TY - CONF A1 - Mietz, Jürgen T1 - Aktuelle Probleme bei bestimmten vergüteten Spannstählen T2 - Fachtagung "Sonderkapitel aus dem Brücken- und Ingenieurbau" CY - Berlin, Deutschland DA - 2000-11-13 PY - 2000 SP - 87 EP - 99 PB - BAM CY - Berlin AN - OPUS4-981 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dähne, Siegfried A1 - v.Berlepsch, H. A1 - Böttcher, C. A1 - Quart, A. A1 - Burger, C. A1 - Kirstein, S. T1 - Supramolecular Structures of J-Aggregates of Carbocyanine Dyes in Solution N2 - Light- and small-angle neutron scattering as well as cryo-transmission electron microscopy (cryo-TEM) studies were performed to probe the structure of J-aggregates formed by a series of achiral dye molecules of the 5,5',6,6'-tetrachlorobenzimidacarbocyanine chromophore having 1,1'-dialkyl substituents combined with 3,3'-bis(4-sulfobutyl)-3,3'-bis(4-carboxybutyl) or 3,3'-bis(3-carboxypropyl) substituents. Assemblies that display a dependence on the substituents different complex supramolecular structures of nanometer-to-micrometer size have been directly visualized by cryo-TEM. The superstructures span from monomolecular layers formed by the 1,1'-diethyl-3,3'-bis(4-sulfobutyl) derivative and stacks of bilayer ribbons in the case of the 1,1'-dioctyl-3,3'-bis(4-carboxybutyl) derivative to twisted ropelike structures for the chiral aggregate of the 1,1'-dioctyl-3,3'-bis(3-carboxypropyl)-substituted chromophore. PY - 2000 DO - https://doi.org/10.1021/jp000220z SN - 1520-6106 SN - 1520-5207 SN - 1089-5647 VL - 104 IS - 22 SP - 5255 EP - 5262 PB - Soc. CY - Washington, DC AN - OPUS4-862 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dähne, Siegfried A1 - v.Berlepsch, H. A1 - Böttcher, C. A1 - Quart, A. A1 - Regenbrecht, M. A1 - Akari, S. A1 - Keiderling, U. A1 - Schnablegger, H. A1 - Kirstein, S. T1 - Surfactant-induced changes of morphology of J-aggregates: Superhelix-to-tubule transformation N2 - The morphology of the J-aggregates formed after the addition of ionic surfactants into solutions of the 3,3'-bis(3-carboxypropyl)-5,5',6,6'-tetrachloro-1,1'-dioctylbenzimidacarbocyanine dye (C8O3) was characterized by absorption and circular dichroism spectroscopy, cryogenic temperature transmission electron microscopy, scanning force microscopy, and small-angle neutron scattering. The optical activity of the C8O3 J-aggregates, existing in aqueous solution as superhelices composed of tubular single strands, disappears upon addition of both cationic and anionic surfactants. This is accompanied by distinct spectral changes in the visible region as well as changes of the aggregates' morphology. The anionic surfactant sodium dodecyl sulfate induces the formation of single-walled tubules of 15 nm diameter and 300-600 nm length, which completely transform after several days into thick multilamellar tubes of micrometer length. The cationic surfactant trimethyltetradecylammonium bromide first produces vesicles that later transform again into tubular aggregates of nanometer thickness and micrometer length. PY - 2000 DO - https://doi.org/10.1021/la000014i SN - 0743-7463 SN - 1520-5827 VL - 16 IS - 14 SP - 5908 EP - 5916 PB - American Chemical Society CY - Washington, DC AN - OPUS4-863 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Spitz, Christian A1 - Dähne, Siegfried A1 - Quart, A. A1 - Abraham, H.-W. T1 - Proof of chirality of J-Aggregates spontaneously and enantioselectively generated from achiral dyes N2 - The recently published claim1,2 that the achiral 5,5',6,6'- tetrachlorobenzimidacarbocyanine chromophore spontaneously and enantioselectively generates chiral J-aggregates when it is substituted in the 1,1'-position with n-alkyl groups longer than hexyl and in the 3,3'-position with -acido-ethyl or -acido-n-propyl groups has been proved by embedding the J-aggregates of such a dye (1a) in a polymeric PVA film and measuring the CD signal at defined observation angles. Dye 1b, which is assumed to give achiral J-aggregates, has been investigated for comparison as well. Possible contibutions of linear dichroism and birefringence of ordered molecules to the measured CD signal have been excluded by careful checks using both a plain PVA film and a film containing monomers of a dye (2) of known chirality. PY - 2000 DO - https://doi.org/10.1021/jp001805w SN - 1520-6106 SN - 1520-5207 SN - 1089-5647 VL - 104 IS - 36 SP - 8664 EP - 8669 PB - Soc. CY - Washington, DC AN - OPUS4-864 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reck, Günter A1 - Dähne, Siegfried A1 - Kirstein, S. A1 - v. Berlepsch, H. A1 - Böttcher, C. A1 - Burger, C. A1 - Ouart, A. T1 - Chiral J-aggregates formed by achiral cyanine dyes PY - 2000 UR - http://www3.interscience.wiley.com/cgi-bin/abstract/74500665/ABSTRACT DO - https://doi.org/10.1002/1439-7641(20001103)1:3<146::AID-CPHC146>3.0.CO;2-Y SN - 1439-4235 SN - 1439-7641 VL - 1 IS - 3 SP - 146 EP - 150 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-865 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schors, Jörg A1 - Harbich, Karl-Wolfram A1 - Hentschel, Manfred P. T1 - Röntgen-Refraktions-Topographie von Hochleistungs-Werkstoffen N2 - Für die zerstörungsfreie Charakterisierung nichtmetallischer Werkstoffe hat sich das Verfahren der Röntgen-Refraktions-Topographie bewährt. Es handelt sich phänomenologisch um eine Technik der Röntgen-Kleinwinkel-Streuung mit Probekörper-Abtastung bei fest vorgewähltem Streuwinkel. Durch röntgenoptische Brechungseffekte sind innere Ober- und Grenzflächen, insbesondere Mikrorisse, auch unterhalb der licht-mikroskopischen Erkennbarkeitsgrenze, detektierbar. Die Höhe des Streusignals ist dabei proportional zur Gesamt-Grenzfläche im Streuvolumen. So werden z.B. gleichzeitig zahlreiche Risse quanmtitativ detektierbar, ohne daß sie einzeln auf der Ortsskala separiert sind. Da es sich hierbei um eine Durchstrahlungs-Technik handelt, überlagern die Strukturen zu einer Projektion, die - analog zu den radiographischen Verfahren - über die Wanddicke gemittelte innere Oberflächen abbildet. Am Beispiel typischer Hochleistungswerkstoffe, wie SiC-Keramik und C-Faser Komposite (CFK) wird der Informationsgehalt der Röntgen-Refraktions-Topogramme diskutiert. Die Ergebnisse der Keramik-Untersuchung zeigen die unterschiedliche Porengrößenverteilung verschiedener Sinterstufen sowohl ortsaufgelöst als auch statistisch. Die Topogramme der CFK-Probekörper zeigen eine inhomogene Ortsverteilung der Rißdichte nach unterschiedlichen dynamischen Belastungen. Es ergibt sich eine hervorragende Korrelation der Rißdichte mit der Restfestigkeit. Die dargestellten Ergebnisse visualisieren die Anordnung von Grenzflächen und inneren Oberflächen, die sich für zahlreiche Hochleistungs-Werkstoffe, vor allem im Transportmittel-Leichtbau, als relevante Mikrostrukturen für das Versagens-Verhalten und die Werkstoff-Optimierung erweisen. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 KW - Röntgen-Refraktions-Topographie KW - Hochleistungswerkstoffe PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/92.htm SN - 3-931381-32-3 VL - 73-1 IS - 2 SP - 1 EP - 11 PB - DGZfP CY - Berlin AN - OPUS4-866 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hundt, Michael T1 - Wege zur Nutzung von Informationsdatenbanken KW - Informationsdatenbanken PY - 2000 SN - 3-87155-780-3 SN - 0935-0292 VL - 15.2001 SP - 286 EP - 295 PB - Verl. für Schweißen u. Verwandte Verfahren DVS-Verl. CY - Düsseldorf AN - OPUS4-867 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Jaenisch, Gerd-Rüdiger A1 - Artemiev, Valentin M. A1 - Naumov, A. T1 - Dynamic image reconstruction - General estimation principle for process tomography T2 - 15th World Conference on Non-Destructive Testing (WCNDT) CY - Roma, Italy DA - 2000-10-15 KW - Dynamic image KW - Stochastic estimation KW - Dynamic reconstruction KW - Kalman filter PY - 2000 UR - http://www.ndt.net/article/wcndt00/papers/idn326/idn326.htm SN - 1435-4934 N1 - Geburtsname von Jaenisch, Gerd-Rüdiger: Tillack, G.-R. - Birth name of Jaenisch, Gerd-Rüdiger: Tillack, G.-R. VL - 5 IS - 11 SP - 1 EP - 8(?) PB - NDT.net CY - Kirchwald AN - OPUS4-868 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Knabe, C. A1 - Howlett, C. A1 - Markovic, B. A1 - Klar, F. A1 - Zreiqat, H. T1 - The Effect of Different Dental Titanium and Calcium Phosphate Implant Surfaces on the Expression of Bone-Related Genes and Proteins in vitro T2 - 6th World Biomaterials Congress CY - Kamuela, Big Island, HI, USA DA - 2000-05-15 KW - Dental Implant Surfaces PY - 2000 VL - 1 SP - 238 PB - Society for Biomaterials CY - Minneapolis, Minn. AN - OPUS4-869 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Knabe, C. A1 - Howlett, C. A1 - Markovic, B. A1 - Reif, D. A1 - Zreiqat, H. T1 - The Functional Expression of Human Bone Derived Cells Grown on Rapidly Resorbable Calcium Phosphate Ceramics T2 - 6th World Biomaterials Congress CY - Kamuela, Big Island, HI, USA DA - 2000-05-15 KW - Calcium Phosphate Ceramics PY - 2000 SP - 970 PB - Society for Biomaterials CY - Minneapolis, Minn. AN - OPUS4-870 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Geißler, Heinz A1 - Geotti-Bianchini, F. A1 - Preo, M. A1 - Smith, I. A1 - v. Nijnatten, P. A1 - Bucher, G. T1 - Intercomparison of IR transmittance measurements on water-containing glasses KW - Gases in Glass KW - IR PY - 2000 SN - 0946-7475 VL - 73 IS - 10 SP - 309 EP - 318 PB - Verl. d. Dt. Glastechn. Ges. CY - Offenbach AN - OPUS4-882 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Balke, Christian A1 - Ludwig, Jörg T1 - Brandversuch mit einem Eisenbahnkesselwagen N2 - Im Rahmen eines Versuchs sollten die Versagensgrenzen eines mit Fluessiggas gefuellten Eisenbahnkesselwagens bei Unterfeuerung ermittelt werden. Untersucht wurden die Auswirkungen eines Unfallfeuers auf einen mit Fluessiggas teilgefuellten Waggon sowie die Konsequenzen, die sich hieraus im Falle eines brandbedingten Berstens hinsichtlich Truemmerflug sowie Druck- und Temperaturbelastung fuer die Umgebung ergeben. Beschrieben werden der Versuchsaufbau, die Versuchsdurchfuehrung sowie wesentliche Ergebnisse und Konsequenzen aus dem Versuch. Unter anderem wird festgehalten, dass durch das Zerbersten des Behaelters mit schlagartiger Verdampfung und anschliessender Zuendung des Fluessiggases Auswirkungen hervorgerufen werden koennen, die im Brandfall in relativ kurzer Zeit eine ernsthafte Gefahr entstehen lassen, und denen durch geeignete sicherheitstechnische Massnahmen begegnet werden sollte. KW - EKW KW - Eisenbahnkesselwagen KW - Flüssiggase PY - 2000 SN - 1434-9728 SN - 1436-4948 SN - 0372-2457 SN - 0376-1185 VL - 41 IS - 9 SP - 54 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-883 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kautek, Wolfgang A1 - Li, G. A1 - Koßmehl, G. A1 - Hunnius, W. A1 - Zhu, H. A1 - Plieth, W. A1 - Melsheimer, J. A1 - Doblhofer, K. T1 - Relative groups on polymer coated electrodes - 10. Electrogenerated conducting polyalkylthiophenes bearing activated ester groups N2 - Three new thiophene derivatives containing different activated ester groups covalently attached to the thiophene ring via a linear undecyl spacer have been synthesized. Electropolymerization of these monomers in acetonitrile led to stable electroactive polymers, while activated functional groups withstand the polymerization conditions and were correctly incorporated in the resulting polymers. These polymers show the characteristic electrochemical behavior of poly(3-alkylthiophene)s with the reversible redox transition in the range of 0.7–0.9 V. UV/Vis spectra of them exhibit an absorption maximum at around 460 nm. Conductivity measurements on oxidized films of these polymers by means of the two-probe method gave values in the range of 10-3–10-2 S cm-1. The reactivity of the pendant activated ester groups was demonstrated by the reaction with butylamine, (4-amino-2-oxabutyl) ferrocene and 2-aminoanthraquinone. Spectroscopic studies and electrochemical characterization confirmed that the immobilized amino compounds are covalently bound to the polymer surfaces. These results suggest that the obtained new polymers can be used as electrically conducting carrier materials for the immobilization of biochemically interesting molecules. KW - Conducting polyalkylthiophene KW - Electropolymerization KW - Activated ester PY - 2000 DO - https://doi.org/10.1016/S0032-3861(99)00201-3 SN - 0032-3861 SN - 1873-2291 VL - 41 IS - 2 SP - 423 EP - 432 PB - Springer CY - Berlin AN - OPUS4-884 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kohlhoff, Harald A1 - Knapp, Jürgen ED - Bonfig, K. T1 - Vollständig nichtmetallischer 3-Achsen Positioniertisch für EMV-Prüfungen T2 - 8. Symposium über Sensoren, Aufnehmer und Systeme CY - Esslingen, Deutschland DA - 2000-05-16 KW - EMV-Prüfung PY - 2000 SN - 3-933609-05-4 N1 - Serientitel: Messen, prüfen, automatisieren – Series title: Messen, prüfen, automatisieren IS - 3 SP - 1(?) EP - 8(?) PB - B-Quadrat Verl. CY - Kaufering AN - OPUS4-888 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geißler, Heinz A1 - Peuker, Christel A1 - Brzezinka, Klaus-Werner A1 - Kohl, Anka A1 - Pilz, Walter T1 - OH- und H2O-Schwingungsbanden in den IR- und Raman-Spektren von Gläsern T2 - 74. Glastechnische Tagung CY - Ulm, Deutschland DA - 2000-05-29 KW - Raman-Spektren KW - IR-Spektren PY - 2000 SP - 164 EP - 167 PB - DGG, Dt. Glastechn. Ges. CY - Frankfurt/M. AN - OPUS4-889 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schröder, Hartmut A1 - Bahr, Horst A1 - Kneip, Gisela A1 - Lorenz, Edelgard A1 - Kunze, Ines A1 - Seifert, Ingetraut T1 - Long-Term-Resistance of PET-Geofibers to Inner and Outer Hydrolysis T2 - Zhongguo Guoji Fei-Zhizaobu/Chanye-Yong Fangzhipin Yantaohui ; China International Nonwovens/Techtextiles Conference CY - Beijing, China DA - 2000-05-23 KW - Hydrolysis KW - PET-Geofibers PY - 2000 N1 - Geburtsname von Kunze, Ines: Schmücking, I. - Birth name of Kunze, Ines: Schmücking, I. SP - 1(?) EP - 17(?) CY - Beijing AN - OPUS4-890 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mair, Georg W. T1 - Optimierung von Gefahrgutumschließungen nach dem Kriterium der ausfallsicherheit am Beispiel faserteilarmierter Treibgasgefäße KW - Gefahrgutumschließungen PY - 2000 SN - 1434-9728 SN - 1436-4948 SN - 0372-2457 SN - 0376-1185 VL - 41 IS - 9 SP - 48 EP - 53 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-872 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - Interphase Characterization via the Stiffness Contrast of a Scanning Force Microscope in Displacement Modulation Mode N2 - The physical properties as well as the thickness of the interphase between polymer and reinforcing phase are generally expected to show a strong influence on the macroscopic mechanical properties of composite materials. In this study the scanning force microscope (SFM) has been applied for detecting stiffness gradients near the interface between copper and epoxide. In displacement modulation mode the load exerted by the tip is modulated sinusoidally by vibrating the normal position of the cantilever or the sample. The corresponding amplitude of dynamic cantilever bending is related to local surface stiffness. Thus, using the SFM, the local mechanical properties of the surface under investigation can be probed. When scanning the tip across the reinforcement/polymer interface, the polymeric interphasial zone can be identified with the observed stiffness gradient. For a commercial epoxide based on diglycidyl ether of bisphenol A (DGEBA) cured with an amine-containing hardener, a stiffness gradient was detected that could be fitted by a Gaussian profile typical for diffusional processes. The width of the stiffness gradient was 280 nm. The observation is discussed in terms of interface-induced segregation processes between resin and hardener, as well as heat conduction mechanisms that can occur during the exothermic curing reaction. Both mechanisms are diffusional in nature and, via the local network structure, are expected to show some influence on the local stiffness of the cured epoxy. Copyright © 2000 John Wiley & Sons, Ltd. T2 - ECASIA 99 CY - Sevilla, Spain DA - 1999-10-04 KW - Scanning Force Microscopy KW - Surface properties KW - Nanomechanics KW - Interface/Interphase KW - Polymer-matrix composites (PMCs) KW - Adherends PY - 2000 DO - https://doi.org/10.1002/1096-9918(200008)30:1<410::AID-SIA846>3.0.CO;2-G SN - 0142-2421 SN - 1096-9918 VL - 30 IS - 1 SP - 410 EP - 414 PB - Wiley CY - Chichester AN - OPUS4-873 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günther, Bernd A1 - Czepluch, Wolf A1 - Mäder, Klaus A1 - Zedler, Steffen T1 - Multiplexer for Attenuation Measurements during POF Durability Testing T2 - International POF Technical Conference 2000 (POF 2000) CY - Cambridge, MA, USA DA - 2000-09-05 KW - POF Durability Testing PY - 2000 SP - 209 EP - 213 PB - Information Gatekeepers Inc. CY - Cambridge, Mass. AN - OPUS4-877 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Georg A1 - Müller-Mai, C. A1 - Voigt, C. A1 - Gross, U. ED - Wise, D. L. T1 - Bone development and bone structure depend on surface roughness and structure of metalic implants KW - Bone Development KW - Surface Structure PY - 2000 SN - 0-8247-0318-9 SP - 457 EP - 481 PB - Dekker CY - New York AN - OPUS4-878 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomas, Hans-Martin A1 - Rühe, S. A1 - v. Hornhardt, A. A1 - Krull, R. T1 - Wirbelstrom-Handprüfsystem für Eisenbahnschienen N2 - Besonders in beweglichen Weichenteilen, wie z.B. Zungen und beweglichen Herzstückspitzen ist die Detektion von Rissen, die zum Bruch des Bauteils führen können, von außerordentlicher Bedeutung. Wegen der komplizierten geometrischen Randbedingungen muß der Schienenprüfzug hier seinen Prüfkopfträger anheben. Aus diesem Grund werden diese Bereiche regelmäßig durch eine manuelle Ultraschallprüfung überwacht. Da auch sehr kleine Anrisse im Oberflächenbereich interessant sind, soll das bereits vorhandene Prüfverfahren durch ein Wirbelstrom-Handprüfsystem so erweitert werden, daß eine sichere Detektion in den gefährdeten Bereichen möglich ist. Aufbau und Wirkungsweise des Wirbelstrom-Handprüfsystems werden erläutert. KW - Wirbelstrom-Handprüfsystem KW - Eisenbahnschienen PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/96.htm SN - 3-931381-32-3 VL - 73-2 IS - 2 SP - 883 EP - 889 PB - DGZfP CY - Berlin AN - OPUS4-879 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Casperson, Ralf A1 - Pohl, Rainer A1 - Thomas, Hans-Martin T1 - Berührungslose Wirbelstromprüfung mit geregelter Sondenführung bei hoher Prüfgeschwindigkeit N2 - Eine berührungslose Abtastung ist bei hoher Prüfgeschwindigkeit unabdingbar. Nur so kann ein Verschleiß der Wirbelstromsonde durch Abrieb verhindert werden. Gleichzeitig wird eine Beschädigung der zu prüfenden Oberfläche vermieden. Das Wirbelstromverfahren reagiert empfindlich auf Abstandsänderungen zwischen Wirbelstromsonde und Prüfoberfläche. Eine Trennung des Nutzsignals von dem stö-renden Abstandseffekt gelingt mit Hilfe der Phasenselektion in der Regel nur unzu-reichend. Dieses führt insbesondere bei unebenen Oberflächen zu einer Reduzie-rung der Prüfempfindlichkeit. Abhilfe schafft eine geregelte Sondenführung, bei der der Abstand konstant gehalten wird. Es wurden spezielle Sondenhalter nach zwei verschiedenen Verfahren der Ab-standsregelung entwickelt: Ein selbstregelndes System nach dem Luftkissenprinzip sowie ein elektrodynamischer Sondenhalter, angesteuert von einem elektronischen Regler. Erst durch den Einsatz der geregelten Sondenführung wurde die Detektion kleinster Inhomogenitäten (Ø = 100 µm) innerhalb von Mulden möglich. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 KW - Wirbelstromprüfung KW - ZfP KW - Berührungslos KW - Abstandsregelung PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/30.htm SN - 3-931381-32-3 VL - 73-1 IS - 2 SP - 299 EP - 308 PB - DGZfP CY - Berlin AN - OPUS4-880 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sahre, Mario A1 - Reetz, Susanne A1 - Kautek, Wolfgang A1 - Lindner, B. A1 - Medovic, A. A1 - Sleytr, U. A1 - Neubauer, A. ED - Hasche, K. ED - Mirande, W. ED - Wilkening, G. T1 - Gradient Composite Replicas from Protein Crystal Layer Templates produced by Pulsed Laser Deposition T2 - 4th Seminar on Quantitative Microscopy QM 2000 CY - Semmering, Austria DA - 2000-01-12 KW - Pulsed Laser KW - Protein Crystal Layer Templates PY - 2000 SN - 3-89701-503-X SN - 0179-0609 N1 - Serientitel: PTB-Bericht: PTB-F – Series title: PTB-Bericht: PTB-F IS - 39 SP - 8 EP - 16 PB - Physikalisch-Techn. Bundesanst. CY - Braunschweig AN - OPUS4-881 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bartoll, Jens A1 - Nofz, Marianne A1 - Stößer, R. T1 - Generation and conversion of electronic defects in calcium carbonates by UV/Vis light N2 - Radical species like CO-2,CO-3, SO-2, and SO-3 can be created by exposing natural and synthetic calcium carbonates to sunlight or to the light of a Hg(Xe) lamp. This poses as a risk for ESR dating of these materials, because the radicals formed by light exposure cannot be distinguished from those generated by radioactivity. Furthermore, paramagnetic centers like SO-2, electrons trapped near Zn2+ or Cd2+ ions, surface defects, and radicals with g?=2.0040, can be bleached in ?-irradiated samples by light and show conversion effects. KW - ESR PY - 2000 DO - https://doi.org/10.1016/S0969-8043(00)00044-0 SN - 0883-2889 SN - 0969-8043 IS - 52 SP - 1099 EP - 1105 PB - Elsevier CY - Amsterdam AN - OPUS4-892 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Karsten A1 - Rehmer, Birgit T1 - Dynamic Fracture Toughness of Ductile Cast Iron for Transport and Storage Casks T2 - Jahrestagung Kerntechnik 2000 ; Annual Meeting on Nuclear Technology 2000 CY - Bonn, Germany DA - 2000-05-23 KW - DCI KW - Ductile Cast Iron KW - Transport and Storage Casks PY - 2000 SP - 609 EP - 612 PB - INFORUM-Verl. CY - Bonn AN - OPUS4-893 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schumacher, Gerhard T1 - Crystallization in Thin Amorphous Films KW - Nucleation KW - Amorphous alloys KW - Crystallization KW - Surface energy KW - Strain energy KW - Thin film PY - 2000 SN - 0179-4841 SN - 0044-3093 PB - Hanser CY - München AN - OPUS4-898 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hennecke, Manfred T1 - Neuausrichtung einer Bundesanstalt unter den Bedingungen des "schlanken Staates" T2 - Tagung GOCh-Arbeitsgemeinschaft "Chemiker im öffentlichen Dienst" CY - Jena, Deutschland DA - 2000-10-02 PY - 2000 SP - 1(?) AN - OPUS4-899 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner A1 - Jakob, Ines ED - Cancelli, A. T1 - Comparison of oxidation stability of various geosynthetics T2 - 2nd European Geosynthetics Conference ; 2nd EuroGeo 2000 CY - Bologna, Italy DA - 2000-10-15 KW - Oxidation KW - Durability KW - Geomembrane KW - Geotextiles KW - Testing PY - 2000 SN - 88-555-2560-3 VL - 1 SP - 449 EP - 455 PB - Pàtron CY - Bologna AN - OPUS4-901 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Goebbels, Jürgen A1 - Illerhaus, Bernhard A1 - Jasiûniene, Elena A1 - Recknagel, Christoph A1 - Weidemann, Gerd T1 - Quantitative Porosimetrie mittels Röntgencomputertomographie N2 - Die sehr gute Reproduzierbarkeit von tomographischen Messungen zusammen mit den digital vorliegenden Ergebnissen ermöglicht die zerstörungsfreie dreidimensionale quantitative Analyse der untersuchten Bauteile und Proben mit Methoden der Bildverarbeitung. Vorwiegend für den Nachweis von Poren eingesetzt, lassen sich mit CT auch unterschiedliche Materialbestandteile analysieren, wobei die einzige Voraussetzung ein hinreichender Unterschied (es genügen wenige Prozent) in den Röntgenabsorptionseigenschaften der zu unterscheidenden Bestandteile ist. Mit den in der Bundesanstalt für Materialforschung und -prüfung entwickelten Computertomographieanlagen kann der Anteil von Hohlräumen und Materialbestandteilen einer Probe bestimmt werden, wobei die Größe der nachzuweisenden Bestandteile sich über mehrere Größenordnungen erstreckt. An ausgewählten Beispielen aus den Bereichen Keramik, Bodenproben und Fahr-bahnübergangssystemen aus Asphalt werden die quantitativen Ergebnisse dargestellt und die in der Bestandteilanalyse erreichbare Genauigkeit diskutiert. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/17.htm SN - 3-931381-32-3 VL - 73 IS - 2 SP - 1-(?)-8(?) PB - DGZfP CY - Berlin AN - OPUS4-922 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hentschel, Manfred P. A1 - Lange, Axel A1 - Schors, Jörg A1 - Harwardt, Michael T1 - Röntgen-Diffraktions-Rotations-Topographie von polymeren Werkstoffen N2 - Polymere Werkstoffe, insbesondere Faser-Komposite, sind auf der molekularen Skala, aber auch hinsichtlich der Faserorientierung unterschiedlich anisotrop, ebenso ihre mechanischen Eigenschaften. Diese können sich richtungsabhängig um bis zu zwei Größenordnungen unterscheiden, was für die Nutzung der Festigkeit im Leichtbau bedeutend ist. Daher besteht Bedarf an der zerstörungsfreien Charakterisierung der Orientierungs-Parameter der Mikrostruktur: Die neuartige Röntgen-Diffraktions-Rotations-Topographie nutzt (wie alle Röntgen-topographischen Verfahren) einerseits die analytischen Informationen der Röntgenstreuung und erlaubt andererseits die ortsaufgelöste Abbildung dieser Information. Für eine kontinuierliche Erfassung der Orientierungs-Informationen des Probekörpers wird dieser im eng kollimierten monochromatischen Fadenstrahl einer Weitwinkel-Streukammer verfahren. An jeder Position wird das Beugungsbild von einem um den Primärstrahl drehbaren Spalt polar abgetastet, der vor einem großflächigen Röntgen-Detektor positioniert ist. Als Rotations-, Polar- oder Textur-Topogramme werden die Streuintensitäten ortstreu dargestellt. Auswerte-Prozeduren erlauben die Ermittlung von Orientierungs-Verteilungs-Funktionen und statistischen Kennwerten. Untersuchungs-Beispiele aus einem EU-Projekt zeigen die molekularen Orientierungsverteilungen in thermoplastischen Spritzguß-Komponenten für den Helikopter-Bau, mit Korrelationen zu mechanischen Eigenschaften. Für die ESA wurde die für CFK-Sandwich-Strukturen von Satelliten-Reflektoren erforderliche präzise Orientierung der C-Fasern mit einer Genauigkeit von 0,1 Grad ermittelt. Pro Durchstrahlungsposition werden für die Orientierungs-Information nur wenige Sekunden benötigt. Die verwendete 18 keV Mo-k-a-Strahlung erlaubt Wandstärken bis zu etwa 20 mm. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/39.htm SN - 3-931381-32-3 VL - 73-1 IS - 2 SP - 1 EP - 10 PB - DGZfP CY - Berlin AN - OPUS4-927 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weh, Lothar T1 - Oberflächencharakterisierung von Polymer- und Polymermatrix-Keramik-Schichten T2 - Kolloquium "Innovative Forschung in der WIP-Nachfolge" CY - Berlin, Deutschland DA - 2000-06-29 KW - Polymere KW - Keramik KW - Oberfläche KW - Fließprozesse PY - 2000 SP - 121 EP - 124 AN - OPUS4-930 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meier, Klaus A1 - Recknagel, Angelika A1 - Recknagel, Sebastian T1 - New Certified Reference Materials (CRM) of the Federal Institute for Materials Research and Testing (BAM) for the analysis of non ferrous metals and their alloys T2 - Symposium "Reference Materials for Technologies in the New Millenium" CY - Berlin, BAM, Germany DA - 2000-05-22 PY - 2000 SP - 1(?) EP - 9(?) AN - OPUS4-931 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Sebastian T1 - Certified reference materials for the analysis of iron and steel products (EURONORM-CRMS) - Preparation, certification, programme T2 - Symposium "Reference Materials for Technologies in the New Millenium" CY - Berlin, BAM, Germany DA - 2000-05-22 PY - 2000 SP - 1 EP - 7(?) AN - OPUS4-932 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weh, Lothar T1 - Instability of the Contact Line between Three Fluid Phases during Mass Transfer Processes N2 - The movable contact line between two liquids and a gas phase sensitively reacts to small disturbances in the force equilibrium. The shape of the contact line and the adjoining interfaces is determined by the interface and surface tensions, the contact angles, the density differences (hydrostatic pressure), and the Laplace capillary pressure. When these change, the three-phase contact line can deform and even become unstable. Interface and surface tension depend on the concentration and temperature. During mass transport processes (concentration changes) various forms of the instability of the contact line can be observed: —Oscillations of a circular contact line (regular expansion and reduction); —Single deformations (bulges) which quickly disappear again; —Deformations (bulges) which run along the boundary line; —Periodically generated and damped deformations with different modes. The behavior of the three-phase contact line is of practical importance for coalescence processes and for spontaneous emulsification on liquid surfaces. KW - Interface instability KW - Three phase contact KW - Surface tension KW - Contact angle PY - 2000 DO - https://doi.org/10.1006/jcis.2000.6858 SN - 0021-9797 SN - 1095-7103 VL - 227 IS - 1 SP - 42 EP - 47 PB - Elsevier CY - Orlando, Fla. AN - OPUS4-933 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weh, Lothar A1 - Müller, Ralf A1 - Moseler, D. A1 - Heide, G. A1 - Frischat, G. T1 - Topographische Untersuchungen von Glasoberflächen mit Vickers-Eindrücken T2 - 74. Glastechnische Tagung CY - Ulm, Deutschland DA - 2000-05-29 PY - 2000 SP - 237 EP - 240 PB - DGG, Dt. Glastechn. Ges. CY - Frankfurt/M. AN - OPUS4-934 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tscharntke, Dirk A1 - Wüstenberg, Hermann A1 - Erhard, Anton T1 - Bewertung kritischer Befunde bei der Ultraschallprüfung an Schweißnähten mit Modellrechnungen N2 - Typische Probleme bei der Schweißnahtprüfung mit Ultrschall entstehen bei ferritischen Werkstoffen vor allem durch Anzeigen von der Nahtkontur, vor allem aus dem Wurzelbereich. Die klassischen Methoden der Unterscheidung formbedingter Anzeigen von Fehlern - z.B. durch Vergleich der A-Bilder von beiden Seten einer Stumpfnaht - können unterstützt werden durch die Modellierung derartiger Anzeigen im Zusammenhang mit hypothetischen Fehlern im wurzelnahen Bereich. Im Beitrag wird die Anwendung vereinfachender Modelle auf diese Problematik vorgestellt und an Beispielen demonstriert. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 KW - Ultraschallprüfung KW - Schweißnahtprüfung KW - Modellrechnungen PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/10.htm SN - 3-931381-32-3 VL - 73-1 IS - 2 SP - 105 EP - 117 PB - DGZfP CY - Berlin AN - OPUS4-936 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bonse, Jörn A1 - Krüger, Jörg A1 - Kautek, Wolfgang A1 - Wrobel, J. M. T1 - Femtosecond pulse laser machining of InP wafers N2 - Ablation of indium phosphide wafers in air was performed with 130 fs laser pulses at a wavelength of 800 nm at a low repetition rate of 10 Hz. In order to evaluate the role of the incubation effects, the relationship between the number of laser pulses used for the ablation and the threshold fluence was studied. Particular attention was paid to the chemical composition, surface morphology and structural variations of the ablated area. T2 - 5th Laser Applications in Microelectronics and Optoelectronics Manufacturing Conference (LAMOM) CY - San José, CA, USA DA - 240.01.2000 KW - Femtosecond laser ablation KW - Indium phosphide KW - Auger electron spectroscopy PY - 2000 SN - 0-8194-3550-3 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 3933 SP - 280 EP - 287 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-937 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nofz, Marianne A1 - Bartoll, Jens A1 - Stößer, R. T1 - Complementarity of ESR and optical absorption of gamma-irrradiated silicate glasses N2 - Radiation defects in alkaline earth silicate glasses are studied by means of ESR and optical spectroscopies. Previously undiscovered relations between findings of both methods are deduced using four different experimental tools: (i) variation of chemical glass composition; (ii) isochronal annealing of ggr-irradiated samples; (iii) optical bleaching of ggr-irradiated samples; (iv) variation of the ggr-dose. Oxygen hole centres are mainly responsible for the radiation induced absorption in the visible part of the optical spectrum. Previously undescribed electron centres with broad and asymmetric ESR resonances (gprime=1·955) contribute to the optical spectra (200–2000 nm) in a small way. It is suggested they are electrons trapped on small aggregates of alkaline earth ions. The radiation induced recharging of incorporated Fe3+ ions is also evidenced by optical and ESR spectroscopies. Fe3+ ions react as electron traps forming not only Fe2+ but also {Fe3+}- species which might be responsible for an absorption band at 300 nm. A correlation was found between the changes of intensity with those of the ESR spectroscopically detected Fe3+ content of the samples. PY - 2000 UR - http://www.ingentaconnect.com/content/sgt/pcg/2000/00000041/00000003/4103140 SN - 0031-9090 VL - 41 IS - 3 SP - 140 EP - 149 PB - Thornton CY - Sheffield AN - OPUS4-938 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nehls, Irene T1 - Entwicklung, Herstellung und Einsatz von Referenzmaterialien für die organische Umweltanalytik T2 - Analytica Conference 2000 CY - München, Deutschland DA - 2000-04-11 PY - 2000 SP - 1(?) CY - München AN - OPUS4-939 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schulz, Eduard A1 - Erhard, Anton A1 - Heinrich, W. A1 - Mohr, F. T1 - Nachqualifikation einer Wasserreibbremse mit Ultraschall N2 - Neu entwickelte Gasturbinen werden im Prüffeld mit wechselnden Belastungen beaufschlagt. Dazu wird die Gasturbine mit einer Wasserreibbremse gekoppelt, mit der eine definierte Last erzeugt werden kann. Ursprünglich war die Wasserreibbremse für eine bestimmte Leistung, die den früheren Leistungen der Gasturbine entsprach, ausgelegt worden. Die erste Prüfung fand im Jahr 1975 statt. Da neuere Gasturbinen wesentlich höhere Leistungen erbringen und die vorhandene Wasserreibbremse weiterhin eingesetzt werden sollte, musste eine Nachqualifizierung vorgenommen werden. Das Ziel war die Absicherung auf eine mögliche Sprödbruchgefahr. Zunächst wurde eine Studie zur Prüfbarkeit erstellt. An speziellen Testkörpern wurden im Ultraschallabor der BAM Vorversuche zur Machbarkeit, zur Empfindlichkeitsein-stellung und zur Vorbereitung der Prüfung durchgeführt. Dazu wurden spezielle Gruppenstrahlerprüfköpfe gefertigt und ein an die komplizierte Geometrie der Bremsscheiben angepasster Manipulator gebaut. Ferner wurde, um die Prüfzeiten zu reduzieren, die Software zur Datenerfassung und zur Auswertung angepasst. Im Werk Berlin der Siemens AG wurde in Zusammenarbeit mit der Siemens AG Erlangen eine Ultraschallprüfung mit der Gruppenstahlertechnik der Wasserreibbremse durchgeführt. Überprüft wurde das gesamte Volumen auf axial, radial und tangential beanspruchte Fehler in den Bereichen der Welle und der Bremsscheibe.Die Überprüfung ergab keine relevanten Fehler, so dass die Wasserreibbremse weiterhin eingesetzt werden kann. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/79.htm SN - 3-931381-32-3 VL - 73 IS - 2 SP - 1(?) EP - 7(?) PB - DGZfP CY - Berlin AN - OPUS4-940 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Jansky, Hans-Joachim A1 - Neumann, Volker A1 - Pelzer, J. T1 - Aufbereitungsuntersuchungen an schwermetallbelastetem Baggergut aus dem ältesten Kanal Deutschlands PY - 2000 SN - 0942-5675 IS - 4 SP - 44 EP - 50 PB - Vereinigte Fachverl. CY - Mainz AN - OPUS4-941 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kipphardt, Heinrich A1 - Valkiers, S. A1 - Taylor, P.D.P. A1 - De Bièvre, P. T1 - Calibration in isotopic measurements N2 - The meaning of calibration in general and in the field of isotopic measurements in particular is described, stressing the fundamental difference between calibration as an aim and tools to achieve calibration. The role of proper uncertainty budgeting as a prerequisite for establishing a “calibrated” measurement is explained. It leads to the recommendation that the quality of the uncertainty statement should be heavily weighed when ranking or judging “calibrated” isotopic measurement results evaluated by the Commission on Atomic Weight and Isotopic Abundances. KW - Calibration KW - Uncertainty KW - Measurement result KW - Isotopic measurement PY - 2000 DO - https://doi.org/10.1016/S1387-3806(00)00162-7 SN - 0168-1176 SN - 0020-7381 SN - 1387-3806 SN - 1873-2798 VL - 198 IS - 1-2 SP - 71 EP - 76 PB - Elsevier CY - Amsterdam AN - OPUS4-912 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kipphardt, Heinrich A1 - Ding, T. A1 - Valkiers, S. A1 - Quetel, C. A1 - De Bièvre, P. A1 - Taylor, P. A1 - Gonfiantini, R. T1 - Preparation of two synthetic isotope mixtures for the calibration of isotope amount ratio measurements of sulfur N2 - Two synthetic isotope mixtures for the calibration of sulfur isotope amount ratio measurements were gravimetrically prepared from high purity Ag2S materials enriched in 32S, 33S, and 34S. The mixtures were made so as to closely resemble the (natural) isotopic composition of the materials to be “calibrated”. This allowed a totally independent evaluation, on the same samples, of the relative combined uncertainty of: (a) the procedure to perform direct measurements of the amount of substance ratios of gas isotopes in the redetermination of the Avogadro constant and (b) the gravimetric preparation procedure. The result of both procedures, mass spectrometry and gravimetry, agree to a relative uncertainty of 3 × 10-4 for sulfur amount ratio measurements of the major abundant isotopes. Thus it seems that a direct measurement of isotopic gas mixtures (e.g. of natural isotopic composition) is now possible for sulfur—and probably also for other gaseous isotopes—without necessarily having to rely on “calibration” by means of values provided by measurements of gravimetrically prepared isotope mixtures. However, synthetic mixtures may be needed for validation and verification purposes, in particular for quality assurance. KW - Sulfur KW - Absolute isotope amount ratio KW - Synthetic isotope mixtures KW - Sulfur hexafluoride KW - Mass spectrometry PY - 2000 DO - https://doi.org/10.1016/S1387-3806(99)00235-3 SN - 0168-1176 SN - 0020-7381 SN - 1387-3806 SN - 1873-2798 VL - 197 IS - 1-3 SP - 131 EP - 137 PB - Elsevier CY - Amsterdam AN - OPUS4-913 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kipphardt, Heinrich A1 - Ruße, K. A1 - Bréas, O. A1 - Valkiers, S. A1 - Taylor, P. T1 - Fluorination of organic materials into CF4 for the measurements of carbon isotope ratios T2 - V Isotope Workshop CY - Krakow, Poland DA - 2000-07-01 PY - 2000 IS - poster P1-1 AN - OPUS4-914 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Matschat, Ralf A1 - Dudzus, Thomas A1 - Meier, Klaus A1 - Recknagel, Sebastian A1 - Kipphardt, Heinrich A1 - Hedrich, Martina ED - Hirschfeld, D. T1 - Messung von Sauerstoff und Stickstoff mit klassischer Trägergasheißextraktion und Trägergasheißextraktion nach Aktivierung mit Photonen für die nationalen primären Kalibriernormale T2 - 8. Symposium Nichtmetalle in Metallen - NIM ; 8. Tagung des Gemeinschaftsausschusses "Nichtmetalle in Metallen" der GDMB CY - Münster, Deutschland DA - 2000-03-16 PY - 2000 SN - 3-9806913-1-4 SP - 19 EP - 27 PB - GDMB, Ges. für Bergbau, Metallurgie, Rohstoff- und Umwelttechnik CY - Clausthal-Zellerfeld AN - OPUS4-915 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kipphardt, Heinrich A1 - De Bièvre, P. T1 - How to establish traceability in chemical measurements and reference materials? T2 - Symposium "Reference Materials for Technologies in the New Millenium" CY - Berlin, BAM, Germany DA - 2000-05-22 KW - Traceability KW - Reference materials KW - Uncertainty KW - Matrix reference materials KW - Amount standards PY - 2000 SP - 1(?) EP - 7(?) AN - OPUS4-916 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Georg A1 - Steinhauser, E. A1 - Willmann, G. A1 - Liesner, C. A1 - Willems, U. A1 - Grössl, H. T1 - Biokompatible Werkstoffe - Ersatzteile für Menschen T2 - Podiumsdiskussion zur Materialica 2000 CY - München, Deutschland DA - 2000-09-26 PY - 2000 AN - OPUS4-918 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günther, Achim T1 - Gefährlichkeit und Gefahr für die Umwelt - Kriterien für die Einstufung chemischer Stoffe T2 - Jahrestagung der Gesellschaft Deutscher Chemiker, Fachgruppe Umweltchemie und Ökotoxikologie 2000 ; GDCh-Jahrestagung 2000 CY - Bayreuth, Deutschland DA - 2000-10-07 KW - Umweltchemie KW - Ökotoxikologie PY - 2000 SP - 1(?) AN - OPUS4-920 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Steffen, Bernd T1 - The flexible scope of Accreditation T2 - 5th Eurolab Symposium CY - Edinburgh, Scotland, UK DA - 2000-10-04 PY - 2000 SP - 1(?) EP - 7(?) AN - OPUS4-921 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schröder, Hartmut A1 - Bahr, Horst A1 - Zeynalov, Eldar T1 - Determination of phenolic antioxidant stabilizers in PP and HDPE by means of an oxidative model reaction T2 - 6th International Plastics Additives and Modifiers Conference ; 6th Addcon World 2000 CY - Basel, Switzerland DA - 2000-10-25 PY - 2000 SN - 1-85957-242-1 IS - Paper 3 SP - 1 EP - 15(?) PB - RAPRA Technology Ltd. CY - Shawbury AN - OPUS4-952 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -