TY - GEN T1 - Untersuchung der Statistik "Unfälle mit wassergefährdenden Stoffen" des Statistischen Bundesamtes aus dem Jahr 2003 im Vergleich zu den Vorjahren N2 - Die BAM untersucht regelmäßig Statistiken über Unfälle mit wassergefährdenden Stoffen sowie Datenerhebungen zu Gefahrgutunfällen. Ziel ist es, Hinweise zu Tendenzen und Lücken abzuleiten, die möglicherweise Anlass für weitere Aktivitäten und Maßnahmen geben, z. B. im rechtlichen Bereich oder in der Praxis. Regelmäßig beobachtete Unfallstatistiken über Jahre geben einen guten Überblick über das Unfallgeschehen in Deutschland. Dieser Bericht betrachtet das Jahr 2003 im Vergleich zu den Vorjahren. KW - Gefahrgutunfälle KW - Unfallstatistik KW - Wassergefährdende Stoffe PY - 2006 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-355048 SP - 1 EP - 35 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-35504 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Knorr, Annett T1 - Anwendung der TRAS 410 auf die sicherheitstechnische Beurteilung einer Perestersynthese T1 - Application of the technical rule TRAS 410 to the safety evaluation of a peroxide synthesis N2 - Exotherme Reaktionen verursachten in der Vergangenheit im industriellen Maßstab immer wieder Unfälle. Deshalb ist die Kenntnis des Gefahrenpotentials einer chemischen Reaktion sowohl im Normalbetrieb als auch bei Abweichungen davon eine Voraussetzung für eine sichere Prozessführung. Mit der Veröffentlichung der Technischen Regel für Anlagensicherheit (TRAS) 410 "Erkennen und Beherrschen exothermer Reaktionen" im Jahr 2001 existiert für chemische Stoffumwandlungen im Industriemaßstab eine auf dem Stand der Sicherheitstechnik basierende Anleitung zur systematischen Identifizierung von Gefahren, zu deren Bewertung und zur Erstellung von Maßnahmen, um Störfälle zu verhindern. Betrachtet wird dabei vorrangig die thermische Prozess-Sicherheit. Ein erhöhtes Gefahrenpotential besitzen exotherme Reaktionen an denen wie im vorliegenden Fall organische Peroxide beteiligt sind. Diese Verbindungsgruppe ist für ihre thermische Instabilität bekannt. In dieser Arbeit wird die unter basischen Bedingungen, zweistufig ablaufende Umsetzung von tert.-Butylhydroperoxid (TBHP) mit Pivaloylchlorid zum tert.-Butylperoxypivalat (TBPP) untersucht. TBHP, das auftretende Zwischenprodukt und TBPP gehören zur Stoffgruppe der organischen Peroxide. Bei der Bewertung der thermischen Prozess-Sicherheit der TBPP-Synthese wurde entsprechend der TRAS 410 vorgegangen. Die thermische Stabilität der beteiligten Stoffe wurde mit thermoanalytischen Screening-Methoden untersucht und die Reaktion durch kalorimetrische Untersuchungen charakterisiert. Die formale Anwendung der 100 K-Regel zur Festlegung der Grenztemperatur Texo, bei der alle an der Reaktion beteiligten Stoffe unter Verfahrensbedingungen sicher handhabbar sind, beträgt -36 °C. Bei dieser Temperatur ist der Prozess nicht durchführbar, da einzelne Reaktionskomponenten auskristallisieren und die Reaktion nicht wie gewünscht stattfinden kann. Anhand zusätzlicher Untersuchungsergebnisse zur Zersetzungskinetik des Produktes wird erläutert, dass im vorliegenden Fall von der o. g. Regel abgewichen werden kann. Als minimale Prozesstemperatur wurden 0 °C und als maximale Prozesstemperatur 20 °C festgelegt. Der Normalbetrieb wird im Rahmen der festgelegten Verfahrensparameter als sicher bewertet. Die Reaktion läuft dosierkontrolliert ab, eine Akkumulation tritt nicht auf. Aufgrund der geringen Differenz zwischen maximaler Prozesstemperatur und Onset-Temperatur der Zersetzung, besteht bei geringen Abweichungen vom Normalbetrieb die Gefahr, die unkontrollierte Zersetzung des Produktes einzuleiten. Temperaturanstieg und Gasproduktion führen zum Überschreiten der Auslegungsparameter der Anlage. Um die Reaktion durchführen zu können, müssen unbedingt vorbeugende als auch auswirkungsbegrenzende Maßnahmen getroffen werden. Abschließend wird mit Hilfe dimensionsloser Kenngrößen die Maßstabsübertragung mit dem Ziel vorgenommen, Grenzen für Reaktionsvolumina und Dosierzeiten festzulegen. N2 - In the past exothermic reactions in the industrial scale were repeatedly the cause of accidents. Therefore the knowledge of the potential hazards of an exothermic reaction for normal operations as well as for deviations is a precondition for a safe handling of the industrial process. With the release of the technical guide for identification and control of exothermic chemical reactions (“Technische Regel für Anlagensicherheit 410, Erkennen und Beherrschen exothermer chemischer Reaktionen (TRAS 410)“) in Germany 2001 there is a tool available, which is based on the art of safety engineering helps, to identify and to assess hazards and to derive measures to prevent failures. The main focus is pointed to the thermal process safety. A higher potential hazard possess exothermic reactions, in which, like in the present case, organic peroxides are involved. These type of compounds are well known for their thermal instability. In the thesis a two-phase, semi-batch reaction of tert-Butylhydroperoxide (TBHP) with pivaloyl chloride to tert-Butylperoxypivalate (TBPP) was investigated. Both TBHP, the formed intermediate and TBPP belong to the group of peroxide. The technical guide TRAS 410 was applied to assess the thermal process safety of the TBPP synthesis. The thermal stability of the involved substances was examined with screening methods and the reaction itself was characterised by calorimetric measurements. The technical application of the 100-Kelvin rule led to a limit temperature Texo of -36 °C, where a safe handling of all substances is firmed. Practically the process is not realisable at this temperature. Due to additionally studies and the determination of the activation energy and the Arrhenius factor of the decomposition of TBPP the lowest process temperature was set at 0 °C. As maximum temperature 20 °C was fixed. In line with the defined operating conditions the normal mode is assessed to be safe. The reaction is controlled by the feed velocity. No accumulation appeared. Because of a narrow gap between process temperature and the temperature, were the decomposition of TBPP starts considerably, only small deviations of process conditions are permitted. Otherwise the decomposition will run uncontrolled with temperature raise and gas production, definitely resulting in exceeding design limits of the process. To carry out the process several preventive measures like control engineering techniques have to be installed. Finally scale-up using dimensionless parameter is done to determine minimum and maximum reaction volume and feed time. KW - Maßstabsübertragung KW - Peroxidsynthese KW - Reaktionskalorimetrie KW - Semibatch-Reaktion KW - Sicherheit KW - Peroxide synthesis KW - Reaction calorimetry KW - Safety KW - Scale-up KW - Semibatch reaction PY - 2006 UR - https://nbn-resolving.org/urn:nbn:de:kobv:83-opus-11954 DO - https://doi.org/10.14279/depositonce-1279 SP - 1 EP - 162 PB - Technische Universität CY - Berlin AN - OPUS4-35406 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Auersch, Lutz T1 - Praxisgerechtes Prognoseverfahren für Schienenverkehrserschütterungen N2 - Im Forschungsvorhaben „Praxisgerechtes Prognoseverfahren für Schienenverkehrserschütterungen“ wurde ein Prognoseprogramm entwickelt, das die Erschütterungsemission, -transmission und –immission für verschiedene Bahnen, verschiedene Böden, verschiedene Gebäude und verschiedene Minderungsmaßnahmen prognostizieren und bewerten kann. Es ist gelungen, ein Prognoseverfahren zusammenzustellen, das sowohl wissenschaftlich fundiert als auch einfach handhabbar ist. Die besonderen Merkmale des Prognoseverfahrens sind folgende: - Das Prognoseprogramm basiert auf physikalischen Modellen. - Das Programm besitzt klar definierten Schnittstellen zwischen der Emission und der Transmission und zwischen der Transmission und der Immission. Im ersten Fall sind es die auf den Untergrund wirkenden Erregerkräfte von Fahrzeug und Fahrweg, im zweiten Fall sind es die Freifeldamplituden des Bodens. - Das Prognoseprogramm erlaubt es, Messdaten einzulesen und in physikalisch sinnvoller Weise weiter zu verarbeiten. Damit sind die gesetzten Ziele für das Prognoseverfahren erfüllt und mit der Implementierung in einem benutzerorientierten Programm übertroffen worden. Es ist gelungen, ausgehend von komplexen Modellen einfache Modelle zu finden und anzupassen. Hier ist einerseits die vereinfachte Berechnung der Wellenausbreitung im Boden zu nennen, die sowohl für kontinuierlich steifer werdende Böden als auch für geschichtete Böden zutreffende Ergebnisse liefert. Andererseits war die vereinfachte Berechnung der Fahrweg-Boden-Wechselwirkung ein besonderer Erfolg, da sowohl Standardgleise als auch Bundesanstalt für Materialforschung und –prüfung (BAM) Seite 24 Praxisgerechtes Prognoseverfahren für Schienenverkehrserschütterungen Gleise mit Minderungsmaßnahmen (zum Beispiel mit Unterschottermatten) durch allgemeine Gesetzmäßigkeiten erfasst werden konnten. KW - Erschütterungen KW - Schienenverkehr KW - Prognoseprogramm KW - Theoretische Modelle KW - Messtechnische Ergebnisse KW - Verifikation PY - 2006 UR - https://www.tib.eu/de/suchen/id/TIBKAT:521052653/Praxisgerechtes-Prognoseverfahren-f%C3%BCr-Schienenverkehrsersch%C3%BCtterungen?cHash=ae6365e413192da1dcf4ceeefa43e426 SP - 1 EP - 36 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-55247 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Beckmann, Jörg A1 - Redmer, Birgit A1 - Finn, Monika A1 - Glaubitz, Steffen T1 - Bestimmung der elastischen Eigenschaften von Festkörpern - Teil 1 N2 - ür die Berücksichtigung mechanischer Belastungen unterhalb der Streckgrenze ist im Rahmen einer zuverlässigen Bauteilauslegung die Kenntnis der elastischen Konstanten von besonderer Bedeutung. Für die experimentelle Bestimmung des Elastizitätsmoduls wurde eine Vielzahl von Verfahren entwickelt, die zum Teil werkstoffspezifisch Eingang in die Normung gefunden haben. Prinzipiell können diese Verfahren in zwei Gruppen unterteilt werden: die statischen und die dynamischen Prüfverfahren. Die statischen Verfahren beruhen auf der direkten Messung des Spannungs-Dehnungs-Zusammenhangs während einer mechanischen Belastung im elastischen Verformungsbereich (Zug, Biegung, Druck). Die dynamischen Verfahren basieren auf der Schwingungsanregung eines Prüfkörpers und der Analyse der resultierenden Schwingungen (Resonanzmethode oder Impulsanregungsmethode) oder auf der Messung der Ultraschallausbreitungsgeschwindigkeit. Stellvertretend für die dynamischen Verfahren wird im ersten Teil dieses Beitrages die Resonanzmethode vorgestellt. Der zweite Teil dieses Beitrages fasst die werkstoffabhängigen Ergebnisse der E-Modulbestimmung mit statischen Verfahren im Zug- und Biegeversuch zusammen. KW - Modul KW - Resonanzmessung PY - 2006 DO - https://doi.org/10.1515/mt-2006-0003 SN - 0025-5300 VL - 48 IS - 6 SP - 274 EP - 281 PB - De Gruyter CY - Berlin AN - OPUS4-54602 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nolze, Gert T1 - Interphase boundary characterization in duplex steel and iron meteorites using EBSD technique N2 - The properties of materials are mainly described by the orientation distribution of the crystalline phases in a material. Beside the so considered anisotropy also the grain as well as phase boundaries are of extreme importance for a whole string of properties, e.g. the strength of a material. On the example of the interface between fcc and bcc iron the discovered and derived models are discussed. Although the common models are based on the crystal lattice description, the atomic configuration on the interface is analysed. Since experimentally a wide spread of orientations data appears the consideration of the frequency distribution is proposed to find at least the main orientation relationship between fcc and bcc. High-indexed pole figures as well as the Euler subspace are introduced in order to increase the accuracy and to compare different measurements. For the sake of simplicity EBSD measurements on iron meteorites are used since they commonly consist of large fcc single crystals which transformed to a low and very specific number of bcc grains. In special cases the described procedure could also be used for steels. KW - Orientation relationships KW - Electron backscatter diffraction KW - Steel KW - Iron meteorites KW - Kurdjumov-Sachs KW - Nishiyama-Wassermann PY - 2006 SN - 1733-3490 SN - 0004-0770 SN - 0860-7052 VL - 51 IS - 1 SP - 15 EP - 22 AN - OPUS4-38030 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Glowacka, A. A1 - Wozniak, M. J. A1 - Nolze, Gert A1 - Swiatnicki, W. A. T1 - Hydrogen induced phase transformations in austenitic-ferritic steel N2 - The hydrogen influence on the microstructure of the austenitic-ferritic Cr22-Ni5-Mo3 stainless steel was investigated. Cathodic hydrogen charging was performed electrochemically from aqueous solution of 0.1M H2SO4 with hydrogen entry promoter addition. The aim of this study was to reveal microstructural changes appearing during the hydrogen charging and particularly to clarify the occurrence of phase transformations induced by hydrogen. The specific changes in both phases of steel were observed. In the ferritic phase, strong increase of dislocation density was noticed. Longer time of hydrogen charging leaded also to the strips and twin plates formation in ferrite phase. In the austenitic phase, the generation of stacking faults, followed by the formation of α' martensite was remarked. KW - Steel KW - Hydrogen KW - Embrittlement KW - Electron backscatter diffraction KW - SEM PY - 2006 DO - https://doi.org/10.4028/www.scientific.net/SSP.112.133 SN - 1662-9779 VL - 112 SP - 133 EP - 140 AN - OPUS4-38031 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wendt, U. A1 - Nolze, Gert A1 - Heyse, H. T1 - Effect of crystal orientation on imaging contrast and sputter results during focused ion beam milling of Cu studied by FIB, EBSD, SEM, and AFM N2 - During focused ion beam microscopy (FIB) of crystalline materials imaging contrast and milling result are effected by orientation of the crystals with respect to the incident ion beam. This is due to the possibility of ion channeling along preferred crystal directions which effects the depth at which interaction between ions and specimen atoms takes place. As a result of channeling emission of ion induced secondary electrons (iiSE) and secondary ions (SI) as well as the sputter rate decreases. Theoretical channeling orientations and critical angles can be calculated. These effects have been studied quantitatively for polycrystalline recrystallized Cu as a typical model case. KW - Electron backscatter diffraction KW - FIB KW - AFM KW - Crystal orientation PY - 2006 DO - https://doi.org/10.1017/S1431927606061812 SN - 1431-9276 SN - 1435-8115 VL - 12 IS - Suppl. 2 SP - 1302 EP - 1303 AN - OPUS4-38027 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Epishin, A. I. A1 - Nolze, Gert T1 - Investigation of the competitive grain growth during solidification of single crystals of nickel-based superalloys N2 - The competitive growth of columnar grains in a single-grain selector, which is used for directional solidification of single-crystal blades from nickel-based superalloys, has been investigated by electron backscattered diffraction and local X-ray diffraction analysis. It has been found that the competitive grain growth in a starter block is determined by the crystallographic factor: rapidly growing grains with the axial orientation close to the [001] direction dominate in this part of the casting. For the competitive grain growth in a helicoidal separator, the geometric factor (the position of a grain at the input of the separator) is also important. The results obtained suggest that an appropriate geometry of the single-grain selector was chosen. In addition, the distribution of the orientations of columnar grains obtained by electron backscattered diffraction, can be used for approximate estimation of the yield of suitable (i.e., with the deviation of the axial orientation from the [001] direction within a specified tolerance) single-crystal blades. KW - Electron backscatter diffraction KW - Single crystal KW - Growth competition KW - Nickel alloy PY - 2006 DO - https://doi.org/10.1134/S1063774506040298 SN - 1063-7745 SN - 1562-689X VL - 51 IS - 4 SP - 710 EP - 714 AN - OPUS4-38028 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Glowacka, A. A1 - Nolze, Gert A1 - Swiatnicki, W. A. T1 - EBSD study of corrosion fatigue of austenitic-ferritic steel N2 - Fatigue crack propagation investigations have been performed in austenitic-ferritic duplex stainless steel H22N5M3 in air and during hydrogen charging, using various frequencies of loading. Strong differences of crack propagation velocity depending on the test conditions were noticed. Lower frequency with applied hydrogen charging led to the huge increase of crack propagation velocity compared to the tests performed in air. To understand such a behaviour in each case and characterize crack mode, the samples were observed using electron back-scattered diffraction (EBSD). It was shown that in air, the fatigue crack propagation involved plastic deformation and the resulting cracks had ductile character. The presence of hydrogen led to more brittle mode of cracking. This effect was also connected with frequency of loading: lower frequency, which assured longer time for hydrogen-crack tip interaction, resulted in the highest crack propagation velocity and the brittle cracking mode with lower amount of plastic deformation. The performed observations indicated that the path of the crack went mostly transgranularly through both austenite and ferrite phases. Phase and grain boundaries were not the preferred paths for crack propagation. KW - Hydrogen KW - Embrittlement KW - Electron backscatter diffraction KW - Steel PY - 2006 SN - 1733-3490 SN - 0004-0770 SN - 0860-7052 VL - 51 IS - 1 SP - 7 EP - 10 AN - OPUS4-38029 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Matthias A1 - Rübner, Katrin A1 - Burkert, Andreas T1 - Einsatz der Quecksilberporosimetrie zur Charakterisierung von Feinkornbetonen für elektrochemische Untersuchungen N2 - Im Rahmen eines DFG-Forschungsvorhabens (FOR 537) wird ein Teilprojekt an der BAM bearbeitet. Ziel dieser Arbeit ist die quantitative Beschreibung und Bewertung des Korrosionsfortschrittes an Stahlproben mit kleinen Kathodenflächen (Eigenkorrosion) mittels elektrochemischer Messungen. Für die Untersuchungen wurden Betonproben mit eingebetteten Stahlelektroden hergestellt. Dabei wurden gezielt betontechnologische Parameter variiert. Dabei ist der Beton als Elektrolyt zu betrachten. Nach bestimmten Zeitintervallen werden die Betonproben aufgebrochen und die eingebetteten Stahlelektroden durch visuelle Inspektion und anschließende Bestimmung des Masseverlustes bewertet. Zur Charakterisierung des Betons (Elektrolyt) dient das Verfahren der Quecksilberporosimetrie. Mit dem Verfahren lassen sich die Zusammenhänge zwischen den betontechnologischen Parametern und der Porenstruktur aufzeigen und mittels der umfangreichen Variation der Betonparameter die Auswirkung auf den Korrosionsfortschritt nachweisen. T2 - XIII. Workshop über die Charakterisierung von feinteiligen und porösen Festkörpern CY - Bad Soden, Germany DA - 14.11.2006 PY - 2006 AN - OPUS4-14294 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rübner, Katrin T1 - Use of recycling materials for concretes T2 - NANOCEM Conference 2006 CY - Copenhagen, Denmark DA - 2006-04-25 PY - 2006 AN - OPUS4-12370 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - EN 1504-1 - 10 Products and systems for the protection and repair of concrete structures T2 - MICROCON- Kolloquium CY - Berlin, Germany DA - 2006-11-29 PY - 2006 AN - OPUS4-14525 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Christoph T1 - Bildgebende Analyse von offenporigen Asphalten Zwischenbericht über den Beitrag der BAM zum BMWI-Verbundvorhaben "LeiStra 2" T2 - Halbzeit-Kolloquium der Verbundvorhaben "Leiser Straßenverkehr - Teil 2" in der BASt CY - Bergisch Gladbach, Germany DA - 2006-11-21 PY - 2006 AN - OPUS4-14130 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Frank A1 - Müller, Urs T1 - Baustoffliche Untersuchungen am Tuffstein des Charlottenburger Tors T2 - ARKUS-Tagung "Denkmalgestein Tuff" CY - Koblenz, Deutschland DA - 2006-05-10 KW - Denkmalpflege KW - Tuff KW - Schadensanalyse KW - Innovative Prüftechnik PY - 2006 IS - IFS-Bericht Nr. 22 SP - 59 EP - 64 PB - IFS CY - Mainz AN - OPUS4-14400 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Urs T1 - The long term effects of a water repellent treatment on a volcanic tuff T2 - Heritage, Weathering and Conservation (HWC-2006) CY - Madrid, Spain DA - 2006-06-21 PY - 2006 AN - OPUS4-11309 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wäsche, Rolf A1 - Yarim, Rasim A1 - Klaffke, Dieter A1 - Hartelt, Manfred T1 - Oscillating sliding wear behaviour of SiC, TiC, TiB2, 59SiC-41TiB2 and 52SiC-24TiC-24TiB2 materials up to 750°C in air N2 - The tribological behaviour of different monolithic and composite ceramics was evaluated in the temperature range between room temperature and 750°C. The test method was oscillating sliding with a ball-on-disk arrangement in an SRV machine. Alumina balls were used as counter body. The friction behaviour was determined on-line, and the wear behaviour was determined from calculations on the basis of wear scar dimensions and profilometric measurements. The friction depends on temperature and shows an increase for most materials for increasing temperature; the smallest friction at all temperatures is found for monolithic TiC. The wear behaviour shows different trends for the different materials. In tests against SiC a maximum of wear is found at 500°C, for TiC at 200°C and for TiB2 at 750°C. The composite ceramics suffer the smallest wear of all materials in the range from 200°C to 500°C. PY - 2006 DO - https://doi.org/10.1002/tt.8 SN - 1354-4063 SN - 1557-685X VL - 12 SP - 99 EP - 111 PB - Coppin CY - Deal AN - OPUS4-32977 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wäsche, Rolf A1 - Gräber, H.-G. A1 - Klaffke, Dieter T1 - Experimentelle Untersuchungen zum Abriebverhalten von keramischen Werkstoffen für dentale Restaurationen T2 - 47. Tribologie-Fachtagung - Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen CY - Göttingen, Germany DA - 2006-09-25 KW - Dentalkeramik KW - Bearbeitbarkeit KW - Abriebverhalten PY - 2006 SN - 3-00-019670-6 VL - I SP - 36/1 EP - 36/9 CY - Aachen AN - OPUS4-31751 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rolle, Annette T1 - Type testing of diveices with inserted radioactive sources T2 - IRPA 2006, Second European International radiation Protection Association Congress CY - Paris, Frankreich DA - 2006-05-15 PY - 2006 AN - OPUS4-32253 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Criqui, B. A1 - Linneman, T. A1 - Desplanches, G. A1 - Woydt, Mathias ED - Bartz, Wilfried J. T1 - Tribological performances of new triboactive (Ti,Mo)(C,N) and Tin-2Cr2O2n-1 as piston ring and cylinder liner coatings interacting with bio-no-tox lubricants T2 - 15th International colloquium tribology - Automotive and Industrial Lubrication CY - Ostfildern, Germany DA - 2006-01-17 KW - Thermisches Spritzen KW - Triboactif KW - Beschichtungen KW - APS KW - HVOF KW - (Ti,Mo)(C,N) KW - Tin-2Cr2O2n-1 KW - Bio-no-tox-Öle KW - PAG KW - Ester PY - 2006 SN - 3-924813-62-0 SP - Paper 15_P4_Woydt_Plenar, 1 EP - 10 CY - Ostfildern AN - OPUS4-31742 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Santner, Erich A1 - Klaffke, Dieter A1 - Meine, Kerstin A1 - Polaczyk, Christoph A1 - Spaltmann, Dirk T1 - Demonstration of topography modification by friction processes and vice versa N2 - Contact formation and development are the basis of friction and wear modelling and understanding. Unanimously topography formation and development in friction contacts are regarded of highest importance for understanding and modelling friction processes. The frequently found running in behaviour of sliding contacts is—aside from the build up of reaction and transfer layers-at least partly caused by the topography development due to friction processes until a stable equilibrium state is reached. Experimental results of friction and topography measurements are presented which demonstrate the mutual modification of friction and contact topography. A special experimental set up with an AFM allowed to correlate the measured friction forces with the contact position and the topography at this point. In this way, friction force transitions and changes can be assigned to topography changes due to abrasion, adhesion and wear particle agglomeration. Contact surfaces with artificial regular structures have been prepared to avoid problems with topography and friction correlation due to the statistical nature of roughness on technical contact surfaces. The friction effects of roughness were simulated by etched ditches of defined width, depth and distance on silicon or metal surfaces. This allowed to explain the mutual influences of topography and friction. The effect of a single ‘asperity’ and of the 'roughness structures' could be demonstrated. Topography measurements with an AFM correlated with the friction force could help to understand friction changes without changing any parameter. KW - Friction KW - Roughness KW - Topography KW - Adhesion KW - Wear PY - 2006 DO - https://doi.org/10.1016/j.triboint.2005.04.029 SN - 0301-679X VL - 39 SP - 450 EP - 455 PB - Butterworth-Heinemann CY - Oxford AN - OPUS4-31744 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -