773012 SP - 629 EP - 634 AN - OPUS4-21631 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bovtun, Viktor Petrovic A1 - Bartusch, Jürgen A1 - Erhard, Anton A1 - Kreutzbruck, Marc A1 - Yakymenko, Y. T1 - Nonlinear electromechanical properties of the polypropylene ferroelectrets T2 - Structual and ferroelectric phase transitions CY - Telc, Czech Republic DA - 2010-05-24 PY - 2010 AN - OPUS4-21632 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kreutzbruck, Marc A1 - Thomas, Hans-Martin A1 - Reimund, Verena A1 - Blome, Mark A1 - Pelkner, Matthias T1 - Magnetic Response Field of Spherical Cefects within Conductive Components T2 - ENDE 2010 CY - Szczecin, Poland DA - 2010-06-13 PY - 2010 AN - OPUS4-21633 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaal, Mate A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Brekow, Gerhard T1 - Entwicklung von Luftultraschall-Sensoren mit geringer akustischer Impedanz T2 - 15. ITG-/GMA-Fachtagung "Sensoren und Messsysteme 2010" CY - Nuremberg, Germany DA - 2010-05-18 PY - 2010 AN - OPUS4-21634 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schenk, Gottfried A1 - Boehm, Rainer A1 - Brackrock, Daniel A1 - Kreutzbruck, Marc A1 - Joswig, Michael A1 - Maxam, Klaus A1 - Schuster, Volker T1 - Untersuchungen zum Einfluss von geometrie- und Temperaturabweichungen bei der Stangenprüfung mit Ultraschall-Gruppenstrahlertechnik T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21635 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sarmiento Klapper, Helmuth A1 - Bäßler, Ralph A1 - Burkert, Andreas T1 - Recent progress in the qualification of materials used in geothermal energy conversion systems T2 - 1st International conference on materials for energy CY - Karlsruhe, Germany DA - 2010-07-04 KW - Korrosion KW - Geothermie KW - CrNi-Stahl KW - Ni-Basislegierung KW - Duplexstahl PY - 2010 SN - 978-3-89746-117-8 SP - 158 EP - 159 AN - OPUS4-21676 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gross, Thomas A1 - Pippig, F. A1 - Merz, B. A1 - Merz, R. A1 - Vohrer, U. A1 - Mix, Renate A1 - Steffen, H. A1 - Bremser, Wolfram A1 - Unger, Wolfgang T1 - Determination of OH groups at plasma oxidised poly(propylene) by TFAA chemical derivatisation XPS: an inter-laboratory comparison N2 - A first inter-laboratory comparison was conducted to demonstrate and document the capability of interested laboratories to measure the fraction of C—OH species on a plasma oxidised poly(propylene) sample by using a chemical derivatisation XPS approach. This report presents the results from that inter-laboratory comparison and includes the data received for the measured values and their associated standard deviations of laboratory means, at a 95% confidence level. The measurements were guided by a protocol developed within the group before and summarised shortly in the paper. Standard deviations that may characterise the state-of-the-art for the nominally simple and rather often practised case of TFAA chemical derivatisation XPS of C—OH species on a plasma oxidised polyolefin surface are calculated following ISO 5725-2:1994. The main conclusion is that the associated degree of equivalence reached by the participating laboratories in this comparison is still low. Further research to improve chemical derivatisation XPS protocols is mandatory. KW - Chemical derivatisation KW - ESCA/XPS KW - Inter-laboratory comparison KW - Photoelectron spectroscopy (PES) KW - Poly(propylene) (PP) PY - 2010 DO - https://doi.org/10.1002/ppap.200900142 SN - 1612-8850 SN - 1612-8869 VL - 7 IS - 6 SP - 494 EP - 503 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-21678 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Huber, Alexandra A1 - Jäger, Christian A1 - Hanelt, Sven A1 - Meyer-Plath, Asmus T1 - Festkörper-NMR-Untersuchungen an mehrwandigen Kohlenstoffanoröhren T2 - Festkörper-NMR-Methoden und Anwendungen in der Materialforschung, Seminar der Universität Tübingen CY - Bad Hindelang, Germany DA - 2010-07-18 PY - 2010 AN - OPUS4-21681 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Huber, Alexandra A1 - Hanelt, Sven A1 - Meyer-Plath, Asmus A1 - Jäger, Christian T1 - Solid State NMR study of multiwalled carbon nanotubes T2 - GDCh Fachgruppentagung "Magnetische Resonanzspektroskopie" CY - Münster, Germany DA - 2010-09-20 PY - 2010 AN - OPUS4-21682 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfennig, A. A1 - Kranzmann, Axel ED - Brebbia, C.A. ED - Longhurst, J.W.S. T1 - The role of pit corrosion in engineering the carbon storage site Ketzing, Germany T2 - Air pollution XVIII CY - Kos, Greece DA - 2010-06-21 KW - CO2-Speicherung KW - Ketzin KW - Korrosion KW - Steel KW - Pipeline KW - Pit corrosion KW - CCS KW - CO2-injection KW - CO2-storage PY - 2010 SN - 978-1-84564-450-5 DO - https://doi.org/10.2495/AIR100101 SN - 1746-448X SN - 1734-3541 SP - 109 EP - 119 PB - WIT Press AN - OPUS4-21683 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfennig, A. A1 - Linke, B. A1 - Kranzmann, Axel T1 - Predicting the long term corrosion behaviour of pipe steels used at the CCS-site Ketzing, Germany in laboratory CO2-saturated saline aquifer CCS-environment T2 - First international conference on materials for energy CY - Karlsruhe, Germany DA - 2010-07-04 KW - CCS KW - Corrosion KW - Steels KW - Injection pipe PY - 2010 SN - 978-3-89746-117-8 IS - Paper 1067 SP - 1005 EP - 1007 AN - OPUS4-21684 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von Chrzanowski, Lars A1 - Beckmann, Jörg A1 - Marchetti, Barbara A1 - Ewert, Uwe A1 - Schade, U. T1 - Capability of terahertz-wave instrumentation for non destructive testing of liquids T2 - 10th European conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 KW - Terahertz PY - 2010 UR - http://www.ndt.net/article/ecndt2010/reports/1_05_16.pdf IS - Paper 4.02.18 SP - 1 EP - 8 AN - OPUS4-21685 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bonse, Jörn A1 - Sokolowski-Tinten, K. A1 - Barty, A. A1 - Boutet, S. A1 - Shymanovich, U. A1 - Chapman, H. N. A1 - Bogan, M. A1 - Marchesini, S. A1 - Hau-Riege, S. A1 - Stojanovic, N. A1 - Rosandi, Y. A1 - Urbassek, H. M. A1 - Tobey, R. A1 - Ehrke, H. A1 - Cavalleri, A. A1 - Düsterer, S. A1 - Redlin, H. A1 - Frank, M. A1 - Bajt, S. A1 - Schulz, J. A1 - Seibert, M. A1 - Hajdu, J. A1 - Treusch, R. A1 - Bostedt, Ch. A1 - Hoener, M. A1 - Moeller, T. T1 - Short-pulse laser induced melting and ablation studied with time-resolved coherent XUV scattering T2 - Laser Damage Symposium XLII: Annual Symposium on Optical Materials for High Power Lasers CY - Boulder, CO, USA DA - 2010-09-26 PY - 2010 AN - OPUS4-21686 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst A1 - Klingmüller, O. A1 - Schallert, M. A1 - Bobbe, A. T1 - Quality assurance of a secant pile wall using three different non-destructive test methods T2 - ISSMGE International Geotechnical Conference, Geotechnical Challenges in Megacities CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-21687 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reiners, Georg T1 - Stand der Normung in den Nanotechnologien T2 - Sitzung des FA Nanotechnik für die Medizintechnik CY - Düsseldorf, Germany DA - 2010-06-29 PY - 2010 AN - OPUS4-21656 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kromm, Arne A1 - Kannengießer, Thomas A1 - Gibmeier, J. A1 - Altenkirch, J. T1 - Residual Stresses in Multilayer Welds with Different Martensitic Transformation Temperatures Analyzed by High-Energy Synchrotron Diffraction T2 - 8th European Conference on Residual Stresses CY - Riva del Garda, Italy DA - 2010-06-26 PY - 2010 AN - OPUS4-21660 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Isecke, Bernd T1 - Modellierung von Bewehrungskorrosion - Korrosionsmechanismen T2 - 40. Aachener Baustofftag CY - Aachen, Germany DA - 2010-10-28 PY - 2010 AN - OPUS4-21661 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marchetti, Barbara A1 - von Chrzanowski, Lars A1 - Röseler, A. A1 - Schade, U. A1 - Beckmann, Jörg T1 - THz Spectroscopy to derive the optical Constants of Liquids T2 - 35th International Conference on Infrared, Millimeter and THz Waves (IRMMW-THz 2010) CY - Rome, Italy DA - 2010-09-05 PY - 2010 AN - OPUS4-21662 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bartusch, Jürgen A1 - Döring, Joachim A1 - Gaal, Mate A1 - Hillger, W. T1 - Untersuchungen zum Einsatz von PP-Schaumfoliensensoren für die berührungslose Ultraschallprüfung mit Ankopplung über Luft T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21637 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völz, Uwe A1 - Mrasek, Heinz T1 - Vergleich von Modellrechnung und Schallfeldmessung an Gruppenstrahlerprüfköpfen T2 - DGZfP-Jahrestagung CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21642 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Gaal, Mate A1 - Kreutzbruck, Marc T1 - Airborne Ultrasound Investigations of Cellulare Polypropylene Ferroelectret Film T2 - 10. European Federation for Non-Destructive Testing CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-21643 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc A1 - Boehm, Rainer A1 - Kitze, Jessica A1 - Eggers, H. A1 - Böwe, M. T1 - Using UT-SAFT for analysing of stress corrosion cracking T2 - 10th European Conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-21644 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schenk, Gottfried A1 - Ploigt, Roy A1 - Dohse, Elmar A1 - Deutsch, W. A. K. A1 - Bauer, L. T1 - COMPAS-XXL - A Novel Phased Array System with Extended Capabilities T2 - 10th European Conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-21646 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völz, Uwe A1 - Mrasek, Heinz A1 - Matthies, Klaus A1 - Kreutzbruck, Marc T1 - Visualization of Sound Propagation with Electrodynamic Probes T2 - 10th European Conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-21647 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kervalishvili, Guram N. A1 - Schlichting, Joachim A1 - Maierhofer, Christiane A1 - Kreutzbruck, Marc T1 - Heat Transfer Modeling of Local Thermal Excitation for Surface Crack Detection and Characterization T2 - 10th European Conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-21648 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Maierhofer, Christiane A1 - Mecke, R. A1 - Hofmann, Michael A1 - Schiller, M. A1 - Kalisch, U. A1 - Meinhardt-Degen, J. T1 - Quantification of damage processes at surfaces and interfaces of building structures using optical methods and active thermography T2 - 10th European Conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-21649 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Faber, M.H. A1 - Rücker, Werner T1 - Support Structure Reliability of Offshore Wind Turbines Utilizing an Adaptive Response Surface Method T2 - 29th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2010) CY - Shanghai, China DA - 2010-06-06 PY - 2010 AN - OPUS4-21650 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sarmiento Klapper, Helmuth A1 - Bäßler, Ralph A1 - Burkert, Andreas T1 - Recent progress in the qualification of mateirals used in geothermal energy conversion systems T2 - First International Conference on Materials for Energy CY - Karlsruhe, Germany DA - 2010-07-04 PY - 2010 AN - OPUS4-21651 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühn, Andreas A1 - Ostermann, Markus T1 - Kühn, A.; Höhse, M., Ostermann, M.; Neue Wege in der Analytik oberflächenmodifizierter Stähle; 2010, 21. - 23.02.2010, Attendorn T2 - Tag der Chemie CY - Berlin, Germany DA - 2010-06-16 PY - 2010 AN - OPUS4-21652 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Acikalin, Hatice Aydan T1 - Schutzkonzepte I - Grundlagen zur sicheren Durchführung chemischer Reaktionen T2 - DECHEMA-Weiterbildungskurs "Sicherheit chemischer Reaktionen" CY - Berlin, Germany DA - 2010-03-22 PY - 2010 AN - OPUS4-21653 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Acikalin, Hatice Aydan T1 - Schutzkonzepte II - Druckentlastung und Rückhaltung von gefährlichen Stoffen aus Druckentlastungseinrichtungen T2 - DECHEMA-Weiterbildungskurs "Sicherheit chemischer Reaktionen" CY - Berlin, Germany DA - 2010-03-22 PY - 2010 AN - OPUS4-21654 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Wolfgang T1 - Optimierung von Microarrays durch Anwendung physikalischer Methoden der chemischen Oberflächenanalytik T2 - 2. Berlin-Brandenburger Technologieforum "In-Vitro-Diagnostik und Bioanalytik" CY - Berlin, Germany DA - 2010-06-11 PY - 2010 AN - OPUS4-21655 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eichler, Thorsten A1 - Isecke, Bernd A1 - Wilsch, Gerd A1 - Faulhaber, Armin A1 - Weidauer, Kathleen T1 - The effect of chloride depletion on the corrosion state of steel in alkaline environment T2 - CONSEC 2010 CY - Mérida, Mexico DA - 2010-06-07 PY - 2010 AN - OPUS4-21612 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Redmer, Bernhard A1 - Malitte, Hans-Joachim A1 - Sölter, B. A1 - Reinhardt, E. A1 - Hacker, R. T1 - Technische und öffentliche Sicherheit von umschlossenen radioaktiven Quellen in der Werkstoffprüfung unter Beachtung nationaler und internationaler Anforderungen T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21613 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zimbal, Christine A1 - Nolde, Moana T1 - Determination of the Gurney energy of civil used explosives T2 - BAM-PTB Kolloquium CY - Berlin, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-21614 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zimbal, Christine A1 - Nolde, Moana T1 - Determination of the Gurney energy of civil used explosives T2 - ICT-Tagung CY - Karlsruhe, Germany DA - 2010-06-29 PY - 2010 AN - OPUS4-21615 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Merkel, Stefan A1 - Köppen, Robert A1 - Koch, Matthias A1 - Emmerling, Franziska A1 - Nehls, Irene T1 - Ergometrinine N2 - The absolute configuration of ergometrinine, C19H23N3O2 {systematic name: (6aR,9S)-N-[(S)-1-hydroxypropan-2-yl]-7-methyl-4,6,6a,7,8,9-hexahydroindolo[4,3-fg]quinoline-9-carboxamide}, was established based on epimerization reaction of ergometrine, which was followed by preparative HPLC. The non-aromatic ring (ring C of the ergoline skeleton) directly fused to the aromatic rings is nearly planar [maximum deviation = 0.271 (3) Å] and shows an envelope conformation, whereas ring D, involved in an intramolecular N-HN hydrogen bond, exibits a slightly distorted chair conformation. The structure displays undulating layers in the ac plane formed by O-H...O and N-H...O hydrogen bonds. KW - Ergometrinine KW - Ergometrine KW - Ergot alkaloids KW - Indole alkaloids KW - Crystal structure KW - Epimerization PY - 2010 DO - https://doi.org/10.1107/S1600536810030825 SN - 1600-5368 VL - 66 IS - 9 SP - o2275, sup-1 - sup-9 PB - Munksgaard CY - Copenhagen AN - OPUS4-21806 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lexow, Jürgen A1 - Krause, Ulrich ED - Jovanovic, A. ED - Renn, O. ED - Salvi, O. T1 - Liaisons to national and EU authorities and transfer of research results from the iNTeg-Risk project T2 - 2nd iNTeg-Risk conference: New technologies & emerging risks - Dealing with multiple and interconnected emerging risks CY - Stuttgart, Germany DA - 2010-06-14 KW - iNTeg-Risk projekt KW - Risiko KW - Informationsvermittlung KW - Behörde PY - 2010 SN - 978-3-938062-33-3 IS - II.3.25 SP - 345 EP - 351 CY - Stuttgart AN - OPUS4-21807 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Schmidtchen, Ulrich A1 - Holtappels, Kai T1 - Modeling the heat transfer in acetylene cylinders during and after the exposure to fire N2 - In this paper two different approaches for predicting the heating-up of an acetylene cylinder involved in a fire and the afterward cooling with water are presented. In the simulations polynomial functions were used to describe the temperature dependency of the thermal properties of the cylinder interior, which is a complex system composed by a solid porous material, a solvent (typically acetone) and acetylene dissolved in it. Model equations covered heat conduction in the cylinder interior and at its walls. In the first approach the cylinder surroundings were simulated as a further domain constituted by CO2, during the fire exposure, and for water, during the cooling. In this domain the coupled heat transfer (convection and conduction) and the momentum equation (Navier-Stokes) were solved. In the second approach no further domain was considered but boundary conditions were set directly on the cylinder walls. Results of the calculations performed with both approaches are presented. This work could prove helpful in predicting to which extent the interior of an acetylene cylinder exposed to fire reaches temperatures capable of initiating the decomposition of acetylene and to determine how long a water cooling should be applied, so that the system is brought again under non-critical conditions. KW - Safety KW - Acetylene KW - Heat transfer KW - Fire KW - Water cooling PY - 2010 DO - https://doi.org/10.1016/j.jlp.2010.06.012 SN - 0950-4230 SN - 1873-3352 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. VL - 23 SP - 654 EP - 661 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-21808 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Bovtun, Viktor Petrovic A1 - Bartusch, Jürgen A1 - Erhard, Anton A1 - Kreutzbruck, Marc A1 - Yakymenko, Y. T1 - Nonlinear electromechanical response of the ferroelectret ultrasonic transducers N2 - The ultrasonic transmission between two air-coupled polypropylene (PP) ferroelectret (FE) transducers in dependence on the amplitude of the high-voltage exciting pulse revealed a strongly nonlinear electromechanical response of the FE transmitter. This phenomenon is described by a linear increase of the inverse electromechanical transducer constant t33(1) of the PP FE film with an increase of the exciting electrical pulse amplitude. Enlargement of t33(1) by a factor of 4 was achieved by application of 3500 V exciting pulses. The electrostriction contribution to t33(1) can be attributed to the electrostatic force between electrodes and the Maxwell stress effect. The nonlinear electromechanical properties of the PP FE result in a strong increase of its air-coupled ultrasonic (ACUS) figure of merit (FOM) under the high-voltage excitation, which exceeds results of the PP FE technological optimization. The FOM increase can be related to the increase of PP FE coupling factor and/or to the decrease of its acoustic impedance. A significant enhancement of the ACUS system transmission (12 dB) and signal-to-noise ratio (32 dB) was demonstrated by the increase of excitation voltage up to 3500 V. The nonlinear electromechanical properties of the PP FEs seem to be very important for their future applications. KW - Airborne ultrasonics KW - Electret film KW - Transducer KW - Nonlinearity PY - 2010 DO - https://doi.org/10.1007/s00339-010-5752-7 SN - 0947-8396 VL - 100 IS - 2 SP - 479 EP - 485 PB - Springer CY - Berlin AN - OPUS4-21809 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Grünenwald, S. A1 - Seefeld, T. A1 - Vollertsen, F. A1 - Gook, Sergej A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Laserstrahl-MSG-Hybridschweißen dicker Bleche aus Rohrleitungsstahl mit Faserlasern hoher Leistung N2 - In diesem Beitrag werden die Ergebnisse aus einem gemeinschaftlich durchgeführten Forschungsprojekt zur Schweißeignung unlegierter Stähle mit Laserstrahl- und Lichtbogenschweißverfahren vorgestellt. Es wurden Schweißversuche in Ein- sowie Mehrlagentechnik mit Blechdicken von 16, 20 und 28 mm durchgeführt sowie die Prozessgrenzen für die Spaltüberbrückbarkeit, den Kantenversatz und das Schweißen in Zwangspositionen untersucht. Für die Schweißversuche kamen Faserlaser mit Leistungen von 8, 20 und 30 kW in Verbindung mit einem MAG-Schweißprozess als Laserstrahl-MSG-Hybridschweißen zum Einsatz. Mit dem 30-kW-Faserlaser war es möglich, 28 mm dicke Bleche einlagig zu schweißen, jedoch besteht weiterer Forschungsbedarf, um Aussagen über die erreichbare Qualität treffen zu können. Bei 20 kW Laserstrahlleistung wurde zum einlagigen Schweißen von Blechen mit einer Dicke von 20 mm eine entsprechende Nahtvorbereitung benötigt, 16 mm dicke Bleche konnten dagegen ohne Vorbereitung der Naht im Stumpfstoß geschweißt werden. In der Mehrlagentechnik wurden mit dem 8-kW-Faserlaser 16 mm dicke Bleche vorbereitet mit einer Y-Naht geschweißt. Hierbei wurde die Wurzellage hybrid geschweißt, die Füll- und Decklagen mit einem reinen MAG-Prozess. PY - 2010 SN - 0036-7184 VL - 62 IS - 6 SP - 338 EP - 347 PB - Verl. für Schweißen u. Verwandte Verfahren, DVS-Verl. CY - Düsseldorf AN - OPUS4-21810 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Konersmann, Rainer T1 - Die Schattenseiten des Zufalls N2 - Für Risikoanalysen werden Daten zur Konsequenzbeschreibung benötigt. Diese können oftmals nur mithilfe des Internets generiert werden. Bei diesen Recherchen werden manchmal auch Unfallberichte entdeckt, die derart kuriose Ereignisabläufe beschreiben, dass spontan der Eindruck entsteht, dass die Unfälle durch zufällige Verkettungen verursacht wurden. Aber was verbirgt sich hinter dem Begriff "Zufall"? Wir sprechen von Zufällen, wenn etwas geschieht, was nicht beabsichtigt war. In der Technik herrscht die Auffassung vor, dass es "den Zufall" eigentlich gar nicht geben kann, weil dieser bei näherem Hinsehen meist durch Unwissenheit, durch mangelnde Informationsbereitschaft, Leichtsinn und einem blinden Vertrauen auf die Routine heraufbeschworen wird. Aber ist dies wirklich immer so? KW - Zufallsereignisse KW - Restrisiko KW - Human factors PY - 2010 SN - 1434-9728 SN - 1436-4948 SN - 0372-2457 SN - 0376-1185 VL - 51 IS - 7/8 SP - 42 EP - 45 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-21811 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Liehr, Sascha A1 - Krebber, Katerina T1 - A novel quasi-distributed fibre optic displacement sensor for dynamic measurement N2 - We present a novel technique based on incoherent optical frequency domain reflectometry (OFDR) to measure length changes quasi-distributed between reflection points in optical fibres. The technique enables length changes to be measured with a resolution better than 1 µm and allows for static and dynamic measurement capabilities up to 2 kHz. We demonstrate that dynamic measurements of multiple fibre sections can be conducted independently from each other with high precision. Due to the precise and dynamic measurement capabilities, the proposed sensor system is expected to open new fields of application, especially in the structural-health-monitoring sector. Possible applications are discussed in the paper. KW - Strain sensor KW - Optical frequency domain reflectometry KW - OFDR KW - Optical fibre KW - Fibre sensors KW - Quasi-distributed sensors KW - Dynamic strain measurement PY - 2010 UR - http://iopscience.iop.org/0957-0233/21/7/075205/pdf/0957-0233_21_7_075205.pdf DO - https://doi.org/10.1088/0957-0233/21/7/075205 SN - 0957-0233 SN - 1361-6501 VL - 21 IS - 7 SP - 075205-1 - 075205-6 PB - IOP Publ. Ltd. CY - Bristol AN - OPUS4-21812 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schurig, Michael A1 - Häßlich, Mirko A1 - Klinger, Christian T1 - Der Temperaturgang von Beschleunigungssensoren und sein Einfluss auf die Messunsicherheit bei kombinierten Vibrations- und Klimaprüfungen N2 - Die Empfindlichkeit von Beschleunigungssensoren hängt von der Temperatur ab, bei der sie eingesetzt werden. Aus diesem Grund fordert der Entwurf der Neuausgabe von IEC 60068-2-53, dass Beschleunigungssensoren bei allen Prüftemperaturen kalibriert sein müssen. Darüber hinaus müssen die Grenzabweichungen der entsprechenden dynamischen Prüfverfahrensnormen eingehalten werden. Das Messunsicherheitsbudget für die Beschleunigungsmessung bei einer kombinierten Vibrations- und Klimaprüfung wird aufgestellt. Einflussgrößen sind die Kalibrierunsicherheit, der Frequenz- und Temperaturgang des Sensors, sowie die Messunsicherheit der elektrischen Messkette. Anhand typischer Prüfbedingungen werden Kriterien aufgestellt, wann der Temperaturgang für die Prüfung relevant wird. Eigene Untersuchungen und Hinweise aus der Literatur zeigen, dass dies eher selten der Fall ist. Gegebenenfalls muss auf geeignete Maßnahmen zur Verringerung der Messunsicherheit zurückgegriffen werden. Eine Kompensation des Temperaturganges ist möglich, aber derzeit noch aufwändig. KW - Beschleunigungssensor KW - Vibrationsprüfung KW - Klimaprüfung KW - Messunsicherheit PY - 2010 SN - 0341-230X SN - 1431-827X VL - 43 IS - 2 SP - 33 EP - 38 PB - Baltz CY - München AN - OPUS4-21813 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Rübner, Katrin A1 - Meng, Birgit A1 - Müller, Urs ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Investigating the original water content of concrete N2 - This chapter provides an overview of methods that are commonly used for the analysis of the original water content of fresh and hardened concrete. The methods consist of direct methods, which detect the water content or the water/cement ratio primarily, as well as indirect methods, which measure other material characteristics related to the water content. KW - Concrete analysis KW - Water content KW - Water/cement ratio KW - Pore structure analysis PY - 2010 SN - 978-1-84569-560-6 VL - 1 IS - Chapter 11 SP - 217 EP - 241 PB - Woodhead Publishing Ltd CY - Oxford AN - OPUS4-21814 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Boehm, Rainer A1 - Brackrock, Daniel A1 - Kitze, Jessica A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc ED - Thompson, D.O. ED - Chimenti, D.E. T1 - Advanced crack shape analysis using SAFT N2 - The spatial resolution in ultrasonic testing as a wave phenomenon in nature is limited to a certain fraction of the wavelength, usually defined to be close to the Rayleigh criterion. In case of complicated reflector surfaces – such as stress corrosion cracking - this limitation prevents an exact visualization of the defect shape. There exist a few approaches to improve the spatial resolution, whose reconstruction quality all in common also depend on the achieved signal-to-noise ratio of the raw data. In this work we present a specific SAFT analysis, in which a high number of different angles of incidence produce a sufficiently high number of different reflections at the crack edges resulting in an improved SNR. In doing so, we reconstruct a coherent crack structure. First investigations were made at artificially simulated crack configurations with different contours and curvatures in flat and cylindrical test blocks. The measurements results – visualized by representative scans – show details of crack design and crack orientation. We also will present a comparison of the SAFT analysis between modelling and phased array measurements. T2 - 36th Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Kingston, RI, USA DA - 2009-07-26 KW - Ultrasonic testing KW - SAFT KW - Phased array PY - 2010 SN - 978-0-7354-0748-0 SN - 0743-0760 SN - 0094-243X N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings SP - 1 EP - 8 CY - Melville, NY AN - OPUS4-21816 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schenk, Gottfried A1 - Brackrock, Daniel A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc A1 - Deutsch, W.A.K. A1 - Joswig, M. A1 - Maxam, K. A1 - Schuster, V. ED - Thompson, D.O. ED - Chimenti, D.E. T1 - Ultrasonic inspection system for automated round-bar-testing based on phased array technique N2 - Within a know-how transfer project funded by the government conventional ultrasonic technique was replaced by phased array technique for automated round-bar testing. Instead of applying a great number of conventional probes to achieve acceptable volume coverage we used curved linear arrays. The benefits of phased array technique such as programmable skew angles, beamforming and beam positions, led not only to a significant decrease in inspection time, but also the number of probes could be substantially reduced . Finally, the testing parameters for a large range of bar-diameters could be adapted by software control instead of time-consuming mechanical replacement. The probe-design was carried out by a proprietary modelling program. Both the theoretical calculations as well as the latter experimental verifications revealed significant advantages of curved arrays versus the planar types. A radial oriented probe offers perfect adaption to the cylindrical shape of the specimen allowing wide variations of the sound field. Thus beam direction, beam size and beam position could be optimized with respect to a minimum of inspection cycles, as inspections have to be executed in-line during the production. A number of laboratory tests were carried out on special test components. In order to achieve an optimal performance of the reference rod we implemented three different types of reference reflectors: (i) flat-bottom-holes with diameters of 0.8 mm and 1.2 mm, (ii) side-drilled-holes with a diameter of 0.7 mm for the detection of volumetric flaws, and (iii) notches with a depth of 0.2 mm and 0.5 mm for the detection of surfaceoriented defects. All laboratory tests were carried out with the COMPAS-XXL inspection system, a proprietary development of BAM. T2 - 36th Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Kingston, RI, USA DA - 2009-07-26 KW - Ultrasonic testing KW - Phased array KW - Round bar testing PY - 2010 SN - 978-0-7354-0748-0 SN - 0743-0760 SN - 0094-243X N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings VL - 29 SP - 1 EP - 7 CY - Melville, NY AN - OPUS4-21817 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Straub, Franka A1 - Wirth, Thomas A1 - Hertwig, Andreas A1 - Hodoroaba, Vasile-Dan A1 - Unger, Wolfgang A1 - Böllinghaus, Thomas T1 - Imaging the microstructure of duplex stainless steel samples with TOF-SIMS N2 - Time-of-flight secondary ion mass spectrometry (TOF-SIMS) mappings provide a visualization of the distribution of chemical elements and phases on polished duplex steel surfaces as element and fragment secondary ion signals. The advantage of TOF-SIMS, compared to optical microscopy, is its potential to analyze the chemical composition with a lateral resolution at a submicrometer scale. TOF-SIMS mappings allow distinguishing between ferritic and austenitic phases because of the phase selective detection method without any requirement of etching or other processing. KW - TOF-SIMS mappings KW - Duplex stainless steel KW - Surface analysis KW - Ferritic phase KW - Austenitic phase PY - 2010 UR - http://onlinelibrary.wiley.com/doi/10.1002/sia.3385/pdf DO - https://doi.org/10.1002/sia.3385 SN - 0142-2421 SN - 1096-9918 VL - 42 IS - 6-7 SP - 739 EP - 742 PB - Wiley CY - Chichester AN - OPUS4-21818 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Pretsch, Thorsten T1 - Hydrolytic aging of crystallizable shape memory poly(ester urethane): Effects on the thermo-mechanical properties and visco-elastic modeling N2 - The shape memory functionality of a segmented poly(ester urethane) and its hydrolytically aged specimens has been studied by cyclic thermo-mechanical measurements with an imposed strain of 100%. The shape memory effect was triggered by a melting transition in the soft segment phase. Aging was enforced by immersion in hot de-ionized water. In the course of the immersion the tensile properties (secant moduli, stress and strain at yield and break) were impaired by hydrolysis. Advanced specimen embrittlement finally led to rupture during the first thermo-mechanical cycle. This happened after 68 days of aging at 55 °C and correspondingly after 8 days at 80 °C. The residual strain after the first cycle, which was about 25%, increased significantly with aging time. Therefore, the total strain recoverability became ever smaller: aged specimens needed conditioning by at least two cycles for a full development of shape recoverability. Likewise the recovery force decreased continuously. Despite these degradation effects, it was observed that the shape fixity and the cycle-related shape recovery of appropriately conditioned specimens (number of cycles N > 2) remained on a constant high level (at round 100% and between 90% and 100%, respectively) throughout the whole aging period. These observations are discussed within the framework of a simplified model of the behavior of crystallizable shape memory polymers. The amorphous state of the polymer is described by the equation of the linear visco-elastic solid. As for the semi-crystalline state the material is assumed to react elastically with respect to deviations from the configuration, which was frozen up under constraint conditions. The curves of the dependence of the material behavior on aging time at 55 °C match perfectly those at 80 °C when the time axis is adjusted by a factor of 8.5, from which the apparent activation energy for hydrolytic aging in the amorphous state of 82 kJ mol-1 could be deduced. KW - Shape memory polymers KW - Hydrolytic degradation KW - Thermo-mechanical properties KW - Poly(ester urethane) KW - Active polymers PY - 2010 DO - https://doi.org/10.1016/j.eurpolymj.2010.05.004 SN - 0014-3057 SN - 1873-1945 VL - 46 IS - 8 SP - 1745 EP - 1758 PB - Elsevier CY - Oxford AN - OPUS4-21819 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kromm, Arne A1 - Kannengießer, Thomas T1 - In situ phase characterization of low transformation temperature (LTT) alloy by means of synchrotron diffraction N2 - Cold cracking resistance is a relevant evaluation criterion for welded joints and affected by residual stresses which result from the welding procedure. Compressive residual stresses can thereby have a positive influence on preventing cracking. A unique possibility of generating compressive residual stresses already during the welding procedure is offered by the socalled Low Transformation Temperature (LTT) filler wires. Compared to conventional wires, these materials show decreased phase transformation temperatures which can work against the cooling-specific contraction. In consequence, distinct compressive residual stresses can be observed within the weld and adjacent areas. The strength of these fillers makes them potentially applicable to high-strength steel welding. Investigations were carried out to determine the phase transformation behaviour of different LTT-filler materials. Transformation temperatures were identified using Single Sensor Differential Thermal Analysis (SS-DTA). Additionally Synchrotron radiation was used to measure the transformation kinetics of all involved crystalline phases during heating and cooling of a simulated weld thermal cycle. KW - In-situ phase analysis KW - Energy dispersive diffraction KW - Phase transformation PY - 2010 SN - 1684-579X VL - 5 IS - 158 SP - 17 EP - 23 PB - Izdat. Masinostroenie CY - Moskva, Russia AN - OPUS4-21829 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Droste, Bernhard A1 - Musolff, André A1 - Müller, Karsten A1 - Quercetti, Thomas T1 - Drop and fire testing of spent fuel and HLW transport casks at "BAM test site technical safety" - 10079 T2 - WM2010 - 36th Annual radioactive waste management symposium CY - Phoenix, Arizona, USA DA - 2010-03-07 KW - transport packages of radioactive materials KW - Safety KW - Mechanical tests KW - Thermal tests KW - Drop test facility KW - Fire test facilities KW - Numerical calculations PY - 2010 SN - 978-0-9828171-0-0 SP - 1 EP - 11 CY - Tempe, AZ, USA AN - OPUS4-21830 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz ED - Tizani, W. T1 - Vibration of buildings on pile groups due to railway traffic - finite-element boundary-element, approximating and prediction methods N2 - A finite-element boundary-element software for the dynamic interaction of flexible structures and the soil has been extended for pile foundation. The boundary element method for the soil uses the Green´s functions of the layered half-space which have been generalised for interior loads. Pile groups of 10 to 20 piles of different arrays are analysed and compared with single piles. Simplified models have been developed for a user-friendly, practice oriented prediction software for railway induced ground and building vibration. T2 - ICCCBE 2010 - International conference on computing in civil and buildung engineering CY - Nottingham, UK DA - 2010-06-30 KW - Boundary elements KW - Soil-structure interaction KW - Pile foundations KW - Prediction software PY - 2010 SN - 978-1-907284-60-1 IS - Paper 275 SP - 549 EP - 554 PB - Nottingham University Press AN - OPUS4-21832 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Auersch, Lutz T1 - Wave propagation in the elastic half-space due to an interior load and its application to ground vibration problems and buildings on pile foundations N2 - A method is presented which allows to calculate the wave-field in a homogeneous or layered soil in case of a dynamic interior load. The wave propagation along the surface, the distribution of the response over the depth, the horizontal propagation at different depths and the vertical downward propagation are shown and compared with the simpler surface solution of the half-space and the interior solution of the full-space. The complete wave-field (Green's function) is applied to the dynamic behaviour of piles and pile groups by use of a boundary element formulation. The stiffness, damping and – typically for piles – mass of different groups of piles are presented. Different group effects occur for lines, circles, grids, parallels and crosses of piles, which can be regarded as oscillations around average values. Moreover, the piles and pile groups behave almost like a damper for most of the frequencies. A building on a pile group that is excited by ground vibration due to surface or interior loads shows a reduction of the wave-field due to kinematic and inertial soil–building interaction effects. The results presented lead to simplified descriptions of the wave-field due to interior loads and of the soil–pile–building interaction which can be used for the prediction of technically induced vibration. KW - Wave propagation KW - Interior load KW - Dynamic pile and pile group stiffness KW - Kinematic and inertial soil-pile-building KW - Interaction PY - 2010 DO - https://doi.org/10.1016/j.soildyn.2010.04.003 SN - 0261-7277 SN - 0267-7261 VL - 30 IS - 10 SP - 925 EP - 936 PB - Elsevier Science CY - Amsterdam AN - OPUS4-21833 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dietrich, Paul A1 - Unger, Wolfgang T1 - Charakterisierung von Microarrays durch Anwendung physikalischer Methoden der chemischen Oberflächenanalytik KW - Oberflächenmodifizierungen KW - Self-assemblierende Monolagen KW - Thiole KW - Aminierte Oberflächen KW - Microarrays KW - XPS KW - ToF-SIMS PY - 2010 UR - http://www.analytik-news.de/Fachartikel/Volltext/BAM1.pdf SP - 1 EP - 11 PB - Dr. Beyer Internet-Beratung CY - Ober-Ramstadt AN - OPUS4-21834 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mix, Renate T1 - Aerosol-based DBD - a simple way to provide polymers with functional groups for adhesion promotion T2 - ACS 240th National Meeting, Symposium in Honor of Kash Mittal CY - Boston, MA, USA DA - 2010-08-22 PY - 2010 AN - OPUS4-21866 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sarmiento Klapper, Helmuth A1 - Bäßler, Ralph A1 - Burkert, Andreas A1 - Finke, M. T1 - Evaluación de la resistencia a la corrosión de materiales paa su uso en centrales geotérmicas T2 - VII Congreso Latinoamericano de Corrosión LATINCORR 2010, NACE International CY - Quito, Ecuador DA - 2010-08-31 PY - 2010 AN - OPUS4-21867 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Scholz, Christian A1 - Manier, Charles-Alix A1 - Woydt, Mathias ED - de Wilde, W.P. ED - Brebbia, C.A. ED - Mander, U. T1 - Slip-rolling resistance of high performance thin films and high toughness steel substrates under extreme conditions N2 - Nowadays, diamond-like carbon (DLC) coatings are mainly used in many low loaded applications such as in machine tools, computer devices and many more. Especially the automotive industry anticipates a benefit in applying such coatings in association with the lightweight construction of mechanical parts, for instance in gear components. The ulterior motive is a global performance increase regarding environmental impact and power efficiency. In recent years, the slip-rolling resistance of DLC, a-C and ta-C thin film coatings was improved considerably. In view of the mechanical application of thin film coatings, there is still room for improvements. It was experimentally shown, that a-C and ta-C coatings can be slip-rolling resistant at room temperature in unaddivated paraffin oil up to ten million cycles under Hertzian contact pressures up to P0max = 2.9 GPa. Typically, the prime coated steel substrates were made of the hardened and tempered steels 100Cr6H and Cronidur 30. The aim of the work this to overtake these results, i.e. at higher maximum Hertzian pressures up to P0max = 4.2 GPa. Under such extreme conditions, it is necessary to choose special steels to avoid the failure of the substrate and to permit a higher load carrying capacity of the coating-substrate-system. In consideration of the increased substrate properties, two high toughness spring steels and an ultra-high toughness aerospace steel were tested on a twin disc tribometer of the Amsler type as well as on an Optimol TwinDisc test rig under mixed/boundary conditions. Different factors such as residual stresses of the substrate, influences of the lubrication, and wear behaviour were investigated. The respective results are presented here. KW - Slip-rolling KW - High toughness steel KW - DLC KW - a-C KW - Thin film coating PY - 2010 SN - 978-1-84564-464-2 DO - https://doi.org/10.2495/HPSM100481 SN - 1746-4498 SN - 1743-3509 VL - 112 SP - 521 EP - 532 PB - WIT Press CY - Ashurst, Southampton, UK AN - OPUS4-21868 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlichting, Joachim A1 - Kervalishvili, Guram N. A1 - Maierhofer, Christiane A1 - Kreutzbruck, Marc T1 - Geometrische Charakterisierung von Fehlstellen mittels lokal angeregter aktiver Thermografie N2 - In diesem Beitrag wird eine Methode zur Charakterisierung von offenen Oberflächenrissen mittels aktiver Thermografie präsentiert. Hierzu wird die Probe ortsfest lokal mit einem Laser erwärmt und die resultierende Oberflächentemperatur mittels Infrarotkamera aufgenommen. Bei einer ungestörten Probe ergibt sich ein rotationssymmetrisches Temperaturprofil. Betrachtet man hingegen einen Bereich mit einem Oberflächenriss, so kommt es durch die Störung des lateralen Wärmetransports zu einer unsymmetrischen Temperaturverteilung. Durch die quantitative Analyse diese Unsymmetrie lassen sich Aussagen über geometrische Parameter des Risses treffen. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Mi.1.C.2) SP - 1 EP - 8 CY - Berlin AN - OPUS4-21869 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Mecke, R. A1 - Seidl, T. A1 - Schiller, M. A1 - Kalisch, U. A1 - Meinhardt, J. A1 - Hennen, C. T1 - Entwicklung und Kombination optischer und thermografischer zerstörungsfreier Messverfahren zur Bewertung von Bauteiloberflächen und -grenzflächen N2 - Die Kombination und direkte Datenfusion der Ergebnisse von 3DLaserscannern zur Erfassung der Geometrie und der aktiven Thermografie zur Ortung verdeckter Hohlstellen und anderer Inhomogenitäten liefert umfassende quantitative Informationen über die Zuordnung von Merkmalen und Veränderungen eines Bauteils. In diesem Beitrag werden die erforderlichen Verfahrensspezifikationen, das Prinzip der Datenüberlagerung und ausgewählte Fallstudien aus der Denkmalpflege vorgestellt. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Mi.1.C.1) SP - 1 EP - 9 CY - Berlin AN - OPUS4-21870 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feistkorn, Sascha A1 - Taffe, Alexander T1 - Die Anwendung der POD zum Nachweis der Güte zerstörungsfreier Prüfverfahren im Bauwesen N2 - Der Nachweis der Güte von zerstörungsfreien Prüfverfahren im Bauwesen (ZfPBau-Verfahren) ist neben der Kenntnis der Leistungsfähigkeit eine wichtige Grundlage für deren zunehmende Akzeptanz in der Baupraxis. Während die Ermittlung der Leistungsfähigkeit durch systematische Untersuchungen und Messunsicherheitsermittlung in der ZfP im Bauwesen zunehmend Verbreitung findet, ist der Einsatz der POD (Probability of Detection) im Bauwesen ganz im Gegensatz zur klassischen ZfP neu. In diesem Beitrag wird am Beispiel von Radarmessungen nachgewiesen, dass so genannte "a-versus-â-Beziehungen" auch in der ZfPBau aufgestellt werden können und diese zu sinnvollen POD-Kurven führen. Dadurch wird es künftig möglich sein, Geräte oder Auswertungsalgorithmen nach festgelegter Vorgehensweise zu testen und deren Güte durch Kennwerte der POD-Analyse objektiv und quantitativ zu vergleichen. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - POD KW - Probability of detection KW - ZfPBau KW - Radar KW - Zerstörungsfreie Prüfung KW - Gütenachweis KW - Zuvelässige Detektionstiefe PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (P4) SP - 1 EP - 9 CY - Berlin AN - OPUS4-21871 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider-Gloetzl, J. A1 - Gloetzl, R. A1 - Krebber, Katerina A1 - Liehr, Sascha A1 - Wendt, Mario A1 - Wosniok, Aleksander T1 - Geotechnical monitoring of construction activities by distributed fiber optic sensors embedded in geotextiles T2 - 5th European workshop on structural-health-monitoring 2010 CY - Sorrento, Italy DA - 2010-06-29 KW - Foundation engineering KW - Geotechnical monitoring KW - Smart textiles KW - Distributed fiber optic sensors KW - POF sensors KW - Brillouin sensors PY - 2010 IS - SS4-07 SP - 1 EP - 6 AN - OPUS4-21872 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - von Oertzen, Alexander T1 - EG-Baumusterprüfung von pyrotechnischen Gegenständen KW - Pyrotechnikrichtlinie 2007/23/EG PY - 2010 SN - 0941-4584 VL - 32 IS - 2 SP - 19 EP - 20 PB - Deutscher Sprengverband CY - Siegen AN - OPUS4-21874 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Senoner, Mathias A1 - Wirth, Thomas A1 - Unger, Wolfgang T1 - Imaging surface analysis: Lateral resolution and its relation to contrast and noise N2 - Lateral resolution, also called image resolution, is the most relevant quality parameter of maps and line scans. Therefore well defined procedures for the determination of lateral resolution are required. In the surface analysis community different definitions of lateral resolution are in use and there is no generally accepted method for the determination of lateral resolution which meets the demands of the state-of-the-art in surface analysis. We propose the determination of lateral resolution by imaging of well defined square-wave gratings with finely graded periods. This method enables the real time estimation of lateral resolution and the adjustment of instrument settings with respect to lateral resolution. The effect of noise and contrast on lateral resolution has been analysed by numerically simulated images of square-wave gratings. A new resolution criterion has been developed which is based on the dip-to-noise ratio and takes into account the sampling step width by introducing a "reduced noise". The contrast transfer function has been introduced and its relation to lateral resolution in the presence of noise was analysed. For that reason an "effective cut-off frequency" was defined which is the reciprocal of the lateral resolution. Normalized values of lateral resolution and their relation to signal-to-noise ratio and sampling step width were given for Gaussian and Lorentzian line spread functions. These values enable the calculation of experimental parameters which are necessary to get a required value of lateral resolution. Finally the successful application of the proposed approach to determine lateral resolution has been demonstrated by ToF-SIMS element mapping of the certified reference material BAM-L200. KW - Auflösungskriterium KW - BAM-L200 KW - Effektive cut-off Funktion KW - Laterale Auflösung KW - Kontrast KW - Kontrasttransferfunktion KW - Linienverwaschungsfunktion KW - Rauschen PY - 2010 DO - https://doi.org/10.1039/c004323k SN - 0267-9477 SN - 1364-5544 VL - 25 SP - 1440 EP - 1452 PB - Royal Society of Chemistry CY - London AN - OPUS4-21875 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Faber, M.H. A1 - Thöns, Sebastian A1 - Narasimhan, H. A1 - Schubert, M. T1 - Risikobasierter Ansatz zur Bewertung der Robustheit von Bauwerken N2 - Ziel des vorliegenden Beitrages ist es, einen Überblick über die aktuellen Entwicklungen im Bereich der Bewertung und der Quantifizierung der Robustheit von Bauwerken zu geben. In diesem Sinne ist eine Zusammenstellung von Ansätzen und Ergebnissen aktueller Veröffentlichungen enthalten. Ein umfassender entscheidungstheoretischer Ansatz für die Berechnung und das Management der Robustheit wird vorgestellt. Dieser beinhaltet die Definition der Robustheit als eine Qualität eines Systems, welches das Bauwerk beinhaltet, d. h. eine Qualität, die auf der Grundlage einer Risikoanalyse bewertet werden kann. Um eine umfassende Risikoanalyse zu ermöglichen, wird ein szenarienbasierter Modellansatz eingeführt, welcher zwei Arten von Konsequenzen im System unterscheidet: direkte Konsequenzen (in Verbindung mit Schäden einzelner Komponenten des Systems) und indirekte Konsequenzen (in Verbindung mit einem Versagen des Systems). Die Definition des Systems spielt deshalb für die Risikoanalyse eine wichtige Rolle, und es wird diskutiert, wie die Robustheit für verschiedene Definitionen zu unterschiedlichen Ergebnissen und Erkenntnissen im Sinne des Managements der Integrität des Bauwerks im gesamten Lebenszyklus unter Berücksichtigung seiner Funktionalität führt. Weiterhin werden wichtige Aspekte der Standardisierung der Robustheitsanalyse, wie auch Anforderungen an die Robustheit, diskutiert und Vorschläge zum Umgang mit diesen Aspekten unterbreitet. Auf der Grundlage der vorgestellten Ansätze zur Berechnung der Robustheit eines Bauwerks wird beschrieben, wie Entscheidungen in Bezug auf den Entwurf, die Zustandsbewertung, auf Inspektionen und Wartung sowie in Bezug auf die Überwachung von Bauwerken, in Hinblick auf das Management der Risiken in allen Phasen des Lebenszyklus, optimiert werden können. KW - Qualität KW - Risikoanalyse KW - Modellansatz KW - Konsequenz KW - Direkt KW - Indirekt KW - Versagen KW - Schaden KW - Lebenszyklus KW - Hängebrücke KW - Quality KW - Risk assessment KW - Model approach KW - Consequence KW - Direct KW - Indirect KW - Failure KW - Damage KW - Life-cycle KW - Suspension bridge KW - Entwurf und Konstruktion KW - Berechnungs- und Bemessungsverfahren KW - Bestandssicherung und Erhaltung PY - 2010 DO - https://doi.org/10.1002/stab.201001354 SN - 0038-9145 SN - 1437-1049 SN - 0932-6375 VL - 79 IS - 8 SP - 547 EP - 555 PB - Ernst CY - Berlin AN - OPUS4-21862 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. T1 - Modellrekonstruktionen unvollständiger computertomographischer Datensätze T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Computer-Tomographie KW - Rekonstruktionsalgorithmen KW - Limited view KW - Few angles KW - Region of interest PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Poster 17) SP - 1 EP - 7 CY - Berlin AN - OPUS4-21863 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Kupsch, Andreas A1 - Manke, I. A1 - Kardjilov, N. A1 - Arlt, Tobias A1 - Grothausmann, R. T1 - Rekonstruktion limitierter CT-Datensätze von Brennstoffzellen mit DIRECTT T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Computer-Tomographie KW - Rekonstruktionsalgorithmen KW - Neutronen-Tomographie KW - Elektronen-Tomographie PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Mi.1.B.3) SP - 1 EP - 11 CY - Berlin AN - OPUS4-21864 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - van de Kreeke, Johannes A1 - de la Calle, B. A1 - Held, A. A1 - Bercaru, O. A1 - Ricci, M. A1 - Shegunova, P. A1 - Taylor, P. T1 - IMEP-23: The eight EU-WFD priority PAHs in water in the presence of humic acid N2 - Recently, the International Measurement Evaluation Programme (IMEP) organized an interlaboratory comparison on total concentrations of eight polycyclic aromatic hydrocarbons (PAHs) in natural inland waters. It was carried out in support to the European Union Water Framework Directive (EU-WFD) that lists these eight as priority substances. As sample matrix, we used groundwater spiked with humic acid as a model for the colloidal substances that are present in natural inland waters. Humic substances can adsorb PAHs, but we found that some laboratories did not apply analytical procedures that sufficiently accounted for this. One of these laboratories was involved in establishing the reference values. We show how this impacted on the reliability of their measurements. Many participants accepted our invitation to report their measurement uncertainties. We assessed their results against our reference values and uncertainties, and provided z and zeta scores. Although the overall measurement capability appears satisfactory, there is room for improvement of analytical procedures as regards the use of measurement standards. KW - Dissolved organic matter (DOM) KW - Humic substance KW - Interlaboratory comparison (ILC) KW - Internal standard KW - International measurement evaluation programme (IMEP) KW - Polycyclic aromatic hydrocarbon (PAH) KW - Reference value KW - Uncertainty KW - Water KW - Water framework directive (WFD) PY - 2010 DO - https://doi.org/10.1016/j.trac.2010.04.009 SN - 0165-9936 SN - 0703-7147 VL - 29 IS - 8 SP - 928 EP - 937 PB - Elsevier CY - Amsterdam AN - OPUS4-21865 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Trela, Christiane A1 - Gil, Magdalena ED - Meßinger, J. T1 - Bodenuntersuchungen mit Georadar zum Auffinden von Grenzsteinen KW - Bodenuntersuchung KW - Georadar KW - Grenzsteine KW - Radar PY - 2010 SN - 0947-1944 VL - I SP - 7 EP - 14 PB - Dt. Geophysikalische Ges. CY - Potsdam AN - OPUS4-21836 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bornschein, F. A1 - Torge, Manfred A1 - Drewello, R. A1 - Bellendorf, P. A1 - Wetter, N. A1 - Sterzing, N. A1 - Hahn, O. T1 - Konservierung mittelalterlicher Glasmalerei im Kontext spezieller materieller und umweltbedingter Gegebenheiten KW - Glasmalerei KW - Restaurierung KW - Zaponlack PY - 2010 SN - 0933-4017 VL - 5 IS - Juli/August SP - 320 EP - 325 PB - Callwey CY - München AN - OPUS4-21837 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sokolowski-Tinten, K. A1 - Bonse, Jörn A1 - Barty, A. A1 - Boutet, S. A1 - Shymanovich, U. A1 - Bogan, M. A1 - Marchesini, S. A1 - Hau-Riege, S. A1 - Stojanovic, N. A1 - Rosandi, Y. A1 - Urbassek, H. M. A1 - Tobey, R. A1 - Ehrke, H. A1 - Cavalleri, A. A1 - Dsterer, S. A1 - Redlin, H. A1 - Frank, M. A1 - Bajt, S. A1 - Schulz, J. A1 - Seibert, M. A1 - Hajdu, J. A1 - Treusch, R. A1 - Chapman, H. N. T1 - Short-pulse laser induced transient structure formation and ablation studied with time-solved coherent XUV-scattering T2 - The Banff Meeting on Structural Dynamics - Ultrafast Dynamics with X-rays and Electrons CY - Banff, Canada DA - 2010-02-25 PY - 2010 AN - OPUS4-21838 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Michael T1 - On the creep rupture prediction of composite pressure vessels T2 - ASME 2010 Presssure Vessels & Piping Conference CY - Bellevue, WA, USA DA - 2010-07-18 PY - 2010 AN - OPUS4-21840 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Farahbakhsh, Mahin A1 - Eiben, Mario T1 - Sprachverwirrung bei Gefahrgütern N2 - In den Gefahrgutvorschriften gibt es keine klaren Regeln für die einheitliche Benennung von Gefahrgütern, die nicht direkt in der Gefahrgutliste genannt sind. Die Verwendung von unterschiedlichen Namen für ein und denselben Stoff erschwert den Informationsfluss. Hinzu kommt, dass viele chemische Benennungen Sonderzeichen (z. B. griechische Buchstaben, Umlaute, etc.) enthalten, die elektronisch oft nicht gut übertragbar sind. Dies kann zu einem erheblichen Fehlerpotenzial bei Gefahrgutunfällen führen. Abhilfe könnte eine Hilfsdatenbank mit einheitlichen und elektronisch gut übertragbaren Benennungen schaffen. ------------------- In the dangerous goods regulations there is no clear rule for the naming of dangerous goods which are not directly registered in the dangerous goods list. The use of different names for the same substances makes communication about these goods difficult. On the other hand, many chemical names include special characters (e.g. Greek letters, umlauts etc.) which are not easily transferable electronically. This results in a potential for substantial error in the case of an incident with dangerous goods. To solve this problem a database is recommended with uniform names which are easily transferable electronically. KW - Gefahrgut KW - Benennungen KW - GGluK KW - Sondervorschrift 274 PY - 2010 DO - https://doi.org/10.1002/ciuz.201000513 SN - 0009-2851 VL - 44 IS - 4 SP - 254 EP - 259 PB - Wiley-VCH CY - Weinheim AN - OPUS4-21843 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Ulrich A1 - Knaust, Christian A1 - Vela-Wallenschus, Iris A1 - Lerena, Pablo A1 - Auerkari, Pertti T1 - Approaches towards a generic methodology for storage of hazardous energy carriers and waste products T2 - Proceedings of 2nd International iNTegRisk conference CY - Stuttgart, Germany DA - 2010-06-15 PY - 2010 N1 - Geburtsname von Vela-Wallenschus, Iris: Vela, I. - Birth name of Vela-Wallenschus, Iris: Vela, I. AN - OPUS4-21845 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eiben, Mario A1 - Farahbakhsh, Mahin T1 - Datenbank GEFAHRGUT T2 - Lehrveranstaltung "Informationsquellen Naturwissenschaften", BAM CY - Berlin, Germany DA - 2010-07-08 PY - 2010 AN - OPUS4-21796 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bonse, Jörn A1 - Krüger, Jörg T1 - Pulse number dependence of laser-induced periodic surface structures for femtosecond laser irradiation of silicon N2 - The formation of nearly wavelength-sized laser-induced periodic surface structures (LIPSS) on single-crystalline silicon upon irradiation with single (N = 1) and multiple (N ≤ 1000) linearly polarized femtosecond (fs) laser pulses (pulse duration τ = 130 fs, central wavelength λ = 800 nm) in air is studied experimentally. Scanning electron microscopy (SEM) and optical microscopy are used for imaging of the ablated surface morphologies, both revealing LIPSS with periodicities close to the laser wavelength and an orientation always perpendicular to the polarization of the fs-laser beam. It is experimentally demonstrated that these LIPSS can be formed in silicon upon irradiation by single fs-laser pulses—a result that is additionally supported by a recent theoretical model. Two-dimensional Fourier transforms of the SEM images allow the detailed analysis of the distribution of the spatial frequencies of the LIPSS and indicate, at a fixed peak fluence, a monotonous decrease in their mean spatial period between ~770 nm (N = 1) and 560 nm (N = 1000). The characteristic decrease in the LIPSS period is caused by a feedback-mechanism acting upon excitation of surface plasmon polaritons at the rough silicon surface which is developing under the action of multiple pulses into a periodically corrugated surface. KW - Elemental semiconductors KW - Fourier transforms KW - Laser beam effects KW - Optical microscopy KW - Polarisation KW - Polaritons KW - Scanning electron microscopy KW - Silicon KW - Surface morphology KW - Surface plasmons PY - 2010 UR - http://jap.aip.org/resource/1/japiau/v108/i3/p034903_s1 DO - https://doi.org/10.1063/1.3456501 SN - 0021-8979 SN - 1089-7550 VL - 108 IS - 3 SP - 034903-1 - 034903-5 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-21804 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Taffe, Alexander A1 - Hillemeier, B. A1 - Walther, A. T1 - Condition Assessment of a 45-year old Prestressed Concrete Bridge using NDT and Verification of the Results T2 - NDE/NDT of Highways and Bridges: Structural Materials Technology (SMT) 2010 CY - New York City, NY, USA DA - 2010-08-16 PY - 2010 AN - OPUS4-21805 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pfister, Sabine A1 - Krause, Ulrich A1 - Knaust, Christian A1 - Vela-Wallenschus, Iris T1 - Untersuchung von Brandszenarien in Industrieanlagen mit numerischer Strömungssimulation T2 - 12. Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Germany DA - 2010-06-15 PY - 2010 N1 - Geburtsname von Vela-Wallenschus, Iris: Vela, I. - Birth name of Vela-Wallenschus, Iris: Vela, I. AN - OPUS4-21846 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mix, Renate A1 - Friedrich, Jörg F. A1 - Wettmarshausen, Sascha T1 - New concept for polymer metal interfaces T2 - MACRO 2010 Polymer Science in the Service of Society CY - Glasgow, Scotland DA - 2010-07-11 PY - 2010 AN - OPUS4-21847 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mohamed, A. F. A1 - Mix, Renate A1 - Schönhals, Andreas A1 - Friedrich, Jörg F. T1 - Physical and Chemical Properties of Plasma Polymerized Allyl Alcohol Thin Films T2 - Twelfth International Conference on Plasma Surface Engineering (PSE 2010) CY - Garmisch-Partenkirchen, Germany DA - 2010-09-13 PY - 2010 AN - OPUS4-21848 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rübner, Katrin A1 - Herbst, Tristan A1 - Jakubcová, Petra T1 - Sekundärrohstoffe zur Betonherstellung - Eigenschaften und Eignungsbewertung T2 - Fachtagung Recycling R'10 CY - Weimar, Germany DA - 2010-09-22 PY - 2010 AN - OPUS4-21849 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dorgerloh, Ute A1 - Hilbert, S. A1 - Nehls, Irene T1 - Externe Qualitätssicherung im Grundwassermonitoring in analytischen Laboratorien T2 - DECHEMA Jahrestagung CY - Frankfurt am Main, Germany DA - 2010-11-22 PY - 2010 AN - OPUS4-21850 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Schmidt, Sebastian A1 - Godejohann, M. A1 - Mügge, C. A1 - Nehls, Irene T1 - Hyphenated techniques for the analysis of linear alkylbenzenesulfonates in technical formulation T2 - ISC 2010 CY - Valencia, Spain DA - 2010-09-12 PY - 2010 AN - OPUS4-21851 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lischka, Susanne A1 - Nehls, Irene A1 - Piechotta, Christian T1 - Synthese und Reinheitsuntersuchungen 13C-markierter Standards für die Arsenspeziesanalytik mittels LC-ESI-MS T2 - 9. MS-Symposium CY - Berlin, Germany DA - 2010-09-06 PY - 2010 AN - OPUS4-21852 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlichting, Joachim A1 - Kervalishvili, Guram N. A1 - Maierhofer, Christiane A1 - Kreutzbruck, Marc T1 - Geometrische Charakterisierung von Fehlstellen mittels lokal angeregter aktiver Thermografie / Characterizing geometrical parameters of voids with locally excited active thermography T2 - Sensoren und Messsysteme 2010 - 15. ITG/GMA-Fachtagung CY - Nürnberg, Deutschland DA - 2010-05-18 PY - 2010 SN - 978-3-8007-3260-9 IS - Paper 120 SP - 682 EP - 687 PB - VDE Verlag GmbH CY - Berlin, Offenbach AN - OPUS4-21855 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heinrich, Hans-Joachim A1 - Kipphardt, Heinrich A1 - Jakubowski, Norbert T1 - Application of Methane as a Gaseous Modifier for the Determination of Silicon Using ET AAS T2 - European Symposium on Atomic Spectrometry ESAS 2010 CY - Wroclaw, Poland DA - 2010-09-05 PY - 2010 AN - OPUS4-21789 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Traub, Heike A1 - Kipphardt, Heinrich A1 - Jakubowski, Norbert T1 - Determination of trace elements in Nb2O5 powder using LA-ICP-MS T2 - 10th European Workshop on Laser Ablation CY - Kiel, Germany DA - 2010-06-29 PY - 2010 AN - OPUS4-21790 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Traub, Heike A1 - Kipphardt, Heinrich A1 - Jakubowski, Norbert T1 - LA-ICP-MS zur Bestimmung von Elementspuren in Niobpentoxid-Pulver T2 - 9. Symposium Massenspektrometrische Verfahren der Elementspurenanalyse, 22. ICP-MS Anwendertreffen CY - Berlin, Germany DA - 2010-09-06 PY - 2010 AN - OPUS4-21791 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bäßler, Ralph A1 - Sarmiento Klapper, Helmuth A1 - Burkert, Andreas T1 - Corrosion behavior of high-alloyed materials in an artificial geothermal fluid at service conditions T2 - EUROCORR 2010 CY - Moscow, Russia DA - 2010-09-13 PY - 2010 AN - OPUS4-21793 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Auersch, Lutz T1 - Technically induced surface wave fields, Part II: Measured and calculated admittance spectra N2 - Transfer admittance spectra of technically induced surface wave fields are analyzed in theory and experiments. Theoretical admittance spectra of layered soils are obtained by integration in wavenumber domain and compared with experimental admittances due to hammer or vibrator excitation. The admittance spectra are strongly influenced by the layering and damping of the soil. Deep stiff-soil layers yield a low-frequency cutoff, whereas a strong damping yields a high-frequency cutoff. A sharp cutoff in a narrow frequency band, which is measured at some sites, can be explained by a damping that increases with frequency, such as viscous material or scattering damping. PY - 2010 DO - https://doi.org/10.1785/0120090229 SN - 0037-1106 SN - 1943-3573 VL - 100 IS - 4 SP - 1540 EP - 1550 PB - Seismological Society of America CY - El Cerito, Calif. AN - OPUS4-22406 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Baer, Wolfram T1 - Kerbschlagbiegeversuch T2 - DVM-Fortbildungsseminar Mechanisch-technologische Prüfmethoden CY - Stuttgart, Germany DA - 2010-03-15 PY - 2010 AN - OPUS4-22407 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rücker, Werner A1 - Baeßler, Matthias A1 - Cuéllar, Pablo A1 - Georgi, Steven A1 - Savidis, S. A1 - Tasan, E. A1 - Richter, Thomas A1 - Kirsch, Fabian T1 - Offshoregründungen unter zyklischen Einwirkungen, Auswirkungen auf die Tragfähigkeit und Gebrauchstauglichkeit T2 - VDI Fachkonferenz Offshore Windenergieanlagen CY - Bremerhaven, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22408 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rücker, Werner A1 - Said, Samir A1 - Rohrmann, Rolf A1 - Thöns, Sebastian T1 - Offshore Anlagenmonitoring, Fernüberwachung, Zustandsanalyse und Schadensfrüherkennung T2 - VDI Fachkonferenz Offshore Windenergieanlagen CY - Bremerhaven, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22410 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Körner, Ursula A1 - Neitsch, Marcel A1 - Wytrykus, Nancy A1 - Kiau, Torsten A1 - Schuster, Raimund T1 - Das neue BAM-Schema KW - Gefahrgut KW - Verpackung KW - IBC KW - Zulassung KW - BAM-GGR 001 KW - Qualitätssicherungsprogramm KW - Wiederaufarbeitung PY - 2010 SN - 0944-6117 IS - 12 SP - 28 EP - 30 PB - Vogel CY - München AN - OPUS4-22411 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Richter, Thomas A1 - Kirsch, Fabian A1 - Rücker, Werner T1 - Pile foundations for offshore windturbine - Does cyclic soil behaviour matter? T2 - DEWEK 2010, 10th German Wind Energy Conference CY - Bremen, Germany DA - 2010-11-17 PY - 2010 AN - OPUS4-22414 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bartholmai, Matthias A1 - Neumann, Patrick P. T1 - Micro-Drone for Gas Measurement in Hazardous Scenarios via Remote Sensing T2 - The 6th International Conference on REMOTE SENSING (REMOTE '10) CY - Iwate, Japan DA - 2010-10-04 PY - 2010 AN - OPUS4-22415 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Pettelkau, Alexander A1 - Hohendorf, Stefan A1 - Damm, David A1 - Farahbakhsh, Mahin A1 - Bartholmai, Matthias T1 - Securing of Dangerous Goods Transports by RFID-Tags with Sensor-Functionality and integrated Database "GEFAHRGUT" Information (SIGRID) T2 - 17th IAPRI World Conference on Packaging CY - Tianjin, China DA - 2010-10-12 PY - 2010 AN - OPUS4-22326 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Brita A1 - Shabir Mahr, Muhammad A1 - Sabel, Martin A1 - Pfeifer, Dietmar A1 - Hübert, Thomas T1 - Imprägnierung von Holz mit SiO2- und/oder SiO2-Solen: Fixierung der anorganischen Komponente im Holz T2 - XXXI. Tagung des Arbeitskreises "Nichtkristalline und partiellkristalline Strukturen" der DGK CY - Wolfersdorf (Berga), Germany DA - 2010-10-11 PY - 2010 AN - OPUS4-22327 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schöne, Dieter A1 - Bork, Claus-Peter ED - Klingbeil, D. ED - Vormwald, M. ED - Eulitz, K.-G. T1 - Fatigue investigations of damaged railway rails of UIC 60 profile N2 - The development of procedures to calculate the service life of railway rails requires test results which describe the damage of rails thus affording their validation. Within the DEUFRAKO integrated project NOVUM, ten rail specimens were tested under constant and variable amplitude loads to investigate the propagation of lateral cracks and to ascertain the service life. The test conditions were based on real rail loading and were used in the 3-point-bending test frame under alternating stress. An eccentric notch was applied as pre-arranged damage in the 60 E1 (260) rail specimens. The notched rails showed a similar behaviour like rails with strong head checks damaged by rolling contact fatigue. T2 - 18th European conference on fracture (ECF 18) - Fracture of materials and structures from micro to macro scale CY - Dresden, Germany DA - 2010-08-30 KW - Railway rail KW - Notch KW - Service loading fatigue KW - Crack propagation KW - Bending KW - Damage PY - 2010 SN - 978-3-00-031802-3 IS - Paper 88 SP - 1 EP - 8 AN - OPUS4-22328 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Zerbst, Uwe A1 - Ainsworth, R. A. A1 - Madia, Mauro ED - Klingbeil, D. ED - Vormwald, M. ED - Eulitz, K.-G. T1 - Reference load versus limit load in engineering flaw assessment: A proposal for a hybrid analysis option N2 - The net section limit load FY is a key input parameter for the accuracy of any elastic-plastic flaw assessment procedure of the R6 type. Unfortunately available limit load solutions are of variable quality since they have been obtained over decades by different methods. As a consequence the results of the fracture analyses such as the critical load or crack size are limited in their accuracy and are often significantly conservative. A further problem is that common limit load solutions based on ligament yielding are inadequate in a number of cases even for through crack configurations and should be replaced by some kind of local yielding solutions. In the present paper a simple and straightforward reference load definition is proposed instead of the limit load which strictly corresponds to a ligament yielding parameter Lr = 1 in the R6 Routine and similar approaches such as SINTAP and FITNET. This can be determined by finite element simulation for any geometry. In addition to a previous study on thin wall notched plates the method is applied to plates containing shallow semi-elliptical surface cracks. The results demonstrate that the approach provides a suitable extension and improvement of the existing methods. T2 - 18th European conference on fracture (ECF 18) - Fracture of materials and structures from micro to macro scale CY - Dresden, Germany DA - 2010-08-30 KW - Flaw assessment KW - Reference stress method KW - R6 procedure KW - EPRI method KW - SINTAP KW - FITNET KW - Limit load KW - Reference load PY - 2010 SN - 978-3-00-031802-3 IS - Paper 81 SP - 1 EP - 11 AN - OPUS4-22329 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jaunich, Matthias A1 - Stark, Wolfgang A1 - Wolff, Dietmar T1 - Low temperature properties of rubber seals T2 - 9th Fall rubber colloquium CY - Hannover, Germany DA - 2010-11-03 KW - Dichtungen KW - Elastomere KW - Tieftemperaturverhalten PY - 2010 SN - 978-3-9814076-0-0 SP - 175 EP - 178 AN - OPUS4-22331 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidtchen, Ulrich ED - Luschtinetz, T. ED - Lehmann, J. T1 - Ist Wasserstoff gefährlich? T2 - Klimaschutzkongress m-v / 17. Energie-Symposium "Nutzung regenerativer Energiequellen und Wasserstofftechnik" CY - Stralsund, Deutschland DA - 2010-11-04 KW - Wasserstoff PY - 2010 SN - 978-3-9813334-1-1 SP - 137 EP - 141 AN - OPUS4-22332 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfennig, Anja A1 - Linke, Barbara A1 - Kranzmann, Axel T1 - Carbon capture and storage technique (CCS): Reliability of pipe steels used in Ketzin, Germany verified in laboratory saline aquifer corrosion experiments N2 - During the compression emission gasses in deep geological layers (Carbon Capture and Storage, CCS) CO2-corrosion will become a relevant safety issue. The reliability of the steels used at the geological onshore CCS-site at Ketzin, Germany, (heat treated steel 42CrMo4 (1.7225, AISI 4140) used for casing, and the martensitic stainless injection pipe steels X46Cr13 (1.4034, AISI 420 C), X20Cr13 (1.4021, AISI 420 J), X35CrMo17 (1.4122)) is demonstrated in 1 and 2 years laboratory experiments. Samples were kept in a synthetic aquifer environment similar to the geological CCS-site at Ketzin, Germany at T=60 °C. This corrosive environment is then saturated with technical CO2 at a flow rate of 3 l/h. Microstructures were characterized by X-ray diffraction, light microscopy, scanning electron microscopy, and energy dispersive X-ray, after a series of heat treatments (700 h to 2 years). Due to very slow mass loss at extended exposure times to CCS-environment one year is sufficient to predict stable surface corrosion rates from laboratory experiments. The non-linear isothermal surface corrosion behaviour of the steels reveals surface corrosion rates around 0.1 to 0.8 mm/year, when obtained by mass gain. The loss of the base material is higher when calculated from the corrosion layer magnitude due to the unpredictable local corrosion attacks. Severe pit corrosion (pit heights ca. 4.5 mm) are only located on the high chromium steels. Main phases of the continuous scales are siderite FeCO3 and goethite α-FeOOH. The formation of the non-protective layer is likely to form via a transient Fe(OH)2-phase. T2 - MWWD & IEMES 2010 - 6th International conference on marine waste water discharges and coastal environment CY - Langkawi, Malaysia DA - 2010-10-25 KW - Saline aquiver KW - Environmental issues KW - CCS KW - CO2-injection KW - CO2-storage KW - Corrosion KW - Phase formation PY - 2010 SN - 978-9944-5566-4-4 IS - Paper 047_P SP - 1 EP - 17 AN - OPUS4-22333 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hao, N. A1 - Böhning, Martin A1 - Schönhals, Andreas T1 - CO2 gas transport properties of nanocomposites based on polyhedral oligomeric phenethyl-silsesquioxanes and poly(bisphenol A carbonate) N2 - Polymer-based nanocomposites were prepared by solution blending of polyhedral oligomeric silsesquioxane with phenethyl substituents (PhenethylPOSS) into poly(bisphenol A carbonate) (PBAC). First investigations focused on structure, morphology and dynamics, addressed mainly by dielectric relaxation spectroscopy are substantially extended in this study by the investigation of the CO2 gas transport behavior of these materials, i.e., permeation experiments using the time-lag technique as well as gravimetric gas sorption measurements. The nanocomposite materials were prepared with nanofiller contents ranging from 0 to about 40 wt % by solution blending and films of about 50-100 µm thickness were cast from this solution and used for the investigation of gas transport properties after drying and annealing. From the time-lag measurements the permeability and an effective diffusion coefficient for CO2 is obtained in dependence of POSS concentration and temperature. As main results, both, the permeability and the diffusivity, increase whereas the solubility decreases with increasing POSS concentration. These findings are discussed in the framework of a microphase separated morphology of the nanocomposite systems for POSS concentrations greater than a value cPOSScrit of ca. 7 wt % consisting of a polycarbonate-rich matrix and POSS-rich domains which are surrounded by an interfacial layer. The experimental solubility data suggest that the POSS-rich domains are more or less impermeable for CO2. On the basis of this assumption a quantitative model is provided to correct the solubility data for the phase separated morphology. Moreover the importance of the interfacial layer between the POSS particles or its domains for the properties of nanocomposites especially for the gas transport behavior is addressed by analyzing the sorption isotherms. Also, for the first time results from gas transport measurements and dielectric spectroscopy were quantitatively related to each other by taking the activation energies of CO2 diffusion and of the dielectric β-relaxation into consideration. The obtained clear correlation indicates that the CO2 gas transport is due to localized molecular fluctuations. As a further result, the diffusion coefficient obtained from time-lag and gas sorption measurements is in good agreement with respect to both their absolute values and in their concentration dependence. PY - 2010 DO - https://doi.org/10.1021/ma101463m SN - 0024-9297 SN - 1520-5835 VL - 43 IS - 22 SP - 9417 EP - 9425 PB - American Chemical Society CY - Washington, DC AN - OPUS4-22378 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Liehr, Sascha A1 - Wendt, Mario A1 - Krebber, Katerina T1 - Distributed strain measurement in perfluorinated polymer optical fibres using optical frequency domain reflectometry N2 - We present the latest advances in distributed strain measurement in perfluorinated polymer optical fibres (POFs) using backscatter techniques. Compared to previously introduced poly(methyl methacrylate) POFs, the measurement length can be extended to more than 500 m at improved spatial resolution of a few centimetres. It is shown that strain in a perfluorinated POF can be measured up to 100%. In parallel to these investigations, the incoherent optical frequency domain reflectometry (OFDR) technique is introduced to detect strained fibre sections and to measure distributed length change along the fibre with sub-millimetre resolution by applying a cross-correlation algorithm to the backscatter signal. The overall superior performance of the OFDR technique compared to the optical time domain reflectometry in terms of accuracy, dynamic range, spatial resolution and measurement speed is presented. The proposed sensor system is a promising technique for use in structural health monitoring applications where the precise detection of high strain is required. KW - Distributed strain sensor KW - Optical fibre sensor KW - Polymer optical fibre KW - POF sensor KW - Structural health monitoring KW - OTDR KW - OFDR PY - 2010 DO - https://doi.org/10.1088/0957-0233/21/9/094023 SN - 0957-0233 SN - 1361-6501 VL - 21 IS - 9 SP - 094023-1 - 094023-6 PB - IOP Publ. Ltd. CY - Bristol AN - OPUS4-22379 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Krebber, Katerina ED - Santos, J.L. ED - Culshaw, B. ED - López-Higuera, J.M. ED - MacPherson, W.N. T1 - A novel fiber optic technique for quasi-distributed and dynamic measurement of length change and refractive index N2 - We present a novel technique for dynamic and simultaneous measurement of displacement and refractive indices at multiple reflection points in optical fibers. This quasi-distributed sensor is based on the incoherent optical frequency domain reflectometry (I-OFDR) technique and allows for m-resolution length change measurement and precise refractive index measurement. We show that the dynamic measurement ability and the simple sensor design allows for new applications in the field of structural health monitoring and chemical process control. T2 - 4th European workshop on optical fibre sensors CY - Porto, Portugal DA - 2010-09-08 KW - Quasi-distributed sensor KW - Strain sensor KW - Length change measurement KW - Optical fiber sensor KW - Refractive index sensor KW - Structural health monitoring KW - OFDR PY - 2010 SN - 978-0-8194-8083-5 DO - https://doi.org/10.1117/12.866325 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 7653 SP - 76532V-1 - 76532V-4 PB - SPIE, the International Society for Optical Engineering CY - Bellingham, Wash. AN - OPUS4-22380 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - de Oliveira, Rui A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - Michaud, V. T1 - Advanced composite materials with embedded POF sensors for structural health monitoring N2 - A long period grating (LPG) mechanically imprinted in a microstructured polymer optical fibre (mPOF) is embedded in a carbon fibre reinforced polymer (CFRP) unidirectional laminate. Processing steps were established in order to ensure that mPOF does not suffer significant degradation. The strain and temperature responses of the embedded mPOF-LPG were then investigated. T2 - POF 2010 - 19th International conference on plastic optical fibers CY - Yokohama, Japan DA - 2010-10-19 PY - 2010 IS - P-25 SP - 1 EP - 4 AN - OPUS4-22381 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Krebber, Katerina T1 - Quasi-distributed and dynamic length change measurement in polymer optical fibers N2 - We present a novel technique based on the incoherent optical frequency domain reflectometry (l-OFDR) technique for dynamic (2 kHz) and quasi-distributed length change measurement in polymer optical fibers (POF). The extreme strain sensing capabilities (> 125 %) and cyclic load behaviour of perfluorinated POF are investigated using this technique. T2 - POF 2010 - 19th International conference on plastic optical fibers CY - Yokohama, Japan DA - 2010-10-19 PY - 2010 IS - Sensors-2 SP - 1 EP - 4 AN - OPUS4-22382 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Wendt, Mario A1 - Krebber, Katerina T1 - Distributed strain and length change measurement in POF using optical frequency domain reflectometry N2 - We show that the incoherent optical frequency domain (l-OFDR) technique provides superior performance compared to standard OTDR techniques in terms of spatial resolution and measurement time. The distributed strain measurement capabilities of perfluorinated POF up 100 % strain are shown and distributed length change measurement using correlation techniques and OFDR are presented. T2 - POF 2010 - 19th International conference on plastic optical fibers CY - Yokohama, Japan DA - 2010-10-19 PY - 2010 IS - Sensors-2 SP - 1 EP - 4 AN - OPUS4-22383 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Manier, Charles-Alix A1 - Ziegele, H. A1 - Barriga, J. A1 - Goikoetxea, J. A1 - Woydt, Mathias T1 - Zirconium-based coatings in highly stressed rolling contacts as alternative solution to DLC and ta-C coatings N2 - The slip-rolling resistance of DLC, a-C and ta-C thin film coatings was improved considerably in the last years, but there is still room for improvements in relation to (a) the temperature stability and (b) initial surface roughness after deposition. This paper presents a novel coating-substrate system in comparison to recently developed DLC coatings in a bench-mark test procedure exerting slip-rolling conditions in the presence of liquid lubricants. One of the Zr-based thin film coatings can withstand at least 1 million cycles under initial Hertzian contact pressures of up to P0max = 3500 MPa and oil temperatures of at least 120 °C associated with low coefficients of friction under mixed/boundary conditions or ten million of cycles under P0max = 2940 MPa. In comparison, some of the newly developed DLC coatings are slip-rolling resistant for at least up to 10 million cycles at RT (some of them also at 120 °C oil temperature) under Hertzian contact pressures of Pmax = 2600/2940 MPa. In general, Zr-based thin film coatings do not require special formulated oil formulations and Zr(C,N) bear on a straight coating architecture suited for mass production with nanosized layers. KW - Slip-rolling resistance KW - Zirconium KW - Zr(C,N) KW - DLC KW - Nanostructured coating KW - Multilayer PY - 2010 DO - https://doi.org/10.1016/j.wear.2010.08.004 SN - 0043-1648 VL - 269 IS - 11-12 SP - 770 EP - 781 PB - Elsevier CY - Amsterdam AN - OPUS4-22347 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Poli, Marco A1 - Grätz, Rainer A1 - Schröder, Volkmar T1 - Turbulente Explosionsdruckentlastung - Quo vadis? N2 - Zur Bemessung von Druckentlastungseinrichtungen bei Gasexplosionen in Umschließungen existieren derzeitig nur wenige wissenschaftlich fundierte Auslegungskriterien, die die konstruktiven Randbedingungen oder Prozessbedingungen der explosionsgefährdeten Anlagenteile ausreichend berücksichtigen. Aus diesem Grund werden in der Praxis häufig stark konservative Annahmen getroffen, die zu erheblichen Überdimensionierungen der Druckentlastungseinrichtungen führen können. Aus sicherheitstechnischer Perspektive können gerade diese vermeintlichen Sicherheitsmargen zu einer erheblichen Beschleunigung des transienten Druckverlaufs und damit eher zu einer Unterdimensionierung führen oder sogar den Übergang von Deflagrationen zu Detonationen (DDT) begünstigen [1-3]. Um die Gefahren bzw. die Einflussfaktoren dieser kritischen Zustände beurteilen zu können, soll im Rahmen eines Forschungsprojektes das Explosionsverhalten in Anwesenheit Turbulenz bildender Einbauten oder bei nicht atmosphärischen Bedingungen – speziell bei erhöhten Anfangsdrücken - systematisch untersucht werden. T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Explosionsdruckentlastung KW - Turbulente Verbrennung KW - Konstruktiver Explosionsschutz PY - 2010 SN - 978-3-89746-119-2 IS - Paper C-04 SP - 1 EP - 11 CY - Frankfurt/M. AN - OPUS4-22348 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habib, Abdel Karim A1 - Schalau, Bernd T1 - Erforderliche Komplexität bei der Modellierung einer Lachenverdunstung im Rahmen von Störfallauswirkungsbetrachtungen T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Verdunstung KW - Empirische Modelle KW - Experimentelle Daten KW - Anlagensicherheit KW - Umweltschutz KW - Sicherheitstechnik KW - Explosionsschutz PY - 2010 SN - 978-3-89746-119-2 IS - M-01 / Paper 8338 SP - 1 EP - 21 CY - Frankfurt/M. AN - OPUS4-22349 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rauchegger, Christian A1 - Schmidt, Dirk A1 - Lohse, Volkmar A1 - Negendank, Detlef A1 - Thévenin, D. T1 - Experimentelle Untersuchungen zur Schwergasausbreitung T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Schwergas KW - Sensortechnik KW - Experimentelle Daten PY - 2010 SN - 978-3-89746-119-2 IS - Paper M-02 SP - 1 EP - 10 CY - Frankfurt/M. AN - OPUS4-22350 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Hensel, Christina A1 - Kreißig, Michael A1 - Schmidtchen, Ulrich A1 - Holtappels, Kai T1 - Unterfeuerung von Acetylendruckgasbehältern T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Sicherheit KW - Acetylen KW - Feuer KW - Wasserkühlung KW - Wärmeübertragung PY - 2010 SN - 978-3-89746-119-2 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. IS - Paper N-02 SP - 1 EP - 20 CY - Frankfurt/M. AN - OPUS4-22351 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Köpp, Christian A1 - Drdácký, M. A1 - Hennen, C. A1 - Lanza, L. A1 - Golez, M. A1 - Kolymbas, D. A1 - Herle, I. A1 - Virsta, A. A1 - Binda, L. ED - Mufti, A. ED - Banthia, N. T1 - Protection of cultural heritage against flood (CHEF) - A European research project T2 - CSHM-3 - Conservation of heritage structures: using FRM and SHM CY - Ottawa, Canada DA - 2010-08-11 KW - Cultural heritage KW - Flood KW - Preventive measures KW - Humidity measurements KW - Knowledge transfer KW - Case study PY - 2010 SN - 978-0-88865-883-8 SP - 361 EP - 370 CY - Vancouver, Canada AN - OPUS4-22352 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gorbushina, Anna T1 - Mikrobiologische Perspektiven der Materialkunde T2 - Kolloquium der AG Photobiophysik am Institut für Physik an der Humboldt-Universität zu Berlin CY - Berlin, Germany DA - 2010-11-08 PY - 2010 AN - OPUS4-22353 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Válek, J. A1 - Kruschwitz, Sabine A1 - Wöstmann, Jens A1 - Kind, Thomas A1 - Valach, J. A1 - Köpp, Christian A1 - Lesák, J. T1 - Nondestructive investigation of wet building material: multimethodical approach N2 - Building stones are porous media and they can deteriorate through moisture ingress and secondary damage such as crystallization of soluble salts. Not only is this due to the increasing number of flood events in the past years but also structural damages of houses from activity such as leakage or rising moisture (groundwater) are the main causes. The potential benefit of several nondestructive testing methods to assess water damage in building stone has been studied in a field-scale experiment. Three testing walls made of fired clay brick, sandstone, and spongilite were flooded and their drying behavior monitored using infrared thermography, complex resistivity, ground penetrating radar, and ultrasonics. The results were compared to the average moisture content determined by gravimetric weighing of the specimens. Qualitatively, the results of the different nondestructive testing methods matched well. But in terms of quantitative data, some scatter was observed and the results should be viewed with care. Collecting time-consuming calibration data would help to overcome this problem, but especially when dealing with historic building structures, this is not always possible in practice. KW - Diagnostics KW - Moisture KW - Masonry KW - Nondestructive tests KW - Electrical PY - 2010 DO - https://doi.org/10.1061/(ASCE)CF.1943-5509.0000056 SN - 0887-3828 VL - 24 IS - 5 SP - 462 EP - 472 PB - Soc. CY - Reston, Va. AN - OPUS4-22355 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Taffe, Alexander T1 - Zerstörungsfreie Prüfung im Bauwesen - Weiterführende Prüfungen am Bauwerk T2 - Informationstag "Moderne Bauwerksprüfung - Technische und rechtliche Aspekte" an der Bundesanstalt für Straßenwesen (BASt) CY - Bergisch Gladbach, Germany DA - 2010-11-10 PY - 2010 AN - OPUS4-22336 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Taffe, Alexander A1 - Kind, Thomas A1 - Stoppel, Markus A1 - Kurz, J. T1 - Zuverlässige Bewehrungsortung: Vom klassischen Handgerät zum automatisierten Bauwerksscanner T2 - 8. Symposium Kathodischer Korrosionsschutz von Stahlbetonbauwerken an der Technischen Akademie Esslingen CY - Esslingen am Neckar, Germany DA - 2010-11-18 PY - 2010 AN - OPUS4-22337 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Taffe, Alexander T1 - Zerstörungsfreie Prüfung im Bauwesen - Grundlagen und Anwendungen T2 - "Sachkundiger Planer" - Zerstörungsfreie Prüfung in der Betoninstandsetzung, Fortbildungsveranstaltung des Bau-Überwachungsvereins (BÜV) in Kooperation mit der BAM CY - Berlin, Germany DA - 2010-11-12 PY - 2010 AN - OPUS4-22339 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Taffe, Alexander T1 - Moderne ZfP im Bauwesen anhand von Praxisbeispielen T2 - "Sachkundiger Planer" - Zerstörungsfreie Prüfung in der Betoninstandsetzung, Fortbildungsveranstaltung des Bau-Überwachungsvereins (BÜV) in Kooperation mit der BAM CY - Berlin, Germany DA - 2010-11-12 PY - 2010 AN - OPUS4-22340 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lohse, Volkmar A1 - Negendank, Detlef T1 - Betreiben von Gaswarnanlagen - Merkblätter T 021 und T 023 der BG RCI (BG-Chemie) sowie TRBS 1201 Teil 3 T2 - Vortrag und Seminar der Firma MSA CY - Berlin, Germany DA - 2010-11-10 PY - 2010 AN - OPUS4-22341 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Österle, Werner A1 - Prietzel, Claudia A1 - Kloß, Heinz A1 - Dmitriev, Andrey T1 - On the role of copper in brake friction materials N2 - Copper is a major ingredient in friction materials used for automotive braking. The purpose of this study was to find out how copper contributes to good brake performance properties in addition to providing good thermal conductivity. Microstructural investigations of copper chips at the surfaces of brake pads revealed a zone of severe plastic deformation which provides high hardness, but there is also evidence of recrystallized copper nano-particles which are incorporated into friction layers as soft ingredient once detached from the pad surface. Thus copper seems to play a dual role, firstly as reinforcing element of the brake pad providing primary contact sites, and secondly as solid lubricant by contributing to the formation of a layer of granular material providing velocity accommodation between the rotating disc and fixed pad. Confirmation for this hypothesis was obtained by modelling contact sites on the nanometre scale with the method of movable cellular automata. Results show both, the similarity of steel fibres and copper macro-particles in respect to providing primary contact sites, as well as similar sliding behaviours of friction layers containing either copper or graphite as soft inclusions. Furthermore, it is shown that not only material properties, but also the concentration of solid lubricant particles in the friction layers, determine conditions for friction force stabilization and smooth sliding behaviour. KW - Friction material KW - Friction layer KW - Copper macro-particle KW - Copper nano-particle PY - 2010 DO - https://doi.org/10.1016/j.triboint.2010.08.005 SN - 0301-679X VL - 43 IS - 12 SP - 2317 EP - 2326 PB - Butterworth-Heinemann CY - Oxford AN - OPUS4-22342 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Österle, Werner A1 - Prietzel, Claudia A1 - Dmitriev, Andrey T1 - Investigation of surface film nanostructure and assessment of its impact on friction force stabilization during automotive braking N2 - The unique nanostructure formed during severe as well as moderate braking on the surface of brake discs was investigated by conventional and analytical Transmission Electron Microscopy. In both cases nanocrystalline magnetite mixed with carbon nanoinclusions and minor amounts of other pad constituents were identified. On the basis of these observations the friction performance of a single micro-contact was simulated with the method of Movable Cellular Automata. Inspite of a simplified nanostructure which was examined in two dimensions only, the calculated mean coefficient of friction fitted well to the value usually demanded for automotive braking. Furthermore, the model predicts that oxide films without soft nanoinclusions are not capable of providing smooth velocity accommodation at the pad–disc interface and thus lead to unstable friction behaviour. KW - Friction KW - Third body film KW - Nanostructure KW - MCA-model KW - EFTEM PY - 2010 SN - 1862-5282 VL - 101 IS - 5 SP - 669 EP - 675 PB - Carl Hanser CY - München AN - OPUS4-22343 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Roden, E. A1 - Kappler, A. A1 - Bauer, I. A1 - Jiang, J. A1 - Paul, Andrea A1 - Stoesser, R. A1 - Konishi, H. A1 - Xu, H. T1 - Extracellular electron transfer through microbial reduction of solid-phase humic substances KW - Natural organic-matter KW - Electron-acceptors KW - Reducing bacteria KW - Ferric iron KW - Reduction KW - Acid KW - Groundwater KW - Release KW - Kinetics KW - PH PY - 2010 DO - https://doi.org/10.1038/NGEO870 SN - 1752-0894 SN - 1752-0908 VL - 3 SP - 417 EP - 421 PB - Nature Publishing Group CY - London AN - OPUS4-22345 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Hasenstab, A. A1 - Arndt, Ralf ED - Michaelsen, H. T1 - Mit Radar und Wärme - Zerstörungsfreie Untersuchung am Spindlerboden im Ovalen Kabinett KW - Parkett KW - Neues Palais KW - Radar KW - Aktive Thermografie PY - 2010 SN - 978-3-86568-462-2 SP - 245 EP - 250 PB - Michael Imhof AN - OPUS4-22356 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jann, Oliver A1 - Horn, Wolfgang A1 - Brödner, Doris A1 - Kalus, Sabine A1 - Juritsch, Elevtheria T1 - Emissionen flüchtiger organischer Verbindungen aus Bauprodukten T2 - VDI Wissensforum "Schadstoffe in Gebäuden - Gesunde Innenraumluft - Stoffe, Beurteilung, Sanierung" CY - Köln, Deutschland DA - 2010-11-09 KW - Emissionen KW - Bauprodukte KW - Emissionsmesskammern KW - VOC KW - SVOC KW - Geruch KW - AgBB PY - 2010 N1 - Serientitel: VDI Wissensforum – Series title: VDI Wissensforum IS - Seminar 06F0067005 / Kap. 10 SP - 1 EP - 22 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-22358 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Heinrich, Sebastian A1 - Liebner, Christian A1 - Hieronymus, Hartmut A1 - Klemm, E. T1 - Durchführung heterogen katalysierter Selektivoxidationen im Explosionsbereich unter Einsatz von Mikrostrukturreaktoren T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Mikroreaktor KW - Oxidation KW - Explosion PY - 2010 SN - 978-3-89746-119-2 IS - P-03 SP - 1 EP - 6 CY - Frankfurt/M. AN - OPUS4-22359 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Otto, Joachim A1 - Nolde, Moana A1 - Schwarz, Silke A1 - Eckhardt, Dietrich T1 - Explosivstoffe und pyrotechnische Gegenstände KW - Ratgeber zur Ermittlung gefährdungsbezogener Arbeitsschutzmaßnahmen im Betrieb KW - Handbuch für Arbeitsschutzfachleute PY - 2010 SN - 978-3-88261-677-4 N1 - Serientitel: Schriftenreihe der Bundesanstalt für Arbeitsschutz und Arbeitsmedizin – Series title: Schriftenreihe der Bundesanstalt für Arbeitsschutz und Arbeitsmedizin IS - Kap. 5.3 SP - 2.5/28 EP - 2.5/47 PB - Wirtschaftsverlag NW - Verlag für neue Wissenschaft GmbH CY - Bremerhaven AN - OPUS4-22360 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Auersch, Lutz T1 - Theoretical and experimental excitation force spectra for railway-induced ground vibration: vehicle-track-soil interaction, irregularities and soil measurements N2 - Excitation force spectra are necessary for a realistic prediction of railway-induced ground vibration. The excitation forces cause the ground vibration and they are themselves a result of irregularities passed by the train. The methods of the related analyses - the wavenumber integration for the wave propagation in homogeneous or layered soils, the combined finite-element boundary-element method for the vehicle-track-soil interaction - have already been presented and are the base for the advanced topic of this contribution. This contribution determines excitation force spectra of railway traffic by two completely different methods. The forward analysis starts with vehicle, track and soil irregularities, which are taken from literature and axle-box measurements, calculates the vehicle-track interaction and gets theoretical force spectra as the result. The second method is a backward analysis from the measured ground vibration of railway traffic. A calculated or measured transfer function of the soil is used to determine the excitation force spectrum of the train. A number of measurements of different soils and different trains with different speeds are analysed in that way. Forward and backward analysis yield the same approximate force spectra with values around 1 kN for each axle and third of octave. KW - Railway forces KW - Vehicle-track interaction KW - Irregularities KW - Rail roughness KW - Track alignment KW - Wheel out-of-roundness KW - Ground vibration KW - Soil transfer function PY - 2010 DO - https://doi.org/10.1080/00423110802691515 SN - 0042-3114 VL - 48 IS - 2 SP - 235 EP - 261 PB - Taylor & Francis CY - Basingstoke, Hants. AN - OPUS4-22361 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Technische Umsetzung und Verwendung der DIN EN 1504-3 für Instandsetzungsmörtel und -betone in Deutschland T2 - DBV Arbeitstagung: Schutz und Instandsetzung von Betonbauteilen - Aktuelle Regelwerke und Hinweise zum Stand der Technik CY - Berlin, Germany DA - 2010-11-02 PY - 2010 AN - OPUS4-22364 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Urs T1 - The natural pozzolana 'Rhenish trass' and its effect on ASR in concrete T2 - Concrete under severe conditons - Environment and Loading (CONSEC '10) CY - Mérida, Mexico DA - 2010-06-06 PY - 2010 AN - OPUS4-22365 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Askar, Enis A1 - Schröder, Volkmar A1 - Steinbach, J. T1 - Berechnung der Zündtemperatur des Zerfalls von Ethylenoxid und Ethylenoxid/Inertgas-Gemischen in Abhängigkeit vom Druck und vom Behältervolumen T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Zündtemperatur KW - Ethylenoxid KW - Zerfall KW - Sicherheitstechnik PY - 2010 SN - 978-3-89746-119-2 IS - P-14 SP - 1 EP - 14 CY - Frankfurt/M. AN - OPUS4-22386 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian A1 - Adamczyk, Burkart A1 - Brenneis, Rudolf T1 - Möglichkeiten der thermochemischen Behandlung von Reststoffen T2 - ProcessNet Jahrestagung CY - Aachen, Germany DA - 2010-09-21 PY - 2010 AN - OPUS4-22388 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bredow, Andrea A1 - Berger, Wolfgang A1 - Erdmann, Kerstin T1 - Nassmechanische Aufbereitung von Photovoltaik-Dünnschichtmodulen mittels Flotation T2 - Jahrestagung Aufbereitung und Recycling CY - Freiberg/Sa., Deutschland DA - 2010-11-10 PY - 2010 N1 - Geburtsname von Erdmann, Kerstin: Meißner, K. - Birth name of Erdmann, Kerstin: Meißner, K. SP - 13 EP - 14 AN - OPUS4-22389 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Krüger, Oliver T1 - Stand der Entwicklung von Elutionsverfahren für Böden und Bodenmaterialien für prioritäre organische Stoffe T2 - 23. Sitzung des Fachbeirates Bodenuntersuchungen CY - Berlin, Germany DA - 2010-10-19 PY - 2010 AN - OPUS4-22390 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bredow, Andrea A1 - Berger, Wolfgang A1 - Erdmann, Kerstin T1 - Nassmechanische Aufbereitung von Photovoltaik-Dünnschichtmodulen mittels Flotation T2 - Jahrestagung Aufbereitung und Recycling CY - Freiberg, Germany DA - 2010-11-10 PY - 2010 N1 - Geburtsname von Erdmann, Kerstin: Meißner, K. - Birth name of Erdmann, Kerstin: Meißner, K. AN - OPUS4-22391 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Krüger, Oliver T1 - Stand der Arbeiten zum UFOPLAN-Vorhaben "Robustheitstests E DIN 19527" T2 - Workshop/Anwendertreffen Elutionsverfahren im Boden- und Abfallbereich CY - Berlin, Germany DA - 2010-11-09 PY - 2010 AN - OPUS4-22394 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Oliver A1 - Christoph, Gabriele A1 - Kalbe, Ute A1 - Berger, Wolfgang T1 - Praktische Aspekte bei der Durchführung von Elutionsverfahren - Werkstoffauswahl, Gerätschaften, Kosten- und Zeitaufwand T2 - Anwendertreffen Elutionsverfahren CY - Berlin, Germany DA - 2010-11-09 PY - 2010 AN - OPUS4-22395 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Krüger, Oliver T1 - Aspekte der Versuchsplanung von Säulenversuchen - Möglichkeiten der Optimierung und Fallbeispiele T2 - Anwendertreffen Elutionsverfahren im Boden- und Abfallbereich, BAM CY - Berlin, Germany DA - 2010-11-09 PY - 2010 AN - OPUS4-22396 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian A1 - Brenneis, Rudolf T1 - Schlacken/Aschen - Herstellung von Düngemitteln T2 - 19. Kölner Abfalltage Von der Abfallwirtschaft zur Rohstoffwirtschaft CY - Cologne, Germany DA - 2010-11-02 PY - 2010 AN - OPUS4-22397 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Wolfgang T1 - BAM Certified Reference Materials for Surface Chemical and Nano Analysis T2 - International Symposium on Reference Materials NIM 2010 CY - Beijing, China DA - 2010-10-27 PY - 2010 AN - OPUS4-22398 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Wolfgang T1 - Metrological Challenges in Surface Micro/Nano Analysis (SMNA): The activities of the CCQM Surface Analysis Working Group (SAWG) T2 - International Symposium on Reference Materials NIM 2010 CY - Beijing, China DA - 2010-10-27 PY - 2010 AN - OPUS4-22399 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Bernd R. A1 - Trappe, Volker A1 - Goebbels, Jürgen A1 - Hickmann, Stefan A1 - Grasse, Fabian T1 - Non-destructive characterization of composites: From small scale to complex component testing - a challenge T2 - International Symposium on NDT in Aerospace CY - Hamburg, Germany DA - 2010-11-22 PY - 2010 AN - OPUS4-22403 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Auersch, Lutz T1 - Technically induced surface wave fields, Part I: Measured attenuation and theoretical amplitude-distance laws N2 - The attenuation of the amplitudes with distance of technically induced surface wave fields is analyzed in theory and experiments. Experimental results of technically induced ground vibration are presented and collected from literature, which show a power-low attenuation A ~ r–q of amplitudes A with distance r and exponents q > 0.5 higher than for elastic surface waves. Additional attenuation effects are analyzed theoretically. The most important effect is due to the material or scattering damping. Each frequency component is attenuated exponentially as A ~ exp(–kr), but for a broadband excitation, the sum of the exponential laws yields a power law with a higher exponent. Some more effects are discussed, for example the dispersion of the Rayleigh wave due to the layering of the soil, which yields a stronger attenuation A ~ r–q–dq, including an additional exponent of dq = 0.5 in case of an impulsive loading. PY - 2010 DO - https://doi.org/10.1785/0120090228 SN - 0037-1106 SN - 1943-3573 VL - 100 IS - 4 SP - 1528 EP - 1539 PB - Seismological Society of America CY - El Cerito, Calif. AN - OPUS4-22405 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heinrich, Sebastian A1 - Liebner, Christian A1 - Hieronymus, Hartmut A1 - Klemm, E. T1 - Mikrostrukturreaktoren für heterogen katalysierte Selektivoxidationen im Explosionsbereich T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-22366 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Ferrero, Fabio T1 - Brandgefahr: Selbstentzündung von Biomassehalden T2 - 1. C.A.R.M.E.N. Forschungs-Kolloquium "Nachwachsende Rohstoffe" CY - Straubing, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-22367 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knorr, Annett T1 - Exotherme chemische Reaktionen: Grundlagen der Wärmebilanz und Untersuchungsmethoden T2 - Seminar der BG RCI "Sicheres Betreiben chemischer Prozesse, Schwerpunkt Exotherme Reaktionen" CY - Maikammer, Germany DA - 2010-11-08 PY - 2010 AN - OPUS4-22368 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter T1 - Sind DSC Experimente geeignet, um die thermische Stabilität von Dilauroylperoxid vorherzusagen? T2 - 10. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-22369 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schälike, Stefan A1 - Vela-Wallenschus, Iris A1 - Wehrstedt, Klaus-Dieter A1 - Schönbucher, A. T1 - Vorhersage der kritischen thermischen Abstände von LNG-Poolfeuern T2 - 10. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Germany DA - 2010-11-04 PY - 2010 N1 - Geburtsname von Vela-Wallenschus, Iris: Vela, I. - Birth name of Vela-Wallenschus, Iris: Vela, I. AN - OPUS4-22370 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rauchegger, Christian A1 - Schmidt, Dirk A1 - Lohse, Volkmar A1 - Negendank, Detlef A1 - Thévenin, D. T1 - Experimentelle Untersuchungen zur Schwergasausbreitung T2 - Vortrag zur 10. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-22371 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maul, Ronald T1 - Target-Analytik mittels LC-MS/MS als Königsweg in der (Myko-)Toxinanalytik? T2 - Lebensmittelchemisches Seminar, Universität Hamburg, Institut für Lebensmittelchemie CY - Hamburg, Germany DA - 2010-11-26 PY - 2010 AN - OPUS4-22372 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Askar, Enis A1 - Schröder, Volkmar A1 - Acikalin, Hatice Aydan A1 - Steinbach, J. T1 - Berechnung der Zündtemperatur des Zerfalls von Ethylenoxid und Ehylenoxid / Inertags-Gemischen in Abhängigkeit vom Druck und vom Behältnisvolumen T2 - 10. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-22373 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schalau, Bernd A1 - Habib, Abdel Karim T1 - Vergleich von Modellen zur Berechnung einer Lachenverdunstung und -verdampfung T2 - DECHEMA / GVC-Arbeitsausschuss "Sicherheitsgerichtetes Auslegen von Chemieanlagen" CY - Frankfurt am Main, Germany DA - 2010-11-10 PY - 2010 AN - OPUS4-22374 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lohse, Volkmar A1 - Negendank, Detlef T1 - SIL-Anforderungen an Gaswarnsysteme T2 - Vortrag und Seminar der Firma MSA CY - Berlin, Germany DA - 2010-11-10 PY - 2010 AN - OPUS4-22375 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Zscherpel, Uwe A1 - Ewert, Uwe T1 - Bildgebung jenseits von Linsen, "Optik" für hochenergetische Strahlung T2 - Institutsseminar, Frauenhofer-Institut für Naturwissenschaftlich-Technische Trendanalysen INT CY - Euskirchen, Germany DA - 2010-12-08 PY - 2010 AN - OPUS4-22696 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Taffe, Alexander T1 - US und Radar: Lokalisierung von Spanngliedern und Geometrie von Fundamenten T2 - Zielorientierte Bauwerksuntersuchungen mit neueren Zerstörungsfreien Prüfverfahren (ZfP), Bau und Wissen, Forum für Wissenstransfer der Baubranche CY - Möriken-Wildegg, Switzerland DA - 2010-06-06 PY - 2010 AN - OPUS4-22697 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kruschwitz, Sabine A1 - Wiggenhauser, Herbert A1 - Gucunski, N. A1 - Feldmann, Rüdiger T1 - Einsatz zerstörungsfreier Prüfverfahren zur Detection von Ablösungen auf Betonbrückendecks T2 - 70. Jahrestagung der Deutschen Geophysikalischen Gesellschaft (DGG) CY - Bochum, Germany DA - 2010-03-15 PY - 2010 AN - OPUS4-22698 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schwenk, D. A1 - Subaric-Leitis, Andreas ED - Pohl, M. T1 - Qualitätskennzahlen bei der Prüfung und Kalibrierung von Werkstoffprüfmaschinen T2 - DGM-Tagung Werkstoffprüfung 2010 CY - Neu-Ulm, Deutschland DA - 2010-12-02 KW - Spannweite KW - Standardabweichung KW - Materialprüfmaschine PY - 2010 SP - 275 EP - 280 AN - OPUS4-22700 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zscherpel, Uwe A1 - Ewert, Uwe A1 - Jechow, Mirko A1 - Bavendiek, K. T1 - Strategies and New Standards for Film Replacement in Radiography T2 - Vortrag auf dem BAM-Workshop zum Far East Forum on Nondestructive Testing and Evaluation CY - Kunshan, China DA - 2010-05-26 PY - 2010 AN - OPUS4-22701 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina A1 - Bertovic, Marija A1 - Gaal, Mate A1 - Pavlovic, Mato A1 - Rosenthal, Martina A1 - Takahashi, K. A1 - Pitkänen, J. A1 - Ronneteg, U. T1 - Evaluation of Inspection Reliability T2 - NDT-Days 2010 CY - Tallinn, Estonia DA - 2010-03-17 PY - 2010 AN - OPUS4-22703 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schwenk, Christopher A1 - Rethmeier, Michael T1 - Distortion optimisation of beam-welded industrial parts by means of numerical welding simulation KW - Distortion KW - Optimisation KW - Weld plan modification KW - Industrial parts KW - Automotive application KW - Numerical welding simulation KW - Laser beam welding KW - Electron beam welding KW - Finite element analysis KW - FEA PY - 2010 SN - 1741-8410 SN - 1741-8429 VL - 5 IS - 4/5 SP - 412 EP - 422 PB - Inderscience Enterprises Ltd CY - Genève, Switzerland AN - OPUS4-22705 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koshkina, Olga A1 - Bleul, Regina A1 - Bantz, C. A1 - Maskos, Michael T1 - Fluorescent Dye-labeled polyorganosiloxane nanospheres for biomedical applications T2 - 7th International Conference on Biomedical Applications of Nanotechnology CY - Berlin, Germany DA - 2010-12-02 PY - 2010 AN - OPUS4-22717 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - Umsetzung der ErP-Richtlinie und aktuelle Entwicklungen in Deutschland T2 - Abschlusstagung Fraunhofer IPA ExpertenForum; Veranstalter: Verein zur Förderung prokuktionstechnischer Forschung e.V. (FpF) CY - 70569 Stuttgart, Nobelstraße 12, Fraunhofer-Institut für Prokuktionstechnik und Automatisierung (IPA) DA - 2010-12-09 PY - 2010 AN - OPUS4-22719 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gook, Sergej A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Laser-GMA-hybrid welding of large diameter pipes of grade X65 T2 - 2nd South-east european IIW international congress - "Welding - high-tech technology in the 21st century" CY - Sofia, Bulgaria DA - 2010-10-21 KW - High-power laser KW - Fiber laser KW - Pipeline KW - Hybrid welding KW - Girth welding PY - 2010 SN - 978-954-9322-25-5 SP - 139 EP - 144 AN - OPUS4-22720 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thater, Raphael A1 - Perret, William A1 - Schwenk, Christopher A1 - Alber, U. A1 - Rethmeier, Michael T1 - Industrial application of welding temperature field and distortion visualization using FEA N2 - The non-uniform heat input during the welding process leads to problematic permanent deformations of welded parts. The control of these welding distortions is, with the absence of the knowledge of the fundamental mechanisms responsible for these deformations, an extremely time and cost consuming iterative “trial-and-error” optimization process. The visualization of the involved physical phenomena, like temperature and distortions, .is an indispensable tool to clearly identify these mechanisms in order to adapt the welding parameters and clamping conditions target-oriented. Both experimental and virtual methods exist to obtain these physical data, however the possibilities to visualize them with experimental methods are laborious, expensive and limited in their application. Welding Simulation using finite element analysis (FEA) offers many benefits and has a great potential to reduce the experimental effort. Nevertheless, the industrial application of welding Simulation is not yet established widely because of reservations regarding the computation costs and the resulting accuracy for instance. In this paper, the results of a case study for a welding Simulation with an industrial background are presented. A welded assembly from the automotive industry has been investigated with numerical and experimental methods. A comparison between both methods demonstrates the Potentials of welding Simulation in terms of visualization. Furthermore, the numerical results reveal the possibilities of current resources. regarding calculation time and result accuracy of an industrial applied welding Simulation. T2 - VISUAL-JW 2010 - The international symposium on visualization in joining & welding science through advanced measurements and simulation CY - Osaka, Japan DA - 11.11.2010 KW - Numerical welding simulation KW - Temperature field KW - Distortion KW - Industrial application KW - Automotive assembly PY - 2010 VL - 1 IS - PT-31 SP - 245 EP - 246 AN - OPUS4-22721 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Stoppel, Markus A1 - Taffe, Alexander A1 - Kurz, J.H. A1 - Reichling, K. ED - Gieler-Breßmer, S. T1 - Zustandsermittlung und Schadensdiagnose für Parkhäuser mit automatisierten zerstörungsfreien Prüfverfahren T2 - 4. Kolloquium Verkehrsbauten - Schwerpunkt Parkhäuser CY - Ostfildern, Deutschland DA - 2010-02-02 KW - BetoScan KW - Betonflächendiagnose KW - Scanner KW - ZfP im Bauwesen PY - 2010 SN - 3-924813-82-5 IS - Kap. 11.1 SP - 1 EP - 9 CY - Ostfildern AN - OPUS4-22722 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kurz, J.H. A1 - Stoppel, Markus A1 - Taffe, Alexander A1 - Dobmann, G. ED - Thompson, D.O. ED - Chimenti, D.E. T1 - Control and data acquisition of automated multi-sensor systems - two examples from civil engineering T2 - 36th Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Kingston, RI, USA DA - 2009-07-26 KW - Civil engineering KW - Multi-sensor KW - Ultrasound KW - Radar KW - Eddy current KW - Potential methods PY - 2010 SN - 978-0-7354-0748-0 SN - 0743-0760 SN - 0094-243X N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings SP - 1789 EP - 1794 CY - Melville, NY AN - OPUS4-22723 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Bernd R. A1 - Trappe, Volker A1 - Goebbels, Jürgen A1 - Hickmann, Stefan A1 - Grasse, Fabian T1 - Non-destructive characterization of composites: from small scale to complex component testing - a challenge T2 - International Symposium on NDT in Aerospace CY - Hamburg, Germany DA - 2010-11-22 KW - Aircraft KW - Wind turbine blades KW - Automotive KW - X-ray refraction KW - Fibre orientation KW - WAXS technique KW - X-ray computed tomography PY - 2010 SN - 978-3-940283-28-3 IS - DGZfP-BB 124 (Tu.2.B.1) SP - 1 EP - 6 AN - OPUS4-22724 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Michael T1 - On the creep rupture prediction of composite pressure vessels N2 - This article illustrates a concept of predicting the time dependent deformation and creep rupture strength of carbon fibre reinforced plastics (CFRP). In the presented concept the viscoelastic behaviour of the resin is determined by creep rupture tests at different temperature and load levels. Out of the experiments the relaxation spectrum of the resin is modelled including the spread. With the help of the classical rule of mixture and a modified classical laminate theory the minimum strain rate for the composite will be determined. The results will be compared to experimental data. Furthermore the Monkman-Grant approach is used to determine the time-to-failure strain-rate relation. Therefore an elastic solution of the classical laminate theory is used including Puck´s failure criteria to compute the Monkman-Grant relation. A Monte Carlo Simulation will be done to include the spread of the Monkman-Grant relation. The results will be compared to experimental results of unidirectional specimens. Finally it will be explained how the lifetime of a pressure vessel can be computed using the explained concept. T2 - ASME 2010 Pressure vessels & piping conference CY - Bellevue, Washington, USA DA - 2010-07-18 PY - 2010 IS - PVP2010-26034 SP - 1 EP - 11 PB - American Society of Mechanical Engineers CY - New York AN - OPUS4-22725 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaenisch, Gerd-Rüdiger A1 - Bellon, Carsten A1 - Ewert, Uwe T1 - Simulation supported reliability analysis in radiography T2 - 10th European conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 KW - Simulation KW - Zuverlässigkeit KW - POD PY - 2010 IS - Paper 4.02.18 SP - 1 EP - 13 AN - OPUS4-22767 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günzel, Stephan T1 - BETRIEBSFESTIGKEIT KURZFASERVERSTÄRKTER THERMOPLASTE - EIN NEUES FASERVERBUND-ORIENTIERTES AUSLEGUNGSKONZEPT UNTER BERÜCKSICHTIGUNG DES SCHÄDIGUNGSMECHANISMUS T2 - 37. Tagung des DVM-Arbeitskreises Betriebsfestigkeit: "Auslegungs- und Absicherungskonzepte der Betriebsfestigkeit - Potenziale und Risiken" CY - Munich, Germany DA - 2010-10-06 PY - 2010 AN - OPUS4-22768 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günzel, Stephan T1 - Zerstörungsfreie Prüfung und Charakterisierung der Schädigung kurzfaserverstärkter Thermoplaste unter Betriebsbelastung T2 - Internationale AVK-Tagung CY - Essen, Germany DA - 2010-09-13 PY - 2010 AN - OPUS4-22769 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Musolff, André A1 - Droste, Bernhard A1 - Quercetti, Thomas A1 - Müller, Karsten T1 - Durchführung experimenteller Fallprüfungen im Rahmen der mechanischen Bauartprüfung von Transportbehältern für radioaktive Stoffe T2 - Jahrestagung Kerntechnik 2010 CY - Berlin, Deutschland DA - 2010-05-04 PY - 2010 SP - 1 EP - 7 CY - Berlin AN - OPUS4-22770 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Musolff, André A1 - Quercetti, Thomas A1 - Müller, Karsten A1 - Droste, Bernhard A1 - Komann, Steffen T1 - Drop test program with the half-scale model CASTOR HAW/TB2 T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Spent fuel transport cask KW - Drop test KW - Impact limiter KW - Measurement procedure PY - 2010 SP - 1 EP - 8 AN - OPUS4-22771 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Development of a modular system for the protection and repair of concrete structures KW - Repair mortar KW - Repair systems KW - Polymer cement concrete (PCC) KW - Sprayed polymer cement concrete (SPCC) PY - 2010 SN - 1864-7251 SN - 0947-4498 VL - 16 IS - 4/5 SP - 387 EP - 400 PB - Aedificatio Publ. CY - Freiburg AN - OPUS4-22773 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lenke, Philipp A1 - Wendt, Mario A1 - Liehr, Sascha A1 - Krebber, Katerina ED - Santos, J.L. ED - Culshaw, B. ED - López-Higuera, J.M. ED - MacPherson, W.N. T1 - Distributed humidity sensing based on Rayleigh scattering in polymer optical fibers N2 - In this document a new distributed sensor based on Rayleigh scattering in polymer optical fibers (POF) is proposed and first measurement results of the proposed sensor are shown. Different from Silica glas optical fibers POF absorb high quantities of water resulting in a change of their molecular structure and thereby reducing the present small scattering centers in areas of high humidity. The interdependence between scattering intensity and relative humidity is being investigated in case of steady cycles as well as stepwise changes of humidity and in the presence of moisture. A quantitative measure of humidity and scattering is presented. T2 - 4th European workshop on optical fibre sensors CY - Porto, Portugal DA - 2010-09-08 KW - POF KW - Distributed sensing KW - Rayleigh KW - Scattering KW - OTDR KW - Humidity PY - 2010 SN - 978-0-8194-8083-5 DO - https://doi.org/10.1117/12.866279 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 7653 SP - 76533X-1 - 76533X-4 PB - SPIE, the International Society for Optical Engineering CY - Bellingham, Wash. AN - OPUS4-22686 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Subaric-Leitis, Andreas T1 - Risikoanalyse multivariater Konformitätsprüfungen N2 - Bei Konformitätsentscheidungen müssen in der Regel mehrere Spezifikationen bzgl. unterschiedlicher Eigenschaften gleichzeitig eingehalten werden, was zu erhöhten Risiken führen kann. In dem Beitrag werden Verfahren zur Bestimmung der Entscheidungssicherheit bzw. der Irrtumswahrscheinlichkeit bei multivariaten Konformitätsprüfungen dargestellt. Auf die Berücksichtigung von möglichen Korrelationen zwischen den bewerteten Größen des Untersuchungsobjektes wird eingegangen. Grundlage des Verfahrens bildet die Bayes'sche Statistik. KW - Conformance test KW - Limit value KW - Risk of decision KW - Multi-dimensional distribution KW - Multivariate normal distribution KW - Konformitätstest KW - Grenzwert KW - Entscheidungsrisiko KW - Mehrdimensionale Verteilung KW - Multivariate Normalverteilung PY - 2010 DO - https://doi.org/10.1524/teme.2010.0091 SN - 0340-837X SN - 0178-2312 SN - 0171-8096 VL - 77 IS - 12 SP - 662 EP - 670 PB - Oldenbourg CY - München AN - OPUS4-22687 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zscherpel, Uwe A1 - Bellon, Carsten A1 - Ewert, Uwe A1 - Jaenisch, Gerd-Rüdiger A1 - Alekseychuk, Oleksandr A1 - Pittlick, A. T1 - Erfahrung bei der Radiographieausbildung mittels virtueller Durchstrahlungstechnik T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-22689 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zscherpel, Uwe A1 - Ewert, Uwe A1 - Fratzscher, Daniel A1 - Alekseychuk, Oleksandr T1 - Entwicklung und Optimierung eines kosteneffektiven digitalen bildgebenden Röntgendetektors T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-22691 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Resch-Genger, Ute A1 - DeRose, P.C. T1 - Fluorescence standards: Classification, terminology, and recommendations on their selection, use, and production (IUPAC Technical Report) N2 - Chromophore-based fluorescence standards for the characterization of photo-luminescence measuring systems and the determination of relevant fluorometric quantities are classified according to their scope and area of application. General and type-specific requirements for suitable standards are derived for each class of standards. Metrological requirements linked to the realization of comparable measurements are addressed and recommendations on selecting, using, and developing fluorescence standards are given. KW - Chromophore-based fluorescence standards KW - Fluorometric quantities KW - IUPAC analytical chemistry division KW - IUPAC organic and biomolecular chemistry division KW - IUPAC physical and biophysical chemistry division KW - Photoluminescence KW - Standards PY - 2010 DO - https://doi.org/10.1351/PAC-REP-09-09-02 SN - 0033-4545 SN - 1365-3075 VL - 82 IS - 12 SP - 2315 EP - 2335 PB - Union CY - Research Triangle Park, NC AN - OPUS4-22693 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zscherpel, Uwe A1 - Ewert, Uwe A1 - Bavendiek, K. T1 - Film Replacement by Digital Industrial Radiology and High Contrast Sensitivity Technique T2 - Eingeladener Vortrag auf der 10th COTEQ (Conferencia Sobre Tecnologia de Equipamentos CY - Salvador, Brazil DA - 2010-05-12 PY - 2010 AN - OPUS4-22694 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zscherpel, Uwe A1 - Rost, P. T1 - Digital Radiology for Corrosion and Weld Inspection - Applications in Chemical Industry T2 - Vortrag auf dem BAM-Workshop zum Far East Forum on Nondestructive Testing and Evaluation CY - Kunshan, China DA - 2010-05-26 PY - 2010 AN - OPUS4-22695 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Steinborn, Gabriele A1 - Scheler, S. A1 - Lehmann, J. T1 - Particle size determination at different concentrated Al2O3 and SiO2 nanopowder suspensions with the ultrasonic spectrometer DT 1200 T2 - WCPT6 2010 - World congress on particle technology CY - Nürnberg, Germany DA - 2010-04-26 KW - Partikelgrößenbestimmung KW - Zetapotential KW - Nanopulver PY - 2010 SN - 978-3-00-030570-2 IS - H H 1 0 00312 SP - 1 EP - 4 AN - OPUS4-22727 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Anka A1 - Krüger, Simone A1 - Krause, Ulrich T1 - Chemisch-analytische Untersuchung von Brandprodukten aus verschiedenen Deponiefraktionen T2 - 4. Praxistagung Deponie 2010 CY - Hannover, Deutschland DA - 2010-11-30 KW - Recyclingstoffe KW - Zwischenlager KW - FTIR-Spektroskopie KW - Verschwelung KW - Rauchgasanalyse KW - Recycling materials KW - Intermediate storage KW - FTIR-spectroscopy KW - Smouldering KW - Analysis of smoke PY - 2010 SN - 978-3-86955-555-3 SP - 1 EP - 17(?) AN - OPUS4-22728 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cristol, A.L. A1 - Desplanques, Y. A1 - Österle, Werner A1 - Degallaix, G. T1 - Coupling between thermal localisation and friction mechanisms: heat accumulation effect N2 - Heat accumulation induced by a succession of railway brakings leads to changes of the friction conditions occurring in pad-disc contact. Infrared thermography observations show a progressive increase of surface temperature over the succession, as well as a modification of the hot band migration phenomenon. From a tribological point of view, the heat accumulation, accompanied by a wear increase, progressively modifies the friction behaviour from one braking to the next. Post-mortem observations of pads are performed on surface by scanning electron microscopy and in depth after Focus Ion Beam cut by scanning ion microscopy. Observations show that, with heat accumulation, the third body quantity rises inside the contact, in accordance with wear increase. It is concluded that source flows of third body, which increase with temperature, feed aplenty the contact and modify its load-bearing capacity. T2 - JEF 2010 - 6th European conference on braking CY - Lille, France DA - 2010-11-24 KW - Successive braking KW - Heat accumulation KW - Thermal localisation KW - Wear KW - SEM KW - FIB PY - 2010 SP - 61 EP - 69 AN - OPUS4-22729 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Manke, I. A1 - Hartnig, C. A1 - Kardjilov, N. A1 - Riesemeier, Heinrich A1 - Goebbels, Jürgen A1 - Kuhn, R. A1 - Krüger, P. A1 - Banhart, J. T1 - In situ synchrotron X-ray radiography investigations of water transport in PEM fuel cells N2 - Water transport in an operating PEM fuel cell was investigated with synchrotron X-ray radiography with a spatial resolution of 3 µm and a temporal resolution of 5 s. This method allows for the detection of water accumulations with less than 10 µm diameter. We demonstrate that synchrotron X-ray imaging can dramatically expand the possibilities of imaging with high spatial and time resolution, especially as a complement to neutron radiography. Water transport processes from the first appearance of small water accumulations in the gas diffusion layer to their transport into the channel system were analysed in situ. Correlations between local effects such as water formation and operating conditions of the whole system, e.g. power variations, were found. A recently described eruptive water transport mechanism is analysed in detail. KW - Fuel cell KW - Gas diffusion layer KW - Imaging KW - Synchrotron KW - X-ray radiography KW - Two-phase flow KW - Water transport PY - 2010 DO - https://doi.org/10.1002/fuce.200800123 SN - 1615-6846 SN - 1615-6854 VL - 10 IS - 1 SP - 26 EP - 34 PB - Wiley-VCH CY - Weinheim AN - OPUS4-22730 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rack, A. A1 - Stiller, M. A1 - Nelson, K. A1 - Knabe, C. A1 - Rack, T. A1 - Zabler, S. A1 - Dalügge, O. A1 - Riesemeier, Heinrich A1 - Cecilia, A. A1 - Goebbels, Jürgen T1 - Ex vivo and in vitro synchrotron-based micro-imaging of biocompatible materials applied in dental surgery N2 - Biocompatible materials such as porous bioactive calcium phosphate ceramics or titanium are regularly applied in dental surgery: ceramics are used to support the local bone regeneration in a given defect, afterwards titanium implants replace lost teeth. The current gold standard for bone reconstruction in implant dentistry is the use of autogenous bone grafts. But the concept of guided bone regeneration (GBR) has become a predictable and well documented surgical approach using biomaterials (bioactive calcium phosphate ceramics) which qualify as bone substitutes for this kind of application as well. We applied high resolution synchrotron microtomography and subsequent 3d image analysis in order to investigate bone formation and degradation of the bone substitute material in a three-dimensional manner, extending the knowledge beyond the limits of classical histology. Following the bone regeneration, titanium-based implants to replace lost teeth call for high mechanical precision, especially when two-piece concepts are used in order to guaranty leak tightness. Here, synchrotron-based radiography in comparison with classical laboratory radiography yields high spatial resolution in combination with high contrast even when exploiting micro-sized features in these kind of highly attenuating objects. Therefore, we could study micro-gap formation at interfaces in two-piece dental implants with the specimen under different mechanical load. We could prove the existence of micro-gaps for implants with conical connections as well as to study the micromechanical behavior of the mating zone of conical implants during loading. The micro-gap is a potential issue of failure, i. e. bacterial leakage which can induce an inflammatory process. T2 - SPIE Conference 7804 - Developments in X-ray tomography VII CY - San Diego, CA, USA DA - 2010-08-02 KW - Microtomography KW - Synchrotron radiation KW - Radiography KW - Dental implants KW - Bioceramics KW - Implant-abutment interface PY - 2010 DO - https://doi.org/10.1117/12.858435 SN - 0277-786X N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series VL - 7804 SP - 78040E-1 - 78040E-8 AN - OPUS4-22731 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rücker, Werner A1 - Baeßler, Matthias A1 - Karabeliov, Krassimire T1 - Überwachungsverfahren und Bewertungsmodell für die Gründungen von Offshore Windkraftanlagen T2 - RAVE Symposium; BAM CY - Berlin, Germany DA - 2010-10-14 PY - 2010 AN - OPUS4-22732 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rohrmann, Rolf A1 - Thöns, Sebastian A1 - Rücker, Werner A1 - Bicker, S. A1 - Said, Samir A1 - Schmid, Wolfgang T1 - Structural Investigations and Monitoring Results on a Prototype of Offshore Wind Turbines of Multibrid M 5000 Series T2 - DEWEK 2010, 10th German Wind Energy Conference CY - Bremen, Germany DA - 2010-11-17 PY - 2010 AN - OPUS4-22733 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Quasi-Wasserstoffplasma und Nitrilgruppenentstehung T2 - Plasma Germany CY - Dresden, Germany DA - 2010-05-05 PY - 2010 AN - OPUS4-22734 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Adhäsions-Verbesserung der Haftung zwischen Metallen, Carbonanotubes und Polymeren T2 - Vortrag, Chemieverein Erkner CY - Erkner, Germany DA - 2010-03-17 PY - 2010 AN - OPUS4-22735 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Pistol, Klaus A1 - Prinz, Carsten A1 - Weise, Frank A1 - Klobes, Peter T1 - Strukturveränderungen in Selbstverdichtendem Beton (SVB) infolge Hochtemperaturbeanspruchung T2 - XV. Workshop über die Charakterisierung von feinteiligen und porösen Festkörpern CY - Bad Soden, Germany DA - 2010-11-16 PY - 2010 AN - OPUS4-22757 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rücker, Werner A1 - Lüddecke, F. T1 - Experimentelle Modellverifikation zur Optimierung von Tragwerkselementen aus Stahlguss T2 - OGOWin Abschlussveranstaltung CY - Bremerhaven, Germany DA - 2010-05-31 PY - 2010 AN - OPUS4-22758 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Scheid, Marc T1 - Staubexplosionsgefahren bei der Oberflächenbearbeitung von Metallen und Leichtmetallen KW - Staubbrände KW - Staubexplosionen KW - Brenn- und Explosionskenngrößen von Stäuben KW - Explosionsereignisse KW - Gefährdungsbeurteilung KW - Schutzmaßnahmen KW - Brand- und Explosionsschutz an Strahlanlagen PY - 2010 SN - 978-3-941441-61-3 SN - 0544-7119 IS - 54 SP - 41 EP - 46 PB - Verl. Technik & Information CY - Bochum AN - OPUS4-22759 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krietsch, Arne A1 - Scheid, Marc T1 - Tests on suitability of a new pyrotechnical igniter for the determination of explosion characteristics of dust clouds in 20-L-sphere and 1-m³-vessel T2 - 8th ISHPMIE - International symposium on hazards, prevention, and mitigation of industrial explosions CY - Yokohama, Japan DA - 2010-09-05 KW - Explosion characteristics of dusts KW - 20-L-sphere KW - 1-m³-vessel KW - Pyrotechnical igniter KW - Dust explosion testing PY - 2010 IS - ISH021 SP - 1 EP - 9 AN - OPUS4-22760 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stahmer, K.-W. A1 - Teske, J. A1 - Scheid, Marc T1 - Brennbare Stäube in Strahlanlagen N2 - Im Institut für Arbeitsschutz der Deutschen Gesetzlichen Unfallversicherung (IFA) werden seit vielen Jahren industrielle Stäube auf ihre Explosionsgefahren untersucht. Die Analyse erfolgt auf der Grundlage von standardisierten Verfahren. Die ermittelten Daten werden anonymisiert in der GESTIS- Staub-Ex-Datenbank veröffentlicht und stehen Anwendern und Projektplanern zur Verfügung. In der Datenbank sind zurzeit 210 Strahlstäube mit insgesamt 527 Datensätzen gespeichert. Wenngleich die Übernahme einzelner Datensätze für die eigene betriebliche Risikobeurteilung nur unter Einschränkung möglich ist, können aus der Auswertung von Datenkollektiven wertvolle Informationen für Hersteller und Betreiber gewonnen werden. Die Auswertung hilft, das Risiko bei der Freisetzung von Strahlstäuben näher zu bestimmen und notwendige Schutzmaßnahmen entsprechend auszuwählen. Sie ersetzt nicht die betriebliche Ermittlung einer gefährlichen explosionsfähigen Atmosphäre und die Zündquellenanalyse vor Ort. KW - Brenn- und Explosionskenngrößen KW - Brennbare Stäube KW - Brand- und Explosionsgefahren KW - Schutzmaßnahmen PY - 2010 SN - 1434-9728 SN - 1436-4948 SN - 0372-2457 SN - 0376-1185 VL - 51 IS - 10 SP - 12 EP - 18 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-22761 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Scheid, Marc A1 - Siwek, R. T1 - Brand- und Explosionsschutz an Entstaubungsanlagen - Neue VDI-Richtlinien 2263 Blatt 6 und 6.1 T2 - VDI-Fachtagung - Sichere Handhabung brennbarer Stäube CY - Nürnberg, Deutschland DA - 2010-11-16 KW - Entstaubungsanlagen KW - VDI-Richtlinie 2263 KW - Absauganlagen KW - Explosionsgefahren KW - Risikobeurteilung KW - Explosionsschutzmaßnahmen PY - 2010 SN - 978-3-18-092096-2 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 2096 SP - 167 EP - 183 AN - OPUS4-22762 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zhukovskiy, M. A1 - Skachkov, M. A1 - Jaenisch, Gerd-Rüdiger A1 - Bellon, Carsten A1 - Deresch, Andreas T1 - Monte Carlo simulating the electron emission from surfaces of objects being under radiation T2 - 10th European conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 KW - Simulation KW - Elektronentransport PY - 2010 IS - Paper 4.02.18 SP - 1 EP - 10 AN - OPUS4-22764 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaenisch, Gerd-Rüdiger A1 - Ewert, Uwe A1 - Jechow, Mirko T1 - Scatter radiation in radiography T2 - 10th European conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 KW - Simulation KW - Streustrahlung KW - Abbildungskontrast KW - Bildqualität PY - 2010 IS - Paper 4.02.18 SP - 1 EP - 9 AN - OPUS4-22765 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Deresch, Andreas A1 - Jaenisch, Gerd-Rüdiger A1 - Bellon, Carsten A1 - Warrikhoff, A. T1 - Optimization of X-ray sources by modeling T2 - 10th European conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 KW - Simulation KW - Elektronentransport KW - Röntgenquellen PY - 2010 IS - Paper 4.02.18 SP - 1 EP - 10 AN - OPUS4-22766 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Taffe, Alexander A1 - Hillemeier, B. A1 - Walther, A. T1 - Verifizierung moderner zerstörungsfreier Prüfverfahren an einem Abbruchbauwerk N2 - Die Entwicklung zerstörungsfreier Prüfverfahren im Bauwesen (ZfPBau-Verfahren) hat in den letzten Jahren zu einer rasanten Leistungssteigerung geführt. Etliche Verfahren haben das Potenzial, in der Zukunft vom 'Stand der Wissenschaft' zum 'Stand der Technik' zu werden. Damit dies geschieht, muss möglichen Kunden vermittelt werden, welche Prüfaufgabe mit welchem Verfahren bearbeitet werden kann und wie zuverlässig die Ergebnisse sind. Um die Leistungsfähigkeit von ZfPBau-Verfahren nachzuweisen, ist eine genaue Kenntnis des wirklichen Bestands und der tatsächlichen Schäden erforderlich, um diese mit den Messergebnissen zu vergleichen und deren Güte zu bewerten. Mit dem Abriss der Spandauer- Damm-Brücke in Berlin ergab sich die Gelegenheit, zunächst eine großflächige Zustandsermittlung der Fahrbahnplatte bezüglich des Grads vorhandener Korrosionsschäden und des Verpresszustands von Spanngliedern vorzunehmen. Durch den vorgefundenen Zustand der Quervorspannung mit nachweislich vorhandenen Brüchen der Spanndrähte konnte an diesem Abrissbauwerk die Leistungsfähigkeit des Remanenzmagnetismusverfahrens zur Ortung von Spanndrahtbrüchen erstmals großflächig nachgewiesen werden, wobei auch der Vergleich der Untersuchungen mit und ohne Fahrbahnbelag durchgeführt wurde. Da der Anteil an vorhandenen Verpressfehlern nach großflächiger Auswertung sich als sehr gering herausstellte und an den ausgelösten Brückenteilen keine Verpressfehler vorhanden waren, wird in diesem Beitrag die Leistungsfähigkeit der Kombination von Radar und Ultraschall mit bildgebender Darstellung gezeigt. Damit wird es künftig möglich sein, Informationen zur Rekonstruktion nicht vorhandener Bestandspläne zu gewinnen. KW - Zerstörungsfreie Prüfung im Bauwesen KW - Bauen im Bestand KW - Brückenprüfung KW - Spanndrahtbruch KW - Remanenzmagnetismus KW - Automatisierung PY - 2010 DO - https://doi.org/10.1002/best.201000067 SN - 0005-9900 SN - 1437-1006 VL - 105 IS - 12 SP - 813 EP - 820 PB - Ernst CY - Berlin AN - OPUS4-22706 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Raedel, Martina A1 - Bücker, Michael A1 - Unger, Brita T1 - Historische und moderne Goldmosaike im Vergleich KW - Historische und moderne Goldmosaike KW - Aufbau KW - Besonderheiten KW - Herstellungstechnik KW - Glaszusammensetzung KW - EDX-Analyse KW - Viskositäts-Temperatur-Verhalten KW - Ausdehnungskoeffizient PY - 2010 SN - 0947-6229 IS - 3 SP - 184 EP - 185 PB - Dt. Bergbau-Museum CY - Bochum AN - OPUS4-22707 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pistol, Klaus A1 - Prinz, Carsten A1 - Weise, Frank A1 - Klobes, Peter T1 - Analysis of thermal induced microstructural changes in self-compacting concrete using mercury porosimetry T2 - XV. Workshop über die Charakterisierung von feinteiligen und porösen Festkörpern CY - Bad Soden, Germany DA - 2010-11-16 PY - 2010 AN - OPUS4-22708 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lehmann, Christian A1 - Fontana, Patrick A1 - Müller, Urs A1 - Meng, Birgit T1 - Influence of mineral additions on CSH phase assemblage in autoclaved Ultra-High Performance Concrete T2 - Cement and Concrete Science 2010 CY - Birmingham, England DA - 2010-09-13 PY - 2010 AN - OPUS4-22710 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka A1 - Krüger, Simone A1 - Krause, Ulrich T1 - Chemisch-analytische Untersuchung von Brandprodukten aus verschiedenen Deponiefraktionen T2 - Praxistagung Deponie 2010, Wasteconsult International CY - Hanover, Germany DA - 2010-11-30 PY - 2010 AN - OPUS4-22711 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Ulrich A1 - Knaust, Christian T1 - Ermittlung von Brandlasten in Industrieanlagen und -bauwerken T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-22712 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malitte, Hans-Joachim T1 - Strahlenschutz bei Legierungsanalysatoren - mobile Röntgenfluoreszenzgeräte (RFA) - T2 - Strahlenschutzsymposium CY - Stuttgart, Germany DA - 2010-11-08 PY - 2010 AN - OPUS4-22715 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gumenyuk, Andrey A1 - Gook, Sergej A1 - Quiroz Penaranda, Vanessa A1 - Rethmeier, Michael T1 - Vorteile der Laser-MSG-Hybrid-Technologie beim Schweißen von Rohrkonstruktionen T2 - 6. Deutsch-Niederländische Lasertage Wesser-Ems CY - Papenburg, Germany DA - 2010-05-19 PY - 2010 AN - OPUS4-22747 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gumenyuk, Andrey A1 - Gook, Sergej A1 - Rethmeier, Michael T1 - Welding of Thick Materials with High Brightness High Power Fiber Laser T2 - 5th International Symposium on High Power Fiber Laser and Their Applications CY - Saint Petersburg, Russia DA - 2010-06-29 PY - 2010 AN - OPUS4-22748 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - Polyalkyleneglycols as next generation engine oils T2 - Symposium on Testing and Use of Environmentally Acceptable Lubricants CY - Jacksonville, FL, USA DA - 2010-12-06 PY - 2010 AN - OPUS4-22749 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias A1 - Spaltmann, Dirk A1 - von Gablenz, A. T1 - Functional profiles of lubricants and fuels based on second generation plant oils T2 - Symposium on Testing and Use of Environmentally Acceptable Lubricants CY - Jacksonville, FL, USA DA - 2010-12-06 PY - 2010 AN - OPUS4-22750 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gorbushina, Anna T1 - Idealbiofilme als neues Testsystem: Laborsimulation der Gesteins- und Materialverwitterung T2 - Kolloquium des Instituts für Geologische Wissenschaften an der FU Berlin CY - Berlin, Germany DA - 2010-12-09 PY - 2010 AN - OPUS4-22751 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scheid, Marc T1 - VDI-Richtlinien 2263 Blatt 7 und 7.1 Staubbrände und Staubexplosionen Gefahren - Beurteilung - Schutzmaßnahmen Brand- und Explosionsschutz an Sprühtrocknungsanlagen T2 - 10. Erfahrungsaustausch "Erstellung des Explosionsschutzdokumentes" des BG-Fachausschusses "Metall und Oberflächenbehandlung" CY - Hanover, Germany DA - 2010-10-18 PY - 2010 AN - OPUS4-22752 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scheid, Marc A1 - Siwek, R. T1 - Brand- und Explosionsschutz an Entstaubungsanlagen - Neue VDI-Richtlinie 2263 Blatt 6 und 6.1 T2 - VDI-Fachtagung mit Ausstellung "Sichere Handhabung brennbarer Stäube" CY - Nuremberg, Germany DA - 2010-11-16 PY - 2010 AN - OPUS4-22753 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scheid, Marc A1 - Krietsch, Arne T1 - Brand- und Explosionsgefahren bei der Handhabung von Nanostäuben oder ultrafeinen Partikeln mit Korngrößen < 1 µm T2 - Jahrestreffen des Fachausschusses "Chemie", Arbeitskreis "Explosionsschutz" CY - Heidelberg, Germany DA - 2010-11-25 PY - 2010 AN - OPUS4-22754 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie T1 - Measurements, NDT and laboratory testing of the wrought iron bridge at Berlin-Friedrichstraße T2 - Schulung der Internationalen Eisenbahnbehörde zu Ergebnissen des Projektes Sustainable Bridges CY - Frankfurt am Main, Germany DA - 2010-11-03 PY - 2010 AN - OPUS4-22755 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebs, Holger T1 - Stand der Ladetechnologie in Deutschland - Arbeiten zum Laden/Mischladen loser Sprengstoffe in der Fachrichtung Bergbau-Tiefbau T2 - Ehrenkolloquium, 75. Geburtstag Prof. Dr.-Ing. habil. Dr. h. c. Gerhardt, Bergakademie Freiberg CY - Freiberg, Germany DA - 2010-03-03 PY - 2010 AN - OPUS4-22756 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Plasma Polymerization Mechanism T2 - Vortrag im Fachausschuß Plasma und Polymere, Plasma Germany CY - Aachen, Germany DA - 2010-11-15 PY - 2010 AN - OPUS4-22736 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian A1 - Wettmarshausen, Sascha T1 - Functionalization of polyolefin surfaces and grafting of molecules with complex architecture T2 - ASPC Leoben CY - Leoben, Austria DA - 2010-09-08 PY - 2010 AN - OPUS4-22737 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Study of Metal-Polymer Interfaces: Relevance to Adhesion T2 - ACS spring meeting CY - Boston, MA, USA DA - 2010-08-21 PY - 2010 AN - OPUS4-22738 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Erfahrungsaustaussch: Oberflächentechnologie mit Plasma- und Ionenstrahlprozessen T2 - Vortrag CY - Klingenthal, Germany DA - 2010-03-02 PY - 2010 AN - OPUS4-22739 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter A1 - Schönbucher, A. T1 - Pool and tank fires - Are we really prepared? T2 - Eighth Asia-Pacific Conference on Combustion (ASPACC-10) CY - Hyderabad, India DA - 2010-12-10 PY - 2010 AN - OPUS4-22741 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gook, Sergej A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Laser-GMA-Hybrid Welding of Large Diameter Pipes of Grade X65 T2 - The 2nd South-East European IIW International Congress: Welding-High-Tech Technology in 21st century CY - Sofia, Bulgaria DA - 2010-10-21 PY - 2010 AN - OPUS4-22742 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Quiroz Penaranda, Vanessa A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Laser beam welding of austenitic manganese-alloyed stainless steels T2 - 10th Brazilian Stainless Steel Conference - Intern. Ed. - INOX 2010 CY - Rio de Janeiro, Brazil DA - 2010-09-20 PY - 2010 AN - OPUS4-22743 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gumenyuk, Andrey A1 - Gook, Sergej A1 - Quiroz Penaranda, Vanessa A1 - Rethmeier, Michael T1 - Progress in welding application of high power fiber and disk lasers T2 - 6th International Laser Symposium Fiber & Disc (FiSC 2010) CY - Dresden, Germany DA - 2010-10-05 PY - 2010 AN - OPUS4-22745 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kannengießer, Thomas A1 - Kromm, Arne A1 - Brauser, Stephan T1 - Synchrotron Diffraction for Visualization of Solid State Phase Transformations T2 - VISUAL - The International Symposium on Visualization in Joining & Welding Science Through Advanced Measurements and Simulation CY - Osaka, Japan DA - 2010-11-22 PY - 2010 AN - OPUS4-22746 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Karsten T1 - Experimentelle ehälter- und Komponentenprüfungen von Gefahrgutverpackungen T2 - Symposium "Bruchmechanische Werkstoff- und Bauteilbewertung" CY - Freiberg, Germany DA - 2010-03-05 PY - 2010 AN - OPUS4-23540 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rücker, Werner A1 - Rohrmann, Rolf A1 - Fritzen, C.-P. A1 - Trappe, Volker A1 - Habel, Wolfgang A1 - Grasse, Fabian T1 - Results and Experiences from the Research Project IMO-WIND T2 - DEWEK 2010, 10th German Wind Energy Conference CY - Bremen, Germany DA - 2010-11-17 PY - 2010 AN - OPUS4-23580 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hodoroaba, Vasile-Dan A1 - Rackwitz, Vanessa A1 - Reuter, Dirk T1 - Challenges for an accurate Reference-free quantitative Analysis with µ-XRF at a SEM/EDS T2 - European Conference on X-Ray Spectrometry CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-23568 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schoknecht, Ute A1 - Bornkessel, C. A1 - Fürhapper, C. A1 - Gunschera, J. A1 - Härtner, H. A1 - Hill, R. A1 - Kochan, J. A1 - Melcher, E. A1 - Wilken, U. A1 - Wittenzellner, J. A1 - Wobst, M. T1 - Bestimmung des Wirkstoffes Fenoxycarb in Holz mittels Hochdruckflüssigchromatographie N2 - Fenoxycarb ist ein insektizider Wirkstoff, der wegen seiner hormonähnlichen Wirkung in sehr geringen Konzentrationen in Holzschutzmitteln eingesetzt werden kann. Das hat zur Folge, dass aus Extrakten von behandeltem Holz relativ geringe Fenoxycarb-Mengen vor dem Hintergrund ebenfalls extrahierter Holzinhaltsstoffe zu bestimmen sind. In Vergleichsanalysen verschiedener Laboratorien wurde gezeigt, dass Fenoxycarb durch Methanol mit hoher Ausbeute aus Holz extrahierbar ist und in den Extrakten durch Hochdruckflüssigchromatographie in Kopplung mit UV-Detektion bestimmt werden kann. Fenoxycarb-Konzentrationen im unteren Bereich der erforderlichen Einbringmengen können mit dem erprobten Verfahren nur nach zusätzlicher Probenaufarbeitung bestimmt werden. Bedingt durch schwer auswertbare Chromatogramme sind die Abweichungen der Ergebnisse zwischen verschiedenen Laboratorien relativ hoch. KW - Analyse KW - Biozid KW - Fenoxycarb KW - Holz KW - Hochdruckflüssigchromatographie PY - 2010 UR - http://www.springerlink.com/content/67kjwv763p3l72g9/fulltext.pdf DO - https://doi.org/10.1007/s00107-009-0387-0 SN - 0018-3768 VL - 68 IS - 4 SP - 469 EP - 474 PB - Springer CY - Berlin ; Heidelberg AN - OPUS4-20669 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ullner, Christian A1 - Reimann, E. A1 - Kohlhoff, Harald A1 - Subaric-Leitis, Andreas T1 - Effect and measurement of the machine compliance in the macro range of instrumented indentation test N2 - The contribution concerns the strong effect of the machine compliance in the upper macro range of the instrumented indentation test on hard materials. To achieve a minimum uncertainty in determination of the machine compliance the measurement and analysis needed for the determination are studied in detail. Based on the assumption that the hardness and/or the indentation modulus are force independent, four methods on the determination of the machine compliance are described. Experimental results of a commercial testing machine up to 2500 N and of a standard machine up to 200 N are analyzed. The results show that the uncertainty of the compliance is usually higher than requested for a precisely enough determination of hardness and further materials parameters. Especially for the calibration of reference materials with high hardness and/or Young’s modulus, the machine compliance should be limited in ISO 14577 part 3, 2003 [1]. KW - Instrumented indentation test KW - Compliance KW - Uncertainty PY - 2010 DO - https://doi.org/10.1016/j.measurement.2009.09.009 SN - 0263-2241 SN - 1873-412X VL - 43 IS - 2 SP - 216 EP - 222 PB - The Institute of Measurement and Control CY - London AN - OPUS4-20671 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schendler, Thomas T1 - KAS-Merkblatt zu Biogasanlagen: Defizite bei der Auslegung, der Errichtung und dem Betrieb von Biogasanlagen T2 - Jahrestagung 2010 des Fachverbandes Biogas e. V. CY - Leipzig, Germany DA - 2010-02-02 PY - 2010 AN - OPUS4-20664 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Beke, S. A1 - Sugioka, K. A1 - Midorikawa, K. A1 - Péter, Á. A1 - Nánai, L. A1 - Bonse, Jörn T1 - Characterization of the ablation of TeO2 crystals in air with femtosecond laser pulses N2 - Femtosecond (fs) laser pulse ablation (pulse duration of 150 fs, wavelength of 775 nm, repetition rate of 1 kHz) of single-crystalline TeO2 surfaces was performed in air using the direct focusing technique. The lateral and vertical dimensions of laser ablated craters as well as the laser damage thresholds were evaluated for different pulse numbers applied to the same spot. The joint observation using optical microscopy, atomic force microscopy and scanning electron microscopy revealed the surface morphology of the ablated craters and also showed that the ablation threshold depends significantly on the number of laser pulses applied to the same spot due to incubation effects. The incubation effects change the absorption processes involved in fs-laser ablation of the transparent material from multiphoton absorption to a single-photon absorption. These results are discussed on the basis of recent models of the interaction of fs-laser pulses with dielectrics. KW - Femtosecond laser ablation KW - Damage threshold KW - TeO2 KW - Dielectrics PY - 2010 DO - https://doi.org/10.1088/0022-3727/43/2/025401 SN - 0022-3727 SN - 1361-6463 VL - 43 IS - 2 SP - 025401-1 - 025401-6 PB - IOP Publ. CY - Bristol AN - OPUS4-20665 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaunich, Matthias A1 - Stark, Wolfgang A1 - Wolff, Dietmar T1 - Tieftemperaturverhalten von Elastomerdichtungen T2 - Jahrestagung Kerntechnik CY - Berlin, Germany DA - 2010-05-04 PY - 2010 AN - OPUS4-20684 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Theiler, Geraldine A1 - Gradt, Thomas T1 - MoS2 filled PEEK composite as a self lubricating material for aerospace applications T2 - 40th Aerospace Mechanisms Symposium CY - Cocoa Beach, FL, USA DA - 2010-05-12 PY - 2010 AN - OPUS4-20752 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmalenberger, A. A1 - Noll, Matthias T1 - Shifts in desulfonating bacterial communities along a soil chronosequence in the forefield of a receding glacier N2 - Forefields of receding glaciers are unique and sensitive environments representing natural soil chronosequences, where sulfate availability is assumed to be a limiting factor. Bacterial mineralization of organosulfur is an important sulfate-providing process in soils. We analyzed the diversity of sulfonate-desulfurizing (desulfonating) bacteria in the Damma glacier forefield on the basis of the key gene asfA by terminal restriction fragment length polymorphism and clone libraries. The community structure and sequence diversity of desulfonating bacteria differed significantly between forefield soils deglaciated in the 1990s and the 1950s. Soil age had a strong effect on the desulfonating rhizosphere communities of Agrostis rupestris, but only a slight impact on the ones from Leucanthemopsis alpina. AsfA affiliated to Polaromonas sp. was predominantly found in the more recent ice-free soils and the corresponding rhizospheres of A. rupestris, while a group of unidentified sequences was found to be dominating the matured soils and the corresponding rhizospheres of A. rupestris. The desulfonating bacterial diversity was not affected by varying levels of sulfate concentrations. The level of asfA diversity in recently deglaciated soils suggests that desulfonating bacteria are a critical factor in sulfur cycling, with defined groups dominating at different stages of soil formation. KW - AsfA KW - Sulfonate desulfurization KW - T-RFLP KW - Soil chronosequence KW - Agrostis rupestris KW - Leucanthemopsis alpina PY - 2010 DO - https://doi.org/10.1111/j.1574-6941.2009.00799.x SN - 0168-6496 SN - 1574-6941 VL - 71 IS - 2 SP - 208 EP - 217 PB - Blackwell Publishing CY - Oxford AN - OPUS4-20753 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bender, S. A1 - Göllner, J. A1 - Heyn, Andreas A1 - Heilmaier, M. A1 - Schmidt, J. ED - Kainer, K.U. T1 - Basic examinations of pre-treatment and coating of magnesium alloys T2 - 8th International conference on magnesium alloys and their applications CY - Weimar, Germany DA - 2009-10-26 KW - Magnesium KW - Korrosion KW - Beschichtung KW - Vorbehandlung KW - Elektrochemisches Rauschen PY - 2010 SN - 978-3-527-32732-4 SP - 1323 EP - 1330 PB - Wiley-VCH AN - OPUS4-20743 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Graf, Nora A1 - Lippitz, Andreas A1 - Gross, Thomas A1 - Pippig, F. A1 - Holländer, A. A1 - Unger, Wolfgang T1 - Determination of accessible amino groups on surfaces by chemical derivatization with 3,5-bis(trifluoromethyl)phenyl isothiocyanate and XPS/NEXAFS analysis N2 - The determination of amino groups on surfaces capable of binding biomolecules is important for the understanding and optimization of technologically relevant coupling processes. In this study, three different types of amino-functionalized model surfaces, amino thiolate on Au, amino siloxane on Si, and polyethylene (PE) foils and films reacted with 1,2-diaminoethane (DAE) were derivatized with 3,5-bis(trifluoromethyl)phenyl isothiocyanate. Subsequently, these samples were analyzed by chemical derivatization X-ray photoelectron spectroscopy (CD-XPS) and near-edge X-ray absorption fine structure spectroscopy (NEXAFS). The determination of amino groups by this analytical approach allows gaining insight into the availability of groups on surfaces that can actually serve as attachment sites for biomolecules in technical applications. In the case of the amino thiolate on Au, almost 90% of the expected amino groups were detected by CD-XPS. Investigation of the amino siloxane films revealed lower yields for the derivatization reaction in the order of 30%. The lowered reaction yields are thought to be due to interactions between the amino siloxane`s amino and silanol groups or the underlying substrate, making them inaccessible to the derivatization agent. The aminated PE samples are characterized by a complex surface chemistry and structure, and reaction yields of the derivatization reaction cannot be unequivocally derived. However, 1-3% of the total carbon atoms in the surface layer were found to be bound to amino groups accessible to the derivatization agent. It can be concluded that, depending on the detailed character of the investigated amino-terminated surface, the amount of amino groups accessible to CD-XPS can be substantially lower than the total amount of amino groups present at the surface. KW - XPS/ESCA KW - NEXAFS/XANES KW - CD-XPS KW - Amino-functionalized surfaces KW - SAM PY - 2010 DO - https://doi.org/10.1007/s00216-009-3233-7 SN - 1618-2642 SN - 1618-2650 VL - 396 IS - 2 SP - 725 EP - 738 PB - Springer CY - Berlin AN - OPUS4-20744 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Plarre, Rüdiger T1 - An attempt to reconstruct the natural and cultural history of the granary weevil, Sitophilus granarius (Coleoptera: Curculionidae) KW - Curculionidae KW - Sitophilus KW - Evolution KW - Phylogeny KW - Adaptation KW - Archaeology KW - History PY - 2010 SN - 1210-5759 VL - 107 SP - 1 EP - 11 CY - Ceské Budejovice, Czech Republic AN - OPUS4-20792 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Babu, S. S. A1 - Sonnenberg, G. A1 - Schwenk, Christopher A1 - Goldak, J. A1 - Porzner, H. A1 - Khurana, S.P. A1 - Zhang, W. A1 - Gayler, J. T1 - How can computational weld mechanics help industry? KW - Schweißen KW - Simulation KW - Temperatur KW - Verzug KW - Eigenspannungen PY - 2010 SN - 0043-2296 SN - 0096-7629 VL - 89 IS - 1 SP - 40 EP - 45 PB - American Welding Society CY - New York, NY AN - OPUS4-20793 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Isecke, Bernd T1 - Wirtschaftliche Aspekte des Korrosionsschutzes T2 - Metallkorrosion - eine vermeidbare Materialzerstörung CY - Regensburg, Germany DA - 2010-04-19 PY - 2010 AN - OPUS4-20718 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nooke, Alida A1 - Beck, Uwe A1 - Hertwig, Andreas A1 - Krüger, Hannes A1 - Weise, Matthias A1 - Krause, Andreas A1 - Lohse, Volkmar T1 - Surface Plasmon Enhanced Total Internal Reflection Ellipsometry for Detecting and Monitoring of Hazardous Gases T2 - 5th International Conference on Spectroscopic Ellipsometry CY - Albany, NY, USA DA - 2010-05-23 PY - 2010 AN - OPUS4-20719 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kromm, Arne A1 - Kannengießer, Thomas A1 - Gibmeier, J. T1 - In-situ observation of phase transformations during welding of low transformation temperature filler material KW - LTT filler material KW - In-situ observation KW - Energy dispersive diffraction KW - Transformation temperature KW - Residual stress PY - 2010 DO - https://doi.org/10.4028/www.scientific.net/MSF.638-642.3769 SN - 0255-5476 VL - 638-642 SP - 3769 EP - 3774 PB - Trans Tech Publications CY - Aedermannsdorf, Switzerland AN - OPUS4-20725 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bonse, Jörn T1 - Structural morphological and dynamical aspects of fs-laser induced modification of crystalline silicon T2 - Eingeladener Vortrag im Seminar des Bereichs A des Max-Born-instituts, Adlershof CY - Berlin, Germany DA - 2010-01-12 PY - 2010 AN - OPUS4-20759 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe A1 - Stephanowitz, Ralph A1 - Hertwig, Andreas A1 - Schneider, Stefan A1 - Weise, Matthias A1 - Hönig, D. A1 - Domnick, R. A1 - Belzner, M. T1 - Identification and Authentication Testing of Native Surface Features and Artificial Layer Modifications by means of Imaging Ellipsometry T2 - 5th International Conference on Spectroscopic Ellipsometry (ICSE V) CY - Albany, NY, USA DA - 2010-05-23 PY - 2010 AN - OPUS4-20760 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pretsch, Thorsten T1 - Triple-shape properties of a thermoresponsive poly(ester urethane) KW - Triple-shape polymer KW - Active polymer KW - Poly(ester urethane) KW - Thermo-mechanical properties KW - Stimuli-sensitive polymer KW - Shape memory polymer PY - 2010 DO - https://doi.org/10.1088/0964-1726/19/1/015006 SN - 0964-1726 SN - 1361-665X VL - 19 SP - 015006-1 - 015006-7 PB - Institute of Physics Publ. CY - Bristol AN - OPUS4-20761 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Jechow, Mirko A1 - Fratzscher, Daniel A1 - Hasenstab, Andreas A1 - Zscherpel, Uwe A1 - Bücherl, T. T1 - Neutronentomographie von Holzteilen T2 - Deutsche Tagung für Forschung mit Sychrotronstrahlung, Neutronen und Ionenstrahlen an Großgeräten (SNI 2010) CY - Berlin, Germany DA - 2010-02-24 PY - 2010 AN - OPUS4-20762 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Zscherpel, Uwe A1 - Jechow, Mirko A1 - Fratzscher, Daniel A1 - Wrobel, Norma A1 - Ewert, Uwe T1 - X-ray backscatter imaging with a novel twisted collimator T2 - 10th European Conference on NDT (ECNDT) 2010 CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-20763 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Bücherl, T. A1 - Jechow, Mirko A1 - Fratzscher, Daniel A1 - Wrobel, Norma A1 - Tannert, T. A1 - Hasenstab, Andreas A1 - Zscherpel, Uwe A1 - Ewert, Uwe T1 - Radiological examination of wood with neutrons, different perspectives T2 - 10th European Conference on NDT (ECNDT) 2010 CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-20764 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Ewert, Uwe A1 - Krstelj, V. T1 - EFNDT Working Group 5: Public Security and Safety NDT Technologies T2 - 10th European Conference on NDT (ECNDT) 2010 CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-20765 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jung, S. A1 - Renz, F. A1 - Menzel, Michael A1 - Stößer, R. T1 - Bridging units tune the molecular switching behavior T2 - 3rd Symposium on Phase Transition and Dynamical Properties of Spin Transition Materials (PDSTM 2010), University of Tsukuba CY - Tsukuba, Japan DA - 2010-02-06 PY - 2010 AN - OPUS4-20778 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Otremba, Frank T1 - Degradation of material properties significant for lifetime extension of nuclear power plants N2 - The discussion about the right energy sources or alternative energy generation goes around the world, mostly in connection with green-house gas reduction. Therefore, some countries have started to consider extending operation of nuclear power plants. This demands an extensive plant life management as well as the knowledge of the degradation in material properties. The Basis Safety Concept (BSC) in Germany observed this circumstance. Still, lifetime extension is not an issue in Germany due to phase out of nuclear energy. Part of the BSC is the application of non-destructive examination (NDE) methods from the beginning, i.e. from component manufacture, to the end of life. The application of a NDE method to detect and size defects in components in nuclear power plants is presented. Some material properties and their degradation during increase of operation time are also in the focus of this paper. KW - Plant life management KW - Material properties KW - Ageing effects KW - Lifetime extension KW - Leak before break behaviour KW - German safety basis concept KW - Nondestructive evaluation KW - Synthetic aperture focusing technique PY - 2010 SN - 0025-5300 VL - 52 IS - 1-2 SP - 11 EP - 19 PB - Hanser CY - München AN - OPUS4-20836 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jakubowski, Norbert T1 - The Role of Modern Plasma-based Spectroscopies for Development and Characterization of Reference Materials T2 - Winter Conference on Plasma Spectrochemistry CY - Fort Myers, FL, USA DA - 2010-01-04 PY - 2010 AN - OPUS4-20838 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Blanchard, Robert A1 - Arndt, Detlef A1 - Grätz, Rainer A1 - Poli, Marco A1 - Scheider, Swen T1 - Explosions in closed pipes containing baffles and 90 degree bends N2 - There is a general lack of information on the effects of full-bore obstacles on combustion in the literature, these obstacles are prevalent in many applications and knowledge of their effects on phenomena including burning rate, flame acceleration and DDT is important for the correct placing of explosion safety devices such as flame arresters and venting devices. In this work methane, propane, ethylene and hydrogen-air explosions were investigated in an 18 m long DN150 closed pipe with a 90 degree bend and various baffle obstacles placed at a short distance from the ignition source. After carrying out multiple experiments with the same configuration it was found that a relatively large variance existed in the measured flame speeds and overpressures, this was attributed to a stochastic element in how flames evolved and also how they caused and interacted with turbulence to produce flame acceleration. This led to several experiments being carried out for one configuration in order to obtain a meaningful average. It was shown that a 90 degree bend in a long tube had the ability to enhance flame speeds and overpressures, and shorten the run-up distance to DDT to a varying degree for a number of gases. In terms of the qualitative effects on these parameters they were comparable to baffle type obstacles with a blockage ratios of between 10 and 20%. KW - Baffle KW - Bend KW - Deflagration to detonation transition KW - Explosion enhancement PY - 2010 DO - https://doi.org/10.1016/j.jlp.2009.09.004 SN - 0950-4230 SN - 1873-3352 VL - 23 SP - 253 EP - 259 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-20843 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lohse, Volkmar A1 - Negendank, Detlef T1 - Gesetzliche und berufsgenossenschaftliche Regelungen in der Gaswarntechnik T2 - Vortrag und Seminar für Honeywell Analytics CY - Berlin, Germany DA - 2010-02-16 PY - 2010 AN - OPUS4-20844 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lange, Thorid A1 - Baier, Jennifa A1 - Sahre, Mario A1 - Beck, Uwe T1 - Characterisation of zinc coatings for the application-oriented simulation of electroplating processes T2 - NanoCoatings 2010 CY - Dresden, Germany DA - 2010-03-28 PY - 2010 AN - OPUS4-20845 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dmitriev, Andrey A1 - Österle, Werner T1 - Modeling of brake pad-disc interface with emphasis to dynamics and deformation of structures N2 - The frictional behavior at local contacts in an automotive brake system was analysed on the basis of computer simulation by movable cellular automata method. The boundary conditions of the model were adjusted to experimental observations obtained by TEM. The model proved to be adequate for simulating mechanical mixing and velocity accommodation at the pad-disc interface. Dynamics of particle interaction were visualized by showing rotation angles and velocity vectors. The model provided information on the development of plastic deformation for metal-on-metal contacts and on crack formation at graphite lamellae of cast iron disc. Results are in agreement with conventional friction theories. KW - Nanotribology KW - Pad-disc interface KW - Simulation KW - Mechanically mixed layer PY - 2010 DO - https://doi.org/10.1016/j.triboint.2009.10.012 SN - 0301-679X VL - 43 IS - 4 SP - 719 EP - 727 PB - Butterworth-Heinemann CY - Oxford AN - OPUS4-20876 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mantouvalou, I. A1 - Lange, K. A1 - Wolff, Timo A1 - Grötzsch, D. A1 - Lühl, Lars A1 - Haschke, M. A1 - Hahn, Oliver A1 - Kanngießer, B. T1 - A compact 3D micro X-ray fluorescence spectrometer with X-ray tube excitation for archaeometric applications N2 - In this work, the applicability of a new 3D micro X-ray fluorescence (3D Micro-XRF) laboratory spectrometer for the investigation of historical glass objects is demonstrated. The non-destructiveness of the technique and the possibility to measure three-dimensionally resolved fluorescence renders this technique into a suitable tool for the analysis of cultural heritage objects. Although absorption and resolution effects complicate qualitative analysis of the data, layered structures can be distinguished from homogeneous samples without the need for full quantification. Different manufacturing techniques were studied in this work with the help of hand-made reference samples. With the gained knowledge it could be shown for the investigated historical glass object, that black enamel as a stained glass contour colour was used in a cold painting. The object was not fired after the application of the black enamel, but instead the adhesion of the paint was solely provided through organic binding agents and the backing with metal foils. Thus, for the manufacturing of the object, a mixture of cold painting technique with a stained glass color was used. Quantitative measurements with a 3D Micro-XRF setup at the Berlin synchrotron BESSY II confirm the assumptions drawn on the basis of the qualitative investigation with the 3D Micro-XRF spectrometer with X-ray tube excitation. KW - 3D micro XRF KW - Archaeometry KW - Non-destructive testing KW - Cultural heritage PY - 2010 DO - https://doi.org/10.1039/b915912f SN - 0267-9477 SN - 1364-5544 VL - 25 SP - 554 EP - 561 PB - Royal Society of Chemistry CY - London AN - OPUS4-20878 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Droste, Bernhard T1 - Eine Fallstudie KW - Transport radioaktiver Stoffe KW - Gefahrgutrechtliche Bauartprüfung KW - Fallversuche KW - Finite-Elemente-Berechnungen PY - 2010 SN - 0944-6117 IS - 02 SP - 26 EP - 28 PB - Vogel CY - München AN - OPUS4-20879 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sarmiento Klapper, Helmuth A1 - Goellner, J. A1 - Heyn, Andreas T1 - The influence of the cathodic process on the interpretation of electrochemical noise signals arising from pitting corrosion of stainless steels N2 - The use of electrochemical noise (EN) measurements for the investigation and monitoring of corrosion has allowed many interesting advances in the corrosion science in recent years. A special advantage of EN measurements includes the possibility to detect and study the early stages of localized corrosion. Nevertheless, the understanding of the electrochemical information included in the EN signal is actually very limited. The role of the cathodic process on the EN signals remains uncertain and has not been sufficiently investigated to date. Thus, an accurate understanding of the influence of the cathodic process on the EN signal is still lacking. On the basis of different kinetics of the oxygen reduction it was established that the anodic amplitude of transients arising from pitting corrosion on stainless steel can be decreased by the corresponding electron consumption of the cathodic process. Therefore, the stronger the electron consumption, the weaker the anodic amplitude of the EN signal becomes. EN signals arising from pitting corrosion on stainless steel can be measured because the cathodic process is inhibited by the passive layer. This was confirmed by means of EN measurements under cathodic polarisation. Since the cathodic process plays a decisive role on the form of transients arising from pitting corrosion, its influence must be considered in the evaluation and interpretation of the EN signals. KW - A. stainless steel KW - B. electrochemical noise KW - C. Pitting corrosion KW - C. Oxygen reduction PY - 2010 DO - https://doi.org/10.1016/j.corsci.2009.12.021 SN - 0010-938X VL - 52 IS - 4 SP - 1362 EP - 1372 PB - Elsevier CY - Orlando, Fla. AN - OPUS4-20880 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Desai, M.S. A1 - Strassert, J.F.H. A1 - Meuser, K. A1 - Hertel, Horst A1 - Ikeda-Ohtsubo, W. A1 - Radek, R. A1 - Brune, A. T1 - Strict cospeciation of devescovinid flagellates and Bacteroidales ectosymbionts in the gut of dry-wood termites (Kalotermitidae) N2 - The surface of many termite gut flagellates is colonized with a dense layer of bacteria, yet little is known about the evolutionary relationships of such ectosymbionts and their hosts. Here we investigated the molecular phylogenies of devescovinid flagellates (Devescovina spp.) and their symbionts from a wide range of dry-wood termites (Kalotermitidae). From species-pure flagellate suspensions isolated with micropipettes, we obtained SSU rRNA gene sequences of symbionts and host. Phylogenetic analysis showed that the Devescovina spp. present in many species of Kalotermitidae form a monophyletic group, which includes also the unique devescovinid flagellate Caduceia versatilis. All members of this group were consistently associated with a distinct lineage of Bacteroidales, whose location on the cell surface was confirmed by fluorescence in situ hybridization. The well-supported congruence of the phylogenies of devescovinids and their ectosymbionts documents a strict cospeciation. In contrast, the endosymbionts of the same flagellates (´Endomicrobia´) were clearly polyphyletic and must have been acquired independently by horizontal transfer from other flagellate lineages. Also the Bacteroidales ectosymbionts of Oxymonas flagellates present in several Kalotermitidae belonged to several distantly related lines of descent, underscoring the general perception that the evolutionary history of flagellate-bacteria symbioses in the termite gut is complex. KW - Symbionts KW - Termite gut KW - Flagellates KW - Cospeciation KW - Bacteroidales KW - Devescovinids KW - Kalotermitidae KW - Dry-wood termites PY - 2010 DO - https://doi.org/10.1111/j.1462-2920.2009.02080.x SN - 1462-2912 SN - 1462-2920 VL - 12 IS - 8 SP - 2120 EP - 2132 PB - Blackwell Science CY - Oxford AN - OPUS4-20885 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Philipp, Rosemarie A1 - Schantz, M. A1 - Urquiza, M.P. A1 - Calderón, M.A.A. A1 - Torres, M.M. A1 - Carter, D. A1 - O'Connor, G. A1 - Sejeroe-Olsen, B. A1 - Ricci, M. A1 - Lalere, B. A1 - Peignaux, M. A1 - Kim, D.-H. A1 - Itoh, N. A1 - Wong, S.-K. A1 - Man, T.O. A1 - Caixeiro, J.M.R. T1 - CCQM-K50: Polycyclic aromatic hydrocarbons (PAHs) in soil/particulate matter PY - 2010 DO - https://doi.org/10.1088/0026-1394/47/1A/08006 SN - 0026-1394 SN - 1681-7575 VL - 47 SP - 08006-1 - 08006-47 PB - Inst. of Physics Publ. CY - Bristol AN - OPUS4-20821 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Baer, Wolfram A1 - Bösel, Dieter A1 - Eberle, Arno A1 - Klingbeil, Dietmar T1 - Determination of dynamic crack resistance of ductile cast iron using the compliance ratio key curve method KW - Dynamic crack resistance curve KW - Ductile cast iron KW - Single-specimen method KW - Key curve KW - Compliance ratio method PY - 2010 DO - https://doi.org/10.1016/j.engfracmech.2009.06.015 SN - 0013-7944 SN - 1873-7315 VL - 77 SP - 374 EP - 384 PB - Elsevier Science CY - Kidlington AN - OPUS4-20822 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Ulrich T1 - Druckentlastung von Gasexplosionen - Möglichkeiten und Grenzen von Berechnungsmethoden T2 - 8. FSE-Brandschutzfachtagung CY - Sankt Pölten, Austria DA - 2010-02-08 PY - 2010 AN - OPUS4-20823 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grätz, Rainer T1 - Konformitätsbewertung mechanischer Ex-Betriebsmittel T2 - 35. Heilbronner Ex-Schutz-Seminar "Planen, Errichten und Betreiben von Anlagen in explosionsgefährdeten Betriebsstätten" CY - Heilbronn, Germany DA - 2010-02-24 PY - 2010 AN - OPUS4-20824 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schalau, Bernd T1 - Störfallauswirkungsbetrachtungen T2 - Fortbildungsveranstaltung des Landesumweltamtes Brandenburg "Bewertung von Störfallauswirkungsbetrachtungen" CY - Potsdam, Germany DA - 2010-01-21 PY - 2010 AN - OPUS4-20825 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kemnitz, E. A1 - Krüger, Hannes A1 - Beck, Uwe A1 - Hertwig, Andreas T1 - Nano metal fluorides: Small size but great properties T2 - Inorganic Fluorides for Chemistry and Environment, Optics and Electronics CY - Bordeaux, France DA - 2010-04-14 PY - 2010 AN - OPUS4-20868 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hertwig, Andreas A1 - Weise, Matthias A1 - Beck, Uwe A1 - Rybachuk, M. T1 - Optical vs. mivroscopic properties of ECR and RF bias generated amoephous hydrogenated carbon films T2 - PSE CY - Garmisch-Partenkirchen, Germany DA - 2010-09-13 PY - 2010 AN - OPUS4-20869 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe A1 - Reiners, Georg A1 - Weise, Matthias A1 - Lerche, D. A1 - Rietz, U. A1 - Niederwald, H. T1 - Quantitative Adhesion Testing of PVD Coatings by means of Centrifuge Technology T2 - PSE CY - Garmisch-Partenkirchen, Germany DA - 2010-09-13 PY - 2010 AN - OPUS4-20870 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Taffe, Alexander A1 - Schaurich, Dieter A1 - Wilsch, Gerd T1 - Zuverlässige Bestimmung von Chloridgehalten bei der Instandsetzung tausalzgeschädigter Bauwerke T2 - 4. Kolloquium Verkehrsbauten CY - Ostfildern, Germany DA - 2010-02-02 PY - 2010 AN - OPUS4-20871 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Habib, Abdel Karim A1 - Schalau, Bernd A1 - Zeps, Robert A1 - Frank, S. T1 - Vergleich von Modellen zur Simulation einer Lachenverdunstung N2 - Betreiber, deren Betriebsbereiche den erweiterten Pflichten der Störfall-Verordnung unterliegen, müssen einen Sicherheitsbericht anfertigen, in dem Szenarien möglicher Störfälle beschrieben sind. Im Rahmen dieser Störfallauswirkungsbetrachtungen sind auch oftmals Szenarien zu untersuchen, bei denen Flüssigkeiten freigesetzt werden. Der Verdunstungsmassenstrom aus der Flüssigkeitslache ist der maßgebliche Eingangsparameter für die Gasausbreitungsberechnung mit der die Gefährdungsradien ermittelt werden. Für die Berechnung des Verdunstungsmassenstroms werden meist empirische Modelle eingesetzt. Anhand von experimentellen Daten aus eigenen Freilandversuchen werden die Leistungsfähigkeit sowie die Grenzen des Anwendungsbereichs diverser bekannter Modelle untersucht. KW - Verdunstung KW - Empirische Modelle KW - Experimentelle Daten PY - 2010 SN - 1434-9728 SN - 1436-4948 SN - 0372-2457 SN - 0376-1185 VL - 51 IS - 1/2 SP - 22 EP - 27 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-20873 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Taffe, Alexander A1 - Wilsch, Gerd A1 - Schaurich, Dieter ED - Gieler-Breßmer, S. T1 - Zuverlässige Bestimmung von Chloridgehalten bei der Instandsetzung tausalzgeschädigter Bauwerke T2 - 4. Kolloquium Verkehrsbauten - Schwerpunkt Parkhäuser CY - Ostfildern, Deutschland DA - 2010-02-02 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Chloridanalyse KW - Betoninstandsetzung KW - Parkhäuser KW - LIBS KW - Portables LIBS KW - Tausalz PY - 2010 SN - 3-924813-82-5 IS - Kap. 11.1 SP - 405 EP - 412 CY - Ostfildern AN - OPUS4-20874 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Burkert, Annette A1 - Fischer, Joachim T1 - Legierungsgehalt oder Oberfläche - Was bestimmt die Beständigkeit nichtrostender Stähle? T2 - 9. Tagung Korrosionsschutz in der maritimen Technik CY - Hamburg, Deutschland DA - 2010-01-27 KW - Nichtrostender Stahl KW - Werkstoffauswahl KW - Dauerhaftigkeit KW - Korrosion PY - 2010 SP - 7 EP - 18 CY - Hamburg AN - OPUS4-20875 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Wille, Frank A1 - Qiao, Linan A1 - Ballheimer, Viktor A1 - Komann, Steffen T1 - Simulation of Impact Limiter Crushing of RAM Packages under 9 m Drop Test Conditions T2 - Waste Management 2010 CY - Phoenix, AZ, USA DA - 2010-03-06 PY - 2010 AN - OPUS4-20804 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bonse, Jörn T1 - Structural and morphological modifikation of crystalline silicon induced femtosecond laser pulses T2 - internes Seminar des Fraunhofer-Instituts für Keramische Technologien und Systeme (IKTS) CY - Dresden, Germany DA - 2010-01-20 PY - 2010 AN - OPUS4-20805 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schalau, Bernd T1 - Freistrahlmodelle T2 - Fortbildungsveranstaltung des Landesumweltamtes Brandenburg "Bewertung von Störfallauswirkungsbetrachtungen" CY - Potsdam, Germany DA - 2010-01-21 PY - 2010 AN - OPUS4-20826 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schalau, Bernd T1 - Ausbreitung von störfallbedingten Freisetzungen - VDI 3783 T2 - Fortbildungsveranstaltung des Landesumweltamtes Brandenburg "Bewertung von Störfallauswirkungsbetrachtungen" CY - Potsdam, Germany DA - 2010-01-21 PY - 2010 AN - OPUS4-20827 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schalau, Bernd T1 - Gaswolkenexplosion und Lachenbrand T2 - Fortbildungsveranstaltung des Landesumweltamtes Brandenburg "Bewertung von Störfallauswirkungsbetrachtungen" CY - Potsdam, Germany DA - 2010-01-21 PY - 2010 AN - OPUS4-20828 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas T1 - Korrosionsschutz von Befestigungsmitteln durch Einsatz nichtrostender Stähle T2 - 4. Fischer-Expertenforum Befestigungstechnik CY - Waldachtal, Germany DA - 2010-01-21 PY - 2010 AN - OPUS4-20834 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Goedecke, Thomas A1 - Pötzsch, Klaus-Michael A1 - Pagenkopf, Marion T1 - Vibrations- und Stoßbelastungen an IBCs und Tankfahrzeugen N2 - Die unterschiedlichen Stoß- und Vibrationsbelastungen bei der Fahrt auf Straßen oder im freien Gelände dürften den meisten Lesern aus dem täglichen Leben bekannt sein. Je nach Ausführung und Zustand des Feder-/Dämpfungssystems eines Fahrzeuges spürt der menschliche Körper unterschiedliche Belastungen, die die Schmerzgrenze erreichen können. Diese dynamischen Belastungen werden auch auf Ladung, in unserem Fall auf die Gefahrgutumschließungen und auf das Gefahrgut, übertragen. Derartige Belastungen können durch entsprechende Stapelung und Sicherung der Ladung in ihren Auswirkungen gemindert werden. Für andere Belastungen, z. B. Stoß durch einen Auffahrunfall, sind Schutzsysteme am Heck des Fahrzeugs gefordert. Bei Tankfahrzeugen kann eine Beschädigung des Tanks durch einen solchen Auffahrschutz gemindert werden. Im vorliegenden Beitrag werden Ergebnisse von Vibrationsmessungen an Lastkraftwagen mit den Ergebnissen des Vibrationstests an einem Intermediate Bulk Container (IBC) verglichen. Berechnungen zum Auffahrschutz an Tankfahrzeugen werden Messergebnissen gegenübergestellt. KW - Gefahrgutverpackungen KW - Belastung KW - Tankfahrzeug KW - Unfallszenarien PY - 2010 DO - https://doi.org/10.3139/120.110100 SN - 0025-5300 N1 - Geburtsname von Pagenkopf, Marion: Nitsche, M. - Birth name of Pagenkopf, Marion: Nitsche, M. VL - 52 IS - 1-2 SP - 63 EP - 70 PB - Hanser CY - München AN - OPUS4-20835 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Moritz, W. A1 - Tausche, A. A1 - Werner, R. A1 - Wirth, Thomas A1 - Unger, Wolfgang A1 - Linke, S. T1 - Optimisation of chemical sensors using the Continuous Gradient - High Throughput Screening Macroscope - CG-HTSM T2 - 217th ECS Meeting CY - Vancouver, Canada DA - 2010-04-25 PY - 2010 AN - OPUS4-20846 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kromm, Arne A1 - Kannengießer, Thomas T1 - Interaction of Phase Transformation and Residual Stresses during Welding Characterized by Synchrotron Diffraction T2 - Workshop VULCAN at the SNS: Scientific Opportunities, Industrial Applications and Challenges CY - Oak Ridge, TN, USA DA - 2010-01-21 PY - 2010 AN - OPUS4-20852 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kneipp, Janina A1 - Drescher, Daniela A1 - Matschulat, Andrea T1 - Raman spectroscopy on nanoparticle-influenced cellular systems T2 - BMBF-Nachwuchsförderung in der Biotechnologie CY - Berlin, Germany DA - 2010-01-26 PY - 2010 AN - OPUS4-20853 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Frank A1 - Maier, Bärbel A1 - Meinel, Dietmar T1 - Das Verhalten der Gesteinskörnung im Beton - Charakterisierung mit der Röntgen-CT T2 - Fachtagung KIES + Sand kompakt CY - Hanover, Germany DA - 2010-01-25 PY - 2010 AN - OPUS4-20854 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dietrich, Paul A1 - Horlacher, T. A1 - Gross, Thomas A1 - Wirth, Thomas A1 - Castelli, R. A1 - Shard, A.G. A1 - Alexander, M. A1 - Seeberger, P. H. A1 - Unger, Wolfgang T1 - Optimization of the performance of carbohydrate microarrays by surface chemical analysis T2 - 12th Status Seminar "Chip Technologies, Sequencing and Functional Genomics" der DECHEMA e. V. CY - Frankfurt am Main, Germany DA - 2010-02-04 PY - 2010 AN - OPUS4-20806 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goebbels, Jürgen T1 - Beiträge der BAM zu Röntgentechniken in der Archäometrie T2 - Workshop "Potentiale, Perspektiven und Zukunftsaufgaben archäometrischer Forschung in Deutschland" CY - Berlin, Germany DA - 2010-02-17 PY - 2010 AN - OPUS4-20810 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Frank A1 - Maier, Bärbel A1 - Meinel, Dietmar T1 - Charakterisierung frostinduzierter Schädigungsprozesse mit innovativen Prüftechniken T2 - Fachkolloquium "Übertragbarkeit von Frost-Laborversuchen auf Praxisverhältnisse" CY - Berlin, Germany DA - 2010-01-21 PY - 2010 AN - OPUS4-20857 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Horn, Wolfgang A1 - Panaskova, J. A1 - Jann, Oliver A1 - Müller, B. A1 - Müller, D. A1 - Plehn, W. T1 - Labelling of building materials - A combination of emission tests with odour tests T2 - HEMICPD workshop: Building Material Emissions to indoor air Opportunities/consequences for Belgian companies CY - Brussels, Belgium DA - 2010-01-21 PY - 2010 AN - OPUS4-20858 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai A1 - Eliezer, D. A1 - Kluge, Martin T1 - Hydrogen storage in glass capillary arrays T2 - 4th Hydrogen & Energy Symposium CY - Wildhaus, Switzerland DA - 2010-01-24 PY - 2010 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. AN - OPUS4-20859 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meyer-Plath, Asmus A1 - Hanelt, Sven A1 - Illgen, René A1 - Jäger, Christian A1 - Mach, Reinhard A1 - Orts Gil, Guillermo A1 - Unger, Wolfgang T1 - Physikalisch-chemische Charakterisierung von CNT T2 - Inno. CNT Jahrestagung CY - Marl (North Rhine-Westphalia), Germany DA - 2010-01-20 PY - 2010 AN - OPUS4-20860 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Baier, Jennifa A1 - Lange, Thorid A1 - Sahre, Mario A1 - Beck, Uwe T1 - Einfluss des Elektrolyten und der Bauteilgeometrie auf die Mikrostruktur und die makroskopischen Eigenschaften der Zinkschichten T2 - ZVO Oberflächentage CY - Berlin, Germany DA - 2010-09-22 PY - 2010 AN - OPUS4-20861 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bán, A. A1 - Baier, Jennifa T1 - Modelling of the overpotential dependence on the relative grain volume for direct current and pulse plating for zinc from a commercial alkaline bath T2 - Nanocoatings 2010 CY - Dresden, Germany DA - 2010-03-28 PY - 2010 AN - OPUS4-20862 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gorbushina, Anna T1 - Life on the Rocks or Subaerial Biofilms T2 - Mikrobiologisches Kolloquium, Institut für Biologie an der Freien Universität, Fachbereich Biologie, Chemie, Pharamzie CY - Berlin, Germany DA - 2010-01-29 PY - 2010 AN - OPUS4-20864 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maskos, Michael A1 - Bantz, C. A1 - Utech, St. A1 - Noskov, Sergey A1 - Scherer, Christian T1 - Interaction of Cells with Biologically Functionalized, Multicompartment Polyorganosiloxane Nanoparticles T2 - GKSS Workshop "Structural aspects of biocompatible ferrofluids: stabilization, properties control and application" CY - Geesthacht, Germany DA - 2010-01-28 PY - 2010 AN - OPUS4-20865 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Stoppel, Markus A1 - Kurz, J.H. T1 - Bestandsaufnahme und Zustandsanalyse von Brücken und Parkhäusern mit automatisierten Verfahren T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - Zerstörungsfreie Prüfung im Bauwesen KW - ZfPBau KW - Kombination KW - OSSCAR KW - BetoScan KW - Roboterplattform KW - Bauwerkscanner PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 (Vortrag 15) SP - 1 EP - 9 CY - Berlin AN - OPUS4-20926 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Schicker, Johannes A1 - Sievert, Rainer A1 - Fedelich, Bernard A1 - Noack, Hans-Dieter A1 - Kazak, Fedor A1 - Matzak, Kathrin A1 - Kühn, Hans-Joachim A1 - Klingelhöffer, Hellmuth A1 - Skrotzki, Birgit T1 - TMF Lebensdauerberechnung ATL-Heißteile - Entwicklung von Rechenmodellen zur Lebensdauervorhersage von Werkstoffen für Abgasturbolader-Heißteile unter thermomechanischer Ermüdungsbeanspruchung und Übertragung für Anwendung auf Bauteile PY - 2010 IS - 902 SP - 1 EP - 156 CY - Frankfurt am Main AN - OPUS4-20931 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang T1 - Entwicklung der Gütesicherung bei Isolierstoffen KW - Materialprüfungsamt KW - Kunstharze KW - Bakelit KW - Phenolharz KW - Aminoharz KW - Gütesicherung KW - Technische Vereinigung PY - 2010 UR - https://www.google.de/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0ahUKEwivis-l7tvKAhVFWBoKHa-jD1gQFggeMAA&url=https%3A%2F%2Fwww.kunststoffe.de%2F_storage%2Fasset%2F538701%2Fstorage%2Fmaster%2Ffile%2F5804889%2Fdownload%2FEntwicklung%2520der%2520G%25C3%25BCtesicherung%2520bei%2520Isolierstoffen.pdf&usg=AFQjCNE14vu5Aw1foQ7OZdcTT2vwsRX_TQ SN - 0023-5563 VL - 100 IS - 2 SP - 14 EP - 17 PB - Hanser CY - München AN - OPUS4-20935 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Perret, William A1 - Schwenk, Christopher A1 - Rethmeier, Michael T1 - Comparison of analytical and numerical welding temperature field calculation N2 - Analytical and numerical methods are used to estimate the temperature field due to the heat effects of welding. Numerical techniques are more adapted for industrial complex applications where analytical solutions do not exist yet. However, computational time is much lower with analytical models and a combination of both methods is investigated. Therefore, the two approaches are introduced and confronted in this paper. The finite-element software Ansys has been used for numerical simulations and Scilab for analytical simulations. In order to get a similar result quality, both methods have to be analysed and compared with respect to boundary conditions. These configurations are presented in this paper. Before starting any analysis, the analytical and numerical models have to be comparable. For the numerical simulation, every in- or output is given in discrete form and, for the analytical simulation, in continuous form. Thus, an analysis of the energy input distribution in both models is compulsory to ensure that the same amount of energy is applied. After this first study, a comparison of the analytical and numerical temperature field simulation is done from a fix point source in an infinite volume in steady state to a moving point source in a finite dimension in a transient state. A good agreement between the analytical and the numerical simulation results is found. However, some techniques, like a consideration of an image heat source for the analytical model or the selection of boundary conditions for the numerical model, need to be taken into consideration when the degree of complexity of the study (finite dimension or cooling time) increases. The limit of the comparison is reached when the geometry becomes too complex and when the effect of variable thermal properties with temperature cannot be neglected. KW - Welding simulation KW - Temperature field KW - Analytical approach KW - Numerical approach KW - Heat conduction PY - 2010 DO - https://doi.org/10.1016/j.commatsci.2009.11.032 SN - 0927-0256 VL - 47 IS - 4 SP - 1005 EP - 1015 PB - Elsevier CY - Amsterdam AN - OPUS4-20887 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mair, Georg A1 - Duffner, Eric A1 - Lau, Markus A1 - Szczepaniak, Mariusz T1 - Verbesserung der Reproduzierbarkeit von hydraulischen Lastwechselprüfungen an Composite-Druckbehältern - Teil 2 N2 - Für eine gute Vergleichbarkeit der Ergebnisse aus verschiedenen Anlagen sollte dieTreffsicherheit der Extremdrücke nach Maßgabe einer bestimmten wirksamen Haltezeit ermittelt und bewertet werden. Hierbei können selbst bei Flaschen für 700 bar Betriebsdruck bereits Abweichungen von wenigen bar unbemerkt zu deutlichen Veränderungen der Lebensdauer-Versuchsergebnisse führen. Speziell für Prüflinge aus Verbundwerkstoff mit tragenden Schichten aus verschiedenen Fasern oder mit mittragendem Liner kommt eine besondere Abhängigkeit der Ermüdungsfestigkeit von der Temperatur und damit auch von deren Schwankung hinzu. Für die Bewertung der Temperaturregelung ist es vor allem erforderlich, die Oberflächen- und die Medientemperatur zu protokollieren und in engen Grenzen zu regeln. So wird empfohlen, insbesondere Anlagen, die zukünftig für Versuche zur Ermittlung probabilistischer Kenngrößen von Composite-Flaschen herangezogen werden, auf diese Aspekte hin besonders zu ertüchtigen und in Ringversuchen - wie dem gezeigten - auf ihre Eigenschaften (ihren spezifischen "Fingerabdruck") hin zu überprüfen. Versuchsparameter, können für derartige Versuche folgende Empfehlungen gegeben werden: 1. Der Druckbereich sollte auf den größten und auch kleinsten Maximaldruck, der von den Anlagen in Prüfungen abgefordert werden soll, ausgerichtet sein. 2. Der Prüfling sollte so gewählt sein, dass während des Ringversuchs möglichst nicht ausgetauscht werden muss. Hierbei darf er nicht zu klein oder zu steif sein, damit die Anlage bezüglich des Hub- oder Fördervolumens auch repräsentativ für die Prüfaufgaben gefordert wird. 3. Das beschriebene Prüfprogramm mit wanderndem Prüfling und Messequipment hat sich im Grundsatz genauso bewährt wie die zentrale Auswertung der Daten. 4. Es ist nicht einfach, ein harmonisiertes Verständnis über die konkreten Aspekte des Prüfprogramms zu erreichen, entsprechend sollte sowohl das Personal im Vorfeld gut über Hintergründe und Zielsetzung informiert sein als auch die Durchführung von Ringversuchen durch sehr erfahrenes, das Prüfequipment permanent begleitendes Personal betreut werden. Jeder der Partner hat aus diesem Ringversuch viel Erfahrung und Wissen für sich mitnehmen können, sodass ein wesentlicher Vorteil derartiger Versuche im Erfahrungsgewinn aller Beteiligten zu sehen ist. Gegebenenfalls sollten derartige Ringversuche mittelfristig auch fester Bestandteil der Audits und Reaudits zur Akkreditierung bzw. Anerkennung als technischer Dienst, insbesondere für die 700-bar-Wasserstofftechnik, werden. Im Hinblick auf den Inhalt der Ringversuche und die Relevanz der diskutierten KW - Ringversuch KW - Betriebssicherheit KW - Lastwechselversuche KW - Reproduzierbarkeit KW - Temperatur KW - Druckextrema KW - Kühlstrecke KW - Medienkühlung PY - 2010 SN - 1434-9728 SN - 1436-4948 SN - 0372-2457 SN - 0376-1185 VL - 51 IS - 1/2 SP - 33 EP - 36 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-20888 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schendler, Thomas T1 - Merkblatt der KAS: Sicherheit in Biogasanlagen (KAS-12) T2 - Tagung "Alltägliche" Schäden und Mängel an Biogasanlagen CY - Hanover, Germany DA - 2010-03-17 PY - 2010 AN - OPUS4-20890 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mann, Guido A1 - Jurke, Mathias A1 - Zoheidi, M. A1 - Eberstein, M. A1 - Krüger, Jörg T1 - Influence of core diameter and coating material on nanosecond laser-induced damage threshold of optical multicode fibers T2 - 10. Konferenz der ESG und 84. Glastechnische Tagung CY - Magdeburg, Germany DA - 2010-05-30 PY - 2010 AN - OPUS4-20891 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hübert, Thomas A1 - Unger, Brita A1 - Bücker, Michael T1 - Sol-gel derived TiO2 wood composites N2 - The sol–gel process was applied to enhance properties of pine sapwood. For this purpose wood prisms were soaked in nanoscaled precursor solutions prepared from titanium(IV) n-butoxide and titanium(IV) iso-propoxide, respectively, using vacuum impregnation technique. The wet composites were cured by special program with final heat treatment at 103 °C. Weight percent gains (WPG) of the wood specimen in the range of 19-25% were obtained due to these procedures. SEM investigations show that precursor solutions penetrate into the whole wood body and the titania formed after heat treatment in the composites is deposited in the pores (lumen) and partly in the cell walls of the wooden matrix. The moisture sorption was investigated in long term tests for a period of some months by storage at 20-23 °C in humid air (relative humidity of 99%) and ambient atmosphere (relative humidity 40-60%), respectively. For untreated reference samples the moisture sorption results in increasing of mass and volume according to saturation values of 24 and 13%, respectively, after about 15 days. The incorporation of titania reduces the saturation values of the moisture sorption by up to 12% in mass and by up to 5% in volume at a relative humidity of 99%. Thus, an enhancement of the dimensional stability of about 60% is obtained at best. The results demonstrate that modification of wood with sol-gel derived precursors can enhance its dimensional stability, which prevents the formation of cracks. Because of that reduced moisture sorption biological attacks should be delimited. Additionally, thermal analyses show a retarded combustion of the wood matrix due to titania infiltration. KW - Titania KW - Sol-gel KW - Nanocomposites KW - Wood protection KW - Water sorption PY - 2010 DO - https://doi.org/10.1007/s10971-009-2107-y SN - 0928-0707 SN - 1573-4846 VL - 53 IS - 2 SP - 384 EP - 389 PB - Kluwer Academic Publ. CY - Dordrecht AN - OPUS4-20892 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Verfleckungen an Edelstählen T2 - 25 Jahre Gewerbeakademie, Praktikernachmittag "Edelstahl Rostfrei" CY - Freiburg, Germany DA - 2010-02-26 PY - 2010 AN - OPUS4-20893 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas T1 - Bauaufsichtliche Zulassung von nichtrostenden Stählen T2 - 25 Jahre Gewerbeakademie, Praktikernachmittag "Edelstahl Rostfrei" CY - Freiburg, Germany DA - 2010-02-26 PY - 2010 AN - OPUS4-20894 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Verfleckungen auf der Oberfläche von nichtrostenden Stählen - eine aktuelle Herausforderung T2 - 28. Gemeinschaftsveranstaltung SLV Hannover / TÜV Nord AG CY - Hanover, Germany DA - 2010-03-09 PY - 2010 AN - OPUS4-20895 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang T1 - Development of quality assurance for insulating materials PY - 2010 UR - https://www.google.de/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0ahUKEwjyyejZ7tvKAhXBVxoKHeV0Dr4QFgghMAA&url=https%3A%2F%2Fwww.kunststoffe.de%2Fen%2F_storage%2Fasset%2F590842%2Fstorage%2Fmaster%2Ffile%2F6128237%2Fdownload%2FDevelopment%2520of%2520Quality%2520Assurance%2520for%2520Insulating%2520Materials.pdf&usg=AFQjCNGMbKTaYDrHEdGuZ2IB_7zQCrTVkw SN - 1862-4243 VL - 100 IS - 2 SP - 6 EP - 9 PB - Hanser CY - München AN - OPUS4-20936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Aguiar, J. B. ED - Jalali, S. ED - Camoes, A. ED - Ferreira, R.M. T1 - MODINSYS modular systems for the protection and repair of concrete structures T2 - 13th International Congress on polymers in concrete - ICPIC 2010 CY - Funchal-Madeira, Portugal DA - 2010-02-11 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - SPCC KW - PCC KW - Repair mortar KW - Modular systems KW - Concrete rehabilitation PY - 2010 SN - 978-972-99179-4-3 SP - 697 EP - 704 CY - Funchal-Madeira, Portugal AN - OPUS4-20937 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Aichmayer, B. A1 - Wiedemann-Bidlack, F. B. A1 - Gilow, C. A1 - Simmer, J.P. A1 - Yamakoshi, Y. A1 - Emmerling, Franziska A1 - Margolis, H.C. A1 - Fratzl, P. T1 - Amelogenin nanoparticles in suspension: Deviations from spherical shape and pH-dependent aggregation N2 - It is well-known that amelogenin self-assembles to form nanoparticles, usually referred to as amelogenin nanospheres, despite the fact that not much is known about their actual shape in solution. In the current paper, we combine SAXS and DLS to study the three-dimensional shape of the recombinant amelogenins rP172 and rM179. Our results show for the first time that amelogenins build oblate nanoparticles in suspension using experimental approaches that do not require the proteins to be in contact with a support material surface. The SAXS studies give evidence for the existence of isolated amelogenin nano-oblates with aspect ratios in the range of 0.45-0.5 at pH values higher than pH 7.2 and show an aggregation of these nano-oblates at lower pH values. The role of the observed oblate shape in the formation of chain-like structures at physiological conditions is discussed as a key factor in the biomineralization of dental enamel. KW - Enamel KW - Recombinant amelogenin KW - rP172 KW - rM179 KW - Self-assembly KW - SAXS KW - DLS KW - Shape KW - Nanospheres KW - Oblates KW - pH dependency PY - 2010 DO - https://doi.org/10.1021/bm900983b SN - 1525-7797 VL - 11 IS - 2 SP - 369 EP - 376 PB - ACS Publ. CY - Washington, DC, USA AN - OPUS4-20939 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Shokouhi, Parisa A1 - Zoëga, Andreas A1 - Wiggenhauser, Herbert A1 - Fischer, G. T1 - Macro-effect of microcracks on sonic surface wave velocity in concrete under compression T2 - 89th TRB Annual Meeting CY - Washington, D.C., USA DA - 2010-01-10 KW - NDT KW - Microcracking KW - Sonic wave velocity KW - Concrete KW - Load KW - Stress PY - 2010 SP - 1 EP - 17 AN - OPUS4-20942 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Matthias A1 - Köppen, Robert A1 - Rasenko, Tatjana A1 - Klein-Hartwig, Karin A1 - Bremser, Wolfram A1 - Nehls, Irene T1 - Fusarium mycotoxins in food - Development of new reference materials T2 - ANALYTICA CY - Munich, Germany DA - 2010-03-23 PY - 2010 AN - OPUS4-20943 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühn, Andreas A1 - Höhse, Marek A1 - Ostermann, Markus T1 - Neue Wege in der Analytik oberflächenmodifizierter Stähle T2 - 4. Interdiszipinäres Doktorandenseminar Analytik CY - Attendorn, Germany DA - 2010-02-21 PY - 2010 AN - OPUS4-20944 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Paul, Andrea T1 - Multivariate Verfahren zur Auswertung von (NIR-) Spektren T2 - Abteilungskolloquium, Institut für Physik, AG Photobiophysik, Humboldt Universität Berlin CY - Berlin, Germany DA - 2010-02-15 PY - 2010 AN - OPUS4-20945 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wang, Y.-W. A1 - Descalzo López, Ana Belén A1 - Shen, Z. A1 - You, X.-Z. A1 - Rurack, Knut T1 - Dihydronaphthalene-fused Boron-dipyrromethene (BODIPY) dyes: insight into the electronic and conformational tuning modes of BODIPY fluorophores N2 - A new series of boron-dipyrromethene (BDP, BODIPY) dyes with dihydronaphthalene units fused to the β-pyrrole positions (1 a-d, 2) has been synthesised and spectroscopically investigated. All the dyes, except pH-responsive 1 d in polar solvents, display intense emission between 550-700 nm. Compounds 1 a and 1 b with a hydrogen atom and a methyl group in the meso position of the BODIPY core show spectroscopic properties that are similar to those of rhodamine 101, thus rendering them potent alternatives to the positively charged rhodamine dyes as stains and labels for less polar environments or for the dyeing of latex beads. Compound 1 d, which carries an electron-donating 4-(dimethylamino)phenyl group in the meso position, shows dual fluorescence in solvents more polar than dibutyl ether and can act as a pH-responsive "light-up" probe for acidic pH. Correlation of the pKa data of 1 d and several other meso-(4-dimethylanilino)-substituted BODIPY derivatives allowed us to draw conclusions on the influence of steric crowding at the meso position on the acidity of the aniline nitrogen atom. Preparation and investigation of 2, which carries a nitrogen instead of a carbon as the meso-bridgehead atom, suggests that the rules of colour tuning of BODIPYs as established so far have to be reassessed; for all the reported couples of meso-C- and meso-N-substituted BODIPYs, the exchange leads to pronounced redshifts of the spectra and reduced fluorescence quantum yields. For 2, when compared with 1 a, the opposite is found: negligible spectral shifts and enhanced fluorescence. Additional X-ray crystallographic analysis of 1 a and quantum chemical modelling of the title and related compounds employing density functional theory granted further insight into the features of such sterically crowded chromophores. KW - Dyes/pigments KW - Fluorescent probes KW - Photophysics KW - Protonation KW - Boron PY - 2010 DO - https://doi.org/10.1002/chem.200902527 SN - 0947-6539 SN - 1521-3765 VL - 16 IS - 9 SP - 2887 EP - 2903 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-20957 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Harwardt, Michael A1 - Tilgner, R. A1 - Alpern, P. T1 - Visualization of package induced deformation of Integrated Circuits T2 - SNI2010, Deutsche Tagung für Forschung mit Sychrotronstrahlung, Neutronen und Ionenstrahlen CY - Berlin, Germany DA - 2010-02-24 PY - 2010 AN - OPUS4-20959 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von Chrzanowski, Lars A1 - Beckmann, Jörg A1 - Ewert, Uwe A1 - Schade, U. T1 - Terahertz Time Domain Spectroscopy - Non Destructive Testing of Dangerous Liquids T2 - International Forum on Terahertz Spectroscopy and Imaging, 4th Workshop on Terahertz Technology CY - Kaiserslautern, Germany DA - 2010-03-02 PY - 2010 AN - OPUS4-20960 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kuhlich, Paul A1 - Piechotta, Christian A1 - Nehls, Irene T1 - New disinfection by-product of polycyclic musk AHTN T2 - Metabolomics and More CY - Freising, Germany DA - 2010-03-10 PY - 2010 AN - OPUS4-20961 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Poli, Marco A1 - Schröder, Volkmar A1 - Scheider, Swen T1 - Gefahren bei der Druckentlastung von Gasexplosionen durch überdimensionierte Entlastungsflächen T2 - ProcessNet Arbeitsausschuss "Sicherheitsgerechtes Auslegen von Chemieanlagen" CY - Hamburg, Germany DA - 2010-03-03 PY - 2010 AN - OPUS4-20963 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fujisawa, Kyosuke A1 - Quercetti, Thomas A1 - Nakagami, Motonori A1 - Komatsuki, Seiji A1 - Musolff, André A1 - Müller, Karsten A1 - Droste, Bernhard A1 - Juji, K. A1 - Nishio, T. T1 - Disposal Container Safety Assessment - The Comprehensive Performance Evaluation of a "YOyushindo Disposal" Waste Container by Drop Test T2 - Waste Management Symposia 2010 CY - Phoenix, AZ, USA DA - 2010-03-07 PY - 2010 AN - OPUS4-20965 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühl, Christiane T1 - Novellierung der Technischen Regel für Rohrfernleitungen (TRFL) T2 - 24. Oldenburger Rohrleitungsforum CY - Oldenburg, Germany DA - 2010-02-11 PY - 2010 AN - OPUS4-20919 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe T1 - Die BAM - Materialforschung für Sicherheit und Technik T2 - Wissenschaft trifft Handwerk, Neue Werkstoffe und Technologien für die Präzionsfertigung CY - Leipzig, Germany DA - 2010-04-21 PY - 2010 AN - OPUS4-20921 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner A1 - Wöhlecke, Andreas T1 - Die Zulassung von Geokunststoffen, Polymeren und Dichtungskontrollsystemen nach der neuen Deponieverordnung T2 - 26. Fachtagung - Die sichere Deponie CY - Würzburg DA - 2010-02-18 KW - Geokunststoffe KW - Zulassung KW - Deponieabdichtungen KW - Deponieverordnung PY - 2010 N1 - Geburtsname von Wöhlecke, Andreas: Tuchscherer, A. - Birth name of Wöhlecke, Andreas: Tuchscherer, A. IS - Kap. B SP - 1 EP - 15 CY - Würzburg AN - OPUS4-20923 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Purohit, Purv A1 - Schönhals, Andreas T1 - Dielectric investigation of nanocomposites based on Poly(methyl methacrylate) and Polyhedral oligomeric silesquioxanes. T2 - Deutsche Physikalische Gesellschaft (DPG), Spring Meeting 2010 CY - Regensburg, Germany DA - 2010-03-20 PY - 2010 AN - OPUS4-20946 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Acosta, B. G. A1 - Frunza, S. A1 - Frunza, L. A1 - Fonseca, I. M. A1 - Dionisio, M. A1 - Schönhals, Andreas T1 - Molecular mobility of nematic E7 confined to molecular sieves of different pore size T2 - CONFIT 2010 CY - Grenoble, France DA - 2010-03-03 PY - 2010 AN - OPUS4-20947 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Frunza, S. A1 - Frunza, L. A1 - Ganea, P. A1 - Beica, A. A1 - Schönhals, Andreas T1 - Dynamics of Cyanophenyl Alkylbenzoate Molecules Adsorbed onto Aerosil: Constrained Dynamic Glass Transition T2 - CONFIT 2010 CY - Grenoble, France DA - 2010-03-03 PY - 2010 AN - OPUS4-20948 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bonse, Jörn A1 - Krüger, Jörg T1 - Probing the heat affected zone by chemical modifications in femtosecond pulse laser ablation of titanium nitride films in air N2 - A new approach is presented to quantify the so-called "heat affected zone" (HAZ) during femtosecond laser pulse processing. Ablation of titanium nitride (TiN) thin films (~3 μm thickness) by multiple femtosecond laser pulses (τ=130 fs, λ=800 nm) in air environment was studied by means of two different surface analytical methods both being sensitive to chemical alterations at the surface. Scanning Auger electron microscopy was applied for a visualization of the spatial distribution of specific elements (Ti, O) within the laser-modified areas. The chemical state of the irradiated surface was revealed by complementary x-ray photoelectron spectroscopy. Both methods were used for a depth-profiling chemical analysis (tracking the elements Ti, N, O, and C) using an Ar-ion beam for surface sputtering. In a narrow laser fluence range slightly below the ablation threshold of TiN significant superficial oxidation can be observed leading to the formation of substoichiometric TiO2-x. At fluences above the ablation threshold, an increased titanium concentration is observed within the entire ablation craters. Following upon sputter removal the elemental distribution into the depth of the nonablated material, the results allow an estimation of the heat-affected zone for femtosecond laser ablation in air environment. According to our analyses, the HAZ extends up to a few hundreds of nanometers into the nonablated material. KW - Femtosecond laser ablation KW - Heat affected zone KW - Titanium nitride KW - Scanning Auger electron microscopy KW - X-ray KW - Photoelektron spectroscopy PY - 2010 UR - http://link.aip.org/link/?JAP/107/054902 DO - https://doi.org/10.1063/1.3311552 SN - 0021-8979 SN - 1089-7550 VL - 107 IS - 5 SP - 054902-1 - 054902-5 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-20949 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst A1 - Hübner, M. A1 - Amir, J. M. A1 - Müller, H. T1 - Qualitätssicherung von Pfahlwänden mit der Ultraschallmethode - eine Machbarkeitsstudie T2 - Fachtagung Bauwerksdiagnose CY - Berlin, Germany DA - 2010-02-18 PY - 2010 AN - OPUS4-20951 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert T1 - Neue Entwicklungen der zerstörungsfreien Prüfung im Bauwesen T2 - Fachtagung Bauwerksdiagnose CY - Berlin, Germany DA - 2010-02-18 PY - 2010 AN - OPUS4-20952 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert T1 - Zerstörungsfreie Prüfverfahren bzw. Zerstörungsfreie Prüfung im Bauwesen (ZfPBau) in der BAM T2 - VSVI-Seminar Woche 2010 CY - Rendsburg, Germany DA - 2010-01-28 PY - 2010 AN - OPUS4-20953 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Taffe, Alexander T1 - Möglichkeiten der zerstörungsfreien Prüfung im Bauwesen zur Schadensdiagnose und -bewertung T2 - 548. Sitzung der Arbeitsgemeinschaft Schadenverhütung Berlin-Brandenburg, Feuersozität in Berlin CY - Berlin, Germany DA - 2010-02-25 PY - 2010 AN - OPUS4-20954 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reuter, Dirk A1 - Hodoroaba, Vasile-Dan T1 - Physical Modeling of the Background of XRF Spectra T2 - Microscopy & Microanalysis CY - Portland, OR, USA DA - 2010-08-01 PY - 2010 AN - OPUS4-20906 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rackwitz, Vanessa A1 - Procop, Mathias A1 - Hodoroaba, Vasile-Dan T1 - Characterization of Polycapillary X-Ray Semilenses with SEM/EDX T2 - Microscopy & Microanalysis CY - Portland, OR, USA DA - 2010-08-01 PY - 2010 AN - OPUS4-20907 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sonnenberg, Jost-Peter T1 - "Einbau" der TPED 2010 in RID/ADR 2011 T2 - Storck-Symposium 2010, 26. Internationale Gefahrgut-Tage Hamburg CY - Hamburg, Germany DA - 2010-02-21 PY - 2010 AN - OPUS4-20908 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hodoroaba, Vasile-Dan A1 - Rackwitz, Vanessa A1 - Reuter, Dirk T1 - Micro-Focus X-Ray Fluorescence (µ-XRF) as an Extension of the Analytical SEM T2 - Microscopy & Microanalysis CY - Portland, OR, USA DA - 2010-08-01 PY - 2010 AN - OPUS4-20909 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hennig, C. A1 - Takao, K. A1 - Takao, S. A1 - Ikeda-Ohno, A. A1 - Banerjee, D. A1 - Weiss, S. A1 - Zaenker, H. A1 - Kraus, Werner A1 - Emmerling, Franziska T1 - Chemical bonds and formation process of actinide (IV) oligomers and colloids T2 - 2010 Goldschmidt Conference CY - Knoxville, TN, USA DA - 2010-06-13 PY - 2010 AN - OPUS4-20911 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Beke, S. A1 - Sugioka, K. A1 - Midorikawa, K. A1 - Bonse, Jörn T1 - Near-IR femtosecond and VUV nanosecond laser processing of TeO2 crystals in air N2 - Near-IR femtosecond ( τ = 150 fs, λ = 775 nm, repetition rate 1 kHz) and VUV nanosecond (τ = 20 ns, λ = 157 nm, repetition rate 1 to 5 Hz) laser pulse ablation of single-crystalline TeO2 (c-TeO2, grown by the balance controlled Czochalski growth method) surfaces was performed in air using the direct focusing technique. The multi-method characterization using optical microscopy, atomic force microscopy and scanning electron microscopy revealed the surface morphology of the ablated craters. This allowed us to characterize precisely the lateral and vertical dimensions of the laser-ablated craters for different laser pulse energies and pulse numbers at each spot. Based on the obtained information, we quantitatively determined the ablation threshold fluence for the fs laser irradiation when different pulse numbers were applied to the same spot by using two independent extrapolation techniques. We found that in case of NIR femtosecond laser pulse irradiation, the ablation threshold significantly depends on the number of laser pulses applied to the same spot indicating that incubation effects play an important role in this material. In case of VUV ns laser pulses, the ablation rate is significantly higher due to the high photon energy and the predominantly linear absorption in the material. These results are discussed on the basis of recent models of the interaction of laser pulses with dielectrics. PY - 2010 DO - https://doi.org/10.1117/12.845074 SN - 0277-786X SN - 0038-7355 SN - 0361-0748 VL - 7584 SP - 758415-1 - 758415-10 PB - Soc. CY - Redondo Beach, Calif. [u.a.] AN - OPUS4-20912 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Quercetti, Thomas A1 - Musolff, André A1 - Müller, Karsten A1 - Droste, Bernhard A1 - Nakagami, Motonori A1 - Komatsuki, Seiji A1 - Fujisawa, Kyosuke T1 - Disposal Container Safety Assessment - Drop Tests with a "YOYUSHINDO-DISPOSAL" Waste Container onto a Concrete Target T2 - Waste Management Symposia 2010 CY - Phoenix, AZ, USA DA - 2010-03-07 PY - 2010 AN - OPUS4-20966 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Droste, Bernhard T1 - Aktuelle Entwicklungen auf dem Gebiet der verkehrsrechtlichen Behälterbauartprüfung T2 - 2. RAM-Behältersicherheitstage, BAM CY - Berlin, Germany DA - 2010-03-18 PY - 2010 AN - OPUS4-20967 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Taffe, Alexander A1 - Stoppel, Markus T1 - Neue Verfahren zu zerstörungsfreien Prüfungen an Betonbauwerken T2 - Betoninstandsetzung im Ingenieur- und Wohnungsbau CY - Filderstadt, Germany DA - 2010-03-04 PY - 2010 AN - OPUS4-20969 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nitsche, Michael T1 - Europäische Akkreditierungslandschaft und die Deutsche Akkreditierungsstelle (DAkkS) T2 - Arbeitskreis Qualitätsinfrastruktur CY - Berlin, Germany DA - 2010-02-23 PY - 2010 AN - OPUS4-20972 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Siegel, David A1 - Koch, Matthias A1 - Nehls, Irene T1 - Novel applications of hydrazine chemistry in the instrumental analysis of food mycotoxins T2 - Analytica 2010 conference CY - Munich, Germany DA - 2010-03-25 PY - 2010 AN - OPUS4-20973 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Matthias A1 - Köppen, Robert A1 - Rasenko, Tatjana A1 - Klein-Hartwig, Karin A1 - Nehls, Irene T1 - Certification of new reference materials - Fusarium mycotoxins in food T2 - 39. Deutscher Lebensmittelchemikertag CY - Stuttgart, Germany DA - 2010-09-20 PY - 2010 AN - OPUS4-20974 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Merkel, Stefan A1 - Köppen, Robert A1 - Koch, Matthias A1 - Nehls, Irene T1 - Untersuchungen zur Epimerisierung von Ergotalkaloiden T2 - 39. Deutscher Lebensmittelchemikertag CY - Stuttgart, Germany DA - 2010-09-20 PY - 2010 AN - OPUS4-20975 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas T1 - Neue Ansätze zur Werkstoffauswahl nichtrostender Stähle im Bauwesen T2 - 28. Gemeinschaftsveranstaltung SLV Hannover / TÜV Nord AG CY - Hanover, Germany DA - 2010-03-09 PY - 2010 AN - OPUS4-20896 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sarmiento Klapper, Helmuth A1 - Bäßler, Ralph A1 - Burkert, Andreas T1 - Localized Corrosion Phenomena of Passive Materials in Geothermal Fluids T2 - NACE Corrosion Conference 2010 CY - San Antonio, TX, USA DA - 2010-03-14 PY - 2010 AN - OPUS4-20897 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert A1 - Taffe, Alexander T1 - Development of the On-Site SCAnneR (OSSCAR) T2 - Transportation Research Board (TRB) 89th Annual Meeting CY - Washington, D.C., USA DA - 2010-01-09 PY - 2010 AN - OPUS4-20900 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert T1 - Application and Case Studies T2 - Transportation Research Board (TRB) 89th Annual Meeting, Workshop "Ultrasonic Imaging of Concrete" CY - Washington, D.C., USA DA - 2010-01-10 PY - 2010 AN - OPUS4-20901 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert T1 - Non-Destructive Testing of Reinforced Concrete Structures at BAM T2 - National Research Council (NRC) CY - Washington, D.C., USA DA - 2010-01-20 PY - 2010 AN - OPUS4-20902 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert T1 - Non-Destructive Testing in Civil Engineering T2 - Minnesota Department of Transportation CY - Minneapolis, MN, USA DA - 2010-01-22 PY - 2010 AN - OPUS4-20903 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert T1 - Research in Non-Destructive Testing in Civil Engineering at BAM T2 - University of Minnesota, Warren Lecture Series - Spring 2010 CY - Minneapolis, MN, USA DA - 2010-01-22 PY - 2010 AN - OPUS4-20904 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - MODINSYS - modular systems for the protection and repair of concrete structures T2 - 13th International Congress on Polymers in Concrete CY - Madeira, Portugal DA - 2010-02-10 PY - 2010 AN - OPUS4-20905 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mull, Birte A1 - Horn, Wolfgang A1 - Jann, Oliver T1 - Methode zur Bestimmung von flüchtigen Estern der Phthalsäure im Innenraum und in Emissionsmesskammern N2 - Die Analytik von Phthalaten (DMP bis DEHP) in der Luft ist mit thermischer Desorption unter Verwendung von Quarzwolle als Adsorbens erfolgreich realisierbar. Dies wurde durch eine Methodenvalidierung bestätigt. Es wurden sowohl Messungen im Innenraum als auch in Emissionskammern vorgenommen. In den Emissionskammermessungen wurden mögliche Senkeneffekte der Kammeroberfläche (Glas) untersucht. Unter Zuhilfenahme der idealen Abklingkurve wird bestätigt, dass diese Oberfläche eine Senke darstellt. PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-209870 UR - http://www.gefahrstoffe.de SN - 0949-8036 SN - 1436-4891 VL - 70 IS - 3 SP - 93 EP - 97 PB - VDI Fachmedien CY - Düsseldorf AN - OPUS4-20987 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schönhals, Andreas T1 - Vibrational and Molecular Dynamics of Nanoconfined Liquid Crystals T2 - Confit 2010 CY - Grenoble, France DA - 2010-03-03 PY - 2010 AN - OPUS4-20988 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wolff, Dietmar T1 - Schwerpunkte bei der Behälterbegutachtung aus Sicht der BAM T2 - 2. RAM-Behältersicherheitstage 2010, BAM CY - Berlin, Germany DA - 2010-03-18 PY - 2010 AN - OPUS4-20989 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dietrich, Paul A1 - Graf, Nora A1 - Gross, Thomas A1 - Lippitz, Andreas A1 - Schüpbach, B. A1 - Bashir, A. A1 - Wöll, Ch. A1 - Terfort, A. A1 - Unger, Wolfgang T1 - Self-assembled monolayers of aromatic omega-aminothiols on gold: surface chemistry and reactivity N2 - Amino-terminated self-assembled monolayers on gold substrates were studied by X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure (NEXAFS) measurements, and atomic force microscopy (AFM). Two different ω-amino-4,4'-terphenyl substituted alkanethiols of the general structure H2N-(C6H4)3-(CH2)n-SH (ATPn) were used: 2-(4''-amino-1,1':4',1''-terphenyl-4-yl)ethane-1-thiol (n = 2, ATP2) and 3-(4''-amino-1,1':4',1''-terphenyl-4-yl)propane-1-thiol (n = 3, ATP3). Moreover, the addressability of amino groups within the films was investigated by chemical derivatization of ATPn SAMs with 3,5-bis(trifluoromethyl)phenyl isothiocyanate (ITC) forming fluorinated thiourea ATPn-F films. Evaluation of high-resolution C 1s and N 1s XPS data revealed successful derivatization of at least 50% of surface amino species. Furthermore, it could be demonstrated by angle-resolved NEXAFS spectroscopy that chemical derivatization with ITC has no noticeable influence on the preferential upright orientation of the molecules in the SAMs. KW - Gold KW - Self-assembled monolayer KW - Thiols KW - Amino surfaces KW - XPS KW - NEXAFS PY - 2010 DO - https://doi.org/10.1021/la903293b SN - 0743-7463 SN - 1520-5827 VL - 26 IS - 6 SP - 3949 EP - 3954 PB - American Chemical Society CY - Washington, DC AN - OPUS4-20990 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - König, R. A1 - Scholz, G. A1 - Scheurell, K. A1 - Heidemann, D. A1 - Buchem, I. A1 - Unger, Wolfgang A1 - Kemnitz, E. T1 - Spectroscopic characterization of crystalline AIF3 phases N2 - A comprehensive spectroscopic characterization of all known crystalline AlF3 phases (α-, β-, η-, κ-, θ-AlF3) is presented for the first time in this study. Beside their X-ray diffraction powder patterns, which were already published in the literature, 27Al and 19F MAS NMR, FT IR and XPS spectroscopic techniques were applied for all phases in a consistent manner. For all phases prepared the utilization of 27Al satellite transition (SATRAS) NMR allowed to determine the quadrupolar parameters of the aluminium sites including their distributions. In addition, η-AlF3 was isolated with high phase purity and characterized following a new preparation path different from those known so far in the literature. KW - Crystalline aluminium fluorides KW - Solid state NMR KW - FT IR KW - XPS PY - 2010 DO - https://doi.org/10.1016/j.jfluchem.2009.10.015 SN - 0022-1139 SN - 1873-3328 VL - 131 IS - 1 SP - 91 EP - 97 PB - Elsevier CY - Amsterdam AN - OPUS4-20991 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Ulrich A1 - Pfister, Sabine T1 - Möglichkeiten und Grenzen der Vorhersage von Brandszenarien in Industrieanlagen T2 - DECHEMA-Kolloquium "Vorbeugender Brandschutz in Industrieanlagen" CY - Frankfurt am Main, Germany DA - 2010-03-11 PY - 2010 AN - OPUS4-20992 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bonse, Jörn A1 - Maerten, L. A1 - Rosenfeld, A. A1 - Krüger, Jörg T1 - Transient changes of the optical properties of solids during femtosecond laser pulse irradiation and its implications for the formation of lase-induced periodic surface structures T2 - European Materials Research Society (EMRS) Spring Meeting, Symposium R "Laser processing an diagnostics for micro and nano applications" CY - Strasbourg, France DA - 2010-06-07 PY - 2010 AN - OPUS4-20993 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Die Zulassung von Geokunststoffen, Polymeren und Dichtungskontrollsystemen nach der neuen Deponieverordnung T2 - 26. Fachtagung "Die sichere Deponie" CY - Würzburg, Germany DA - 2010-02-18 PY - 2010 AN - OPUS4-20995 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühl, Christiane T1 - Novellierung der Technischen Regel für Rohrfernleitungen (TRFL) PY - 2010 SN - 978-3-8027-5333-6 N1 - Serientitel: Schriftenreihe aus dem Institut für Rohrleitungsbau Oldenburg – Series title: Schriftenreihe aus dem Institut für Rohrleitungsbau Oldenburg VL - 34 SP - 552 EP - 562 PB - Vulkan AN - OPUS4-20976 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Hübner, M. A1 - Amir, J. M. A1 - Müller, H. T1 - Qualitätssicherung von Pfahlwänden mit der Ultraschallmethode - eine Machbarkeitsstudie T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - Bohrpfahlwand KW - Ultraschallmethode PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 SP - 1 EP - 9 CY - Berlin AN - OPUS4-20979 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Roos, P.H. A1 - Jakubowski, Norbert T1 - Methods for the discovery of low-abundance biomarkers for urinary bladder cancer in biological fluids N2 - For the study of bladder cancer and the identification of respective tumor markers, blood and, in particular, urine constitute suitable sources of biological material, while both harboring their specific challenges for analytics concerning low-abundance biomarkers. Dissolved proteins and nucleic acids as well as cells and cell-bound molecules can be the analytes. In urine, exfoliated bladder tumor cells have to be identified and in blood, circulating tumor cells have to be detected among huge amounts of other cells. For the detection of both low-abundance cells and molecules, their specific enrichment prior to analysis is advantageous or even necessary. Adapted methods for the analysis of proteomes and subproteomes by 2D-gel electrophoresis, multidimensional chromatography and antibody arrays are discussed. Analysis of nucleic acid-based markers exploits the high amplification power of PCR and modified PCR combined with previous (subtransciptomes) or subsequent (microarray) enrichment to sensitively and specifically detect markers. DNA mutations, DNA-methylation status and apoptotic DNA fragments, as well as levels of ribonucleic acids including microRNAs, can be analyzed by means of these methods. Finally, the challenge of identifying circulating tumor cells and assigning them to their original tissue is critically discussed. PY - 2010 DO - https://doi.org/10.4155/BIO.09.174 SN - 1757-6180 VL - 2 IS - 2 SP - 295 EP - 309 PB - Future Science Group CY - London AN - OPUS4-20981 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang T1 - Investigation of curing behaviour of melamine/phenolic (MP) thermosets N2 - Commercially available melamine/phenolic (MP) moulding compounds used for manufacturing electro installation parts were investigated by laboratory thermal analysis methods: Dynamic Mechanical Analysis (DMA), Differential Scanning Calorimetry (DSC) and Dielectric Analysis (DEA). The results were compared with on-line measurements in a compression mould using incorporated dielectric and ultrasound sensors. Softening and cross-linking behaviour were analyzed. For on-line process monitoring, only the ultrasound method worked well. The dielectric method was distorted by water formed as a by-product from the poly-condensation reaction. KW - Thermoset KW - Melamine KW - Phenol KW - Moulding compound KW - Cross-linking KW - DSC PY - 2010 DO - https://doi.org/10.1016/j.polymertesting.2010.05.008 SN - 0142-9418 VL - 29 IS - 6 SP - 723 EP - 728 PB - Elsevier Science CY - Amsterdam [u.a.] AN - OPUS4-20982 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Taffe, Alexander A1 - Stoppel, Markus A1 - Wiggenhauser, Herbert T1 - Zerstörungsfreie Prüfverfahren im Bauwesen (ZfPBau) T2 - Betoninstandsetzung im Ingenieur- und Wohnungsbau CY - Filderstadt/Stuttgart, Deutschland DA - 2010-03-04 KW - Zerstörungsfreie Prüfung im Bauwesen KW - ZfPBau KW - Radar KW - Ultraschallecho KW - Automatisierung KW - Radiographie KW - OSSCAR KW - BetoScan PY - 2010 SP - 35 EP - 58 AN - OPUS4-20984 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bartscher, M. A1 - Neukamm, M. A1 - Hilpert, U. A1 - Neuschaefer-Rube, U. A1 - Härtig, F. A1 - Kniel, K. A1 - Ehrig, Karsten A1 - Staude, Andreas A1 - Goebbels, Jürgen T1 - Achieving traceability of industrial computed tomography KW - Industrial computed tomography (CT) KW - Coordinate metrology KW - Traceability PY - 2010 DO - https://doi.org/10.4028/www.scientific.net/KEM.437.79 SN - 1013-9826 VL - 437 SP - 79 EP - 83 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-20985 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scherer, Christian A1 - Noskov, S. A1 - Schupp, W. A1 - Maskos, Michael T1 - Influence of Ionic Strength and different Electrolytes on the Retention in AF-FFF T2 - 239th American Chemical Soyciety National Meeting CY - San Francisco, CA, USA DA - 2010-03-21 PY - 2010 AN - OPUS4-21039 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - In-situ Untersuchungen an zementgebundenen Baustoffen mittels röntgengraphischer Verfahren T2 - Jährlicher Workshop der Deutschen Mineralogischen Gesellschaft (DMG) CY - Bad Münster, Germany DA - 2010-02-24 PY - 2010 AN - OPUS4-21040 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Beck, Matthias T1 - Zur Entwicklung der Eigenkorrosion von Stahl in Beton N2 - Sicherheit und Dauerhaftigkeit von Stahlbetonbauwerken sind einer der wichtigsten Ansprüche bei der Bemessung von Gebäuden. Normen und Vorschriften beinhalten nur allgemeine Anforderungen an Betonqualität und Betondeckung. In besonders kritischen Fällen, beispielsweise dem Eindringen von Chloriden ist die Applikation von Beschichtungen häufig die einzige Möglichkeit die Bewehrung effektiv vor der Initiierung der Korrosion zu schützen. Im Fall der Depassivierung der Bewehrung ist die Modellierung der Korrosion eine geeignete Methode um eine Lebensdauerbemessung zu gewährleisten. In der Praxis wird die Bewehrung lokal durch in den Beton eingedrungene Chloride depassiviert und es bilden sich an dieser Stelle eng begrenzte, loch und muldenartige anodische Bereiche aus, die kathodischen Bereichen gegenüber stehen. Nach einer Zeit tritt an der Anode ein signifikanter Massenverlust auf, der aufgrund einer anodischen Eisenauflösung infolge eines Stromflusses zwischen anodischen und kathodischen Bereichen verursacht wird. Dabei kann das Flächenverhältnis zwischen anodischen und kathodischen Bereichen in einer Größenordnung von mehreren Dekaden schwanken und wird als Makroelementkorrosion bezeichnet. Die realen Massenverluste, die in der Praxis vorgefunden werden, liegen allerdings of bedeutend höher. Dieser zusätzliche Anteil an Korrosionsabtrag, der nicht auf Makroelementkorrosion zurückzuführen ist, wird als Eigenkorrosion bezeichnet. Dabei handelt es sich um eine zusätzliche Eisenauflösung auf der Anode, die durch die Hydrolyse in den Löchern verursacht wird. Dieser Eigenkorrosionsanteil muss daher bei der Lebensdauerbemessung eines Bauwerkes berücksichtigt werden. Ziel der vorliegenden Arbeit ist daher die Entwicklung der Eigenkorrosion, sowie die Entwicklung der anodischen Bereiche mit Hilfe elektrochemischer Parameter, Massenverluste und der Computertomografie zu beschreiben. Die elektrochemischen Parameter wurden dabei mit üblichen elektrochemischen Methoden aufgezeichnet und in Abhängigkeit von verschiedenen Betonparametern und Klimaten aufgetragen. Abschließend wird die Entwicklung der Eigenkorrosion in Abhängigkeit der verschiedenen Parameter in dieser Arbeit gezeigt und diskutiert. KW - Korrosionsfortschritt KW - Eigenkorrosion KW - Elektrochemische Messungen KW - Freies Korrosionspotential KW - Polarisationswiderstand KW - Abtragsraten KW - Massenverlust KW - Computertomografie PY - 2010 UR - http://darwin.bth.rwth-aachen.de/opus3/volltexte/2010/3148/ SP - 1 EP - 140 AN - OPUS4-21044 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kim, K.J. A1 - Kim, J.W. A1 - Moon, D.W. A1 - Wirth, Thomas A1 - Hodoroaba, Vasile-Dan A1 - Gross, Thomas A1 - Unger, Wolfgang A1 - Jordaan, W. A1 - Staden, M.v. A1 - Prins, S. A1 - Wang, H. A1 - Song, X. A1 - Zhang, L. A1 - Fujimoto, T. A1 - Kojima, I. T1 - Final report on key comparison K67 and parallel pilot study P108: measurement of composition of a thin Fe-Ni alloy film N2 - The Key Comparison K67 and the parallel Pilot Study P108 on quantitative analysis of thin alloy films have been completed in the Surface Analysis Working Group (SAWG) of the Consultative Committee for Amount of Substance (CCQM). The aim of these inter-laboratory comparisons is to determine the degree of equivalence in the measurement capability of national metrology institutes (NMIs) and designated institutes (DIs) for the determination of the composition of thin alloy films. The measurand is expressed in atomic percent. A Fe-Ni alloy film with a certified composition was available for the participants of the inter-laboratory comparison. It has been used as a reference specimen to determine the relative sensitivity factors (RSF) of Fe and Ni for the different analytical methods used by the participants to determine the composition of the test sample. As was shown in the preceding Pilot Study P98, the degrees of equivalence in the measurement capabilities of the participants can be improved in that way. The composition of the reference specimen was certified by inductively coupled plasma mass spectrometry (ICP-MS) using the isotope dilution method. The in-depth and lateral homogeneity, determined in terms of elemental composition, of the certified reference sample and the unknown test sample were confirmed by secondary ion mass spectrometry (SIMS) using C60 primary ions by the leading laboratory. Five laboratories participated in the key comparison. Four of them used x-ray photoelectron spectroscopy (XPS) and one Auger electron spectroscopy (AES). One laboratory participated in the parallel P108 pilot study using electron probe micro analysis with an energy-dispersive spectrometer (ED EPMA) and XPS. KW - XPS KW - AES KW - EDX KW - Fe-Ni alloy film KW - Key comparison KW - CCQM PY - 2010 DO - https://doi.org/10.1088/0026-1394/47/1A/08011 SN - 0026-1394 SN - 1681-7575 VL - 47 IS - 1A SP - 08011-1 - 08011-15 PB - Inst. of Physics Publ. CY - Bristol AN - OPUS4-21045 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jakubcová, Petra A1 - Schnell, A. A1 - Rübner, Katrin A1 - Müller, A. A1 - Meng, Birgit T1 - Nutzung von Bau- und Abbruchabfällen zur Herstellung von Recyclinggranulaten T2 - Tagung "Bauchemie" CY - Dortmund, Germany DA - 2010-10-07 PY - 2010 AN - OPUS4-20996 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Frunza, L. A1 - Frunza, S. A1 - Zgura, I. A1 - Beica, T. A1 - Gheorghe, N. A1 - Ganea, P. A1 - Stoenescu, D. A1 - Dinescu, A. A1 - Schönhals, Andreas T1 - Involvement of cyan and ester groups in surface interactions of aerosil-cyanophenyl alkyl benzoate systems wih high silica density: infrared investigations N2 - Composites prepared from aerosil A380 and liquid crystals (LCs) of 4-n-alkyl-4'-cyanophenyl benzoate type, with four to six carbon atoms in the alkyl chain were investigated by infrared spectroscopy. Their high silica content (of 2-7 g aerosil/1 g of LC) was given by thermogravimetric investigations and allows the observation of a rather thin LC layer on the silica particles. Several surface species onto the external surface of the grains were demonstrated. Arguments are given that monomer and dimer species are present in the bulk cyanophenyl benzoate materials while bulk-like species along with hydrogen-bonded ones coexist in the so-called surface layer of the composites. The main interaction of LC molecules with the aerosil surface is by hydrogen bonding taking place with the involvement of the cyan group. There is a contribution of ester carbonyl group to these surface interactions but this cannot be well quantified. KW - Cyanophenyl alkyl benzoate KW - Aerosil composites KW - Infrared spectra KW - Band shape analysis PY - 2010 DO - https://doi.org/10.1016/j.saa.2009.12.029 SN - 1386-1425 SN - 0370-8322 SN - 1873-3557 SN - 0584-8539 VL - 75 IS - 4 SP - 1228 EP - 1235 PB - Elsevier CY - Amsterdam AN - OPUS4-20997 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Körner, W. A1 - Walker, G. A1 - Horn, Wolfgang A1 - Woppowa, L. A1 - Gruber, L. A1 - Hansen, D. A1 - Haring, C. A1 - Hartmann, R. A1 - Heitmann, D. A1 - Karn, C. A1 - Uhde, E. A1 - Winkens, A. T1 - Messen von Phthalaten in der Innenraumluft mit GC/MS N2 - Im Rahmen der Richtlinienarbeit der Kommission Reinhaltung der Luft im VDI und DIN - Normenausschuss KRdL wurde ein Ringversuch zur Validierung des Analysenverfahrens für Phthalate in der Innenraumluft durchgeführt. Dabei wurden die beiden in der künftigen Richtlinie beschriebenen Analysenverfahren der Thermodesorption von Adsorptionsröhrchen sowie der Lösemittelextraktion von Florisilröhrchen mit jeweils anschließender Gaschromatographie und Massenspektrometrie (GC/MS) erprobt. Die Ergebnisse des Ringversuchs belegen die Vergleichbarkeit der beiden Verfahren. Auch die Richtigkeit der Ergebnisse im Rahmen einer akzeptablen Streuung sowie die Praktikabilität in der Praxis konnten bestätigt werden. Weiterhin wurden wichtige Erkenntnisse zur Minimierung der Blindwerte erarbeitet. KW - Emissionen KW - Richtlinie KW - Phthalate KW - Ringversuch PY - 2010 SN - 0949-8036 SN - 0039-0771 SN - 1436-4891 VL - 70 IS - 3 SP - 89 EP - 92 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-20998 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Philipp, Rosemarie A1 - Hanebeck, Olaf A1 - Hein, Sebastian A1 - Bremser, Wolfram A1 - Win, Tin A1 - Nehls, Irene T1 - Ethanol/water solutions as certified reference materials for breath alcohol analyzer calibration N2 - The Federal Institute for Materials Research and Testing (BAM), Germany, has issued a series of large volume ethanol in water certified reference materials (CRMs), primarily developed for the calibration of evidential breath alcohol analyzers in Germany. The certified parameter is the ethanol mass concentration at 20 °C. When used in a wet bath simulator, the solutions deliver gas samples that meet the requirements set by the Organization of Legal Metrology for calibration of breathalyzers. The materials were prepared gravimetrically by spiking of ethanol into water in single 5 L units. A complete uncertainty budget for the preparation process has been established. The purity of the commercial ethanol stock solution was identified to be the main source of uncertainty. For stability and homogeneity measurements and for the verification of the gravimetric mass concentration of the CRMs, a robust high-precision gas chromatography, with flame-ionization detection method for ethanol determination in aqueous samples was developed and validated. The good performance of this method has been demonstrated in several international comparisons organized by the Consultative Committee for Amount of Substance-Metrology in Chemistry at the International Bureau of Weights and Measures. KW - Certified reference material KW - Ethanol in water KW - Breath alcohol KW - GC-FID PY - 2010 DO - https://doi.org/10.1007/s00769-009-0605-9 SN - 0949-1775 SN - 1432-0517 VL - 15 IS - 3 SP - 141 EP - 146 PB - Springer CY - Berlin AN - OPUS4-20999 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Körner, Ursula T1 - Anpassung der Gefahrgutregeln zur Qualitätssicherung und Überwachung T2 - Sitzung des Arbeitskreises "Informationsaustausch Qualitätssicherung und Überwachung bei der Herstellung von Gefahrgutverpackungen - Metall" CY - Berlin, Germany DA - 2010-03-17 PY - 2010 AN - OPUS4-21000 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wytrykus, Nancy T1 - Aktuelles zur Qualitätssicherung und Überwachung T2 - Sitzung des Arbeitskreises "Informationsaustausch Qualitätssicherung und Überwachung bei der Herstellung von Gefahrgutverpackungen - Metall" (INÜQ-Metall) CY - Berlin, Germany DA - 2010-03-17 PY - 2010 AN - OPUS4-21002 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neitsch, Marcel T1 - Neue Überwachungsberichtsunterlagen für Verpackungen und IBC aus Metall T2 - Sitzung des Arbeitskreises "Informationsaustausch Qualitätssicherung und Überwachung bei der Herstellung von Gefahrgutverpackungen - Metall" (INÜQ-Metall) CY - Berlin, Germany DA - 2010-03-17 PY - 2010 AN - OPUS4-21003 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hasenstab, A. A1 - Neumann, H.-H. A1 - Arndt, Ralf A1 - Bluhm, J. A1 - Maierhofer, Christiane T1 - Praktische Untersuchungen an Kulturgütern und Verkehrsbauten in der Baudenkmalpflege T2 - Fachtagung Bauwerksdiagnose CY - Berlin, Germany DA - 2010-02-18 PY - 2010 AN - OPUS4-21004 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Project "UNACON" - Use of multifunctional Nano-Additions for innovative high-performance CONcrete stones T2 - Konferenz der Fördermittelgeber und Forschungsträger im 7. Rahmenprogramm der EU Sektion "Evaluation CORNET und ERASME" CY - Berlin, Germany DA - 2010-01-29 PY - 2010 AN - OPUS4-21005 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja ED - Ziegahn, K.-F. T1 - Zusammenhang von molekularen Alterungsvorgängen und beobachtbaren Eigenschaftsänderungen bei der Bewitterung von Polymeren T2 - 39. Jahrestagung der GUS 2010 - Umweltflüsse erfassen, simulieren, bewerten CY - Stutensee, Deutschland DA - 2010-03-17 KW - Bewitterung KW - Alterung KW - Eigenschaftsänderung KW - Korrelation PY - 2010 SN - 978-3-9813136-0-4 SP - 45 EP - 55 PB - DWS Werbeagentur und Verlag GmbH CY - Pfinztal AN - OPUS4-21047 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Siegel, David A1 - Andrae, K. A1 - Proske, Matthias A1 - Kochan, Cindy A1 - Koch, Matthias A1 - Weber, M. A1 - Nehls, Irene T1 - Dynamic covalent hydrazine chemistry as a selective extraction and cleanup technique for the quantification of the Fusarium mycotoxin zearalenone in edible oils N2 - A novel, cost-efficient method for the analytical extraction of the Fusarium mycotoxin zearalenone (ZON) from edible oils by dynamic covalent hydrazine chemistry (DCHC) was developed and validated for its application with high performance liquid chromatography-fluorescence detection (HPLC-FLD). ZON is extracted from the edible oil by hydrazone formation on a polymer resin functionalised with hydrazine groups and subsequently released by hydrolysis. Specifity and precision of this approach are superior to liquid partitioning or gel permeation chromatography (GPC). DCHC also extracts zearalanone (ZAN) but not α-/β-zearalenol or -zearalanol. The hydrodynamic properties of ZON, which were estimated using molecular simulation data, indicate that the compound is unaffected by nanofiltration through the resin pores and thus selectively extracted. The method's levels of detection and quantification are 10 and 30 µg/kg, using 0.2 g of sample. Linearity is given in the range of 10-20,000 µg/kg, the average recovery being 89%. Bias and relative standard deviations do not exceed 7%. In a sample survey of 44 commercial edible oils based on various agricultural commodities (maize, olives, nuts, seeds, etc.) ZON was detected in four maize oil samples, the average content in the positive samples being 99 µg/kg. The HPLC-FLD results were confirmed by HPLC-tandem mass spectrometry and compared to those obtained by a liquid partitioning based sample preparation procedure. KW - Zearalenone KW - Extraction KW - Edible oil KW - Maize KW - Dynamic covalent hydrazine chemistry KW - Hydrazone KW - SPE KW - Hydrodynamic radius KW - HPLC-FLD PY - 2010 DO - https://doi.org/10.1016/j.chroma.2010.02.019 SN - 0021-9673 VL - 1217 IS - 15 SP - 2206 EP - 2215 PB - Elsevier CY - Amsterdam AN - OPUS4-21048 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Meng, Birgit A1 - Müller, Urs A1 - Rübner, Katrin ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Components in concrete and their impact on quality: an overview KW - Concrete KW - Cement KW - Aggregate KW - Microstructure KW - Durability PY - 2010 SN - 978-1-84569-560-6 VL - 1 IS - Chapter 5 SP - 82 EP - 93 PB - Woodhead Publishing Ltd CY - Oxford AN - OPUS4-21049 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Müller, Urs A1 - Meng, Birgit A1 - Rübner, Katrin ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Analysis of solid components and their ratios in reinforced concrete structures KW - Concrete analysis KW - Concrete petrography KW - Optical microscopy KW - Scanning electron microscopy KW - Micro X-ray fluorescence analysis PY - 2010 SN - 978-1-84569-560-6 VL - 1 IS - Chapter 9 SP - 180 EP - 197 PB - Woodhead Publishing Ltd CY - Oxford AN - OPUS4-21050 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Isecke, Bernd A1 - Burkert, Andreas A1 - Lehmann, Jens A1 - Ebell, Gino T1 - Korrosions- und Verbundverhalten verzinkter Betonstähle in Betonen mit chromatreduzierten Zementen KW - Verzinkter Betonstahl KW - Chromatreduzierte Zemente KW - Verbundverhalten KW - Dauerhaftigkeit KW - Korrosion PY - 2010 SN - 978-3-8167-8251-3 IS - Bauforschung T3230 SP - 1 EP - 61 PB - Fraunhofer IRB Verl. CY - Stuttgart AN - OPUS4-21051 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Comparsion of the resistance to oxidative degradation of polyethylene grades with the test performance behaviour of packagings for the transport of dangerous goods T2 - CORROSION 2010 CY - San Antonio, TX, USA DA - 2010-03-14 PY - 2010 AN - OPUS4-21052 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - EuP - concrete Requirements concerning displays T2 - 33. Arbeitsgruppensitzung des German Flat Panel Display Forum CY - Regensburg, Germany DA - 2010-03-25 PY - 2010 AN - OPUS4-21053 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - Einführungsvortrag zur Podiumsdiskussion "Bilanz und Stand der Umsetzung der Ökodesign-Richtlinie" T2 - Workshop des BDI zur Ökodesignrichtlinie, Haus der Deutschen Wirtschaft CY - Berlin, Germany DA - 2010-03-18 PY - 2010 AN - OPUS4-21054 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Shokouhi, Parisa A1 - Zoëga, Andreas A1 - Wiggenhauser, Herbert A1 - Fischer, G. T1 - Macro-Effect of Microcracks on Sonic Surface Wave Velocity in Concrete under Compression T2 - Transportation Research Board TRB 2010, 89th Annual Meeting CY - Washington, D.C., USA DA - 2010-01-10 PY - 2010 AN - OPUS4-21060 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin, Tina A1 - Trela, Christiane A1 - Kind, Thomas A1 - Gil, Magdalena A1 - Wöstmann, Jens T1 - Untersuchungen zur Detektion von Granitgrenzsteinen mit Georadar T2 - 70. Jahrestagung der Deutschen Geophysikalischen Gesellschaft DGG CY - Bochum, Germany DA - 2010-03-15 PY - 2010 AN - OPUS4-21062 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Mecke, R. A1 - Schiller, M. A1 - Kalisch, U. A1 - Meinhardt, J. A1 - Hennen, C. T1 - Kombination der aktiven Thermografie mit laserbasierten Verfahren zur Erfassung von 3D-Geometrien in der Denkmalpflege T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - ZfPBau KW - Denkmalpflege KW - Statue KW - Aktive Thermografie KW - Lichtschnittverfahren KW - Laserscanner KW - Verfahrenskombination PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 (Poster 06) SP - 1 EP - 8 CY - Berlin AN - OPUS4-21063 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Maierhofer, Christiane A1 - Höhn, J. T1 - Thermografie am Schichtsystem Putz auf Beton im Labor und in der Praxis T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - ZfPBau KW - Putzablösung KW - Betondecke KW - Aktive Thermografie PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 (Poster 07) SP - 1 EP - 9 CY - Berlin AN - OPUS4-21064 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, A. A1 - Neumann, H.-H. A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Bluhm, J. T1 - Praktische Untersuchungen an Kulturgütern und Verkehrsbauten in der Baudenkmalpflege T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - ZfPBau KW - Kulturgüter KW - Fallstudien KW - Radar KW - Aktive Thermografie KW - Endoskopie PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 (Vortrag 11) SP - 1 EP - 14 CY - Berlin AN - OPUS4-21065 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe A1 - Baier, Jennifa A1 - Hertwig, Andreas A1 - Stephanowitz, Ralph A1 - Weise, Matthias T1 - Optical Mapping and Imaging for Quality Control of Thin Films and Surfaces T2 - ICCG 8, The 8th International Conference on Coatings on Glass and Plastics - Advanced Coatings for Large Area or High-Volume Products CY - Braunschweig, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-21026 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Symietz, Christian A1 - Lehmann, Erhard A1 - Berger, Georg A1 - Krüger, Jörg T1 - Fixation of bioactive calcium alkali phosphate on Ti6Al4V implant material with femtosecond laser pulses T2 - European Materials Reserarch Society, EMRS, Spring Meeting 2010 CY - Strasbourg, France DA - 2010-06-07 PY - 2010 AN - OPUS4-21027 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bras, A. A1 - Fonseca, I. M. A1 - Affouard, F. A1 - Schönhals, Andreas A1 - Dionisio, M. A1 - Correia, N.T. T1 - Confining Effects in the Molecular Dynamics of Ibuprofen investigated by Dielectric Relaxation Spectroscopy T2 - Confit 2010 CY - Grenoble, France DA - 2010-03-03 PY - 2010 AN - OPUS4-21028 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Resch-Genger, Ute A1 - Hoffmann, Katrin A1 - Würth, Christian A1 - Behnke, Thomas A1 - Hoffmann, Angelika T1 - Problem-adaptable multifunctional calibration tools for the traceable characterization of fluorescence measuring systems T2 - Analytica CY - Munich, Germany DA - 2010-03-23 PY - 2010 AN - OPUS4-21029 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogl, Jochen T1 - Traceability in Environmental Analysis Possible Routes and examples from Germany for elemental analysis T2 - Seminar: Metrology in Chemistry CY - New Delhi, India DA - 2010-03-12 PY - 2010 AN - OPUS4-21030 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Negendank, Detlef A1 - Lohse, Volkmar T1 - Gaswarnsysteme in der Sicherheitstechnik - Anforderungen an Messfunktion und funktionale Sicherheit T2 - 12. BAM/PTB-Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik, BAM CY - Berlin, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-21006 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias A1 - Berger, L.-M. A1 - Saaro, S. A1 - Stahr, C.C. A1 - Thiele, S. T1 - High-temperature sliding wear of APS-sprayed coatings of the Cr2O3-TiO2 system T2 - 14th NordTrib Conference CY - Älvsbyn, Sweden DA - 2010-06-08 PY - 2010 AN - OPUS4-21007 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Kühne, Hans-Carsten T1 - Schutz und Instandsetzung von Betonglasfenstern des 20. Jahrhunderts T2 - Workshop "Betonglasrestaurierung" CY - Paderborn, Germany DA - 2010-03-02 PY - 2010 AN - OPUS4-21008 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Ünal, Murat T1 - Technique for the protection and repair of concrete structures - a useful task for affected historical glass-concrete windows T2 - Fachtagung "Walls of Light and Colour", Dalles de Verres and Windows without Lead, History, Creation and Conversation, University of York CY - York, England DA - 2010-03-09 PY - 2010 AN - OPUS4-21009 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Ünal, Murat T1 - Cement and Concrete Technology T2 - Fachtagung "Walls of Light and Colour", Dalles de Verres and Windows without Lead, History, Creation and Conversation, University of York CY - York, England DA - 2010-03-09 PY - 2010 AN - OPUS4-21010 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang A1 - Teteris, Gundars A1 - Braun, Ulrike A1 - Bohmeyer, W. T1 - Kontrolle des Vernetzungsverhaltens von reaktiven Kunststoffen T2 - 2. Wildauer Duromer-Tagung CY - Wildau, Germany DA - 2010-03-11 PY - 2010 AN - OPUS4-21011 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Retzlaff, J. A1 - Böhning, Martin A1 - Robertson, Daniela A1 - Schröder, Hartmut A1 - Müller-Rochholz, J. T1 - Untersuchungen zur Oxidationsbeständigkeit von Geokunststoffen T2 - Fachtagung der Kompetenzplattformen "Life Cycle Assessment (LCA) neuer Kunststoffe der FH Münster und "Polymere Materialien" der FH Aachen CY - Münster, Germany DA - 2010-02-25 PY - 2010 AN - OPUS4-21012 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Zusammenhang von molekularen Alterungsvorgängen und beobachtbaren Eigenschaftsänderungen bei der Bewitterung von Polymeren T2 - 39. Jahrestagung der Gesellschaft für Umweltsimulation (GUS) CY - Stutensee, Germany DA - 2010-03-17 PY - 2010 AN - OPUS4-21013 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maskos, Michael A1 - Thiermann, Raphael A1 - Luty-Blocho, M. A1 - Fitzner, K. A1 - Meierott, S. A1 - Metzke, D. A1 - Löb, P. A1 - Hessel, V. A1 - Müller, P. T1 - Micromixers Offering New Process Windows for the Controlled Synthesis of Polymeric and Polymer-coated Nanoparticles T2 - 11th International Conference on Microreaction Technology (IMRETT 11) CY - Kyoto, Japan DA - 2010-03-08 PY - 2010 AN - OPUS4-21014 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang A1 - Teteris, Gundars A1 - Braun, Ulrike A1 - Bohmeyer, W. T1 - Kontrolle der Härtung bei reaktiven Formmassen und Faserverbundbauteilen T2 - 2. Wildauer Duromer-Tagung CY - Wildau, Germany DA - 2010-03-11 PY - 2010 AN - OPUS4-21015 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bantz, C. A1 - Galla, H.-J. A1 - Harishchandra, R. K. A1 - Kirkpatrick, C. J. A1 - Hermanns, M. I. A1 - Kasper, J. A1 - Stauber, R. H. A1 - Docter, D. A1 - Maskos, Michael T1 - Toxicity of synthetic nanoparticles exposed to the lung: Characterisation of siloxane based particles for cell studies T2 - 6th Zsigmondy Colloquium CY - Chemnitz, Germany DA - 2010-03-22 PY - 2010 AN - OPUS4-21016 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Noskov, Sergey A1 - Scherer, Christian A1 - Maskos, Michael T1 - Determination of Hamaker constants by Asymmetrical Flow Field Flow Fractionation (AF-FFF) T2 - 6th Zsigmondy Colloquium CY - Chemnitz, Germany DA - 2010-03-22 PY - 2010 AN - OPUS4-21017 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koshkina, O. A1 - Bantz, C. A1 - Utech, St. A1 - Maskos, Michael T1 - Fluorescence Dye-Iabelled Polyorganosiloxane Nanospheres for Biomedical Applications T2 - 6th Zsigmondy Colloquium CY - Chemnitz, Germany DA - 2010-03-22 PY - 2010 AN - OPUS4-21018 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Robertson, Daniela A1 - Schröder, Hartmut A1 - Brummermann, K. A1 - Kaundinya, I. A1 - Saathoff, F. T1 - Möglichkeiten der Abschätzung der Langzeitbeständigkeit von Kunststoffdichtungsbahnen (KDB) auf Polyolefinbasis für den Tunnelbau T2 - Fachtagung der Kompetenzplattformen "Life Cycle Assessment (LCA)" neuer Kunststoffe der FH Münster und "Polymere Materialien" der FH Aachen CY - Münster, Germany DA - 2010-02-25 PY - 2010 AN - OPUS4-21019 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wilke, Olaf T1 - Analytische und sensorische Bewertung von Holz T2 - Abschlussveranstaltung zum UFOPLAN-Projekt "Sensorische Bewertung von Bauprodukten" CY - Berlin, Germany DA - 2010-03-08 PY - 2010 AN - OPUS4-21020 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Prager, Jens A1 - Hoever, Carsten A1 - Kreutzbruck, Marc T1 - Untersuchungen zur Anregung geführter Wellen in Platten mittels Gruppenstrahlertechnik T2 - DAGA Berlin; 36. Jahrestagung für Akustik CY - Berlin, Germany DA - 2010-03-15 PY - 2010 AN - OPUS4-21022 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dey, Anika A1 - Pohl, Rainer A1 - Thomas, Hans-Martin A1 - Heyder, R. A1 - Krull, R. T1 - Früherkennung von Rollkontaktermüdung T2 - DGZfP-Fachtagung 2010, ZfP im Eisenbahnwesen CY - Wittenberge, Germany DA - 2010-03-16 PY - 2010 AN - OPUS4-21023 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Mecke, R. A1 - Schiller, M. A1 - Kalisch, U. A1 - Meinhardt, J. A1 - Hennen, C. T1 - Kombination der aktiven Thermografie mit laserbasierten Verfahren zur Erfassung von 3D-Geometrien in der Denkmalpflege T2 - Fachtagung Bauwerksdiagnose CY - Berlin, Germany DA - 2010-02-18 PY - 2010 AN - OPUS4-21024 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Maierhofer, Christiane A1 - Höhn, J. T1 - Thermografie am Schichtsystem Putz auf Beton im Labor und in der Praxis T2 - Fachtagung Bauwerksdiagnose CY - Berlin, Germany DA - 2010-02-18 PY - 2010 AN - OPUS4-21025 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marchetti, Barbara A1 - von Chrzanowski, Lars A1 - Beckmann, Jörg A1 - Schade, U. A1 - Röseler, A. T1 - Concept of a THz Ellipsometer to derive the optical constants of liquids T2 - 456. WE-Heraeus Seminar: THz Radiation: Generation, Detection and Applications CY - Bad Honnef, Germany DA - 2010-04-18 PY - 2010 AN - OPUS4-21176 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nießner, R. A1 - Broekaert, J.A. A1 - Bron, M. A1 - Einax, J. A1 - Emons, H. A1 - Haisch, C. A1 - Huber, C. A1 - Jakubowski, Norbert A1 - Knopp, D. A1 - Popp, J. A1 - Schäferling, M. T1 - Analytische Chemie 2008/2009 PY - 2010 DO - https://doi.org/10.1002/nadc.201063123 SN - 1439-9598 SN - 1521-3854 VL - 58 IS - 3 SP - 223 EP - 235 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-21177 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ballheimer, Viktor A1 - Koch, Frank A1 - Kuschke, Christian A1 - Droste, Bernhard T1 - Similarity aspects for closure systems in reduced scale package drop testing KW - Transport cask KW - Drop test KW - Scale model KW - Closure system KW - Bolted joints PY - 2010 DO - https://doi.org/10.1179/174650909X12603543809800 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 21 IS - 1 SP - 31 EP - 36 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-21178 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Woydt, Mathias A1 - Wäsche, Rolf T1 - The history of the Stribeck curve and ball bearing steels: The role of Adolf Martens N2 - The historical development on the discoveries of lubrication regimes for lubricated sliding contacts has been reviewed from the very beginning. It was found that the functional relationship between the coefficient of friction and the product of sliding speed and viscosity divided by the normal load well known as the Stribeck curve has been experimentally explored much earlier by Adolf Martens in 1888 long before Richard Stribeck did his pioneering measurements in 1902. However, basic work in this field of experimental hydrodynamics was done and results were published even earlier than that back in 1854 by Gustave A. Hirn, in 1879 by Robert H. Thurston and in 1883 by Beauchamp Tower. KW - Stribeck curve KW - Martens KW - Stribeck KW - Thurston KW - Gümbel KW - Hirn PY - 2010 DO - https://doi.org/10.1016/j.wear.2010.02.015 SN - 0043-1648 VL - 268 IS - 11-12 SP - 1542 EP - 1546 PB - Elsevier CY - Amsterdam AN - OPUS4-21180 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Cruzado, A. A1 - Hartelt, Manfred A1 - Wäsche, Rolf A1 - Urchegui, M.A. A1 - Gómez, X. T1 - Fretting wear of thin steel wires. Part 1: Influence of contact pressure N2 - Different fretting tests of thin steel wires under different conditions (loads, strokes, number of cycles and mean pressures) were performed. The wires used had 0.45 mm in diameter and the material was a cold-drawn eutectoid carbon steel (0.8% C) with a tensile strength over 2800 MPa. The tests were carried out with 90° "crossed cylinders" configuration varying the stroke, normal load and testing time (number of cycles). Afterwards the volumetric wear was obtained using surface profilometry with diamond stylus. With a classical study of the coefficient of wear with respect to the sliding distance, the results show that the wear coefficient increases with normal load and stroke, consequently, for the same sliding distance, the wear produced was higher when the load and/or stroke is increased. In this work, the coefficient of wear is decreasing continuously as the test is running. In order to analyze better the wear behaviour, another method, in which the volumetric wear is compared with respect to the Archard's loading factor, is proposed. As result of this method, two distinctive behaviours were detected; one corresponds to the running-in period with a more aggressive wear behaviour and the second one to the stable steady state period. In all the tests the running-in period was similar with regard to the wear rates but in the stable period the wear rates were increasing with higher loads or strokes. KW - Fretting KW - Wear KW - Wires KW - Contact pressure KW - Unlubricated tests PY - 2010 DO - https://doi.org/10.1016/j.wear.2010.02.017 SN - 0043-1648 VL - 268 IS - 11-12 SP - 1409 EP - 1416 PB - Elsevier CY - Amsterdam AN - OPUS4-21181 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hahn, Oliver T1 - Analyses of iron gall and carbon inks by means of X-ray fluorescence analysis: A non-destructive approach in the field of archaeometry and conservation science N2 - The qualitative and quantitative investigation of historical writing materials using micro-X-ray fluorescence analysis (micro-XRF) is a suitable method for obtaining information about the chemical composition of these materials. One the one hand these chemical composition fingerprints may answer some questions concerning the provenance of different materials, the chronology of their use, and give furthermore, the possibility to date unknown fragments in the lifework of an artist. On the other hand this method might be useful for the development and validation of conservation treatments. KW - XRF KW - Restoration and conservation science KW - Cultural heritage KW - Writing materials PY - 2010 DO - https://doi.org/10.1515/rest.2010.003 SN - 0034-5806 SN - 1865-8431 VL - 31 IS - 1 SP - 41 EP - 64 PB - Saur CY - München AN - OPUS4-21183 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Köppen, Robert A1 - Koch, Matthias A1 - Siegel, David A1 - Merkel, Stefan A1 - Maul, Ronald A1 - Nehls, Irene T1 - Determination of mycotoxins in foods: current state of analytical methods and limitations N2 - Mycotoxins are natural contaminants produced by a range of fungal species. Their common occurrence in food and feed poses a threat to the health of humans and animals. This threat is caused either by the direct contamination of agricultural commodities or by a "carry-over" of mycotoxins and their metabolites into animal tissues, milk, and eggs after feeding of contaminated hay or corn. As a consequence of their diverse chemical structures and varying physical properties, mycotoxins exhibit a wide range of biological effects. Individual mycotoxins can be genotoxic, mutagenic, carcinogenic, teratogenic, and oestrogenic. To protect consumer health and to reduce economic losses, surveillance and control of mycotoxins in food and feed has become a major objective for producers, regulatory authorities and researchers worldwide. However, the variety of chemical structures makes it impossible to use one single technique for mycotoxin analysis. Hence, a vast number of analytical methods has been developed and validated. The heterogeneity of food matrices combined with the demand for a fast, simultaneous and accurate determination of multiple mycotoxins creates enormous challenges for routine analysis. The most crucial issues will be discussed in this review. These are (1) the collection of representative samples, (2) the performance of classical and emerging analytical methods based on chromatographic or immunochemical techniques, (3) the validation of official methods for enforcement, and (4) the limitations and future prospects of the current methods. KW - Mycotoxins and fungal metabolites KW - Food KW - Rapid and validated methods KW - Regulations KW - Sampling KW - Multi-mycotoxin determination PY - 2010 DO - https://doi.org/10.1007/s00253-010-2535-1 SN - 0175-7598 VL - 86 IS - 6 SP - 1595 EP - 1612 PB - Springer CY - Berlin AN - OPUS4-21184 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Wolfgang T1 - ISO/TC 201 - Inhalte und Stand der Dinge T2 - DIN-Workshop: Chemische Oberflächenanalyse - Ist eine Vertretung deutscher Interessen in der Internationalen Normung notwendig? CY - Berlin, Germany DA - 2010-04-19 PY - 2010 AN - OPUS4-21185 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kannengießer, Thomas A1 - Kromm, Arne A1 - Gibmeier, J. A1 - Rethmeier, Michael T1 - In-situ-Analyse der Phasenumwandlungskinetik während des Schweißens N2 - Zugeigenspannungen, wie sie beim Schweißprozess durch inhomogene Temperaturverteilungen und Schrumpfungen hervorgerufen werden, können die Lebensdauer geschweißter Verbindungen signifikant herabsetzen. Eine neue und außerordentlich attraktive Methode, um Druckeigenspannungen bereits während des Schweißens gezielt einzustellen, gelingt mit sogenannten LTT (Low Transformation Temperature)-Legierungen. LTT-Legierungen weisen eine martensitische Phasenumwandlung bei relativ niedrigen Temperaturen auf, wobei die damit verbundene Volumenexpansion zu einer Reduktion der Schrumpfeigenspannungen bzw. Erzeugung von Druckeigenspannungen führt. Zum direkten Nachweis der Phasenumwandlungen und der damit verbundenen resultierenden Schweißeigenspannungen wurden erstmals In-situ-Schweißexperimente unter Nutzung hoch energetischer, polychromatischer Synchrotronstrahlung (Weißstrahl) realisiert, um die Umwandlungskinetik während eines realen Schweißprozesses und die daraus resultierenden Schweißeigenspannungen zu analysieren. Es wird gezeigt, dass mit LTT-Legierungen signifikante Druckeigenspannungen in der Schweißnaht erreicht werden. PY - 2010 SN - 0025-5300 VL - 52 IS - 4 SP - 204 EP - 210 PB - Hanser CY - München AN - OPUS4-21219 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Saiter, A. A1 - Delbreilh, L. A1 - Couderc, H. A1 - Arabeche, K. A1 - Schönhals, Andreas A1 - Saiter, J.-M. T1 - Temperature dependence of the characteristic length scale for glassy dynamics: Combination of dielectric and specific heat spectroscopy N2 - The temperature dependence of characteristic length scales associated to the glass transition such as the cooperativity length scale introduced by Adam and Gibbs [cooperative rearranging region (CRR)] or the dynamic heterogeneity as estimated from the four point correlation function X4, is at the center of large interests. Broadband dielectric spectroscopy and temperature modulated differential scanning calorimetry allow to study the CRR size temperature dependence in the temperature range of ergodicity loss for glass-forming liquids, starting from the onset of cooperativity in the crossover region down to the glass transition temperature. Furthermore, the correlation between these two techniques allows to explore a large frequency range (from 1 mHz to 10 MHz). The goal of this work is to follow the cooperativity evolution along the Arrhenius plot for two different polymeric systems: poly(ethylene 1,4-cyclohexylenedimethylene terephthalate glycol) and poly(bisphenol A carbonate). PY - 2010 DO - https://doi.org/10.1103/PhysRevE.81.041805 SN - 1539-3755 SN - 1063-651X VL - 81 IS - 4 SP - 041805-1 - 041805-8 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-21220 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ebell, Gino A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Auswirkungen des Einsatzes chromatreduzierter Zemente in Verbindung mit verzinktem Stahl T2 - GAV-Forschungskolloquium - Feuerverzinken - Korrosionsschutz zwischen Tradition und Moderne CY - Hannover, Deutschland DA - 2010-03-08 KW - Chromatreduzierter Zement KW - Verzinkter Betonstahl KW - Wasserstoff KW - Beton KW - Verbundzone PY - 2010 SP - 1 EP - 13 CY - Hannover AN - OPUS4-21221 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vollertsen, F. A1 - Grünenwald, S. A1 - Rethmeier, Michael A1 - Gumenyuk, Andrey A1 - Reisgen, U. A1 - Olschok, S. T1 - Welding thick steel plates with fibre lasers and GMAW N2 - The results of a collaborative research project on laser beam weldability of carbon steels of high sheet thickness are presented. That includes single and multiple pass welding of 16 mm and 20 mm thick plates, as well as the investigation of acceptable tolerances i.e. gap bridgeability and edge misalignment. For the welding experiments fibre lasers with 8 kW, 20 kW laser power and different GMAW-techniques were used in various applications. With the 20 kW fibre laser 16 mm plates could be welded with a single pass, 20 mm required a seam preparation or alternatively preheating of the material. For multi pass welding with 8 kW laser power a joint preparation with a single V-butt joint with a broad root face (Y-groove) was applied. The root pass was always welded with a hybrid process, the filler passes with a hybrid process as well as a GMAW process which produced the best results. KW - Arc welding KW - Carbon steels KW - Combined processes KW - Fibre lasers KW - Gas shielded arc welding KW - GMA welding KW - Multirun welding KW - Reference lists KW - Steels KW - Unalloyed steels PY - 2010 SN - 0043-2288 SN - 1878-6669 VL - 54 IS - 3/4 SP - R62 EP - R70 PB - Springer CY - Oxford AN - OPUS4-21224 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gumenyuk, Andrey A1 - Gook, Sergej A1 - Rethmeier, Michael A1 - Kohn, H. T1 - Orbitalschweißen im Pipelinebau - Neue Möglichkeiten durch die Anwendung von Hochleistungslasern T2 - 8. Internationale Konferenz Strahltechnik CY - Halle/Saale, Deutschland DA - 2010-04-14 KW - Laser-MSG-Hybrid Schweißen KW - Orbitalschweißen KW - Hochleistungslaser PY - 2010 SP - 74 EP - 79 CY - Halle (Saale) AN - OPUS4-21225 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Köppen, Robert A1 - Koch, Matthias A1 - Klein-Hartwig, Karin A1 - Nehls, Irene T1 - Herstellung eines Haferflocken-Referenzmaterials für die Mykotoxine T-2 und HT-2 T2 - Tag der Chemie 2010 (Freie Universität Berlin) CY - Berlin, Germany DA - 2010-06-16 PY - 2010 AN - OPUS4-21226 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Komann, Steffen A1 - Neumann, Martin A1 - Ballheimer, Viktor A1 - Wille, Frank A1 - Weber, Mike A1 - Droste, Bernhard A1 - Qiao, Linan T1 - Static and Dynamic Calculation Approaches for Mechanical Design Assessment of Type B Packages for Radioactive Material Transport T2 - Waste Management Conference 2010 CY - Phoenix, AZ, USA DA - 2010-03-07 PY - 2010 AN - OPUS4-21227 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Komann, Steffen A1 - Droste, Bernhard A1 - Wille, Frank T1 - Transport von Großkomponenten aus der Stilllegung kerntechnischer Anlagen - Erfahrungen bei der mechanischen Bewertung T2 - Jahrestagung Kerntechnik 2010 CY - Berlin, Germany DA - 2010-05-04 PY - 2010 AN - OPUS4-21228 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bonse, Jörn A1 - Sokolowski-Tinten, K. A1 - Barty, A. A1 - Boutet, S. A1 - Bogan, M. A1 - Marchesini, S. A1 - Hau-Riege, S. A1 - Stojanovic, N. A1 - Tobey, R. A1 - Ehrke, H. A1 - Cavalleri, A. A1 - Düsterer, S. A1 - Frank, M. A1 - Bajt, S. A1 - Schulz, J. A1 - Seibert, M. A1 - Hajdu, J. A1 - Treusch, R. A1 - Chapman, H. T1 - Short-pulse laser induced transient structure formation and ablation studied with time-resolved coherant XUV-scattering T2 - The International High Power Laser Ablation Conference CY - Santa Fe, NM, USA DA - 2010-04-18 PY - 2010 AN - OPUS4-21229 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bonse, Jörn A1 - Rosenfeld, A. A1 - Krüger, Jörg T1 - Femtosecond laser-inducted periodic surface structures: recent approaches to explain their subwavelength periodicties T2 - International Conference on Lasers, Applications, and Techonlogies, ICONO/LAT 2010, Symposium 2 der LAT 2010 "Laser-assisted Micro- and Nanotechnologies" CY - Kazan, Russia DA - 2010-08-23 PY - 2010 AN - OPUS4-21230 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Skrotzki, Birgit A1 - Schicker, Johannes A1 - Sievert, Rainer A1 - Fedelich, Bernard A1 - Noack, Hans-Dieter A1 - Kazak, A1 - Matzak, Kathrin A1 - Kühn, Hans-Joachim A1 - Klingelhöffer, Hellmuth T1 - TMF-Lebensdauerberechnung ATL-Heißteile T2 - FVV Frühjahrstagung 2010 CY - Bad Neuenahr, Germany DA - 2010-04-15 PY - 2010 AN - OPUS4-21232 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Takao, S. A1 - Takao, K. A1 - Kraus, Werner A1 - Scheinost, A.C. A1 - Hennig, C. T1 - First Hexanuclear U (IV) adn Th (IV) Formate Camplexes - Struture and Stability Range in Aqueous Solution T2 - 3rd EuCheMS Chemistry Congress CY - Nuremberg, Germany DA - 2010-08-29 PY - 2010 AN - OPUS4-21233 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stößer, R. A1 - Feist, M. A1 - Menzel, Michael A1 - Nofz, Marianne T1 - Fe3+ ions acting as probes and agents in aggregation processes and solid-state reactions in AlO(OH)/Al2O3 matrices N2 - The fate of doped iron species during various mechanically and thermally initiated redox reactions and aggregation processes in crystalline and amorphous AlO(OH) or Al2O3 matrices was investigated. The amorphization of the matrix was performed by chemical (i.e., via sol-gel processes) or mechanochemical treatment (high-energy ball milling). Thermal analysis, coupled with mass spectrometry (TA-MS), Mössbauer spectroscopy, and electron spin resonance (ESR), was used. The TA under various gas atmospheres allowed preparing samples under a controlled temperature regime, together with a controlled gas influence. Both the effect of mechanical activation and the influence of the iron doping could be followed macroscopically via the down-shift of the peak temperature of the corundum formation. The ESR data characterize the Fe3+ ions and their interaction with the magnetic surrounding based on the fine structure parameters. The Mössbauer data allowed the characterization of the Fe(0), Fe2+, and Fe3+ species, together with providing information about their coordinative surrounding. Both methods provided general complementary spectroscopical information. Unexpectedly, (FeOx)n and (FexAl1-x)2O3 aggregates could also be detected in the range of low Fe concentrations. It was demonstrated that even in the low-level doped systems [(FexAl1-x)2O3 with x ≥ 0.01], all the essential spectroscopic phenomena occur. At higher Fe concentrations, they were discovered to be caused by magnetic and spin exchange interactions as well as by solid-state reactions during and after the mechanical activation. PY - 2010 DO - https://doi.org/10.1111/j.1551-2916.2009.03596.x SN - 0002-7820 SN - 1551-2916 VL - 93 IS - 5 SP - 1447 EP - 1456 PB - Blackwell Publishing CY - Malden AN - OPUS4-21235 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst A1 - Fritsche, M. T1 - Measurement of Sheet Pile Length by Pile Integrity Testing and the Parallel Seismic Method T2 - Symposium on Engineering and Environmental Geophysics (SAGEEP) CY - Keystone, CO, USA DA - 2010-04-11 PY - 2010 AN - OPUS4-21166 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Puerto, D. A1 - Siegel, J. A1 - Gawelda, W. A1 - Galvan-Sosa, M. A1 - Ehrentraut, L. A1 - Bonse, Jörn A1 - Solis, J. T1 - Dynamics of plasma formation, relaxation, and topography modification induced by femtosecond laser pulses in crystalline and amorphous dielectrics N2 - We have studied plasma formation and relaxation dynamics along with the corresponding topography modifications in fused silica and sapphire induced by single femtosecond laser pulses (800 nm and 120 fs). These materials, representative of high bandgap amorphous and crystalline dielectrics, respectively, require nonlinear mechanisms to absorb the laser light. The study employed a femtosecond time-resolved microscopy technique that allows obtaining reflectivity and transmission images of the material surface at well-defined temporal delays after the arrival of the pump pulse which excites the dielectric material. The transient evolution of the free-electron plasma formed can be followed by combining the time-resolved optical data with a Drude model to estimate transient electron densities and skin depths. The temporal evolution of the optical properties is very similar in both materials within the first few hundred picoseconds, including the formation of a high reflectivity ring at about 7 ps. In contrast, at longer delays (100 ps–20 ns) the behavior of both materials differs significantly, revealing a longer lasting ablation process in sapphire. Moreover, transient images of sapphire show a concentric ring pattern surrounding the ablation crater, which is not observed in fused silica. We attribute this phenomenon to optical diffraction at a transient elevation of the ejected molten material at the crater border. On the other hand, the final topography of the ablation crater is radically different for each material. While in fused silica a relatively smooth crater with two distinct regimes is observed, sapphire shows much steeper crater walls, surrounded by a weak depression along with cracks in the material surface. These differences are explained in terms of the most relevant thermal and mechanical properties of the material. Despite these differences the maximum crater depth is comparable in both material at the highest fluences used (16J/cm2). The evolution of the crater depth as a function of fluence can be described taking into account the individual bandgap of each material. KW - Femtosecond laser ablation KW - Plasma formation KW - Time-resolved microscopy KW - Dielectrics KW - Fused silica KW - Sapphire KW - Scanning force microscopy KW - Reflectivity measurements KW - Transmission measurements KW - Drude model PY - 2010 DO - https://doi.org/10.1364/JOSAB.27.001065 SN - 0740-3224 SN - 1520-8540 VL - 27 IS - 5 SP - 1065 EP - 1076 PB - Optical Society of America CY - Washington, DC AN - OPUS4-21167 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Philipp, Rosemarie A1 - Hein, Sebastian A1 - Duewer, D.L. T1 - Comparison of Value-Assigned CRMs and PT MAterials for Ethanol in Aqeous Matrix T2 - CCQM Organic Analysis Working Group Meeting CY - Paris, France DA - 2010-04-13 PY - 2010 AN - OPUS4-21168 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schwenk, Christopher T1 - Strukturierte Vorgehensweise zur Simulation schweißbedingter Verzüge und Eigenspannungen T2 - INS-Vortragsforum Hannover-Messe 2010 (Präsentation zum abgeschlossenen INS-Vorhaben) CY - Hanover, Germany DA - 2010-04-20 PY - 2010 AN - OPUS4-21169 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hodoroaba, Vasile-Dan T1 - A joint NIST/BAM Pilot Study for EPMA (WD & ED) - A Proposal T2 - "Surface Analysis Working Group" (SAWG) Meeting, CCQM CY - Paris, France DA - 2010-04-14 PY - 2010 AN - OPUS4-21170 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Körner, Ursula T1 - Überarbeitung von Unterlagen für die Durchführung von Audits und zur Qualitätssicherung T2 - Informationsaustausch Qualitätssicherung und Überwachung bei der Herstellung von Gefahrgutverpackungen - AK Pappe/Papier/Holz CY - Berlin, Germany DA - 2010-04-21 PY - 2010 AN - OPUS4-21171 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brauser, Stephan A1 - Kannengießer, Thomas T1 - Hydrogen absorption of different welded duplex steels N2 - In this study, hydrogen absorption and storage was investigated for various high-alloyed ferritic-austenitic duplex stainless steels. On account of the specific transformation and solidification behaviour, respectively, of duplex stainless steels as compared to single-phase ferritic and austenitic steels, special conditions have to be considered concerning hydrogen absorption which may ultimately lead to microstructure-dependent hydrogen-assisted weld metal cracking. Hydrogen absorption during welding may occur via the shielding gas, moisture from the surroundings or via the welding filler material. As a contribution to the interpretation and prediction of hydrogen-induced cracking in welded duplex stainless steels, the actual hydrogen absorption via the arc as well as the weld metal hydrogen diffusion was investigated in a duplex stainless steel DSS (1.4462) and in a lean-duplex stainless steel LDS (1.4162). Isothermal heat treatment using carrier gas hot extraction enabled quantification of the amounts of hydrogen trapped in the respective microstructures. The total hydrogen concentrations were found to be nearly identical. Trapped hydrogen was however observed to be dependent on the material and on the microstructure condition. The influence of hydrogen on the mechanical properties of the weld metal was characterized with the help of tensile tests. In addition, hydrogen embrittlement was detected in scanning electron microscopic analyses. KW - Duplex stainless steel KW - Lean-duplex stainless steel KW - Hydrogen absorption KW - Hydrogen trapping KW - Hydrogen embrittlement PY - 2010 DO - https://doi.org/10.1016/j.ijhydene.2010.01.148 SN - 0360-3199 VL - 35 IS - 9 SP - 4368 EP - 4374 PB - Elsevier CY - Oxford AN - OPUS4-21172 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wilrich, Cordula T1 - How are physical hazard classifications affected by the implementation of the GHS? T2 - 2nd International Fresenius Conference Implementing the GHS CY - Cologne, Germany DA - 2010-04-26 PY - 2010 AN - OPUS4-21173 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Acikalin, Hatice Aydan T1 - Ganzheitliche Risikobetrachtung im Rahmen einer Quantitativen Risikoanalyse T2 - ProcessNet-Arbeitsausschuss "Risikomanagement" CY - Frankfurt am Main, Germany DA - 2010-04-15 PY - 2010 AN - OPUS4-21174 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Poli, Marco A1 - Grätz, Rainer A1 - Schröder, Volkmar T1 - Anwendbarkeit der Gasexplosionskonstante Kg bei der Druckentlastung T2 - ProcessNet Arbeitsausschuss "Sicherheitstechnische Kenngrößen" CY - Frankfurt am Main, Germany DA - 2010-04-13 PY - 2010 AN - OPUS4-21175 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Wolfgang T1 - Surface Analysis Working Group: Report for 2009/10 T2 - CCQM Plenary Meeting, BIPM CY - Sèvres, France DA - 2010-04-15 PY - 2010 AN - OPUS4-21186 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunewald, Thomas T1 - Regelwerk des nichtelektrischen Explosionsschutzes - von der EU-Richtlinie zur Produktnorm T2 - Seminar "Zündgefahren durch Funken - Maßnahmen zum Explosionsschutz" Haus der Technik, Veranstaltungs-Nr.: E-H050-05-408-0 CY - Essen, Germany DA - 2010-05-18 PY - 2010 AN - OPUS4-21188 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunewald, Thomas T1 - Zündgefahr durch mechanisch erzeugte Funken? T2 - Seminar "Zündgefahr durch Funken - Maßnahmen zum Explosionsschutz" Haus der Technik, Veranstaltungs-Nr.: E-H050-05-408-0 CY - Essen, Germany DA - 2010-05-18 PY - 2010 AN - OPUS4-21189 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bäßler, Ralph A1 - Sarmiento Klapper, Helmuth A1 - Burkert, Andreas T1 - Alternative, nachhaltige Energiekonzepte - Herausforderungen für Werkstoffe zum Einsatz in Geothermieanlagen T2 - 3-Länder-Korrosionstagung - Nichtrostende Stähle - Spezielle Anwendungen und angepasste Lösungen CY - Berlin, Deutschland DA - 2010-04-19 KW - Hochlegierter Stahl KW - Geothermie KW - Örtliche Korrosion KW - Klassische Auslagerung KW - Elektrochemie PY - 2010 SN - 978-3-935406-40-6 SP - 1 EP - 10(?) PB - DECHEMA AN - OPUS4-21190 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Ulrich A1 - Schmidt, Martin T1 - Brandgefahren bei Recyclinglagern T2 - VdS-Fachtagung "Die Ermittlung von Brand- und Explosionsursachen (5)" CY - Cologne, Germany DA - 2010-04-28 PY - 2010 AN - OPUS4-21191 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Ulrich T1 - Fires in silos - Prevention of self-ignition during storage of bulk materials T2 - INDEX Safety Congress 2010 CY - Nuremberg, Germany DA - 2010-04-26 PY - 2010 AN - OPUS4-21192 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hertel, Horst T1 - DIN 68800-3, Vorbeugender Schutz von Holz mit Holzschutzmitteln T2 - 26. Holzschutz-Tagung, Georg-August-Universität Göttingen CY - Göttingen, Germany DA - 2010-04-22 PY - 2010 AN - OPUS4-21193 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hertel, Horst T1 - Anfälligkeit von Holz nach unterschiedlicher Vorbehandlung gegenüber dem Hausbockkäfer T2 - 26. Holzschutz-Tagung, Georg-August-Universität Göttingen CY - Göttingen, Germany DA - 2010-04-22 PY - 2010 AN - OPUS4-21194 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eichler, Thorsten A1 - Isecke, Bernd T1 - Untersuchungen zu den sekundären Schutzmechanismen beim kathodischen Korrosionsschutz von Stahl in Beton T2 - Doktorandensymposium 2010 des DAfStb CY - Kaiserslautern, Germany DA - 2010-11-11 PY - 2010 AN - OPUS4-21236 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thater, Raphael A1 - Schwenk, Christopher A1 - Rethmeier, Michael T1 - Fallstudie zur Anwendung der Schweißsimulation in der Automobilindustrie T2 - DVS Lindengarten CY - Berlin, Germany DA - 2010-04-28 PY - 2010 AN - OPUS4-21237 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Rabin, Ira A1 - Hahn, Oliver A1 - Wolff, Timo A1 - Kindzorra, Emanuel A1 - Masic, A. A1 - Schade, U. A1 - Weinberg, G. ED - Dik, J. ED - Gunneweg, J. ED - Adriaens, A. T1 - Characterization of the writing media of the Dead Sea scrolls KW - Dead Sea scrolls KW - Parchment KW - Carbon ink KW - XRF KW - FTIR KW - SEM PY - 2010 SN - 978 90 04 18152 6 SN - 0169-9962 IS - Chapter 9 SP - 123 EP - 134 PB - Brill CY - Leiden, The Netherlands AN - OPUS4-21238 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Komann, Steffen A1 - Droste, Bernhard A1 - Wille, Frank T1 - Transport von Großkomponenten aus der Stilllegung kerntechnischer Anlagen - Erfahrungen bei der mechanischen Bewertung T2 - Jahrestagung Kerntechnik 2010 CY - Berlin, Deutschland DA - 2010-05-04 KW - Kerntechnische Anlagen KW - Rückbau KW - Mechanische Bewertung KW - Großkomponenten KW - Numerische Analyse PY - 2010 IS - Sektion 7 / 706 SP - 1 EP - 5 CY - Berlin AN - OPUS4-21239 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Komann, Steffen A1 - Neumann, Martin A1 - Ballheimer, Viktor A1 - Wille, Frank A1 - Weber, Mike A1 - Qiao, Linan A1 - Droste, Bernhard T1 - Static and dynamic calculation approaches for mechanical design assessment of type B packages for radioactive material transport - 10193 T2 - WM2010 Conference CY - Phoenix, Arizona, USA DA - 2010-03-07 KW - Mechanische Bewertung KW - Radioaktives Material KW - Numerische Analyse KW - Typ B(U)-Verpackung PY - 2010 SP - 1 EP - 9 AN - OPUS4-21240 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank A1 - Droste, Bernhard A1 - Zencker, Uwe A1 - Komann, Steffen T1 - Reflektion der verkehrsrechtlichen Bauartprüfung des CASTOR HAW 28M aus Sicht der zuständigen Behörde BAM T2 - Jahrestagung Kerntechnik 2010 CY - Berlin, Deutschland DA - 2010-05-04 KW - Bauartprüfung KW - Fallprüfungen KW - Transportbehälter KW - FEM PY - 2010 SP - 1 EP - 5 CY - Berlin AN - OPUS4-21241 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Burkert, Andreas A1 - Lehmann, Jens A1 - Burkert, Annette A1 - Mietz, Jürgen T1 - Korrosionsschäden an nichtrostenden Stählen unter atmosphärischen Einsatzbedingungen N2 - Neben konstruktiven Anforderungen werden an nichtrostende Stähle im Bauwesen häufig hohe optische Ansprüche gestellt. Unerwartete Beeinträchtigungen des optischen Erscheinungsbildes nichtrostender Stähle unter wenig korrosiven Bedingungen sind in der Zwischenzeit ein weit verbreitetes Problemfeld und Gegenstand zahlreicher Streitfälle. Vielfach wird die Vermutung geäußert, dass eine veränderte Legierungszusammensetzung, veränderte Umweltbedingungen oder auch die unsachgemäße Verarbeitung die Ursache für diese Erscheinungen sind. Durch eine systematische Untersuchung zahlreicher Schadensfälle an Stabmaterial in den vergangenen zwei Jahren im Rahmen eines Forschungsvorhabens konnte gezeigt werden, dass die Ursachen in bekannten Werkstofffehlern zu finden sind. Hierzu gehören chemische Inhomogenitäten, wie zum Beispiel Ausscheidungen und örtliche Aufkohlung, sowie geometrische Fehler, wie zum Beispiel Hinterschnitte, Walzfehler und Schalenbildung. Die Fehler konnten damit eindeutig als Herstellungsfehler der jeweiligen Halbzeuge identifiziert werden. KW - Korrosion KW - Nichtrostende Stähle KW - Atmosphäre KW - Interkristalline Korrosion KW - Schäden PY - 2010 DO - https://doi.org/10.1002/stab.201001288 SN - 0038-9145 SN - 1437-1049 SN - 0932-6375 VL - 79 IS - 5 SP - 389 EP - 395 PB - Ernst CY - Berlin AN - OPUS4-21242 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beckmann, Jörg A1 - von Chrzanowski, Lars A1 - Ewers, Benjamin A1 - Ewert, Uwe T1 - Time of Flight Diffraction-Technik (ToFD) mit THz-Strahlung zur Untersuchung von Kunststoffobjekten T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21245 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Manier, Charles-Alix A1 - Theiler, Geraldine A1 - Spaltmann, Dirk A1 - Woydt, Mathias A1 - Ziegele, H. T1 - Benchmark of thin film coatings for lubricated slip-rolling contacts N2 - The light-weight approach and fuel economy targets in today's automotive engineering require tribosystems, which can withstand higher contact pressures associated with low coefficients of friction. The application of high-performance coatings represents one approach among others. This paper presents some recently developed DLC coatings (a-C:H and ta-C) as well as a novel coating-substrate system (Zr(C,N)) in a benchmark test procedure under slip-rolling conditions in the presence of liquid lubricants. Various coatings with different thickness, interlayer and substrates were evaluated for their slip-rolling resistance in different lubricants at ambient temperature and at 120 °C. Results indicate that some of these coating systems can withstand at least 10 million cycles under initial Hertzian contact pressures of up to Pmax = 3.500 MPa and oil temperatures of at least 120 °C associated with low coefficients of friction under mixed/boundary conditions. Surface of the coatings and the counter bodies were analysed and compared with untreated substrates. KW - Slip-rolling KW - DLC KW - Thin film coating KW - Zr(C,N) KW - Polyglycol PY - 2010 DO - https://doi.org/10.1016/j.wear.2010.02.020 SN - 0043-1648 VL - 268 IS - 11-12 SP - 1442 EP - 1454 PB - Elsevier CY - Amsterdam AN - OPUS4-21196 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias ED - Czichos, Horst ED - Habig, K.-H. T1 - Hochtemperaturtribologie KW - Ingenieurkeramik KW - Triboaktive Werkstoffe KW - (Ti,Mo)(C,N) KW - Tin-2Cr2O2n-1 KW - Magnéliphasen KW - Hochtemperatur KW - Tribologie KW - SiC KW - Al2O3 KW - ZrO2 KW - Si3N4 PY - 2010 SN - 978-3-8348-1810-2 SP - 611 EP - 623 PB - Springer-Vieweg CY - Wiesbaden ET - 3. Auflage / 2010 AN - OPUS4-21197 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scharf, Oliver A1 - Bjeoumikhova, S. A1 - Soltau, H. T1 - First images of a colour X-ray camera, a detector with high resolution in energy and space T2 - European Conference on X-ray Spectrometry CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-21199 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunewald, C. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich T1 - SRXRF-measurements at non planar objects: Automatic determination of the angle of incidence of the exciting X-ray T2 - European Conference on X-ray Spectrometry CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-21202 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaunich, Matthias A1 - Stark, Wolfgang A1 - Wolff, Dietmar T1 - Low temperature properties of rubber seals T2 - 9. Rubber Fall Colloquium CY - Hanover, Germany DA - 2010-11-03 PY - 2010 AN - OPUS4-21207 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaunich, Matthias A1 - Stark, Wolfgang A1 - Wolff, Dietmar T1 - Elastomerprüfung in der Kälte, DVR und Glasübergang T2 - Treffen der Deutschen Kautschukgesellschaft e. V. Bezirksgruppe Ost CY - Berlin, Germany DA - 2010-05-27 PY - 2010 AN - OPUS4-21208 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bartscher, M. A1 - Neukamm, M. A1 - Koch, M. A1 - Neuschaefer-Rube, Ulrich A1 - Staude, Andreas A1 - Goebbels, Jürgen A1 - Ehrig, Karsten T1 - Performance assesment of geometry measurements with micor-CT using a dismountable work-piece-near reference standard T2 - ECNDT 2010 CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-21210 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pepke, Lutz-Alexander A1 - Brauser, Stephan A1 - Weber, Gert A1 - Rethmeier, Michael T1 - Influence of Different Force Generation Systems on Weld Properties of Resistance Spot Welded Modern Steels for Car Body Production T2 - Fügen im Karosseriebau CY - Bad Nauheim, Germany DA - 2010-04-21 PY - 2010 AN - OPUS4-21211 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Brauser, Stephan A1 - Pepke, Lutz-Alexander A1 - Weber, Gert A1 - Rethmeier, Michael T1 - Influence of production-related gaps on strength properties and deformation behaviour of spot welded TRIP Steel HCT690T T2 - Intermediate Meeting IIW SC Auto, Inpro CY - Berlin, Germany DA - 2010-04-22 PY - 2010 AN - OPUS4-21212 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schwenk, Christopher A1 - Heinze, Christoph A1 - Rethmeier, Michael T1 - Optimierung von Verzug und Eigenspannungen beim Schweißen dickwandiger Bauteile T2 - Kolloquium "Schweißbedingter Verzug - Möglichkeiten der Vorausberechnung" Präsentation zu AiF Vorhaben IG 15746 N CY - Braunschweig, Germany DA - 2010-04-22 PY - 2010 AN - OPUS4-21213 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Isecke, Bernd T1 - Korrosionsschutz technischer Anlagen und Geräte T2 - Seminar "Farbe und Lacke" CY - Krefeld, Germany DA - 2010-04-27 PY - 2010 AN - OPUS4-21156 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Isecke, Bernd T1 - Grundlagen und Anwendungen des kathodischen Korrosionsschutzes T2 - Fachseminar Korrosion- und Korrosionsschutz CY - Frankfurt am Main, Germany DA - 2010-03-12 PY - 2010 AN - OPUS4-21157 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Isecke, Bernd T1 - Korrosionsprüfungen an Beschichtungen T2 - Seminar "Farbe und Lack" CY - Krefeld, Germany DA - 2010-04-27 PY - 2010 AN - OPUS4-21158 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Roos, P. H. A1 - Jakubowski, Norbert A1 - Wäntig, L. T1 - Five in one sweep: Multiparameter analysis of microsomal CYP-profiles by means of laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) T2 - Jahrestagung der Deutschen Gesellschaft für Experimentelle und Klinische Pharmakologie und Toxikologie CY - Mainz, Germany DA - 2010-03-23 PY - 2010 AN - OPUS4-21160 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jakubowski, Norbert T1 - Heritage of Prof. Dr. Ing. Klaus Gustav Heumann: Selected Highlights T2 - 2010 Winter Conference CY - Fort Myers, FL, USA DA - 2010-01-04 PY - 2010 AN - OPUS4-21161 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Richter, Silke A1 - Recknagel, Sebastian A1 - Jakubowski, Norbert T1 - Einsatz direkter Festprobentechniken zur Charakterisierung von Sonderwerkstoffen an der BAM T2 - Anwendertreffen. Atomspektrometrie mit Plasmen CY - Hamburg, Germany DA - 2010-02-08 PY - 2010 AN - OPUS4-21163 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lohrer, Christian A1 - Stattaus, Kim A1 - Kurth, Lutz A1 - Dutschke, Andreas A1 - Kästorf, Nadine T1 - Impacts of various conditionings on performance parameters of categroy 4 fireworks shells T2 - 12th International Symposium on Fireworks CY - Oporto, Portugal DA - 2010-10-11 PY - 2010 AN - OPUS4-22136 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lohrer, Christian T1 - STANDARDISATION OF FIREWORKS - QUO VADIS? T2 - 12the International Symposium on Fireworks CY - Oporto, Portugal DA - 2010-10-11 PY - 2010 AN - OPUS4-22137 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trappe, Volker A1 - Günzel, Stephan A1 - Jaunich, Matthias T1 - Correlation between crack propagation rate and cure process of epoxy resins T2 - International Conference on Fatigue of Composites (ICFC 5) CY - Nanjing, China DA - 2010-10-16 PY - 2010 AN - OPUS4-22139 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Ulrich T1 - Callenges of sustainable construction with respect to fire safety T2 - FORUM Workshop on the Role of Fire Safety in Achieving Sustainable Buildings and Communities CY - Espoo, Finland DA - 2010-08-25 PY - 2010 AN - OPUS4-22141 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Wachtendorf, Volker T1 - Polypropylene Life Time Estimation by Developing Dose Response Functions with Respect to Irradiation and Temperature - ViPQuali Project T2 - 8th International Symposium on Weatherability CY - Tokyo, Japan DA - 2010-10-14 PY - 2010 AN - OPUS4-22142 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Alterungsvorgänge bei Kunststoffbehältern T2 - BAM-AK Prüfstellen CY - Berlin, Germany DA - 2010-09-22 PY - 2010 AN - OPUS4-22143 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jann, Oliver T1 - Emissions from Sealants T2 - Fraunhofer European Symposium: Emissions of Regulated Dangerous Substances from Building Products CY - Hanover, Germany DA - 2010-03-16 PY - 2010 AN - OPUS4-22144 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jann, Oliver T1 - Innenraumluftschadstoffe - Emissionsarme Materialien und Produkte T2 - Kolloquium "Messen und Beurteilen von Luftschadstoffen", TU Berlin CY - Berlin, Germany DA - 2010-07-02 PY - 2010 AN - OPUS4-22145 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klinger, Christian A1 - Häcker, Ralf A1 - Bettge, Dirk A1 - Heckel, Thomas A1 - Gohlke, Dirk A1 - Klingbeil, Dietmar T1 - Werkstoffuntersuchungen zur Schadensanalyse "Radsatzwellenbruch ICE3" T2 - DVM-Tag Bauteilsicherheit CY - Berlin, Germany DA - 2010-05-29 PY - 2010 AN - OPUS4-22117 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klinger, Christian A1 - Häcker, Ralf A1 - Bettge, Dirk A1 - Heckel, Thomas A1 - Gohlke, Dirk T1 - Schadensanalyse an Eisenbahnkomponenten T2 - DGZfP, 6. Fachtagung Zersörungsfreie Prüfung im Eisenbahnwesen CY - Wittenberge, Germany DA - 2010-03-16 PY - 2010 AN - OPUS4-22118 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schurig, Michael T1 - Modellierung des Vertex-Effektes in der Metallplastizität T2 - AK Stoffgesetze/Forum Metallplastizität, BAM CY - Berlin, Germany DA - 2010-10-08 PY - 2010 AN - OPUS4-22119 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schalau, Bernd A1 - Grätz, Rainer T1 - Vergleich von Freistrahlmodellen N2 - Bei Anlagen, in denen mit brennbaren oder toxischen Gasen unter Druck umgegangen wird, tritt bei einem Versagen der Umschließung oder beim Ansprechen von Druckentlastungseinrichtungen ein Freistrahl aus. Mit entsprechenden Modellen können, z. B. für das Explosionsschutzkonzept, die untere und obere Explosionsgrenze des Freistrahls berechnet werden. Bei der Freisetzung eines toxischen Gases ist die Überhöhung des Freistrahls als Eingabeparameter für die anschließende Berechnung der impulsfreien Gasausbreitung relevant. Aus der Literatur sind einige empirische Modelle bekannt, die unter bestimmten Randbedingen mit geringem Rechenaufwand einsetzbar sind. Weit verbreitet sind die Integralmodelle, die in bekannten Programmpaketen für Auswirkungsbetrachtungen enthalten sind. Der Vergleich verschiedener Freistrahlmodelle mit experimentellen Untersuchungen soll eine Bewertung der Berechnungsergebnisse ermöglichen und dient gleichzeitig als Grundlage für die Weiterentwicklung eines Integralmodells. KW - Störfallauswirkungsbetrachtungen PY - 2010 SN - 1434-9728 SN - 1436-4948 SN - 0372-2457 SN - 0376-1185 VL - 51 IS - 10 SP - 29 EP - 35 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-22120 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rack, A. A1 - Rack, T. A1 - Stiller, M. A1 - Riesemeier, Heinrich A1 - Zabler, S. A1 - Nelson, K. T1 - In vitro synchrotron-based radiography of micro-gap formation at the implant-abutment interface of two-piece dental implants N2 - Micro-gap formation at the implant-abutment interface of two-piece dental implants was investigated in vitro using high-resolution radiography in combination with hard X-ray synchrotron radiation. Images were taken with the specimen under different mechanical loads of up to 100 N. The aim of this investigation was to prove the existence of micro-gaps for implants with conical connections as well as to study the mechanical behavior of the mating zone of conical implants during loading. Synchrotron-based radiography in comparison with classical laboratory radiography yields high spatial resolution in combination with high contrast even when exploiting micro-sized features in highly attenuating objects. The first illustration of a micro-gap which was previously indistinguishable by laboratory methods underlines that the complex micro-mechanical behavior of implants requires further in vitro investigations where synchrotron-based micro-imaging is one of the prerequisites. KW - X-ray imaging KW - Dental implants KW - Digital radiography KW - Implant-abutment interface PY - 2010 DO - https://doi.org/10.1107/S0909049510001834 SN - 0909-0495 SN - 1600-5775 VL - 17 IS - 2 SP - 289 EP - 294 PB - Blackwell Publishing CY - Oxford AN - OPUS4-22121 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mechler, S. A1 - Schumacher, G. A1 - Koteski, V. A1 - Riesemeier, Heinrich A1 - Schäfers, F. A1 - Mahnke, H.-E. T1 - Local structure and site substitution in amorphous and quasicrystalline Zr-Ti-Ni-(Cu) alloys N2 - Local structures of amorphous and quasicrystalline phases in Zr–Ti–Ni and Zr–Ti–Ni–Cu alloys have been studied by means of x-ray absorption spectroscopy. The amorphous phases show a high degree of icosahedral short-range order. In all investigated systems local order around Cu and Ni atoms was found to be nearly identical pointing to site substitution of Ni by Cu as the reason for an improved glass forming ability when Ni is partly substituted by Cu. The results strengthen an icosahedral cluster based approach for the structure of metallic glasses and indicate the importance of the medium-range order on glass formation. KW - Copper alloys KW - Frustration KW - Glass structure KW - Metallic glasses KW - X-ray absorption spectra PY - 2010 DO - https://doi.org/10.1063/1.3467265 SN - 0003-6951 SN - 1077-3118 VL - 97 IS - 4 SP - 041914-1 - 041914-3 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-22122 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zehbe, R. A1 - Haibel, A. A1 - Riesemeier, Heinrich A1 - Gross, U. A1 - Kirkpatrick, C.J. A1 - Schubert, H. A1 - Brochhausen, C. T1 - Going beyond histology. Synchrotron micro-computed tomography as a methodology for biological tissue characterization: from tissue morphology to individual cells N2 - Current light microscopic methods such as serial sectioning, confocal microscopy or multiphoton microscopy are severely limited in their ability to analyse rather opaque biological structures in three dimensions, while electron optical methods offer either a good three-dimensional topographic visualization (scanning electron microscopy) or high-resolution imaging of very thin samples (transmission electron microscopy). However, sample preparation commonly results in a significant alteration and the destruction of the three-dimensional integrity of the specimen. Depending on the selected photon energy, the interaction between X-rays and biological matter provides semi-transparency of the specimen, allowing penetration of even large specimens. Based on the projection-slice theorem, angular projections can be used for tomographic imaging. This method is well developed in medical and materials science for structure sizes down to several micrometres and is considered as being non-destructive. Achieving a spatial and structural resolution that is sufficient for the imaging of cells inside biological tissues is difficult due to several experimental conditions. A major problem that cannot be resolved with conventional X-ray sources are the low differences in density and absorption contrast of cells and the surrounding tissue. Therefore, X-ray monochromatization coupled with a sufficiently high photon flux and coherent beam properties are key requirements and currently only possible with synchrotron-produced X-rays. In this study, we report on the three-dimensional morphological characterization of articular cartilage using synchrotron-generated X-rays demonstrating the spatial distribution of single cells inside the tissue and their quantification, while comparing our findings to conventional histological techniques. KW - Cartilage KW - Chondrocyte KW - Synchrotron micro-computed tomography KW - Histology KW - Scanning electron microscopy KW - Three-dimensional imaging PY - 2010 DO - https://doi.org/10.1098/rsif.2008.0539 SN - 1742-5689 SN - 1742-5662 VL - 7 SP - 49 EP - 59 PB - The Royal Society CY - London AN - OPUS4-22123 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Auersch, Lutz A1 - Said, Samir T1 - Attenuation of ground vibrations due to different technical sources N2 - The attenuation of technically induced surface waves is studied theoretically and experimentally. In this paper, nineteen measurements of ground vibrations induced by eight different technical sources including road and rail traffic, vibratory and impulsive construction work or pile driving, explosions, hammer impulses and mass drops are described, and it is shown that the technically induced ground vibrations exhibit a power-law attenuation ν ~ r -q where the exponents q are in the range of 0.5 to 2.0 and depend on the source types. Comparisons performed demonstrate that the measured exponents are considerably higher than theoretically expected. Some potential effects on ground vibration attenuation are theoretically analyzed. The most important effect is due to the material or scattering damping. Each frequency component is attenuated exponentially as exp(-kr), but for a broad-band excitation, the sum of the exponential laws also yields a power law but with a high exponent. Additional effects are discussed, for example the dispersion of the Rayleigh wave due to soil layering, which yields an additional exponent of 0.5 in cases of impulsive loading. KW - Wave attenuation KW - Environmental vibrations KW - Field tests KW - Material damping KW - Scattering damping KW - Rayleigh wave PY - 2010 DO - https://doi.org/10.1007/s11803-010-0018-0 SN - 1671-3664 VL - 9 IS - 3 SP - 337 EP - 344 PB - Science Press CY - Beijing, China AN - OPUS4-22124 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schloesser, J. A1 - Bäker, M. A1 - Rösler, J. A1 - Pulz, Robert T1 - Oxidation behavior of thermal barrier coatings on copper substrates N2 - In rocket engine combustion chambers, the cooling channels experience extremly high temperatures and environmental attack. Thermal protection can be provided by Thermal Barrier Coatings. Due to the need of good heat conduction, the inner combustion liner is made of copper. The performance of a standard coating system for nickel based substrates is investigated on copper substrates. Thermal cycling experiments are performed on the coated samples. Due to temperature limitations of the copper substrate material, no thermally grown oxide forms at the interface of the thermal barrier coating and the bond coat. Delamination of the coatings occurs at the interface between the substrate and the bond coat due to oxide formation of the copper at uncoated edges. In real service a totally dense coating can probably not be assured which is the reason why this failure mode is of importance. Different parameters are used for thermal cycling to understand the underlying mechanisms of delamination. Furthermore, laser heating experiments account for the high thermal gradient in real service. Pilot tests which led to a delamination of the coating at the substrate interface were performed successfully. KW - Thermal barrier coating KW - Copper substrate KW - Rocket engine KW - Oxidation protection PY - 2010 DO - https://doi.org/10.4028/www.scientific.net/AST.66.74 SN - 1662-0356 VL - 66 SP - 74 EP - 79 PB - Techna CY - Faenza AN - OPUS4-22125 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wilrich, Cordula A1 - van Dam, L. T1 - Transition of the PED to CLP-format T2 - EU - DG Enterprise: Working Party Guidelines CY - Brussels, Belgium DA - 2010-10-06 PY - 2010 AN - OPUS4-22056 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bartholmai, Matthias A1 - Köppe, Enrico T1 - Bauwerke unter Beobachtung. Funkbasiertes Sensornetzwerk zur Schadensfrüherkennung an Bauwerken T2 - Hannover-Messe CY - Hanover, Germany DA - 2010-04-19 PY - 2010 AN - OPUS4-22058 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Nöther, Nils A1 - Wendt, Mario A1 - Wosniok, Aleksander T1 - Distributed fiber optic sensors embedded in technical textiles for structural health monitoring T2 - 4th European Workshop on Optical Fibre Sensors (EWOFS) CY - Oporto, Portugal DA - 2010-09-08 PY - 2010 AN - OPUS4-22059 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Witt, Jens A1 - Narbonneau, F. A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - Jonckheere, J. de A1 - Jeanne, M. A1 - Kinet, D. A1 - Paquet, A. A1 - Depré, A. A1 - D'Angelo, L.T. A1 - Logier, R. T1 - Smart medical textiles with embedded optical fibre sensors for continuous monitoring of respiratory movements during MRI N2 - We report on three respiration sensors based on pure optical technologies developed during the FP6 EU project OFSETH. The developed smart medical textiles can sense elongation up to 3%, while maintaining the stretching properties of the textile substrates for a good comfort of the patient. The sensors, based on silica and polymer fibre, are developed for monitoring of patients during MRI examination. The OFSETH harness allows a continuous measurement of respiration movements while all vitals organs are free for medical staff actions. The sensors were tested in MRI environment and on healthy adults. T2 - 4th European Workshop on Optical Fibre Sensors (EWOFS) CY - Oporto, Portugal DA - 08.09.2010 PY - 2010 AN - OPUS4-22061 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gründer, Klaus-Peter T1 - Einsatz optischer 3D-Messtechniken für Verformungsmessungen an RAM-Behältern bei Fallprüfungen T2 - Gefahrgutkonferenz, 2. RAM-Behältersicherheitstage 2010 CY - Berlin, Germany DA - 2010-03-18 PY - 2010 AN - OPUS4-22062 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Köppe, Enrico A1 - Kadoke, Daniel A1 - Schlüter, Vivien T1 - Strukturmonitoring am Beispiel von Flugzeugen mit Messverfahren der Fachgruppe "Mess- und Prüftechnik; Sensorik" T2 - Hannover-Messe CY - Hanover, Germany DA - 2010-04-19 PY - 2010 AN - OPUS4-22063 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lohrer, Christian A1 - Kurth, Lutz A1 - Dutschke, Andreas A1 - Lutze, Romy T1 - Emission studies of theatrical pyrotechnic articles under defined boundray conditions T2 - 12th International Symposium on Fireworks CY - Oporto, Portugal DA - 2010-10-11 PY - 2010 AN - OPUS4-22065 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. A1 - Bartholmai, Matthias T1 - Mikrodrohne zur Gasmessung in Gefahrenszenarien T2 - Mobile Sensorik, dritter TSB Elevator Pitch Technology Day CY - Berlin, Germany DA - 2010-03-18 PY - 2010 AN - OPUS4-22067 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hentschel, Manfred P. A1 - Lange, Axel A1 - Kupsch, Andreas A1 - Müller, Bernd R. T1 - Rekonstruktion unvollständiger computertomografischer Modelldatensätze mit Directt-Algorithmus N2 - Modellrechnungen zur Rekonstruktion unvollständiger computertomographischer Datensätze werden zur Ermittlung der Vorteile des neuen Directt-Algorithmus gegenüber der konventionellen gefilterten Rückprojektion durchgeführt, insbesondere auch zur Vermeidung experimentell begründeter Unwägbarkeiten. Ein entsprechender Bedarf entsteht seitens erweiterter Forschungsaktivitäten und industrieller Bedürfnisse, wo die Rekonstruktion limitierter Messdatensätze von Artefakten dominiert wird. Die bekanntesten Einschränkungen betreffen das Limited-View- und Few-Angles-Problem sowie die ROI-Situation, die jeweils unabhängig voneinander untersucht werden, in der Anwendung jedoch zumeist undefiniert vermischt sind, wie etwa in der Elektronen-Tomografie. Die hochauflösende Rekonstruktion von Einzelpixeln wird durch die Wahl eines kleinen Modells von nur 1012 Pixeln visualisiert und ist ohne Filterung möglich. Rekonstruktionen von 90°-Sektoren oder 50 % -ROI-Querschnitten sind fast ohne Auflösungseinschränkungen realisierbar. Die bisher nicht bekannte Möglichkeit, auch außerhalb der ROI präzise zu rekonstruieren, wurde als "Extended ROI"-Methode erfolgreich erprobt. KW - Computed tomography KW - Reconstruction algorithm KW - Filtering KW - Limited view KW - Region of interest PY - 2010 SN - 0025-5300 VL - 52 IS - 10 SP - 668 EP - 675 PB - Hanser CY - München AN - OPUS4-22068 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Manke, I. A1 - Kardjilov, N. A1 - Arlt, Tobias A1 - Grothausmann, R. T1 - Rekonstruktion limitierter CT-Messdatensätze von Brennstoffzellen mit Directt N2 - Die Aufklärung spezifischer Fragestellungen zur Funktionalität von PEM(polymer electrolyte membrane)- und DMFC(Direct Methanol)-Brennstoffzellen bedarf der 3D-Abbildung der spezifischen Komponenten mit unterschiedlichen Strahlungsarten: des Wassergehalts in den Flow Fields mit Neutronen, der Katalysator-Alterung in der MEA (membrane electrode assembly) mit Synchrotronstrahlung und der freien (reaktiven) Katalysator-Oberfläche von Nano-Partikeln mit TEM-Elektronen-Tomografie. Diese Messungen im Bereich der mm- bis nm-Skala unterliegen dabei erheblichen Restriktionen: einer ortsabhängigen Verschmierung der Neutronenradiogramme, Manipulatorinstabilitäten der Synchrotronmessungen sowie einer Kombination von Limited-View-Datensätzen, wenigen Projektionswinkeln und teilweiser Nichtdurchstrahlbarkeit in der Elektronen-CT. Die Vorteile eines fortentwickelten Directt-Algorithmus für die Bewältigung dieser Randbedingungen gegenüber gefilterten Rückprojektionen werden aufgezeigt. KW - Computed tomography KW - Reconstruction algorithm KW - Electron tomography KW - Neutron tomography KW - Catalyst KW - Fuel cell PY - 2010 SN - 0025-5300 VL - 52 IS - 10 SP - 676 EP - 683 PB - Hanser CY - München AN - OPUS4-22070 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Grothausmann, R. A1 - Manke, I. A1 - Zehl, G. A1 - Dorbandt, I. A1 - Bogdanoff, P. A1 - Fiechter, S. A1 - Hentschel, Manfred P. A1 - Lange, Axel A1 - Kupsch, Andreas A1 - Hilger, A. T1 - Charakterisierung von Katalysatormaterialien für Brennstoffzellen mittels Elektronentomografie N2 - Zur Optimierung moderner Katalysatoren für Brennstoffzellen werden diese elektronen-tomografisch charakterisiert. Die Elektronentomografie ermöglicht einzigartige Einblicke in die Nanometer-Strukturen der metallischen Katalysatorpartikel, die auf einem elektrisch leitenden, inerten Kohlenstoffträger abgeschieden werden. Die dreidimensional bildgebende Methode ermöglicht über qualitative Untersuchungen hinaus detaillierte quantitative Form- und Strukturanalysen der Katalysatormaterialien. So werden beispielsweise die Positionen der Katalysatorpartikel relativ zum Trägermaterial analysiert. Ihre Form und Einbettung in den Träger, welche die für die katalytische Reaktion maßgebliche "freie Oberfläche" definieren, werden bestimmt. Die Elektronentomografie ermöglicht somit quantitative Vergleiche zwischen verschiedenen Katalysatormaterialien und Herstellungsverfahren. Sie erweitert die Möglichkeiten der Korrelation gewünschter elektrochemischer Eigenschaften mit der Nanostruktur dieser Materialien und macht so weitere Optimierungen der Katalysatormaterialien möglich. KW - Computed tomography KW - Reconstruction algorithm KW - Electron tomography KW - Catalyst KW - Fuel cell PY - 2010 SN - 0025-5300 VL - 52 IS - 10 SP - 706 EP - 711 PB - Hanser CY - München AN - OPUS4-22072 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Behnke, Thomas A1 - Hoffmann, Katrin A1 - Würth, Christian A1 - Pauli, Jutta A1 - Mathejczyk, J. A1 - Alves, F. A1 - Resch-Genger, Ute T1 - NIR-Fluorescent Nano- and Micrometer-sized Particles for Biomedical and Diagnostical Applications T2 - Faraday Discussion, University of Edinburgh CY - Edinburgh, Scotland DA - 2010-09-06 PY - 2010 AN - OPUS4-22073 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Nöther, Nils A1 - Schukar, Marcus A1 - Wendt, Mario A1 - Witt, Jens A1 - Wosniok, Aleksander T1 - Technology and Applications of Smart Technical Textiles Based on Fibre Optic Sensors T2 - OSA International Conference "Optical Sensors" CY - Karlsruhe, Germany DA - 2010-06-21 PY - 2010 AN - OPUS4-22074 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Witt, Jens A1 - Steffen, Milan A1 - Schukar, Marcus A1 - Krebber, Katerina T1 - Investigation of sensing properties of microstructured polymer optical fibres T2 - SPIE Photonics Europe CY - Brussels, Belgium DA - 2010-04-15 PY - 2010 AN - OPUS4-22075 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heyn, Andreas T1 - Neue Korrosionsschutzkonzepte unter die Lupe genommen T2 - BAM-Kolloqium CY - Berlin, Germany DA - 2010-07-14 PY - 2010 AN - OPUS4-22127 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Droste, Bernhard A1 - Ulrich, Armin A1 - Borch, Jörg-Peter T1 - Brandnew Fire Test facilities at "BAM Test Site Technical Safety" T2 - 16th International Symposium on the Packaging and transportation of Radioactive Materials PATRAM CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-22129 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Droste, Bernhard A1 - Musolff, André A1 - Müller, Karsten A1 - Quercetti, Thomas T1 - Drop and Fire Testing of spent Fuel and HLW Transport Casks at "BAM Test Site Technical safety" T2 - Waste Management Conference !M 2010 CY - Phoenix, AZ, USA DA - 2010-03-07 PY - 2010 AN - OPUS4-22131 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank A1 - Droste, Bernhard A1 - Müller, Karsten A1 - Zencker, Uwe T1 - Mechanical Design Assessment Approaches of Actual Spent Fuel and HLW Transport Package Designs T2 - 16th International Symposium of the Packaging and transportation of Radioactive Materials PATRAM CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-22132 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Musolff, André A1 - Droste, Bernhard A1 - Quercetti, Thomas A1 - Müller, Karsten A1 - Komann, Steffen T1 - Drop Test Program with the Half-Scale Model CASTOR HAW/TB2 T2 - 16th International Symposium on the Packaging and Transport of Radioactive Materials PATRAM CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-22133 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hübner, S. A1 - Jähnisch, K. A1 - Bludszuweit-Phillip, C. A1 - Lukow, K. A1 - Schilling, A. A1 - Huebschmann, S. A1 - Krailisch, D. A1 - Jänich, I. A1 - Liebner, Christian A1 - Hieronymus, Hartmut T1 - The development of ultrasound supported multiphase reactions in microstructured devices T2 - ProcessNet Jahrestagung 2010 CY - Aachen, Germany DA - 2010-09-21 PY - 2010 AN - OPUS4-22135 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schukar, Vivien A1 - Kusche, Nadine A1 - Habel, Wolfgang T1 - How reliable do fibre Bragg grating patches perform as strain sensors? T2 - 4th European Workshop on Optical Fibre Sensors CY - Oporto, Portugal DA - 2010-09-08 PY - 2010 AN - OPUS4-22086 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider-Gloetzl, J. A1 - Gloetzl, R. A1 - Krebber, Katerina A1 - Liehr, Sascha A1 - Wendt, Mario A1 - Wosniok, Aleksander T1 - Geotechnical Monitoring of Construction Activities by Distributed Fibre Optic Sensors Embedded in Geotextiles T2 - 5th European Workshop on Structural Health Monitoring CY - Sorrento, Italy DA - 2010-06-29 PY - 2010 AN - OPUS4-22087 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Nichtrostende Stähle im Bauwesen - Neue Ansätze zur korrosionsschutzgerechten Werkstoffauswahl Z-30.3-6 T2 - Wissenschaft trifft Handwerk - Neue Werkstoffe und Verfahren auf der Baustelle, Berlin HWK, Innung Metall- und Kunststofftechnik CY - Berlin, Germany DA - 2010-09-22 PY - 2010 AN - OPUS4-22088 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Würth, Christian A1 - Lochmann, Cornelia A1 - Spieles, Monika A1 - Pauli, Jutta A1 - Hoffmann, Katrin A1 - Schüttrigkeit, T. A1 - Franzl, T. A1 - Resch-Genger, Ute T1 - Evaluation of a commercial integrating sphere setup for the determination of absolute photoluminescence quantum yields of dilute dye solutions N2 - The commercial availability of stand-alone setups for the determination of absolute photoluminescence quantum yields (φf) in conjunction with the increasing use of integrating sphere accessories for spectrofluorometers is expected to have a considerable influence not only on the characterization of chromophore systems for use in optical and opto-electronic devices, but also on the determination of this key parameter for (bio)analytically relevant dyes and functional luminophores. Despite the huge potential of systems measuring absolute φf values and the renewed interest in dependable data, evaluated protocols for even the most elementary case, the determination of the fluorescence quantum yield of transparent dilute solutions of small organic dyes with integrating sphere methods, are still missing. This encouraged us to evaluate the performance and sources of uncertainty of a simple commercial integrating sphere setup with dilute solutions of two of the best characterized fluorescence quantum yield standards, quinine sulfate dihydrate and rhodamine 101, strongly differing in spectral overlap between absorption and emission. Special attention is dedicated to illustrate common pitfalls of this approach, thereby deriving simple procedures to minimize measurement uncertainties and improve the comparability of data for the broad community of users of fluorescence techniques. KW - Lifetime KW - Fluorescence KW - Luminescence KW - Quantum yield KW - Quantum efficiency KW - Integrating sphere KW - Reabsorption KW - Rhodamine 101 KW - Quinine sulfate dihydrate KW - Method KW - Photoluminescence KW - Standard KW - Emission KW - Spectral correction KW - Excitation KW - Anisotropy PY - 2010 DO - https://doi.org/10.1366/000370210791666390 SN - 0003-7028 SN - 1943-3530 VL - 64 IS - 7 SP - 733 EP - 741 PB - Society for Applied Spectroscopy CY - Frederick, Md. AN - OPUS4-22089 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eiben, Mario T1 - Datenbank GEFAHRGUT - Nutzen für Hersteller und Verwender von IBC T2 - AK Inspektionsstellen, BAM CY - Berlin, Germany DA - 2010-09-28 PY - 2010 AN - OPUS4-22090 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Körner, Ursula T1 - Ergebnisse und Konsequenzen aus dem Stichprobenprüfverfahren T2 - AK-Prüfstellen, BAM CY - Berlin, Germany DA - 2010-09-22 PY - 2010 AN - OPUS4-22091 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schälike, Stefan A1 - Schönbucher, A. A1 - Vela-Wallenschus, Iris A1 - Wehrstedt, Klaus-Dieter T1 - Vorhersage der thermischen Strahlung von KW-Poolfeuern mit CFD-Simulation T2 - Workshop Brandschutzforschung des Technisch-Wissenschaftlichen Beirates der Vereinigung zur Förderung des deutschen Brandschutzes e. V. CY - Magdeburg, Germany DA - 2010-10-04 PY - 2010 N1 - Geburtsname von Vela-Wallenschus, Iris: Vela, I. - Birth name of Vela-Wallenschus, Iris: Vela, I. AN - OPUS4-22092 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter A1 - Schönbucher, A. T1 - Safety aspects of organic peroxide pool fires T2 - CUMBURA 2010 (Combustion Research and Application) CY - Maastricht, Netherlands DA - 2010-10-12 PY - 2010 AN - OPUS4-22093 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Konersmann, Rainer T1 - Lastfall Flugzeugabsturz N2 - Das Flugzeug ist heutzutage eines der wichtigsten Transportmittel. Wie alle Beförderungsmittel ist auch das Luftfahrzeug nicht frei von Versagensrisiken. Gemessen an der Anzahl der weltweiten täglichen Flugbewegungen, der zurückgelegten Transportkilometer und der vergleichsweise geringen Anzahl von Totalverlusten, so schwer diese im Einzelfall auch sein mögen, sind sich viele Fachleute darüber einig, dass das Flugzeug auch ein sicheres Transportmittel ist. Die meisten Flugzeugabstürze ereignen sich in gerader Verlängerung der Landebahnachsen, also innerhalb der Einflugschneisen. Hin und wieder werden jedoch auch flugplatzferne Anlagen oder Gebäude durch einen Absturz in Mitleidenschaft gezogen. In besonderem Maße scheinen dabei hohe Bauwerke, z. B. Hochhäuser betroffen zu sein. Dies wirft natürlich die Frage auf, mit welchen Konsequenzen in diesen Fällen zu rechnen ist bzw. ob ggf. Schutzmaßnahmen empfohlen werden können. Die Auswertung einiger Unfallereignisse gibt darauf eine klare Antwort. KW - Risiko KW - Flugzeugabsturz KW - Kinetische und thermische Energieeinträge PY - 2010 SN - 1434-9728 SN - 1436-4948 SN - 0372-2457 SN - 0376-1185 VL - 51 IS - 10 SP - 36 EP - 41 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-22096 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ante, A. A1 - Trumpler, A. A1 - Niermann, S. A1 - Decker, Renate A1 - Hermann, L. A1 - Adam, Christian T1 - SUSAN - Sustainable and safe re-use of municipal sewage sludge for nutrient recovery KW - Sewage sludge KW - Phosphorus KW - Recycling KW - Thermochemical treatment KW - Heavy metal removal KW - Large scale consideration PY - 2010 SN - 0016-3651 VL - 151 IS - 13 SP - 78 EP - 84 PB - Oldenbourg-Industrieverl. CY - München AN - OPUS4-22097 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gumenyuk, Andrey A1 - Gook, Sergej A1 - Rethmeier, Michael A1 - Kohn, H. T1 - Orbitalschweißen im Pipelinebau neue Möglichkeiten durch die Anwendung von Hochleistungslasern T2 - 8. Internationale Konferenz Strahltechnik CY - Halle (Saale), Germany DA - 2010-04-14 PY - 2010 AN - OPUS4-22100 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wloka, Monika T1 - Qualitätssicherung im analytischen Labor T2 - NOVIA-Anwenderforum 2010 CY - Bad Soden, Germany DA - 2010-10-05 PY - 2010 AN - OPUS4-22101 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Ultrasound measuring system for flow front and cure monitoring at composite manufacturing (RTM, prepreg, injection moulding) T2 - Composite Europe, 5. Europäische Fachmesse und Forum für Verbundstoffe, Technologie und Anwendungen CY - Essen, Germany DA - 2010-09-14 PY - 2010 AN - OPUS4-22102 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Robertson, Daniela A1 - Schröder, Hartmut T1 - Oxidationsbeständigkeit von Geokunststoffen T2 - 10. Schwarzheider Kunststoffkolloquium CY - Schwarzheide, Germany DA - 2010-09-08 PY - 2010 AN - OPUS4-22103 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Hölck, O. A1 - Heuchel, M. A1 - Hofmann, D. T1 - Charakterization of gas sorption in glassy polymers using experimental and molecular modeling techniques T2 - 14th International Conference "Polymeric Materials" CY - Halle (Saale), Germany DA - 2010-09-15 PY - 2010 AN - OPUS4-22104 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Frank T1 - Untersuchungmethoden und -methodologien für Bauschadensanalysen T2 - VDB-Fachveranstaltung "Geplante Bauschäden", BAM CY - Berlin, Germany DA - 2010-09-21 PY - 2010 AN - OPUS4-22105 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gradt, Thomas ED - Czichos, Horst ED - Habig, K.-H. T1 - Vakuumtribologie KW - Tribologie KW - Kryotechnik KW - Vakuumtechnik KW - Festschmierstoffe KW - Polymerkomposite PY - 2010 SN - 978-3-8348-1810-2 SP - 586 EP - 598 PB - Springer-Vieweg CY - Wiesbaden ET - 3. Aufl. AN - OPUS4-22076 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gradt, Thomas ED - Czichos, Horst ED - Habig, K.-H. T1 - Tieftemperaturtribologie KW - Tribologie KW - Kryotechnik KW - Vakuumtechnik KW - Festschmierstoffe KW - Polymerkomposite PY - 2010 SN - 978-3-8348-1810-2 SP - 599 EP - 610 PB - Springer-Vieweg CY - Wiesbaden ET - 3. Aufl. AN - OPUS4-22078 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. A1 - Bartholmai, Matthias A1 - Wiggerich, B. A1 - Schiller, J. A1 - Manolov, Manol T1 - Micro-Drone for the characterization and Self-Optimization Search of Hazardous Gaseous Substance Sources: A new Approach to determine Wind Speed and Direction T2 - IEEE International Workshop on Robotics and Sensors Environments CY - Phoenix, AZ, USA DA - 2010-10-15 PY - 2010 AN - OPUS4-22079 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Linck, Lena A1 - Resch-Genger, Ute T1 - Optimized Fluorescence Detection for RCA-Assays on Microarrays T2 - Kolloquium CY - Potsdam, Germany DA - 2010-08-25 PY - 2010 AN - OPUS4-22081 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Nöther, Nils A1 - Wendt, Mario A1 - Wosniok, Aleksander T1 - Protection of critical infrastructure using fiber optic sensors in technical textiles T2 - SPIE International Conference "Defense, Security + Sensing" CY - Orlando, FL, USA DA - 2010-04-05 PY - 2010 AN - OPUS4-22083 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hoffmann, Katrin A1 - Behnke, Thomas A1 - Resch-Genger, Ute T1 - Lifetime-based Discrimination Between Spectrally Matching vis and NIR Emitting Particle Labels and Probes T2 - 16th International Workshop on "Single Molecule Spectroscopy and Ultra Sensitive Analysis in the Life Sciences" CY - Berlin, Germany DA - 2010-09-15 PY - 2010 AN - OPUS4-22084 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlüter, Vivien T1 - Strukturintegrierte Sensorik in Flugzeugen T2 - Hannover-Messe CY - Hanover, Germany DA - 2010-04-19 PY - 2010 AN - OPUS4-22085 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Braun, Ulrike A1 - Böhning, Martin T1 - Durability of Thermoplastic Polyurethanes (TPU) T2 - Polydays 2010 CY - Berlin, Germany DA - 2010-10-03 PY - 2010 AN - OPUS4-22107 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wettmarshausen, Sascha A1 - Meyer-Plath, Asmus A1 - Friedrich, Jörg F. A1 - Hanelt, Sven A1 - Mix, Renate A1 - Mach, Reinhard A1 - Zeynalov, Eldar T1 - Plasma chemical bromination, functionalization and grafting of organic molecules onto graphene-like carbon materials T2 - PSE 2010 CY - Garmisch-Partenkirchen, Germany DA - 2010-09-13 PY - 2010 AN - OPUS4-22108 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Proske, T. A1 - Kühne, Hans-Carsten T1 - Segregation of Coarse Aggregates in Self Compacting Concrete T2 - 6th International RILEM Symposium on Self-Compacting Concrete CY - Montreal, Canada DA - 2010-09-26 PY - 2010 AN - OPUS4-22109 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hertwig, Andreas A1 - Beck, Uwe A1 - Krüger, Hannes A1 - Lohse, Volkmar A1 - Nooke, Alida A1 - Krause, Andreas A1 - Steinbach, J. T1 - Gas Monitoring with the SPR Effect and Ellipsometric Detection T2 - Third NanoCharm Workshop an Non-Destructive Real Time Process Control CY - Berlin, Germany DA - 2010-10-13 PY - 2010 AN - OPUS4-22110 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habib, Abdel Karim A1 - Schalau, Bernd T1 - Beurteilung verschiedener Ansätze zur Modellierung einer Lachenverdunstung im Rahmen von Störfallauswirkungsbetrachtungen T2 - DECHEMA Arbeitskreis "Auswirkung von Stoff- und Energiefreisetzungen" CY - Frankfurt am Main, Germany DA - 2010-10-01 PY - 2010 AN - OPUS4-22111 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Hensel, Christina A1 - Schmidtchen, Ulrich A1 - Holtappels, Kai T1 - The behavior of acetylene cylinders involved in fire: an experimental and numerical analysis T2 - CHISA 2010 CY - Prague, Czech Republic DA - 2010-08-28 PY - 2010 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. AN - OPUS4-22112 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Noskov, Sergey A1 - Lang, Thomas A1 - Eslahian, Kyriakos-Alexandros A1 - Maskos, Michael T1 - Characterization of Polymer Nanoparticles by Field-Flow Fractionation (FFF) T2 - Polydays 2010 CY - Berlin, Germany DA - 2010-10-03 PY - 2010 AN - OPUS4-22113 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Charakterisierung des Aushärtungsverhaltens von vernetzenden Kunststoffen - vom Labor in die Fertigung T2 - Vortragsveranstaltung Fraunhofer Institut für angewandte Polymerforschung (IAP) CY - Potsdam, Germany DA - 2010-10-08 PY - 2010 AN - OPUS4-22114 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schalau, Bernd T1 - Freistahlmodellierung T2 - DECHEMA / GVC - Arbeitsausschuss "Auswirkung von Stoff- und Energiefreisetzungen" CY - Frankfurt am Main, Germany DA - 2010-10-01 PY - 2010 AN - OPUS4-22115 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ried, Peter A1 - Gaber, Martin A1 - Kluge, Martin A1 - Müller, Ralf A1 - Holtappels, Kai A1 - Eliezer, Dan T1 - H2-permeability and burst pressure of glass capillaries N2 - This publication deals with the topics: pressure loading, permeability and burst pressure T2 - Intern. Con. on Glass ICG 2010 CY - Bahia, Brazil DA - 20.09.2010 KW - Pressure loading KW - Permeability KW - Burst pressure PY - 2010 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. AN - OPUS4-22296 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weber, Gert A1 - Gaul, Holger A1 - Rethmeier, Michael T1 - Joining of Ultra High Strength Steels for Lightweight Body Shell Design in Automobile Manufacturing T2 - 50th International Deep Drawing Research Group Conference CY - Graz, Austria DA - 2010-05-31 PY - 2010 AN - OPUS4-22297 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Proske, T. A1 - Kühne, Hans-Carsten ED - Khayat, K.H. ED - Feys, D. T1 - Segregation of coarse aggregates in self-compacting concrete N2 - A major requirement on self-compacting concrete (SCC) is the resistance to any kind of separation. In the presented studies the segregation behavior of aggregates was analyzed systematically. The rheology of selfcompacting mortars was dealt with at first. Following, the segregation of particles of different size, shape and density in various mortars was examined. The aim was to find an analytical relation to estimate the risk of sedimentation, using the characteristics of the particles and those of the mortars. The classification of the aggregates according to their potential segregation is rather simple. But the description of the segregation resistance of the mortar is much more difficult. It is not possible to evaluate a mortar solely based on the rheological properties. The mixture composition must always be considered as well. Tests on concrete samples were conducted additionally to determine the influence of the overall system of SCC on the sedimentation of the aggregates. T2 - SCC2010 - Design, production and placement of self-consolidating concrete CY - Montreal, Canada DA - 2010-09-26 KW - Rheology KW - Segregation KW - Static yield stress KW - Mixture proportioning KW - Aggregates KW - Rheologie KW - Sedimentation KW - Statische Fließgrenze KW - Mischungszusammensetzung KW - Gesteinskörnung PY - 2010 SN - 978-90-481-9663-0 DO - https://doi.org/10.1007/978-90-481-9664-7_10 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 1 IS - 3 SP - 113 EP - 125 PB - Springer AN - OPUS4-22298 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Goebbels, Jürgen A1 - Beck, Matthias A1 - Isecke, Bernd A1 - Burkert, Andreas A1 - Bäßler, Ralph ED - Castro-Borges, P. ED - Moreno, E.I. ED - Sakai, K. ED - Gjorv, O.E. ED - Banthia, N. T1 - Self-corrosion of steel in concrete by electrochemical measurements and X-ray tomography T2 - CONSEC`10 - 6th International conference on concrete under severe conditions CY - Mérida, Yucatán, Mexico DA - 2010-06-07 KW - Self-corrosion KW - Steel KW - Concrete KW - X-ray tomography PY - 2010 SN - 978-0-415-59316-8 VL - 2 SP - 1221 EP - 1228 PB - Taylor & Francis CY - London, UK AN - OPUS4-22299 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Böhme, Thilo T1 - Statusbericht GSBL Datenbank Bandbreiten der Brenn- und Explosionskenngrößen von Stäuben T2 - ProcessNet Arbeitsausschuss "Sicherheitstechnische Kenngrößen" CY - Frankfurt am Main, Germany DA - 2010-10-27 PY - 2010 AN - OPUS4-22300 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schoßig, Jörg A1 - Schmidt, Martin T1 - Forschungsvorhaben "Adiabate Warmlagerung" T2 - ProcessNet Arbeitsausschuss "Sicherheitstechnische Kenngrößen" CY - Frankfurt am Main, Germany DA - 2010-10-27 PY - 2010 AN - OPUS4-22301 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Lüth, Peter A1 - Malow, Marcus A1 - Schoßig, Jörg T1 - Isoperibole Warmlagerung Einfluss der Streuung experimentell ermittelter Selbstentzündungstemperaturen auf die Übertragung in den technischen Maßstab T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-22302 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Lüth, Peter T1 - Interlaboratory test 2010/11 "EN 15188:2007 - Self-ignition temperature" T2 - ProcessNet Arbeitsausschuss "Sicherheitstechnische Kenngrößen" CY - Frankfurt am Main, Germany DA - 2010-10-27 PY - 2010 AN - OPUS4-22303 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schoßig, Jörg A1 - Schmidt, Martin A1 - Krause, Ulrich T1 - Ergebnisse des Forschungsvorhabens "Adiabate Warmlagerung" T2 - Arbeitsausschuss "Brennbare Stäube" CY - Freiberg, Germany DA - 2010-06-23 PY - 2010 AN - OPUS4-22304 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Schukar, Marcus A1 - Wendt, Mario A1 - Witt, Jens T1 - Distributed POF sensors - recent progress and new challenges N2 - The potential of the use of POF as distributed sensors in several application fields has been successfully demonstrated. The distributed POF sensors have moved from the laboratory to the field. The paper presents the recent progress in the development of distributed POF sensors and addresses the main challenges to this innovative technology. T2 - POF 2010 - 19th International conference on plastic optical fibers CY - Yokohama, Japan DA - 2010-10-19 PY - 2010 IS - Sensors-2 SP - 1 EP - 4 AN - OPUS4-22305 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiegner, Katharina A1 - Horn, Wolfgang A1 - Wilke, Olaf T1 - Auswertung von Ringversuchen zu VOC-Messungen in Emissionskammern T2 - Workshop: Arbeiten mit ProLap Plus 2010 CY - Dresden, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22246 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wienecke, Bernd-Uwe T1 - Reservekanister für Kraftstoffe - Verwendung im ADR T2 - Gefahrstoffe Gefahrgutverpackungen in der Praxis, BAM CY - Berlin, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22247 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Utech, S. A1 - Scherer, Christian A1 - Krohne, K. A1 - Carrella, L. A1 - Rentschler, E. A1 - Gasi, T. A1 - Ksenofontov, V. A1 - Felser, C. A1 - Maskos, Michael T1 - Magnetic polyorganosiloxane core-shell nanoparticles: Synthesis, characterization and magnetic fractionation N2 - Here, we present the synthesis, characterization and magnetic separation of magnetic polyorganosiloxane nanoparticles. Magnetic iron oxide nanoparticles with average particle radii of 3.2 nm had been synthesized by a simple coprecipitation process of iron(II) and iron(III) salt in basic solution. Afterwards, the particles were successfully incorporated into a polyorganosiloxane network via a polycondensation reaction of trimethoxymethylsilane (T), diethoxydimethylsilane (D) and the functional monomer (chloromethylphenyl)trimethoxysilane (ClBz-T) in aqueous dispersion. A core–shell system was chosen to increase the flexibility of the system concerning size, composition and functionalization possibilities. The magnetic nanocapsules with particle radii below 60 nm were separated from non-magnetic material with a high effectiveness by the use of commercially available separation columns which are commonly used for isolation of microbeads and subsequently characterized via transmission electron microscopy (TEM), asymmetrical flow field-flow fractionation (AF-FFF), superconducting quantum interference device (SQUID) and Mössbauer spectroscopy. KW - Nanoparticle KW - Magnetic KW - Encapsulation KW - Polyorganosiloxane KW - Magnetic separation PY - 2010 DO - https://doi.org/10.1016/j.jmmm.2010.06.056 SN - 0304-8853 VL - 322 IS - 21 SP - 3519 EP - 3526 PB - Elsevier CY - Amsterdam AN - OPUS4-22248 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John T1 - Assimilierungsliste: welche Vorteile bietet sie, welche Änderungen stehen an? T2 - Fachveranstaltung Haus der Technik "Gefahrgutverpackungen in der Praxis", BAM CY - Berlin, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22249 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neitsch, Marcel A1 - Körner, Ursula T1 - Qualitätssicherung und Überwachung T2 - Fachveranstaltung "Gefahrgutverpackungen in der Praxis", BAM CY - Berlin, Germany DA - 2010-10-27 PY - 2010 AN - OPUS4-22250 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kasparek, Eva Maria A1 - Scheidemann, Robert A1 - Wolff, Dietmar A1 - Völzke, Holger T1 - Effect of Dynamic Loading on Compressional Behavior of Damping Concrete T2 - PATRAM 2010 (16th International Symposium on the Packaging and Transport of Radioactive Materials) CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-22251 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Komann, Steffen A1 - Neumann, Martin A1 - Ballheimer, Viktor A1 - Wille, Frank A1 - Weber, Mike A1 - Qiao, Linan A1 - Droste, Bernhard T1 - Mechanical Assessment within Type B Packages Approval, The Application of Static and Dynamic Calculation Approaches T2 - 16th International Symposium on the Packaging and Transport of Radioactive Materials CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-22252 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liebner, Christian A1 - Heinrich, Sebastian A1 - Hieronymus, Hartmut A1 - Fischer, J. A1 - Klemm, E. T1 - Untersuchungen zur Explosionsdynamik in Mikrostrukturen T2 - 671. DECHEMA-Kolloquium CY - Frankfurt am Main, Germany DA - 2010-10-28 PY - 2010 AN - OPUS4-22253 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maziere, Matthieu A1 - Fedelich, Bernard T1 - Simulation of fatigue crack growth by crack tip plastic blunting using cohesive zone elements N2 - The propagation of a fatigue crack in 2D specimens by crack tip plastic blunting is simulated by using a Finite Element implementation of the strip-yield model. At each cycle, the crack growth is assumed to result from the variation of the Crack Tip Opening Displacement (ΔCTOD). The implementation is based on cohesive elements with an elastic perfectly plastic behavior, which allows to simulate, the crack closure phenomena due to the plastic wake behind the crack tip. A mesh sensitivity analysis provides the minimum number of elements requested in the crack tip plastic zone for a given accuracy. Then, the advance scheme based on crack tip blunting is described. Finally, the variation of the opening load with respect to the load ratio R, and to the maximum load is investigated and compared with analytical results. KW - Fatigue crack growth KW - Cohesive model KW - Crack closure PY - 2010 DO - https://doi.org/10.1016/j.proeng.2010.03.221 SN - 1877-7058 VL - 2 IS - 1 SP - 2055 EP - 2064 PB - Elsevier CY - Amsterdam [u.a.] AN - OPUS4-22254 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Frunza, S. A1 - Schönhals, Andreas A1 - Frunza, L. A1 - Ganea, P. A1 - Kosslick, H. A1 - Harloff, J. A1 - Schulz, A. T1 - Molecular relaxation processes in a MOF-5 structure revealed by broadband dielectric spectroscopy: signature of phenylene ring fluctuations N2 - The molecular mobility of a MOF-5 metal–organic framework was investigated by broadband dielectric spectroscopy. Three relaxation processes were revealed. The temperature dependence of their relaxation rates follows an Arrhenius law. The process observed at lower temperatures is attributed to bending fluctuations of the edges of the cages involving the Zn–O clusters. The processes ('region II') at higher temperatures were assigned to fluctuations of phenyl rings in agreement with the NMR data found by Gould et al. (J. Am. Chem. Soc. 2008, 130, 3246). The carboxylate groups might also be involved. The rotational fluctuations of the phenyl rings leading to the low frequency part of relaxation region II might be hindered either by some solvent molecules entrapped in the cages or by an interpenetrated structure and have a broad distribution of activation energies. The high frequency part of region II corresponds nearly to a Debye-like process: This is explained by a well-defined structure of empty pores. PY - 2010 DO - https://doi.org/10.1021/jp1071617 SN - 1520-6106 SN - 1520-5207 SN - 1089-5647 VL - 114 IS - 40 SP - 12840 EP - 12846 PB - Soc. CY - Washington, DC AN - OPUS4-22255 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schröder, Volkmar T1 - Grundlagen des Explosionsschutzes - Einführung T2 - DECHEMA-Weiterbildungskurs "Grundlagen und rechtliche Anforderungen des Explosionsschutzes" CY - Frankfurt am Main, Germany DA - 2010-11-02 PY - 2010 AN - OPUS4-22266 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schröder, Volkmar A1 - Molnarne, Maria T1 - Verlässliche Datenquellen - Darstellung der Kenngrößen in der Datenbank CHEMSAFE T2 - DECHEMA-Weiterbildung "Grundkurs und rechtliche Anforderungen des Explosionsschutzes" CY - Frankfurt am Main, Germany DA - 2010-11-02 PY - 2010 AN - OPUS4-22267 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schröder, Volkmar T1 - Sicherheitstechnische Kenngrößen von Gasen und Gasgemischen T2 - DECHEMA-Weiterbildungskurs "Grundlagen und rechtliche Anforderungen des Explosionsschutzes" CY - Frankfurt am Main, Germany DA - 2010-11-02 PY - 2010 AN - OPUS4-22268 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fedelich, Bernard A1 - Vöse, Markus ED - Klingbeil, D. ED - Vormwald, M. ED - Eulitz, K.-G. T1 - Modeling of creep damage by multiple cavity growth on grain boundaries T2 - 18th European conference on fracture (ECF 18) - Fracture of materials and structures from micro to macro scale CY - Dresden, Germany DA - 2010-08-30 KW - Creep KW - Cavities KW - Grain boundary KW - Damage PY - 2010 SN - 978-3-00-031802-3 SP - 1 EP - 8 AN - OPUS4-22269 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lorenz, Stephan A1 - Kannengießer, Thomas A1 - Herold, H. A1 - Posch, G. T1 - Suitability of high alloyed wire electrodes for the positional laser-GMA-hybrid welding N2 - Laser-gas metal arc (GMA)-hybrid welding enables a high deposition rate and a stable welding process. Process stability was found to be profoundly dependent on the type of the applied filler wire (solid or tubular cored). Whereas solid wires are deposited in pulsed arc mode, tubular cored wire electrodes are weldable by a stable spray-arc process within a wide operating range. This fact applies above all to a high alloyed metal cored wire electrode, of which the achievable deposition rates exceed the upper limits recommended by the manufacturer. A further interesting aspect is the application of a rutile tubular cored wire for positional laser-GMA-hybrid welding. A modern 20 kW-fibre laser source was available for the experiments. This study is concerned with the weldability of high alloyed tubular cored electrodes for high power laser-GMA-hybrid welding. Results obtained from comparative investigations between tubular cored and solid wire electrodes relating to process stability are summarised. KW - Austenitic stainless steel KW - Flux cored wire electrodes KW - Solid wire electrodes KW - Laser hybrid welding KW - Stainless steel KW - Laser welding KW - Welding speed KW - Welding position KW - Fibre laser KW - Process stability KW - Vertical position down KW - Charpy V-notch impact test KW - GMA welding KW - Gas metal arc welding KW - Weldability PY - 2010 DO - https://doi.org/10.1504/IJMMP.2010.035943 SN - 1741-8410 SN - 1741-8429 VL - 5 IS - 2/3 SP - 245 EP - 260 PB - Inderscience Enterprises Ltd CY - Genève, Switzerland AN - OPUS4-22270 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Rauchgasanalyse und Brandverhalten von verschiedenen Sitzmaterialien im Transportsektor - ein Vergleich T2 - V. Internationale Expertentagung FIRE SAFETY IN RAIL SYSTEMS CY - Vienna, Austria DA - 2010-10-21 PY - 2010 AN - OPUS4-22271 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pötzsch, Klaus-Michael A1 - Pagenkopf, Marion A1 - Heming, Frank T1 - ADR, Section 9.7.6 Rear protection of tank vehicles T2 - UNECE-AG WP.15, 89. Session CY - Geneva, Switzerland DA - 2010-10-26 PY - 2010 N1 - Geburtsname von Pagenkopf, Marion: Nitsche, M. - Birth name of Pagenkopf, Marion: Nitsche, M. AN - OPUS4-22272 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Baer, Wolfram A1 - Eberle, Arno A1 - Klingbeil, Dietmar ED - Klingbeil, D. ED - Vormwald, M. ED - Eulitz, K.-G. T1 - The impact of ductile cast iron fracture behaviour on dynamic fracture mechanics R-curve testing using key curve methods N2 - Dynamic fracture mechanics characteristics are required for design and safety proof of advanced ductile cast iron (DCI) components. In this paper, the analytical compliance ratio (CR) and numerical finite element (FE) key curve methods were investigated for dynamic Rcurve testing. Two DCI materials, a purely ferritic and a ferritic one with 18 % of pearlite, were tested at room temperature (RT) and -40 °C. The special focus is on the impact of the materials damage and fracture behaviour on performance and limitations of the investigated methods. Systematic metallographic and fractographic microstructural analyses were performed accompanying the test program. Summarizing systematics of the specific damage behaviour and fracture mechanisms were developed taking microstructure, loading rate, specimen geometry and test temperature into account. There has been a change from ductile to brittle fracture mechanism observed at -40 °C with ferritic DCI and even at RT with ferritic-pearlitic DCI. The ferritic-pearlitic DCI did not show Rcurve behaviour at -40 °C and only single Juc values could be determined. Furthermore, with ferritic-pearlitic DCI, random pearlite shares in the ligament caused the relation between loading rate, force-deflection record and crack extension not to remain uniquely defined. Therefore, the FE key curve method proofed not to be applicable since the FE model was based on homogeneous isotropic material and ductile failure mode only. The analytical CR key curve method worked well only with selected combinations of microstructure, specimen geometry and temperature. In summary it has to be concluded that a robust, accurate and sufficiently simple dynamic key curve method that was suited for application in quality control of industrial relevant DCI qualities cannot be provided currently. T2 - 18th European conference on fracture (ECF 18) - Fracture of materials and structures from micro to macro scale CY - Dresden, Germany DA - 2010-08-30 KW - Damage and fracture behaviour KW - Ductile cast iron KW - Dynamic crack resistance curve KW - Key curve PY - 2010 SN - 978-3-00-031802-3 IS - Paper 160 SP - 1 EP - 8 AN - OPUS4-22273 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pötzsch, Klaus-Michael A1 - Jochems, Frank A1 - Otremba, Frank T1 - News aus Tank- und Fahrzeugtechnik und der Arbeit der BAM T2 - IAA, Gefahrguttag 2010 CY - Hanover, Germany DA - 2010-09-24 PY - 2010 AN - OPUS4-22274 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bartholmai, Matthias A1 - Neumann, Patrick P. ED - Fujita, H. ED - Sasaki, J. T1 - Micro-drone for gas measurement in hazardous scenarios via remote sensing T2 - 6th WSEAS International conference on REMOTE SENSING (REMOTE '10) CY - Iwate, Japan DA - 2010-10-04 KW - Remote sensing KW - Micro-drone KW - UAV KW - Gas measurement KW - Emission control KW - Data mapping KW - Monitoring KW - Plume tracking PY - 2010 SN - 978-960-474-233-2 SN - 1792-5088 SP - 149 EP - 152 PB - WSEAS Press AN - OPUS4-22275 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gebhardt, Moritz Oliver A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Implementierung von Wärmequellen für Laserstrahl- und Laser-Hybridschweißungen in ANSYS T2 - CADFEM Users Meeting CY - Aachen, Germany DA - 2010-11-03 PY - 2010 AN - OPUS4-22276 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vasilic, Ksenija A1 - Roussel, N. A1 - Meng, Birgit A1 - Kühne, Hans-Carsten ED - Khayat, K.H. ED - Feys, D. T1 - Computational modeling of SCC flow through reinforced sections N2 - Computational modeling of fresh SCC flow is a comprehensive and time consuming task. The computational time is additionally increased when simulating casting of reinforced sections, where each single reinforcement bar has to be modeled. In order to deal with this issue and to decrease the computational time, an innovative approach of treating a reinforcement network as a porous medium is applied. This contribution presents the model for concrete flow through reinforced sections, based on Computational Fluid Dynamics (CFD), coupling a single-phase flow model for SCC and a continuum macroscopic model for porous medium. In the last part of this paper, numerical simulations are compared with experimental results obtained on model fluids. T2 - SCC2010 - Design, production and placement of self-consolidating concrete CY - Montreal, Canada DA - 2010-09-26 PY - 2010 SN - 978-90-481-9663-0 DO - https://doi.org/10.1007/978-90-481-9664-7_16 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 1 IS - 5 SP - 187 EP - 195 PB - Springer AN - OPUS4-22277 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schröder, Volkmar A1 - Milde, J. A1 - Brandes, E. T1 - Schwer entzündbare Gase und Dämpfe - Erweiterung der europäischen Norm EN 1839 T2 - ProcessNet-Ausschuss "Sicherheitstechnische Kenngrößen" CY - Frankfurt am Main, Germany DA - 2010-10-27 PY - 2010 AN - OPUS4-22278 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Simone ED - Schulz, E. T1 - Rauchgasanalyse und Brandverhalten von verschiedenen Sitzmaterialien im Transportsektor T2 - 5. Internationale Expertentagung Bahnbrandschutz CY - Wien, Österreich DA - 2010-10-21 KW - Upholstered seats KW - FTIR spectroscopy KW - Combustion KW - Smouldering KW - Fire behaviour PY - 2010 SN - 978-3-940727-23-7 VL - 30 SP - 4 EP - 15 PB - IFV Bahntechnik CY - Berlin AN - OPUS4-22279 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kienle, L. A1 - Duppel, V. A1 - Lembke, G. A1 - Mogwitz, B. A1 - Janek, J. A1 - Kreutzbruck, Marc A1 - Simon, A. T1 - Microstructure and magnetoresistance of heterogeneous gold-rich Ag3Au1.1Te2 N2 - Dispersions of very small non-magnetic metal particles or inclusions in a non-magnetic semiconductor matrix are well known to produce unusually large and linear magnetoresistance effects. So far these materials were limited to the binary silver-rich chalcogenides Ag2Se and Ag2Te. In this contribution Ag3AuTe2 was selected as a first candidate for a ternary matrix material, thus offering enhanced capabilities for the generation of heterogeneous microstructure and spatially varying composition on the nanoscale. In gold-rich Ag3Au1.1Te2 two kinds of inhomogeneities are present, namely Au deposits with a size on the micron scale and an inhomogeneous distribution of Au and Ag within the matrix. The matrix consists of micron-sized grains with the structure type of Ag3AuTe2 as studied by electron microscopy. Like the binary silver chalcogenide phases, the material also shows a large and linear magnetoresistance effect. The transversal magnetoresistance effect was measured between 20 K and 270 K in magnetic fields up to B = 5 T. The results are discussed on the basis of existing models for a large and linear positive MR effect. KW - Petzite KW - Magnetosensor KW - Electron microscopy KW - Nonstoichiometry KW - Magnetoresistance PY - 2010 DO - https://doi.org/10.1016/j.solidstatesciences.2010.07.029 SN - 1293-2558 SN - 1873-3085 VL - 12 IS - 10 SP - 1770 EP - 1778 PB - Elsevier CY - Amsterdam AN - OPUS4-22281 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jacobasch, Stefan T1 - Wie finde ich die passende Verpackung: woher bekomme ich Informationen? T2 - Haus der Technik: "Gefahrgutverpackungen in der Praxis - inklusive Laborversuch BAM" CY - Berlin, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22282 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stephan, Martina T1 - Gefahrgutverpackungen - Querbeet durchs Regelwerk T2 - Haus der Technik: "Gefahrgutverpackungen in der Praxis - inklusive Laborversuch BAM" CY - Berlin, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22283 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. T1 - Reconstruction principles of insufficient CT data T2 - Vortrag am Institut für Angewandte Materialforschung, HZB CY - Berlin, Germany DA - 2010-10-04 PY - 2010 AN - OPUS4-22284 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Baer, Wolfram A1 - Eberle, Arno A1 - Klingbeil, Dietmar T1 - The impact of ductile cast iron fracture behaviour on dynamic fracture mechanics R-curve testing using key curve methods T2 - European Conference on Fracture ECF18 CY - Dresden, Germany DA - 2010-08-30 PY - 2010 AN - OPUS4-22285 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ziegert, C. A1 - Müller, Urs A1 - Röhlen, U. T1 - Standardization of earth blocks in Germany T2 - 8th International masonry conference 2010 CY - Dresden, Germany DA - 2010-07-04 KW - Standardization KW - Earth blocks KW - Testing procedures PY - 2010 SP - 981 EP - 988 AN - OPUS4-22306 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schröder, Volkmar A1 - Askar, Enis A1 - Redeker, T. A1 - Flemming, F. T1 - Sicherheitstechnische Kenngrößen von Ethylenoxid / Intergas / Luft-Gemisch bei Sterilisationsprozessen T2 - 10. Fachtagung: Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-22307 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nooke, Alida A1 - Krause, Andreas A1 - Krüger, Hannes A1 - Lohse, Volkmar A1 - Hertwig, Andreas A1 - Beck, Uwe A1 - Steinbach, J. T1 - Detektion von sicherheitstechnisch relevanten Gasen und Gasgemischen mithilfe der optischen Messmethode Ellipsometrie T2 - 10. Fachtagung: Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-22308 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Molnarne, Maria A1 - Schröder, Volkmar T1 - Comparision of Flammability and Oxidinzing Power of Gas Mixtures using the ISO 10156 with measured Flammability Data T2 - Mary Kay O' Connor Process Safety Center International Symposium, College Station CY - College Station, TX, USA DA - 2010-10-26 PY - 2010 AN - OPUS4-22309 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Hensel, Christina A1 - Kreißig, Michael A1 - Schmidtchen, Ulrich A1 - Holtappels, Kai T1 - Unterfeuerung von Acetylendruckgasbehältern T2 - 10. Fachtagung: Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 2010-11-04 PY - 2010 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. AN - OPUS4-22310 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Poli, Marco A1 - Grätz, Rainer A1 - Scheider, Swen A1 - Schröder, Volkmar T1 - Turbulente Explosionsdruckentlastung - Quo vadis? T2 - 10. Fachtagung: Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-22311 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Olbricht, Jürgen A1 - Klingelhöffer, Hellmuth A1 - Neddemeyer, Torsten A1 - Hünert, Daniela A1 - Kranzmann, Axel A1 - Skrotzki, Birgit T1 - The effect of high temperature corrosion in CO2 rich gases on the mechanical properties of super heater materials T2 - Materials Science and Engineering CY - Darmstadt, Germany DA - 2010-08-24 PY - 2010 AN - OPUS4-22312 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Pettelkau, Alexander A1 - Hohendorf, Stefan A1 - Damm, David A1 - Bartholmai, Matthias A1 - Farahbakhsh, Mahin ED - Goedecke, T. T1 - Securing of dangerous goods transports by RFID-tags with sensor-functionality and integrated database "GEFAHRGUT" information (SIGRID) N2 - The project SIGRID investigates and assesses possibilities to enhance the safety and security of dangerous goods transports through the use of the latest RFID-technology. This technology can be used to greatly enhance the transparency of the supply chain and aid logistics companies in complying with regulations. In the context of SIGRID, customized RFID-Sensor-Tags have been developed that monitor dangerous goods during transport and help to prevent hazards by allowing timely countermeasures. In the case of a dangerous goods accident, the available information about the type, amount and condition of the dangerous goods can be used to accurately inform the relief forces. Unavailable or inaccurate information represents a significant problem for the relief forces. This often leads to a delay in the rescue operation, because relief forces must be aware of the substances involved to protect themselves effectively against them. SIGRID aims to close this information gap. To verify the practicability of the underlying concepts, a demonstrator will be build and tests of realistic scenarios will be conducted. T2 - 17th IAPRI World conference on packaging CY - Tianjin, China DA - 2010-10-12 KW - Dangerous goods KW - Sensors KW - Monitoring KW - RFID KW - WLAN KW - Electronic transport documents PY - 2010 SN - 978-1-935068-36-5 SP - 639 EP - 642 PB - Scientific research publishing AN - OPUS4-22313 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meyer-Scherf, Ronald A1 - Holtappels, Kai A1 - Kluge, Martin A1 - Eliezer, Dan T1 - A New Technology for Hydrogen Storage: Theory and Applications for the Transportation and Gas Industries T2 - 5th Forum on New Materials CY - Montecatini Terme, Italy DA - 2010-06-15 PY - 2010 N1 - Geburtsname von Meyer-Scherf, Ronald: Meyer, R. - Birth name of Meyer-Scherf, Ronald: Meyer, R. N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. AN - OPUS4-22314 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Technische Umsetzung und Verwendung der DIN EN 1504-3 für Instandsetzungsmörtel und -betone in Deutschland? KW - Betoninstandsetzung KW - DIN EN 1504 KW - Instandsetzungsmörtel PY - 2010 N1 - Serientitel: Heftreihe Deutscher Beton- und Bautechnik-Verein e.V. – Series title: Heftreihe Deutscher Beton- und Bautechnik-Verein e.V. IS - 19 SP - 35 EP - 49 AN - OPUS4-22315 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kolkoori, Sanjeevareddy A1 - Rahman, Mehbub-Ur A1 - Prager, Jens A1 - Kreutzbruck, Marc T1 - Acoustic Wave Energy Skewing and Coefficients for the reflected and transmitted Plane Waves in General Homogenous Transversely-Isotropic Austentic Materials T2 - 8th International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurised Components CY - Berlin, Germany DA - 2010-09-29 PY - 2010 AN - OPUS4-22236 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jakubowski, Norbert A1 - Prohaska, T. A1 - Roos, P.H. ED - Beauchemin, D. ED - Matthews, D. T1 - Polyatomic ions with double-focusing magnet sector mass spectrometers KW - ICP-MS KW - Sektorfeldgeräte PY - 2010 SN - 978-0-08-043804-7 VL - 5 SP - 132 EP - 150 PB - Elsevier CY - Oxford, UK AN - OPUS4-22237 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schenk, T. A1 - Schwenk, Christopher T1 - Material response of GMA welded 1 mm thick DP600 overlap joints N2 - In a previously published model, gas metal arc welding of 1 mm thick DP600 overlap joints is validated for the transient temperature distribution, the welding distortion and longitudinal residual stresses. Tensile tests have been simulated and performed experimentally. Validations were performed for two clamping cases: an immediate release of the clamps after welding and a release of the clamps after cooling to room temperature. There is good agreement between experiments and simulations. It has been found that the temperature distribution, longitudinal stresses and welding distortions are dependent on the clamping conditions. To explain the effect of the clamping time, a bar model is proposed. It is shown that longer clamping times increase plastic deformation and hence reduce residual stresses and buckling distortion. Additionally for an overlap joint, it has been found that the longitudinal residual stresses are affected significantly by the sample's geometry. KW - Welding simulation KW - Buckling distortion KW - DP600 overlap joint KW - Longitudinal residual stresses PY - 2010 DO - https://doi.org/10.1179/136217110X12714217309777 SN - 1362-1718 SN - 1743-2936 VL - 15 IS - 7 SP - 567 EP - 574 PB - Maney CY - London AN - OPUS4-22238 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger A1 - Wolff, Dietmar T1 - Aspects on Long Term Storage of Used Nuclear Fuel and High Active Waste in Germany T2 - PATRAM 2010 (16th Internationl Symposium on the Packaging and Transport of Radioactive Material) CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-22239 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weber, Mike A1 - Wille, Frank A1 - Ballheimer, Viktor A1 - Musolff, André T1 - From Experiment to an Appropriate Finite Element Model - Safety Assessment for Ductile Cast Iron Casks Demonstrated by means of IAEA Puncture Drop Test T2 - PATRAM 2010 (16th Internationl Symposium on the Packaging and Transport of Radioactive Material) CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-22241 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiegner, Katharina A1 - Hahn, Oliver A1 - Horn, Wolfgang A1 - Mull, Birte A1 - Nohr, Michael A1 - Pyza, Lars A1 - Brödner, Doris A1 - Till, Carola A1 - Kalus, Sabine T1 - Evaluierung von Alternativbaustoffen für die Herstellung emissionsarmer Museumsvitrinen T2 - Workshop: Emissionsarme Museumsvitrinen CY - Frankfurt am Main, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22242 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe A1 - Hielscher, Stefan A1 - Reiners, Georg A1 - Weise, Matthias A1 - Lerche, D. A1 - Rietz, U. T1 - Comparative Study on Bonding and Adhesive Strength Testing vs. Centrifuge Test T2 - 18. Neues Dresdner Vakuumtechnisches Kolloquium (NDVaK) CY - Dresden, Germany DA - 2010-10-21 PY - 2010 AN - OPUS4-22244 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pepke, Lutz-Alexander A1 - Brauser, Stephan A1 - Weber, Gert A1 - Rethmeier, Michael T1 - Einfluss der Schweißanlagenkonfiguration beim Widerstandspunktschweißen T2 - Join-ex 2010 Cengress Center der Messe Wien CY - Vienna, Austria DA - 2010-10-14 PY - 2010 AN - OPUS4-22259 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Raedel, Martina A1 - Bücker, Michael A1 - Reimann, M. A1 - Haber, G. A1 - Baldauf, T. T1 - Anti Corrosion Systems for Iron and Cast Iron Objects T2 - Internationales Kolloquium: Archeological Iron Conservation CY - Stuttgart, Germany DA - 2010-06-24 PY - 2010 AN - OPUS4-22260 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scholz, A. A1 - Nazmy, M. A1 - Fedelich, Bernard A1 - Tinga, T. A1 - Huls, R. T1 - Modelling of microstructure and mechanical property changes in gas turbine alloys T2 - 9th Liège conference: Materials for advanced power engineering 2010 CY - Liège, Belgium DA - 2010-09-27 KW - Nickel base superalloys KW - Degradation KW - Modelling KW - Microstructure KW - Mechanical properties PY - 2010 SP - 567 EP - 587 AN - OPUS4-22261 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Qiao, Linan A1 - Zencker, Uwe A1 - Wille, Frank A1 - Musolff, André T1 - Numerical Simulation of 9 m Drop of a Transport and Storage Cask with Aluminium Impact Limiter T2 - PATRAM 2010, 16th International Symposium on the Packaging and Transport of Radioactive Materials CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-22263 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühn, Hans-Joachim A1 - Aegerter, J. A1 - Frenz, H. T1 - DIN EN ISO 6892-1: 2009 Der Zugversuch: Erste Erfahrungen aus der praktischen Umsetzung der neuen Norm T2 - 28. Vortrags- und Diskussionsveranstaltung Werkstoffprüfung 2010 CY - Neu-Ulm, Germany DA - 2010-12-02 PY - 2010 AN - OPUS4-22264 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Köppen, Robert A1 - Koch, Matthias A1 - Rasenko, Tatjana A1 - Klein-Hartwig, Karin A1 - Bremser, Wolfram A1 - Nehls, Irene T1 - Fusarium mycotoxin CRMs - perfect tools for quality control in food analysis - T2 - Conference in the frame of the 50th Anniversary of the JRC's IRMM CY - Geel, Belgium DA - 2010-11-23 PY - 2010 AN - OPUS4-22265 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bozena, Arnold A1 - Burkert, Andreas A1 - Fischer, Joachim T1 - Bimetallkorrosion an Befestigungselementen für Photovoltaik-Anlagen T2 - AK Korrosion und Korrosionsschutz von Aluminium- und Magnesiumwerkstoffen CY - Hanover, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22318 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Aris, Stephan T1 - Die neue Europäische Richtlinie über ortsbewegliche Druckgeräte - Was kommt, was geht, was bleibt? T2 - 14. Gefahrgutkongress Mecklenburg-Vorpommern CY - Rostock, Germany DA - 2010-10-27 PY - 2010 AN - OPUS4-22319 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Welzel, F. A1 - Grunewald, Thomas A1 - Grätz, Rainer A1 - Beyer, M. A1 - Klages, C.-P. T1 - Zündwirksamkeit mechanisch erzeugter Kurzzeit-Reibfunken T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltschutz CY - Köthen, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-22320 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habib, Abdel Karim A1 - Schalau, Bernd T1 - Erforderliche Komplexität bei der Modellierung einer Lachenverdunstung im Rahmen von Störfallauswirkungsbetrachtungen T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltschutz CY - Köthen, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-22321 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maul, Ronald A1 - Koch, Matthias A1 - Kulling, S. E. A1 - Nehls, Irene T1 - Vergleich von in-vitro-Metabolismusmodellen mit in vivo-Daten am Beispiel der Rotkleeisoflavone T2 - 39. Deutscher Lebensmittelchemikertag CY - Stuttgart, Germany DA - 2010-09-20 PY - 2010 AN - OPUS4-22323 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bonse, Jörn A1 - Krüger, Jörg A1 - Rosenfeld, A. A1 - Stoian, R. A1 - Garrelie, F. A1 - Colombier, J.-P. A1 - Stoian, R. T1 - Nanostructuring of solid surfaces basec on laser-induced periodic surface structures (LIPSS): recent experimental and theoretical approaches T2 - Poster-Session im Rahmen des deutsch-französischen Kolloquiums "French-German Research: 50 years In The Light Of The Laser" CY - Berlin, Germany DA - 2010-11-05 PY - 2010 AN - OPUS4-22324 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bonse, Jörn T1 - Femtosecond laser-induced periodic surface structures T2 - eingeladener Vortrag am Labertoire Hubert Curien Université Jean Monnet Lyon CY - Saint-Étienne, France DA - 2010-11-18 PY - 2010 AN - OPUS4-22325 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völz, Uwe A1 - Kreutzbruck, Marc A1 - Mrasek, Heinz A1 - Heckel, Thomas T1 - Verification of Ultrasonic Field Modeling by Visualization of Wave Propagation in Solids T2 - 8th International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurised Components CY - Berlin, Germany DA - 2010-09-29 PY - 2010 AN - OPUS4-22286 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zerbst, Uwe A1 - Ainsworth, R. A. A1 - Madia, Mauro T1 - Reference load versus limit load in engineering flaw assessment. A proposal for a hybride analysis option T2 - 18th European Conference on Fracture CY - Dresden, Germany DA - 2010-08-30 PY - 2010 AN - OPUS4-22287 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schöne, Dieter A1 - Bork, Claus-Peter T1 - Fatigue investigations of damaged railway rails of profile UIC60 T2 - ECF18 European Conference on Fracture CY - Dresden, Germany DA - 2010-08-30 PY - 2010 AN - OPUS4-22288 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Deubel, Jan A1 - Krüger, Simone A1 - Piechotta, Christian T1 - Chemische Brandanalytik T2 - Workshop 'Brandschutzforschung' CY - Magdeburg, Germany DA - 2010-10-04 PY - 2010 AN - OPUS4-22289 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gook, Sergej A1 - Quiroz Penaranda, Vanessa A1 - Gebhardt, Moritz Oliver A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - HOT CRACKING IN HIGH POWER LASER BEAM WELDING OF THICK HIGH STRENGTH STRUCTURAL STEELS UNDER RESTRAINT CONDITIONS T2 - ICALEO 2010, 29th International Congress on Applications of Lasers & Electro-Optics CY - Anaheim, CA, USA DA - 2010-09-26 PY - 2010 AN - OPUS4-22290 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Töpfer, J. A1 - Mürbe, J. A1 - Kracunovska, S. A1 - Barth, S. A1 - Pawlowski, B. A1 - Rabe, Torsten T1 - Ferrite Materials for Integrated LTCC Modules T2 - Jahrestagung der Amer. Ceramic Society (MST) CY - Houston, TX, USA DA - 2010-10-17 PY - 2010 AN - OPUS4-22291 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kannengießer, Thomas T1 - High Energy Synchrotron Radiation for Investigation of Materials Behaviour during Welding T2 - Material Science Colloquium, University of Pretoria, Southern African Institute of Mining and Metallurgy CY - Pretoria, South Africa DA - 2010-10-01 PY - 2010 AN - OPUS4-22292 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Stefan A1 - Meszaros, R. A1 - Rosemann, Maik A1 - Eberstein, M. A1 - Müller, Ralf A1 - Deubener, J. T1 - Dissolution of Alumina, Sintering and Crystallization in Glass Ceramic Composites for LTCC T2 - Intern. Con. on Glass ICG 2010 CY - Bahia, Brazil DA - 2010-09-20 PY - 2010 AN - OPUS4-22293 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nagamine, K. A1 - Reinsch, Stefan A1 - Müller, Ralf A1 - Honma, T. A1 - Komatsu, T. T1 - Crystallization of Lithium Iron Phosphate Glasses for Lithium Ion Batteries T2 - Intern. Con. on Glass ICG 2010 CY - Bahia, Brazil DA - 2010-09-20 PY - 2010 AN - OPUS4-22294 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gook, Sergej A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - WELD SEAM FORMATION AND MECHANICAL PROPERTIES OF GIRTH WELDS PERFORMED WITH LASER-GMA-HYBRID PROCESS ON PIPES OF GRADE X65 T2 - ICALEO 2010, 29th International Congress on Applications of Lasers & Electro-Optics CY - Anaheim, CA, USA DA - 2010-09-26 PY - 2010 AN - OPUS4-22295 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Jechow, Mirko A1 - Fratzscher, Daniel A1 - Wrobel, Norma A1 - Zscherpel, Uwe A1 - Ewert, Uwe A1 - Bücherl, T. A1 - Weiss, C. A1 - Schillinger, B. A1 - Weiss, P. A1 - Schwabe, A. A1 - Hasenstab, A. T1 - Durchstrahlungsverfahren - ein komplexer Einblick in Objekte, ohne sie zu zerlegen T2 - Archäometrie und Denkmalpflege 2010, Jahrestagung im Deutschen Bergbau-Museum Bochum CY - Bochum, Germany DA - 2010-09-15 PY - 2010 AN - OPUS4-22526 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Ewert, Uwe A1 - Krstelj, V. T1 - EFNDT Arbeitsgruppe 5: ZfP für die öffentliche und technische Sicherheit T2 - DGZfP-Jahrestagung 2010, ZfP in Forschung, Entwicklung und Anwendung CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-22527 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulze, M. A1 - Neugebauer, M. A1 - Meeß, R. A1 - Brzoska, J. A1 - Jung, A. A1 - Staude, Andreas A1 - Ehrig, Karsten T1 - Der Einfluss unterschiedlicher Materialzusammensetzungen auf das dimensionelle Messen von Mikroobjekten mittels Mikro-Computertomographie N2 - Computertomographische Aufnahmen von Objekten mit stark voneinander abweichenden Absorptionseigenschaften stellen sowohl für den Anwendungsbereich der zerstörungsfreien Prüfung als auch für den der dimensionellen Messtechnik eine besondere Herausforderung dar. Die Aufnahmekonfiguration kann bei Objekten dieser Art häufig nicht so gewählt werden, dass die unterschiedlichen Materialeigenschaften mit ausreichender Qualität abgebildet werden können. Aus diesem Grund ist eine objektive Bewertung der Oberflächenmessung mit Hilfe eines in dieser Untersuchung eingeführten Qualitätsmaßes erforderlich. Anhand der in dieser Arbeit vorgestellten Prüfkörperserie soll der Einfluss der Materialzusammensetzung auf das dimensionelle Messen mit CT erfasst und charakterisiert werden. Unter Berücksichtigung der Qualitätsbewertung der Oberflächenpunkte erfolgt die Berechnung der Form- und Abstandsabweichungen. Ziel ist es, die Genauigkeit der Oberflächenmessung hinsichtlich unterschiedlicher Aufnahmeparameter und Materialzusammensetzungen darzustellen. Anhand dieser Ergebnisse ist es möglich, den computertomographischen Aufnahme- und Auswertungsprozess quantitativ zu bewerten und Ursachen der Abweichungen zu diskutieren. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 UR - http://www.ndt.net/article/dgzfp2010/Inhalt/di2a4.pdf SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Di.2.A.4) SP - 1 EP - 9 CY - Berlin AN - OPUS4-22528 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neukamm, M. A1 - Schulze, M. A1 - Staude, Andreas T1 - Untersuchung der geometrischen Eigenschaften industrieller CT mit Hilfe eines neuartigen Prüfkörpers und den Methoden der Photogrammetrie N2 - Anhand des hier vorgestellten zylindrischen Prüfkörpers, an dem Kugeln aus einem Material mit einem hohen Absorptionskoeffizienten und sehr geringen Formabweichungen angebracht wurden, können die geometrischen Eigenschaften von CT-Anlagen untersucht werden. Die Basis der Auswertung bilden die radiometrischen Aufnahmen. Mit Hilfe eines angepassten Ellipsenoperators werden die Mittelpunkte der in den radiometrischen Aufnahmen überlagerungsfrei abgebildeten Kugeln ermittelt. Anhand dieser Mittelpunkte können die geometrischen Eigenschaften des Gesamtsystems zunächst rein an den sich daraus ergebenen Spuren diskutiert und in einem weiteren Schritt photogrammetrisch mit Hilfe der Bündelblockausgleichung ausgewertet werden. Die Untersuchungen zeigen, dass der Prüfkörper geeignet ist, die geometrischen Eigenschaften von CT-Anlagen zu überwachen. In einem weiteren Schritt könnte das vorgestellte Verfahren benutzt werden, um z.B. Abweichungen von Drehtischen zu charakterisieren und ggf. zu korrigieren. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Di.2.A.2) SP - 1 EP - 12 CY - Berlin AN - OPUS4-22529 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Redmer, Bernhard A1 - Malitte, Hans-Joachim A1 - Sölter, B. A1 - Reinhardt, E. A1 - Hacker, R. T1 - Technische und öffentliche Sicherheit von umschlossenen radioaktiven Quellen in der Werkstoffprüfung unter Beachtung nationaler und internationaler Anforderungen N2 - + Der Schutz der Beschäftigen und der Öffentlichkeit und die sichere Handhabung von umschlossenen Quellen in der technischen Radiographie ist durch die Beachtung aller Regeln (Gesetze, Verordnungen und Standards) gewährleistet. + Nach derzeitigem Kenntnisstand sind die dargestellten Maßnahmen für die Gamma- Radiographie aus Sicht der Anwender ausreichend. + Der Standort einer radioaktiven Quelle wird durch ihre Registrierung in das HRQ- Register und bei der örtlichen Regulierungsbehörde sowie durch Anmeldung einer Vor-Ort-Gamma- Radiographie bei der zuständigen Behörde nachvollziehbar. + Safety: Technische Sicherheit umschlossener radioaktiver Quellen ist gesichert durch technische Maßnahmen. + Security: Öffentliche Sicherheit ist gewährleistet durch Genehmigungsverfahren, technische 24 Technische und öffentliche Sicherheit von umschlossenen radioaktiven Quellen in der Werkstoffprüfung Redmer et.al. – DGZfP Jahrestagung 2010, Erfurt, 10.-12. Mai 2010 Regeln, Ausbildung und Training und einem entsprechenden Qualitätsmanagement. + Aus Sicht der nuklearen Gefahrenabwehr wird z.Z. über neue bzw. umfangreichere Maßnahmen zur Sicherheit von umschlossenen Strahlenquellen nachgedacht. Erste Entwürfe bei der IAEA und EU sind im Umlauf bzw. in Diskussion. Mittelfristig wird eine Änderung der StrlSchV dazu erwartet. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Durchstrahlungsverfahren KW - Gamma-Strahler KW - Strahlenschutz KW - Ortsveränderlicher Einsatz PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Mi.2.B.1) SP - 1 EP - 13 CY - Berlin AN - OPUS4-22530 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Moreira, E.V. A1 - Rabello, J.M.B. A1 - Pereira, M.d.S. A1 - Lopes, R.T. A1 - Zscherpel, Uwe T1 - Digital radiography using digital detector arrays fulfills critical applications for offshore pipelines N2 - Digital radiography in the inspection of welded pipes to be installed under deep water offshore gas and oil pipelines, like a presalt in Brazil, in the paper has been investigated. The aim is to use digital radiography for nondestructive testing of welds as it is already in use in the medical, aerospace, security, automotive, and petrochemical sectors. Among the current options, the DDA (Digital Detector Array) is considered as one of the best solutions to replace industrial films, as well as to increase the sensitivity to reduce the inspection cycle time. This paper shows the results of this new technique, comparing it to radiography with industrial films systems. In this paper, 20 test specimens of longitudinal welded pipe joints, specially prepared with artificial defects like cracks, lack of fusion, lack of penetration, and porosities and slag inclusions with varying dimensions and in 06 different base metal wall thicknesses, were tested and a comparison of the techniques was made. These experiments verified the purposed rules for parameter definitions and selections to control the required digital radiographic image quality as described in the draft international standard ISO/DIS 10893-7. This draft is first standard establishing the parameters for digital radiography on weld seam of welded steel pipes for pressure purposes to be used on gas and oil pipelines. KW - Zerstörungsfreie Prüfung von Schweißnähten KW - Durchstrahlungsprüfung KW - Digitale Radiologie PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-225319 DO - https://doi.org/10.1155/2010/894643 SN - 1687-6172 VL - 2010 IS - Article ID 894643 SP - 1 EP - 7 PB - Hindawi Publ. CY - New York, NY, USA AN - OPUS4-22531 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Jechow, Mirko A1 - Fratzscher, Daniel A1 - Wrobel, Norma A1 - Zscherpel, Uwe A1 - Ewert, Uwe A1 - Bücherl, T. A1 - Hasenstab, A. A1 - Weiss, P. A1 - Weiss, C. A1 - Tannert, T. T1 - Strukturmerkmale im Holz - radiologisch gesehen N2 - Die radiologische Untersuchung von Holz ist hinsichtlich der Durchführung und Auswertung komplex. Im Gegensatz zu künstlich hergestellten Materialien zeichnet sich Holz besonders durch seine Heterogenität und Individualität aus, kein Stück ist wie das andere. Dies erschwert bei der radiologischen Inspektion die Fehlerdetektion, da diese teilweise schwer von natürlichen Wachstumsmerkmalen zu unterscheiden sind. Insektenfraßgänge und Hohlräume durch biologischen Abbau sind deutlich erkennbar, schwieriger wird es bei feinen Rissen und Anzeichen für Fäulnis. Metallische Einbauten wie Nägel und Bolzen sind natürlich gut zu erkennen, großflächigere Platten können jedoch den Einblick in die benachbarten Gebiete versperren. Klebstoffschichten sind im Röntgenbild nur dann sichtbar, wenn sie exakt parallel zum Strahlengang getroffen werden. Verschiedene Strukturmerkmale treten also radiologisch recht unterschiedlich in Erscheinung, deshalb liegt es nahe, zu deren Erkennung mehr als nur eine Durchstrahlungstechnologie anzuwenden. Während bei immobilen Objekten, d.h. Bauwerken und Bäumen, mobile Durchstrahlungstechniken mit Röntgen- oder Gammastrahlen (Se-75) in Frage kommen, stehen im Labor auch (schnelle) Neutronen alternativ zur Verfügung. Die verschiedenen Techniken, einschließlich der Tomographie mit Neutronen, werden an zwei größeren Prüfteilen demonstriert, einer Brettschichtholzprobe und einem Knotenpunkt aus einer Holzbrücke mit eingebauter Stahlplatte. Neutronen lassen Materialunterschiede differenzierter hervortreten und durchdringen sperrige Metallteile besser, trotz verringerter Bildqualität. An Verbesserungen wird derzeit gearbeitet. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Mobile Radiographie KW - Holzbauteilprüfung PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Poster 14) SP - 1 EP - 2 CY - Berlin AN - OPUS4-22532 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beckmann, Jörg A1 - von Chrzanowski, Lars A1 - Ewert, Uwe T1 - Time of Flight Diffraction-Technik (ToFD) mit THz-Strahlung zur Untersuchung von Kunststoffobjekten N2 - Als Terahertz-Strahlung bezeichnet man eine elektromagnetische Strahlung im Frequenzbereich zwischen 0.3 und 6 THz. Sie ist zwischen der Mikrowellen- und der Infrarotstrahlung eingeordnet und steht erst seit einigen wenigen Jahren infolge der Entwicklung von effizienten THz-Systemen für Untersuchungen im Labormaßstab zur Verfügung. Weit verbreitet ist heutzutage die THz-Spektroskopie (Time-Domain Spectroscopy, TDS) und THz – Bildgebung (THz-Imaging). Die THz-Strahlung hat wesentliche Vorteile für die Materialuntersuchung und - charakterisierung. Sie ist nicht ionisierend und verfügt über eine vergleichsweise große Eindringtiefe bei vielen nichtleitenden optisch opaquen Materialien. Verpackungsmaterialen wie z.B. Papier, Kunststoffe, Keramiken und am menschlichen Körper getragene Kleidungsstücke erscheinen im Wellenlängenbereich der THz Strahlung transparent. Unterschiedliche Materialien, wie z.B. Sprengstoffe oder Drogen zeigen im THz-Spektrum infolge kollektiver molekularer Anregungsmechanismen im Material charakteristische Absorptionsbereiche, die als 'Fingerprints' in der Pharmazie oder bei der Kriminalitätsbekämpfung zu deren Identifizierung verwendet werden. Beim THz-Imaging wird die Probe z.B. mit Hilfe eines fokussierten THz-Strahls berührungslos abgetastet, um Reflexions- oder Transmissionseigenschaften (Amplitude, Zeitverzögerung, spektrale Information) ortsaufgelöst zweidimensional zu detektieren. Sowohl das THz-Imaging als auch die THz-Spektroskopie weisen ein hohes Anwendungspotential für die berührungslose zerstörungsfreie Werkstoffprüfung von Kunststoffen, Glasfaser-Verbundstoffen oder Keramiken auf. Die ortsaufgelöste Messung der Feuchte in einem Bauteil, der Nachweis von Defekten oder von Einschlüssen im Probeninneren oder die Delaminationsvorgänge in Verbundwerkstoffen sind beispielgebend genannte Anwendungsmöglichkeiten. Die Auflösung lag dabei, bedingt durch die Wellenlänge der THz-Strahlung, im Millimeter-Bereich und ist somit vergleichbar mit der typischen Wellenlänge bei Ultraschalluntersuchungen. Die BAM verfügt über ein glasfasergekoppeltes Picometrix T-Ray 2000 System, mit dem durch die Integration eines Mehrkreisgoniometers der THz-Sender, THz-Detektor und der Probenkörper beliebig und unabhängig voneinander positioniert werden können. Bei getrennter V-förmige Reflexanordnung der Sende- und Empfangsantenne (z. B. 45º) in Bezug zur Oberflächennormale des Prüfgegenstandes können z.B. Risse, Bohrungen oder Kerben, die sich im Inneren des „beleuchteten“ Probenvolumens befinden, nachgewiesen werden, weil die eingelagerten Inhomogenitäten sowohl eine zusätzlich Reflexion als auch eine Beugung des THz – Pulses verursachen. Charakteristisches Merkmal von TOFD (Beugungslaufzeitmethode) ist die Nutzung der von den Fehlerrändern verursachten (schwachen) Beugungssignale zur Bildgebung. Damit bietet TOFD in Analogie zum gleichnamigen Ultraschallprüfverfahren generell nicht nur die Möglichkeit zum Fehlernachweis, sondern vor allem auch die der Fehlergrößenbestimmung und Fehlerlage. Der Beitrag zeigt, wie mit Hilfe der Time of Flight - Diffractions - Technik künstlich in Kunststoffkörper eingebrachte Fehlstellen berührungslos nachgewiesen und deren laterale Ausdehnungen bestimmt werden können. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Time of flight diffraction (ToFD) KW - Terahertz KW - Kunststoffe PY - 2010 UR - http://www.ndt.net/article/dgzfp2010/Inhalt/p35.pdf SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Poster 35) SP - 1 EP - 2 CY - Berlin AN - OPUS4-22533 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beckmann, Jörg A1 - Przybilla, Waldemar A1 - Redmer, Bernhard A1 - Ewert, Uwe A1 - Rachny, S. A1 - Ochsenfarth, B. A1 - Krull, R. T1 - Durchstrahlungsprüfung aluminothermischer Schweißungen von verlegten Schienen mit Hilfe von Speicherfoliensystemen N2 - Speicherfoliensysteme werden seit den 80-iger Jahren in der Röntgendiagnostik eingesetzt. Die technische Modifizierung der anfänglich im medizinischen Bereich genutzten Speicherfoliensysteme ermöglichte die Einführung der Computer-Radiographie (CR) in die Digitale Industrielle Röntgenprüfung mit dem Ziel des Filmersatzes. Die Speicherfolien detektieren im Vergleich zum Röntgenfilm einen wesentlich größeren Dosisbereich. Die daraus resultierende Dynamik befähigt die Speicherfoliensysteme zur Abbildung eines großen Objektumfanges und verringert zugleich das Risiko einer Fehlbelichtung. Vor allem die Möglichkeit, unmittelbar nach dem Belichten das virtuell im Speicherleuchtstoff gespeicherte Durchstrahlungsbild auszulesen, in digitalisierter Form im PC zu speichern und auf dem Bildschirm betrachten zu können, verdeutlicht die Vorteile von CR Systemen beim Gebrauch in der Durchstrahlungsprüfung. Eine vollständige Ablösung des Röntgenfilmes durch digitale Techniken ist jedoch erst dann zu erwarten, wenn es gelingt, eine Bildqualität zu erreichen, die besser oder gleichwertig zu der vom jeweiligen Röntgenfilmsystem geforderten ist. Mit diesem Ziel hat in den letzten Jahren eine technische Weiterentwicklung von CR Systemen für den industriellen Einsatz stattgefunden. Im gleichen Zeitraum wurden mehrere Standards zur Bewertung von CR Systemen und zu deren richtigen Gebrauch in der Durchstrahlungsprüfung entwickelt. Heutzutage ist die Herstellung von Durchstrahlungsbildern mit einer entsprechend gewünschten Bildgüte sichergestellt, was in den letzten Jahren zum verstärkten Einsatz von CR Systemen in der Durchstrahlungsprüfung führte. Im Rahmen einer von der EU finanzierten Studie (Filmfree) wurden anfänglich systematische Untersuchungen zu den Einsatzmöglichkeiten und –grenzen von CR Systemen für die Durchstrahlungsprüfung von aluminothermischen Schweißnähten in Schienen durchgeführt. Anhand der Ergebnisse ließen sich optimale Bedingungen und Strategien für die Durchstrahlungsprüfung von Schienen ableiten, die anschließend im vor Ort Einsatz auf der Teststrecke der Deutschen Bahn verifiziert wurden. Im vorgestellten Beitrag werden die Vorteile des Einsatzes von CR Systemen bei der Durchstrahlungsprüfung von aluminothermischen Schweißnahtverbindungen dargestellt und deren Verwendung unter realen Verkehrsbedingungen im Schienenverkehr beschrieben. Es wird gezeigt, wie unter den bestehenden Fahrbetriebsbedingungen die Durchstrahlungsprüfung von Schweißungen in verlegten Schienen umgesetzt werden kann. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Digital radiography KW - Computed radiography KW - Image quality KW - Speicherfolien KW - Schienenprüfung PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Di.1.A.1) SP - 1 EP - 16 CY - Berlin AN - OPUS4-22534 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Ewert, Uwe A1 - Krstelj, V. T1 - EFNDT Arbeitsgruppe 5: ZfP für die öffentliche und technische Sicherheit N2 - Die Arbeitsgruppe 5 'Public Security and Safety NDT Technologies (PSSndtT)' der Europäischen Föderation für Zerstörungsfreie Prüfung (EFNDT) hat sich zur Aufgabe gestellt, vorhandene ZfP-Techniken darauf hin zu überprüfen, ob und inwieweit sie für einen Einsatz im Bereich der öffentlichen Sicherheit ('Security') geeignet sind. Ausgangspunkt war die Suche nach Antipersonenminen in ehemaligen Kriegsgebieten. Die zunehmende Bedrohung der Allgemeinheit durch den Terrorismus veranlasste den EFNDT, ZfP-Anwendungen auf die allgemeine öffentliche Sicherheit auszuweiten. Der Blick auf die Praxis und die Erfahrungen in der ZfP kann neue Wege eröffnen und erspart mögliche parallele Eigenentwicklungen. Umgekehrt wird man immer auch vom praktischen Feldeinsatz mobiler Inspektionstechnik lernen, besonders unter erschwerten Einsatzbedingungen in Bezug auf erschwerte Zugänglichkeit und eingeschränkt verfügbare Zeitrahmen. Es wird über die bisherigen Aktivitäten und Perspektiven berichtet. Ein gemeinsames Anliegen sowohl der technischen Sicherheit im Sinne von 'Safety' als auch der öffentlichen im Sinne von 'Security' als Schutz vor Anschlägen und Verbrechen ist die Einschätzung bzw. die Bewertung vorbeugender Maßnahmen, die der rechtzeitigen Erkennung einer Bedrohung dienen. An einem Beispiel soll gezeigt werden, wie umgekehrt die ZfP auch von Konzepten zur Maßnahmenbewertung in Sicherheitskontrollen profitieren könnte, besonders dann, wenn eine einzelne Methode nicht hinreicht, um ein drohendes Schadensereignis zu erkennen. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Mobile Radiographie KW - Neutronentomographie KW - Archäologischer Nassholzfund PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Poster 15) SP - 1 EP - 8 CY - Berlin AN - OPUS4-22535 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Schickert, M. A1 - Krause, Martin ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Ultrasonic techniques for evaluation of reinforced concrete structures KW - Ultrasonics KW - Elastic wave propagation KW - Flaw detection KW - SAFT reconstruction KW - Post-tensioned concrete structures PY - 2010 SN - 978-1-84569-950-5 VL - 2 IS - Chapter 22 SP - 490 EP - 530 PB - Woodhead Publ. AN - OPUS4-22546 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Kind, Thomas A1 - Stoppel, Markus A1 - Kurz, J.H. ED - Gieler-Breßmer, S. T1 - Zuverlässige Bewehrungsortung: Vom klassischen Handgerät zum automatisierten Bauwerkscanner T2 - 8. Symposium "Kathodischer Korrosionsschutz von Stahlbetonbauwerken" CY - Ostfildern, Deutschland DA - 2010-11-18 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Kathodischer Korrsoionsschutz KW - Ortung von Bewehrung KW - Wirbelstrom KW - Radar KW - Ultraschallecho PY - 2010 SN - 3-924813-88-4 SP - 21 EP - 33 AN - OPUS4-22547 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friese, Martin A1 - Helmerich, Rosemarie A1 - Effner, Ute A1 - Mielentz, Frank ED - Frangopol, D. ED - Sause, R. ED - Kusko, C. T1 - Capabilities of non-destructive testing of RC structures - quality assurance for crack repair using ultrasonic echo T2 - IABMAS 2010 - Bridge maintenance, safety, management and life-cycle optimization CY - Philadelphia, PA, USA DA - 2010-07-11 KW - Zerstörungsfreie Prüfung KW - Ultraschall KW - Risse KW - Erfolgskontrolle Rissinjektion PY - 2010 SN - 978-0-415-87786-2 SP - 1524 EP - 1531 PB - CRC Press AN - OPUS4-22548 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friese, Martin A1 - Roder, C. A1 - Effner, Ute A1 - Mielentz, Frank T1 - Quality control for crack repair - a new approach using ultrasonic imaging T2 - NDE/NDT for highways and bridges - Structural materials technology CY - New York, NY, USA DA - 2010-08-16 KW - Zerstörungsfreie Prüfung KW - Ultraschall KW - Risse KW - Erfolgskontrolle Rissinjektion PY - 2010 SN - 978-1-57117-211-2 SP - 374 EP - 382 AN - OPUS4-22549 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friese, Martin A1 - Effner, Ute A1 - Nowak, Thomas Rudolf A1 - Mielentz, Frank T1 - Erfolgskontrolle von Rissinjektionen durch Ultraschallmessungen T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - Zerstörungsfreie Prüfung KW - Ultraschall KW - Risse KW - Erfolgskontrolle Rissinjektion PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 (Poster 05) SP - 1 EP - 10 CY - Berlin AN - OPUS4-22550 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pretsch, Thorsten T1 - Durability of a polymer with triple-shape properties N2 - A series of cyclic thermo-mechanical measurements was conducted on segregated poly(ester urethane) to study substantial changes in triple-shape properties as a result of hydrolytic aging (80 °C). Prior to the analysis of aging effects, a concept of triple-shape testing was elaborated, starting with the implementation of two distinct programming units. The first one included a deformation at 60 °C to εm1 = 100% (temporary shape B) and its fixing through soft segment crystallization by cooling to -20 °C under constant strain. The second one consisted of a deformation at -20 °C to εm2 = 200% (temporary shape A) and its stabilization through soft segment vitrification as achieved by cooling to -60 °C under fixed strain constraint. Then, gradual heating of the polymer from below to above its thermal transition temperatures gave two independent shape recovery responses in the reverse order of shape fixing: A → B through passing the glass transition by heating from -60 to 23 °C and B → C (back to the permanent shape), when heating the material from 23 to 60 °C and thus above its soft segment melting temperature. In a progressive approach, the storage of loading history through the sequential fixing of two temporary shapes was proven by the development of shape recovery stresses under constrained environment. With the implementation of the two testing methods several aging-related effects could be detected. Good shape fixing abilities ≥90% for both shapes were found and contrasted by significant changes in shape recoverabilities and stress storage capacities. Further insights derived from differential scanning calorimetry (DSC) measurements, indicating an aging-related growth in soft segment crystallinity, and dynamic mechanical analysis (DMA), suggesting a plasticizer effect of water onto the polymer matrix and that aging favoured an increase in cross-linking density. KW - Triple-shape polymer KW - Shape memory polymer KW - Tandem shape memory polymer KW - Active polymer KW - Poly(ester urethane) KW - Durability PY - 2010 DO - https://doi.org/10.1016/j.polymdegradstab.2010.07.037 SN - 0141-3910 SN - 1873-2321 VL - 95 IS - 12 SP - 2515 EP - 2524 PB - Applied Science Publ. CY - London AN - OPUS4-22551 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Witt, Jens A1 - Narbonneau, F. A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - De Jonckheere, J. A1 - Jeanne, M. A1 - Kinet, D. A1 - Paquet, B. A1 - Depré, A. A1 - D´Angelo, L.T. A1 - Thiel, T. A1 - Logier, R. ED - Santos, J.L. ED - Culshaw, B. ED - López-Higuera, J.M. ED - MacPherson, W.N. T1 - Smart medical textiles with embedded optical fibre sensors for continuous monitoring of respiratory movements during MRI N2 - We report on three respiration sensors based on pure optical technologies developed during the FP6 EU project OFSETH. The developed smart medical textiles can sense elongation up to 3%, while maintaining the stretching properties of the textile substrates for a good comfort of the patient. The sensors, based on silica and polymer fibre, are developed for monitoring of patients during MRI examination. The OFSETH harness allows a continuous measurement of respiration movements while all vitals organs are free for medical staff actions. The sensors were tested in MRI environment and on healthy adults. T2 - 4th European workshop on optical fibre sensors CY - Porto, Portugal DA - 2010-09-08 KW - Respiratory sensor KW - Fibre optic sensor KW - Optical time-domain reflectometry (OTDR) KW - MRI KW - Smart textile KW - Healthcare monitoring KW - Fibre Bragg grating (FBG) PY - 2010 SN - 978-0-8194-8083-5 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 7653 SP - Paper 115, 76533B-1 - 76533B-4 PB - SPIE, the International Society for Optical Engineering CY - Bellingham, Wash. AN - OPUS4-22552 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Witt, Jens A1 - Steffen, Milan A1 - Schukar, Marcus A1 - Krebber, Katerina ED - Santos, J.L. ED - Culshaw, B. ED - López-Higuera, J.M. ED - MacPherson, W.N. T1 - Investigation of sensing properties of long period gratings based on microstructured polymer optical fibres N2 - We investigated the sensing properties of a single mode Poly Methyl Methacrylate (PMMA) Microstructured Polymer Optical Fibre (MPOF) with mechanically imprinted Long Period Grating (LPG). We measured the influence of strain to the LPG wavelength which showed the viscoelastic nature of PMMA. We also measured the influence of temperature and humidity to the LPG wavelength. T2 - 4th European workshop on optical fibre sensors CY - Porto, Portugal DA - 2010-09-08 KW - Microstructured polymer optical fibre KW - Long period grating KW - Strain sensor KW - Humidity sensor KW - Temperature sensor PY - 2010 SN - 978-0-8194-8083-5 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 7653 SP - Paper 112, 76530I-1 - 76530I-4 PB - SPIE, the International Society for Optical Engineering CY - Bellingham, Wash. AN - OPUS4-22553 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Winkler, T. A1 - Hoenig, E. A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Fritsch, D. A1 - Janssen, R. A1 - Morlock, M.M. A1 - Schilling, A.F. T1 - Volumetric analysis of osteoclastic bioresorption of calcium phosphate ceramics with different solubilities N2 - Commonly, to determine osteoclastic resorption of biomaterials only the resorbed area is measured. The depth of the resorption pit, however, may also be important for the performance of a material. To generate such data we used two calcium phosphate ceramics (Ca10 and Ca2). The solubility of the materials was determined according to DIN EN ISO 10993-14. They were scanned three-dimensionally using infinite focus microscopy and subsequently cultivated for 4 weeks in simulated body fluid without (control) or with human osteoclasts. After this cultivation period osteoclasts number was determined and surface changes were evaluated two- and three-dimensionally. Ca10 and Ca2 showed solubilities of 11.0 ± 0.5 and 23.0 ± 2.2 mg g-1, respectively. Both materials induced a significant increase in osteoclast number. While Ca10 did not show osteoclastic resorption, Ca2 showed an increased pit area and pit volume due to osteoclastic action. This was caused by an increased average pit depth and an increased number of pits, while the average area of single pits did not change significantly. The deduced volumetric osteoclastic resorption rate (vORR) of Ca2 (0.01–0.02 µm3 µm-2 day-1) was lower than the remodelling speed observed in vivo (0.08 µm3 µm-2 day-1), which is in line with the observation that implanted resorbable materials remain in the body longer than originally expected. Determination of volumetric indices of osteoclastic resorption might be valuable in obtaining additional information about cellular resorption of bone substitute materials. This may help facilitate the development of novel materials for bone substitution. KW - Biodegradation KW - Surface analysis KW - Simulated body fluid KW - Osteoclasts KW - Calcium phosphate ceramics PY - 2010 DO - https://doi.org/10.1016/j.actbio.2010.04.015 SN - 1742-7061 VL - 6 IS - 10 SP - 4127 EP - 4135 PB - Elsevier CY - Amsterdam AN - OPUS4-22554 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schalau, Bernd T1 - VDI Richtlinie 3783 Blatt 1; Ausbreitung von störfallbedingten Freisetzungen - Sicherheitsanalyse T2 - DECHEMA Fortbildung: Stoff- und Energiefreisetzungen in der Sicherheitstechnik CY - Frankfurt am Main, Germany DA - 2010-11-25 PY - 2010 AN - OPUS4-22555 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beckmann, Jörg A1 - Zscherpel, Uwe A1 - Ewert, Uwe A1 - Skerik, M. T1 - Image Quality Assessment of CR Systems N2 - Computed Radiography exposure experiments on welded plate sections were performed to demonstrate that the requirements for pressure vessels weld inspection according to EN1435 or EN14784-2 class B can be achieved. The representative comparative studies of the image qualities were performed with standardized image quality indicators and image evaluation procedures on both film and digital radiographs. Recommendations for weld inspections with CR systems are drawn from the results. It is demonstrated that present CR systems can be used for weld inspection and produce images with testing class B if the selected X-ray tube voltage is reduced compared with the max. voltage of EN 14784-2 and set equivalent to maximum X-ray voltage values for steel as defined in the radioscopic standard EN 13068-3. The work was part of the European 'Filmfree' Project promoted during the 6’th framework. T2 - 10th European conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 KW - Film KW - Digital radiography KW - Computed radiography KW - Image quality PY - 2010 UR - http://www.ndt.net/article/ecndt2010/reports/1_04_07.pdf IS - Paper 4.02.18 SP - 1 EP - 10 AN - OPUS4-22536 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, A. A1 - Osterloh, Kurt ED - Michaelsen, H. T1 - Ohne Schäden in die Tiefe - Zerstörungsarme und zerstörungsfreie Verfahren zur Untersuchung von Holz KW - Diaphragm for high energy radiation KW - X-ray backscatter technology KW - Unilateral access KW - Security application PY - 2010 SN - 978-3-86568-462-2 SP - 474 EP - 479 PB - Michael Imhof AN - OPUS4-22537 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ewert, Uwe A1 - Bavendiek, K. A1 - Robbins, J. A1 - Zscherpel, Uwe A1 - Bueno, C. A1 - Gordon, T. A1 - Mishra, D. T1 - New compensation principles for enhanced image quality in industrial radiology with digital detector arrays KW - Radiography KW - Film replacement KW - Digital detector arrays KW - Contrast sensitivity KW - SNR KW - CNR KW - Spatial resolution KW - Bad pixels KW - Standards KW - Compensation principles PY - 2010 SN - 0025-5327 VL - 68 IS - 2 SP - 163 EP - 168 PB - Society for Nondestructive Testing CY - Columbus, Ohio AN - OPUS4-22538 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Jechow, Mirko A1 - Fratzscher, Daniel A1 - Wrobel, Norma A1 - Zscherpel, Uwe A1 - Ewert, Uwe A1 - Bücherl, T. A1 - Schillinger, B. A1 - Schwabe, A. A1 - Hasenstab, A. A1 - Weiss, P. A1 - Weiss, C. A1 - Tannert, T. T1 - Durchstrahlungsverfahren - Ein komplexer Einblick in Objekte, ohne sie zu zerlegen T2 - Jahrestagung Archäometrie und Denkmalpflege 2010 CY - Bochum, Deutschland DA - 2010-09-15 KW - Mobile Radiographie KW - Neutronentomographie KW - Archäologischer Nassholzfund PY - 2010 SN - 0947-6229 IS - Metalla Sonderheft SP - 52 EP - 54 CY - Bochum AN - OPUS4-22539 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gula, Michal A1 - Steinbach, J. A1 - Holtappels, Kai A1 - Acikalin, Hatice Aydan A1 - Schildberg, H.-P. A1 - Kobiera, A. T1 - Apparative Einflüsse auf den explosionsartigen Zerfall von chemisch instabilen Gasen T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Explosion KW - Chemisch instabil KW - Volumeneinfluss PY - 2010 SN - 978-3-89746-119-2 IS - P-16 SP - 1 EP - 9 CY - Frankfurt/M. AN - OPUS4-22540 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Perret, William A1 - Thater, R. A1 - Alber, U. A1 - Schwenk, Christopher A1 - Rethmeier, Michael T1 - Case study for welding simulation in the automotive industry T2 - INPRO - Intermediate meeting - IIW-Select committee "automotive and road transport" DA - 2010-04-21 KW - Welding simulation KW - Temperature field KW - Distortion KW - Automotive industry KW - Experimental validation PY - 2010 IS - IIW-Doc. No. SC-Auto-37-10 SP - 1 EP - 13 AN - OPUS4-22541 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Taffe, Alexander A1 - Wiggenhauser, Herbert T1 - Zerstörungsfreie Prüfverfahren im Bauwesen - ein Überblick T2 - Vorlesung zu Grundlagen der zerstörungsfreien Prüfung im Bauwesen (ZfPBau) in Rahmen der Fachtagung Bauwerksdiagnose CY - Berlin, Germany DA - 2010-02-18 PY - 2010 AN - OPUS4-22545 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schalau, Bernd T1 - Freistrahlmodell im Vergleich T2 - DECHEMA Fortbildung: Stoff- und Energiefreisetzungen in der Sicherheitstechnik CY - Frankfurt am Main, Germany DA - 2010-11-25 PY - 2010 AN - OPUS4-22556 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Ferrero, Fabio T1 - Vermeidung der Brandentstehung bei der Lagerung von Biomasse T2 - VDI-Fachtagung "Sichere Handhabung brennbarer Stäube" CY - Nuremberg, Germany DA - 2010-11-16 PY - 2010 AN - OPUS4-22557 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friese, Martin A1 - Helmerich, Rosemarie A1 - Effner, Ute A1 - Mielentz, Frank T1 - Capabilities of non-destructive testing of RC structures - quality assurance for crack repair using ultrasonic echo T2 - IABMAS2010, Bridge Maintenance, Safety, Management and Life-Cycle Optimization CY - Philadelphia, PA, USA DA - 2010-07-11 PY - 2010 AN - OPUS4-22558 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friese, Martin A1 - Roder, C. A1 - Effner, Ute A1 - Mielentz, Frank T1 - Quality Control for Crack Repair - A New Approach Using Ultrasonic Imaging T2 - NDE/NDT for Highway & Bridges: SMT 2010 CY - New York City, NY, USA DA - 2010-08-16 PY - 2010 AN - OPUS4-22559 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friese, Martin A1 - Effner, Ute A1 - Nowak, Thomas Rudolf A1 - Mielentz, Frank T1 - Erfolgskontrolle von Rissinjektionen durch Ultraschallmessungen T2 - Fachtagung Bauwerksdiagnose CY - Berlin, Germany DA - 2010-02-18 PY - 2010 AN - OPUS4-22560 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Jung, S. A1 - Renz, F. A1 - Klein, M. A1 - Menzel, Michael A1 - Boca, R. A1 - Stößer, R. T1 - Molecular switching in iron complexes bridged via tincyanides observed by Mössbauer and ESR spectroscopy N2 - The precursor [FeIII(L)Cl] (LH2 = N,N'-bis(2'-hydroxy-3'-X-benzyliden)-1,6-diamino-3-N-hexane) is a high-spin (S = 5/2) complex (with X = -CH3, -O-CH3). This precursor is combined with the bridging unit [SnIV(CN)4] to yield star-shaped pentanuclear clusters, [(L-X-FeIII)4Sn(CN)4]Cl4 57Fe-Mössbauer, 119mSn-Mössbauer, and ESR spectroscopy are used to study our samples. For X = -CH3 the 57Fe-Mössbauer data show a multiple spin transition between iron(III) in the high-spin and low-spin state. Changing the functional group from X = -CH3 to X = -O-CH3 turns the switchability off. KW - Switching iron complexes KW - Spin-transition KW - Mössbauer spectroscopy KW - ESR-spectroscopy PY - 2010 DO - https://doi.org/10.1088/1742-6596/217/1/012027 SN - 1742-6588 SN - 1742-6596 VL - 217 IS - 1 / 012027 SP - 1 EP - 6 PB - IOP Publ. CY - Bristol, UK AN - OPUS4-22561 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosner, Martin A1 - Vogl, Jochen T1 - Three new offset delta-11-B isotope reference materials T2 - 22. ICP-MS Anwendertreffen CY - Berlin, Germany DA - 2010-09-06 PY - 2010 AN - OPUS4-22565 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beckmann, Jörg A1 - Zscherpel, Uwe A1 - Ewert, Uwe A1 - Skerik, Michael T1 - Image Quality Assessment of CR Systems T2 - 10th European Conference on Non-Destructive Testing CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-22506 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt T1 - Durchstrahlungsprüfungen von Holz und Kunstwerken T2 - Konservierungswissenschaft im Dialog 2010, öffentliche Vortragsreihe des Rathgen-Forschungslabors CY - Berlin, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22507 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina A1 - Bertovic, Marija A1 - Pavlovic, Mato A1 - Kanzler, Daniel A1 - Rosenthal, Martina A1 - Pitkänen, J. A1 - Ronneteg, U. T1 - Progress in Evaluating the Reliability of NDE Systems - Paradigm Shift N2 - The paper will give an overview of new methodology for evaluating the reliability of NDE systems accurately, reliably and efficiently in accordance with the specific requirements of industrial application. After a review of the substantive issues from the status in 2002, the go forward guidance from these interactions is considered. At the beginning of the reliability analysis, the actual safety demands have to be defined in order to fit the investigation to the level of risk when the component would fail. Next, all the essential influencing parameters need to be documented and transferred to an appropriate design of experiments (DOE) to determine the reliability in terms of a qualitative assessment for lower risk or in terms of a quantitative probability of detection (POD) or ROC (Receiver Operating Characteristics) curves for higher safety demands. A new paradigm is offered to consider the POD or reliability of the system as a function of the configuration of input variables and use it for optimisation rather than for a final judgement. An advantage for the end user is also to sample all single PODs to an integral “Volume POD” of a part. Among the influencing parameters, the human factor is the most important one. A systematic psychological approach shall help to find out where the bottlenecks are but most importantly to provide best possible working conditions for the human inspectors. T2 - 8th International Conference on NDE in Relation to Structural Integrity of Nuclear an Pressurised Components CY - Berlin, Germany DA - 2010-09-29 PY - 2010 UR - http://www.ndt.net/article/jrc-nde2010/papers/34.pdf AN - OPUS4-22508 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kanzler, Daniel A1 - Milsch, Steffen A1 - Pavlovic, Mato A1 - Müller, Christina A1 - Pitkänen, J. T1 - Concept of total reliability of NDT methods for inspection of the EB weld of the copper canister used for a long-term storage of spent nuclear fuel T2 - 8th International Conference on NDE in Relation to Structural Integrity for Nuclear an Pressurised Components CY - Berlin, Germany DA - 2010-09-29 PY - 2010 AN - OPUS4-22509 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zur, Malte T1 - Numerische Untersuchung der Kabinenluftströmungen in Flugzeugfrachträumen - Darstellung des Dissertationsvorhabens T2 - Seminar Strömungs- und Energietechnik, Uni Rostock, Fakultät für Maschinenbau und Schiffstechnik, Lehrstuhl Strömungsmechanik CY - Rostock, Germany DA - 2010-11-12 PY - 2010 AN - OPUS4-22510 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beckmann, Jörg A1 - Redmer, Bernhard A1 - Przybilla, Waldemar A1 - Ewert, Uwe A1 - Rachny, Sigfried A1 - Ochsenfarth, Bela A1 - Krull, Ronald T1 - Durchstrahlungsprüfung aluminothermischer Schweißungen von verlegten Schienen mit Hilfe von Speicherfoliensystemen T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-22511 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Fratzscher, Daniel A1 - Zscherpel, Uwe A1 - Ewert, Uwe A1 - Schillinger, Burkhard A1 - Schwabe, Andreas T1 - Radiography and partial tomography of wood with thermal neutrons T2 - 9th World Conference on Neutron Radiography CY - Rustenburg, South Africa DA - 2010-10-03 PY - 2010 AN - OPUS4-22512 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Staude, Andreas A1 - Müller, Katharina A1 - Goebbels, Jürgen A1 - Riesemeier, Heinrich A1 - Reiche, I. A1 - Large, D. T1 - Synchrotron radiation micro x-ray tomography - a useful tool for the identification of prehistoric bone materials T2 - "SR2A - Synchroton Radiation in Art an Archaeometry" CY - Amsterdam, Netherlands DA - 2010-11-07 PY - 2010 AN - OPUS4-22513 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altindis, M. A1 - Krupp, U. A1 - Ohrndorf, A. A1 - Christ, H.-J. A1 - Hagemann, K. A1 - Bühring-Polaczek, A. A1 - Ploska, Ute A1 - Berger, Georg A1 - Sommer, U. T1 - Development and Characterization of Open-cell Ti6Al7Nb Implant Structures for Bone Replacement T2 - MSE Materials Science and Engineering CY - Darmstadt, Germany DA - 2010-08-24 PY - 2010 AN - OPUS4-22514 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knabe, Ch. A1 - Berger, Georg A1 - Gildenhaar, Renate A1 - Houshmand, A. A1 - Müller-Mai, Ch. A1 - Jörn, Daniela A1 - Stiller, M. T1 - Effect of resorbable calcium-alkali-orthophosphate bone substitute cements on osteogenesis after implantation in the rabbit femur T2 - Transaction 36th Annual Meeting of the Soc. for Biomaterials USA CY - Seattle, WA, USA DA - 2010-04-21 PY - 2010 AN - OPUS4-22515 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klobes, Peter A1 - Prinz, Carsten A1 - Zimathies, Annett T1 - 15 Years Development and Certification of Porous Reference Materials at BAM T2 - XV. POROTEC-Workshop über die Charakterisierung von feinteiligen und porösen Festkörpern CY - Bad Soden, Germany DA - 2010-11-16 PY - 2010 AN - OPUS4-22566 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klobes, Peter A1 - Zimathies, Annett A1 - Prinz, Carsten T1 - Porous CRM of BAM - An Overview T2 - XV. POROTEC-Workshop über die Charakterisierung von feinteiligen und porösen Festkörpern CY - Bad Soden, Germany DA - 2010-11-16 PY - 2010 AN - OPUS4-22567 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Success project in EraSME: The UNACON project T2 - Kolloquium "EraSME/CORNET Partnering Event" CY - Hanover, Germany DA - 2010-04-21 PY - 2010 AN - OPUS4-22569 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schoßig, Jörg A1 - Schmidt, Martin A1 - Krause, Ulrich A1 - Steinbach, J. T1 - Beurteilung des Selbstentzündungsverhaltens brennbarer Stäube mit Hilfe der adibaten Warmlagerung T2 - 10. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-22570 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe A1 - Baier, Jennifa T1 - Imaging und Mapping von Oberflächen und Schichten in der Materialforschung und -prüfung T2 - Anwenderseminar IR-Bildgebung CY - Ettlingen, Germany DA - 2010-11-22 PY - 2010 AN - OPUS4-22571 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiedenbeck, M. A1 - Rosner, Martin A1 - Halama, R. A1 - Krienitz, M. T1 - Tourmaline reference materials for the in situ determination of lithium isotope composition T2 - 22. ICP-MS Anwendertreffen CY - Berlin, Germany DA - 2010-09-06 PY - 2010 AN - OPUS4-22572 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bonse, Jörn A1 - Rosenfeld, A. A1 - Krüger, Jörg T1 - Femtosecond laser-induced periodic surface structures: recent approaches to explain their sub-wavelength periodicities T2 - International Conference on Lasers, Applications and Technologies, ICONO/LAT 2010 Symposium 2 Laser-assisted Micro- and Nanotechnologies, LAT 2010 CY - Kazan, Russia DA - 2010-08-23 PY - 2010 AN - OPUS4-22573 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Jörg T1 - Mikrobearbeitung mit ultrakurzen Laserimpulsen T2 - Seminar Laser-Materialbearbeitung für die industrielle Fertigung (Photon Laser Engineering) CY - Berlin, Germany DA - 2010-03-23 PY - 2010 AN - OPUS4-22574 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scheid, Marc T1 - Staubexplosionsgefahren bei der Oberflächenbearbeitung von Metallen und Leichtmetallen T2 - Arbeitsschutztagung im Haus der Technik CY - Essen, Germany DA - 2010-01-21 PY - 2010 AN - OPUS4-22576 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scheid, Marc T1 - Sichere Handhabung brennbarer Stäube - Explosionsgefahren insbesondere bei Metallstäuben - Beispiele für Schutzmaßnahmen T2 - Seminar "Brand- und Explosionsschutz" der Metall-Berufsgenossenschaften CY - Schierke, Germany DA - 2010-09-01 PY - 2010 AN - OPUS4-22577 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scheid, Marc A1 - Krietsch, Arne T1 - Tests on suitable of a new pyrotechnical igniter for the determination of explosion characteristics of dust clouds in 20-L-sphere and 1m^3-vessel T2 - Eighth International Symposium on Hazards, Prevention and Mitigation of Industrial Explosions (8th ISHPMIE) CY - Yokohama, Japan DA - 2010-09-05 PY - 2010 AN - OPUS4-22578 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scheid, Marc A1 - Schmidt, Martin A1 - Lohrer, Christian T1 - Sichere Handhabung brennbarer Stäube - Übersichtsvortrag - Explosionsschutz bei Stäuben T2 - Seminar "Grundlagen und rechtliche Anforderungen des Explosionsschutzes" der DECHEMA CY - Frankfurt am Main, Germany DA - 2010-11-02 PY - 2010 AN - OPUS4-22579 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kraus, Werner T1 - Wartung und Rekonditionierung: was ist zu beachten T2 - Haus der Technik; Gefahrgutverpackungen in der Praxis, BAM CY - Berlin, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22580 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heinrich, Annika T1 - Prüfung in der Praxis und häufige Fehlerquellen T2 - Haus der Technik, Gefahrgutverapckungen in der Praxis - inklusive Laborbesuch BAM CY - Berlin, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22581 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Probleme bei der Ermittlung der Leistungsmerkmale von Mörteln nach DIN EN 1504-3 am Beispiel der Widersprüche zur Prüfnorm DIN 13295 "Bestimmung des Karbonatisierungswiderstands" T2 - QDB Tagung: PÜZ-Stellen SIB nach Bauregelliste und notifizierte Stellen CY - Stuttgart, Germany DA - 2010-06-22 PY - 2010 AN - OPUS4-22582 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Spaltmann, Dirk A1 - Löhr, M. A1 - Effner, Ute A1 - Scholz, Christian A1 - Manier, Ch.-A. A1 - Woydt, Mathias T1 - Wälzbeständigkeit von DLC-Schichten T2 - 23. Treffen Industrie-Arbeitskreis Werkzeugbeschichtungen und Schneidstoffe (Fraunhofer IST) CY - Braunschweig, Germany DA - 2010-11-16 PY - 2010 AN - OPUS4-22583 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dombrowski, Felix A1 - Ploska, Ute A1 - Berger, Georg A1 - Stiller, M. A1 - Knabe, C. T1 - Figuline and biodegradable bone-replacement cements with different solubility: Mechanical behaviour during setting reaction and after storage under physiological conditions T2 - Junior EUROMAT 2010 CY - Lausanne, Switzerland DA - 2010-07-26 PY - 2010 AN - OPUS4-22516 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knabe, C. A1 - Berger, Georg A1 - Gildenhaar, Renate A1 - Ducheyne, P. A1 - Knabe, C. T1 - Novel, rapidly resorbable bioceramic bone grafts produce a major osteogenic effect - the pre-clinical evidence T2 - CIMTEC 2010 - 12th Intern. Conf. on Modern Materials and Technologies CY - Montecatini Terme, Italy DA - 2010-06-06 PY - 2010 AN - OPUS4-22517 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Naghib Zadeh, Hamid A1 - Rabe, Torsten A1 - Töpfer, J. T1 - Multikomponente-LTCC bestehend aus niedrig-sinternden X8R Kondensatorfolien, niedrig-sinternden Ferritfolien und Standard-LTCC-Basisfolien T2 - Deutsche IMAPS-Konferenz CY - Munich, Germany DA - 2010-10-12 PY - 2010 AN - OPUS4-22518 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Ralf A1 - Reinsch, Stefan T1 - Sinterability of Glass Powders T2 - Status Seminar, Programm for Developing the Supporting System for Global Mulitidisciplinary Engineering Establishment CY - Nagaoka, Japan DA - 2010-07-29 PY - 2010 AN - OPUS4-22519 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Ralf T1 - Overall Crystallization Kinetics of Glass Powders T2 - Status Seminar, Programm for Developing the Supporting System for Global Mulitidisciplinary Engineering Establishment CY - Nagaoka, Japan DA - 2010-07-29 PY - 2010 AN - OPUS4-22520 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Ralf A1 - Reinsch, Stefan A1 - Eberstein, M. A1 - Deubener, J. T1 - Sinterkinetik von Glasmatrixkompositen für LTCC Anwendungen T2 - DKG - Symp. Simulation und Modellierung von Fertigungsprozesen CY - Erlangen, Germany DA - 2010-11-30 PY - 2010 AN - OPUS4-22521 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Ralf A1 - Reinsch, Stefan A1 - Nascimento, M.L.F. A1 - Zanotto, E. D. T1 - Crystal growth kinetics in cordierite and diopside glasses in wide temperature ranges T2 - Intern. Congr. on Glass ICG2010, Annual Meeting TC7, ICG CY - Bahia, Brazil DA - 2010-09-20 PY - 2010 AN - OPUS4-22522 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dreßler, Martin A1 - Dombrowski, Felix A1 - Simon, Ulla A1 - Börnstein, Julian A1 - Hodoroaba, Vasile-Dan A1 - Feigl, Michael A1 - Grunow, Sabrina A1 - Gildenhaar, Renate T1 - Toughening of porous ceramics T2 - CellMat 2010 CY - Dresden, Germany DA - 2010-10-27 PY - 2010 AN - OPUS4-22523 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Zscherpel, Uwe A1 - Ewert, Uwe A1 - Lierse von Gostomski, C. A1 - Bock, S. T1 - Filtering algorithm for dotted interferences T2 - 9th World Conference on Neutron Radiography CY - Rustenburg, South Africa DA - 2010-10-03 PY - 2010 AN - OPUS4-22524 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Staude, Andreas A1 - Neukamm, Marko A1 - Schulze, Matthias T1 - Untersuchung der geometrischen Eigenschaften industrieller CT mit Hilfe eines neuartigen Prüfkörpers und den Methoden der Photogrammetrie T2 - DGZfP-Jahrestagung CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-22525 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Alterungsvorgänge durch Bewitterung bei Beschichtungen und deren Untersuchung und Prüfung T2 - 42. SAH-Tagung 2010, "Holzoberflächen in der Fassadengestaltung", Schweizerische Arbeitsgemeinschaft für Holzforschung CY - Weinfelden, Switzerland DA - 2010-10-26 PY - 2010 AN - OPUS4-22587 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Ansari, Farhad T1 - Civil Structural Monitoring T2 - ANDRA Workshop on Potential Technologies for Geological Repositories CY - Troyes, France DA - 2010-06-08 PY - 2010 AN - OPUS4-22589 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Schlüter, Vivien T1 - Reliable use of fibre optic strain sensors based on guidelines and new validation procedures T2 - 5th European Workshop on SHM CY - Sorrento, Italy DA - 2010-06-29 PY - 2010 AN - OPUS4-22590 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neddemeyer, Torsten A1 - Olbricht, Jürgen A1 - Kranzmann, Axel A1 - Klingelhöffer, Hellmuth A1 - Skrotzki, Birgit T1 - Ergänzende Prüfung von Werkstoffen für Kraftwerksapplikationen durch Versuche unter prozessnahen Prüfbedingungen T2 - 33. Vortragsveranstaltung "Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe" der Arbeitsgemeinschaften für warmfeste Stähle und für Hochtemperaturwerkstoffe, Stahlinstitut VDEh CY - Düsseldorf, Germany DA - 2010-11-26 PY - 2010 AN - OPUS4-22591 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Schukar, Vivien T1 - Strukturierte Zustandsüberwachung T2 - DGZfP-Kurs CY - Berlin, Germany DA - 2010-10-07 PY - 2010 AN - OPUS4-22592 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Basedau, Frank T1 - Strukturierte Zustandsüberwachung T2 - DGZfP-Kurs CY - Berlin, Germany DA - 2010-02-18 PY - 2010 AN - OPUS4-22593 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang T1 - Fasersensorik-Schwerpunkte und -Aktivitäten in der Bundesanstalt für Materialforschung und -prüfung T2 - PhoKoS-Meeting CY - Berlin, Germany DA - 2010-01-13 PY - 2010 AN - OPUS4-22594 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Schlüter, Vivien T1 - Voraussetzungen für die zuverlässige Nutzung von Fasersensoren in intelligenten Verbundwerkstoffen T2 - FhG-AK Sensorierung von Verbundwerkstoffen CY - Berlin, Germany DA - 2010-06-24 PY - 2010 AN - OPUS4-22595 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Friese, Martin A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Mayer, K. A1 - Ballier, G. T1 - Darstellung des Verpresszustandes von Spannkanälen mit 3D-Ultraschallechoverfahren: Modellierung und Experiment T2 - DGZfP-Jahrestagung CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-22847 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Beck, Matthias A1 - Goebbels, Jürgen A1 - Burkert, Andreas A1 - Isecke, Bernd A1 - Bäßler, Ralph T1 - Monitoring of corrosion processes in chloride contaminated mortar by electrochemical measurements and X-ray tomography N2 - Corrosion of steel reinforcement in concrete exposed to chloride containing environments is a serious problem in civil engineering practice. Electrochemical methods, e.g., potential mapping, provide information whether the steel reinforcement is still passive or depassivation has been initiated. By applying such techniques no information on the type of corrosion, its extent and distribution of corrosion products is available. Particular the corrosion progress is a significant problem. Especially in the case of macrocell corrosion in reinforced concrete structures, the development at the anode cannot be separated into corrosion damage resulting from macrocell corrosion or self-corrosion. Until now also in laboratory tests it is impossible to collect such information without destroying specimens after electrochemical testing was performed. To overcome this problem it was tried to study the steel surface within the mortar specimens by X-ray tomography (CT). Within the scope of these investigations it could be shown, that X-ray tomography is suitable to make corrosion pits and their development visible which are embedded in a mortar with a cover thickness of about 35 mm. In this publication the time-dependent corrosion damage of reinforced steel is documented by X-ray tomography. KW - Self-corrosion KW - X-ray tomography KW - Concrete parameters KW - Contaminated mortar KW - Electrochemical measurements KW - Pitting corrosion PY - 2010 DO - https://doi.org/10.1002/maco.200905364 SN - 0947-5117 SN - 1521-4176 VL - 61 IS - 6 SP - 475 EP - 479 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-22848 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin T1 - Zerstörungsfreie Prüfung von Betonbauteilen mit bildgebenden Ultraschallecho-Verfahren T2 - DGZfP-Arbeitskreis Dresden CY - Dresden, Germany DA - 2010-06-22 PY - 2010 AN - OPUS4-22850 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Proske, Matthias A1 - Recknagel, Christoph A1 - Koch, Matthias A1 - Nehls, Irene T1 - Identifizierung und Nachweis von Silan-Haftvermittlern auf Fahrbahnmarkierungs-Systemen mittels Headspace- und (Hochtemperatur-)Thermodesorptions-GC mit gekoppelter Massenspektrometrie T2 - Wissenschaftliches Meeting (BASt - Bundesanstalt für Straßenwesen) CY - Bergisch Gladbach, Germany DA - 2010-12-14 PY - 2010 AN - OPUS4-22851 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Fontana, Patrick A1 - Di Bella, C. A1 - Lura, P. ED - Littmann, K. T1 - Evaluation of plastic shrinkage cracking risk of concrete - an advanced test method T2 - 7. Internationales Kolloquium Industrieböden 2010 CY - Ostfildern, Deutschland DA - 2010-12-14 KW - Concrete KW - Plastic shrinkage KW - Cracking KW - Advanced experimental setup PY - 2010 SN - 3-924813-85-X IS - Chapter 1.6 SP - 117 EP - 125 AN - OPUS4-22854 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gluth, Gregor A1 - Oppat, Klaus A1 - Vogler, Nico A1 - Kühne, Hans-Carsten ED - Littmann, K. T1 - Vergleich unterschiedlicher Verfahren zur Messung der Oberflächenrauheit N2 - Die Oberflächenrauheit eines Bauteils ist eine wichtige Kenngröße für zahlreiche seiner Eigenschaften. Der im Bauwesen übliche Rauheitsparameter ist die Rautiefe Rt bzw. MTD, die durch volumetrische Verfahren (Sandflächenverfahren) ermittelt wird und in zahlreichen Normen Verwendung findet. Laserbasierte Verfahren müssen deshalb eine Umrechnung der aus Oberflächenprofilen gewonnenen Informationen in Rt bzw. MTD ermöglichen. Hierzu wird i.A. ein empirischer Zusammenhang zwischen Parametern zur Beschreibung des Profils und der Rautiefe der entsprechenden Oberfläche verwendet. Der Aufsatz stellt verschiedene Rauheitsdefinitionen vor und vergleicht sie miteinander. Es wird ferner gezeigt, dass die nach verschiedenen Prüfvorschriften ermittelten Rautiefen voneinander abweichen. Das Vorgehen bei der Ermittlung des Zusammenhangs zwischen Profilparametern und Rautiefen nach einem volumetrischen Verfahren wird demonstriert und der Stand der laufenden Entwicklung eines Prüfgeräts auf Basis eines Linienlasers vorgestellt. T2 - 7. Internationales Kolloquium Industrieböden 2010 CY - Ostfildern, Germany DA - 14.12.2010 KW - Rauheit KW - Rautiefe KW - Volumetrische Methode KW - Sandflächenverfahren KW - Laserverfahren KW - Linienlaser PY - 2010 SN - 3-924813-85-X SP - 135 EP - 141 PB - Technische Akademie Esslingen (TAE) CY - Ostfildern AN - OPUS4-22855 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trappe, Volker A1 - Mix, Renate T1 - Kompatibilität und Qualität von Faserhalbzeugen und Matrix-Werkstoffen - Etablierte Verfahren und neue Konzepte T2 - Symposium für Segelflugzeugentwicklung 2010 CY - Braunschweig, Germany DA - 2010-11-18 PY - 2010 AN - OPUS4-22856 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Madia, Mauro A1 - Riesch-Oppermann, H. A1 - Zerbst, Uwe A1 - Beretta, S. T1 - Ein Konzept für die probabilistische bruchmechanische Bauteilbewertung T2 - 42. Tagung des DVM-Arbeitskreises Bruchvorgänge - Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen CY - Paderborn, Deutschland DA - 2010-02-23 KW - Bruchmechanische Bauteilbewertung KW - SINTAP KW - FITNET KW - Zuverlässigkeit KW - FORM/SORM PY - 2010 SP - 51 EP - 60 AN - OPUS4-22837 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Narbonneau, F. A1 - De Jonckheere, J. A1 - Jeanne, M. A1 - Kinet, D. A1 - Witt, Jens A1 - Krebber, Katerina A1 - Paquet, B. A1 - Depré, A. A1 - D´Angelo, L.T. A1 - Thiel, T. A1 - Logier, R. ED - Popp, J. T1 - OFSETH: Optical technologies embedded in smart medical textile for continuous monitoring of respiratory motions under magnetic resonance imaging N2 - The potential impact of optical fiber sensors embedded into medical textiles for the continuous monitoring of the patient during Magnetic Resonance Imaging (MRI) is now proved. We report how two pure optical technologies can successfully sense textile elongation between, 0% and 3%, while maintaining the stretching properties of the textile substrates for a good comfort of the patient. Investigating influence of different patients' morphology as well as textile integration issues to let free all vitals organs for medical staff actions, the OFSETH harness allows a continuous measurement of respiration movements. For example, anaesthesia for MRI examination uses the same drugs as for any surgical procedure. Even if spontaneous respiration can be preserved most of the time, spontaneous respiration is constantly at risk of being impaired by anaesthetic drugs or by upper airway obstruction. Monitoring of the breathing activity is needed to assess adequate ventilation or to detect specific obstruction patterns. Moreover artefacts due to physiological motions induce a blooming effect on the MRI result. The use of synchronisation devices allows reducing these effects. Positioned at certain strategic places according to the investigated organ, the presented sensors could constitute an efficient and adapted solution for respiratory synchronisation of the MRI acquisition. KW - MRI KW - Smart textile KW - Healthcare monitoring KW - Optical sensor KW - FBG KW - Respiratory sensor PY - 2010 SN - 9780819481887 DO - https://doi.org/10.1117/12.854386 VL - 7715 SP - 77151D-1 - 77151D-12 AN - OPUS4-22839 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin A1 - Matyschik, Jan T1 - Sulfate in Bauschutt - Herkunft und Auswirkungen T2 - Fachtagung Recycling R´10 CY - Weimar, Deutschland DA - 2010-09-22 KW - Recycling KW - Bauschutt KW - RC-Baustoffe PY - 2010 SP - 1 EP - 2 AN - OPUS4-22840 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Uhlmann, E. A1 - Duchstein, B. A1 - Hamann, Andreas T1 - Alterungsbedingter Rückgang der Rückhaltefähigkeit von Polycarbonat-Sichtscheiben KW - Polycarbonat KW - Sichtscheiben KW - Rückhaltefähgikeit KW - Alterung KW - Kühlschmierstoff KW - Aufprallsimulation KW - Experimentelle Aufprallprüfung KW - Werkstoffversagen PY - 2010 SN - 1868-5919 VL - 3 SP - 64 EP - 65 PB - Public Verl.-Ges. und Anzeigenagentur CY - Bingen AN - OPUS4-22841 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hamann, Andreas A1 - Löwe, Peter ED - Pohl, M. T1 - Charakterisierung eines lokalen dehnratenabhängigen Deformationsverhaltens durch Hochgeschwindigkeitszugversuche mit konstanter Kolbengeschwindigkeit am Beispiel von Polykarbonat T2 - Tagung Werkstoffprüfung 2010 CY - Neu-Ulm, Deutschland DA - 2010-12-02 KW - Lokale Werkstoffcharakterisierung KW - Dehnratenabhängiges Deformationsverhalten KW - Werkstoffversagen KW - Dissipation KW - Polykarbonat PY - 2010 SN - 978-3-514-00778-9 SP - 269 EP - 274 PB - Verl. Stahleisen GmbH CY - Düsseldorf AN - OPUS4-22842 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Madia, Mauro A1 - Riesch-Oppermann, H. A1 - Zerbst, Uwe A1 - Beretta, S. ED - Klingbeil, D. ED - Vormwald, M. ED - Eulitz, K.-G. T1 - A new full-probabilistic framework for the structural integrity assessment of structures containing cracks T2 - 18th European conference on fracture (ECF 18) - Fracture of materials and structures from micro to macro scale CY - Dresden, Germany DA - 2010-08-30 KW - Structural integrity KW - SINTAP KW - FITNET KW - Reliability KW - FORM PY - 2010 SN - 978-3-00-031802-3 IS - C.02.1-3 / #306 SP - 1 EP - 10 AN - OPUS4-22843 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert T1 - Signal Analysis and Data Fusion of Multi Sensor NDE of Concrete T2 - National Seminar on Non-Destructive Evaluation NDE 2010 CY - Kolkata, India DA - 2010-12-09 PY - 2010 AN - OPUS4-22844 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Littmann, K. T1 - Parameterstudien zum Einfluss von Rezepturveränderungen auf Schwindverhalten, Rissneigung und Steifigkeit mineralischer Instandsetzungsmörtel T2 - 7. Internationales Kolloquium Industrieböden 2010 CY - Ostfildern, Deutschland DA - 2010-12-14 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - Haftverbund KW - SPCC KW - PCC PY - 2010 SN - 3-924813-85-X IS - Kap. 2.6 SP - 191 EP - 200 AN - OPUS4-22845 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wilsch, Gerd A1 - Schaurich, Dieter A1 - Wiggenhauser, Herbert T1 - Imaging laser analysis of building materials - practical examples T2 - Quantitative Nondestructive Evaluation QNDE 2010 CY - San Diego, CA, USA DA - 2010-07-18 PY - 2010 AN - OPUS4-22846 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaenisch, Gerd-Rüdiger A1 - Deresch, Andreas A1 - Bellon, Carsten A1 - Ewert, Uwe A1 - Przybilla, Waldemar T1 - Scatter Ratio at High Energies - Simulation and Experiments T2 - BINDT - NDT 2010 CY - Cardiff, Wales DA - 2010-09-14 PY - 2010 AN - OPUS4-22787 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wöhlecke, Andreas A1 - Müller, Werner T1 - Neue Richtlinien für Zulassungen von Kunststoffdichtungsbahnen, Kunststoff-Dränelementen und Geokunststoffen für Trenn-, Filter-, Schutz- und Bewehrungsfunktionen sowie von Dichtungskontrollsystemen gemäß neuer DepV T2 - Karlsruher Deponie- und Altlastenseminar CY - Karlsruhe, Germany DA - 2010-10-13 PY - 2010 AN - OPUS4-22788 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Urban, Klaus A1 - Hahn, Axel T1 - Childproof oil lamps are possible! New design burners can effectively protect children from poisoning N2 - Backgrouund:For more than 10 years the Federal Institute for Risk Assessment (BfR) and its predecessor institutes have been striving to reduce the risk of poisoning from lamp oil by raising awareness of the hazards. In most of these accidents children drank directly from the unsafe oil lamps, which are mostly in the reach of the children. Therefore, a European standard was published in 2003 (DIN EN 14059: Decorative oil lamps – Safety requirements and test methods) on the initiative of BfR, which stipulates safety requirements and test methods for safe oil lamps for ornamental purposes. However, manufacturers and distributors have so far failed to develop childproof oil lamps for use in homes and gardens or place such lamps on the European market. To protect the children, proposals have been made for an easy construction of child-safe burners. Method: Out of concern for children's health the BAM Federal Institute for Materials Research and Testing (BAM), with the support of BfR, has come up with a design study for a childproof burner for lamp oils. This is a very simple and low-cost design that can be constructed without any major technical outlay. Existing lamps can be retrofitted. The burners are designed in such a way that children can no longer open and drink from the oil lamps. It is also much more difficult for them to access the wick. The BAM, the responsible public agency, makes this design available to manufacturers and distributors free of charge on the Internet. Manufacturers can then incorporate it into their own marketable products thereby considerably increasing the safety of their products in line with the Product Safety Act. Results: The BAM and BfR activities should be seen more particularly against the backdrop that the actual share of less dangerous substitutes for lamp oils containing biodiesel, mineral oil or coconut oil is quite small, but will increase in the future with a new legislation. Conclusion: The still existing gap between dangerous paraffin lamp oils and their safe substitutes can be tightened by constructive measures. The suggested "public open" low-cost design for ornamental lamps can effectively protect children from poisoning. T2 - North American Congress of Clinical Toxicology CY - Denver, CO, USA DA - 2010-10-07 PY - 2010 AN - OPUS4-22790 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Raedel, Martina A1 - Sabel, Martin A1 - Bücker, Michael A1 - Reimann, M. A1 - Haber, G. A1 - Baldauf, T. T1 - Korrosionsschutz für farbig gefasste Eisen- und Gusseisenobjekte T2 - Farbig gefasstes Metall, Herstellung - Schäden - Restaurierung CY - Kassel, Germany DA - 2010-09-30 PY - 2010 AN - OPUS4-22791 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Raedel, Martina A1 - Bücker, Michael A1 - Unger, Brita T1 - Historische und moderne Goldmosaike im Vergleich T2 - Poster für die Archäometrie-Tagung CY - Bochum, Germany DA - 2010-09-15 PY - 2010 AN - OPUS4-22793 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gluth, Gregor A1 - Oppat, Klaus A1 - Vogler, Nico A1 - Kühne, Hans-Carsten T1 - Vergleich unterschiedlicher Verfahren zur Messung der Oberflächenrauheit T2 - 7. Internationales Kolloquium Industrieböden CY - Ostfildern, Germany DA - 2010-12-14 PY - 2010 AN - OPUS4-22795 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebs, Holger A1 - Schäfer, Diana A1 - Hasenfelder, Uta T1 - Identifikation und Prüfung von Sprengzündern T2 - Weiterbildung für LKA Brandenburg, BAM CY - Berlin, Germany DA - 2010-12-02 PY - 2010 AN - OPUS4-22827 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rodner, Hans-Jochen T1 - Pyrotechnik - Verletzungen - Wundballistik T2 - DGUB-Montagsfortbildung, UKB CY - Berlin, Germany DA - 2010-12-06 PY - 2010 AN - OPUS4-22828 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rodner, Hans-Jochen T1 - Pyrotechnik - Verletzungen - Wundballistik T2 - 554. Sitzung der AGS Berlin-Brandenburg CY - Berlin, Germany DA - 2010-12-10 PY - 2010 AN - OPUS4-22829 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Falkenhagen, Jana T1 - Copolymer characterization by coupled LC - MS/MS techniques T2 - 2010 International Chemical Congress of Pcific Basin Societies CY - Honolulu, HI, USA DA - 2010-12-15 PY - 2010 AN - OPUS4-22831 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scharf, Oliver A1 - Gubzhokov, Renat A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Bjeoumikhov, S. A1 - Wedell, R. A1 - Ihle, S. A1 - Soltau, H. T1 - X-ray camera with high energy and spatial resolution: a colour X-ray camera T2 - BESSY User Meeting CY - Berlin, Germany DA - 2010-12-09 PY - 2010 AN - OPUS4-22833 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Emmerling, Franziska A1 - Klimakow, Maria A1 - Klobes, Peter T1 - Gas Adsorption and SAXS Studies of Mechanochemically Prepared MOFs T2 - XV. POROTEC-Workshop über die Charakterisierung von feinteiligen und porösen Festkörpern CY - Bad Soden, Germany DA - 2010-11-16 PY - 2010 AN - OPUS4-22834 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Griesche, Axel A1 - Beyer, Katrin A1 - Kannengießer, Thomas A1 - Schillinger, B. T1 - In-situ observation of hydrogen diffusion in iron using neutron radiography N2 - Hydrogen assisted cracking of metals limits the durability of welds and constructions. Still the failure mechanisms are not fully understood, for instance the role of hydrogen mass transport during crack initiation. Measuring the hydrogen concentration as a function of time (and space) would allow to determine diffusion coefficients helping to enlighten this lack of understanding. Therefore, neutron radiography is a valuable tool for measuring in situ hydrogen transport in iron and steels [1]. The influence of grain boundaries on the hydrogen diffusion behaviour can be determined by comparing the diffusion behaviour of samples with e.g. different microstructure. In a first study we investigated in situ the simplest case, the hydrogen effusion out of pure iron (ARMCO) using neutron radiography at ANTARES [2]. Samples were charged electrochemically ex situ with a well defined amount of hydrogen, stored in liquid nitrogen and were then heat treated during a neutron radiography measurement whilst the change of neutron transmission was recorded. For analysis the gray values in the pictures were transformed into concentrations with help of an ex post calibration. Therefore, the experimental temperaturetime profile of the heat treatment has been repeated with identical samples in the home lab and the amount of effusing hydrogen was measured by carrier gas hot extraction. In a first approximation the concentration of hydrogen in the sample can be calculated by subtracting the hydrogen concentration in the atmosphere from the initial one in the sample. We were able to measure hydrogen concentrations as low as 65 wt.ppm. Simultaneously monitoring of hydrogenous sample and hydrogen-free reference allowed for in situ measurement of hydrogen effusion. Sample heating was done by infrared radiation. Diffusion coefficients for hydrogen effusion from iron have been calculated. They coincide fairly with literature data. T2 - 3rd FRM II User Meeting CY - Garching, Germany DA - 2010-10-15 PY - 2010 AN - OPUS4-22835 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lühl, Lars A1 - Hahn, Oliver A1 - Hesse, B. A1 - Mantouvalou, I. A1 - Kanngießer, B. A1 - Zizak, I. T1 - 3D Mikro - Röntgennahkantenabsorptionsspektroskopie (XANES - X - Ray Absorption Near Edge Spectroscopy) T2 - Tagung Archäometrie und Denkmalpflege CY - Bochum, Germany DA - 2010-09-15 PY - 2010 AN - OPUS4-22797 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfuch, A. A1 - Horn, K. A1 - Mix, Renate A1 - Ramm, M. A1 - Heft, A. A1 - Schimanski, A. ED - Suchentrunk, R. T1 - Direct and remote plasma assisted CVD at atmospheric pressure for the preparation of oxide thin films N2 - In this paper the preparation of silicon and titanium oxide thin films using an atmospheric pressure plasma process will be reported. To obtain these oxide films hexamethyldisiloxane and titanium tetraisopropoxide were used as precursor materials. Based on the different chemical reaction mechanisms the film deposition processes were carried out in the direct as well as in the remote PACVD mode. The deposition parameters were varied and the influence on different film properties was studied. The deposited oxide films were characterised by profilometry, ellipsometry, SEM, UV-VIS-NIR-transmission measurements. FT-IR spectroscopy and contact angle measurements. Additionally, first results will be presented concerning the creation of composite films using a combination of plasma and liquid dye nebulization technique. KW - FTIR KW - Ellipsometry KW - Profilometry KW - SEM KW - PACVD KW - Silicon oxide PY - 2010 SN - 978-3-87480-259-8 VL - 66 SP - 114 EP - 124 PB - Eugen G. Leuze CY - Bad Saulgau AN - OPUS4-22798 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sterthaus, Jens A1 - Koch, Frank A1 - Bletzer, Claus W. T1 - The Influence of Thermal Expansion on Package Tightness During Fire T2 - PATRAM 2010 16th International Symposium on the Packaging and Transport of Radioactive Materials CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-22799 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erning, Johann Wilhelm T1 - Interkristalline Korrosion von entzinkungsbeständigem Messing T2 - GfKORR Arbeitskreis Kupfer CY - Iserlohn, Germany DA - 2010-11-23 PY - 2010 AN - OPUS4-22800 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erning, Johann Wilhelm T1 - Metal release from plumbing materials: Status of Standardisation and regulation in Europe T2 - Seminar on Drinking Water CY - Zagreb, Croatia DA - 2010-11-29 PY - 2010 AN - OPUS4-22801 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erning, Johann Wilhelm T1 - Sanierungsfall Epoxidharz T2 - DVGW Landesgruppe Nord CY - Travemünde, Germany DA - 2010-10-27 PY - 2010 AN - OPUS4-22802 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erning, Johann Wilhelm A1 - Klein, Ulrich A1 - Steinhoff, Ulf Michael T1 - Electrochemical measurements to compare the corrosiveness of different electrolytically produced disinfection fluids T2 - Eurocorr 2010 CY - Moscow, Russia DA - 2010-09-14 PY - 2010 AN - OPUS4-22803 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erning, Johann Wilhelm T1 - Change of Drinking Water Quality due to contact with Pipe Materials in Domestic Installations T2 - WMRIF Workshop CY - Berlin, Germany DA - 2010-08-31 PY - 2010 AN - OPUS4-22804 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erning, Johann Wilhelm T1 - Schäden an nicht rostenden Stählen durch Desinfektion T2 - GfKORR 3-Länder-Tagung CY - Berlin, Germany DA - 2010-04-19 PY - 2010 AN - OPUS4-22805 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erning, Johann Wilhelm T1 - Aktuelles zur Rohrinnensanierung T2 - GfKORR Arbeitskreis Korrosionsschutz durch Beschichtungen CY - Frankfurt am Main, Germany DA - 2010-02-09 PY - 2010 AN - OPUS4-22806 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie A1 - Hilbers, F. J. T1 - Messungen und Laborversuche an der schweißeisernen Spreebrücke an der Berliner Friedrichstraße T2 - VDI-Vortrag, TU Berlin CY - Berlin, Germany DA - 2010-10-14 PY - 2010 AN - OPUS4-22857 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Milmann, Boris A1 - Feldmann, Rüdiger A1 - Friese, Martin A1 - Wöstmann, Jens A1 - Zoëga, Andreas A1 - Sodeikat, Ch. T1 - Thickness Measurement and Quality Assurance of Floor Slabs and Diaphragm Walls T2 - Structural Faults & Repair 2010, 13th International Conference and Exhibition, The University of Edinburgh CY - Edinburgh, Scotland DA - 2010-06-15 PY - 2010 AN - OPUS4-22861 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Müller, Bernd R. A1 - Markötter, H. A1 - Haussmann, J. A1 - Krüger, P. A1 - Arlt, Tobias A1 - Scholta, J. A1 - Manke, I. A1 - Banhart, J. T1 - Analysis of Water Accumulations in PEM Fuel Cell Stacks with Neutron Tomography and Current Density Measurements T2 - 2nd HZB Joints User's Meeting CY - Berlin, Germany DA - 2010-12-09 PY - 2010 AN - OPUS4-22862 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kupsch, Andreas A1 - Müller, Bernd R. A1 - Hentschel, Manfred P. A1 - Riesemeier, Heinrich A1 - Lange, Axel A1 - Wieder, F. A1 - Manke, I. A1 - Banhart, J. A1 - Schmidt, V. A1 - Thiedmann, R. A1 - Lehnert, W. A1 - Sutmann, G. A1 - Quick, C. T1 - Three Dimensional Analysis, Modelling and Simulation of Microstructures and Transport Processes in Carbon Fibre Based Porous Materials T2 - 2nd HZB Joint User's Meeting CY - Berlin, Germany DA - 2010-12-09 PY - 2010 AN - OPUS4-22863 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Arlt, Tobias A1 - Haussmann, J. A1 - Hartnig, C. A1 - Krüger, P. A1 - Manke, I. A1 - Grothausmann, R. A1 - Banhart, J. A1 - Markötter, H. A1 - Wippermann, K. T1 - Tomographic Methods for Investigation of Fuel Cell Materials T2 - 2nd HZB Joint User's Meeting CY - Berlin, Germany DA - 2010-12-09 PY - 2010 AN - OPUS4-22864 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Harwardt, Michael A1 - Hentschel, Manfred P. T1 - Visualization of Package Induced Deformation of Integrated Circuits T2 - 10th European Conference on Non-Destructive Testing (ECNDT) CY - Moscow, Russia DA - 2010-07-07 PY - 2010 AN - OPUS4-22865 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fontana, Patrick A1 - Di Bella, C. A1 - Lura, P. T1 - Evaluation of plastic shrinkage cracking risk of concrete - an advanced test method T2 - 7. Kolloquium Industrieböden 2010 CY - Esslingen am Neckar, Germany DA - 2010-12-14 PY - 2010 AN - OPUS4-22866 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Poeste, Tobias A1 - Ohm, Katrin A1 - Baer, Wolfram T1 - Duktiler Betonstahl Teil 3 Untersuchung der Einflüsse der Verfahrenstechnologie... - Abschlussbericht zum BAM-Vorhaben 5357 T2 - ISB Arbeitskreis Technik CY - Düsseldorf, Germany DA - 2010-11-09 PY - 2010 AN - OPUS4-22809 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wallstabe, Ronald A1 - Paulinus, Olivia A1 - Klinger, Christian T1 - Bruchursache eines Implantats: Werkstoff- oder Fertigungsfehler? T2 - Tagung Werkstoffprüfung 2010 CY - Neu-Ulm, Germany DA - 2010-12-02 PY - 2010 AN - OPUS4-22810 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Urban, M. A1 - Stempniewski, L. A1 - Münich, C. A1 - Zangani, D. A1 - Messervey, T. A1 - Sasek, L. A1 - Liehr, Sascha T1 - Shaking table test of a two-storey stone masonry building reinforced with multifunctional textiles T2 - 3rd International Workshop on Civil Structure Health Monitoring: Conservation of Heritage Structures Using FRM and SHM CY - Ottawa, Canada DA - 2010-08-11 PY - 2010 AN - OPUS4-22811 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schwenk, D. A1 - Subaric-Leitis, Andreas T1 - QS-Kennwerte von Werkstoffprüfmaschinen T2 - Fachausschuss 12 der AWT und Arbeitskreis Härteprüfung der DGM CY - Wiesbaden, Germany DA - 2010-10-13 PY - 2010 AN - OPUS4-22812 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - de Oliveira, Rui A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - Michaud, V. T1 - Development of adaptive composites with embedded plastic optical fibres T2 - The Third International Conference on Recent Advances in Composite Materials CY - Limoges, France DA - 2010-12-13 PY - 2010 AN - OPUS4-22813 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hahn, Oliver T1 - Mit dem Röntgenblick durch Archive und Museen - Zerstörungsfreie Materialanalyse für die Untersuchung von Kunst- und Kulturgut T2 - 176. Sitzung des Arbeitskreises Magdeburg der DGZfP CY - Magdeburg, Germany DA - 2010-12-15 PY - 2010 AN - OPUS4-22814 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klinger, Christian A1 - Bettge, Dirk A1 - Schriever, Sina A1 - Häcker, Ralf A1 - Bohse, Jürgen A1 - Wallstabe, Ronald T1 - Fraktographie für die Schadensanalyse T2 - Gründungssitzung der AG Fraktographie, BAM CY - Berlin, Germany DA - 2010-09-03 PY - 2010 AN - OPUS4-22815 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Klinger, Christian A1 - Bettge, Dirk T1 - Outcome of the Cologne Accident Investigation T2 - WOLAXIM-Project Kickoff-Meeting CY - Cambridge, England DA - 2010-11-22 PY - 2010 AN - OPUS4-22816 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tzschichholz, Grit A1 - Steinborn, Gabriele A1 - Hoffmann, M.J. A1 - Keller, M. A1 - Manara, J. T1 - Maßgeschneiderte poröse TiO2-Y2O3-Keramiken mit spezifischen infrarot-optischen Eigenschaften T2 - DKG-Jahrestagung, Symposium Hochleistungskeramik CY - Hermsdorf (Thuringia), Germany DA - 2010-03-22 PY - 2010 AN - OPUS4-22777 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Steinborn, Gabriele T1 - Möglichkeiten zur prozessbegleitenden Prüfung der Partikelgrößen- und Zetapotentialbestimmung in keramischen Dispersionen mit dem Ultraschallspektrometer DT1200 T2 - 45. Sitzung des Fachausschusses FA III Verfahrenstechnik CY - Erlangen, Germany DA - 2010-11-30 PY - 2010 AN - OPUS4-22778 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Paulick, Carl A1 - Sojref, Regine A1 - Makrlik, A. T1 - Fügen von Metall/ Keramikbauteilen mit direkt eingesinterten Elektroden T2 - Jahrestagung der DKG CY - Hermsdorf (Thuringia), Germany DA - 2010-03-22 PY - 2010 AN - OPUS4-22779 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ewert, Uwe A1 - Redmer, Bernhard T1 - Prospects of Mobile Computed Tomography T2 - 10th. European Conference on Non-Destructive Testing CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-22780 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Redmer, Bernhard A1 - Ewert, Uwe T1 - Technische Radiographie - Quo Vadis? T2 - DGZfP-Arbeitskreis Zwickau-Chemnitz CY - Zwickau, Germany DA - 2010-06-29 PY - 2010 AN - OPUS4-22781 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ewert, Uwe A1 - Redmer, Bernhard A1 - Föllner, Maik A1 - Kannengießer, Thomas A1 - Kromm, Arne T1 - Mobile Computed Tomography for Inspection of Welded Pipes T2 - 8th International Conference on NDE CY - Berlin, Germany DA - 2010-09-29 PY - 2010 AN - OPUS4-22782 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ewert, Uwe A1 - Fratzscher, Daniel A1 - Redmer, Bernhard A1 - Thiessenhusen, Kai-Uwe T1 - Laminographic Inspection of Fibre Composites and the Problem of Delaminations T2 - International Symposium on NDT in Aerospace CY - Hamburg, Germany DA - 2010-11-22 PY - 2010 AN - OPUS4-22784 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klinger, Christian A1 - Häcker, Ralf A1 - Bettge, Dirk A1 - Klingbeil, Dietmar A1 - Baer, Wolfram A1 - Mehdianpour, Milad T1 - Failure analysis on broken power towers in the region Münsterland (Germany) November 2005 T2 - International Conference Engineering Failure Analysis CY - Cambridge, England DA - 2010-07-04 PY - 2010 AN - OPUS4-22785 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Redmer, Bernhard A1 - Ewert, Uwe A1 - Rädel, Christoph A1 - Bavendiek, K. A1 - Jahn, M. T1 - Gantry Gate Based X-Ray Computed Tomography in Aerospace Industry T2 - 10th European Conference on NDT CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-22786 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klinger, Christian A1 - Häcker, Ralf A1 - Bettge, Dirk A1 - Gohlke, Dirk A1 - Heckel, Thomas T1 - Schadensanalyse zum Radsatzwellenbruch ICE 3 T2 - DGM Werkstoffprüfung 2010 CY - Neu-Ulm, Germany DA - 2010-12-03 PY - 2010 AN - OPUS4-22818 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klinger, Christian A1 - Mehdianpour, Milad A1 - Bettge, Dirk A1 - Häcker, Ralf A1 - Klingbeil, Dietmar A1 - Lüddecke, Falk A1 - Baer, Wolfram T1 - Thomas-Stahl in Freileitungsmasten: "Strommastenschäden Münsterland 2005" - Untersuchungen, Ergebnisse und Maßnahmen T2 - Jahrestagung IHE Zittau, Instandhaltung in der Energiewirtschaft CY - Dessau-Roßlau, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22819 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klinger, Christian A1 - Bettge, Dirk A1 - Häcker, Ralf A1 - Heckel, Thomas A1 - Gohlke, Dirk A1 - Klingbeil, Dietmar T1 - Failure Analysis on a Broken ICE3 Railway Axle - Interdisciplinary Approach T2 - ESIS TC24 Workshop "Railway Structures" CY - Berlin, Germany DA - 2010-10-11 PY - 2010 AN - OPUS4-22820 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wloka, Monika T1 - The evolution of the ISO/IEC 17000 series: Will they be weaker or more demanding? Will they be adequate for European purpose? T2 - EUROLAB International Worksho, Conformity Assessment in 2010 Where we are and where we go CY - Brussels, Belgium DA - 2010-10-20 PY - 2010 AN - OPUS4-22824 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hamann, Andreas A1 - Löwe, Peter T1 - Experimentelle Ermittlung des lokalen Deformationsverhaltens und des Versagens bei hohen Dehnraten am Beispiel von Polycarbonat T2 - DVM AK "Verformung und Bruch" CY - Karlsruhe, Germany DA - 2010-07-07 PY - 2010 AN - OPUS4-22825 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Löwe, Peter A1 - Hamann, Andreas T1 - Charakterisierung eines lokalen dehnratenabhängigen Deformationsverhaltens durch Hochgeschwindigkeitszugversuche mit konstanter Kolbengeschwindigkeit am Beispiel von Polycarbonat T2 - DVM-DGM-Tagung "Werkstoffprüfung 2010" CY - Neu-Ulm, Germany DA - 2010-12-02 PY - 2010 AN - OPUS4-22826 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hünert, Daniela A1 - Schulz, Wencke A1 - Kranzmann, Axel T1 - Corrosion behavior of ferritic and martensitic power plant steels under conditions of dual atmospheres N2 - The most efficient construction materials for boiler water walls and superheaters in steam power plants are ferritic and martensitic steels. In practical operation, tubes are exposed simultaneously to combustion gas and air/steam on their opposite surfaces. The corrosion behavior of ferritic-martensitic steels under such dual atmospheres is nondistinctive and has been investigated in a specially designed test equipment between 500°C and 620°C. The power plant conditions were simulated with a flowing and pressurized (80 bar) combustion gas on the inner side of the tube, which contains water (H2O) and carbon dioxide (CO2). On the outer side, tube material was exposed to air. Oxides that formed on the air side under dual atmosphere conditions were significantly different from the oxide scales formed when the alloy was exposed to air only. It is assumed that the anomalous corrosion behavior during the dual atmosphere exposure is due to hydrogen and carbon diffusion through the bulk alloy from the combustion gas side to the air side. Both species are produced when the material reacts with the gas phase. Because of its high diffusivity, hydrogen is thought to affect the corrosion process on the air side from the beginning of the corrosion exposure, whereas carbon reaches the opposite side after a considerably longer time period. KW - Chromium steels KW - Corrosive gases KW - Dual atmosphere KW - High-temperature corrosion KW - Hydrogen transport KW - Mild steel PY - 2010 SN - 0010-9312 SN - 1938-159X VL - 66 IS - 12 SP - 126001-1 - 126001-7 PB - National Association of Corrosion Engineers CY - Houston, Tex. AN - OPUS4-23217 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ehrig, Karsten A1 - Bartscher, M. A1 - Goebbels, Jürgen A1 - Schulze, M. A1 - Staude, Andreas T1 - Dimensionelles Messen unter Phasenkontrast mit Synchrotron Computertomographie N2 - Phasenkontrastmessungen haben sich als hilfreich bei der Kantenfindung von Strukturen mit nur geringem Absorptionskontrast erwiesen. Solche Messungen können besonders gut mit monochromatischer Röntgenstrahlung hoher räumlicher Kohärenz durchgeführt werden, wie sie bei der Synchrotron- Computertomographie (SY-CT) benutzt wird. Nachteilig wirken sich allerdings die Phasenverschiebung des Synchrotronstrahls über das Strahlprofil und damit die Kantenverbreiterung in den zu untersuchenden Strukturen aus. Daher ist ein dimensionelles Messen mit normalen Rekonstruktionsverfahren nicht möglich. In der vorliegenden Arbeit werden neue Filterverfahren zur Korrektur der Phasenverschiebung unter Beibehaltung des erhöhten Kontrastes bei der Rekonstruktion angewandt, um ausgewählte einkomponentige Referenzobjekte hinsichtlich der dimensionellen Messeigenschaften zu untersuchen. Als Referenz werden rückgeführte Messungen mit taktilen Koordinatenmessmaschinen herangezogen. Die Untersuchungen wurden im freien Strahl durch Variation des Abstandes zwischen Objekt und Detektor am Strahlrohr der BAM am Helmholtz- Zentrum Berlin für Materialien und Energie - Speicherring BESSY II durchgeführt. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Di.2.A.3) SP - 1 EP - 9 CY - Berlin AN - OPUS4-23208 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ehrig, Karsten A1 - Ermel, C. T1 - Graph modelling and transformation: theory meets practice N2 - In this paper, we focus on the role of graphs and graph transformation for four practical application areas from software system development. We present the typical problems in these areas and investigate how the respective systems are modelled by graphs and graph transformation. In particular, we are interested in the usefulness of theoretical graph transformation results and graph transformation tools in order to solve these problems. Finally, we characterize concepts and tool features which are still missing in practice to solve the presented and related problems even better. KW - Graph modelling KW - Graph transformation KW - Graph transformation tools PY - 2010 UR - http://journal.ub.tu-berlin.de/index.php/eceasst/article/viewFile/423/409 SN - 1863-2122 VL - 30 SP - 1 EP - 21 PB - Techn. Univ. CY - Berlin AN - OPUS4-23209 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Matschulat, Andrea A1 - Drescher, Daniela A1 - Kneipp, Janina T1 - Surface-enhanced Raman scattering hybrid nanoprobe multiplexing and imaging in biological systems N2 - Surface-enhanced Raman scattering (SERS) labels and probes consisting of gold and silver nanoaggregates and attached reporter molecules can be identified by the Raman signature of the reporter molecule. At the same time, SERS hybrid probes deliver sensitive molecular structural information on their nanoenvironment. Here we demonstrate full exploitation of the multifunctional and multiplexing capabilities inherent to such nanoprobes by applying cluster methods and principal components approaches for discrimination beyond the visual inspection of individual spectra that has been practiced so far. The reported results indicate that fast, multivariate evaluation of whole sets of multiple probes is feasible. Spectra of five different reporters were shown to be separable by hierarchical clustering and by principal components analysis (PCA). In a duplex imaging approach in live cells, hierarchical cluster analysis, K-means clustering, and PCA were used for imaging the positions of different types of SERS probes along with the spectral information from cellular constituents. Parallel to cellular imaging experiments, cytotoxicity of the SERS hybrid probes containing aromatic thiols as reporters is assessed. The reported results suggest multiplexing applications of the nontoxic SERS nanoprobes in high density sensing and imaging in complex biological structures. KW - Surface-enhanced Raman scattering KW - Nanosensor KW - Para-aminobenzenethiol KW - 2-naphthalenethiol KW - 3T3 cells KW - Principal component analysis KW - Hierarchical cluster analysis KW - Cytotoxicity KW - Imaging PY - 2010 DO - https://doi.org/10.1021/nn100280z SN - 1936-0851 VL - 4 IS - 6 SP - 3259 EP - 3269 PB - ACS Publ. CY - Washington, DC, USA AN - OPUS4-23212 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kneipp, Janina A1 - Wittig, B. A1 - Bohr, H. A1 - Kneipp, Janina T1 - Surface-enhanced Raman scattering: a new optical probe in molecular biophysics and biomedicine N2 - Sensitive and detailed molecular structural information plays an increasing role in molecular biophysics and molecular medicine. Therefore, vibrational spectroscopic techniques, such as Raman scattering, which provide high structural information content are of growing interest in biophysical and biomedical research. Raman spectroscopy can be revolutionized when the inelastic scattering process takes place in the very close vicinity of metal nanostructures. Under these conditions, strongly increased Raman signals can be obtained due to resonances between optical fields and the collective oscillations of the free electrons in the metal. This effect of surface-enhanced Raman scattering (SERS) allows us to push vibrational spectroscopy to new limits in detection sensitivity, lateral resolution, and molecular structural selectivity. This opens up exciting perspectives also in molecular biospectroscopy. This article highlights three directions where SERS can offer interesting new capabilities. This includes SERS as a technique for detecting and tracking a single molecule, a SERS-based nanosensor for probing the chemical composition and the pH value in a live cell, and the effect of socalled surface-enhanced Raman optical activity, which provides information on the chiral organization of molecules on surfaces. KW - Nanosensor KW - Raman spectroscopy KW - Cells KW - Single molecule KW - Plasmonics PY - 2010 DO - https://doi.org/10.1007/s00214-009-0665-2 SN - 1432-881X VL - 125 IS - 3-6 SP - 319 EP - 327 PB - Springer CY - Berlin ; Heidelberg AN - OPUS4-23213 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kneipp, Janina A1 - Kneipp, H. A1 - Wittig, B. A1 - Kneipp, K. T1 - Following the dynamics of pH in endosomes of live cells with SERS nanosensors N2 - The surface enhanced Raman scattering (SERS) spectrum of a reporter molecule attached to gold or silver nanostructures, which is pH-sensitive, can deliver information on the local pH in the environment of the nanostructure. Here, we demonstrate the use of a mobile SERS nanosensor made from gold nanaoaggregates and 4-mercaptobenzoic acid (pMBA) attached as a reporter for monitoring changes in local pH of the cellular compartments of living NIH/3T3 cells. We show that SERS nanosensors enable the dynamics of local pH in individual live cells to be followed at subendosomal resolution in a timeline of cellular processes. This information is of basic interest for a better understanding of a broad range of physiological and metabolic processes as well as for a number of biotechnological applications. PY - 2010 DO - https://doi.org/10.1021/jp910034z SN - 1932-7447 SN - 1089-5639 VL - 114 IS - 16 SP - 7421 EP - 7426 PB - Soc. CY - Washington, DC AN - OPUS4-23214 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meinel, Dietmar A1 - Beck, Matthias A1 - Goebbels, Jürgen A1 - Hanke, Daniel T1 - Zeitlicher Verlauf von verdeckter Korrosion sichtbar gemacht mit Computertomographie N2 - Zwei Bildhauermodelle aus dem Georg-Kolbe-Museum Berlin standen zur Restaurierung an. Das kleinere, "Lucino" (1920), 41cm, wurde hochauflösend mit CT gemessen, da mittels CT sowohl der Herstellungsprozeß einer Gipsstatue als auch der innere Zustand, wie Ergänzungen, Klebungen und Armierungen, festgestellt werden können. Aus den CT Bildern ergab sich eine für die vorher vermutete Gipszusammensetzung ungewöhnliche innere Struktur. Mit einer Freihand bedienten Röntgenpistole zur Messung der Röntgenfluoreszenz wurde daraufhin die Zusammensetzung des Materials der Statuette als Terracotta bestimmt. Durch den Einsatz von Helium als Spülmittel konnten auch leichte Materialien nachgewiesen und so eine Unterscheidung zwischen Gips und gebranntem Ton durchgeführt werden. Aus den CT Daten wurde eine virtuelle Darstellung der äußeren Geometrie gewonnen. Ein damit versuchsweise erstelltes Replik (Rapid Prototyping, 3D-Drucker, TU-Berlin) entsprach nicht den Anforderungen des Museums zur Erstellung einer Gußform für eine Bronzekleinserie der Statuette. Die zweite Statue, die "Große Nacht" (1930) ist mit ihrer Größe von 2,12m und aufgrund des durch korrodierende Metallarmierung verursachten Schadensbildes nicht mehr transportfähig. Eine in-situ Untersuchung mit dem mobilen Tomographen, der in den 1980ern zur Untersuchung von Bäumen gebaut und jetzt mit einem modernen Flachdetektor und einer Röntgenröhre ausgestattet ist, wird vorgestellt. Die Möglichkeiten der in-situ CT für große Skulpturen werden anhand der Ergebnisse diskutiert. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Computertomographie KW - Korrosion PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Poster 11) SP - 1 EP - 8 CY - Berlin AN - OPUS4-23166 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schwab, R. A1 - Willer, F. A1 - Meinel, Dietmar A1 - Schmauder, M. A1 - Pernicka, E. T1 - The Oedt sword: a note on brass and fire-gilding in the European Bronze age KW - X-ray computer tomography KW - Image analysis KW - Sword KW - Fire-gilded metal PY - 2010 SN - 0142-3304 VL - 44 IS - 1 SP - 1 EP - 9 CY - London, UK AN - OPUS4-23188 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thiele, Joachim T1 - Conformity assessment of products - Categories to be distinguished - Structure of European mandatory CE marking and voltunary European marks as regional conformity marks for products T2 - Workshop on Development of the ASEAN Conformity Mark at 20th Meeting of ASEAN Consultative Committee on Standards and Quality, Working Group on Accreditation and Conformity Assessment CY - Bangkok, Thailand DA - 2010-11-03 PY - 2010 AN - OPUS4-23194 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thiele, Joachim T1 - National Accreditation Focal Points - Concept and practical implementation - Practical example T2 - Workshop on Development of the ASEAN Conformity Mark at 20th Meeting of ASEAN Consultative Committee on Standards and Quality, Working Group on Accreditation and Conformity Assessment CY - Bangkok, Thailand DA - 2010-11-03 PY - 2010 AN - OPUS4-23195 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank T1 - Aspekte der Konzeption der sicherheitstechnischen Nachweisführung - Mechanische Nachweisführung innerhalb der verkehrsrechtlichen Bauartprüfung T2 - 2. RAM-Behältersicherheitstage 2010, BAM CY - Berlin, Germany DA - 2010-03-18 PY - 2010 AN - OPUS4-23148 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weber, Gert A1 - Bschorr, T. A1 - Cramer, H. A1 - Hahn, Oliver A1 - Rethmeier, Michael A1 - Thommes, H. ED - da Silva, L.F.M. ED - Altenbach, H. T1 - Hybrid bonding of advanced high strength steels in the lightweight body shell design for the automobile manufacturing N2 - In the lightweight body shell mass production of automobiles, the application of hybrid bonding techniques becomes more and more important. Especially the combination of adhesive bonding and resistance spot welding called weldbonding is of great importance. The target of this contribution is to show the influence of medium-viscosity and low-viscosity structural adhesives on the process reliability of the weldbonding process and the mechanical properties of the hybrid bonded joints. The given results are based on the application of an epoxy PUR-based, an epoxy resin-based and a rubber-based adhesive system for joining a mild and some different advanced high strength steels (AHSS). It will be shown that both the process reliability of the weldbonding process and the mechanical behaviour of the weldbonded joints are influenced by the combinations of the base metals, the applied adhesive systems and the choice of the joining parameters. The behaviour of the weldbonded joints will be studied under quasi-static and impact loads. The discussion of the metallurgical structure of the weldbonded joints depending on the joining parameters will be given, too. Furthermore, the fatigue behaviour of the weldbonded joints will be studied. KW - Advanced high strength steels KW - Hybrid bonding KW - Lightweight body shell design KW - Weldbonding process reliability KW - Weldbonded joint behaviour PY - 2010 SN - 978-3-642-12666-6 DO - https://doi.org/10.1007/978-3-642-12667-3_22 N1 - Serientitel: Advanced Structured Materials – Series title: Advanced Structured Materials VL - 3 SP - 343 EP - 372 PB - Springer AN - OPUS4-23150 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schwenk, Christopher A1 - Rethmeier, Michael ED - Cerjak, H. ED - Enzinger, N. T1 - Structured approach for a transient 3D numerical welding simulation KW - Numerical welding simulation KW - Experimental validation KW - Temperature field KW - Welding distortion KW - Residual stress PY - 2010 SN - 978-3-85125-127-2 SP - 901 EP - 917 PB - Verlag der Technischen Universität Graz AN - OPUS4-23153 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pittner, Andreas A1 - Schwenk, Christopher A1 - Weiß, D. A1 - Rethmeier, Michael ED - Cerjak, H. ED - Enzinger, N. T1 - An efficient solution of the inverse heat conduction problem for welding simulation PY - 2010 SN - 978-3-85125-127-2 SP - 761 EP - 791 PB - Verlag der Technischen Universität Graz AN - OPUS4-23154 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thiele, Joachim T1 - The CE marking scheme T2 - Workshop on Development of the ASEAN Conformity Mark at 20th Meeting of ASEAN Consultative Committee on Standards and Quality, Working Group on Accreditation and Conformity Assessment CY - Bangkok, Thailand DA - 2010-11-03 PY - 2010 AN - OPUS4-23197 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thiele, Joachim T1 - The CE marking scheme T2 - Workshop at 19th Meeting of ASEAN Consultative Committee on Standards and Quality, Working Group on Accreditation and Conformity Assessment CY - Hanoi, Vietnam DA - 2010-01-27 PY - 2010 AN - OPUS4-23198 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wloka, Monika A1 - Bosch, W. T1 - Kompetenz von Laboratorien T2 - DIN Seminar CY - Berlin, Germany DA - 2010-11-11 PY - 2010 AN - OPUS4-23199 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wloka, Monika A1 - Bosch, W. T1 - Kompetenz von Laboratorien T2 - DIn Seminar Kompetenz v. Laboratorien DIN EN ISO/IEC 17025 CY - Dortmund, Germany DA - 2010-02-23 PY - 2010 AN - OPUS4-23200 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Woydt, Mathias A1 - Manier, Charles-Alix A1 - Weihnacht, V. A1 - Brückner, A. T1 - Wälzbeständigkeit von ta-C Dünnschichten unter hohen Hertzschen Beanspruchungen bis zu 3000 MPa KW - Wälzbeständigkeit KW - ta-C KW - a-C KW - Diamant KW - DLC KW - Überrollbeständigkeit KW - Friction KW - Laser-arc PY - 2010 SN - 0724-3472 VL - 57 IS - 6 SP - 30 EP - 36 PB - Expert Verlag CY - Renningen AN - OPUS4-23201 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Staude, Andreas A1 - Krah, T. A1 - Goebbels, Jürgen A1 - Büttgenbach, S. T1 - Ein dreidimensionaler Prüfkörper für die Lunkererkennung in Gussteilen mittels Computertomographie T2 - Fachtagung Industrielle Computertomografie - Zerstörungsfreie Bauteilprüfung, 3D-Materialcharakterisierung und Geometriebestimmung CY - Wels, Österreich DA - 2010-09-27 KW - Computertomographie KW - Gussteile KW - Gussdefekte KW - Lunker KW - Prüfkörper PY - 2010 SN - 978-3-8322-9418-2 SN - 1610-4773 SP - 79 EP - 84 PB - Shaker Verlag GmbH CY - Aachen AN - OPUS4-23176 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klinger, Christian A1 - Bettge, Dirk A1 - Häcker, Ralf A1 - Heckel, Thomas A1 - Gohlke, Dirk ED - Pohl, M. T1 - Schadensanalyse zum Radsatzwellenbruch ICE3 T2 - DGM-Tagung Werkstoffprüfung 2010 CY - Neu-Ulm, Deutschland DA - 2010-12-02 KW - Radsatzwellenbruch KW - Nichtmetallische Einschüsse KW - Reinheitsgrad KW - Ultraschall-Hohlwellenprüfung PY - 2010 SP - 235 EP - 239 AN - OPUS4-23855 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zencker, Uwe A1 - Weber, Mike A1 - Wille, Frank T1 - Finite element mesh design of a cylindrical cask under puncture drop test conditions N2 - Transport casks for radioactive materials have to withstand the 9 m drop test, 1 m puncture drop test and dynamic crush test with regard to the mechanical requirements according to the IAEA regulations. The safety assessment of the package can be carried out on the basis of experimental investigations with prototypes or models of appropriate scale, calculations, by reference to previous satisfactory safety demonstrations of a sufficiently similar nature or a combination of these methods. Computational methods are increasingly used for the assessment of mechanical test scenarios. However, it must be guaranteed that the calculation methods provide reliable results. Important quality assurance measures at BAM are given concerning the preparation, run and evaluation of a numerical analysis with reference to the appropriate guidelines. Hence, a successful application of the finite element method requires a suitable mesh. An analysis of the 1 m puncture drop test using successively refined finite element meshes was performed to find an acceptable mesh size and to study the mesh convergence using explicit dynamic finite element codes. The finite element model of the cask structure and the puncture bar is described. At the beginning a coarse mesh was created. Then this mesh was refined in two steps. In each step the size of the elements was bisected. The deformation of the mesh and the stresses were evaluated dependent on the mesh size. Finally, the results were extrapolated to an infinite fine mesh or the continuous body, respectively. The uncertainty of the numerical solution due to the discretization of the continuous problem is given. A safety factor is discussed to account for the uncertainty. The calculation results are compared with experimental data from a puncture drop test with a half-scale model of a cylindrical cask. This paper supports the convergence studies of the Task Group on Computational Modeling for Explicit Dynamics reporting to the ASME BPV Code Working Group on Design Methodology. T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - IAEA puncture drop test KW - Numerical analysis KW - Verification KW - Explicit dynamics PY - 2010 SP - 1 EP - 8 (Session T45 / Paper 219) AN - OPUS4-23843 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neser, A. A1 - Schreiber, D. A1 - Magallanes, J. A1 - Martinez, R. A1 - Zencker, Uwe A1 - Weber, Mike T1 - A material testing program to characterize the concrete behavior under static and dynamic loads N2 - In this paper a comprehensive material testing program is described to characterize a German final repository concrete material (BERB1) subjected to static and dynamic loads. The BERB1 material was developed und specified by the German Bundesanstalt für Materialforschung und -prüfung (BAM) for targets used for drop tests according to the KONRAD requirements. The testing consists of three concurrent laboratory experimental programs performed in the USA. An extensive preliminary testing program in Germany was performed to assure the required concrete specifications during fabrication and curing. The first set of data is the static basic material test program consisting of structural tests to quantify macroscopic concrete properties under quasi-static loads. Cubic and cylindrical specimens are investigated under this effort. The second set of test data is from the static complete material test program, where cylindrical concrete specimens are subjected to a variety of quasi-static axial and radial stress and strain paths using a high-pressure hydraulic tri-axial chamber. The material is characterized for confining pressures up to 400 MPa. The third set of data is from the dynamic complete material test program, which uses a modified Split-Hopkinson Pressure Bar to induce dynamic compression and tension waves into cylindrical concrete specimens that generate strain-rates up to 400 s-1. The ensemble of data generated in these experiments provides a complete set of data that effectively describes the behavior of this concrete and can be used to develop a constitutive calculation model. In addition, the results of the tests show a significant effect of moisture on the strength and rheology of this concrete for quasi-static pressures greater than 50 MPa. Numerical drop test simulations with the developed constitutive model in the Lagrangian finite element code, LS-DYNA, show good agreement with the experimental results from a BAM research project. T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Testing program KW - Concrete behavior KW - Static loads KW - Dynamic loads KW - KONRAD acceptance criteria KW - Ductile cast iron cask PY - 2010 SP - 1 EP - 8 (Session T40 / Paper 123) AN - OPUS4-23845 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Larissa A1 - Jakubowski, Norbert A1 - Roos, P. H. T1 - Multiplexed probing of antibodies using laser ablation ICP-MS T2 - 9. Symposium Massenspektrometrische Verfahren der Elementspurenanalyse und 22. ICP-MS-Anwendertreffen CY - Berlin, Germany DA - 2010-09-06 PY - 2010 N1 - Geburtsname von Müller, Larissa: Wäntig, L. - Birth name of Müller, Larissa: Wäntig, L. AN - OPUS4-23819 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nakagami, M. A1 - Quercetti, Thomas A1 - Komatsuki, S. A1 - Fujisawa, K. A1 - Nishio, T. A1 - Musolff, André A1 - Müller, Karsten A1 - Droste, Bernhard T1 - Waste container drop tests onto a concrete target N2 - The paper presents technical details of the drop test performance as well as some experimental results of tests carried out with the Japanese 'Yoyushindo-disposal' waste container for intermediate depth disposal. The tests were accompanied by various metrology to collect data as basis for safety assessment. T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Waste container KW - Drop test KW - Concrete target PY - 2010 SP - 1 EP - 8 (Paper 367) AN - OPUS4-27045 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rackwitz, Vanessa A1 - Procop, M. A1 - Hodoroaba, Vasile-Dan T1 - Characterization of polycapillary X-ray semilenses with SEM/EDX KW - Polycapillary X-ray optics KW - Semi-lens KW - Parallelising mode KW - SEM KW - EDS KW - Acceptance area KW - FWHM KW - Transmission KW - Focal distance KW - XRF PY - 2010 DO - https://doi.org/10.1017/S1431927610054280 SN - 1431-9276 SN - 1435-8115 VL - 16 IS - Suppl 2 SP - 932 EP - 933 PB - Cambridge University Press CY - New York, NY AN - OPUS4-27219 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hodoroaba, Vasile-Dan A1 - Rackwitz, Vanessa A1 - Reuter, Dirk T1 - Micro-focus X-ray fluorescence (mu-XRF) as an extension of the analytical SEM KW - mu-XRF KW - SEM KW - EDS PY - 2010 DO - https://doi.org/10.1017/S1431927610054115 SN - 1431-9276 SN - 1435-8115 VL - 16 IS - Suppl. 2 SP - 904 EP - 905 PB - Cambridge University Press CY - New York, NY AN - OPUS4-27220 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Paatsch, Wolfgang A1 - Beck, Uwe A1 - Baier, Jennifa T1 - Anwendungsorientierte Simulation zur Planung und Produktion maßgeschneiderter, elektrolytisch erzeugter Oberflächen - AnSim - Abschlussbericht des BMBF Verbundvorhabens 01RI0711A-J KW - Additive KW - Duktilität KW - Korrosionsbeständigkeit PY - 2010 UR - http://edok01.tib.uni-hannover.de/edoks/e01fb11/669247707.pdf SP - 1 EP - 160 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25470 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marklein, R. A1 - Rahman, Mehbub-Ur A1 - Miao, J. T1 - Applied modeling and inverse profiling in electromagnetic non-destructive evaluation N2 - This paper presents three examples of applied numerical modeling and inverse profiling in electromagnetic non-destructive testing. In the first example, we discuss numerical modeling and optimization of eddy current sensors for in-line inspection of hot wire steel. To detect longitudinal cracks a series of new sensors are modelled and optimized by numerical modeling and is successfully tested. The second example presents the application of a time-domain technique to reconstruct the unknown permittivity and electric conductivity profile of a onedimensional slab of finite length. The inverse scattering problem is solved by an Invariant Embedding Method which requires a finite time trace of reflection data and therefore is suitable for reconstructing the material parameters in real-time. The implemented method is validated against synthetic and measured Time Domain Reflectometry data. The third example demonstrates the application of the Contrast Source Inversion method to reconstruct the 2-D permittivity profile of a beech tree. Thus, the discussed applications present an identified need of numerical modeling and inverse profiling in electromagnetic non-destructive evaluation. T2 - EMTS 2010 - 20th International URSI symposium on electromagnetic theory CY - Berlin, Germany DA - 2010-08-15 PY - 2010 SN - 978-1-4244-5153-1 IS - P980 SP - 980 EP - 983 AN - OPUS4-25351 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaal, Mate A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Brekow, Gerhard T1 - Einsatz von Luftultraschall-Sensoren mit geringer akustischer Impedanz T2 - DAGA 2010 - 36. Jahrestagung für Akustik CY - Berlin, Deutschland DA - 2010-03-15 KW - Luftultraschall KW - Sensor KW - Akustische Impedanz KW - Polypropylen PY - 2010 SN - 978-3-9808659-8-2 SP - 1041 EP - 1042 CY - Berlin AN - OPUS4-26402 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaal, Mate A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Brekow, Gerhard T1 - Entwicklung von Luftschall-Sensoren mit geringer akustischer Impedanz T2 - Sensoren und Messsysteme 2010 - 15. ITG/GMA-Fachtagung CY - Nürnberg, Deutschland DA - 2010-05-18 KW - Luftultraschall KW - Sensor KW - Akustische Impedanz KW - Polypropylen PY - 2010 SN - 978-3-8007-3260-9 IS - A9/Paper 48 SP - 275 EP - 279 PB - VDE Verlag GmbH CY - Berlin, Offenbach AN - OPUS4-26407 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dengel, Jörg T1 - The Witness - Screen Test T2 - CEN/TC 212/WG 5 - Other pyrotechnic articles CY - Delft, Netherlands DA - 2010-11-22 PY - 2010 AN - OPUS4-30604 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - The functional profile of polyglycols in engine applications T2 - 17th International colloquium tribology CY - Esslingen, Germany DA - 2010-01-19 KW - Bionotox KW - Heat capacity KW - Fuel economy KW - Drain Polyglycol KW - Polypropylene glycol KW - Polyalkylene glycol KW - Polybutylene glycol KW - BAM test KW - AlSi liner wear KW - DLC KW - Slip-rolling KW - Lubricants KW - Engine oil KW - Additives KW - Ester KW - Thin film coatings KW - Dilution KW - FAME KW - Jatropha KW - Rape seed KW - Stem valve KW - Piston ring PY - 2010 SP - 17_Woydt_Polyglycols, 1 EP - 11 AN - OPUS4-31736 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaenisch, Gerd-Rüdiger A1 - Deresch, Andreas A1 - Bellon, Carsten A1 - Warrikhoff, A. T1 - Optimization of X-Ray sources by modeling T2 - The 10th European conference on NDT and technical diagnostics CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-19801 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaenisch, Gerd-Rüdiger A1 - Bellon, Carsten A1 - Ewert, Uwe T1 - Simulation supported reliability analysis in radiography T2 - The 10th European conference on NDT and technical diagnostics CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-19802 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaenisch, Gerd-Rüdiger A1 - Ewert, Uwe A1 - Jechow, Mirko T1 - Scatter radiation in radiography T2 - The 10th European conference on NDT and technical diagnostics CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-19803 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaenisch, Gerd-Rüdiger A1 - Zhukovskiy, M. A1 - Bellon, Carsten A1 - Deresch, Andreas A1 - Skachkov, M. T1 - Monte Carlo Simulating the electron emission from surfaces of objects being under radiation T2 - The 10th European conference on NDT and technical diagnostics CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-19804 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maziere, Matthieu A1 - Fedelich, Bernard T1 - Simulation of fatigue crack growth by crack tip plastic blunting using cohesive zone elements T2 - Tagung Fatigue 2010 CY - Prague, Czech Republic DA - 2010-06-06 PY - 2010 AN - OPUS4-19829 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe A1 - Baier, Jennifa A1 - Hertwig, Andreas A1 - Krüger, Hannes A1 - Sahre, Mario A1 - Stephanowitz, Ralph A1 - Weise, Matthias T1 - Optical Mapping and Imaging for Quality Control of Thin Films and Surfaces T2 - ICCG 8, The 8th International Conference on Coatings on Glass and Plastics - Advanced Coatings for Large Area or High-Volume Products CY - Braunschweig, Germany DA - 2010-06-13 PY - 2010 AN - OPUS4-21586 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Askar, Enis A1 - Schröder, Volkmar A1 - Steinbach, J. ED - Suter, G. ED - de Rademaeker, E. T1 - Calculation of explosion regions of gas mixtures T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - Kohlenwasserstoffe KW - Instabile Gase KW - Ethylenoxid Inertisierung KW - Sicherheitstechnik KW - Explosionsgrenzen PY - 2010 SN - 978-90-76019-291 SP - 141 EP - 148 CY - Brugge, Belgium AN - OPUS4-21587 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Frunza, S. A1 - Schönhals, Andreas A1 - Frunza, L. A1 - Beica, T. A1 - Zgura, I. A1 - Ganea, P. A1 - Stoenescu, D. T1 - Dynamics of cyanophenyl alkylbenzoate molecules in the bulk and in a surface layer adsorbed onto aerosil. Variation of the lengths of the alkyl chain N2 - The molecular mobility of 4-butyl- and 4-pentyl-4'-cyanophenyl benzoate (CP4B, CP5B) and their composites prepared from aerosil A380 was investigated by broadband dielectric spectroscopy in a large temperature range. Thermogravimetric and infrared investigations were additionally performed. High silica density (larger than 7 g aerosil/1 g of liquid crystal) was selected to observe a thin layer adsorbed on the surface of the silica particles. The data were compared with those of the member of the series with six carbon atoms in the alkyl tail. Bulk CP4B and CP5B show the dielectric behaviour expected for liquid crystals. For the composites one relaxation process is observed at frequencies much lower than those for the corresponding bulk, which was assigned to the dynamics of the molecules in a surface layer. The temperature dependence of the relaxation rates (and of the dielectric strength) shows a crossover behaviour with two distinguished regimes. At higher temperatures the data obey the Vogel-Fulcher-Tammann law, whereas an Arrhenius law is observed at lower temperature, in a close similarity to the behaviour of a constrained dynamic glass transition. The estimated Vogel and crossover temperature is independent on the tail length, while the activation energy for the low temperature branch increases weakly with increasing the alkyl tail. KW - Confined liquid crystals KW - Molecules at surfaces KW - Dielectric properties KW - Relaxation processes KW - Glassy dynamics KW - Crossover phenomenon PY - 2010 DO - https://doi.org/10.1016/j.chemphys.2010.04.031 SN - 0301-0104 SN - 1873-4421 VL - 372 IS - 1-3 SP - 51 EP - 60 PB - Elsevier CY - Amsterdam AN - OPUS4-21588 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Kupsch, Andreas T1 - Enhanced Spatial Resolution Using Iterative Focal Desmearing in Computed Tomography T2 - ECNDT 10 CY - Moscow, Russia DA - 2010-06-08 PY - 2010 AN - OPUS4-21589 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ewers, Benjamin A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. T1 - Terahertz Spectral Imaging Techniques in NDT: Topography and Computed Tomography T2 - ECNDT 10 CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-21590 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Shokouhi, Parisa A1 - Zoëga, Andreas A1 - Wiggenhauser, Herbert T1 - Nondestructive investigation of stress-induced damage in concrete N2 - The changes in the sonic surface wave velocity of concrete under stress were investigated in this paper. Surface wave velocities at sonic frequency range were measured on a prismatic concrete specimen undergoing several cycles of uniaxial compression. The loading was applied (or removed) gradually in predefined small steps (stress-controlled). The surface wave velocity was measured at every load step during both loading and unloading phases. Acoustic Emission (AE) test was conducted simultaneously to monitor the microcracking activities at different levels of loading. It was found that the sonic surface wave velocity is highly stress dependent and the velocity-stress relationship follows a particular trend. The observed trend could be explained by a combination of acoustoelasticity and microcracking theories, each valid over a certain range of applied stresses. Having measured the velocities while unloading, when the material suffers no further damage, the effect of stress and damage could be differentiated. The slope of the velocity-stress curves over the elastic region was calculated for different load cycles. This quantity was normalized to yield a dimensionless nonlinear parameter. This parameter generally increases with the level of induced damage in concrete. KW - Nondestructive testing (NDT) KW - Surface wave velocity KW - Concrete KW - Acoustoelasticity KW - Microcracking PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-215943 UR - http://downloads.hindawi.com/journals/ace/2010/740189.pdf DO - https://doi.org/10.1155/2010/740189 SN - 1687-8094 SN - 1687-8086 VL - 2010 IS - Article ID 740189 SP - 1 EP - 9 PB - Hindawi Publ. Corp. CY - New York, NY, USA AN - OPUS4-21594 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Resch-Genger, Ute A1 - Hoffmann, Katrin A1 - Würth, Christian A1 - Behnke, Thomas A1 - Hoffmann, Angelika A1 - Pfeifer, Dietmar A1 - Engel, A. T1 - The toolbox of fluorescence standards: Flexible calibration tools for the standardization of fluorescence-based measurements N2 - To improve the reliability of fluorescence data in the life and material sciences and to enable accreditation of fluorescence techniques, standardization concepts are required that guarantee and improve the comparability of fluorescence measurements. At the core of such concepts are simple and evaluated fluorescence standards for the consideration of instrument-specific spectral and intensity distortions of measured signals and for instrument performance validation (IPV). Similarly in need are fluorescence intensity standards for the quantification from measured intensities and for signal referencing, thereby accounting for excitation light-induced intensity fluctuations. These standards should be preferably certified, especially for use in regulated areas like medical diagnostics. This encouraged us to develop liquid and solid standards for different fluorescence parameters and techniques for use under routine measurement conditions in different formates. Special emphasis was dedicated to the determination and control of the spectral responsivity of detection systems, wavelength accuracy, homogeneity of illumination, and intensity referencing for e.g. spectrofluorometers, fluorescence sensors and confocal laser scanning fluorescence microscopes. Here, we will present design concepts and examples for mono- and multifunctional fluorescence standards that provide traceability to radiometric units and present a first step towards a toolbox of standards. KW - Fluorescence KW - Fluorescence standard KW - Calibration tool KW - Spectral fluorescence standard KW - Intensity standard KW - Instrument performance validation KW - Quality assurance KW - Traceability KW - Glass KW - Liquid standard PY - 2010 DO - https://doi.org/10.1117/12.853133 SN - 0277-786X SN - 0038-7355 SN - 0361-0748 VL - 7666 IS - 76661J SP - 1 EP - 12 PB - Soc. CY - Redondo Beach, Calif. [u.a.] AN - OPUS4-21595 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hoffmann, Katrin A1 - Sewohl, Dirk A1 - Resch-Genger, Ute T1 - Evaluation of Lanthanide-doped Glasses for Use as standards in Fluorometry T2 - First International Conference on Luminescence of Lanthanides CY - Odessa, Ukraine DA - 2010-09-05 PY - 2010 AN - OPUS4-21566 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Nöther, Nils A1 - Schukar, Marcus A1 - Wendt, Mario A1 - Witt, Jens A1 - Wosniok, Aleksander T1 - Technology and applications of smart technical textiles based on fibre optic sensors N2 - Technical textiles with embedded fibre optic sensors habe been developed for the purposes of the structural health monitoring in geotechnical and civil engineering as well as for healthcare monitoring in the medical sector. The paper shows selected examples of using such sensor-based smart textiles for different applications. T2 - International conference "Optical sensors" CY - Karlsruhe, Germany DA - 2010-06-21 PY - 2010 IS - STuC2.pdf SP - 1 EP - 2(?) AN - OPUS4-21567 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meyer-Plath, Asmus A1 - Oleszak, Franz A1 - Maneck, Heinz-Eberhard A1 - Mach, Reinhard T1 - Highly effective purification of carbon nanotubes by plasma-thermal annealing T2 - NT 10 - 11th International Conference on the Science and Application of Nanotubes CY - Montreal, Canada DA - 2010-06-27 PY - 2010 AN - OPUS4-21568 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Cuéllar, Pablo A1 - Pastor, M. A1 - Mira, P. A1 - Fernández-Merodo, J.A. A1 - Baeßler, Matthias A1 - Rücker, Werner ED - Benz, T. ED - Nordal, S. T1 - Numerical investigations for the pile foundation of an offshore wind turbine under transient lateral load N2 - Numerical analysis can be useful for the investigation of important aspects of offshore foundation prototypes that otherwise could hardly be studied experimentally, like the evolution of pore-water pressure around the monopile foundation of an offshore wind turbine under extreme loading. A combination of mixed pressuredisplacement formulations along with a constitutive model for sands based on the Generalized Plasticity Theory can replicate accurately the soil behaviour in saturated conditions. However, additional issues must be taken into account in order to perform numerical simulations of offshore piles. Some implications of the Babuska-Brezzi restriction, as well as considerations about the pile-soil interface and suitable solution strategies are discussed here. Due to the high cost of the transient analysis, the parallel computation offers a promising perspective, but can be complex and needs to be implemented carefully in order to avoid a performance deterioration. A brief overview on current trends and functional software is given here. T2 - 7th European conference on numerical methods in geotechnical engineering (NUMGE 2010) CY - Trondheim, Norway DA - 2010-06-02 KW - Offshore pile foundation KW - Cyclic lateral load KW - Pore pressure accumulation PY - 2010 SN - 978-0-415-59239-0 SP - 913 EP - 919 PB - Taylor & Francis AN - OPUS4-21572 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klimakow, Maria A1 - Emmerling, Franziska A1 - Rössler, E. A1 - Rademann, K. A1 - Heidenreich, A. A1 - Ugalde, J. T1 - A first (1:1)-nifedipine pseudo-polymorph: (CH3)2S=O compared to (CH3)2C=O T2 - 2010 Annual Conference of the British Association for Crytal Growth CY - Manchester, England DA - 2010-09-05 PY - 2010 AN - OPUS4-21557 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Brauser, Stephan A1 - Pepke, Lutz-Alexander A1 - Weber, Gert A1 - Rethmeier, Michael A1 - Göklü, S. T1 - Einfluss der Schweißstromform auf die Schweißbereiche und die Festigkeit beim Widerstandpunktschweißen moderner Automobilwerkstoffe T2 - 21. DVS-Sondertagung "Widerstandsschweissen 2010" CY - Duisburg, Deutschland DA - 2010-05-05 KW - Widerstandschweißen KW - Schweißbereiche KW - Anlagenkonfiguration KW - Schwingfestigkeit PY - 2010 SP - 1 EP - 7(?) CY - Duisburg AN - OPUS4-21561 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Huismann, Sven A1 - Korzen, Manfred A1 - Schneider, U. ED - Kodur, V. ED - Franssen, J.-M. T1 - A material model for the numerical simulation of high strength concrete columns subjected to fire loading T2 - 6th International conference "Structures in fire" CY - East Lansing, Michigan, USA DA - 2010-06-02 KW - High performance concrete KW - Columns KW - Fire KW - High temperatures KW - Numerical modelling KW - Numerical simulation PY - 2010 SN - 978-1-60595-027-3 SP - 312 EP - 319 PB - DEStech Publications, Inc. CY - Lancaster, PA, USA AN - OPUS4-21562 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Huismann, Sven A1 - Weise, Frank A1 - Meng, Birgit A1 - Schneider, U. ED - Kodur, V. ED - Franssen, J.-M. T1 - Influence of polypropylene fibres on the thermal strain of high strength concrete at high temperatures T2 - 6th International conference "Structures in fire" CY - East Lansing, Michigan, USA DA - 2010-06-02 KW - High performance concrete KW - High temperatures KW - Polypropylene fibres KW - Thermal strain KW - Acoustic emission KW - Ultrasound PY - 2010 SN - 978-1-60595-027-3 SP - 719 EP - 726 PB - DEStech Publications, Inc. CY - Lancaster, PA, USA AN - OPUS4-21563 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Hannes A1 - Hertwig, Andreas A1 - Beck, Uwe A1 - Kemnitz, E. T1 - Low temperature sol-gel metal oxide and fluoride layer stacks for optical applications N2 - MgF2 and TiO2 single layers and layer stacks were produced by a spin-coating sol-gel process. The final temperature treatment was carried out at 100 °C. The layers were deposited onto silicon and fused silica substrates and were analysed by means of atomic force microscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, ellipsometry, and UV-vis transmission spectroscopy. MgF2 and TiO2 single layers have morphological and optical properties comparable with physical vapour deposited layers. By using spectroscopic mapping ellipsometry, a good inter- and intra-sample homogeneity was confirmed. Multiple deposition steps result in a linear increase of layer thickness. Various films were deposited with thicknesses between 25 nm and 350 nm. It was shown that the low temperature sol-gel process results in films of optical quality. Anti-reflective and high reflective layer stacks consisting of MgF2 and TiO2 were designed and can be produced now by a sol-gel process, whereas the MgF2 layers in the layer stacks contains also traces of MgF2-2xOx. KW - Magnesium fluoride KW - Titanium oxide KW - Sol-gel KW - Spin-coating KW - Optical properties KW - Optical layer stacks KW - MgF2 KW - TiO2 PY - 2010 DO - https://doi.org/10.1016/j.tsf.2010.06.025 SN - 0040-6090 VL - 518 IS - 21 SP - 6080 EP - 6086 PB - Elsevier CY - Amsterdam AN - OPUS4-21516 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beckmann, Jörg A1 - Kupsch, Andreas A1 - Ewers, Benjamin A1 - von Chrzanowski, Lars A1 - Ewert, Uwe T1 - Application of Time Domain THz Spectroscopy for Non Destructive Contactless Inspection of Non-Metallic Materials and Substances T2 - Far East Forum On Nondestructive Evaluation/Testing: New Technology & Application CY - Kunshan, China DA - 2010-05-26 PY - 2010 AN - OPUS4-21517 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Arlt, Tobias A1 - Grothhausmann, Roman A1 - Markötter, H. A1 - Timpel, M. A1 - Zils, Susanne A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Wippermann, K. T1 - Tomographic methods for investigation for fuel cell materials T2 - Ulm Electro Chemical Talks CY - Ulm, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-21518 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Manke, I. A1 - Kardjilov, N. A1 - Arlt, Tobias A1 - Grothhausmann, Roman T1 - Reconstruction of limited CT data of fuel cell components using DIRECTT T2 - Ulm Electro Chemical Talks CY - Ulm, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-21519 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Perret, Birgit A1 - Stöß, K. A1 - Diederichs, J. A1 - Ciesielski, M. A1 - Döring, M. A1 - Krämer, J. A1 - Altstädt, V. T1 - Novel phosphorous-based flame retardants for epoxy resins and their carbon fibre reinforced composites in automotive and aviation industry T2 - 14th European Conference on Composite Materials, ECCM CY - Budapest, Hungary DA - 2010-06-07 PY - 2010 AN - OPUS4-21520 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gonzalez-Gil, G. A1 - Noll, Matthias A1 - Lochmatter, S. A1 - Zanoletti, O. A1 - Holliger, C. T1 - The carbon source governs the population dynamics of phosphate accumulating organisms in aerobic granules T2 - Swiss Microbiology 69th annual assembly CY - Zurich, Switzerland DA - 2010-06-24 PY - 2010 AN - OPUS4-21521 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dümichen, Erik A1 - Braun, Ulrike A1 - Senz, R. T1 - Investigation of a flame retardant high-temperature polyamide T2 - Tag der Chemie CY - Berlin, Germany DA - 2010-06-16 PY - 2010 AN - OPUS4-21522 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maskos, Michael A1 - Bantz, C. A1 - Noskov, Sergey A1 - Scherer, Christian A1 - Utech, St. T1 - Polymeric Nanoparticles: Chances and Challenges T2 - Tag der Chemie CY - Berlin, Germany DA - 2010-06-16 PY - 2010 AN - OPUS4-21523 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilrich, Cordula A1 - Wehrstedt, Klaus-Dieter ED - Suter, G. ED - de Rademaeker, E. T1 - Examples for the influence of non-intrinsic properties on the classification of physical hazards according to the UN-GHS T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - UN-GHS KW - GHS KW - Chemikalieneinstufung KW - Classification of chemicals KW - Physikalische Gefahren KW - Physical hazards PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 395 EP - 398 CY - Brugge, Belgium AN - OPUS4-21525 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Resch-Genger, Ute A1 - Hoffmann, Katrin A1 - Würth, Christian A1 - Hoffmann, Angelika T1 - Method-adaptable Fluorescence Standarts as Flexible Calibration Tools for the Standardization of Fluorescence-Based Measurements T2 - SPIE Biodefense CY - Orlando, FL, USA DA - 2010-04-05 PY - 2010 AN - OPUS4-21546 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Resch-Genger, Ute A1 - Hoffmann, Angelika A1 - Hoffmann, Katrin T1 - Fluorescence Standards at BAM - Strategies for the Design, Characterization and Validation of Calibration Tools for the Standartization of Fluorescence Measurements T2 - Workshop zur Kalibrierung von Microarray-Scannern CY - Berlin, Germany DA - 2010-02-26 PY - 2010 AN - OPUS4-21547 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Behnke, Thomas A1 - Hoffmann, Katrin A1 - Resch-Genger, Ute T1 - Preparation, Characterization, and Bioanalytical Applications of Fluorescent Nano- and Micrometer-sized Particles T2 - Tag der Chemie CY - Berlin, Germany DA - 2010-06-16 PY - 2010 AN - OPUS4-21550 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter A1 - Schönbucher, A. ED - Suter, G. ED - de Rademaeker, E. T1 - Characterization of large pool fires of organic compounds containing oxygen atoms T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - Pool fire KW - Hydrocarbons KW - Alcohols KW - Ketones KW - Organic peroxides KW - Fire characteristics PY - 2010 SN - 978-90-76019-291 VL - I SP - 365 EP - 372 CY - Brugge, Belgium AN - OPUS4-21552 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kocun, M. A1 - Mueller, W. A1 - Maskos, Michael A1 - Mey, I. A1 - Geil, B. A1 - Steinem, C. A1 - Janshoff, A. T1 - Viscoelasticity of pore-spanning polymer membranes derived from giant polymersomes N2 - We show how the viscoelastic properties of membranes formed from poly(butadiene)-block-poly(ethylene oxide) (PB130-b-PEO66) block copolymers can be locally accessed by atomic force microscopy. Polymer membranes are spread on microstructured porous silicon substrates from PB130-b-PEO66 vesicles by decreasing the osmotic pressure of the solution. Local viscoelastic properties of the pore-spanning polymer membranes were obtained from site-specific indentation experiments. Elastic moduli of these membranes were in the order of few MPa, while the elastic moduli of cross-linked membranes considerably increased to few GPa. Furthermore, the energy dissipation and velocity dependence of the hysteresis between indentation and relaxation were quantified and compared with a modified Kelvin-Voigt model. Relaxation times were in the order of hundreds of milliseconds explaining why the stiffness of the membrane increases with increasing indentation velocity. PY - 2010 DO - https://doi.org/10.1039/b924650a SN - 1744-683X VL - 6 SP - 2508 EP - 2516 PB - RSC Publ. CY - Cambridge AN - OPUS4-21553 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Drescher, Daniela A1 - Matschulat, Andrea A1 - Kneipp, Janina T1 - Surface-enhanced Raman spectrscopy for intracellular probing of nanoparticle interactions with eukaryotic cells T2 - Analytica Conference CY - Munich, Germany DA - 2010-03-22 PY - 2010 AN - OPUS4-21597 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herter, Jürgen A1 - Mehdianpour, Milad A1 - Hille, Falk T1 - Repair of a railway viaduct in Berlin and inspection concepts to extend the service life. T2 - International Conference "Structural Faults & Repair - 2010" CY - Edinburgh, Scotland DA - 2010-06-15 PY - 2010 AN - OPUS4-21526 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - Vortrag zu Thema Energieffizienzanforderungen für Elektromotoren T2 - 4. VEM Antriebstag CY - Wernigerode, Germany DA - 2010-06-22 PY - 2010 AN - OPUS4-21527 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cuéllar, Pablo A1 - Rücker, Werner A1 - Baeßler, Matthias A1 - Pastor, M. A1 - Mira, P. A1 - Fernández-Merodo, J.A. T1 - Numerical investigations for the pile foundation of an offshore wind turbine under transient lateral load. T2 - 7th European Conference on Numerical Methods in Geotechnical Engineering, NUMGE 2010 CY - Trondheim, Norway DA - 2010-06-04 PY - 2010 AN - OPUS4-21528 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gebert, Antje T1 - Mein Weg zur BAM - Als Nachwuchswissenschaftlerin an der Bundesanstalt für Materialforschung und -prüfung T2 - Mentorinnen-Seminar für Doktorandinnen der Universität Freiburg CY - Freiburg, Germany DA - 2010-07-16 PY - 2010 AN - OPUS4-21529 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Denkler, Tilman T1 - D-A-C-H common training system for assessors T2 - Round table meeting of Accreditation Bodies of South East Europe PTB-Project "Promotion of the regional co-operation of the countries in South-Eastern Europe in the field of Quality Infrastructure" CY - Tirana, Albania DA - 2010-06-09 PY - 2010 AN - OPUS4-21530 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grätz, Rainer T1 - Gesetzliche Grundlagen und Konformitätsbewertung im nicht-elektrischen Explosionsschutz T2 - Seminar "Aktueller Gasexplosionsschutz" CY - Essen, Germany DA - 2010-06-23 PY - 2010 AN - OPUS4-21531 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunewald, Thomas T1 - Nichtelektrischer Explosionsschutz mit Bezug zur EN 13463-1 T2 - Firmenseminar bei der Firma Gassco AS, Zweigniederlassung Deutschland (Kurzvortrag) CY - Emden, Germany DA - 2010-06-24 PY - 2010 AN - OPUS4-21532 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunewald, Thomas T1 - Explosionsgefahr durch mechanisch erzeugte Funken? T2 - Firmenseminar für Betriebsfachleute bei der Fa. Gassco AS, Zweigniederlassung Deutschland (Hauptvortrag) CY - Emden, Germany DA - 2010-06-24 PY - 2010 AN - OPUS4-21533 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Ulrich T1 - Fundamentals of fire evolution of solid flammable matters T2 - EUSAS Conference ob fire Detection: State of the Art and Future Development CY - Zug, Switzerland DA - 2010-06-24 PY - 2010 AN - OPUS4-21534 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von der Ehe, Kerstin A1 - Jaunich, Matthias A1 - Wolff, Dietmar A1 - Böhning, Martin A1 - Goering, Harald T1 - Radiation induced structural changes of (U)HMW polyethylene with regard to its application for radiation shielding T2 - 16th International Symposium on the Packaging and Transport of Radioactive Materials CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-21539 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Docter, D. A1 - Knauer, S. A1 - Bier, C. A1 - Bantz, C. A1 - Schweitzer, A. A1 - Kraegeloh, A. A1 - Landfester, K. A1 - Galla, H.-J. A1 - Maskos, Michael T1 - The apoptosis inhibitor protein survivin is a critical cytoprotective resistor against silica-based nanotoxicity T2 - Nanotoxicology 2010 CY - Edinburgh, Scotland DA - 2010-06-02 PY - 2010 AN - OPUS4-21540 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Resch-Genger, Ute T1 - Labels and Probes For Molecular Imaging: Design Principles, Spectroscopic Characterization and Current Research Activities at BAM T2 - Eingeladener Vortrag CY - Göttingen, Germany DA - 2010-05-31 PY - 2010 AN - OPUS4-21542 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Resch-Genger, Ute A1 - Pauli, Jutta T1 - Characterization and evaluation of a tumor specific RGD optical probe for timedomain near-infrared fluorescence imaging T2 - 5th European Molecular Imaging Meeting CY - Warsaw, Poland DA - 2010-05-26 PY - 2010 AN - OPUS4-21543 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Resch-Genger, Ute A1 - Pauli, Jutta A1 - Grabolle, Markus A1 - Brehm, Robert A1 - Hennig, Andreas A1 - Würth, Christian A1 - Hoffmann, Katrin A1 - Behnke, Thomas T1 - Molecular and Particulate Labels and Probes for Optical Imaging T2 - Exzellenzakademie Medizintechnik: Krankheitsspezifische & molekulare Bildgebung CY - Aachen, Germany DA - 2010-04-26 PY - 2010 AN - OPUS4-21544 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hennig, Andreas T1 - Molecular invivo imaging - A multidimensional disassemble approach towards exticiently quenchud NIRProbes T2 - Exzellenzakademie Medizintechnik: Krankheitsspezifische & molekulare Bildgebung CY - Aachen, Germany DA - 2010-04-26 PY - 2010 AN - OPUS4-21545 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ostermann, Markus A1 - Mans, C. A1 - Hanning, S. A1 - Kreyenschmidt, M. T1 - Kunststoffreferenzmaterialien für die RFA - Zertifizierung der Elementgehalte in BAMH010 T2 - Panalytical Anwendertreffen CY - Fulda, Germany DA - 2010-06-08 PY - 2010 AN - OPUS4-21577 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kneipp, Janina A1 - Merk, Virginia A1 - Drescher, Daniela A1 - Kneipp, H. A1 - Kneipp, K. A1 - Gühlke, Marina A1 - Gnutzmann, Tanja A1 - Matschulat, Andrea T1 - Surface-enhanced Raman scattering for bioanalytical chemistry T2 - Analytica CY - Munich, Germany DA - 2010-03-23 PY - 2010 N1 - Geburtsname von Merk, Virginia: Joseph, V. - Birth name of Merk, Virginia: Joseph, V. AN - OPUS4-21578 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bremser, Wolfram T1 - Traceability and certified reference materials T2 - Int. Symposium on Reference Materials "REMO in China" CY - Hangzhou, China DA - 2010-05-07 PY - 2010 AN - OPUS4-21579 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bremser, Wolfram T1 - Reference materials categorisation - an everlasting story? T2 - Int. Symposium on Reference Materials "REMO in China" CY - Hangzhou, China DA - 2010-05-07 PY - 2010 AN - OPUS4-21580 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Matschulat, Andrea A1 - Drescher, Daniela A1 - Kneipp, Janina T1 - Multivariate analysis for surface-enhanced Raman scatterin (SERS) probe multiplexing and imaging in biological matrics T2 - DPG-Frühjahrstagung Sektion: Kondensierte Materie CY - Regensburg, Germany DA - 2010-03-21 PY - 2010 AN - OPUS4-21581 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Merk, Virginia A1 - Kneipp, Janina T1 - Design and characterization of new SERS substrates for analytical applications T2 - Analytica CY - Munich, Germany DA - 2010-03-23 PY - 2010 N1 - Geburtsname von Merk, Virginia: Joseph, V. - Birth name of Merk, Virginia: Joseph, V. AN - OPUS4-21582 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bäßler, Ralph A1 - Burkert, Andreas A1 - Saadat, A. A1 - Kirchheiner, R. A1 - Finke, M. T1 - Evaluation of corrosion resistance of materials for geothermal applications T2 - X. Internat. Korrosionskonferenz CY - Lviv, Ukraine DA - 2010-06-08 PY - 2010 AN - OPUS4-21584 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Askar, Enis A1 - Schröder, Volkmar A1 - Steinbach, J. T1 - Calculation of Explosion Regions of Gas Mixtures T2 - 13th International Symposium on Loss Prevention and Safety Promotion in the Process Industries CY - Bruges, Belgium DA - 2010-06-07 PY - 2010 AN - OPUS4-21585 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mietz, Jürgen A1 - Burkert, Andreas A1 - Lehmann, Jens A1 - Eich, G. ED - Castro-Borges, P. ED - Moreno, E.I. ED - Sakai, K. ED - Gjorv, O.E. ED - Banthia, N. T1 - Risk of stress corrosion cracking of prestressing steels in contact with galvanized components T2 - CONSEC`10 - 6th International conference on concrete under severe conditions CY - Mérida, Yucatán, Mexico DA - 2010-06-07 KW - Prestressing steel KW - Galvanized elements KW - Galvanic corrosion KW - Hydrogen evolution KW - Hydrogen-induced stress corrosion cracking PY - 2010 SN - 978-0-415-59316-8 VL - 1 SP - 239 EP - 246 PB - Taylor & Francis CY - London, UK AN - OPUS4-22037 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tikhomirov, D. A1 - Schwenk, Christopher T1 - Efficient numerical welding simulation through standardisation KW - Schweißen KW - Simulation KW - Normung PY - 2010 SN - 1612-3433 VL - 9 IS - 5 SP - 292 EP - 295 PB - DVS - German Welding Society CY - Düsseldorf AN - OPUS4-22038 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Häcker, Ralf A1 - Wossidlo, Peter A1 - Knothe, Esther T1 - Experimentelle Untersuchungen für die Anwendung von Materialmodellen zur numerischen Auslegung des Containments von Abgasturboladern T2 - Tagung Werkstoffprüfung 2010 CY - Neu-Ulm, Germany DA - 2010-12-02 PY - 2010 AN - OPUS4-22039 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schendler, Thomas A1 - Schröder, Volkmar T1 - Schwer entzündbare Gase - Besonderheiten und Explosionsverhalten T2 - Magdeburger Brand- und Explosionsschutztag, Otto-von-Guericke-Universität CY - Magdeburg, Germany DA - 2010-10-04 PY - 2010 AN - OPUS4-22040 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tikhomirov, D. A1 - Schwenk, Christopher T1 - Effiziente numerische Schweißsimulation durch Standardisierung KW - Schweißen KW - Simulation KW - Normung PY - 2010 SN - 0036-7184 VL - 62 IS - 9 SP - 519 EP - 523 PB - Verl. für Schweißen u. Verwandte Verfahren, DVS-Verl. CY - Düsseldorf AN - OPUS4-22041 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. A1 - Bartholmai, Matthias T1 - Micro-Drone for the Characterization and Self-Optimizing Search of Hazardous Gaseous Substance Sources T2 - International Micro Air Vehicle Conference and Flight Competition (IMAV 2010) CY - Braunschweig, Germany DA - 2010-07-06 PY - 2010 AN - OPUS4-22043 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marchetti, Barbara A1 - von Chrzanowski, Lars A1 - Beckmann, Jörg A1 - Röseler, A. A1 - Schade, U. T1 - THz Spectroscopy to derive the optical constants of liquids N2 - THz stand-off detection of explosives and other hazardous liquids in public areas becomes more and more relevant and with it the knowledge of their optical properties. We present here both the results of THz transmission spectroscopy measurements and spectroscopic ellipsometry measurements on liquids and their mixtures. T2 - IRMMW-THz 2010 - 35th International conference on infrared, millimeter, and terahertz waves CY - Rome, Italy DA - 2010-09-05 KW - THz Spectroscopy KW - Optical constants KW - Liquids PY - 2010 SN - 978-1-4244-6656-6 DO - https://doi.org/10.1109/ICIMW.2010.5612487 SP - 1 EP - 2 AN - OPUS4-22045 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schönhals, Andreas T1 - Structure Property Relationsships of Polymeric Nanocomposites with Layered Nanofillers T2 - 6. International Conference on Broadband Dielectric Spectroscopy and its Applications CY - Madrid, Spain DA - 2010-09-07 PY - 2010 AN - OPUS4-21976 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schönhals, Andreas T1 - Broadband Dielectric Spectroscopy and its Relationship to Other Spectroscopic Techniques T2 - Satelite Courses at 6. International Conference on Broadband Dielectric Spectroscopy and its Applications CY - Madrid, Spain DA - 2010-09-06 PY - 2010 AN - OPUS4-21977 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kisiel, R. A1 - Kozanecki, M. A1 - Schönhals, Andreas A1 - Pastorczak, M. A1 - Koynov, K. A1 - Okrasa, L. A1 - Butt, H. J. A1 - Krysiak, K. A1 - Ulansk, J. T1 - Molecular dynamics in PVME hydrogels at sub-zero temperatures T2 - 6. International Conference on Broadband Dielectric Spectroscopy and its Applications CY - Madrid, Spain DA - 2010-09-07 PY - 2010 AN - OPUS4-21978 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Scherer, Christian A1 - Noskov, S. A1 - Utech, S. A1 - Bantz, C. A1 - Mueller, W. A1 - Krohne, K. A1 - Maskos, M. T1 - Characterization of polymer nanoparticles by asymmetrical flow field flow fractionation (AF-FFF) KW - Nanoparticles KW - Block copolymersm maghemite KW - Core-shell structure KW - Polyorganosiloxane PY - 2010 DO - https://doi.org/10.1166/jnn.2010.2973 SN - 1533-4880 VL - 10 IS - 10 SP - 6834 EP - 6839 PB - American Scientific Publ. CY - Stevenson Ranch, Calif., USA AN - OPUS4-21979 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Ziegert, Christof A1 - Röhlen, U. A1 - Schroeder, H. T1 - Standardization of a sustainable and eco-efficient building material: Earth - a german perspective T2 - CESB '10 - Central Europe Towards Sustainable Building CY - Prague, Czech Republic DA - 2010-06-30 KW - Earthen materials KW - Standardization KW - Sustainability KW - Quality control KW - Normierung KW - Lehmbaustoffe KW - Prüfverfahren KW - Qualitätskontrolle KW - Nachhaltigkeit KW - Stoffkreislauf PY - 2010 SN - 978-80-247-3624-2 SP - 711 EP - 714 PB - Czech Technical University CY - Prague AN - OPUS4-21980 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Correia, N.T. A1 - Bras, A. A1 - Fonseca, I. M. A1 - Affouard, F. A1 - Schönhals, Andreas A1 - Dionisio, M. T1 - Confinement effects in the molecular dynamics of ibuprofen studied by DRS. T2 - 6. International Conference on Broadband Dielectric Spectroscopy and its Applications CY - Madrid, Spain DA - 2010-09-07 PY - 2010 AN - OPUS4-21981 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Krumbein, W.E. A1 - Gorbushina, Anna ED - Timmis, K.N. T1 - Global relations between the Redox cycles of carbon, iron, and sulfur N2 - Solar energy has been transformed into useful redox differences or disequilibria within the Earth´s crust since the onset of anoxygenic and oxygenic photosynthesis in the Precambrian. Inorganic oxidized carbon is transformed into reduced carbon compounds by capturing and storing solar energy. During this process, many different organic compounds are formed including carbohydrates, proteins, hydrocarbons, and various other complex organic metabolic products and their diagenetic polymerization products (melanin, humic substances, petroleum, coal, and kerogen). Many of these solar energy-enriched compounds, however, are oxidized immediately or during the diagenetic transformation of sediments. The oxidation agents are oxygen, sulfate, iron, and other oxidized compounds, which in turn are partly enriched with the original solar energy. On a global biogeochemical scale, however, sulfur and iron are the most important elements. Geological evidence shows that biogeochemical cycles tend to yield stable ratios between the most oxidized forms of carbon (carbon dioxide and calcium/magnesium carbonate) and the most reduced forms (diamond, coal, methane, and hydrocarbons). Throughout the Earth’s history and evolution, this equilibrium ratio is around 1:4, maximally 1:5. When too much carbon is stored in the crust in the form of reduced compounds or vice versa, climatic and biogeomorphogenetic consequences upset the equilibrium. The biosphere reacts in a way to return to the optimal ratio. Excellent examples for this fluctuating equilibrium are the Carboniferous (too much organic carbon stored), the Permian (too little organic carbon stored), and the Tertiary with a generally equivalent production of hydrocarbons and carbonates. At present, we are in a period in which there is a global biogeochemical need to oxidize reduced carbon compounds as fast as possible in order to avoid even more dramatic global climate shifts. The highly evolved human genome seems to be the tool for this shift. Enormous amounts of reduced carbon are turned into the oxidized form as carbon dioxide, which by various biogeochemical pathways is quickly transformed into carbonate, another oxidized form of carbon that can be stabilized and stored in the sedimentary record. Fast recycling of excessively stored solar energy may enable the survival of a global biosphere under highly stressed conditions. KW - Geochemistry KW - Biologically influenced mineral fluxes PY - 2010 SN - 978-3-540-77584-3 SN - 978-3-540-77587-4 DO - https://doi.org/10.1007/978-3-540-77587-4_10 IS - Chapter 10 SP - 157 EP - 169 PB - Springer CY - Berlin Heidelberg AN - OPUS4-21983 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Debreilh, L. A1 - Saiter, A. A1 - Couderc, H. A1 - Arabeche, K. A1 - Dantras, E. A1 - Schönhals, Andreas A1 - Saiter, J.-M. T1 - Temperature dependence of the characteristic length scale for glassy dynamics: Combination of dielectric and specific heat spectroscopy T2 - 6. International Conference on Broadband Dielectric Spectroscopy and its Applications CY - Madrid, Spain DA - 2010-09-07 PY - 2010 AN - OPUS4-21984 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wohlrab, Sebastian A1 - Schönhals, Andreas A1 - Goering, Harald A1 - Friedrich, Jörg Florian T1 - Integration of sol-gel derived inorganic nanonetworks into polymers N2 - Nanoparticulate networks as fillers for polymer based nanocomposites offer an optimized, surfactant free distribution of the inorganic component. Additionally, their non-aggregated but interconnected nanoparticulate subunits can lead to new properties owing to special inherent solid state properties and/or spacial restrictions to the polymeric parts. In particular, polymer nanocomposites based on poly(methyl methacrylate) (PMMA) or poly(hydroxyethyl methacrylate) (PHEMA), filled with different nanoparticulate networks of AlOOH were synthesized using two advanced synthesis techniques. An ex situ method, in which a preformed AlOOH-gel was solvent exchanged by methyl methacrylate (MMA) and an in situ method, in which the AlOOH scaffold was prepared within hydroxyethyl methacrylate (HEMA), have been used to produce the materials described here through polymerization. On the MMA based composites the particles were removed by etching, yielding porous polymers. Promising for a broad variety of crystallisable networks within polymers, the phase transition of amorphous AlOOH within PMMA towards crystalline boehmite was performed using a hydrothermal method. The materials were characterized using transmission electron microscopy, X-ray diffraction, gel permeation chromatography, differential scanning calorimetry, IR-spectroscopy, UV/Vis spectroscopy and hardness measurements. Special material properties were investigated using thermogravimetry, thermomechanical analysis and dynamic mechanical analysis. Furthermore, interactions between PMMA segments and the AlOOH network were detailed studied using dielectric spectroscopy. PY - 2010 DO - https://doi.org/10.1039/c0py00105h SN - 1759-9954 SN - 1759-9962 VL - 1 IS - 8 SP - 1226 EP - 1236 AN - OPUS4-21996 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von der Ehe, Kerstin A1 - Jaunich, Matthias A1 - Böhning, Martin A1 - Goering, Harald A1 - Wolff, Dietmar T1 - Detection of structural changes of (U)HMW-PE induced by gamma irradiation T2 - 14th International conference "Polymeric materials" CY - Halle (Saale), Germany DA - 2010-09-15 PY - 2010 SN - 978-3-86829-282-4 SP - 1 EP - 6 PB - Druck-Zuck GmbH CY - Halle / Saale AN - OPUS4-21997 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Leiterer, Jork A1 - Emmerling, Franziska A1 - radnik, J. A1 - Bentrup, U. A1 - Brückner, A. T1 - Flying droplets as model system for spray drying - An in situ synchrotron X-ray scattering study on complex oxides catalyst precursors N2 - As a model for spray drying the early stages of crystallization of complex molybdate catalyst precursors were monitored online in droplets levitated acoustically. Synchron X-ray scattering techniques were applied to study the drying process of a typical molybdate catalysts precursor prepared from Ni-,Fe-,Bi-nitrate, ammonium heptamolybdate and H3PO4. Comparison with diffraction patterns obtained from sessile droplets shows significant differences in the crystal growth, whereas the final crystal structure – including a Keggin-type anion – is identical in both cases. The levitated samples exhibit a decelerated growth with a large number of small crystallites at the beginning of the crystallization, whereas in case of the sessile droplets a small number of large crystallites were observed after a few minutes. The acoustic levitation using an ultrasonic trap proves to be an elegant tool to mimic spray drying and offers new possibilities in relation to the understanding of the drying process. KW - Acoustic levitation KW - Spray drying KW - Molybdate catalysts KW - X-ray scattering PY - 2010 DO - https://doi.org/10.1016/j.cattod.2009.11.001 SN - 0920-5861 VL - 155 IS - 3-4 SP - 326 EP - 330 PB - Elsevier CY - Amsterdam AN - OPUS4-21998 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schönhals, Andreas A1 - Rittig, F. A1 - Kärger, J. T1 - Self-diffusion of poly(propylene glycol) in nanoporous glasses studied by pulsed field gradient NMR: A study of molecular dynamics and surface interactions N2 - Pulsed field gradient NMR is applied to investigate the self-diffusion of poly(proypylene glycol) in nanoporous glasses (nominal pore sizes of 2.5–7.5 nm). In general, the diffusion is slowed down by the confinement compared to the bulk. For native pore surfaces covered by hydroxyl groups the spin echo attenuation Ψ displays a bimodal behavior versus q2t (q-norm of a generalized scattering vector). This was explained assuming spatial regions of different diffusivities in a two-phase model. The slow component is assigned to segments forming a surface layer close to the pore walls in which the segments have a lower mobility than those located in the center of the pores. By variation of observation time it was concluded that time constant for the dynamic exchange of segments between these two regions is around 100 ms at room temperature. For silanized pores, the bimodal behavior in the spin echo attenuation Ψ shows a stretched exponential decay versus q2t. The estimated diffusion coefficients decrease strongly with decreasing pore size. The temperature dependence of the diffusion coefficient can be approximated by an Arrhenius law where the activation energy increases with decreasing pore size. The observed pore size dependence for the diffusion of poly(propylene glycol) in silanized nanoporous glasses can be discussed assuming interaction and confining size effects. KW - Glass KW - Molecular dynamics method KW - Nanoporous materials KW - Polymers KW - Self-diffusion KW - Spin echo (NMR) PY - 2010 DO - https://doi.org/10.1063/1.3479905 SN - 0021-9606 SN - 1089-7690 VL - 133 IS - 9 SP - 094903-1 - 094903-7 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-22000 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sabel, Martin A1 - Feldmann, Ines A1 - Raedel, Martina A1 - Torge, Manfred A1 - Unger, Brita A1 - Bücker, Michael T1 - SEM-EDX: A universal tool in restoration T2 - SEM 2010 CY - London, England DA - 2010-09-09 PY - 2010 AN - OPUS4-22001 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dreßler, Martin A1 - Röllig, Mathias A1 - Schmidt, Martin A1 - Maturilli, A. A1 - Helbert, J. T1 - Temperature distribution in powder beds during 3D printing N2 - Purpose – This purpose of this paper is to report about the temperature distribution in metal and ceramic powder beds during 3D printing. The differing powders are thoroughly characterized in terms of thermal conductivity, thermal diffusivity, emissivity spectra and density. Design/methodology/approach – The temperature distribution was measured in a 3D printing appliance (Prometal R1) with the help of thin thermocouples (0.25 mm diameter) and thermographic imaging. Temperatures at the powder bed surface as well as at differing powder bed depths were determined. The thermal conductivity, thermal diffusivity and emissivity spectra of the powders were measured as well. Numerical simulation was used to verify the measured temperatures. Findings – The ceramic powder heated up and cooled down more quickly. This finding corresponds well with numerical simulations based on measured values for thermal conductivity and thermal diffusivity as well as emissivity spectra. An observed color change at the metal powder has only little effect on emissivity in the relevant wavelength region. Research limitations/implications – It was found that thermocouple-based temperature measurements at the powder bed surface are difficult and these results should be considered with caution. Practical implications – The results give practitioners valuable information about the transient temperature evolution for two widely used but differing powder systems (metal, ceramic). The paramount importance of powder bed porosity for thermal conductivity was verified. Already small differences in thermal conductivity, thermal diffusivity and hence volumetric heat capacity lead to marked differences in the transient temperature evolution. Originality/value – The paper combines several techniques such as temperature measurements, spectral emissivity measurements, measurements of thermal conductivity and diffusivity and density measurements. The obtained results are put into a numerical model to check the obtained temperature data and the other measured values for consistency. This approach illustrates that determinations of surface temperatures of the powder beds are difficult. KW - Rapid prototypes KW - Printers KW - Heat transfer KW - Powders KW - Ceramics KW - Metals PY - 2010 DO - https://doi.org/10.1108/13552541011065722 SN - 1355-2546 VL - 16 IS - 5 SP - 328 EP - 336 PB - MCB University Press CY - Bradford AN - OPUS4-22002 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlüter, Vivien A1 - Kusche, Nadine A1 - Habel, Wolfgang ED - Santos, J.L. ED - Culshaw, B. ED - López-Higuera, J.M. ED - MacPherson, W.N. T1 - How reliable do fibre Bragg grating patches perform as strain sensors? T2 - 4th European workshop on optical fibre sensors CY - Porto, Portugal DA - 2010-09-08 KW - Fibre Bragg grating KW - Patch KW - Stain gauge KW - Strain transfer characterization KW - Temperature sensitivity PY - 2010 SN - 978-0-8194-8083-5 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 7653 SP - 76533N-1 - 76533N-4 PB - SPIE, the International Society for Optical Engineering CY - Bellingham, Wash. AN - OPUS4-22003 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Adam, Christian A1 - Brenneis, Rudolf A1 - Adamczyk, Burkart T1 - Möglichkeiten der thermochemischen Behandlung von Reststoffen KW - Thermochemische Stofftrennung KW - Wertstoffrückgewinnung PY - 2010 DO - https://doi.org/10.1002/cite.201050012 SN - 0009-286X SN - 1522-2640 VL - 82 IS - 9 SP - 1579 EP - 1580 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-22004 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weißhaupt, Petra A1 - Pritzkow, Wolfgang A1 - Noll, Matthias T1 - Tracking nitrogen metabolism of wood decaying basidiomycetes by EA-IRMS T2 - 9. Symposium Massenspektrometrische Verfahren der Elementspurenanalyse zusammen mit dem 22. ICPMS-Anwendertreffen, BAM CY - Berlin, Germany DA - 2010-09-06 PY - 2010 AN - OPUS4-22006 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weißhaupt, Petra A1 - Pritzkow, Wolfgang A1 - Noll, Matthias T1 - Exploring the nitrogen uptake of Trametes versicolor and Oligoporus placenta by EA-IRMS and stable isotope Iabelling T2 - Symposium Biotransformation by Fungal Cells or Fungal Enzymes CY - Senftenberg, Germany DA - 2010-09-30 PY - 2010 AN - OPUS4-22007 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunewald, Thomas T1 - Zündwahrscheinlichkeiten mechanisch erzeugter Funken mit Bezug zur EN 13463-1 T2 - 4. Essener Explosionsschutztage CY - Essen, Germany DA - 2010-09-29 PY - 2010 AN - OPUS4-22010 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Straub, Franka A1 - Wirth, Thomas A1 - Unger, Wolfgang T1 - TOF-SIMS mapping of stainless steel microstructures T2 - SIMS EUROPE 2010 - 7th European Workshop on Secondary Ion Mass Spectrometry CY - Münster, Germany DA - 2010-09-19 PY - 2010 AN - OPUS4-22011 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Noll, Matthias A1 - Naumann, Annette A1 - Ferrero, Fabio A1 - Malow, Marcus T1 - Exothermic processes in industrial-scale piles of chipped pine-wood are linked to shifts in gamma-, alphaproteobacterial and fungal ascomycete communities N2 - Fast growing softwood species such as pine are preferred for biomass-based heat as well as electricity production and stored in large quantities. A newly established outdoor pile of freshly cut pine-wood chips was monitored to analyze exothermic processes. Inside the pile, a mean temperature increase of up to 44 °C was measured after six days of piling which was paralleled by a decrease of O2-concentration and an increase of CO2-concentration. Thereafter four additional CO2 maxima were observed, while O2-concentration remained at ambient concentration. The fungal community structure remained almost unchanged after four weeks, while the bacterial community structure was characterized by continuous shifts over time. The rapid heating in the early stage of storage corresponded to high relative abundance of microbial strains belonging to the genera Pseudomonas, Luteibacter and Caulobacter, ascomycetous genera Sphaeropsis and Cadophora and basidiomycetous order Polyporales and genus Sistotremastrum. The late stage was composed by a broader diversity of microorganisms, and heating processes inside the wood pile were attributed mainly to physicochemical processes. Taken together, these observations suggest that the early bacterial and fungal communities are key players in exothermic processes and were replaced by a broader diversity of highly adapted microorganisms. KW - 16S rRNA gene KW - Bacteria KW - Fungi KW - Pine-wood storage KW - T-RFLP KW - Self-heating KW - Succession KW - ITS PY - 2010 DO - https://doi.org/10.1016/j.ibiod.2010.07.002 SN - 0964-8305 VL - 64 IS - 7 SP - 629 EP - 637 PB - Elsevier CY - Barking AN - OPUS4-22013 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Auersch, Lutz T1 - Building response due to ground vibration - simple prediction model based on experience with detailed models and measurements N2 - Construction work, such as pile driving and soil compaction, or road and railway traffic excite nearby buildings, and the perceptible or audible vibration can be a nuisance for nearby inhabitants. A simplified building model has been created for these situations, which includes the effects of soil-structure interaction, the low-frequency amplification along the height of the building as well as the high-frequency reduction and the floor resonances. The model consists of one wall for all supporting structures (walls and columns) and one floor for each storey. The effect of different floor resonance frequencies is included in a stochastic procedure. The soil is modelled by a spring and a viscous damper, and the free-field amplitudes of the soil are applied under this soil element. The model can be calculated by transfer matrices or in a continuous wave-type version where an analytical solution can be evaluated numerically. The building response in the high-frequency (acoustic) region is calculated as mean values over wider frequency bands. The approach to an infinite building model can be found for these high frequencies and the corresponding soil-structure transfer can be described by the ratio of impedances at foundation level. The rules for choosing the parameters to obtain realistic results are derived from complex calculations for example, for the stiffness and damping of building foundations and many measurements as for the damping of floor resonances. The influences on the floor resonance from the soil (damping) and the supporting structure (detuning) are important. Some more effects will be discussed by the simplified and detailed models and by measurements to establish a good understanding of ground-induced building vibrations. PY - 2010 SN - 1027-5851 VL - 15 IS - 3 SP - 101 EP - 112 CY - St. Petersburg, Russia AN - OPUS4-22014 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Theiler, Geraldine A1 - Gradt, Thomas T1 - Friction and wear of PEEK composites in vacuum environment N2 - The sliding performance of PEEK composites was investigated in vacuum environment. Tests were performed with carbon fibre reinforced PEEK composites filled with PTFE, and MoS2 or graphite as further solid lubricant. Polymer samples were tested in a pin-on-disc configuration continuously sliding against CrNi-steel. Depending on sliding speed and temperature, the MoS2 filled composites showed high wear resistance and friction coefficients as low as PVD coatings. KW - PEEK composites KW - Vacuum KW - Friction KW - Wear KW - MoS2 KW - Graphite PY - 2010 DO - https://doi.org/10.1016/j.wear.2010.04.007 SN - 0043-1648 VL - 269 IS - 3-4 SP - 278 EP - 284 PB - Elsevier CY - Amsterdam AN - OPUS4-22046 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Theiler, Geraldine A1 - Gradt, Thomas T1 - MoS2-filled PEEK composite as a self-lubricating material for aerospace applications T2 - 40th Aerospace mechanisms symposium CY - Cocoa Beach, FL, USA DA - 2010-05-12 KW - PEEK composite KW - MoS2 KW - Friction KW - Ultra high vacuum KW - Aerospace PY - 2010 IS - NASA/CP-2010-216272 SP - 347 EP - 351 CY - Hanover, MD, USA AN - OPUS4-22047 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlüter, Vivien T1 - Flugzeuge mit Nerven aus Glas T2 - Wissenschaftsmeile Berlin Süd-West bei der Firma Wüstefeld in der Schloßstraße CY - Berlin, Germany DA - 2010-05-16 PY - 2010 AN - OPUS4-22048 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Krebber, Katerina T1 - A novel technique for quasi-distributed and dynamic length change measurement in optical fibers T2 - OSA Optics and Photonics Congress CY - Karlsruhe, Germany DA - 2010-06-21 PY - 2010 AN - OPUS4-22049 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günther, Alexander A1 - Muschik, Bernd A1 - Gründer, Klaus-Peter T1 - Bi-spektrale Messung der Reflexionseigenschaften von fluoreszierenden Materialien N2 - Beim bispektralen Verfahrensprinzip (auch 2-Monochromatoren-Methode genannt) zur Charakterisierung fluoreszierender Reflexionsproben wird das Probenmaterial monochromatisch bestrahlt und für jede dieser anregenden Wellenlängen das emittierte Spektrum monochromatisch gemessen. Dies hat gegenüber einer polychromatischen Anregung (z. B. Normlichtart D65) den Vorteil, dass spektrale Materialfunktionen (Gesamt-, Reflexions- und Lumineszenz-Strahldichtefaktoren sowie das Lumineszenz-Anregungsspektrum) und diverse Farbmaßzahlen (Sicherheits- und Kontrastfarben; Referenzmaterial) für beliebige Anregungsspektren (Normlichtarten) bestimmt werden können. T2 - Licht 2010 (Gemeinschaftstagung der deutschen, niederländischen, schweizerischen und österreichischen lichttechnischen Verbände) CY - Vienna, Austria DA - 17.10.2010 PY - 2010 AN - OPUS4-22050 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. A1 - Wiggerich, B. A1 - Bartholmai, Matthias T1 - Micro-drone for the characterization and self-optimizing search of hazardous gaseous substance sources T2 - IMAV 2010 - International micro air vehicle conference and flight competition CY - Braunschweig, Germany DA - 2010-07-06 KW - Mikrodrohne KW - Quadrokopter KW - Robotik KW - Suche und Lokalisierung von gasförmigen Gefahrstoffquellen PY - 2010 SP - 1 EP - 5 AN - OPUS4-22051 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günther, Alexander A1 - Muschik, Bernd A1 - Gründer, Klaus-Peter T1 - Bi-spektrale Messung der Reflexionseigenschaften von fluoreszierenden Materialien T2 - Licht 2010 (Gemeinschaftstagung der deutschen, niederländischen, schweizerischen und österreichischen lichttechnischen Verbände) CY - Vienna, Austria DA - 2010-10-17 PY - 2010 AN - OPUS4-22052 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Krebber, Katerina T1 - A novel fiber optic technique for quasi-distributed and dynamic measurement of length change and refractive index T2 - 4th European Workshop on Optical Fibre Sensors CY - Oporto, Portugal DA - 2010-09-08 PY - 2010 AN - OPUS4-22053 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Witt, Jens A1 - Steffen, Milan A1 - Schukar, Marcus A1 - Krebber, Katerina T1 - Investigation of sensing properties of long period gratings based on microstructured polymer optical fibres T2 - 4th European Workshop on Optical Fibre Sensors CY - Oporto, Portugal DA - 2010-10-08 PY - 2010 AN - OPUS4-22054 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Krüger, Oliver A1 - Christoph, Gabriele T1 - New aspects of the determination of PAH leaching behaviour from contaminated soils T2 - ConSoil 2010 - 11th International UFZ- Deltares/TNO Conference on Management of Soil, Groundwater and Sediment CY - Salzburg, Austria DA - 2010-09-22 KW - Contaminated soil KW - PAH KW - Leaching tests PY - 2010 SN - 978-3-00-032099-6 IS - Posters_A/A2/Berger_etal.pdf SP - 1 EP - 5 AN - OPUS4-22055 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krahl, Thoralf A1 - Scholz, G. A1 - Peplinski, Burkhard A1 - Adamczyk, Burkart A1 - Adam, Christian A1 - Jäger, Christian A1 - Kemnitz, E. T1 - Multinuclear NMR investigation of the tridymite form of doped AIPO4 T2 - 32. Discussion Meeting & Joint Benelux/German Magnetic Resonance Conference, organized by the GDCh, Division of Magnetic Resonance Spectroscopy CY - Münster, Germany DA - 2010-09-20 PY - 2010 AN - OPUS4-21966 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Röhrich, J. A1 - Reinholz, Uwe A1 - Denker, A. A1 - Bohne, W. A1 - Müller, U. A1 - Damerow, T. A1 - Hahn, W. T1 - Status of the injectors for the proton therapy at the HZB T2 - 44. Symposium of North Eastern Accelerator Personal SNEAP CY - Paris, France DA - 2010-09-20 PY - 2010 AN - OPUS4-21967 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Bürgisser, Philip A1 - Weise, Frank A1 - Meng, Birgit ED - Castro-Borges, P. ED - Moreno, E.I. ED - Sakai, K. ED - Gjorv, O.E. ED - Banthia, N. T1 - The natural pozzolana 'Rhenish trass' and its effect on ASR in concrete T2 - CONSEC’10 - 6th International conference on concrete under severe conditions - Environment and loading CY - Mérida, Yucatán, México DA - 2010-06-07 KW - AKR KW - Beton KW - Natürliche Pozzolane PY - 2010 SN - 978-0-415-59316-8 SP - 313 EP - 320 PB - Taylor & Francis AN - OPUS4-21969 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fontana, Patrick A1 - Lehmann, Christian A1 - Müller, Urs A1 - Meng, Birgit ED - Brameshuber, W. T1 - Reactivity of mineral additions in autoclaved UHPC T2 - International Conference on Material Science and 64th RILEM Annual week CY - Aachen, Germany DA - 2010-09-06 KW - UHPC KW - Autoklavierung KW - Mikrostruktur KW - Festigkeit KW - Phasenzusammensetzung KW - Forschung und Entwicklung PY - 2010 SN - 978-2-35158-110-0 VL - III IS - PRO 77 SP - 69 EP - 77 PB - RILEM Publications AN - OPUS4-21970 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfister, Sabine A1 - Vela-Wallenschus, Iris A1 - Knaust, Christian A1 - Krause, Ulrich T1 - Untersuchung von Brandszenarien in Industrieanlagen mit numerischer Strömungssimulation T2 - 12. Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Deutschland DA - 2010-06-15 KW - Industriebrände KW - CFD Simulation KW - Brandsimulation PY - 2010 SN - 978-3-9813550-1-7 SN - 0938-5533 N1 - Geburtsname von Vela-Wallenschus, Iris: Vela, I. - Birth name of Vela-Wallenschus, Iris: Vela, I. SP - 55 EP - 59 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-21972 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schröder, Volkmar T1 - Sicherheitstechnische Aspekte der CCS-Technologie N2 - In der europäischen Richtlinie 2009/31/EG über die geologische Speicherung von Kohlendioxid wird das CCS-Verfahren (carbon dioxide capture and geological storage) als eine Brückentechnologie bezeichnet, die zur Abschwächung des Klimawandels beiträgt. Sowohl bei den Techniken zur Abscheidung des CO2 im Kraftwerk, als auch beim Transport und bei der geologischen Speicherung sind sicherheitstechnische Fragen zu beachten, um das Risiko einer Freisetzung großer Mengen an CO2 zu minimieren. Dabei ist, neben den neu entwickelten Technologien, der Umgang mit sehr großen Mengen von Verbrennungsabgasen und Kohlendioxid zu bewerten. KW - Sicherheitstechnik KW - Kraftwerkstechnologien KW - Klimawandel KW - Kohlendioxidemission KW - CCS PY - 2010 SN - 1434-9728 SN - 1436-4948 SN - 0372-2457 SN - 0376-1185 VL - 51 IS - 9 SP - 10 EP - 14 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-21973 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Niebergall, Ute T1 - Comparison of the stress crack resistance of polyethylene grades with the test performance behaviour of packagings for the transport of dangerous goods N2 - Resistance to stress cracking by wetting solution is one of the selected properties together with the corresponding test method FNCT and tolerances for a comparison of polyethylene grades of one design type in the procedural rule on suitability proof for alternative plastic resins used for packagings and intermediate bulk containers (IBCs) for the transport of dangerous goods. The environmental stress crack resistance determined by Full Notch Creep Test (FNCT) represents the impacts from the stacking tests at 40 °C performed with standard liquid wetting solution (without pre-storage) and with normal butyl acetate saturated wetting solution (pre-storage with normal butyl acetate). Environmental stress crack resistance determined with FNCT for the polyethylene grades was related to the times to failure of different jerrican samples made of these grades in stacking tests with 5% wetting solution and a n-butyl acetate saturated wetting solution (pre-storage with n-butyl acetate) at 40 °C. The FNCT is suitable for comparison of polyethylene grades in relation to environmental stress crack resistance independent of their use as drum, IBC or jerrican material. The stiffness of polyethylene grades should be taken into account to the comparison as jerricans are not only chemically but also mechanically stressed. T2 - EUROCORR 2010 CY - Moscow, Russia DA - 2010-09-13 KW - Polyethylenformstoffe KW - Gefahrgutverpackungen KW - Spannungsrissbeständigkeit KW - Stapeldruckprüfungen PY - 2010 N1 - Serientitel: EFC-Event – Series title: EFC-Event IS - 324 SP - 1 EP - 6 PB - DECHEMA CY - Moscow AN - OPUS4-21974 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Plarre, Rüdiger T1 - Pheromone im Vorrats- und Materialschutz - Erfahrungen aus über 35 Jahren praktischen Einsatzes T2 - Deutsche Planzenschutztagung 6. bis 9. September 2010 CY - Berlin, Germany DA - 2010-09-06 PY - 2010 AN - OPUS4-21975 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lenke, Philipp A1 - Krebber, Katerina T1 - Verteilte faseroptische Sensorik - physikalische Grundlagen und Anwendungen T2 - VDI/VDE-Expertenforum "Verteilte Messsysteme 2010" CY - Braunschweig, Germany DA - 2010-03-24 PY - 2010 AN - OPUS4-22017 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. A1 - Bartholmai, Matthias T1 - Mikrodrohne zur Gasmessung in Gefahrenszenarien T2 - Sensor + Test 2010 CY - Nuremberg, Germany DA - 2010-05-18 PY - 2010 AN - OPUS4-22018 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. A1 - Bartholmai, Matthias T1 - Micro-drone for the characterization and self-optimizing search of hazardous gaseous substance sources T2 - Artificial Olfaction Seminar CY - Örebro, Sweden DA - 2010-05-25 PY - 2010 AN - OPUS4-22019 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. A1 - Bartholmai, Matthias T1 - Micro-drone for the characterization and self-optimizing search of hazardous gaseous substance sources T2 - 15.ITG-/GMA-Fachtagung "Sensoren und Messsysteme 2010" CY - Nuremberg, Germany DA - 2010-05-18 PY - 2010 AN - OPUS4-22020 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bartholmai, Matthias A1 - Werner, Klaus-Dieter A1 - Kammermeier, Michael T1 - Temperaturabhängige Prüfung von Beschleunigungsaufnehmern für stoßartige Beanspruchungen N2 - Motivation: - Beschleunigungsaufnehmer (BA) sind in ihrer Funktion und in ihren Messeigenschaften stark temperaturabhängig - kritisch ist z. B. der Dämpfungsmechanismus der seismischen Masse piezoelektrischer BA - Anwendung: z. B. Fallversuche mit spezifischer Temperaturvorgabe (- 40 °C, + 100 °C) - Entwicklung eines geeigneten Prüfverfahrens zur temperaturabhängigen Untersuchung von BA T2 - 15. ITG-/GMA-Fachtagung "Sensoren und Messsysteme 2010"/Messe "Sensor + Test 2010" CY - Nuremberg, Germany DA - 18.05.2010 PY - 2010 AN - OPUS4-22021 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Buchholz, Uwe A1 - Petersson, B.A.T. T1 - Computation of the surface velocity of a cylindrical layered dielectric device caused by partial discharges T2 - DAGA 2010, 36. Jahrestagung für Akustik CY - Berlin, Germany DA - 2010-03-15 PY - 2010 AN - OPUS4-22022 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Nöther, Nils A1 - Wosniok, Aleksander A1 - Schneider-Gloetzl, J. A1 - Gloetzl, R. T1 - Distributed fibre optic sensors embedded in technical textiles for monitoring of geotechnical and masonry structures T2 - European Workshop on Monitoring Technologies (MoDeRn) - Potential Application to Monitoring of Geological Repositories for Radioactive Waste CY - Troyes, France DA - 2010-06-07 PY - 2010 AN - OPUS4-22023 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Subaric-Leitis, Andreas A1 - Schwenk, D. T1 - Characteristic Quality Parameters of Measurement - Verification and Calibration of Material Testing Machines T2 - IMEKO 2010 TC3, TC5 and TC22 Conferences "Metrology in Modern Context" CY - Pattaya, Thailand DA - 2010-11-22 PY - 2010 AN - OPUS4-22024 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hübert, Thomas A1 - Lang, Cindy T1 - "Künstliche Früchte" - Online-Monitoring des Feuchtigkeitsverlustes bei pflanzlichen Frischeprodukten T2 - AQUAMETRY 2010 & Feuchtetag 2010 CY - Weimar, Germany DA - 2010-10-05 PY - 2010 AN - OPUS4-22027 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Knabe, C. A1 - Berger, Georg A1 - Gildenhaar, Renate A1 - Ducheyne, P. A1 - Stiller, M. T1 - Novel, rapidly resorbable bioceramic bone grafts produce a major osteogenic effect - the pre-clinical evidence KW - Calcium phosphates KW - Bone substitute materials KW - Bioactive ceramics KW - Biodegradability PY - 2010 DO - https://doi.org/10.4028/www.scientific.net/AST.76.214 SN - 1662-0356 VL - 76 SP - 214 EP - 223 PB - Techna CY - Faenza AN - OPUS4-22028 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heinze, Christoph A1 - Schwenk, Christopher T1 - Optimierung von Verzug und Eigenspannungen beim Schweißen dickwandiger Bauteile T2 - FOSTA-Veranstaltung für Industrievertreter, Präsentation von aktuellen Forschungsergebnissen, BAM CY - Berlin, Germany DA - 2010-09-23 PY - 2010 AN - OPUS4-22029 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vattré, A. A1 - Fedelich, Bernard A1 - Roos, A A1 - Devincre, B. T1 - Strength of single crystal superalloys: from dislocation dynamics simulations to continuum micromechanics T2 - 5th International Conference on Multiscale Materials Modeling (MMM2010) CY - Freiburg, Germany DA - 2010-10-04 PY - 2010 AN - OPUS4-22030 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Daum, Werner A1 - Bartholmai, Matthias A1 - Goedecke, Thomas T1 - Sensor Technologies for Packages, Storage, and Geological Disposal of Radioactive Waste T2 - ANDRA Workshop on Monitoring Technologies - Potential Application to Monitoring of Geological Repositories for Radioactive Waste CY - Troyes, France DA - 2010-06-07 PY - 2010 AN - OPUS4-22031 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nöther, Nils A1 - Krebber, Katerina A1 - Döring, H. A1 - Grosswig, S. T1 - Monitoring of a coastal slope: A comparison of integral and distributed strain and temperature measurements with optical fiber sensors T2 - European Workshop on Structural Health Monitoring CY - Sorrento, Italy DA - 2010-06-28 PY - 2010 AN - OPUS4-22032 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ehrig, Karsten A1 - Staude, Andreas A1 - Goebbels, Jürgen A1 - Bartscher, M. A1 - Koch, M. A1 - Neukamm, M. ED - Kastner, J. T1 - Evaluierung von Testkörpern zur Strahlaufhärtungskorrektur beim dimensionellen Messen mit Computertomographie T2 - Industrielle Computertomografie Tagung CY - Wels, Österreich DA - 2010-09-27 KW - Testkörper KW - Strahlaufhärtung KW - CT KW - Dimensionelles Messen PY - 2010 SN - 978-3-8322-9418-2 SN - 1610-4773 SP - 181 EP - 186 PB - Shaker Verlag GmbH AN - OPUS4-22033 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Feldmann, Ines A1 - Torge, Manfred A1 - Krug, Sonja A1 - Bücker, Michael T1 - Schadensphänomene an Quecksilberspiegeln KW - Quecksilberspiegel KW - Zinnamalgam KW - Schäden PY - 2010 SN - 0947-6229 IS - 3 SP - 265 EP - 267 PB - Dt. Bergbau-Museum CY - Bochum AN - OPUS4-22034 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mix, Renate A1 - Friedrich, Jörg F. T1 - Polymer surface modification by dielectric barrier discharge in presence of aerosols T2 - Plasmadays 2010 CY - Luxembourg City, Luxembourg DA - 2010-07-05 PY - 2010 AN - OPUS4-21986 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Min, Hyegeun A1 - Wettmarshausen, Sascha A1 - Friedrich, Jörg F. A1 - Unger, Wolfgang T1 - A ToF-SIMS Study of the Deuterium-Hydrogen Exchange Induced by Ammonia Plasma Treatment of Simple Polyolefines T2 - SIMS Europe 2010 - 7th European Workshop on Secondary Ion Mass Spectrometry CY - Münster, Germany DA - 2010-09-19 PY - 2010 AN - OPUS4-21987 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Richter, Silke T1 - Anwendung von Feststoffprobetechniken als Alternative zur Flüssiganalytik: Möglichkeiten und Grenzen T2 - Hochschule Lausitz (FH), Fachbereichskolloquium CY - Senftenberg, Germany DA - 2010-06-10 PY - 2010 AN - OPUS4-21989 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jakubowski, Norbert A1 - Müller, Larissa A1 - Roos, P. H. T1 - ICP-MS eine neue Methode für die Bioanalytik? T2 - Johannes Gutenberg-Universität Mainz, GRK-Seminar "Elementspeziation" CY - Mainz, Germany DA - 2010-06-15 PY - 2010 N1 - Geburtsname von Müller, Larissa: Wäntig, L. - Birth name of Müller, Larissa: Wäntig, L. AN - OPUS4-21990 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dette, Angelika A1 - Richter, Silke A1 - Heinrich, Hans-Joachim A1 - Recknagel, Sebastian A1 - Jakubowski, Norbert T1 - Bestimmung von Spurenverunreinigungen und deren Bindungsformen in hochreinem SiC T2 - ICP-OES Anwendertreffen, Thermo Scientific CY - Hanover, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-21992 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bonse, Jörn A1 - Höhm, S. A1 - Rosenfeld, A. A1 - Krüger, Jörg T1 - Femtosecond laser-induced periodic surface structures in semiconductors: recent approaches to explain their sub-wavelength periodicities T2 - Summer School 2010 des DFG Schwerpunktprogramms 1327 "Optisch erzeugte Sub-100 nm-Strukturen für biomedizinische und technische Anwendungen" CY - Hanover, Germany DA - 2010-09-20 PY - 2010 AN - OPUS4-21993 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlüter, Vivien T1 - Strukturintegrierte Sensorik in Flugzeugen T2 - Hannover Industrie-Messe CY - Hanover, Germany DA - 2010-04-19 PY - 2010 AN - OPUS4-21994 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bartholmai, Matthias A1 - Köppe, Enrico T1 - Funksensornetzwerk zur Strukturüberwachung und Schadensfrüherkennung an Bauwerken T2 - VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA): Expertenforum "Verteilte Messsysteme 2010" CY - Braunschweig, Germany DA - 2010-03-24 PY - 2010 AN - OPUS4-21995 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Quercetti, Thomas A1 - Musolff, André A1 - Müller, Karsten A1 - Droste, Bernhard A1 - Nakagami, M. A1 - Komatsuki, S. A1 - Fujisawa, K. A1 - Nishio, T. T1 - Waste container drop tests onto a concrete target. T2 - PATRAM 2010, 16th International Symposium on the Packaging and Transport of Radioactive Materials CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-22938 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Karsten T1 - Neues von experimentellen Behälteruntersuchungen im Fallprüfstand auf dem BAM TTS Testgelände Technische Sicherheit T2 - 2. RAM Behältersicherheitstage 2010, BAM CY - Berlin, Germany DA - 2010-03-18 PY - 2010 AN - OPUS4-22939 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Recknagel, Christoph T1 - Strukturanalyse von offenporigen Asphalten KW - Moderne Fahrbahnbeläge KW - Strukturaufklärung KW - Phasendifferenzierung KW - Bildgebende Auswertung KW - Modellierung KW - Asphaltforschung PY - 2010 IS - Kap. 4.3 SP - 226 EP - 258 AN - OPUS4-22940 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Helmerich, Rosemarie T1 - Brücken aus der Preußisch-Königlichen Hütte Malapane in Malapane KW - Brücken KW - Gusseisen KW - Rezension KW - Historische Hütte KW - Älteste gusseiserne Brücken PY - 2010 DO - https://doi.org/10.1002/stab.201002191 SN - 0038-9145 SN - 1437-1049 SN - 0932-6375 VL - 79 IS - 12 SP - 943 EP - 946 PB - Ernst CY - Berlin AN - OPUS4-22941 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lehnik-Habrink, Petra A1 - Hein, Sebastian A1 - Win, Tin A1 - Bremser, Wolfram A1 - Nehls, Irene T1 - Multi-residue analysis of PAH, PCB, and OCP optimized for organic matter of forest soil KW - DDT breakdown KW - Extraction efficiency KW - Forest soil KW - Multi-residue analysis KW - Organic pollutants KW - Soil organic matter PY - 2010 DO - https://doi.org/10.1007/s11368-010-0241-3 SN - 1439-0108 VL - 10 IS - 8 SP - 1487 EP - 1498 PB - Springer CY - Berlin; Heidelberg AN - OPUS4-22945 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, A. A1 - Weimann, Karin T1 - Leistungsfähigkeit der Setztechnik KW - Aufbereitungstechnik KW - Setztechnik KW - Baustoffe KW - Recycling KW - Beton KW - Gips PY - 2010 SN - 0934-683X SN - 0178-1510 VL - 26 IS - 2 SP - 20 EP - 27 PB - Giesel-Verl. CY - Isernhagen AN - OPUS4-22946 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Drame, Christian T1 - Ausbreitung von Deflagrationen in geschlossenen langen Rohrleitungen KW - Explosionsschutz KW - Deflagration KW - Rohrleitungen PY - 2010 SP - 1 EP - 114 AN - OPUS4-22877 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Eichler, Thorsten A1 - Isecke, Bernd A1 - Faulhaber, Armin ED - Gieler-Breßmer, S. T1 - Die sekundären Schutzmechanismen des kathodischen Korrosionsschutz von Stahl in Beton und ihre Bedeutung für die Praxis T2 - 8. Symposium "Kathodischer Korrosionsschutz von Stahlbetonbauwerken" CY - Ostfildern, Deutschland DA - 2010-11-18 KW - Chloridmigration KW - pH-Wertänderung KW - Repassivierung KW - Kathodischer Korrsoionsschutz KW - Stahlbeton PY - 2010 SN - 3-924813-88-4 SP - 3 EP - 7 AN - OPUS4-22878 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beckmann, Jörg A1 - Schmidt, Richard A1 - Ewert, Uwe A1 - Berndt, A. A1 - Strebl, F. T1 - Agenda 2020 for a European Certification System for CBRNE Sensor Systems and Devices - the Concept for a Road Map N2 - Developments for technologies were initiated by the European Commission to improve future response capabilities and strategies to prevent terrorist attacks, to reduce the vulnerability to terrorism and to minimize the extent of damage from terrorist attacks. CBRN civil protection faces a growing significance in this concept and modern detectors and detection systems play the key role for a future reliable functioning that counters terrorism in Europe. The European Union is supporting the project CREATIF which is dedicated to provide a communication platform for technology users and decision makers, providers, and testers. First ideas were designed, strategies developed, preconditions and rules were named for a future internationally recognized certification system. A concept for a future European Certification System for CBRNE Sensor Systems and Devices and Processes has been developed, which is described in more detail. T2 - 1st International symposium on development of CBRN defence capabilities CY - Berlin, Germany DA - 2010-11-30 KW - WMD KW - CBRNE KW - Certification KW - Testing PY - 2010 SN - 978-3-935938-75-4 IS - P10.5 SP - 1603 EP - 1606 CY - Bonn AN - OPUS4-22879 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Schors, Jörg A1 - Hentschel, Manfred P. T1 - Werkstoffcharakterisierung mittels Röntgen-Refraktions- und Röntgen-Weitwinkel-Topographie T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-22883 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Kupsch, Andreas A1 - Harwardt, Michael A1 - Hentschel, Manfred P. T1 - Characterization of micro structured lightweight materials by X-Ray Refraction and X-Ray Diffraction Topography T2 - Far East NDT Forum CY - Kunshan, China DA - 2010-05-25 PY - 2010 AN - OPUS4-22884 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hentschel, Manfred P. A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Manke, I. A1 - Kardjilov, N. A1 - Grothausmann, R. A1 - Hilger, A. A1 - Banhart, J. A1 - Schäfer, R. A1 - Strobl, M. A1 - Dawson, M. A1 - Grünzweig, C. A1 - David, C. A1 - Behr, G. T1 - Three-dimensional imaging of magnetic domains T2 - 2nd HZB Joint User's Meeting CY - Berlin, Germany DA - 2010-12-09 PY - 2010 AN - OPUS4-22885 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller-Mai, C.M. A1 - Berger, Georg A1 - Stiller, M. A1 - Gildenhaar, Renate A1 - Jörn, Daniela A1 - Ploska, Ute A1 - Houshmand, A. A1 - Bednarek, A. A1 - Koch, C. A1 - Knabe, C. T1 - Evaluation of degradable bone cements for percutaneous augmentation of bone defects KW - Bone defect KW - Bioactive bone cement KW - Calcium alkali orthophosphates KW - Histology KW - Histomorphometry KW - Knochendefekt KW - Bioaktiver Knochenzement KW - Calciumalkaliorthophosphat KW - Histologie KW - Histomorphometrie PY - 2010 DO - https://doi.org/10.1002/mawe.201000706 SN - 0933-5137 SN - 1521-4052 VL - 41 IS - 12 SP - 1040 EP - 1047 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-22891 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Boon-Brett, L. A1 - Bousek, J. A1 - Black, G. A1 - Moretto, P. A1 - Castello, P. A1 - Hübert, Thomas A1 - Banach, Ulrich T1 - Identifiying performance gaps in hydrogen safety sensor technology for automotive and stationary applications N2 - A market survey has been performed of commercially available hydrogen safety sensors, resulting in a total sample size of 53 sensors from 21 manufacturers. The technical specifications, as provided by the manufacturer, have been collated and are displayed herein as a function of sensor working principle. These specifications comprise measuring range, response and recovery times, ambient temperature, pressure and relative humidity, power consumption and lifetime. These are then compared against known performance targets for both automotive and stationary applications in order to establish in how far current technology satisfies current requirements of sensor end users. Gaps in the performance of hydrogen sensing technologies are thus identified and areas recommended for future research and development. KW - Hydrogen sensor KW - Hydrogen detection KW - Safety KW - Sensor performance testing KW - Performance specifications KW - Performance targets PY - 2010 DO - https://doi.org/10.1016/j.ijhydene.2009.10.064 SN - 0360-3199 VL - 35 IS - 1 SP - 373 EP - 384 PB - Elsevier CY - Oxford AN - OPUS4-22893 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Milmann, Boris A1 - Feldmann, Rüdiger A1 - Friese, Martin A1 - Wöstmann, Jens A1 - Zoëga, Andreas A1 - Sodeikat, C. T1 - Thickness measurement & quality assurance of floor slabs & diaphragm walls T2 - Structural faults & repair 2010 - International conference and exhibition CY - Edinburgh, Scotland, UK DA - 2010-06-15 KW - Ultrasonic echo KW - Radar KW - Impact-echo KW - Synthetic aperture focusing technique (SAFT) KW - Compaction faults PY - 2010 SN - 0-947644-67-9 SP - 1 EP - 9 PB - Engineering Technics Press CY - Edinburgh, Scotland AN - OPUS4-22897 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Adamczyk, Burkart A1 - Brenneis, Rudolf A1 - Adam, Christian A1 - Mudersbach, D. T1 - Recovery of chromium from AOD-converter slags N2 - Slags from the production of high-alloyed steel contain both chemically bound chromium (mainly as Cr2O3) in the mineral fraction and elemental chromium in the metallic remainders. Thermochemical post treatment of the slag in an electric arc furnace under reducing conditions enables the nearly complete recovery of the total amount of chromium in form of a metallic alloy. The best results were achieved by resistance melting (submerged electrodes) with addition of a reducing agent into the melt. The efficiencies of the reducing agents carbon, aluminium, silicon (as ferrosilicon) and silicon carbide were investigated and compared. As aluminium is the strongest reducing agent, it is less selective and reduces much more SiO2 than Cr2O3. While SiC shows only low reactivity because of its high thermal resistance, carbon and silicon had the highest reducing potentials: More than 97% of the chemically bound chromium can be recovered by application of these reducing agents. Due to the high temperature required for the reduction of the chromium compounds, the reduction of SiO2 as an undesired side reaction cannot be avoided. However, compared with mechanical procedures that are limited to the recovery of the metallic remainders, the total chromium recovery can be significantly increased by the described reductive melting procedure. KW - Arc furnace KW - By-product KW - Chromium recovery KW - High-alloyed steel KW - Reductive melting KW - Slag treatment KW - Slag KW - Thermochemical treatment PY - 2010 DO - https://doi.org/10.1002/srin.201000193 SN - 1611-3683 SN - 0177-4832 VL - 81 IS - 12 SP - 1078 EP - 1083 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-22898 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Chinta, P.K. A1 - Mayer, K. A1 - Krause, Martin T1 - Ultraschallmodellierung und SAFT-Rekonstruktion von Fehlstellen in Holzbauteilen T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Ultraschallecho KW - Holz KW - SAFT PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Poster 59) SP - 1 EP - 8 CY - Berlin AN - OPUS4-22899 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Mayer, K. A1 - Ballier, G. A1 - Friese, Martin A1 - Mielentz, Frank A1 - Milmann, Boris T1 - Darstellung des Verpresszustandes von Spannkanälen mit 3D-Ultraschallechoverfahren: Modellierung und Experiment T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Ultraschallecho KW - Rekonstruktionsrechnung KW - SAFT KW - Spannkanäle PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Mi.3.B.1) SP - 1 EP - 12 CY - Berlin AN - OPUS4-22900 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Wilsch, Gerd A1 - Molkentin, A. ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Laser-induced breakdown spectroscopy (LIBS) for evaluation of reinforced concrete structures KW - Laser-induced breakdown spectroscopy KW - LIBS KW - Reinforced concrete KW - Chlorine KW - On-site application PY - 2010 SN - 978-1-84569-950-5 VL - 2 IS - Chapter 9 SP - 163 EP - 184 PB - Woodhead Publ. AN - OPUS4-22901 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Renate A1 - Stopp, V. A1 - Korzen, Manfred A1 - Proschek, P. T1 - Modified test and assessment methods for reactive fire protection systems in EN 13381-8 KW - Steel beams and columns KW - Intumescent coating KW - Dry film thickness KW - Fire resistance period KW - Stickability KW - Design temperatures PY - 2010 DO - https://doi.org/10.1002/stco.201010031 SN - 1867-0520 SN - 1867-0539 VL - 3 IS - 4 SP - 243 EP - 247 PB - Ernst & Sohn CY - Berlin AN - OPUS4-22904 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zhen, S. A1 - Descalzo López, Ana Belén A1 - Rurack, Knut A1 - Kobayashi, N. A1 - Wang, Y.-W. A1 - Lu, H. T1 - Red visible/NIR fluorescent sensors based on pi conjugated boron-dipyrromethene dyes T2 - The International Chemical Congress of Pacific Basin Societies (Pacifichem 2010) CY - Honolulu, HI, USA DA - 2010-12-15 PY - 2010 AN - OPUS4-22867 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rurack, Knut T1 - Particle-based Hybrid Sensor Materials for Photo- and Fluorometric Detection T2 - Molecular Sensors and Molecular Logic Gates (MSMLG-2010) CY - Antalya, Turkey DA - 2010-10-22 PY - 2010 AN - OPUS4-22868 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rurack, Knut T1 - Biological and Biomimetic Approaches toward the Detection of Nitro- and Peroxide-based Explosives T2 - International Workshop on Explosives Detection 2010 CY - Valencia, Spain DA - 2010-11-25 PY - 2010 AN - OPUS4-22869 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wäsche, Rolf A1 - Hartelt, Manfred A1 - Gräber, H.-G. T1 - Experimental study on wear of dental ceramic materials - tests in artificial saliva T2 - 17. International Colloquium on Tribology CY - Filderstadt, Germany DA - 2010-01-19 PY - 2010 AN - OPUS4-22873 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wäsche, Rolf A1 - Urchegui, M.A. A1 - Cruzado, A. A1 - Hartelt, Manfred A1 - Gomez, X. T1 - Wear of thin steel wires T2 - Nordtrib 2010 CY - Luleå, Sweden DA - 2010-06-08 PY - 2010 AN - OPUS4-22874 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wäsche, Rolf A1 - Woydt, Mathias A1 - Yarim, Rasim T1 - Wear of SiC-TiC-TiB2 ceramics at high temperatures and sliding speeds in air T2 - Asiatrib 2010 CY - Perth, Australia DA - 2010-12-05 PY - 2010 AN - OPUS4-22875 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmalenberger, A. A1 - Noll, Matthias T1 - Shifts in fungal and bactrerial communities in grassland turfs suggests that fungi enhance sulfonate desulfurization T2 - 13th International Symposium on Microbial Ecology CY - Seattle, WA, USA DA - 2010-08-22 PY - 2010 AN - OPUS4-22930 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie A1 - Milmann, Boris T1 - Contribution on non-destructive defect detection to bridge management T2 - IABMAS 2010 CY - Philadelphia, PA, USA DA - 2010-07-11 PY - 2010 AN - OPUS4-22933 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weber, Gert A1 - Thommes, H. A1 - Gaul, Holger A1 - Hahn, O. A1 - Rethmeier, Michael T1 - Resistance spot welding and weldbonding of advanced high strength steels KW - Resistance spot welding KW - High strength steel KW - Weldbonding KW - Widerstandspunktschweißen KW - Hochfester Stahl KW - Punktschweißkleben PY - 2010 DO - https://doi.org/10.1002/mawe.201000687 SN - 0933-5137 SN - 1521-4052 VL - 41 IS - 11 SP - 931 EP - 939 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-22948 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Häcker, Ralf A1 - Knothe, Esther A1 - Wossidlo, Peter ED - Pohl, M. T1 - Experimentelle Untersuchungen für die Anwendung von Materialmodellen zur numerischen Auslegung des Containments von Abgasturboladern T2 - Tagung Werkstoffprüfung 2010 CY - Neu-Ulm, Deutschland DA - 2010-12-02 KW - Abgasturbolader KW - Containment KW - Hochgeschwindigkeitsversuch PY - 2010 SN - 978-3-514-00778-9 SP - 317 EP - 322 PB - Verl. Stahleisen GmbH CY - Düsseldorf AN - OPUS4-22949 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühn, Hans-Joachim A1 - Aegerter, J. A1 - Frenz, H. ED - Pohl, M. T1 - DIN EN ISO 6892-1:2009 Der Zugversuch: Erste Erfahrungen aus der praktischen Umsetzung der neuen Norm T2 - Tagung Werkstoffprüfung 2010 CY - Neu-Ulm, Deutschland DA - 2010-12-02 KW - Zugversuch KW - Dehngeschwindigkeit KW - Steifigkeit PY - 2010 SN - 978-3-514-00778-9 SP - 51 EP - 62 PB - Verl. Stahleisen GmbH CY - Düsseldorf AN - OPUS4-22950 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Herbst, Tristan A1 - Hauer, B. A1 - Rübner, Katrin A1 - Meng, Birgit ED - Teipel, U. T1 - Wege zur Bewertung der Einsatzmöglichkeit sekundärer Gesteinskörnungen in Beton T2 - Symposium Rohstoffeffizienz und Rohstoffinnovationen CY - Nürnberg, Deutschland DA - 2010-02-04 KW - Gesteinskörnung KW - Beton KW - Nachhaltigkeit KW - Bewertung KW - Einsatzpotenzial PY - 2010 SN - 978-3-8396-0097-9 SP - 171 EP - 191 PB - Fraunhofer IRB Verl. AN - OPUS4-22952 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Garaleh, M. A1 - Kricheldorf, H.R. A1 - Weidner, Steffen A1 - Yashiro, T. T1 - Hafnium chloride catalyzed polycondensation of Alpha, Omega-alkanediol with dicarboxylic acids or succinic anhydride KW - Polyester KW - Polycondensation KW - Hafnium KW - Cyclization PY - 2010 DO - https://doi.org/10.1080/10601320903539199 SN - 1060-1325 SN - 1520-5738 VL - 47 IS - 4 SP - 303 EP - 308 PB - Taylor & Francis CY - Philadelphia, PA AN - OPUS4-22953 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schwenk, D. A1 - Subaric-Leitis, Andreas T1 - Characteristic quality parameters of measurement - verification and calibration of material testing machines T2 - IMEKO 2010 TC3, TC5 and TC22 Conferences - Metrology in modern context CY - Pattaya, Chonburi, Thailand DA - 2010-11-22 KW - Span KW - Standard deviation KW - Material testing machines PY - 2010 SP - 129 EP - 132 AN - OPUS4-22954 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Marya, S. A1 - Gumenyuk, Andrey T1 - Overview of recent advances in welding - focusing on friction stir welding & laser hybrid welding KW - Friction stir welding KW - Laser-hybrid welding PY - 2010 SN - 0046-9092 VL - 43 IS - 4 SP - 12 EP - 21 CY - Calcutta, India AN - OPUS4-22955 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gook, Sergej A1 - Gumenyuk, Andrey A1 - Lammers, Marco A1 - Rethmeier, Michael T1 - Peculiarities of the process of orbital laser-arc welding of thick-walled large-diameter pipes KW - Hybrid laser-arc welding KW - Orbital welding KW - High-pressure pipelines KW - Fibre-optic lasers PY - 2010 SN - 0957-798X VL - 9 SP - 2 EP - 8 PB - E. O. Paton Electric Welding Institute of the National Acad. of Sciences of Ukraine CY - Kyïv AN - OPUS4-22956 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Plarre, Rüdiger T1 - Grund- und Fachwissen im Holzschutz - Prüfungen von Holzschutzmitteln T2 - RAL Gütegemeinschaft für Holzschutz und Bautenschutz Berlin-Brandenburg, BAM CY - Berlin, Germany DA - 2010-12-10 PY - 2010 AN - OPUS4-22918 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Plarre, Rüdiger T1 - Schädlinge an verarbeitetem Holz - Biologie und Grundlagen der konventionellen Bekämpfung T2 - Verein zur Förderung ökologischer Schädlingsbekämpfung e.V. CY - 47906 Kempen, Deutschland, Krefelder Weg 41, DEULA Rheinland GmbH DA - 2010-11-20 PY - 2010 AN - OPUS4-22922 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hertel, Horst A1 - Plarre, Rüdiger T1 - Termiten, die großen Baumeister der Savanne T2 - Jahresabschlusstreffen Normenausschuss Schweißtechnik (NAS) CY - Berlin, Germany DA - 2010-11-24 PY - 2010 AN - OPUS4-22926 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Cruz, P.J.S. A1 - Topczewski, L. A1 - Fernandes, F.M. A1 - Trela, Christiane A1 - Lourenco, P.B. T1 - Application of radar techniques to the verification of design plans and the detection of defects in concrete bridges N2 - Non-destructive tests (NDT) are an essential tool used in special inspections to gather detailed information about the condition of a bridge. The inspection of bridge decks is a critical task, and, currently, can be successfully carried out using a wide range of NDT techniques. Nevertheless, some of these techniques are excessively expensive and time consuming. One of these techniques, the ground penetrating radar (GPR), has been used for some decades in the non-destructive inspection and diagnosis of concrete bridges. GPR is useful to find general information about the true position of reinforcement and tendon ducts, and check the quality of the construction and materials. A significant number of reinforced and prestressed concrete bridges are deteriorating at a rapid rate and need to be repaired and strengthened. During these rehabilitation processes, designers are often faced with a lack of original design plans and unawareness of the real position of reinforcement and tendon ducts. In this paper, three case studies of the use of GPR techniques for the inspection of concrete bridges are presented and analysed. The main aim of this research is to show the strong need and usefulness of these techniques, which can provide non-visible information about structural geometry and integrity required for strengthening and rehabilitation purposes. KW - Non-destructive tests KW - Ground penetrating radar KW - Tomography KW - Bridge condition assessment KW - Detection of defects PY - 2010 DO - https://doi.org/10.1080/15732470701778506 SN - 1573-2479 SN - 1744-8980 VL - 6 IS - 4 SP - 395 EP - 407 PB - Taylor & Francis CY - London AN - OPUS4-20144 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Naghib Zadeh, Hamid A1 - Glitzky, Carsten A1 - Dörfel, Ilona A1 - Rabe, Torsten T1 - Low temperature sintering of barium titanate ceramics assisted by addition of lithium fluoride-containing sintering additives N2 - By addition of LiF-containing sintering additives to commercial BaTiO3 powder, more than 98% of the theoretical density was reached at a sintering temperature of 900 °C both on powder compacts and laminates. Dielectric measurements were performed on ceramic samples in the temperature and frequency ranges from -20 °C to 125 °C and from 103 to 106 Hz, respectively. High relative permittivity (εr ~ 3160) and low dielectric loss (tan δ ~ 0.014) were measured for tapes of the favoured material. The breakdown strength for tapes with a thickness of about 80 µm is 30 kV/mm. The microprobe analysis showed, that no interfacial reaction between the dielectric layer and the Ag-electrode had occurred. The newly developed barium titanate ceramics completely densifying at 900 °C turned out to be promising for integration of buried capacitors in LTCC multilayers. KW - LTCC KW - BaTiO3 KW - LiF KW - Capacitors PY - 2010 DO - https://doi.org/10.1016/j.jeurceramsoc.2009.07.005 SN - 0955-2219 SN - 1873-619X VL - 30 IS - 1 SP - 81 EP - 86 PB - Elsevier CY - Oxford AN - OPUS4-20133 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herbst, Tristan A1 - Rübner, Katrin A1 - Meng, Birgit A1 - Hauer, B. T1 - Wege zur Bewertung der Einsatzmöglichkeit sekundärer Gesteinskörnungen in Beton T2 - Symposium "Rohstoffeffizienz und Rohstoffinnovationen" CY - Ettlingen, Germany DA - 2010-02-04 PY - 2010 AN - OPUS4-20115 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Baier, Jennifa A1 - Beck, Uwe A1 - Lange, Thorid A1 - Mollath, G. A1 - Sahre, Mario A1 - Spille-Kohoff, A. T1 - Effect fo Process Conditions on Microscopic Structure and Macroscopic Properties of Zinc-Based Coatings T2 - 37th International Conference On Metallurgical Coatings & Thin Films CY - San Diego, CA, USA DA - 2010-04-26 PY - 2010 AN - OPUS4-20088 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fedelich, Bernard A1 - Vöse, Markus T1 - Modelling of creep damage by multiple cavity growth on grain boundaries T2 - European Conference on Fracture 18 CY - Dresden, Germany DA - 2010-08-30 PY - 2010 AN - OPUS4-20074 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maziere, Matthieu A1 - Fedelich, Bernard T1 - Simulation of fatigue crack growth by crack tip plastic blunting using cohesive zone elements T2 - European Conference on Fracture 18 CY - Dresden, Germany DA - 2010-08-30 PY - 2010 AN - OPUS4-20075 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - DeRose, P.C. A1 - Resch-Genger, Ute T1 - Recommendations for fluorescence instrument qualification: the new ASTM standard guide N2 - Aimed at improving quality assurance and quantitation for modern fluorescence techniques, ASTM International (ASTM) is about to release a Standard Guide for Fluorescence, reviewed here. The guide's main focus is on steady state fluorometry, for which available standards and instrument characterization procedures are discussed along with their purpose, suitability, and general instructions for use. These include the most relevant instrument properties needing qualification, such as linearity and spectral responsivity of the detection system, spectral irradiance reaching the sample, wavelength accuracy, sensitivity or limit of detection for an analyte, and day-to-day performance verification. With proper consideration of method-inherent requirements and limitations, many of these procedures and standards can be adapted to other fluorescence techniques. In addition, procedures for the determination of other relevant fluorometric quantities including fluorescence quantum yields and fluorescence lifetimes are briefly introduced. The guide is a clear and concise reference geared for users of fluorescence instrumentation at all levels of experience and is intended to aid in the ongoing standardization of fluorescence measurements. KW - Fluorescence KW - Method KW - Quantum yield KW - Photoluminescence KW - Standard KW - Emission KW - Spectral correction KW - Excitation KW - Anisotropy KW - Recommendation KW - Instrument qualification PY - 2010 DO - https://doi.org/10.1021/ac902507p SN - 0003-2700 SN - 1520-6882 VL - 82 IS - 5 SP - 2129 EP - 2133 PB - American Chemical Society CY - Washington, DC AN - OPUS4-21066 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zencker, Uwe T1 - Numerische Werkstoff- und Bauteilsimulation T2 - 2. RAM-Behältersicherheitstage 2010, BAM CY - Berlin, Germany DA - 2010-03-18 PY - 2010 AN - OPUS4-21067 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hahn, Oliver ED - Schubert, M. T1 - Zerstörungsfreie naturwissenschaftliche Untersuchung von historischem Schriftgut KW - Kulturgut KW - Archäometrie KW - Editionswissenschaften PY - 2010 SN - 978-3-11-023130-4 N1 - Serientitel: Schriftenreihe editio – Series title: Schriftenreihe editio IS - Sonderdruck zu editio 32 SP - 15 EP - 26 PB - De Gruyter AN - OPUS4-21068 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kitze, Jessica T1 - Materialprüfung mit Ultraschall unter Verwendung von SAFT und der Gruppenstrahlertechnik T2 - DAGA Berlin, Jahrestagung für Akustik CY - Berlin, Germany DA - 2010-03-15 PY - 2010 AN - OPUS4-21069 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wäsche, Rolf A1 - Hartelt, Manfred A1 - Gräber, H.G. T1 - Experimental study on wear of dental ceramic materials - tests in artificial saliva T2 - 17th International colloquium tribology - Solving friction and wear problems CY - Stuttgart/Ostfildern, Germany DA - 2010-01-19 KW - Fretting KW - Life science KW - Wear KW - Dental materials PY - 2010 SN - 3-924813-80-9 IS - Special aspects of tribology SP - 1 EP - 7 AN - OPUS4-21070 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lück, S. A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Schmidt, V. T1 - Statistical analysis of tomographic reconstruction algorithms by morphological image characteristics N2 - We suggest a procedure for quantitative quality control of tomographic reconstruction algorithms. Our task-oriented evaluation focuses on the correct reproduction of phase boundary length and has thus a clear implication for morphological image analysis of tomographic data. Indirectly the method monitors accurate reproduction of a variety of locally defined critical image features within tomograms such as interface positions and microstructures, debonding, cracks and pores. Tomographic errors of such local nature are neglected if only global integral characteristics such as mean squared deviation are considered for the evaluation of an algorithm. The significance of differences in reconstruction quality between algorithms is assessed using a sample of independent random scenes to be reconstructed. These are generated by a Boolean model and thus exhibit a substantial stochastic variability with respect to image morphology. It is demonstrated that phase boundaries in standard reconstructions by filtered backprojection exhibit substantial errors. In the setting of our simulations, these could be significantly reduced by the use of the innovative reconstruction algorithm DIRECTT. KW - Tomography KW - Computed tomography KW - Reconstruction algorithm KW - Morphological image analysis KW - Phase boundary KW - Metrology KW - Non-destructive testing PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-210710 DO - https://doi.org/10.5566/ias.v29.p61-77 SN - 1580-3139 SN - 1854-5165 VL - 29 SP - 61 EP - 77 CY - Ljubljana, Slovenia AN - OPUS4-21071 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schurig, Michael A1 - Häßlich, Mirko A1 - Klinger, Christian T1 - Der Temperaturgang von Beschleunigungssensoren und sein Einfluss auf die Messunsicherheit bei kombinierten Vibrations- und Klimaprüfungen N2 - Die Empfindlichkeit von Beschleunigungssensoren hängt von der Temperatur ab, bei der sie eingesetzt werden. Aus diesem Grund fordert der Entwurf der Neuausgabe von IEC 60068-2-53, dass Beschleunigungssensoren bei allen Prüftemperaturen kalibriert sein müssen. Darüber hinaus müssen die Grenzabweichungen der entsprechenden dynamischen Prüfverfahrensnormen eingehalten werden. Das Messunsicherheitsbudget für die Beschleunigungsmessung bei einer kombinierten Vibrations- und Klimaprüfung wird aufgestellt. Einflussgrößen sind die Kalibrierunsicherheit, der Frequenz- und Temperaturgang des Sensors, sowie die Messunsicherheit der elektrischen Messkette. Anhand typischer Prüfbedingungen werden Kriterien aufgestellt, wann der Temperaturgang für die Prüfung relevant wird. Eigene Untersuchungen und Hinweise aus der Literatur zeigen, dass dies eher selten der Fall ist. Gegebenenfalls muss auf geeignete Maßnahmen zur Verringerung der Messunsicherheit zurückgegriffen werden. Eine Kompensation des Temperaturganges ist möglich, aber derzeit noch aufwändig. T2 - 39. Jahrestagung der Gesellschaft für Umweltsimulation (GUS) CY - Stutensee, Germany DA - 2010-03-17 PY - 2010 AN - OPUS4-21072 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neitsch, Marcel T1 - Verpackungen aus Pappe, Papier oder Holz - Neue Überwachungsunterlagen! T2 - Informationsaustausch Qualitätssicherung und Überwachung bei der Herstellung von Gefahrgutverpackungen - AK Pappe/Papier/Holz CY - Berlin, Germany DA - 2010-04-21 PY - 2010 AN - OPUS4-21128 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wytrykus, Nancy T1 - Qualitätssicherung - Informationen zur gegenwärtigen Lage T2 - Informationsaustausch Qualitätssicherung und Überwachung bei der Herstellung von Gefahrgutverpackungen - AK Pappe/Papier/Holz CY - Berlin, Germany DA - 2010-04-21 PY - 2010 AN - OPUS4-21129 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lutz, W. A1 - Kurzhals, R. A1 - Sauerbeck, S. A1 - Toufar, H. A1 - Buhl, J.-C. A1 - Gesing, T. A1 - Altenburg, Wolfgang A1 - Jäger, Christian T1 - Hydrothermal stability of zeolite SAPO-11 N2 - The hydrothermal stability of SAPO-11 was studied in water of autogenous pressure as function of the temperature. SAPO-11 remained crystalline up to 190 °C. Thereby, it was observed, parent as well as hydrothermally treated samples showed similarities to the isotypic structure of zeolite AlPO-11 called here AELdry. After fully hydration of the samples, AELdry changed completely into a hydrated AELwet structure of another framework symmetry. The transition from calcined to hydrated state was reversible for both the parent and the hydrothermally treated samples. 27Al and 31P NMR MAS spectra showed a single resonance typical for AlPO4 type tetrahedra for the calcined parent and hydrothermally treated samples. Upon hydration, the single AlPO4 resonance signal split into three different signals as is the case for the corresponding 31P signals. By means of NH3-TPD measurement a loss of acidity was detected after the hydrothermal treatment as follows from a framework desilication. Nitrogen and water adsorption decreased systematically. At 210 °C a non-zeolitic, non-porous phase was irreversibly formed. The XRD pattern of this phase shows resemblance to a synthetic aluminium phosphate of the tridymite structure type. KW - Zeolite KW - Silicoaluminophosphate KW - SAPO-11 KW - Hydrothermal stability KW - Phase transformation PY - 2010 DO - https://doi.org/10.1016/j.micromeso.2009.08.003 SN - 1387-1811 SN - 1873-3093 VL - 132 IS - 1-2 SP - 31 EP - 36 PB - Elsevier CY - Amsterdam AN - OPUS4-21131 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Debatin, F. A1 - Thomas, A. A1 - Kelling, A. A1 - Hedin, N. A1 - Bacsik, Z. A1 - Senkovska, I. A1 - Kaskel, S. A1 - Junginger, M. A1 - Müller, H. A1 - Schilde, U. A1 - Jäger, Christian A1 - Friedrich, A. A1 - Holdt, H.-J. T1 - In situ synthesis of an imidazolate-4-amide-5-imidate ligand and formation of a microporous zinc-organic framework with H2-and CO2-storage ability KW - Metal-organic framework KW - Synthesis KW - XRD KW - FTIR KW - NMR KW - Gas sorption KW - Microporous materials KW - N,O ligands KW - Solvothermal synthesis PY - 2010 DO - https://doi.org/10.1002/anie.200906188 SN - 1433-7851 SN - 1521-3773 SN - 0570-0833 VL - 49 IS - 7 SP - 1258 EP - 1262 PB - Wiley-VCH CY - Weinheim AN - OPUS4-21132 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bettge, Dirk A1 - Klinger, Christian A1 - Häcker, Ralf A1 - Heckel, Thomas A1 - Gohlke, Dirk T1 - Schadensanalyse an Komponenten von Schienenfahrzeugen T2 - Erfahrungsaustausch der Sachverständigen im Eisenbahnwesen CY - Meiningen, Germany DA - 2010-04-14 PY - 2010 AN - OPUS4-21133 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zhukovskiy, M. A1 - Skachkov, M. A1 - Deresch, Andreas A1 - Jaenisch, Gerd-Rüdiger A1 - Bellon, Carsten ED - Thompson, D.O. ED - Chimenti, D.E. T1 - Simulation of electron transport T2 - 36th Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Kingston, RI, USA DA - 2009-07-26 KW - Electron transport KW - Monte Carlo method KW - Stopping power KW - Simulation KW - Elektronentransport PY - 2010 SN - 978-0-7354-0748-0 SN - 0743-0760 SN - 0094-243X N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings VL - 1211 SP - 572 EP - 578 CY - Melville, NY AN - OPUS4-21134 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank A1 - Droste, Bernhard A1 - Müller, Karsten A1 - Zencker, Uwe T1 - Recent experiences in mechanical design assessment of spent fuel and HLW casks by competent authority in Germany - 10093 T2 - WM2010 Conference CY - Phoenix, Arizona, USA DA - 2010-03-07 KW - Design testing KW - Transport packages KW - Numerical analysis PY - 2010 SP - 1 EP - 10 AN - OPUS4-21106 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schurig, Michael A1 - Häßlich, Mirko A1 - Klinger, Christian ED - Ziegahn, K.-F. T1 - Der Temperaturgang von Beschleunigungssensoren und sein Einfluss auf die Messunsicherheit bei kombinierten Vibrations- und Klimaprüfungen N2 - Die Empfindlichkeit von Beschleunigungssensoren hängt von der Temperatur ab, bei der sie eingesetzt werden. Aus diesem Grund fordert der Entwurf der Neuausgabe von IEC 60068-2-531[1], dass Beschleunigungssensoren bei allen Prüftemperaturen kalibriert sein müssen. Darüber hinaus müssen die Grenzabweichungen der entsprechenden dynamischen Prüfverfahrensnormen eingehalten werden. Das Messunsicherheitsbudget für die Beschleunigungsmessung bei einer kombinierten Vibrations- und Klimaprüfung wird aufgestellt. Einflussgrößen sind die Kalibrierunsicherheit, der Frequenz- und Temperaturgang des Sensors, sowie die Messunsicherheit der elektrischen Messkette. Anhand typischer Prüfbedingungen werden Kriterien aufgestellt, wann der Temperaturgang für die Prüfung relevant wird. Eigene Untersuchungen [2] und Hinweise aus der Literatur [3] zeigen, dass dies eher selten der Fall ist. Gegebenenfalls muss auf geeignete Maßnahmen zur Verringerung der Messunsicherheit zurückgegriffen werden. Eine Kompensation des Temperaturganges ist möglich [4], aber derzeit noch aufwändig. T2 - 39. Jahrestagung der GUS 2010 - Umweltflüsse erfassen, simulieren, bewerten CY - Stutensee, Deutschland DA - 2010-03-17 PY - 2010 SN - 978-3-9813136-0-4 SP - 135 EP - 147 PB - DWS Werbeagentur und Verlag GmbH CY - Pfinztal AN - OPUS4-21107 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gorbushina, Anna ED - Ziegahn, K.-F. T1 - Idealbiofilm als neues Testsystem: Laborsimulation von Umwelteinflüssen und biologischer Einwirkung auf Materialien T2 - 39. Jahrestagung der GUS 2010 - Umweltflüsse erfassen, simulieren, bewerten CY - Stutensee, Deutschland DA - 2010-03-17 KW - Materialschäden KW - Mikrobielle Vergesellschaftungen KW - Pilze KW - Cyanobakterien PY - 2010 SN - 978-3-9813136-0-4 SP - 197 EP - 207 PB - DWS Werbeagentur und Verlag GmbH CY - Pfinztal AN - OPUS4-21109 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weißhaupt, Petra A1 - Pritzkow, Wolfgang A1 - Noll, Matthias T1 - Exploring nitrogen sources of wood rotting basidiomycetes T2 - Jahrestagung der Vereinigung für allgemeine und angewandte Mikrobiologie (VAAM) CY - Hanover, Germany DA - 2010-03-28 PY - 2010 AN - OPUS4-21111 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Noll, Matthias A1 - Bräunlich, Lydia A1 - Weißhaupt, Petra A1 - David, Madlen A1 - Pritzkow, Wolfgang T1 - Interactions of wood rotting basidiomycetes and diazotrophs. T2 - Jahrestagung der Vereinigung für allgemeine und angewandte Mikrobiologie (VAAM) CY - Hanover, Germany DA - 2010-03-28 PY - 2010 AN - OPUS4-21112 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Noll, Matthias A1 - Pritzkow, Wolfgang A1 - Ojeda, J.J. A1 - Schmalenberger, A. T1 - Sulfate-esters are main sulfur source of wood-degrading basidiomycetes as revealed by S K-edge X-ray Absorption Near Edge Spectroscopy (XANES). T2 - Jahrestagung der Vereinigung für allgemeine und angewandte Mikrobiologie (VAAM) CY - Hanover, Germany DA - 2010-03-28 PY - 2010 AN - OPUS4-21113 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kunte, Hans-Jörg A1 - Schwibbert, Karin A1 - Sanguino, A.M. A1 - Bagyan, I. A1 - Heidrich, Gabriele A1 - Lentzen, G. A1 - Seitz, H. A1 - Rampp, M. A1 - Schuster, S. A1 - Klenk, H.-P. A1 - Pfeiffer, F. A1 - Oesterhelt, D. T1 - A Blueprint of Ectoine Metabolism from the Genome of the Industrial Producer Halomonas elongate DSM 2581T T2 - Jahrestagung der Vereinigung für allgemeine und angewandte Mikrobiologie (VAAM) CY - Hanover, Germany DA - 2010-03-28 PY - 2010 AN - OPUS4-21114 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scholz, Christian A1 - Woydt, Mathias A1 - Manier, Charles-Alix T1 - Slip-rolling resistance of high performance thin films and high toughness steel substrates under extreme conditions T2 - Tribology and Design 2010 CY - Carvoeiro, Portugal DA - 2010-05-11 PY - 2010 AN - OPUS4-21115 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sarmiento Klapper, Helmuth T1 - Rauschuntersuchungen zum Einfluss des Kathodischen Prozesses auf die Passivschichtumwandlung T2 - GfKORR AK-Sitzung Prüf- und Untersuchungsverfahren CY - Frankfurt am Main, Germany DA - 2010-04-22 PY - 2010 AN - OPUS4-21146 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sarmiento Klapper, Helmuth A1 - Bäßler, Ralph T1 - Alternative, nachhaltige Energiekonzepte - Herausforderungen für Werkstoffe zum Einsatz in Geothermieanlagen T2 - 3-Länder-Korrosionstagung, BAM CY - Berlin, Germany DA - 2010-04-19 PY - 2010 AN - OPUS4-21147 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Antes, Jürgen A1 - Gegenheimer, M. A1 - Löbbecke, S. A1 - Krause, H. A1 - Knorr, Annett A1 - Wirker, Ringo A1 - Fritzsche, Lutz T1 - Spatially-resolved heat flow measurements in microsystems: Powerful tool for thermokinetic Studies T2 - IMRET11, 11th International Conference on Microreaction Technology CY - Kyoto, Japan DA - 2010-03-08 PY - 2010 AN - OPUS4-21148 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wirker, Ringo A1 - Knorr, Annett A1 - Franke, R. A1 - Löb, P. A1 - Klemm, E. T1 - Risk analysis for the ozonlysis of cis-cyclooctene: stierred tank versus micro reactor T2 - IMRET11, 11th International Conference on Microreaction Technology CY - Kyoto, Japan DA - 2010-03-08 PY - 2010 AN - OPUS4-21149 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Burkert, Andreas A1 - Fischer, Joachim A1 - Lehmann, Jens A1 - Saal, H. A1 - Ulbrich, D. T1 - Werkstoffauswahl nichtrostender Stähle im Bauwesen entsprechend der allgemeinen bauaufsichtlichen Zulassung Z-30.3-6 T2 - 3-Länder-Korrosionstagung - Nichtrostende Stähle - Spezielle Anwendungen und angepasste Lösungen CY - Berlin, Deutschland DA - 2010-04-19 KW - Nichtrostender Stahl KW - Werkstoffauswahl KW - Verarbeitung KW - Korrosionsschutz KW - Korrosion KW - Dauerhaftigkeit PY - 2010 SN - 978-3-935406-40-6 SP - 18 EP - 26 PB - DECHEMA AN - OPUS4-21152 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wehrstedt, Klaus-Dieter A1 - Döring, Ingo A1 - Franke, Werner A1 - Holtappels, Kai A1 - Krischok, Frank A1 - Michael-Schulz, Heike A1 - Oeleker, Karin A1 - von Oertzen, Alexander A1 - Pötzsch, Klaus-Michael A1 - Priefer, Yvonne A1 - Thomalla, Nadine T1 - Empfehlungen für die Beförderung gefährlicher Güter - Handbuch über Prüfungen und Kriterien N2 - Die "Empfehlungen für die Beförderung gefährlicher Güter, Handbuch über Prüfungen und Kriterien" ergänzen die "Empfehlungen für die Beförderung gefährlicher Güter, Modellvorschriften" und das "Global harmonisierte System zur Einstufung und Kennzeichnung von Chemikalien (GHS)". Sie enthalten Kriterien, Prüfmethoden und –verfahren, die angewendet werden sowohl für die Einstufung gefährlicher Güter nach den Vorschriften der Teile 2 und 3 der Modellvorschriften als auch für Chemikalien, von denen nach dem GHS physikalische Gefahren ausgehen. KW - Gefährliche Güter KW - United Nations KW - Kriterien KW - Prüfverfahren KW - Prüfmethoden KW - Klassifizierungsverfahren KW - Explosivstoffe KW - Gegenstände KW - Ammoniumnitrat KW - Detonationsweiterleitung KW - Koenen-Prüfung KW - Erwärmung unter Einschluss KW - Deflagrationsweiterleitung KW - Selbstbeschleunigende Zersetzungstemperatur KW - Schlagempfindlichkeit KW - Reibempfindlichkeit KW - Explosive Eigenschaften KW - Thermische Stabilität KW - Thermische Explosion KW - Gase KW - Desensibilisierte Explosivstoffe KW - Selbstzersetzliche Stoffe KW - Pyrophore Stoffe KW - Organische Peroxide KW - UN Gap-Prüfung KW - Druck-Zeit-Prüfung KW - BAM Fallhammer KW - BAM Reibapparat KW - Thermische Stabilitätsprüfung KW - Brandprüfung KW - DDT-Prüfung KW - Außenbrandprüfung KW - Stapelprüfung KW - Kapsel-Empfindlichkeitsprüfung KW - Deflagration-Detonation-Übergangsprüfung KW - BAM 50&60 Stahlrohrprüfung KW - TNO 50/70 Stahlrohrprüfung KW - UN Detonationsprüfung KW - Deflagrationsprüfung KW - Holländische Druckgefäßprüfung KW - Ballistische Mörserprüfung KW - BAM Trauzl Prüfung KW - SADT KW - Warmlagerungsprüfung KW - Adiabatische Lagerprüfung KW - Isotherme Lagerprüfung KW - Entzündbare Aerosole KW - Entzündbare flüssige Stoffe KW - Flammpunkt KW - Selbstunterhaltende Verbrennung KW - Entzündbare feste Stoffe KW - Selbstentzündliche Stoffe KW - Entzündbare Gase KW - Oxidierend wirkende Stoffe KW - Korrosive Eigenschaften KW - Düngemittel KW - Exotherme Zersetzung KW - Lithium-Metall-Batterien KW - Lithium-Ionen-Batterien KW - Ortsbewegliche Tanks KW - Dynamische longitudinale Stoßprüfung KW - Standarddetonatoren KW - Kavitation KW - Druckentlastungseinrichtungen PY - 2010 SN - 978-3-9813550-0-0 N1 - Diese Ausgabe ist nicht mehr gültig, ein Link auf die nachfolgende Fassung befindet sich im Feld zugeöriger Identifikator. - This edition is no longer valid, a link to the following version is in the field related identifier. N1 - Geburtsname von Thomalla, Nadine: Schleyer, N. - Birth name of Thomalla, Nadine: Schleyer, N. SP - 1 EP - 490 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin ET - 5. AN - OPUS4-21153 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beckmann, Jörg A1 - von Chrzanowski, Lars A1 - Ewert, Uwe A1 - Marchetti, Barbara A1 - Schade, U. T1 - TERAHERTZ TIME DOMAIN SPECTROSCOPY - PERSPECTIVES FOR STAND OFF INSPECTION OF LIQUIDS T2 - Laser Optics CY - Berlin, Germany DA - 2010-03-22 PY - 2010 AN - OPUS4-21154 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von Chrzanowski, Lars A1 - Beckmann, Jörg A1 - Marchetti, Barbara A1 - Ewert, Uwe A1 - Schade, U. T1 - TRANSMISSION EXPERIMENTS OF POLAR AND NON POLAR LIQUIDS WITH TERAHERTZ TIME DOMAIN SPECTROSKOPY T2 - 456. WE-Heraeus Seminar: THz Radiation: Generation, Detection and Applications CY - Bad Honnef, Germany DA - 2010-04-18 PY - 2010 AN - OPUS4-21155 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ewers, Benjamin A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Müller, Bernd R. A1 - Hoehl, A. A1 - Müller, R. A1 - Ulm, G. T1 - Terahertz Spectral Computed Tomography T2 - Vortrrag 4th Workshop on Terahertz Technology CY - Kaiserslautern, Germany DA - 2010-03-03 PY - 2010 AN - OPUS4-21076 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ewers, Benjamin A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. T1 - Terahertz Spectral Imaging Techniques in NDT: Topography and Computed Tomography T2 - Laser Optics CY - Berlin, Germany DA - 2010-03-22 PY - 2010 AN - OPUS4-21077 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gradt, Thomas A1 - Hübner, Wolfgang T1 - Friction and wear behaviour of stainless steels in liquid hydrogen T2 - International Hydrogen Energy Development Forum 2010 CY - Fukuoka, Japan DA - 2010-02-03 PY - 2010 AN - OPUS4-21078 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. T1 - Neutron CT Reconstruction of a 3-fold fuel cell stack using DIRECT T2 - Vortrag am ZSW CY - Stuttgart, Germany DA - 2010-02-19 PY - 2010 AN - OPUS4-21079 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kannengießer, Thomas T1 - Einfluss der Wärmeführung auf den Spannungsaufbau beim Schweißen hochfester Konstruktionen T2 - Konzernforschungsseminar Voest-Alpine CY - Linz, Austria DA - 2010-03-23 PY - 2010 AN - OPUS4-21080 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Verfleckungen auf Edelstahl Rostfrei T2 - 30. Frühjahrsseminar der Fachgruppe Stahlbau-Schlosserei-Schweißen "Techniktage am Schluchsee" CY - Schluchsee, Germany DA - 2010-03-12 PY - 2010 AN - OPUS4-21081 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mann, Guido A1 - Jurke, Mathias A1 - Zoheidi, M. A1 - Eberstein, Markus A1 - Krüger, Jörg T1 - Influence of core diameter and coating material on nanosecond laser-induced damage threshold of optical multimode fibers N2 - Single and multi pulse laser-induced damage thresholds (LIDT) of core, cladding, and coating materials of high-power optical multimode fibers were determined in accordance with ISO 11254 for 532 nm and 1064 nm wavelength in the 10-ns pulse duration regime with spatial Gaussian beam shape. For all-silica fibers, LIDT increases with rising core diameter in a range between 100-600 µm for a constant cladding-core ratio of 1.2. The damage resistance of the low refracting cladding (0.3 % fluorine doped fused silica) is comparable to the undoped SiO2 core. Coating materials show significantly lower LIDT than light-guiding parts of the fibers. KW - Fiber waveguides (42.81.Qb) KW - Physical radiation damage (61.80.-x) KW - Laser-beam impact phenomena (79.20.Ds) KW - Glasses (81.05.Kf) PY - 2010 SN - 1454-4164 VL - 12 IS - 3 SP - 711 EP - 714 PB - INOE & INFM CY - Bucharest AN - OPUS4-21083 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Koter, Robert A1 - Weise, Matthias A1 - Hertwig, Andreas A1 - Beck, Uwe A1 - Krüger, Jörg T1 - Influence of film thickness and optical constants on femtosecond laser-induced ablation of hydrogenated amorphous carbon films N2 - Hydrogenated amorphous carbon layers were deposited on BK7 glass in a plasma-assisted chemical vapor deposition process. Low and high refracting films with thicknesses d ranging from 11 nm to 5.8 µm were produced having refractive indices n between 1.68 and 2.41 and linear absorption coefficients of α~100 cm-1 and α~20000 cm-1 at 800 nm wavelength as a result of different plasma modes. Laser ablation thresholds Fth in dependence on d were determined using 30-fs laser pulses. Low absorbing layers show a constant Fth while Fth increases with rising d up to the optical penetration depth of light α-1 for high absorbing films. KW - Physical radiation damage (61.80.-x) KW - Laser-beam impact phenomena (79.20.Ds) KW - Radiation treatment (81.40.Wx) KW - Carbon (81.05.Uw) KW - Optical constants (78.20.Ci) PY - 2010 SN - 1454-4164 VL - 12 IS - 3 SP - 663 EP - 667 PB - INOE & INFM CY - Bucharest AN - OPUS4-21084 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bartholmai, Matthias A1 - Köppe, Enrico ED - León, F.P. ED - Sommer, K.-D. ED - Heizmann, M. T1 - Funksensornetzwerk zur Strukturüberwachung und Schadensfrüherkennung an Bauwerken KW - Funksensorik KW - Sensornetzwerk KW - Schadensfrüherkennung KW - Strukturüberwachung PY - 2010 SN - 978-3-86644-476-8 SP - 49 EP - 56 PB - KIT Scientific Publishing CY - Karlsruhe AN - OPUS4-21086 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - García, O. A1 - Rz-Maribona, I. A1 - Gardei, André A1 - Riedl, Martin A1 - Vanhellemont, Y. A1 - Santarelli, M.L. A1 - Strupi Suput, J. T1 - Comparative study of the variation or the hydric properties and aspect of natural stone and brick after the application of 4 types of anti-graffiti N2 - In this article a comparative study of the behaviour of different commercial anti-graffiti on natural stone and brick is presented. 8 different European substrates were selected and 4 commercial anti-graffiti of different chemical nature were applied on these substrates. The variations of their hydric properties and aspect (colour and gloss) with regard to the untreated substrates were later studied in the laboratory. The results obtained permitted to assess the suitability of 4 of the main types of chemical formulations employed to be used as anti-graffiti. This study concludes that the sacrificial anti-graffiti with polymeric paraffins in its composition presents the lowest reductions of the hydric properties of the studied substrates, being also the variations in colour the least perceptible. KW - Graffiti KW - Sandstone KW - Limestone KW - Natural stone KW - Brick KW - Anti-graffiti KW - Porous substrates KW - Surface treatments KW - Anti-graffiti coatings KW - Hydric properties KW - Colour KW - Gloss PY - 2010 DO - https://doi.org/10.3989/mc.2010.45507 SN - 0465-2746 N1 - Sprachen: Spanisch/Englisch - Languages: Spanish/English VL - 60 IS - 297 SP - 1 EP - 14 CY - Madrid AN - OPUS4-21087 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Deuerler, F. T1 - Comparison of the resistance to oxidative degradation of polyethylene grades with the test performance behavior of packagings for the transport of dangerous goods T2 - NACE International Corrosion Conference 2010 CY - San Antonio, Texas, USA DA - 2010-03-14 KW - Dangerous goods packagings KW - Polyethylene grades KW - Resistance to oxidative degradation KW - Design type tests KW - FTIR spectroscopy PY - 2010 SP - 10044-1 - 10044-13 AN - OPUS4-21089 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Siegel, David A1 - Koch, Matthias A1 - Nehls, Irene T1 - New results on the thermal degradation of Alternaria mycotoxins in food matrices T2 - 32. Mycotoxin Workshop CY - Copenhagen, Denmark DA - 2010-06-14 PY - 2010 AN - OPUS4-21090 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Siegel, David A1 - Koch, Matthias A1 - Nehls, Irene T1 - Novel applications of hydrazine chemistry in the instrumental analysis of food mycotoxins T2 - 32. Mycotoxin Workshop CY - Copenhagen, Denmark DA - 2010-06-14 PY - 2010 AN - OPUS4-21091 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Siegel, David A1 - Koch, Matthias A1 - Nehls, Irene T1 - Novel applications of hydrazine chemistry in the instrumental analysis of food mycotoxins T2 - Vrije Universiteit Amsterdam, Arbeitsgruppe Prof. Irth CY - Amsterdam, Netherlands DA - 2010-02-03 PY - 2010 AN - OPUS4-21092 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Huismann, Sven A1 - Weise, Frank A1 - Meng, Birgit A1 - Schneider, U. T1 - Influence of Polypropylene Fibres on the Thermal Strain of High Strength Concrete at High Temperatures T2 - Sixth International Conference on Sturctures in Fire CY - East Lansing, MI, USA DA - 2010-06-02 PY - 2010 AN - OPUS4-21095 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Deresch, Andreas A1 - Jaenisch, Gerd-Rüdiger A1 - Bellon, Carsten A1 - Warrikhoff, A. ED - Thompson, D.O. ED - Chimenti, D.E. T1 - Simulation and experimental verification of X-ray spectra T2 - 36th Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Kingston, RI, USA DA - 2009-07-26 KW - X-ray KW - Spectrum KW - Simulation KW - Röntgenspektrum KW - Dekonvolution PY - 2010 SN - 978-0-7354-0748-0 SN - 0743-0760 SN - 0094-243X N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings VL - 1211 SP - 535 EP - 540 CY - Melville, NY AN - OPUS4-21136 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaenisch, Gerd-Rüdiger A1 - Bellon, Carsten A1 - Schumm, A. A1 - Tabary, J. A1 - Duvauchelle, P. ED - Thompson, D.O. ED - Chimenti, D.E. T1 - Radiographic benchmark problem 2009 - scatter calculations in modelling T2 - 36th Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Kingston, RI, USA DA - 2009-07-26 KW - Radiography KW - Justifications or modifications of Monte Carlo methods KW - Emission KW - Absorption and scattering of electromagnetic radiation KW - X-ray scattering KW - Simulation KW - Röntgenspektrum Benchmark KW - Monte Carlo Modell PY - 2010 SN - 978-0-7354-0748-0 SN - 0743-0760 SN - 0094-243X N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings VL - 1211 SP - 2117 EP - 2124 CY - Melville, NY AN - OPUS4-21137 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pretsch, Thorsten T1 - Thermo-mechanical Effects of hydrolytic Aging on an active Polymer with Triple-Shape Properties T2 - Polychar 18 - World Forum on Advanced Materials CY - Siegen, Germany DA - 2010-04-07 PY - 2010 AN - OPUS4-21138 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krohne, Korinna A1 - Maskos, Michael T1 - Topologically controlled interpolyelectrolyte complexes T2 - ACS 239th National Meeting 2010 CY - San Francisco, CA, USA DA - 2010-03-21 PY - 2010 AN - OPUS4-21139 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller-Mai, C. A1 - Knabe, C. A1 - Bednarek, A. A1 - Houshmand, A. A1 - Stiller, M. A1 - Jörn, Daniela A1 - Berger, Georg T1 - Degradable bone cements for percutaneous augmentation of bone defects T2 - 12th Intern. and Interdisciplinary Symp. Biomaterials and Biomechanics: Fundamentals and Clinical Applications 2010, Univ. Duisburg-Essen CY - Duisburg-Essen, Germany DA - 2010-03-17 PY - 2010 AN - OPUS4-21140 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Naghib Zadeh, Hamid A1 - Rabe, Torsten T1 - Hoch dielektrische Bariumtitanat-Werkstoffe mit LTCC kompatibler Sintertemperatur T2 - DKG-Jahrestagung u. Symposium Hochleistungskeramik CY - Hermsdorf (Thuringia), Germany DA - 2010-03-22 PY - 2010 AN - OPUS4-21141 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rabe, Torsten T1 - Druckunterstütztes Sintern von Folien und Laminaten T2 - DKG-Jahrestagung u. Symposium Hochleistungskeramik CY - Hermsdorf (Thuringia), Germany DA - 2010-03-22 PY - 2010 AN - OPUS4-21142 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gemeinert, Marion T1 - Niedrig sinternde LTCC-Werkstoffe für mikrosystemtechnische Anwendungen T2 - DKG-Jahrestagung u. Symposium Hochleistungskeramik CY - Hermsdorf (Thuringia), Germany DA - 2010-03-22 PY - 2010 AN - OPUS4-21143 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Steinborn, Gabriele A1 - Kuchenbecker, Petra A1 - Scheler, S. T1 - Ergebnisse eines Ringversuches zur Partikelgrößenbestimmung an wässrigen Nanopulver-Suspensionen mit dem Ultraschallspektrometer DT1200 T2 - DKG-Jahrestagung CY - Hermsdorf (Thuringia), Germany DA - 2010-03-22 PY - 2010 AN - OPUS4-21144 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ried, Peter A1 - Burnat, D. A1 - Heel, A. A1 - Holtappels, P. A1 - Sitte, W. T1 - Application of nanopowders as SOFC cathode layers T2 - DKG-Jahrestagung u. Symposium Hochleistungskeramik CY - Hermsdorf (Thuringia), Germany DA - 2010-03-22 PY - 2010 AN - OPUS4-21145 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank A1 - Droste, Bernhard A1 - Müller, Karsten A1 - Zencker, Uwe T1 - Recent Experiences in Mechanical Design Assessment of Spent Fuel and HLW Casks by Competent Authority in Germany T2 - Waste Management Conference 2010 CY - Phoenix, AZ, USA DA - 2010-03-07 PY - 2010 AN - OPUS4-21117 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Matthias A1 - Köppen, Robert A1 - Rasenko, Tatjana A1 - Klein-Hartwig, Karin A1 - Proske, Matthias A1 - Siegel, David A1 - Bremser, Wolfram A1 - Nehls, Irene T1 - New Fusarium mycotoxin CRMs - perfect tools for reliable food analysis T2 - 32. Mycotoxin Workshop CY - Copenhagen, Denmark DA - 2010-06-14 PY - 2010 AN - OPUS4-21118 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - Neue Anforderungen an Energiebetriebene Produkte T2 - Workshop der IHK Dresden zur Ökodesignrichtlinie CY - Dresden, Germany DA - 2010-04-13 PY - 2010 AN - OPUS4-21119 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liebner, Christian A1 - Hieronymus, Hartmut A1 - Klemm, E. A1 - Fischer, J. T1 - Sicherheit µ-strukturierter Apparate: Untersuchungsmethoden zur Explosionsausbreitung (Gasphase) T2 - Sitzung des DIN-Arbeitsausschusses "Mikroverfahrenstechnik" CY - Frankfurt am Main, Germany DA - 2010-03-25 PY - 2010 AN - OPUS4-21120 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fischer, J. A1 - Liebner, Christian A1 - Hieronymus, Hartmut A1 - Klemm, E. T1 - Maximum safe diameters of microcapillaries for a stoichiometric ethene/oxygen mixture T2 - IMRET 11, 11th International Conference on Microreaction Technology CY - Kyoto, Japan DA - 2010-03-08 PY - 2010 AN - OPUS4-21121 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Suhendra, Suhendra T1 - Heatpipes: Suitable to Extinguish Coal Fires? T2 - Finale Meeting Sino-German Coal Fire Research Initiative, Phase B CY - Beijing, China DA - 2010-03-24 PY - 2010 AN - OPUS4-21122 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Necessary modifications concerning energetic substances for an amendment of the UN Recommendations on the Transport of Dangerous Goods T2 - IGUS EOS Ad-hoc Meeting "Energetic and Oxidizing Substances" CY - Frankfurt am Main, Germany DA - 2010-02-11 PY - 2010 AN - OPUS4-21123 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krietsch, Arne A1 - Schmidt, Martin T1 - Ignition and Burning Behaviour of Coals, Gas Emissions T2 - Final Meeting Sino-German Coal Fire Research Initiative, Phase B CY - Beijing, China DA - 2010-03-24 PY - 2010 AN - OPUS4-21124 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Scheid, Marc A1 - Böhme, Thilo T1 - STK-Bandbreiten von Stäuben in der GSBL Datenbank: Zielsetzung und Beispiele T2 - ProcessNet Arbeitsausschuss "Sicherheitstechnische Kenngrößen" CY - Frankfurt am Main, Germany DA - 2010-04-13 PY - 2010 AN - OPUS4-21125 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rethmeier, Michael T1 - Makromaterialbearbeitung mit Hochleistungslasern T2 - Seminar "Laser-Materialbearbeitung für die industrielle Fertigung", Photon Laser Engineering, Laser Optics Berlin CY - Berlin, Germany DA - 2010-03-23 PY - 2010 AN - OPUS4-21098 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Vergleich der Materialeigenschaften von Polyethylenformstoffen mit dem Baumusterverhalten von Gefahrgutverpackungen T2 - Seminar: Ausgewählte Kapitel der Sicherheitstechnik/Materialkunde, Werkstoffe und Fertigungstechnik der Bergischen Universität Wuppertal, Fachbereich D, Abt. Maschinenbau CY - Wuppertal, Germany DA - 2010-01-15 PY - 2010 AN - OPUS4-21099 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Datenbank Gefahrgut - aktuelle Funktionalitäten für den Bereich Verpackung sowie geplanter Ausbau T2 - Ausgewählte Kapitel der Sichrheitstechnik/Materialkunde, Werkstoffe und Fertigungstechnik der bergischen Universität Wuppertal, Fachbereich D, Abt. Maschinenbau CY - Wuppertal, Germany DA - 2010-01-15 PY - 2010 AN - OPUS4-21100 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rackwitz, Vanessa A1 - Procop, M. A1 - Hodoroaba, Vasile-Dan T1 - Characterisation of Polycapillary X-Ray Semi-lenses with SEM/EDX T2 - European Conference on X-Ray Spectrometry, EXRS 2010 CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-21102 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gorbushina, Anna T1 - Idealbiofilm als neues Testsystem: Laborsimulation von Umwelteinflüssen und biologischer Einwirkung auf Materialien T2 - 39. Jahrestagung der GUS Gesellschaft für Umweltsimulation e. V. CY - Stutensee, Germany DA - 2010-03-19 PY - 2010 AN - OPUS4-21103 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gorbushina, Anna T1 - Life on the rocks: microscopic landscapes under the influence of microbes and atmosphere T2 - Vortrag CY - Potsdam, Germany DA - 2010-03-10 PY - 2010 AN - OPUS4-21104 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hattermann, Hilke A1 - Griepentrog, Michael A1 - Hübert, Thomas T1 - Nanocomposite sol-gel coatings containing inorganic fullerenes for tribological applications T2 - 2nd International Conference on Functional Nanocoatings CY - Dresden, Germany DA - 2010-03-29 PY - 2010 AN - OPUS4-21105 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gula, Michal A1 - Holtappels, Kai A1 - Acikalin, Hatice Aydan A1 - Grasse, Dennis A1 - Steinbach, J. A1 - Schildberg, H.-P. T1 - Explosion of chemically unstabel gases in large vessels at elevated initial conditions T2 - 13th International Symposium on Loss Prevention and Safety Promotion in the Process Industries CY - Bruges, Belgium DA - 2010-06-06 PY - 2010 AN - OPUS4-21476 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunewald, Thomas A1 - Grätz, Rainer A1 - Welzel, F. A1 - Beyer, M. A1 - Klages, C.-P. T1 - Mechanisch erzeugte Reib- und Schlagfunken im Vergleich T2 - 12. BAM/PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik, BAM CY - Berlin, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-21477 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Poli, Marco A1 - Scheider, Swen A1 - Arndt, Detlef A1 - Grätz, Rainer T1 - Grenzen bei der Auslegung von turbulenten Explosionsdruckentlastungen T2 - 12. BAM/PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik, BAM CY - Berlin, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-21478 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gook, Sergej A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Process stability in the laser-GMA-hybrid girth welding of large-diameter pipes T2 - Stuttgart Laser Technology Forum 2010 CY - Stuttgart, Germany DA - 2010-06-08 PY - 2010 AN - OPUS4-21479 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin A1 - Dey, Anika A1 - Pohl, Rainer T1 - Die Kunst des Prüfens: Wirbelstromprüfung am Schrein der Heiligen Drei Könige T2 - DGZfP-Jahrestagung 2010 Zerstörungsfreie Materialprüfung ZfP in Forschung, Entwicklung und Anwendung CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21480 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trappe, Volker A1 - Grasse, Fabian A1 - Basan, Ricardo T1 - Zustandsüberwachung von Rotorblättern T2 - Vortragseinladung auf der Fachtagung "Rotorblätter von Windenergieanlagen" CY - Essen, Germany DA - 2010-06-14 PY - 2010 AN - OPUS4-21483 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kreutzbruck, Marc A1 - Blome, Mark A1 - Pelkner, Matthias A1 - Reimund, Verena T1 - Flux leakage measurements for defect characterization using a high precision 3-axial GMR magnetic sensor T2 - Sensoren und Messsysteme 2010 CY - Nuremberg, Germany DA - 2010-05-18 PY - 2010 AN - OPUS4-21484 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gross, Thomas T1 - Chemical derivatisation XPS: An inter-laboratory comparison T2 - Kratos 2010 European Surface Analysis Users Meeting CY - Manchester, England DA - 2010-06-21 PY - 2010 AN - OPUS4-21485 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seifert, Alexander T1 - CHEMSAFE 2010 beta - Die neue Version T2 - 12. BAM/PTB-Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-21436 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liebner, Christian A1 - Hieronymus, Hartmut A1 - Fischer, J. A1 - Klemm, E. T1 - Untersuchungen zur Explosionsausbreitung in mikrostrukturierten Reaktoren T2 - 12. BAM/PTB-Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-21437 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sokolowski-Tinten, K. A1 - Barty, A. A1 - Boutet, S. A1 - Shymanovich, U. A1 - Bogan, M. A1 - Marchesini, S. A1 - Hau-Riege, S. A1 - Stojanovic, N. A1 - Bonse, Jörn A1 - Tobey, R. A1 - Ehrke, H. A1 - Cavalleri, A. A1 - Duesterer, S. A1 - Frank, M. A1 - Bajt, S. A1 - Schulz, J. A1 - Seibert, M. A1 - Hajdu, J. A1 - Treusch, R. A1 - Chapman, H. T1 - Short-pulse laser induced transient structure formation and ablation studied with time-resolved coherent XUV-scattering N2 - XUV- and X-ray free-electron-lasers (FEL) combine short wavelength, ultrashort pulse duration, spatial coherence and high intensity. This unique combination of properties opens up new possibilities to study the dynamics of non-reversible phenomena with ultrafast temporal and nano- to atomic-scale spatial resolution. In this contribution we wish to present results of time-resolved experiments performed at the XUV-FEL FLASH (HASYLAB/Hamburg) aimed to investigate the nano-scale structural dynamics of laser-irradiated materials. Thin films and fabricated nano-structures, deposited on Si3N4-membranes, have been excited with ultrashort optical laser pulses. The dynamics of the non-reversible structural evolution of the irradiated samples during laser-induced melting and ablation has been studied in an optical pump - XUV-probe configuration by means of single-shot coherent scattering techniques (i.e. diffraction imaging [1]). In a first set of experiments we investigated the formation of laser induced periodic surface structures (LIPSS) on the surface of thin Si-films (thickness 100 nm). In a simplified view LIPPS are generated as a result of interference between the incident laser pulse and surface scattered waves which leads to a periodically modulated energy deposition. Time-resolved scattering using femtosecond XUV-pulses (with a wavelength of 13.5 nm and 7 nm) allowed us to directly follow LIPSS evolution on an ultrafast time-scale and with better than 40 nm spatial resolution. The observed scattering patterns show almost quantitative agreement with theoretical predictions [2] and reveal that the LIPSS start to form already during the 12 ps pump pulse. In the second set of measurements we studied picosecond and femtosecond laser induced ablation and disintegration of fabricated nano-structures. Correlations of coherent diffraction patterns measured at various time delays to the pattern of the undisturbed object show that order in the structure is progressively lost starting from short length scales. This structural rearrangement progresses at close to the speed of sound in the material. Under certain circumstances (e.g. adequate sampling) it became also possible to reconstruct real-space images of the object as it evolves over time [3]. The possibility of femtosecond single-shot imaging of ultrafast dynamic processes with nanoscale resolution provides yet more details of the physical processes involved. [1] H. N. Chapman et al. Nature Phys. 2, 839 (2006). [2] J. F. Young et al., Phys. Rev. B 27, 1155 (1983). [3] A. Barty et al. Nature Phot. 2, 415 (2008). T2 - Fall meeting of the materials research society 2009 CY - Boston, MA, USA DA - 2009-11-30 KW - Femtosecond laser ablation KW - Laser-induced periodic surface structures KW - Time-resolved coherent XUV scattering KW - Semiconductor KW - Silicon PY - 2010 DO - https://doi.org/10.1557/PROC-1230-MM05-03 N1 - Serientitel: Materials Research Society symposium proceedings – Series title: Materials Research Society symposium proceedings VL - 1230E IS - Paper 1230-MM05-03 SP - 1 EP - 6 AN - OPUS4-21438 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gula, M. A1 - Holtappels, Kai A1 - Acikalin, Hatice Aydan A1 - Grasse, Dennis A1 - Steinbach, J. A1 - Schildberg, H.-P. ED - Suter, G. ED - de Rademaeker, E. T1 - Explosion of chemically unstable gases in large vessels at elevated initial conditions T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 479 EP - 482 CY - Brugge, Belgium AN - OPUS4-21440 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Holtappels, Kai A1 - Schröder, Volkmar A1 - Pekalski, A. A1 - Schildberg, H.-P. A1 - Pasman, H.J. ED - Suter, G. ED - de Rademaeker, E. T1 - Process safety by oxygen monitoring T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 181 EP - 186 CY - Brugge, Belgium AN - OPUS4-21441 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Poli, Marco A1 - Blanchard, Robert A1 - Grätz, Rainer ED - Suter, G. ED - de Rademaeker, E. T1 - Venting of turbulent gas explosions T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - Explosionsdruckentlastung KW - Simulation KW - ANSYS CFX KW - Explosionsschutz KW - Sicherheitstechnik PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 165 EP - 172 CY - Brugge, Belgium AN - OPUS4-21442 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Blanchard, Robert A1 - Poli, Marco A1 - Grätz, Rainer ED - Suter, G. ED - de Rademaeker, E. T1 - Effect of ignition position on the run-up distance to DDT for hydrogen-air explosions T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - Deflagration to detonation transition (DDT) KW - Ignition position KW - Hydrogen PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 157 EP - 164 CY - Brugge, Belgium AN - OPUS4-21443 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Caron, J. A1 - Heinze, Christoph A1 - Schwenk, Christopher A1 - Rethmeier, Michael A1 - Babu, S. S. A1 - Lippold, J. T1 - Effect of continuous cooling transformation variations on numerical calculation of welding-induced residual stresses N2 - Continuous cooling transformation (CCT) behavior affects the transient state of material properties employed in a numerical welding simulation, having a direct influence on the developing stress state. Three different CCT diagrams for S355J2 steel were employed to understand the influence of variations in CCT behavior on the numerical calculation of welding-induced residual stresses. The CCT diagrams were constructed from transformation data contained in the Sysweld software database, measured dilatometric data from Gleeble experiments, and transformation data calculated from the JMatPro software. The calculated transverse and longitudinal residual stress distributions provided a qualitative correction only in comparison to experimental measurements, with the largest deviation occurring near the weld interface. Overall, the results indicate a weak dependency of the calculated residual stresses due to anticipated CCT variations. The most significant effect on the calculated residual stresses was shown to be related to the proportion of formed martensite. It is suggested that CCT data of approximate accuracy is sufficient for reliable calculation of welding-induced residual stresses. KW - Continuous cooling transformation diagrams KW - Residual stresses KW - Gas metal arc welding KW - C-Mn steels KW - Welding simulation KW - Schweißsimulation KW - Eigenspannungen KW - Martensitbildung KW - Sensitivitätsanalyse KW - Sysweld KW - Martensite kinetic KW - Sensitivity analysis PY - 2010 SN - 0043-2296 SN - 0096-7629 VL - 89 SP - 151-s - 160-s PB - American Welding Society CY - New York, NY AN - OPUS4-21444 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Symietz, Christian A1 - Lehmann, Erhard A1 - Gildenhaar, Renate A1 - Krüger, Jörg A1 - Berger, Georg T1 - Femtosecond laser induced fixation of calcium alkali phosphate ceramics on titanium alloy bone implant material N2 - Femtosecond lasers provide a novel method of attaching bioceramic material to a titanium alloy, thereby improving the quality of bone implants. The ultrashort 30 fs laser pulses (790 nm wavelength) penetrate a thin dip-coated layer of fine ceramic powder, while simultaneously melting a surface layer of the underlying metal. The specific adjustment of the laser parameters (pulse energy and number of pulses per spot) avoids unnecessary melting of the bioactive calcium phosphate, and permits a defined thin surface melting of the metal, which in turn is not heated throughout, and therefore maintains its mechanical stability. It is essential to choose laser energy densities that correspond to the interval between the ablation fluences of both materials involved: about 0.1-0.4 J cm-2. In this work, we present the first results of this unusual technique, including laser ablation studies, scanning electron microscopy and optical microscope images, combined with EDX data. KW - Bone implant KW - Bioceramic coating KW - Titanium KW - Calcium phosphate KW - Femtosecond laser PY - 2010 DO - https://doi.org/10.1016/j.actbio.2010.02.016 SN - 1742-7061 VL - 6 IS - 8 SP - 3318 EP - 3324 PB - Elsevier CY - Amsterdam AN - OPUS4-21446 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schwenk, Christopher T1 - Normen und Richtlinien für die numerische Schweißsimulation - Entwicklungsbegleitende Normung (EBN) N2 - Die Schweißsimulation ermöglicht frühzeitige Aussagen über schweißbedingte Phänomene und hilft so, den Entwicklungsprozess zu verbessern. Damit können die Ursachen auftretender Qualitätseinbußen besser identifiziert werden, sodass eine gezielte Vorgehensweise für die Bauteil- und Verfahrensoptimierung möglich wird. Das wirtschaftliche Anwendungspotenzial der Schweißsimulation ist enorm und mit dem der Umformsimulation vergleichbar. Bei unsachgemäßer Anwendung ist das Fehlerpotenzial jedoch sehr hoch, wodurch die Notwendigkeit einer strukturierten und definierten Vorgehensweise verdeutlicht wird. Hiermit werden nicht nur die Zuverlässigkeit und Aussagekraft der Simulationen sichergestellt, sondern auch eine Grundlage zur effektiven Vergleichbarkeit verschiedener Berechnungsprojekte geschaffen. Diese Sicherheit ist sowohl für Auftraggeber als auch für Auftragnehmer wichtig und hilft, die industrielle Anwendung der Schweißsimulation zu unterstützen und ihr Potenzial voll auszuschöpfen. PY - 2010 SN - 0722-2912 SN - 0011-4952 VL - 6 SP - 28 EP - 31 PB - Beuth CY - Berlin AN - OPUS4-21447 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst A1 - Shokouhi, Parisa A1 - Stähler, S. A1 - Nowak, Thomas Rudolf T1 - Detection of Subtle Changes in Materials by Coda Wave Interferometry T2 - 10th European Conference on NDT (ECNDT) CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-21448 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Engelhardt, M. A1 - Weis, H. A1 - Kargl, F. A1 - Griesche, Axel A1 - Yang, F. A1 - Meyer, A. T1 - In-situ studies of inter- and self diffusion in liquid metals T2 - Deutsche Tagung für Forschung mit Synchrotronstrahlung, Neutronen und Ionenstrahlen an Großgeräten (SNI2010) CY - Berlin, Germany DA - 2010-02-24 PY - 2010 AN - OPUS4-21450 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weltschev, Margit A1 - Deuerler, F. ED - Suter, G. ED - de Rademaeker, E. T1 - Comparison of material parameters of polyethylene grades and the test performance behaviour of packagings for the transport of dangerous goods T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - HDPE-Formstoffe KW - Werkstoffkennwerte KW - Spannungsrissbeständigkeit KW - Verpackungen KW - Baumusterprüfung PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 383 EP - 386 CY - Brugge, Belgium AN - OPUS4-21451 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rohrmann, Rolf A1 - Thöns, Sebastian A1 - Rücker, Werner T1 - Integrated monitoring of offshore wind turbines - requirements, concepts and experiences N2 - Wind turbines on offshore sites (OWECs) are subjected to combined loads from wind and waves. These dynamic loads, with a frequency content within the range of the natural frequencies of the structures, cause fatigue-effective stresses in the substructures of wind turbines. Therefore, the examination of natural frequencies is an important part within the design process of wind turbines. The quality of the numerical models for such calculations is of great importance, since the certification guidelines permit only small uncertainties in modal analysis results. The accuracy of the parameters of the numerical model can only be achieved through a comparison of simulation results with corresponding test results. Therefore, it is necessary to measure the dynamic behaviour of all components of the wind turbines simultaneously. This is true not only for the design verification, but also for monitoring the OWECs in operation. The potential of integrated systems for monitoring-based maintenance optimisation should thus be used. KW - Offshore wind turbines KW - Integrated monitoring system KW - Structural assessment KW - Damage indicators KW - Dynamic loads KW - Data management PY - 2010 DO - https://doi.org/10.1080/15732470903068706 SN - 1573-2479 SN - 1744-8980 VL - 6 IS - 5 SP - 575 EP - 591 PB - Taylor & Francis CY - London AN - OPUS4-21452 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bücker, Michael T1 - Kombinierte Behandlung von Holz mit Nanopartikeln T2 - 26. Holzschutz-Tagung CY - Göttingen, Deutschland DA - 2010-04-22 KW - Holzmodifikation KW - Kieselsol KW - Silane KW - Tränkung und Beschichtung KW - Holzfenster PY - 2010 SP - 137 EP - 144 AN - OPUS4-21453 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai A1 - Michael-Schulz, Heike A1 - Wehrstedt, Klaus-Dieter A1 - Schröder, Volkmar T1 - Explosion in einer Erdgasspeicherbohrung T2 - 12. BAM/PTB-Kolloquium zur chemischen und physikalischen Sicherheit, BAM CY - Berlin, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-21454 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Huismann, Sven A1 - Korzen, Manfred A1 - Schneider, U. T1 - A Material Model for the Numerical Simulation of High Strength Concrete Columns Subjected to Fire Loading T2 - Sixth International Conference on Structures in Fire CY - East Lansing, MI, USA DA - 2010-06-02 PY - 2010 AN - OPUS4-21455 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eichler, Thorsten A1 - Isecke, Bernd T1 - Kathodischer Korrosionsschutz von Stahl in Beton - Grundlagen, Planung, Ausführung T2 - Betoninstandsetzungstagung der MPA-Bremen CY - Bremen, Germany DA - 2010-06-17 PY - 2010 AN - OPUS4-21507 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiegner, Katharina T1 - Evaluierung von Alternativbaustoffen für die Herstellung emissionsarmer Museumsvitrinen T2 - 17. Innovationstag Mittelstand des Bundesministeriums für Wirtschaft und Technologie CY - Berlin, Germany DA - 2010-06-17 PY - 2010 AN - OPUS4-21508 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai A1 - Schildberg, H.-P. T1 - The course of explosions of CH4/O2/N2-mixtures in a 20-l-spehre T2 - 13th International Symposium on Loss Prevention and Safety Promotion in the Process Industries CY - Bruges, Belgium DA - 2010-06-06 PY - 2010 AN - OPUS4-21509 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brás, A.R. A1 - Frunza, S. A1 - Guerreiro, L. A1 - Fonseca, I.M. A1 - Corma, A. A1 - Frunza, L. A1 - Dionísio, M. A1 - Schönhals, Andreas T1 - Molecular mobility of nematic E7 confined to molecular sieves with a low filling degree N2 - The nematic liquid crystalline mixture E7 was confined with similar filling degrees to molecular sieves with constant composition but different pore diameters (from 2.8 to 6.8 nm). Fourier transform infrared analysis proved that the E7 molecules interact via the cyanogroup with the pore walls of the molecular sieves. The molecular dynamics of the system was investigated by broadband dielectric spectroscopy (10-2-109 Hz) covering a wide temperature range of ~ 200 K from temperatures well above the isotropic-nematic transition down to the glass transition of bulk E7. A variety of relaxation processes is observed including two modes that are located close to the bulk behavior in its temperature dependence. For all confined samples, two relaxation processes, at frequencies lower than the processes observed for the bulk, were detected. At lower temperatures, their relaxation rates have different temperature dependencies whereas at higher temperatures, they seem to collapse into one chart. The temperature dependence of the slowest process (S-process) obeys the Vogel-Fulcher-Tammann law indicating a glassy dynamics of the E7 molecules anchored to the pore surface. The pore size dependence of both the Vogel temperature and fragility revealed a steplike transition around 4 nm pore size, which indicates a transition from a strong to a fragile behavior. The process with a relaxation rate in between the bulklike and the S-process (I-process) shows no dependence on the pore size. The agreement of the I-process with the behavior of a 5CB surface layer adsorbed on nonporous silica leads to the assignment of E7 molecules anchored at the outer surface of the microcrystals of the molecular sieves. KW - Adsorption KW - Fourier transform spectra KW - Glass transition KW - infrared spectra KW - Molecular sieves KW - Nematic liquid crystals KW - Organic compounds KW - Porous materials PY - 2010 DO - https://doi.org/10.1063/1.3432775 SN - 0021-9606 SN - 1089-7690 VL - 132 SP - 224508-1 - 224508-12 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-21510 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eichler, Thorsten A1 - Isecke, Bernd A1 - Wilsch, Gerd A1 - Goldschmidt, Sebastian A1 - Bruns, M. T1 - Investigations on the chloride migration in consequence of cathodic polarisation N2 - At the Institute for Building Materials Research (ibac) in Aachen and the Federal Institute for Materials Research and Testing (BAM) in Berlin a joint research project is currently running with the aim to develop a numerical model which describes cathodic protection (CP) of reinforced concrete. Special project focus is the CP of the rear reinforcement layer. The resulting model shall include the impact of chemical alterations at the steel surface and within the adjacent concrete on the polarisation behaviour of reinforcement, which are induced by long-term application of CP. The investigations presented in this paper aim to clarify open aspects on the migration of chloride ions due to small electric fields as applied in CP of steel in reinforced concrete structures. A comparatively new method, laser induced breakdown spectroscopy (LIBS), was applied in order to determine chloride concentration profiles on laboratory specimens as one of several model parameters for a mathematical description of CP of the rear reinforcement of reinforced concrete structures. The paper concerns migration tests using non-saturated specimens under laboratory conditions at constant voltage and the application of the experimental parameters on FEM-calculations. The presented results suggest the conclusion that even comparably small electric fields, as applied in CP of steel in concrete, may lead to significant and sustainable reduction in chloride concentration at the surface of the reinforcement. KW - Steel in concrete KW - Cathodic protection KW - Pitting corrosion KW - Mild steel KW - Electrochemical impedance spectroscopy PY - 2010 DO - https://doi.org/10.1002/maco.200905560 SN - 0947-5117 SN - 1521-4176 VL - 61 IS - 6 SP - 512 EP - 517 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-21511 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Epishin, A. A1 - Brückner, Udo A1 - Link, T. A1 - Fedelich, Bernard T1 - X-ray reflections from the Gamma/Gamma'-microstructure of nickel-base superalloys: effect of the plane tilting N2 - The shape of X-ray reflections from the cuboidal γ/γ'-microstructure was investigated. The measurements were performed on the 4th generation single-crystal nickel-base superalloy TMS138. It is shown that reflections from non-cubic crystallographic planes split not only in d-scale due to the different spacing of the γ- and γ'-lattices but also in the pole figure due to the tilting of γ-lattice planes. This tilting results from the elastic distortion of the γ-lattice caused by the γ/γ'-misfit. The results obtained are discussed under the methodical aspect of misfit measurement. KW - Nickel-base alloys KW - X-ray diffraction KW - Lattice distortion PY - 2010 DO - https://doi.org/10.3139/146.110315 SN - 1862-5282 VL - 101 IS - 5 SP - 589 EP - 593 PB - Carl Hanser CY - München AN - OPUS4-21512 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pistol, Klaus A1 - Weise, Frank T1 - Novel investigation of the behaviour of Polypropylene fibres in high strength concrete at high temperatures T2 - 8th fib PhD Symposium CY - Kongens Lyngby, Denmark DA - 2010-06-20 PY - 2010 AN - OPUS4-21513 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Voland, Katja A1 - Weise, Frank T1 - Application of Innovative Measurement Techniques for Monitoring of ASR Induced Damage Processes in Concrete T2 - 8th fib PhD Symposium CY - Kongens Lyngby, Denmark DA - 2010-06-20 PY - 2010 AN - OPUS4-21514 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Balke, Christian T1 - Tanklagerbrand in Buncefield KAS-Abschlussbericht T2 - ERFA Behörden, BAM CY - Berlin, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21456 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Balke, Christian A1 - Schendler, Thomas T1 - Lernen aus Fehlern - Die Ereignisauswertung bei der KAS T2 - Sicherheitstechnischer Erfahrungsaustausch für Sachverständige nach § 29a BImSchG CY - Karlsruhe, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-21457 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zur, Malte A1 - Otremba, Frank T1 - Numerische und experimentelle Untersuchungen der Luftströmungen im Frachtcompartment von Verkehrsflugzeugen T2 - Sitzung des Beirates Werkstoffe und technische Systeme, BAM CY - Berlin, Germany DA - 2010-06-08 PY - 2010 AN - OPUS4-21458 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kus, J. A1 - Kaufhold, S. A1 - Klosa, D. A1 - Jianwei, M. A1 - Schmidt, Martin A1 - Suhendra, Suhendra T1 - Coal fire geothermometer: Controlling the extent and temperature field of underground coal fire zones T2 - 2nd International conference on coal fire research (ICCFR2) CY - Berlin, Germany DA - 2010-05-19 KW - Coal fires KW - Coal petrography KW - Coal mineralogy PY - 2010 SN - 978-3-86012-397-3 IS - Part 2 - Geosciences SP - 75 EP - 85 AN - OPUS4-21459 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fischer, C. A1 - Wu, J. A1 - Meyer, U. A1 - Kong, B. A1 - Schmidt, Martin A1 - Wuttke, M. A1 - Drebenstedt, C. A1 - Barth, Uli A1 - Rüter, H. T1 - Eight years of successful bilateral cooperation: Milestones of sino-german research T2 - 2nd International conference on coal fire research (ICCFR2) CY - Berlin, Germany DA - 2010-05-19 KW - Underground coal fires KW - Sino-german cooperation PY - 2010 SN - 978-3-86012-397-3 IS - Introduction SP - 3 EP - 18 AN - OPUS4-21460 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krietsch, Arne A1 - Schmidt, Martin A1 - Suhendra, Suhendra A1 - Helmis, Mario T1 - Laboratory investigations on the ignition and burning process of coal: Fire characteristics and gas emissions T2 - 2nd International conference on coal fire research (ICCFR2) CY - Berlin, Germany DA - 2010-05-19 KW - Spontaneous combustions KW - Coal fires KW - Gas emissions KW - Fire propagation PY - 2010 SN - 978-3-86012-397-3 SP - 147 EP - 152 AN - OPUS4-21461 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Martin A1 - Suhendra, Suhendra A1 - Rüter, H. T1 - Heat pipes - Suitable for extinguishing underground coal fires? T2 - 2nd International conference on coal fire research (ICCFR2) CY - Berlin, Germany DA - 2010-05-19 KW - Coal fires KW - Fire fighting KW - Heat pipes PY - 2010 SN - 978-3-86012-397-3 SP - 433 EP - 437 AN - OPUS4-21462 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hauer, B. A1 - Rübner, Katrin A1 - Herbst, Tristan A1 - Schäfer, S. A1 - Seidel, M. T1 - B - Potentials for the use of secondary materials in concrete construction / B - Potenziale des Sekundärstoffeinsatzes im Betonbau KW - Nachhaltig mit Beton bauen KW - Einsatzpotenziale Sekundärrohstoffe KW - Müllverbrennungsaschen KW - Brechsande PY - 2010 SN - 0373-4331 SN - 1865-6528 N1 - Sprachen: Deutsch/Englisch - Languages: German/English VL - 76 IS - 02 SP - 18 EP - 19 PB - Bauverl. CY - Gütersloh AN - OPUS4-21463 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Müller, Bernd R. T1 - Improved computed tomography by variable desmearing - Model reconstructions by iterative DIRECTT algorithm N2 - Die mitunter erhebliche Verschmierung von computertomograpischen Projektionen durch ausgedehnte Strahlenquellen wird durch eine neuartige Entschmierungsprozedur erheblich reduziert, um eine verbesserte Ortsauflösung der Rekonstruktion zu erreichen. Da die Breite der Verschmierungsfunktion der detektornahen und -fernen Objektelemente sich erheblich unterscheiden kann, muss die Entschmierung variabel sein. Im Gegensatz zu einer für alle Voxel-Positionen identischen Entfaltung, also einer grundsätzlich falschen Voraussetzung, wurde eine implizite Entschmierung entwickelt. Die vorab bekannte positionsabhängige Verschmierung wird auf die iterativ wiederholten Projektionen der Teilrekonstruktionen des DIRECTT-Algorithmus angewandt. Die variabel entschmierten Rekonstruktionen aus den Sinogrammen eines Pixelmodells mit Verschmierungen von 1 bis 5 Pixel erreichen eine Ortsauflösung von nahezu einem Pixel. KW - Computertomographie KW - Neutronen-Tomographie KW - Tomographische Rekonstruktionsalgorithmen PY - 2010 SN - 0025-5300 VL - 52 IS - 6 SP - 394 EP - 400 PB - Hanser CY - München AN - OPUS4-21464 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ewers, Benjamin A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. T1 - Terahertz spectral imaging techniques in NDT: Topography and computed tomography N2 - The emerging technology of generation and detection of Terahertz waves (1 THz = 1012 Hz) offers diverse potentials in non-destructive testing (NDT) regarding security as well as safety aspects. Herein, we focus on the latter with emphasis on imaging techniques. The THz range (0.1 … 10 THz, 3mm …30 µm) closes the technological gap between ultra high frequency electronics and FIR optics in the electro-magnetic (EM) spectrum. Electro-optical sampling provides straight access to the EM wave including its phase (rather than intensity). THz waves are well suited to characterize non-metallic materials since they penetrate paper, plastics, ceramics and certain composites (e.g. GFC). We employ a commercial fibre-coupled THz time domain spectrometer (TDS) for scanning the samples laterally through a focal spot. At each position the entire temporal pulse train is recorded, which offers the opportunity to use various parameters derivable for imaging. Topographic measurements are performed as reflection set-up. The achievable spatial resolution is diffraction limited at about 100 µm -300 µm (which allows for perception of single defects on a sub-mm scale). In contrast to typical pulse echoed ultrasound testing THz topography is a non-contact inspection tool without coupling agents. Several reflections of subsequent concealed layers are detected instead of just the first encountered one. Comparing to X-ray (radiology) the non-ionizing THz-waves generate images of similar contrast regarding metal and plastic (organic) components, while conventional radiography emphasizes one type of material depending on the energy preselected. Moreover, the full temporal information is exploited to derive spectra in certain selected time windows, i.e. separated spectral properties of each layer in multilayered structures. Tomographic measurements are performed in transmission mode. The sample is mounted on a rotation stage in order to allow for lateral scanning under the different projection angles. The reconstruction is typically performed by filtered backprojection, which is widely used for X-ray CT. The adaption of this technique to the THz range comes along with several experimental drawbacks such as considerable refraction and scattering. According to these difficulties we investigate the occurring artefacts. The THz-TDS provides the opportunity to calculate a separate backprojection of each frequency interval as obtained by the Fourier transformation of the recorded time resolved amplitude. This results in a spectrally resolved reconstruction of each voxel, which is unique in computed tomography technology. T2 - 10th European conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 KW - Terahertz time domain spectroscopy KW - Spectral computed tomography KW - 3D topography PY - 2010 UR - http://www.ndt.net/article/ecndt2010/reports/1_09_10.pdf IS - Paper 4.02.18 SP - 1 EP - 10(?) AN - OPUS4-21465 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Liebner, Christian A1 - Fischer, J. A1 - Hieronymus, Hartmut A1 - Klemm, E. ED - Suter, G. ED - de Rademaeker, E. T1 - Are micro reactors inherently safe? - An investigation of gas phase explosion propagation limits T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - Deflagration KW - Detonation KW - Mikroreaktionstechnik KW - Mikroreaktoren KW - Sicherheitstechnik PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 281 EP - 285 CY - Brugge, Belgium AN - OPUS4-21496 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Poli, Marco A1 - Arndt, Detlef A1 - Scheider, Swen A1 - Grätz, Rainer T1 - Grenzen bei der Auslegung von turbulenten Explosionsdruckentlastungen T2 - 12. Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Deutschland DA - 2010-06-15 KW - Explosionsdruckentlastung KW - Turbulente Verbrennung KW - Explosionsschutz PY - 2010 SN - 978-3-9813550-1-7 SN - 0938-5533 SP - 19 EP - 22 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-21497 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dietrich, Paul A1 - Graf, Nora A1 - Gross, Thomas A1 - Lippitz, Andreas A1 - Krakert, S. A1 - Schüpbach, B. A1 - Terfort, A. A1 - Unger, Wolfgang T1 - Amine species on self-assembled monolayers of omega-aminothiolates on gold as identified by XPS and NEXAFS spectroscopy N2 - Functionalised surfaces are of interest in many fields, e.g. in biomedicine, materials science and molecular electronics. In this study a series of self-assembled aliphatic and aromatic monolayers on gold substrates with terminal amino groups was investigated. Four different thiol molecules were used: aliphatic 11-aminoundecane-1-thiol (AUDT), aromatic 4-aminobenzenethiol (ABT) and aromatic ω-amino thiols with an alkyl spacer as 4-aminophenylbutane-1-thiol (APBT) and 3-(4''-amino-1,1':4',1''-terphenyl-4-yl)propane-1-thiol (ATPT). Evaluation of N 1s XPS data revealed that on the aromatic self-assembled monolayers (SAMs) amino groups exist preferentially as primary amines, whereas on the aliphatic SAM protonated and/or hydrogen-bonded amines are the major species. This result is crosschecked by N K edge near edge X-ray absorption fine structure (NEXAFS) spectroscopy and can be rationalised by the different basicity of aliphatic and aromatic amines. KW - Self-assembled monolayer KW - Amines KW - XPS KW - NEXAFS KW - Surface analysis PY - 2010 DO - https://doi.org/10.1002/sia.3224 SN - 0142-2421 SN - 1096-9918 VL - 42 SP - 1184 EP - 1187 PB - Wiley CY - Chichester AN - OPUS4-21498 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Huismann, Sven A1 - Weise, Frank A1 - Meng, Birgit A1 - Schneider, U. T1 - Influence of Polypropylene Fibres on the Thermal Strain of High Strength Concrete at High Temperatures T2 - Sixth International Conference on Structures in Fire CY - East Lansing, MI, USA DA - 2010-06-02 PY - 2010 AN - OPUS4-21499 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dietrich, Paul A1 - Horlacher, T. A1 - Gross, Thomas A1 - Wirth, Thomas A1 - Castelli, R. A1 - Shard, A.G. A1 - Alexander, M. A1 - Seeberger, P.H. A1 - Unger, Wolfgang T1 - Surface analytical characterization of carbohydrate microarrays N2 - Microarrays are a versatile platform for diagnostics and high-throughput analysis. Carbohydrate microarrays are valuable tools to investigate interactions with other molecules since many glycans are involved in fundamental biological processes. A combined X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) surface analysis was used to investigate the basic steps in the production of carbohydrate microarrays. The preparation included coupling of a thiol-terminated mannoside to maleimide-functionalized glass surfaces derived from γ-aminopropyl silane (GAPS) slides. XPS results clearly demonstrate successful chemical modification in each fabrication step, and ToF-SIMS imaging revealed immobilized carbohydrates in the spotted regions of the final microarray. KW - Carbohydrates KW - Microarrays KW - XPS KW - ToF-SIMS KW - Nona-mannoside KW - Maleimide surfaces KW - Surface analysis PY - 2010 DO - https://doi.org/10.1002/sia.3255 SN - 0142-2421 SN - 1096-9918 VL - 42 SP - 1188 EP - 1192 PB - Wiley CY - Chichester AN - OPUS4-21500 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kannengießer, Thomas A1 - Lausch, Thomas T1 - Einfluss der Wäremführung auf die Spannungsausbildung beim Schweißen hochfester Stähle unter definierten Einspannbedingungen T2 - FOSTA - Forschungsvereinigung Stahlanwendung e. V., ZMB - Zentrum Metallische Bauweisen CY - Aachen, Germany DA - 2010-04-29 PY - 2010 AN - OPUS4-21501 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heyn, Andreas T1 - Bewertung neuer Korrosionsschutzkonzepte T2 - AG "Electrochemical Properties of Functional Materials" am IFW Dresden CY - Dresden, Germany DA - 2010-07-06 PY - 2010 AN - OPUS4-21503 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wolff, Timo A1 - Hahn, Oliver A1 - Kannengießer, Thomas A1 - Malzer, W. A1 - Mantouvalou, I. T1 - A new fundamental parameter based quantification procedure for micro-XRF data T2 - European Conference on X-Ray Spectrometry (EXRS) CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-21504 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Kupsch, Andreas T1 - Enhanced spatial resolution using iterative focal desmearing in computed tomography N2 - Computed tomography reconstructions of projected data usually assume an ideal point-like focal spot. However, in practice, the actual finite focus size leads to blurred projections, unavoidably. The elements (voxels) of the reconstruction array are smeared differently as a function of their individual position relative to source and detector. Neglecting the focal smearing generates considerably blurred reconstructions. Previous attempts were based on directly deconvolving blurred projections from a constant kernel, which yields better results but still exhibits artefacts. Iterative algorithms can be adopted to take into account focal smearing as a function of position. However, this requires detailed prior knowledge of quantitative smear functions. The DIRECTT (Direct Iterative Reconstruction of Computed Tomography Trajectories) algorithm is a promising candidate to meet these requirements. It has been demonstrated elsewhere that DIRECTT copes with limited data sets such as limited view and region-of- interest data by tracing single sinusoidal-like trajectories in Radon space, which are selected from the set of all possible trajectories by appropriate criteria. Currently, position-dependent smearing is used in the projection part of iterations. At the example of model reconstructions we demonstrate the gain of spatial resolution by iterative variable desmearing according to the DIRECTT algorithm in comparison to the standard filtered back-projection. T2 - 10th European conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 KW - Computed tomography KW - Spatial reslution KW - Reconstruction algorithm KW - Focal smearing PY - 2010 UR - http://www.ndt.net/article/ecndt2010/reports/1_09_18.pdf IS - Paper 4.02.18 SP - 1 EP - 9(?) AN - OPUS4-21466 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Michael-Schulz, Heike A1 - Holtappels, Kai A1 - Wehrstedt, Klaus-Dieter A1 - Schröder, Volkmar T1 - Explosion in einer Erdgasspeicherbohrung T2 - 12. Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Deutschland DA - 2010-06-15 KW - Erdgas KW - Wasserstoffperoxid KW - Speicherbohrung KW - Reinigungsverfahren PY - 2010 SN - 978-3-9813550-1-7 SN - 0938-5533 SP - 15 EP - 18 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-21467 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst A1 - Shokouhi, Parisa A1 - Stähler, S. A1 - Nowak, Thomas Rudolf T1 - Detection of subtle changes in materials by Coda Wave interferometry T2 - 10th European conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 KW - Cold wave interferometry KW - Beton KW - Concrete KW - Stress PY - 2010 IS - Paper 4.02.18 SP - 1 EP - 9 AN - OPUS4-21468 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schwenk, Christopher T1 - Fügetechnik am IPK und der BAM T2 - Kolloquium "Synergie von Werkstoff- und Prozesstechnik" CY - Berlin, Germany DA - 2010-06-04 PY - 2010 AN - OPUS4-21469 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Schmidtchen, Ulrich A1 - Holtappels, Kai A1 - Hensel, Christina T1 - Experimentelle und numerische Untersuchung des Verhaltens von Acetylenflaschen im Feuer T2 - 12. BAM/PTB-Kolloquium zur chemischen und physikalischen Sicherheit, BAM CY - Berlin, Germany DA - 2010-06-15 PY - 2010 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. AN - OPUS4-21470 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Poli, Marco A1 - Scheider, Swen A1 - Arndt, Detlef A1 - Grätz, Rainer T1 - Grenzen bei der Auslegung von turbulenten Explosionsdruckentlastungen T2 - 12. BAM/PTB-Kolloquium zur chemischen und physikalischen Sicherheit, BAM CY - Berlin, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-21471 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai A1 - Schröder, Volkmar A1 - Pekalski, A. A1 - Schildberg, H.-P. A1 - Pasman, H.J. T1 - Process Safety by Oxygen Monitoring T2 - 13th International Symposium on Loss Prevention and Safety Promotion in the Process Industries CY - Bruges, Belgium DA - 2010-06-06 PY - 2010 AN - OPUS4-21475 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mix, Renate A1 - Friedrich, Jörg F. A1 - Yin, Huajie A1 - Rau, A. T1 - Abscheidung dünner haftvermittelnder Polymerschichten mittels Barriereentladung T2 - 5. Workshop Anwenderkreis Atmosphärendruckplasma CY - Potsdam, Germany DA - 2010-06-09 PY - 2010 AN - OPUS4-21486 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Ferrero, Fabio A1 - Malow, Marcus A1 - Krause, Heike T1 - Vorhersage von Selbstentzündungsvorgängen in Brennstofflagern mit Hilfe numerischer Simulationsrechnungen T2 - 12. BAM/PTB-Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-21487 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Schmidtchen, Ulrich A1 - Pahl, Robert A1 - Noack, Jennifer A1 - Kolvitz, Kristian A1 - Runge, Thomas A1 - Holtappels, Kai A1 - Hensel, Christina A1 - Bönig, Jürgen A1 - Schulze, Uwe A1 - Askar, Enis A1 - Frank, M. A1 - Thornton, D. T1 - Experimentelle und numerische Untersuchungen des Verhaltens von Acetylenflaschen im Feuer T2 - 12. Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Deutschland DA - 2010-06-15 KW - Acetylendruckgasbehälter KW - Unterfeuerung KW - Aufheizverhalten KW - CFD-Modellierung PY - 2010 SN - 978-3-9813550-1-7 SN - 0938-5533 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. SP - 70 EP - 72 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-21488 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Krause, Heike A1 - Schröder, Volkmar ED - Suter, G. ED - de Rademaeker, E. T1 - Study of the explosive decomposition of tetrafluoroethylene in a partially heated pipe T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - Unstable gases KW - TFE KW - Decomposition KW - Pipes PY - 2010 SN - 978-90-76019-291 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. VL - 02 SP - 415 EP - 418 CY - Brugge, Belgium AN - OPUS4-21489 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lang, Cindy A1 - Hübert, Thomas A1 - Quaas, H. A1 - Linke, M. T1 - On-line measurement of humidity in the agri-food chain KW - Sensor KW - Monitoring KW - Climatic conditions PY - 2010 SN - 978-90-66052-06-2 SN - 0567-7572 N1 - Serientitel: Acta Horticulturae – Series title: Acta Horticulturae VL - 858 SP - 413 EP - 417 AN - OPUS4-21490 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schildberg, H.-P. A1 - Holtappels, Kai ED - Suter, G. ED - de Rademaeker, E. T1 - The course of explosions of CH4/O2/N2-mixtures in a 20 l sphere T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - Deflagration KW - Detonation KW - Explosion regions PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 475 EP - 478 CY - Brugge, Belgium AN - OPUS4-21491 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wilrich, Cordula A1 - Wehrstedt, Klaus-Dieter T1 - Examples for the influence of non-intrinsic properties on the classification of physical hazards according to the UN-GHS T2 - 13th International Symposium on Loss Prevention and Safety Promotion in the Process Industry CY - Bruges, Belgium DA - 2010-06-06 PY - 2010 AN - OPUS4-21492 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Chemiluminescence for the early detection of weathering effects of coatings - Part I: Fundamentals KW - Chemiluminescence KW - Weathering KW - Polymer KW - Oxidation PY - 2010 SN - 1547-0083 VL - 7 IS - 4 SP - 66 EP - 71 PB - Federation of Societies for Coatings Technology CY - Blue Bell, Pa. AN - OPUS4-21493 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Chemiluminescence for the early detection of weathering effects of coatings - Part II: Experimental set-up and examination KW - Chemiluminescence KW - Weathering KW - Polymer KW - Oxidation PY - 2010 SN - 1547-0083 VL - 7 IS - 5 SP - 38 EP - 44 PB - Federation of Societies for Coatings Technology CY - Blue Bell, Pa. AN - OPUS4-21494 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Liebner, Christian A1 - Hieronymus, Hartmut A1 - Fischer, J. A1 - Klemm, E. T1 - Untersuchungen zur Explosionsausbreitung in mikrostrukturierten Reaktoren T2 - 12. Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Deutschland DA - 2010-06-15 KW - Deflagration KW - Detonation KW - Mikroreaktionstechnik KW - Mikroreaktor KW - Sicherheitstechnik PY - 2010 SN - 978-3-9813550-1-7 SN - 0938-5533 SP - 7 EP - 10 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-21495 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hauswaldt, Sebastian A1 - Korzen, Manfred T1 - A Constitutive Model for Use in Finite Element Simulations in Structural Fire Design T2 - 11th International Symposium on Fire Protection CY - Leipzig, Germany DA - 2010-06-08 PY - 2010 AN - OPUS4-21428 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Berger, Anka A1 - Gude, Nicolas Johannes A1 - Krause, Ulrich T1 - Thermoanalytical investigations during a car fire T2 - Joint Symposium on Thermal Analysis and Calorimetry CY - Dresden, Germany DA - 2010-05-26 PY - 2010 AN - OPUS4-21429 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maskos, Michael T1 - Degradation of Polymers at BAM Federal Institute for Materials Research and Testing, Berlin T2 - 459th WE-Heraeus-Seminar CY - Bad Honnef, Germany DA - 2010-05-30 PY - 2010 AN - OPUS4-21432 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bücker, Michael T1 - Kombinierte Behandlung von Holz mit Nanopartikeln T2 - 26. Holzschutztagung CY - Göttingen, Germany DA - 2010-04-22 PY - 2010 AN - OPUS4-21433 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter A1 - Schönbucher, A. T1 - Characterization of large pool fires of organic compounds containing oxygen atoms T2 - 13th International Symposium on Loss Prevention and Safety Promotion in the Process Industries CY - Bruges, Belgium DA - 2010-06-06 PY - 2010 AN - OPUS4-21435 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kuhlich, Paul A1 - Piechotta, Christian A1 - Nehls, Irene T1 - New disinfection by-products of musk fragrance AHTN T2 - Umwelt 2010 - Von der Erkenntnis zur Entscheidung CY - Dessau-Roßlau, Germany DA - 2010-09-06 PY - 2010 AN - OPUS4-21889 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Saiter, A. A1 - Delbreilh, L. A1 - Couderc, H. A1 - Arabeche, K. A1 - Dantras, E. A1 - Schönhals, Andreas A1 - Grenet, J. T1 - Characteristic Cooperativity Lenght Evolution in Function of Temperature: Study of different Glassformers T2 - 10th European Symposium on Thermal Analysis and Calorimetry CY - Rotterdam, Netherlands DA - 2010-08-22 PY - 2010 AN - OPUS4-21891 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Purohit, Purv A1 - Schönhals, Andreas T1 - Structural Investigation of Nanocomposites based on Poly(methyl methacrylate) and Polyhedral Oligomeric Silsesquioxones T2 - 6th International Conference on Broadband Dielectric Spectroscopy and its Applications CY - Madrid, Spain DA - 2010-09-07 PY - 2010 AN - OPUS4-21892 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Burkert, Annette A1 - Lehmann, Jens T1 - Legierungsgehalt oder Oberfläche - Was bestimmt die Beständigkeit nichtrostender Stähle? T2 - Praxistag Werkstoffe, Netzwerk - Werkstoffkompetenz in NRW CY - Siegen, Germany DA - 2010-09-21 PY - 2010 AN - OPUS4-21893 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ebell, Gino A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Auswirkungen des Einsatzes chromatreduzierter Zemente in Verbindung mit verzinktem Stahl T2 - Forschungsbeiratssitzung des GAV CY - Darmstadt, Germany DA - 2010-09-21 PY - 2010 AN - OPUS4-21894 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Verfleckungen auf nichtrostenden Edelstählen T2 - Seminar DVS Bezirksverband Hannover CY - Hanover, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-21895 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stößer, R. A1 - Menzel, Michael A1 - Feist, M. A1 - Nofz, Marianne A1 - Renz, F. T1 - Competing redox reactions in Fe-containing AlO(OH) and Al2O3 matrices: A combined investigation by Mössbauer, ESR spectroscopy and thermal analysis N2 - The investigation of iron-doped AlO(OH)/Al2O3 systems revealed that the combined employment of Mössbauer and ESR spectroscopies together with thermal analysis yields meaningful data with complementary information. This mutual complementarity is based on the coexistence of Fe point defects with the corresponding aggregated FeOx species which has been observed even for very low Fe concentrations. Competing redox processes between the dopant, the AlOx matrix, and the gas atmosphere during the thermal treatment enable the generation of solid phases exhibiting specific chemical properties. The entire reaction process is influenced by a specific mechanical and thermal pre-treatment that affects predominantly oxydative processes in the matrix. A protecting influence of the matrix preventing further reductive attack of the Fe3+ Fe2+ ions by hydrogen has been established. KW - Mössbauer KW - ESR spectroscopy KW - Thermal analysis KW - Al2O3 KW - Magnetite KW - Fe(0) KW - Fe(2+) KW - Fe(3+) PY - 2010 UR - http://iopscience.iop.org/1742-6596/217/1/012028/pdf/1742-6596_217_1_012028.pdf DO - https://doi.org/10.1088/1742-6596/217/1/012028 SN - 1742-6588 SN - 1742-6596 VL - 217 IS - 1 SP - 012028-1 - 012028-5 PB - IOP Publ. CY - Bristol, UK AN - OPUS4-21876 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völz, Uwe A1 - Mrasek, Heinz T1 - Vergleich von Modellrechnung und Schallfeldmessung an Gruppenstrahlerprüfköpfen N2 - Die Modellierung von Schallausbreitungsvorgängen ist eine notwendige Grundlage für die Optimierung von Prüfparametern bei der zerstörungsfreien Prüfung mit Ultraschall. Das gilt insbesondere bei der Anwendung der Gruppenstrahlertechnik. Außerdem besteht vielfach der Wunsch, die komplexen physikalischen Effekte bei der Schallausbreitung in Festkörpern anschaulich darzustellen. Als Modell dient eine vollständige mathematische Beschreibung einer Punktquelle an der Oberfläche eines isotropen Halbraumes bei impulsförmiger Anregung. Ein Ansatz für die Erweiterung auf transversalisotrope Medien ist vorhanden. Die Berechnung der Schallfelder von ausgedehnten Schwingern und Schwingersystemen, wie bei einem Gruppenstrahler-Prüfkopf, erfolgt durch Überlagerung der Felder mehrerer Punktquellen mit der so genannten Punktquellensynthese. Zur Verifizierung der Modellrechnungen wird ein Verfahren zur Schallfeldmessung verwendet, das sich durch seine einfache Handhabung und einen hohen Signal-Rausch-Abstand auszeichnet. Dabei wird das streifende Schallfeld an der Oberfläche von Festkörpern mit einer elektrodynamischen Sonde als Amplituden- Zeit-Funktion der parallel zur Oberfläche orientierten Teilchenverschiebung aufgezeichnet. Durch entsprechende Aufbereitung der Messdaten kann so der zeitliche Verlauf der Wellenfronten sichtbar gemacht werden. An mehreren Beispielen werden gerechnete Simulationsergebnisse mit gemessenen Schallfeldverläufen von Gruppenstrahler-Prüfköpfen in Festkörpern verglichen. Daran kann zum einen gezeigt werden, dass die eingesetzte Methode zur Messung und Visualisierung von Schallfeldern an der Oberfläche von Festkörpern sehr anschauliche Darstellungen der Ultraschallausbreitung ermöglicht. Zum anderen ist erkennbar, dass mit dem hier verwendeten Punktquellenmodell der Verlauf von Schallfeldern mit qualitativ guter Übereinstimmung zu den Messdaten berechnet werden kann. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Ultraschall KW - Schallfeld KW - Elektrodynamische Sonde KW - Visualisierung KW - Modellierung KW - Punktquellensynthese PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Di.1.B.3) SP - 1 EP - 8 CY - Berlin AN - OPUS4-21877 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schenk, Gottfried A1 - Brackrock, Daniel A1 - Boehm, Rainer A1 - Kreutzbruck, Marc A1 - Deutsch, W.A.K. A1 - Joswig, M. A1 - Maxam, K. A1 - Schuster, V. T1 - Untersuchungen zum Einfluss von Geometrie- und Temperaturabweichungen bei der Stangenprüfung mit Ultraschall-Gruppenstrahlertechnik N2 - Bei der automatisierten Prüfung von Stangen mit Ultraschall- Gruppenstrahlertechnik besteht grundsätzlich die Möglichkeit, Prüfkopfparameter wie Einschallwinkel, Fokustiefe und Schallbündelbreite programmgesteuert an sich verändernde Prüfbedingungen anzupassen. Zu diesen zählt die Temperatur des Koppelmediums (Wasser), die in einem Bereich von 10°C bis 50°C liegen kann, was zu unterschiedlichen Schallgeschwindigkeiten führt und den Einschallwinkel verändert. Mit der Folge, dass unter Umständen die geforderte 100%-Abdeckung des Prüfvolumens nicht mehr gewährleistet ist. Auch geometrische Abweichungen, wie sie durch die fertigungsbedingte Streuung des Prüflings gegeben sind, können Einfluss auf das Prüfergebnis nehmen. So führen Abweichungen vom idealen Geradheitszustand zu Fehlpositionierungen des Prüfkopfs, was wiederum Einfluss auf die Lage und Beschaffenheit des Schallbündels in der Stange hat. Ähnliches gilt für nicht vollkommen kreisförmig ausgebildete Stangendurchmesser, die unterschiedliche Schalleintrittsbedingungen bewirken und Abweichungen von den theoretisch ermittelten Werten zur Folge haben. Im Rahmen eines vom BMWi geförderten Forschungsvorhabens wurde der Einfluss dieser Parameter untersucht und ihre Auswirkungen für den Betrieb einer automatisierten Prüfanlage unter realen Betriebsbedingungen ermittelt. Dies betrifft vor allem den maximal möglichen Schallbündelversatz innerhalb des Arrays, der die Anzahl der erforderlichen Prüftakte bestimmt und damit die maximale Vorschubgeschwindigkeit des Prüflings. Des Weiteren werden Möglichkeiten zur programmgesteuerten Kompensation der untersuchten Temperatur- und Geometrieabweichungen durch eine flexible Anpassung der Gruppenstrahler- Prüfkopfparameter aufgezeigt. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Mi.4.A.1) SP - 1 EP - 8 CY - Berlin AN - OPUS4-21878 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - The interface strength - key to physically based failure criterion for composites T2 - IIMM 2010 Conference, Interfaces and Interphases in Multicomponent Materials CY - Sheffield, England DA - 2010-09-01 PY - 2010 AN - OPUS4-21879 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kitze, Jessica A1 - Brackrock, Daniel A1 - Brekow, Gerhard A1 - Prager, Jens A1 - Gaal, Mate A1 - Kreutzbruck, Marc A1 - Szabo, D. A1 - Kuti, K. A1 - Paczolay, G. T1 - SAFT und TOFD - Ein Vergleich im Analyseverhalten von Reflektoren N2 - Mit der Gruppenstrahlertechnik der Bundesanstalt für Materialforschung und -prüfung sind umfangreiche Untersuchungen an einer plattierten Druckbehälter-Testwand durchgeführt worden. In der vorliegenden Testwand mit einer Wanddicke von 149 mm befinden sich künstliche Testreflektoren im Schweißnaht- und Plattierungsbereich, die mit Gruppenstrahler- Prüfköpfen mit unterschiedlichen Frequenzen, Einschallwinkeln und Einschallrichtungen nachgewiesen und in ihrem Anzeigenverhalten analysiert wurden. Zur Rekonstruktion der Reflektoranzeigen wurde ein SAFT - Algorithmus verwendet, der die Variation der Einschallwinkel berücksichtigt. Zum Vergleich sind die Reflektoren auch mit der TOFD - Technik analysiert worden. Ziel der Untersuchungen war der direkte Vergleich der Eignung der SAFT- und TOFDTechnik zur quantitativen Reflektorgrößenbestimmung. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Mi.2.A.3) SP - 1 EP - 11 CY - Berlin AN - OPUS4-21880 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pelkner, Matthias A1 - Reimund, Verena A1 - Blome, Mark A1 - Thomas, Hans-Martin A1 - Kreutzbruck, Marc T1 - 3D-GMR-Messung an Referenzbauteilen und Rekonstruktion der Rissparameter N2 - Zunehmend werden hochpräzise Magnetfeldsensoren in der Materialprüfung verwendet. Aus dem Zoo der Magnetfeldsensoren eignen sich GMR-Sensoren (Giant Magneto Resistance) aufgrund ihrer hohen Feld- Empfindlichkeit, ihrem hohen Signal-Rausch-Verhältnis sowie ihrer kleinen Sensorflächen (verbunden mit einer hohen Ortsauflösung) hierfür im Besonderen. Mit GMR-Sensoren wurden Risse untersucht und konnten mit einer Tiefe ≤ 50 µm noch mit einem guten Signal-Rausch-Verhältnis aufgelöst werden. Die an Prüfkörpern mit künstlich eingebrachten Defekten gemessenen Streufeldsignale wurden anhand von analytischen Lösungen verifiziert. Anhand der analytischen Lösungen wurden auch Defektparameter zu den aufgezeichneten Signalen rekonstruiert. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Mo.3.A.4) SP - 1 EP - 9 CY - Berlin AN - OPUS4-21881 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin A1 - Dey, Anika A1 - Pohl, Rainer T1 - Die Kunst des Prüfens: Wirbelstromprüfung am Schrein der Heiligen Drei Könige im Kölner Dom N2 - Der Schrein der Heiligen Drei Könige im Kölner Dom ist einer der bedeutendsten Goldschmiedearbeiten des Mittelalters in Europa. Der Schrein übertrifft heute mit seiner Größe und künstlerischen Qualität alle noch erhaltenen Reliquiare des Mittelalters. Diese kunstvoll verkleidete Truhe (2,10 Meter lang, 1,10 Meter breit und 1,51 Meter hoch) wiegt 515 Kilogramm, denn sie ist reich verziert mit Goldblechen, vergoldeten Figuren und Blechen aus Silber und Kupfer, über 300 Gemmen, sowie 1741 Edelsteinen und Perlen. Die Bundesanstalt für Materialforschung und -prüfung in Berlin unterstützte das Rheinische Landesmuseum Bonn und die Kölner Dombauverwaltung bei den Untersuchungen des Schreins der Heiligen Drei Könige mit dem Wirbelstromprüfverfahren. Mit Hilfe von Leitfähigkeitsmessungen auf Basis des Wirbelstromverfahrens konnte die gesamte Metalloberfläche des Dreikönigenschreins untersucht werden. Durch Vergleich der Messwerte mit den zuvor untersuchten Fragmenten konnten die unterschiedlichen Legierungen der Beschläge und Figuren des Schreins identifiziert werden. Die besondere Schwierigkeit hierbei bestand darin, dass es sich überwiegend um sehr dünne Bleche verschiedener Legierungen handelt, die eine stark ausgebildete Reliefstruktur haben und die vergoldet wurden. Mit den Ergebnissen ist der Nachweis gelungen, dass es schon im frühen 19. Jahrhundert eine äußerst überzeugende kopistische Technik bei der Herstellung von Prägewerkzeugen gab. Die Ergebnisse der Wirbelstromprüfung waren für die rheinländischen Kunsthistoriker argumentativ von großer Bedeutung. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Wirbelstromprüfung KW - Leitfähigkeitsprüfung PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (P23) SP - 1 EP - 6 CY - Berlin AN - OPUS4-21882 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Prager, Jens A1 - Hoever, C. A1 - Kreutzbruck, Marc T1 - Untersuchungen zur Anregung geführter Wellen in Platten mittels Gruppenstrahlertechnik N2 - Geführte Wellen breiten sich in Platten und Hohlzylindern über weite Entfernungen aus. Aus dieser Eigenschaft ergibt sich ein hohes Anwendungspotential dieser Wellenart für die zerstörungsfreie Prüfung ausgedehnter Bauteile und Strukturen mittels Ultraschall. Nachteilig für die Anwendung geführter Wellen sind ihr dispersives Verhalten und die zunehmende Anzahl ausbreitungsfähiger Wellenmoden bei hohen Frequenzen. Ziel des Einsatzes der Gruppenstrahlertechnik ist es, eine ausgewählte Wellenmode selektiv anzuregen bzw. zu empfangen. Durch die Änderung des Schwenkwinkels im Gruppenstrahlerprüfkopf wird eine definierte Spurwellenlänge auf dem Interface zwischen Prüfkopf und Struktur festgelegt, die zur Anregung einer Welle mit entsprechender Phasengeschwindigkeit führt. Da der Schwenkwinkel elektronisch verändert werden kann, lässt sich auch die angeregte Wellenmode elektronisch auswählen, worin der große Vorteil des vorgestellten Verfahrens liegt. In den vorgestellten Untersuchungen wurde die Anwendbarkeit der Methode experimentell demonstriert. Der Anregemechanismus wurde theoretisch beleuchtet und die Wellenausbreitung im Prüfkopf mit verschiedenen analytischen Ansätzen modelliert. Mit diesen Modellen können Fragen der Richtwirkung und der Effizienz der Anregung detailliert untersucht werden. Die modellierten Wellenfelder wurden mit den experimentellen Ergebnissen verglichen und die Anwendbarkeit der theoretischen Ansätze beurteilt, wobei die Ergebnisse der theoretischen Untersuchungen im Experiment verifiziert werden konnten. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (P41) SP - 1 EP - 5 CY - Berlin AN - OPUS4-21883 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gohlke, Dirk A1 - Matthies, Klaus T1 - Hochauflösende Ultraschallprüfung zur Ermittlung mikroskopischer Einschlüsse in hochbelasteten Bauteilen N2 - Die Ultraschallprüftechniken zur Bestimmung des Reinheitsgrades von Stählen gewinnen immer mehr an Bedeutung, erkennbar u.a. auch am Stahl- Eisen-Prüfblatt SEP 1927 "Ultraschall-Tauchtechnik-Prüfung zur Bestimmung des makroskopischen Reinheitsgrades von gewalzten oder geschmiedeten Stäben aus Stahl". Muss aber der mikroskopische Reinheitsgrad bestimmt werden, so müssen die hier vorgeschlagenen Prüftechniken versagen, da die Ultraschallprüfung als integrales Verfahren alle Reflektoren, die sich innerhalb eines Schallbündels befinden, erfasst und diese als einen entsprechend großen Reflektor darstellt. Daher bietet sich als Lösung - wenn überhaupt - nur die Verwendung von stark fokussierten, hochfrequenten Prüfköpfen an. Die durchgeführten Messungen haben dies bestätigt, so dass es durchaus möglich ist, mit einer geeigneten Ultraschall-Messtechnik den mikroskopischen Reinheitsgrad von Stählen zu bestimmen. Die erzielbare Genauigkeit hängt aber im Wesentlichen davon ab, wie hoch die Anzahl der Einschlüsse pro Volumenanteil ist, also letztendlich vom Schallbündeldurchmesser. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Di.2.B.1) SP - 1 EP - 8 CY - Berlin AN - OPUS4-21884 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Laible, Patrick A1 - Heckel, Thomas T1 - Quantitative Risstiefenbestimmung an Eisenbahnschienen mit Ultraschall N2 - Die Detektion von Rissen in Eisenbahnschienen erfolgt mit Hilfe von Ultraschall- und Wirbelstromprüftechniken. Zur Verbesserung der Aussage der Tiefenbestimmung von zur Fahrfläche hin geöffneten tiefen Rissen wurde von der BAM ein entsprechender Lösungsansatz erarbeitet und im Labormaßstab erprobt. Eine spezielle Sender-Empfänger-Anordnung ermöglicht in Verbindung mit einer auf der TOFD-Technik basierenden Datenerfassung mit anschließender Laufzeitanalyse des Signals die Bestimmung von Risstiefen bis 30 mm. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (P66) SP - 1 EP - 6 CY - Berlin AN - OPUS4-21885 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dietrich, M. A1 - Glassner, M. A1 - Gruendling, T. A1 - Schmid, Christina A1 - Falkenhagen, Jana A1 - Barner-Kowollik, C. T1 - Facile conversion of RAFT polymers into hydroxyl functional polymers: a detailed investigation of variable monomer and RAFT agent combinations N2 - We report the systematic investigation of a recently introduced one-pot radical transformation of methacrylate and acrylate-type polymers prepared via reversible addition fragmentation chain transfer (RAFT) polymerization into hydroxyl functional polymers. The simple reaction procedure involves stirring a solution of the RAFT functional polymer and an azo-initiator in tetrahydrofuran at elevated temperatures (T = 60 °C) in the presence of ambient air. Subsequent reduction of the formed hydroperoxide functional polymers to hydroxyl functional polymers is achieved in a one-pot procedure using triphenylphosphine. Polymers investigated in the current study are poly(methyl acrylate) (pMA), poly(butyl acrylate) (pBA), poly(isobornyl acrylate) (piBoA) and poly(tert-butyl acrylate) (ptBA) carrying a dithiobenzoate or phenyldithioacetate end terminius as well as a symmetrical trithiocarbonate mid chain function. Quantitative conversion into the hydroperoxyl and hydroxyl terminated product is observed when trithiocarbonate functional polymers are employed. In the case of dithiobenzoate and phenyldithioacetate functional acrylic polymers, some minor side products due to the oxidation of the RAFT end-group are generated. Size exclusion chromatography (SEC) and size exclusion chromatography–electrospray mass spectrometry (SEC-ESI-MS) were employed to monitor the progress of the reaction and to investigate the proposed reaction mechanism for the model polymers. When trithiocarbonate functional polymers are employed in the transformation reaction, the SEC analysis shows a bisection of the initial Mn. Collision induced dissociation (CID) MS experiments of the intermediate reaction products were conducted to gain in-depth information about the chemical structure. The new backbone linked hydroxyl group provides a versatile anchor for chemical end-group conversions and conjugation reactions with RAFT prepared polymers, alleviating problems with the rather limited ability of the dithioester end-group to undergo non-radical transformations. KW - Polymers KW - RAFT KW - SEC/ESI-mass spectrometry KW - CID-MS PY - 2010 DO - https://doi.org/10.1039/b9py00273a SN - 1759-9954 SN - 1759-9962 VL - 1 IS - 5 SP - 634 EP - 644 AN - OPUS4-21907 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ryabov, Y. A1 - Gutina, A. A1 - Feldman, Y. A1 - Frunza, S. A1 - Frunza, L. A1 - Schönhals, Andreas T1 - Comment on "investigating hydration dependence of dynamics of confined water: Monolayer, hydration water, and Maxwell-Wagner processes" [J. Chem. Phys. 128, 154503 (2008)] N2 - This comment on the experimental methods and the conclusions of the paper "Investigating hydration dependence of dynamics of confined water: Monolayer, hydration water, and Maxwell–Wagner processes" [ J. Sjöström et al., J. Chem. Phys.128, 154503 (2008) ] exposes serious shortcomings in the understanding and the interpretation of the observed relaxation behavior of confined water presented in the article. There are contradictions between the suggested theory and the experimental observations that mislead the reader. In this comment we prove that the Maxwell–Wagner relaxation cannot explain the nonmonotonous temperature dependence for the process observed in confined water. PY - 2010 DO - https://doi.org/10.1063/1.3451102 SN - 0021-9606 SN - 1089-7690 VL - 133 SP - 037101-1 - 037101-2 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-21908 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Siegel, David A1 - Feist, M. A1 - Proske, Matthias A1 - Koch, Matthias A1 - Nehls, Irene T1 - Degradation of the alternaria mycotoxins alternariol, alternariol monomethyl ether, and altenuene upon bread baking N2 - The stability of the Alternaria mycotoxins alternariol, alternariol monomethyl ether, and altenuene upon bread baking was investigated by model experiments using a spiked wholemeal wheat flour matrix. For alternariol and alternariol monomethyl ether, but not for altenuene, degradation products, formed through a sequence of hydrolysis and decarboxylation, could be identified in pilot studies. The simultaneous quantification of alternariol, alternariol monomethyl ether, altenuene, and the degradation products was achieved by a newly developed high performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS) multimethod. The obtained quantitative data indicate that the Alternaria mycotoxins are barely degraded during wet baking, while significant degradation occurs upon dry baking, with the stability decreasing in the order alternariol monomethyl ether > alternariol > altenuene. The novel degradation products could be detected after the wet baking of flour spiked with alternariol and in a sample survey of 24 commercial cereal based baking products. KW - Alternariol monomethyl ether KW - Alternariol KW - Altenuene KW - Degradation KW - Baking KW - Bread KW - HPLC-MS/MS PY - 2010 DO - https://doi.org/10.1021/jf102156w SN - 0021-8561 SN - 1520-5118 VL - 58 IS - 17 SP - 9622 EP - 9630 PB - American Chemical Society CY - Columbus, Ohio AN - OPUS4-21909 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Koch, Matthias A1 - Köppen, Robert A1 - Siegel, David A1 - Witt, Angelika A1 - Nehls, Irene T1 - Determination of total sulfite in wine by ion chromatography after in-sample oxidation N2 - Sulfur dioxide (SO2) or sulfites are the most common preservatives used in winemaking. The level of total SO2 is subject to regulation. Currently, the regulatory determination of total SO2 (including sulfites) is done by the optimized Monier–Williams (OMW) method, which includes time-consuming distillation and titration steps. This paper describes the development and application of an alternative, rapid, straightforward, and reliable method for the determination of total sulfite in wine. In this method, a simple oxidation step using alkaline hydrogen peroxide (H2O2) solution is followed by ion chromatographic (IC) analysis of sulfate coupled with conductometric detection. Thirteen wines were analyzed in order to compare the in-sample oxidation method with the OMW-procedure. A t-test revealed satisfying compliance regarding sample preparation, i.e., alkaline H2O2 treatment and acidic distillation (OMW method). Comparable results were also obtained between IC analysis and acid/base titration. Our results indicate that the novel method (limit of quantification: 4 mg SO2 L-1) is well suited for the cost-efficient monitoring of regulatory limits. KW - Sulfur dioxide KW - Wine analysis KW - Hydrogen peroxide oxidation KW - IC KW - Optimized Monier-Williams method PY - 2010 DO - https://doi.org/10.1021/jf102086x SN - 0021-8561 SN - 1520-5118 VL - 58 IS - 17 SP - 9463 EP - 9467 PB - American Chemical Society CY - Columbus, Ohio AN - OPUS4-21912 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Geburtig, Anja A1 - Wachtendorf, Volker T1 - Determination of the spectral sensitivity and temperature dependence of polypropylene crack formation caused by UV-irradiation N2 - For polypropylene of varied stabilization, spectral sensitivity as well as temperature dependence of irradiation caused crack formation was determined in artificial irradiation tests. UV radiant exposure HUV necessary to generate crack formation was measured both in spectrally dispersed irradiation and artificial irradiation in a Fluorescent UV lamp device. Dependencies were fitted to a plateau function and an Arrhenius function, respectively, to describe the action of irradiation by response functions. Applied to weather data from Phoenix, the results were compared with respective outdoor exposure results. KW - Weathering KW - UV KW - Temperature KW - Numerical simulation PY - 2010 DO - https://doi.org/10.1016/j.polymdegradstab.2010.06.014 SN - 0141-3910 SN - 1873-2321 VL - 95 IS - 10 SP - 2118 EP - 2123 PB - Applied Science Publ. CY - London AN - OPUS4-21913 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Jaunich, Matthias A1 - Stark, Wolfgang A1 - Wolff, Dietmar T1 - A new method to evaluate the low temperature function of rubber sealing materials N2 - A new method for the evaluation of the low temperature properties of rubber materials is presented. The method emulates the standardized compression set measurement, which is frequently used for sealing materials, but can be performed within a considerably shorter time. The results are compared with the standard test and found to be qualitatively the same. Slight differences are discussed on the basis of the differences in the measurement procedures. Further data evaluation is done by fitting functions to describe the material behaviour. KW - Sealing material KW - Elastomer KW - Compression set KW - Dynamic mechanical analysis KW - Low temperature behaviour PY - 2010 DO - https://doi.org/10.1016/j.polymertesting.2010.07.006 SN - 0142-9418 VL - 29 IS - 7 SP - 815 EP - 823 PB - Elsevier Science CY - Amsterdam [u.a.] AN - OPUS4-21914 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schweikhard, E.S. A1 - Kuhlmann, S.I. A1 - Kunte, Hans-Jörg A1 - Grammann, K. A1 - Ziegler, C. M. T1 - Structure and function of the universal stress protein TeaD and its role in regulating the ectoine transporter TeaABC of halomonas elongata DSM 2581T N2 - The halophilic bacterium Halomonas elongata takes up the compatible solute ectoine via the osmoregulated TRAP transporter TeaABC. A fourth orf (teaD) is located adjacent to the teaABC locus that encodes a putative universal stress protein (USP). By RT-PCR experiments we proved a cotranscription of teaD along with teaABC. Deletion of teaD resulted in an enhanced uptake for ectoine by the transporter TeaABC and hence a negative activity regulation of TeaABC by TeaD. A transcriptional regulation via DNA binding could be excluded. ATP binding to native TeaD was shown by HPLC, and the crystal structure of TeaD was solved in complex with ATP to a resolution of 1.9 Å by molecular replacement. TeaD forms a dimer–dimer complex with one ATP molecule bound to each monomer, which has a Rossmann-like α/β overall fold. Our results reveal an ATP-dependent oligomerization of TeaD, which might have a functional role in the regulatory mechanism of TeaD. USP-encoding orfs, which are located adjacent to genes encoding for TeaABC homologues, could be identified in several other organisms, and their physiological role in balancing the internal cellular ectoine pool is discussed. PY - 2010 DO - https://doi.org/10.1021/bi9017522 SN - 0006-2960 SN - 1520-4995 VL - 49 IS - 10 SP - 2194 EP - 2204 PB - ACS Publ. CY - Washington, DC AN - OPUS4-21915 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ewert, Uwe A1 - Beckmann, Jörg A1 - von Chrzanowski, Lars A1 - Brekow, Gerhard A1 - Brackrock, Daniel T1 - Time of Flight Diffraction (ToFD) with THz Radiation- an Alternative to the Ultra Sound- ToFD Technique for Non-Metallic Materials T2 - Review of Progress in Quantitative NDE CY - San Diego, CA, USA DA - 2010-07-18 PY - 2010 AN - OPUS4-21926 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bresch, Harald A1 - Orts Gil, Guillermo A1 - Natte, K. A1 - Österle, Werner A1 - Seeger, Stefan T1 - Size determination of non crystalline Silica particles with different methods T2 - International Aerosol Conference 2010 CY - Helsinki, Finland DA - 2010-08-29 PY - 2010 AN - OPUS4-21927 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulze, Rolf-Dieter A1 - Mix, Renate A1 - Friedrich, Jörg F. T1 - Aerosol-Barriere-Entladung und Elektrospray zur ultradünnen Polymerabscheidung T2 - Thüringer Grenz- und Oberflächentage CY - Gera, Germany DA - 2010-09-07 PY - 2010 AN - OPUS4-21929 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang A1 - Teteris, Gundars A1 - Braun, Ulrike A1 - Bohmeyer, W. A1 - Lange, K. A1 - McHugh, J. T1 - Kontrolle der Härtungsreaktion bei Faserverbundbauteilen T2 - 10. Schwarzheider Kunststoffkolloquium CY - Schwarzheide, Germany DA - 2010-09-08 PY - 2010 AN - OPUS4-21930 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von Chrzanowski, Lars A1 - Beckmann, Jörg A1 - Marchetti, Barbara A1 - Ewert, Uwe A1 - Schade, U. T1 - Terahertz-Strahlung - Möglichkeiten für die zerstörungsfreie Prüfung von Flüssigkeiten N2 - Elektromagnetische Wellen von 0.3 bis 6 Terahertz (THz) werden als THz-Strahlung bezeichnet. Im elektromagnetischen Spektrum sind sie zwischen Mikro-/Millimeterwellen und Infrarot angesiedelt. Der nicht ionisierende Charakter und die Möglichkeit, Verpackungsmaterialen sowie Kleidung zu durchstrahlen, machen die THz-Strahlung für bildgebende- und spektroskopische Anwendungen sehr interessant. Besondere Aufmerksamkeit gilt der Zeitaufgelösten Terahertz- Spektroskopie (THz-TDS) im Sicherheitssektor. Feste Spreng- und Gefahrenstoffe sind vielfach bezüglich ihrer Transmissions- und Reflexionseigenschaften untersucht worden, um sie anhand ihrer ‚Fingerprints’ zu identifizieren. Moderne mit Glasfaser ausgerüstete THz-TD-Spektrometer zeichnen sich im Vergleich zu konventionellen Freistrahlgeräten durch höhere Flexibilität aus. In Zukunft werden diese auch als ‚Handheld’-Geräte entwickelt, um eine Nutzung außerhalb des Laboratoriums zu ermöglichen. Das glasfasergekoppelte Picometrix T-ray 2000 System der BAM wurde in ein Zwei-Kreis Goniometer integriert. Probe und Detektor können unabhängig voneinander bewegt werden. Eine schnelle Überführung der Transmissionsin die Reflexionsanordnung und umgekehrt, ist möglich. Seit der Verwendung flüssiger Brand- und Gefahrstoffe bei terroristischen Anschlägen ist das Interesse an der Identifizierung im Sicherheitsbereich zunehmend gewachsen. Um zu überprüfen, ob die THz-TDS für die spektrale Charakterisierung von Flüssigkeiten eingesetzt werden kann, wurden Transmissions- und Reflexionseigenschaften repräsentativer Flüssigkeiten und Flüssigkeitsgemische bestimmt. Polare Flüssigkeiten sind starke Absorber im THz-Bereich. Ab einer Flüssigkeitsschichtdicke von ca. 1mm ist mit dem THz-Spektrometer T-ray 2000 kein Signal stark polarer Flüssigkeiten mehr detektierbar. Der Einsatz einer Messzelle mit variabler Schichtdicke (50 - 1000 .m) war für die Bestimmung der Transmissionseigenschaften polarer Flüssigkeiten notwendig. Anhand von Transmissions- und Reflexionsuntersuchungen an polaren sowie unpolaren Flüssigkeiten werden die Möglichkeiten der THz-TDS zur berührungslosen Identifizierung von Flüssigkeiten aufgezeigt. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 UR - http://www.ndt.net/article/dgzfp2010/Inhalt/di3b2.pdf SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Di.3.B.2) SP - 1 EP - 10 CY - Berlin AN - OPUS4-21932 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph A1 - Pirskawetz, Stephan ED - Wolf, A. T. T1 - Joint sealing systems for pavements - A new approach towards a performance related evaluation of capability and durability N2 - Joint sealants influence decisively the performance and service life of pavements although they account for only a small fraction of the total investment. Motivated by the damages observed and the resulting, increasing maintenance efforts, the Federal German Government recognizes the need for performance-evaluated joint sealing systems with improved capability (fitness-for-purpose) and durability. A literature study showed that an identification of the actual mechanical system behavior under realistic loads as well as a prediction regarding the durability (fatigue, climatic effects) of joint sealing systems are either completely lacking in most of the relevant evaluation methods or have only been incompletely addressed previously. Furthermore an imbalance between commonly used test methodologies and the actual development status of modern modified sealing materials exists, i.e., the current test methods are not effective in evaluating the performance of tailor-made products. In this paper, the authors suggest a methodology to overcome the present situation. In contrast to the existing, predominantly empirical evaluation and selection of joint sealing materials and systems for pavements, the new approach is defined by verified performance under relevant and superimposed loads. This new approach is expected to allow a more engineered joint design. In addition to the adaptation of performance-oriented material identification tests, a special focus was placed on the development and installation of a complex test facility for the investigation of the service capability and durability of joint sealing systems in building constructions in general. This paper presents an attempt at the realization of this approach for pavement joints with the help of our new joint sealant test equipment utilizing a specific, adapted load function, which comprises cyclic movements (slow and fast acting), as well as crucial climatic exposures. The test data and its interpretation are discussed. For example, the actual mechanical behavior of the various joint sealing systems as well as the relevant maximum loading of cohesive and adhesive bonds can be deduced and used to differentiate between systems. Furthermore, information gained allows discrimination of products within the various joint sealing systems. The test results will also enable numerical simulations, e.g., of different joint designs or materials by finite element analysis. The fatigue behavior is detected by analysis of cycle-dependent changes of the mechanical system characteristics. The evaluation methodology further allows investigation of the degradation mechanisms of specific system failures and, thus, enables service life prediction by reproducing the performance of the complete system under realistic conditions. Constructional defects and material flaws can be activated and detected by the performance-related test methodology, thus identifying possible corrections to material selection and application procedures. The potential of the proposed evaluation methodology is discussed for several thermoplastic and reactive joint sealing systems. KW - Pavement joints KW - System evaluation KW - System test method KW - Superimposed loading KW - Performance KW - Mechanical characteristics KW - Capability evaluation KW - Durability evaluation KW - Cohesive failure KW - Adhesive failure PY - 2010 SN - 978-0-8031-3426-3 N1 - Serientitel: ASTM Selected Technical Papers – Series title: ASTM Selected Technical Papers VL - 3 IS - STP 1514 SP - 15 EP - 37 CY - West Conshohocken, PA, USA AN - OPUS4-21933 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thomas, Hans-Martin A1 - Dey, Anika A1 - Heyder, R. T1 - Eddy current test method for early detection of rolling contact fatigue (RCF) in rails N2 - The findings indicate that rolling contact fatigue with consecutive head checks develops preferentially in rail sections that have experienced operational work-hardening. Such hardening can be identified by instruments measuring the increased hardness values with respect to the base material. Eddy current testing was initially introduced with the aim to detect head checks and determine their damage depth. Because the material texture influences eddy current flow in the test objects very strongly, variations in hardness can easily be visualised using this method. Thus, in principle, it is possible to predict places where head checks will emerge later. This knowledge may be very helpful in improving our understanding of head check emergence under real conditions. This knowledge may also help in developing new and effective precautionary maintenance strategies. KW - Rails KW - Rolling contact fatigue KW - Head checks KW - Non-destructive testing KW - Eddy current technique PY - 2010 DO - https://doi.org/10.1784/insi.2010.52.7.361 SN - 0007-1137 VL - 52 IS - 7 SP - 361 EP - 365 PB - British Institute of Non-Destructive Testing CY - Northampton AN - OPUS4-21934 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mc Hugh, Jarlath A1 - Fideu, P. A1 - Herrmann, A. A1 - Stark, Wolfgang T1 - Determination and review of specific heat capacity measurements during isothermal cure of an epoxy using TM-DSC and standard DSC techniques N2 - The technique normally used to measure Cp during isothermal cure is Temperature Modulated - Dynamic Scanning Calorimetry TM-DSC. It is however not standardised, experimentally complicated and quite time intensive. As will be shown, Cp may also be estimated during isothermal cure just from using dynamic heating experiments on a fully cured sample. Such values are often sufficient for isothermal heat transfer models that otherwise employ a constant Cp value obtained from the fully cured epoxy. Secondly, the results from dynamic heating experiments provide a quick means, in comparison to isothermal TMDSC measurements, of estimating Cp variation during cure as well as providing a good estimate value for Cp towards the end of isothermal cure. As will be shown, such values obtained from a standardised measurement procedure are very helpful in setting up TMDSC experiments that are more sensitive to experimental error influenced by factors such as sample weight and geometry. The DSC results illustrate that the measured heat capacity Cp for a fully cured epoxy over a temperature range are very similar to values for samples partially cured at corresponding isothermal temperatures, under the prerequisite that vitrification takes place. In such cases the primary influence on Cp is specific measurement temperature and not degree of cure. For isothermal cure temperatures investigated between 150 and 200 °C, the total change of Cp during cure is nearly constant and correlates well with values published by authors on other epoxy based systems. Taking Cp variation as constant, it is possible from just dynamic heating experiments on the cured epoxy to estimate Cp for the uncured epoxy system at specific cure temperatures. The next step would be to estimate the full Cp profile during isothermal cure, however, in such cases, the time to vitrification would also be needed as additional information. PY - 2010 DO - https://doi.org/10.1016/j.polymertesting.2010.04.004 SN - 0142-9418 VL - 29 IS - 6 SP - 759 EP - 765 PB - Elsevier Science CY - Amsterdam [u.a.] AN - OPUS4-21916 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kannengießer, Thomas A1 - Brauser, Stephan A1 - Kromm, Arne A1 - Gibmeier, J. T1 - The use of synchrotron radiation for materials research in welding T2 - 2nd WMRIF (World Materials Research Institutes Forum) CY - Berlin, Germany DA - 2010-09-02 PY - 2010 AN - OPUS4-21917 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krankenhagen, Rainer A1 - Kervalishvili, Guram N. A1 - Maierhofer, Christiane T1 - Influence of air gaps on the thermal behaviour of plaster-concrete-bonds T2 - QIRT 2010 CY - Quebec City, Canada DA - 2010-07-27 PY - 2010 AN - OPUS4-21918 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Harrer, Andrea A1 - Pulz, Robert A1 - Röllig, Mathias A1 - Rehmer, Birgit T1 - Untersuchung von Transport- und Schädigungsprozessen in Keramiken und mineralischen Baustoffen mit lokal und global angeregter aktiver Thermografie T2 - Sensoren und Messsysteme 2010, 15. ITG/GMA-Fachtagung CY - Nuremberg, Germany DA - 2010-05-18 PY - 2010 AN - OPUS4-21919 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brauser, Stephan A1 - Pepke, Lutz-Alexander A1 - Weber, Gert A1 - Rethmeier, Michael T1 - Deformation behaviour of spot-welded high strength steels for automotive applications N2 - Numerical simulation of component and assembly behaviour under different loading conditions is a main tool for safety design in automobile body shell mass production. Knowledge of local material behaviour is fundamental to such simulation tests. As a contribution to the verification of simulation results, the local deformation properties of spot-welded similar and dissimilar material joints in shear tension tests were investigated in this study for a TRIP steel (HCT690T) and a micro-alloyed steel (HX340LAD). For this reason, the local strain distribution was calculated by the digital image correlation technique (DIC). On the basis of the hardness values and microstructure of the spot welds, the differences in local strain between the selected material combinations are discussed. Additionally, the retained austenite content in the TRIP steel was analysed to explain the local strain values. Results obtained in this study regarding similar material welds suggest significant lower local strain values of the TRIP steel HCT690T compared to HX340LAD. One reason could be the decrease of retained austenite in the welded area. Furthermore, it has been ascertained that the local strain in dissimilar material welds decreases for each component compared with the corresponding similar material weld. KW - Resistance spot welding KW - Deformation behaviour KW - Advanced high strength steel KW - TRIP steel KW - Similar and dissimilar material spot weld KW - EBSD KW - SEM KW - Strain field PY - 2010 DO - https://doi.org/10.1016/j.msea.2010.07.091 SN - 0921-5093 SN - 1873-4936 VL - 527 IS - 26 SP - 7099 EP - 7108 PB - Elsevier CY - Amsterdam AN - OPUS4-21921 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Poli, Marco A1 - Grätz, Rainer A1 - Schröder, Volkmar T1 - Influence of obstacles and initial pressure on turbulent gas explosion venting T2 - 19th International congress of chemical and process engineering (CHISA 2010) / 7th European congress of chemical engineering (ECCE-7) CY - Prague, Czech Republic DA - 2010-08-28 KW - Explosionsdruckentlastung KW - Turbulente Verbrennung KW - Explosionsschutz PY - 2010 SN - 978-80-02-02210-7 IS - F2.5 / 0911 SP - 1 EP - 7 CY - Prague, Czech Republic AN - OPUS4-21922 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Hensel, Christina A1 - Schmidtchen, Ulrich A1 - Holtappels, Kai T1 - The behavior of acetylene cylinders involved in fire: An experimental and numerical analysis N2 - Fire exposure tests of acetylene cylinders were performed. The purpose of the experiments was to gather information on the behavior in fire of such vessels, depending on the initial charge of acetylene. In fact "empty" acetylene cylinders still contain the solvent in which acetylene is dissolved plus the amount of acetylene to saturation at atmospheric pressure and ambient temperature and may still constitute a threat to safety. In the fire exposure tests performed the hazardousness of these vessels was demonstrated, since it was observed that not only fully charged acetylene cylinders but also cylinders with saturated solvent can explode, provided the heat transfer to the vessel is sufficient. The times to explosion were shorter for fully charged cylinders, due to the higher initial pressure and to the faster pressure increase. The effects of the explosions are comparable for both fully charged cylinders and for cylinders with saturated solvent, except for the smaller fireball which is produced in the second case, due to the smaller amount of fuel available. In both cases the cylinder walls or at least fragments can fly further than 100 m away from the burst location. Results of the experiments are presented in the paper. During the tests, temperature measurements at the cylinder walls and in the cylinder interior were performed. Furthermore, the pressure in the cylinder was recorded. The collected data will serve for the validation of a numerical model for the simulation of the heating of acetylene cylinders involved in fire and of the afterward cooling with water, which has been developed. The constitutive model equations and the results of some simulations are presented in the paper. T2 - 19th International congress of chemical and process engineering (CHISA 2010) / 7th European congress of chemical engineering (ECCE-7) CY - Prague, Czech Republic DA - 2010-08-28 KW - Safety KW - Acetylene KW - Heat transfer KW - Fire KW - Simulation PY - 2010 SN - 978-80-02-02210-7 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. IS - F3.1 / 0973 SP - 1 EP - 13 CY - Prague, Czech Republic AN - OPUS4-21923 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Srinivasan, P. A1 - Wiggenhauser, Herbert A1 - Murthy, S.G.N. A1 - Bhaskar, S. A1 - Ravisankar, K. A1 - Iyer, N.R. T1 - Advanced non-destructive testing methods for application to reinforced concrete structures - Collaborative research between SERC and BAM N2 - Nondestructive testing (NDT) of concrete structures plays an important role in civil engineering. CSIR-SERC, India, for the past three decades involved in the conditon assessment of civil infrastructures based on the expertise and the methodology developed in the area of NDT. Prof., Wiggenhauser, BAM, Berlin visited SERC, under the CSIR- Humboldt Reciprocity Research Award for 2006. During his visit, scientists of SERC have gained knowledge in the area of advanced NDT methods. A unique large scale two storied reinforced concrete specimen was cast at SERC, with columns and beams of different sizes, cross section having different percentages of reinforcement. The defects suc has honeycombs, cracks, delamination, presence od conduits, ducts, etc. were also incorporated. Facilities were created at SERC in the area of advanced NDT methods. BAM, Germany, has offered assistance to three scientists of SERC to work at BAM and to have further exposure in the area of advanced NDT methods. One of the scientists is pursuing Ph.D., in the application of advanced NDT methods for identification of damage in concrete structures. Activities have been carried out on the NDT-CE (Non-Destructive Testing in Civil Engineering) Compendium which is a compilation of the descriptions of 115 methods. It is freely accessible on the Internet. This paper highlights the collaborative research work carried out by SERC and BAM in the area of advanced NDT methods for the evaluation of defects/ damage in reinforced concrete structures and also as a quality assurance tool. The future programme of work is also discussed. T2 - 5th World conference on structural control and monitoring (5WCSCM) CY - Tokyo, Japan DA - 2010-07-12 PY - 2010 IS - A-7 / 044 SP - 1 EP - 11 CY - Tokyo, Japan AN - OPUS4-21925 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Prager, Jens A1 - Petersson, B.A.T. T1 - Improving the statistical wave field description using the Waterhouse correction N2 - The diffuse field assumption employed in basic statistical energy analysis (SEA) and in statistical room acoustics is violated for source and receiver positions close to boundaries or discontinuities. A simple approach is proposed to include the correction initially suggested by Waterhouse based on spherical Bessel functions in SEA predictions for rectangular rooms. With this modification the SEA results will be augmented by a position dependence and an additional frequency dependence. The approach is applied and demonstrated also for plate-like structures with different boundary conditions. An analytical solution is shown for the corner position on a simply supported plate and for edge positions on plates with more complex boundary conditions. The validity of the approach is confirmed by means of comparisons with modal analysis and finite element calculations. KW - Acoustic wave propagation KW - Acoustic wave scattering KW - Architectural acoustics KW - Bessel functions KW - Statistical analysis PY - 2010 DO - https://doi.org/10.1121/1.3397453 SN - 0001-4966 SN - 1520-8524 VL - 128 IS - 1 SP - 20 EP - 27 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-21946 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldmann, Ines A1 - Torge, Manfred A1 - Krug, Sonja A1 - Bücker, Michael T1 - Schadensphänomene an Quecksilberspiegeln T2 - Tagung: "Archäometrie und Denkmalpflege 2010" CY - Bochum, Germany DA - 2010-09-14 PY - 2010 AN - OPUS4-21947 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Nöther, Nils A1 - Wendt, Mario A1 - Wosniok, Aleksander ED - Santos, J.L. ED - Culshaw, B. ED - López-Higuera, J.M. ED - MacPherson, W.N. T1 - Distributed fiber optic sensors embedded in technical textiles for structural health monitoring N2 - Technical textiles with embedded distributed fiber optic sensors have been developed for the purposes of structural health monitoring in geotechnical and civil engineering. The distributed fiber optic sensors are based on Brillouin scattering in silica optical fibers and OTDR in polymer optical fibers. Such "smart" technical textiles can be used for reinforcement of geotechnical and masonry structures and the embedded fiber optic sensors can provide information about the condition of the structures and detect the presence of any damages and destructions in real time. Thus, structural health monitoring of critical geotechnical and civil infrastructures can be realized. The paper highlights the results achieved in this innovative field in the framework of several German and European projects. T2 - 4th European workshop on optical fibre sensors CY - Porto, Portugal DA - 2010-09-08 KW - Fiber optic sensor KW - Distributed sensor KW - Brillouin sensor KW - Polymer optical fibers (POF) KW - POF sensor KW - POF OTDR KW - Strain sensor KW - Technical textiles KW - Geotextiles PY - 2010 SN - 978-0-8194-8083-5 DO - https://doi.org/10.1117/12.868052 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 7653 SP - 76530A-1 - 76530A-12 PB - SPIE, the International Society for Optical Engineering CY - Bellingham, Wash. AN - OPUS4-21948 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Droste, Bernhard T1 - Interaction of Package Design Development and Package Design Safety Assessment - Development and Assessment of Packages for Transport and Storage of Radioactive Materials within Decommissioning Activities - T2 - 16th International Symposium on the Packaging and Transportation of Radioactive Materials PATRAM 2010 CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-21950 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ballheimer, Viktor A1 - Wille, Frank A1 - Droste, Bernhard T1 - Mechanical Safety Analysis for high burn-up Spent Fuel Assemblies under Accident Transport Conditions T2 - 16th International Symposium on the Packaging and Transportation of Radioactive Materials PATRAM 2010 CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-21951 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella A1 - Skrotzki, Birgit T1 - Materials testing - How to put the right question and get the right answers T2 - MSE 2010, Keynote lecture CY - Darmstadt, Germany DA - 2010-08-24 PY - 2010 AN - OPUS4-21953 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Wettmarshausen, Sascha A1 - Hanelt, Sven A1 - Mach, Reinhard A1 - Mix, Renate A1 - Zeynalov, Eldar A1 - Meyer-Plath, Asmus T1 - Plasma-chemical bromination of graphitic materials and its use for subsequent functionalization and grafting of organic molecules N2 - Plasma-chemical bromination has been shown to be well-suited for highly selective and efficient C–Br-functionalization of polyolefin surfaces and has now been applied to graphitic materials, including highly oriented pyrolytic graphite (HOPG), natural graphite, carbon nanotubes, and graphitized carbon fibres. In contrast to the radical substitution of hydrogen by bromine at hydrogen-terminated sp3-hybridized carbon, bromination of all-carbon bound sp2-hybridized carbon in graphene requires addition to aromatic double bonds. The related change of sp2 to sp3 hybridization of the carbon atoms involved helps to explain experimental results of a loss in surface planarity on brominated HOPG. Bromine concentrations of up to 50 bromine atoms per 100 C-atoms were achieved in elemental bromine vapour under low-pressure plasma conditions using low-energetic inductively coupled radio-frequency plasma excitation. The time scale of the bromination progress was found to increase with the specific surface area of the material. The results of plasma-chemical bromination are compared to that of wet-chemical electrophilic addition reactions, which achieved 28 Br per 100 C for MWCNT. The resulting C–Br bonds from plasma-chemical processing of graphitic materials were shown to be well-suited for hydroxyl functionalization and for grafting of organic molecules by nucleophilic substitution with 1,6-diaminohexane and (3-aminopropyl)triethoxysilane. PY - 2010 DO - https://doi.org/10.1016/j.carbon.2010.06.054 SN - 0008-6223 SN - 1873-3891 VL - 48 IS - 13 SP - 3884 EP - 3894 PB - Pergamon Press CY - New York, NY AN - OPUS4-21954 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Köppen, Robert A1 - Koch, Matthias A1 - Klein-Hartwig, Karin A1 - Nehls, Irene T1 - Natürliche Umwelt- und Lebensmitteltoxine - Herstellung eines Referenzmaterials für die Mykotoxine T-2 und HT-2 - T2 - Tagung Umwelt 2010 CY - Dessau-Roßlau, Germany DA - 2010-09-07 PY - 2010 AN - OPUS4-21955 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krankenhagen, Rainer A1 - Kervalishvili, Guram N. A1 - Maierhofer, Christiane T1 - Influence of air-gaps on the thermal behaviour of the plaster-concrete bonds N2 - The delamination of a plaster layer, which covers a concrete structure, can be detected by active thermography. In this paper, a systematic series of measurements is described, where the gap between plaster and concrete was varied. These investigations were compared to FEM-simulations. The experimental and simulated data were in good agreement. It was found that the used experimental setup yields only marginal differences between fixed and lose plaster in the thermal behavior. However, significant characteristics within the temperature decays could be resolved, which are clearly related to the air gap. T2 - QIRT 10 - 10th International conference on Quantitative InfraRed Thermography CY - Québec, Canada DA - 2010-07-27 KW - Active thermography KW - Plaster KW - Concrete KW - Temperature decay PY - 2010 UR - http://qirt.gel.ulaval.ca/archives/qirt2010/papers/QIRT%202010-067.pdf SN - 978-2-9809199-1-6 IS - QIRT 2010-067 SP - 1 EP - 5(?) AN - OPUS4-21956 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schlichting, Joachim A1 - Maierhofer, Christiane A1 - Kreutzbruck, Marc T1 - Defect sizing by local excitation thermography N2 - In this article, we present a measurement procedure to gain information about depth and angle of open surface cracks. The method is based on a local excitation with, e.g., a laser. The resulting surface temperature is recorded with an infrared camera. Based on this data, crack-caused anisotropies in the lateral heat flow can be detected and exploited to characterise the cracks. The experimental set-up is based on a Nd:YAG laser. The beam is focused on the test sample by using an optical scanner to generate the required lateral heat flow. The time resolved temperature distribution is recorded with a high-speed infrared camera (InSb FPA, 3 to 5 µm) providing a frame rate of up to 500 Hz. Up to now, only qualitative information was gained from measurements of this type. Whereas the local transient behaviour of temperature distribution provides also quantitative information of the crack parameters. The general concept of the method presented herein has already been published [1], but the mentioned publication is focused on the crack depth only. In this paper, we can show that it is possible to simultaneously resolve the angle and depth and, in particular, the depth of non-perpendicular cracks. T2 - QIRT 10 - 10th International conference on Quantitative InfraRed Thermography CY - Québec, Canada DA - 2010-07-27 KW - FEM KW - Risse KW - Thermografie PY - 2010 UR - http://qirt.gel.ulaval.ca/archives/qirt2010/papers/QIRT%202010-121.pdf SN - 978-2-9809199-1-6 IS - QIRT 2010-121 SP - 773 EP - 780 AN - OPUS4-21957 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - De la Cruz, M.H.C. A1 - Rodrigues, J.M. A1 - Couto, P.R.G. A1 - Da Cunha, V.S. A1 - Bremser, Wolfram T1 - Estimativa da incerteza de medicao em análise cromatográfica: abordagem sobrea quantificacao de carbamato de etila em cachaca N2 - The measurement uncertainty is useful to estimate the confidence of analytical results. Nowadays, a result without the uncertainty statement cannot be considered reliable, but the scientific literature still lacks examples of the estimate of the measurement uncertainty. This paper presents a practical and reliable description of the measurement uncertainty estimation of the analytical determination of ethyl carbamate in cachaça by GC-IDMS. The isotope dilution technique (ID) associated with GC-MS was used to improve the accuracy. The uncertainty estimated corresponds to 10% of the mass fraction of ethyl carbamate (115 ± 11) ng/g, which is in agreement with ppb level. KW - Uncertainty KW - Measurement uncertainty KW - Chromatography KW - Ethyl carbamate PY - 2010 SN - 0100-4042 VL - 33 IS - 7 SP - 1578 EP - 1584 PB - Sociedade Brasileira de Química CY - São Paulo AN - OPUS4-21958 LA - por AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - BOOK A1 - Rurack, Knut A1 - Martínez-Mánez, Ramon T1 - Hybrid (nano)materials meet supramolecular chemistry: A brief introduction to basic terms and concepts KW - Hybridmaterialien KW - Nanopartikel KW - Selbstorganisation KW - Supermolekulare Chemie PY - 2010 SN - 978-0-470-37621-8 SP - 1 EP - 10 PB - John Wiley & Sons CY - Hoboken, New Jersey, USA AN - OPUS4-21959 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rurack, Knut A1 - Martínez-Mánez, Ramon A1 - Sancenón, F. A1 - Descalzo López, Ana Belén ED - Rurack, Knut ED - Martínez-Mánez, Ramon T1 - Biomimetically inspired signaling KW - Bindungstaschen KW - Biochemie KW - Biomimetika KW - Chromatophore KW - Gold KW - Hybridmaterialien KW - Ionenkanäle KW - Metalloregulation KW - Nanopartikel KW - Quantenpunkte KW - Sensorik KW - Silica KW - Supramolekulare Chemie KW - Verdrängungsassays PY - 2010 SN - 978-0-470-37621-8 SP - 549 EP - 580 PB - John Wiley & Sons CY - Hoboken, New Jersey, USA AN - OPUS4-21960 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rurack, Knut A1 - Martínez-Mánez, Ramon ED - Rurack, Knut ED - Martínez-Mánez, Ramon T1 - Supramolecular chemistry meets hybrid (nano)materials: A brief look ahead KW - Hybridmaterialien KW - Ionische Flüssigkeiten KW - Lumineszenz KW - MOFs KW - Nanodiamant KW - Nanopartikel KW - Nanostrukturierter Kohlenstoff KW - Nanostrukturiertes Siliziumcarbid KW - Supramolekulare Chemie PY - 2010 SN - 978-0-470-37621-8 SP - 689 EP - 700 PB - John Wiley & Sons CY - Hoboken, New Jersey, USA AN - OPUS4-21961 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlichting, Joachim A1 - Maierhofer, Christiane A1 - Kreutzbruck, Marc T1 - Laser Thermography for Quantitative Crack Characterization T2 - Quantitative Non-Destructive Evaluation 2010 CY - San Diego, CA, USA DA - 2010-07-18 PY - 2010 AN - OPUS4-21963 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlichting, Joachim A1 - Maierhofer, Christiane A1 - Kreutzbruck, Marc T1 - Defect Sizing by local Excitation Thermography T2 - Quantitative Infrared Thermography International Conference 2010 (QIRT) CY - Quebec City, Canada DA - 2010-07-27 PY - 2010 AN - OPUS4-21964 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Neue Ansätze zur Werkstoffauswahl nichtrostender Stähle im Bauwesen T2 - Praktikertagung im Metallhandwerk CY - Braunschweig, Germany DA - 2010-11-19 PY - 2010 AN - OPUS4-21896 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Verfleckungen auf nichtrostenden Stählen - eine aktuelle Herausforderung T2 - Praktikertagung im Metallhandwerk CY - Braunschweig, Germany DA - 2010-11-19 PY - 2010 AN - OPUS4-21897 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Verfleckungen an Halbzeugen aus Chrom-Nickel Stahl T2 - Landesfachtagung Schweißtechnik, DVS LV Thüringen CY - Luisenthal, Germany DA - 2010-10-01 PY - 2010 AN - OPUS4-21898 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Praxisrelevante Ergebnisse zum Thema Verfleckungen T2 - Kursleiterfortbildung 2010 der Kompetenzzentren für Edelstahl-Rostfrei-Verarbeitung, Fachhochschule Kiel CY - Kiel, Germany DA - 2010-09-27 PY - 2010 AN - OPUS4-21899 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas T1 - Bauteilschäden durch Korrosion T2 - DGM Fortbildungsseminar CY - Cologne, Germany DA - 2010-12-01 PY - 2010 AN - OPUS4-21900 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Jörg A1 - Symietz, Christian A1 - Lehmann, Erhard A1 - Gildenhaar, Renate A1 - Koter, Robert A1 - Berger, Georg T1 - The production of metallic implant materials with a bioactive ceramic layer using femtosecond laser pluses T2 - ISL 2010 - 3rd International Symposium on Laser-Micromachining CY - Chemnitz, Germany DA - 2010-10-27 PY - 2010 AN - OPUS4-21901 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Acikalin, Hatice Aydan A1 - Schalau, Bernd T1 - Eine Vorgehensweise zur Erstellung Quantitativer Risikoanalysen T2 - 5. Sitzung des AK-PB der KAS CY - Bonn, Germany DA - 2010-08-27 PY - 2010 AN - OPUS4-21902 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krietsch, Arne A1 - Schmidt, Martin T1 - Eight Years of Sino-German Coal Fire Research T2 - Seminar at BRE Centre for Fire Safety Engineering CY - Edinburgh, Scotland DA - 2010-08-13 PY - 2010 AN - OPUS4-21903 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin T1 - Fire and Explosion Risks of Combustible Solids T2 - Seminar at BRE centre for Fire Safety Engineering CY - Edinburgh, Scotland DA - 2010-08-13 PY - 2010 AN - OPUS4-21904 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Isecke, Bernd T1 - 25 Jahre Kathodischer Korrosionsschutz im Beton in Deutschland - -Historie,-Entwicklung, -Normung, -jüngste Ereignisse T2 - 8. Symposium Kathodischer Korrosionsschutzvon Stahlbetonbauwerken CY - Esslingen am Neckar, Germany DA - 2010-11-18 PY - 2010 AN - OPUS4-21936 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Poli, Marco A1 - Grätz, Rainer A1 - Schröder, Volkmar T1 - Influence of obstacles and initial pressure on turbulent gas explosion venting T2 - CHISA 2010 CY - Prague, Czech Republic DA - 2010-08-28 PY - 2010 AN - OPUS4-21938 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Welzel, F. A1 - Grunewald, Thomas A1 - Beyer, M. A1 - Grätz, Rainer A1 - Klages, C.-P. T1 - Comparison of mechanically generated friction and impact sparks T2 - 8. International Symposium on Hazards CY - Yokohama, Japan DA - 2010-09-05 PY - 2010 AN - OPUS4-21939 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kromm, Arne T1 - Controlling Welding Residual Stresses by means of Alloy Design T2 - 2nd World Materials Research Institutes Forum, Workshop for Young Scientists CY - Berlin, Germany DA - 2010-08-31 PY - 2010 AN - OPUS4-21940 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Descalzo López, Ana Belén A1 - Zhu, Shengchao A1 - Fischer, Tobias A1 - Rurack, Knut ED - Demchenko, A.P. T1 - Optimization of the coupling of target recognition and signal generation N2 - Fluorescent reporters that literally "light up" upon binding of a target species are particularly interesting from an analytical point of view. This contribution introduces the main signaling concepts in fluorescent probe research, discusses strategies toward their optimization in terms of signal output, and highlights the wealth of alternative protocols that has been realized in the past two decades to create signaling systems with luminescence amplification features. KW - Dyes KW - Fluorescence KW - FRET KW - Molecular Recognition KW - Nanoparticles PY - 2010 SN - 978-3-642-04699-5 DO - https://doi.org/10.1007/978-3-642-04701-5_2 N1 - Serientitel: Springer Series on Fluorescence – Series title: Springer Series on Fluorescence VL - 9 IS - 1 SP - 41 EP - 106 PB - Springer AN - OPUS4-21941 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wehrstedt, Klaus-Dieter A1 - Adams, W. D. A1 - Mak, W. A1 - Malow, Marcus A1 - Kumasaki, M. T1 - Report about the IGUS EOS meeting 2010 in Tokyo KW - IGUS KW - EOS KW - Organic peroxides KW - Self-reactive substances KW - Energetic materials KW - Test methods KW - Oxidizers KW - Ammonium nitrate KW - Fertilizers PY - 2010 SN - 0570-4480 N1 - Sprachen: Japanisch/Englisch - Languages: Japanese/English VL - 49 IS - 4 SP - 240 EP - 243 CY - Tokyo, Japan AN - OPUS4-21942 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heyn, Andreas T1 - Zustandsbewertung von Beschichtungen und Überzügen bei Auslagerungsversuchen T2 - Arbeitskreissitzung "Prüf- und Untersuchungsverfahren" GfKORR CY - Erding, Germany DA - 2010-10-06 PY - 2010 AN - OPUS4-21943 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Faulhaber, Armin A1 - Isecke, Bernd A1 - Beck, Matthias T1 - Determination of self-corrosion in the case of element corrosion of steel in concrete T2 - EUROCORR 2010 CY - Moscow, Russia DA - 2010-09-13 PY - 2010 AN - OPUS4-21944 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Matthias A1 - Faulhaber, Armin A1 - Isecke, Bernd T1 - Untersuchungen zur Eigenkorrosion T2 - 40. Aachener Baustofftag CY - Aachen, Germany DA - 2010-10-28 PY - 2010 AN - OPUS4-21945 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neser, A. A1 - Schreiber, D. A1 - Magallanes, J.M. A1 - Martinez, R. A1 - Zencker, Uwe A1 - Weber, Mike T1 - A Material Testing Program to Characterize the Concrete Behavior under Static and Dynamic Loads T2 - PATRAM 2010 16th International Symposium on the Packaging and Transport of Radioactive Materials CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-22486 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krankenhagen, Rainer A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Kalisch, U. T1 - Qualifizierung und Vergleich zerstörungsfreier Prüfverfahren an historischem Mauerwerk: Messungen an Probekörpern und Fallstudie T2 - 4 Konservierungswissenschaftlichen Kolloquiums in Berlin/Brandenburg CY - Potsdam, Germany DA - 2010-10-29 PY - 2010 AN - OPUS4-22492 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zerbst, Uwe A1 - Ainsworth, R. A. A1 - Madia, Mauro T1 - Grenzlast oder Referenzlast? - Vorschlag für eine hybride Vorgehensweise bei der elastisch-plastischen Bauteilbewertung T2 - 42. Tagung des DVM-Arbeitskreises Bruchvorgänge - Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen CY - Paderborn, Deutschland DA - 2010-02-23 KW - Bruchmechanische Bauteilbewertung KW - EPRI-Methode KW - Referenzspannungsmethode KW - R6-Routine KW - SINTAP KW - FITNET KW - FKM-Richtlinie KW - Grenzlast KW - Referenzlast PY - 2010 SP - 183 EP - 194 AN - OPUS4-22493 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schiller, M. A1 - Mecke, R. A1 - Seidl, T. A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Kalisch, U. A1 - Meinhardt, J. A1 - Hennen, Ch. T1 - Fallbeispiele für die anwendung der 3D-Messtechnik und der aktiven Thermografie in der Denkmalpflege T2 - 4. Konservierungswissenschaftlichen Kolloquiums in Berlin/Brandenburg CY - Potsdam, Germany DA - 2010-10-29 PY - 2010 AN - OPUS4-22494 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schälike, Stefan A1 - Vela-Wallenschus, Iris A1 - Wehrstedt, Klaus-Dieter A1 - Schönbucher, A. T1 - Vorhersage der kritischen thermischen Abstände von LNG-Poolfeuern N2 - Die Bedeutung von Flüssigerdgas (LNG, liquefied natural gas) ist durch die Erschließung entfernt liegender Resourcen und den damit verbundenen Transportwegen sowie durch die verbesserte Prozesstechnik bei der Verflüssigung (z.B. Mixed Fluid Cascade (MFC®) Verflüssigungsprozess) weltweit gestiegen. In den letzten Jahren sind zahlreiche neue Großanlagen wie die in Kollsnes, Hammerfest (beide Norwegen 2003, 2007), Kwinana (Australien 2008) und Shan Shan (China, 2004) mit Kapazitäten von bis 4.7 Mt/a entstanden. Das Gefährdungspotential von flüssigem Erdgas besteht neben dem niedrigen Siedepunkt Tb = −161 °C im Zündbereich zwischen 4.4 - 17 Vol.% sowie im großen Expansionsverhältnis. Bei einer störungsbedingten Freisetzung von LNG kann es somit zu Poolfeuer kommen, wodurch mit großem Schaden an benachbarten verfahrenstechnischen Anlagen und vor allem an Personen zu rechnen ist. T2 - 10. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" Köthen 2010 CY - Köthen/Frankfurt/M., Deutschland DA - 04.11.2010 KW - Anlagensicherheit KW - Umweltschutz KW - Sicherheitstechnik KW - Explosionsschutz KW - Poolfeuer KW - LNG KW - CFD-Simulation KW - Flammentemperatur KW - SEP PY - 2010 SN - 978-3-89746-119-2 N1 - Geburtsname von Vela-Wallenschus, Iris: Vela, I. - Birth name of Vela-Wallenschus, Iris: Vela, I. SP - 1 EP - 11 AN - OPUS4-22466 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian A1 - Brenneis, Rudolf T1 - Schlacken/Aschen - Herstellung von Düngemitteln T2 - 19. Kölner Abfalltage - Von der Abfallwirtschaft zur Rohstoffwirtschaft - Wer sind die Gewinner, wer die Verlierer? CY - Köln, Deutschland DA - 2010-11-02 KW - Klärschlammasche KW - Phosphor KW - Rückgewinnung PY - 2010 IS - Kap. 3.5 SP - 1 EP - 20(?) PB - Kirsten Gutke Verlag AN - OPUS4-22468 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Linck, Lena A1 - Resch-Genger, Ute T1 - Identification of efficient fluorophores for the direct labeling of DNA via rolling circle amplification (RCA) polymerase phi29 N2 - The enzymatic incorporation as well as the spectroscopic properties and photochemical stability of a series of fluorescent labels differing in dye class, charge, and rigidity were studied to identify new tools for signal enhancement in situ on microarrays without secondary labeling. These fluorophores were chosen to spectrally match or resemble the golden standard Cy3. With the rhodamine DY-555, that is three times more emissive than Cy3, we found a bright and stable chromophore, the spectroscopic properties of which are minimally influenced by dye microenvironment. KW - Rolling circle amplification (RCA) KW - DNA KW - Fluorescent label KW - Fluorescence quantum yield KW - Cyanine KW - Stability PY - 2010 DO - https://doi.org/10.1016/j.ejmech.2010.09.005 SN - 0009-4374 SN - 0223-5234 VL - 45 IS - 12 SP - 5561 EP - 5566 PB - EDIFOR CY - Paris AN - OPUS4-22470 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weber, Gert A1 - Gaul, Holger A1 - Rethmeier, Michael ED - Kolleck, R. T1 - Joining of ultra high strength steels for lightweight body shell design in automobile manufacturing T2 - 50th IDDRG anniversary conference - Tools and technologies for the processing of ultra high strength steels CY - Graz, Austria DA - 2010-05-31 KW - Advanced high strength steels KW - Resistance spot welding KW - Weldbonding KW - Lightweight body shell design KW - Process reliability PY - 2010 SN - 978-3-85125-108-1 DO - https://doi.org/10.3217/978-3-85125-108-1-094 SP - 885 EP - 898 PB - Verlag der Technischen Universität Graz CY - Graz, Austria AN - OPUS4-22472 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wolf, J A1 - Riebel, U. A1 - Berger, Wolfgang T1 - Recycling von Photovoltaik-Dünnschichtmodulen mit Hilfe eines Vakuum-Saugstrahlverfahrens T2 - Jahrestagung Aufbereitung und Recycling CY - Freiberg, Germany DA - 2010-11-10 PY - 2010 AN - OPUS4-22475 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pittner, Andreas A1 - Karkhin, V. A. A1 - Schwenk, Christopher A1 - Rethmeier, Michael T1 - Heat source models in simulation of heat flow in fusion welding T2 - 1st Sino-German Workshop "Simulation of Welding" CY - Berlin, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22496 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gebhardt, Moritz Oliver A1 - Redmer, Bernhard A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Laserstrahl-MSG-Hybridschweißen von dickwandigen Präzisionsrohren T2 - 3. Rostocker Schweißtage CY - Rostock, Germany DA - 2010-11-16 PY - 2010 AN - OPUS4-22497 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Quiroz Penaranda, Vanessa A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Laser beam weldability of austenitic and austenitic-ferritic high manganese stainless steel sheets T2 - 63rd Annual Assembly of the International Institute of Welding IIW CY - Istanbul, Turkey DA - 2010-07-11 PY - 2010 AN - OPUS4-22498 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hünert, Daniela A1 - Schulz, Wencke A1 - Kranzmann, Axel T1 - Simultaneous oxidation and carburization under oxyfuel conditions N2 - The combustion of coal in CO2-reduced Oxyfuel power plants requires creep resistant and corrosion resistant materials, which can withstand high temperatures up to 600°C and CO2 rich atmospheres. Among the heat resistant materials, the 9-12% chromium steels are proven to resist high wall temperatures in conventional power plants and are suitable as membrane wall, superheaters and steam piping. During Oxyfuel combustion a flue gas is generated, which consists mainly of H2O (30 mol %) and CO2 (70 mol %). The present paper is focused on the corrosion of 9-12% chromium steels under oxyfuel conditions in a temperature range between 550 and 625°C. Depending on Chromium content of the 9-12%chromium steels, carburization of the base material, perlite formation and carbide formation were observed. Alloys with lower chromium content form a non protective oxide scale with perlite at the scale-alloy interface. Steels with 12% chromium have a small growing oxide scale with enlarged M23C6-particles at the scale-alloy interface. The carburization of the base material is found to be increased for the 9% Cr-steel. Higher pressure of the flue gas results in the formation of less resistant scales and cause accelerated carburization of the base materials. However, the carburization has an impact on the mechanical properties at the surface and leads to an embrittlement, which is deleterious during thermal cycling. Oxidation kinetics, phase analysis of the scale (transmission electron microscope) and carburization depths (microprobe) of the base materials are presented. T2 - EUROCORR 2009 CY - Nice, France DA - 2009-09-06 KW - High-temperature corrosion KW - Carburization KW - 9-12 % Cr-steel KW - M23C6-particles KW - Power plant steels PY - 2010 IS - Paper 7805 SP - 1 EP - 11 AN - OPUS4-22500 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Martin A1 - Ferrero, Fabio A1 - Malow, Marcus A1 - Krause, Ulrich T1 - Vermeidung der Brandentstehung bei der Lagerung von Biomasse T2 - VDI-Fachtagung - Sichere Handhabung brennbarer Stäube CY - Nürnberg, Deutschland DA - 2010-11-16 KW - Selbstentzündung KW - Biomasse KW - Numerische Simulation KW - Brandvermeidung PY - 2010 SN - 978-3-18-092096-2 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 2096 SP - 87 EP - 98 AN - OPUS4-22501 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Oliveira, D.F. A1 - Moreira, E.V. A1 - Silva, A.S.S. A1 - Rabello, J.M.B. A1 - Lopes, R.T. A1 - Pereira, M.S. A1 - Zscherpel, Uwe T1 - Application of the digital radiography in weld inspection of gas and oil pipelines N2 - The aim of this work is to evaluate the feasibility of the direct radiography on weld inspection in oil pipelines and gas pipeline during the manufacturing process. To that, 6 specimens with 6 different thickness and varied height of reinforced weld with 5 different kinds of defects were made. All samples were radiographied using Class I films and flat panel. For all specimens the inspection length was 8''. Thus, with the flat panel the detector-to-object distance varied so that it may adequate to several diameters of the tubes. The detector-to-object distance was calculated based on the physical size of the detector taking into consideration a safe distance between the tube curvature and the flat panel extremities, keeping the lowest possible magnification factor so that it could be obtained the length of the inspection. Images with 6 integration time for each experimental arrangement were obtained. The images obtained with the Flat Panel/YXLON system were analyzed according to their quality by using the Contrast parameters (essential wire) (DNV 2007/ IS0 12096 – with reinforcement and ISO 10893-7 – basis material), Basic Spatial Resolution – BSR (ISO 10893-7) and normalized signal-to-noise ratio - SNRN (ISO 10893-7) and by detectability using as reference the conventional radiography. The results showed that for all thickness, the exposure time used to meet the image quality requirements were below with direct radiography. However the BSR were not reached for thickness of 4.85, 6.40 and 9.67 mm, therefore the compensation principle established by ISO 10893-7 was considered, that is, one more contrast wire for a less wire pair. The digital technique proved to be more sensitive to real defects found on welds than the conventional technique. Then it can be conclude that the digital radiography utilizing the flat panel can be applicable to the oil and gas segment with advantages over conventional technique as to quality aspects, productivity, environment, safety and health. T2 - 10th European conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 KW - Zerstörungsfreie Prüfung KW - Durchstrahlungsprüfung KW - Digitale Radiologie PY - 2010 UR - http://www.ndt.net/article/ecndt2010/reports/1_04_01.pdf IS - Paper 4.02.18 SP - 1 EP - 11(?) AN - OPUS4-22502 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina A1 - Bertovic, Marija A1 - Pavlovic, Mato A1 - Rosenthal, Martina A1 - Finke, Robert A1 - Milsch, Steffen T1 - Fehlerauffindwahrscheinlichkeit zerstörungsfreier Prüfungen T2 - IMQ CY - Crimmitschau, Germany DA - 2010-04-22 PY - 2010 AN - OPUS4-22505 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Voland, Katja T1 - Neueste Technik für bessere Autobahnen - Innovative Prüftechnik zur Verfolgung von Schädigungsprozessen infolge AKR T2 - 51. DAfStb-Forschungskolloquium CY - Kaiserslautern, Deutschland DA - 2010-11-11 KW - Alkali-Kieselsäure-Reaktion KW - Nebelkammer KW - 60 °C-Betonversuch KW - Schallemissionsanalyse KW - Ultraschallgeschwindigkeit KW - µ-3D-CT PY - 2010 VL - 2 IS - Kap. C2 SP - 637 EP - 648 AN - OPUS4-22437 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Malaga, Katarina A1 - Müller, Urs ED - Castro-Borges, P. ED - Moreno, E.I. ED - Sakai, K. ED - Gjorv, O.E. ED - Banthia, N. T1 - Validation and improvement of procedures for performance testing of anti-graffiti agents on concrete surfaces N2 - Graffiti on concrete structures is an ongoing, costly and increasing problem. A number of various anti-graffiti agents available on the market are intended to be resistant to graffiti attack or provide a treatment that aids the removal of graffiti. In several European countries the testing of anti-graffiti agents on concrete structures is following the EN 1504-2. This method is not appropriate for the aimed result. The method tests if an anti-graffiti agent damages a concrete structure and focuses on drying index and frost resistance in comparison with untreated samples. The aspects of the efficacy against graffiti attack, other types of dirt and aesthetic changes due to anti-graffiti protection are not evaluated by the present method. Therefore a validation and improvement of the current method is proposed. T2 - CONSEC`10 - 6th International conference on concrete under severe conditions CY - Mérida, Yucatán, Mexico DA - 2010-06-07 KW - Anti-Graffiti-Systeme KW - Beton KW - Prüfmethoden PY - 2010 SN - 978-0-415-59316-8 SP - 709 EP - 716 PB - Taylor & Francis CY - London, UK AN - OPUS4-22438 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert A1 - Taffe, Alexander T1 - Zerstörungsfreie Prüfverfahren im Bauwesen - ein Überblick T2 - Informationstag "Moderne Bauwerksprüfung - Technische und rechtliche Aspekte" an der Bundesanstalt für Straßenwesen (BASt) CY - Bergisch Gladbach, Germany DA - 2010-11-10 PY - 2010 AN - OPUS4-22439 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Torge, Manfred A1 - Hahn, Oliver T1 - Emission measurements in show cases - the need of standardisation T2 - COST-D42 Final meeting CY - Dublin, Ireland DA - 2010-11-08 PY - 2010 AN - OPUS4-22441 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rübner, Katrin A1 - Jakubcová, Petra A1 - Herbst, Tristan T1 - Saving natural resources by material recycling N2 - Today modern reprocessing techniques lead to materials, which bear the potential to be used as aggregates or additives in mineral building materials. Because of highly sophisticated reprocessing techniques residues with relatively stable composition over a certain range and relatively defined properties can be produced. At the same time, new German and European regulations demand a waste management to decrease waste volume stored at landfills to save natural resources and to enhance sustainable development by recycling of diverse residues. This paper shows the activities of the working group 'Saving Resources by Material Recycling'. T2 - CESB 10 - Central Europe towards Sustainable Building CY - Prague, Czech Republic DA - 2010-06-30 KW - Aggregate KW - Cement KW - Concrete KW - Environment KW - Recycling KW - Residue KW - Sustainability PY - 2010 SN - 978-80-247-3624-2 SP - 437 EP - 440 AN - OPUS4-22442 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maskos, Michael A1 - Krohne, Korinna T1 - Topologically controlled Inter-Polyelectrolyte-Complexes T2 - 8th International Symposium on Polyelectrolytes 2010 (ISP 2010) CY - Shanghai, China DA - 2010-11-14 PY - 2010 AN - OPUS4-22443 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jakubcová, Petra A1 - Schnell, A. A1 - Rübner, Katrin A1 - Müller, A. A1 - Meng, Birgit T1 - Nutzung von Bau- und Abbruchabfällen zur Herstellung von Recyclinggranulaten T2 - Tagung Bauchemie der GDCh-Fachgruppe Bauchemie 2010 CY - Dortmund, Deutschland DA - 2010-10-07 KW - Sekundärrohstoffe KW - Sekundäre Gesteinskörnung KW - Recycling PY - 2010 SN - 978-3-936028-65-2 VL - 42 SP - 129 EP - 136 AN - OPUS4-22444 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - de Oliveira, Rui A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - Michaud, V. T1 - Advanced composite materials with embedded POF sensors for structural health monitoring N2 - A long period grating (LPG) mechanically imprinted in a microstructured polymer optical fibre (mPOF) is embedded in a carbon fibre reinforced polymer (CFRP) unidirectional laminate. Processing steps were established in order to ensure that mPOF does not suffer significant degradation. The strain and temperature responses of the embedded mPOF-LPG were then investigated. T2 - The 19th International Conference on Plastic Optical Fibers CY - Yokohama, Japan DA - 19.10.2010 PY - 2010 AN - OPUS4-22416 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - de Oliveira, Rui A1 - Schukar, Marcus A1 - Wendt, Mario A1 - Witt, Jens T1 - Distributed POF Sensors - Recent Progress and New Challenges T2 - 19th International Conference on POF CY - Yokohama, Japan DA - 2010-10-19 PY - 2010 AN - OPUS4-22417 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Wendt, Mario A1 - Krebber, Katerina T1 - Distributed strain and length change measurement in POF using optical frequency domain reflectometry T2 - 19th International Conference on Plastic Optical Fibers CY - Yokohama, Japan DA - 2010-10-19 PY - 2010 AN - OPUS4-22418 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Krebber, Katerina T1 - Quasi-distributed and dynamic length change measurement in polymer opical fibers T2 - 19th International Conference on Plastic Optical Fibers CY - Yokohama, Japan DA - 2010-10-19 PY - 2010 AN - OPUS4-22419 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schilder, Constanze A1 - Kohlhoff, Harald A1 - Hofmann, Detlef A1 - Habel, Wolfgang T1 - Structure-Integrated Fibre Optic AE Sensor for Concrete Pile Testing and Monitoring T2 - Photonics 2010, International Conference on Fiber Optics and Photonics CY - Guwahati, India DA - 2010-12-11 PY - 2010 AN - OPUS4-22420 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schukar, Vivien A1 - Münzenberger, Sven A1 - Gründer, Klaus-Peter A1 - Habel, Wolfgang T1 - Experimental Validation Technique for Strain Transfer Characterisation of Fibre Bragg Grating based Strain Sensors N2 - This examination deals with the validation faciliy KALFOS and the ESPI reference system. T2 - Photonics 2010, International Conference on Fiber Optics and Photonics CY - Guwahati, India DA - 11.12.2010 PY - 2010 AN - OPUS4-22421 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schweinberger, F. A1 - Meyer-Plath, Asmus T1 - Status of characterization techniques for carbon nanotubes and suggestions towards standards suitable for toxological assessment T2 - NanoSafe 2010 Conference CY - Grenoble, France DA - 2010-11-16 PY - 2010 AN - OPUS4-22423 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mätzner, Olaf T1 - Erfahrugen der Produktinfostelle T2 - Symposium zur EU-Bauproduktenverordnung, Bundesministerium für Verkehr CY - Bonn, Germany DA - 2010-11-16 PY - 2010 AN - OPUS4-22424 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bertovic, Marija T1 - Integration von Human Factors in die Zuverlässigkeitsbetrachtungen T2 - IMQ "Fehlerauffindwahrscheinlichkeit zerstörungsfreier Prüfungen" CY - Crimmitschau, Germany DA - 2010-04-22 PY - 2010 AN - OPUS4-22425 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Oliver A1 - Bredow, Andrea A1 - Erdmann, Kerstin A1 - Berger, Wolfgang T1 - Wet mechanical recycling of thin-film solar cells T2 - 2nd German-Polish Forum on Eco-Innovation: Fostering R & C collaboration for a change CY - Poznan, Poland DA - 2010-11-24 PY - 2010 N1 - Geburtsname von Erdmann, Kerstin: Meißner, K. - Birth name of Erdmann, Kerstin: Meißner, K. AN - OPUS4-22477 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Taffe, Alexander T1 - Zerstörungsfreie Bauwerksdiagnose - Durchführung und Zuverlässigkeit T2 - Symposium der Hochschule München, Bauen im Bestand, Stahlbauten und Mauerwerk, Instandsetzung chloridbelasteter Parkdecks CY - Munich, Germany DA - 2010-11-18 PY - 2010 AN - OPUS4-22478 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert T1 - Non-Destructive Testing in Civil Engineering T2 - Eingeladener Gastvortrag an der Ege Universität Izmir CY - Izmir, Turkey DA - 2010-10-17 PY - 2010 AN - OPUS4-22479 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kannengießer, Thomas A1 - Tiersch, Nico T1 - Comparative study between hot extraction methods and mercury method - a national round robin test KW - Hot extraction KW - Hydrogen KW - ISO 3690 KW - Measurement KW - Mercury KW - Round robin test PY - 2010 SN - 0043-2318 VL - 56 IS - 7 SP - 20 EP - 26 PB - Welding Research Council CY - New York, NY AN - OPUS4-22480 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kannengießer, Thomas A1 - Tiersch, Nico T1 - Measurements of diffusible hydrogen contents at elevated temperatures using different hot extraction techniques - an international round robin test KW - Hot extraction KW - Hydrogen KW - ISO 3690 KW - Measurement KW - Round robin test PY - 2010 SN - 0043-2318 VL - 56 IS - 7 SP - 27 EP - 34 PB - Welding Research Council CY - New York, NY AN - OPUS4-22481 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Korzen, Manfred A1 - Rodrigues, J.P.C. A1 - Correia, A.M. ED - Kodur, V. ED - Franssen, J.-M. T1 - Composite columns made of partially encased steel sections subjected to fire T2 - 6th International conference "Structures in fire" CY - East Lansing, Michigan, USA DA - 2010-06-02 KW - Fire resistance KW - Thermal restraint KW - Composite steel-concrete columns KW - Substructuring method KW - Restraining frame PY - 2010 SN - 978-1-60595-027-3 SP - 341 EP - 348 PB - DEStech Publications, Inc. CY - Lancaster, PA, USA AN - OPUS4-22482 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pirskawetz, Stephan A1 - Weise, Frank A1 - Gorbushina, Anna T1 - Entwicklung und Überprüfung von Einhausungssystemen für außenexponierte Marmorobjekte - Schlossbrückenfigur, Unter den Linden in Berlin T2 - Abschlusskolloquium des DBU-Projekts "Entwicklung und Überprüfung von Einhausungssystemen zur Reduzierung umweltbedingter Schädigungen von außenexponierten Marmorobjekten" CY - Berlin, Germany DA - 2010-10-29 PY - 2010 AN - OPUS4-22483 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter A1 - Schönbucher, A. T1 - Safety aspects of organic peroxide pool fires T2 - COMBURA 2010 - Combustion research and application CY - Maastricht, The Netherlands DA - 2010-10-12 KW - Pool fire KW - Organic peroxides KW - TBPB KW - TBPEH KW - CFD KW - Safety distances PY - 2010 SP - 11 EP - 12 AN - OPUS4-22484 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Olbricht, Jürgen A1 - Klingelhöffer, Hellmuth A1 - Neddemeyer, Torsten A1 - Hünert, Daniela A1 - Schulz, Wencke A1 - Kranzmann, Axel A1 - Skrotzki, Birgit T1 - Combined corrosion-mechanical testing of boiler steels under oxyfuel atmospheres T2 - 3rd Osyfuel Young Researchers Forum, IFK Universität Stuttgart CY - Stuttgart, Germany DA - 2010-10-04 PY - 2010 AN - OPUS4-22446 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krohne, Korinna A1 - Duschner, S. A1 - Störkle, D. A1 - Schmidt, M. A1 - Maskos, Michael T1 - Topologically controlled inter-polyelectrolyte complexes between molecular bottlebrushes and dendrimers N2 - The complexation of a cylindrical polyelectrolyte–brush-surfactant complex (PMMPSS–C12) and an oppositely charged generation-5 PAMAM dendrimer (G5-PAMAM) in methanol (MeOH) leads to kinetically controlled formation of interpolyelectrolyte complexes. In contrast, the complexation of the same starting materials in solvents with higher dielectric constant such as dimethylformamide (DMF) or N-methylformamide (NMF) results in the formation of topologically controlled complexes of cylindrical morphology. The composition of the complexes is analyzed by static and dynamic light scattering (SLS, DLS) in solution and atomic force microscopy (AFM) after spin-casting the complexes onto mica. The analyzed complexes seem to consist of one PMMPSS–C12 molecule and, with increasing G5-PAMAM content, of an increasing number of G5-PAMAM dendrimers. KW - Macromolecules PY - 2010 DO - https://doi.org/10.1021/ma101630h SN - 0024-9297 SN - 1520-5835 VL - 43 IS - 20 SP - 8645 EP - 8650 PB - American Chemical Society CY - Washington, DC AN - OPUS4-22447 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eichler, Thorsten A1 - Isecke, Bernd A1 - Mietz, Jürgen T1 - Einsatz von elektrochemischen Instandsetzungsverfahren (EISV): Systeme und Anwendungsgebiete T2 - Bau und Wissen - Fachveranstaltung Nr. 104681 "Alternative Instandsetzungsverfahren von Stahlbetonbauwerken im Hoch- und Tiefbau" CY - Möriken-Wildegg, Switzerland DA - 2010-11-09 PY - 2010 AN - OPUS4-22449 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eichler, Thorsten A1 - Faulhaber, Armin A1 - Isecke, Bernd T1 - Die sekundären Schutzmechanismen beim KKSB und ihre Bedeutung für die Praxis T2 - 8. Symposium Kathodischer Korrosionsschutz von Stahlbetonbauwerken CY - Ostfildern, Germany DA - 2010-11-18 PY - 2010 AN - OPUS4-22450 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Thoralf A1 - Heyn, Andreas A1 - Bender, S. A1 - Schmidt, J. T1 - Auswahl, Synthese und Charakterisierung von Beschichtungssystemen auf MgCa1,0-Legierungen für Anwendungen temporärer biomedizinischer Implantate T2 - GfKORR-Jahrestagung CY - Frankfurt am Main, Germany DA - 2010-11-09 PY - 2010 AN - OPUS4-22451 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Thoralf A1 - Heyn, Andreas A1 - Burkert, Annette A1 - Ebell, Gino T1 - Erfassung und Analyse der Startvorgänge lokaler Korrosion mittels kombinierter elektrochemischer und mikroskopischer Methoden T2 - GfKORR-Jahrestagung 2010 CY - Frankfurt am Main, Germany DA - 2010-11-09 PY - 2010 AN - OPUS4-22452 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pavlovic, Mato A1 - Boehm, Rainer A1 - Müller, Christina A1 - Pitkänen, J. A1 - Ronneteg, U. T1 - Investigation of the Influence Material Attenuation on the POD of the Flaws as a Part of Multi-Parameter Analysis T2 - 8th International Conference on NDE in Relation to Structural for Nuclear an Pressurised Components CY - Berlin, Germany DA - 2010-09-29 PY - 2010 AN - OPUS4-22453 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pavlovic, Mato A1 - Boehm, Rainer A1 - Müller, Christina A1 - Ronneteg, U. T1 - Investigation of the Influence of the Material Attenuation on the POD of the Flaws as a Part of Multi-parameter Analysis T2 - ASNT 19th Annual Research Symposium and Spring Conference 2010 CY - Williamsburg, VA, USA DA - 2010-03-22 PY - 2010 AN - OPUS4-22454 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Noack, Volker T1 - Sonderschweißverfahren Plasmaschweißen T2 - Schweißfachingenieur-Lehrgang CY - Berlin, Germany DA - 2010-03-25 PY - 2010 AN - OPUS4-22455 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lischka, Susanne A1 - Nehls, Irene A1 - Piechotta, Christian T1 - Development of certified isotopic calibrants for the analysis of organic arsenic species with LC-ESI-MS T2 - The Future of Reference Materials - Science and Innovation CY - Geel, Belgium DA - 2010-11-23 PY - 2010 AN - OPUS4-22456 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Klyk-Seitz, Urszula-Anna A1 - Cossmer, Antje A1 - Nehls, Irene T1 - Determination of Tributyltin (TBT) at Sub-ppt Level in Whole Water Samples T2 - The Future of Reference Materials - Science and Innovation - IRMM CY - Geel, Belgium DA - 2010-11-23 PY - 2010 AN - OPUS4-22457 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Noske, Reinhard A1 - Stolle, Dirk A1 - Juritsch, Elevtheria A1 - Subaric-Leitis, Andreas T1 - Sprengstoff - Detektion mit Sensoren T2 - elmug4future, Technologiekonferenz mit Kooperationsbörse CY - Suhl, Germany DA - 2010-06-22 PY - 2010 AN - OPUS4-22458 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Subaric-Leitis, Andreas A1 - Fischer, Michael A1 - Kohlhoff, Harald T1 - Aspekte der Prüfung und Kalibrierung von Martenshärteprüfgeräten im Makrobereich T2 - VMPA-Arbeitskreis Prüfmaschinen und Prüfgeräte CY - Oberaula, Germany DA - 2010-06-17 PY - 2010 AN - OPUS4-22459 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Subaric-Leitis, Andreas A1 - Gründer, Klaus-Peter A1 - Hofmann, Detlef A1 - Künecke, Georgia A1 - Schöne, Dieter T1 - Verformungsverhalten eines Druckkraftmessflansches T2 - VMPA-Arbeitskreis Prüfmaschinen und Prüfgeräte CY - Oberaula, Germany DA - 2010-06-17 PY - 2010 AN - OPUS4-22460 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Subaric-Leitis, Andreas T1 - Grundlagen und Verfahren zur Messunsicherheitsbestimmung T2 - Werkstoffmechanisches Kolloquium der TU Darmstadt CY - Darmstadt, Germany DA - 2010-10-05 PY - 2010 AN - OPUS4-22461 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Subaric-Leitis, Andreas A1 - Schwenk, D. T1 - Characteristic Quality Parameters of Measurement - Verification and Calibration of Material Testing Machines T2 - IMEKO 2010 TC3, TC5 and TC22 Conferences CY - Pattaya, Thailand DA - 2010-11-22 PY - 2010 AN - OPUS4-22462 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schwenk, D. A1 - Subaric-Leitis, Andreas T1 - Qualitätskennzahlen bei der Prüfung und Kalibrierung von Werkstoffprüfmaschinen T2 - Tagung Werkstoffprüfung 2010 der DGM CY - Neu-Ulm, Germany DA - 2010-12-02 PY - 2010 AN - OPUS4-22463 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Molnarne, Maria A1 - Schröder, Volkmar T1 - Comparison of flammability and oxidizing power of gas mixtures using the ISO 10156 with measured flammability data T2 - 13th Annual symposium, Mary Kay O´Connor process safety center "Beyond regulatory compliance: making safety second nature" CY - College Station, Texas, USA DA - 2010-10-26 KW - Flammability KW - Fire KW - Explosion limits KW - International standards PY - 2010 SN - 978-0-615-38129-9 SP - 230 EP - 246 AN - OPUS4-22465 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina T1 - Zuverlässigkeit zerstörungsfreier Prüfungen T2 - Zuverlässigkeit zerstörungsfreier Prüfungen CY - Berlin, Germany DA - 2010-05-17 PY - 2010 AN - OPUS4-22426 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pavlovic, Mato A1 - Müller, Christina A1 - Spokoiny, V. T1 - Multiparameter-POD Analyse T2 - 3. GMA-Expertenforum "Neue Entwicklungen in der Messdatenauswertung und Messunsicherheitsbestimmung" CY - Vienna, Austria DA - 2010-03-10 PY - 2010 AN - OPUS4-22427 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Golze, Manfred T1 - Auswertung der Messunsicherheit von Analysenergebnissen T2 - GDCH-Tagung CY - Frankfurt am Main, Germany DA - 2010-10-27 PY - 2010 AN - OPUS4-22428 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Golze, Manfred T1 - Rückführung mittels Referenzmaterialien T2 - GDCH-Tagung CY - Frankfurt am Main, Germany DA - 2010-10-27 PY - 2010 AN - OPUS4-22429 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bertovic, Marija A1 - Müller, Christina A1 - Fahlbruch, B. A1 - Ronneteg, U. A1 - Pitkänen, J. T1 - Human Factors in Non-Destructive Testing (NDT): First step in Approaching the Challenge. Nuclear Waste Management in Sweden and Finland. T2 - ICAP CY - Melbourne, Australia DA - 2010-07-15 PY - 2010 AN - OPUS4-22430 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Golze, Manfred T1 - Measurement uncertainty amd compilance with specifications T2 - EURLAB Workshop CY - Brussels, Belgium DA - 2010-10-20 PY - 2010 AN - OPUS4-22431 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bertovic, Marija A1 - Müller, Christina A1 - Fahlbruch, B. A1 - Pitkänen, J. A1 - Ronneteg, U. T1 - Human Factors Approach to the Reliability T2 - 8th International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurised Components CY - Berlin, Germany DA - 2010-09-29 PY - 2010 AN - OPUS4-22432 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Rübner, Katrin A1 - Kühne, Hans-Carsten T1 - Einflüsse der Mischungszusammensetzung auf die Porenstruktur von Instandsetzungsmörteln T2 - XV. Workshop über die Charakterisierung von feinteiligen und porösen Festkörpern (Porotec-Workshop) CY - Bad Soden, Germany DA - 2010-11-16 PY - 2010 AN - OPUS4-22433 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lexow, Jürgen T1 - Research for standards in Germany - BAM Federal institute for materials research and testing T2 - Seminar der tschechischen technischen werkstoffwissenschaftlichen Technologieplattform im CSVTS CY - Prague, Czech Republic DA - 2010-11-03 PY - 2010 AN - OPUS4-22435 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bohse, Jürgen T1 - DGZfP-Fachausschuss Schallemissionsprüfverfahren - Historie und Bilanz (anlässlich der 50. Sitzung des FA) T2 - 50. Sitzung de DGZfP-FA SEP, TÜV Forum Wien CY - Vienna, Austria DA - 2010-09-07 PY - 2010 AN - OPUS4-22646 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stoppel, Markus A1 - Wiggenhauser, Herbert A1 - Taffe, Alexander A1 - Kurz, J.H. A1 - Reichling, K. T1 - Zustandsermittlung und Schadensdiagnose für Parkhäuser mit automatisierten zerstörungsfreien Prüfverfahren T2 - 4. Kolloquium Verkehrsbauten, TA Esslingen CY - Ostfildern, Germany DA - 2010-02-02 PY - 2010 AN - OPUS4-22650 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Berger, Anka A1 - Wehrstedt, Klaus-Dieter T1 - Azodicarboxylates: Explosive properties and DSC measurements N2 - A large number of azodicarboxylates and their derivatives are produced and used in the chemical industries. The versatile applications of these azodicarboxylates in research institutes and in the chemical industries for chemical synthesis arouse additional hazards. The intent of this paper is to obtain first knowledge about the structure–response relationship regarding the explosive properties and the thermal hazards of different versatile used azodicarboxylates. The substances are examined with the differential scanning calorimetry (DSC). Furthermore, different laboratory test methods, based on the UN Recommendations on the Transport of Dangerous Goods, are applied to determine the explosive properties of the mentioned substances. On the basis of the obtained results, the known influence of the nitrogen content within the molecule regarding their thermal behaviour could be confirmed. The measured heat of decomposition appeared to be proportional to the nitrogen content within the group of the aliphatic and the aromatic azodicarboxylates. To emphasize this dependency, further investigations should be done. The long term objective of this research is to develop structure–response relationships of the explosive properties and the thermal hazards originating from azodicarboxylates. KW - Azodicarboxylates KW - Thermal decomposition KW - Differential scanning calorimetry (DSC) KW - Explosive properties PY - 2010 DO - https://doi.org/10.1016/j.jlp.2010.06.019 SN - 0950-4230 SN - 1873-3352 VL - 23 IS - 6 SP - 734 EP - 739 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-22652 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kannengießer, Thomas A1 - Kromm, Arne A1 - Brauser, Stephan T1 - Synchrotron diffraction for visualization of solid state phase transformations T2 - VISUAL-JW 2010 - The international symposium on visualization in joining & welding science through advanced measurements and simulation CY - Osaka, Japan DA - 2010-11-11 KW - Synchrotron KW - EDXRD KW - Martensite KW - Residual stress KW - TRIP steel KW - Phase transformation PY - 2010 IS - MTJW-1 SP - 123 EP - 124 AN - OPUS4-22653 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hedrich, Martina T1 - Tracebility of Measurement Results T2 - TrainMiC-Kurs "Training of New Trainers" CY - Geel, Belgium DA - 2010-03-24 PY - 2010 AN - OPUS4-22654 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Österle, Werner A1 - Bresch, Harald A1 - Dörfel, Ilona A1 - Fink, C. A1 - Giese, A. A1 - Prietzel, Claudia A1 - Seeger, Stefan A1 - Walter, J. T1 - Examination of airborne brake dust T2 - JEF 2010 - 6th European conference on braking CY - Lille, France DA - 2010-11-24 KW - Brake dust KW - Nanoparticles KW - Size-distribution PY - 2010 SP - 1 EP - 6(?) AN - OPUS4-22655 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Köppen, Robert A1 - Koch, Matthias A1 - Emmerling, Franziska A1 - Nehls, Irene T1 - rac-(1R,2R,4S)-1,2-Dibromo-4-[(1R)-1,2-dibromoethyl]cyclohexane N2 - In the title compound, C8H12Br4, the cyclohexane ring exhibits a chair conformation. The C-Br distances range from 1.964 (6) to 1.985 (5) Å and the C-C distances range from 1.496 (6) to 1.543 (7) Å. Short intermolecular BrBr contacts [3.467 (4) Å] occur in the crystal. PY - 2010 DO - https://doi.org/10.1107/S160053681004763X SN - 1600-5368 VL - 66 IS - 12 SP - o3318,sup-1 - o3318,sup-7 PB - Munksgaard CY - Copenhagen AN - OPUS4-22616 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Milmann, Boris A1 - Krause, Martin A1 - Mielentz, Frank A1 - Mayer, K. T1 - Improvement of the near field resolution of ultrasound probes T2 - 10th European Conference on NDT (ECNDT) CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-22619 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krietsch, Arne A1 - Scheid, Marc A1 - Lasry, M. A1 - Suter, G. A1 - Teske, H.-J. A1 - Stahmer, K.W. A1 - Arnold, A. A1 - Nemcak, O. A1 - Cesana, C. A1 - Siwek, R. ED - Suter, G. ED - de Rademaeker, E. T1 - Validation of alternative igniters for the determination of explosion characteristics of dust clouds in 20-l-sphere and 1-m³-vessel T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - Brenn- und Explosionskenngrößen KW - Bestimmungsmethoden KW - 20-l-Kugel KW - 1-m³-Behälter PY - 2010 SN - 978-90-76019-291 VL - 2 SP - 227 EP - 233 CY - Brugge, Belgium AN - OPUS4-22620 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schoßig, Jörg A1 - Schmidt, Martin A1 - Krause, Ulrich A1 - Steinbach, J. T1 - Beurteilung des Selbstentzündungsverhaltens brennbarer Stäube mit Hilfe adiabatischer Warmlagerung T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Anlagensicherheit KW - Umweltschutz KW - Sicherheitstechnik KW - Explosionsschutz PY - 2010 SN - 978-3-89746-119-2 SP - 1 EP - 7(?) CY - Frankfurt/M. AN - OPUS4-22621 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ballhause, Tony A1 - Niederleithinger, Ernst A1 - Feldmann, Rüdiger A1 - Bohlen, T. T1 - Möglichkeiten zur verbesserten Längenbestimmung von Pfählen unter schwierigen Randbedingungen mit einem Mehrkanal-Messsystem T2 - 70. Jahrestagung der Deutschen Geophysikalischen Gesellschaft (DGG) CY - Bochum, Germany DA - 2010-03-15 PY - 2010 AN - OPUS4-22623 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cristol-Bulthé, A.-L. A1 - Österle, Werner T1 - Multiscale characterisation of coupling between contact localisation and friction mechanisms T2 - 6th European Conference on Braking CY - Lille, France DA - 2010-11-24 PY - 2010 AN - OPUS4-22679 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie A1 - Milmann, Boris ED - Frangopol, D. ED - Sause, R. ED - Kusko, C. T1 - Contribution on non-destructive defect detection to bridge management T2 - IABMAS 2010 - Bridge maintenance, safety, management and life-cycle optimization CY - Philadelphia, PA, USA DA - 2010-07-11 KW - Ultrasonic measurement KW - Transversal waves KW - Bond defect KW - Defect detection KW - Concrete structures KW - Debonded area visualisation PY - 2010 SN - 978-0-415-87786-2 SP - 1 EP - 8(?) PB - CRC Press AN - OPUS4-22680 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hauswaldt, Sebastian A1 - Korzen, Manfred T1 - A constitutive model for use in finite element simulations in structural fire design T2 - 11th International symposium on fire protection CY - Leipzig, Germany DA - 2010-06-08 KW - Steel KW - Fire KW - Constitutive model KW - Eurocode KW - Creep KW - Finite element simulation KW - ABAQUS KW - UMAT KW - Deformation theory of plasticity PY - 2010 SP - 1 EP - 9(?) AN - OPUS4-22683 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lenke, Philipp A1 - Wendt, Mario A1 - Liehr, Sascha A1 - Krebber, Katerina T1 - The impact of temperature and humidity on the backscatter profile of PMMA POF N2 - In this paper the influence of combined temperature and strain changes as well as changes of moisture content on polymer optical fibers made of polymethyl methacrylat (PMMA) is investigated. The increase of the scattering coefficient with increasing temperature for various strain levels is observed and quantified. The measurement results of influence of humidity on scattering intensity of PMMA-POF encourage to porpose these as a distributed humidity sensor. T2 - POF 2010 - 19th International conference on plastic optical fibers CY - Yokohama, Japan DA - 2010-10-19 KW - POF distributed sensing Rayleigh KW - Humiditiy KW - OTDR KW - Strain PY - 2010 SP - 1 EP - 7(?) AN - OPUS4-22685 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dreßler, Martin A1 - Nofz, Marianne A1 - Klobes, Peter A1 - Dörfel, Ilona A1 - Reinsch, Stefan T1 - Differences between films and monoliths of sol-gel derived aluminas N2 - This work compares thin layers (films) and monoliths prepared from alumina sols with respect to their microstructure, thermal evolution, porosity and specific surface area. After heat treatment at similar temperatures, films and monoliths showed the same qualitative changes in porosity and specific surface area. However, some marked quantitative differences were detected. Film fragments had a lower open porosity, a lower specific surface area and a narrower pore size distribution. Furthermore, the thermal evolution showed a markedly different burnout of organic components between films and monoliths. The observed differences between films and monolith can be explained by the ageing history of the sols during sample preparation. KW - Sol-gel processing KW - Alumina KW - Phase transitions KW - Porosity PY - 2010 DO - https://doi.org/10.1016/j.tsf.2010.07.057 SN - 0040-6090 VL - 519 IS - 1 SP - 42 EP - 51 PB - Elsevier CY - Amsterdam AN - OPUS4-22606 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Maierhofer, Christiane A1 - Kohl, Christoph A1 - Wöstmann, Jens ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Combining the results of various non-destructive evaluation techniques for reinforced concrete: data fusion KW - Non-destructive testing KW - Concrete KW - Data fusion KW - Radar KW - Ultrasonic techniques PY - 2010 SN - 978-1-84569-950-5 VL - 2 IS - Chapter 5 SP - 95 EP - 107 PB - Woodhead Publ. AN - OPUS4-22607 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Krankenhagen, Rainer T1 - Integration of active thermography into the assessment of cultural heritage buildings N2 - Applications of infrared thermography in civil engineering are not limited to the identification of heat losses in building envelopes. Active infrared thermography methods enable structural investigations of building elements with one-sided access up to a depth of about 10 cm. Masonry and especially historical masonry has a very heterogeneous structure containing several different materials (brick, stone, mortar, plaster, wood, metal, etc.) with various thermal properties. As many classes of damage originate from defects that are close to the surface, active thermography is in general very well suited to assessing different test problems in cultural heritage buildings. In this paper, the physical background, equipment, environmental influences and material properties are discussed. Several application results are presented. It is shown how active thermography can be integrated into a holistic approach for the assessment of historical structures. KW - Active thermography KW - Impulse KW - Lock-in KW - Historical structure KW - Thermal properties PY - 2010 DO - https://doi.org/10.1080/09500341003703497 SN - 0950-0340 VL - 57 IS - 18 SP - 1790 EP - 1802 PB - Taylor & Francis CY - Abingdon AN - OPUS4-22608 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Manke, I. A1 - Kardjilov, N. A1 - Schäfer, R. A1 - Hilger, A. A1 - Strobl, M. A1 - Dawson, M. A1 - Grünzweig, C. A1 - Behr, G. A1 - Hentschel, Manfred P. A1 - David, C. A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Banhart, J. T1 - Three-dimensional imaging of magnetic domains N2 - Magnetic domains have been the subject of much scientific investigation since their theoretical existence was first postulated by P.-E. Weiss over a century ago. Up to now, the three-dimensional (3D) domain structure of bulk magnets has never been observed owing to the lack of appropriate experimental methods. Domain analysis in bulk matter thus remains one of the most challenging tasks in research on magnetic materials. All current domain observation methods are limited to studying surface domains or thin magnetic films. As the properties of magnetic materials are strongly affected by their domain structure, the development of a technique capable of investigating the shape, size and distribution of individual domains in three dimensions is of great importance. Here, we show that the novel technique of Talbot-Lau neutron tomography with inverted geometry enables direct imaging of the 3D network of magnetic domains within the bulk of FeSi crystals. KW - Computed tomography KW - Reconstruction algorithm KW - Talbot-Lau neutron tomography KW - Magnetic domains PY - 2010 DO - https://doi.org/10.1038/ncomms1125 SN - 2041-1723 SP - 1 EP - 6 PB - Nature Publishing Group CY - London, UK AN - OPUS4-22609 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Maierhofer, Christiane ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Planning a non-destructive test programme for reinforced concrete structures KW - Non-destructive testing KW - Concrete KW - On-site assessment KW - Method validation KW - Quality assurance PY - 2010 SN - 978-1-84569-950-5 VL - 2 IS - Chapter 1 SP - 3 EP - 13 PB - Woodhead Publ. AN - OPUS4-22610 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Schlichting, Joachim ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Active thermography for evaluation of reinforced concrete structures KW - Active thermography KW - Pulse-phase thermography KW - Emissivity KW - Reinforced concrete KW - Subsurface defects PY - 2010 SN - 978-1-84569-950-5 VL - 2 IS - Chapter 17 SP - 370 EP - 402 PB - Woodhead Publ. AN - OPUS4-22611 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Quercetti, Thomas A1 - Nakagami, M. A1 - Komatsuki, S. A1 - Musolff, André A1 - Müller, Karsten A1 - Droste, Bernhard A1 - Fujisawa, K. T1 - Disposal container safety assessment - drop tests with 'Yoyushindo-disposal' waste container onto concrete target N2 - This paper presents technical details of the drop test performance as well as some experimental results of tests carried out with the Japanese 'Yoyushindo-Disposal' waste container for intermediate depth disposal. The drop test program comprised three single 8 m drop tests at the specimen's corner edge orientation onto a concrete slab. The slab was connected to the unyielding IAEA target of the BAM's 200 t drop test facility. The three tested specimens had masses between 20 000 and 28 000 kg depending on their content mass. The tests were accompanied by various metrology, such as strain and deceleration measurements, optical three-dimensional deformation methods, leak tightness testing and test installation for potential particle release measurements to collect a set of data for establishing a basis for safety assessment. KW - Drop test KW - Disposal container KW - Safety PY - 2010 DO - https://doi.org/10.1179/174650910X12681251630291 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 21 IS - 3 SP - 132 EP - 141 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-22613 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Quiroz Penaranda, Vanessa A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Laser beam weldability of austenitic and austenitic-ferritic high-manganese stainless steel sheets T2 - 63rd IIW Annual Assembly and International Conference CY - Istanbul, Turkey DA - 2010-07-12 KW - Manganese alloyed stainless steels KW - Laser beam welding KW - Weldability KW - Shielding gas KW - Weld metal KW - Corrosion resistance KW - Mechanical properties PY - 2010 IS - IIW Doc.-No. IV-1023-10 SP - 1 EP - 13 AN - OPUS4-22615 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Schiller, M. A1 - Mecke, R. A1 - Seidl, T. A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Kalisch, U. A1 - Meinhardt, J. A1 - Hennen, C. T1 - Fallbeispiele für die Anwendung der 3D-Messtechnik und der aktiven Thermografie in der Denkmalpflege T2 - 4. Konservierungswissenschaftliches Kolloquium - Zerstörungsfreie Oberflächenuntersuchungsmethoden - Stand der Technik, Grenzen und Ausblicke CY - Potsdam, Deutschland DA - 2010-10-29 KW - Historisches Mauerwerk KW - Aktive Thermografie KW - 3D-Laserscanner KW - Datenfusion KW - Monitoring PY - 2010 SN - 978-3-88462-305-3 IS - Kap. 3 SP - 26 EP - 31 PB - Wernersche Verlagsgesellschaft AN - OPUS4-22636 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Kalisch, U. T1 - Qualifizierung und Vergleich zerstörungsfreier Prüfverfahren an historischem Mauerwerk: Messungen an Probekörpern und Fallstudien T2 - 4. Konservierungswissenschaftliches Kolloquium - Zerstörungsfreie Oberflächenuntersuchungsmethoden - Stand der Technik, Grenzen und Ausblicke CY - Potsdam, Deutschland DA - 2010-10-29 KW - Historisches Mauerwerk KW - Aktive Thermografie KW - Radar KW - Validierung PY - 2010 SN - 978-3-88462-305-3 IS - Kap. 1 SP - 9 EP - 15 PB - Wernersche Verlagsgesellschaft AN - OPUS4-22637 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schönhals, Andreas A1 - Frunza, S. A1 - Frunza, L. A1 - Unruh, T. A1 - Frick, B. A1 - Zorn, R. T1 - Vibrational and molecular dynamics of a nanoconfined liquid crystal N2 - The effect of a nanometer confinement on the vibrational and molecular dynamics of a liquid crystals E7 was studied by dielectric spectroscopy (DS) and neutron scattering (NS). E7 undergoes a glass transition phenomenon besides the nematic to isotropic phase transition. As confining host a molecular sieve of the MCM-41 type is used having cylindrical pores with a radius of 1.25 nm. The results obtained by both methods are compared in detail. PY - 2010 DO - https://doi.org/10.1140/epjst/e2010-01329-5 SN - 1951-6355 SN - 1951-6401 VL - 189 IS - 1 SP - 251 EP - 255 PB - Springer CY - Berlin AN - OPUS4-22638 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Wehrstedt, Klaus-Dieter T1 - Evaluative comparison of two methods for SADT determination (UN H.1 and H.4) N2 - We present our results on the comparison of two methods for the SADT determination. Both methods, UN test H.1 and UN test H.4 are recommended by the international transport regulations from the UN. But during the last years the applicability of the UN test H.4 has been questioned for solid substances. Therefore, three organic peroxides and one self-reactive substance have been investigated in 5 kg and 20 kg packages as well as in the UN test H.4 in a 500 mL Dewar vessel. The SADT values determined with the different methods match. The UN test H.4 seems to be well suited for solid organic peroxides and self-reactive substances of at least 20 kg or 60 L. KW - Thermal explosion KW - Organic peroxides KW - Self-reactive substances KW - SADT KW - Heat accumulation storage test KW - US SADT test PY - 2010 DO - https://doi.org/10.1016/j.jlp.2010.06.014 SN - 0950-4230 SN - 1873-3352 VL - 23 IS - 6 SP - 740 EP - 744 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-22640 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ulrich, Armin A1 - Braun, F. T1 - Neues zum Thema Tanks - Änderungen in RID/ADR 2011 KW - Gefahrgut KW - Tanks KW - RID/ADR 2011 PY - 2010 SN - 0941-6080 VL - 20 IS - 5 SP - 34 EP - 38 PB - Verl. TÜV Rheinland CY - Köln AN - OPUS4-22641 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Shokouhi, Parisa A1 - Zoëga, Andreas A1 - Wiggenhauser, Herbert ED - Thompson, D.O. ED - Chimenti, D.E. T1 - Nondestructive evaluation of damage in concrete under uniaxial compression N2 - Surface wave velocities over the sonic frequency range (<20 KHz) were measured on concrete specimens undergoing various cycles of loading and unloading. Acoustic Emission test (AE) was conducted simultaneously to monitor the microcracking activities. The sonic surface wave velocity was found to be highly stress-dependent. The observed changes in surface wavespeed are repeatable and follow a particular trend. By measuring the wave velocities in both loading and unloading phases, the effects of stress and stress-induced damages could be distinguished. The observed trend could be explained by a combination of acoustoelasticity and microcracking theories. T2 - 36th Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Kingston, RI, USA DA - 2009-07-26 KW - Nondestructive testing (NDT) KW - Microcracking KW - Sonic wave velocity KW - Concrete KW - Load KW - Stress PY - 2010 UR - http://link.aip.org/link/?APCPCS/1211/1525/1 SN - 978-0-7354-0748-0 SN - 0743-0760 SN - 0094-243X N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings SP - 1525 EP - 1532 CY - Melville, NY AN - OPUS4-22642 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Deponieabdichtungen - Zulassungen der BAM Bundesanstalt für Materialforschung und -prüfung T2 - Veranstaltung im Rahmen des Jahresfortbildungsprogramms für die Niedersächsische Gewerbeaufsichtsverwaltung (GAV) 2010: Spezialthemen der Deponiegenehmigung und -überwachung CY - Hildesheim, Germany DA - 2010-11-24 PY - 2010 AN - OPUS4-22643 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bohse, Jürgen T1 - Schallemissionsmessungen an Bauteilen aus Composite-Werkstoffen mit Polymermatrix T2 - Sitzung DGZfP-AK Berlin CY - Berlin, Germany DA - 2010-11-02 PY - 2010 AN - OPUS4-22644 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bohse, Jürgen T1 - Schallemissionsprüfung (AT) von Composite-Druckbehältern T2 - Gemeinsame Sitzung der DGZfP-FA SHM + FA SEP CY - Braunschweig, Germany DA - 2010-04-20 PY - 2010 AN - OPUS4-22645 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang T1 - Faseroptische Sensorik - ihr Potential für das Monitoring von Verkehrsanlagen T2 - IVA der TU Braunschweig CY - Braunschweig, Germany DA - 2010-11-12 PY - 2010 AN - OPUS4-22596 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang T1 - Fasersensorik-Schwerpunkte und -Aktivitäten in der Bundesanstalt für Materialforschung und -prüfung T2 - FITR e.V. CY - Weimar, Germany DA - 2010-02-10 PY - 2010 AN - OPUS4-22597 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Daum, Werner T1 - Bedarf an Monitoringsystemen im Spiegelbild aktueller Schadensfälle T2 - Erfahrungsaustausch zwischen Forschungseinrichtungen/Industrie/Behörden zum Thema "Vorwarnsysteme für Bauwerke" CY - Berlin, Germany DA - 2010-04-08 PY - 2010 AN - OPUS4-22598 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang T1 - Guidelines for the characterization and use of fibre optic sensors T2 - COST 299 Meeting CY - Cluj-Napoca, Romania DA - 2010-03-16 PY - 2010 AN - OPUS4-22599 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Alterungsvorgänge durch Bewitterung bei Beschichtungen und deren Untersuchung und Prüfung T2 - 42. Fortbildungskurs SAH - Holzoberflächen in der Fassadengestaltung CY - Weinfelden, Schweiz DA - 2010-10-26 KW - Bewitterung KW - Alterung KW - Holz PY - 2010 SN - 978-3-906703-26-8 SP - 29 EP - 38 CY - Zürich, Schweiz AN - OPUS4-22601 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Feigl, Michael A1 - Nofz, Marianne A1 - Sojref, Regine A1 - Kohl, Anka T1 - Improved wetting of bare and pre-coated steels by aqueous alumina sols for optimum coating success N2 - Alumina coatings are a promising candidate for the protection of metals prone to high temperature corrosion. If applied via sol–gel process, especially by using so called aqueous modified Yoldas-sols, the deposition is hardened by differences in surface free energy of substrate and sol. In this paper the apparent surface properties of samples to be coated and sols were examined by contact angle measurements, IR-spectroscopy and tensiometry. The results imply, after consideration of possible uncertainties, the use of surface tension reducing 2-butanol already present during hydrolysis of the sols to obtain an easy and successful coating process. KW - Sol-gel KW - Wetting KW - Coating KW - IR-spectroscopy PY - 2010 DO - https://doi.org/10.1007/s10971-010-2232-7 SN - 0928-0707 SN - 1573-4846 VL - 55 IS - 2 SP - 191 EP - 198 PB - Kluwer Academic Publ. CY - Dordrecht AN - OPUS4-22602 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bletzer, Claus W. A1 - Zencker, Uwe A1 - Völzke, Holger A1 - Nehrig, Marko T1 - Strategien zur Bestimmung von Temperaturen von Transport- und Lagerbehältern für radioaktive Stoffe T2 - Jahrestagung Kerntechnik 2010 CY - Berlin, Deutschland DA - 2010-05-04 KW - Temperaturprofil KW - Transportbehälter KW - Radioaktive Stoffe PY - 2010 IS - Section 5 / Paper 514 SP - 1 EP - 6 CY - Berlin AN - OPUS4-22604 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stempniewski, L. A1 - Münich, C. A1 - Urban, M. A1 - Messervey, T. A1 - Zangani, D. A1 - Liehr, Sascha A1 - Sasek, L. ED - Mufti, A. ED - Banthia, N. T1 - Shaking table test of a two-storey stone masonry building reinforced with multifunctional textiles T2 - CSHM-3 - Conservation of heritage structures: using FRM and SHM CY - Ottawa, Canada DA - 2010-08-11 KW - Multiaxial textile KW - Fiber reinforced cement KW - Fiber matrix system KW - Shaking table tests KW - Polymer optical fibre KW - Fiber Bragg gratings PY - 2010 SN - 978-0-88865-883-8 SP - 71 EP - 81 CY - Vancouver, Canada AN - OPUS4-22605 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Jechow, Mirko A1 - Fratzscher, Daniel A1 - Wrobel, Norma A1 - Zscherpel, Uwe A1 - Ewert, Uwe A1 - Bücherl, T. A1 - Hasenstab, A. A1 - Tannert, T. A1 - Weiss, C. A1 - Weiss, P. T1 - Strukturmerkmale im Holz - radiologisch gesehen T2 - DGZfP-Jahrestagung 2010, ZfP in Forschung, Entwicklung und Anwendung CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-22626 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Staude, Andreas A1 - Ehrig, Karsten A1 - Schulze, Matthias A1 - Neugebauer, M. A1 - Meeß, R. A1 - Brzoska, J. A1 - Jung, A. T1 - Der Einfluss unterschiedlicher Materialzusammensetzungen auf das dimensionelle Messen von Mikroobjekten mittels µCT T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 UR - http://www.ndt.net/article/dgzfp2010/Inhalt/di2a4.pdf AN - OPUS4-22627 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ewert, Uwe A1 - Zscherpel, Uwe A1 - Bavendiek, K. T1 - Prüfung mit digitalen Detektoren (DDA) nach Norm - worauf kommt es an? T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-22628 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eichler, Thorsten A1 - Isecke, Bernd T1 - Investigations on the impact of decreasing chloride concentration on the corrosion state of reinforcing steel in alkaline environment T2 - EUROCORR 2010 CY - Moscow, Russia DA - 2010-09-13 PY - 2010 AN - OPUS4-22629 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Rücker, Werner T1 - Integrated structural risk assessment for offshore wind turbines T2 - IRIS Summer Academy 2010 CY - Zell am See, Austria DA - 2010-09-12 PY - 2010 AN - OPUS4-22630 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Rücker, Werner T1 - Utilization of Monitoring and Damage Detection Procedures for Risk Optimization and Operation Support. T2 - IRIS Week 2010 CY - Vienna, Austria DA - 2010-11-10 PY - 2010 AN - OPUS4-22631 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ewert, Uwe A1 - Heyne, Klara A1 - Zscherpel, Uwe A1 - Jechow, Mirko T1 - Ein neues Konzept zur Bestimmung der optimalen Röntgenspannung für die ZfP mit digitaler Radiographie T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-22632 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jechow, Mirko A1 - Beckmann, Jörg A1 - Ewert, Uwe A1 - Przybilla, Waldemar A1 - Redmer, Bernhard A1 - Zscherpel, Uwe T1 - Die richtige Auswahl von Vorder- und Hinterfolien für die Computer-Radiographie mit Speicherfolien T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-22633 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Rübner, Katrin A1 - Kühne, Hans-Carsten T1 - Einflüsse der Mischungszusammensetzung auf die Porenstruktur von Instandsetzungsmörteln N2 - Untersucht wurde der Einfluss der Applikationsart (konventionelle und gespritzte Herstellung, Wasserlagerung bis zur Prüfung), der Einfluss von Fasern (konventionelle Herstellung, Wasserlagerung bis zur Prüfung) und der Einfluss von Schwindreduzierern (konventionelle Herstellung, Luftlagerung bis zur Prüfung). T2 - XV. Workshop über die Charakterisierung von feinteiligen und porösen Festkörpern (Porotec-Workshop) CY - Bad Soden, Germany DA - 16.11.2010 PY - 2010 AN - OPUS4-22634 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pulz, Robert A1 - Rehmer, Birgit T1 - Laser Thermal Shock Experiments - Performance and Evaluation on the Basis of Advanced Ceramics T2 - ICC 3 CY - Osaka, Japan DA - 2010-11-17 PY - 2010 AN - OPUS4-22635 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dmitriev, A.I. A1 - Österle, Werner A1 - Kloß, Heinz T1 - Nano-scale modeling of pad-disc interface. The influence of copper as a pad ingredient. T2 - JEF 2010 - 6th European conference on braking CY - Lille, France DA - 2010-11-24 KW - Friction layer KW - Copper particles KW - MCA-modelling PY - 2010 SP - 1 EP - 6(?) AN - OPUS4-22656 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Resch-Genger, Ute A1 - Behnke, Thomas A1 - Würth, Christian A1 - Pauli, Jutta A1 - Hoffmann, Katrin A1 - Grabolle, Markus A1 - Hennig, Andreas A1 - Brehm, Robert A1 - Spieles, Monika T1 - Functional Chromophores, Signal Enhancemant and Multiplexing Strategies and Absolute Fluorescence Measurement T2 - eingeladender Vortrag, Seminar AK Enderlein und Laserlabor Göttingen CY - Göttingen, Germany DA - 2010-11-24 PY - 2010 AN - OPUS4-22658 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Wencke A1 - Nofz, Marianne A1 - Kranzmann, Axel T1 - Performance on Protection Coatings during Oxyfuel Combustion Condition T2 - 3rd Oxyfuel Young Researchers Forum CY - Stuttgart, Germany DA - 2010-10-04 PY - 2010 AN - OPUS4-22659 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Resch-Genger, Ute A1 - Behnke, Thomas A1 - Würth, Christian A1 - Hoffmann, Katrin A1 - Grabolle, Markus A1 - Lochmann, Cornelia T1 - Design of Fluorescent (Nano)Particles - Specroscopic Characterization and Application for Biomarker Analysis T2 - Optical Imaging Workshop CY - Göttingen, Germany DA - 2010-11-25 PY - 2010 AN - OPUS4-22660 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pauli, Jutta A1 - Grabolle, Markus A1 - Brehm, Robert A1 - Resch-Genger, Ute A1 - Hamann, F. A1 - Hilger, A. T1 - Influence of the Dimerization of Fluorescent Dyes on the Spectroscopic Properties of their lgG Conjugates T2 - Molekulare Bildgebung 10 (MOBI10) CY - Seeon-Seebruck, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-22661 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Resch-Genger, Ute A1 - Behnke, Thomas A1 - Würth, Christian A1 - Hoffmann, Katrin A1 - Hennig, Andreas A1 - Pauli, Jutta A1 - Grabolle, Markus A1 - Lochmann, Cornelia A1 - Brehm, Robert T1 - From Funcional Chromophores to Fluorescence Standards: Fluorescence Spectroscopy at BAM T2 - Institutskolloquium CY - Münster, Germany DA - 2010-10-20 PY - 2010 AN - OPUS4-22662 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beckmann, Jörg A1 - Ewert, Uwe A1 - Berndt, Anja A1 - Strebl, F. A1 - Schmidt, R. T1 - Standardization and Certification in the Area of CBRN T2 - "EU Security Research - Achievements & Lessons Learned", organised by the Centre for Strategy & Evaluation Services (CSES) CY - Brussels, Belgium DA - 2010-11-30 PY - 2010 AN - OPUS4-22663 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beckmann, Jörg A1 - Ewert, Uwe A1 - Berndt, Anja A1 - Strebl, F. A1 - Schmidt, R. T1 - Agenda 2020 for a European Certification System for CBRNE Sensor Systems and Devices - the Concept for a Road Map T2 - 1st international Symposium on Development of CBRN-Defence Capabilities, the information plaform for experts and Decision Makers in the field of CBRN. CY - Berlin, Germany DA - 2010-11-30 PY - 2010 AN - OPUS4-22665 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Drescher, Daniela A1 - Kneipp, Janina A1 - Orts Gil, Guillermo A1 - Österle, Werner T1 - Investigation of cytotoxicity of silica nanoparticles using viability tetsts and surface-enhanced Raman spectroscopy T2 - Nanobio International 2010 CY - Zurich, Switzerland DA - 2010-09-24 PY - 2010 AN - OPUS4-22667 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lück, Detlef T1 - Organotin Compounds in Soil, Sediment and Water BAM Round Robin - a comparison of methods T2 - Agilent GC-ICP-MS FORUM CY - Waldbronn, Germany DA - 2010-11-03 PY - 2010 AN - OPUS4-22671 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ostermann, Markus A1 - Mans, C. A1 - Simons, C. A1 - Hanning, S. A1 - Kreyenschmidt, M. T1 - Das neue ABS Referenzmaterial BAM-H010 für die Untersuchung von Kunststoffen mit Röntgenfluoreszenz T2 - AK Prozessanalytik 2010 CY - Waldbronn, Germany DA - 2010-11-08 PY - 2010 AN - OPUS4-22672 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bertovic, Marija A1 - Müller, Christina A1 - Fahlbruch, B. T1 - Ganzheitliche Sicherheitsbetrachtung - Human Factors in der zerstörungsfreien Prüfung am Beispiel der nuklearen Endlagerung T2 - Mensch - Technik - Organisation Neue Trends in der ganzheitlichen Betrachtung TÜV NORD Akademie - 3. MTO-Symposium CY - Berlin, Germany DA - 2010-11-11 PY - 2010 AN - OPUS4-22673 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Brauser, Stephan A1 - Weber, Gert T1 - Optischer Dehnungsfeldmessung und intrumentierte Härteeindringprüfung zur Ermittlung von mechanischen Kennwerten für Widerstandspunktschweißverbindungen T2 - AG V 3.9 / NA 092-00-12-07 AK "Prüfen von Widerstandsschweißverbindungen" INPRO Berlin CY - Berlin, Germany DA - 2010-11-10 PY - 2010 AN - OPUS4-23060 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gierds, Jana A1 - Tiebe, Carlo A1 - Hübert, Thomas A1 - Kroh, L. W. T1 - Detektion von leicht flüchtigen organischen Verbindungen mikrobiellen Ursprungs (MVOC) in Gewürzen mittels Ionenmobilitätsspektrometrie (IMS) T2 - 3. IMS-Anwendertreffen CY - Schwerin, Germany DA - 2010-04-26 PY - 2010 AN - OPUS4-23062 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tolstoguzov, A. A1 - Chapon, P. A1 - Ehrke, H. A1 - Goruppa, A. A1 - Hodoroaba, Vasile-Dan A1 - Wirth, Thomas T1 - Sputter depth profiling of AIN/CrN multilayer abrasive coatings: Round-Robin characterisation by SIMS and GD-OES T2 - 11th European Vacuum Conference, EVC-11 CY - Salamanca, Spain DA - 2010-09-20 PY - 2010 AN - OPUS4-23063 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Girard-Lauriault, Pierre-Luc A1 - Ruiz, J.C.G. A1 - Gross, Thomas A1 - Wertheimer, M. R. A1 - Unger, Wolfgang T1 - Ultra shallow surface chemical characterization of plasma and vacuum-ultraviolet organic thin films by angle and excitation energy resolved XPS T2 - HZB-Joint Users Meeting CY - Berlin, Germany DA - 2010-12-09 PY - 2010 AN - OPUS4-23066 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hennig, C. A1 - Ikeda-Ohno, A. A1 - Emmerling, Franziska A1 - Kraus, Werner A1 - Bernhard, G. T1 - Comparative investigation of the solution species [U(CO3)5]6- and the crystal structure of Na6[U(CO3)5].12H2O PY - 2010 DO - https://doi.org/10.1039/B922624A SN - 1477-9226 SN - 1477-9234 SN - 1364-5447 VL - 39 IS - 15 SP - 3744 EP - 3750 PB - RSC CY - Cambridge AN - OPUS4-23047 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Erning, Johann Wilhelm T1 - Korrosionsschäden durch thermische und chemische Desinfektion T2 - 3-Länder-Korrosionstagung - Nichtrostende Stähle - Spezielle Anwendungen und angepasste Lösungen CY - Berlin, Deutschland DA - 2010-04-19 KW - Nichtrostende Stähle PY - 2010 SN - 978-3-935406-40-6 SP - 114 EP - 116 PB - DECHEMA AN - OPUS4-23050 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ballheimer, Viktor A1 - Wille, Frank A1 - Droste, Bernhard T1 - Mechanical safety analysis for high burn-up spent fuel assemblies under accident transport conditions KW - Fuel rods KW - High burn-up KW - Accident conditions KW - Mechanical analysis KW - Failure KW - Accident transport conditions PY - 2010 DO - https://doi.org/10.1179/174650910X12913756439836 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 21 IS - 4 SP - 212 EP - 217 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-23051 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wille, Frank A1 - Droste, Bernhard A1 - Müller, Karsten A1 - Zencker, Uwe T1 - Mechanical design assessment approaches of actual spent fuel and HLW transport package designs KW - Package design KW - Spent fuel KW - High level waste KW - Design computations KW - Testing KW - Design testing KW - Transport packages KW - Numerical analysis KW - Mechanical analysis PY - 2010 DO - https://doi.org/10.1179/174650910X12913738452796 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 21 IS - 4 SP - 203 EP - 207 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-23052 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Binner, Richard A1 - Homberg, U. A1 - Prohaska, S. A1 - Kalbe, Ute A1 - Witt, K. J. ED - Burns, S.E. ED - Bhatia, S.K. ED - Avila, C. M. C. ED - Hunt, B.E. T1 - Identification of descriptive parameters of the soil pore structure using experiments and CT data T2 - ICSE-5 - 5th International conference on scour and erosion CY - San Francisco, CA, USA DA - 2010-11-07 KW - Pore KW - Pore throat KW - Constriction sizes KW - CT-scan KW - Modelling PY - 2010 UR - http://books.google.de/books?id=tpyWlGWonOEC&pg=PA397&dq=Identification+of+descriptive+parameters+of+the+soil+pore+structure+using+experiments+and+CT+data&hl=de&ei=FjxBTbbiHYmbOuvQrOoB&sa=X&oi=book_result&ct=result&resnum=1&ved=0CCoQ6AEwAA#v=onepage&q=Ide SN - 978-0-7844-1147-6 N1 - Serientitel: Geotechnical Special Publication – Series title: Geotechnical Special Publication VL - 210 SP - 397 EP - 407 AN - OPUS4-23053 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Min, Hyegeun A1 - Oran, Umut A1 - Girard-Lauriault, Pierre-Luc A1 - Unger, Wolfgang T1 - ToF-SIMS/Principle Component Analysis (PCA) Study on Ageing of Plasma-Deposited Allylamine Polymer and Styrene/Ethylene-Allylamine Copolymer Films T2 - 12th International Conference on Plasma Surface Engineering CY - Garmisch-Partenkirchen, Germany DA - 2010-09-13 PY - 2010 AN - OPUS4-23068 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Wolfgang T1 - Einsatz molekularer Monoschichten in BAM - AG Schicht- und Oberflächenanalytik T2 - DFG-Rundgespräch "Molekulare Monoschichten" CY - Günzburg, Germany DA - 2010-07-12 PY - 2010 AN - OPUS4-23069 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Darlatt, Erik A1 - Poppenberg, J. A1 - Richter, S. A1 - Traulsen, H.-H. A1 - Schalley, C. A. A1 - Unger, Wolfgang T1 - SR-XPS and NEXAFS characterization of layer stacks formed by self-assembly and layer-by-layer deposition exploiting coordination chemistry T2 - Joint BER II and BESSY II Users' Meeting CY - Berlin, Germany DA - 2010-12-09 PY - 2010 AN - OPUS4-23070 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias A1 - Scholz, Christian A1 - Spaltmann, Dirk T1 - Highly stressed rolling contacts: Thin film coatings or novel steel grades? T2 - 24. International Conference on Surface Modification Technologies (SMT 24) CY - Dresden, Germany DA - 2010-09-07 PY - 2010 AN - OPUS4-23072 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Yevtushenko, Oleksandra A1 - Bäßler, Ralph T1 - Corrosion studies on piping steels exposed to CO2 and artifical brines T2 - EUROCORR 2010 CY - Moscow, Russia DA - 2010-09-13 PY - 2010 AN - OPUS4-23076 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Yevtushenko, Oleksandra A1 - Bäßler, Ralph T1 - Electrochemical studies on pitting corrosion on Cr13 piping steel exposed to CO2 and artifical brine with high chloride concentration T2 - 2. Young Materials Scientist Workshop des World Material Research Institue Forums (WMRIF), BAM CY - Berlin, Germany DA - 2010-08-30 PY - 2010 AN - OPUS4-23077 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Marotzke, Christian T1 - mechanical properties of the fibre/matrix interface region of composite materials T2 - Eingeladener Vortrag Katholike Universitaet Leuven CY - Leuven, Belgium DA - 2010-07-01 PY - 2010 AN - OPUS4-23078 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris A1 - Mätzner, Olaf T1 - Stand Ökodesignrichtlinie Schwerpunkt Elektromotoren (Verordnung (EG) 640/2009) T2 - ExFo 2010 - Internationale Stoffverbote, RoHS, ELV, REACH, EuP/EBPG, WEEE/ElektroG sowie BatterieV CY - Stuttgart, Germany DA - 2010-12-09 PY - 2010 AN - OPUS4-23087 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Vorstellung Ladungssicherheits-Informations-System (LIS) der BAM T2 - LaSi Kongress "Ladungssicherung in Theorie und Praxis" CY - Leuna, Germany DA - 2010-03-17 PY - 2010 AN - OPUS4-23090 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hennecke, Manfred T1 - Die BAM - Ressortforschungseinrichtung für Sicherheit in Technik und Chemie T2 - Bundesministerium für Wirtschaft und Technologie (BMWi) CY - Berlin, Germany DA - 2010-04-23 PY - 2010 AN - OPUS4-23114 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rabin, Ira A1 - Kraj Cigic, I. A1 - Strlic, M. T1 - Dead Sea Scrolls studies within COST D42 Action T2 - COST D42 final conference, Dublin, November 8 - 10, 2010 CY - Dublin, Ireland DA - 2010-11-08 PY - 2010 AN - OPUS4-23097 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hahn, Oliver T1 - History of Inks T2 - 4. N.i.Ke.-Workshop: Archaeometry of the Dead Sea Scrolls CY - Berlin, Germany DA - 2010-11-15 PY - 2010 AN - OPUS4-23098 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rabin, Ira T1 - Hidden history of the DSS T2 - Israel Museum, public lecture CY - Jerusalem, Israel DA - 2010-01-19 PY - 2010 AN - OPUS4-23099 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rabin, Ira A1 - Strlic, M. A1 - Kolar, J. A1 - Kraj Cigic, I. T1 - Volatiles as valuable information of parchment condition T2 - COST D42 Qumran meeting CY - Jerusalem, Israel DA - 2010-05-25 PY - 2010 AN - OPUS4-23100 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rabin, Ira T1 - Dead Sea Scrolls report T2 - 4. N.I.Ke Workshop: Qumran CY - Berlin, Germany DA - 2010-11-15 PY - 2010 AN - OPUS4-23101 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rabin, Ira T1 - Manuscript Studies assisted by Natural Sciences T2 - COMSt conference CY - Pisa, Italy DA - 2010-11-26 PY - 2010 AN - OPUS4-23103 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rabin, Ira T1 - Writing materials database as a future dating tool T2 - COMSt conference CY - Hamburg, Germany DA - 2010-07-23 PY - 2010 AN - OPUS4-23104 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Armbruster, R. A1 - Heckel, Thomas A1 - Fenger, S. T1 - Die gläserne Schiene - Fortgeschrittene Ultraschall-Schienenprüfung KW - Ultraschall KW - Wirbelstrom KW - Zerstörungsfreie Prüfung (ZfP) KW - Schienenprüfung KW - Signalverarbeitung PY - 2010 SN - 1616-069X SN - 0948-5112 VL - 121 SP - 65 EP - 68 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung CY - Berlin AN - OPUS4-23254 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gebhardt, Moritz Oliver A1 - Quiroz Penaranda, Vanessa A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael ED - Cerjak, H. ED - Enzinger, N. T1 - Restraint effects on stresses and strains in single-run high power laser beam welding of thick plates KW - Laserstrahlschweißen KW - Heißrisse KW - Einspannung PY - 2010 SN - 978-3-85125-127-2 SP - 1011 EP - 1033 PB - Verlag der Technischen Universität Graz AN - OPUS4-23301 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nehrig, Marko A1 - Wille, Frank A1 - Quercetti, Thomas A1 - Masslowski, Jörg-Peter A1 - Droste, Bernhard A1 - Pope, R. T1 - Historical view and experiences with the crush test for light weight packages T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Crush test KW - IAEA regulations KW - Type-B PY - 2010 SP - 1 EP - 8(?) AN - OPUS4-23303 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Müller, Urs T1 - Verwendung von Anti-Graffiti-Systemen auf Mauerwerk PY - 2010 SN - 0943-9293 IS - B 74 SP - 1 EP - 35 PB - Wirtschaftsverl. NW Verlag für neue Wissenschaft GmbH CY - Bergisch Gladbach AN - OPUS4-23282 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tikhomirov, D. A1 - Schwenk, Christopher T1 - Efficient numerical welding simulation through standardisation PY - 2010 SN - 0043-2318 VL - LVI IS - 09 SP - 18 EP - 21 PB - Welding Research Council CY - New York, NY AN - OPUS4-23283 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Heckel, Thomas A1 - Kreutzbruck, Marc A1 - Montag, Hans-Joachim A1 - Fenger, S. T1 - The glassy rail: advanced ultrasonic rail inspection PY - 2010 SN - 0976-254X VL - 1 IS - 5 SP - 16 EP - 19 PB - Headliners Advertising Services Pvt. Ltd. CY - Kolkata, India AN - OPUS4-23269 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schilder, Constanze A1 - Kohlhoff, Harald A1 - Hofmann, Detlef A1 - Habel, Wolfgang T1 - Structure-integrated fibre optic AE sensor for concrete pile testing and monitoring N2 - A highly resolving fibre optic sensor based on the Fabry-Perot technology has been developed for integration into concrete piles with the purpose of static and dynamic pile testing as well as monitoring. The paper presents the design of the sensitive element and first results of large-scale model pile tests. T2 - Photonics 2010 - 10th International conference on fiber optics & photonics CY - Guwahati, India DA - 2010-12-11 KW - Concrete-embedded fibre optic sensors KW - Fabry Perot sensor KW - Strain measurement KW - Dynamic pile testing KW - Pile integrity KW - Cast-in-place bored piles PY - 2010 SN - 978-81-309-1719-1 IS - 256_SEN_Schilder_C_1_full SP - 1 EP - 4 AN - OPUS4-23272 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Friedrich, Jörg Florian A1 - Krüger, P. ED - Blasek, G. ED - Bräuer, G. T1 - Feinreinigung von Oberflächen mit Niederdruckplasmen KW - Plasma-Oberflächenreinigung PY - 2010 SN - 978-3-87480-257-4 IS - Kap. 3.15 SP - 1085 EP - 1106 PB - Eugen G. Leuze CY - Bad Saulgau AN - OPUS4-23273 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Friedrich, Jörg Florian ED - Blasek, G. ED - Bräuer, G. T1 - Plasmapolymerisation KW - Plasma-Oberflächenreinigung PY - 2010 SN - 978-3-87480-257-4 IS - Kap. 2.4 SP - 356 EP - 451 PB - Eugen G. Leuze CY - Bad Saulgau AN - OPUS4-23274 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Friedrich, Jörg Florian ED - Blasek, G. ED - Bräuer, G. T1 - Modifizieren und Beschichten von Polymeroberflächen KW - Plasma-Oberflächenreinigung PY - 2010 SN - 978-3-87480-257-4 IS - Kap. 2.6 SP - 537 EP - 601 ff. PB - Eugen G. Leuze CY - Bad Saulgau AN - OPUS4-23275 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Röntgenfluoreszenzanalyse mit Synchrotronstrahlung an derr Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin T2 - Seminar: Strahlenphysikalische Anwendungen in Technik und Medizin CY - Vienna, Austria DA - 2010-01-13 PY - 2010 AN - OPUS4-23261 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich T1 - Synchrotronstrahlung für die Untersuchung von Kunstobjekten T2 - DGZfP Arbeitskreis Dresden CY - Dresden, Germany DA - 2010-12-09 PY - 2010 AN - OPUS4-23264 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Single Fiber Pull-out Test T2 - 4th International CFK-Valley Stade Convention CY - Stade, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-23289 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramanujam, Maalolan A1 - Mix, Renate A1 - Friedrich, Jörg F. T1 - Argon Plasma Treatment of Polymers - Trapping of Radicals by Nitric Oxidegassing T2 - Plasma Surface Engineering 2010 CY - Garmisch-Partenkirchen, Germany DA - 2010-09-13 PY - 2010 AN - OPUS4-23244 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pavlovic, Mato A1 - Boehm, Rainer A1 - Müller, Christina A1 - Pitkänen, J. A1 - Ronneteg, U. T1 - Investigation of the influence of the material attenuation on the POD of the flaws T2 - 8th International conference on NDE in relation to structural integrity for nuclear and pressurised components CY - Berlin, Germany DA - 2010-09-29 KW - POD KW - NDT KW - Attenuation KW - Ultrasonic KW - Reliability PY - 2010 SN - 978-3-940283-30-6 IS - DGZfP-BB 125 (Th.2.B.2) SP - 1 EP - 9 CY - Berlin AN - OPUS4-23922 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina A1 - Bertovic, Marija A1 - Pavlovic, Mato A1 - Kanzler, Daniel A1 - Rosenthal, Martina A1 - Pitkänen, J. A1 - Ronneteg, U. T1 - Progress in evaluating the reliability of NDE systems - paradigm shift N2 - The paper will give an overview of new methodology for evaluating the reliability of NDE systems accurately, reliably and efficiently in accordance with the specific requirements of industrial application. After a review of the substantive issues from the previous workshops, the go forward guidance from these interactions is considered. At the beginning of the reliability analysis, the actual safety demands have to be defined in order to fit the investigation to the level of risk when the component would fail. Next, all the essential influencing parameters need to be documented and transferred to an appropriate design of experiments (DOE) to determine the reliability in terms of a qualitative assessment for lower risk or in terms of a quantitative probability of detection (POD) or ROC (Receiver Operating Characteristics) curves for higher safety demands. A new paradigm is offered to consider the POD or reliability of the system as a function of the configuration of input variables and use it for optimisation rather than for a final judgement. An advantage for the end user is also to sample all single PODs to an integral 'Volume POD' of a part. Among the influencing parameters, the human factor is the most important one. A systematic psychological approach shall help to find out where the bottlenecks are but most importantly to provide best possible working conditions for the human inspectors. T2 - 8th International conference on NDE in relation to structural integrity for nuclear and pressurised components CY - Berlin, Germany DA - 2010-09-29 KW - Reliability KW - POD KW - ROC KW - Safety PY - 2010 SN - 978-3-940283-30-6 IS - DGZfP-BB 125 (Th.3.A.4) SP - 1 EP - 10 CY - Berlin AN - OPUS4-23923 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kanzler, Daniel A1 - Milsch, Steffen A1 - Pavlovic, Mato A1 - Müller, Christina A1 - Pitkänen, J. T1 - Concept of total reliability of NDT methods for inspection of the EB weld of the copper canister used for a long-term storage of spent nuclear fuel T2 - 8th International conference on NDE in relation to structural integrity for nuclear and pressurised components CY - Berlin, Germany DA - 2010-09-29 KW - POD KW - Ultrasonic testing KW - Radiographic testing KW - Eddy current testing PY - 2010 SN - 978-3-940283-30-6 IS - DGZfP-BB 125 (Th.3.A.5) SP - 1 EP - 6 CY - Berlin AN - OPUS4-23924 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bertovic, Marija A1 - Müller, Christina A1 - Fahlbruch, B. A1 - Pitkänen, J. A1 - Ronneteg, U. T1 - Human factors approach to the reliability of NDT in nuclear waste management in Sweden and Finland N2 - Nuclear power industry has the responsibility to manage and dispose of all radioactive waste from its plants. Finnish Posiva and Swedish SKB are leading in the world in the development of disposal of spent nuclear fuel. Their method consists of encapsulating spent nuclear fuel in copper canisters and depositing them in the bedrock at a depth of about 500 meters for the next 100 000 years, leaving the radioactivity to decrease naturally through the decay of the radioisotopes in it. The copper canisters, consisting of a copper tube, a lid and a bottom (which make the outer shell) and an insert made of a cast iron, need to be inspected for their structural integrity to ensure no critical defects are present in the materials and welds that could lead to a leakage of the waste into the environment. Data acquired by 4 different non-destructive testing (NDT) methods (i.e. UT, ET, RT and VT with a remote camera) are evaluated by skilled human operators and therefore could be subject to human error. Human Factors approach lies in identifying potential errors made by the human, their causes and ways of preventing them. A customized Failure Modes and Effects Analysis (FMEA) was conducted to anticipate possible human failures during the data evaluation. The results led to designing several experiments (e.g. diffusion of responsibility within the 4-eye principle, over trust in automated systems) which are being experimentally tested in ongoing projects. The results are expected to lead to the optimization of the procedures followed by the NDT operators and consequently to the improvement of the overall NDT reliability. T2 - 8th International conference on NDE in relation to structural integrity for nuclear and pressurised components CY - Berlin, Germany DA - 2010-09-29 KW - Human factors KW - Reliability KW - NDT KW - Nuclear waste PY - 2010 UR - http://www.ndt.net/article/jrc-nde2010/papers/32.pdf SN - 978-3-940283-30-6 IS - DGZfP-BB 125 (Th.3.A.2) SP - 1 EP - 10 CY - Berlin AN - OPUS4-23925 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Binley, A. A1 - Kruschwitz, Sabine A1 - Lesmes, D. A1 - Kettridge, N. T1 - Exploiting the temperature effects on low frequency electrical spectra of sandstone: a comparison of effective diffusion path lengths N2 - A number of recent investigations have highlighted the potential value of using relaxation times derived from electrical spectra to infer key physical properties of permeable rocks. To date, most studies have assumed a grain size or pore throat as a measure of the length scale of the ionic diffusive process, although this has been challenged in recent experimental investigations. We compare the electrical spectra of three sandstones, adopting a new approach in which the temperature of the rock samples is perturbed and the relaxation time measured as a function of temperature. Our results suggest that, for the sandstones tested here, the effective diffusion coefficient should be considered as a function of the electrical tortuosity. These findings may help explain the apparent long relaxation times observed in low-permeability rocks in recent experimental studies. We also highlight the need to account for temperature in related studies of electrical spectra. KW - Grain size KW - Porosity KW - Rocks KW - Spectral induced polarization KW - Temperature KW - Sandstone KW - Saturation KW - Diffusion PY - 2010 DO - https://doi.org/10.1190/1.3483815 SN - 0016-8033 VL - 75 IS - 6 SP - A43 EP - A46 PB - Soc. CY - Tulsa, Okla. [u.a.] AN - OPUS4-23860 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kruschwitz, Sabine A1 - Binley, A. A1 - Lesmes, D. A1 - Elshenawy, A. T1 - Textural controls on low-frequency electrical spectra of porous media N2 - The results from several laboratory studies of the relationships between electrical polarization and physical properties of porous media have prompted interest in the potential use of low-frequency electrical spectra to qualitatively or quantitatively map variation in hydrogeologic properties in the field. Compiling several published and unpublished data sets, supported by new measurements, we have examined the low-frequency electrical spectra of a range of natural and artificial porous media to assess the generality of proposed relationships between electrical and physical properties. Our work confirms a significant positive correlation between the magnitude of electrical polarization (quantified as imaginary conductivity at a specific frequency) and the surface-area/pore-volume ratio Spor. Analyzing the parameters of ageneralized Cole-Cole resistivity relaxation model fitted to many electrical spectra, we observe two apparent controls on the electrical relaxation. For samples with abundant relatively large pore throats, we observe a distinct increase in the time constant of the model with modal pore-throat size, in accordance with classical electrical relaxation models. However, for media with pore structures dominated by small pore throats, the diffusion-length scales do not appear to be controlled by modal pore-throat size. We conclude that for such media, the microstructure of the network of small pores leads to some connectivity of diffusion paths; thus, these samples exhibit relatively large time constants. There is potential value in addition to limitations when using electrical spectra to estimate physical properties of porous media, and we see the need for more appropriate generalized theories of electrical polarization in hydrogeologic media. KW - Geophysical techniques KW - Terrestrial electricity KW - Spectral induced polarization KW - Temperature KW - Sandstone KW - Saturation KW - Diffusion PY - 2010 DO - https://doi.org/10.1190/1.3479835 SN - 0016-8033 VL - 75 IS - 4 SP - WA113 EP - WA123 PB - Soc. CY - Tulsa, Okla. [u.a.] AN - OPUS4-23861 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kneipp, Janina A1 - Kneipp, H. A1 - Wittig, B. A1 - Kneipp, K. T1 - Novel optical nanosensors for probing and imaging live cells N2 - This review introduces multifunctional optical nanosensors based on surface-enhanced Raman scattering (SERS) and demonstrates their application in live cells. The novel nanosensors have the potential to improve our understanding of cellular processes on the molecular level. The hybrid sensor consists of gold or silver nanoparticles with an attached reporter species. The sensor can be detected and imaged based on the SERS signature of the reporter. This results in several advantages, such as high spectral specificity, multiplex capabilities, improved contrast, and photostability. SERS sensors not only highlight cellular structures, based on enhanced Raman spectra of intrinsic cellular molecules measured in the local optical fields of the gold nanoparticles, they also provide molecular structural information on their cellular environment. Moreover, the SERS signature of the reporter can deliver information on the local pH value inside a cell at subendosomal resolution. SERS sensors are suitable for one- and two-photon excitation. KW - Cells KW - Optical nanosensors KW - Nano gold KW - Spectroscopy KW - SERS KW - ph probing PY - 2010 DO - https://doi.org/10.1016/j.nano.2009.07.009 SN - 1549-9634 SN - 1549-9642 VL - 6 IS - 2 SP - 214 EP - 226 PB - Elsevier CY - New York AN - OPUS4-23943 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zehbe, R. A1 - Goebbels, Jürgen A1 - Ibold, Y. A1 - Gross, U. A1 - Schubert, H. T1 - Three-dimensional visualization of in vitro cultivated chondrocytes inside porous gelatine scaffolds: A tomographic approach N2 - Synchrotron radiation-based microcomputed tomography (SR-µCT) has become a valuable tool in the structural characterization of different types of materials, achieving volumetric details with micrometre resolution. Biomedical research dealing with porous polymeric biomaterials is one of the research fields which can benefit greatly from the use of SR-µCT. This study demonstrates that current experimental setups at synchrotron beamlines achieve a sufficiently high resolution in order to visualize the positions of individual cartilage cells cultivated on porous gelatine scaffolds made by a freeze-structuring technique. Depending on the processing parameters, the pore morphology of the scaffolds investigated was changed from large-pore sized but non-ordered structures to highly directional and fine pored. The cell-seeded scaffolds were stained with a combined Au/Ag stain to enhance the absorption contrast in SR-µCT. While only some cells showed enhanced absorption contrast, most cells did not show any difference in contrast to the surrounding scaffold and were consequently not detectable using conventional greyscale threshold methods. Therefore, using an image-based three-dimensional segmentation tool on the tomographic data revealed a multitude of non-stained cells. In addition, the SR-µCT data were compared with data obtained from scanning electron microscopy, energy dispersive X-ray spectroscopy and histology, while further linking the initial cell density measured via a MTT assay to the pore size as determined by SR-µCT. KW - Image analysis KW - Chondrocyte KW - Gelatine scaffold KW - Cartilage tissue engineering KW - Synchrotron radiation-based µCT PY - 2010 DO - https://doi.org/10.1016/j.actbio.2009.11.020 SN - 1742-7061 VL - 6 IS - 6 SP - 2097 EP - 2107 PB - Elsevier CY - Amsterdam AN - OPUS4-23944 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marwitz, Christian A1 - Kloß, Heinz T1 - Bestimmung von Adhäsionskräften mit dem Rasterkraftmikroskop T2 - 51. Tribologie-Fachtagung - Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen CY - Göttingen, Deutschland DA - 2010-09-27 KW - Adhäsion KW - Deformation KW - AFM KW - Rauheit PY - 2010 SN - 978-3-00-032180-1 VL - II SP - 53/1 EP - 53/13 CY - Aachen AN - OPUS4-23946 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Droste, Bernhard A1 - Ulrich, Armin A1 - Borch, Jörg-Peter T1 - Brandnew fire test facilities at 'BAM test site technical safety' N2 - Fire testing is an essential part of the hypothetical, cumulative mechanical and thermal accident test conditions that shall guarantee package safety in severe accidents. Not only for radioactive material transport packages but also for other containments of dangerous goods international standards require specific thermal load specifications. Following the guideline 'Safety in tech-nology and chemistry' BAM as a scientific and technical German federal government institute operates a 12 km² large open air test facility for experimental investigations of dangerous goods and their containments. On an area besides the well-known 200-ton drop test facility we put into operation new fire test facilities. This facility area provides two fire test stands that are utilized with liquid Propane as fuel from a central earth-covered 60 m³ LPG storage tank. From that stor-age the Propane is pumped via pipelines to the test stands where the gas is released from nozzles, and ignited by ignition burners. The fire exposed test facility areas are 12 m x 8 m. Fire test facil-ity B (with gas release nozzles below water-covered ground) is designed for fire testing of con-tainers that may burst during the test. Fire test facility A (with ring burner systems) is designed for heavy test objects up to 200 tons, e.g. for full-scale spent fuel casks. The paper will present a detailed description of the facility, insight into first test performances, and results of calorimeter fire tests, using containers of various sizes, to verify the absorbed heat fluxes, demonstrating that regulatory fire test conditions are met, and that the Propane fire can be compared with a kerosene or heating oil pool fire. T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Transport und Lagerung radioaktiver Stoffe KW - Gefahrgutrechtliche Bauartprüfung KW - Brandversuche PY - 2010 SP - 1 EP - 8 (Wednesday/Poster Session/218) AN - OPUS4-23900 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Völzke, Holger A1 - Probst, Ulrich A1 - Wolff, Dietmar T1 - Ageing management for long term interim storage casks T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Ageing management KW - Lifetime KW - Material degradation PY - 2010 SP - 1 EP - 17 (Tuesday/T20/61) AN - OPUS4-23907 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weber, Mike A1 - Wille, Frank A1 - Ballheimer, Viktor A1 - Musolff, André T1 - From experiment to an appropriate finite element model-safety assessment for ductile cast iron casks demonstrated by means of IAEA puncture drop test N2 - In the approval procedure of transport packages for radioactive materials, the competent authority mechanical and thermal safety assessment is carried out in Germany by BAM Federal Institute for Materials Research and Testing. The combination of experimental investigations and numerical calculations in conjunction with materials and components testing is the basis of the safety assessment concept of the BAM. Among other mechanical test scenarios a 1 meter drop test onto a steel bar has to be considered for hypothetical accident conditions of Type B packages according to IAEA regulations. Within the approval procedure for the new German package design of the HLW cask CASTOR® HAW 28M, designed by GNS Gesellschaft für Nuklear-Service Germany, a puncture drop test was performed with a half-scale model of the cask at -40°C. For independent assessment and to control the safety analysis presented by applicant, BAM developed a complex finite element model for a dynamical ABAQUS/ExplicitTM analysis. This paper describes in detail the use of the finite element (FE) method for modeling the puncture drop test within an actual assessment strategy. At first investigations of the behaviour of the steel bar are carried out. Different friction coefficients and the material law of the bar are analysed by using a 'rigid-body' approximation for the cask body. In the next step a more detailed FE model with a more realistic material definition for the cask body is developed. Strain verification is possible by results of the strain gauges located at the relevant points of the cask model. The influence of the finite element meshing is described. Finally, the verified FE half-scale model is expanded to full-scale dimension. Scaling effects are analysed. The model is used for safety assessment of the package to be approved. T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - IAEA KW - Puncture drop test KW - Numerical analysis KW - Verification PY - 2010 SP - 1-8 (Tuesday/T19/26-115) AN - OPUS4-23928 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Holtappels, Kai A1 - Ried, Peter A1 - Krause, Heike A1 - Eliezer, D. T1 - Pressure resistance of glass capillary structures for gas storage purposes T2 - First International Conference on Materials for Energy CY - Karlsruhe, Germany DA - 2010-07-04 PY - 2010 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, Martin - Birth name of Kluge, Martin: Beckmann-Kluge, Martin AN - OPUS4-24056 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Grytsenko, K. P. A1 - Kolomzarov, Y. A1 - Lytvyn, O. A1 - Strelchuk, V. A1 - Ksianzou, V. A1 - Schrader, S. A1 - Beyer, H. A1 - Servet, B. A1 - Enouz-Vedrenne, S. A1 - Garry, G. A1 - Schulze, Rolf-Dieter A1 - Friedrich, Jörg Florian T1 - Metal-filled polytetrafluoroethylene nanostructered thin film N2 - Thin metal-filled polyterafluoroethylene films with various metal concentration were produced by co-deposition in vacuum. Metal nanocluster size increased with metal concentration. Films were heated up to 300 degrees C, their optical spectra were recorded during heating. The changes in plasmon band shape and wavelength of the nanocluster ensemble during heating are not linearly related with metal concentration and heating temperature. This is caused by different thermal behavior of the complex processes, which are taking place in each of the two materials present in the film. The metal cluster size and optical properties of the whole ensemble can be purposefully formed by varying metal nature, its concentration and annealing temperature of the film. Nano- and micro-domains with properties different from original film were generated by focused excimer laser or electron beam. Gold-filled PTFE nano-structured films were used as substrate for surface enhanced Raman scattering measurements of ultrathin film of Rhodamine 6G dye. KW - Gold nanoparticles KW - Arrays KW - SERS PY - 2010 UR - http://openurl.ingenta.com/content?genre=article&issn=1936-6612&volume=3&issue=3&spage=308&epage=312 DO - https://doi.org/10.1166/asl.2010.1127 SN - 1936-6612 SN - 1936-7317 VL - 3 IS - 3 SP - 308 EP - 312 PB - American Scientific Publ. CY - Stevenson Ranch, Calif. AN - OPUS4-23957 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Winkelmann, Aimo A1 - Nolze, Gert T1 - Analysis of Kikuchi band contrast reversal in electron backscatter diffraction patterns of silicon N2 - We analyze the contrast reversal of Kikuchi bands that can be seen in electron backscatter diffraction (EBSD) patterns under specific experimental conditions. The observed effect can be reproduced using dynamical electron diffraction calculations. Two crucial contributions are identified to be at work: First, the incident beam creates a depth distribution of incoherently backscattered electrons which depends on the incidence angle of the beam. Second, the localized inelastic scattering in the outgoing path leads to pronounced anomalous absorption effects for electrons at grazing emission angles, as these electrons have to go through the largest amount of material. We use simple model depth distributions to account for the incident beam effect, and we assume art exit angle dependent effective crystal thickness in the dynamical electron diffraction calculations. Very good agreement is obtained with experimental observations for silicon at 20 key primary beam energy. KW - Electron backscatter diffraction KW - Kikuchi patterns KW - Dynamical electron diffraction simulation PY - 2010 DO - https://doi.org/10.1016/j.ultramic.2009.11.008 SN - 0304-3991 VL - 110 IS - 3 SP - 190 EP - 194 PB - Elsevier CY - New York, NY AN - OPUS4-24008 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Wencke A1 - Feigl, Michael A1 - Dörfel, Ilona A1 - Saliwan Neumann, Romeo A1 - Piedra Gonzalez, Elsa Maria A1 - Nofz, Marianne A1 - Kranzmann, Axel T1 - Alumina Coatings against Carburization and Oxidation under Oxyfuel Conditions T2 - Materials for Energy 2010 CY - Karlsruhe, Germany DA - 2010-07-05 PY - 2010 AN - OPUS4-24013 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lai Wai-Lok, Wallace A1 - Kind, Thomas A1 - Wiggenhauser, Herbert T1 - A study of concrete hydration and dielectric relaxation mechanism using ground penetrating radar and short-time fourier transform N2 - Ground penetrating radar (GPR) was used to characterize the frequency-dependent dielectric relaxation phenomena in ordinary Portland cement (OPC) hydration in concrete changing from fresh to hardened state. The study was experimented by measuring the changes of GPR A-scan waveforms over a period of 90 days, and processed the waveforms with short-time Fourier transform (STFT) in joint time-frequency analysis (JTFA) domain rather than a conventional time or frequency domain alone. The signals of the direct wave traveled at the concrete surface and the reflected wave from an embedded steel bar were transformed with STFT, in which the changes of peak frequency over ages were tracked. The peak frequencies were found to increase with ages and the patterns were found to match closely with primarily the well-known OPC hydration process and secondarily, the evaporation effect. The close match is contributed to the simultaneous effects converting free to bound water over time, on both conventional OPC hydration and dielectric relaxation mechanisms. KW - Soil water content KW - Wet soil KW - Microwave KW - Moisture KW - GPR KW - Dispersion PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-239723 DO - https://doi.org/10.1155/2010/317216 SN - 1687-6172 IS - Article ID 317216 SP - 1 EP - 14 PB - Hindawi Publ. CY - New York, NY, USA AN - OPUS4-23972 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weiser, M. A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Erdmann, B. T1 - Development and test of a numerical model for pulse thermography in civil engineering N2 - Pulse thermography of concrete structures is used in civil engineering for detecting voids, honeycombing and delamination. Quantitatively realistic numerical 3D simulation is difficult due to the arising boundary layer at the heated surface and unreliable information about material parameters and environmental conditions. We address both issues by a semi-analytic reformulation of the heat transport problem and by parameter identification. Numerical results are compared with measurements of a test specimen. PY - 2010 DO - https://doi.org/10.1007/s00231-010-0656-9 SN - 0947-7411 VL - 46 IS - 11-12 SP - 1419 EP - 1428 PB - Springer CY - Berlin AN - OPUS4-23973 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Sebastian A1 - Piechotta, Christian A1 - Godejohann, M. A1 - Win, Tin A1 - Nehls, Irene A1 - Mügge, C. T1 - Characterisation of commercially available linear alkylbenzenesulfonates by LC-SPE-NMR/MS (liquid chromatography-solid phase extraction-nuclear magnetic resonance spectroscopy-mass spectroscopy) N2 - Commercially available linear alkylbenzenesulfonates (LASs) are a mixture of various homologues and isomers, leading to 20 major species. In this work we investigated the commercial product by liquid chromatography-solid phase extraction-nuclear magnetic resonance spectroscopy-mass spectrometry (LC-SPE-NMR/MS). The commercial product was separated into 17 fractions by liquid chromatography (LC). After chromatographic separation, 5% of the flow was split to a mass spectrometer (MS) while 95% was send to post-column solid phase extraction cartridges for enrichment of the analytes (LC-SPE). After elution from the SPE-cartridges a NMR-spectrometer equipped with a cryo-probe was used for the characterisation of the different LASs species. For the first time H-1-1D and H-H-COSY spectra for 14 LASs species out of 20 major isomers are presented, whereas the 6 remaining species are detected as mixtures in 3 H-1-1D and H-H-COSY spectra. These data were used to correlate the chromatographic retention of the LASs isomers to the substitution pattern of the alkyl chain. KW - Linear alkylbenzenesulfonates KW - NMR KW - SPE KW - Liquid chromatography KW - Mass spectrometry KW - Surfactants PY - 2010 DO - https://doi.org/10.1016/j.talanta.2010.04.011 SN - 0039-9140 VL - 82 IS - 1 SP - 143 EP - 150 PB - Elsevier CY - Amsterdam AN - OPUS4-24004 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gucunski, N. A1 - Romero, F. A1 - Kruschwitz, Sabine A1 - Feldmann, Rüdiger A1 - Abu-Hawash, A. A1 - Dunn, M. T1 - Multiple complementary nondestructive evaluation technologies for condition assessment of concrete bridge decks N2 - Reinforced concrete bridge decks are exposed to several types of deterioration processes: corrosion, alkali silica reaction, carbonation, shrinkage, freeze thaw actions, and so forth. The most commonly found problem is corrosion-induced bridge deck delamination. Previous studies have shown that surveys of bridges relying on a single nondestructive evaluation (NDE) technology provide limited information about the condition of concrete bridge decks. To overcome limitations of individual technologies, a complementary approach using several NDE technologies should be used in bridge deck evaluation. The presented approach utilizes a suite of NDE technologies, namely, impact echo (IE), ultrasonic surface waves (USW), ground-penetrating radar (GPR), half-cell potential (HCP), and electrical resistivity (ER). The suite of NDE technologies was implemented in the evaluation of bridge decks on nine bridges in Iowa. The NDE was complemented by ground-truth measurements on the cores extracted from all nine bridge decks. Condition assessment with the five NDE technologies has clearly shown their advantages and limitations. For example, the GPR surveys provided assessment of concrete deterioration at relatively high speeds of data collection. In contrast, IE provided high accuracy in detection and characterization of delaminations in the deck but at a lower testing speed. HCP and ER tests provided assessment of the likelihood of corrosion, whereas the USW test provided accurate assessment of the effects of deterioration processes and defects on mechanical properties, primarily the degradation of the elastic modulus. Most important, the survey showed the advantages of use of multimodal NDE surveys in the comprehensiveness of condition assessment of concrete bridge decks. PY - 2010 DO - https://doi.org/10.3141/2201-05 SN - 0361-1981 VL - 2010 IS - 2201 SP - 34 EP - 44 PB - National Research Council CY - Washington, DC AN - OPUS4-24005 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kosslick, H. A1 - Pitsch, I. A1 - Deutsch, J. A1 - Pohl, M.-M. A1 - Schulz, A. A1 - Vu, A.T. A1 - Nguyen, D.T. A1 - Frunza, L. A1 - Jäger, Christian T1 - Improved large mesoporous ordered molecular sieves - Stabilization and acid/base functionalization N2 - The preparation of nanoporous materials with enhanced stability using an improved synthesis route using reactive inorganic silica and alumina species is reported. This way improved mesoporous molecular sieves were obtained. The synthesized aluminum substituted mesoporous molecular materials (Al-MMS) contain very large pores of 50–200 Å size combined with an improved pore wall thickness. Increased wall thickness and Al substitution lead to an improved chemical stability against alkaline solution. The textural, structural and acid properties are investigated by physico-chemical methods. The catalytic performance acidic materials was tested in the benzoylation reaction; amino functionalized materials were studied in the base catalyzed Michael addition. KW - Nanoporous molecular sieve KW - Al substitution KW - Stability KW - Synthesis KW - Acidity KW - Catalysis PY - 2010 DO - https://doi.org/10.1016/j.cattod.2010.03.005 SN - 0920-5861 VL - 152 IS - 1-4 SP - 54 EP - 60 PB - Elsevier CY - Amsterdam AN - OPUS4-23960 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Alver, Ninel A1 - Wiggenhauser, Herbert T1 - Modified SIBIE procedure for ungrouted tendon ducts applied to scanning impact-echo N2 - The impact-echo method has been successfully applied to identify defects inside concrete. In addition, to detect ungrouted tendon ducts in a large concrete slab, a scanning impact-echo technique is developed. However, since resonant frequencies in the spectrum responsible for the travel paths via defects are only taken into account, the method could lead to erroneous results due to complicated spectra obtained in the tests. Consequently, Stack Imaging of spectral amplitudes Based on Impact-Echo (SIBIE) procedure has been developed to improve the data interpretation. Conventionally, SIBIE is applied to a single measurement data and a point information of defects is obtained at the area, where the impact test is performed. In this study, SIBIE is applied to scanning impact-echo data. Locations of ungrouted tendon ducts embedded in a large concrete specimen are investigated. In order to visualize the whole cross-section tested, the SIBIE analysis is modified, introducing an elliptical integration mode. It is demonstrated that ungrouted tendon ducts are successfully located by the modified SIBIE analysis, whereas results of the conventional B-scan analysis are not so good as the modified SIBIE analysis. KW - Impact echo KW - Scanning procedure KW - SIBIE PY - 2010 DO - https://doi.org/10.1016/j.conbuildmat.2010.05.012 SN - 0950-0618 VL - 24 IS - 12 SP - 2388 EP - 2392 PB - Elsevier Science CY - Amsterdam AN - OPUS4-23961 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maier, W. A1 - Arlt, Tobias A1 - Wannek, C. A1 - Manke, I. A1 - Riesemeier, Heinrich A1 - Krüger, P. A1 - Scholta, J. A1 - Lehnert, W. A1 - Banhart, J. A1 - Stolten, D. T1 - In-situ synchrotron X-ray radiography on high temperature polymer electrolyte fuel cells N2 - In contrast to classical low temperature polymer electrolyte fuel cells (LT-PEFCs), the membrane conductivity in high temperature polymer electrolyte fuel cells (HT-PEFCs) (operating temperature ~ 160 °C) is based on proton transport within phosphorus-oxygen acids at different levels of hydration, orthophosphoric acid (H3PO4) being the simplest example. We present for the first time in-situ synchrotron X-ray radiography measurements applied to a HT-PEFC to gain insight into the local composition of the membrane electrode assembly (MEA) under dynamic operating conditions. Transmission changes during the radiographic measurements exhibit a clear influence of the formation of product water on the membrane composition. KW - HT-PEFC KW - Synchrotron x-ray radiography KW - Membrane electrode assembly (MEA) KW - Phosphoric acid PY - 2010 DO - https://doi.org/10.1016/j.elecom.2010.08.002 SN - 1388-2481 VL - 12 IS - 10 SP - 1436 EP - 1438 PB - Elsevier CY - Amsterdam AN - OPUS4-23962 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ivanov, A. A. A1 - Yudina, N. V. A1 - Mal'tseva, E. V. A1 - Mathies, Helena A1 - Svarovskaya, L. I. T1 - Stimulation of the activity of microorganisms by humin preparations in oil-polluted soils N2 - The influence of humin preparations obtained from low-moor peat by the mechanochemical method on the changes in the microflora number and hydrocarbon composition in oil-polluted soils was studied. The intense growth of the microorganisms in number especially in the oil-polluted soil was observed upon the application of humin acids (at a concentration of 0.005 wt %) extracted from mechanically processed peat. In this case, the content of the extracted bitumoids decreased down to 40 wt %. The soil microflora stimulated by the humin preparations was shown to have highly destructive oil-oxidizing activity reflected in the indices of the hydrocarbon biodegradation. The mechanochemical activation of peat allows raising the efficiency of extracting the humic acids and can be a reason for increasing the availability of their individual components and parts of molecules, including micro- and macroelements that are used by microbial cells as sources of nutrition and energy. PY - 2010 DO - https://doi.org/10.1134/S1064229310020110 SN - 1064-2293 VL - 43 IS - 2 SP - 210 EP - 215 PB - Springer CY - Berlin AN - OPUS4-23966 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Ferrero, Fabio A1 - Schröder, Volkmar A1 - Acikalin, Hatice Aydan A1 - Steinbach, J. T1 - Improvements in the modeling of the self ignition of tetrafluoroethylene N2 - In order to prevent incidents in the industrial production of Teflon® from Tetrafluoroethylene (TFE), the safety related aspects of the self-heating process of TFE must be taken into account. Simulations of this self heating process were performed with COMSOL Reaction Engineering Lab® and COMSOL® COMSOL Multiphysics®. A complex reaction net was employed, resulting in a model allows for a good agreement with experimentally achieved results. T2 - COMSOL Conference 2010 CY - Paris, France DA - 2010-11-17 KW - Heating KW - Free convection KW - Reactive flow KW - Gas reaction KW - Self ignition PY - 2010 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. SP - 1 EP - 7 AN - OPUS4-24174 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Wencke A1 - Feigl, Michael A1 - Dörfel, Ilona A1 - Saliwan Neumann, Romeo A1 - Nofz, Marianne A1 - Kranzmann, Axel T1 - Alumina coatings against carburization and oxidation under oxyfuel conditions T2 - 1st International conference on materials for energy CY - Karlsruhe, Germany DA - 2010-07-04 PY - 2010 SN - 978-3-89746-117-8 SP - 1012 AN - OPUS4-24179 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sarmiento Klapper, Helmuth A1 - Heyn, Andreas A1 - Goellner, J. T1 - La técnica de ruido electroquímico para la investigación de la corrosión localizada: del fenómeno a la aplicación N2 - En los últimos anos el registro y análisis del ruido electroquímico ha posibilitado importantes avances en la investigación de fenómenos de corrosión localizada tales como el picado y la corrosión en rendijas. Así mismo, esta técnica a abierto enormes posibilidades para el monitoreo in situ de tales procesos corrosivos en la industria. Sin ninguna duda, la posibilidad de registrar en tiempo real y con extrema sensibilidad los procesos de nucleación de la corrosión localizada, hace de la técnica de ruido electroquímico una invaluable herramienta para alcanzar una mejor comprensión de su origen y propagación. A continuación se discutirán las fuentes de ruido electroquímico relacionadas con la corrosión localizada así como los avances alcanzados para una confiable adquisición y análisis de la información electroquímica suministrada por las senales de ruido electroquímico y se ilustrarán con ejemplos prácticos las ventajas de la técnica de ruido electroquímico para la evaluación de la corrosión localizada. KW - Ruido electroquímico KW - Corrosión localizada KW - Acero inoxidable KW - Aluminio KW - Elektrochemisches Rauschen KW - Korrosion KW - Passivität KW - Lochkorrosion PY - 2010 IS - November SP - 28 EP - 30 CY - Houston, TX, USA AN - OPUS4-23398 LA - spa AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kloß, Heinz A1 - Marwitz, Christian A1 - Breitkreiz, Maxim T1 - Reibung - eine mehrskalige Beschreibung unter Berücksichtigung von Modellbetrachtungen, experimentellen Ergebnissen und Simulationsrechnungen KW - Reibung KW - Adhäsion KW - Deformation KW - Rauheit KW - Simulation KW - Reaktionsschicht KW - Friction KW - Adhesion KW - Roughness KW - Reaction layer PY - 2010 SN - 0724-3472 VL - 57 IS - 6 SP - 14 EP - 18 PB - Expert Verlag CY - Renningen AN - OPUS4-23356 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rabin, Ira A1 - Hahn, Oliver A1 - Wolff, Timo A1 - Mantouvalou, I. A1 - Kanngießer, B. A1 - Weinberg, G. T1 - Dead sea scrolls - development of the analysis methodology T2 - Modern approaches to the conservation and accessibility of cultural and historic monuments CY - St. Petersburg, Russia DA - 2009-10-20 KW - Dead sea scrolls KW - Conservation science KW - Non destructive testing PY - 2010 SN - 978-5-8192-0370-5 SP - 122 EP - 129 AN - OPUS4-23329 LA - rus AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nehrig, Marko A1 - Wille, Frank A1 - Droste, Bernhard A1 - Quercetti, Thomas A1 - Masslowski, Jörg-Peter A1 - Pope, R. T1 - Historical view and experiences with the crush test for light weight packages T2 - 16th International Symposium on the Packaging and Transport of Radioactive Materials PATRAM CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-23334 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beckmann, Jörg A1 - Berndt, Alexander A1 - Ewert, Uwe A1 - Schmidt, R. T1 - Roadmap for a European Certification System for CBRNE Sensor Systems and Devices T2 - 2nd CREATIF Workshop European Certification System for CBRNE Sensor Systems & Devices; AM CY - Berlin, Germany DA - 2010-10-05 PY - 2010 AN - OPUS4-23335 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Karkhin, V.A. A1 - Pittner, Andreas A1 - Schwenk, Christopher A1 - Rethmeier, Michael ED - Makhnenko, V.I. T1 - Heat source models in simulation of heat flow in fusion welding T2 - 5th International Conference - Mathematical modelling and information technologies in welding and related processes CY - vil. Katsiveli, Crimea, Ukraine DA - 2010-05-25 PY - 2010 SN - 978-966-8872-15-0 SP - 56 EP - 60 CY - Kiev, Ukraine AN - OPUS4-23382 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Komann, Steffen A1 - Droste, Bernhard A1 - Wille, Frank T1 - Transport of large nuclear power plant components - experiences in mechanical design assessment T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Mechanische Bewertung KW - Radioaktives Material KW - Numerische Analyse PY - 2010 SP - 1 EP - 8(?) AN - OPUS4-23383 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Komann, Steffen A1 - Neumann, Martin A1 - Ballheimer, Viktor A1 - Wille, Frank A1 - Weber, Mike A1 - Qiao, Linan A1 - Droste, Bernhard T1 - Mechanical assessment within type B packages approval - the application of static and dynamic calculation approaches T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Mechanische Bewertung KW - Radioaktives Material KW - Numerische Analyse PY - 2010 SP - 1 EP - 8(?) AN - OPUS4-23384 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pospiech, D. A1 - Korwitz, A. A1 - Starke, S. A1 - Komber, H. A1 - Ciesielski, M. A1 - Döring, M. A1 - Sablong, R. A1 - Koning, C. A1 - Brehme, Sven T1 - Phosphorus-containing copolyesters with enhanced flame retardancy T2 - Polycondensation 2010 CY - Kerkrade, Netherlands DA - 2010-09-05 PY - 2010 AN - OPUS4-23391 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pelkner, Matthias A1 - Blome, M. A1 - Reimund, Verena A1 - Thomas, Hans-Martin A1 - Kreutzbruck, Marc T1 - Flux Leakage Measurements for Defect Characterization Using a High Precision 3-Axial GMR Magnetic Sensor T2 - The 15th International Workshop on Electromagnetic Nondestructive Evaluation (ENDE) CY - Szczecin, Poland DA - 2010-06-13 PY - 2010 AN - OPUS4-23365 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Griesche, Axel ED - Kuhlmann, H.C. T1 - Topical team ATLAS - atomic transport in liquids and semiconductors KW - Diffusion KW - Topical team KW - ESA KW - Alloy KW - Semiconductor PY - 2010 SN - 2219-5602 VL - December IS - 7 SP - 19 AN - OPUS4-23468 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rolle, Annette A1 - Neumeyer, Tino A1 - Droste, Bernhard T1 - Testing of sealed radioactive sources at BAM N2 - Requirements and test programs for sealed radioactive sources are specified in international standards for safety in transport and in use. Sealed sources which are approved as special form radioactive material according to the Transport Regulations, IAEA Safety Standards TS-R-1, must be able to withstand mechanical (9 m drop, percussion and bending) and thermal (800°C heat) tests without loss of radioactive content. The International Standard ISO 2919 provides a set of tests which classifies the sources for their safety in use. Performance tests specified in this standard are temperature (high and low), external pressure, impact, vibration and puncture tests. Each test can be applied at different levels of intensity depending on typical usage. As a criterion of pass or fail, leakage testing has to be done after each test. The poster gives an overview of BAM s comprehensive test equipment and experience in testing sealed radioactive sources. T2 - 3rd European IRPA Congress CY - Helsinki, Finland DA - 2010-06-14 KW - Radioactive KW - Sealed sources KW - Testing PY - 2010 SN - 978-952-478-551-8 IS - P18-07 SP - 2749 EP - 2754 CY - Helsinki AN - OPUS4-23420 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Frübing, P. A1 - Wang, F. A1 - Günter, C. A1 - Gerhard, R. A1 - Wegener, M. A1 - Jaunich, Matthias A1 - Stark, Wolfgang T1 - Relation between dielectric and mechanical losses in ferroelectric poly(vinylidene fluoride - hexafluoropropylene) films N2 - The temperature dependences of dielectric permittivity and elastic modulus of poly(vinylidene fluoride - hexafluoropropylene) (P(VDF-HFP)) are compared and explained by use of structural data obtained by differential scanning calorimetry and X-ray analysis. Special emphasis is put on the effect of uniaxial stretching which renders the polymer ferroelectric. It is shown that dielectric and mechanical relaxations at the glass transition (aa relaxation) are closely related and not significantly affected by stretching. It is further confirmed that stretching destroys the non-polar spherulitic crystalline structure and produces relatively small-sized polar crystallites. This manifests in the disappearence of the so-called ac relaxation which is associated to molecular motions within the spherulitic crystalline lamellae. However, there are discrepancies between dielectric and mechanical losses above the glass transition which point towards a still not described structural transition. T2 - 10th IEEE International conference on solid dielectrics (ICSD) CY - Potsdam, Germany DA - 2010-07-04 KW - Poly(vinylidene(fluoride - hexafluoropropylene) KW - P(VDF-HFP) KW - Ferroelectric polymer KW - Dielectric relaxation KW - Dynamic mechanical analysis KW - Uniaxial stretching PY - 2010 SN - 978-1-4244-7945-0 DO - https://doi.org/10.1109/ICSD.2010.5567936 SP - 1 EP - 4(?) AN - OPUS4-23421 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lühl, Lars A1 - Hahn, Oliver A1 - Hesse, B. A1 - Malzer, W. A1 - Mantouvalou, I. A1 - Zizak, I. A1 - Kanngießer, Birgit T1 - 3D Micro-X-Ray Absorption Near Edge Spectroscopy (Xanes) T2 - EXRS CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-23423 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mahlkow, S. A1 - Lühl, Lars A1 - Zizak, I. A1 - Aloupi, E. A1 - Kanngießer, B. T1 - Micro-X-Ray Absorption Near Edge Spectroscopy (Xanes) at attic sherds ans their replicas T2 - 2nd Joint BER II and BESSY II Users`Meeting CY - Berlin, Germany DA - 2010-12-09 PY - 2010 AN - OPUS4-23424 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rabin, Ira A1 - Schütz, Roman A1 - Kindzorra, Emanuel A1 - Schade, U. A1 - Hahn, Oliver A1 - Weinberg, G. A1 - Lasch, P. T1 - Analysis of an antique alum tawed parchment Temple scroll T2 - Leather and related Material Working Group, Multidisciplinary Conservation: A Holistic View for Historic Interiors, ICOM-CC Interim Meeting CY - Rome, Italy DA - 2010-03-23 PY - 2010 AN - OPUS4-23425 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Maierhofer, Christiane T1 - Verbesserung der zerstörungsfreien Prüfung vor Ort durch den Einsatz bildgebender Verfahren T2 - Wissenschaft trifft Handwerk CY - Berlin, Germany DA - 2010-09-22 PY - 2010 AN - OPUS4-23497 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rabin, Ira A1 - Schütz, Roman A1 - Masic, A. A1 - Hahn, Oliver A1 - Kindzorra, Emanuel A1 - Wolff, Timo A1 - Emmerling, Franziska A1 - Schade, U. A1 - Weinberg, G. T1 - Chemical composition of the Temple scroll 11Qa T2 - COST D 42 Qumran meeting CY - Jerusalem, Israel DA - 2010-05-25 PY - 2010 AN - OPUS4-23438 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rabin, Ira A1 - Padoan, R. A1 - Klein, Marvin E. A1 - de Bruin, G. A1 - Steemers, Ted A. G. T1 - Quantitative Hyperspectral Imaging of the Dead Sea Scrolls T2 - COST D 42 Qumran meeting CY - Jerusalem, Israel DA - 2010-05-25 PY - 2010 AN - OPUS4-23439 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beyer, Katrin A1 - Kannengießer, Thomas A1 - Griesche, Axel T1 - In-situ analysis of hydrogen in ferrous alloys using neutron radiograhphy T2 - Colloquium, University of Pretoria CY - Pretoria, South Africa DA - 2010-10-01 PY - 2010 AN - OPUS4-23445 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beyer, Katrin A1 - Kannengießer, Thomas A1 - Griesche, Axel A1 - Schillinger, Burkhard T1 - In-situ analysis of hydrogen in austenitic stainless steel using neutron imaging T2 - WCNR 9th World Conference on Neutron Radiography CY - Rustenburg, South Africa DA - 2010-10-03 PY - 2010 AN - OPUS4-23446 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rabin, Ira T1 - Unveiling the secrets oy Qumran T2 - BESSY User Meeting CY - Berlin, Germany DA - 2010-12-09 PY - 2010 AN - OPUS4-23433 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rabin, Ira A1 - Schütz, Roman A1 - Fratzl, P. A1 - Masic, A. T1 - In-situ damage assessment of collagen within ancient manuscripts written on parchment: a ploarized Raman spectroscopy approach T2 - Konferenz: ICORS 2010: XXII International Conference on Raman Spectroscopy CY - Boston, MA, USA DA - 2010-08-08 PY - 2010 AN - OPUS4-23434 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rabin, Ira A1 - Pappalardo, G. A1 - Pappalardo, L. A1 - Rizzo, F. A1 - Romano, F.P. T1 - PIXE Study of Dead Sea Scrolls samples T2 - The 12th International Conference on Particle Induced X-ray Emission and its Analytical Applications (PIXE 2010), University of Surrey CY - Guildford, England DA - 2010-06-27 PY - 2010 AN - OPUS4-23437 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günther, U. A1 - Baden, M. A1 - Komann, Steffen A1 - Nitz, Thilo T1 - Performance and restrictions of non-destructive testing (NDT) within the quality surveillance during manufacturing of type B-packages T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Mechanische Bewertung KW - Radioaktives Material KW - Numerische Analyse KW - Qualitätsüberwachung PY - 2010 SP - 1 EP - 8 AN - OPUS4-23675 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pfennig, Anja A1 - Kranzmann, Axel T1 - Integrity of casing and injection pipe steels during carbon capture and storage CCS N2 - During carbon capture and storage (CCS) CO2-corrosion of pipe steels is a relevant safety issue when emission gasses are compressed in deep geological layers. The reliability of the steels 42CrMo4, X20Cr13, X46Cr13 and X35CrMo17 is demonstrated in long term laboratory experiments up to 2 years of exposure time. Testings were carried out at ambient pressure under an equivalent corrosive environment as found at the geological onshore CCS-site at Ketzin, Germany (T=60 °C, aquifer water). T2 - i-SUP 2010 (Innovation for Sustainable Production) CY - Bruges, Belgium DA - 2010-04-18 KW - CCS KW - Corrosion rate KW - Corrosion layer KW - Steel KW - Pipeline PY - 2010 SP - 1 EP - 5(?) AN - OPUS4-23620 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank A1 - Droste, Bernhard A1 - Müller, Karsten A1 - Zencker, Uwe T1 - Mechanical design assessment approaches of actual spent fuel and HLW transport package designs T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Design testing KW - Transport packages KW - Numerical analysis PY - 2010 SP - 1 EP - 8(?) AN - OPUS4-23590 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc A1 - Boehm, Rainer A1 - Kitze, Jessica A1 - Eggers, H. A1 - Böwe, M. T1 - Using UT-SAFT for analysis of stress corrosion cracking N2 - Stress corrosion cracking is a transcrystalline or intercrystalline crack formation in materials which occurs under the influence of static tensile stress or residual stress and a specific aggressive medium such as chloride containing substances. This special sort of crack formation is involved in complex crack configurations, which may only insufficiently be captured by conventional ultrasonic probes with fixed angles of incidence. Only a number of different beam angles produce sufficient reflection to reconstruct the complete defect shape from measured ultrasonic data. The SAFT algorithm, which was recently successfully used in many industrial NDT-applications, is a promising tool for the reconstruction process. In addition, the combination of phased array technique and SAFT was developed in several projects by BAM, Berlin. Investigations using phased array equipment were performed to look into crack configurations in test blocks with different surface curvatures. UT-SAFT has been used for the analysis of spark-eroded notches simulating stress corrosion cracks at the thermo sleeve weld of a nozzle. For comparison, UT-SAFT has also been applied for the analysis of real reflectors at the same position in a nozzle used in a power plant, which was repaired later on. SAFT-scans received from reconstructed ultrasonic measurement data confirm the practical usefulness of the SAFTalgorithm developed by BAM. T2 - 8th International conference on NDE in relation to structural integrity for nuclear and pressurised components CY - Berlin, Germany DA - 2010-09-29 KW - Stress corrosion cracking KW - Real and simulated cracks KW - D-nozzle KW - Phased array technique KW - SAFT reconstruction PY - 2010 SN - 978-3-940283-30-6 IS - DGZfP-BB 125 (Th.2.B.1) SP - 1 EP - 10 CY - Berlin AN - OPUS4-23594 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böllinghaus, Thomas T1 - Keynote Lecture: Hot cracking in austenitic stainless steel welds T2 - Hot cracking workshop CY - Columbus, OH, USA DA - 2010-03-17 PY - 2010 AN - OPUS4-23615 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böllinghaus, Thomas A1 - Mente, Tobias T1 - Heat treatments for sufficient hydrogen removal in high strength steel T2 - IIW Annual Assembly CY - Istanbul, Turkey DA - 2010-07-14 PY - 2010 AN - OPUS4-23601 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Materialforschung an der BAMline T2 - Seminar Strahlenphysikalische Anwendungen in Technik und Medizin CY - Vienna, Austria DA - 2010-01-13 PY - 2010 AN - OPUS4-23605 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe A1 - Reiners, Georg A1 - Lerche, D. A1 - Rietz, U. A1 - Niederwald, H. T1 - Centrifuge Technology: A Breakthrough in Adhesion Testing of Optical Coatings T2 - ICMCTF 2010 CY - San Diego, CA, USA DA - 2010-04-26 PY - 2010 AN - OPUS4-20038 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nooke, Alida A1 - Krüger, Hannes A1 - Hertwig, Andreas A1 - Krause, Andreas A1 - Beck, Uwe A1 - Lohse, Volkmar T1 - Surface Plasmon Enhanced Total Internat Reflection Ellipsometry for Detection and Monitoring of Hazardous Gases T2 - International Conference on Spectroscopic Ellipsometry (ICSE V) CY - Albany, NY, USA DA - 2010-05-23 PY - 2010 AN - OPUS4-20040 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bonse, Jörn A1 - Solis, J. A1 - Spielmann, Ch. A1 - Lippert, Th. A1 - Krüger, Jörg T1 - Damage mechanisms in thin film and bulk polymers upon NIR femtosecond pulse laser irradiation: sub-threshold processes and their implications for laser safety applications T2 - The Internation High-power Laser Ablation Conference 2010 CY - Santa Fe, NM, USA DA - 2010-04-18 PY - 2010 AN - OPUS4-20276 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Borowski, R. A1 - Neuschaefer-Rube, Ulrich A1 - Goebbels, Jürgen A1 - Kreienfeld, G. A1 - Krumrey, M. A1 - Danzebrink, H. A1 - Wrede, S. A1 - Buermann, L. T1 - Entwicklung von Verfahren zur zerstörungsfreie Qualitätskontrolle von Prüfkörpern, die im Rahmen der Qualitätssicherung an Röntgeneinrichtungen zur Untersuchung von Menschen verwendet werden T2 - 91. Deutscher Röntgenkongress CY - Berlin, Germany DA - 2010-05-12 PY - 2010 AN - OPUS4-20327 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rübner, Katrin A1 - Herbst, Tristan A1 - Jakubcová, Petra T1 - Saving natural resources by material recycling T2 - CESB 10 Central Europe towards Sustainable Building from Theory to Practice CY - Prague, Czech Republic DA - 2010-06-30 PY - 2010 AN - OPUS4-20594 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bonse, Jörn A1 - Beke, S. A1 - Sugioka, K. A1 - Midorikawa, K. T1 - Near-IR femtosecond and VUV nanosecond laser processing of TeO2 crystals in air T2 - SPIE Photonics West Conference: Laser Applications in Microelectronics and Optoelectronics Manufacturing XV CY - San Francisco, CA, USA DA - 2010-01-25 PY - 2010 AN - OPUS4-20558 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Harwardt, Michael A1 - Hentschel, Manfred P. T1 - Characterization of metal matrix composites by synchrotron refraction computed topography KW - Metal matrix composites KW - Refraction KW - Synchrotron radiation KW - Computed tomography KW - Analyzer based imaging KW - Diffraction enhanced imaging PY - 2010 DO - https://doi.org/10.4028/www.scientific.net/MSF.638-642.967 SN - 0255-5476 VL - 638-642 SP - 967 EP - 972 PB - Trans Tech Publications CY - Aedermannsdorf, Switzerland AN - OPUS4-20563 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kindrachuk, Vitaliy A1 - Fedelich, Bernard A1 - Leopold, Anne A1 - Becker, M. T1 - Simulation of Mechanical Behaviour in a Single-Crystal Nickel-Basis Superalloy at High Temperature T2 - Euro Superalloys 2010 CY - Freiburg, Germany DA - 2010-05-25 PY - 2010 AN - OPUS4-20572 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kruschwitz, Sabine A1 - Niederleithinger, Ernst A1 - Trela, Christiane A1 - Wöstmann, Jens T1 - Complex resistivity and radar investigation of building material: First results of field scale measurements N2 - Moisture ingress is one of major damaging factors for masonry buildings. As the complex resistivity (CR) is sensitive to textural properties as well as to the pore fluid chemistry of wet porous media, its non-destructive application can provide helpful information for conservators. In a comprehensive laboratory study it has been shown that CR might even be able to distinguish between salt content and saturation degree in only one measurement. The combined use of electrical and electromagnetic measurement techniques in two field-scale flooding experiments has shown some unexpected differences. Possible reasons are discussed and it is shown that bringing together the information of both methods leads to a clearer picture. KW - Complex resistivity KW - Ground penetrating radar KW - Non-destructive testing KW - Masonry KW - Salt and moisture damage PY - 2010 DO - https://doi.org/10.2478/s11600-009-0019-4 SN - 1895-6572 SN - 1895-7455 VL - 58 IS - 1 SP - 96 EP - 113 PB - Springer CY - Warsaw AN - OPUS4-20575 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe A1 - Reiners, Georg A1 - Lerche, D. A1 - Rietz, Uwe T1 - Messung der Schichthaftung mit der Zentrifugenmethode T2 - Nano-Cluster Bodensee (NCB) CY - St. Gallen, Switzerland DA - 2010-01-19 PY - 2010 AN - OPUS4-20605 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Isecke, Bernd T1 - Bedingungen für den schadensfreien Einsatz von nichtrostenden Stählen T2 - VDeH Tagung nichtrostender Stähle CY - Düsseldorf, Germany DA - 2010-06-08 PY - 2010 AN - OPUS4-21397 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Klimakow, Maria A1 - Rademann, K. A1 - Emmerling, Franziska T1 - Towards novel pseudo-polymorphs of nifedipine: elucidation of a slow crystallization process N2 - The crystallization of nifedipine was studied by means of synchrotron-X-ray diffraction, single-crystal X-ray structural analysis, and Raman spectroscopy. The results of slow evaporation (24 h in minimum) using dimethyl sulfoxide (DMSO) are presented. Since fast crystallization processes (typically minutes) in different solvents always led to the final formation of the thermodynamically most stable α-polymorph of nifedipine, we observed a novel pseudo-polymorph due to slow crystallization from DMSO. The single-crystal X-ray structure of the solvated species nifedipine·DMSO (1:1) is reported for the first time. In addition, the crystallization process on surfaces was followed by means of light microscopy and environmental scanning electron microscopy (ESEM) coupled with energy-dispersive X-ray spectroscopy (EDS) analysis. Different diffractions pattern and Raman spectra were observed for crystals grown from stock solution and those obtained by drying the solution on soda lime silicate surfaces. KW - Synchrotron radiation KW - Polymorphism KW - Crystallization KW - Nifedipine PY - 2010 DO - https://doi.org/10.1021/cg100186v SN - 1528-7483 VL - 10 IS - 6 SP - 2693 EP - 2698 PB - American Chemical Society CY - Washington, DC, USA AN - OPUS4-21398 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rethmeier, Michael A1 - Gumenyuk, Andrey A1 - Gook, Sergej T1 - Weldability of thick walled low carbon steels using high power laser hybrid welding T2 - 73rd Laser materials processing conference CY - Osaka, Japan DA - 2010-05-25 PY - 2010 SN - 978-4-947684-74-5 SP - 3 EP - 18 AN - OPUS4-21399 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Siegel, David A1 - Troyanov, S. A1 - Noack, J. A1 - Emmerling, Franziska A1 - Nehls, Irene T1 - Alternariol N2 - In the title compound (systematic name: 3,7,9-trihydroxy-1-methyl-6H-benzo[c]chromen-6-one), C14H10O5, the methyl group is shifted out of the molecular plane due to a steric collision, thus causing a slight twist of the benzene rings. The molecular structure is stabilized by an intramolecular O-H...O hydrogen bond, generating an S(6) ring. In the crystal, molecules are connected by intermolecular O-H...O hydrogen bonds into a three-dimensional network. KW - Alternariol KW - Kristallstruktur PY - 2010 DO - https://doi.org/10.1107/S1600536810017502 SN - 1600-5368 VL - 66 IS - 6 SP - o1366 PB - Munksgaard CY - Copenhagen AN - OPUS4-21400 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pauli, Jutta A1 - Brehm, Robert A1 - Spieles, Monika A1 - Kaiser, W.A. A1 - Hilger, I. A1 - Resch-Genger, Ute T1 - Novel fluorophores as building blocks for optical probes for in vivo near infrared fluorescence (NIRF) imaging N2 - Aiming at the identification of new fluorescent reporters for targeted optical probes, we assessed the application-relevant features of a novel asymmetric cyanine, DY-681, in comparison to the only clinically approved dye indocyanine green (ICG), the golden imaging standard Cy5.5, and the asymmetric cyanine DY-676 successfully exploited by us for the design of different contrast agents. This comparison included the analysis of the spectroscopic properties of the free fluorophores and their thermal stability in aqueous solution as well as their cytotoxic potential. In addition, the absorption and emission features of IgG-conjugated DY-681 were examined. The trimethine DY-681 exhibited spectral features closely resembling that of the pentamethine Cy5.5. Its high thermal stability in phosphate buffer saline (PBS) solution in conjunction with its low cytotoxicity, reaching similar values as determined for Cy5.5 and DY-676, renders this dye more attractive as ICG and, due to its improved fluorescence quantum yield in PBS, also superior to DY-676. Although in PBS, Cy5.5 was still more fluorescent, the fluorescence quantum yields (Φf) of DY-681 and Cy5.5 in PBS containing 5 mass-% bovine serum albumin (BSA) were comparable. Labeling experiments with DY-681 and the model antibody IgG revealed promisingly high Φf values of the bioconjugated dye. KW - Fluorescence KW - Cyanine dye KW - Cytotoxicity KW - Stability KW - In vivo fluorescence imaging KW - Quantum yield KW - Contrast agent KW - Optical probe PY - 2010 DO - https://doi.org/10.1007/s10895-010-0603-7 SN - 1053-0509 SN - 1573-4994 VL - 20 IS - 3 SP - 681 EP - 693 PB - Plenum Publ. Corp. CY - New York, NY AN - OPUS4-21401 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nitsche, Michael T1 - Gremien der Akkreditierung und Einbindung in Europa T2 - Veranstaltung des VMPA zum Thema "Die DAkkS - Umbruch in der deutschen Akkreditierung" CY - Aachen, Germany DA - 2010-06-10 PY - 2010 AN - OPUS4-21402 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Würsig, Andreas T1 - Tankcontainer oder ortsbeweglicher Tank? Tankarten im Landverkehr T2 - 60. WSP - Fachseminar Beförderung gefährlicher Güter/Umweltschutz am 14.06.2010 CY - Hamburg, Germany DA - 2010-06-14 PY - 2010 AN - OPUS4-21404 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Würsig, Andreas T1 - See-Tanks im Landverkehr T2 - 60. WSP-Fachseminar Beförderung gefährlicher Güter/Umweltschutz am 14.06.2010 CY - Hamburg, Germany DA - 2010-06-14 PY - 2010 AN - OPUS4-21405 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dietrich, Paul A1 - Horlacher, T. A1 - Gross, Thomas A1 - Castelli, R. A1 - Rurack, Knut A1 - Seeberger, P. H. A1 - Unger, Wolfgang T1 - Optimization of carbohydrate microarray performances T2 - Bunsentagung 2010 "Interfacial Systems Chemistry: Out of the Vacuumm, Through the Liquid, Into the Cell" CY - Bielefeld, Germany DA - 2010-05-13 PY - 2010 AN - OPUS4-21366 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nie, Yaru A1 - Hübert, Thomas T1 - Tailoring the mechanical and electrical properties of epoxy/carbon nanofiber (CNF) composites by chemical modification of CNFs T2 - E-MRS 2010 Spring Meeting CY - Strasbourg, France DA - 2010-06-07 PY - 2010 AN - OPUS4-21367 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hübert, Thomas A1 - Lang, Cindy T1 - Artificial fruits - post harvest online monitoring of agricultural food by measuring humidity and temperature T2 - TEMPMEKO+ISHM 2010 (Joint International Symposium on Temperature, Humidity, Moisture and Thermal Measurements in Industry and Science) CY - Portorož, Slovenia DA - 2010-05-31 PY - 2010 AN - OPUS4-21368 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hertel, Horst T1 - Anfälligkeit von Holz nach unterschiedlicher Vorbehandlung gegenüber dem Hausbockkäfer T2 - 26. Holzschutztagung 2010 CY - Göttingen, Deutschland DA - 2010-04-22 KW - Verhalten KW - Holzwahl KW - Holzqualität KW - Laborverfahren PY - 2010 SP - 1 EP - 11(?) CY - Göttingen AN - OPUS4-21369 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hertel, Horst T1 - DIN 68800-3, Vorbeugender Schutz von Holz mit Holzschutzmitteln T2 - 26. Holzschutztagung 2010 CY - Göttingen, Deutschland DA - 2010-04-22 KW - DIN KW - Holzschutz KW - Biozide KW - Holzschutzmittel PY - 2010 SP - 1 EP - 5(?) CY - Göttingen AN - OPUS4-21370 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Siegel, David A1 - Merkel, Stefan A1 - Koch, Matthias A1 - Nehls, Irene T1 - Quantification of the Alternaria mycotoxin tenuazonic acid in beer N2 - Tenuazonic acid (TA) is a major water soluble Alternaria mycotoxin. In the present work, a method for the quantification of TA in beer by liquid chromatography-ion-trap multistage mass spectrometry after derivatization with 2,4-dinitrophenylhydrazine is described. The method is based on a rapid workup procedure and features a LOD of 2 µg/kg without preconcentration using 400 mg of sample. Validation was performed for a working range of 8-500 µg/kg. A total of 43 beers of different brewing styles (pilsener, wheat beer, bock beer, dark beer and alcohol free beer) was analysed. TA was detected in 37 samples, 16 samples were above the LOQ. An average content of 11 µg/kg was found, the highest incidence being 175 ± 13 µg/kg. To our knowledge, this is the first report on the occurrence of TA in beer and beverages in general. KW - Tenuazonic acid KW - Mycotoxin KW - Beer KW - 2,4-Dinitrophenylhydrazine KW - Derivatization KW - Liquid chromatography/electrospray ionisation ion-trap multistage mass Spectrome PY - 2010 DO - https://doi.org/10.1016/j.foodchem.2009.10.070 SN - 0308-8146 VL - 120 IS - 3 SP - 902 EP - 906 PB - Elsevier CY - Amsterdam [u.a.] ; Jena AN - OPUS4-21372 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Siegel, David A1 - Merkel, Stefan A1 - Bremser, Wolfram A1 - Koch, Matthias A1 - Nehls, Irene T1 - Degradation kinetics of the Alternaria mycotoxin tenuazonic acid in aqueous solutions N2 - The degradation kinetics of the Alternaria mycotoxin tenuazonic acid (l-TA) in aqueous buffer were studied over a period of 4 months at different pH levels (3.5 and 7.0) and temperatures (4, 25 and 40°C). l-TA and its degradation products were quantified by newly developed high-performance liquid chromatography methods with UV or electrospray multistage mass spectrometry detection. At pH 3.5, significant degradation occurred at 25 and 40°C, the respective l-TA half-lives being 73.8±0.4 and 14.0±0.1 days. Two degradation processes, epimerization and hydrolysis, were evaluated kinetically. The hydrolytically formed iso-deacetyl TA (iso-DTA, epimeric mixture) was found to be the stable end product of l-TA degradation under the conditions of this study. This indicates that iso-DTA as well as the l-TA epimer u-TA are formed in aqueous beverage matrices. KW - Tenuazonic acid KW - Alternaria KW - Epimerization KW - Degradation KW - Kinetics PY - 2010 DO - https://doi.org/10.1007/s00216-009-3288-5 SN - 1618-2642 SN - 1618-2650 VL - 397 IS - 2 SP - 453 EP - 462 PB - Springer CY - Berlin AN - OPUS4-21373 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Mix, Renate A1 - Schulze, Rolf-Dieter A1 - Rau, A. T1 - Ultra-thin polymer layer deposition by aerosol-dielectric barrier discharge (DBD) and electrospray ionization (ESI) at atmospheric pressure N2 - Polyolefins are chemically inert and do not adhere well to metals, polymers or inorganics. To overcome this problem, polyolefin surfaces were modified thermally, plasmachemically, or by flame treatment with different oxygen-containing groups, however, unfortunately, such treatments were accompanied by undesired, adhesion lowering polymer degradation. To solve this dilemma, solutions of synthetic polymers and copolymers were prepared, sprayed into the barrier discharge or electrosprayed without discharge and deposited as thin adhesion-promoting layers. The deposited polymer layers from poly(vinylamine), poly(ethylene glycol)-poly(vinyl alcohol) copolymers and poly(acrylic acid) were endowed with monotype functional groups. Using the aerosol - dielectric barrier discharge only a fraction of functional groups survived the deposition process in contrast to the electrospray in which all functional groups were retained. KW - Polymer surface modification KW - Dielectric barrier discharge KW - Polymer aerosols KW - Electrospray deposition KW - Adhesion-promoting layers PY - 2010 DO - https://doi.org/10.1163/016942409X12598231568429 SN - 0169-4243 SN - 1568-5616 VL - 24 IS - 7 SP - 1329 EP - 1350 PB - VNU Science Press CY - Utrecht AN - OPUS4-21374 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Proske, Matthias A1 - Recknagel, Christoph A1 - Koch, Matthias A1 - Nehls, Irene T1 - Bestimmung von Silan-Coupling-Agents auf Nachstreumittelgemischen mittels Headspace-GC/MS sowie Thermodesorption-GC/FID T2 - Wissenschaftliches Meeting (BaSt - Bundesanstalt für Straßenwesen) CY - Bergisch Gladbach, Germany DA - 2010-06-10 PY - 2010 AN - OPUS4-21375 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kannengießer, Thomas A1 - Tiersch, Nico T1 - Comparative study between hot extraction methods and mercury method - a national round robin test N2 - A round robin test is presented comprising comparative measurements using hot extraction at different degassing temperatures as well as the mercury method. A major focus of the investigation was verification of the maximum degassing temperature for analysing the diffusible hydrogen in weld metals with bcc-lattice structure. The analyses were executed using a basic stick electrode with high weld metal cracking, a high-alloyed supermartensitic filler wire with different hydrogen contents in the shielding gas and a high-strength solid wire. The results show that degassing temperatures of 150 degrees C and 400 degrees C do not lead to an increase in the measured contents of diffusible hydrogen as compared to measurements at room temperature. The measuring techniques and procedures specified in ISO/DIS 3690:2009 for determining the diffusible hydrogen content in weld metals with bcc-lattice structure yield approximately the same results. This is to say that the mercury method and the hot extraction methods with thermal conductivity detector (TCD) can be regarded as equivalent reference methods. KW - Hydrogen KW - Mercury KW - Measurement KW - Round robin test KW - Hot extraction KW - ISO 3690 PY - 2010 SN - 0043-2288 SN - 1878-6669 VL - 54 IS - 5/6 SP - R108 EP - R114 PB - Springer CY - Oxford AN - OPUS4-21336 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Piechotta, Christian A1 - Seeger, Stefan A1 - Deubel, Jan A1 - Krause, Ulrich T1 - Chemical analysis of spruce wood during thermal exposure T2 - Joint Symposium on Thermal Analysis and Calorimetry, Dresden 26-28 May 2010 CY - Dresden, Germany DA - 2010-05-26 PY - 2010 AN - OPUS4-21337 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Goering, Harald T1 - Torsions pendulum and DMA measurements of PC sticks T2 - Joint Symposium on Thermal Analysis and Calorimetry CY - Dresden, Germany DA - 2010-05-26 PY - 2010 AN - OPUS4-21338 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Raspe, Tina A1 - Krause, Ulrich T1 - Thermoanalytical investigations in the Smoke Density Chamber T2 - Joint Symposium on Thermal Analysis and Calorimetry CY - Dresden, Germany DA - 2010-05-26 PY - 2010 AN - OPUS4-21339 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tscheuschner, Frank A1 - Eiben, Mario T1 - Dangerous Goods Database T2 - BAM-Symposium "Packaging Research and Development" (IAPRI) CY - Berlin, Germany DA - 2010-05-11 PY - 2010 AN - OPUS4-21340 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schendler, Thomas T1 - Merkblatt "Sicherheit in Biogasanlagen" der Kommission für Anlagensicherheit (KAS) T2 - BAM/UBA-Behörden-Erfahrungsaustausch, BAM CY - Berlin, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21341 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schendler, Thomas A1 - Wick, T1 - Großbrand in einem Chemiepark T2 - 11. Meinungs- und Erfahrungsaustausch für Sachverständige nach § 29a Abs. 1 BlmschG und Störfallbeauftragte, VdS Schadensverhütung CY - Cologne, Germany DA - 2010-07-08 PY - 2010 AN - OPUS4-21342 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wilrich, Cordula T1 - Die CLP-Verordnung - Physikalische Gefahren T2 - Fortbildungsveranstaltung bei der BGR - Bundesanstalt für Geowissenschaften und Rohstoffe CY - Hanover, Germany DA - 2010-05-20 PY - 2010 AN - OPUS4-21343 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Lüth, Peter A1 - Michael-Schulz, Heike A1 - Brandes, E. A1 - Uhlig, S. T1 - Center for quality assurance for testing of dangerous goods and hazardous substances - Brief information about status and activities T2 - IGUS ENERGETIC AND OXIDISING SUBSTANCES WORKING GROUP CY - Tokyo, Japan DA - 2010-05-26 PY - 2010 AN - OPUS4-21344 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Koch, Matthias A1 - Labsch, Erika A1 - Köppen, Robert A1 - Witt, Angelika A1 - Nehls, Irene T1 - Feuchtebestimmung in Lebensmitteln durch coulometrische Karl-Fischer-Titration nach thermischer Wasserfreisetzung KW - KFT KW - Wassergehalt KW - Standardaddition PY - 2010 SN - 0012-0413 SN - 1869-2214 VL - 106 IS - Mai SP - 251 EP - 254 PB - Wiss. Verl.-Ges. CY - Stuttgart AN - OPUS4-21351 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kannengießer, Thomas A1 - Brauser, Stephan A1 - Kromm, Arne T1 - Synchrotron diffraction for in-situ characterizations of materials behaviour T2 - 3rd Inter-university research seminar (IURS 2010) - Advances in welding and joining CY - Pusan, Korea DA - 2010-05-13 KW - In-situ diffraction KW - Phase transformation KW - High strength steel KW - Residual stress PY - 2010 SP - 127 EP - 131 CY - Pusan, Korea AN - OPUS4-21352 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Burkert, Andreas A1 - Fischer, Joachim A1 - Zietelmann, Christina A1 - Lehmann, Jens T1 - Erhaltung des Korrosionsschutzes - Wie viel Pflege braucht der Stahl? KW - Nichtrostender Stahl KW - Reinigung KW - Pflege KW - Desinfektion KW - Korrosionsbeständigkeit PY - 2010 VL - 3 SP - 14 EP - 19 PB - Schweizerischer Verein für Schweisstechnik CY - Basel AN - OPUS4-21353 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Buchholz, Uwe A1 - Petersson, B.A.T. T1 - Computation of the surface velocity of a cylindrical layered dielectric device caused by partial discharges T2 - DAGA 2010 - 36. Jahrestagung für Akustik CY - Berlin, Deutschland DA - 2010-03-15 PY - 2010 SN - 978-3-9808659-8-2 SP - 153 EP - 154 CY - Berlin AN - OPUS4-21354 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sobala, J. A1 - Zawadzka-Malota, I. A1 - Dorazil, T. A1 - Jarosz, J. A1 - von Oertzen, Alexander A1 - Schwarz, Silke A1 - Aufauvre, L. T1 - Tests of toxic fumes of high explosives performed within the international testing programme ITP 2009 T2 - International conference blasting techniques 2010 CY - Stará Lesná, Slovakia DA - 2010-05-20 KW - Toxic fumes KW - Explosives PY - 2010 SN - 978-80-970265-2-3 SP - 245 EP - 253 AN - OPUS4-21355 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krischok, Frank T1 - Internationale Regelwerke und deren Erarbeitung; Übergang vom ADNR auf das ADN, allgemeine Einführung in das ADN; nationale Vorschriften und angrenzende Rechtsbereiche T2 - Forbildungsseminar "Beförderung gefährlicher Güter auf Binnengewässern" CY - Hanover, Germany DA - 2010-05-18 PY - 2010 AN - OPUS4-21356 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krischok, Frank T1 - Gefahrgüter und deren gefährliche Eigenschaften; Zuordnung der Gefahrgüter zu Klassen; Anforderungen zu Verpackung und Kennzeichnung T2 - Fortbildungsseminar "Beförderung gefährlicher Güter auf Binnengewässern" CY - Hanover, Germany DA - 2010-05-18 PY - 2010 AN - OPUS4-21357 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Oliver A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Riedel, Maren A1 - Christoph, Gabriele T1 - Assessment of total petrol hydrocarbon mobility in soils using leaching tests T2 - Urban Environment Symposium CY - Gothenburg, Sweden DA - 2010-06-09 PY - 2010 N1 - Geburtsname von Riedel, Maren: Kolepki, M. - Birth name of Riedel, Maren: Kolepki, M. AN - OPUS4-21358 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter A1 - Heitkamp, D. T1 - Test data for new N-rich organic compounds T2 - IGUS Energetic and Oxidising Substances (EOS) Working Group Meeting CY - Tokyo, Japan DA - 2010-05-26 PY - 2010 AN - OPUS4-21359 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter A1 - Berger, Anka T1 - Explosive Properties and Thermal Hazards of Azodicarboxylates T2 - IGUS Energetic and Oxidising Substances (EOS) Working Group Meeting CY - Tokyo, Japan DA - 2010-05-26 PY - 2010 AN - OPUS4-21360 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Michael-Schulz, Heike T1 - Problems encountered comparing UN-Test H.2 und UN-Test H.4 results T2 - IGUS Energetic and Oxidising Substances (EOS) Working Group Meeting CY - Tokyo, Japan DA - 2010-05-26 PY - 2010 AN - OPUS4-21361 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter T1 - DSC: Thermal stability of dilauroylperoxide T2 - IGUS Energetic and Oxidising Substances (EOS) Working Group Meeting CY - Tokyo, Japan DA - 2010-05-26 PY - 2010 AN - OPUS4-21362 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Binner, Richard A1 - Homberg, U. A1 - Prohaska, S. A1 - Witt, K. J. A1 - Kalbe, Ute A1 - Berger, Wolfgang T1 - Identification of descriptive parameters of gradated soils using experiments and CT Data T2 - European Geosciences Union General Assembly 2010 CY - Vienna, Austria DA - 2010-05-02 PY - 2010 AN - OPUS4-21363 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Michael-Schulz, Heike T1 - Modified Setup of 20-L-Sphere of Determination of Safety Characteristics of Nano Powders T2 - 17th CY - Tokyo, Japan DA - 2010-05-26 PY - 2010 AN - OPUS4-21364 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rybachuk, Maksym A1 - Hertwig, Andreas A1 - Weise, Matthias A1 - Sahre, Mario A1 - Männ, Marion A1 - Beck, Uwe A1 - Bell, J. M. T1 - Near infrared optical materials from polymeric amorphous carbon synthesized by collisional plasma process N2 - The synthesis of polymerlike amorphous carbon (a-C:H) thin-films by microwave excited collisional hydrocarbon plasma process is reported. Stable and highly aromatic a-C:H were obtained containing significant inclusions of poly(p-phenylene vinylene) (PPV). PPV confers universal optoelectronic properties to the synthesized material. That is a-C:H with tailor-made refractive index are capable of becoming absorption-free in visible (red)-near infrared wavelength range. Production of large aromatic hydrocarbon including phenyl clusters and/or particles is attributed to enhanced coagulation of elemental plasma species under collisional plasma conditions. Detailed structural and morphological changes that occur in a-C:H during the plasma synthesis are also described. KW - Kohlenstoffschichten KW - Plasmachemie KW - PA-CVD KW - Amorphous state KW - Carbon KW - Coagulation KW - Hydrogen KW - Optical materials KW - Plasma collision processes KW - Plasma deposition KW - Refractive index KW - Thin films PY - 2010 DO - https://doi.org/10.1063/1.3431292 SN - 0003-6951 SN - 1077-3118 VL - 96 IS - 21 SP - 211909-1 - 211909-3 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-21365 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Suhendra, Suhendra A1 - Rueter, Horst T1 - Heat Pipes - Suitable for Extinguishing Coal Fires? T2 - 2nd International Conference on Coal Fire Research ICCFR2 CY - Berlin, Germany DA - 2010-05-19 PY - 2010 AN - OPUS4-21386 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fischer, Ch. A1 - Wu, J. A1 - Meyer, U. A1 - Kong, B. A1 - Schmidt, Martin A1 - Wuttke, M. A1 - Drebenstedt, C. A1 - Barth, Uli A1 - Rueter, Horst T1 - Eight Years of Successful Bilateral Cooperation: Milestones of Sino-German Reasearch T2 - 2nd International Conference on Coal Fire Research ICCFR2 CY - Berlin, Germany DA - 2010-05-19 PY - 2010 AN - OPUS4-21387 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kus, J. A1 - Kaufhold, S. A1 - Klosa, D. A1 - Jianwei, M. A1 - Schmidt, Martin A1 - Suhendra, Suhendra T1 - Coal Fire Geothermometer: Controlling the Extent and Temperature Field of Underground Coal Fire Zones T2 - 2nd International Conference on Coal Fire Research ICCFR2 CY - Berlin, Germany DA - 2010-05-19 PY - 2010 AN - OPUS4-21388 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krietsch, Arne A1 - Schmidt, Martin A1 - Suhendra, Suhendra A1 - Helmis, Mario T1 - Laboratory Investigations on the Ignition and Burning Process of Coal: Fire Characteristics and Gas Emissions T2 - 2nd International Conference on Coal Fire Research ICCFR2 CY - Berlin, Germany DA - 2010-05-19 PY - 2010 AN - OPUS4-21389 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka A1 - Krause, Ulrich A1 - Krüger, Simone A1 - Malow, Marcus T1 - Vermeidung der Selbstentzündung von Deponiestoffen und Recyclingmaterialien T2 - BAM-Kolloquium Sicherheit in Technik und Chemie CY - Berlin, Germany DA - 2010-05-19 PY - 2010 AN - OPUS4-21390 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liebner, Christian A1 - Hieronymus, Hartmut A1 - Fischer, J. A1 - Klemm, E. T1 - Are microreaction devices inherently safe? An investigation on gas phase explosion propagation limits T2 - 13th International Symposium on Loss Prevention and Safety Promotion in the Process Industries CY - Bruges, Belgium DA - 2010-06-06 PY - 2010 AN - OPUS4-21391 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka A1 - Wehrstedt, Klaus-Dieter T1 - Assessment of the Explosive Properties and Thermal Hazards of Azodicarboxylates T2 - Joint Symposium on Thermal Analysis and Calorimetry GEFTA-PTKAT-CWGTA CY - Dresden, Germany DA - 2010-05-26 PY - 2010 AN - OPUS4-21392 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang A1 - Schulze, Dietmar T1 - Das Referenzelastomerprogramm der BAM T2 - Frühjahrstreffen der Bezirksgruppe Ost der Deutschen Kautschuk-Gesellschaft CY - Berlin, Germany DA - 2010-05-27 PY - 2010 AN - OPUS4-21393 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulze, Dietmar T1 - Die Ermittlung von Ozonkonzentrationen in der Prüfung der Ozonbeständigkeit von Elastomeren T2 - Frühjahrstagung der Bezirksgruppe Ost der Deutschen Kautschukgesellschaft CY - Berlin, Germany DA - 2010-05-27 PY - 2010 AN - OPUS4-21394 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Constantinescu, B. A1 - Vasilescu, A. A1 - Radtke, Martin A1 - Reinholz, Uwe T1 - Micro-SR-XRF studies for archaeological gold identification - the case of carpathian gold and romanian museal objects N2 - In the determination of the provenance of gold in archaeological artifacts, trace elements are more significant than the main components. Several minute fragments of natural Carpathian gold-placer and primary-and some very small (a few milligrams) fragments of archaeological items were studied using micro Synchrotron Radiation X-Ray Fluorescence (micro SR-XRF) at the BESSY Synchrotron Facility in Berlin, Germany. The goal of the study was to identify the trace elements characterizing Carpathian gold, looking especially at Sn, Sb, Pb and Te, and to determine if the gold in the archaeological items is native or refined. Applications to the authentication and provenance of nine Dacian gold bracelets, koson coins and two Bronze Age items are presented. KW - Gold KW - Provenance KW - Archeometry KW - Sy-XRF PY - 2010 DO - https://doi.org/10.1007/s00339-010-5624-1 SN - 0947-8396 VL - 99 IS - 2 SP - 383 EP - 389 PB - Springer CY - Berlin AN - OPUS4-21395 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feistkorn, Sascha A1 - Taffe, Alexander T1 - Die Anwendung der POD zum Gütenachweis von ZfPBau-Verfahren T2 - DGZfP-Jahrestagung CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21376 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Vom Rost befallen - was geht da vor? T2 - Sitzung des Gewerbevereins Mühlenbecker Land CY - Mühlenbecker Land, Germany DA - 2010-06-01 PY - 2010 AN - OPUS4-21380 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lohse, Volkmar A1 - Negendank, Detlef T1 - Betreiben von Gaswarnanlagen unter Berücksichtigung der Merkblätter T 021 und T 023 der BG RCI (BG-Chemie) sowie der TRBS 1201 Teil 3 T2 - MSA Austria Seminar CY - Vienna, Austria DA - 2010-06-01 PY - 2010 AN - OPUS4-21381 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schröder, Volkmar T1 - Sicherheitstechnische Aspekte des CCS-Verfahrens (Carbon Capture and Storage) T2 - Behördenerfahrungsaustausch 2010 CY - Berlin, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21382 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Richter, S. A1 - Poppenberg, J. A1 - Sokolowski, A. A1 - Dzyuba, E. V. A1 - Darlatt, Erik A1 - Unger, Wolfgang A1 - Schalley, C. A. T1 - The Belousov-Zhabotinsky reaction as an engine for the directed transportation of macroscopic particles on surfaces T2 - 24th Conference of the European Colloid and Interface Society CY - Prague, Czech Republic DA - 2010-09-05 PY - 2010 AN - OPUS4-21383 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Poppenberg, J. A1 - Richter, S. A1 - Traulsen, H.-H. A1 - Darlatt, Erik A1 - Sattler, D. A1 - Unger, Wolfgang A1 - Schalley, C. A. T1 - Layer-by-Layer Self Assembly of Macrocycles and Rotaxanes on Gold Surfaces T2 - 24th Conference of the European Colloid and Interface Society CY - Prague, Czech Republic DA - 2010-09-05 PY - 2010 AN - OPUS4-21384 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kromm, Arne T1 - Alloying Elements for Residual Stress Control during Welding of High Strength Steels T2 - 4. DFG Nachwuchsakademie Materials Science and Materials Engineering "Analysis and assessment of residual stresses on different length-scales" CY - Bad Arolsen, Germany DA - 2010-05-26 PY - 2010 AN - OPUS4-21385 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Ralf A1 - Reinsch, Stefan A1 - Deubener, J. T1 - Dissolution of alumina in GMC for LTCC T2 - 8th Pacific Rim Conf. on Ceramic and Glass Technology CY - Vancouver, Canada DA - 2010-05-31 PY - 2010 AN - OPUS4-21416 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosemann, Maik A1 - Reinsch, Stefan A1 - Müller, Ralf A1 - Lenhart, A. T1 - Dissolution Behavior of Alumina in Low Temperature Co-fired Ceramics T2 - 10th ESG Conf. together with 84th Annual Meeting of the DGG CY - Magdeburg, Germany DA - 2010-05-30 PY - 2010 AN - OPUS4-21417 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Merkel, Stefan A1 - Köppen, Robert A1 - Koch, Matthias A1 - Nehls, Irene T1 - Ergotalkaloide: Vorkommen und Nachweis in Lebensmitteln T2 - Tag der Chemie 2010, FU Berlin CY - Berlin, Germany DA - 2010-06-16 PY - 2010 AN - OPUS4-21419 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lischka, Susanne A1 - Piechotta, Christian A1 - Win, Tin A1 - Nehls, Irene T1 - Synthese isotopenmarkierter, interner Standards für die Bestimmung von Arsenspezies in Biota mittels LC-ESI-MS T2 - Tag der Chemie, FU Berlin CY - Berlin, Germany DA - 2010-06-16 PY - 2010 AN - OPUS4-21420 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kuhlich, Paul A1 - Piechotta, Christian A1 - Nehls, Irene T1 - New disinfection by-product of polycyclic musk AHTN T2 - Tag der Chemie, FU Berlin CY - Berlin, Germany DA - 2010-06-16 PY - 2010 AN - OPUS4-21421 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Girard-Lauriault, Pierre-Luc A1 - Lippitz, Andreas A1 - Wertheimer, M. R. A1 - Unger, Wolfgang T1 - Plasma polymer films for biomedical application T2 - Group Seminar of Prof. Dr. Peter Saalfrank, Universität Potsdam CY - Potsdam, Germany DA - 2010-05-26 PY - 2010 AN - OPUS4-21422 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Girard-Lauriault, Pierre-Luc A1 - Dietrich, Paul A1 - Gross, Thomas A1 - Unger, Wolfgang T1 - Quantitative Chemical Determination of Organic Layers using CDXPS: A Standard Experimental Procedure? T2 - Twelfth International Conference on Plamsa Surface Engineering CY - Garmisch-Partenkirchen, Germany DA - 2010-09-13 PY - 2010 AN - OPUS4-21423 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Girard-Lauriault, Pierre-Luc A1 - Retzko, Iris A1 - Swaraj, Sufal A1 - Matsubayashi, N. A1 - Gross, Thomas A1 - Mix, Renate A1 - Unger, Wolfgang T1 - Non-destructive In-Depth Chemical Characterization of Air Exposed Plasma Polymers by Energy Resolved XPS T2 - Twelfth International Conference on Plasma Surface Engineering CY - Garmisch-Partenkirchen, Germany DA - 2010-09-13 PY - 2010 AN - OPUS4-21424 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Krüger, Oliver A1 - Christoph, Gabriele T1 - Evaluierung des Schüttelverfahrens DIN 19527 für ausgewählte Böden und Bodenmaterialien verschiedener Gehalte für prioritäre organische Schadstoffe T2 - 22. Sitzung des Fachbeirates Bodenuntersuchungen des BMU/UBA CY - Dessau-Roßlau, Germany DA - 2010-06-08 PY - 2010 AN - OPUS4-21425 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Poli, Marco A1 - Grätz, Rainer A1 - Blanchard, Robert T1 - Venting of turbulent gas explosions T2 - 13th International Symposium on Loss Prevention 2010 CY - Bruges, Belgium DA - 2010-06-06 PY - 2010 AN - OPUS4-21408 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Schröder, Volkmar A1 - Krause, Heike T1 - Study of the Explosive Decomposition of Tetrafluoroethylene in a Partially Heated Pipe T2 - 13th International Symposium on Loss Prevention 2010 CY - Bruges, Belgium DA - 2010-06-07 PY - 2010 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. AN - OPUS4-21409 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Poli, Marco A1 - Blanchard, Robert A1 - Grätz, Rainer T1 - Effect of ignition position on the run-up distance to DDT for hydrogen-air explosions T2 - 13th International Symposium on Loss Prevention 2010 CY - Bruges, Belgium DA - 2010-06-07 PY - 2010 AN - OPUS4-21410 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Steinborn, Gabriele A1 - Kuchenbecker, Petra A1 - Scheler, S. T1 - Particle size determination at different concentrated Al2O3 and SiO2 nanopowder suspensions with the ultrasonic spectrometer DT 1200 T2 - Partec, WCPT6 2010 CY - Nuremberg, Germany DA - 2010-04-26 PY - 2010 AN - OPUS4-21412 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gemeinert, Marion A1 - Kuchenbecker, Petra A1 - Rabe, Torsten T1 - Round Robin Study of Particle Size Measurement by Laser Diffraction Method T2 - Partec 2010 CY - Nuremberg, Germany DA - 2010-04-26 PY - 2010 AN - OPUS4-21413 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ried, Peter A1 - Gaber, Martin A1 - Kluge, Martin A1 - Müller, Ralf A1 - Holtappels, Kai A1 - Eliezer, D. T1 - H2-permeability and burst pressure of glass capillaries T2 - 10. ESG Konferenz und 84. Jährliches Meeting der DGG CY - Magdeburg, Germany DA - 2010-05-30 PY - 2010 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. AN - OPUS4-21414 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Marotzke, Christian T1 - Mechanische Eigenschaften des Faser/Matrix Interfaces in Verbundwerkstoffen T2 - ILA 2010-Berlin Airshow, Konferenz: Composites in der Luft- und Raumfahrt CY - Berlin, Germany DA - 2010-06-08 PY - 2010 AN - OPUS4-21415 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pretsch, Thorsten T1 - Review on the functional determinants and durability of shape memory polymers N2 - Shape memory polymers (SMP) belong to the class of stimuli-responsive materials and have generated significant research interest. Their capability to retain an imposed, temporary shape and to recover the initial, permanent shape upon exposure to an external stimulus depends on the "functional determinants", which in simplistic terms, can be divided into structural/morphological and processing/environmental factors. The primary aim of the first part of this review is to reflect the knowledge about these fundamental relationships. In a next step, recent advances in shape memory polymer composites are summarized. In contrast to earlier reviews, studies on the impairment of shape memory properties through various factors, such as aging, compression and hibernation, lubricants, UV light and thermo-mechanical cycling, are extensively reviewed. Apart from summarizing the state-of-the-art in SMP research, recent progress is commented. KW - Shape memory polymer KW - Active polymer KW - Shape memory polymer composite KW - Shape memory properties KW - Functionality KW - Degradation KW - Aging KW - Functional determinants KW - Thermo-mechanical testing KW - Durability PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-217390 UR - http://www.mdpi.com/2073-4360/2/3/120/pdf DO - https://doi.org/10.3390/polym2030120 SN - 2073-4360 VL - 2 IS - 3 SP - 120 EP - 158 PB - MDPI CY - Basel AN - OPUS4-21739 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Witt, Jens A1 - Steffen, Milan A1 - Schukar, Marcus A1 - Krebber, Katerina T1 - Investigation of sensing properties of microstructured polymer optical fibres N2 - We investigated sensing properties of single mode poly methyl methacrylate (PMMA) microstructured polymer optical fibres (MPOF) with mechanically imprinted long period gratings (LPG). After preparation of the MPOF end-faces the samples were elongated with silica fibres. These samples were used to measure the influence of strain to the LPG wavelength which showed the viscoelastic nature of PMMA. We also measured the influence of temperature and humidity. The results show that MPOF LPGs are well suited for strain sensing. One MPOF LPG was stitched to a textile. Using this textile we measured a simulated respiratory motion. T2 - Photonics Europe 2010: Nanophotonics and photonics materials CY - Brussels, Belgium DA - 2010-04-12 KW - Microstructured polymer optical fibre KW - Long period grating KW - Strain sensor KW - Humidity sensor KW - Temperature sensor KW - Respiratory sensor PY - 2010 SN - 978-0-8194-8206-8 DO - https://doi.org/10.1117/12.854656 SN - 0277-786X VL - 7714 IS - 7714-12 SP - 77140F-1 - 77140F-12 AN - OPUS4-21740 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scheid, Marc T1 - Aktuelle und geplante Arbeiten bei CEN TC 305 WG 1 und WG 3 bezüglich brennbarer Stäube und im SC 31M MT 80079-20-2 T2 - 57. Sitzung des Arbeitskreises "Brennbare Stäube" CY - Freiberg, Germany DA - 2010-06-23 PY - 2010 AN - OPUS4-21742 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scheid, Marc A1 - Krietsch, Arne T1 - Untersuchungen zur Eignung eines alternativen pyrotechnischen Zünders zur Bestimmung von sicherheitstechnischen Kenngrößen in 20-l-Kugel und 1-m³-Behälter T2 - 57. Sitzung des Arbeiskreises "Brennbare Stäube" CY - Freiberg, Germany DA - 2010-06-23 PY - 2010 AN - OPUS4-21743 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scheid, Marc T1 - Bestimmung sicherheitstechnischer Kenngrößen von Stäuben (STK) und Nutzen für die Praxis T2 - Seminar "Aktueller Staubexplosionsschutz" CY - Essen, Germany DA - 2010-06-22 PY - 2010 AN - OPUS4-21744 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scheid, Marc T1 - Papierstaub im Druck und in der Papierverarbeitung - Mögliche Explosionsgefahren und geeignete SChutzmaßnahmen T2 - Fachtagung "Brand- und Explosionsschutz in Druckereien und papierverarbeitenden Betrieben" CY - Mainz, Germany DA - 2010-01-20 PY - 2010 AN - OPUS4-21745 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Olbricht, Jürgen A1 - Neddemeyer, Torsten A1 - Hünert, Daniela A1 - Klingelhöffer, Hellmuth A1 - Kranzmann, Axel A1 - Skrotzki, Birgit T1 - Mechanical Properties of Superheater Materials after Ageing and Corrosion in CO2 rich Flue Gases T2 - 1st Int. Conference on Materials for Energy CY - Karlsruhe, Germany DA - 2010-07-04 PY - 2010 AN - OPUS4-21709 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tonhauser, C. A1 - Wilms, D. A1 - Wurm, F. A1 - Berger-Nicoletti, E. A1 - Maskos, Michael A1 - Löwe, H. A1 - Frey, H. T1 - Multihydroxyl-functional polystyrenes in continuous flow N2 - We describe the synthesis of end-functionalized polystyrenes by living anionic polymerization in a microstructured reactor via termination by acetal-protected functional epoxides. Initiation of styrene polymerization by alkyllithium takes place in a micromixing device with efficient heat and mass transfer properties. A newly developed continuous polymerization-termination sequence enabled quantitative functionalization of the living carbanions by nucleophilic displacement with different, specifically designed glycidyl ethers (ethoxy ethyl glycidyl ether (EEGE), 1,2-isopropylidene glyceryl glycidyl ether (IGG), and trans-2-phenyl-1,3-dioxane glycidyl ether (PDGE)). Upon acidic hydrolysis the end-capped polystyrenes release multiple hydroxyl groups (2-3) at the chain end. Temperature and flow rates have been varied to control molecular weights and to optimize the reaction conditions for maximum polymerization and termination efficiency. The polymers were analyzed in detail using NMR spectroscopy, size exclusion chromatography (SEC), and MALDI-ToF-MS. Molecular weights of the samples prepared ranged between 1800 and 9000 g/mol. For all of the novel termination agents full termination was confirmed by MALDI-ToF MS. The approach presented is applicable for a large variety of monomers that are polymerizable by carbanionic polymerization. PY - 2010 DO - https://doi.org/10.1021/ma902849r SN - 0024-9297 SN - 1520-5835 VL - 43 IS - 13 SP - 5582 EP - 5588 PB - American Chemical Society CY - Washington, DC AN - OPUS4-21710 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Girard-Lauriault, Pierre-Luc A1 - Retzko, Iris A1 - Swaraj, Sufal A1 - Matsubayashi, N. A1 - Gross, Thomas A1 - Mix, Renate A1 - Unger, Wolfgang T1 - Non-destructive sub-surface chemical characterization of air-exposed plasma polymers by energy-resolved XPS KW - Plasma polymers KW - Synchrotron XPS KW - Depth profiling KW - Derivatisation PY - 2010 DO - https://doi.org/10.1002/ppap.200900130 SN - 1612-8850 SN - 1612-8869 VL - 7 IS - 6 SP - 474 EP - 481 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-21711 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Baytekin, H. Tarik A1 - Wirth, Thomas A1 - Gross, Thomas A1 - Sahre, Mario A1 - Unger, Wolfgang A1 - Theisen, J. A1 - Schmidt, M. T1 - Surface analytical characterization of micro-fluidic devices hot embossed in polymer wafers: Surface chemistry and wettability N2 - Recently, time-of-flight secondary ion mass spectrometry (ToF-SIMS) and X-ray photoelectron spectroscopy (XPS) instrumentation has been used to address areas of interest within micro-fluidic devices providing full access to the surface chemistry established at the bottom of micro-channels therein. After careful calibration, information on surface chemistry as obtained by ToF-SIMS or XPS can be interpreted in terms of wettability expressed as contact angles which are then characteristic for the inner walls of micro-channels. Standard contact angle measurement is not applicable in micro-channels. The approach has been demonstrated to be successful with two different micro-fluidic devices hot embossed into high-end quality poly(methyl methacrylate) (PMMA) or Polycarbonate wafers. A pre-selected surface chemistry at micro-channel walls can be established by plasma technologies but ageing and rinsing effects have to be under control. A combination of ToF-SIMS, XPS and contact angle measurement techniques has been demonstrated to provide the required information. Finally, it is shown by ToF-SIMS and XPS analysis that in the production of micro-fluidic parts during practical processing using hot embossing technologies, material originating from cover foils will reside on the polymer wafer's surface. Moreover, residues of releasing agents as silicone oil used during processing can be detected by ToF-SIMS. Both cover foil residues and silicones are issues of trouble shooting in micro-fluidics because they will change contact angles efficiently. KW - Micro-fluidic device KW - PMMA KW - Polycarbonate KW - Plasma treatment KW - Wettability KW - ToF-SIMS KW - XPS PY - 2010 DO - https://doi.org/10.1002/sia.3149 SN - 0142-2421 SN - 1096-9918 VL - 42 IS - 8 SP - 1417 EP - 1431 PB - Wiley CY - Chichester AN - OPUS4-21712 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bäßler, Ralph A1 - Weidauer, Kathleen A1 - Weltschev, Margit T1 - Duplex Steel S 32304 - A Low Cost and Corrosion-Resistant Alternative to Molybdenum Containing Austenite T2 - EUROCORR 2010 CY - Moscow, Russia DA - 2010-09-13 PY - 2010 AN - OPUS4-21713 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meyer-Plath, Asmus A1 - Oleszak, Franz A1 - Maneck, Heinz-Eberhard A1 - Mach, Reinhard T1 - Removal of metal impurities by plasma-thermal gas-phase purification of carbon nanotubes T2 - Carbon 2010 - The Annual World Conference on Carbon CY - Clemson, SC, USA DA - 2010-07-11 PY - 2010 AN - OPUS4-21714 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Korzen, Manfred A1 - Rodrigues, J. P. C. A1 - Correia, A. M. T1 - Composite Columns Made of Partially Encased Steel Sections Subjectd to Fire T2 - 6th International Conference Structures in Fire CY - East Lansing, MI, USA DA - 2010-06-02 PY - 2010 AN - OPUS4-21715 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lang, Cindy A1 - Hübert, Thomas A1 - Banach, Ulrich T1 - Sensoren zum Monitoring pflanzlicher Frischeprodukte T2 - Sensor+Test 2010 CY - Nuremberg, Germany DA - 2010-05-18 PY - 2010 AN - OPUS4-21717 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Banach, Ulrich A1 - Tiebe, Carlo A1 - Hübert, Thomas T1 - Qualitätskontrolle von Gewürzmischungen mit Elektronischer Nase und Ionenmobilitätsspektrometer T2 - Sensoer+Test 2010 CY - Nuremberg, Germany DA - 2010-05-18 PY - 2010 AN - OPUS4-21718 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Urs T1 - Die Mikro-Röntgenfluoreszenzanalyse (MRFA) als ergänzende Methode bei der Analyse von Schädigungen an zementgebundenen Baustoffen T2 - 17. Anwenderworkshop "Röntgenfluoreszenz- und Funkenemissionsspektrometrie" 2010 CY - Dortmund, Germany DA - 2010-03-08 PY - 2010 AN - OPUS4-21719 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Olbricht, Jürgen A1 - Neddemeyer, Torsten A1 - Hünert, Daniela A1 - Klingelhöffer, Hellmuth A1 - Kranzmann, Axel A1 - Skrotzki, Birgit T1 - Mechanical properties of superheater materials after ageing and corrosion in CO2 rich flue gases T2 - First international conference on materials for energy CY - Karlsruhe, Germany DA - 2010-07-04 KW - Power generation KW - Superheater materials KW - Hot corrosion KW - Carburisation PY - 2010 SN - 978-3-89746-117-8 IS - Extended abstracts - Book A SP - 251 EP - 253 AN - OPUS4-21727 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krahl, Thoralf A1 - Jäger, Christian A1 - Gildenhaar, Renate A1 - Berger, Georg T1 - 31P-MAS-NMR - eine Methode zur Analyse und Entwicklung komplexer Biokeramiken auf der Basis von Ca 10(K,Na)(PO 4)7 T2 - "Festkörper-NMR-Methoden und Anwendungen in der Materialforschung", Seminar der Universität Tübingen CY - Bad Hindelang, Germany DA - 2010-07-18 PY - 2010 AN - OPUS4-21700 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jäger, Christian A1 - Krahl, Thoralf A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Becker, Anika T1 - 31P MAS NMR - a Method for Analysis ans Development of Complex Bioceramics based on Ca 10(K,Na)(PO 4)7 T2 - 52nd Anual Rocky Mountain Conference on Analytical Chemistry CY - Snowmass, CO, USA DA - 2010-08-01 PY - 2010 AN - OPUS4-21702 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Laible, Patrick A1 - Heckel, Thomas T1 - Quantitative Risstiefenbestimmung an Eisenbahnschienen mit Ultraschall T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21756 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gohlke, Dirk A1 - Matthies, Klaus T1 - Hochauflösende Ultraschallprüfung zur Ermittlung mikroskopischer Einschlüsse in hochbelasteten Bauteilen T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21757 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias T1 - Entwicklung und Kombination optischer und thermografischer zerstörungsfreier Messverfahren zur Bewertung von Bauteiloberflächen und -grenzflächen T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21758 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pelkner, Matthias A1 - Blome, Mark A1 - Reimund, Verena A1 - Thomas, Hans-Martin T1 - 3D-GMR-Messungen an Referenzbauteilen und Rekonstruktion von Rissgeometrien T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21759 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlichting, Joachim A1 - Kervalishvili, Guram N. A1 - Maierhofer, Christiane A1 - Kreutzbruck, Marc T1 - Geometrische Charakterisierung von Fehlstellen mittels lokal angeregter aktiver Thermografie T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21760 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Karkhin, Victor A1 - Pittner, Andreas A1 - Schwenk, Christopher A1 - Rethmeier, Michael T1 - Heat Source Models in Simulation of Heat Flow in Fusion Welding T2 - The Fifth International Conference "Mathematical Modelling and Information, Technologies in Welding and Related Processes", vil. Katsively CY - Crimea, Ukraine DA - 2010-05-24 PY - 2010 AN - OPUS4-21761 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Brauser, Stephan A1 - Pepke, Lutz-Alexander A1 - Weber, Gert A1 - Rethmeier, Michael T1 - Influence of production-related gaps on strength properties and deformation behaviour of spot welded TRIP Steel HCT690T T2 - 63rd Annual Assembly & International Conference of the International Institute of Welding, SC AUTO CY - Istanbul, Turkey DA - 2010-07-13 PY - 2010 AN - OPUS4-21762 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Qiao, Linan A1 - Ballheimer, Viktor A1 - Wieser, Günter A1 - Zencker, Uwe A1 - Quercetti, Thomas T1 - Numerische Simulation von Fallversuchen mit behälterstoßdämpfern bei unterschiedlichen Fallwinkeln mittels ABAQUS/Explicit T2 - Deutsche SIMULIA-Konferenz 2010 CY - Heidelberg, Germany DA - 2010-09-20 PY - 2010 AN - OPUS4-21763 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Frübing, P. A1 - Wang, F. A1 - Gerhard, R. A1 - Wegener, M. A1 - Jaunich, Matthias A1 - Stark, Wolfgang T1 - Dielectric and mechanical losses in ferroelectric Poly(vinylidene Fluoride) (PVDF) and its copolymer with hexafluoropropylene (P(VDF-HFP)) T2 - 10. IEEE Conference on Solid Dielectrics CY - Potsdam, Germany DA - 2010-07-04 PY - 2010 AN - OPUS4-21764 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krietsch, Arne A1 - Scheid, Marc T1 - Experimentelle Untersuchung zum Einfluss eines neuen pyrotechnischen Zünders auf die ermittelten STK T2 - Interschutz - Internationale Leitmesse für Rettung, Brand- und Katastrophenschutz und Sicherheit CY - Leipzig, Germany DA - 2010-06-07 PY - 2010 AN - OPUS4-21746 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scheid, Marc A1 - Krietsch, Arne A1 - Lasry, M. A1 - Suter, G. A1 - Teske, H.-J. A1 - Stahmer, K. W. A1 - Arnold, A. A1 - Nemcak, O. A1 - Cesana, C. A1 - Siwek, R. T1 - Validation of alternative igniters for the determination explosion characteristics of dust clouds in 20-l-sphere and 1-m³-vessel T2 - 13th International Symposium on Loss Prevention and Safety Promotion in the Process Industries CY - Bruges, Belgium DA - 2010-06-06 PY - 2010 AN - OPUS4-21747 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Prinzipien der aktiven Thermografie im Bauwesen und Anwendung in der Denkmalpflege T2 - Seminar Thermografie am Bau, Deutsche Gesellschaft für Zerstörungsfreie Prüfung CY - Berlin, Germany DA - 2010-05-04 PY - 2010 AN - OPUS4-21749 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Untersuchung von Schädigungsprozessen an Bauteiloberflächen und -grenzflächen mit Hilfe optischer und thermografischer zerstörungsfreier Prüfverfahren, Ergebnisse eines Projektes der Forschungsinitiative Zukunft Bau T2 - Seminar Thermografie am Bau, Deutsche Gesellschaft für Zerstörungsfreie Prüfung CY - Berlin, Germany DA - 2010-05-04 PY - 2010 AN - OPUS4-21750 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kitze, Jessica A1 - Brackrock, Daniel A1 - Gaal, Mate A1 - Prager, Jens A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc A1 - Paczolay, G. T1 - SAFT und TOFD - ein Vergleich im Analyseverhalten von Reflektoren T2 - 15. ITG-/GMA-Fachtagung "Sensoren und Messsysteme 2010" CY - Nuremberg, Germany DA - 2010-05-18 PY - 2010 AN - OPUS4-21752 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlichting, Joachim A1 - Kervalishvili, Guram N. A1 - Maierhofer, Christiane A1 - Kreutzbruck, Marc T1 - Geometrische Charakterisierung von Fehlstellen lokal angeregter aktiver Thermografie T2 - 15. ITG-/GMA-Fachtagung "Sensoren und Messsysteme 2010" CY - Nuremberg, Germany DA - 2010-05-18 PY - 2010 AN - OPUS4-21753 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kreutzbruck, Marc T1 - Ultraschallverfahren - Bewährte Lösungen und neue Technologien in Forschung und Produktion T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21754 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Boehm, Rainer A1 - Völz, Uwe T1 - Digitale Signalverarbeitung von Ultraschallmessdaten T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21755 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaul, Holger A1 - Brauser, Stephan A1 - Weber, Gert A1 - Rethmeier, Michael T1 - METHODS TO OBTAIN WELD DISCONTINUITIES IN SPOT WELDED JOINTS MADE OF ADVANCED HIGH STRENGTH STEELS T2 - 63rd Annual Assembly & International Conference of the International Institute of Welding, SC-Auto CY - Istanbul, Turkey DA - 2010-07-13 PY - 2010 AN - OPUS4-21766 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ziegert, C. A1 - Müller, Urs A1 - Röhlen, U. T1 - Standardization of earth blocks in Germany T2 - 8th International Masonry Conference CY - Dresden, Germany DA - 2010-07-04 PY - 2010 AN - OPUS4-21767 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Urs A1 - Ziegert, C. A1 - Röhlen, U. A1 - Schröder, H. T1 - Standardization of a sustainable and eco-efficient building material: Earth - A German perspective T2 - Central Europe towards Sustainable Building 2010 (CESB10) CY - Prague, Czech Republic DA - 2010-06-30 PY - 2010 AN - OPUS4-21768 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Urs T1 - Die Mikro-Röntgenfluoreszenzanalyse (MRFA) als ergänzende Methode bei der Analyse von Schädigungen an zementgebundenen Baustoffe T2 - Werkstofftechnisches Kolloquium 2010 (Kompetenzbereich Werkstoffanalytik), TU Darmstadt CY - Darmstadt, Germany DA - 2010-06-17 PY - 2010 AN - OPUS4-21769 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Menrad, Andreas A1 - Goedecke, Thomas T1 - Zwischenstad der Dissertation: Kunststoffverpackungen- Beschreibung des Versagensverhaltens mittels geeigneter und reproduzierbarer Werkstoffkennwerte T2 - Erfahrungsaustausch Verpackungen, BAM CY - Berlin, Germany DA - 2010-07-07 PY - 2010 AN - OPUS4-21770 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai A1 - Schröder, Volkmar A1 - Plehn, W. A1 - Hoffmann, G. T1 - HFO1234yf - Safety when exposed to ignition sources T2 - SAE 2010 Automotive Refrigerant and System Efficiency Symposium CY - Scottsdale, AZ, USA DA - 2010-07-13 PY - 2010 AN - OPUS4-21771 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krug, Sonja A1 - Hahn, Oliver A1 - Lang, A. A1 - Zimmer, J. A1 - Homolka, M. T1 - Folgen der historischen Schädlingsbekämpfung in Archiven und Museen, Risikoabschätzung - Gefahr für Mensch und Umwelt T2 - Jahrestagung Archäometrie und Denkmalpflege 2010; Deutsches Bergbaumuseum CY - Bochum, Germany DA - 2010-09-15 PY - 2010 AN - OPUS4-21772 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rabin, Ira A1 - Hahn, Oliver A1 - Wolff, Timo A1 - Kindzorra, Emanuel A1 - Schütz, Roman A1 - Schade, U. A1 - Lasch, P. A1 - Emmerling, Franziska A1 - Weinberg, G. T1 - Provenienz und Herstellung der Schriftrollen vom Toten Meer: der Beitrag der Naturwissenschaften T2 - Jahrestagung Archäometrie und Denkmalpflege 2010 CY - Bochum, Germany DA - 2010-09-15 PY - 2010 AN - OPUS4-21774 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tagle, R. A1 - Hahn, Oliver A1 - Haschke, M. A1 - Waldschläger, U. T1 - Elementverteilungen in "High Speed" Ortsaufgelöste Röntgenspektroskopie für die Untersuchung kunsthistorischer Objekte T2 - Jahrestagung Archäometrie und Denkmalpflege 2010 CY - Bochum, Germany DA - 2010-09-15 PY - 2010 AN - OPUS4-21775 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ziemann, M. A1 - Arnold, B. A1 - Burger, H. A1 - Drott, U. A1 - Hahn, Oliver A1 - Kaun, S. A1 - Laue, S. A1 - Noll-Minor, M. A1 - Raue, J. A1 - Schlütter, F. T1 - Pigmentveränderungen - Verblassen von Mennige T2 - Jahrestagung Archäometrie und Denkmalpflege 2010 CY - Bochum, Germany DA - 2010-09-15 PY - 2010 AN - OPUS4-21776 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Arnold, B. A1 - Burger, H. A1 - Drott, U. A1 - Hahn, Oliver A1 - Kaun, S. A1 - Laue, S. A1 - Noll-Minor, M. A1 - Raue, J. A1 - Schlütter, F. A1 - Ziemann, M. T1 - Pigmentveränderungen - Verschwärzen von Bleizinngelb T2 - Jahrestagung Archäometrie und Denkmalpflege 2010 CY - Bochum, Germany DA - 2010-09-15 PY - 2010 AN - OPUS4-21777 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Torge, Manfred A1 - Krug, Sonja A1 - Bücker, Michael A1 - Feldmann, Ines A1 - Scharf, Holger A1 - Witthuhn, Heike A1 - Sander, C. A1 - Fraenkler-Ballhorn, K. T1 - Mercury Emissions from Historical Tin Amalgam Mirrors T2 - ICOM Glass and Ceramic Conservation, iterim meeting CY - Corning, NY, USA DA - 2010-10-03 PY - 2010 AN - OPUS4-21778 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lühl, Lars A1 - Hesse, B. A1 - Mantouvalou, I. A1 - Zizak, I. A1 - Hahn, Oliver A1 - Kanngießer, B. T1 - 3D Mikro-Röntgennahkantenabsorptionsspektroskopie (Xanes X-Ray absorption near edge spectroscopy) T2 - Jahrestagung Archäometrie und Denkmalpflege 2010 CY - Bochum, Germany DA - 2010-09-15 PY - 2010 AN - OPUS4-21779 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mix, Renate A1 - Friedrich, Jörg F. A1 - Wettmarshausen, Sascha T1 - New concept for metal-polyolefin composite interfaces T2 - MACRO 2010 Polymer Science in the Service of Society CY - Glasgow, Scotland DA - 2010-07-11 PY - 2010 AN - OPUS4-21780 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mix, Renate A1 - Falkenhagen, Jana A1 - Friedrich, Jörg F. T1 - Analytical characterization of plasma polymers and copolymers of acrylic acid T2 - MACRO 2010 Polymer Science in the Service of Society CY - Glasgow, Scotland DA - 2010-07-11 PY - 2010 AN - OPUS4-21781 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Binner, Richard A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Homberg, U. T1 - Ermittlung von Parametern zur Bewertung der Strukturstabilität von suffosiven Bodenmaterialien T2 - Kolloquium CY - Berlin, Germany DA - 2010-06-29 PY - 2010 AN - OPUS4-21782 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Perret, William T1 - Case study for welding simulation in the automotive industry T2 - IIW-Select Committee "Automotive and Road transport" (IIW-Doc. No. SC-Auto-37-10) - Annual Assembly 2010 Istanbul CY - Istanbul, Turkey DA - 2010-07-11 PY - 2010 AN - OPUS4-21783 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Matthias A1 - Bremser, Wolfram A1 - Köppen, Robert A1 - Nehls, Irene T1 - Novel reference materials for mycotoxin analysis T2 - Konferenz zum 50. Jahrestag des JRC's IRMM CY - Geel, Belgium DA - 2010-11-23 PY - 2010 AN - OPUS4-21784 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Auersch, Lutz T1 - Buildings on pile groups and railway induced vibration - finite-element boundary-element, approximating and prediction methods T2 - ICCCBE, Int. Conf. on Computing in Civil and Building Engineering CY - Nottingham, England DA - 2010-06-29 PY - 2010 AN - OPUS4-21785 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mull, Birte T1 - Untersuchung zu Emissionen von schwerflüchtigen organischen Verbindungen aus Materialien bei Luftwechseln nahe Null T2 - Workshop: Emissionsarme Museumsvitrinen CY - Frankfurt am Main, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22178 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stattaus, Kim A1 - Kurth, Lutz A1 - Dutschke, Andreas A1 - Kästorf, Nadine A1 - Lohrer, Christian T1 - Impacts of various conditionings on performance parameters of category 4 fireworks shells T2 - 12th International symposium on fireworks CY - Porto/Gaia, Portugal DA - 2010-10-11 KW - Pre-normative research KW - Standardisation KW - Height measurements PY - 2010 SN - 978-0-9867279-0-0 SN - 978-0-9867279-1-7 SP - 290 EP - 300 AN - OPUS4-22179 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lohrer, Christian T1 - Standardisation of fireworks - quo vadis? T2 - 12th International symposium on fireworks CY - Porto/Gaia, Portugal DA - 2010-10-11 KW - CEN TC 212 KW - Fireworks and theatrical pyrotechnic articles PY - 2010 SN - 978-0-9867279-0-0 SN - 978-0-9867279-1-7 SP - 182 EP - 188 AN - OPUS4-22180 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lutze, Romy A1 - Dutschke, Andreas A1 - Lohrer, Christian A1 - Kurth, Lutz T1 - Emission studies of the theatrical pyrotechnic articles under defined boundary conditions T2 - 12th International symposium on fireworks CY - Porto/Gaia, Portugal DA - 2010-10-11 KW - Aerosols KW - Combustion KW - FMPS KW - FT-IR PY - 2010 SN - 978-0-9867279-0-0 SN - 978-0-9867279-1-7 SP - 190 EP - 206 AN - OPUS4-22181 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Zäh, M. A1 - Schönlein, A. A1 - Reichert, T. T1 - Polypropylene life time estimation by developing dose response functions with respect to irradiation and temperature - ViPQuali project T2 - 8th International symposium on weatherability (8th ISW) CY - Tokyo, Japan DA - 2010-10-14 KW - Life time estimation KW - Weathering KW - Polypropylene KW - Spectral sensitivity KW - Temperature PY - 2010 SN - 1346-0633 VL - 22 SP - 58 EP - 63 PB - Uni Publishers Co., Ltd. AN - OPUS4-22182 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nohr, Michael T1 - Vorgehen zur Bestimmung der Emission flüchtiger organischer Verbindungen aus Materialien zum Vitrinenbau T2 - Workshop: Emissionsarme Museumsvitrinen CY - Frankfurt am Main, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22185 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scholz, A. A1 - Nazmy, M. A1 - Fedelich, Bernard A1 - Tinga, T. A1 - Huls, R. T1 - Modelling of microstructural and mechanical property changes in gas turbine alloys T2 - 9th Liege Conference on Materials for Advanced Power Engineering CY - Liège, Belgium DA - 2010-09-27 PY - 2010 AN - OPUS4-22226 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schönhals, Andreas A1 - Purohit, Purv T1 - Structure-Property Relationships of Polyolefine based Nanocomposites with Layered Double Hydroxides - Interplay between Matrix and Interfacial Effects T2 - 3. Jahresmeeting VAMA TWA-33 (Poymeric Nanocomposites) CY - Istanbul, Turkey DA - 2010-10-19 PY - 2010 AN - OPUS4-22228 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Quiroz Penaranda, Vanessa A1 - Gebhardt, Moritz Oliver A1 - Gook, Sergej A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Hot cracking in high power laser beam welding of thick high strength structural steels under restraint conditions T2 - ICALEO 2010 - 29th International Congress on Applications of Lasers & Electro-Optics CY - Anaheim, CA, USA DA - 2010-09-26 KW - High power laser beam welding KW - Solidification crack KW - Hot crack KW - Instrumented restrained cracking test PY - 2010 SN - 978-0-912035-61-1 VL - 103 IS - Pub #613 / Paper 509 SP - 225 EP - 232 AN - OPUS4-22229 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sokolowski-Tinten, K. A1 - Barty, A. A1 - Boutet, S. A1 - Shymanovich, U. A1 - Chapman, H. A1 - Bogan, M. A1 - Marchesini, S. A1 - Hau-Riege, S. A1 - Stojanovic, N. A1 - Bonse, Jörn A1 - Rosandi, Y. A1 - Urbassek, H. M. A1 - Tobey, R. A1 - Ehrke, H. A1 - Cavalleri, A. A1 - Düsterer, S. A1 - Redlin, H. A1 - Frank, M. A1 - Bajt, S. A1 - Schulz, J. A1 - Seibert, M. A1 - Hajdu, J. A1 - Treusch, R. A1 - Bostedt, C. A1 - Hoener, M. A1 - Möller, T. T1 - Short-pulse laser induced transient structure formation and ablation studied with time-resolved coherent XUV-scattering T2 - International high-power laser ablation conference CY - Santa Fe, USA DA - 2010-04-18 KW - Femtosecond laser ablation KW - Free electron lasers KW - Coherent scattering PY - 2010 SN - 978-0-7354-0828-9 N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings IS - 1278 SP - 373 EP - 379 PB - American Institute of Physics CY - Melville, NY, USA AN - OPUS4-22230 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Myshkin, N. A1 - Kovalev, Alexander A1 - Makhovskaya, Y. A1 - Torskaya, E. A1 - Goryacheva, I. T1 - Influence of adhesion induced contact areas on sliding friction N2 - Recent developments in micromechanics and nanotribology have made adhesion effects very important in the study of actual contact formation and sliding friction. The present work considers the experimental and simulation data on the formation of the adhesion contact and sliding friction for rough surfaces. The simulation of discrete contact was carried out using the AFM images of topography as a source of real surface geometry at micro/nanoscale. The proposed approach of contact modelling is not using the statistical parameters of roughness, but it provides the estimation of the additional adhesion induced contact areas and their influence on sliding friction. The friction law of Bowden and Tabor was used for validation of simulation and experimental data. Furthermore, the workhardening effect was taken into account in simulation of sliding friction, and this enabled to reach a more successful fit of experimental data. The obtained results of the computer simulations will provide a way of studying the movable contact or at least transition from static to dynamic friction at the micro/nanoscale level. KW - Rough surface KW - Real contact area KW - Adhesion KW - Elastic contact KW - Plastic contact PY - 2010 DO - https://doi.org/10.1179/175158310X12678019274363 SN - 1751-5831 VL - 4 IS - 3 SP - 130 EP - 135 PB - Maney CY - London AN - OPUS4-22231 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gook, Sergej A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Weld seam formation and mechanical properties of girth welds performed with laser-GMA-hybrid process on pipes of grade X65 T2 - ICALEO 2010 - 29th International Congress on Applications of Lasers & Electro-Optics CY - Anaheim, CA, USA DA - 2010-09-26 KW - High-power laser KW - Fiber laser KW - Pipeline KW - Hybrid welding KW - Girth welding PY - 2010 SN - 978-0-912035-61-1 VL - 103 IS - Pub #613 / Paper 202 SP - 62 EP - 69 AN - OPUS4-22232 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc A1 - Boehm, Rainer A1 - Kitze, Jessica A1 - Eggers, H. A1 - Böwe, M. T1 - Using UT-SAFT for analysis of stress corrosion cracking T2 - 8th International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurised Components CY - Berlin, Germany DA - 2010-09-29 PY - 2010 AN - OPUS4-22233 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kitze, Jessica A1 - Brackrock, Daniel A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc A1 - Prager, Jens A1 - Gaal, Mate T1 - SAFT and TOFD - A Comperative Study of Two Defect Sizing Techniques T2 - 8th International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurised Components CY - Berlin, Germany DA - 2010-09-29 PY - 2010 AN - OPUS4-22235 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Köppen, Robert A1 - Koch, Matthias A1 - Nehls, Irene T1 - Überwachung pflanzlicher Rohstoffe - Trichothecen-Analytik in Getreide und Getreideerzeugnissen PY - 2010 SN - 0012-0413 SN - 1869-2214 VL - 106 IS - DLR Spezial 2 SP - 66 EP - 72A PB - Wiss. Verl.-Ges. CY - Stuttgart AN - OPUS4-22206 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wäsche, Rolf A1 - Hartelt, Manfred A1 - Springborn, U. A1 - Bewilogua, K. A1 - Keunecke, M. T1 - Wear of carbon nitride coatings under oscillating sliding conditions N2 - An extended study on tribological properties of carbon nitride coatings under oscillating sliding conditions has been carried out. The coatings were prepared by reactive magnetron sputtering with graphite target using nitrogen as reactive gas in an argon/nitrogen atmosphere during the deposition process to deposit carbon nitride, CNx. Coating thickness was about 2 µm. A 200–300 nm thick Ti interlayer was used to enhance adhesion. The nitrogen flow during the deposition was varied to control the amount of nitrogen in the coating. Maximum amount of N-content was about 28 at%, achieved at a maximum N2 flow rate. Other deposition parameters were target to substrate distance, substrate temperature during deposition and bias voltage. The results show a large variation of hardness depending mainly on the nitrogen content and bias voltage. Higher bias voltage produced harder coatings as did lower nitrogen content. The tribological properties were tested unlubricated and lubricated by paraffin oil under gross slip fretting conditions at room temperature against alumina as counter material. Most coatings, but not all, showed a more or less pronounced dependence of wear on relative humidity with wear rates from 10-5 to 10-6 mm3/Nm. The best coatings with regard to a low wear rate and the least dependence upon relative humidity were carbon nitride coatings deposited at elevated substrate temperatures up to 350 °C. The wear resistance of these coatings was increased under the most severe conditions by about one order of magnitude. The results are discussed on the basis of a transfer layer formation. The results show clearly that wear is not significantly correlated to the coating hardness which itself is strongly dependant on the nitrogen content. However, under lubricated conditions with paraffin oil, wear rates were generally very low with wear coefficients at about 10-8 mm3/Nm. KW - Carbon nitride KW - Wear KW - Fretting KW - Dry sliding KW - Paraffin oil PY - 2010 DO - https://doi.org/10.1016/j.wear.2010.08.010 SN - 0043-1648 VL - 269 IS - 11-12 SP - 816 EP - 825 PB - Elsevier CY - Amsterdam AN - OPUS4-22208 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wienecke, Bernd-Uwe T1 - Ansteckungsgefährliche Stoffe. welche Besonderheiten gibt es T2 - Fachveranstaltung Gefahrstoff - Gefahrgutverpackungen in der Praxis, BAM CY - Berlin, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22209 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tscheuschner, Frank A1 - Stahl, Michael T1 - Hilfsmittel - Datenbank GEFAHRGUT T2 - Fachveranstaltung Gefahrstoff - Gefahrgutverpackungen in der Praxis, BAM CY - Berlin, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22210 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scholz, Christian A1 - Spaltmann, Dirk A1 - Woydt, Mathias T1 - Wälzbeständigkeit von Hochleistungsdünnschichten und hochzähen Stahlsubstraten bis 3.8 GPa Hertz'scher Kontaktpressung T2 - 51. Tribologie-Fachtagung - Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen CY - Göttingen, Deutschland DA - 2010-09-27 KW - Hochzähe Stähle KW - DLC KW - ZrCN KW - Dünnschichten KW - Extrembeanspruchung PY - 2010 SN - 978-3-00-032180-1 VL - I SP - 17/1 EP - 17/11 CY - Aachen AN - OPUS4-22211 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wienecke, Bernd-Uwe T1 - Verpackungen (einschließlich Großpakmittel (IBC) und Großverpackungen) T2 - Fachveranstaltung Gefahrstoff - Gefahrgutverpackungen in der Praxis, BAM CY - Berlin, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22212 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Hillemeier, B. A1 - Walther, A. T1 - Condition assessment of a 45-year-old prestressed concrete bridge using NDT and verification of the results T2 - NDE/NDT for highways and bridges - Structural materials technology (SMT) CY - New York, USA DA - 2010-08-16 KW - Zerstörungsfreie Prüfung im Bauwesen KW - ZfP im Bauwesen KW - Remananzmagnetismus KW - Spanndrahtbrüche KW - Bildgebende Darstellung KW - Automatisierung PY - 2010 SN - 978-1-57117-211-2 SP - 280 EP - 287 CY - Columbus, OH, USA AN - OPUS4-22213 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Dangerous goods Packaging T2 - 6th International Packaging Congress, CY - Istanbul, Turkey DA - 2010-09-16 PY - 2010 AN - OPUS4-22214 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Musolff, André A1 - Droste, Bernhard A1 - Quercetti, Thomas A1 - Müller, Karsten T1 - Durchführung experimenteller Fallprüfungen im Rahmen der mechanischen Bauartprüfung von Transportbehältern für radioaktive Stoffe T2 - Jahrestagung Kerntechnik CY - Berlin, Germany DA - 2010-05-04 PY - 2010 AN - OPUS4-22215 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lang, Cindy A1 - Hübert, Thomas ED - Kupfer, K. ED - Wagner, N. ED - Wagner, R. ED - Bonitz, F. ED - Müller, B. ED - Hübner, C. T1 - "Künstliche Früchte" - Online-Monitoring des Feuchtigkeitsverlustes bei pflanzlichen Frischeprodukten T2 - Aquametry 2010 - 1st European conference on moisture measurement CY - Weimar, Deutschland DA - 2010-10-05 KW - Ausgleichsfeuchte KW - Wasseraktivität KW - Transpiration KW - Nachernteverhalten PY - 2010 SP - 333 EP - 339 AN - OPUS4-22167 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Jarvis, B. A1 - Wilrich, Cordula A1 - Wilrich, P.-Th. T1 - Reconsideration of the derivation of most probable numbers, their standard deviations, confidence bounds and rarity values N2 - Aims: The purpose of this work was to derive a simple Excel spreadsheet and a set of standard tables of most probable number (MPN) values that can be applied by users of International Standard Methods to obtain the same output values for MPN, SD of the MPN, 95% confidence limits and test validity. With respect to the latter, it is considered that the Blodgett concept of 'rarity' is more valuable than the frequently used approach of improbability (vide de Man). Methods and Results: The paper describes the statistical procedures used in the work and the reasons for introducing a new set of conceptual and practical approaches to the determination of MPNs and their parameters. Examples of MPNs derived using these procedures are provided. The Excel spreadsheet can be downloaded from http://www.wiwiss.fu-berlin.de/institute/iso/mitarbeiter/wilrich/index.html. Conclusions: The application of the revised approach to the determination of MPN parameters permits those who wish to use tabulated values, and those who require access to a simple spreadsheet to determine values for nonstandard test protocols, to obtain the same output values for any specific set of multiple test results. The concept of 'rarity' is a more easily understood parameter to describe test result combinations that are not statistically valid. Provision of the SD of the log MPN value permits derivation of uncertainty parameters that have not previously been possible. Significance and Impact of the Study: A consistent approach for the derivation of MPNs and their parameters is essential for coherence between International Standard Methods. It is intended that future microbiology standard methods will be based on the procedures described in this paper. KW - Confidence bounds KW - Microbiological analyses KW - Most probable number KW - MPN KW - Rarity value PY - 2010 DO - https://doi.org/10.1111/j.1365-2672.2010.04792.x SN - 1364-5072 VL - 109 IS - 5 SP - 1660 EP - 1667 PB - Wiley-Blackwell CY - Malden, Mass., USA AN - OPUS4-22168 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Niebergall, Ute T1 - Comparsion of the stress crack resistance of polyethylene grades with the test performance behaviour of packagings for the transport of dangerous goods T2 - EUROCORR 2010 - The European Corrosion Congresss CY - Moscow, Russia DA - 2010-09-13 PY - 2010 AN - OPUS4-22169 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jochems, Frank A1 - Werner, Jan T1 - BK-Schüttgut-Container Beförderung von infizieten Tierkörpern in loser Schüttung T2 - Symposium infektiöse Materialien, BAM Berlin (Veranstalter: RKI, BAM, Storck-Verlag Hamburg CY - Berlin, Germany DA - 2010-10-28 PY - 2010 AN - OPUS4-22170 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Godara, A. A1 - Gorbatikh, L. A1 - Kalinka, Gerhard A1 - Warrier, A. A1 - Rochez, O. A1 - Mezzo, L. A1 - Luizi, F. A1 - van Vuure, A.W. A1 - Lomov, S.V. A1 - Verpoest, I. T1 - Interfacial shear strength of a glass fiber/epoxy bonding in composites modified with carbon nanotubes N2 - In recent years, carbon nanotubes (CNTs) grown on fibers have attracted a lot of interest as an additional reinforcing component in conventional fiber-reinforced composites to improve the properties of the fiber/matrix interface. Due to harsh growth conditions, the CNT-grafted fibers often exhibit degraded tensile properties. In the current study we explore an alternative approach to deliver CNTs to the fiber surface by dispersing CNTs in the fiber sizing formulation. This route takes advantage of the developed techniques for CNT dispersion in resins and introduces no damage to the fibers. We focus on unidirectional glass fiber/epoxy macro-composites where CNTs are introduced in three ways: (1) in the fiber sizing, (2) in the matrix and (3) in the fiber sizing and matrix simultaneously. Interfacial shear strength (IFSS) is investigated using single-fiber push-out microindentation. The results of the test reveal an increase of IFSS in all three cases. The maximum gain (over 90%) is achieved in the composite where CNTs are introduced solely in the fiber sizing. KW - A. Carbon nanotubes KW - A. Hybrid composites KW - A. Polymer-matrix composites (PMCs) KW - B. Interfacial strength PY - 2010 DO - https://doi.org/10.1016/j.compscitech.2010.04.010 SN - 0266-3538 VL - 70 IS - 9 SP - 1346 EP - 1352 PB - Elsevier CY - Barking AN - OPUS4-22171 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Torge, Manfred A1 - Krug, Sonja A1 - Bücker, Michael A1 - Feldmann, Ines A1 - Scharf, Holger A1 - Witthuhn, Heike A1 - Sander, C. A1 - Fraenkler-Balhorn, K. ED - Roemich, H. T1 - Mercury emissions from historical tin amalgam mirrors T2 - Interim Meeting of the ICOM-CC Working Group - Glass & Ceramics Conservation CY - Corning, New York, USA DA - 2010-10-03 KW - Mirrors KW - Mercury KW - Tin amalgam KW - Deterioration PY - 2010 SN - 978-0-87290-182-7 SP - 156 EP - 163 AN - OPUS4-22175 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Resch-Genger, Ute A1 - Grabolle, Markus A1 - Nitschke, R. A1 - Nann, T. ED - Demchenko, A.P. T1 - Nanocrystals and nanoparticles versus molecular fluorescent labels as reporters for bioanalysis and the life sciences: a critical comparison N2 - At the core of photoluminescence techniques are suitable fluorescent labels and reporters, the spectroscopic properties of which control the limit of detection, the dynamic range, and the potential for multiplexing. Many applications including recent developments in intracellular labeling rely on well established molecular chromophores such as small organic dyes or fluorescent proteins. However, one of the most exciting – but also controversial – advances in reporter technology, the emerging development and application of luminescent nanoparticles with unique optical properties, yet complicated surface chemistry paves new roads for fluorescence imaging and sensing as well as for in vitro and in vivo labeling. Here, we compare and evaluate the differences in physico-chemical properties of common fluorophores, focusing on traditional organic dyes and luminescent nanocrystals with size-dependent features. The ultimate goal is to provide a better understanding of the advantages and limitations of both classes of chromophores, facilitate fluorophore choice for users of fluorescence techniques, and address future challenges in the rational design and manipulation of nanoparticulate labels and probes. KW - Amplification KW - Fluorescent reporter KW - Fluorophore KW - FRET KW - In vitro KW - In vivo KW - Labeling KW - Lanthanide chelate KW - Multiplexing KW - Nanoparticle KW - Quantum dot KW - Transition metal complex PY - 2010 SN - 978-3-642-04699-5 DO - https://doi.org/10.1007/978-3-642-04701-5_1 N1 - Serientitel: Springer Series on Fluorescence – Series title: Springer Series on Fluorescence VL - 9 IS - 1 SP - 3 EP - 40 PB - Springer AN - OPUS4-22186 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neumann, Patrick P. A1 - Bartholmai, Matthias A1 - Schiller, J.H. A1 - Wiggerich, B. A1 - Manolov, Manol T1 - Micro-drone for the characterization and self-optimizing search of hazardous gaseous substance sources: A new approach to determine wind speed and direction N2 - BAM Federal Institute for Materials Research and Testing, in cooperation with the AirRobot GmbH & Co. KG company, has developed a flying remote-controlled measuring system. The system is capable of operating in a variety of scenarios of gas emissions, e.g. exhaust gas from chimneys, flue gas in a fire, gas emissions in the case of an accident of chemical or hazardous goods or in the case of a terrorist act involving toxic gases. Thus it can measure the gas concentration in the immediate vicinity of the object which causes the emission. A further stage of extension is to enhance the system for plume tracking and identification of sources of hazardous gases. T2 - ROSE 2010 - IEEE International workshop on robotic and sensors environments CY - Phoenix, Arizona, USA DA - 2010-10-15 KW - Autonomous robot KW - UAV KW - Quadrocopter KW - Mobile sensing system KW - Chemical sensing KW - Gas sensors KW - Chemical source localization KW - Plume tracking KW - Anemometric sensor KW - Wind speed and direction PY - 2010 SN - 978-1-4244-7146-1 DO - https://doi.org/10.1109/ROSE.2010.5675265 IS - Session 1 - Intelligent Sensing SP - 1 EP - 6 AN - OPUS4-22189 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maack, Stefan T1 - Qualitätssicherung mit modernen ZfPBau-Verfahren zur Vermeidung von Bauwerksversagen beim Bauen im Bestand T2 - Bau-Fachtagung Dächer von Hallen - Detaillösungen für Sanierung, Instandhaltung und Überwachung CY - Berlin, Germany DA - 2010-10-14 PY - 2010 AN - OPUS4-22190 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Rabe, Torsten ED - Kriegesmann, J. T1 - Hochintegrierte LTCC-Multilayer KW - Keramische Multilayer KW - LTCC KW - Co-Sinterung PY - 2010 SN - 978-3-938595-00-8 IS - Kap. 8.5.1.2 SP - 1 EP - 48 PB - HvB-Verlag CY - Ellerau AN - OPUS4-22191 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Wöhlecke, Andreas A1 - Tatzky-Gerth, R. T1 - Richtlinie für die Zulassung von Kunststoffdichtungsbahnen für Deponieabdichtungen KW - Zulassungsrichtlinien KW - Geokunststoffe KW - Deponieverordnung PY - 2010 SN - 0340-7551 SP - 1 EP - 33 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin ET - 3. Auflage AN - OPUS4-22192 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Wöhlecke, Andreas A1 - Tatzky-Gerth, R. T1 - Richtlinie für die Zulassung von Kunststoff-Dränelementen für Deponieoberflächenabdichtungen KW - Zulassungsrichtlinien KW - Geokunststoffe KW - Deponieverordnung PY - 2010 SN - 0340-7551 SP - 1 EP - 30 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-22193 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Wöhlecke, Andreas A1 - Tatzky-Gerth, R. T1 - Richtlinie für die Zulassung von Geotextilien zum Filtern und Trennen für Deponieabdichtungen KW - Zulassungsrichtlinien KW - Geokunststoffe KW - Deponieverordnung PY - 2010 SN - 0340-7551 SP - 1 EP - 25 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-22194 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Wöhlecke, Andreas A1 - Tatzky-Gerth, R. T1 - Richtlinie für die Anforderungen an Fachbetriebe für den Einbau von Kunststoffdichtungsbahnen, weiteren Geokunststoffen und Kunststoffbauteilen in Deponieabdichtungssystemen KW - Zulassungsrichtlinien KW - Geokunststoffe KW - Deponieverordnung PY - 2010 SN - 0340-7551 SP - 1 EP - 15 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin ET - 2. Auflage AN - OPUS4-22195 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bonse, Jörn A1 - Solis, J. A1 - Spielmann, C. A1 - Lippert, T. A1 - Krüger, Jörg T1 - Damage mechanisms in polymers upon NIR femtosecond pulse laser irradiation: sub-threshold processes and their implications for laser safety applications N2 - This contribution investigates laser-induced damage of thin film and bulk polymer samples, with the focus on physical processes occurring close to the damage threshold. In-situ real-time reflectivity (RTR) measurements with picosecond (ps) and nanosecond (ns) temporal resolution were performed on thin polymer films on a timescale up to a few microseconds (µs). A model for polymer thin film damage is presented, indicating that irreversible chemical modification processes take place already below the fluence threshold for macroscopic damage. On dye-doped bulk polymer filters (as used for laser goggles), transmission studies using fs-and ps-laser pulses reveal the optical saturation behavior of the material and its relation to the threshold of permanent damage. Implications of the sub-threshold processes for laser safety applications will be discussed for thin film and bulk polymer damage. T2 - International high-power laser ablation conference CY - Santa Fe, USA DA - 2010-04-18 KW - Polymer KW - Laser damage KW - Ultrashort laser pulses KW - Time-resolved reflectivity measurements KW - Laser safety PY - 2010 UR - http://link.aip.org/link/?APCPCS/1278/56/1 SN - 978-0-7354-0828-9 DO - https://doi.org/10.1063/1.3507148 N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings IS - 1278 SP - 56 EP - 64 PB - American Institute of Physics CY - Melville, NY, USA AN - OPUS4-22156 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Senoner, Mathias A1 - Sahre, Mario A1 - Unger, Wolfgang T1 - Neuartige räumlich strukturierte Testproben für die Bestimmung der Abbildungsqualität und die Kalibrierung der Längenskala in der Rastersondenmikroskopie T2 - Abschlusskolloquium zum DFG-Schwerpunktprogramm "Neue Strategien der Mess- und Prüftechnik für die Produktion von Mikrosystemen und Nanostrukturen" (SPP 1159) CY - Erlangen, Germany DA - 2010-10-06 PY - 2010 AN - OPUS4-22157 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lange, Th. A1 - Klemm, E. A1 - Heinrich, Sebastian A1 - Liebner, Christian A1 - Hieronymus, Hartmut T1 - Untersuchung heterogen katalysierter Selektivoxidationen im Explosionsbereich unter Verwendung von Mikrostrukturreaktoren T2 - ProcessNet Jahrestagung 2010 CY - Aachen, Germany DA - 2010-09-21 PY - 2010 AN - OPUS4-22158 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gorbushina, Anna T1 - Mikrobiologische Perspektiven der Materialkunde T2 - 12. Mitgliedstreffen des Berliner Kreises der GUS Gesellschaft für Umweltsimulation e. V. CY - Berlin, Germany DA - 2010-10-19 PY - 2010 AN - OPUS4-22159 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Müller, Bernd R. T1 - Optimierte Rohdatenanalyse faserbasierter Werkstoffe durch Weiterentwicklung des iterativen CT-Algorithmus DIRECTT T2 - Vortrag am Institut für Stochastik, Universität Ulm CY - Ulm, Germany DA - 2010-09-29 PY - 2010 AN - OPUS4-22160 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brauser, Stephan A1 - Weber, Gert A1 - Rethmeier, Michael T1 - Potenzial optischer Dehnungsfeldmessung zur Charakterisierung der Eigenschaften von Widerstandspunktschweißverbindungen N2 - Die Ermittlung lokaler Werkstoffkennwerte im Schweißbereich ist für die Auslegung sicherheitsrelevanter Bauteile insbesondere durch Finite-Elemente-Berechnungen von großer Bedeutung. Konventionelle Prüfmethoden können lediglich globale Kennwerte bereitstellen, die jedoch gerade für die Berechnung widerstandspunktgeschweißter Bauteile häufig nicht ausreichen, da diese durch das Vorliegen örtlich eng begrenzter Fügezonen gekennzeichnet sind. Moderne Prüfmethoden wie die optische Dehnungsfeldmessung ermöglichen hingegen eine orts- und zeitkonkrete Bestimmung der Werkstoffkenndaten. Um das Potenzial optischer Dehnungsfeldmessungen für das Charakterisieren des lokalen Werkstoffverhaltens von Punktschweißverbindungen zu ermitteln, wurden Scherzugversuche sowie Zugversuche an widerstandspunktgeschweißten hochfesten Stählen durchgeführt. Die Ergebnisse zeigen das hohe Potenzial dieses Verfahrens sowohl für die Quantifizierung des lokalen Dehnungsverhaltens im Fügebereich als auch für die Ermittlung lokaler Werkstoffkenndaten. PY - 2010 SN - 0036-7184 VL - 62 IS - 9 SP - 496 EP - 500 PB - Verl. für Schweißen u. Verwandte Verfahren, DVS-Verl. CY - Düsseldorf AN - OPUS4-22163 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brauser, Stephan A1 - Kromm, Arne A1 - Kannengießer, Thomas A1 - Rethmeier, Michael T1 - In-situ synchrotron diffraction and digital image correlation technique for characterizations of retained austenite stability in low-alloyed transformation induced plasticity steel N2 - Direct measurement and quantification of phase transformation in a low-alloyed transformation induced plasticity steels depending on the tensile load as well as determination of the real true stress and true strain values were carried out in-situ using high energy synchrotron radiation. Digital image correlation technique was used to quantify more precisely the true strain values. The aim of the work was to obtain a better understanding of the phase transformation of commercial low-alloyed transformation induced plasticity steel depending on the true strain and true stress values. KW - Transformation induced plasticity KW - In-situ synchrotron diffraction KW - Austenite stability KW - Digital image correlation PY - 2010 DO - https://doi.org/10.1016/j.scriptamat.2010.08.007 SN - 1359-6462 SN - 1872-8456 VL - 63 IS - 12 SP - 1149 EP - 1152 PB - Elsevier CY - Oxford AN - OPUS4-22164 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Quiroz Penaranda, Vanessa A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Laser beam welding of austenitic manganese-alloyed stainless steels T2 - INOX 2010 - 10th Brazilian stainless steel conference CY - Rio de Janeiro, Brazil DA - 2010-09-20 PY - 2010 SP - 254 EP - 269 AN - OPUS4-22165 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Burkert, Andreas A1 - Lehmann, Jens A1 - Wilbert, Hans-Peter T1 - Edelstahl Rostfrei - Korrosionserscheinungen beim Einsatz im Außenbereich KW - Nichtrostender Stahl KW - Bauwesen KW - Dauerhaftigkeit KW - Korrosion PY - 2010 SN - 0178-6571 VL - 10 SP - 34 EP - 36 PB - Montan- u. Wirtschaftsverlag GmbH CY - Düsseldorf AN - OPUS4-22196 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Fischer, Joachim A1 - Mietz, Jürgen A1 - Lehmann, Jens A1 - Ebell, Gino T1 - Neues DGZfP - Merkblatt der elektrochemischen Potentialfeldmessung zur Detektion von Bewehrungsstahlkorrosion T2 - Tagung Korrosionsschutz der Stähle im Kontakt mit Beton - Neue Entwicklungen und Forschungsergebnisse CY - Stuttgart-Vaihingen, Deutschland DA - 2010-10-07 KW - Verfahrensbeschreibung KW - Messraster KW - Einflussgrößen KW - Fehlerquellen KW - Prüfprotokoll KW - Nachweisgrenzen PY - 2010 SN - 978-3-935406-43-7 SP - 149 EP - 156 CY - Frankfurt/M. AN - OPUS4-22197 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ebell, Gino A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Korrosions- und Verbundverhalten verzinkter Betonstähle in Betonen mit chromatreduzierten Zementen T2 - Tagung Korrosionsschutz der Stähle im Kontakt mit Beton - Neue Entwicklungen und Forschungsergebnisse CY - Stuttgart-Vaihingen, Deutschland DA - 2010-10-07 KW - Chromatreduzierter Zement KW - Verzinkter Betonstahl KW - Chrom VI KW - Verbundzone KW - Wasserstoff KW - Beton PY - 2010 SN - 978-3-935406-43-7 SP - 83 EP - 99 CY - Frankfurt/M. AN - OPUS4-22198 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lehmann, Jens A1 - Burkert, Andreas A1 - Ebell, Gino A1 - Burkert, Annette A1 - Mietz, Jürgen T1 - Verwendung von verzinkten Einbauteilen in vorgespannten Fertigbetonbauteilen T2 - Tagung Korrosionsschutz der Stähle im Kontakt mit Beton - Neue Entwicklungen und Forschungsergebnisse CY - Stuttgart-Vaihingen, Deutschland DA - 2010-10-07 KW - Spannstahl KW - Wasserstoffinduzierte Spannungsrisskorrosion KW - Verzinkte Einbauteile KW - Spannbeton KW - Kathodische Polarisation KW - Einflussgrößen KW - Praktische Bedeutung PY - 2010 SN - 978-3-935406-43-7 SP - 101 EP - 114 CY - Frankfurt/M. AN - OPUS4-22199 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Streicher, Doreen A1 - Taffe, Alexander A1 - Boller, C. T1 - Quantitative Ermittlung der Leistungsfähigkeit von Radar an Stahl- und Spannbetonbauteilen N2 - Die Kenntnis der Leistungsfähigkeit von zerstörungsfreien Prüfverfahren im Bauwesen (ZfPBau-Verfahren) ist eine wichtige Grundlage für deren zunehmende Akzeptanz in der Baupraxis. Insbesondere bei Radar wird von Anwendern immer wieder nachgefragt, bis in welche Tiefe, bei welchem Betonalter und mit welcher Antennenfrequenz schlaffe Bewehrung zuverlässig geortet werden kann. Die Frage nach der Eindringtiefe in Bezug zum Betonalter ist insofern von Bedeutung, dass eine erfolgreiche Anwendung an Bestandsbauwerken an vergleichbaren Bauteilen aus jungem Beton misslingen kann, wenn die Anwendungsgrenzen von Radar an jungem Beton nicht richtig eingeschätzt werden. Da in realen Bauteilen der Bewehrungsgehalt stark differiert, ist für den Anwender auch von Interesse, wie sich die Zuverlässigkeit des Verfahrens mit zunehmender Verlegedichte der oberflachennahen Bewehrung ändert. In diesem Beitrag werden systematische Untersuchungen an Stahlbetonbauteilen mit Bewehrungsstäben in variierender Verlegetiefe bei zunehmendem Betonalter und zunehmender Verlegedichte der oberflächennahen Bewehrung vorgestellt. Die Untersuchungen erfolgten unter Verwendung von Radarantennen mit Signalmittenfrequenzen von 1,2 GHz-, 1,6 GHz- und 2,3 GHz. Die Dielektrizitätszahl εr wird bezüglich ihrer Streuung im Bauteil quantifiziert. Daraus ergeben sich ebenso Kenntnisse über die Streuung der Wellenausbreitungsgeschwindigkeit, die beim Einsatz von Migrationsalgorithmen von großer Bedeutung sind. Die Ergebnisse zum Eindringverhalten von Radar werden dem Anwender quantitativ in Abhängigkeit vom Betonalter und der Signalmittenfrequenz der Radarantennen zur Verfügung gestellt. In tabellarischer Form bieten die Ergebnisse so eine wichtige Orientierungshilfe für Untersuchungen an neu errichteten Stahl- und Spannbetonbauteilen und können als Ergänzung des DGZfP-Merkblatts B10 dienen. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Radar KW - Messunsicherheit nach GUM KW - Stahlbeton KW - Detektionstiefe KW - ZfP im Bauwesen PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Mo.3.B.1) SP - 1 EP - 9 CY - Berlin AN - OPUS4-22200 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Portius, P. A1 - Filippou, A.C. A1 - Schnakenburg, G. A1 - Davis, M. A1 - Wehrstedt, Klaus-Dieter T1 - Neutrale Lewis-Basen-Addukte des Siliciumtetraazids KW - Azide KW - Hyperkoordination KW - N-Liganden KW - Silicium KW - Stickstoffreiche Verbindungen PY - 2010 DO - https://doi.org/10.1002/ange.201001826 SN - 0044-8249 SN - 0932-2140 SN - 1521-3757 VL - 122 IS - 43 SP - 8185 EP - 8189 PB - Wiley-VCH CY - Weinheim AN - OPUS4-22201 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Portius, P. A1 - Filippou, A.C. A1 - Schnakenburg, G. A1 - Davis, M. A1 - Wehrstedt, Klaus-Dieter T1 - Neutral lewis base adducts of silicon tetraazide KW - Silicon KW - Azides KW - Hypercoordination KW - Nitrogen-rich compounds KW - N-ligands PY - 2010 DO - https://doi.org/10.1002/anie.201001826 SN - 1433-7851 SN - 1521-3773 SN - 0570-0833 VL - 49 IS - 43 SP - 8013 EP - 8016 PB - Wiley-VCH CY - Weinheim AN - OPUS4-22202 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lehnik-Habrink, Petra A1 - Hein, Sebastian A1 - Nehls, Irene T1 - Multi-residue analysis of PAH, PCB and OCP optimized for organic matter of forest oil T2 - International Symposium on Environmental Analytical Chemistry CY - Rome, Italy DA - 2010-10-04 PY - 2010 AN - OPUS4-22204 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Köppen, Robert A1 - Koch, Matthias A1 - Klein-Hartwig, Karin A1 - Nehls, Irene T1 - Natürliche Umwelt- und Lebensmitteltoxine: Herstellung eines Referenzmaterials für die Mykotoxine T-2 und HT-2 PY - 2010 SN - 0934-3504 SN - 1865-5084 VL - 22 IS - 4 SP - 407 PB - Springer CY - Heidelberg AN - OPUS4-22205 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hönnscheidt, Christoph A1 - Thiermann, Raphael A1 - Maskos, Michael T1 - Continuous Synthesis of Functional Nanoparticles T2 - Polydays 2010 CY - Berlin, Germany DA - 2010-10-03 PY - 2010 AN - OPUS4-22146 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koshkina, Olga A1 - Bleul, Regina A1 - Bantz, C. A1 - Maskos, Michael T1 - Fluorescent Dye-labeled Polyorganosiloxane Nanospheres for Biomedical Applications T2 - Polydays 2010 CY - Berlin, Germany DA - 2010-10-03 PY - 2010 AN - OPUS4-22147 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pretsch, Thorsten T1 - Shape Memory Polymer Research @ BAM T2 - Seminar Institut für Mikrotechnik Mainz CY - Mainz, Germany DA - 2010-10-11 PY - 2010 AN - OPUS4-22148 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meyer-Scherf, Ronald A1 - Krause, Andreas T1 - A New Technology for Hydrogen Storage: Glass Structures as Storages System T2 - 9th ISCARW Hydrogen and Fuel Cell Early Market Applications CY - Belfast, Northern Ireland DA - 2010-10-14 PY - 2010 N1 - Geburtsname von Meyer-Scherf, Ronald: Meyer, R. - Birth name of Meyer-Scherf, Ronald: Meyer, R. AN - OPUS4-22149 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weber, Gert A1 - Gaul, Holger A1 - Rethmeier, Michael T1 - Resistance Spot Welding and Weldbonding of Advanced High Strength Steels T2 - MSE 2010 CY - Darmstadt, Germany DA - 2010-08-24 PY - 2010 AN - OPUS4-22150 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weber, Gert A1 - Gaul, Holger A1 - Rethmeier, Michael T1 - Mechanical Properties of Weldbonded Joints of Advanced High Strength Steels T2 - 4th International Conference on Advanced Computational Engineering and Experimenting, ACE-X CY - Paris, France DA - 2010-07-08 PY - 2010 AN - OPUS4-22151 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John T1 - Stand der Normung / Revision und Neueinführung von BAM-GGRs T2 - BAM AK-Prüfstellen CY - Berlin, Germany DA - 2010-09-22 PY - 2010 AN - OPUS4-22152 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John T1 - BAM-GGR 012 - eine neue Gefahrgutregel für den Nachweis der chemischen Verträglichkeit von Verpackungen zur Beförderung gefährlicher Güter aus PE und aus koextrudiertem Kunststoff T2 - AK-Inspektionsstellen, BAM CY - Berlin, Germany DA - 2010-09-28 PY - 2010 AN - OPUS4-22153 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John T1 - BAM-GGR011 - der Entwurf neuer Verfahrensregeln für den Nachweis der ausreichenden chemischen Verträglichkeit von Verpackungen zur Beförderung gefährlicher Güter aus PE und aus koextrudiertem Kunststoff gegenüber flüssigen Stoffen T2 - ERFA-Verpackungen, BAM CY - Berlin, Germany DA - 2010-07-07 PY - 2010 AN - OPUS4-22154 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pentzien, Simone A1 - Conradi, Andrea A1 - Koter, Robert A1 - Krüger, Jörg T1 - Cleaning of artificially soiled paper using nanosecond, picosecond and femtosecond laser pulses N2 - Cleaning of cultural assets, especially fragile organic materials like paper, is a part of the conservation process. Laser radiation as a non-contact tool offers prospects for that purpose. For the studies presented here, paper model samples were prepared using three different paper types (pure cellulose, rag paper, and wood-pulp paper). Pure cellulose serves as reference material. Rag and woodpulp paper represent essential characteristics of the basic materials of real-world artworks. The papers were mechanically soiled employing pulverized charcoal. Pure and artificially soiled paper samples were treated with laser pulses of 28 fs (800 nm wavelength) and 8–12 ns (532 nm) duration in a multi pulse approach. Additionally, the cellulose reference material was processed with 30 ps (532 nm) laser pulses. Damage and cleaning thresholds of pure and soiled paper were determined for the different laser regimes. Laser working ranges allowing for removal of contamination and avoiding permanent modification to the substrate were found. The specimens prior and after laser illumination were characterized by light-optical microscopy (OM) and scanning electron microscopy (SEM) as well as multi spectral imaging analysis. The work extends previous nanosecond laser cleaning investigations on paper into the ultra-short pulse duration domain. KW - Laser cleaning KW - Ablation KW - Laser impact on surfaces KW - Paper KW - Femtosecond laser PY - 2010 DO - https://doi.org/10.1007/s00339-010-5809-7 SN - 0947-8396 VL - 101 IS - 2 SP - 441 EP - 446 PB - Springer CY - Berlin AN - OPUS4-22155 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Komann, Steffen A1 - Droste, Bernhard A1 - Wille, Frank T1 - Transport of Large Nuclear Power Plant Components - Experiences in Mechanical Design Assessment - T2 - 16.th International Symposium on the Packaging and Transport of Radioactive Materials CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-22216 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zencker, Uwe A1 - Weber, Mike A1 - Qiao, Linan A1 - Droste, Bernhard A1 - Völzke, Holger T1 - Mechanical Safety Analyses of Cast Iron Containers for the KONRAD Repository T2 - 16th InternationalSymposium on the Packaging and Transport of Radioactive Materials CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-22217 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zencker, Uwe A1 - Weber, Mike A1 - Wille, Frank T1 - Finite element mesh design of a cylindrical cask under puncture drop test conditions T2 - 16th International Symposium on the Packaging and Transport of Radioactive Materials CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-22218 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fedelich, Bernard T1 - Multiscale modelling of diffusion controlled grain boundary cavitation during creep of metals T2 - 6th International Conference on Materials Structure & Micromechanics of Fracture (MSMF-6) CY - Brno, Czech Republic DA - 2010-06-28 PY - 2010 AN - OPUS4-22225 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gook, Sergej A1 - Gumenyuk, Andrey A1 - Lammers, Marco A1 - Rethmeier, Michael T1 - Peculiarities of the process of orbital laser-arc welding of thick-walled large-diameter pipes KW - Hybrid laser-arc welding KW - Orbital welding KW - High-pressure pipelines KW - Fibre-optic lasers PY - 2010 SN - 0005-111x SN - 0005-2302 VL - 689 IS - 9 SP - 5 EP - 13 CY - Kiev, Ukraine AN - OPUS4-22979 LA - rus AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Murtazin, Ayrat A1 - Groh, S. A1 - Niemax, Kay T1 - Measurement of element mass distributions in particle ensembles applying ICP-OES N2 - End-on inductively coupled plasma optical emission spectrometry (ICP-OES) of the relative mass distributions in ensembles of spherical SiO2 particles with small and large size variations is presented. The particles are introduced into the ICP by injection of monodisperse microdroplets generated from diluted particle suspensions. The spectroscopic signals, taking into account the peak or the integrated intensities of the Si 288.16 nm line, are compared with mass distribution measurements of corresponding SiO2 particle ensembles performed by Scanning Electron Microscopy (SEM). It is found that the relative mass distributions measured by ICP-OES are in good agreement with SEM measurements if the spectroscopic signal to noise ratio is sufficiently large indicating that intensity variations due to different particle trajectories in the ICP are less important than expected. PY - 2010 DO - https://doi.org/10.1039/c004946h SN - 0267-9477 SN - 1364-5544 VL - 25 IS - 9 SP - 1395 EP - 1401 PB - Royal Society of Chemistry CY - London AN - OPUS4-22982 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Diwakar, P.K. A1 - Groh, S. A1 - Niemax, Kay A1 - Hahn, D.W. T1 - Study of analyte dissociation and diffusion in laser-induced plasmas: implications for laser-induced breakdown spectroscopy N2 - Plasma–particle interactions are explored through the introduction of single microdroplets into laser-induced plasmas. Both spectroscopic analysis and direct imaging of analyte atomic emission are used to provide insight into the various fundamental processes, namely desolvation, atomization, and atomic diffusion. By doping the 50 µm droplets with Lu, Mg or Ca, the analyte excitation temperature and the ion-to-neutral emission ratio are explored as a function of plasma residence time following breakdown. The data suggest a change in the local plasma conditions about the analyte atoms around 15–20 µs following breakdown, which may be interpreted as an overall transition from localized (i.e. perturbed) plasma conditions to the global (i.e. bulk) plasma conditions. A direct assessment of the hydrogen atomic diffusion coefficient following analyte desolvation reveals a value of 1.7 m² s-1 in the first 250–500 ns. This value is in good overall agreement with a theoretical analysis and with an analytical treatment of a surface source of hydrogen atoms. In contrast, calcium emission is only observed beyond about 1 µs, with a diffusion coefficient at least an order of magnitude below the hydrogen value. The temporal H and Ca emission data suggest that water vaporizes first, leaving an ever increasing Ca analyte concentration until finally, with nearly all water desorbed, the Ca fraction is vaporized. Overall, the data support the conclusion that finite time-scales of heat and mass transfer play an important role in localized plasma perturbations in the vicinity of the analyte, which has important implications for the LIBS analyte signal. PY - 2010 DO - https://doi.org/10.1039/c0ja00063a SN - 0267-9477 SN - 1364-5544 VL - 25 IS - 12 SP - 1921 EP - 1930 PB - Royal Society of Chemistry CY - London AN - OPUS4-22983 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Structural health monitoring systems for reinforced concrete structures KW - Structural health monitoring KW - Sensors KW - Fibre-optic sensor KW - Damage assessment KW - Reinforced concrete PY - 2010 SN - 978-1-84569-950-5 VL - 2 SP - 63 EP - 94 PB - Woodhead Publ. AN - OPUS4-22984 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang A1 - Schukar, Vivien T1 - Reliability issues when using fibre optic strain sensors for materials investigations and structural monitoring N2 - Reliable measurement results with fibre optic sensors require profound knowledge of physical mode of function, of materials used and appropriate application. There is often serious discrepancy between use in laboratory environment and on site. The paper identifies important aspects to be considered and shows ways to transfer innovations onto practical use. T2 - Photonics 2010 - 10th International conference on fiber optics & photonics CY - Guwahati, India DA - 2010-12-11 KW - Fibre optic sensors KW - Reliability KW - Validation KW - Calibration KW - Long-term stability KW - Materials behaviour KW - Speckle-interferometry KW - 3D-image correlation KW - Strain measurement PY - 2010 SN - 978-81-309-1719-1 SP - 1 EP - 4 AN - OPUS4-22985 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Behrens, Matthias A1 - Lange, Marco A1 - Maack, Stefan A1 - Milmann, Boris A1 - Wöstmann, Jens A1 - Hintzpeter, F T1 - Bildgebende Ortung von Ablösungen in mehrschichtigen Betonbauteilen mit dem Ultraschallecho-Verfahren T2 - Fachtagung Bauwerksdiagnose, 18.-19.02.2010, Berlin CY - Berlin, Germany DA - 2010-02-18 PY - 2010 AN - OPUS4-22997 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter A1 - Schönbucher, A. T1 - Pool and tank fires - Are we really prepared? N2 - The industrial fire accidents e.g. Buncefield (2005) and Jaipur (2009) have come up with several issues concerning safe storage and transportation of flammable liquids. The pre and post fire consequences are therefore important to be analyzed prior to the handling of flammable fuels. Pool or/and tank fire is the most often seen scenario after the leak/spill of liquid fuel. An overview of the typical scenarios from large hydrocarbon and organic peroxide pool fires and their respective safety distances for the people and the infrastructure are the important subjects of this paper. T2 - 8th Asia-Pacific conference on combustion CY - Hyderabad, India DA - 2010-12-10 KW - Flammable liquids KW - Pool fire KW - Safety distance KW - Organic peroxides PY - 2010 SP - 697 EP - 702 AN - OPUS4-23004 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Huismann, Sven T1 - Materialverhalten von hochfestem Beton unter thermomechanischer Beanspruchung N2 - Das Materialverhalten von hochfestem Beton unter thermomechanischer Beanspruchung unterscheidet sich wesentlich von dem des normalfesten Betons. Dies bedeutet, dass bestehende Annahmen sowie Berechnungsverfahren mit zugehörigen Materialparametern, die von einem normalfesten Beton ausgehen, nicht ohne weiteres auf den hochfesten Beton übertragen werden können. Im Rahmen dieser Arbeit wurde daher exemplarisch für einen hochfesten Beton das Verhalten unter thermomechanischer Beanspruchung untersucht. Dabei wurden die Einflüsse verschiedener Randbedingungen bei der Prüfung sowie der Einfluss von Polypropylenfasern (PP-Fasern) im Beton auf die thermomechanischen Materialeigenschaften charakterisiert und ein wesentlicher Beitrag zur Klärung der Ursachen geleistet. Weiterhin wurde mit Hilfe der gewonnenen Kennwertfunktionen ein Materialmodell entwickelt und damit das Trag- und Verformungsverhalten von Stahlbetonstützen aus hoch-festem Beton unter Brandbeanspruchung rechnerisch beschrieben. Anhand eines Bauteilversuchs wurde das Berechnungsverfahren validiert. Die Bearbeitung erfolgte in drei Teilen. In dem ersten Teil dieser Arbeit wurde ein thermomechanischer Prüfstand entwickelt, in dem die Ermittlung der thermomechanischen Materialkennwertfunktionen exemplarisch für einen hochfesten Beton erfolgte. Ein wesentlicher Untersuchungsgegenstand war der Einfluss der Belastungsgeschichte während der Erwärmung auf die Spannungs-Dehnungs-Linien. Dabei wurde eine Reduzierung des temperaturbedingten Abfalls der Festigkeit und des E-Moduls mit zunehmender Belastung und Temperatur festgestellt. Mit zerstörungsfreien und zerstörenden Prüfverfahren konnte gezeigt werden, dass die Belastung während der Erwärmung eine Orientierung der Risse bewirkt und dadurch der Abfall in der Festigkeit und dem E-Modul verringert wird. Der Einfluss hoher lokaler Temperaturgradienten auf die thermomechanischen Kennwertfunktionen wurde ebenfalls untersucht. Zwar entstehen infolge thermomechanischer Spannungen zusätzliche Risse im Betongefüge, diese wirken sich jedoch nicht wesentlich auf die thermomechanischen Kennwertfunktionen aus. Weiterhin wurde der Einfluss von PP-Fasern auf das Verformungsverhalten des Betons bei instationärer Temperaturbeanspruchung untersucht. Mit Hilfe thermogravimetrischer Versuche konnte gezeigt werden, dass die PP-Fasern durch ihre Wirkung im Beton den Feuchtetransport je nach Aufheizrate zwischen 180 °C und 250 °C beschleunigen. Dies führt zum Schwinden des Zementsteins, das der thermischen Dehnung entgegenwirkt und in der Verformungskurve als Stagnation wahrgenommen wird. Ohne PP-Fasern findet der Feuchtetransport wesentlich langsamer statt und eine Stagnation in der Verformungskurve bleibt aus. Bei Temperaturen oberhalb von 300 °C sind die thermischen Dehnungen des Betons mit PP-Fasern geringer und die mechanischen Dehnungen höher als ohne PP-Fasern. In dem zweiten Teil dieser Arbeit wurden Stahlbetonstützen aus dem gleichen Beton, für den die thermomechanischen Kennwertfunktionen ermittelt wurden, unter Brandbeanspruchung geprüft. Nach der Beanspruchung erfolgte zusätzlich die Charakterisierung der Rissbildung mittels 3D-Röntgen-Computertomographie. In dem dritten Teil dieser Arbeit wurde auf der Grundlage der Ergebnisse des ersten Teils ein Materialmodell in Anlehnung an den Eurocode 2 entwickelt. Mit diesem konnte das Trag- und Verformungsverhalten der Stahlbetonstützen aus hochfestem Beton im Brandfall hinreichend genau abgebildet werden. Im Rahmen der Validierung zeigte sich, dass die charakteristischen Kenngrößen des Modells (E-Modul und Festigkeit) zwingend aus den instationären Kriechversuchen abgeleitet werden müssen. Sofern die Festigkeit nur aus den stationären Versuchen abgeleitet wird, wird das Tragverhalten deutlich überschätzt. KW - Hochfester Beton KW - Temperatur KW - Thermomechanik KW - Instationäres Temperaturkriechen KW - Schallemissionsanalyse KW - Ultraschall KW - Polypropylen-Fasern KW - Brand KW - Numerische Simulation KW - Stützen PY - 2010 SN - 0171-7197 IS - 590 SP - 1 EP - 135 PB - Beuth CY - Berlin AN - OPUS4-23005 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kuhlich, Paul A1 - Göstl, Robert A1 - Metzinger, R. A1 - Piechotta, Christian A1 - Nehls, Irene T1 - 3,5,5,6,8,8-Hexamethyl-5,6,7,8-tetrahydro-2-naphthoic acid (AHTN-COOH) KW - AHTN KW - Tonalide KW - Cyclilc musk KW - AHTN-COOH KW - Disinfection by-product KW - Haloform reaction PY - 2010 DO - https://doi.org/10.1107/S1600536810038572 SN - 1600-5368 VL - 66 IS - 10 SP - o2687, sup-1 - sup-12 PB - Munksgaard CY - Copenhagen AN - OPUS4-23006 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Ulrich T1 - Conduction-diffusion problems - „exotics“ in fire simulations? N2 - Fire simulation is mostly understood as simulation of room fires, i.e. where the free volume is large compared to the volume occupied by the combustible matter. In such a case, the fire propagation is predominantly a fluid dynamics problem. Fire propagation through bulk materials, insulation layers or wooden construction elements is, however, determined by conduction and diffusion. For these cases modified modelling principles and different software solutions have to be applied. Computational results are presented for temperature evolution and charring progress in a timber beam exposed to ISO standard temperature curve, for self-ignition and fire propagation in a waste deposit with consideration to conduction/diffusion and convection inside the porous medium and for a fire in an underground coal seam where conduction/diffusion is the prevailing mechanism. T2 - 11th International symposium on fire protection CY - Leipzig, Germany DA - 2010-06-08 KW - Self-ignition KW - Porous media KW - Fire simulation KW - Smouldering PY - 2010 SP - 1 EP - 13 AN - OPUS4-22958 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert T1 - Advanced NDT Methods for Quality Assurance of Concrete Structures T2 - National Seminar on Non-Destructive Evaluation NDE 2010 CY - Kolkata, India DA - 2010-12-09 PY - 2010 AN - OPUS4-22959 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe T1 - Funktionalisierung von Oberflächen mittels Mikro- und Nanotechnologien T2 - Measurement Valley Workshop "Funktion und Oberflächen" CY - Göttingen, Germany DA - 2010-02-10 PY - 2010 AN - OPUS4-22962 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Blome, Mark A1 - Pelkner, Matthias A1 - Reimund, Verena A1 - Kreutzbruck, Marc T1 - Flux leakage measurements for defect characterization using a high precision 3-axial GMR magnetic sensor T2 - 15. ITG/GMA-Fachtagung - Sensoren und Messsysteme 2010 CY - Nürnberg, Deutschland DA - 2010-05-18 PY - 2010 SN - 978-3-8007-3260-9 IS - 151/A6 SP - 809 PB - VDE-Verl. CY - Berlin; Offenbach AN - OPUS4-22963 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Parameterstudien zum Einfluss von Rezepturveränderungen auf Schwindverhalten, Rissneigung und Steifigkeit mineralischer Instandsetzungsmörtel T2 - 7. Internationales Kolloquium Industrieböden, TAE CY - Ostfildern, Germany DA - 2010-12-14 PY - 2010 AN - OPUS4-22964 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herbst, Tristan A1 - Hauer, B. A1 - Rübner, Katrin A1 - Meng, Birgit T1 - Teilprojekt B - Potenziale des Sekundärstoffeinsatzes T2 - 54. Ulmer Betontage CY - Neu-Ulm, Germany DA - 2010-02-09 PY - 2010 AN - OPUS4-22965 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Paul, Andrea T1 - Light activation of humic matter (HM) - radicals and reactive species T2 - Symposium "Redoxchemie von Huminstoffen" an der ETH-Zürich CY - Zurich, Switzerland DA - 2010-01-24 PY - 2010 AN - OPUS4-23037 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin A1 - Matyschik, Jan T1 - Optimierung des Rückbaus / Abbruchs von Gebäuden zur Rückgewinnung und Aufbereitung von hochwertigen Baustoffen T2 - Workshop "Verwertung ressourcenrelevanter Stoffe aus dem anthropogenen Lager" CY - Berlin, Germany DA - 2010-11-09 PY - 2010 AN - OPUS4-23038 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wang, D. A1 - Costa, F. R. A1 - Leuteritz, A. A1 - Purohit, Purv A1 - Schönhals, Andreas A1 - Vyalikh, A. A1 - Scheler, U. A1 - Wagenknecht, U. A1 - Kutlu, B. A1 - Heinrich, G. ED - Mittal, V. T1 - Polyolefin nanocomposites with layered double hydroxides PY - 2010 SN - 978-1-4398-1454-3 SP - 225 EP - 245 PB - CRC Press AN - OPUS4-23039 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - de Oliveira, Rui A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - Michaud, V. T1 - Development of adaptive composites with embedded plastic optic fibres N2 - This study discusses the development of advanced composite materials with sensing capabilities obtained from the embedment of long period gratings in microstructured plastic optical fibres (mPOF-LPG). The mPOF-LPG was embedded in a carbon fibre reinforced polymer (CFRP) unidirectional laminate manufactured in autoclave. Processing steps were established in order to insure that mPOF does not suffer significant optical and structural degradation. The strain and temperature responses of the embedded mPOF-LPG were investigated. T2 - ICRACM 2010 - 3rd International conference on recent advances in composite materials CY - Limoges, France DA - 2010-12-13 KW - Polymer composites KW - Optical fibre sensors KW - mPOF-LPG KW - SHM PY - 2010 IS - Polymer composite session / FP-Oliveira SP - 1 EP - 6 AN - OPUS4-23040 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Lenke, Peter A1 - Liehr, Sascha A1 - Nöther, Nils A1 - Wendt, Mario A1 - Wosniok, Aleksander A1 - Schneider-Gloetzl, J. A1 - Gloetzl, R. T1 - Distributed fibre optic sensors embedded in technical textiles for monitoring of geotechnical and masonry structures T2 - Monitoring technologies workshop - MoDeRn (Proceedings) CY - Troyes, France DA - 2010-06-07 PY - 2010 IS - OP.7 SP - 71 EP - 72 AN - OPUS4-23041 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kluge, Martin A1 - Eliezer, D. A1 - Holtappels, Kai A1 - Krause, Heike A1 - Ried, Peter T1 - Pressure resistance of glass capillary structures for gas storage purposes T2 - 1st International conference on materials for energy CY - Karlsruhe, Germany DA - 2010-07-04 KW - Dimerization KW - Numerical simulation KW - CFD KW - FEM KW - Self heating KW - TFE PY - 2010 SN - 978-3-89746-117-8 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. SP - 752 EP - 754 AN - OPUS4-23042 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, P. A1 - Markötter, H. A1 - Klages, M. A1 - Haußmann, J. A1 - Arlt, Tobias A1 - Riesemeier, Heinrich A1 - Hartnig, C. A1 - Banhart, J. A1 - Manke, I. A1 - Scholta, J. T1 - Dreidimensionale Untersuchung der Wasserverteilung in einer Miniatur-PEM-Brennstoffzelle KW - Resolution neutron-radiography KW - Local current distribution KW - Cells KW - Quantification PY - 2010 SN - 0025-5300 VL - 52 IS - 10 SP - 712 EP - 717 PB - Hanser CY - München AN - OPUS4-23044 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Arlt, Tobias A1 - Manke, I. A1 - Wippermann, K. A1 - Schröder, A. A1 - Mergel, J. A1 - Riesemeier, Heinrich A1 - Banhart, J. T1 - Röntgen-Kanten-Tomografie und -Radiografie zur Untersuchung von Alterungseffekten in Brennstoffzellenmaterialien KW - Resolution neutron-radiography KW - Local current distribution KW - Water transport KW - Carbon-dioxide KW - Methanol KW - Platinum KW - Oxidation PY - 2010 SN - 0025-5300 VL - 52 IS - 10 SP - 692 EP - 697 PB - Hanser CY - München AN - OPUS4-23045 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Markötter, H. A1 - Manke, I. A1 - Hartnig, C. A1 - Krüger, P. A1 - Wippermann, K. A1 - Arlt, Tobias A1 - Choinka, G. A1 - Riesemeier, Heinrich A1 - Banhart, J. T1 - Hochauflösende Synchrotron-Radiografie KW - PEM Fuel-cells KW - Local current distribution KW - Neutron imaging technique KW - Water transport PY - 2010 SN - 0025-5300 VL - 52 IS - 10 SP - 698 EP - 704 PB - Hanser CY - München AN - OPUS4-23046 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Christoph A1 - Proske, Matthias T1 - Neue Verfahren zur chemisch-analytischen Ansprache von Adhesion-Agents auf Glasoberflächen T2 - Wissenschaftliches Meeting (BASt - Bundesanstalt für Straßenwesen) CY - Bergisch Gladbach, Germany DA - 2010-12-15 PY - 2010 AN - OPUS4-22967 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Christoph T1 - Vergleichende Bewertung digi-optischer und konventioneller Verfahren zur Erfassung von konformfehlerbehafteter und intransparenter Reflexpartikel T2 - Wissenschaftliches Meeting (BASt - Bundesanstalt für Straßenwesen) CY - Bergisch Gladbach, Germany DA - 2010-12-15 PY - 2010 AN - OPUS4-22968 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pfister, Sabine A1 - Krause, Ulrich T1 - Numerische Untersuchung der Brandausbreitung in einem Tanklager T2 - Workshop Brandschutzforschung CY - Magdeburg, Germany DA - 2010-10-04 PY - 2010 AN - OPUS4-22970 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kitze, Jessica A1 - Brackrock, Daniel A1 - Brekow, Gerhard A1 - Prager, Jens A1 - Gaal, Mate A1 - Kreutzbruck, Marc A1 - Szabo, D. A1 - Kuti, K. A1 - Paczolay, G. T1 - SAFT und TOFD - Ein Vergleich im Analyseverhalten von Reflektoren T2 - 15. ITG/GMA-Fachtagung - Sensoren und Messsysteme 2010 CY - Nürnberg, Deutschland DA - 2010-05-18 PY - 2010 SN - 978-3-8007-3260-9 IS - C5/115 SP - 650 EP - 657 PB - VDE-Verl. CY - Berlin; Offenbach AN - OPUS4-22971 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Prager, Jens A1 - Hoever, Carsten A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc T1 - Flaw detection with guided waves using phased array technique N2 - Guided waves travel in plates and hollow cylinders over large distances and propagate with multiple mode shapes. Therefore the waves can be used viably for integrity tests of large scale structures. The number of propagating modes increases with frequency. Due to their dispersive character the different modes are manageable only in a limited frequency range. Depending on the wave length and on the angle of impingement of the wave front to the coupling surface between transducer and structure, a trace wavelength is predefined and a selective excitation of single modes becomes feasible. By using phased array technique the excited wave mode can be selected by controlling the input signal of the transducer. Different modes are excitable with a sin-gle mechanical set-up. In a first step of the investigation, a calculation model is developed modelling the wave propagation and the selective excitation of guided wave modes depending on the control parameters. Dedicated experiments show the applicability of the method presented. The flaw detection of different sized cracks and of material thickness reductions is examined depending on the excitation wave mode. T2 - ECNDT 2010 - 10th European conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 KW - Ultrasonic testing KW - Guided waves KW - Plate-like structures PY - 2010 SN - 978-1-617-82791-4 SP - 1 EP - 10 AN - OPUS4-22972 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kervalishvili, Guram N. A1 - Schlichting, Joachim A1 - Maierhofer, Christiane A1 - Kreutzbruck, Marc T1 - Heat transfer modeling of local thermal excitation for surface crack detection and characterization N2 - In the presented paper the use of local excitation (laser beam) for crack detection and characterization is simulated. As we could see, using the temperature differences between two reference points was large enough to detect and characterize the crack, even for such small value of laser power as 2 W. The influence of radiation and convection on the temperature difference was negligible (about 0.1%). The influence of heat conduction, in case of crack with air, was very small (about 3%). The main mechanism which influences the temperature differences between the reference points is the heat conduction in steel. From the presented results one can see that temperature differences are increasing with an increase of the crack depth or the crack length. Better resolution and characterization of the crack depths and lengths should be achieved with increased duration of heating time or the laser power. We could also see that the best position for the laser spot to characterize the crack is the closest one. Also, comparison of 2D and 3D simulation results for circular heat source used as local excitation mechanism had showed that only full 3D modelling will allow accomplishing a quantitative level of comparison between experimental and simulation results. T2 - ECNDT 2010 - 10th European conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 KW - Thermography KW - Heat transfer modeling KW - Surface crack PY - 2010 SN - 978-1-617-82791-4 SP - 1 EP - 10 AN - OPUS4-22973 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völz, Uwe A1 - Mrasek, Heinz A1 - Matthies, Klaus A1 - Kreutzbruck, Marc T1 - Visualization of sound propagation with electrodynamic probes N2 - When dealing in ultrasonic testing with inhomogeneous material structure data interpretation can be rather difficult. This is especially the case when using anisotropic dissimilar welds made from austenitic steel or nickel based alloys, which are currently used for modern power plant concepts. For better understanding of the complex interaction between the sound field and the component under test, the visualization of sound propagation in solids is a substantial task to increase the probability of detection of relevant defects. However, there exist only a small number of appropriate techniques published today, such as scanning laser interferometer, piezoelectric and optical approaches in case of transparent solids. In this work we present an electrodynamic technique providing a simple use and a high signal to noise ratio. By detecting the grazing beam with an electrodynamic probe with a size smaller than 10 mm, we measured the particle displacement as a function of time with a spatial resolution in the order of 1 mm. Adapting the electrodynamic probe and its coil alignment allows for measuring the displacement components in all three dimensions. This comprises the detection of the horizontal and vertical particle displacement with respect to the surface and thus also the transformation from longitudinal waves into transversal waves and vice versa is possible. A SNR of higher than 36 dB could be achieved within ferromagnetic and high conductive chrome steel when using a transversal wave generated by an angled beam transducer. We report on measurements of the sound field in complex weld joints. One example shows a 10 mm thick narrowgap weld joining a nickel alloy with a chrome steel yielding a substantial anisotropy of the weld structure. The test system enables us to visualize the wave propagation within the weld and indicates the reflection scenario and the energy losses due to both the anisotropic structure and material defects. T2 - ECNDT 2010 - 10th European conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 KW - Ultrasonic KW - Sound field KW - Visualization KW - Electrodynamic probe KW - Nondestructive testing (NDT) KW - Nickel alloy KW - Anisotropic weld KW - Narrow-gap weld PY - 2010 SN - 978-1-617-82791-4 SP - 1 EP - 8 AN - OPUS4-22974 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Katharina A1 - Staude, Andreas A1 - Goebbels, Jürgen A1 - Riesemeier, Heinrich A1 - Reiche, I. T1 - Identification of prehistoric bone and ivory materials by synchrotron radiation-induced micro X-ray CT T2 - 2nd Joint Berll and BESSY II Users Meeting CY - Berlin, Germany DA - 2010-12-09 PY - 2010 AN - OPUS4-22975 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Praxisrelevante Ergebnisse zum Thema Verfleckungen T2 - Sitzung des Ausschusses Marketing der Informationsstelle Edelstahl Rostfrei CY - Düsseldorf, Germany DA - 2010-11-25 PY - 2010 AN - OPUS4-22976 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schukar, Vivien A1 - Münzenberger, Sven A1 - Gründer, Klaus-Peter A1 - Habel, Wolfgang T1 - Experimental validation technique for strain transfer characterisation of fibre bragg grating based strain sensors N2 - A unique testing facility (KALFOS) using ESPI (electronic speckle pattern interferometery) as a referencing method has been realized for the characterisation of the strain transfer process from a component under load into surface applied fibre Bragg grating based strain sensors. The strain transfer mechanism can be described experimentally, while matching specific measurement requirements and environmental conditions. T2 - Photonics 2010 - 10th International conference on fiber optics & photonics CY - Guwahati, India DA - 2010-12-11 PY - 2010 SN - 978-81-309-1719-1 IS - Poster\255_SEN_Schukar_V_G_1_full SP - 1 EP - 4 AN - OPUS4-23007 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Caron, J. A1 - Heinze, Christoph A1 - Schwenk, Christopher A1 - Rethmeier, Michael A1 - Babu, S. S. A1 - Lippold, J. ED - Cerjak, H. ED - Enzinger, N. T1 - Sensitivity analysis of martensite transformation temperatures with respect to numerical calculation of welding-induced residual stresses KW - Schweißsimulation KW - Eigenspannungen KW - Martensitbildung KW - Sensivitätsanalyse KW - Sysweld KW - Welding simulation KW - Residual stresses KW - Martensite kinetic KW - Sensitivity analysis PY - 2010 SN - 978-3-85125-127-2 SP - 215 EP - 238 PB - Verlag der Technischen Universität Graz AN - OPUS4-23008 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Ulrich T1 - Conduction-diffusion problems - "exotics" in fire simulations? T2 - 11. International Symposioum on Fire Protection CY - Leipzig, Germany DA - 2010-06-08 PY - 2010 AN - OPUS4-23009 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schönhals, Andreas T1 - Molecular Dynamics of glass-forming materials revealed by a combintaion of broadband dielectric, specific heat and neutron spectroscopy T2 - Joint Softmatter Seminar CY - Jülich, Germany DA - 2010-12-15 PY - 2010 AN - OPUS4-23011 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias A1 - Scholz, Christian A1 - Spaltmann, Dirk T1 - Wälzbeständigkeit von Hochleistungsdünnschichten und hochzähen Stahlsubstraten bis 3.8 GPa Hertz'scher Kontaktpressung T2 - GfT Tribologie-Fachtagung CY - Göttingen, Germany DA - 2010-09-27 PY - 2010 AN - OPUS4-23033 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rabe, Frederik A1 - Hofmann-Böllinghaus, Anja A1 - Krause, Ulrich T1 - Vergleich von Computional Fluid Dynamics-Programmen in der Anwendung auf Brandszenarien in Gebäuden T2 - Workshop Brandschutzforschung CY - Magdeburg, Germany DA - 2010-10-04 PY - 2010 AN - OPUS4-23034 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Binner, Richard A1 - Homberg, U. A1 - Kalbe, Ute A1 - Witt, K. J. A1 - Prohaska, S. T1 - Identification of descriptive Parameters of the soil pore structure using experiments and CT data T2 - 5th International Conference on Scour and Erosion CY - San Francisco, CA, USA DA - 2010-11-07 PY - 2010 AN - OPUS4-23035 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Matyschik, Jan A1 - Weimann, Karin T1 - Sulfate in Bauschutt - Herkunft und Auswirkungen - T2 - Recycling R´10, Fachtagung der Professur Aufbereitung von Baustoffen und Wiederverwertung der Bauhaus- Universität Weimar CY - Weimar, Germany DA - 2010-09-22 PY - 2010 AN - OPUS4-23036 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heinze, Christoph A1 - Kromm, Arne A1 - Schwenk, Christopher A1 - Kannengießer, Thomas A1 - Rethmeier, Michael T1 - Welding Residual Stresses Depending on Solid-State Transformation Behaviour Studied by Numerical and Experimental Methods T2 - 8th European Conference on Residual Stresses CY - Riva del Garda, Italy DA - 2010-06-26 PY - 2010 AN - OPUS4-22996 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Dobmann, G. A1 - Kurz, J.H. A1 - Taffe, Alexander A1 - Streicher, Doreen ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Development of automated non-destructive evaluation (NDE) systems for reinforced concrete structures and other applications N2 - The introduction of an innovative process for non-destructive testing is described in terms of its different phases and how the process is controlled in the Fraunhofer IZFP in order to obtain optimal results. Examples are discussed of applications by IZFP in various important and safety-relevant industrial sectors where the automated inspection systems were introduced. These case studies include the inspection of railway components such as the wheel sets of the German high-speed train and in-line pipe inspection by using intelligent pipeline inspection gauges. Complex inspection systems, both hardware and software, developed in partnership with the Federal Institute for Materials Research and Inspection (BAM), were applied to inspection tasks in civil engineering. Two automated systems based on a robot and on a flexible manipulation are presented. Both systems can be applied to diverse inspection technologies and to the data fusion of various types of non-destructive testing (NDT) data. KW - Automated inspection systems KW - Non-destructive testing KW - Civil engineering KW - Robots KW - Data fusion KW - Railway components PY - 2010 SN - 978-1-84569-950-5 IS - Chapter 3 SP - 30 EP - 62 PB - Woodhead Publ. AN - OPUS4-23759 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ballheimer, Viktor A1 - Wille, Frank A1 - Droste, Bernhard T1 - Mechanical safety analysis for high burn-up spent fuel assemblies under accident transport conditions T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Accident transport conditions KW - Fuel rods KW - High burn-up KW - Failure PY - 2010 SP - 1 EP - 8(?) AN - OPUS4-23760 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rücker, Werner A1 - Rohrmann, Rolf A1 - Fritzen, C.-P. A1 - Trappe, Volker A1 - Habel, Wolfgang T1 - Results and experiences from the research project IMO-WIND N2 - Following a modular concept an integrated monitoring system has been developed that includes all components of offshore wind turbines (OWEC). Using commercially available measurement equipments of the involved partners this system was tested at the wind turbine Multibrid M5000_2 in Bremerhaven. Additional results of the research project are findings on the use of embedded FBG sensors in rotor blades that allow condition assessments based on local information. Newly developed algorithms for the identification of external loads and damage characteristics of the structural components have been tested in operation. Developed methods for monitoring based structural assessment were used, which will be suitable to optimize structural maintenance works. T2 - DEWEK 2010 - 10th German wind energy conference CY - Bremen, Germany DA - 2010-11-17 KW - Offshore wind turbines KW - Integrated monitoring system KW - Data management KW - Design verification KW - Structural assessment KW - Limit values KW - Load identification KW - Data analysis KW - Damage identification KW - Rotor blades KW - Embedded sensors PY - 2010 IS - P11.8 SP - 1 EP - 4 PB - DEWI GmbH AN - OPUS4-23714 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Qiao, Linan A1 - Zencker, Uwe A1 - Wille, Frank A1 - Musolff, André T1 - Numerical simulation of 9 meter drop of a transport and storage cask with aluminium impact limiter N2 - For the purpose of numerical simulation of 9 meter drop of a transport and storage cask with aluminium impact limiter, an elastic-incremental plastic material model with strain rate hardening acc. to Cowper-Symonds is used for the development of isothermal as well as adiabatic stress-strain relations of aluminium from the compression test at constant ambient temperature. After that, two different simulation strategies are compared. At first, the drop test is calculated fully coupled, i.e. with isothermal stress-strain relations and possible heat generation in the material. Then the drop test is recalculated in a very simplified manner with adiabatic stress-strain relations from the compression test in an isothermal simulation. Both calculation strategies show similar results in the investigated load scenario. T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Drop test KW - Spent fuel transport cask KW - Finite element calculation KW - Dynamic simulation KW - Impact limiter KW - Aluminium PY - 2010 SP - 1-8 (Monday-T16-117) AN - OPUS4-23707 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Purohit, Purv A1 - Schönhals, Andreas T1 - Dielectric Investigation of Nanocomposites based on Polypropylene and Layered Double Hydroxide T2 - Dielectric Bazaar, 6th International Conference on Dielectric Spectroscopy and its Applications CY - Madrid, Spain DA - 2010-09-06 PY - 2010 AN - OPUS4-23742 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reith, F. A1 - Fairbrother, L. A1 - Nolze, Gert A1 - Wilhelmi, O. A1 - Clode, P. L. A1 - Gregg, A. O. A1 - Parsons, J. E. A1 - Wakelin, S. A. A1 - Pring, A. A1 - Hough, R. A1 - Southam, G. A1 - Brugger, J. T1 - Nanoparticle factories: Biofilms hold the key to gold dispersion and nugget formation N2 - Biofilms living on gold (Au) grains play a key role in the biogeochemical cycle of Au by promoting the dispersion of Au via the formation of Au nanoparticles as well as the formation of secondary biomorphic Au. Gold grains from Queensland, Australia, are covered by a polymorphic, organic-inorganic layer that is up to 40 μm thick. It consists of a bacterial biofilm containing Au nanoparticles associated with extracellular polymeric substances as well as bacterioform Au. Focused ion beam (FIB) sectioning through the biofilm revealed that aggregates of nanoparticulate Au line open spaces beneath the active biofilm layer. These aggregates (bacterioform Au type 1) resulted from the reprecipitation of dissolved Au, and their internal growth structures provide direct evidence for coarsening of the Au grains. At the contact between the polymorphic layer and the primary Au, bacterioform Au type 2 is present. It consists of solid rounded forms into which crystal boundaries of underlying primary Au extend, and is the result of dealloying and Ag dissolution from the primary Au. This study demonstrates that (1) microbially driven dissolution, precipitation, and aggregation lead to the formation of bacterioform Au and contribute to the growth of Au grains under supergene conditions, and (2) the microbially driven mobilization of coarse Au into nanoparticles plays a key role in mediating the mobility of Au in surface environments, because the release of nanoparticulate Au upon biofilm disintegration greatly enhances environmental mobility compared to Au complexes only. KW - Nanomaterial KW - Gold KW - Electron backscatter diffraction PY - 2010 DO - https://doi.org/10.1130/G31052.1 VL - 38 IS - 9 SP - 843 EP - 846 PB - Geological Society of America AN - OPUS4-37995 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schweikhard, E. S. A1 - Kuhlmann, S. I. A1 - Kunte, Hans-Jörg A1 - Grammann, K. A1 - Ziegler, C. M. T1 - Structure and function of the universal stress protein TeaD and its role in regulating the ectoine transporter TeaABC of halomonas elongata DSM 2581T N2 - The halophilic bacterium Halomonas elongata takes up the compatible solute ectoine via the osmoregulated TRAP transporter TeaABC. A fourth orf (teaD) is located adjacent to the teaABC locus that encodes a putative universal stress protein (USP). By RT-PCR experiments we proved a cotranscription of teaD along with teaABC. Deletion of teaD resulted in an enhanced uptake for ectoine by the Transporter TeaABC and hence a negative activity regulation of TeaABC by TeaD. Atranscriptional regulation viaDNA binding could be excluded. ATP binding to native TeaD was shown by HPLC, and the Crystal structure of TeaD was solved in complex with ATP to a resolution of 1.9 A ° by molecular replacement. TeaD forms a dimer-dimer complex with one ATP molecule bound to each monomer, which has a Rossmann-like R/β overall fold. Our results reveal an ATP-dependent oligomerization of TeaD, which might have a functional role in the regulatory mechanism of TeaD. USP-encoding orfs, which are located adjacent to genes Encoding for TeaABC homologues, could be identified in several other organisms, and their physiological role in balancing the internal cellular ectoine pool is discussed. KW - Universal stress protein KW - Ectoine KW - Transporter TeaABC PY - 2010 DO - https://doi.org/10.1021/bi9017522 SN - 1520-4995 SN - 0006-2960 VL - 49 IS - 10 SP - 2194 EP - 2204 AN - OPUS4-37682 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sitzman, S. D. A1 - Nolze, Gert A1 - Nowell, M. M. T1 - EBSD Pattern Quality and its Use in Evaluating Sample Surface Condition N2 - Modern EBSD systems perform diffraction pattern “quality” (PQ) calculations, essentially measurements of the contrast of the brighter bands in the pattern above background, for every pattern analyzed. Since the calculations are independent of EBSD indexing, data are generated from all points on the analyzed sample surface, regardless of indexability or the state of the material beneath. EBSD maps generated from PQ data are like microstructurally sensitive SEM images, collected at EBSD speeds and grid resolutions, with contrast arising from phase density, crystal structure, crystallographic orientation, grain boundary location, near-surface plastic strain, coating density/thickness, and to some extent topography. Grain boundaries and other aspects of sample microstructure are readily revealed, so the PQ map is a very useful characterization tool in its own right, and serves as a reference for EBSD maps generated from indexing-derived data, such as orientation, grain boundary character, phase distribution and strain maps. KW - Electron backscatter diffraction KW - Sample preparation KW - Pattern quality PY - 2010 DO - https://doi.org/10.1017/S143192761005467X VL - 16 IS - Suppl. 2 SP - 698 EP - 699 PB - Microscopy Society of America AN - OPUS4-37997 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nolze, Gert A1 - Winkelmann, Aimo T1 - Progress in dynamic EBSD pattern simulation N2 - EBSD is nowadays a common technique for the characterization of crystalline microstructures in scanning electron microscopy. The diffraction patterns are often interpreted by superimposing individual Kikuchi bands which are geometrically described by band edges derived from Braggs law. For the typically very simple crystal structures of technically applied materials, such a simplification of the Kikuchi pattern interpretation works sufficiently well, especially for orientation determinations as a main application of EBSD. The more complex crystal structures, however, are a challenge for EBSD indexing routines which in such cases often fail unpredictably. The use of only the intensities of single reflectors for a description of the Kikuchi band intensity and as a cut-off criterion for a pre-selection of the strongest bands are not satisfactory. Often the result will match too many phases, or there are certain deviations in the intensity prediction which must be adapted manually. This is already problematic if one is absolutely sure that the patterns are originating from the expected phase and it becomes a very questionable procedure for an unknown phase. KW - Electron backscatter diffraction KW - Dynamical simulation KW - Geometrical model KW - Kinematic approach KW - Intensity PY - 2010 DO - https://doi.org/10.1017/S1431927610063324 VL - 16 IS - Suppl. 2 SP - 62 EP - 63 PB - Microscopy Society of America AN - OPUS4-38000 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rolle, Annette A1 - Droste, Bernhard A1 - Schubert, Sven A1 - Probst, Ulrich A1 - Wille, Frank T1 - Verification of activity release compliance with regulatory limits within spent fuel transport casks T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Radioactive material KW - Safety assessment KW - Leakage mechanism KW - Leakage rate KW - Sealing behavior PY - 2010 SP - 1 EP - 8(?) AN - OPUS4-32193 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rolle, Annette A1 - Neumeyer, Tino A1 - Droste, Bernhard T1 - Testing of sealed radioactive sources at BAM T2 - IRPA 2010, Third European International radiation Association Congress CY - Helsinki, Finnland DA - 2010-06-14 PY - 2010 AN - OPUS4-32252 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rolle, Annette A1 - Droste, Bernhard A1 - Schubert, Sven A1 - Probst, Ulrich A1 - Wille, Frank T1 - Verification of activity release cpmpliance with regulatory limits within spent fuel transport casks T2 - PATRAM 2010, 16th Interntional Symposium on the Packaging and Transport of Radioactive Materials CY - London, UK DA - 2010-10-03 PY - 2010 AN - OPUS4-32259 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert T1 - Advanced NDT methods for quality assurance of concrete structures T2 - National Seminar on NDE 2010 CY - Kolkata, India DA - 2010-12-09 KW - Beton KW - Qualitätssicherung KW - Zerstörungsfreie Prüfung PY - 2010 SP - 1 EP - 8 AN - OPUS4-34610 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN T1 - Untersuchung der Statistik "Unfälle mit wassergefährdenden Stoffen" des Statistischen Bundesamtes aus dem Jahr 2007 im Vergleich zu den Vorjahren N2 - Die BAM untersucht regelmäßig Statistiken über Unfälle mit wassergefährdenden Stoffen sowie Datenerhebungen zu Gefahrgutunfällen. Ziel ist es, Hinweise zu Tendenzen und Lücken abzuleiten, die möglicherweise Anlass für weitere Aktivitäten und Maßnahmen geben, z. B. im rechtlichen Bereich oder in der Praxis. Regelmäßig beobachtete Unfallstatistiken über Jahre geben einen guten Überblick über das Unfallgeschehen in Deutschland. Dieser Bericht betrachtet das Jahr 2007 im Vergleich zu den Vorjahren. KW - Gefahrgutunfälle KW - Unfallstatistik KW - Wassergefährdende Stoffe PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-355008 SP - 1 EP - 86 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-35500 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Niebergall, Ute T1 - Comparison of the stress crack resistance of polyethylene grades with the test performance behaviour of packagings for the transport of dangerous goods N2 - Technically high-quality hollow articles made of polyethylene have proved many times their value as dangerous goods packagings. Design type tests according to the international regulations for the transport of dangerous goods - drop test, stacking test, hydraulic pressure test and leakproofness test must be performed for every design type and manufacturer. The properties melt flow rate (MFR), relative density (D), low temperature notched Impact strength (N.I.S.) at -30 °C, environmental stress crack resistance (FNCT) and resistance to oxidative degradation Ox by nitric acid (determined by the increase of MFR) have been selected together with the corresponding test methods and tolerances for a comparison of polyethylene grades of one design type in the procedural rule on suitability proof for alternative plastic resins used for dangerous goods packagings and intermediate bulk containers (IBCs) – EN 15507. We wanted to proof the practical relevance of this standard by comparing the relationship between the results of the FNCT and the times to failure of design types in stacking tests with wetting solution and normal butyl acetate saturated wetting solution. T2 - EUROCORR 2010 CY - Moscow, Russia DA - 13.09.2010 KW - Drop test KW - Stacking test KW - Hydraulic pressure test KW - Leakproofness test PY - 2010 AN - OPUS4-35843 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Woydt, Mathias ED - Czichos, Horst ED - Habig, K.-H. T1 - Hochtemperaturtribologie N2 - Die Temperatur ist eine fundamentale Beanspruchungs- bzw. Einflussgröße für alle tribologischen Systeme. Für die in zahlreichen tribologischen Systemen benötigten Schmierstoffe liegen die thermischen Stabilitätsgrenzen bei etwa 400?°C. Es wird die tribologische Prüftechnik für Tribomaterialien beschrieben, die für den Einsatz in tribologischen Systemen bei hohen Betriebstemperaturen verwendbar sind. Ausgehend von metallurgischen Lösungsansätzen aus der Tribologieforschung werden Anwendungsmöglichkeiten hochtemperaturbeständiger Ingenieurwerkstoffe mit Beispielen aus der Automobiltechnik (Luftlagerung von Turboladern, Leistungssteigerung von Bremsmaterialien), der Fertigungstechnik (Standzeitverlängerung von Werkzeugen) und dem chemischen Anlagenbau (Effizienzsteigerung von Kühlkreisläufen) dargestellt. PY - 2010 SN - 978-3-8348-1810-2 DO - https://doi.org/10.1007/978-3-8348-2236-9_18 SP - Kap. 18, 633 EP - 646 PB - Springer-Vieweg CY - Wiesbaden ET - 4. Auflage / 2015 AN - OPUS4-33840 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert A1 - Reinhardt, H.W. ED - Thompson, D.O. ED - Chimenti, D.E. T1 - NDT in civil engineering: experience and results of the FOR 384 research group T2 - 36th Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Kingston, RI, USA DA - 2009-07-26 KW - Non-destructive testing in civil engineering KW - Ultrasonic pulse echo KW - Impact-echo KW - Ground penetrating radar KW - Validation KW - Concrete KW - Zerstörungsfreie Prüfung KW - Ultraschall Echo KW - Impact Echo KW - Radar KW - Beton KW - Validierung PY - 2010 SN - 978-0-7354-0748-0 SN - 0743-0760 SN - 0094-243X N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings VL - 29 SP - 47 EP - 54 CY - Melville, NY AN - OPUS4-34933 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kind, Thomas A1 - Wöstmann, Jens A1 - Feistkorn, Sascha A1 - Trela, Christiane ED - Meßinger, Jens T1 - Radar in der Baupraxis: Lokalisierung von zweilagig vorgespannter Bewehrung in Beton N2 - Die Ermittlung der genauen Bewehrungslage ist von großem Interesse bei der Instandsetzung und Ertüchtigung von Stahlbetonbauwerken. Denn nur wenn die Lage der für die Standsicherheit wichtigen Bewehrung bekannt ist, können Kernbohrungen oder Sägearbeiten schadensfrei durchgeführt werden. Das Bodenradar als zerstörungsfreie Methode ist wegen des einfachen Verfahrens der Antenne entlang einer Messspur für eine solche Aufgabenstellung sehr gut geeignet. Die Anwendung kann aber eingeschränkt werden, wenn die gesuchte Bewehrung zu tief liegt oder durch eine davor liegende Bewehrung abgeschattet wird. Bei der Ortung mehrlagiger Bewehrung ist es wichtig, einen mehrstufigen und effizienten Messplan zu erstellen, der den Aufwand auf einem vertretbaren Maß beschränkt und die Möglichkeit bietet, beim Erreichen der Verfahrensgrenzen rechtzeitig die Untersuchung abzubrechen. Am Beispiel einer Stahlbetonbrücke, die nachträglich mit externen Spanngliedern versehen wurde, wird das Vorgehen beim Orten von mehrlagiger Bewehrung gezeigt. T2 - Georadar - Erfahrungen und Perspektiven CY - Freiberg, Germany DA - 24.09.2009 KW - Radar KW - Zerstörungsfreie Prüfung KW - Stahlbeton PY - 2010 SN - 0947-1944 VL - I SP - 1 EP - 6 PB - Dt. Geophysikalische Ges. CY - Potsdam AN - OPUS4-39827 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN ED - Wloka, Monika T1 - DAR-aktuell - Kurzinformation - Akkreditierung, Zertifizierung, Prüfung - Jahrgang 18, Ausgabe 1 T1 - DAR-aktuell - newsletter - accreditation, certification, testing - volume 18, edition 1 N2 - Die hier vorliegende Kurzinformation hat das Ziel, über Neues auf dem Gebiet der Akkreditierung, Zertifizierung und Prüfung in Deutschland und Europa sowie über Inhalte und Ergebnisse der Arbeit verschiedener auf diesem Sektor tätigen Organisationen zu informieren. N2 - The aim of this newsletter is to inform about new developments in the area of accreditation, certification and testing in Germany and Europe as well as about topics and results of the work of several organisations that are active in this sector. PY - 2010 SN - 1436-154X SN - 1436-1558 SN - 1436-2082 N1 - Volltext (PDF) in deutsch und englisch - Full text (PDF) in German and English VL - 18 IS - 1 SP - 1 EP - 4 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-40223 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vogl, Jochen A1 - Koenig, Maren A1 - Pritzkow, Wolfgang A1 - Riebe, Gundel T1 - Development of reference procedures for the quantification of toxic metals and S in plastics N2 - The quantitative analysis of toxic metals in plastics is very important for different sectors of industry and daily life. Many routine procedures have been established based on X-ray fluorescence or inductively coupled plasma atomic emission spectrometry. However, all of them require suitable reference materials to calibrate or validate. These reference materials ideally are being certified by reference procedures. The development of such reference procedures for sulfur and the four toxic elements cadmium, chromium, mercury and lead in plastics is described here. The procedures are based on double isotope dilution mass spectrometry including analyte–matrix separation. The applied mass spectrometric techniques are thermal ionization mass spectrometry as well as inductively coupled plasma mass spectrometry. Memory effects of mercury and dissolution of chromium(III) oxide have been considered especially. The expanded uncertainties have been improved from the percent range down to the per mill range during the development of the procedure from the early analysis of BCR-680/681 to the recent analysis of CCQM-P106. With the fully developed procedures expanded uncertainties (k = 2) between 0.1 and 0.4% for cadmium, chromium, lead and sulfur and around 1% for mercury can be achieved. The so developed procedures have been successfully applied to the certification of reference materials as well as to intercomparisons organized by CCQM. KW - ICPMS KW - TIMS KW - Reference materials KW - IDMS PY - 2010 DO - https://doi.org/10.1039/c0ja00034e SN - 0267-9477 SN - 1364-5544 VL - 25 IS - 10 SP - 1633 EP - 1642 PB - Royal Society of Chemistry CY - London AN - OPUS4-22044 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vogl, Jochen A1 - Pritzkow, Wolfgang T1 - Isotope reference materials for present and future isotope research N2 - Isotope reference materials are essential to enable reliable and comparable isotope data. This article reviews the work in this field within the past years. The focus is on all stable elements, except for classical stable isotopes (H, C, N, O, S) and for radioactive elements. Currently available isotope reference materials are listed. The limitations of synthetic isotope mixtures being used to characterize these materials are discussed, as well as the limitations of the isotope reference materials, such as uncertainty and homogeneity. The needs for present research on isotope variations are being considered and are compared to the limitations of current isotope reference materials. This disagreement between both can only be solved by providing isotope reference materials defining a δ-scale for each element of interest. Such materials should be provided with additional data on isotope abundances whenever possible. As an outlook a possible outline for a new program on isotope reference materials is discussed. KW - IRM KW - Isotope reference materials KW - Delta-RM KW - ICPMS KW - TIMS KW - Synthetic mixtures PY - 2010 DO - https://doi.org/10.1039/c000509f SN - 0267-9477 SN - 1364-5544 VL - 25 SP - 923 EP - 932 PB - Royal Society of Chemistry CY - London AN - OPUS4-21841 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Shokouhi, Parisa A1 - Niederleithinger, Ernst A1 - Zoëga, Andreas A1 - Barner, Andreas A1 - Schöne, Dieter T1 - Using ultrasonic coda wave interferometry for monitoring stress-induced changes in concrete T2 - 23rd SAGEEP Symposium on the application of geophysics to engineering and environmental problems CY - Keystone, Colorado, USA DA - 2010-04-11 KW - Coda wave interferometry KW - Concrete KW - Beton KW - Stress KW - Ultrasonics KW - Ultraschall PY - 2010 SN - 1554-8015 SP - 650 EP - 654 AN - OPUS4-21570 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogl, Jochen A1 - Rosner, Martin A1 - Pritzkow, Wolfgang T1 - Development and validation of a single collector ICPMS procedure for the determination of boron isotopic variations in food and water samples T2 - 9. Symposium Massenspektrometrische Verfahren der Elementspurenanalyse, 22. ICP-MS Anwendertreffen CY - Berlin, Germany DA - 2010-09-06 PY - 2010 AN - OPUS4-22562 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ma, L. A1 - Feng, L. A1 - Hioki, A. A1 - Cho, K.H. A1 - Vogl, Jochen A1 - Berger, Achim A1 - Turk, G. A1 - Macleod, S. A1 - Labarraque, G. A1 - Tong, W.F. A1 - Schiel, D. A1 - Yafa, C. A1 - Valiente, L. A1 - Konopelko, L.A. A1 - Quetel, C. A1 - Vermaercke, P. A1 - Manzano, J.V.L. A1 - Linsky, M. A1 - Cortés, E. A1 - Tangpitayakul, S. A1 - Plangsangmas, L. A1 - Bergamaschi, L. A1 - Hearn, R. T1 - International comparison of the determination of the mass fraction of cadmium, chromium, mercury and lead in polypropylene: the Comité Consultatif pour la quantité de matière pilot study CCQM-P106 KW - Cadmium KW - Chromium KW - Mercury KW - Lead KW - Polypropylene KW - CCQM PY - 2010 DO - https://doi.org/10.1007/s00769-009-0574-z SN - 0949-1775 SN - 1432-0517 VL - 15 IS - 1 SP - 39 EP - 44 PB - Springer CY - Berlin AN - OPUS4-20787 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Helmerich, Rosemarie A1 - Niederleithinger, Ernst A1 - Trela, Christiane A1 - Bien, J. A1 - Kaminski, T. A1 - Bernardini, G. T1 - Multi-tool inspection and numerical analysis of an old masonry arch bridge N2 - Complex special inspection of an old masonry arch bridge according to the Guideline on Inspection and Condition Assessment of Railway Bridges and numerical analysis of the structure are presented. The guideline summarises recommendations for the step-by-step investigation of railway bridges applying enhanced methods developed during the EU-funded project Sustainable Bridges. For the investigation of the arch barrel, the ballast parameters and the inner structure of the backfill behind the arch barrel a number of various advanced non-destructive and minor-destructive testing methods were applied. Deformation of the structure during load tests was measured using three independent measuring systems: laser vibrometer, LVDT and microwave radar. Results of calculations performed with 2D and 3D models based on FEM are compared with the field load tests. Sensitivity of the ultimate load of the structure to investigated parameters is studied in FE model. Some general conclusions according to methods of testing and modelling of masonry arch bridges are presented and discussed. KW - Masonry bridges KW - Non-destructive testing KW - Bridge inspection KW - Finite element method PY - 2010 DO - https://doi.org/10.1080/15732471003645666 SN - 1573-2479 SN - 1744-8980 IS - NSIE_A_465075 SP - 1 EP - 13 PB - Taylor & Francis CY - London AN - OPUS4-22838 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Sabine A1 - Niederleithinger, Ernst A1 - Krause, Martin A1 - Bohlen, T. T1 - Reverse time migration: A seismic imaging technique applied to ultrasound data T2 - NDE/NDT for highways and bridges - Structural materials technology (SMT) CY - New York, USA DA - 2010-08-16 KW - Ultraschall KW - Rekonstruktion KW - Migration PY - 2010 SN - 978-1-57117-211-2 SP - 554 EP - 559 CY - Columbus, OH, USA AN - OPUS4-22543 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst A1 - Fritsche, M. T1 - Measurement of sheet pile length by pile integrity testing and the parallel seismic method T2 - 23rd SAGEEP Symposium on the application of geophysics to engineering and environmental problems CY - Keystone, Colorado, USA DA - 2010-04-11 KW - Spundwand KW - Sheet piles KW - Parallel seismic KW - Parallel-Seismik KW - Integrity testing KW - Integritätsprüfung PY - 2010 SN - 1554-8015 SP - 675 EP - 691 AN - OPUS4-22542 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael T1 - Prozessanalytik als Instrument des Informationsmanagements in der Chemischen und Pharmazeutischen Industrie N2 - Die Wettbewerbsfähigkeit der Chemischen und Pharmazeutischen Industrie basiert auf der Sicherung der geforderten Produktqualität bei einer optimalen Nutzung von Anlagen, Rohstoffen und Energie [1]. Eine gute Prozessführung unter Einsatz zuverlässiger Prozessanalytik sichert hier den globalen Wettbewerbsvorteil gegenüber Niedriglohnländern, die mit weniger effizienten Verfahren produzieren. Prozessanalytik trägt zur Erhöhung der Prozess- und Anlagensicherheit bei. In Kombination mit geeigneten Informationsmanagementsystemen verbessert dieser Ansatz ständig das Wissen über den Prozess und führt damit zu einer präventiven Sicherstellung der geforderten Qualität. KW - Datenbanken KW - Informationsmanagement KW - Prozessanalytik KW - Prozesssicherheit KW - Sensoren KW - Statistik PY - 2010 DO - https://doi.org/10.1002/cite.200900137 SN - 0009-286X SN - 1522-2640 VL - 82 IS - 4 SP - 383 EP - 390 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-23054 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Process analytical applications of High Resolutiom On-Line NMR Spectroscopy T2 - Ruhr Universität Bochum, GDCh-Kolloquium CY - Bochum, Germany DA - 2010-10-18 PY - 2010 AN - OPUS4-22924 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Shokouhi, Parisa A1 - Niederleithinger, Ernst A1 - Zoëga, Andreas A1 - Barner, Andreas A1 - Schöne, Dieter T1 - Using Ultrasonic Coda Wave Interferometry for Monitoring Stress-Induced Changes in Concrete T2 - Symposium on Engineering and Environmental Geophysics (SAGEEP) CY - Keystone, CO, USA DA - 2010-04-11 PY - 2010 AN - OPUS4-21164 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert A1 - Niederleithinger, Ernst T1 - The NDT-CE test and validation site at BAM-TTS, Horstwalde T2 - Transportation Research Board (TRB) 89th Annual Meeting CY - Washington, D.C., USA DA - 2010-01-09 PY - 2010 AN - OPUS4-20899 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst A1 - Amir, J. M. A1 - Hübner, M. T1 - Crosshole Sonic Logging of Secant Pile Walls - A Feasibility Study T2 - Symposium on Engineering and Environmental Geophysics (SAGEEP) CY - Keystone, CO, USA DA - 2010-04-11 PY - 2010 AN - OPUS4-21165 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wunderlich, C. A1 - Fischer, J. A1 - Niederleithinger, Ernst A1 - Schallert, M. A1 - Klingmüller, O. T1 - Auswertung von Ringversuchen zur Vergleichbarkeit von Pfahlintegritätsprüfungen T2 - Fachtagung Bauwerksdiagnose CY - Berlin, Germany DA - 2010-02-18 PY - 2010 AN - OPUS4-20950 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Sebastian T1 - Herstellung und Verwendung metallischer zertifizierter Referenzmaterialien T2 - 17. Anwendertreffen Röntgenfluoreszenz- und Funkenemissionsspektrometrie CY - Dortmund, Germany DA - 2010-03-08 PY - 2010 AN - OPUS4-21162 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Recknagel, Sebastian A1 - Noack, Siegfried A1 - Steiger, Thomas A1 - Kipphardt, Heinrich A1 - Matschat, Ralf T1 - International comparability of determination of mass fractions of chromium, copper, iron, manganese and zinc in aluminium alloy: Comité consultatif pour la quantité de matière key comparison K42 N2 - The degree of equivalence within the participating national metrology institutes for the measurement results of the mass fractions of the analytes Cr, Cu, Fe, Mn and Zn in an aluminium alloy was assessed. This interlaboratory comité consultatif pour la quantité de matière key comparison (CCQM-K42) was organised as an activity of the Inorganic Analytical Working Group of CCQM. In total seven laboratories participated, six of them for all analytes. Measurands were the mass fractions of the analytes in a range of 0.05 and 0.2%. As an outcome the consistency of the results for all elements investigated was acceptable, hence satisfactory comparability was established. An aluminium based certified reference material—undisclosed to the analysts which one it was—was used as test sample. For the purpose of this study homogeneity was tested at BAM. Each laboratory was free to choose any analytical method they wanted to use for the analysis. Consequently various methods of measurement were employed: instrumental neutron activation analysis, X-ray fluorescence spectrometry (XRF) using fused cast-bead method combined with reconstitution technique, inductively coupled plasma optical emission spectrometry (ICP OES) and inductively coupled plasma mass spectrometry. Metrological traceability of the measurement results to the SI unit had to be demonstrated. Therefore, methods such as spark OES or XRF (without fused cast-bead technique)—both of them being most important methods for the analysis of metals and alloys in industrial laboratories—could not be used in the frame of the key comparison. KW - Aluminium alloy KW - International comparison KW - CCQM-K42 KW - Key comparison PY - 2010 DO - https://doi.org/10.1007/s00769-010-0641-5 SN - 0949-1775 SN - 1432-0517 VL - 15 IS - 7 SP - 401 EP - 407 PB - Springer CY - Berlin AN - OPUS4-21628 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst A1 - Amir, J. M. A1 - Hübner, M. T1 - Crosshole sonic logging of secant pile walls a feasibility study T2 - 23rd SAGEEP Symposium on the application of geophysics to engineering and environmental problems CY - Keystone, Colorado, USA DA - 2010-04-11 KW - Bohrpfahlwand KW - Pile wall KW - Ultraschallmethode KW - Cross-hole sonic logging PY - 2010 SN - 1554-8015 SP - 685 EP - 693 AN - OPUS4-21677 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Klingmüller, O. A1 - Schallert, M. A1 - Bobbe, A. ED - Petrukhin, V.P. ED - Ulitsky, V.M. ED - Kolybin, I.V. ED - Lisyuk, M.B. ED - Kholmyansky, M.L. T1 - Quality assurance of a secant pile wall using three different non-destructive test methods T2 - International geotechnical conference "Geotechnical challenges in megacities" CY - Moscow, Russia DA - 2010-06-07 KW - Bohrpfahlwand KW - Integritätsprüfung KW - Ultraschallmethode KW - Parallel Seismik KW - Pile wall KW - Integrity testing KW - Cross-hole sonic logging KW - Parallel seismics PY - 2010 SN - 978-5-9902005-2-4 VL - 3 SP - 1131 EP - 1136 PB - GRF AN - OPUS4-21620 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wunderlich, C. A1 - Fischer, J. A1 - Niederleithinger, Ernst A1 - Schallert, M. A1 - Klingmüller, O. T1 - Auswertung von Ringversuchen zur Vergleichbarkeit von Pfahlintegritätsprüfungen T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - Bohrpfähle KW - Ringversuch KW - Integritätsprüfung PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 SP - 1 EP - 8 CY - Berlin AN - OPUS4-20978 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosner, Martin A1 - Pritzkow, Wolfgang A1 - Vogl, Jochen T1 - Authentication of bell peppers using boron and strontium isotope compositions T2 - European Geosciences Union, General Assembly 2010 CY - Vienna, Austria DA - 2010-05-02 PY - 2010 AN - OPUS4-21541 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogl, Jochen A1 - Rosner, Martin A1 - Pritzkow, Wolfgang T1 - Development and validation of a single collector ICPMS procedure to determine boron isotopic compositions of water and food samples T2 - European Geosciences Union, General Assembly 2010 CY - Vienna, Austria DA - 2010-05-02 PY - 2010 AN - OPUS4-21565 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maack, Stefan T1 - Optimierte Verfahren zur zerstörungsfreien Analyse des Straßenkörpers T2 - Symposium Straßenmanagement CY - Erfurt, Germany DA - 2010-06-10 PY - 2010 AN - OPUS4-21474 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Linder, S. A1 - Paasche, H. A1 - Tronicke, J. A1 - Niederleithinger, Ernst A1 - Vienken, T. T1 - Zonal cooperative inversion of crosshole P-wave, S-wave, and georadar traveltime data sets N2 - In this study, we use and extend a recently developed zonal cooperative inversion approach and apply it to the inversion of three independent geophysical field data sets. We invert crosshole P-wave, S-wave, and georadar data sets acquired in sand and gravel dominated unconsolidated sediments to detect and characterize different sedimentary units relevant for an engineering or hydrological site characterization. The zonal cooperative inversion of the three traveltime data sets results in a single subsurface model, which is a geophysical three-parameter model (P-wave, S-wave, and georadar velocity) outlining the major subsurface zonation while explaining all input data sets. Comparing our zonal model to direct push (DP) logging data (tip resistance, sleeve friction, and dielectric permittivity) shows good agreement; i.e., the zones in our geophysical model largely correspond to major DP parameter changes. Furthermore, we demonstrate how the sparse DP data can be inter- and extrapolated to the entire tomographic plane which allows for further geotechnical and hydrological interpretations. This study illustrates that the zonal cooperative inversion approach is highly flexible and an excellent tool to characterize a variety of environments in terms of multiple physical parameters. KW - Seismic KW - Georadar KW - Direct push techniques KW - Crosshole tomography KW - Cooperative inversion KW - Site characterization PY - 2010 DO - https://doi.org/10.1016/j.jappgeo.2010.10.003 SN - 0926-9851 VL - 72 IS - 4 SP - 254 EP - 262 PB - Elsevier CY - Amsterdam [u.a.] AN - OPUS4-23266 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wienold, Julia A1 - Recknagel, Sebastian A1 - Rettschlag, N. A1 - Forstreuter, M. A1 - Jakubowski, Norbert T1 - Imaging of wood anatomy, making use of a laser ablation cell designed for large samples T2 - 10th European Workshop on Laser Ablation CY - Kiel, Germany DA - 2010-06-29 PY - 2010 AN - OPUS4-21786 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wienold, Julia A1 - Recknagel, Sebastian A1 - Forstreuter, M. T1 - Analyse von Buchenholzproben verschiedener Herkünfte mit Laser Ablation - ICP-MS T2 - 9. Symposium Massenspektrometrische Verfahren der Elementspurenanalyse, 22. ICP-MS Anwendertreffen CY - Berlin, Germany DA - 2010-09-06 PY - 2010 AN - OPUS4-21787 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Richter, Silke A1 - Recknagel, Sebastian A1 - Krivan, V. A1 - Jakubowski, Norbert T1 - Einsatz der ETV-ICP-MS Kopplung zur Charakterisierung von Spurenbestandteilen in refraktären Pulvermaterialien T2 - 9. Symposium Massenspektrometrische Verfahren der Elementspurenanalyse, 22. ICP-MS Anwendertreffen CY - Berlin, Germany DA - 2010-09-06 PY - 2010 AN - OPUS4-21788 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Tronicke, J. T1 - Travel-time inversion of parallel-seismic data for foundation length estimation T2 - Near Surface 2010 - 16th European Meeting of Environmental and Engineering Geophysics CY - Zurich, Switzerland DA - 2010-09-06 KW - Parallel Seismik KW - Fundamente KW - Pfähle KW - Inversion KW - Simulated annealing KW - Levenberg-Marquardt PY - 2010 SN - 978-90-73781-88-7 IS - P08 SP - 1 EP - 5 AN - OPUS4-22544 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst A1 - Müller, S. A1 - Krause, Martin A1 - Bohlen, T. T1 - Reverse Time Migration: A Seismic Imaging Technique Applied to Ultrasound Data T2 - NDE/NDT for Highway & Bridges: Structural Materials Technology (SMT) 2010 CY - New York City, NY, USA DA - 2010-08-16 PY - 2010 AN - OPUS4-21835 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst A1 - Tronicke, J. T1 - Traveltime inversion of parallel-seismic data for foundation lenght estimation T2 - EAGE Near Surface 2010 CY - Zurich, Switzerland DA - 2010-09-06 PY - 2010 AN - OPUS4-21920 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, S. A1 - Niederleithinger, Ernst A1 - Krause, Martin A1 - Bohlen, T. T1 - Anwendung der Reverse-Time-Migration auf Ultraschallmessungen an Beton in der zerstörungsfreien Prüfung T2 - 70. Jahrestagung der Deutschen Geophysikalischen Gesellschaft (DGG) CY - Bochum, Germany DA - 2010-03-15 PY - 2010 AN - OPUS4-22622 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jakubowski, Norbert A1 - Kipphardt, Heinrich A1 - Richter, Silke A1 - Dette, Angelika A1 - Recknagel, Sebastian A1 - Müller, Larissa T1 - Direct solid analysis ba LA- and ETV-ICP-OES/MS T2 - 4th Asia-Pacific Winter Conference on Spectrochemical Analysis CY - Beijing, China DA - 2010-12-01 PY - 2010 N1 - Geburtsname von Müller, Larissa: Wäntig, L. - Birth name of Müller, Larissa: Wäntig, L. AN - OPUS4-23239 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jakubowski, Norbert A1 - Kipphardt, Heinrich A1 - Richter, Silke A1 - Dette, Angelika A1 - Recknagel, Sebastian A1 - Müller, Larissa T1 - Direct solid analysis ba LA- and ETV-ICP-OES/MS T2 - FACSS Conference 2010 CY - Gaithersburg, MD, USA DA - 2010-10-22 PY - 2010 N1 - Geburtsname von Müller, Larissa: Wäntig, L. - Birth name of Müller, Larissa: Wäntig, L. AN - OPUS4-23237 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst A1 - Grandemenge, Julien A1 - Wilsch, Gerd T1 - Spatial clustering of LIBS data from concrete samples T2 - 6th International Conference on Laser-Induced Breakdown Spectroscopy CY - Memphis, TN, USA DA - 2010-09-13 PY - 2010 AN - OPUS4-22789 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kasparek, Eva Maria A1 - Scheidemann, Robert A1 - Zencker, Uwe A1 - Wolff, Dietmar A1 - Völzke, Holger T1 - Effect of dynamic loading on compressional behavior of damping concrete N2 - In drop test scenarios related to assessing and licensing the storage procedure of spent fuel and high active waste, the casks under examination are generally not equipped with impact limiters. Hence, the extent of mechanical stresses in case of an assumed handling accident is largely affected by the ground properties of the reception hall floor in the specific storage facility. Unlike conventional brittle foundation materials, damping concrete performs quite well in such applications as it features high stiffness as well as high energy absorption due to the filler pore volume. However, its damping ability is not sufficiently exploited in current finite element (FE) calculations due to a lack of advanced material models for simulating its impact response. An implementation of qualified concepts that account for plastic, strain rate dependent behavior requires additional information that has to be provided by systematic test series. BAM recently started a research project to generate such data, subsequently to develop and to improve numerical methods for the analysis of impact limiters and damping foundation material and thus to optimize safety assessment tools for the design of transport and storage casks. A major part of this research concerns dynamic compression tests of variably shaped specimens conducted at a servo hydraulic 1MN impact testing machine as well as at a BAM facility for guided drop tests. This presentation focuses 100mm damping concrete cubes deformed vertically at constant rates under different constraint conditions. For example, a special fitting jig was constructed to subject the specimens to multi-axial loading. Thereby a deformation of 60% could be applied. Simulation was conducted by FE code ABAQUS™ based on material models “Concrete damaged plasticity” and “Crushable foam” which both allow defining rate sensitive nonlinear stress-strain relations in compression beyond the classic metal plasticity approach. T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Damping concrete KW - Strain rate sensitivity KW - Numerical simulation KW - Material model PY - 2010 SP - 1-8 (Thursday-T40-114) AN - OPUS4-23708 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Änderungen im ADR 2011 Schwerpunkt: Prüfung von Verpackungen T2 - AK-Prüfstellen, BAM CY - Berlin, Germany DA - 2010-09-22 PY - 2010 AN - OPUS4-23724 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Änderungen im ADR 2011 Schwerpunkt: Verpackungen T2 - ERFA-Verpackungen, BAM CY - Berlin, Germany DA - 2010-07-07 PY - 2010 AN - OPUS4-23723 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg T1 - Fehleinschätzung der Betriebssicherheit von Composite-Druckbehältern durch Anwendung der Lastwechselanforderungen für Metallbehälter T2 - BAM-PTB-Kolloquium 2010 CY - Berlin, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-21506 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Regelwerke Gefahrgutverpackungen - wichtige Änderungen in 2011 T2 - Gefahrgutverpackungen in der Praxis - Schulung HDT E-H110-10-058-0, BAM CY - Berlin, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-23725 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Szczerba, Wojciech A1 - Riesemeier, Heinrich A1 - Thünemann, Andreas T1 - Bond length cntraction in gold nanoparticles N2 - The structure of nanoparticles typically differs from its bulk counterpart. Predominantly, the structures of gold nanoparticles have been under exceedingly intense discussion since the discovery of their high catalytic activity. We found an increasing bond length contraction with decreasing particle size for citrate-stabilized gold nanoparticles in aqueous solution as determined by in situ extended X-ray absorption fine structure (EXAFS) spectroscopy. Particle sizes and size distributions were determined by small-angle X-ray scattering. The analysis of the obtained EXAFS spectra employing ab initio calculations reveals that the Au–Au bond length undergoes a contraction of 2 pm for nanoparticles with a radius of 2.9 nm. NIST reference material RM 8011 gold nanoparticles with a radius of 4.4 nm exhibit a smaller contraction of approximately 1 pm. Finally, gold atoms in RM 8013 particles with a radius of 25.7 nm show distances of 288 pm— identical to the distance in gold foil—and exhibits bulk-like properties. The observed bond length contraction of gold nanoparticles in solution is significantly smaller than previously reported for gold nanoparticle deposited on surfaces, which is up to 15 pm. This indicates that the bond length contraction effect of 'free' and 'surfaceimmobilized' nanoparticles differ fundamentally. Such difference could be essential for the understanding of nanoparticle-supported catalysis. KW - Small-angle X-ray scattering KW - SAXS KW - EXAFS KW - XAFS KW - Nanoparticle KW - Gold PY - 2010 DO - https://doi.org/10.1007/s00216-010-4200-z SN - 1618-2642 SN - 1618-2650 VL - 398 IS - 5 SP - 1967 EP - 1972 PB - Springer CY - Berlin AN - OPUS4-22173 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaunich, Matthias A1 - von der Ehe, Kerstin A1 - Wolff, Dietmar A1 - Völzke, Holger A1 - Stark, Wolfgang T1 - Understanding the low temperature properties of rubber seals N2 - Rubbers are widely used as main sealing materials for containers for low and intermediate level radioactive waste and as additional component to metal seals in spent fuel and high active waste containers. The save encapsulation of the radioactive container inventory has to be guaranteed according to legislation and appropriate guidelines for long term storage periods as well as down to temperatures of -40 °C during transport. Therefore the understanding of failure mechanisms that lead to leakage at low temperatures is of high importance. It is known that the material properties of rubbers are strongly temperature dependent. At low temperatures this is caused by the rubber-glass transition (abbr. glass transition). During continuous cooling the material changes from rubber-like entropy-elastic to stiff energy-elastic behaviour, that allows nearly no strain or retraction, due to the glass transition. Hence rubbers are normally used above their glass transition but the minimum working temperature limit is not defined precisely, what can cause problems during application. Therefore the lower operation temperature limit of rubber seals should be determined in dependence of the material properties. The results of Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA) are combined with the results of standardized measurements as the compression set according to ISO 815. To reduce the test time of the standard tests a faster technique was developed. Additionally, the breakdown temperature of the sealing function of complete O-ring seals is measured in a component test setup to compare it with the results of the other tests. The experimental setup is capable of measuring the leakage rate at low temperatures by the pressure rise method. A fluorocarbon rubber (FKM) was selected for this investigation as it is often used for radioactive waste containers. Some materials (seals and test sheets) were purchased from a commercial seal producer and some materials were compounded and cured at BAM in form of rubber sheets. T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Dichtungen KW - Elastomere KW - Tieftemperaturverhalten PY - 2010 SP - 1 EP - 7 (Session T41 / Paper 169) AN - OPUS4-23887 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pulz, Robert A1 - Rehmer, Birgit T1 - Thermal shock behaviour of ceramics under different testing conditions N2 - Beside the presentation of interesting parts of the experimental equipment the thermal shock behaviour of two ceramics will be discussed. Specimens of silicon carbide and zirconia were investigated in air and vacuum. The influence of the testing conditions on the strength will be addressed. KW - Thermal shock KW - Ceramics KW - Different media PY - 2010 DO - https://doi.org/10.1088/1742-6596/240/1/012162 SN - 1742-6588 SN - 1742-6596 VL - 240 IS - 1 SP - 012162-1 - 012162-4 PB - IOP Publ. CY - Bristol, UK AN - OPUS4-22161 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kasparek, Eva Maria A1 - Zencker, Uwe A1 - Scheidemann, Robert A1 - Völzke, Holger T1 - Neural Networks for Parameter Identification of Dynamically Loaded Polyurethane Foams T2 - ECCM 2010 European Conference on Computational Mechanics CY - Paris, France DA - 2010-05-16 PY - 2010 AN - OPUS4-21371 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bletzer, Claus Wilhelm A1 - Zencker, Uwe A1 - Völzke, Holger A1 - Nehrig, Marko T1 - Strategie zur Bestimmung von Temperaturen von Transport- und Lagerbehältern für radioaktive Stoffe T2 - Jahrestagung Kerntechnik 2010 CY - Berlin, Germany DA - 2010-05-04 PY - 2010 AN - OPUS4-21320 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger T1 - Qualifikation von Behältern für das Endlager KONRAD T2 - 7. Expertentreffen Strahlenschutz CY - Lindau/Bodensee, Deutschland DA - 2010-03-03 KW - Behälter KW - Sicherheit KW - Endlager KW - Bauartprüfung KW - Radioaktive Abfälle PY - 2010 IS - Register 12 SP - 1 EP - 8 AN - OPUS4-21001 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Der Beitrag der BAM zur Sicherheitstechnik am Beispiel der Schadensanalyse von Eisenbahnenkomponenten T2 - Seminar im Fachbereich Maschinenbau/Sicherheitstechnik der Bergischen Universität Wuppertal CY - Wuppertal, Germany DA - 2010-06-07 PY - 2010 AN - OPUS4-21609 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger A1 - Noack, Volker A1 - Ellouz, Manel T1 - Topical Aspects of Waste Container Approval for the Upcoming KONRAD Repository T2 - Waste Management Symposia 2010 CY - Phoenix, AZ, USA DA - 2010-03-07 PY - 2010 AN - OPUS4-20994 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaunich, Matthias A1 - von der Ehe, Kerstin A1 - Wolff, Dietmar A1 - Völzke, Holger A1 - Stark, Wolfgang T1 - Understanding the low temperature properties of rubber seals T2 - PATRAM 2010 CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-21502 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pulz, Robert A1 - Rehmer, Birgit A1 - Skrotzki, Birgit T1 - Thermoschock - Interpretation von makroskopischen Bruchmerkmalen / Thermal shock - an interpretation of the macroscopic characteristics of fracture N2 - Der vorliegende Beitrag beschreibt typische Bruchmuster, die an SSiC Proben nach Thermoschockexperimenten beobachtet wurden und korreliert diese qualitativ mit der aufgebrachten Belastung. Der Thermoschock wird durch eine schnelle, in der Probenmitte beginnende spiralförmige Aufheizung dünner Scheiben mit Laserstrahlung realisiert. Durch diese Versuchsführung wandert ein zunehmender Temperaturgradient von der Mitte beginnend in radialer Richtung durch die Probe. Dieser Temperaturgradient ist für die Ausbildung von Druckspannungen im Probeninneren und Zugspannungen im kalten Randbereich der Probe verantwortlich. Beim Erreichen einer kritischen, versagensrelevanten Spannung tritt Probenbruch auf. Dabei wird die bis zu diesem Zeitpunkt in der Probe gespeicherte elastische Energie teilweise in die Schaffung von Rissoberflächen umgewandelt. Der Zusammenhang zwischen gespeicherter elastischer Energie und Bruchmuster wird dargestellt. KW - Thermoschock KW - Fraktographie KW - Elastische Energie KW - SSiC PY - 2010 DO - https://doi.org/10.3139/147.110081 SN - 0032-678X N1 - Sprachen: Deutsch/Englisch - Languages: German/English VL - 47 IS - 6 SP - 302 EP - 312 PB - Hanser CY - München AN - OPUS4-21515 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Der Beitrag der BAM zur Sicherheitstechnik am Beispiel der Schadensanalyse von Eisenbahnenkomponenten T2 - Seminar im Fachbereich Maschinenbau der Ruhr Universität Bochum CY - Bochum, Germany DA - 2010-06-16 PY - 2010 AN - OPUS4-21610 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Physical metallurgy of single crystalline nickel base superalloys T2 - AMT 2010, Plenary lecture CY - Zakopane, Poland DA - 2010-06-23 PY - 2010 AN - OPUS4-21611 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger A1 - Wolff, Dietmar A1 - von der Ehe, Kerstin A1 - Probst, Ulrich A1 - Schulz, Sebastian T1 - Topic investigations of cask metal seals and polymer components for long dry storage periods T2 - Institute of Nuclear Materials Management INMM 51st Annual Meeting CY - Baltimore, MD, USA DA - 2010-07-11 PY - 2010 AN - OPUS4-21765 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nies, Daniel A1 - Pulz, Robert A1 - Glaubitz, Steffen A1 - Finn, Monika A1 - Rehmer, Birgit A1 - Skrotzki, Birgit T1 - Testing Thermal Barrier Coatings by Laser Excitation T2 - Material Science and Engineering CY - Darmstadt, Germany DA - 2010-08-24 PY - 2010 AN - OPUS4-21890 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Schadensanalyse an Eisenbahnkomponenten T2 - 13. Internationale Metallographie-Tagung CY - Leoben, Austria DA - 2010-09-29 PY - 2010 AN - OPUS4-21931 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger A1 - Ellouz, Manel A1 - Noack, Volker T1 - Topical aspects of waste container approval for the upcoming KONRAD repository T2 - WM2010 - 36th Annual radioactive waste management symposium CY - Phoenix, Arizona, USA DA - 2010-03-07 KW - Behälter KW - Sicherheit KW - Endlager KW - Bauartprüfung KW - Radioaktive Abfälle PY - 2010 SN - 978-0-9828171-0-0 SP - 1 EP - 12(?) CY - Tempe, AZ, USA AN - OPUS4-21962 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Droste, Bernhard A1 - Wolff, Dietmar A1 - Völzke, Holger A1 - Wille, Frank T1 - Overview on long term storage of spent nuclear fuel and high active waste in transport casks in Germany T2 - Concultant Service Meeting "Working Group on the Evaluation of a Safety Case for the Cual Use Cask for Spent Nuclear Fuel", IAEA CY - Vienna, Austria DA - 2010-11-01 PY - 2010 AN - OPUS4-22262 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Völzke, Holger A1 - Wolff, Dietmar A1 - Probst, Ulrich T1 - Ageing Management for Long Term Interim Storage Casks T2 - PATRAM 2010, 16th International Symposium on the Packaging and Transport of Radioactive Materials CY - London, England DA - 2010-10-03 PY - 2010 AN - OPUS4-22227 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Noack, Volker A1 - Völzke, Holger A1 - Nieslony, Gregor A1 - Ellouz, Manel T1 - Beispiel eines experimentellen Nachweises der Eignung eines Stahlblechcontainers gemäß der Anforderungen des Endlagers Konrad T2 - Jahrestagung Kerntechnik 2010 CY - Berlin, Germany DA - 2010-05-04 PY - 2010 AN - OPUS4-22726 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger T1 - Behälterbegutachtung für die Zwishcenlagerung - Anforderungen - Erfahrungen - Perspektiven - T2 - 6. Symposium Lagerung und Transport radioaktiver Stoffe CY - Hanover, Germany DA - 2010-11-02 PY - 2010 AN - OPUS4-22240 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Scheuerlein, C. A1 - Ping, I. A1 - Senatore, C. A1 - Di Michiel, M. A1 - Thilly, L. A1 - Gerardin, A. A1 - Rehmer, Birgit A1 - Oberli, L. A1 - Willering, G. A1 - Bottura, L. T1 - Temperature induced degradation of Nb-Ti/Cu composite superconductors N2 - The degradation mechanisms of state-of-the-art Nb-Ti/Cu superconductors are described, based on in-situ synchrotron X-ray diffraction measurements during heat treatment. A quantitative description of the Nb-Ti/Cu degradation in terms of critical current density, Cu stabiliser resistivity and mechanical composite strength is presented. In an applied magnetic field a significant critical current degradation is already observed after a 5-minute 400 °C heat treatment, due to variations of –Ti precipitate size and distribution within the Nb-Ti alloy filaments. A strong degradation of the strand mechanical properties is observed after several minutes heating above 550 °C, which is also the temperature at which the formation of Cu-Ti intermetallic phases is detected. Several minutes heating at 250 °C are sufficient to increase the RRR of the strongly cold work strands inside a Rutherford type cable from about 80 to about 240. Heating for several minutes at 400 °C does not cause a significant conductor degradation in self-field and, thus, leaves enough temperature margin for the electrical interconnection of Nb-Ti/Cu conductors with common low temperature solders. KW - Supraleiter PY - 2010 DO - https://doi.org/10.1088/1742-6596/234/2/022031 SN - 1742-6588 SN - 1742-6596 VL - 234 IS - 2 SP - 022031-1 - 022031-5 PB - IOP Publ. CY - Bristol, UK AN - OPUS4-22618 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nies, Daniel A1 - Pulz, Robert A1 - Glaubitz, Steffen A1 - Finn, Monika A1 - Rehmer, Birgit A1 - Skrotzki, Birgit T1 - Testing of thermal barrier coatings by laser excitation N2 - Thermal barrier coatings (TBCs) are used to increase the operating temperature of land-, sea-, or air-based turbines. As failure of the coating may result in serious damage of the turbine, reliable estimation of the lifetime is essential. Most experiments to assess the lifetime or to determine parameters for simulations of the behavior of TBCs are done by burner-rig-tests, where the operating conditions are simulated by cyclic heating of the surface and cooling of the backside of a coated sample. In this work a possibility is presented to do comparable experiments by heating the surface with laser irradiation instead of a burner. For this purpose a Nd:YAG-laser with a maximum output power of 1?kW and a wavelength of 1064?nm is used. The laser spot can be moved by integrated optics across the sample surface to achieve homogeneous heating of the coating. Cooling of the backside is done by air. The temperature of the sample surface is determined by an infrared-camera which also enables the possibility to detect failures in the coating via thermography. Additionally, acoustic sensors attached to the sample holder are used to detect failures in the sample. The investigated ceramic material (yttria stabilized zirconia) has a very low absorption coefficient at the used laser wavelength. Therefore, a pre-treatment of the samples was needed to increase the absorption coefficient to be able to heat up the samples. In this paper, the experimental setup and first experimental results are presented. KW - Thermal barrier coating (TBC) KW - Yttria stabilized zirconia KW - Laser irradiation KW - Acoustic emission KW - Thermography PY - 2010 DO - https://doi.org/10.1002/adem.201000212 SN - 1438-1656 VL - 12 IS - 12 SP - 1224 EP - 1229 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-22896 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Epishin, Alexander A1 - Link, T. A1 - Klingelhöffer, Hellmuth A1 - Fedelich, Bernard A1 - Portella, Pedro Dolabella T1 - Creep damage of single-crystal nickel base superalloys: mechanisms and effect on low cycle fatigue N2 - The main mechanisms of creep damage of single-crystal nickel-base superalloys are the loss of the interface coherency, coarsening of the γ / γ'-microstructure, precipitation of topologically closed packed phases and growth of porosity. This degradation deteriorates the mechanical properties such as yield stress, creep lifetime and especially low-cycle fatigue life, which can be reduced nearly by a factor of 10. The degradation kinetics during creep was characterised quantitatively on the superalloy CMSX-4. A new non-destructive testing technique was applied to cover a wide test parameter range with few specimens in a relatively short time: repeated load annealing of wedge shaped specimens. KW - Creep damage KW - Nickel-base superalloys KW - Low-cycle fatigue KW - Rafting KW - Porosity KW - Prior exposure PY - 2010 DO - https://doi.org/10.3184/096034009X12603595726283 SN - 0960-3409 VL - 27 IS - 1 SP - 53 EP - 59 PB - Science Reviews CY - St. Albans, Herts. [u.a.] AN - OPUS4-23912 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zencker, Uwe A1 - Weber, Mike A1 - Qiao, Linan A1 - Droste, Bernhard A1 - Völzke, Holger T1 - Mechanical safety analyses of cast iron containers for the KONRAD repository N2 - Within the last years BAM has carried out numerous drop tests with prototype casks made of ductile cast iron onto targets according to the requirements for final disposal of non-heat generating waste in the German KONRAD repository. The results have shown that the target specifications in the acceptance criteria have to be defined more accurately to get reproducible test results with high precision. Hence, a suitable test stand foundation was developed with much effort. The integrity of the upper concrete layer of this target must be preserved during a test. Recently the geometrical properties of a tested cubic cast iron container led to a concentration of the impact forces beneath the container walls. The target was damaged strongly with the consequence of inadmissible reduction of cask stresses. For that reason the target construction was modified. However, the basic design was not changed. A prefabricated concrete slab was still joined by a mortar layer to the IAEA target of the BAM drop test facility. In the course of the optimization of the test stand foundation the concrete slab dimensions and the reinforcement were enlarged. During the drop test repetition the target kept intact. Additionally, the mechanical behavior of the cast iron container and the target was analyzed by finite element calculations. This improved target construction is suggested as a reference target for drop tests with casks whose mass and base area are covered by the container types VI or VII respectively according to the KONRAD repository acceptance criteria. The measurements during the drop tests with cast iron casks have provided the strains on the cask surface at selected positions. This allows the verification of finite element simulations of drop tests which show the stress distribution also inside the component. In September 2008 a drop test was carried out with a cylindrical cast iron cask containing an artificial material defect which was designed under consideration of critical stress states in the cask body. This drop test could demonstrate the safety against failure by fracture of a cask made of a special cast iron with reduced fracture toughness. T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Ductile iron KW - Container design KW - Safety assessment KW - Fracture mechanics KW - Dynamic loading conditions PY - 2010 SP - 1 EP - 8 (Session T28 / Paper 220) AN - OPUS4-23844 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Harrer, Andrea A1 - Nies, Daniel A1 - Pulz, Robert A1 - Röllig, Mathias A1 - Rehmer, Birgit T1 - Untersuchung von Transport- und Schädigungsprozessen in Keramiken und mineralischen Baustoffen mit lokal und global angeregter aktiver Thermografie N2 - In diesem Beitrag wird die Entwicklung eines aktiven Thermografieverfahrens zur zeit- und ortsaufgelösten in-situ und Echtzeit-Visualisierung von Transport- und Schädigungsprozessen für Anwendungen in Industrie und Umwelt vorgestellt. Das Verfahren ermöglicht unter Verwendung verschiedener thermischer Anregungsquellen u.a. die Bestimmung der thermischen Materialeigenschaften von Keramiken und trockenen und feuchten mineralischen Baustoffen. Schädigungsprozesse in Keramiken können in-situ visualisiert werden. Weiterhin werden Messergebnisse vorgestellt, die während des kapillaren Feuchtetransports in Naturstein erfasst wurden und diesen abbilden können. T2 - Sensoren und Messsysteme 2010 - 15. ITG/GMA-Fachtagung CY - Nürnberg, Deutschland DA - 2010-05-18 PY - 2010 SN - 978-3-8007-3260-9 IS - Paper 116 SP - 658 EP - 663 PB - VDE Verlag GmbH CY - Berlin, Offenbach AN - OPUS4-21949 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger T1 - Aktuelle Entwicklungen auf dem Gebiet der Behälterbegutachtung in atomrechtlichen Zwischen- und Endlagerverfahren T2 - 2. RAM Behältersicherheitstage 2010, BAM CY - Berlin, Germany DA - 2010-03-18 PY - 2010 AN - OPUS4-20964 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Der Beitrag der BAM zur Sicherheitstechnik am Beispiel der Schadensanalyse von Eisenbahnkomponenten T2 - Seminar im Fachbereich Maschinenbau/Sicherheitstechnik der Bergischen Universität Wuppertal CY - Wuppertal, Germany DA - 2010-06-07 PY - 2010 AN - OPUS4-20404 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger T1 - Qualifikation von Behältern für das Endlager Konrad T2 - 7. Expertentreffen Strahlenschutz; TÜV SÜD CY - Lindau, Germany DA - 2010-03-03 PY - 2010 AN - OPUS4-20971 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Völzke, Holger T1 - Countdown für Konrad KW - Endlager KW - Radioaktive Stoffe KW - Behälter KW - Bauartprüfung KW - Sicherheit PY - 2010 SN - 0016-5808 VL - 2 SP - 28 EP - 31 PB - Storck CY - Hamburg AN - OPUS4-20914 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kipphardt, Heinrich A1 - Matschat, Ralf A1 - Vogl, Jochen A1 - Gusarova, Tamara A1 - Czerwensky, Michael A1 - Heinrich, Hans-Joachim A1 - Hioki, A. A1 - Konopelko, L.A. A1 - Methven, B. A1 - Miura, T. A1 - Petersen, O. A1 - Riebe, Gundel A1 - Sturgeon, R. A1 - Turk, G.C. A1 - Yu, L. L. T1 - Purity determination as needed for the realisation of primary standards for elemental determination: status of international comparability N2 - Within the National Metrology Institutes (NMIs) and designated laboratories, an interlaboratory comparison, CCQM-P107, was conducted to verify the degree of international comparability concerning the results of purity analysis. The mass fractions of Ag, Bi, Cd, Cr, Ni, Tl at the lower mg/kg-level in a high purity zinc material were determined, but the real measurand in metrological sense was the sum of the six mass fractions. Homogeneity was investigated by glow discharge mass spectrometry, reference values were obtained using isotope dilution mass spectrometry. Six NMIs participated, contributing eight independent data sets. The agreement amongst the results of the participants, their median and the agreement with the reference values were usually excellent and in almost all cases below the target uncertainty of 30% relative. In this manner, the accuracy of results and the comparability between the participants was demonstrated to be established. KW - Interlaboratory comparison KW - Purity analysis KW - High purity metals KW - CCQM-P107 KW - Zinc PY - 2010 DO - https://doi.org/10.1007/s00769-009-0557-0 SN - 0949-1775 SN - 1432-0517 VL - 15 IS - 1 SP - 29 EP - 37 PB - Springer CY - Berlin AN - OPUS4-20767 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vogl, Jochen A1 - Pritzkow, Wolfgang T1 - Isotope dilution mass spectrometry - a primary method of measurement and its role for RM certification KW - IDMS KW - Reference materials KW - Metrology KW - ICPMS KW - TIMS PY - 2010 SN - 0970-3950 VL - 25 IS - 3 SP - 135 EP - 164 PB - Metrology Society of India CY - New Delhi AN - OPUS4-22603 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Vogl, Jochen A1 - Becker, Dorit A1 - Koenig, Maren A1 - Rosner, M. T1 - Certification report for the reference materials ERM-AE102a, -AE104a, -AE120, -AE121 and -AE122 N2 - Isotope reference materials are essential to enable reliable and comparable isotope data. Besides the correction of mass fractionation or mass discrimination isotope reference materials are indispensible for validation and quality control of analytical procedures. This article describes the production and certification of a set of five isotope reference materials ERM-AE102a, 104a, AE120, 121 and 122, for boron isotope analysis. The isotopic composition of all materials has been adjusted by mixing boron mother solutions enriched in 10B or 11B with a boron mother solution having natural-like isotopic composition under full gravimetric control. All mother solutions have been analysed for their boron mass fraction as well as their boron isotopic composition by TIMS using IDMS as calibration technique. For all five reference materials the isotopic composition obtained on the basis of the gravimetric data agrees very well with the isotopic composition obtained from different TIMS techniques. Performed stability and homogeneity studies show no significant influence on the isotopic composition as well as on the related uncertainties. The certified isotope abundances for 10B are 0.29995 (27) for ERM-AE102a and 0.31488 (28) for ERM-AE104a. The certified δ11B values are -20.2 (6) ‰ for ERM-AE120, 19.9(6) ‰ for ERM-AE121 and 39.7 (6) ‰ for ERM-AE122. Together with the formerly certified ERM-AE101 and -AE103 a unique set of seven certified reference materials (CRM) for boron isotope analysis is now available from BAM. KW - Boron KW - Delta value KW - Isotope ratio KW - ICPMS KW - TIMS PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-355813 SP - 1 EP - 24 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-35581 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dey, Anika A1 - Casperson, Ralf A1 - Pohl, Rainer A1 - Thomas, Hans-Martin T1 - Die Wirbelstromprüfung als Hilfsmittel für die Schieneninstandhaltung N2 - Die zerstörungsfreie Oberflächenprüfung an verlegten Eisenbahnschienen mit Wirbelstrom hat in den letzten Jahren durch ständige Weiterentwicklung und Verifizierung enorm an Bedeutung gewonnen. Es wurde u.a. angestrebt zuverlässige Planungsgrößen für den Einsatz von Instandhaltungsmaßnahmen zu erhalten, durch deren gezielten Einsatz Risswachstum unterbunden werden kann. Die Ursache für das Wachstum von Rissen in der Schiene liegt in der Materialermüdung des Werkstoffes infolge der Betriebsbelastungen im RadSchiene-Kontakt. Nach einer gewissen Beanspruchungsdauer kommt es an den Kontaktflächen der Fahrkante zu einer Kaltverfestigung des Schienenstahls. Durch fortschreitende Verfestigung des kontaktbeanspruchten Oberflächenbereichs der gehärteten Schicht wird der Werkstoff spröde und es bilden sich feine Risse aus. Die Risse wachsen anfangs unter einem flachen Winkel in das Schieneninnere hinein, neigen dann aber ab einem gewissen Stadium dazu in das Innere des Schienenkopfes abzukippen, was im Extremfall zu einem Schienenbruch führen kann. Diese Rollkontaktermüdungsrisse, auch genannt Head Checks, entstehen bevorzugt in der Fahrkante von bogenäußeren Schienen. Die Anwendung der Wirbelstromprüfung an der Schiene wurde bisher zur Ermittlung der Schädigungstiefe dieser Rollkontaktermüdungsrisse eingesetzt. Das Wirbelstromverfahren besitzt die Eigenschaft, sehr empfindlich auf alle Veränderungen der Materialeigenschaften an der Oberfläche zu reagieren. Daher wurde festgestellt, dass sich neben der Detektion von Rissen auch Fehler wie Eindrückungen oder Schlupfwellen, bis hin zu Materialveränderungen durch Schweißen oder Aufhärtungen in der Schienenoberfläche bestimmen lassen. Die Wirbelstromprüfung besitzt daher das Potenzial, mögliche Orte der Entstehung von Ermüdungsrissen in einem extrem frühzeitigen Stadium nachzuweisen. Ziel ist es, die rissgefährdeten Zonen schon im Zustand der Kaltverfestigung zu identifizieren. Dadurch können sich neue Aspekte für die präventive Schieneninstandhaltung ergeben. T2 - DGZfP-Jahrestagung 2010 - Zerstörungsfreie Materialprüfung ZfP in Forschung, Entwicklung und Anwendung CY - Erfurt, Germany DA - 10.05.2010 PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-214813 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) CY - Berlin AN - OPUS4-21481 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kraehnert, R. A1 - Polte, Jörg A1 - Erler, Robert A1 - Thünemann, Andreas A1 - Emmerling, Franziska A1 - Ahner, T. T. A1 - Sokolov, S. A1 - Ortel, Erik T1 - Size-controlled synthesis of gold-nanoparticles for catalytic applications followed by in-situ SAXS, XANES and UV/Vis T2 - Deutsche Tagung für Forschung mit Synchrotronstrahlung, Neutronen und Ionenstrahlen an Großgeräten CY - Berlin, Germany DA - 2010-02-24 PY - 2010 AN - OPUS4-20176 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thünemann, Andreas A1 - Knappe, Patrick A1 - Bienert, Ralf A1 - Weidner, Steffen T1 - In Situ Characterization of Superparamagnetic Nanoparticles: Online Coupling of FFF and SAXS using Synchrotron Radiation T2 - Workshop on structural aspects of biocompatible ferrofluids: stabilization, properties control and application CY - Geesthacht, Germany DA - 2010-01-28 PY - 2010 AN - OPUS4-20100 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Polte, Jörg A1 - Erler, Robert A1 - Simo, A. A1 - Fischer, A. A1 - Rademann, K. A1 - Kraehnert, R. A1 - Thünemann, Andreas A1 - Emmerling, Franziska A1 - Tuaev, Xenia T1 - Small angle X-Ray scattering as an universal tool for nucleation and growth studies T2 - Deutsche Tagung für Forschung mit Synchrotronstrahlung, Neutronen und Ionenstrahlen an Großgeräten CY - Berlin, Germany DA - 2010-02-24 PY - 2010 AN - OPUS4-20177 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erler, Robert A1 - Polte, Jörg A1 - Kraehnert, R. A1 - Thünemann, Andreas A1 - Emmerling, Franziska T1 - In situ Analyse des Wachstumsprozesses von Palladiumnanopartikeln mit Röntgenkleinwinkelstreuung um Millisekundenbereich T2 - Deutsche Tagung für Forschung mit Synchrotronstrahlung, Neutronen und Ionenstrahlen an Großgeräten CY - Berlin, Germany DA - 2010-02-24 PY - 2010 AN - OPUS4-20179 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Khare, V. A1 - Li, Z. A1 - Mantion, Alexandre A1 - Ayi, A. A. A1 - Sonkaria, S. A1 - Voelkl, A. A1 - Thünemann, Andreas A1 - Taubert, A. T1 - Strong anion effects on gold nanoparticle formation in ionic liquids N2 - Ionic liquids (ILs) have attracted tremendous interest in the recent past for their potential in many chemical fields. The current report explores the effects of a set of ILs based on the 1-ethyl-3-methyl-imidazolium cation and different anions on the formation of gold nanoparticles. X-Ray diffraction finds face-centered cubic gold in all cases, but transmission electron microscopy (TEM) shows that there are distinct differences in particle formation and stabilization with the ethyl sulfate (ES), trifluoromethanesulfonate (TfO) and methanesulfonate (MS) anions. With the MS anion, nanoparticles with diameters between 5 and 7 nm form, which increasingly aggregate at higher reaction temperatures. With TfO, also small 5 to 7 nm particles form, but only at low temperatures. Above ca. 160 °C, large, ill-defined and aggregated particles form. With ES, polydisperse samples form at all temperatures except 160 °C. In this case the nanoparticles appear often surrounded by an IL film, which appears to stabilize individual, ca. 15 to 20 nm particles. Dynamic light scattering and UV/Vis spectroscopy further show that in suspension the particles are, much like seen in the TEM, more strongly aggregated with higher reaction temperatures. In summary, the results suggest that there are very specific IL-gold interactions that are responsible for the formation of gold particles with an IL-specific shape, size, and aggregation behavior. KW - Ionic liquid templating KW - Gold nanoparticle KW - Ionic liquid PY - 2010 DO - https://doi.org/10.1039/b917467b SN - 0959-9428 SN - 1364-5501 VL - 20 SP - 1332 EP - 1339 PB - Royal Society of Chemistry CY - Cambridge AN - OPUS4-20872 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Haase, A. A1 - Graf, P. A1 - Mantion, Alexandre A1 - Plendl, J. A1 - Goetz, M. E. A1 - Thünemann, Andreas A1 - Luch, A. T1 - Cytotoxicity of silver nanoparticles in human macrophages and its link to oxidative stress and functional impairment T2 - Second NanoImpactNet Conference: For a healthy environment in a future with nanotechnology CY - Lausanne, Switzerland DA - 2010-03-09 PY - 2010 AN - OPUS4-20780 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tuaev, Xenia A1 - Erler, Robert A1 - Thünemann, Andreas A1 - Emmerling, Franziska T1 - In situ Analytik von Nukleations- und Wachstumsprozessen von Silbernanopartikeln am offenen Flüssigkeitsstrahl mittels Röntgenkleinwinkelstreuung T2 - Deutsche Tagung für Forschung mit Synchrotronstrahlung, Neutronen und Ionenstrahlen an Großgeräten CY - Berlin, Germany DA - 2010-02-24 PY - 2010 AN - OPUS4-20180 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niehoff, A. A1 - Mantion, Alexandre A1 - Thünemann, Andreas A1 - McAloney, R. A1 - Goh, C. M. A1 - Winnik, M. A. A1 - Menzel, H. T1 - Synthesis and gel formation of well-defined PBLG-based rod-coil block copolymers T2 - Macromolekulares Kolloquium CY - Freiburg, Germany DA - 2010-02-25 PY - 2010 AN - OPUS4-20866 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mantion, Alexandre A1 - Graf, P. A1 - Thünemann, Andreas A1 - Taubert, A. T1 - Peptide-coated silver as new building blocks for the creation of photonic crystals T2 - Photonic Materials PHONA Worshop CY - Jena, Germany DA - 2010-03-24 PY - 2010 AN - OPUS4-21036 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Klimakow, Maria A1 - Klobes, Peter A1 - Thünemann, Andreas A1 - Rademann, K. A1 - Emmerling, Franziska T1 - Mechanochemical synthesis of metal-organic frameworks: A fast and facile approach toward quantitative yields and high specific surface areas N2 - The strategy of utilizing mechanochemical synthesis to obtain metal–organic frameworks (MOFs) with high surface areas is demonstrated for two model systems. The compounds HKUST-1 (Cu3(BTC)2, BTC = 1,3,5-benzenetricarboxylate) and MOF-14 (Cu3(BTB)2, BTB = 4,4',4''-benzenetribenzoate) were synthesized by ball milling and characterized by powder X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM) and thermal analysis (DTA/DTG/MS). The specific surface area (SSA) of both compounds was characterized by nitrogen adsorption. To verify these results and to understand how the synthetic conditions influence the pore structure and the surface area, additional small-angle X-ray scattering (SAXS) experiments were carried out. Our investigations confirm that this synthesis approach is a promising alternative method for distinct MOFs. This facile method leads to materials with surface areas of 1713 m²/g, which is comparable to the highest given values in the literature for the respective compounds. KW - Metal-organic frameworks KW - Mechanochemistry KW - Green-chemistry synthesis KW - Gas adsorption KW - SAXS KW - Specific surface area PY - 2010 DO - https://doi.org/10.1021/cm1012119 SN - 0897-4756 SN - 1520-5002 VL - 22 IS - 18 SP - 5216 EP - 5221 PB - American Chemical Society CY - Washington, DC AN - OPUS4-21999 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Poyraz, Ö. A1 - Schmidt, H. A1 - Seidel, K. A1 - Delißen, Friedmar A1 - Ader, C. A1 - Tenenboim, H. A1 - Goosmann, C. A1 - Laube, B. A1 - Thünemann, Andreas A1 - Zychlinsky, A. A1 - Baldus, M. A1 - Lange, A. A1 - Griesinger, C. A1 - Kolbe, M. T1 - Protein refolding is required for assembly of the type three secretion needle N2 - Pathogenic Gram-negative bacteria use a type three secretion system (TTSS) to deliver virulence factors into host cells. Although the order in which proteins incorporate into the growing TTSS is well described, the underlying assembly mechanisms are still unclear. Here we show that the TTSS needle protomer refolds spontaneously to extend the needle from the distal end. We developed a functional mutant of the needle protomer from Shigella flexneri and Salmonella typhimurium to study its assembly in vitro. We show that the protomer partially refolds from α-helix into β-strand conformation to form the TTSS needle. Reconstitution experiments show that needle growth does not require ATP. Thus, like the structurally related flagellar systems, the needle elongates by subunit polymerization at the distal end but requires protomer refolding. Our studies provide a starting point to understand the molecular assembly mechanisms and the structure of the TTSS at atomic level. PY - 2010 DO - https://doi.org/10.1038/nsmb.1822 SN - 1545-9993 SN - 1545-9985 VL - 17 SP - 788 EP - 792 PB - Nature Publ. Comp. CY - New York, NY, USA AN - OPUS4-21726 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Graf, P. A1 - Mantion, Alexandre A1 - Haase, A. A1 - Thünemann, Andreas A1 - Masic, A. A1 - Luch, A. A1 - Taubert, A. T1 - Silicification of peptide-coated chiral nanosilver: Novel core-shell structures N2 - Nanosilver is increasingly used in optics, medicine and analytical chemistry. We recently reported on the synthesis and properties of novel peptide-coated chiral nanosilver [1] using a small hexapeptide based on the amino acids CKK. In a continuation of our previous work, we use the peptides to catalyse TEOS hydrolysis in order to form a dense silica layer shell around a single nanoparticle, preventing chemical etching, allowing their inclusion in other inorganics, and making them biocompatible. Because of mild reaction conditions, the peptide integrity is ensured, as the chiral information which is contained in the nanoparticle. Moreover, these novel core-shell structures remain well-dispersed and are biocompatible. The possibility of further processing (creation of metamaterials etc.) is also in the focus of our interest. KW - Hybrid materials KW - Nanosilver KW - Core shell PY - 2010 DO - https://doi.org/10.1002/zaac.201009133 SN - 0044-2313 SN - 1521-3749 SN - 0372-7874 SN - 0863-1786 SN - 0863-1778 VL - 636 IS - 11 SP - 2115 PB - Wiley-VCH CY - Weinheim AN - OPUS4-22409 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Knappe, Patrick A1 - Bienert, Ralf A1 - Weidner, Steffen A1 - Thünemann, Andreas T1 - Poly(acrylic acid): A combined analysis with field-flow fractionation and SAXS N2 - Polyelectrolytes such as PAA and its salts are widely used, but are notoriously difficult to characterize due to their polyelectrolyte properties and broad molecular mass distributions. In this paper, we report on a new PAA analysis by combining asymmetrical flow field-flow fractionation and an advanced SAXS technique using an acoustic levitator to minimize background scattering. The proof-of-principle is demonstrated with a mixture of three standard PAAs with different molecular masses. Detailed information on the PAA fractions is available on radii of gyration, polymer contour lengths, and coil conformation. Our method is expected to be applicable for a wide range of water-soluble synthetic and natural polymers and ideal for molecular masses of 5 × 103–2 × 105 g · mol-1. KW - Fractionation of polymers KW - Molar mass distribution KW - Polyelectrolytes KW - Small-angle X-ray scattering KW - Water-soluble polymers PY - 2010 DO - https://doi.org/10.1002/macp.201000163 SN - 1022-1352 SN - 1521-3935 VL - 211 IS - 19 SP - 2148 EP - 2153 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-22005 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Haase, A. A1 - Mantion, Alexandre A1 - Thünemann, Andreas A1 - Luch, A. A1 - Arlinghaus, H. F. A1 - Tentschert, J. A1 - Draude, F. A1 - Jungnickel, H. A1 - Plendl, J. T1 - Cytotoxicity of silver nanoparticles in human macrophages: Link to oxidative stress, alteration in membrane lipid composition and functional impairment T2 - Grenoble Nanosafe CY - Grenoble, France DA - 2010-11-16 PY - 2010 AN - OPUS4-21794 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Haase, A. A1 - Mantion, Alexandre A1 - Thünemann, Andreas A1 - Taubert, Annette A1 - Luch, A. A1 - Meier, W. A1 - Rott, S. A1 - Reiser, G. T1 - Effects of silver nanoparticles in primary mixed neural cultures: Oxidative stress and interference with calcium signalling T2 - Neurorepair 2010 CY - Warnemünde, Germany DA - 2010-10-01 PY - 2010 AN - OPUS4-21821 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tentschert, J. A1 - Mantion, Alexandre A1 - Haase, A. A1 - Thünemann, Andreas A1 - Taubert, Annette A1 - Luch, A. A1 - Jungnickel, H. T1 - TOF-SIMS analysis of cell membrane changes in functional impaired human macrophages after nanosilver treatment T2 - SIMS Europe 2010 CY - Münster, Germany DA - 2010-10-19 PY - 2010 AN - OPUS4-21820 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knappe, Patrick A1 - Weidner, Steffen A1 - Thünemann, Andreas T1 - A4F-SAXS Online Coupling in-situ Nanoparticles Analysis T2 - BfR-Seminar zum Thema Nanotoxikologie, Bundesinstitut für Risikobewertung CY - Berlin, Germany DA - 2010-08-04 PY - 2010 AN - OPUS4-21795 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knappe, Patrick A1 - Weidner, Steffen A1 - Thünemann, Andreas T1 - A4F-SAXS Online Coupling - In-situ Nanoparticle Analysis T2 - BfR-Seminar zum Thema Nanotoxikologie CY - Berlin, Germany DA - 2010-08-04 PY - 2010 AN - OPUS4-21937 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Haase, A. A1 - Tentschert, J. A1 - Graf, P. A1 - Mantion, Alexandre A1 - Draude, F. A1 - Jungnickel, H. A1 - Plendl, J. A1 - Goetz, M. E. A1 - Arlinghaus, H. F. A1 - Thünemann, Andreas A1 - Luch, A. T1 - Cytotoxicity of silver nanoparticles in human macrophages: link to oxidative stress, alteration in membrane lipid composition and cellular impaiment T2 - Post-satelitte Meeting Eurotox 2009 CY - Dresden, Germany DA - 2010-04-23 PY - 2010 AN - OPUS4-21247 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhmert, L. A1 - Niemann, B. A1 - Mantion, Alexandre A1 - Graf, P. A1 - Thünemann, Andreas A1 - Taubert, A. A1 - Lampen, A. T1 - Cytotoxicity of peptide-coated silver nanoparticles in the human intestinal cell line Caco-2 T2 - Post-satellite Meeting Eurotox 2009 CY - Dresden, Germany DA - 2010-04-23 PY - 2010 AN - OPUS4-21074 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mantion, Alexandre A1 - Haase, A. A1 - Graf, P. A1 - Plendl, J. A1 - Goetz, M. E. A1 - Thünemann, Andreas A1 - Luch, A. T1 - Cytotoxicity of model silver nanoparticles in human macrophages T2 - Post-satellite Meeting Eurotox 2009 CY - Dresden, Germany DA - 2010-04-23 PY - 2010 AN - OPUS4-21038 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Szczerba, Wojciech A1 - Radtke, Martin A1 - Riesemeier, Heinrich A1 - Reinholz, Uwe A1 - Thünemann, Andreas T1 - EXAFS study of Au-Au bond length in gold nanoparticle standards T2 - European Conference on X-ray Spectrometry CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-21204 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fenger, R. L. A1 - Freund, H.-J. A1 - Thünemann, Andreas A1 - Rademann, K. T1 - Size Dependent Catalytic Investigation of Gold Nanoparticles T2 - 3rd EuChemMS European Chemistry Congress 2010 CY - Nuremberg, Germany DA - 2010-08-29 PY - 2010 AN - OPUS4-21101 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mantion, Alexandre A1 - Haase, A. A1 - Graf, P. A1 - Plendl, J. A1 - Thünemann, Andreas A1 - Luch, A. T1 - Cytotoxicity of model silver nanoparticles in human macrophages T2 - Nanotoxicology 2010 CY - Edinburgh, Scotland DA - 2010-06-02 PY - 2010 AN - OPUS4-21037 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nehring, R. A1 - Palivan, C.G. A1 - Moreno-Flores, S. A1 - Mantion, Alexandre A1 - Tanner, P. A1 - Toca-Herrera, J.L. A1 - Thünemann, Andreas A1 - Meier, W. T1 - Protein decorated membranes by specific molecular interactions N2 - Here we characterize new metal-functionalized amphiphilic diblock copolymers, developed for both surface and solution molecular recognition applications. Polybutadiene-block-poly(ethylene oxide) copolymers functionalized with nitrilotriacetic acid and tris(nitrilotriacetic acid) were complexed with nickel(II) to obtain coordination sites for oligohistidine residues of model proteins. Mixtures of functionalized polymers with the respective non-functionalized block copolymers self-assemble in aqueous solution into vesicular structures with a controlled density of the metal end-groups on their surface. In solution, binding of His6-tagged green fluorescent protein (EGFP) and red fluorescent protein (RFP) to the vesicle surface was quantified by fluorescence correlation spectroscopy. Small-angle X-ray scattering indicates an increase of the membrane thickness by 2-3 nm upon protein binding. Block copolymer monolayers at the air-water interface and on solid support served as a model system to characterize the protein-decorated membranes by Brewster angle microscopy and AFM. High resolution AFM of solid-supported, hydrated monolayers indicates that the proteins form densely packed and partially ordered arrays with the cylindrically shaped EGFP molecules lying flat on the surface of the films. KW - Amphiphilic copolymer KW - Metal centers KW - His-tag proteins KW - Molecular recognition PY - 2010 DO - https://doi.org/10.1039/c002838j SN - 1744-683X VL - 6 SP - 2815 EP - 2824 PB - RSC Publ. CY - Cambridge AN - OPUS4-21564 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Khare, V. A1 - Kraupner, A. A1 - Mantion, Alexandre A1 - Jelicic, A. A1 - Thünemann, Andreas A1 - Giordano, C. A1 - Taubert, A. T1 - Stable iron carbide nanoparticle dispersions in [Emim][SCN] and [Emim][N(CN)2] ionic liquids N2 - Dispersions of Fe3C nanoparticles in several ionic liquids (ILs) have been investigated. The ILs are based on 1-ethyl-3-methylimidazolium [Emim] and 1-butyl-3-methylimidazolium [Bmim] cations. Anions are ethylsulfate [ES], methanesulfonate [MS], trifluoromethylsulfonate (triflate) [TfO], tetrafluoroborate [BF4], dicyanamide [N(CN)2], and thiocyanate [SCN]. Among the ILs studied, [Emim][SCN] and [Emim][N(CN)2] stand out because only in these ILs have stable and transparent nanoparticle dispersions been obtained. All other ILs lead to blackish, slightly turbid dispersions or to completely nontransparent suspensions, which often contain undispersed sediment. UV/vis spectroscopy, transmission electron microscopy, and X-ray scattering suggest that the reason for the stabilization of the Fe3C nanoparticles in [Emim][SCN] is the leaching of traces of iron from the particles (without affecting the crystal structure of the Fe3C particles). The resulting particle surface is thus carbon-rich, which presumably favors the stabilization of the particles. A similar explanation can be postulated for [Emim][N(CN)2], with the dicyanamide anion also being a good ligand for iron. KW - Ionic liquid KW - Iron carbide PY - 2010 DO - https://doi.org/10.1021/la100775m SN - 0743-7463 SN - 1520-5827 VL - 26 IS - 13 SP - 10600 EP - 10605 PB - American Chemical Society CY - Washington, DC AN - OPUS4-21624 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Haase, A. A1 - Tentschert, J. A1 - Jungnickel, H. A1 - Graf, P. A1 - Mantion, Alexandre A1 - Draude, F. A1 - Plendl, J. A1 - Goetz, M. E. A1 - Thünemann, Andreas A1 - Taubert, A. A1 - Arlinghaus, H. F. A1 - Luch, A. T1 - Cytotoxicity of silver nanoparticles in human macrophages: Link to oxidative stress, alteration in membrane lipid composition and functional impaiment T2 - Golm International Symposium Bioactive Surfaces CY - Potsdam, Germany DA - 2010-05-20 PY - 2010 AN - OPUS4-21249 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knappe, Patrick A1 - Boehmert, L. A1 - Karmutzki, S. A1 - Niemann, B. A1 - Bienert, Ralf A1 - Weidner, Steffen A1 - Thünemann, Andreas A1 - Lampen, A. T1 - Fractionation and Analysis of Iron Oxide Nanoparticles by A4F-SAXS Coupling and Testing their Cytotoxicity on Caco-2-Cells T2 - Golm International Symposium on Bioactive Surfaces CY - Potsdam, Germany DA - 2010-05-20 PY - 2010 AN - OPUS4-21279 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mantion, Alexandre A1 - Thünemann, Andreas A1 - Haase, A. A1 - Tentschert, J. A1 - Graf, P. A1 - Draude, F. A1 - Jungnickel, H. A1 - Plendl, J. A1 - Arlinghaus, H. F. T1 - Cytotoxity of silver nanoparticles in human macrophages: Link to oxidative stress, alteration in membrane lipid composition and functional impairment T2 - E-MRS Meeting CY - Strasbourg, France DA - 2010-06-07 PY - 2010 AN - OPUS4-21403 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mantion, Alexandre A1 - Haase, A. A1 - Graf, P. A1 - Plendl, J. A1 - Goetz, M. E. A1 - Luch, A. A1 - Taubert, A. A1 - Thünemann, Andreas T1 - New silver nanoparticles with tailored bioactive surface properties as a model for toxicological investigations T2 - Golm International Symposium Bioactive Surfaces CY - Potsdam, Germany DA - 2010-05-20 PY - 2010 AN - OPUS4-21248 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Taubert, A. A1 - Mantion, Alexandre A1 - Thünemann, Andreas A1 - Graf, P. A1 - Haase, A. A1 - Plendl, J. A1 - Goetz, M. E. A1 - Luch, A. T1 - New silver nanoparticles with tailored bioactive surface properties as a model for toxicologial T2 - E-MRS Meeting CY - Strasbourg, France DA - 2010-06-07 PY - 2010 AN - OPUS4-21377 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Delißen, Friedmar A1 - Polte, Jörg A1 - Bienert, Ralf A1 - Emmerling, Franziska A1 - Thünemann, Andreas T1 - Contactless investigation of biological material at the nanoscale T2 - Nanoformulation 2010 CY - Stockholm, Sweden DA - 2010-06-09 PY - 2010 AN - OPUS4-21473 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Scherer, Christian A1 - Utech, S. A1 - Scholz, S. A1 - Noskov, S. A1 - Kindervater, P. A1 - Graf, R. A1 - Thünemann, Andreas A1 - Maskos, Michael T1 - Synthesis, characterization and fine-tuning of bimodal poly(organosiloxane) nanoparticles N2 - The acid catalyzed sol–gel type synthesis of polyorganosiloxane core-shell nanoparticles with removable PDMS core in aqueous dispersion leads to the inherent formation of a bimodal size distribution with smaller spheres having approximately 26 nm radii and larger nanoparticles with 60 nm in radius. The origin of the self-organized bimodality is investigated and finally attributed to a combination of stabilization of the growing particles due to i) a miniemulsion-type stabilization by the ultrahydrophobe PDMS and ii) by surface co-stabilization by the employed surfactant. The significant influence of temperature, pH, stirrer speed and amount of the surfactant on the particle sizes allows for the design and fine-tuning of different nanoparticles sizes and distributions. KW - Nanoparticles KW - Polyorganosiloxane KW - Field-flow fractionation (FFF) PY - 2010 DO - https://doi.org/10.1016/j.polymer.2010.09.065 SN - 0032-3861 SN - 1873-2291 VL - 51 IS - 23 SP - 5432 EP - 5439 PB - Springer CY - Berlin AN - OPUS4-22476 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Polte, Jörg A1 - Ahner, T. T. A1 - Delißen, Friedmar A1 - Sokolov, S. A1 - Emmerling, Franziska A1 - Thünemann, Andreas A1 - Kraehnert, R. T1 - Mechanism of gold nanoparticle formation in the classical citrate synthesis method derived from coupled in situ XANES and SAXS evaluation PY - 2010 DO - https://doi.org/10.1021/ja906506j SN - 0002-7863 SN - 1520-5126 VL - 132 IS - 4 SP - 1296 EP - 1301 PB - American Chemical Society CY - Washington, DC AN - OPUS4-23048 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Polte, Jörg A1 - Erler, Robert A1 - Thünemann, Andreas A1 - Emmerling, Franziska A1 - Kraehnert, R. T1 - SAXS in combination with a free liquid jet for improved time-resolved in situ studies of the nucleation and growth of nanoparticles PY - 2010 DO - https://doi.org/10.1039/c0cc03238g SN - 0022-4936 SN - 0009-241x SN - 1359-7345 SN - 1364-548x VL - 46 IS - 48 SP - 9209 EP - 9211 PB - Royal Society of Chemistry CY - Cambridge AN - OPUS4-23049 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mantion, Alexandre A1 - Haase, A. A1 - Graf, P. A1 - Plendl, J. A1 - Goetz, M. E. A1 - Thünemann, Andreas A1 - Luch, A. A1 - Taubert, A. A1 - Meier, W. T1 - Kolloidale Eigenschaften von Peptid-beschichteten Silber-Nanopartikeln: von Modell zur Toxicologie T2 - nANO meets water II CY - Oberhausen, Germany DA - 2010-11-11 PY - 2010 AN - OPUS4-22575 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hönnscheidt, Christoph A1 - Girod, Matthias A1 - Thünemann, Andreas A1 - Maskos, Michael T1 - Continuous Synthesis of Functional Inorganic Nanoparticles as novel Contrast Agents and Anti-microbial Reservoirs T2 - 7th International Conference on Biomedical Applications of Nanotechnology 2010 CY - Berlin, Germany DA - 2010-12-02 PY - 2010 AN - OPUS4-22807 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knappe, Patrick A1 - Bienert, Ralf A1 - Weidner, Steffen A1 - Rolf, Simone A1 - Thünemann, Andreas T1 - Nanoparticle and Polymer Analysis using Synchrotron Radiation: Coupling Small-Angle Scattering and Field-Flow Fractionation T2 - 2nd Joint BERII and BESSY II Users Meeting CY - Berlin, Germany DA - 2010-12-09 PY - 2010 AN - OPUS4-22830 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mantion, Alexandre A1 - Haase, A. A1 - Graf, P. A1 - Tentschert, J. A1 - Jungnickel, H. A1 - Draude, F. A1 - Plendl, J. A1 - Galla, S. A1 - Arlinghaus, H. F. A1 - Masic, A. A1 - Thünemann, Andreas A1 - Meier, W. A1 - Luch, A. A1 - Taubert, A. T1 - New silver nanoparticles for imaging applications: Initial data on their effects in cell culture model systems T2 - ANAKON 2010 CY - Zurich, Switzerland DA - 2010-03-23 PY - 2010 AN - OPUS4-24078 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rackwitz, Vanessa A1 - Warrikhoff, A. A1 - Panne, Ulrich A1 - Hodoroaba, Vasile-Dan T1 - Determination of Emitted X-Ray Tube Spectra by Means of a Calibrated Instrumental Setup T2 - Microscopy & Microanalysis CY - Portland, OR, USA DA - 2010-08-01 PY - 2010 AN - OPUS4-20915 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Knappe, Patrick A1 - Bienert, Ralf A1 - Weidner, Steffen A1 - Thünemann, Andreas T1 - Characterization of poly/N-vinyl-2-pyrrolidone)s with broad size distributions N2 - We report on the characterization of the solution structure of poly(N-vinyl-2-pyrrolidone)s (PVP) by small-angle X-ray scattering (SAXS) and by online coupling of asymmetrical flow field-flow fractionation (A4F), SAXS and dynamic light scattering (DLS). The commercial products PVP K30 and PVP K90 with nominal molar masses of 40 × 103 and 360 × 103 g mol-1, respectively, were investigated separately and as binary mixture. Detailed information for all polymer fractions is available on the polymer contour lengths and the diffusion coefficients. Key areas of applications for the A4F-SAXS-DLS coupling are seen in comparison to static light scattering for polymers with radii of gyration smaller than 10 nm, for which only SAXS produces precise analytical results on the size of the polymers in solution. KW - Small-angle X-ray scattering KW - SAXS KW - Field-flow fractionation PY - 2010 DO - https://doi.org/10.1016/j.polymer.2010.02.039 SN - 0032-3861 SN - 1873-2291 VL - 51 IS - 8 SP - 1723 EP - 1727 PB - Springer CY - Berlin AN - OPUS4-21222 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Polte, Jörg A1 - Erler, Robert A1 - Thünemann, Andreas A1 - Sokolov, S. A1 - Ahner, T. T. A1 - Rademann, K. A1 - Emmerling, Franziska A1 - Kraehnert, R. T1 - Nucleation and growth of gold nanoparticles studies via in situ small angle X-ray scattering at millisecond time resolution N2 - Gold nanoparticles (AuNP) were prepared by the homogeneous mixing of continuous flows of an aqueous tetrachloroauric acid solution and a sodium borohydride solution applying a microstructured static mixer. The online characterization and screening of this fast process (~2 s) was enabled by coupling a micromixer operating in continuous-flow mode with a conventional in-house small angle X-ray scattering (SAXS) setup. This online characterization technique enables the time-resolved investigation of the growth process of the nanoparticles from an average radius of ca. 0.8 nm to about 2 nm. To the best of our knowledge, this is the first demonstration of a continuous-flow SAXS setup for time-resolved studies of nanoparticle formation mechanisms that does not require the use of synchrotron facilities. In combination with X-ray absorption near edge structure microscopy, scanning electron microscopy, and UV-vis spectroscopy the obtained data allow the deduction of a two-step mechanism of gold nanoparticle formation. The first step is a rapid conversion of the ionic gold precursor into metallic gold nuclei, followed by particle growth via coalescence of smaller entities. Consequently it could be shown that the studied synthesis serves as a model system for growth driven only by coalescence processes. KW - Nanoparticle formation mechanism KW - SAXS KW - Microstructured static mixer KW - Continuous flow PY - 2010 DO - https://doi.org/10.1021/nn901499c SN - 1936-0851 VL - 4 IS - 2 SP - 1076 EP - 1082 PB - ACS Publ. CY - Washington, DC, USA AN - OPUS4-20940 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Polte, Jörg A1 - Herder, Martin A1 - Erler, Robert A1 - Rolf, Simone A1 - Fischer, A. A1 - Würth, Christian A1 - Thünemann, Andreas A1 - Kraehnert, R. A1 - Emmerling, Franziska T1 - Mechanistic insights into seeded growth processes of gold nanoparticles N2 - A facile approach for the synthesis of monodisperse gold nanoparticles with radii in the range of 7 to 20 nm is presented. Starting from monodisperse seeds with radii of 7 nm, produced in the first step, the addition of a defined amount of additional precursor material permits distinct size regulation and the realization of predicted nanoparticle sizes. These information were derived from ex- and in situ investigations by comprehensive small angle X-ray scattering (SAXS), X-ray absorption near edge structure (XANES) and UV-Vis data to obtain information on the physicochemical mechanisms. The obtained mechanisms can be transferred to other seeded growth processes. Compared to similar approaches, the presented synthesis route circumvents the use of different reducing or stabilizing agents. The size of resulting nanoparticles can be varied over a large size range presented for the first time without a measurable change in the shape, polydispersity or surface chemistry. Thus, the resulting nanoparticles are ideal candidates for size dependence investigations. KW - Gold nanoparticles KW - SAXS KW - XANES KW - Growth mechanism PY - 2010 DO - https://doi.org/10.1039/c0nr00541j SN - 2040-3364 SN - 2040-3372 VL - 2 IS - 11 SP - 2463 EP - 2469 PB - RSC Publ. CY - Cambridge AN - OPUS4-22346 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Müller, H. S. A1 - Fenchel, M. A1 - Wiggenhauser, Herbert A1 - Maierhofer, Christiane A1 - Krause, Martin A1 - Gardei, André A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Röllig, Mathias A1 - Wöstmann, Jens T1 - Zerstörungsfreie Ortung von Gefügestörungen in Betonbodenplatten N2 - Das Ziel des Forschungsvorhabens „Zerstörungsfreie Ortung von Gefügestörungen in Betonbodenplatten“ bestand in der Entwicklung eines Untersuchungskonzepts zur sicheren Ortung und Erfassung von Gefügestörungen in einseitig zugänglichen Betonplatten durch den kombinierten Einsatz verschiedener zerstörungsfreier Prüfverfahren. Hierfür wurde die Leistungsfähigkeit der folgenden Messverfahren hinsichtlich ihrer Aussageschärfe, Anwendungsgrenzen und Messgeschwindigkeit bei praxisnahen Randbedingungen untersucht: - Impakt-Echo, manuelle Impaktauslösung - Impakt-Echo, automatisierte Impaktauslösung - Ultraschall-Echo mit multistatischem Array - Impuls-Thermografie - Radar Als Versuchskörper dienten sechs liegend hergestellte Betonplatten der Abmessungen 200/200/30 cm aus zwei verschiedenen Betongüten und mit unterschiedlichem Bewehrungsgehalt (Bewehrungsgrade 0 %, 0 ,9 %, 2 ,6 %), von denen vier Platten auf trockenem und zwei Platten auf ständig nass gehaltenem Sand gelagert waren. Alle sechs Platten enthielten jeweils dieselben künstlich eingebrachten Fehlstellen: vier quadratische Kiesnester in unterschiedlicher Tiefe mit Kantenlängen zwischen 10 und 15 cm sowie drei oberflächennahe Hohlstellen (Ø 4/6/8 cm). Zur Erfassung eines möglichen Einflusses des Betonalters wurden die Messungen 4 Tage, 28 Tage sowie 180 Tage nach Herstellung der Platten durchgeführt. Um aus den Untersuchungen einen breiten Nutzen für die Praxis zu erzielen, basierten die eingesetzten Messverfahren auf handelsüblichen Geräten, welche jedoch bezüglich ihres Messprinzips und insbesondere der Datenerfassung und -auswertung weiterentwickelt wurden. Die Fehlstellengröße wurde bewusst klein gewählt. Mit Ausnahme des manuellen Impakt-Echo-Verfahrens, mit welchem unter Verwendung der Originalsoftware des Herstellers keine Fehlstellen nachweisbar waren, zeigten sich alle Messverfahren geeignet, unter verschiedenen Randbedingungen Gefügestörungen zu lokalisieren. Insgesamt wurde jeder Fehlstellentyp von zumindest einem Verfahren bei mindestens zwei Versuchskörpern detektiert. Es konnten jedoch an keiner Betonplatte mit einem einzelnen Messverfahren alle vorhandenen Fehlstellen an allen Messterminen geortet werden. Am häufigsten wurden die beiden großen oberflächennahen Fehlstellen (Hohlstelle Ø 8 cm, Kiesnest 10 cm) erkannt. Am schwersten zu lokalisieren waren die kleine Hohlstelle mit 4 cm Durchmesser sowie die beiden auf der Unterseite gelegenen Kiesnester. Die Untersuchungen zeigen, dass für eine erfolgreiche Anwendung zerstörungsfreier Messverfahren in der Praxis die Auswahl des am besten geeigneten Verfahrens bzw. einer Kombination verschiedener Verfahren jeweils auf die vorliegende Problemstellung abgestimmt sein muss. Für Betonbodenplatten mit hohem Feuchtegehalt (junger Beton) oder starker Bewehrung ist entweder das Ultraschall- oder das Impakt-Echo-Verfahren geeignet. Das Ultraschall-Verfahren wird von hohen Bewehrungsgehalten zwar stärker beeinflusst als das Impakt-Echo-Verfahren, besitzt aber eine bessere Auflösung und ermöglicht auch im oberflächennahen Bereich eine quantitative Bestimmung der Fehlstellentiefe. Das Impakt-Echo-Verfahren kann wegen der niederfrequenten Impulsanregung Fehlstellen erst in größeren Tiefen und mit schlechterer Auflösung nachweisen, ist aber ideal geeignet zur Bestimmung der Plattendicke aufgrund seines signifikanten Rückwandechos. Sowohl das Radar-Verfahren als auch die Impuls-Thermografie können bei hohen Feuchte- und Bewehrungsgehalten nur sehr oberflächennah eingesetzt werden. Bei trockenem Beton und geringen bis mittleren Bewehrungsgehalten liefert das Radar-Verfahren sehr gute Ergebnisse. In kurzer Zeit ermöglicht es eine flächendeckende Ortung der Tiefenlage und Größe von Inhomogenitäten bei guter Auflösungsgenauigkeit. Vorhandene Bewehrung wird deutlich abgebildet, kann aber darunterliegende Fehlstellen verschatten. Alternativ kann die Impuls-Thermografie für die Ortung oberflächennaher Gefügestörungen eingesetzt werden. Das Verfahren eignet sich insbesondere bei Oberflächen, die nicht direkt zugänglich sind, da zwischen Infrarotkamera und Messobjekt nur Sichtkontakt bestehen muss. Die Betongüte hatte bei keinem eingesetzten Verfahren einen erkennbaren Einfluss auf die Messergebnisse. Streng genommen ist dies jedoch nur für den Einfluss des Wasserzementwertes, der Zementart und des Zementgehalts bei gleichbleibender Sieblinie und gleicher Kornart gültig. Bei Verwendung von Leichtzuschlag sind abweichende Ergebnisse denkbar. PY - 2010 SN - 978-3-410-65075-1 SN - 0171-7197 IS - 589 SP - 1 EP - 88 PB - Beuth CY - Berlin AN - OPUS4-22699 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mull, Birte A1 - Horn, Wolfgang A1 - Jann, Oliver T1 - TDS-GC-MS-Method for the determination of volatile phthalic acid esters in the air of emission test chambers T2 - Analytica Conference 2010 CY - Munich, Germany DA - 2010-03-23 PY - 2010 AN - OPUS4-21046 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jann, Oliver A1 - Horn, Wolfgang A1 - Brödner, Doris A1 - Kalus, Sabine A1 - Juritsch, Elevtheria T1 - Emissionen flüchtiger organischer Verbindungen aus Bauprodukten T2 - VDI-Wissensforum: Schadstoffe in Bauprodukten CY - Cologne, Germany DA - 2010-11-09 PY - 2010 AN - OPUS4-22330 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Horn, Wolfgang T1 - Carcinogens and automated evaluation "ADAM" T2 - EC Workshop: Harmonised Framework on indoor material labelling schemes: challenge with a global perspective CY - Somma Lombardo, Italy DA - 2010-06-07 PY - 2010 AN - OPUS4-21505 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Horn, Wolfgang T1 - Sensorische Bewertung von Bauprodukten - Ergebnisse VOC T2 - Abschlussveranstaltung "Sensorische Bewertung von Bauprodukten" CY - Berlin, Germany DA - 2010-03-08 PY - 2010 AN - OPUS4-21021 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pyza, Lars A1 - Hahn, Oliver A1 - Horn, Wolfgang A1 - Mull, Birte A1 - Nohr, Michael A1 - Brödner, Doris A1 - Till, Carola A1 - Kalus, Sabine A1 - Wiegner, Katharina T1 - Bestimmung der Biegefestigkeit T2 - Workshop: Emissionsarme Museumsvitrinen CY - Frankfurt am Main, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22792 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiegner, Katharina A1 - Horn, Wolfgang A1 - Wilke, Olaf T1 - Auswertung von Ringversuchen zu VOC-Messung in Emissionskammern T2 - Workshop: Arbeiten mit ProLab Plus 2010 CY - Dresden, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-23105 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiegner, Katharina A1 - Hahn, Oliver A1 - Horn, Wolfgang A1 - Mull, Birte A1 - Nohr, Michael A1 - Pyza, Lars A1 - Brödner, Doris A1 - Till, Carola A1 - Kalus, Sabine T1 - Bestimmung von Ameisen- und Essigsäure T2 - Workshop: Emissionsarme Museumsvitrinen CY - Frankfurt am Main, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22243 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael T1 - Technologie-Roadmap Prozess-Sensoren 2015+ N2 - Die Wettbewerbsfähigkeit der Chemisch-Pharmazeutischen Industrie basiert auf der Sicherung der geforderten Produktqualität bei einer optimalen Nutzung von Anlagen, Rohstoffen und Energie. Eine gute Prozessführung unter Einsatz zuverlässiger Prozessautomation sichert hier den globalen Wettbewerbsvorteil. Initiiert von NAMUR und GMA und unter Mitwirkung der Unternehmen ABB, BASF, BTS, BIS Prozesstechnik, E+H, Siemens und der BAM entstand jetzt die grundlegend aktualisierte und überarbeitete Technologie-Roadmap "Prozess-Sensoren 2015+", die im November 2009 veröffentlicht wurde. KW - Roadmap KW - Prozess-Sensoren KW - Prozessanalytik KW - Process sensors KW - Process analytics PY - 2010 SN - 0178-2320 VL - 52 IS - 1-2 SP - 40 EP - 45 PB - Oldenbourg-Industrieverl. CY - München AN - OPUS4-20916 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael T1 - Die Sensorik von morgen N2 - Damit Prozesssensoren fit für die Zukunft werden, müssen sie robuster, genauer und dazu noch inlinefähig werden. Welche Anforderungen die Anwender noch an die Sensorik haben, geht aus der Technologie-Roadmap Prozess-Sensoren 2015+ hervor. PY - 2010 SN - 0344-1733 SN - 1610-8256 VL - 34 IS - Juni SP - 34 EP - 36 PB - Vogel CY - Würzburg AN - OPUS4-21873 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Vision oder Mission?- Wie die neue Technologie aus der Technologie- Roadmap Prozess-Sensoren 2015+ entsteht T2 - ProcessNet jahrestagung 2010 und 28. DECHAMA- Jahrestagung der Biotechnologen CY - Aachen, Germany DA - 2010-09-21 PY - 2010 AN - OPUS4-22666 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Die überarbeitete Technologie-Roadmap Prozess-Sensoren 2015+ (eingeladen) T2 - Endress+Hauser Entwickler-Treffen CY - Maulburg, Germany DA - 2010-04-30 PY - 2010 AN - OPUS4-22921 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Daum, Werner T1 - Die aktualisierte Technologie-Roadmap "Prozess-Sensoren 2015+" T2 - Messe "Sensor+Test 2010" CY - Nuremberg, Germany DA - 2010-05-18 PY - 2010 AN - OPUS4-21575 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael T1 - Vision oder Mission? - Wie neue Technologie aus der Technologie-Roadmap Prozess-Sensoren 2015+ entsteht PY - 2010 SN - 1436-2597 VL - 13 IS - 11 SP - 21 EP - 24 PB - GIT-Verl. CY - Darmstadt AN - OPUS4-22384 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael T1 - Die Sensorik von morgen - Anforderungen und Entwicklungsziele zeigt die Technologie-Roadmap Prozess-Sensoren 2015+ PY - 2010 SN - 0946-2856 VL - 17 IS - 3 SP - 54 EP - 56 PB - Vogel CY - Würzburg AN - OPUS4-21043 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozessanalytik - Stand und Tendenzen T2 - 4. Doktorandentagung GDCh CY - Attendorn, Germany DA - 2010-02-21 PY - 2010 AN - OPUS4-22920 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozessanalytik - Stand und Tendenzen (eingeladen) T2 - RWTH Aachen und Aixcape CY - Aachen, Germany DA - 2010-01-27 PY - 2010 AN - OPUS4-22919 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Dorgerloh, Ute A1 - Theißen, H. A1 - Becker, Roland A1 - Win, Tin T1 - Ableitung validierter Probenahme und Analysenmethoden für Zwischen- und Endprodukte der anaeroben Stoffverwertungsprozesse von Leichtflüchtigen Chlorierten Kohlenwasserstoffen (LCKW) im Grundwasser im Rahmen von Altlastenuntersuchungen N2 - Im vorliegenden Forschungsbericht werden die Ergebnisse zum LFP Projekt „Ableitung validierter Probenahme- und Analysenmethoden für Zwischen- und Endprodukte der anaeroben Stoffverwertungsprozesse von LCKW im Grundwasser im Rahmen von Altlastenuntersuchungen“ (Länderfinanzierungsprogramm, Projekt B2/08, Laufzeit vom 01.09.2008 – 31.08.2009) zusammengefasst. Es werden verschiedene Verfahren der Probenahme und Analytik zur Bestimmung von Wasserstoff, Methan, Ethen und Vinylchlorid (VC) im Grundwasser untersucht und validiert. Für die Probenahme werden folgende Ansätze beschrieben und diskutiert: i. aktive Probenahme: Pumpprobe und Probenahme von in Grundwasser gelösten Gasen in Gasbeprobungsrohren (Gasmaus) ii. passive Probenahme: Diffusionsprobenahme in Polyethylenbeuteln (PDB) und Kunststoffspritzen als Diffusionssammler für gelöste Gase Der Einsatz aktiver (Pumpprobenahme, Schöpfprobenahme) und passiver (Diffusionsprobenahme) Probenahmetechniken zur Gehaltsbestimmung von LHKW sowie Ethen und Methan in Grundwasser wird aus ordnungsbehördlicher Sicht hinsichtlich der Vergleichbarkeit von Analysendaten untersucht. Am Beispiel einer Kontamination mit Trichlorethen sowie 1,2-Dichlorethen und Vinylchlorid kann deutlich gemacht werden, dass die Einsatzmöglichkeit der passiven Probenahme durch unzureichende Strömungsverhältnisse im Aquifer sowie biologische Aktivität im Pegelrohr begrenzt ist. Der aktiven Probenahme ist bei ungeklärten oder unzureichenden Strömungsverhältnissen im Grundwasserleiter daher der Vorzug zu geben. Die chromatographischen Verfahren zur Bestimmung der Analyte werden umfänglich validiert und mit anderen geeigneten Analysenverfahren verglichen: I. Headspace-GC-FID zur Bestimmung von Methan, Ethen und VC aus der wässrigen Probenmatrix der Pumpprobe (i.) und des PDB (ii.) II. Direktinjektion-GC-PDD zur Bestimmung von Wasserstoff aus den gesammelten Gasproben der Gasmaus (i.) und der Kunststoffspritzen (ii.) Für die Bestimmung von Ethen und VC in Grundwasserproben (I.) werden Bestimmungsgrenzen von 0,1 μg/L erreicht. Methan kann aus wässrigen Proben nur ab 5 μg/L quantifiziert werden. Mit den Verfahren zur Bestimmung von Methan aus der Gasmaus (i.-II.) werden 0,1 μg/L im Grundwasser erreicht. Die Bestimmung von im Grundwasser gelösten Wasserstoff (II.) ist bis zu einer Konzentration von 1 nM möglich. Die Reproduzierbarkeit für die Bestimmung von Wasserstoff in Grundwasser liegt konzentrationsabhängig zwischen 10 bis 20% bei der aktiven Probenahme (i.-II.) und 10 bis 70% bei der passiven Probenahme (ii.-II.). Aus der Validierung der Analysenmethode und den Ergebnissen verschiedener Probenahmen werden Toleranzbereiche für die Ergebnisse eines Grundwassermonitorings abgeschätzt. Diese Streubreiten von Monitoring-Ergebnissen sollten von Ingenieurbüros und zuständige Ordnungsbehörden bei der Bewertung der komplexen Abbauprozesse eines LHKW-Grundwasserschadens beachtet werden. T3 - BAM Forschungsberichtreihe - 290 PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1610 SN - 978-3-9813346-5-4 SN - 0938-5533 VL - 290 SP - 1 EP - 121 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-161 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Esslinger, Susanne A1 - Becker, Roland A1 - Müller-Belecke, A. A1 - Bremser, Wolfram A1 - Jung, Christian A1 - Nehls, Irene T1 - HBCD stereoisomer pattern in mirror carps following dietary exposure to pure Gamma-HBCD enantiomers KW - Enantiomer-specific determination KW - HPLC-MS/MS KW - Brominated flame retardant KW - Fish feeding experiment KW - Enantiomer fraction KW - Bioisomerization PY - 2010 DO - https://doi.org/10.1021/jf101469q SN - 0021-8561 SN - 1520-5118 VL - 58 IS - 17 SP - 9705 EP - 9710 PB - American Chemical Society CY - Columbus, Ohio AN - OPUS4-23173 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Esslinger, Susanne A1 - Becker, Roland A1 - Jung, Christian A1 - Nehls, Irene A1 - Schröter-Kermani, C. T1 - Levels and Trends of Hexabromocyclododecane in Eggs of Herring Gull (1988 - 2008) from the German coast T2 - EUROPEAN - ESBs Environmental Speciern Bank Workshop CY - Berlin, Germany DA - 2010-06-21 PY - 2010 AN - OPUS4-22322 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Esslinger, Susanne A1 - Becker, Roland A1 - Jung, Christian A1 - Schröter-Kermani, C. A1 - Nehls, Irene T1 - Time courses of HBCD levels and enantiomeric signatures in herring gull eggs from the German coast T2 - Dioxin 2010 - 30th International symposium on halogenated persistent organic pollutants CY - San Antonio, TX, USA DA - 2010-09-12 PY - 2010 UR - http://www.dioxin20xx.org/pdfs/2010/10-1112.pdf N1 - Serientitel: Organohalogen Compounds – Series title: Organohalogen Compounds VL - 72 SP - 255 EP - 258 AN - OPUS4-23167 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zeleny, R. A1 - Voorspoels, S. A1 - Ricci, M. A1 - Becker, Roland A1 - Jung, Christian A1 - Bremser, Wolfram A1 - Sittidech, M. A1 - Panyawathanakit, N. A1 - Wong, W. F. A1 - Choi, S.M. A1 - Lo, K.C. A1 - Yeung, W. Y. A1 - Kim, D.H. A1 - Han, J. A1 - Ryu, J. A1 - Mingwu, S. A1 - Chao, W. A1 - Schantz, M.M. A1 - Lippa, K.A. A1 - Matsuyama, S. T1 - Evaluation of the state-of-the-art measurement capabilities for selected PBDEs and decaBB in plastic by the international intercomparison CCQM-P114 N2 - An international intercomparison involving eight national metrology institutes (NMIs) was conducted to establish their current measurement capabilities for determining five selected congeners from the brominated flame retardant classes polybrominated diphenyl ethers and polybrominated biphenyls. A candidate reference material consisting of polypropylene fortified with technical mixtures of penta-, octa- and decabromo diphenyl ether and decabromo biphenyl, which was thoroughly assessed for material homogeneity and stability, was used as study material. The analytical procedures applied by the participants differed with regard to sample pre-treatment, extraction, clean-up, employed calibrants and type of calibration procedure as well as regarding analytical methods used for separation, identification and quantification of the flame retardant congeners (gas chromatography coupled to an electron capture detector (GC-ECD), gas chromatography-mass spectrometry in the electron ionisation mode (GC-EI-MS), gas chromatography-mass spectrometry in the electron capture negative ionisation mode (GC-ECNI-MS), and liquid chromatography-inductive coupled plasma-mass spectrometry (LC-ICP-MS)). The laboratory means agreed well with relative standard deviations of the mean of means of 1.9%, 4.8%, 5.5% and 5.4% for brominated diphenyl ether (BDE) 47, 183 and 209 and for the brominated biphenyl (BB) congener 209, respectively. For BDE 206, a relative standard deviation of 28.5% was obtained. For all five congeners, within-laboratory relative standard deviations of six measurements obtained under intermediate precision conditions were between 1% and 10%, and reported expanded measurements uncertainties typically ranged from 4% to 10% (8% to 14% for BDE 206). Furthermore, the results are in good agreement with those obtained in the characterization exercise for determining certified values for the flame retardant congeners in the same material. The results demonstrate the state-of-the-art measurement capabilities of NMIs for quantifying representative BDE congeners and BB 209 in a polymer. The outcome of this intercomparison (pilot study) in conjunction with possible improvements for employing exclusively calibrants with thoroughly assessed purity suggests that a key comparison aiming at underpinning calibration and measurement capability (CMC) claims of NMIs can be conducted. KW - Flame retardants KW - Polymer KW - Polybrominated diphenyl ethers (PBDEs) KW - Polybrominated biphenyls (PBBs) KW - International intercomparison PY - 2010 DO - https://doi.org/10.1007/s00216-009-3314-7 SN - 1618-2642 SN - 1618-2650 VL - 396 IS - 4 SP - 1501 EP - 1511 PB - Springer CY - Berlin AN - OPUS4-22905 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Roland A1 - Esslinger, Susanne A1 - Nehls, Irene T1 - HBCD ISOMERS: Degradation rates and hydroxylated Products from Microsome Incubation Experiments T2 - 30th International Symposium on Halgenated Persistent Organic Pollutants (Dioxin 2010) CY - San Antonio, TX, USA DA - 2010-09-12 PY - 2010 AN - OPUS4-21606 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Casperson, Ralf A1 - Dey, Anika A1 - Pohl, Rainer A1 - Thomas, Hans-Martin T1 - Einfluss lokaler Aufhärtung ferritischer Stähle auf die Risstiefenbestimmung mit dem Wirbelstromprüfverfahren N2 - Mechanische Belastung wie z. B. der Rollkontakt zwischen den Rollen und Lagerringen eines Wälzlagers oder der Rad-Schiene-Kontakt bei der Eisenbahn führen bei ferritischen Stählen zu einer Aufhärtung der Oberfläche. Die mit der Aufhärtung verbundene Versprödung begünstigt die Entstehung von Ermüdungsrissen. Zur Risstiefenbestimmung mit dem Wirbelstromprüfverfahren werden in der Regel Kalibrierkörper mit künstlichen Testfehlern aus dem Grundwerkstoff des Prüfteils verwendet. Die betriebsbedingte Aufhärtung der Prüfteiloberfläche bleibt bei der Kalibrierung unberücksichtigt. Die lokale Aufhärtung der Oberfläche führt zu einem ortsabhängigen Offset des Wirbelstromsignals in Richtung der Rissanzeigen und somit zu einer Überbewertung der Risstiefe. Bei einzelnen Rissen lässt sich der Effekt kompensieren, in dem das Wirbelstromgerät neben jedem Riss abgeglichen bzw. die Differenz zwischen dem Offset und der Rissanzeige berechnet wird. In der Realität liegen die Ermüdungsrisse jedoch oft so dicht nebeneinander, dass auf Grund der Überlagerung benachbarter Rissanzeigen weder ein Abgleich zwischen den Rissen noch eine Bestimmung des Offsets möglich ist. Finite-Elemente-Berechnungen ermöglichen es, die in der Realität stets kombiniert auftretenden Wirbelstromsignale der Ermüdungsrisse und der Oberflächenaufhärtung getrennt zu simulieren, um Erkenntnisse für eine Verbesserung der Risstiefenbestimmung zu erlangen. T2 - DGZfP-Jahrestagung 2010 Zerstörungsfreie Materialprüfung ZfP in Forschung, Entwicklung und Anwendung CY - Erfurt, Germany DA - 10.05.2010 PY - 2010 AN - OPUS4-21482 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Roland A1 - Esslinger, Susanne A1 - Jung, Christian A1 - Schröter-Kermani, C. A1 - Nehls, Irene T1 - Time courses of HBCD levels and enantiomeric signatures in herring gull eggs from the German coast T2 - 30 th International Symposium on Halogenated Persistent Organic Pollutants (Dioxin 2010) CY - San Antonio, TX, USA DA - 2010-09-12 PY - 2010 AN - OPUS4-21600 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Esslinger, Susanne A1 - Becker, Roland A1 - Nehls, Irene T1 - HBCD isomers: degradation rates and hydroxylated products from microsome incubation experiments T2 - Dioxin 2010 - 30th International symposium on halogenated persistent organic pollutants CY - San Antonio, TX, USA DA - 2010-09-12 PY - 2010 UR - http://www.dioxin20xx.org/pdfs/2010/10-1113.pdf N1 - Serientitel: Organohalogen Compounds – Series title: Organohalogen Compounds VL - 72 SP - 259 EP - 262 AN - OPUS4-23168 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Scharf, Holger A1 - Becker, Roland A1 - Bremser, Wolfram A1 - Buge, Hans-Gerhard A1 - Lück, Detlef T1 - Certification of the mass fractions of trace elements and pentachlorophenol in an impregnated wood reference material N2 - The resource-saving utilisation of recovered waste wood is a matter of growing concern. In several European countries, this utilisation is governed by regulations and is dependent on the contents of certain trace elements and organic compounds. Thus, for decisionmaking with respect to waste wood management (recycling or combustion), reliable analytical data are needed and, due to their great economic and environmental impact, must be assured by appropriate quality control. To support the improvement in quality assurance in waste wood analysis, for the first time, a wood reference material was certified for its mass fractions of arsenic, cadmium, chromium, copper, lead, mercury, and pentachlorophenol (PCP). These analytes were selected because they represent typical constituents of wood preservatives most widely used in the past. Material preparation and testing of homogeneity and stability were carried out by BAM Federal Institute for Materials Research and Testing. The certification measurements were performed involving selected laboratories with documented expertise in the field of waste wood analysis. The certified values and their corresponding uncertainties were assigned in full compliance with the requirements of ISO Guide 35. The certified mass fractions and their expanded uncertainties (k/i> = 2) are as follows: (3.1 ± 0.5) mg/kg for As, (3.02 ± 0.24) mg/kg for Cd, (36.4 ± 2.6) mg/kg for Cr, (22.9 ± 1.7) mg/kg for Cu, (0.60 ± 0.14) mg/kg for Hg, (39 ± 4) mg/kg for Pb, and (7.9 ± 0.6) mg/kg for PCP. The certified material is available as European Reference Material ERM®-CD100. KW - Waste wood KW - Trace elements KW - Pentachlorophenol KW - Certification KW - European reference material PY - 2010 DO - https://doi.org/10.1007/s00769-010-0699-0 SN - 0949-1775 SN - 1432-0517 VL - 15 IS - 11 SP - 613 EP - 619 PB - Springer CY - Berlin AN - OPUS4-22392 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lopez Meza, Sarynna A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Simon, Franz-Georg T1 - Effect of contact time on the release of contaminants from granular waste materials during column leaching experiments N2 - When reusing or disposing of contaminated granular waste materials there is a need to evaluate how the contaminants will interact on the pathway soil-groundwater and the effect this interaction will have on the surrounding environment. While column testing can provide a closer approximation to field percolation conditions than batch testing, there is still a need to develop column testing procedures that consider the requirements of practical testing time frames. This study evaluates the effect of different column contact times (2.5, 5, and 16 h) on the release of inorganic constituents from bottom ash and demolition waste, two commonly reused granular materials. Leaching data for representative constituents of concern, such as copper, chromium, sulfate and chloride, as well as pH and electrical conductivity was compared for all different contact times studied. Results for the materials investigated in this study showed that variations in contact time have no significant effect on the release of the selected constituents and leaching parameters at low liquid to solid ratios. However, after a liquid to solid ratio of 1 L/kg, the effect is more noticeable, and higher contact times show lower pH values as well as a reduction in the release of constituents of concern from bottom ash. In the case of demolition waste, the variation of contact time did not have a strong effect on the leaching behavior. KW - Leaching procedures KW - Standardisation KW - Column tests KW - Contact time KW - Granular materials KW - Waste PY - 2010 DO - https://doi.org/10.1016/j.wasman.2009.11.022 SN - 0956-053X VL - 30 IS - 4 SP - 565 EP - 571 PB - Pergamon Press CY - New York, NY AN - OPUS4-20934 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dorgerloh, Ute A1 - Theissen, H. A1 - Becker, Roland A1 - Hilbert, S. A1 - Nehls, Irene T1 - Probennahme und Quantifizierung von LHKW, Ethen und Methan in Grundwasser N2 - Der Einsatz aktiver (Pumpprobennahme, Schöpfprobennahme) und passiver (Diffusionsprobennahme) Probennahmetechniken zur Gehaltsbestimmung von LHKW sowie Ethen und Methan in Grundwasser wird aus ordnungsbehördlicher Sicht hinsichtlich der Vergleichbarkeit von Analysendaten untersucht. Am Beispiel einer Kontamination mit Trichlorethen sowie 1,2-Dichlorethen und Vinylchlorid kann deutlich gemacht werden, dass die Einsatzmöglichkeit der passiven Probennahme durch unzureichende Strömungsverhältnisse im Aquifer sowie biologische Aktivität im Pegelrohr begrenzt ist. Der aktiven Probennahme ist bei ungeklärten oder unzureichenden Strömungsverhältnissen im Grundwasserleiter daher der Vorzug zu geben. Das gaschromatographische Verfahren für Vinylchlorid mittels Dampfraumtechnik wird um die Quantifizierung von Methan und Ethen erweitert. Dabei werden für die Bewertung von Altlasten relevante Bestimmungsgrenzen von 0,1 µg/l (Vinylchlorid, Ethen) sowie 5 µg/l (Methan) erreicht. Aus der Validierung der Analysenmethode und den Ergebnissen verschiedener Probennahmen werden Toleranzbereiche für die Ergebnisse eines Grundwassermonitorings abgeschätzt. Diese Streubreiten von Monitoring- Ergebnissen sollten von Ingenieurbüros und zuständigen Ordnungsbehörden bei der Bewertung der komplexen Abbauprozesse eines LHKW-Grundwasserschadens beachtet werden. KW - Passive sampling KW - Active sampling KW - Groundwater KW - Trichloroethene KW - Vinyl chloride KW - Methane PY - 2010 DO - https://doi.org/10.1007/s00767-010-0144-7 SN - 1430-483X VL - 15 IS - 4 SP - 231 EP - 239 PB - Springer CY - Berlin ; Heidelberg AN - OPUS4-22617 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Oliver A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Simon, Franz-Georg A1 - López Meza, S. T1 - Leaching experiments on the release of heavy metals and PAH from C&D waste and MSWI bottom ash N2 - Leaching tests are fundamental tools for the assessment of long-term impact of contaminated waste materials on the soil-groundwater pathway. Waste materials should be tested under conditions equal to their actual application in re-use scenarios to achieve reliable results. Since the standards for leaching procedures available on international level so far are either not validated or considered inadequate in respect to coarse grained materials, new standards had to be developed. Therefore column percolation and batch test procedures have been standardized and validated to enable their introduction to new German regulations concerning waste management. Practical aspects of the test procedures as well as the boundary conditions compared to the already existing standards will be described. Examples including round robin test results will be given to justify the selection of the new specifications. T2 - 2nd International conference on hazardous and industrial waste management CY - Chania, Crete, Greece DA - 2010-10-05 KW - Leaching KW - Bioavailability KW - Column tests KW - Batch tests PY - 2010 IS - Session A, A5.1. SP - 1 EP - 8 AN - OPUS4-22128 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Berger, Wolfgang A1 - Simon, Franz-Georg A1 - Weimann, Karin A1 - Alsema, E. A. T1 - A novel approach for the recycling of thin film photovoltaic modules N2 - A sustainable recycling of photovoltaic (PV) thin film modules gains in importance due to the considerable growing of the PV market and the increasing scarcity of the resources for semiconductor materials. The paper presents the development of two strategies for thin film PV recycling based on (wet) mechanical processing for broken modules, and combined thermal and mechanical methods for end-of-life modules. The feasibility of the processing steps was demonstrated in laboratory scale as well as in semi-technical scale using the example of CdTe and CIS modules. Pre-concentrated valuables In and Te from wet mechanical processing can be purified to the appropriate grade for the production of new modules. An advantage of the wet mechanical processing in comparison to the conventional procedure might be the usage of no or a small amount of chemicals during the several steps. Some measures are necessary in order to increase the efficiency of the wet mechanical processing regarding the improvement of the valuable yield and the related enrichment of the semiconductor material. The investigation of the environmental impacts of both recycling strategies indicates that the strategy, which includes wet mechanical separation, has clear advantages in comparison to the thermal treatment or disposal on landfills. KW - Recycling KW - Photovoltaic KW - Thin film modules KW - CdTe KW - CIS KW - Mechanical processing KW - Life cycle analysis PY - 2010 DO - https://doi.org/10.1016/j.resconrec.2009.12.001 SN - 0921-3449 VL - 54 IS - 10 SP - 711 EP - 718 PB - Elsevier CY - Amsterdam [u.a.] AN - OPUS4-21439 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute A1 - Krüger, Oliver A1 - Berger, Wolfgang A1 - Simon, Franz-Georg T1 - Source term determination by leaching procedures - new developments in Germany T2 - Global waste management symposium CY - San Antonio, TX, USA DA - 2010-10-03 KW - Elutionsverfahren KW - Abfall PY - 2010 SP - 1 EP - 11(?) AN - OPUS4-22256 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mönch, Bettina A1 - Gebert, Antje A1 - Becker, Roland A1 - Nehls, Irene T1 - Alkylglucuronide - Möglichkeiten zur detektion des Alkoholkonsums T2 - Tag der Chemie, FU Berlin CY - Berlin, Germany DA - 2010-06-16 PY - 2010 AN - OPUS4-21418 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Schartel, Bernhard ED - Wilkie, C. A. ED - Morgan, A.B. T1 - Uses of fire tests in materials flammability development PY - 2010 SN - 978-1-4200-8399-6 IS - Chapter 15 SP - 387 EP - 420 PB - CRC Press CY - Boca Raton, FL, USA ET - Second Edition AN - OPUS4-21085 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Karrasch, Andrea A1 - Wawrzyn, Eliza A1 - Schartel, Bernhard A1 - Jäger, Christian T1 - Solid-state NMR on thermal and fire residues of bisphenol A polycarbonate/silicone acrylate rubber/bisphenol A bis(diphenyl-phosphate)/(PC(SiR/BDP) and PC/SiR/BDP/zinc borate (PC/SiR/BDP/ZnB) - Part II: The influence of SiR N2 - Solid residues of bisphenol A polycarbonate (containing 0.45 wt% poly(tetrafluoroethylene))/silicone acrylate rubber/bisphenol A bis(diphenyl-phosphate) (PC/SiR/BDP) and PC/SiR/BDP/zinc borate (PC/SiR/BDP/ZnB) after thermal treatment were investigated by solid-state and liquid-state NMR, focusing on the role and interaction of SiR with the other components of the polymer blend. In PC/SiR/BDP, part of the SiR reacts to an amorphous silicate network rather than being completely released in the gas phase. The silicate network consists of Q4 and Q3 groups formed via intermediate D and T groups. The D groups are formed by a reaction of SiR with bisphenol-A units as well as phenyl groups of PC and BDP. In addition a small amount of silicon diphosphate was observed after thermal treatment at temperatures higher than 810 K. The same decomposition products (without SiP2O7) occur in the solid residues of PC/SiR/BDP/ZnB samples. The formation of intermediate D and T groups occurs earlier, at slightly lower temperatures. Any formation of a borosilicate network was excluded. The results also apply for the fire residues of PC/SiR/BDP and PC/SiR/BDP/ZnB and are thus valuable for understanding the impact of SiR on pyrolysis and flame retardancy mechanisms in the condensed phase during the burning of PC/SiR/BDP blends. SiR was found to influence the pyrolysis and the char formed. Beyond the replacement of highly combustible mechanical modifiers, SiR harbours the potential to enhance flame retardancy. KW - Flame retardance KW - 29Si NMR KW - Polycarbonate (PC) blends KW - Bisphenol A bis(diphenyl)phosphate (BDP) KW - Silicone rubber PY - 2010 DO - https://doi.org/10.1016/j.polymdegradstab.2010.07.030 SN - 0141-3910 SN - 1873-2321 VL - 95 IS - 12 SP - 2534 EP - 2540 PB - Applied Science Publ. CY - London AN - OPUS4-22648 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dey, Anika A1 - Casperson, Ralf A1 - Pohl, Rainer A1 - Thomas, Hans-Martin T1 - Die Wirbelstromprüfung als Hilfsmittel für die Schieneninstandhaltung N2 - Die zerstörungsfreie Oberflächenprüfung an verlegten Eisenbahnschienen mit Wirbelstrom hat in den letzten Jahren durch ständige Weiterentwicklung und Verifizierung enorm an Bedeutung gewonnen. Es wurde u.a. angestrebt zuverlässige Planungsgrößen für den Einsatz von Instandhaltungsmaßnahmen zu erhalten, durch deren gezielten Einsatz Risswachstum unterbunden werden kann. Die Ursache für das Wachstum von Rissen in der Schiene liegt in der Materialermüdung des Werkstoffes infolge der Betriebsbelastungen im Rad-Schiene-Kontakt. Nach einer gewissen Beanspruchungsdauer kommt es an den Kontaktflächen der Fahrkante zu einer Kaltverfestigung des Schienenstahls. Durch fortschreitende Verfestigung des kontaktbeanspruchten Oberflächenbereichs der gehärteten Schicht wird der Werkstoff spröde und es bilden sich feine Risse aus. Die Risse wachsen anfangs unter einem flachen Winkel in das Schieneninnere hinein, neigen dann aber ab einem gewissen Stadium dazu in das Innere des Schienenkopfes abzukippen, was im Extremfall zu einem Schienenbruch führen kann. Diese Rollkontaktermüdungsrisse, auch genannt Head Checks, entstehen bevorzugt in der Fahrkante von bogenäußeren Schienen. Die Anwendung der Wirbelstromprüfung an der Schiene wurde bisher zur Ermittlung der Schädigungstiefe dieser Rollkontaktermüdungsrisse eingesetzt. Das Wirbelstromverfahren besitzt die Eigenschaft, sehr empfindlich auf alle Veränderungen der Materialeigenschaften an der Oberfläche zu reagieren. Daher wurde festgestellt, dass sich neben der Detektion von Rissen auch Fehler wie Eindrückungen oder Schlupfwellen, bis hin zu Materialveränderungen durch Schweißen oder Aufhärtungen in der Schienenoberfläche bestimmen lassen. Die Wirbelstromprüfung besitzt daher das Potenzial, mögliche Orte der Entstehung von Ermüdungsrissen in einem extrem frühzeitigen Stadium nachzuweisen. Ziel ist es, die rissgefährdeten Zonen schon im Zustand der Kaltverfestigung zu identifizieren. Dadurch können sich neue Aspekte für die präventive Schieneninstandhaltung ergeben. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 10.05.2010 KW - Wirbelstromprüfung KW - Rollkontaktermüdung KW - Schienenfehler KW - Eisenbahnschiene PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (P68) SP - 1 EP - 7 CY - Berlin AN - OPUS4-21886 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kreutzbruck, Marc A1 - Thomas, Hans-Martin A1 - Casperson, Ralf A1 - Reimund, Verena A1 - Blome, Mark A1 - Allweins, K. A1 - Lembke, G. ED - Thompson, D.O. ED - Chimenti, D.E. T1 - Magnetic response field of spherical defects within conductive components N2 - The determination of magnetic distortion fields caused by inclusions hidden in a conductive matrix using homogeneous current flow needs to be addressed in multiple tasks of electromagnetic non-destructive testing and materials science. This includes a series of testing problems such as the detection of tantalum inclusions hidden in niobium plates, metal inclusion in a nonmetallic base material or porosity in aluminum laser welds. Unfortunately, straightforward tools for an estimation of the defect response fields above the sample using pertinent detection concepts are still missing. In this study the Finite Element Method (FEM) was used for modeling spherically shaped defects and an analytical expression developed for the strength of the response field including the conductivity of the defect and matrix, the sensor-to-inclusion separation and the defect size. Finally, the results also can be useful for Eddy Current Testing problems, by taking the skin effect into consideration. T2 - 36th Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Kingston, RI, USA DA - 2009-07-26 KW - Electromagnetic testing KW - Spherical defects KW - Finite element method PY - 2010 SN - 978-0-7354-0748-0 SN - 0743-0760 SN - 0094-243X N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings SP - 1 EP - 8 CY - Melville, NY AN - OPUS4-21815 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wu, Guang Mei A1 - Schartel, Bernhard A1 - Bahr, Horst A1 - Kleemeier, M. A1 - Yu, D. A1 - Hartwig, A. T1 - Nanocomposites - two new pieces of the puzzle: Combination with low-melting glasses and an experimental insight in the shielding effect T2 - International Symposium on Flame-Retardant Materials & Technologies 2010 (ISFRMT 2010) CY - Chengdu, China DA - 2010-09-17 PY - 2010 AN - OPUS4-22116 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pohl, Rainer A1 - Casperson, Ralf A1 - Dey, Anika A1 - Thomas, Hans-Martin T1 - Head Check Prüfung mit Wirbelstrom - Grundlagen, Fehlerquellen, Zuverlässigkeit der Prüfaussage T2 - Workshop Fahrbahn und ZfP - Prüfaufsichten im Oberbau 2010 CY - Regensburg, Germany DA - 2010-05-17 PY - 2010 AN - OPUS4-21751 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, M. A1 - Bykov, Y. A1 - Schmidt, A. A1 - Krämer, J. A1 - Altstädt, V. A1 - Perret, Birgit A1 - Schartel, Bernhard T1 - Flame retardancy of epoxy resins and their carbon fiber reinforced composites T2 - 14th European Conference on Composite Materials (ECCM) CY - Budapest, Hungary DA - 2010-06-07 PY - 2010 AN - OPUS4-21723 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gallo, Emanuela A1 - Schartel, Bernhard A1 - Braun, Ulrike A1 - Russo, P. A1 - Acierno, Domenico T1 - Fire retardant synergisms between nanometric metal oxides and aluminium phosphinate in poly(butylene terephthalate) T2 - Interflam 2010 CY - Nottingham, England DA - 2010-07-05 PY - 2010 AN - OPUS4-21720 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Casperson, Ralf A1 - Dey, Anika A1 - Pohl, Rainer A1 - Reimund, Verena A1 - Thomas, Hans-Martin T1 - Einfluss lokaler Aufhärtung ferritischer Stähle auf die Risstiefenbestimmung mit dem Wirbelstromprüfverfahren N2 - Mechanische Belastung wie z. B. der Rollkontakt zwischen den Rollen und Lagerringen eines Wälzlagers oder der Rad-Schiene-Kontakt bei der Eisenbahn führen bei ferritischen Stählen zu einer Aufhärtung der Oberfläche. Die mit der Aufhärtung verbundene Versprödung begünstigt die Entstehung von Ermüdungsrissen. Zur Risstiefenbestimmung mit dem Wirbelstromprüfverfahren werden in der Regel Kalibrierkörper mit künstlichen Testfehlern aus dem Grundwerkstoff des Prüfteils verwendet. Die betriebsbedingte Aufhärtung der Prüfteiloberfläche bleibt bei der Kalibrierung unberücksichtigt. Die lokale Aufhärtung der Oberfläche führt zu einem ortsabhängigen Offset des Wirbelstromsignals in Richtung der Rissanzeigen und somit zu einer Überbewertung der Risstiefe. Bei einzelnen Rissen lässt sich der Effekt kompensieren, in dem das Wirbelstromgerät neben jedem Riss abgeglichen bzw. die Differenz zwischen dem Offset und der Rissanzeige berechnet wird. In der Realität liegen die Ermüdungsrisse jedoch oft so dicht nebeneinander, dass auf Grund der Überlagerung benachbarter Rissanzeigen weder ein Abgleich zwischen den Rissen noch eine Bestimmung des Offsets möglich ist. Finite-Elemente-Berechnungen ermöglichen es, die in der Realität stets kombiniert auftretenden Wirbelstromsignale der Ermüdungsrisse und der Oberflächenaufhärtung getrennt zu simulieren, um Erkenntnisse für eine Verbesserung der Risstiefenbestimmung zu erlangen. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 10.05.2010 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (P25) SP - 1 EP - 5 CY - Berlin AN - OPUS4-21887 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schartel, Bernhard T1 - Understanding Fire Retardancy Mechanisms in Polymer Composites: A Key for Future Development T2 - Institutskolloquium DLR CY - Braunschweig, Germany DA - 2010-08-18 PY - 2010 AN - OPUS4-22224 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Increasing Materials Efficiency in Industry T2 - EIONET Workshop CY - Berlin, Germany DA - 2010-11-10 PY - 2010 AN - OPUS4-22387 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krämer, J. A1 - Beier, U. A1 - Altstädt, V. A1 - Stöß, K. A1 - Diederichs, J. A1 - Ciesielski, M. A1 - Döring, M. A1 - Perret, Birgit A1 - Schartel, Bernhard T1 - New halogen free flame retardants for high performance epoxy resins T2 - SAMPE Fall Technical Conference CY - Salt Lake City, UT, USA DA - 2010-10-11 PY - 2010 AN - OPUS4-23392 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Jakobs, Désirée A1 - Mathies, Helena A1 - Abraham, W.-R. A1 - Pritzkow, Wolfgang A1 - Stephan, Ina A1 - Noll, Matthias T1 - Biodegradation of a biocide (Cu-N-cyclohexyldiazenium dioxide) component of a wood preservative by a defined soil bacterial community N2 - The wood protection industry has refined their products from chrome-, copper-, and arsenate-based wood preservatives toward solely copper-based preservatives in combination with organic biocides. One of these is Cu-HDO, containing the chelation product of copper and N-cyclohexyldiazenium dioxide (HDO). In this study, the fate of isotope-labeled (13C) and nonlabeled (12C) Cu-HDO incorporated in wood sawdust mixed with soil was investigated. HDO concentration was monitored by high-pressure liquid chromatography. The total carbon and the δ13C content of respired CO2, as well as of the soil-wood-sawdust mixture, were determined with an elemental analyzer-isotopic ratio mass spectrometer. The concentration of HDO decreased significantly after 105 days of incubation, and after 24 days the 13CO2 concentration respired from soil increased steadily to a maximum after 64 days of incubation. Phospholipid fatty acid-stable isotope probing (PFA-SIP) analysis revealed that the dominant PFAs C19:0d8,9, C18:0, C18:1ω7, C18:2ω6,9, C17:1d7,8, C16:0, and C16:1ω7 were highly enriched in their δ13C content. Moreover, RNA-SIP identified members of the phylum Acidobacteria and the genera Phenylobacterium and Comamonas that were assimilating carbon from HDO exclusively. Cu-HDO as part of a wood preservative effectively decreased fungal wood decay and overall microbial respiration from soil. In turn, a defined bacterial community was stimulated that was able to metabolize HDO completely. KW - 16S rRNA KW - Biocide KW - PLFA KW - Stable isotope probing KW - Soil KW - Wood preservative PY - 2010 DO - https://doi.org/10.1128/AEM.01092-10 SN - 0099-2240 VL - 76 IS - 24 SP - 8076 EP - 8083 PB - American Society for Microbiology CY - Washington, DC [u.a.] AN - OPUS4-22688 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harrer, Andrea A1 - Nies, Daniel A1 - Pulz, Robert A1 - Kervalishvili, Guram N. A1 - Rehmer, Birgit A1 - Stephan, Ina A1 - Maierhofer, Christiane T1 - Untersuchung von Transport- und Schädigungsprozessen mittels lokal angeregter aktiver Thermografie N2 - Als schnelles und berührungsfreies Messverfahren kann die aktive Thermografie auch in-situ eingesetzt werden, d.h. während sich Materialeigenschaften aufgrund direkter oder indirekter Einflüsse ändern. In diesem Beitrag stellen wir die Methode der aktiven Thermografie mittels lokaler Laseranregung und deren Anwendung auf unterschiedliche Materialien wie Holz, Sandstein und Keramiken vor. Mit der im Folgenden beschriebenen Methode wurden der Einfluss von Holzschutzmitteln auf die thermischen Eigenschaften von Holz, Feuchtetransportprozesse in Naturstein sowie die thermischen Eigenschaften von Siliziumcarbid unterschiedlicher Dicke und von Hochtemperaturkeramiken nach zunehmender thermischer Belastung in-situ untersucht. Experimentelle Ergebnisse werden u. a. im Vergleich mit numerischen Simulationen vorgestellt. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (P36) SP - 1 EP - 9 CY - Berlin AN - OPUS4-21888 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stephan, Ina T1 - Biocides in synthetic materials: what do they need to do? N2 - Biocides are used in a wide range of materials of both synthetic as well as natural origin. Natural materials such as wood or wool often have very limited natural durability and environmental processes degrade and recycle the material by physical, chemical and biological means. However, mankind often aims to prolong the service life of these products especially when value has been added by using these materials e.g. for building purposes or clothing. The use of biocides is often welcomed when other means to protect a natural material (e.g. keep it dry, out of reach for insects) cannot be achieved. T2 - 2nd International Conference - Biocides in synthetic materials 2010 CY - Berlin, Germany DA - 2010-09-28 KW - Biozid KW - Kunststoffe KW - Konservierung KW - Desinfektion KW - Biocide KW - Synthetic materials KW - Preservation KW - Disinfection KW - Treated articles PY - 2010 SN - 978-1-84735-554-6 IS - Session 1 / Paper 1 SP - 1 EP - 7 AN - OPUS4-22015 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Noll, Matthias A1 - Stephan, Ina T1 - Seasonal shifts of fungal community structure at the interface of treated or untreated wood and soil T2 - 41st Annual meeting of the international research group on wood protection CY - Biarritz, France DA - 2010-05-09 KW - Fungal community KW - Chromated-copper-arsenate wood preservative (CCA) KW - Soil contact KW - Field test PY - 2010 IS - IRG/WP 10-10721 SP - 1 EP - 10 CY - Stockholm, Sweden AN - OPUS4-21329 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harrer, Andrea A1 - Krankenhagen, Rainer A1 - Nies, Daniel A1 - Stephan, Ina A1 - Maierhofer, Christiane T1 - Visualisation of Transport Processes in Building Materials by Laser Induced Active Thermography T2 - 10th European Conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-21645 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harrer, Andrea A1 - Nies, Daniel A1 - Pulz, Robert A1 - Kervalishvili, Guram N. A1 - Rehmer, Birgit A1 - Stephan, Ina A1 - Maierhofer, Christiane T1 - Untersuchung von Transport- und Schädigungsprozessen mittels likal angeregter aktiver Thermografie T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21636 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Noll, Matthias A1 - Stephan, Ina T1 - Seasonal shifts of fungal community structure at the interface of treated or untreated wood and soil T2 - Jahrestagung der International research group on wood protection (IRG) CY - Biarritz, France DA - 2010-05-09 PY - 2010 AN - OPUS4-21317 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tiebe, Carlo A1 - Stephan, Ina A1 - Hübert, Thomas A1 - Gierds, Jana T1 - Ionenmobilitätsspektrometrie: Dem Schimmel auf der Spur T2 - Workshop Lebensmittelmonitoring mit Multigassensoren CY - Berlin, Germany DA - 2010-12-07 PY - 2010 AN - OPUS4-22961 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stephan, Ina T1 - Biocides in synthetic matials: what do they need to do? T2 - Biocides in Synthetic Materials 2010, BAM CY - Berlin, Germany DA - 2010-09-28 PY - 2010 AN - OPUS4-22931 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dorgerloh, Ute A1 - Becker, Roland A1 - Theißen, H. A1 - Nehls, Irene T1 - The quantification of hydrogen and methane in contaminated groundwater: validation of robust procedures for sampling and quantification N2 - A number of currently recommended sampling techniques for the determination of hydrogen in contaminated groundwater were compared regarding the practical proficiency in field campaigns. Key characteristics of appropriate sampling procedures are reproducibility of results, robustness against varying field conditions such as hydrostatic pressure, aquifer flow, and biological activity. Laboratory set-ups were used to investigate the most promising techniques. Bubble stripping with gas sampling bulbs yielded reproducible recovery of hydrogen and methane which could be verified for groundwater sampled in two field campaigns. The methane content of the groundwater was confirmed by analysis of directly pumped samples thus supporting the trueness of the stripping results. Laboratory set-ups and field campaigns revealed that bubble stripping of hydrogen may be restricted to the type of used pump. Concentrations of dissolved hydrogen after bubble stripping with an electrically driven submersible pump were about one order of magnitude higher than those obtained from diffusion sampling. The gas chromatographic determination for hydrogen and methane requires manual injection of gas samples and detection by a pulsed discharge detector (PDD) and allows limits of quantification of 3 nM dissolved hydrogen and 1 µg L-1 dissolved methane in groundwater. The combined standard uncertainty of the bubble stripping and GC/PDD quantification of hydrogen in field samples was 7% at 7.8 nM and 18% for 78 nM. PY - 2010 DO - https://doi.org/10.1039/c0em00091d SN - 1464-0325 SN - 1464-0333 VL - 12 IS - 10 SP - 1876 EP - 1884 PB - Royal Society of Chemistry CY - Cambridge AN - OPUS4-22176 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Esslinger, Susanne A1 - Becker, Roland A1 - Jung, Christian A1 - Nehls, Irene A1 - Schröter-Kermani, C. T1 - Levels and Trends of Hexabromocyclododecane in Eggs of Herring Gull (1988-2008) fromm the German coast T2 - 1st Kiel Food Science Symposium 2010 CY - Kiel, Germany DA - 2010-05-18 PY - 2010 AN - OPUS4-21097 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Esslinger, Susanne A1 - Becker, Roland A1 - Maul, Ronald A1 - Nehls, Irene T1 - Hexabromcyclododecan - Untersuchungen zum Phase I Metabolismus PY - 2010 SN - 0934-3504 SN - 1865-5084 VL - 22 IS - 4 SP - 364 PB - Springer CY - Heidelberg AN - OPUS4-22907 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Köppen, Robert A1 - Becker, Roland A1 - Esslinger, Susanne A1 - Nehls, Irene T1 - Enantiomer-specific analysis of hexabromocyclododecane in fish from Etnefjorden (Norway) N2 - High-performance liquid chromatography tandem mass spectrometry (HPLC–MS/MS) was applied to sterospecifically quantify the content of α-, β-, and γ-hexabromocyclododecane (HBCD) in six fish species from the Norwegian Etnefjorden. A combination of a β-PM cyclodextrin and an achiral column enabled the paired chromatographic separation of the stereoisomers in the order (-)-α-, (+)-α-, (-)-β-, (+)-β-, (+)-γ- and, (-)-γ-HBCD. The limits of detection were in the range of 6–21 pg g-1 depending on the stereoisomer and the concentrations of α-, β-, and γ-HBCD in fillets ranged from <5.4 ng g-1 to 11.1 µg g-1 lipid weight. α-HBCD enantiomers were throughout dominating, and in most cases the accumulation of the respective first eluted enantiomers ((-)-α-, (-)-β- and (+)-γ-HBCD) was observed. Deviations from the racemic EF-value were considered to be significant if it was outside of the expanded uncertainty range for each of the racemic HBCD-ratios. The composition of HBCD isomers varied between the investigated fish species and the relative high values for the γ-HBCD concentrations for the bottom-dwellers flounder and thorny skate seems to echo the HBCD pattern of ocean sediments. KW - Flame retardant KW - Diastereomers KW - Chiral separation KW - Bioaccumulation KW - Enantiomeric fraction PY - 2010 DO - https://doi.org/10.1016/j.chemosphere.2010.06.019 SN - 0045-6535 SN - 0366-7111 VL - 80 IS - 10 SP - 1241 EP - 1245 PB - Elsevier Science CY - Kidlington, Oxford AN - OPUS4-22377 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Esslinger, Susanne A1 - Köppen, Robert A1 - Becker, Roland A1 - Nehls, Irene T1 - Enantiomerenspezifischer Vergleich von HBCD-Gehalten maritimer Lebewesen zweier norwegischer Fjorde T2 - 4. Gemeinsame Jahrestagung der GDCh-Fachgruppe Umweltchemie und Ökotoxikologie und der Society of Environmental Toxikology and Chemistry Europe (Umwelt 2010) CY - Dessau-Roßlau, Germany DA - 2010-09-06 PY - 2010 AN - OPUS4-21602 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Esslinger, Susanne A1 - Becker, Roland A1 - Maul, Ronald A1 - Nehls, Irene T1 - Hexabromcyclododecan - Untersuchungen zum Phase I Metabolismus T2 - 4. Gemeinsame Jahrestagung der GDCh-Fachgruppe Umweltchemie und Ökotoxikologie und der Society of Environmental Toxikology and Chemistry Europe (Umwelt 2010) CY - Dessau-Roßlau, Germany DA - 2010-09-06 PY - 2010 AN - OPUS4-21604 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Esslinger, Susanne A1 - Köppen, Robert A1 - Becker, Roland A1 - Nehls, Irene T1 - Enantiomerenspezifischer Vergleich von HBCD-Gehalten maritimer Lebewesen zweier norwegischer Fjorde PY - 2010 SN - 0934-3504 SN - 1865-5084 VL - 22 IS - 4 SP - 441 PB - Springer CY - Heidelberg AN - OPUS4-22906 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Esslinger, Susanne A1 - Köppen, Robert A1 - Nehls, Irene A1 - Becker, Roland T1 - Enantio-specific Determination of HBCD in Fish und Seafood from a Norwegian Fjord T2 - 1st Kiel Food Science Symposium 2010 CY - Kiel, Germany DA - 2010-05-18 PY - 2010 AN - OPUS4-21093 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nehls, Irene A1 - Koch, Matthias A1 - Köppen, Robert A1 - Siegel, David A1 - Merkel, Stefan A1 - Piechotta, Christian A1 - Becker, Roland A1 - Win, Tin T1 - Lebensmittelanalytik - eine neue Herausforderung an die BAM T2 - Einladung zum Institutskolloquium, Institut für Landschaftsdynamik, Leibniz-Zentrum für Agrarlandschaftsforschung (ZALF) e. V. CY - Müncheberg, Germany DA - 2010-02-16 PY - 2010 AN - OPUS4-21058 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann-Böllinghaus, Anja T1 - Fire development in a real fire in a five storey dwelling Experimental and numerical investigations T2 - 11th International Symposium on Fire Protection CY - Leipzig, Germany DA - 2010-06-08 PY - 2010 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. AN - OPUS4-21430 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Illerhaus, Bernhard A1 - Badde, Aurelia A1 - Michaelis, Matthias A1 - Berger, U. A1 - Onel, Yener A1 - Meinel, Dietmar A1 - Goebbels, Jürgen T1 - Einsatz von mobilen Röntgenuntersuchungsmethoden im Museum - Zwei Fallbeispiele N2 - Zwei Bildhauermodelle aus dem Georg-Kolbe-Museum Berlin standen zur Restaurierung an. Das kleinere, 'Lucino' (1920), 41cm, wurde hochauflösend mit CT gemessen, da mittels CT sowohl der Herstellungsprozeß einer Gipsstatue als auch der innere Zustand, wie Ergänzungen, Klebungen und Armierungen, festgestellt werden können. Aus den CT Bildern ergab sich eine für die vorher vermutete Gipszusammensetzung ungewöhnliche innere Struktur. Mit einer Freihand bedienten Röntgenpistole zur Messung der Röntgenfluoreszenz wurde daraufhin die Zusammensetzung des Materials der Statuette als Terracotta bestimmt. Durch den Einsatz von Helium als Spülmittel konnten auch leichte Materialien nachgewiesen und so eine Unterscheidung zwischen Gips und gebranntem Ton durchgeführt werden. Aus den CT Daten wurde eine virtuelle Darstellung der äußeren Geometrie gewonnen. Ein damit versuchsweise erstelltes Replik (Rapid Prototyping, 3D-Drucker, TU-Berlin) entsprach nicht den Anforderungen des Museums zur Erstellung einer Gußform für eine Bronzekleinserie der Statuette. Die zweite Statue, die 'Große Nacht' (1930) ist mit ihrer Größe von 2,12m und aufgrund des durch korrodierende Metallarmierung verursachten Schadensbildes nicht mehr transportfähig. Eine in-situ Untersuchung mit dem mobilen Tomographen, der in den 1980ern zur Untersuchung von Bäumen gebaut und jetzt mit einem modernen Flachdetektor und einer Röntgenröhre ausgestattet ist, wird vorgestellt. Die Möglichkeiten der in-situ CT für große Skulpturen werden anhand der Ergebnisse diskutiert. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Mobile CT KW - Mobile RFA PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (P12) SP - 1 EP - 8 CY - Berlin AN - OPUS4-24695 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten A1 - Meng, Birgit A1 - Brouwers, H.J.H. ED - Aguiar, J. B. ED - Jalali, S. ED - Camoes, A. ED - Ferreira, R.M. T1 - Influence of ambient temperature conditions on the effect of stabilising polymers in cementitious building materials T2 - 13th International Congress on polymers in concrete - ICPIC 2010 CY - Funchal-Madeira, Portugal DA - 2010-02-11 KW - Stabilising agent KW - Polycarboxylate ether KW - Polysaccharides KW - Starch ether KW - Biopolymers KW - Rheology KW - Setting PY - 2010 SN - 978-972-99179-4-3 SP - 241 EP - 248 CY - Funchal-Madeira, Portugal AN - OPUS4-21971 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Wolfram A1 - Brouwers, J. A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Khayat, K. H. ED - Feys, D. T1 - Effects of superplasticizer and viscosity-modifying agent on fresh concrete performance of SCC at varied ambient temperatures N2 - Varying ambient temperatures in plants or on construction sites during casting of SCC can cause serious problems affecting the fresh concrete performances, such as rheological properties and setting time, with consequences for the hardened properties in the structure. By sensible choices of the components, the robustness of SCC mixtures against temperature variations can be improved. However, this aspect has not been the focus of intensive research yet. In this study the effects of varied ambient temperatures on the early performance of differently composed SCC mixtures are investigated, with emphasis on changes in rheology, early deformations, heat evolution and setting. Focus is placed on the study of the influence of the polycarboxylate ether molecule type as well as different viscositymodifying agents on the temperature robustness. Effects on the relevance for practical concrete applications are evaluated, which will provide a reliable framework of possible actions on the appropriate use of admixtures for SCC. T2 - SCC 2010 - 6th International RILEM Symposium on self-compacting concrete / 4th North American conference on the design and use of SCC - Desgin, Production and Placement of self-consolidating concrete CY - Montreal, Canada DA - 2010-09-26 KW - Polycarboxylate KW - Modified starch KW - Rheology KW - Self-compacting concrete KW - Temperature KW - Yield stress KW - Viscosity PY - 2010 SN - 978-90-481-9663-0 DO - https://doi.org/10.1007/978-90-481-9664-7_6 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 1 IS - 2 SP - 65 EP - 77 PB - Springer AN - OPUS4-22126 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten A1 - Meng, Birgit A1 - Brouwers, H.J.H. T1 - Effect of superplasticizer and stabilising agent type on fresh concrete performance of SCC at varied ambient temperatures T2 - SCC2010 6th Int. RILEM Symposium on Self-Compacting Concrete - 4th North American Conference on the Design and Use of SCC CY - Montreal, Canada DA - 2010-09-26 PY - 2010 AN - OPUS4-20855 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Schmidt, Wolfram A1 - Meng, Birgit A1 - Brouwers, H.J.H. T1 - Influence of ambient temperature conditions on the effected of stabilising polymers in cementitious building materials T2 - 13th International Congress on Polymers in Concrete CY - Madeira, Portugal DA - 2010-02-10 PY - 2010 AN - OPUS4-19910 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten T1 - Verbesserung der Verarbeitungseigenschaften fließfähiger Betone bei veränderlichen Temperaturen T2 - Rheologie Workshop und Kolloquium CY - Regensburg, Germany DA - 2010-03-10 PY - 2010 AN - OPUS4-21935 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Möglichkeiten zur Steuerung der Robustheit von selbstverdichtendem Beton gegenüber veränderlichen Umgebungstemperaturen N2 - Selbstverdichtender Beton (SVB) findet kaum Anwendung als Transportbeton. Ein wesentlicher Grund hierfür ist, dass die Außentemperaturen auf der Baustelle nicht gesteuert werden können. Während des Betonierens können allerdings Schwankungen in der Umgebungstemperatur die rheologischen Eigenschaften aber auch das Erstarrungsverhalten signifikant beeinflussen, wodurch in der Folge auch Veränderungen im Festbeton auftreten können. Durch geeignete Wahl der Komponenten kann die Robustheit von SVB gegenüber Einflüssen aus den Umgebungsbedingungen deutlich verbessert werden. In der vorgestellten Arbeit werden anhand von Untersuchungen am Betonrheometer, am Setzfließmaß und am Erstarren nach Vicat die Einflüsse von veränderlichen Umgebungstemperaturen auf die frühen Eigenschaften von SVB dargestellt. Der Fokus liegt auf Effekten, die durch die Modifikation von Polycarboxylatether-Fließmitteln und durch Stabilisierer eingetragen werden. Darüber hinaus wird der Einfluss des Mischungsentwurfes gezeigt. Die Ergebnisse werden mit Relevanz für praktische Betonanwendungen analysiert und es werden die wichtigen Einflussgrößen zur Verbesserung der Robustheit von SVB gegenüber Temperaturschwankungen herausgearbeitet. T2 - DAfStb Doktorandensymposium 2010 - 51. Forschungskolloquium CY - Kaiserslautern, Deutschland DA - 2010-11-11 KW - Selbstverdichtender Beton KW - Erstarren KW - Verarbeitungseigenschaften KW - Rheologie KW - Stabilisierer KW - Fließmittel PY - 2010 VL - 2 IS - Kap. C1 SP - 527 EP - 538 AN - OPUS4-22664 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Möglichkeiten zur Steuerung der Robustheit von selbstverdichtendem Beton gegenüber veränderlichen Umgebungstemperaturen T2 - DAfStb Doktorandensymposium 2010 - 51. Forschungskolloquium CY - Kaiserslautern, Germany DA - 2010-11-11 PY - 2010 AN - OPUS4-22709 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schultze, Karin A1 - Schneider, Rudolf A1 - Weller, Michael G. A1 - Panne, Ulrich T1 - SPE-GC-MS Method for Fecal Sterols in Surface Water T2 - Analytical 2010 CY - Munich, Germany DA - 2010-03-23 PY - 2010 AN - OPUS4-21032 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schwarz, G. A1 - Weller, Michael G. A1 - Weber, R. A1 - Linscheid, M. T1 - Introducing MeCAT with iodine reactivity for cysteine labeling of proteins and peptides T2 - Annual meeting DGMS CY - Halle (Saale), Germany DA - 2010-03-07 PY - 2010 AN - OPUS4-26042 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gopala, Anil A1 - Zellmann, M. A1 - Kipphardt, Heinrich A1 - Jakubowski, Norbert A1 - Panne, Ulrich T1 - Mass spectrometric study of the impurity profile in Zn during reduction-distillation of ZnO with activated and inactivated Al N2 - In this work, we report on the application of hyphenated gas source mass spectrometry to study and understand the mechanism of the reduction-distillation of ZnO using Al powder as reductant in its activated and inactivated form. The experiments revealed that the purity of the Zn metal produced were superior using activated Al with respect to inactivated Al, i.e., m5N8 (99.9998% metallic based) versus m5N3. The achieved purity levels of Zn and the absence of high volatile Cd, Mg, and Sb impurities in the gas phase and the material collected were explained with respect to the impurity elements free-energy values, vapor pressure data, and an observed scavenging effect of the Ta crucible, which was supported by the on-line observed mass spectrometric profiles of the residual gas. PY - 2010 DO - https://doi.org/10.1016/j.jasms.2010.04.009 SN - 1044-0305 VL - 21 IS - 9 SP - 1620 EP - 1623 PB - Elsevier CY - New York, NY AN - OPUS4-21910 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gopala, Anil A1 - Kipphardt, Heinrich A1 - Matschat, Ralf A1 - Panne, Ulrich T1 - Process methodology for the small scale production of m6N5 purity zinc using a resistance heated vacuum distillation system N2 - Ultra high purity Zn (m6N5) was obtained through triple vacuum distillation using an m4N5 Zn as input material. High-volatile impurities were removed from the zinc matrix by vacuum evaporation, while traces having lower volatility than the matrix remained in the residual material after finishing of the entire purification process. The time required for the removal of the main high-volatile impurity (Cd) was monitored using a connected gas source mass spectrometer. During distillation the Zn vapor of the distillate was condensed on the cap of a glassy carbon crucible which was water cooled by a movable copper block. The temperatures were optimized for the removal of the volatiles and for the distillation process using vapor pressure data. High resolution glow discharge mass spectrometry was applied for the analysis and purity evaluation of the distilled and input zinc. The analysis confirmed the reduction of the metallic impurities from 43 mg kg-1 to 0.5 mg kg-1 (m6N5) after three consecutive vacuum distillations. An increase in the grain size and a decrease in the micro-hardness were observed for the purified Zn material. KW - Ultra high purity KW - Vacuum distillation KW - High resolution glow discharge mass KW - Spectrometry KW - Micro-hardness KW - Zinc KW - Purification PY - 2010 DO - https://doi.org/10.1016/j.matchemphys.2010.02.080 SN - 0254-0584 VL - 122 IS - 1 SP - 151 EP - 155 PB - Elsevier CY - Amsterdam AN - OPUS4-21127 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Panne, Ulrich T1 - Analytische Chemie - Wissenschaft oder Dienstmagd T2 - 6. ASAC Junganalytikertreffen CY - Vienna, Austria DA - 2010-06-11 PY - 2010 AN - OPUS4-21538 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schulte, Franziska A1 - Panne, Ulrich A1 - Kneipp, Janina T1 - Molecular changes during pollen germination can be monitored by Raman microspectroscopy N2 - The processes associated with pollen germination were studied in vitro for two tree species, Salix caprea and Fraxinus excelsior under different nutrient conditions. The results provide evidence of changes in chemical composition of the pollen grains during germination. From the comparison of spectra of the pollen grain body and the growing pollen tube, it can be concluded that there are major chemical differences between these two morphological units. Comparison of germinated and ungerminated pollen grains reveals alterations in the metabolism. Composition of the germinating pollen grain and its morphological units depends on the plant species, but also on the nutrient conditions. The results suggest species-specific utilization of metabolite storage, and potential alterations of the pollen outer coat. Furthermore, discharge of molecules into the nutrient medium may depend on the nutrient conditions in the germination experiments. This has implications for further experiments on dynamic processes in pollen and related plant materials. KW - Pollen germination KW - Raman microspectroscopy KW - Imaging KW - Coumaric acid KW - Pollen tube KW - Sporopollenin PY - 2010 DO - https://doi.org/10.1002/jbio.201000031 SN - 1864-063X VL - 3 IS - 8-9 SP - 542 EP - 547 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-23211 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gopala, Anil A1 - Kipphardt, Heinrich A1 - Matschat, Ralf A1 - Panne, Ulrich T1 - Use of mass spectrometric detection as a versatile process monitoring tool: reduction patterns in a milled ZnO/Al mixture N2 - Mass spectrometric detection can play a prominent role in the assessment of different reactions occurring at varied temperatures in a milled ZnO/Al mixture. This is the first time that online mass spectrometric information was used as a tool for monitoring and understanding the chemical reduction process mechanism. We have observed four different types of reaction taking place: (1) distillation of Zn metal, (2) reduction of ZnO by activated Al, (3) melting of Al and finally (4) reduction of ZnO by inactivated Al. The experimental conditions and results observed by QMS were supported with literature data and physical measurement data from X-Ray Diffraction (XRD) which gave us an idea about the complex reaction cascade which occurred during the formation of the zinc metal. PY - 2010 DO - https://doi.org/10.1039/c0ay00057d SN - 1759-9660 SN - 1759-9679 VL - 2 SP - 451 EP - 454 PB - RSC Publ. CY - Cambridge AN - OPUS4-21291 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Panne, Ulrich T1 - Mit Sicherheit vorn - Analytische Chemie im Dienste der technischen Sicherheit und Materialforschung T2 - Institutskolloquium des GKSS Teltow CY - Teltow, Germany DA - 2010-05-27 PY - 2010 AN - OPUS4-21537 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinhardt, F. A1 - Beckhoff, B. A1 - Bresch, Harald A1 - Seeger, Stefan T1 - X-Ray Spectrometry under Grazing Incidence fpr the characterization of Nanoparticles deposited on Flat Surfaces T2 - International Aerosol Conference 2010 CY - Helsinki, Finland DA - 2010-08-29 PY - 2010 AN - OPUS4-21928 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann-Böllinghaus, Anja T1 - Brandsicherheit in Bussen, numerische und experimentelle Untersuchungen T2 - AGS Jahresschlusssitzung CY - Berlin, Germany DA - 2010-12-10 PY - 2010 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. AN - OPUS4-23010 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Monreal, Nils A1 - Hofmann-Böllinghaus, Anja A1 - Krüger, Simone T1 - Quatifizierung von Brandrauch als Grundlage für simulationsbasierte Brandchutz- und Entrauchungskonzepte T2 - Workshop Brandschutzforschung CY - Magdeburg, Germany DA - 2010-10-04 PY - 2010 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. AN - OPUS4-22969 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knaust, Christian A1 - Krause, Ulrich A1 - Hofmann-Böllinghaus, Anja A1 - Schneider, U. T1 - Modeling fire scenarios in buildings with CFD N2 - In the frame of the European harmonization, new European technical standards (Eurocodes) have been developed in recent years. Classical methods, like tables and simplified analytical procedures, as well as general engineering techniques are allowed by the Eurocodes for the fire protection design. The modeling and calculation of fire scenarios with CFD (Computational Fluid Dynamics) numerical methods is one of the general engineering methods. It is nowadays still difficult to check and evaluate the CFD results for their use as technical documents for fire safety design. Analytical engineering techniques, zone models and CFD-models have been used and compared in the present work for the prediction of the fire development in a building. To solve the conservation equation for the CFD-model, the CFD-program FDS, with the mixture fraction model, and the CFD-program FLUENT, with the one step reaction model as well as with the volumetric source term model, have been used. The combustion of polyurethane is modeled in FDS by specifying the heat release rate and the stoichiometry. For the combustion in volumetric source term model, the heat release rate and the smoke release were specified with respect to the stoichiometry. The input parameter for the one step reaction model is the pyrolysis mass flow. In the one step reaction model, the transport equations for polyurethane, H₂O, N₂, O₂, CO₂, CO and C (soot) are solved and the heat of combustion is determined from the standard formation enthalpy of all the components. In volumetric source term model, the transport equation is solved for air and smoke. FDS solves the transport equation for the mixture fraction. To model the fire development, and where no literature data was available, the required material characteristics like specific heat capacity, absorption coefficient and heat of combustion were measured. In all the investigated CFD-models the heat- and species transport equation has been solved and the absorption coefficient of soot has been considered. Furthermore, the fire development has also been investigated using zone models with the programs CFAST and MRFC. Results from analytical engineering techniques (plume calculations), which were design criteria in the past, have been used as plausibility checks for the present work. The calculation results from the investigations were compared to measurements in the same building performed by the National Institute for Standards and Technology (NIST). T2 - 11th International Symposium on Fire Protection CY - Leipzig, Germany DA - 08.06.2010 KW - CFD KW - Computational fluid dynamics KW - Zone model KW - Analytical technique KW - Combustion KW - Soot model KW - FLUENT KW - FDS KW - CFAST KW - MRFC KW - Measurements PY - 2010 SN - 978-3-00-03966-2 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. SP - 1 EP - 14 PB - Vereinigung zur Förderung des Deutschen Brandschutzes (vfdb) CY - Münster AN - OPUS4-23159 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf A1 - Bremser, Wolfram A1 - Resch-Genger, Ute T1 - Design-of-Experiment approach in optimization, validation and uncertainty assessment of hapten immunoassays T2 - Pacifichem CY - Honolulu, HI, USA DA - 2010-12-15 PY - 2010 AN - OPUS4-22859 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf A1 - Kuhne, Maren A1 - Wagner, Sascha A1 - Schenk, Jonas A1 - Kunte, Hans-Jörg A1 - Resch-Genger, Ute T1 - Flow Cytometry (FACS) for characterization and sorting of murine B cells to advance development of monoclonal antibodies T2 - Pacifichem CY - Honolulu, HI, USA DA - 2010-12-15 PY - 2010 AN - OPUS4-22858 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pannenbecker, Kirsten A1 - Bahlmann, Arnold A1 - Schneider, Rudolf T1 - Untersuchungen zum Vorkommen von Carbamzepin im Berliner Wasserkreislauf mittels ELISA T2 - Waser 2010, Jahrestagung der Wasserchemischen Gesellschaft CY - Bayreuth, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21549 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grandke, Julia A1 - Resch-Genger, Ute A1 - Schneider, Rudolf T1 - Development of different immunoassay formats and measurement uncertainty T2 - Tag der Chemie CY - Berlin, Germany DA - 2010-06-16 PY - 2010 AN - OPUS4-21551 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Santos, S. A1 - Costa, C. A. E. A1 - Duarte, A. C. A1 - Scherer, H. W. A1 - Schneider, Rudolf A1 - Esteves, V. I. A1 - Santos, E. B. H. T1 - Influence of different organic amendments on the potential availability of metals from soil: A study on metal fractionation and extraction kinetics by EDTA N2 - The effects of long-term application of different organic amendments, as compared to mineral fertilizer, on Zn, Cu and Pb content and leachability in a luvisol derived from loess were assessed. The organic fertilizers, applied since 1962, were compost (COM) – from green organic household waste, sewage sludge (SLU) – from municipal water treatment facilities, farmyard manure (FYM) and the doses applied since 1997 were 90 t ha-1, 10 t ha-1 and 9 t ha-1, once in 3 years, respectively. The kinetics of metals extraction with 0.05 mol dm-3 EDTA at pH 6.0 has been studied. The two first-order reactions model was fitted to the kinetic data and allowed to distinguish two pools for each metal: a 'labile' fraction (Q1), quickly extracted with a rate constant k1, and a 'moderately labile' fraction (Q2), more slowly extracted, with a rate constant k2. Simultaneously, the pseudo-total metal contents in the soil samples were determined after digestion with aqua regia (3:1 HCl + HNO3). The obtained parameters Q1, k1, Q2, k2, for the kinetics of extraction of each metal in the three replicates of each fertilization mode, as well as the pseudo-total metal contents, were statistically analysed. COM and SLU application resulted in an increase of the total contents of Pb, Zn and Cu in soil. Further, the percentage of labile Zn and Pb also increased in consequence of the application of those amendments, particularly COM. The increase was more noticeable for Zn. FYM, despite not increasing the total content of Pb, Zn or Cu, did also have an effect on the leachability of Zn and Pb, increasing their labile fraction in soil. These results point to a potential risk of increasing metals mobility in soil, mainly Zn, associated to the use of organic amendments, particularly COM or SLU. KW - Compost KW - Sewage sludge KW - Soils KW - Metal mobility KW - EDTA KW - Kinetics PY - 2010 DO - https://doi.org/10.1016/j.chemosphere.2009.11.008 SN - 0045-6535 SN - 0366-7111 VL - 78 IS - 4 SP - 389 EP - 396 PB - Elsevier Science CY - Kidlington, Oxford AN - OPUS4-22187 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Martínez, N.A. A1 - Schneider, Rudolf A1 - Messina, G.A. A1 - Raba, J. T1 - Modified paramagnetic beads in a microfluidic system for the determination of ethinylestradiol (EE2) in river water samples N2 - In this work, we have developed and characterized a novel microfluidic immunoassay methodology for rapid and sensitive quantification of ethinylestradiol (EE2) in river water samples. The detection of EE2 was carried out using a competitive direct immunoassay method based on the use of anti-EE2 polyclonal antibodies immobilized on magnetic microspheres 3-aminopropyl-modified manipulated for an external removable magnet. The EE2 present in the water sample was allowed to compete with EE2-horseradish peroxidase (HPR) conjugated for the immobilized anti-EE2 antibody. The HPR, in the presence of hydrogen peroxide (H2O2) catalyzes the oxidation of catechol (Q) whose back electrochemical reduction was detected on gold electrode at 0.0 V. The response current obtained from the product of enzymatic reaction is inversely proportional to the amount of EE2 in the water sample. The electrochemical detection can be done within 1 min and total assay time was 30 min. The calculated detection limits for electrochemical detection and the ELISA procedure are 0.09 and 0.32 ng L-1 respectively and the intra- and inter-assay coefficients of variation were below 5.8%. Our electrochemical immunosensor showed higher sensitivity and lower time consumed than the standard spectrophotometric detection ELISA method, which shows the potential for assessment of EE2 in river water samples. KW - Enzyme immunoassays KW - Ethinylestradiol KW - Paramagnetic beads KW - Horseradish peroxidase KW - Microfluidic KW - Flow injection analysis PY - 2010 DO - https://doi.org/10.1016/j.bios.2009.10.031 SN - 0956-5663 SN - 1873-4235 VL - 25 IS - 6 SP - 1376 EP - 1381 PB - Elsevier CY - Barking, Essex, UK AN - OPUS4-22188 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lima, D.L.D. A1 - Schneider, Rudolf A1 - Scherer, H.W. A1 - Duarte, A.C. A1 - Santos, E.B.H. A1 - Esteves, V.I. T1 - Sorption-desorption behavior of atrazine on soils subjected to different organic long-term amendments N2 - Sorption of atrazine on soils subjected to three different organic amendments was measured using a batch equilibrium technique. A higher KF value (2.20 kg-1(mg L-1)-N) was obtained for soil fertilized with compost, which had a higher organic matter (OM) content. A correlation between the KFOC values and the percentage of aromatic carbon in OM was observed. The highest KFOC value was obtained for the soil with the highest aromatic content. Higher aromatic content results in higher hydrophobicity of OM, and hydrophobic interactions play a key role in binding of atrazine. On the other hand, the soil amended with farmyard manure had a higher content of carboxylic units, which could be responsible for hydrogen bonding between atrazine and OM. Dominance of hydrogen bonds compared to hydrophobic interactions can be responsible for the lower desorption capacity observed with the farmyard manure soil. The stronger hydrogen bonding can reduce the leaching of atrazine into drinking water resources and runoff to rivers and other surface waters. KW - Capillary electrophoresis KW - Atrazine KW - Sorption KW - Soil KW - Compost KW - Sewage sludge KW - Farmyard manure PY - 2010 DO - https://doi.org/10.1021/jf903937d SN - 0021-8561 SN - 1520-5118 VL - 58 IS - 5 SP - 3101 EP - 3106 PB - American Chemical Society CY - Columbus, Ohio AN - OPUS4-21108 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Filipe, O.M.S. A1 - Vidal, M.M. A1 - Scherer, H.W. A1 - Schneider, Rudolf A1 - Duarte, A. A1 - Esteves, V.I. A1 - Santos, E.B.H. T1 - Effect of long term organic amendments on adsorption-desorption of thiram onto a luvisol soil derived from loess KW - Thiram KW - Adsorption-desorption KW - Soil KW - Organic amendments PY - 2010 DO - https://doi.org/10.1016/j.chemosphere.2010.04.003 SN - 0045-6535 SN - 0366-7111 VL - 80 IS - 3 SP - 293 EP - 300 PB - Elsevier Science CY - Kidlington, Oxford AN - OPUS4-23196 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalies, G. A1 - Rockmann, R. A1 - Tuma, Dirk A1 - Arnrich, S. A1 - Bräuer, P. T1 - Reliable information on solids from liquid-Phase adsorption N2 - For the characterization of disperse and porous solids, usually single gas adsorption(GA) is employed. In the case of liquid adsorption (LA), the extraction of information on solids immediately becomes a more sophisticated matter since information on geometric as well energetic parameters of the solids is both superposed by liquid-mixture effects and displayed in excess terms. We have to ask if reliable solid parameters can be also obtained from LA isotherms. The enlarged data bank of gas and liquid adsorption measurements enables us to change systematically solid parameters (e.g., the pore width of MCM-41, the pore entrances of SBA-16, chemical heterogeneity) and to study in this way the influence of solid parameters on LA. T2 - The FOA 10, 10th International Conference on Fundamentals of Adsorption CY - Awaji Island, Japan DA - 23.05.2010 KW - porous solids KW - gas adsorption KW - excess isotherms PY - 2010 AN - OPUS4-35945 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gopala, Anil A1 - Jakubowski, Norbert A1 - Panne, Ulrich A1 - Kipphardt, Heinrich T1 - Real time monitoring of chemical transformations during catalytic reduction using gas source mass spectrometry: carbon/zinc carbonate hydroxide N2 - We report herein the utilization of a vacuum reduction distillation system (VRDS) coupled with mass spectrometry (MS) to characterize chemical transformations in thermal analysis. The system initially designed to monitor metal purification by distillation is applied for the first time to the catalytic reaction of in situ formed nickel oxide during the carbothermic reduction of zinc oxide. PY - 2010 DO - https://doi.org/10.1039/c004179c SN - 0267-9477 SN - 1364-5544 VL - 25 SP - 1378 EP - 1380 PB - Royal Society of Chemistry CY - London AN - OPUS4-21911 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Walter, Astrid A1 - Pfeifer, Dietmar A1 - Kraus, Werner A1 - Emmerling, Franziska A1 - Schneider, Rudolf A1 - Panne, Ulrich A1 - Weller, Michael G. T1 - Triacetone Triperoxide (TATP): Hapten design and development of antibodies N2 - Triacetone triperoxide (TATP), an improvised explosive, is a potential security threat because of its cost-efficient synthesis and the difficulty in detecting it. A highly selective antibody could provide the necessary specificity to the detection process. To obtain antibodies, a hapten made from acetone, hydrogen peroxide, and 7-oxooctanoic acid has been designed, synthesized, and confirmed by NMR that displays the utmost similarity to the analyte. The single-crystal X-ray structures of the solvated species TATP·methanol (1:1) and the TATP derivate were determined. In both compounds, the molecules exhibit D3 symmetry and adopt a twisted boat-chair conformation. The hapten was coupled to bovine serum albumin, and mice were immunized. An immune response against TATP was elicited, and selective antibodies were detected in the mouse serum, which should be very useful for the development of a TATP biosensor system. An ELISA with a limit of detection for TATP of 65 µg L-1 is shown. KW - TATP KW - Triacetone triperoxide KW - Explosive KW - Antibody KW - Hapten immunoassay KW - Structure PY - 2010 DO - https://doi.org/10.1021/la1018339 SN - 0743-7463 SN - 1520-5827 VL - 26 IS - 19 SP - 15418 EP - 15423 PB - American Chemical Society CY - Washington, DC AN - OPUS4-22469 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Chobanov, K. A1 - Tuma, Dirk A1 - Maurer, G. ED - Renon, H. T1 - High-pressure phase behavior of ternary systems (carbon dioxide + alkanol + hydrophobic ionic liquid) N2 - Some homogeneous liquid mixtures of an ionic liquid and a lower alkanol (e.g., methanol) can be forced to undergo a liquid–liquid phase split (resulting in a three-phase liquid–liquid–vapor (L1L2V) equilibrium) by pressurization with a gas. Such systems exhibit the phenomenon of "salting out by a nearcritical gas". That phenomenon is often observed at temperatures around the critical temperature of the gas in liquid mixtures where at least one of the liquid components is a good solvent for that gas. New experimental results for both the L1L2V equilibrium and the corresponding critical endpoint lines of the two ternary systems (carbon dioxide + methanol + 1-n-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF6]) and (carbon dioxide + 1-butanol + 1-n-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide [hmim][Tf2N]) at temperatures between 293 and 333 K are reported. The experiments were performed with an "analytical method". The liquid–liquid phase split exists only at pressures between a lower critical endpoint line (where both liquid phases become critical and coexist with a vapor phase) and an upper critical endpoint line (where one of the phases becomes critical with the vapor phase while the critical phases coexist with another liquid phase). The compositions of the coexisting three phases L1, L2, and V differ considerably; a high-density, ionic liquid-rich liquid phase (L1) coexists with an alkanol-rich liquid phase (L2) of lower density and a vapor phase (V) that is virtually ionic liquid-free. For both systems, it was observed that, at constant temperature, increasing pressure shifts the L1 phase towards higher contents of ionic liquid and gas and less alkanol, whereas in the L2 phase the mole fractions of ionic liquid and alkanol decrease. Higher temperatures result in a smaller difference between the pressures of both critical endpoint lines. Experimental results for both critical endpoint lines and for the compositions of the coexisting liquid phases are reported. KW - Room-temperature ionic lilquids KW - [bmim][PF6] and [hmim][Tf2N] KW - Alkanol KW - Carbon dioxide KW - High-pressure phase equilibria KW - Salting-out behavior KW - Critical endpoints PY - 2010 DO - https://doi.org/10.1016/j.fluid.2010.02.015 SN - 0378-3812 VL - 294 IS - 1-2 SP - 54 EP - 66 PB - Elsevier CY - Amsterdam AN - OPUS4-22060 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Solomun, Tihomir A1 - Mix, Renate A1 - Sturm, Heinz T1 - Immobilization of silanized DNA on glass: influence of the silane tether on the DNA hybridization N2 - Two trifunctional (trimethoxy and triethoxy) and one difunctional (methyldimethoxy) 3-mercaptopropyl-alkoxysilanes were covalently tethered to thiolated DNA oligonucleotides in solution. After deposition as microarrays onto glass, the immobilized DNA probes were tested for hybridization ability by a florescence-based method. The results demonstrate a large enhancement in the fluorescence signal when the functionality of the silane tether is reduced from three to two. An XPS analyses revealed that this is not due to a higher DNA surface density. FTIR spectra of the spin-coated silanes showed that the trifunctional silanes form branched and cyclic siloxane moieties, whereas the difunctional silane generates predominantly short straight siloxane chains. Therefore, the propensity of trifunctional silanes to form more complex networks leads to conformations of the bound DNA which are less favorable for the specific interaction with the complementary strand. The data implicate that further significant improvements in the DNA hybridization ability are possible by adroit choice of the silane system. KW - Silanized DNA KW - DNA immobilization KW - DNA hybridization KW - Fluorescence imaging KW - FTIRS KW - XPS PY - 2010 DO - https://doi.org/10.1021/am100263t SN - 1944-8244 SN - 0013-936X SN - 1944-8252 VL - 2 IS - 8 SP - 2171 EP - 2174 PB - ACS Publ. CY - Washington, DC, USA AN - OPUS4-22614 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalies, G. A1 - Rockmann, R. A1 - Tuma, Dirk A1 - Gapke, J. T1 - Ordered mesoporous solids as model substances for liquid adsorption N2 - Two different ordered mesoporous solids, a hexagonal SBA-15 silica sample and its inverse CMK-3 carbon structure were applied in liquid-phase adsorption. By means of the analysis of experimental data of a binary liquid model mixture with one polar and one non-polar component, the general way is outlined how to obtain essential and trustworthy solid information from liquid-phase adsorption. KW - Adsorption excess isotherm KW - Ordered mesoporous solid KW - Binary liquid mixture KW - Thermodynamics KW - Solid heterogeneity PY - 2010 DO - https://doi.org/10.1016/j.apsusc.2009.12.091 SN - 0169-4332 SN - 1873-5584 VL - 256 IS - 17 SP - 5395 EP - 5398 PB - North-Holland CY - Amsterdam AN - OPUS4-22064 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ulanova, T. A1 - Tuma, Dirk A1 - Maurer, G. T1 - High-pressure multiphase behavior of the ternary systems (ethene + water + acetone) and (ethane + water + acetone) KW - Ionische Flüssigkeiten KW - Phasengleichgewichte KW - Mischphasenthermodynamik PY - 2010 DO - https://doi.org/10.1021/je100609r SN - 0021-9568 VL - 55 IS - 10 SP - 4450 EP - 4462 PB - Soc. CY - Washington, DC, USA AN - OPUS4-22066 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sturm, Heinz A1 - Tavares, Luciana A1 - Kjelstrup-Hansen, J. A1 - Rubahn, H.-G. T1 - Reducing bleaching in organic nanofibers by bi-layer polymer/oxide coating T2 - 10. International Conference on "Nanostructured Material" (NANO 2010) CY - Rome, Italy DA - 2010-09-13 PY - 2010 AN - OPUS4-21952 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tuma, Dirk A1 - Maurer, G. A1 - Chobanov, K. T1 - High-pressure gas solubility and associated phase equilibria in systems with ionic liquids 14. - 19.03.2010, T2 - EUCHEM Conference on MOlten Salts and Ionic Liquids 2010 CY - Bamberg, Germany DA - 2010-03-14 PY - 2010 AN - OPUS4-21583 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sturm, Heinz T1 - Rasterkraftmikroskopische Verfahren zur Beschreibung der Grenzflächen in Polymer-Kompositwerkstoffen T2 - Konferenz: Nanotechnologie für Faserkunststoffverbunde CY - Braunschweig, Germany DA - 2010-05-26 PY - 2010 AN - OPUS4-21616 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sturm, Heinz T1 - Von makroskopischen Fragestellungen und mikroskopischen Untersuchungsmethoden in der Tribologie T2 - Kolloquium "Synergie von Werkstoff- und Prozesstechnik" CY - Berlin, Germany DA - 2010-06-04 PY - 2010 AN - OPUS4-21617 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tavares, L. A1 - Kjelstrup-Hansen, J. A1 - Rubahn, H.-G. A1 - Sturm, Heinz T1 - Reduced bleaching in organic nanofibers by bilayer polymer/oxide coating N2 - Para-hexaphenylene (p-6P) molecules exhibit a characteristic photoinduced reaction (bleaching) resulting in a decrease in luminescence intensity upon UV light exposure, which could render the technological use of the nanofibers problematic. In order to investigate the photoinduced reaction in nanofibers, optical bleaching experiments have been performed by irradiating both pristine and coated nanofibers with UV light. Oxide coating materials (SiOx and Al2O3) were applied onto p-6P nanofibers. These treatments caused a reduction in the bleaching reaction but in addition, the nanofiber luminescence spectrum was significantly altered. It was observed that some polymer coatings [a statistical copolymer of tetrafluoroethylene and 2,2-bis-trifluoromethyl-4,5-difluoro-1,3-dioxole, P(TFE-PDD), and poly(methyl methacrylate), PMMA] do not interfere with the luminescence spectrum from the p-6P but are not effective in stopping the bleaching. Bilayer coatings with first a polymer material, which should work as a protection layer to avoid modifications of the p-6P luminescence spectrum, and second an oxide layer used as oxygen blocker were tested and it was found that a particular bilayer polymer/oxide combination results in a significant reduction in bleaching without affecting significantly the emission spectrum from the nanofibers. KW - Nanofibers KW - Photobleaching KW - Polymer coating KW - Oxide coating PY - 2010 DO - https://doi.org/10.1063/1.3427561 SN - 0021-8979 SN - 1089-7550 VL - 107 SP - 103521-1 - 103521-6 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-21574 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bonse, Jörn A1 - Bachelier, G. A1 - Wiggins, S. M. A1 - Siegel, J. A1 - Solis, J. A1 - Krüger, Jörg A1 - Sturm, Heinz T1 - Femtosecond laser ablation of indium phosphide in air: dynamical, structural and morphological evolution N2 - The irradiation of single-crystalline indium phosphide (c-InP) by Ti:sapphire femtosecond laser pulses (130 fs, 800 nm) in air is studied by means of in-situ time resolved reflectivity measurements [fs-time-resolved microscopy (100 fs-10 ns) and point probing analysis (ns - µs)] and by complementary ex-situ surface analytical methods (Micro Raman Spectroscopy, Scanning Force, and Optical Microscopy). The dynamics of melting, ablation, and optical breakdown as well as structural changes resulting from rapid solidification are investigated in detail. Different laser-induced surface morphologies are characterized and discussed on the basis of recent ablation and optical breakdown models. KW - Femtosecond laser ablation KW - Optical breakdown KW - Time-resolved measurements KW - Semiconductor KW - Indium phosphide PY - 2010 SN - 1454-4164 VL - 12 IS - 3 SP - 421 EP - 426 PB - INOE & INFM CY - Bucharest AN - OPUS4-21082 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kovalev, Alexander A1 - Myshkin, N. A1 - Sturm, Heinz T1 - Influence of adhesion interaction between rough surfaces on real contact area formation T2 - Frühjahrstagung der Deutschen Physikalischen Gesellschaft CY - Regensburg, Germany DA - 2010-03-21 PY - 2010 AN - OPUS4-23596 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalies, G. A1 - Tuma, Dirk A1 - Rockmann, R. A1 - Arnrich, S. A1 - Brauer, P. T1 - Reliable Information on Solids from Liquid-Phase Adsorption T2 - 10 th International Conference on Fundamentls of Adsorption CY - Awaji Island, Japan DA - 2010-05-23 PY - 2010 AN - OPUS4-22670 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Giesen, Charlotte A1 - Jakubowski, Norbert A1 - Panne, Ulrich A1 - Weller, Michael G. T1 - Comparison of ICP-MS and photometric detection of an immunoassay for the determination of ochratoxin A in wine N2 - An immunoassay was developed for ochratoxin A (OTA) detection in wine and two completely different detection methods were compared: ICP-MS and photometry. For labelling, we applied secondary antibodies conjugated with gold nanoparticles for ICP-MS and with horseradish peroxidase for photometric detection, respectively. Detection limits of the assay were determined as 0.003 µg L-1 for both detection methods. OTA in wine was determined below the EU limit value of 2 µg kg-1. The measurement range was between 0.01 and 1 µg L-1 for ICP-MS and photometric detection. Assay precision detected by ICP-MS and photometry were similar showing that precision of the detection method has only a minor effect on total assay precision. By using BSA as a buffer additive to minimize nonspecific binding, we could also confirm that OTA strongly binds to BSA. In a comparison study of several additives, casein was found to be preferable. PY - 2010 DO - https://doi.org/10.1039/c0ja00009d SN - 0267-9477 SN - 1364-5544 VL - 25 IS - 10 SP - 1567 EP - 1572 PB - Royal Society of Chemistry CY - London AN - OPUS4-22704 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Philipp, Rosemarie A1 - Schiel, D. A1 - Cabilic, J. A1 - Goenaga-Infante, H. A1 - Emteborg, H. A1 - Buzoianu, M. A1 - Milacic, R. A1 - Sainio, P. A1 - Cankur, O. A1 - Duffek, A. A1 - Pröfrock, D. A1 - Win, Tin A1 - Piechotta, Christian A1 - Nehls, Irene A1 - Panne, Ulrich T1 - Traceable measurements for monitoring critical pollutants under the European Water Framework Directive (WFD) 2000/60/EC T2 - EMRP Review Conference CY - Budapest, Hungary DA - 2010-11-22 PY - 2010 AN - OPUS4-22422 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tiebe, Carlo A1 - Hübert, Thomas A1 - Koch, B. A1 - Ritter, U. A1 - Stephan, Ina T1 - Investigation of gaseous metabolites from moulds by ion mobility spectrometry (IMS) and gas chromatography-mass spectrometry (GC-MS) N2 - The metabolism of moulds results in the formation of various microbial volatile organic compounds (MVOCs). These substances can be used as an indicator for the presence of moulds in the indoor environment. Three different mould strains were cultivated on culture media and IMS spectra of gaseous mould metabolites were recorded using a portable mini system with a tritium source and a 5 cm drift cell. The headspace spectra are characteristic for mould species and their age. Typical gaseous components of the metabolites were identified and compared with results obtained from gas chromatography using a mass spectrometer detector. It was observed that the MVOCs formation depends on mould species and their growing stage with a maximum of MVOCs emission occurring during the first 10 days. These preliminary results show that IMS can be applied to detect MVOCs in indoor environment and indicate hidden mould growth. KW - Mould detection KW - MVOC KW - Biochemical sensor system KW - Ion mobility spectrometry KW - IMS KW - Gas chromatography KW - Mass spectrometry KW - Principal component analysis PY - 2010 DO - https://doi.org/10.1007/s12127-009-0035-8 SN - 1435-6163 VL - 13 IS - 1 SP - 17 EP - 24 PB - Springer CY - Berlin; Heidelberg AN - OPUS4-21234 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Henrichsen, H. A1 - Sturm, Heinz A1 - Boggild, P. A1 - Hansen, O. T1 - Submicron organic nanofiber devices with different anode-cathode materials: A simple approach N2 - The authors present a simple general method for simultaneously producing tens of submicron electrode gaps with different cathode and anode materials on top of nanofibers, nanowires, and nanotubes, with an optional gap size variation. Using this method, an ensemble of para-hexaphenylene (p6P) nanofiber devices of different length was fabricated with Sm and Au electrodes. The measured I-V characteristics are in agreement with a nonlinear hopping transport model, where domain barriers dominate the transport with an estimated domain size of 23±5 nm. KW - Nanofibers KW - Sub-micron electrode KW - Para-hexaphenylene KW - Samarium KW - Gold KW - I/V-characteristics KW - Nanolasers KW - Domain barriers PY - 2010 DO - https://doi.org/10.1116/1.3431088 SN - 1071-1023 SN - 0734-211X VL - 28 IS - 3 SP - 617 EP - 622 PB - American Institute of Physics CY - New York, NY AN - OPUS4-21573 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sturm, Heinz ED - Czichos, Horst ED - Habig, K.-H. T1 - Messtechnik der Mikro- und Nanoskala PY - 2010 SN - 978-3-8348-1810-2 SP - 1 EP - 18 PB - Springer-Vieweg CY - Wiesbaden AN - OPUS4-21576 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Klimakow, Maria A1 - Leiterer, Jork A1 - Kneipp, Janina A1 - Rössler, E. A1 - Panne, Ulrich A1 - Rademann, K. A1 - Emmerling, Franziska T1 - Combined synchrotron XRD/Raman measurements: In situ identification of polymorphic transitions during crystallization processes N2 - A combination of two analytical methods, time-resolved X-ray diffraction (XRD) and Raman spectroscopy, is presented as a novel tool for crystallization studies. An acoustic levitator was employed as sample environment. This setup enables the acquisition of XRD and Raman data in situ simultaneously within a 20 s period and hence permits investigation of polymorphic phase transitions during the crystallization process in different solvents (methanol, ethanol, acetone, dichloromethane, acetonitrile). These real time measurements allow the determination of the phase content from the onset of the first crystalline molecular assemblies to the stable system. To evaluate the capability of this approach, the setup was applied to elucidate the crystallization process of the polymorphic compound nifedipine. The results indicate the existence of solvent-dependent transient phases during the crystallization process. The quality of the data allowed the assignment of the lattice constants of the hitherto unknown crystal structure of the β-polymorph. KW - Synchrotron radiation KW - XRD KW - Raman spectroscopy KW - Polymorphism KW - Crystallization KW - Acoustic levitation KW - Nifedipine PY - 2010 DO - https://doi.org/10.1021/la100540q SN - 0743-7463 SN - 1520-5827 VL - 26 IS - 13 SP - 11233 EP - 11237 PB - American Chemical Society CY - Washington, DC AN - OPUS4-21396 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Herwig, Nadine T1 - Isotopenanalytik zur Bestimmung des Einflusses der Ernährung auf die Isotopenzusammensetzung in Rinderproben N2 - Informationen über die Herkunft von Lebensmitteln und ihre Produktionsbedingungen haben einen hohen Stellenwert. Ein viel versprechender Ansatz zur Gewinnung solcher Information ist die Analyse von Isotopenverhältnissen. In dieser Arbeit wurde der Zusammenhang zwischen den Isotopenverhältnissen 13C/12C, 15N/14N, 26Mg/24Mg und 87Sr/86Sr in Rinderproben (Milch, Urin) und den entsprechenden Isotopenverhältnissen im Futter untersucht. Es zeigte sich, dass alle vier untersuchten Isotopenverhältnisse in den Rinderproben von der Isotopenzusammensetzung des Futters abhängig sind. Ein Vorteil der Bestimmung der Isotopenverhältnisse von Strontium und Magnesium ist dabei, dass diese direkt das Isotopenverhältnis der aufgenommenen Nahrung reflektieren, da anders als bei den Kohlenstoff- und Stickstoffisotopenverhältnissen keine Isotopenfraktionierung im Rinderorganismus auftritt. Aus der in dieser Arbeit durchgeführten Fütterungsstudie geht hervor, dass ein Futterwechsel bereits innerhalb von 10 Tagen anhand der δ13C-Werte in der Milch und im Urin nachvollzogen werden kann. Bei den δ15N-Werten wurde eine veränderte Futterzusammensetzung lediglich im Rinderurin nach 49 Tagen sichtbar. Bei der Probenuntersuchung von Rindern aus zwei verschieden Standorten (Berlin und Göstling/Österreich), die darüber hinaus auch mit unterschiedlichen Futterzusammensetzungen ernährt wurden, stellte sich heraus, dass anhand der 15N/14N- und 26Mg/24Mg-Isotopenverhältnisse keine Unterschiede erkennbar sind. Der deutlichste Bezug zur Art der aufgenommenen Nahrung konnte dagegen in den Rinderproben für die Kohlenstoffisotope festgestellt werden. Selbst minimale Unterschiede im Futter ließen sich in den δ13C-Werten der Proben feststellen. Dadurch, dass regional sehr verschiedene Fütterungen bestehen, können bei unterschiedlichen δ13C-Werten des aufgenommenen Futters Proben von Rindern unterschiedlicher Herkunft unterschieden werden. Die Analyse der Strontiumisotopenverhältnisse zeigte darüber hinaus, dass zwischen den Rinderproben aus Berlin und Göstling aufgrund der unterschiedlichen geologischen Gegebenheiten ebenfalls signifikante Unterschiede sowohl in den Futtermitteln als auch in den Rinderproben nachweisbar sind. Die Kohlenstoff- und Strontiumisotopenverhältnisse ermöglichten demnach die bestmögliche Unterscheidung zwischen den Rinderproben aus unterschiedlichen Standorten. Zum Teil konnten hiermit auch Indizien für die unterschiedliche Form der Tierhaltung (konventionelle bzw. ökologische Tierhaltung) abgeleitet werden. N2 - Information about the origin of food and associated production systems has a high significance for food control. An extremely promising approach to obtain such Information is the determination of isotope ratios of different elements. In this study the correlation of the isotope ratios 13C/12C, 15N/14N, 26Mg/24Mg, and 87Sr/86Sr in bovine samples (milk and urine) and the corresponding isotope ratios in feed was investigated. It was shown that in the bovine samples all four isotope ratios correlate with the isotope composition of the feed. The isotope ratios of strontium and magnesium have the advantage that they directly reflect the isotope ratios of the ingested feed since there is no isotope fractionation in the bovine organism which is in contrast to the case of carbon and nitrogen isotope ratios. From the present feeding study it is evident, that a feed change leads to a significant change in the δ13C values in milk and urine within 10 days already. For the δ15N values the feed change was only visible in the bovine urine after 49 days. Investigations of cows from two different regions (Berlin/Germany and Göstling/Austria) kept at different feeding regimes revealed no differences in the 15N/14N and 26Mg/24Mg isotope ratios. The strongest correlation between the isotope ratio of the bovine samples and the kind of ingested feed was observed for the carbon isotope ratio. With this ratio even smallest differences in the feed composition were traceable in the bovine samples. Since different regions usually coincide with different feeding regimes, carbon isotope ratios can be used to distinguish bovine samples from different regions if the δ13C values of the ingested feed are different. Furthermore, the determination of strontium isotope ratios revealed significant differences between bovine and feed samples of Berlin and Göstling due to the different geologic realities. Hence the carbon and strontium isotope ratios allow the best discrimination between bovine samples of different locations. In some cases these ratios even show indications for the production system (conventional and organic cattle breeding). T3 - BAM Dissertationsreihe - 62 KW - Massenspektrometrie KW - Stabile Isotope KW - Milch KW - Urin KW - Rinderfütterung PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-960 SN - 978-3-9813550-5-5 SN - 1613-4249 VL - 62 SP - 1 EP - 167 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-96 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Balski, Matthias A1 - Kipphardt, Heinrich A1 - Jakubowski, Norbert A1 - Panne, Ulrich T1 - Bestimmung von Spurenverunreinigungen in Solarsilicium T2 - 9. Symposium Massenspektrometrische Verfahren der Elementspurenanalyse, 22. ICP-MS Anwendertreffen CY - Berlin, Germany DA - 2010-09-06 PY - 2010 AN - OPUS4-21988 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gusarova, Tamara A1 - Hofmann, T. A1 - Kipphardt, Heinrich A1 - Venzago, C. A1 - Matschat, Ralf A1 - Panne, Ulrich T1 - Comparison of different calibration strategies for the analysis of zinc and other pure metals by using the GD-MS instruments VG 9000 and element GD N2 - Synthetic pressed metal powder standards doped with standard solutions were used for the calibration of both commercially available high resolution GD-MS instruments Element GD and VG 9000 for zinc matrix. Different quantification procedures (IBR, Standard RSF, matrix matched RSF from the calibration with CRMs and use of doped synthetic standards) are compared using zinc matrix as an example, whereas the calibration with doped pellets turned out to be the best quantification technique for high-purity materials. The applicability of the Standard RSF concept is scrutinised. In this context, RSF values for several Matrices (Co, Cu, Fe, In and Zn) are reported additionally. PY - 2010 DO - https://doi.org/10.1039/b921649a SN - 0267-9477 SN - 1364-5544 VL - 25 SP - 314 EP - 321 PB - Royal Society of Chemistry CY - London AN - OPUS4-22376 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bahlmann, Arnold A1 - Weller, Michael G. A1 - Panne, Ulrich A1 - Schneider, Rudolf T1 - Seasonal variations of carbamazepine and cetrizine in Teltowkanal, Berlin, monitored by a dualanalyte immunoassay T2 - 3rd EuCheMS Chemistry Congress CY - Nuremberg, Germany DA - 2010-08-29 PY - 2010 AN - OPUS4-22069 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rudtsch, S. A1 - Gusarova, Tamara A1 - Aulich, A. A1 - Fahr, M. A1 - Fischer, J. A1 - Kipphardt, Heinrich A1 - Matschat, Ralf A1 - Panne, Ulrich T1 - Procedure for the Impurity-related correction at the Indium Fixed Point T2 - TEMPMEKO 2010 CY - Portorož, Slovenia DA - 2010-05-31 PY - 2010 AN - OPUS4-20381 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Chinthalapati, Siva Kesava Raju A1 - Cossmer, Antje A1 - Scharf, Holger A1 - Panne, Ulrich A1 - Lück, Detlef T1 - Speciation of gadolinium based MRI contrast agents in environmental water samples using hydrophilic interaction chromatography hyphenated with inductively coupled plasma mass spectrometry KW - HPLC-ICP-MS KW - HILIC chromatography KW - Speciation KW - Gadolinium KW - MRI contrast agent PY - 2010 DO - https://doi.org/10.1039/b919959d SN - 0267-9477 SN - 1364-5544 VL - 25 SP - 55 EP - 61 PB - Royal Society of Chemistry CY - London AN - OPUS4-20705 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar A1 - Emmerling, Franziska A1 - Müller, Urs A1 - Panne, Ulrich T1 - Time- and space-resolved investigations of cementitious materials by X-Ray diffraction methods T2 - The 20th general meetng of the international mineralogical association (IMA) CY - Budapest, Hungary DA - 2010-08-21 PY - 2010 AN - OPUS4-21041 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bahlmann, Arnold A1 - Carvalho, José Joao A1 - Weller, Michael G. A1 - Schneider, Rudolf A1 - Panne, Ulrich T1 - Occurence of Caffeine and Carbamazepine in Teltowkanal and Landwarekanal, Berlin T2 - Internationales Symposium "20 Years of Research in the Field of Endocrine Disruptors and Pharmaceutical Compounds - Challenge and Solution for the Water" CY - Berlin, Germany DA - 2010-02-10 PY - 2010 AN - OPUS4-21033 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rackwitz, Vanessa A1 - Warrikhoff, A. A1 - Panne, Ulrich A1 - Hodoroaba, Vasile-Dan T1 - Determination of emitted X-ray tube spectra by means of a calibrated instrumental setup T2 - EXRS 2010 (European conference on X-Ray Spectrometry CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-21135 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rackwitz, Vanessa A1 - Warrikhoff, A. A1 - Panne, Ulrich A1 - Hodoroaba, Vasile-Dan T1 - Determination of emitted X-ray tube spectra by means of a calibrated instrumental setup T2 - EMAS 2010, 9th EMAS Regional Workshop CY - Amsterdam, Netherlands DA - 2010-04-25 PY - 2010 AN - OPUS4-21061 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Giesen, Charlotte A1 - Weller, Michael G. A1 - Jakubowski, Norbert A1 - Panne, Ulrich T1 - Determination of Ochratoxins in wine by an ICP-MS-based Enzyme-Linked Immunosorbent Assay T2 - GDMS-Jahrestagung CY - Halle (Saale), Germany DA - 2010-03-07 PY - 2010 AN - OPUS4-20818 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sarfraz, Adnan A1 - Emmerling, Franziska A1 - Panne, Ulrich A1 - Simo, A. A1 - Fenger, R. L. A1 - Christen, W. A1 - Rademann, K. A1 - Rößler, E. T1 - Crystallization and Morphological Diversity of Caffeine on Surfaces: Needles and Hexagons T2 - Tag der Chemie CY - Berlin, Germany DA - 2010-06-16 PY - 2010 AN - OPUS4-21209 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf A1 - Bahlmann, Arnold A1 - Weller, Michael G. A1 - Panne, Ulrich T1 - Identifizierung strukturverwandter Stoffe und Transformationsprodukte von Pharmaka in Wasserproben mittels LC-ELISA-Kopplung T2 - Umwelt 2010, 4. Gemeinsame Jahrestagung der GDCh-Fachgruppe Umweltchemie und Ökotoxikologie und der Society of Environmental Toxicology and Chemistry Europe (German-Languge Branch) e.V. (SETAC GLB), Umweltbundesamt CY - Dessau-Roßlau, Germany DA - 2010-09-07 PY - 2010 AN - OPUS4-22080 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar A1 - Emmerling, Franziska A1 - Panne, Ulrich A1 - Müller, Urs T1 - Characterisation of early hydration processe4s and chemical attacks of cementitious materials by time- and space-resolved X-Ray diffraction methods T2 - Jahrestagung der deutschen mineralogischen Gesellschaft (DMG) CY - Münster, Germany DA - 2010-10-19 PY - 2010 AN - OPUS4-21472 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bahlmann, Arnold A1 - Carvalho, José Joao A1 - Schultze, Karin A1 - Lehmann, Andreas A1 - Weller, Michael G. A1 - Panne, Ulrich A1 - Schneider, Rudolf T1 - Bestimmung des anthropogenen Markers Carbamazepin im Gewässerkreislauf mit Hilfe eines neuentwickelten Immunoassays (ELISA) T2 - Jahrestagung der Wasserchemischen Gesellschaft CY - Bayreuth, Germany DA - 2010-05-12 PY - 2010 AN - OPUS4-21548 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar A1 - Emmerling, Franziska A1 - Müller, Urs A1 - Panne, Ulrich T1 - High resolution phase analyses and early crystallization processes of cement T2 - 26th European Crystallographic Meeting (ECM) CY - Darmstadt, Germany DA - 2010-08-29 PY - 2010 AN - OPUS4-21231 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kipphardt, Heinrich A1 - Gusarova, Tamara A1 - Traub, Heike A1 - Jakubowski, Norbert A1 - Panne, Ulrich T1 - Primary standards for element determination & trace analysis T2 - RM 2010-Beijing International Symposium on Reference Materials CY - Beijing, China DA - 2010-10-26 PY - 2010 AN - OPUS4-21991 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf A1 - Bahlmann, Arnold A1 - Weller, Michael G. A1 - Panne, Ulrich T1 - Transformation products of pharmaceuticals in surface water - detected by LC-ELISA T2 - TransCon 2010 CY - Ascona, Switzerland DA - 2010-09-13 PY - 2010 AN - OPUS4-22071 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Esslinger, Susanne A1 - Becker, Roland A1 - Schröter-Kermani, C. A1 - Nehls, Irene A1 - Panne, Ulrich T1 - HBCD in Silbermöweneiern: enantiomerenspezifischer Nachweis und zeitlicher Verlauf T2 - Tag der Chemie CY - Berlin, Germany DA - 2010-06-16 PY - 2010 AN - OPUS4-21214 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Esslinger, Susanne A1 - Köppen, Robert A1 - Becker, Roland A1 - Nehls, Irene A1 - Panne, Ulrich T1 - Nachweis von HBCD in Meeresbewohnern zweier norwegischer Fjorde T2 - Tag der Chemie CY - Berlin, Germany DA - 2010-06-16 PY - 2010 AN - OPUS4-21215 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Panne, Ulrich T1 - Spectrochemical Analysis: Tools and Toys!? T2 - eingel. Vortrag CY - Graz, Austria DA - 2010-03-15 PY - 2010 AN - OPUS4-21536 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Giesen, Charlotte A1 - Jakubowski, Norbert A1 - Panne, Ulrich A1 - Weller, Michael G. T1 - Comparison of ICP-MS and Photometric Detection of an Immunoassay for the Determination of Ochratoxin A in Wine T2 - Laser Ablation Workshop CY - Kiel, Germany DA - 2010-06-29 PY - 2010 AN - OPUS4-22585 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Giesen, Charlotte A1 - Panne, Ulrich A1 - Jakubowski, Norbert A1 - Weller, Michael G. T1 - ICP-MS-Detektion eines Immunoassys zur Bestimmung von Ochratoxin A in Wine T2 - ICP-MS Anwendertreffen CY - Berlin, Germany DA - 2010-09-06 PY - 2010 AN - OPUS4-22588 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Giesen, Charlotte A1 - Panne, Ulrich A1 - Weller, Michael G. T1 - Application of labelled Antibodies for ICP-MS Detection T2 - FACSS 2010 CY - Raleigh, NC, USA DA - 2010-10-17 PY - 2010 AN - OPUS4-22586 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf A1 - Bahlmann, Arnold A1 - Carvalho, José Joao A1 - Pannenbecker, Kirsten A1 - Weller, Michael G. A1 - Panne, Ulrich A1 - Dünnbier, U. A1 - Jekel, M. T1 - Carbamazepin and caffeine as markers for sewage input into the water cycle - rapid assessment sensitive immunoassay T2 - The International Chemical Congress of Pacific Basin Societies (Pacifichem 2010) CY - Honolulu, HI, USA DA - 2010-12-15 PY - 2010 AN - OPUS4-22860 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühn, Andreas A1 - Riesemeier, Heinrich A1 - Reinholz, Uwe A1 - Radtke, Martin A1 - Ostermann, Markus A1 - Panne, Ulrich A1 - Scharf, Holger T1 - Untersuchungen von TXRF Probenträgern mit einer 2D Röntgenfarbkamera T2 - AK Prozessanalytik 2010 CY - Waldbronn, Germany DA - 2010-11-08 PY - 2010 AN - OPUS4-22925 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Giesen, Charlotte A1 - Jakubowski, Norbert A1 - Panne, Ulrich A1 - Weller, Michael G. T1 - Ochratoxin-A-Bestimmung in Wein mittels eines ICP-MS-basierten Immunoassays PY - 2010 UR - http://www.analytik-news.de/Fachartikel/Volltext/BAM2.pdf SP - 1 EP - 6 PB - Dr. Beyer Internet-Beratung CY - Ober-Ramstadt AN - OPUS4-22702 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Chinthalapati, Siva Kesava Raju A1 - Lück, Detlef A1 - Scharf, Holger A1 - Jakubowski, Norbert A1 - Panne, Ulrich T1 - A novel solid phase extraction method for pre-concentration of gadolinium and gadolinium based MRI contrast agents from the environment N2 - An efficient solid phase extraction (SPE) method using bis-(2-ethylhexyl)-phosphate (HDEHP) coated reverse phase C18 support has been developed for the pre-concentration of Gadolinium (Gd) and Gd contrast agents widely used in magnetic resonance imaging (MRI). Enrichment of Gd in the ionic form has been compared with strong cation exchange material Chromabond SA (SCX), weak ion exchange material Chelex-100 and also with lanthanide specific HDEHP modified reverse phase C18. The determination of Gd and its complexes after enrichment were performed using inductively coupled plasma mass spectrometry (ICP-MS) and on the basis of 158Gd. Among the three SPE materials, HDEHP coated reverse phase C18 SPE has been found to be most efficient, yielding a hundredfold Gd enrichment with > 95% recovery for linear and cyclic contrast agents like Gd-DTPA (Magnevist), Gd-DOTA (Dotarem), Gd-BOPTA (Multihance), and Gd-BT-DO3A (Gadovist). The developed SPE method has been successfully applied to the surface water and waste water samples originated from different places in Berlin, Germany. The results were in good agreement with the results obtained with direct measurement with ICP-MS. The developed pre-concentration method can be efficiently used for the determination of trace levels of gadolinium in the environment even with less sensitive analytical techniques. KW - Solid phase extraction KW - Magnetic resonance imaging KW - Gadolinium KW - Gd based contrast agents KW - Chelex-100 KW - HDEHP KW - Speciation PY - 2010 DO - https://doi.org/10.1039/c003251d SN - 0267-9477 SN - 1364-5544 VL - 25 IS - 10 SP - 1573 EP - 1580 PB - Royal Society of Chemistry CY - London AN - OPUS4-21985 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Park, S.-C. A1 - Tuma, Dirk A1 - Kim, S A1 - Lee, Y.R. A1 - Shim, J.-J. T1 - Sorption of C. I. disperse red 60 in polystyrene and PMMA films and polyester and nylon 6 textiles in the presence of supercritical carbon dioxide KW - Supercritical fluid dyeing KW - Supercritical carbon dioxide KW - C.I. disperse red 60 KW - Poly(methyl methacrylate) KW - Polystyrene KW - Polyester KW - Nylon KW - Sorption KW - Überkritische Fluide PY - 2010 DO - https://doi.org/10.2478/s11814-010-0098-6 SN - 0256-1115 VL - 27 IS - 1 SP - 299 EP - 309 PB - Inst. CY - Seoul AN - OPUS4-20815 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rackwitz, Vanessa A1 - Warrikhoff, A. A1 - Panne, Ulrich A1 - Hodoroaba, Vasile-Dan T1 - Determination of emitted X-ray tube spectra by means of a calibrated instrumental setup KW - X-ray tube spectrum KW - XRF KW - SEM KW - EDS KW - Spectrometer efficiency PY - 2010 DO - https://doi.org/10.1017/S1431927610054292 SN - 1431-9276 SN - 1435-8115 VL - 16 IS - Supplement S2 SP - 930 EP - 931 PB - Cambridge University Press CY - New York, NY AN - OPUS4-22471 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Carvalho, José Joao A1 - Weller, Michael G. A1 - Panne, Ulrich A1 - Schneider, Rudolf T1 - A highly sensitive caffeine immunoassay based on a monoclonal antibody KW - Caffeine KW - ELISA KW - Antibody KW - LC–MS–MS KW - Water KW - Wastewater marker PY - 2010 DO - https://doi.org/10.1007/s00216-010-3506-1 SN - 1618-2642 SN - 1618-2650 VL - 396 IS - 7 SP - 2617 EP - 2628 PB - Springer CY - Berlin AN - OPUS4-22651 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Gusarova, Tamara T1 - Wege zur genauen Charakterisierung hochreiner Materialien mit der Glimmentladungs-Massenspektrometrie (GD-MS) N2 - Die vorliegende Arbeit befasst sich mit der Analyse hochreiner Metalle mittels GD-MS (Glimmentladungs-Massenspektrometrie). Der Schwerpunkt war dabei die Verbesserung der genauen Bestimmung von Elementspuren, insbesondere im μg kg-1-Bereich, für den Kalibrierproben bekannter Zusammensetzung praktisch nicht existieren. Zur Überwindung des Problems wurden flüssigdotiere Pulverpresslinge als synthetische Kalibrierproben für die Matrices Zn, In, Cu, Fe sowie Co und das System Co/C hergestellt. Durch umfassende Untersuchungen der Praparationsschritte und eine eingehende Charakterisierung der Presslinge konnte deren Herstellungsprozess optimiert und deren Verhalten in der Glimmentladung besser verstanden werden. Das erarbeitete Quantifizierungskonzept wurde durch die Messung zertifizierter Matrixreferenzmaterialien mit Gehalten im mg kg-1-Bereich validiert, und seine Eignung auf hohem metrologischen Niveau bei der sehr erfolgreichen Teilnahme an einem weltweiten Ringversuch der internationalen Metrologieinstitute nachgewiesen. Gegenüber den bislang mangels tragfähiger Alternative verwendeten kalibrierprobenfreien Quantifizierungskonzepten ist der Einsatz der Presslinge bezüglich Richtigkeit, Unsicherheit und Rückführung auf das internationale Einheitensystem deutlich überlegen. Die GD-MS mit ihren Vorteilen als schnelle direkte Feststoffmethode erreicht so erstmalig die Analysenqualität der etablierten losungsbasierten Analysenmethoden, und erhöht damit ihren Anwendungsbereich deutlich, so dass sie schließlich auch für die Analyse von realen Proben für wichtige metrologische Fragestellungen angewendet werden konnte, wie für die Analyse von Zn-Fixpunktzellen, die für die Definition der internationalen Temperaturskala ITS 90 benötigt werden, oder für Primarnormale der chemischen Analytik. Darüber hinaus wurde grundlegend die Übertragbarkeit der klassischen kalibrierprobenfreien Quantifizierungskonzepte auf das neu auf dem Markt befindliche hochauflösenden GD-MS Gerat (Element GD) untersucht. Dabei wurden insbesondere die Einschränkungen herausgearbeitet, die für das völlig anders konstruierte Vorgängermodell VG 9000 nicht gelten. Ergänzende Untersuchungen zum Hohlkathodeneffekt führten zwar nicht bei der GD-MS, wohl aber bei der GD OES (Glimmentladung mit optischer Emissionsspektrometrie), zu einer enormen Steigerung des Nachweisvermögens für Elementspuren. N2 - The main aim of this work consists in the investigation, development and application of improved possibilities of accurate analysis of high purity materials using the solid sample technique of Glow Discharge Mass Spectrometry (GD-MS), as well as in the sensitivity enhancement of GD Optical Emission Spectrometry (GD-OES) by implicating the hollowcathode effect. The emphasis of the PhD thesis consists in the accurate quantification for GD-MS. As appropriate certified reference materials (CRMs) for calibration are lacking in most cases an accurate quantification especially for trace elements mass fractions at μg kg-1 Level can often not be achieved. To overcome this problem and to expand the possibilities of modern GD-MS hereby, synthetic standards were applied for calibration of both high resolution GD-MS instruments “VG 9000” and “Element GD”. The standards were prepared by doping of matrix powder with trace element standard solutions followed by drying and pressing the doped powder to compact pellets. With the quantification approach worked out and described here accurate analysis results with small uncertainties can be achieved for most elements of periodic table in almost every matrix composition. Furthermore direct traceability of the analytical results to the International System of Units (SI) is provided ensuring their higher metrological quality. Numerous additional systematic investigations concerning the preparation of the synthetic standards and their properties were carried out. The results of calibration of GD-MS instruments with synthetic standards for Co (Co-C), Cu, In, Fe and Zn matrices were checked by measuring CRMs. These results were also contrasted with those of other quantification approaches, as usually used in GD-MS routine. The results achieved with synthetic standards had the highest accuracy. The successful participation in the round robin test CCQM-P107 between international metrological institutes for analysis of high purity zinc demonstrated the high quality of the results based on the calibration procedure with synthetic standards. The quality of the results was comparable to those of established liquid sample methods. Additionally in the frame of this work high purity materials to be used for important metrological purposes of thermometry (fixpoint materials) and of analytical chemistry (primary standard materials) were comprehensively analyzed using the proposed quantification strategy. T3 - BAM Dissertationsreihe - 55 KW - Glimmentladung KW - Reinstmetalle KW - Rückführung KW - Massenspektrometrie KW - synthetische Standards PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1035 SN - 978-3-9813346-1-6 SN - 1613-4249 VL - 55 SP - 1 EP - 225 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-103 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Schulte, Franziska T1 - Raman-Spektroskopie als Werkzeug für die Charakterisierung und Klassifizierung von Pollen N2 - Diese Arbeit widmet sich der Analyse von Pollenkörnern und einzelnen Pollenkomponenten mit Hilfe der Raman-Spektroskopie, ergänzt wurden diese Untersuchungen durch den Einsatz der Massenspektrometrie, ESEM-Technik, Hochleistungs-Dünnschicht- Chromatographie, IR- und NMR-Spektroskopie. Die Klassifizierung der Pollenspezies erfolgte durch eine Clusteranalyse der Raman- Spektren. Diese Methode kann die Grundlage für eine automatische On-line-Detektion zur Erstellung von Pollenflugwarnungen für Allergiker bilden. Es gelang die Pollenarten zu unterscheiden, darüber hinaus spiegeln die resultierenden Dendrogramme den phylogenetischen Ursprung der Pollenspezies wider. Eine Ursache für falsche Zuordnungen der Pollen stellten hohe Gehalte an Carotinoiden dar. Durch das Bestrahlen der Proben mit 633 nm wurden die Carotinoide abgebaut und der Einfluss der Carotinoide auf die Clusteranalyse reduziert. Die Aufnahmen von resonanten Raman-Spektren der mittels HPTLC aufgetrennten Carotinoide belegten Unterschiede in der Zusammensetzung der Carotinoide in Abhängigkeit von der Pollenspezies. Die Konzentrationen der Carotinoide in den Pollen konnten mit Hilfe der UV-Vis Absorptions- Spektroskopie bestimmt werden. Des Weiteren konnte belegt werden, dass die in-situ Spektren ganzer Pollenkörner die typischen Carotinoidsignaturen einer Pollenspezies widergeben. Die in-situ Spektren sind von Vorteil, weil sie ohne Präparation aufgenommen wurden. Außerdem wurde der Einfluss der biologischen Matrix berücksichtigt. Weitere Bestandteile der Pollenkörner wurden isoliert und mit Hilfe der Raman-, IR- und NMR-Spek- troskopie untersucht. So konnten Veränderungen der chemischen Struktur durch die Aufreinigungsprozeduren nachgewiesen werden. Von besonderem Interesse ist die Analyse des Biomakromoleküls Sporopollen in, welches für die Langlebigkeit und chemischen Stabilität der Pollenkörner verantwortlich ist. Es wurden Aminosäuren, Phosphorlipide, Cellulose und Coumarinsäure in den Pollenkörnern gefunden. Die Verteilung dieser Substanzen in den Pollenkörnern konnte via 2D Raman-Experimente dargestellt werden. Die Signale der Coumarinsäure konnten ebenfalls in den Raman-Spektren keimender Pollenkörner entdeckt werden. Die Pollenschläuche bestehen überwiegend aus Cellulose. Neben diesen Gemeinsamkeiten wurden speziesspezifische Unterschiede der chemischen Zusammensetzung festgestellt. N2 - The chemical composition of pollen, the physiological containers that produce the male gametophytes of seed plants, has been a subject of research of plant physiologists, biochemists, and lately even material scientists for various reasons. The aim of this work was the analysis of whole pollen grains and pollen components by Raman Spectroscopy. These experiments were complemented by other techniques such as Enviromental Scanning Electron Microscopy (ESEM), High-Performance-Thin-Layer-Chromatography (HPTLC), Infrared Spectroscopy (IR) and Nuclear-Magnetic-Resonance Spectroscopy (NMR). As reported here, individual fresh pollen grains and their morphological constituents can be characterized and also classified in situ without prior preparation. Classification of pollen is based on their biochemical fingerprint revealed in their Raman spectrum. Raman spectroscopy is nondestructive and can be carried out with single pollen grains or fragments. It could be shown that the biochemical makeup of the pollen (as a part of the recognition/mating system) is altered during formation of a new biological species and that the species-specific chemical similarities and dissimilarities indeed reflect in the Raman spectral fingerprint. On the basis of the chemical information, unsupervised multivariate analysis consisting of hierarchical clustering revealed in most cases chemical similarities between species that were indicative of both phylogenetic relationship and matin behavior. Therefore experiments were conducted that gave the in situ Raman spectroscopic signatures ot the carotenoid molecules. As the data indicates, the in situ Raman spectra of the carotenoid molecules measured in single intact pollen grains provide in situ evidence of interspecies variations in pollen carotenoid content, structure, and/or assembly without composition varied greatly between species and that the different in situ spectral signatures reflect indeed differences in carotenoid composition. Moreover, comparison of the HPTLC data with resonant Raman spectra measured in situ illustrated that resonant Raman spectroscopy is very sensitive compared to approaches that need to rely on extraction procedures. In addition, the in situ difference spectra already include spectral features that may arise due to association of the carotenoid molecules with the biological matrix. A database of the species-specific in situ carotenoid spectra could in the future be used for automated spectrum correction and identification. This would fulfill an important prerequisite for fast analysis of pollen, and also of other plant tissues, e.g., in quality control of produce. To learn more about components present in pollen other than carotenoids Raman, IR and NMR spectra were collected from purified pollen compounds. Structural changes due to the applied isolation procedures could be detected. This fact has to be kept in mind for the structural elucidation of sporopollenin. This macromolecule is responsible for the longevity and stability of pollen, hence possible applications in materials science palynology and food technology arise. Based on the Raman spectra numerous compounds were detected within pollen such as amino acids, phospholipids, cellulose and coumaric acid. The distribution of these molecules within the pollen grains was illustrated by 2D Raman mapping experiments. Apart from microspectroscopic studies of quiescent, inactive pollen grains, also the dynamic process of pollen germination was investigated by Raman spectroscopy. The result permits the conclusion that differences between the spectra of germinated and non germinated pollen are caused by metabolic changes. This shows that Raman spectroscopy is not only a tool for fingerprinting and structure analysis but could also be useful for other disciplines. T3 - BAM Dissertationsreihe - 57 KW - Raman-Spektroskopie KW - Carotinoid KW - Clusteranalyse KW - Pollen KW - Sporopollenin PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1010 SN - 978-3-9813346-8-5 SN - 1613-4249 VL - 57 SP - 1 EP - 189 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-101 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Müller, Maike T1 - Neue Wege zur Quantifizierung mit der laserinduzierten Plasmaspektroskopie (LIBS) N2 - Ihre Fähigkeiten schnell und ohne hohen Kostenaufwand jegliche Probenmatrices auf eine Vielzahl an Elementen analysieren zu können macht die laserinduzierte Plasmaspektroskopie besonders interessant für industrielle Anwendungen. Bisher jedoch weist die Methode Schwachstellen auf, die LIBS im Vergleich zu anderen Techniken unattraktiv erscheinen lässt. Es fehlt an kostengünstigen, einheitlichen, leicht bedienbaren Aufbauten. Die inhomogene Natur eines laserinduzierten Plasmas erschwert eine Elementanalyse mit LIBS. Für eine quantitative Analyse werden bisher am häufigsten Kalibrierungen über Linienintensitäten von bekannten Referenzmaterialien mit möglichst vergleichbarer Matrix unter selben Versuchsbedingungen durchgeführt. In dieser Arbeit wurden verschiedene Bereiche, die eine LIBS-Analyse beeinflussen, untersucht. Instrumentell bestimmt der Detektor neben dem wellenlängenseparierenden Element die Qualität der Auflösung einer Messung. Anhand des Vergleichs von zwei Detektoren, einer ICCD- und einer CCD-Kamera, konnte die Effizienz der CCD-Kamera gegenüber der ICCD experimentell bewiesen werden. Untersuchungen des Plasmaexpansionsverhaltens unter verschiedenen atmosphärischen Bedingungen konnten zeigen, dass die Detektionsgeometrie die Empfindlichkeit und Reproduzierbarkeit von Messungen beeinflusst. Bei der Konzentrationsermittlung unbekannter Elemente in einer Probe durch lineare Kalibriergeraden dürfen keine selbstabsorbierten Emissionslinien verwendet werden, die eine geringere Konzentration als tatsächlich vorhanden vortäuschen. Die Dupliaktionsmethode und die lineare Korrelationsanalyse wurden getestet solche Linien zu identifizieren. Verglichen zur Duplikationsmethode zeigte die lineare Korrelationsanalyse hohes Potenzial zur Charakterisierung des Beginns von Selbstabsorption einer Emissionslinie. Da oftmals die Referenzmaterialien zur Erstellung von Kalibriergeraden fehlen, wurden in dieser Arbeit individuelle Kalibrierstandards basierend auf einer Kupfer- und einer Polyacrylamidmatrix hergestellt und auf ihre Anwendbarkeit für LIBS getestet. Die Ergebnisse dieser Arbeit zeigen Optimierungsmöglichkeiten der Methode im instrumentellen sowie im applikativen Bereich. T3 - BAM Dissertationsreihe - 52 KW - Laser-Spektroskopie KW - Kalibrierstandards KW - Selbstabsorption KW - Plasma KW - Detektoren PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1069 SN - 978-3-9812910-8-7 SN - 1613-4249 VL - 52 SP - 1 EP - 159 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-106 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Traub, Heike A1 - Czerwensky, Michael A1 - Matschat, Ralf A1 - Kipphardt, Heinrich A1 - Panne, Ulrich T1 - Different calibration strategies for the analysis of pure copper metal by nanosecond laser ablation inductively coupled plasma mass spectrometry N2 - In this work, different calibration strategies for the determination of trace elements in pure copper metal by nanosecond laser ablation ICP-MS were investigated. In addition to certified reference materials (CRMs), pellets of doped copper powder were used for calibration. The micro homogeneity of the CRMs as well as the solution-doped pellets was sufficient to use them as calibration samples in combination with a laser spot size of 200 µm. In contrast, pellets doped with analytes in solid form showed a significant heterogeneity. For most of the investigated analytes and copper CRMs the measured mass fractions were within ± 20% of their certified values when other copper CRMs were used as calibration samples. When solution-doped powder pellets were used as calibration samples a systematic trend towards mass fractions below the certified values was observed for nearly all elements determined in the analysed CRMs. Thermal fractionation effects during the ablation of the solution-doped pellets were suspected as the extent of the fractionation depends on the irradiance, whereas fractionation is reduced at higher irradiance. PY - 2010 DO - https://doi.org/10.1039/b915564c SN - 0267-9477 SN - 1364-5544 VL - 25 IS - 5 SP - 690 EP - 696 PB - Royal Society of Chemistry CY - London AN - OPUS4-21195 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian A1 - Simon, Franz-Georg T1 - Phosphorrückgewinnung im Bereich der kommunalen Abwasserreinigung T2 - ProcessNet Sitzung des Fachausschusses "Abfallbehandlung und Wertstoffrückgewinnung" CY - Fichtenau, Germany DA - 2010-10-07 PY - 2010 AN - OPUS4-22401 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian A1 - Brenneis, Rudolf A1 - Adamczyk, Burkart A1 - Simon, Franz-Georg T1 - Recycling of waste materials by thermochemical treatment T2 - ISWA World congress 2010 - Urban development and sustainbility - a major challenge for waste management in the 21st century CY - Hamburg, Germany DA - 2010-11-15 KW - thermochemical substance separation KW - Thermodynamics KW - Thermochemistry PY - 2010 SP - 1 EP - 10(?) AN - OPUS4-22467 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian A1 - Brenneis, Rudolf A1 - Adamczyk, Burkart A1 - Simon, Franz-Georg T1 - Recycling of Waste Materials by Thermochemical Treatment T2 - ISWA World Congress 2010 Urban Development and Sustainability - a Major Challenge for Waste Management in the 21st Century CY - Hamburg, Germany DA - 2010-11-15 PY - 2010 AN - OPUS4-22473 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg T1 - Resource consumption and environmental impact N2 - Resource consumption is always accompanied by environmental impacts. In most cases, it is not possible to quantify the extent of such negative impacts. However, the external cost of uranium mining in Germany can be estimated at 30 Euro/kg U. The environmental impact can be reduced when waste materials are processed, so that their use as a secondary raw material, substituting for natural resources, is possible. The recyclability of waste materials depends on the price of a resource and the concentration of the component in the waste. KW - External cost KW - Resources from waste KW - Uranium mining PY - 2010 DO - https://doi.org/10.2462/09670513.1000 SN - 0967-0513 VL - 18 IS - 3 SP - 313 EP - 320 PB - EPP Publ. CY - Richmond AN - OPUS4-22177 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Oliver A1 - Simon, Franz-Georg A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Sarynna Lopez, Meza T1 - Leaching experiments on the release of heavy metals and PAH from C&D waste and MSWI bottom ash T2 - CRETE 2010 - 2nd International Conference on Hazardous and Industrial Waste Management CY - Chania, Greece DA - 2010-10-05 PY - 2010 AN - OPUS4-21304 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute A1 - Krüger, Oliver A1 - Berger, Wolfgang A1 - Simon, Franz-Georg T1 - Source term determination by leaching procedures - New developments in Germany T2 - Global Waste Management Symposium CY - San Antonio, TX, USA DA - 2010-10-03 PY - 2010 AN - OPUS4-22404 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Increasing Materials Efficiency in Industry T2 - EIONET Workshop CY - Berlin, Germany DA - 2010-11-10 PY - 2010 AN - OPUS4-22385 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Höhse, Marek A1 - Merk, Sven A1 - Gornushkin, Igor B. A1 - Panne, Ulrich T1 - Diode Pumped Solid state Lasers: Portable Lasers with the Performance of Double Pulse LIBS T2 - LIBS 2010 CY - Memphis, TN, USA DA - 2010-09-13 PY - 2010 AN - OPUS4-22913 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gornushkin, Igor B. A1 - Panne, Ulrich T1 - Radiative models of laser-induced plasma and pump-probe diagnostics relevant to laser-induced breakdown spectroscopy N2 - The paper describes past and present efforts in modeling of laser-induced plasma and overviews plasma diagnostics carried out by pump-probe techniques. Besides general information on existing plasma models, the emphasis is given to models relevant to spectrochemical analysis, i.e. models of radiating plasma. Special attention is paid to collisional-radiative (CR) and collisional-dominated (CD) plasma models where radiative processes play an important role. Also, calibration-free (CF) models are considered which may endow with the possibility for standardless spectroscopic analysis. In the diagnostic part, only methods based on the use of additional diagnostic tools (auxiliary lasers, optics, and probes) are described omitting those based on plasma own radiation. A short review is provided on image-based diagnostics (shadowgraphy, schlieren, and interferometry), absorption and fluorescence, Langmuir probe, and less frequently used cavity ringdown and Thomson scattering methods. KW - Laser ablation KW - Modeling KW - Plasma diagnostics KW - Laser-induced breakdown spectroscopy PY - 2010 DO - https://doi.org/10.1016/j.sab.2010.03.021 SN - 0584-8547 SN - 0038-6987 VL - 65 IS - 5 SP - 345 EP - 359 PB - Elsevier CY - Amsterdam AN - OPUS4-24003 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gornushkin, Igor B. A1 - Shabanov, Sergej V. A1 - Merk, Sven A1 - Tognoni, E. A1 - Panne, Ulrich T1 - Effects of non-uniformity of laser induced plasma on plasma temperature and concentrations determined by the Boltzmann plot method: implications from plasma modeling PY - 2010 DO - https://doi.org/10.1039/C0JA00016G SN - 0267-9477 SN - 1364-5544 VL - 25 SP - 1643 EP - 1653 PB - Royal Society of Chemistry CY - London AN - OPUS4-22942 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann-Böllinghaus, Anja T1 - Brandschutznormung für Busse im Vergleich zu Schienenfahrzeugen T2 - Brandschutztag Schienenfahrzeuge CY - Leverkusen, Germany DA - 2010-05-20 PY - 2010 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. AN - OPUS4-21535 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Hofmann-Böllinghaus, Anja A1 - Krause, Ulrich T1 - Chemical analysis of upholstered seats for investigation of bus fires T2 - 11th International Seminar on Fire Protection, trade fair Interschutz 2010 CY - Leipzig, Germany DA - 2010-06-06 PY - 2010 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. AN - OPUS4-21426 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann-Böllinghaus, Anja T1 - Brandsicherheit in Bussen, numerische und experimentele Untersuchungen T2 - AGS Jahressitzung, Feuersozietät CY - Berlin, Germany DA - 2010-12-10 PY - 2010 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. AN - OPUS4-22774 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Torge, Manfred A1 - Feldmann, Ines A1 - Bücker, Michael A1 - Seeger, Stefan T1 - The effect of climate and dust on the state of preservation of historic stained glass windows T2 - COST-D42 Final meeting CY - Dublin, Ireland DA - 2010-11-08 PY - 2010 AN - OPUS4-22440 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wienold, Julia A1 - Traub, Heike A1 - Bresch, Harald A1 - Seeger, Stefan A1 - Kipphardt, Heinrich A1 - Recknagel, Sebastian T1 - Dependency of particle size distributions, originating from IR-laser ablation, on laser paramters and materials T2 - 10th European Workshop on Laser Ablation CY - Kiel, Germany DA - 2010-06-29 PY - 2010 AN - OPUS4-21792 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seefeldt, Henrik A1 - Braun, Ulrike A1 - Hofmann-Böllinghaus, Anja T1 - Fire retardancy of ammonium polyphosphate protected wood plastic composites T2 - 14th European Conference on Composites Materials CY - Budapest, Hungary DA - 2010-06-07 PY - 2010 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. AN - OPUS4-22716 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Simone A1 - Berger, Anka A1 - Hofmann-Böllinghaus, Anja A1 - Krause, Ulrich T1 - Investigations of smoke gas composition during a car fire T2 - Interflam 2010 - 12th International fire science & engineering conference (Proceedings) CY - Nottingham, UK DA - 2010-07-05 KW - FTIR spectroscopy KW - Combustion KW - Smouldering KW - Fire behaviour KW - Car fire PY - 2010 SN - 978-0-9541216-6-2 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. VL - 2 SP - 1755 EP - 1760 CY - London, UK AN - OPUS4-21854 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grandke, Julia A1 - Resch-Genger, Ute A1 - Schneider, Rudolf T1 - Development of different immunoassay formats and measurement uncertainty T2 - 4. Interdisziplinaäres Doktorandenseminar CY - Attendorn, Germany DA - 2010-02-21 PY - 2010 AN - OPUS4-21031 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Knaust, Christian A1 - Schneider, Uwe A1 - Krause, Ulrich A1 - Hofmann-Böllinghaus, Anja T1 - Modellierung von Brandszenarien mit CFD PY - 2010 SN - 0042-1804 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. VL - 59 IS - 1 SP - 20 EP - 30 PB - Kohlhammer CY - Stuttgart AN - OPUS4-20913 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hofmann-Böllinghaus, Anja A1 - Krüger, Simone A1 - Klippel, Alexander T1 - Experimental and numerical investigations of the burning behavior of vehicle materials small, intermediate and large scale investigations T2 - Interflam 2010 - 12th International fire science & engineering conference (Proceedings) CY - Nottingham, UK DA - 2010-07-05 PY - 2010 SN - 978-0-9541216-6-2 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. VL - 2 SP - 1139 EP - 1150 CY - London, UK AN - OPUS4-21853 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Simone A1 - Hofmann-Böllinghaus, Anja A1 - Krause, Ulrich T1 - Chemical analysis of smoke of burning upholstered bus seats T2 - 11th International symposium on fire protection CY - Leipzig, Germany DA - 2010-06-08 KW - Upholstered seats KW - FTIR spectroscopy KW - Combustion KW - Smouldering KW - Fire behaviour PY - 2010 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. SP - 1 EP - 12(?) AN - OPUS4-21445 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann-Böllinghaus, Anja A1 - Krüger, Simone A1 - Klippel, Alexander T1 - Experimental and numerical investigations of the burning behavior of vehicle materials small, intermediate and large scale investigations T2 - Interflam Konferenz 2010 CY - Nottingham, England DA - 2010-07-05 PY - 2010 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. AN - OPUS4-21844 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann-Böllinghaus, Anja A1 - Krüger, Simone T1 - Large scale experiment of a car fire and comparison with numerical investigations T2 - FIVE, International Konferenz Fire in Vehicles CY - Gothenburg, Sweden DA - 2010-09-29 PY - 2010 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. AN - OPUS4-22740 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Berger, Anka A1 - Hofmann-Böllinghaus, Anja A1 - Krause, Ulrich T1 - Smoke gas composition and temperatures during a car fire T2 - 11th International Seminar on Fire Protection, trade faire Interschutz 2010 CY - Leipzig, Germany DA - 2010-06-06 PY - 2010 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. AN - OPUS4-21427 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Berger, Anka A1 - Hofmann-Böllinghaus, Anja A1 - Krause, Ulrich T1 - Investigations of smoke gas composition during a car fire T2 - 12th international conference on fire science and engineering, Interflam CY - Nottingham, England DA - 2010-07-05 PY - 2010 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. AN - OPUS4-21716 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bresch, Harald A1 - Seeger, Stefan A1 - Österle, Werner A1 - Dörfel, Ilona A1 - Prietzel, Claudia T1 - Nanoscale Particulate Emissions from Car-Brakes - Instrumental needs for the measurement T2 - International Conference on Workplace Aerosols CY - Karlsruhe, Germany DA - 2010-06-29 PY - 2010 AN - OPUS4-21773 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kempel, Florian A1 - Hofmann-Böllinghaus, Anja A1 - Krause, Ulrich T1 - Numerical Investigation of a real fire case with downward fire spread T2 - 11th International Symposium on Fire Protection CY - Leipzig, Germany DA - 2010-06-08 PY - 2010 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. AN - OPUS4-21524 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeger, Stefan T1 - Characterization of Localized NP Emission Sources - Examples T2 - Metrology of Airborne Nanoparticles, Standardisation and Applications (MANSA-Workshop), NPL CY - London, England DA - 2010-06-08 PY - 2010 AN - OPUS4-21434 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Simone A1 - Hofmann-Böllinghaus, Anja A1 - Krause, Ulrich T1 - Brandanalytische Untersuchungen von Polymerwerkstoffen - Toxizität von Rauchgasen am Beispiel von Polyvinylchlorid (PVC) N2 - Zur Toxizität von Brandgasen insbesondere von organischen Stoffen liegen bisher noch unzureichende Erkenntnisse vor, obwohl diese für die Sicherheit der damit konfrontierten Personen oft von entscheidender Bedeutung sind. Ziel der hier dargestellten Untersuchungen ist es, die Zusammensetzung des Brandgases und die Menge der Brandgaskomponenten im Brandfall zu beurteilen und zu quantifizieren sowie entsprechende Prozeduren hierfür aufzuzeigen. Dazu wurden verschiedene Brandszenarien, die durch Verwendung von unterschiedlichen Arten von Prüföfen simuliert wurden, sowie Proben in den unterschiedlichen Größenmaßstäben untersucht. Durch den Einsatz eines mobilen FTIR-Gerätes (Fourier Transformations Infrarot Spektroskopie) ist es experimentell möglich, zeitaufgelöst quantitative Bestimmungen einzelner toxischer Brandgaskomponenten während der jeweiligen Brandszenarien zu ermitteln und somit eine Abschätzung der Toxizität vorzunehmen. Am Beispiel von Polyvinylchlorid (PVC) wird gezeigt, welche Auswirkungen die unterschiedlichen Brandszenarien auf die qualitative und quantitative Brandgaszusammensetzung haben. KW - Fire KW - Combustion KW - Smoke gases KW - Toxicity KW - PVC KW - Polymer KW - FTIR KW - Analysis KW - Fire scenario PY - 2010 SN - 0025-5300 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. VL - 52 IS - 3 SP - 124 EP - 131 PB - Hanser CY - München AN - OPUS4-21042 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kempel, Florian A1 - Schartel, Bernhard A1 - Hofmann-Böllinghaus, Anja A1 - Butler, K.M. A1 - Onate, E. A1 - Idelsohn, S.R. A1 - Rossi, R. A1 - Marti, J.M. T1 - Numerical simulation of polymeric materials in UL 94 test: Competition between gasification and melt flow/dripping T2 - Interflam 2010 - 12th International conference CY - Nottingham, UK DA - 2010-07-05 KW - Particle finite element method (PFEM) KW - UL 94 KW - Fire retardancy KW - PC/ABS KW - Melt flow KW - Dripping PY - 2010 SN - 978-0-9541216-5-5 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. VL - 1 SP - 721 EP - 730 PB - Interscience Communications CY - London, UK AN - OPUS4-21670 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seefeldt, Henrik A1 - Braun, Ulrike A1 - Hofmann-Böllinghaus, Anja T1 - Development of flame retarded wood plastic composites T2 - Seminarveranstaltung des Fachbereiches Polymerphysik und Polymertechnik, TU Berlin CY - Berlin, Germany DA - 2010-11-10 PY - 2010 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. AN - OPUS4-22808 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Yevtushenko, Oleksandra A1 - Bäßler, Ralph A1 - Pfennig, A. T1 - Corrosion behaviour of Cr13 steel in CO2 saturated brine with high chloride concentration N2 - The corrosion behaviour of martensitic stainless injection-pipeline steel X46Cr13 exposed to CO2 saturated artificial saline brine with high chloride concentration similar to onshore CCS-site at Ketzin, Germany has been investigated by means of electrochemical technique and microscopic observations at short exposure times (up to 24?h) and by mass loss and metallographic observations at exposure times up to 17520?h. Pitting corrosion kinetics has been characterised and the predictions about the corrosion mechanism are made. KW - Stainless steel KW - Pitting corrosion KW - Electrochemistry KW - Carbon dioxide PY - 2010 DO - https://doi.org/10.1002/maco.201005932 SN - 0947-5117 SN - 1521-4176 VL - 61 IS - 9999 SP - 1 EP - 5 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-23057 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Polte, Jörg A1 - Kraehnert, R. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Thünemann, Andreas A1 - Emmerling, Franziska T1 - New insights of the nucleation and growth process of gold nanoparticles via in situ coupling of SAXS and XANES N2 - Although metallic nanoparticles play an important role in the area of nanotechnology, a coherent mechanistic explanation for the evolution of the particles during their chemical synthesis has not yet been provided in many cases. To gain a profound understanding of the growth mechanism of colloidal nanoparticles, new approaches using Small Angle X-Ray Scattering (SAXS) combined with X-ray absorption near-edge structure (XANES) are presented. This combination allows for insights into two prominent syntheses routes of gold nanoparticles (GNP): The 'slow' reaction using sodium citrate (30-90 min) as a reducing agent and the 'fast' reaction employing NaBH4 (within few seconds). In the first case data derived with the coupled XANES and SAXS suggests a four-step particle formation mechanism. For the second system a time resolution in the order of 100-200 ms was achieved by coupling a common laboratory SAXS instrument with a microstructured mixer, which allows data acquisition in a continuous-flow mode. The results indicate a coalescence driven growth process. Based on the capabilities to deduce the size, number and polydispersity of the particles, the results of both methods enable the development of mechanistic schemes explaining the different phases of particle formation and growth, thus providing a basis for improved control over the synthesis processes. KW - SAXS KW - XANES KW - Nanoparticle formation PY - 2010 DO - https://doi.org/10.1088/1742-6596/247/1/012051 SN - 1742-6588 SN - 1742-6596 VL - 247 IS - 1 SP - 012051-1 - 012051-10 PB - IOP Publ. CY - Bristol, UK AN - OPUS4-22684 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Buzanich, Günter A1 - Riesemeier, Heinrich A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Kaden, T. A1 - Kreßner-Kiel, D. T1 - µ-XRF and µ-XANES, tools for the analysis of metallic impurities in photovoltaic polycrystalline silicon T2 - European Conference on X-ray Spectrometry CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-21203 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunewald, C. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich T1 - Sy-RFA Messungen annicht ebenen Objekten: Automatische Bestimmung des Einfallswinkels des anregenden Röntgenstrahls T2 - Deutsche Tagung für Forschung mit Synchrotronstrahlung, Neutronen und Ionenstrahlen, SNI 2010 CY - Berlin, Germany DA - 2010-02-24 PY - 2010 AN - OPUS4-20098 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Scharf, Oliver A1 - Reinholz, Uwe A1 - Buzanich, Günter A1 - Riesemeier, Heinrich A1 - Langhoff, N. A1 - Gubzhokov, R. A1 - Bjeoumikova, S. A1 - Wedell, R. A1 - Ihle, S. A1 - Soltau, H. T1 - X-ray camera with high energy and spital resolution: Sterography with a colour X-ray camera T2 - European Conference on X-ray Spectrometry CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-21205 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Buzanich, Günter A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich T1 - XBIC, µRFA und µXANES an metallischen Verunreinigungen in polykristallinem Solarsilicium T2 - Deutsche Tagung für Forschung mit Synchrotronstrahlung, Neutronen und Ionenstrahlen, SNI 2010 CY - Berlin, Germany DA - 2010-02-24 PY - 2010 AN - OPUS4-20122 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Behrendt, S. A1 - Paz, B. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Franz, A. A1 - Böhme, D. T1 - Archäometrische Untersuchungen an Stuckartefakten zur Klärung von Alter, Herkunft und Authentizität T2 - Mu Tec, Internationale Fachmesse für Museums- und Ausstelltechnik CY - Leipzig, Germany DA - 2010-11-18 PY - 2010 AN - OPUS4-22008 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Szczerba, Wojciech A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Thünemann, Andreas A1 - Fenger, R. L. A1 - Rademann, K. T1 - XAFS on CTAB stabilized gold nanoparticles T2 - 10th International School and Symposium on Synchrotron Radiation in Natural Science ISSRNS 2010 CY - Szklarska Poreba, Poland DA - 2010-06-06 PY - 2010 AN - OPUS4-21200 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scharf, Oliver A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Bjeoumikova, S. A1 - Gubzhokov, R. A1 - Langhoff, N. A1 - Wedell, R. A1 - Ihle, S. T1 - X-ray camera with high energy and spatial resolution: a colour X-ray camera T2 - European Conference on X-ray Spectrometry CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-21198 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reuter, Dirk A1 - Radtke, Martin A1 - Vincze, L. A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Hodoroaba, Vasile-Dan T1 - Modelling of X-Ray Scattering for improved X-Ray Fluoescence Analysis - Monochromatic Excitation T2 - European Conference on X-Ray Spectrometry CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-21159 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Polte, Jörg A1 - Emmerling, Franziska A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Thünemann, Andreas T1 - Small Angle X-ray Scattering as universial tool for nucleation and growth studies T2 - GENNESYS International Congress on Nanotechnology and Research Infrastructure CY - Barcelona, Spain DA - 2010-05-26 PY - 2010 AN - OPUS4-21323 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Cabral, A. R. A1 - Lehmann, B. A1 - Munnik, F. T1 - Spatially-resolved detection of iodine in natural plantinum-palladium nuggets: a comparison of PIXE and XRF T2 - European Conference on X-ray Spectrometry CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-21073 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Munnik, F. A1 - Lehmann, B. A1 - Cabral, A. R. T1 - Spatially-resolved detection of iodine in natural platinum-palladium nuggets: a comparison of PIXE and XRF T2 - European Conference on X-ray Spectrometry CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-21201 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zier, M. A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Radtke, Martin A1 - Munnik, F. A1 - Möller, W. T1 - Ions and X-rays: Unique Partners for Accurate Stopping Power Determination of 15N Ions in Si for Hydrogen Depth Profiling T2 - Deutsche Tagung für Forschung mit Synchrotronstrahlung, Neutronen und Ionenstrahlen, SNI 2010 CY - Berlin, Germany DA - 2010-02-24 PY - 2010 AN - OPUS4-20099 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reuter, Dirk A1 - Radtke, Martin A1 - Hodoroaba, Vasile-Dan A1 - Vincze, L. T1 - Modelling of X-Ray Scattering for improved X-Ray Fluorescence Analysis - X-Ray Tube Excitation T2 - European Conference on X-Ray Spectrometry CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-23065 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munnik, F. A1 - Cabral, A. R. A1 - Lehmann, B. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich T1 - Iodine detection in a heavy matrix, a comparison of PIXE and XRF T2 - 12th International Conference on Nuclear Microprobe Technology and Applications CY - Leipzig, Germany DA - 2010-07-26 PY - 2010 AN - OPUS4-21035 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunewald, Christian A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich T1 - SRXRF-measurements at non planar objects: Automatic determination of the angle of incidence of the exciting X-ray T2 - BESSY User Meeting CY - Berlin, Germany DA - 2010-12-09 PY - 2010 AN - OPUS4-22832 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zier, M. A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Radtke, Martin A1 - Munnik, F. T1 - Ions and X-rays: Unique partners for accurate stopping power determination of 15N ions in Si for hydrogen depth profiling T2 - Workshop Ionenstrahlphysik CY - Dresden, Germany DA - 2010-03-29 PY - 2010 AN - OPUS4-20920 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Buzanich, Günter A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich T1 - PART - An X-Ray Spectrometer for special applications in Cultural Heritage T2 - Seminarvortrag, Universität Lissabon, Falkultät für Physik CY - Lisbon, Portugal DA - 2010-06-30 PY - 2010 AN - OPUS4-21406 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rodrigues, M. A1 - Schreiner, M. A1 - Melcher, M. A1 - Guerra, M. A1 - Alram, M. A1 - Schindel, N. A1 - Salomon, J. A1 - Radtke, Martin T1 - Analysis of the Hoard of Beçin using X-ray based techniques T2 - European Conference on X-Ray Spectrometry CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-23262 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Polte, Jörg A1 - Emmerling, Franziska A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Thünemann, Andreas T1 - Real-time monitoring of copolymer stabilized growing gold nanoparticles N2 - A great challenge in the production of nanoparticles with defined sizes and properties is to control their growth in situ. We developed a dedicated combined small-angle X-ray scattering (SAXS) and X-ray absorption spectroscopy (XAS) setup to monitor nanoparticle formation in solution. The capabilities of simultaneously deriving particle sizes and oxidation states of atoms/ions are illustrated for the formation of spherical gold nanoparticles by the reduction of hydrogen tetrachloroaureate (HAuCl4). Particles with initial radii of 4.60 ± 0.10 nm and final radii of 5.67 ± 0.10 nm were produced in a levitated droplet with a volume of 4 µL. An ethylene oxide/propylene oxide triblock copolymer PEO-PPO-PEO (Pluronic F-127) functions as reducing agent and colloidal stabilizer. XANES shows in situ how the gold was reduced in the droplet from Au(III) to Au(0), and simultaneously SAXS recorded the size distribution of the formed nanoparticles. It is shown that the final particle number is reached quickly. Thereafter, only the particles’ sizes increase. Comparison of XANES and SAXS shows that the quantity of Au(0) is higher than the quantity of gold located in the nanoparticles while the particles are growing. Finally, all the Au(0) is found in the nanoparticles. We tentatively attribute this finding to the pseudo crown ether effect of the polymer surfactant that kinetically stabilizes gold atoms when formed from gold ions within their protecting cavity. A simple “burst” mechanism for the gold nanoparticle formation is the consequence. The possibility of an inhomogeneous particles structure with an enhanced density near the particle surface is discussed. PY - 2010 DO - https://doi.org/10.1021/la903829q SN - 0743-7463 SN - 1520-5827 VL - 26 IS - 8 SP - 5889 EP - 5894 PB - American Chemical Society CY - Washington, DC AN - OPUS4-21223 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich T1 - Characterization of precious metal objects with SRXRF at the Bamline T2 - Synchrotron Radiation in Art & Archaeology (SR2A-2010) CY - Amsterdam, Netherlands DA - 2010-11-07 PY - 2010 AN - OPUS4-21244 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Strub, E. A1 - Born, H. T1 - Neues vom Berliner Goldhut: Analyse mit Sy-RFA T2 - Deutsche Tagung für Forschung mit Synchrotronstrahlung, Neutronen und Ionenstrahlen, SNI 2010 CY - Berlin, Germany DA - 2010-02-24 PY - 2010 AN - OPUS4-20097 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Behrendt, S. A1 - Paz, B. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Franz, A. A1 - Böhme, D. T1 - Archäometrische Untersuchungen an Stuckartefakten zur Klärung von Alter, Herkunft und Authentizität T2 - Tagung Archäometrie und Denkmalpflege CY - Bochum, Germany DA - 2010-09-15 PY - 2010 AN - OPUS4-22009 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scharf, Oliver A1 - Riesemeier, Heinrich A1 - Radtke, Martin A1 - Reinholz, Uwe T1 - First images of a color X-ray camera, a detector with high resolution in energy and space T2 - DESY CY - Hamburg, Germany DA - 2010-10-06 PY - 2010 AN - OPUS4-22035 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Buzanich, Günter A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich T1 - PART - An X-Ray Spectrometer for special applications in Cultural Heritage T2 - EXPRS 2010 CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-21407 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinholz, Uwe A1 - Buzanich, Günter A1 - Grunewald, Christian A1 - Emmerling, Franziska A1 - Radtke, Martin A1 - Scharf, Oliver T1 - Archäometrie an der BAMline T2 - Lange Nacht der Wissenschaften, BAM, BESSY II CY - Berlin, Germany DA - 2010-06-05 PY - 2010 AN - OPUS4-21379 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - XRF using synchrotron radiation T2 - Vienna summer school 2010 "Radiation physics in cultural heritage studies" CY - Vienna, Austria DA - 2010-09-21 PY - 2010 AN - OPUS4-23263 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simons, C. A1 - Mans, C. A1 - Hanning, S. A1 - Janßen, A. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Ostermann, Markus A1 - Michaelis, Matthias A1 - Wienold, Julia A1 - Alber, D. A1 - Kreyenschmidt, M. T1 - Study on microscopic homogeneity of polymeric candidate reference materials BAM H001-BAM H010 by means of synchrotron µ-XRF and LA-ICP-MS N2 - In this study the microscopic homogeneity of the newly developed plastic reference materials BAM H001-BAM H010 was investigated. The materials consist of an acrylonitryle-butadien-styrene terpolymer, doped with different amounts of the elements Br, Cd, Cr, Hg and Pb. For the quantitative determination of the degree of homogeneity, a procedure proposed by Kempenaers et al. (Fresenius J. Anal. Chem., 2001, 369, 733-737) was used. On every sample an extensive number of different points were analyzed and standard deviation for every element mentioned above was used to calculate a minimal sampling mass that is necessary to reach a certain level of uncertainty caused by inhomogeneity (mmin,5%). The experiments were taken out with synchrotron µ-XRF (SR µ-XRF) at BESSYII in Berlin and by laser ablation inductively coupled plasma mass spectroscopy (LA-ICP-MS). The calculated values for mmin,5% of both techniques showed comparable results for all elements. It could be shown that the materials are suitable for calibration of micro analytic techniques if at least 64 µg are used. KW - XRF KW - LA-ICP-MS KW - RoHS KW - CRM PY - 2010 DO - https://doi.org/10.1039/b917008a SN - 0267-9477 SN - 1364-5544 VL - 25 SP - 40 EP - 43 PB - Royal Society of Chemistry CY - London AN - OPUS4-20938 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hodoroaba, Vasile-Dan A1 - Radtke, Martin A1 - Vincze, L. A1 - Rackwitz, Vanessa A1 - Reuter, Dirk T1 - X-ray scattering in X-ray fluorescence spectra with X-ray tube excitation - Modelling, experiment, and Monte-Carlo simulation N2 - X-ray scattering may contribute significantly to the spectral background of X-ray fluorescence (XRF) spectra. Based on metrological measurements carried out with a scanning electron microscope (SEM) having attached a well characterised X-ray source (polychromatic X-ray tube) and a calibrated energy dispersive X-ray spectrometer (EDS) the accuracy of a physical model for X-ray scattering is systematically evaluated for representative samples. The knowledge of the X-ray spectrometer efficiency, but also of the spectrometer response functions makes it possible to define a physical spectral background of XRF spectra. Background subtraction relying on purely mathematical procedures is state-of-the-art. The results produced by the analytical model are at least as reliable as those obtained by Monte-Carlo simulations, even without considering the very challenging contribution of multiple scattering. Special attention has been paid to Compton broadening. Relevant applications of the implementation of the analytical model presented in this paper are the prediction of the limits of detection for particular cases or the determination of the transmission of X-ray polycapillary lenses. KW - X-ray scattering KW - X-ray fluorescence KW - Spectral background KW - Modelling KW - Monte-Carlo simulation PY - 2010 DO - https://doi.org/10.1016/j.nimb.2010.09.017 SN - 0168-583X SN - 1872-9584 VL - 268 IS - 24 SP - 3568 EP - 3575 PB - Elsevier CY - Amsterdam AN - OPUS4-22357 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brücher, M. A1 - von Bohlen, A. A1 - Jacob, P. A1 - Franzke, J. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Müller, Bernd R. A1 - Scharf, Oliver A1 - Hergenröder, R. T1 - The charge of solid-liquid interfaces measured by X-ray standing waves and streaming current N2 - Measurements of ion distributions at a charged solid–liquid interface using X-ray standing waves (XSW) are presented. High energy synchrotron radiation (17.48 keV) is used to produce an XSW pattern inside a thin water film on a silicon wafer. The liquid phase is an aqueous solution containing Br and Rb ions. The surface charge is adjusted by titration. Measurements are performed over a pH range from 2.2–9, using the native Si oxide layer and functional (amine) groups as surface charge. The Debye length, indicating the extension of the diffuse layer, could be measured with values varying between 1–4 nm. For functionalized wafers, the pH dependent change from attraction to repulsion of an ion species could be detected, indicating the isoelectric point. In combination with the measurement of the streaming current, the surface charge of the sample could be quantified. KW - Interfacial charge KW - Solid/liquid interfaces KW - Surface analysis KW - Surface functionalization KW - X-ray spectrometry KW - X-ray KW - Standing waves KW - XSW KW - Streaming current KW - Synchrotron radiation PY - 2010 DO - https://doi.org/10.1002/cphc.201000166 SN - 1439-4235 SN - 1439-7641 VL - 11 IS - 10 SP - 2118 EP - 2123 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-22057 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rodrigues, M. A1 - Schreiner, M. A1 - Mäder, M. A1 - Melcher, M. A1 - Guerra, M. A1 - Salomon, J. A1 - Radtke, Martin A1 - Alram, M. A1 - Schindel, N. T1 - The hoard of Becin - non-destructive analysis of the silver coins N2 - We report the results of an analytical investigation on 416 silver-copper coins stemming from the Ottoman Empire (end of 16th and beginning of 17th centuries), using synchrotron micro X-ray fluorescence analysis (SRXRF). In the past, analyses had already been conducted with energy dispersive X-ray fluorescence analysis (EDXRF), scanning electron microscopy with energy dispersive X-ray spectrometry (SEM/EDX) and proton induced X-ray emission spectroscopy (PIXE).With this combination of techniques it was possible to confirm the fineness of the coinage as well as to study the provenance of the alloy used for the coins. For the interpretation of the data statistical analysis (principal component analysis—PCA) has been performed. A definite local assignment was explored and significant clustering was obtained regarding the minor and trace elements composing the coin alloys. KW - SRXRF KW - Silber KW - Archaeometrie PY - 2010 DO - https://doi.org/10.1007/s00339-010-5627-y SN - 0947-8396 VL - 99 IS - 2 SP - 351 EP - 356 PB - Springer CY - Berlin AN - OPUS4-23170 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wacker, G. A1 - Reinholz, Uwe A1 - Radtke, Martin A1 - Hanning, S. A1 - Kreyenschmidt, M. T1 - Bestimmung der lateralen Elementverteilung in potenziellen Referenzmaterialien auf Duromerbasis mittels Sy-RFA T2 - Deutsche Tagung für Forschung mit Synchrotronstrahlung, Neutronen und Ionenstrahlen, SNI 2010 CY - Berlin, Germany DA - 2010-02-24 PY - 2010 AN - OPUS4-20068 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Radtke, Martin A1 - Vincze, L. A1 - Görner, Wolf T1 - Quantification of energy dispersive SRXRF for the certification of reference materials at BAMline N2 - The certification of reference materials (CRMs) is one of the main tasks of the BAM Federal Institute for Materials Research and Testing. In this context CRMs for analytical chemistry play the dominant role. Traditionally, energy dispersive X-ray fluorescence (EDXRF) has been excluded from the final certification scheme. It has lacked the proof to be reliable enough due to peak overlapping and risks of incorrect background subtraction leading to unacceptable uncertainty and bias of the results. The development described aims at enabling ED-SRXRF to really contribute to certification by the aid of synchrotron radiation. This has been partly shown for macrocontents and has been successfully demonstrated for trace elements and thin layers. The method is based on a combination of measurements of pure elements or stoichiometric compounds as comparator materials and Monte Carlo simulations. Measurements have been performed at the BAMline, the hard X-ray beam line of the BAM at the synchrotron BESSY II in Berlin. KW - SyXRF Quantifizierung KW - Monte Carlo Simulation KW - Referenzmaterialien PY - 2010 DO - https://doi.org/10.1039/b926596a SN - 0267-9477 SN - 1364-5544 VL - 25 IS - 5 SP - 631 EP - 634 PB - Royal Society of Chemistry CY - London AN - OPUS4-22895 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Constantinescu, B. A1 - Vasilescu, A. A1 - Radtke, Martin A1 - Reinholz, Uwe T1 - A study on gold and copper provenance for romanian prehistoric objects using Micro-SR-XRF T2 - Synchrotron Radiation in Art & Archaeology CY - Amsterdam, Netherlands DA - 2010-11-07 PY - 2010 AN - OPUS4-21324 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Grunewald, Andreas A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Reinholz, Uwe T1 - SRXRF - measurements at non planar objects: Automatic determination of the angle of inicidence of the exciting X-ray T2 - Synchroton Radiation in Art & Avhaelogy (SR2A-2010) CY - Amsterdam, Netherlands DA - 2010-11-07 PY - 2010 AN - OPUS4-21378 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Constantinescu, B. A1 - Radtke, Martin A1 - Bugoi, R. A1 - Vasilescu, A. A1 - Calligaro, Th. A1 - Salomon, J. A1 - Pichon, L. A1 - Röhrs, S. A1 - Ceccato, D. A1 - Pop, D. T1 - Archaeological gold provenance studies based on SR-XRF and micro-PIXE analyses T2 - 20th General Meeting of the International Mineralogical Association (IMA2010) CY - Budapest, Hungary DA - 2010-08-21 PY - 2010 AN - OPUS4-22025 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Christea-Stan, D. A1 - Constantinescu, B. A1 - Vasilescu, A. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Popescu, Gh. A1 - Neacsu, A. A1 - Ceccato, D. T1 - Micro-SR-XRF and micro-PIXE studies for archaeological gold identification - the case of Transylvanian gold T2 - 20th General Meeting of the International Mineralogical Association (IMA2010) CY - Budapest, Hungary DA - 2010-08-21 PY - 2010 AN - OPUS4-22026 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Constantinescu, B. A1 - Vasilescu, A. A1 - Radtke, Martin A1 - Reinholz, Uwe T1 - XRF and micro-SR-XRF studies for Dacian gold jewelry authentication T2 - European Conference on X-Ray Spectrometry CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-23737 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Cuéllar, Pablo A1 - Baeßler, Matthias A1 - Georgi, Steven A1 - Rücker, Werner ED - Triantafyllidis, T. T1 - Special issues for the coupled transient simulation of laterally loaded offshore piles and novel experimental findings T2 - Workshop Gründung von Offshore-Windenergieanlagen CY - Karlsruhe, Germany KW - Offshore pile foundation KW - Cyclic lateral load KW - Pore pressure accumulation KW - Model testing PY - 2010 SN - 0453-3267 IS - 172 SP - 117 EP - 138 CY - Karlsruhe AN - OPUS4-24496 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ehlert, Oliver A1 - Brenneis, Rudolf A1 - Ostermann, Markus A1 - Michaelis, Matthias A1 - Gornushkin, Igor B. A1 - Matiaske, Anna-Maria A1 - Maiwald, Michael A1 - Simon, Franz-Georg A1 - Adam, Christian T1 - Laser-Induzierte Breakdown-Spektroskopie für die Online-Analytik am Lichtbogenofen T2 - Jahrestreffen der ProcessNet-Fachausschüsse Abfallbehandlung und Wertstoffrückgewinnung und Hochtemperaturtechnik, Universität Magdeburg CY - Magdeburg, Germany DA - 2010-02-17 PY - 2010 AN - OPUS4-20932 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Matiaske, Anna-Maria A1 - Scholz, Christoph A1 - Ehlert, Oliver A1 - Gornushkin, Igor B. A1 - Panne, Ulrich T1 - Remote Double pulse LIBS investigation on solid and liquid glass doped with metal oxides T2 - 6Th International Conterence on Laser-Induced Breackdown Spektroskopie- LIBS2010 CY - Memphis, TN, USA DA - 2010-09-13 PY - 2010 AN - OPUS4-22668 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gornushkin, Igor B. A1 - Shabanov, Sergej V. A1 - Merk, Sven A1 - Panne, Ulrich T1 - Model Investigation On Prediction Of Temperature And Electron Density From Emission Spectra Of Laser Induced Plasma T2 - 2010 Winter Conference on Plasma Spectrochemistry Fort Myers CY - Fort Myers, FL, USA DA - 2010-01-04 PY - 2010 AN - OPUS4-22910 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gornushkin, Igor B. A1 - Shabanov, Sergej V. A1 - Merk, Sven A1 - Tognoni, E. A1 - Panne, Ulrich T1 - Boltzmann Plot and Abel Inversion Methods for Plasma Diagnostics: Implications from Plasma Modeling T2 - LIBS 2010 CY - Memphis, TN, USA DA - 2010-09-13 PY - 2010 AN - OPUS4-22912 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gornushkin, Igor B. A1 - Shabanov, Sergej V. A1 - Merk, Sven A1 - Tognoni, E. A1 - Panne, Ulrich T1 - Test for validity of the Boltzmann Plot Method: Implications from Plasma Modeling T2 - FACSS 2010 CY - Raleigh, NC, USA DA - 2010-10-17 PY - 2010 AN - OPUS4-22911 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Merk, Sven A1 - Gornushkin, Igor B. A1 - Panne, Ulrich T1 - Rapid analysis of soil samples for precision agriculture by LIBS T2 - 6Th International Conterence on Laser-Induced Breackdown Spektroskopie LIBS 2010 CY - Memphis, TN, USA DA - 2010-09-13 PY - 2010 AN - OPUS4-22669 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hempel, M. A1 - Ziegler, Mathias A1 - Tomm, J.W. A1 - Elsaesser, T. A1 - Michel, N. A1 - Krakowski, M. T1 - Time-resolved analysis of catastrophic optical damage in 975 nm emitting diode lasers N2 - Catastrophic optical damage (COD) is analyzed during single current pulse excitation of 975 nm emitting diode lasers. Power transients and thermal images are monitored during each pulse. The COD process is unambiguously related to the occurrence of a “thermal flash” of Planck’s radiation. We observe COD to ignite multiple times in subsequent pulses. Thermography allows for tracing a spatial motion of the COD site on the front facet of the devices. The time constant of power decay after the onset of COD has values from 400 to 2000 ns, i.e., an order of magnitude longer than observed for shorter-wavelength devices. KW - Semiconductor laser KW - Thermography KW - Catastrophic optical damage KW - High-power diode lasers PY - 2010 DO - https://doi.org/10.1063/1.3456388 SN - 0003-6951 SN - 1077-3118 VL - 96 IS - 251105 SP - 1 EP - 3 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-21672 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hempel, M. A1 - Tomm, J.W. A1 - Ziegler, Mathias A1 - Elsaesser, T. A1 - Michel, N. A1 - Krakowski, M. T1 - Catastrophic optical damage at front and rear facets of diode lasers N2 - Single-pulse tests of the catastrophic optical damage (COD) are performed for three batches of diode lasers with different gain-regions. The tests involve in situ inspection of front, rear, and side of the devices by a thermocamera. Devices with an Al-containing gain-region show COD at the front facet, as expected for strong facet heating via surface recombination and reabsorption of laser light. In contrast, Al-free devices with low surface recombination rates tend to fail at the rear facet, pointing to a different heating scenario. The high carrier density at the rear facet favors heating and COD via Auger recombination processes. KW - Thermography KW - Catastrophic optical damage KW - High power diode lasers KW - Destructive testing KW - Non-destructive testing KW - Auger effect KW - Carrier density KW - Heating KW - Laser beam effects KW - Optical testing KW - Semiconductor lasers KW - Surface recombination PY - 2010 DO - https://doi.org/10.1063/1.3524235 SN - 0003-6951 SN - 1077-3118 VL - 97 IS - 23 SP - 231101-1 - 231101-3 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-22763 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ziegler, Mathias A1 - Hempel, M. A1 - Larsen, H. E. A1 - Tomm, J. W. A1 - Andersen, P. E. A1 - Clausen, S. A1 - Elliott, S. N. A1 - Elsaesser, T. T1 - Physical limits of semiconductor laser operation: A time-resolved analysis of catastrophic optical damage N2 - The early stages of catastrophic optical damage (COD) in 808 nm emitting diode lasers are mapped by simultaneously monitoring the optical emission with a 1 ns time resolution and deriving the device temperature from thermal images. COD occurs in highly localized damage regions on a 30 to 400 ns time scale which is determined by the accumulation of excess energy absorbed from the optical output. We identify regimes in which COD is avoided by the proper choice of operation parameters. KW - Semiconductor laser KW - Thermography KW - Catastrophic optical damage KW - High-power diode lasers PY - 2010 DO - https://doi.org/10.1063/1.3463039 SN - 0003-6951 SN - 1077-3118 VL - 97 IS - 021110 SP - 1 EP - 3 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-21741 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Dosch, K. T1 - Verbesserung der Materialeffizienz von kleinen und mittleren Unternehmen KW - Materialeffizienz KW - Ressourcenproduktivität KW - Globaler Materialverbrauch PY - 2010 SN - 0043-6275 VL - 90 IS - 11 SP - 754 EP - 759 PB - Springer CY - Berlin ; Heidelberg [u.a.] AN - OPUS4-22412 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Constantinescu, B. A1 - Oberländer-Târnoveanu, E. A1 - Bugoi, R. A1 - Cojocaru, V. A1 - Radtke, Martin T1 - The Sarmizegetusa bracelets N2 - We present the authentication and analysis of these beautiful Dacian bracelets of the first century BC, originally pillaged by treasure hunters and recovered thanks to an international crime chase. They were originally fashioned from gold panned from the rivers or dug from the mines of Transylvania and hammered into the form of coiled snakes. The lack of context is the greatest loss, but a votive purpose is likely given their proximity to the great sacred centre at Sarmizegetusa Regia. KW - Romania KW - Sarmizegetusa KW - Dacian KW - First century BC KW - Gold KW - Bracelets KW - Hoard KW - Sacred centre KW - World heritage site PY - 2010 UR - http://antiquity.ac.uk/ant/084/ant0841028.htm SN - 0003-598x VL - 84 SP - 1028 EP - 1042 PB - Univ. Press CY - Oxford AN - OPUS4-23169 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vasilescu, A. A1 - Constantinescu, B. A1 - Bugoi, R. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Simon, R. ED - Denecke, M. ED - Walker, C. T1 - Gold provenance studies for Romanian archaeological objects using micro-SR-XRF N2 - Studies by Synchrotron Radiation-X-Ray Fluorescence (SR-XRF) for the search of the presence of trace elements like Sb, Sn, Te and Pb in archaeological metallic objects found on the territory of Romania-old coins and Bronze Age jewelry, aimed to determine the provenance of the gold used in their manufacture. The results are compared with the detailed elemental composition of alluvial or primary gold samples, obtained by the same technique. This work attempted to establish the origin of the gold used for the mint of two different types of koson coins. We found that the kosons with monogram are made of refined gold, while the one used for the kosons without monogram is mainly alluvial. The gold used in the manufacture of the Calarasi Vulchitrun-type disk and the Tauteu hair ring is also of alluvial origin. T2 - 20th International congress on X-ray optics and microanalysis CY - Karlsruhe, Germany DA - 2009-09-14 KW - Provenance KW - Gold KW - SR-XRF KW - Trace elements PY - 2010 UR - http://link.aip.org/link/?APCPCS/1221/139/1 SN - 978-0-7354-0764-0 DO - https://doi.org/10.1063/1.3399240 SN - 0094-243X SP - 139 EP - 143 PB - American Institute of Physics AN - OPUS4-21182 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Silbernagl, Dorothee A1 - Cappella, Brunero T1 - Mechanical properties of thin polymer films on stiff substrates N2 - Force–displacement curves have been acquired with a commercial atomic force microscope on thin films of poly(n-butyl methacrylate) on glass substrates in order to examine the so-called 'mechanical double layer' topic, i.e. the influence of the substrate on the mechanical properties of the film in dependence of the film thickness. The hyperbolic fit, a novel semi-empirical equation introduced in previous articles, has been further corroborated. The interpretation of this equation has been deepened, yielding a quantitative and demonstrative characterization of the mechanical properties of double layers. Provided that the Young's moduli of bulk polymer and substrate are measured from the deformation curves, this mathematical model permits to fit the deformation–force curves on the double layers and to determine the thickness of the polymer films in wide range (0–200 nm). KW - Atomic force microscopy KW - Indentation KW - Rheology KW - Polymers KW - Thin films PY - 2010 DO - https://doi.org/10.1002/sca.20196 SN - 0161-0457 SN - 1932-8745 VL - 32 IS - 5 SP - 282 EP - 293 PB - Wiley CY - Hoboken, NJ AN - OPUS4-22681 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schartel, Bernhard T1 - Phosphorus-based flame retardancy mechanisms - Old hat or a starting point for future development? N2 - Different kinds of additive and reactive flame retardants containing phosphorus are increasingly successful as halogen-free alternatives for various polymeric materials and applications. Phosphorus can act in the condensed phase by enhancing charring, yielding intumescence, or through inorganic glass formation; and in the gas phase through flame inhibition. Occurrence and efficiency depend, not only on the flame retardant itself, but also on its interaction with pyrolysing polymeric material and additives. Flame retardancy is sensitive to modification of the flame retardant, the use of synergists/adjuvants, and changes to the polymeric material. A detailed understanding facilitates the launch of tailored and targeted development. KW - Fire retardancy KW - Red phosphorus KW - Phosphate KW - Phosphonate KW - Phosphinate KW - Phosphine oxide KW - Flame inhibition KW - Charring KW - Intumescence PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-220368 DO - https://doi.org/10.3390/ma3104710 SN - 1996-1944 VL - 3 IS - 10 SP - 4710 EP - 4745 PB - MDPI CY - Basel AN - OPUS4-22036 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Unger, M. A1 - Vogel, Christian A1 - Siesler, H.W. T1 - Molecular weight dependence of the thermal degradation of poly(epsilon-caprolactone): A thermogravimetric differential thermal fourier transform infrared spectroscopy study KW - Poly(epsilon-caprolactone) KW - PCL KW - Thermal degradation KW - Thermogravimetric analysis KW - Differential thermal analysis KW - Fourier transform infrared spectroscopy KW - TGA/DTA/FT-IR spectroscopy PY - 2010 SN - 0003-7028 SN - 1943-3530 VL - 64 IS - 7 SP - 805 EP - 809 PB - Society for Applied Spectroscopy CY - Frederick, Md. AN - OPUS4-21618 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vogel, Christian A1 - Adam, Christian A1 - Peplinski, Burkhard A1 - Wellendorf, Stephan T1 - Chemical reactions during the preparation of P and NPK fertilizers from thermochemically treated sewage sludge ashes KW - NPK fertilizer KW - P fertilizer KW - Phosphorus recycling KW - Sewage sludge ash KW - Urban mining PY - 2010 DO - https://doi.org/10.1111/j.1747-0765.2010.00485.x SN - 0038-0768 SN - 1747-0765 VL - 56 IS - 4 SP - 627 EP - 635 PB - Blackwell Publ. Asia CY - Tokyo, Japan AN - OPUS4-21924 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Adam, Christian A1 - Vogel, Christian T1 - Technische Möglichkeiten der Phosphorrückgewinnung aus Klärschlammaschen T2 - VDI-Fachkonferenz "Klärschlammbehandlung - Technologien, Wertstoffrückgewinnung, Entwicklungen" CY - Offenbach, Deutschland DA - 2010-10-27 KW - Klärschlammasche KW - Phosphor KW - Rückgewinnung PY - 2010 SN - 978-3-9813793-2-7 SP - 217 EP - 228 CY - Düsseldorf AN - OPUS4-22338 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Peplinski, Burkhard A1 - Adam, Christian A1 - Vogel, Christian A1 - Adamczyk, Burkart A1 - Menzel, Michael A1 - Simon, Franz-Georg A1 - Emmerling, Franziska A1 - Reuther, H. T1 - First identification of AIPO4 tridymite in a municipal sewage sludge ash T2 - 12. European Powder Diffracion Conference (EPDIC-12) CY - Darmstadt, Germany DA - 2010-08-27 PY - 2010 AN - OPUS4-21968 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Suhendra, Suhendra A1 - Adam, Christian A1 - Vogel, Christian T1 - Granulation of sewage sludge ashes along with biomass ashes and industrial by-product for multinutrient fertilizer production T2 - Jahrestagung Aufbereitung und Recycling CY - Freiberg, Germany DA - 2010-11-10 PY - 2010 AN - OPUS4-22393 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian A1 - Vogel, Christian T1 - Technische Möglichkeiten der Phosphorrückgewinnung aus Klärschlammaschen T2 - VDI Wissensforum Fachkonferenz Klärschlammbehandlung, Technologien - Wertstoffrückgewinnung - Entwicklungen CY - Offenbach am Main, Germany DA - 2010-10-27 PY - 2010 AN - OPUS4-22400 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Peplinski, Burkhard A1 - Adam, Christian A1 - Adamczyk, Burkart A1 - Vogel, Christian A1 - Grabner, Angela A1 - Götze, Ramona A1 - Wellendorf, Stephan A1 - Michaelis, Matthias A1 - Feldmann, Ines A1 - Menzel, Michael A1 - Scholz, G. A1 - Reuther, H. T1 - A comparative study of commercial sewage sludge ashes (SSA) produced at HVC (DRSH) and SNB and of well defined model substances synthesized at BAM by X-ray powder diffraction (XRD) and other analytical techniques (ICP, XRF, SEM & EDX, Mossbauer spectroscopy, 27Al- and 31P solid state NMR) T2 - Meeting mit Industriepartnern des EU-Projekts SUSYPHOS/ Eurostar CY - Dordrecht, Netherlands DA - 2010-06-24 PY - 2010 AN - OPUS4-22445 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Peplinski, Burkhard A1 - Adamczyk, Burkart A1 - Vogel, Christian A1 - Adam, Christian A1 - Krahl, Thoralf A1 - Michaelis, Matthias A1 - Emmerling, Franziska A1 - Scholz, G. T1 - On the fast crystallization of the tridymite form of doped AlPO4 from a mixture of amorphous and crystalline precursor components and the chemical stabilization of its hexagonal high-temperature form at room temperature T2 - 88th Annual Meeting of the German Mineralogical Society CY - Münster, Germany DA - 2010-09-18 PY - 2010 AN - OPUS4-22448 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogel, Christian A1 - Adam, Christian T1 - Phosphate fertilizer from sewage sludge and meat and bone meal - the SUSYPHOS project T2 - EuCheMS CY - Nuremberg, Germany DA - 2010-08-29 PY - 2010 AN - OPUS4-22402 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Perret, Birgit A1 - Schartel, Bernhard T1 - TGA-FTIR: Détermination des mécanismes ignifuges par l´étude de la pyrolyse KW - TGA-FTIR KW - Flammschutz KW - Pyrolyse PY - 2010 VL - 32 SP - 16 EP - 19 AN - OPUS4-23906 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Perret, Birgit A1 - Schartel, Bernhard T1 - TGA-FTIR: From the investigation of pyrolysis to the elucidation of fire retardancy mechanisms KW - TGA-FTIR KW - Flammschutz KW - Pyrolyse PY - 2010 VL - 32 SP - 16 EP - 19 AN - OPUS4-23905 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Braun, Ulrike A1 - Bahr, Horst A1 - Schartel, Bernhard T1 - Fire retardancy effect of aluminium phosphinate and melamine polyphosphate in glass fibre reinforced polyamide 6 N2 - The fire retardancy mechanism of aluminium diethyl phosphinate (AlPi) and AlPi in combination with melamine polyphosphate (MPP) was investigated in glass-fibre reinforced polyamide 6 (PA6/GF) by analysing the pyrolysis, flammability and fire behaviour. AlPi in PA6/GF-AlPi partly vaporises as AlPi and partly decomposes to volatile diethylphosphinic acid (subsequently called phosphinic acid) and aluminium phosphate residue. In fire a predominant gas-phase action was observed, but the material did not reach a V-0 classification for the moderate additive content used. For the combination of both AlPi and MPP in PA6/GF-AlPi-MPP a synergistic effect occurred, because of the reaction of MPP with AlPi. Aluminium phosphate is formed in the residue and melamine and phosphinic acid are released in the gas phase. The aluminium phosphate acts as a barrier for fuel and heat transport, whereas the melamine release results in fuel dilution and the phosphinic acid formation in flame inhibition. The higher amount of aluminium phosphate in PA6/GF-AlPi-MPP stabilised the residue in flammability tests in comparison to PA6/GF-AlPi, so that this material achieved a V-0 classification in the UL 94 test. PY - 2010 DO - https://doi.org/10.1515/epoly.2010.10.1.443 SN - 1618-7229 IS - 041 SP - 1 EP - 14 PB - De Gruyter CY - [S.l.] AN - OPUS4-19821 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fandrich, Nick A1 - Falkenhagen, Jana A1 - Weidner, Steffen A1 - Staal, B. A1 - Thünemann, Andreas A1 - Laschewsky, A. T1 - Characterization of new amphiphilic block copolymers of N-vinylpyrrolidone and vinyl acetate, 2 - chromatographic separation and analysis by MALDI-TOF and FT-IR coupling N2 - PVP-block-PVAc block copolymers were synthesized by controlled radical polymerization applying a RAFT/MADIX system and were investigated by HPLC and by coupling of chromatography to FT-IR spectroscopy and MALDI-TOF MS. Chromatographic methods (LACCC and gradient techniques) were developed that allowed a separation of block copolymers according to their repeating units. The results of the spectroscopic and spectrometric analysis clearly showed transfer between radicals and process solvent. With the use of hyphenated techniques differences between main and side products were detected. In agreement with previously published results, obtained by NMR, SEC, static light scattering and MALDI-TOF MS, our data proved a non-ideal RAFT polymerization. KW - Amphiphiles KW - Block copolymers KW - Liquid chromatography KW - MALDI KW - Reversible addition fragmentation chain transfer (RAFT) KW - Liquid adsorption chromatography at critical conditions KW - Gradient chromatography KW - MALDI-TOF mass spectrometry KW - Hyphenated techniques KW - Mechanism of polymerization PY - 2010 DO - https://doi.org/10.1002/macp.201000044 SN - 1022-1352 SN - 1521-3935 VL - 211 IS - 15 SP - 1678 EP - 1688 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-22012 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Karrasch, Andrea A1 - Wawrzyn, Eliza A1 - Schartel, Bernhard A1 - Jäger, Christian T1 - Solid-state NMR on thermal and fire residues of bisphenol A polycarbonate/silicone acrylate rubber/bisphenol A bis(diphenyl-phosphate)/(PC(SiR/BDP) and PC/SiR/BDP/zinc borate (PC/SiR/BDP/ZnB) - Part 1: PC charring and the impact of BDP and ZnB N2 - Structural changes in the condensed phase of bisphenol A polycarbonate (containing 0.45 wt% poly (tetrafluoroethylene))/silicone acrylate rubber/bisphenol A bis(diphenyl-phosphate) (PC/SiR/BDP) and PC/SiR/BDP/zinc borate (PC/SiR/BDP/ZnB) during thermal treatment in nitrogen atmosphere and in fire residues were investigated by solid-state NMR. H-1, B-11, C-13 and P-31 NMR experiments using direct excitation with a single pulse and H-1-P-31 cross-polarization (CP) were carried out including 31P(1 H) and C-13{P-31}double-resonance techniques (REDOR: Rotational Echo Double Resonance) on a series of heat-treated samples (580 K-850 K). Because many amorphous phases occur in the solid residues, and solid-state NMR spectroscopy addresses the most important sites carbon, phosphorus and boron, this paper is the key analytical approach for understanding the pyrolysis and flame retarding phenomenon in the condensed phase of PC/SiR/BDP and PC/SiR/BDP/ZnB. For the system PC/SiR/BDP it is shown that (i) at temperatures around 750-770 K (main decomposition step) carbonaceous charring of PC occurs and arylphosphate structures are still present, reacted in part with the decomposing PC; (ii) for higher temperatures from 770 K the phosphorus remaining in the solid phase increasingly converts to amorphous phosphonates and inorganic orthophosphates with a minor amount of crystalline orthophosphates; and (iii) H-1-P-31{H-1} CP REDOR and H-1-C-13{P-31} CP REDOR NMR experiments suggest that the phosphates and phosphonates are bound via oxygen to aromatic carbons, indicating the interaction with the carbonaceous char. When ZnB is added to the system PC/SiR/BDP, (i) ZnB leads to a slightly enhanced PC decomposition for temperatures below 750 K; (ii) alpha-Zn-3(PO4)(2) and borophosphate (BPO4) are formed in small amounts at high temperatures suggesting a reaction between BDP and ZnB during thermal decomposition; and (iii) most of the borate remains in the solid residues, forming an amorphous pure borate network, with the BO3/BO4 ratio increasing with higher temperatures. The NMR data of thermal and fire residues are highly correlated, underlining the importance of this work for understanding the pyrolysis and flame retardancy mechanisms in the condensed phase during the burning of the PC/SiR blends. (C) 2010 Elsevier Ltd. All rights reserved. KW - Flame retardance KW - NMR KW - Polycarbonate (PC) blends KW - Bisphenol-A bis(diphenyl)phosphate (BDP) KW - Zinc borate PY - 2010 DO - https://doi.org/10.1016/j.polymdegradstab.2010.07.034 SN - 0141-3910 SN - 1873-2321 VL - 95 IS - 12 SP - 2525 EP - 2533 PB - Applied Science Publ. CY - London AN - OPUS4-22647 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pawlowski, Kristin A1 - Schartel, Bernhard A1 - Fichera, Mario Augusto A1 - Jäger, Christian T1 - Flame retardancy mechanisms of bisphenol A bis(diphenyl phosphate) in combination with zinc borate in bisphenol A polycarbonate/Acrylonitrile-butadiene-styrene blends N2 - Bisphenol A polycarbonate/acrylonitrile–butadiene–styrene (PC/ABS) with and without bisphenol A bis(diphenyl phosphate) (BDP) and 5 wt.% zinc borate (Znb) were investigated. The pyrolysis was studied by thermogravimetry (TG), TG-FTIR and NMR, the fire behaviour with a cone calorimeter applying different heat fluxes, LOI and UL 94. Fire residues were examined with NMR. BDP affects the decomposition of PC/ABS and acts as a flame retardant in the gas and condensed phases. The addition of Znb results in an additional hydrolysis of PC. The fire behaviour is similar to PC/ABS, aside from a slightly increased LOI and a reduced peak heat release rate, both caused by borates improving the barrier properties of the char. In PC/ABS + BDP + Znb, the addition of Znb yields a borate network and amorphous phosphates. Znb also reacts with BDP to form alpha-zinc phosphate and borophosphates that suppress the original flame retardancy mechanisms of BDP. The inorganic–organic residue formed provides more effective flame retardancy, in particular at low irradiation in the cone calorimeter, and a clear synergy in LOI, whereas for more developed fires BDP + Znb become less effective than BDP in PC/ABS with respect to the total heat evolved. KW - Flame retardancy KW - PC/ABS KW - Aryl phosphate KW - Zinc borate KW - Flammability PY - 2010 DO - https://doi.org/10.1016/j.tca.2009.10.007 SN - 0040-6031 SN - 1872-762X VL - 498 IS - 1-2 SP - 92 EP - 99 PB - Elsevier CY - Amsterdam AN - OPUS4-20746 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schartel, Bernhard A1 - Weiß, André T1 - Temperature inside burning polymer specimens: Pyrolysis zone and shielding N2 - On the basis of two examples, temperature measurements are proposed within burning polymer specimen during the cone calorimeter test; especially to gain deeper insight into the actual pyrolysis conditions and flame retardancy mechanism. The heating and pyrolysis within a poly(methyl methacrylate) specimen were characterized, discussing the characteristic maximum heating rates (165-90°Cmin-1 decreasing with depth within the specimen and >275°Cmin-1 at the initial surface), pyrolysis temperature (454-432°C decreasing in accordance with decreasing heating rates), thickness of the pyrolysis zone (0.5-1.3 mm) and its velocity (1.2-2.1 mm min-1) as a function of sample depth and burning time. Thermally thick behaviour corresponds to a pyrolysis zone thickness of 0.74 mm and a velocity of 1.51 mm min-1 and occurs until the remaining specimen thickness is less than 8 mm. The shielding effect against radiation occurring in a layered silicate epoxy resin nanocomposite was investigated. It is the main flame retardancy effect of the silicate-carbon surface layer formed under fire. The reradiation from the hot surface is increased by a factor of around 4-5 when an irradiance of 70kWm-2 is applied. The energy impact into the pyrolysis zone is crucially reduced, resulting in a reduction of fuel production and thus heat release rate. KW - Cone calorimeter KW - Pyrolysis KW - Nanocomposite KW - Poly(methyl methacrylate) KW - Pyrolysis zone KW - Pyrolysis front KW - Shielding effect PY - 2010 DO - https://doi.org/10.1002/fam.1007 SN - 0308-0501 SN - 1099-1018 VL - 34 IS - 5 SP - 217 EP - 235 PB - Heyden CY - London AN - OPUS4-21724 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kempel, Florian A1 - Schartel, Bernhard A1 - Hofmann-Böllinghaus, Anja A1 - Linteris, G.T. A1 - Lyon, R.E. A1 - Walters, R.N. A1 - Stoliarov, S.I. T1 - Numerical simulation of polymer materials in standard fire tests: Pyrolysis and the impact of residue formation T2 - Interflam 2010 - 12th International conference CY - Nottingham, UK DA - 2010-07-05 KW - Cone calorimeter KW - Poly(butylene terephtalate) PBT KW - FDS KW - ThermaKin PY - 2010 SN - 978-0-9541216-5-5 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. VL - 1 SP - 451 EP - 462 PB - Interscience Communications CY - London, UK AN - OPUS4-21668 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gallo, Emanuela A1 - Schartel, Bernhard A1 - Braun, Ulrike A1 - Russo, P. A1 - Acierno, Domenico T1 - Synergistic flame retardant halogen-free combination of aluminium phosphinate and metal oxides in PBT T2 - Interflam 2010 - 12th International conference CY - Nottingham, UK DA - 2010-07-05 KW - Poly(butylene terephthalate) KW - Metal oxide KW - Phosphinate KW - Flammability PY - 2010 SN - 978-0-9541216-5-5 VL - 1 SP - 629 EP - 640 PB - Interscience Communications CY - London, UK AN - OPUS4-21669 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Perret, Birgit A1 - Schartel, Bernhard A1 - Stöß, K. A1 - Diederichs, J. A1 - Ciesielski, M. A1 - Döring, M. A1 - Krämer, J. A1 - Altstädt, V. T1 - Novel phosphorus-based flame retardants for epoxy resins and carbon fiber composites: Decomposition mechanisms and fire behavior T2 - 21th Annual Conference Recent Advances in Flame Retardancy of Polymeric Materials CY - Stamford, CT, USA DA - 2010-05-24 PY - 2010 AN - OPUS4-21431 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jäger, Christian A1 - Karrasch, Andrea A1 - Schartel, Bernhard T1 - Thermal Decomposition of Flame-Retarded Polycarbonat / Silicon Rubber Blends: A Solid-State NMR Investigation T2 - Festkörper-NMR-Methoden und Anwendungen in der Materialforschung, Seminar der Universität Tübingen CY - Bad Hindelang, Germany DA - 2010-07-18 PY - 2010 AN - OPUS4-21679 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kempel, Florian A1 - Schartel, Bernhard A1 - Hofmann-Böllinghaus, Anja A1 - Butler, K.M. A1 - Onate, E. A1 - Idelsohn, S.R. A1 - Rossi, R. A1 - Marti, J.M. T1 - Numerical simulation of polymeric materials in UL 94 test: competition of gasification and melt flow/dripping T2 - Interflam 2010 CY - Nottingham, England DA - 2010-07-05 PY - 2010 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. AN - OPUS4-21722 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kempel, Florian A1 - Schartel, Bernhard A1 - Hofmann-Böllinghaus, Anja A1 - Linteris, G.T. A1 - Lyon, R.E. A1 - Walters, R.N. A1 - Stoliarov, S. I. T1 - Numerical simulation of polymer materials in standard fire tests: pyrolysis and the impact of residue formation T2 - Interflam 2010 CY - Nottingham, England DA - 2010-07-05 PY - 2010 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. AN - OPUS4-21721 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jäger, Christian A1 - Karrasch, Andrea A1 - Schartel, Bernhard T1 - Thermal Decomposition of Flame-Retarded Polycarbonat / Silicon Rubber Blends: A Solid-State NMR Investigation T2 - 52. Rocky Mountain Conference on Analytical Chemistry CY - Snowmass, CO, USA DA - 2010-08-01 PY - 2010 AN - OPUS4-21680 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Perret, Birgit A1 - Schartel, Bernhard A1 - Wawrzyn, Eliza A1 - Richter, K. H. A1 - Seefeldt, Henrik T1 - Halogen-free flame retarded Bisphenol a polycarbonate blends T2 - 10th European Symposium on Polymer Blends CY - Dresden, Germany DA - 2010-03-07 PY - 2010 AN - OPUS4-21034 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schartel, Bernhard A1 - Weiß, André A1 - Mohr, F. A1 - Kleemeier, M. A1 - Hartwig, A. A1 - Braun, Ulrike T1 - Flame retarded epoxy resins by adding layered silicate in combination with the conventional protection-layer-building flame retardants melamine borate and ammonium polyphosphate N2 - The pyrolysis and flammability of phosphonium-modified layered silicate epoxy resin nanocomposites (EP/LS) were evaluated when LS was combined with two flame retardants, melamine borate (MB) and ammonium polyphosphate (APP), that also act via a surface protection layer. Thermogravimetry (TG), TG coupled with Fourier Transform Spectroscopy (TG-FTIR), oxygen index (LOI), UL 94 burning chamber (UL 94) and cone calorimeter were used. The glassy coating because of 10 wt % MB during combustion showed effects in the cone calorimeter test similar to nanodispersed LS, and somewhat better flame retardancy in flammability tests, such as LOI and UL 94. Adding APP to EP resulted in intumescent systems. The fire retardancy was particularly convincing when 15 wt % APP was used, especially for low external heat flux, and thus, also in flammability tests like LOI and UL 94. V0 classification is achieved when 15 wt % APP is used in EP. The flame retardancy efficiency of the protection layers formed does not increase linearly with the MB and APP concentrations used. The combination of LS with MB or APP shows antagonism; thus the performance of the combination of LS with MB or APP, respectively, was disappointing. No optimization of the carbonaceous-inorganic surface layer occurred for LS-MB. Combining LS with APP inhibited the intumescence, most probably through an increase in viscosity clearly above the value needed for intumescent behavior. KW - Nanocomposites KW - Fire retardance KW - Thermosets KW - Organoclay KW - Ammonium polyphosphate KW - Melamine borate PY - 2010 DO - https://doi.org/10.1002/app.32512 SN - 0021-8995 SN - 1097-4628 VL - 118 IS - 2 SP - 1134 EP - 1143 PB - Wiley InterScience CY - Hoboken, NJ AN - OPUS4-21725 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fandrich, Nick A1 - Falkenhagen, Jana A1 - Weidner, Steffen A1 - Pfeifer, Dietmar A1 - Staal, B. A1 - Thünemann, Andreas A1 - Laschewsky, A. T1 - Characterization of new amphiphilic block copolymers of N-vinyl pyrrolidone and vinyl acetate, 1 - analysis of copolymer composition, end groups, molar masses and molar mass distributions N2 - New amphiphilic block copolymers consisting of N-vinyl pyrrolidone and vinyl acetate were synthesized via controlled radical polymerization using a reversible addition/fragmentation chain transfer (RAFT)/macromolecular design via the interchange of xanthates (MADIX) system. The synthesis was carried out in 1,4-dioxane as process solvent. In order to get conclusions on the mechanism of the polymerization the molecular structure of formed copolymers was analysed by means of different analytical techniques. 13C NMR spectroscopy was used for the determination of the monomer ratios. End groups were analysed by means of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. This technique was also used to determine possible fragmentations of the RAFT end groups. By means of a combination of size exclusion chromatography, 13C NMR and static light scattering molar mass distributions and absolute molar masses could be analysed. The results clearly show a non-ideal RAFT mechanism. KW - Amphiphiles KW - Block copolymers KW - Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOF MS) KW - N-vinyl pyrrolidone KW - Reversible addition/fragmentation chain transfer (RAFT) PY - 2010 DO - https://doi.org/10.1002/macp.200900466 SN - 1022-1352 SN - 1521-3935 VL - 211 IS - 8 SP - 869 EP - 878 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-21905 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schartel, Bernhard A1 - Bahr, Horst A1 - Braun, Ulrike A1 - Recknagel, Christoph T1 - Short communication: Fire risks of burning asphalt N2 - Eyewitnesses describe burning pavement surfaces in extreme fire scenarios. However, it was believed that the pavement plays a negligible role in comparison to other items feeding such an extreme fire at the same time. The asphalt mixtures used differ widely, thus raising the question as to whether this conclusion holds for all kinds of such materials. Three different kinds of asphalt mixtures were investigated with the aim of benchmarking the fire risks. Cone calorimeter tests are performed at an irradiance of 70kWm-2. All three investigated asphalts burn in extreme fire scenarios. The fire response (fire load, time to ignition, maximum heat release rate and smoke production) is quite different and varies by factors of up to 10 when compared to each other. The fire load per mass is always very low due to the high content of inert minerals, whereas the effective heat of combustion of the volatiles is quite typical of non-flame retarded organics. The heat release rate and fire growth indices are strongly dependent on the fire residue and thus the kind of mineral filler used. Comparing with polymeric materials, the investigated Mastic Asphalt and Stone Mastic Asphalt may be called intrinsically flame resistant, whereas the investigated Special Asphalt showed a pronouncedly greater fire risk with respect to causing fire growth and smoke. Thus the question is raised as to whether the use of certain kinds of asphalts in tunnels must be reconsidered. Apart from the binder used, the study also indicates varying the kind of aggregate as a possible route to eliminate the problem. KW - Asphalt KW - Cone calorimeter KW - Fire behaviour PY - 2010 DO - https://doi.org/10.1002/fam.1027 SN - 0308-0501 SN - 1099-1018 VL - 34 IS - 7 SP - 333 EP - 340 PB - Heyden CY - London AN - OPUS4-22172 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Braun, Ulrike A1 - Wachtendorf, Volker A1 - Geburtig, Anja A1 - Bahr, Horst A1 - Schartel, Bernhard T1 - Weathering resistance of halogen-free flame retardance in thermoplastics N2 - The influence of weathering on the fire retardancy of polymers is investigated by means of a cone calorimeter test, before and after artificial weathering. The surface degradation was monitored using different techniques (ATR–FTIR, microscopy, colour measurement). Different kinds of polymeric materials were chosen, all as they are used in practice: polycarbonate (PC) blends, polyamide (PA) and polypropylene (PP) flame-retarded with arylphosphate, melamine cyanurate (MC) and intumescent formulation based on ammonium polyphosphate (APP), respectively. All samples show material degradation at the surface due to weathering. No significant weathering influence occurs on the flame retardancy when it is a bulk property, as was observed for aryl phosphates in PC blends and MC in PA. When the fire retardancy is dominated by a surface mechanism, dependence on the duration of weathering is detected: for intumescent formulations based on ammonium APP in PP, a worsening in the formation of the intumescent network was observed. KW - Fire retardancy KW - Weathering resistance KW - Degradation KW - Intumescence KW - Cone calorimeter PY - 2010 DO - https://doi.org/10.1016/j.polymdegradstab.2010.08.020 SN - 0141-3910 SN - 1873-2321 VL - 95 IS - 12 SP - 2421 EP - 2429 PB - Applied Science Publ. CY - London AN - OPUS4-22612 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gruendling, T. A1 - Weidner, Steffen A1 - Falkenhagen, Jana A1 - Barner-Kowollik, C. T1 - Mass spectrometry in polymer chemistry: a state-of-the-art up-date N2 - Two decades after the introduction of matrix assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI), soft ionization mass spectrometry represents a powerful toolset for the structural investigation of synthetic polymers. The present review highlights the current state-of-the-art, covering the latest developments of novel techniques, enabling instrumentation as well as the important applications of soft ionization MS from the beginning of 2008. Special attention is paid to the role that soft ionization MS has played in the mechanistic investigation of radical polymerization processes since 2005. KW - Polymerization mechanisms KW - Mass spectrometry KW - LC-MS coupling PY - 2010 DO - https://doi.org/10.1039/b9py00347a SN - 1759-9954 SN - 1759-9962 VL - 1 IS - 5 SP - 599 EP - 617 AN - OPUS4-21906 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Perret, Birgit A1 - Schartel, Bernhard A1 - Stöß, K. A1 - Diederichs, J. A1 - Ciesielski, M. A1 - Döring, M. A1 - Krämer, J. A1 - Altstädt, V. ED - Lewin, M. T1 - Novel phosphorus-based flame retardants for epoxy resins and carbon fiber composites: Decomposition mechanisms and fire behavior T2 - 21st Annual conference on recent advances on flame retardancy of polymeric materials CY - Stamford, USA DA - 2010-05-24 KW - DOPO KW - Fire retardancy KW - Flammability KW - Pyrolysis KW - Epoxy resin KW - Composites PY - 2010 SN - 1-59623-619-1 VL - 21 SP - 134 EP - 145 PB - BCC Research AN - OPUS4-22162 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kempel, Florian A1 - Hofmann-Böllinghaus, Anja A1 - Schartel, Bernhard A1 - Krause, Ulrich T1 - Investigations on a real fire case with downward fire spread in a family home T2 - 11th International symposium on fire protection CY - Leipzig, Germany DA - 2010-06-08 KW - Fire spread KW - Heat release rate KW - Fire simulation KW - Foam mattress PY - 2010 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. SP - 1 EP - 12 AN - OPUS4-22354 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, M. A1 - Wagner, S. A1 - Bykov, Y. A1 - Müller, Patrick A1 - Schäfer, A. A1 - Zang, L. A1 - Schartel, Bernhard A1 - Perret, Birgit A1 - Altstädt, V. T1 - Non-halogenated Flame Retardant Epoxy Resins and their Fiber Reinforced Composites T2 - International Symposium on Flame-Retardant Materials & Technologies 2010 CY - Chengdu, China DA - 2010-09-17 PY - 2010 AN - OPUS4-22718 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Falkenhagen, Jana A1 - Weidner, Steffen T1 - Hyphenated Characterization TEchniques for Polymers: From LC/MALDI- and UPLC/ESI-TOF-MS to CID tandem mass spectrometry T2 - 11th Int. Symp. on Hyphenated Techniques in Chromatography CY - Amsterdam, Netherlands DA - 2010-01-27 PY - 2010 AN - OPUS4-21965 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schartel, Bernhard T1 - Bench scale methods in flame-retarded polymers development - Labormethoden zur Entwicklung flammgeschützter Polymere T2 - 11th National and 1st International Conference Trends in Fire Dafety and Innovative Flame Retardants for Plastics CY - Würzburg, Germany DA - 2010-11-24 PY - 2010 AN - OPUS4-23414 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gallo, Emanuela A1 - Acierno, Domenico A1 - Russo, P. A1 - Schartel, Bernhard T1 - Fire behaviour and thermal analysis of poly(hydroxybutyrate-co-valerate) based compounds T2 - 6th International Conference on Modification, Degradation and Stabilization of Polymers (MODEST) CY - Athens, Greece DA - 2010-09-05 PY - 2010 AN - OPUS4-22106 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramanujam, Maalolan A1 - Friedrich, Jörg F. A1 - Mix, Renate A1 - Wachtendorf, Volker A1 - Falkenhagen, Jana T1 - Effect of UV Radiation and Moisture on the Ageing of artificially weathered PE and PMMA T2 - Austrian - Slovenian Polymer Meeting 2010 CY - Leoben, Austria DA - 2010-09-08 PY - 2010 AN - OPUS4-23243 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Perret, Birgit A1 - Schartel, Bernhard T1 - TGA-FTIR: Von der Untersuchung der Pyrolyse zur Aufklärung von Flammschutzmechanismen KW - TGA-FTIR KW - Flammschutz KW - Pyrolyse PY - 2010 VL - 32 SP - 16 EP - 19 AN - OPUS4-23904 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Weidner, Steffen A1 - Falkenhagen, Jana ED - Li, L. T1 - LC-MALDI MS for polymer characterization KW - Mass spectrometry KW - Polymers PY - 2010 SN - 978-0-471-77579-9 N1 - Serientitel: Chemical analysis: a series of monographs on analytical chemistry and its applications – Series title: Chemical analysis: a series of monographs on analytical chemistry and its applications VL - 175 IS - Chapter 11 SP - 247 EP - 265 PB - John Wiley & Sons AN - OPUS4-26406 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -