TY - CONF A1 - Woydt, Mathias A1 - Kelling, Norbert A1 - Hartelt, Manfred A1 - Igartua, A. A1 - Areitioaurtena, O. A1 - Seyfert, C. A1 - Luther, R. ED - Bartz, Wilfried J. T1 - Tribological performance of bio-no-tox engine oils and new triboactive materials for piston ring/cylinder liner systems T2 - 15th International colloquium tribology - Automotive and Industrial Lubrication CY - Ostfildern, Germany DA - 2006-01-17 PY - 2006 SN - 3-924813-62-0 SP - Paper 15_E7_Woydt_Bio-no-tox, 1-6 CY - Ostfildern AN - OPUS4-31761 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias A1 - Kelling, Norbert T1 - Zylinderlaufbahnen aus Aluminiumlegierungen und deren tribologische Weiterentwicklungen durch Schmierstoffe und Metallurgie T2 - 47. Tribologie-Fachtagung - Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen CY - Göttingen, Germany DA - 2006-09-25 KW - Kolbenring KW - Zylinderlaufbahn KW - AlSi KW - Aluminium KW - Triboaktive Werkstoffe PY - 2006 SN - 3-00-019670-6 VL - II SP - 71/1 EP - 71/11 CY - Aachen AN - OPUS4-31764 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Waschki, Clemens T1 - Kraftfahrzeugrückhaltesysteme und deren sprengstoffrechtliche Zulassung T2 - Workshop für Rettungskräfte beim Internationalen Symposium "Airbag 2006" CY - Karlsruhe, Germany DA - 2006-12-04 PY - 2006 AN - OPUS4-30879 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kind, Thomas T1 - Entwicklung eines Radarantennenarrays zur Untersuchung des Untergrundes im Schottergleisbett N2 - Die Erarbeitung der Grundlagen für effiziente und bedarfsgerechte Instandsetzungsmaßnahmen an Schottergleisbetten ist das Ziel des Projektes „SafeRail“. Das Impulsradarverfahren wird als zerstörungsfreie Methode für die Zustandsbestimmung des Schotters verwendet, um entsprechend den hohen Anforderungen der Netzbetreiber Unterbrechungen des Schienenverkehrs weitgehend zu vermeiden. Für eine automatisierte Bewertung der Vermischung des Schotters mit dem Untergrund sowie des Abnutzungszustandes des Schotters wird ein Antennenarray entwickelt, das bezüglich seiner Messgeometrie optimiert wird. T2 - Fachtagung Bauwerksdiagnose 2006 - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Germany DA - 23.02.2006 KW - Radar KW - Zerstörungsfreie Prüfung PY - 2006 SN - 3-931381-71-4 VL - 100 SP - 1 EP - 6 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) CY - Berlin AN - OPUS4-39824 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kind, Thomas A1 - Maierhofer, Christiane T1 - Railway Ballast Fouling Inspection by Monitoring the GPR Propagation Velocity with a Multi-Offset Antenna Array N2 - In this paper, a new method for the investigation of the degradation of ballast railway track beds is proposed. An array of antennas is used for simultaneous acquisition of reflected radar impulses, which have been transmitted from different sending positions. This array setup allows an automated CMP-measurement, which enables a direct calibration of the ballast thickness. These multiple offset measurements using the array setup are well suited for fast railway inspections. The method offers the possibility to visualize the state of degradation of the ballast in a velocity spectrum. T2 - 11th International Conference on Ground Penetrating Radar, the Ohio State University CY - Columbus, Ohio, USA DA - 19.06.2006 KW - Radar KW - Non-destructive testing KW - Railroad PY - 2006 SP - 1 EP - 4 CY - Columbus, Ohio AN - OPUS4-39825 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR ED - Wloka, Monika T1 - DAR-aktuell - Kurzinformation - Akkreditierung, Zertifizierung, Prüfung - Jahrgang 14, Ausgabe 1 N2 - Die hier vorliegende Kurzinformation hat das Ziel, über Neues auf dem Gebiet der Akkreditierung, Zertifizierung und Prüfung in Deutschland und Europa sowie über Inhalte und Ergebnisse der Arbeit verschiedener auf diesem Sektor tätigen Organisationen zu informieren. N2 - The aim of this newsletter is to inform about new developments in the area of accreditation, certification and testing in Germany and Europe as well as about topics and results of the work of several organisations that are active in this sector. PY - 2006 SN - 1436-154X SN - 1436-1558 SN - 1436-2082 N1 - Volltext (PDF) in deutsch und englisch - Full text (PDF) in German and English VL - 14 IS - 1 SP - 1 EP - 4 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-40199 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN ED - Wloka, Monika T1 - DAR-aktuell - Kurzinformation - Akkreditierung, Zertifizierung, Prüfung - Jahrgang 14, Ausgabe 2 T1 - DAR-aktuell - newsletter - accreditation, certification, testing - volume 14, edition 2 N2 - Die hier vorliegende Kurzinformation hat das Ziel, über Neues auf dem Gebiet der Akkreditierung, Zertifizierung und Prüfung in Deutschland und Europa sowie über Inhalte und Ergebnisse der Arbeit verschiedener auf diesem Sektor tätigen Organisationen zu informieren. N2 - The aim of this newsletter is to inform about new developments in the area of accreditation, certification and testing in Germany and Europe as well as about topics and results of the work of several organisations that are active in this sector. PY - 2006 SN - 1436-154X SN - 1436-1558 SN - 1436-2082 N1 - Volltext (PDF) in deutsch und englisch - Full text (PDF) in German and English VL - 14 IS - 2 SP - 1 EP - 4 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-40204 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Häcker, Ralf T1 - Zuverlässige Ermittlung von Kennwerten an Stählen bei hohen Dehngeschwindigkeiten T2 - DVM-Tag 2006 "Werkstoffkennwerte: Basis für Bauteilauslegung und Simulation" CY - Berlin DA - 2006-05-09 PY - 2006 AN - OPUS4-33297 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hübert, Thomas A1 - Banach, Ulrich T1 - Validation of sensors for the determination of humidity in compressed gases N2 - Five miniaturized sensors based on dew-point, capacitance or resistance measurement were tested for the detection of humidity in compressed gases. The dew-point sensors with optical or dielectric detection of condensation were used at gas pressures up to 3 MPa in dew-point range of -20 to 70°C and show no systematic deviation and an uncertainty of dew-point temperature mostly less than 1 K. The LiCl sensor has also a low uncertainty but exhibit a systematic deviation to higher values of dew-point. Capacitive polymer sensors can indicate also a dew-point, even down to -70 °C and have an uncertainty of about 1 to 2 K. The oxide sensor works in the dew-point range of -10 to 20°C and has a signal what exponential decreases with increasing gas pressure up to 10 MPa. All types of sensor can be applied in compressed gases at least up to 3 MPa, but their different change of sensor signal due to the gas pressure has to be considered. T2 - 5th International Symposium on Humidity and Moisture (ISHM 2006 Brazil) CY - Rio de Janeiro, Brazil DA - 2006-05-02 KW - Pressure dew-point KW - Humidity sensor KW - Validation PY - 2006 SN - 978-85-86920-04-2 IS - Paper 110 SP - 1 EP - 5 AN - OPUS4-18578 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hübert, Thomas A1 - Svoboda, S. A1 - Oertel, B. T1 - Wear resistant alumina coatings produced by a sol-gel process N2 - Aluminium oxide films were prepared by a dip-coating procedure from solutions of hydrolysed aluminium-tri-sec-butoxide in methoxyethanol on austenitic steel as well as hard metal tools. The heat treatment was performed in an argon atmosphere or vacuum at temperatures up to 1100 °C. Characterisation of the coatings by SEM, showed nearly crack free coatings with a dense morphology which completely cover the substrate. The chemical composition of the coatings was investigated by ESCA, GD-OES and XRD measurements. This analysis detected a multi-layered arrangement of spinel phases, ?- and ?-alumina in the coatings. The scratch test showed sufficient adhesion of the coatings comparable to CVD layers. Pin-on-disc and oscillating sliding tests were carried out on sol–gel coated samples and also on uncovered reference samples. The determined wear rates and friction coefficients showed significant improvement in wear resistance of sol–gel coatings containing a corundum phase. The strong adhesion to the substrates is due to a layered assembly formation and gradient composition of the coating caused by an interdiffusion of metal cations and oxygen in the metal/oxide interface during heat treatment. KW - Oxide film formation KW - Film analysis KW - Wear resistance PY - 2006 DO - https://doi.org/10.1016/j.surfcoat.2005.11.014 SN - 0257-8972 VL - 201 IS - 1-2 SP - 487 EP - 491 PB - Elsevier Science CY - Lausanne AN - OPUS4-18583 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Österle, Werner A1 - Müller, Urs A1 - Desplanques, Y. A1 - Bulthé, A.-L. A1 - Degallaix, G. A1 - Dmitriev, A.I. T1 - 3rd Body formation of two different brake pad materials designed for railway application T2 - 5th European Conference on Braking (JEF 2006) CY - Lille, France DA - 2006-11-08 PY - 2006 SP - 107 EP - 115 AN - OPUS4-18699 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rohrmann, Rolf T1 - Forschungsprojekt IMO-WIND T2 - Öffentliches Status-Seminar zum Forschungsprojekt IMO-WIND CY - Bremen, Germany DA - 2006-11-21 PY - 2006 AN - OPUS4-18629 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Österle, Werner A1 - Dmitriev, A.I. A1 - Urban, Ingrid ED - Jayashree Bijwe, T1 - Characterization of up to date brake friction materials T2 - IWAAFC-1, International Workshop on Advances in Asbestos free Friction Composites CY - Delhi, India DA - 2006-01-05 PY - 2006 SP - 21 EP - 35 CY - Delhi, India AN - OPUS4-18700 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Körner, Ursula T1 - Nur die beste Verpackung ist gut genug - Leitfaden zur Beurteilung mängelbehafteter Versandstücke im Luftverkehr KW - Gefahrgut KW - Versandstück KW - Verpackung KW - Leitfaden KW - Mangel KW - Schaden KW - Beschädigung KW - Schädigungsstufe PY - 2006 SN - 0941-6080 IS - 2 SP - 17 EP - 23 PB - Verl. TÜV Rheinland CY - Köln AN - OPUS4-18735 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gradt, Thomas A1 - Aßmus, Kristin T1 - Tribological Behaviour of Solid Lubricants at Low Temperatures N2 - Supporting elements between large superconducting magnets like the field coils in WENDELSTEIN 7-X have to sustain high loads while allowing a certain amount of tangential movement without any stick-slip motion. In model tests with reciprocating friction in liquid helium and vacuum a PVD-MoS2-coating has proven its suitability for these components. It showed a very stable sliding behaviour with a friction coefficient below 0.1 without coating failure under all test conditions. KW - Tribologie KW - Festschmierstoffe KW - MoS2 KW - Kryotechnik KW - Vakuumtechnik KW - Kernfusion PY - 2006 SN - 978-80-239-8883-3 VL - 1 SP - 173 EP - 176 CY - Prague, Czech Republic AN - OPUS4-17398 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - McInerney, T.-J. A1 - Madigan, R.B. A1 - Xu, Ping A1 - Cross, Carl Edward ED - Stan A. David, ED - Tarasankar DebRoy, ED - John C. Lippold, ED - Herschel B. Smartt, ED - John M. Vitek, T1 - Achieving grain refinement through weld pool oscillation T2 - 7th International Conference on Trends in Welding Research CY - Pine Mountain, GA, USA DA - 2005-05-16 KW - Aluminium Alloy KW - Grain Refinement KW - Weld Pool Oscillation KW - Frequency Amplitude Range KW - Alloy 2219 PY - 2006 SN - 978-0-87170-842-7 SP - 17 EP - 22 PB - ASM International CY - Materials Park, Ohio AN - OPUS4-18040 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Habel, Wolfgang ED - Hartmut Janocha, T1 - Fiber Optic Sensors PY - 2006 SN - 978-3-540-71965-6 IS - Chapter 7.2 SP - 319 EP - 342 PB - Springer AN - OPUS4-18043 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert T1 - Research in NDT-CE at BAM Berlin T2 - NDT Conference JSNT CY - Tokyo, Japan DA - 2006-08-01 PY - 2006 AN - OPUS4-18013 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert T1 - Research in NDT-CE at BAM Berlin T2 - Seminar University of Texas at El Paso CY - El Paso, TX, USA DA - 2006-08-09 PY - 2006 AN - OPUS4-18014 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert T1 - Research in NDT-CE at BAM Berlin T2 - Seminar Wayne State University CY - Detroit, MI, USA DA - 2006-08-21 PY - 2006 AN - OPUS4-18015 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja A1 - Trubiroha, Peter ED - Ziegahn, K.-F. T1 - Grundsätzliches zur Verkürzung von Bewitterungstests durch künstliche Bewitterung T2 - 35. Jahrestagung der GUS 2006 - Umwelteinflüsse erfassen, simulieren, bewerten CY - Pfinztal, Deutschland DA - 2006-03-22 PY - 2006 SN - 3-9810472-0-6 SP - 165 EP - 175 PB - DWS Werbeagentur und Verlag GmbH CY - Pfinztal AN - OPUS4-21345 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Trubiroha, Peter A1 - Wachtendorf, Volker A1 - Geburtig, Anja ED - Ziegahn, K.-F. T1 - Beispiele für die Nutzung des Energietransports durch langwellige (thermische) Strahlung T2 - 35. Jahrestagung der GUS 2006 - Umwelteinflüsse erfassen, simulieren, bewerten CY - Pfinztal, Deutschland DA - 2006-03-22 PY - 2006 SN - 3-9810472-0-6 SP - 205 EP - 214 PB - DWS Werbeagentur und Verlag GmbH CY - Pfinztal AN - OPUS4-21347 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bettge, Dirk T1 - Schadensanalyse/Schadensursachen - Stand und aktuelle Entwicklungen T2 - 8. VDI-Fachtagung Anlagensicherheit CY - Köthen, Germany DA - 2006-11-09 PY - 2006 AN - OPUS4-22914 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klinger, Christian T1 - Schadensanalyse an umgebrochenen Strommasten (Münsterland 2005) T2 - VDI AK Werkstofftechnik und BAM-Kolloquium CY - Berlin, Germany DA - 2006-09-26 PY - 2006 AN - OPUS4-22822 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hennecke, Manfred T1 - The German Federal Research Institutes and their role in policy advice T2 - BBAW (Berlin-Brandenburgische Akademie der Wissenschaften) CY - Berlin, Germany DA - 2006-01-14 PY - 2006 AN - OPUS4-22993 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hennecke, Manfred T1 - Laudatio aus Anlass der Verleihung des Deutschen Gefahrgutpreises an Peter Steinbach T2 - Storck Verlag CY - Hamburg, Germany DA - 2006-02-20 PY - 2006 AN - OPUS4-22994 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hennecke, Manfred T1 - Laudatio aus Anlass der Verleihung der Erich-Siebel-Gedenkmünze an Prof. Dr.-Ing. Christina Berger T2 - Deutscher Verband für Materialforschung und -prüfung CY - Berlin, Germany DA - 2006-05-11 PY - 2006 AN - OPUS4-22995 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hennecke, Manfred T1 - Wissenschaftler in der Ressortforschung T2 - Deutsch-Französische Gesellschaft für Wissenschaft und Technik CY - Berlin, Germany DA - 2006-09-21 PY - 2006 AN - OPUS4-23001 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hasenstab, Andreas A1 - Krause, Martin A1 - Hillemeier, B. A1 - Rieck, C. T1 - Ultraschallecho-Messungen an Holz N2 - In der Praxis kann Fäulnis in Holzkonstruktionen ein großes Problem darstellen. Ein Fäulnisbefall kann zu einer Schädigung in der Gesamtkonstruktion führen. Zusammen mit der TU Berlin wurden an der Bundesanstalt für Materialforschung und -prüfung (BAM) Versuche mit Ultraschallecho zur Detektion von Bauteilrückwänden und verdeckten Hohlstellen durchgeführt. Hierbei werden Sender und Empfänger auf einer Bauteilseite angekoppelt, was eine große Anwendungsvielfalt ermöglicht. Im Rahmen der Versuche an der BAM wurden zylindrische Longitudinalwellenprüfköpfe in Zweikopftechnik mit 100 kHz angeregt und an den Probekörpern mit verschiedenen Koppelmitteln angekoppelt. Die Messergebnisse wurden graphisch als B-Bilder dargestellt und ausgewertet. Dabei zeigte sich, dass die Rückwand der fehlerfreien Probekörper klar geortet wird und eingebrachte Hohlstellen besonders gut detektiert werden können. KW - Zerstörungsfreie Prüfung KW - Ultraschallecho KW - Holz PY - 2006 DO - https://doi.org/10.1007/s00107-006-0124-x SN - 0018-3768 VL - 64 SP - 475 EP - 481 PB - Springer CY - Berlin AN - OPUS4-23056 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hasenstab, Andreas T1 - Testing Of Wooden Construction Elements with Ultrasonic Echo Technique and X-Ray T2 - 9th European Conference on NDT 2006 CY - Berlin, Germany DA - 2006-09-25 PY - 2006 AN - OPUS4-23092 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Auersch, Lutz T1 - Two- and three-dimensional methods for the assessment of ballast mats, ballast plates and other isolators of railway vibration PY - 2006 SN - 1027-5851 VL - 11 IS - 4 SP - 167 EP - 176 CY - St. Petersburg, Russia AN - OPUS4-18953 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kranzmann, Axel A1 - Hünert, Daniela T1 - Technologien für den Klimaschutz und ihre Anforderungen an Werkstoffe N2 - Der Klimaschutz erfordert die Reduzierung des Ausstoßes von Kohlendioxid. Neue Kraftwerke mit Sauerstoffverbrennung und möglicherweise CO2-Abscheidung sollen eine Reduktion des CO2 im Bereich der Energietechnik ermöglichen. Die heute üblichen Hochtemperaturwerkstoffe werden anderen Umgebungsbedingungen ausgesetzt, und es sind andere Korrosionsraten und Korrosionsreaktionen zu erwarten. In diesem Beitrag werden die Kraftwerkstechnologien kurz vorgestellt und an einem Beispiel erläutert, dass die Oxidation an Luft mit der Oxidation in Wasser nicht direkt vergleichbar ist. KW - Klimaschutz KW - CO2-arme Kraftwerke KW - Werkstoffe PY - 2006 DO - https://doi.org/10.1002/cite.200600030 SN - 0009-286X SN - 1522-2640 VL - 78 IS - 12 SP - 1809 EP - 1817 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-19040 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pasternak, H. A1 - Komann, Steffen ED - Gizejowski, ED - Kozlowski, ED - Sleczka, ED - Ziólko, T1 - A new design formula for determining the load-bearing capacity of locally supported shells T2 - XI. Miedzynarodowa Konferencja Naukowo-Techniczna "Konstrukcje Metalowe" CY - Rzeszów, Poland DA - 2006-06-21 KW - Cylindrical shell KW - Stability KW - Steel KW - Buckling KW - Longitudinal stiffeners PY - 2006 SN - 0-415-40120-8 SP - 160 EP - 161 PB - Taylor & Francis CY - London, UK AN - OPUS4-19152 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ivanow, Alexander A1 - Yudina, N. V. A1 - Lomovsky, O. A1 - Mathies, Helena ED - Frimmel, F. ED - Abbt-Braun, G. T1 - Chemical transformations of humic acids of peats of West Siberia under mechanochemical activation T2 - 13th Meeting of the International Humic Substances Society - Humic Substances - Linking Structure to Functions CY - Karlsruhe, Germany DA - 2006-07-30 KW - Humic acids KW - Peat KW - Mechanoactivation KW - Mechanochemical activation PY - 2006 SN - 1612-118X N1 - Serientitel: Schriftenreihe des Lehrstuhls für Wasserchemie und der DVGW-Forschungsstelle am Engler-Bunte-Institut der Universität Karlsruhe (TH) – Series title: Schriftenreihe des Lehrstuhls für Wasserchemie und der DVGW-Forschungsstelle am Engler-Bunte-Institut der Universität Karlsruhe (TH) VL - 45-I SP - 341 EP - 344 PB - DVGW-Forschungsstelle CY - Karlsruhe AN - OPUS4-19098 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pasternak, H. A1 - Komann, Steffen ED - Camotin, D. T1 - A new approach for determining the load-bearing capacity of locally supported shells N2 - In practice usually thin-walled cylindrical silos are supported locally at the bottom rim of the shell. In this area a stress concentration may occur, which is responisble for buckling of the shell. In the currently applied codes, there is no information, how to analyze the load-bearing capacity of theselocally supported shells. In this paper, a new design formula is given for determining the load-bearing capacity. T2 - International Colloquium on Stability and Ductility of Steel Structures CY - Lisbon, Portugal DA - 2006-09-06 KW - Cylindrical shells KW - Stability KW - Steel KW - Buckling KW - Longiudinal stiffeners PY - 2006 SN - 972-846961-6 VL - 2 SP - 595 EP - 602 PB - IST Press CY - Lisabon AN - OPUS4-19153 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Noske, Reinhard T1 - TNT-Chemosensor-Gerät T2 - Sensor2006 CY - Nuremberg, Germany DA - 2006-03-14 PY - 2006 AN - OPUS4-22794 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Binda, L. A1 - Maierhofer, Christiane ED - L. Binda, ED - M. Drdacky, ED - Kasal, B. T1 - Strategies for the assessment of historic masonry structures T2 - NSF/MSMT supported US-Czech project and RILEM Workshop - "In-Situ Evaluation of Historic Wood and Masonry Structures" CY - Prague, Czech Republic DA - 2006-07-10 KW - Non-destructive testing KW - Historic buildings KW - Masonry KW - Structure KW - Moisture KW - Combination of methods KW - Strategies PY - 2006 SN - 978-80-86246-36-9 SP - 86 EP - 104 AN - OPUS4-17889 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - No/Low SAP and alternative engine oil development and testing T2 - Normungstagung des ASTM Committees "Fuel & Lubricants" CY - Orlando, FL, USA DA - 2006-12-03 PY - 2006 AN - OPUS4-18197 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - Validation of oxidative stability of factory fill and alternative engine oils using the Iron Catalysed Oxidation Test T2 - Normungstagung des ASTM Committees "Fuel & Lubricant" CY - Orlando, FL, USA DA - 2006-12-03 PY - 2006 AN - OPUS4-18198 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Balke, Christian A1 - Probst, Ulrich T1 - Test Facilities on the Open-Air Test Site of the Federal Institute for Materials Research and Testing (BAM) T2 - Dimensions. 06, The International Forum on Transport Packaging CY - San Antonio, Texas, USA DA - 2006-04-18 KW - Test Facilities KW - Fire Tests PY - 2006 SP - 1 EP - 7 AN - OPUS4-18430 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weber, Gert T1 - Widerstandspunktschweißen hoch fester Mehrphasenstähle (AHSS) für den Karosserieleichtbau T2 - 30. Fachtagung: "Prozesskette Karosserie" Karosserieleichtbaufertigung im Automobiljahr 2006 plus produktionsoptimierte Fertigungstechniken u -systeme CY - Leipzig, Germany DA - 2006-05-09 PY - 2006 AN - OPUS4-19380 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krebber, Katerina A1 - Henschel, H. A1 - Weinand, U. T1 - Fibre Bragg gratings as high dose radiation sensors? N2 - We have measured for the first time the shift of the Bragg wavelength and other parameters of fibre Bragg gratings (FBGs) exposed to radiation at different wavelengths up to a dose of 100 kGy. The results show that the FBG sensitivity to radiation increases from 820 nm to 1516 nm so that FBGs with higher Bragg wavelength, e.g. 1.55 µm, are good candidates for high dose radiation sensing: no saturation was observed up to 100 kGy and the measured wavelength shift was fairly independent on the radiation dose rate. T2 - 17th International Conference on Optical Fibre Sensors CY - Bruges, Belgium DA - 2005-05-23 KW - Fibre Bragg gratings KW - Radiation effects KW - Gamma radiation KW - Fibre sensors KW - Radiation sensors KW - Radiation dosimetry PY - 2006 DO - https://doi.org/10.1088/0957-0233/17/5/S26 SN - 0957-0233 SN - 1361-6501 VL - 17 SP - 1095 EP - 1102 PB - IOP Publ. Ltd. CY - Bristol AN - OPUS4-7491 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Binder, Christian T1 - Combustion Tests under High Pressure Oxygen: Metals- vs. Component-Related Test Specifications T2 - G04 Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres Eleventh International Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres CY - Washington, D.C., USA DA - 2006-10-18 PY - 2006 AN - OPUS4-7594 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kasch, Thomas T1 - Promoted combustion testing of metals in high pressure oxygen by the federal Institute for materials research and testing (BAM) T2 - G04 Compatibility and sensitivity of materials in oxygen enriched atmospheres eleventh international symposium on flammability and sensitivity of materials in oxygen-enriched atmospheres CY - Washington, D.C., USA DA - 2006-10-18 PY - 2006 AN - OPUS4-7595 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schiller, Wolfgang T1 - Gesetzliche Textilkennzeichung in Deutschland T2 - DTV-Sachverständigenseminar; Forschungsinstitut Hohenstein CY - Bönnigheim, Germany DA - 2006-06-22 PY - 2006 AN - OPUS4-7701 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mitropetros, Constantinos A1 - Hieronymus, Hartmut A1 - Steinbach, J. T1 - Single bubble ignition after shock wave impact KW - Bubble KW - Combustion KW - Diffusion KW - Conduction KW - Detonation KW - Explosion KW - Safety KW - Shock induced PY - 2006 SN - 0009-2509 VL - 61 SP - 397 EP - 416 PB - Elsevier CY - Amsterdam AN - OPUS4-10846 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hertwig, Andreas T1 - Laser Safety: Ablation thresholds of fs-Pulses vs. optical constants evaluated by spectroscopic ellipsometry T2 - 4. Workshop Ellipsometry CY - Berlin, Germany DA - 2006-02-20 PY - 2006 AN - OPUS4-10885 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Biermann, Vera A1 - Simon, Franz-Georg A1 - Csövári, M. A1 - Csicsák, J. A1 - Földing, G. A1 - Simoncsics, G. ED - Merkel, B. ED - Hasche-Berger, A. T1 - Long-term performance of reactive materials in PRBs for uranium remediation N2 - Elemental iron (Fe0) and hydroxyapatite (HAP) were evaluated as reactive materials in PRBs for uranium remediation. Laboratory experiments were carried out and a pilot-scale reactive barrier with Fe0 was installed in Pécs (Southern Hungary). Results of 2.5 years of operation are reported. The PRB has a considerable influence on groundwater composition: uranium concentrations decrease from 900 µg/l to <10 µg/l, TDS drop from 1,000 mg/l to 500 mg/l. T2 - 4. Uranium Mining and Hydrogeology Congress CY - Freiberg, Germany DA - 2005-09-11 KW - PRBs KW - Permeable Reaktive Wände KW - Grundwassersanierung KW - Uran PY - 2006 SN - 3-540-28363-3 DO - https://doi.org/10.1007/3-540-28367-6_28 SP - 275 EP - 285 PB - Springer CY - Berlin AN - OPUS4-10886 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schartel, Bernhard A1 - Bartholmai, Matthias A1 - Braun, Ulrike T1 - Residue, Charring and Intumescence N2 - The exploration of condensed phase mechanisms such as charring and intumescence has been pushed forward in the last decades, since it is believed that focusing on these concepts will bring materials closer to an efficient and ecologically friendly fire retardancy. They promise to concentrate efficient fire retardancy at the key position between pyrolysis zone and gas phase. Examples of residue/char forming and intumescent materials are used to illustrate the influence of mass and heat barrier effects on the fire behavior of materials and general results are presented. A comprehensive understanding of the mechanisms and structure-property relationships in fire retardancy is presented. KW - Fire retardancy KW - Nanocomposites KW - Red Phosphorus KW - Intumescence KW - Cone Calorimeter PY - 2006 SN - 1-59623-221-8 VL - XV SP - 15 EP - 21 PB - BCC Research CY - Norwalk, Conn. AN - OPUS4-4068 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin T1 - Advantage of a combined ultrasonic and eddy current examination for railway inspection trains N2 - Some years ago two railway inspection trains (RIT) already equipped with ultrasound, had additional advanced eddy current techniques installed. Recently a new RIT, was equipped with a system that was designed, from the beginning, to employ a combination of these two techniques for non-destructive rail inspection. The eddy current technique has been developed to enable identification and evaluation of rolling contact fatigue (RCF) defects. The ultrasound technique is aimed at measurements in the rail bulk volume, which are not feasible using the eddy current technique. Experience gained from application has shown that clear improvement on rail inspection can be achieved. For example, following DB AG guideline defects which are classified as group 2 using ultrasound testing can be further labeled as "distinguished positions" if for example head checking can be identified in the same position using the eddy current technique i.e. the new technique is capable of identifying two fundamentally different types of defects occurring at the same location. Such defects can then be then classified as Group 1 equivalent according to the DB AG guideline. Furthermore,- problem cases in the past, such as the decision whether a weld or rail joint is present for a fishing table can be reliably determined using additional information from the eddy current technique. In this presentation examples will be provided to demonstrate application. T2 - ECNDT Berlin 2006, 9. Europäische ZfP-Konferenz CY - Berlin, Germany DA - 2006-09-25 PY - 2006 AN - OPUS4-11839 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -