TY - JOUR A1 - Droste, Bernhard T1 - Geprüfte Sicherheit (II.) PY - 1998 SN - 0016-5808 VL - 10 SP - 31 EP - 33 PB - Storck CY - Hamburg AN - OPUS4-21605 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Lange, Karsten A1 - Bartusch, Jürgen A1 - Möhrle, Walter A1 - Wüstenberg, Hermann A1 - Fröhlich, H.-J. T1 - Fokussierende Wandlerzeile zur Ultraschall-Untersuchung kleiner Schweißnähte N2 - Die Ultraschallmikroskopie von kleinen Bauteilen mit fokussierenden Prüfköpfen ist seit Jahren gängige Praxis. Leider Ist sie für den Einsatz in der On-Line- Qualitätskontrolle zu zeitaufwändig. Deshalb wurde an der Bundesanstalt für Materialforschung und -prüfung (BAM) auf der Basis von Polyvinyliden-Fluorid (PVDF) wurde eine fokussierende Wandlerzeile entwickelt Sie ist Teil eines Prüfgerätes, das durch die Verbindung von mechanischer und elektronischer Steuerung des Ultraschallfeldes hohe Abtastgeschwindigkeiten erreicht. Dadurch, können die Prüfzeiten so stark reduziert werden, dass eine On-line-Nutzung möglich wird. Das Ultraschallfeld der Wandlerzeile wurde dreidimensional ausgemessen und das Ergebnis mit einem numerischen Modell /1/ verglichen. Die Übereinstimmung zwischen berechnetem und gemessenem Schallfeld war sehr gut. Eine Optimierung der elektronischen Ansteuerung führte darüberhinaus zu einer erheblichen Reduzierung der störenden Nebenmaxima. Die Mittenfrequenz der Prüfimpulse liegt über 15 MHz und der Fokus des Prüfkopfes beträgt weniger als 0,5 mm im Durchmesser. Mit dieser Wandlerzeile und der entsprechenden elektronischen Steuerung wurde eine Aluminium-Schweißnaht untersucht, die vorher mit einem konventionellen fokussierenden Prüfkopf abgetastet worden war. Beide Prüfergebnisse zeigen die gleiche Strukturauflösung, so dass der Zeitgewinn uneingeschränkt als Vorteil für die Wandlerzeile zu Buche schlägt. T2 - DGZfP-Jahrestagung 1998 CY - Bamberg, Deutschland DA - 1998-09-07 PY - 1998 SN - 3-931381-23-4 IS - DGZfP-BB 63 SP - 477 EP - 483 AN - OPUS4-22936 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bruckschen, Walther A1 - Schmidt, Sascha A1 - Schulz-Forberg, Bernd A1 - Ludwig, Jörg A1 - Ulrich, Armin T1 - Wir sind Dienstleister! PY - 1998 SN - 0944-6117 IS - 7 SP - 24 EP - 25 PB - Vogel CY - München AN - OPUS4-20027 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nolze, Gert A1 - Kraus, Werner T1 - PowderCell 2.0 for Windows N2 - PowderCell contains a comfortable, user friendly visualization and modification tool for crystal structures. It provides on-line calculation of the corresponding powder diffraction patterns simulating a variety of experimental conditions. The common ICSD and Shelx file formats are supported for importing crystal structure information. It has control of automatic cell transformation and also derivation of subgroups. More than 740 different settings of the 230 space-group types are supported. Up to ten crystal structures can be considered simultaneously. A full pattern refinement enables the direct comparison with experimental diffractograms for quantitative phase analysis, lattice parameter refinement, polynomial background estimation, etc. KW - XRD KW - Simulation KW - Powdercell KW - Software KW - Programming KW - Phase mixtures KW - Crystal structure KW - Subgroup PY - 1998 SN - 0885-7156 VL - 13 IS - 4 SP - 256 EP - 259 PB - Cambridge University Press AN - OPUS4-38037 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kraus, Werner A1 - Nolze, Gert T1 - PowderCell as teaching tool N2 - PowderCell represents a user friendly program which supports the solution of scientific problems as well as teaching and education. Especially for the last one the program offers a lot of information regarding the space-group type as well as crystal structure used. Therefore, on some universities the program is used successfully to make students familiar with x-ray crystallography. The quasi-simultaneous diffraction pattern simulation visualized the changes caused by the respective crystal structure. However, it is also possible to vary different diffraction parameters and investigate the resulting changes in the interference intensity or the reflection position. In principle, the aim of the program is the intuitive generation of structure models. Therefore, special tools have been implemented to move (rotate or shift) or transform the crystal structure. KW - Simulation KW - PowderCell KW - Crystal structure KW - XRD KW - Neutron KW - Programming PY - 1998 VL - 20 SP - 27 EP - 29 AN - OPUS4-38055 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klingbeil, Dietmar A1 - Kiyak, Yusuf T1 - Experimentelle und numerische Untersuchungen zum Versagensverhalten von Rohren aus dem Stahl 15 NiCuMoNb 5 unter Anwendung bruch- und schädigungsmechanischer Konzepte - Teil 2: Schädigungsmechanische Modellierung des Versagensverhaltens T2 - 24. MPA-Seminar - Sicherheit und Verfügbarkeit in der Anlagentechnik mit dem Schwerpunkt Integrität und Lebensdauermanagement CY - Hannover, Germany DA - 1998-10-08 PY - 1998 SN - 0943-3473 VL - 2 SP - Beitrag 34 AN - OPUS4-32875 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Häcker, Ralf A1 - Wossidlo, Peter T1 - Meßunsicherheiten bestimmen - Am Beispiel der Ermittlung von Rißwiderstandskurven PY - 1998 SN - 0025-5300 VL - 40 IS - 9 SP - 361 EP - 365 PB - Carl Hanser Verlag CY - München AN - OPUS4-33404 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eberle, Arno A1 - Sievert, Rainer A1 - Schiller, Wolfgang Arno T1 - Flip-Chip-Lotbumps thermisch-zyklisch belastet - Einfluß des Substratmaterials auf das viskoplastische Verhalten von Flip-Chip-Lotbumps PY - 1998 SN - 0025-5300 VL - 40 IS - 9 SP - 350 EP - 352 PB - Carl Hanser Verlag CY - München AN - OPUS4-33715 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reier, T. A1 - Schultze, J. W. A1 - Österle, Werner A1 - Buchal, C. T1 - Nucleation and growth of AlN nanocrystallites prepared by N+2 implantation N2 - The formation of AlN films prepared by N+2 ion implantation into aluminium was investigated using X-ray and Auger photoelectron spectroscopy ( XPS, AES) as well as cross-sectional transmission electron microscopy (XTEM). After 100-keV N+2 implantation of low doses (1×1017 cm−2), the formation of hexagonal AlN nanocrystals (crystal size <5 nm, Ncrystal=1017 cm−3) was observed. Their orientation is strongly correlated with the aluminium matrix. With the dose increasing to 3×1017 cm−2, crystal growth follows, finally forming a homogeneous AlN-layer. Furthermore, the diffraction patterns show an increasing amount of misorientation with increasing dose. From the crystal size distribution, we conclude that continuous nucleation takes place. Samples implanted with an energy of 3 keV exhibit analogous behaviour. Nitride growth was further investigated using microstructured AlN formed by 3-keV implantation through movable TEM-masks (structure size: 15–150 mm). In the case of high N+2 doses (D&5×1017 cm−2), AlN is detected by AES in the shielded area at a distance of up to 10 mm from the exposed region. The Diffusion coefficient was calculated to be 10−10 cm2 s−1. The formation of AlN proceeds in two steps. After a continuous nucleation, diffusion-assisted Crystal growth takes place until a homogeneous AlN layer results. KW - Aluminium nitride KW - Ion implantation KW - Nanocrystallites KW - Surface analysis KW - XTEM PY - 1998 SN - 0257-8972 VL - 103-104 SP - 415 EP - 420 PB - Elsevier AN - OPUS4-38539 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kuhmann, J. F. A1 - Chiang, C. H. A1 - Harde, P. A1 - Reier, F. A1 - Österle, Werner A1 - Urban, Ingrid A1 - Klein, A. T1 - Pt thin-film metallization for FC-bonding using SnPb60/40 solder bump metallurgy N2 - Platinum does not form any adherent oxides and can be easily wetted by tin-based solders. Platinum is also an available metallization in semiconductor laboratories. Therefore we investigated the diffusion of platinum thin-film metallizations into eutectic tin–lead solder by using a high-resolution secondary ion mass spectroscopy (SIMS) profiling from the back side. It is shown that an intermetallic phase (PtSn4) is formed during soldering, which controls the consumption of platinum during soldering and in operation. The consumption of platinum follows the well-known parabolic diffusion law. The activation energy of this process is 0.63 eV. Even at extended heating cycles of 2 min at 250°C, 190 nm from the original 300 nm of the platinum film remain undissolved. This high stability makes platinum a very attractive thin-film metallization for flip-chip (FC) bonding of new microsystems. KW - Pt thin film metallization KW - FC solder bonding KW - Diffusion KW - SIMS PY - 1998 SN - 0921-5093 VL - A242 SP - 22 EP - 25 PB - Elsevier AN - OPUS4-38540 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - VIDEO T1 - IBC im Feuer N2 - IBC (Intermediate Bulk Container) sind Großpackmittel. Die gängigsten IBC bestehen aus einer Palette mit Kunststofftank mit einem maximalen Volumen von 3000 Litern und einem einfachen Gitterrohrrahmen. Werden Gefahrgüter darin transportiert, müssen die IBC zugelassen sein. Für die Zulassung ist die BAM zuständige Behörde in Deutschland. Eine Zulassung beinhaltet sicherheitstechnische Prüfungen, z. B. Brandtests. Bei diesen Prüfungen muss der Behälter beweisen, dass er für den Gefahrguttransport einsetzbar ist. KW - IBC PY - 1998 VL - 36 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-45529 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - VIDEO T1 - IBCs on fire N2 - IBC is short for Intermediate Bulk Containers. The most common IBCs consist of a palette, a plastic tank with a maximum volume of 3000 litres and a simple pipe grid frame. If dangerous goods are transported in it, the IBC must be certified. BAM is the relevant authority for the approval within Germany. An approval contains safety engineering tests, e.g. fire tests, and these tests must prove that the container is suitable for dangerous goods transport. KW - IBCs PY - 1998 VL - 37 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-45530 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - VIDEO T1 - Stahlbeton im Test N2 - Stahlbeton ist der am häufigsten verwendete Baustoff und wird in Gebäuden und Brücken für tragende Elemente eingesetzt. Die Mischung aus Stahlstäben und Beton ist hoch belastbar und flexibel gestaltbar. Die BAM verfügt über spezielle Untersuchungsanlagen, in denen Platten und Balken aus Stahlbeton sowohl statisch als auch dynamisch belastet werden können. Untersuchungsergebnisse führen u. a. dazu, dass Materialien bei gleicher Sicherheit wirtschaftlicher eingesetzt werden können. KW - Stahlbeton PY - 1998 VL - 38 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-45531 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - VIDEO T1 - Testing reinforced concrete N2 - Reinforced concrete is the most frequently used building material for load-bearing components in buildings and bridges. The mix of steel bars and concrete is capable of carrying high loads and can be shaped easily. BAM possesses special test equipment in which plates and girders from reinforced concrete can be tested using both static and dynamic loads. The test results indicate that materials can be used more economically while maintaining the same level of safety. KW - Testing Reinforced Concrete PY - 1998 VL - 39 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-45532 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - VIDEO T1 - Fahrbahnübergänge aus Asphalt N2 - Als Fahrbahnübergang bezeichnen Ingenieure ein Verbindungsstück zwischen der Fahrbahn einer freien Strecke und der Fahrbahn einer Brücke oder einem Tunnel. Für diese Übergänge wird Stahl und seit den 1980er Jahren auch Asphalt eingesetzt. Der Aufwand für Wartung und Reinigung ist bei Übergängen aus Asphalt gering; der Fahrkomfort relativ hoch. Die BAM entwickelte geeignete Prüfverfahren und Anforderungskriterien zur Qualitätssicherung solcher Übergänge. Mit den Erkenntnissen wurde ein neues Regelwerk erstellt, das die Grundlage für die Zulassung von Fahrbahnübergängen aus Asphalt bildet. KW - Fahrbahnübergänge KW - Asphalt PY - 1998 VL - 40 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-45533 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - VIDEO T1 - Asphaltic plug joints N2 - The section of roadway between the normal carriageway and the road surface of a bridge or tunnel is called a ‘roadway transition’ or 'asphaltic plug joints' by engineers. Steel is normally used for these transitions but since the 1980s, asphalt has also been used. The cost of maintaining and cleaning asphalt transitions is low and travel comfort is relatively high. BAM has developed suitable test criteria and methodologies for quality assuring such transitions. A new set of rules has been established based on the findings which now forms the basis for the approval of asphalt roadway transitions. KW - Asphalt KW - Plug Joints PY - 1998 VL - 41 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-45537 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - VIDEO T1 - Bioabbaubare Kunststoffe N2 - Recycling vermindert das Entsorgungsproblem von Kunststoffabfall, jedoch entstehen dabei zusätzliche Kosten. Ideal wäre es, wenn Kunststoffprodukte Teil eines biologischen Stoffkreislauf werden könnten, indem Mikroorganismen die Produkte in ihre Grundbestandteile zerlegen. Die BAM wirkte maßgeblich mit an der Entwicklung eines normierten Verfahrens zur Prüfung der biologischen Abbaubarkeit von Kunststoffen. Heute finden sich Produkte aus kompostierbarem Kunststoff im Handel. KW - Bioabbaubar KW - Kunststoffe PY - 1998 VL - 34 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-45527 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - VIDEO T1 - Biodegradable plastics N2 - Recycling decreases the disposal problem of plastic waste, however this gives rise to additional costs. It would be ideal if plastic products could become part of a biological material cycle where the products could be decomposed by microorganisms into their basic components. BAM has made a major contribution to the development of a standardised method for testing the biological degradability of plastics. Nowadays products of compostable plastic are available in shops. KW - Biodegradable KW - Plastics PY - 1998 VL - 35 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-45528 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaber, Martin A1 - Müller, Ralf A1 - Höland, W. T1 - Degassing phenomena during sintering and crystallization of glass powders N2 - Degassing may cause trouble in manufacture of sintered glass-ceramics via the Formation of bubbles (deteriorate mechanical strength or surface Quality) T2 - 6th Int. Otto Schott Colloquium CY - Jena, Germany DA - 06.09.1998 KW - Bulk diffusion KW - Sintering KW - Crystallization KW - Melting PY - 1998 AN - OPUS4-35785 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN ED - Wloka, Monika T1 - DAR-aktuell - Kurzinformation - Akkreditierung, Zertifizierung, Prüfung - Jahrgang 6, Ausgabe 1 T1 - DAR-aktuell - newsletter - accreditation, certification, testing - volume 6, edition 1 N2 - Die hier vorliegende Kurzinformation hat das Ziel, über Neues auf dem Gebiet der Akkreditierung, Zertifizierung und Prüfung in Deutschland und Europa sowie über Inhalte und Ergebnisse der Arbeit verschiedener auf diesem Sektor tätigen Organisationen zu informieren. N2 - The aim of this newsletter is to inform about new developments in the area of accreditation, certification and testing in Germany and Europe as well as about topics and results of the work of several organisations that are active in this sector. PY - 1998 SN - 1436-154X SN - 1436-1558 SN - 1436-2082 N1 - Volltext (PDF) in deutsch und englisch - Full text (PDF) in German and English VL - 6 IS - 1 SP - 1 EP - 4 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-40146 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN ED - Wloka, Monika T1 - DAR-aktuell - Kurzinformation - Akkreditierung, Zertifizierung, Prüfung - Jahrgang 6, Ausgabe 2 T1 - DAR-aktuell - newsletter - accreditation, certification, testing - volume 6, edition 2 N2 - Die hier vorliegende Kurzinformation hat das Ziel, über Neues auf dem Gebiet der Akkreditierung, Zertifizierung und Prüfung in Deutschland und Europa sowie über Inhalte und Ergebnisse der Arbeit verschiedener auf diesem Sektor tätigen Organisationen zu informieren. N2 - The aim of this newsletter is to inform about new developments in the area of accreditation, certification and testing in Germany and Europe as well as about topics and results of the work of several organisations that are active in this sector. PY - 1998 SN - 1436-154X SN - 1436-1558 SN - 1436-2082 N1 - Volltext (PDF) in deutsch und englisch - Full text (PDF) in German and English VL - 6 IS - 2 SP - 1 EP - 4 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-40147 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN ED - Wloka, Monika T1 - DAR-aktuell - Kurzinformation - Akkreditierung, Zertifizierung, Prüfung - Jahrgang 6, Ausgabe 3 T1 - DAR-aktuell - newsletter - accreditation, certification, testing - volume 6, edition 3 N2 - Die hier vorliegende Kurzinformation hat das Ziel, über Neues auf dem Gebiet der Akkreditierung, Zertifizierung und Prüfung in Deutschland und Europa sowie über Inhalte und Ergebnisse der Arbeit verschiedener auf diesem Sektor tätigen Organisationen zu informieren. N2 - The aim of this newsletter is to inform about new developments in the area of accreditation, certification and testing in Germany and Europe as well as about topics and results of the work of several organisations that are active in this sector. PY - 1998 SN - 1436-154X SN - 1436-1558 SN - 1436-2082 N1 - Volltext (PDF) in deutsch und englisch - Full text (PDF) in German and English VL - 6 IS - 3 SP - 1 EP - 4 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-40148 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg T1 - The Low-Cycle Fatigue of Fibre-Metal-Hybrid Structures T2 - Fourth Internal Conference on Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials (LCF 4) CY - Garmisch-Partenkirchen, Germany DA - 1998-09-10 PY - 1998 AN - OPUS4-5996 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mair, Georg ED - Rie, K.-T. ED - Portella, Pedro Dolabella T1 - The Low-Cycle Fatigue of Fibre-Metal-Hybrid Structures T2 - 4th International Conference on Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials CY - Garmisch-Partenkirchen, Germany DA - 1998-09-07 PY - 1998 SN - 0-08-043326-X PB - Elsevier CY - Amsterdam AN - OPUS4-6036 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ziebs, Josef A1 - Meersmann, Jürgen A1 - Kühn, Hans-Joachim A1 - Klingelhöffer, Hellmuth T1 - Multiaxial Thermo-mechanical Deformation Behavior of IN 738 LC and SC 16 T2 - IV. Symposium on Thermo-mechanical Fatigue Behavior of Materials: Third Volume CY - Querétaro, Mexico DA - 1998-11-04 PY - 1998 AN - OPUS4-3129 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Droste, Bernhard A1 - Gogolin, B. A1 - Rödel, R. A1 - Völzke, Holger A1 - Kowalewsky, Helmut T1 - Die sicherheitstechnische Prüfung von Tranport- und Lagerbehältern für abgebrannte Kernbrennstoffe T2 - Jahrestagung Kerntechnik `98 CY - München, Deutschland DA - 1998-05-26 PY - 1998 SN - 0720-9207 SP - 279 EP - 282 PB - Inforum AN - OPUS4-21607 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Völzke, Holger A1 - Zencker, Uwe A1 - Wieser, Günter A1 - Droste, Bernhard T1 - Testing and licensing of radioactive waste containers for disposal in Germany T2 - DisTec `98 - International conference on radioactive waste disposal CY - Hamburg, Germany DA - 1998-09-09 PY - 1998 VL - 2 SP - 431 EP - 436 PB - KONTEC CY - Hamburg AN - OPUS4-21608 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wieser, Günter A1 - Droste, Bernhard A1 - Martens, B.-R. A1 - Probst, Ulrich A1 - Schreiber, D. A1 - Völzke, Holger ED - Droste, B. ED - Kowalewsky, H. T1 - Thermal test of a cubic ductile cast iron container filled with an ion exchanger resin T2 - PATRAM 98 - 12th International conference on the packaging and transportation of radioactive materials CY - Paris, France DA - 1998-05-10 PY - 1998 VL - 1 SP - 429 EP - 435 PB - Nuclear Technology Publishing CY - Paris, France AN - OPUS4-21560 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zencker, Uwe A1 - Quercetti, Thomas A1 - Wieser, Günter A1 - Völzke, Holger A1 - Droste, Bernhard ED - Droste, B. ED - Kowalewsky, H. T1 - Mechanical impact assessment of cubic waste containers depending on target construction T2 - PATRAM 98 - 12th International conference on the packaging and transportation of radioactive materials CY - Paris, France DA - 1998-05-10 PY - 1998 VL - 3 SP - 1152 EP - 1159 PB - Nuclear Technology Publishing CY - Paris, France AN - OPUS4-21556 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zeisler, Peter A1 - Droste, Bernhard A1 - Rehmer, Birgit A1 - Rödel, R. ED - Droste, B. ED - Kowalewsky, H. T1 - A new fracture mechanics assessment method for ferritic steel components of type B packages T2 - PATRAM 98 - 12th International conference on the packaging and transportation of radioactive materials CY - Paris, France DA - 1998-05-10 PY - 1998 VL - 1 SP - 309 EP - 316 PB - Nuclear Technology Publishing CY - Paris, France AN - OPUS4-21558 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wieser, Karol E. ED - Schulz-Forberg, Bernd ED - Droste, B. ED - Zeisler, Peter T1 - Sicherheitstechnische Begutachtung von Transportbehältern T2 - 1. Deutsch-Sowjetisches Seminar Erfahrungen und zukunftsträchtige Verfahren auf dem Gebiet der Lagerung und des Transportes von abgebrannten Kernbrennstoffen CY - Leningrad, Sowjetunion DA - 1988-06-27 PY - 1998 SP - 59 EP - 75 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-19764 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Roland A1 - Lehnik-Habrink, Petra A1 - Wachholz, S. T1 - BAM-Referenzmaterialien für die Analytik von polychlorierten Biphenylen (PCB) in Altölen sowie polyzyklischen aromatischen Kohlenwasserstoffen (PAK) und Mineralölkohlenwasserstoffen (MKW) in Böden T2 - 11th International Colloquium Tribology, Industrial and Automotive Lubrication CY - Esslingen am Neckar, Germany DA - 1998-01-13 PY - 1998 AN - OPUS4-5682 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Roland T1 - Zinc-dithialkyldithiophosphates in engine oils - Determination of Conent, Composition and Degradation during Operation using Gas and Liquid Chromatography T2 - 11th International Colloquium Tribology, Industrial and Automotive Lubrication CY - Esslingen am Neckar, Germany DA - 1998-01-13 PY - 1998 AN - OPUS4-5683 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Roland A1 - Reich, Peter A1 - Scharf, Holger T1 - BAM-Ringversuche zur Altlastenanalytik T2 - Analytica Conference 1998 CY - Munich, Germany DA - 1998-04-21 PY - 1998 AN - OPUS4-5817 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Wachtendorf, Volker A1 - Schartel, Bernhard A1 - Hennecke, Manfred T1 - Stability of poly(phenyl-1,4-phenylene vinylene) investigated by thermo- and chemilumineszenz T2 - Excited States, Photochemistry, and Application CY - Noordwijk, Netherlands DA - 1998-06-16 PY - 1998 AN - OPUS4-23144 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard A1 - Hinrichsen, G. T1 - The scanning force microscope as a tool for the detection of local mechanical properties within the interphase of fibre reinforced polymers N2 - Scanning force microscopy (SFM) has been used to assess the local mechanical properties of fibre-reinforced polymers. Using a sinusoidal displacement modulation (DM) and lock-in technique the method allows to characterize local viscoelastic properties with a high lateral resolution. The simultaneous measurement of the local electrical conductivity is proposed which facilitates the interpretation of the mechanical data. The investigation of cross-sections perpendicular to the axis of carbon fibres embedded in PPS delivers some information about the change in local stiffness within the interfacial region. As a first approach, assuming a single-exponential decrease in local stiffness along a radial line from fibre to polymer we find characteristic decay lengths which are distributed in a range between 20 and 80nm. Further, a modified DM-mode is proposed which is expected to provide a contrast enhancement of the signal which is related to local stiffness. This can be achieved by installing an additional feedback loop which keeps constant the amplitude of dynamic indentation (CDI-mode). KW - Polymer-matrix composites (PMC´s) KW - Interface/interphase KW - SFM/AFM KW - Surface properties KW - Nondestructive testing PY - 1998 DO - https://doi.org/10.1016/S1359-835X(98)00077-3 SN - 1359-835X VL - 29 SP - 1251 EP - 1259 PB - Elsevier CY - Oxford AN - OPUS4-1294 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Sturm, Heinz A1 - Munz, Martin T1 - Investigations of the mechanical behaviour of heterogeneous polymeric systems and fibre reinforced composites using micro indentation and scanning force microscopy T2 - Special Lectures, 18. Disc. Conf. And 56the PMM.: Mech. Behaviour of polymeric materials CY - Prague, Czech Republic DA - 1998-07-20 PY - 1998 AN - OPUS4-12092 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stephan, Ina A1 - Grinda, Manfred A1 - Rudolph, Dieter T1 - Comparison of different methods for assessing the performance of preservatives in the BAM fungus cellar test N2 - The fungus cellar test is a common means to get reliable data on the long term performance of treated wood in soil contact. A constantly high humidity and a suitable of water holding capacity for a range of micro-organisms provide high decay rates in untreated wood and produce intensive microbial pressures on wood treated with biocides. Presently a range of biocides are under test in the BAM fungus cellar and the results will be presented for the following types of biocides: Tebuconazole in combination with copper and boron (5 years fungus cellar), quats with copper and boron (5 years fungus cellar) and Cu-organic compound combined with copper and boron (3 years fungus cellar). Figures will be shown on the development of the Modulus of Elasticity (MOE) over the years and on an assessment of the stakes according to EN 252. T2 - 29th Annual Meeting of the International Research Group on Wood Preservation CY - Maastricht, Netherlands DA - 1998-06-14 KW - Fungus cellar KW - Soil contact KW - Triazoles KW - Cu-HDO KW - Quats KW - MOE PY - 1998 UR - http://www.irg-wp.com/irgdocs/details.aspx?id=08ae393d-c7db-419b-a0b5-dfeb2970d7ba SP - Paper IRG/WP 98-20149, 1-17 PB - International Research Group on Wood Preservation CY - Stockholm AN - OPUS4-4454 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sierra-Alvarez, R. A1 - Le Bayon, I. A1 - Carey, J. A1 - Stephan, Ina A1 - van Acker, J. A1 - Grinda, Manfred A1 - Kleist, G. A1 - Militz, H. A1 - Peek, R.-D. T1 - Laboratory Testing of Wood Natural Durability in Soil-Bed Assay T2 - 29th Annual Meeting of the International Research Group on Wood Preservation CY - Maastricht, Netherlands DA - 1998-06-14 KW - Wood KW - Fungal decay KW - Soft rot fungi KW - Natural durability KW - Test method KW - Soil exposure KW - Mass loss KW - Static bending PY - 1998 SP - Paper IRG/WP 98-20141, 1-15 PB - International Research Group on Wood Preservation CY - Stockholm AN - OPUS4-4453 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heyde, M. A1 - Sturm, Heinz A1 - Munz, Martin A1 - Rademann, K. T1 - Recipes for the Calibration of Piezos with a cheap and easy-to-use Fibre Optical Displacement Sensor T2 - Seminar on Quantitative Microscopy (QM '98), Dansk Institute for Fundamental Metrology CY - Kongens Lyngby, Denmark DA - 1998-11-05 PY - 1998 AN - OPUS4-6456 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - The Normal Force Modulation as a method for Studying the Interphase of Fibre Reinforced Polymer T2 - 24th Intern. TopoMetrix-Workshop: Aktuelle Entwicklungen in der Nanotechnologie und Rastersondenmikroskopie, Humboldt-Universität CY - Berlin, Germany DA - 1998-03-12 PY - 1998 AN - OPUS4-6457 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sturm, Heinz A1 - Munz, Martin A1 - Schulz, Eckhard T1 - Nanomechanics at the Carbon Fibre/PPS interface: A combined SFM study of Topography, AC Conductivity and Surface Stiffness T2 - 24th Intern. TopoMetrix-Workshop: Aktuelle Entwicklungen in der Nanotechnologie und der Rastersondenmikroskopie, Humboldt-Universität CY - Berlin, Germany DA - 1998-03-12 PY - 1998 AN - OPUS4-6458 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Sturm, Heinz A1 - Munz, Martin T1 - Investigation on mechanical behaviour of heterogeneous polymeric systems and fibre reinforced composites using micro indentation and scanning force microscopy T2 - 18th Disc. Conf. and 56th PMM CY - Prague, Czech Republic DA - 1998-07-20 PY - 1998 AN - OPUS4-6451 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sturm, Heinz A1 - Heyde, M. A1 - Munz, Martin A1 - Rademann, K. T1 - Physical properties of nanometer sized particles characterised by Scanning Probe Microscopy Techniques T2 - 2nd German Brazilian Workshop on Applied Surface Science CY - Templin, Germany DA - 1998-09-21 PY - 1998 AN - OPUS4-6454 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heyde, M. A1 - Sturm, Heinz A1 - Rademann, K. T1 - SPM Techniques to characterise Electrical Properties of Nanometer sized Particles T2 - Raster-Sonden-Mikroskopien und organische Materialien VII CY - Berlin, Germany DA - 1998-10-07 PY - 1998 AN - OPUS4-6455 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Eckhard A1 - Sturm, Heinz A1 - Munz, Martin T1 - Characterisation of heterogeneous polymeric systems using different SFM contrasts - harmonically modulated friction and nanoindentation T2 - ICEM-14 CY - Cancún, Mexico DA - 1998-08-30 PY - 1998 AN - OPUS4-6452 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sturm, Heinz T1 - Scanning Probe Microscopy Techniques for the Examination of Nanomechanics - a study of Topography, AC Conductivity and Surface Stiffness T2 - Raster-Sonden-Mikroskopien und organische Materialien VII CY - Berlin, Germany DA - 1998-10-08 PY - 1998 AN - OPUS4-6448 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sturm, Heinz A1 - Munz, Martin A1 - Schulz, Eckhard A1 - Hampe, Andreas T1 - Scanning Probe Microscopy Techniques for the Examination of Interface Nanomechanics T2 - ECOF 7, European Conference Thin Organised Films CY - Potsdam, Germany DA - 1998-09-14 PY - 1998 AN - OPUS4-6460 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - Wegvermittelte Normalkraftmodulation mit lokal angepasster Modulationsamplitude T2 - Digital Instruments User Meeting an der LMU CY - Munich, Germany DA - 1998-03-04 PY - 1998 AN - OPUS4-6450 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heyde, M. A1 - Sturm, Heinz A1 - Rademann, K. T1 - Scanning Probe Microscopy Techniques to characterise materials properties of nanometer sized particles T2 - SXM3 CY - Basel, Switzerland DA - 1998-09-14 PY - 1998 AN - OPUS4-6453 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -