TY - GEN A1 - Müller, Alexander A1 - Trappe, Volker A1 - Hickmann, Stefan A1 - Ortwein, H.-P ED - Christ, Hans-Jürgen T1 - Investigation of the infinite life of fibre-reinforced plastics using X-ray refraction topography for the in-situ, nondestructive evaluation of micro-structural degradation processes during cyclic fatigue loading N2 - The described investigation of carbon-fibre-reinforced plastics (CFRP) documents that damage evolution can be observed by means of X-ray refractography. Comparative investigations with synchrotron technique on CFRP and grey-scale analysis on glass fibre-reinforced-plastics (GFRP) confirm these results. Moreover it was found that the fracture mechanical properties of the matrix system influence damage nucleation and propagation in the laminate during static and fatigue loads. Single-step fatigue tests were carried out on Laminates with RIM135 and LY556 matrix systems made from non-crimped fabric (NCF) or twill weave in different fibre orientations. The damage to the LY556 laminates was characterized by laminate cracks growing rapidly over the whole specimen width, whereas the damage on the RIM135 laminates was characterized by an earlier onset of micro-cracking followed by laminate cracks. The specimens were fatigued up to 108 (very high cycle fatigue (VHCF) regime) load cycles. S-N-curves of damage initiation were drawn and boundaries were identified for endurance within the VHCF regime. A phenomenology based model focusing on matrix stress was applied to reproduce the first inter-fibre failure (IFF) under static and fatigue loads. KW - Carbon fibre-reinforced-plastics KW - Fatigue KW - Damage evolution KW - X-ray refractography KW - Very high cycle fatigue PY - 2018 SN - 978-3-658-24531-3 DO - https://doi.org/10.1007/978-3-658-24531-3 VL - 2018 SP - 417 EP - 439 PB - Springer Spektrum CY - Wiesbaden ET - 1. Auflage AN - OPUS4-50096 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Haas, Marko ED - Hirsch, B ED - Weber, J ED - Schäfer, F ED - Schmid, J T1 - Das Risikomanagementsystem in der Bundesanstalt für Materialforschung und -prüfung (BAM) N2 - Im Rahmen des Bandes Management von Risiken in Behörden beschreibt der Praxisbeitrag das Risikomanagementsystem der BAM. KW - Risiko KW - Risikomanagement KW - Controlling KW - Management KW - Steuerung PY - 2020 SN - 978-3-503-19150-5 SP - 90 EP - 100 PB - Erich Schmidt Verlag CY - Berlin AN - OPUS4-50915 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Holm, Olaf ED - Ludwig, C. ED - Matasci, C. ED - Edelmann, X. T1 - Recovery of metals from waste, an example for the resource cycle N2 - Bottom ash from municipal solid waste incineration (MSWI) consists of eiemental metals in considerable amounts. The fine fraction < 4 mm additionally contains chemically bound metals (oxides, carbonates, Silicates). Separation prospects with techniques as in ore processing (flotation, density separation, bioleaching, hydrothermal solution) are discussed. During alteration after wet extraction mineral material with hydraulic properties form coatings on almost all particles of the bottom ash and complicate separation procedures. ln addition bottom ash from MSWI is a heterogeneaus material. For sufficient enrichment different concerted treatment steps seemed to be essential associated with an uncertainty of economic viability. The utilisation of metal compounds present in bottom ash as secondary raw material depends on the energy- and resource-efficiency of the enrichment processes. Therefore energy and material flow considerations are presented. KW - Recyclable material KW - Recycling technology KW - Waste management PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-347572 UR - http://infoscience.epfl.ch/record/213010 SN - 978-3-9521409-6-3 SP - 289 EP - 293 AN - OPUS4-34757 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reddy, K. M. A1 - Kudalkar, V. N. A1 - Madhusudan, C. P. A1 - Wiggenhauser, Herbert T1 - A NDT in civil engineering software for multiple testing methods KW - Beton KW - Software KW - Zerstörungsfreie Prüfung PY - 2008 SN - 978-1-57117-180-1 SP - 295 EP - 302 CY - Oakland, CA, USA AN - OPUS4-34611 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nery de Araújo Neto, Gilberto T1 - O que é monitoracao na construcao civil? N2 - Quando se constrói uma estrutura, na maioria das vezes, não se sabe ao certo até quando esta será necessária, útil ou ainda, segura. No projeto utilizam-se características conhecidas dos materiais, como resistência à compressão, resistência a ataques químicos e a intempéries, além de expectativas de carregamento e condições de exposição em uso. Porém, as reais interações entre a estrutura e o ambiente no qual ela está inserida são difíceis de prever ou simular. Além do carregamento em uso, que pode variar de forma diferente do previsto (incremento de tráfego sobre uma ponte ou modificação de uso de um edifício, por exemplo), outra questão são as sobrecargas acidentais, como terremotos, inundações, etc. Todas estas incertezas fazem com que a uma previsão precisa da degradação da estrutura ao longo do tempo seja difícil (quase impossível). Para confirmar a segurança e a fidelidade da estrutura em relação ao projeto são feitas inspeções, que avaliam a degradação, a segurança e as condições gerais da estrutura. Podem-se citar como principais usos do monitoramento estrutural na engenharia civil: auxiliar as inspeções provendo ao especialista um histórico de degradação e comportamento que possibilita um melhor entendimento de possíveis problemas e a identificação de causas; certificar uma estrutura em relação à fidelidade ao projeto; avaliar a segurança de uma estrutura antiga ou num dado momento em que condições especiais se apresentem; e otimizar programas de manutenção. T2 - What is monitoring in construction? KW - Structural health monitoring KW - Sensors KW - Maintenance management PY - 2013 N1 - Serientitel: Monitoreo en la Construcción Civil – Series title: Monitoreo en la Construcción Civil VL - 5 SP - 1 EP - 16 AN - OPUS4-30382 LA - spa AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Yin, Huajie A1 - Madkour, Sherif Aly Hassan Aly A1 - Schönhals, Andreas ED - Kremer, F. T1 - Glass transition of ultra-thin polymer films: A combination of relaxation spectroscopy with surface analytics N2 - The glass transition behavior of ultra-thin supported polymer films is discussed controversially in the literature for around 20 years. Substantial efforts have been archived to understand it. In this contribution, a combination of methods sensitive to bulk properties of a system, like dielectric or specific heat spectroscopy with surface analytics, for instance, atomic force microscopy (AFM), contact angle measurements, and X-ray photoelectron spectroscopy (XPS) were employed to study the glass transition of ultra-thin supported films. All investigations were carried out on identically prepared and treated samples. Different systems with different complexities going from more or less flexible homopolymers over rigid main chain macromolecules to polymer blends have been studied. For the investigated flexible macromolecules, the dynamic glass transition temperature estimated within the frame of the linear response approach is independent of the film thickness down to several nanometers and identical to the bulk value. For polystyrene it was found the thermal glass transition temperatures can depend on the film thickness. This different behavior is not well understood till now and needs further experimental clarification. For the investigated main chain polymers polycarbonate and polysulfone. Dynamic and thermal glass transition temperature estimated from the dielectric measurements increases with decreasing film thickness. This is discussed in the frame of a strong interaction of the polymer segments with the surface of the substrate. In general for homopolymers, the interaction energy of the polymer segments with the substrate surface cannot be considered as the only parameter, which is responsible for the change in the thermal glass transition with the film thickness. For the investigated miscible blend system of polystyrene/poly(vinyl methyl ether) at a composition of 50/50 wt-% a decrease of the dynamic glass transition temperature with decreasing film thickness is found. This is explained by the formation of a poly(vinyl methyl ether)-rich surface layer with a higher molecular mobility. KW - Broadband dielectric spectroscopy KW - Specific heat spectroscopy KW - Photoelectron spectroscopy KW - Contact angle measurements KW - Polystyrene KW - Poly(vinyl methyl ether) KW - Poly(2-vinylpyridine) KW - Polycarbonate KW - Polysulfone KW - Polystyrene/ Poly(vinyl methyl ether) blend PY - 2014 SN - 978-3-319-06099-6 SN - 978-3-319-06100-9 DO - https://doi.org/10.1007/978-3-319-06100-9_2 SN - 2190-930X SN - 2190-9318 SP - 17 EP - 59 PB - Springer AN - OPUS4-31078 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Gerhard Wilhelm ED - Erismann, Theodor H. T1 - Technik und Kunst PY - 1982 SP - 7 EP - 22 CY - Dübendorf AN - OPUS4-35983 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brückner, Udo A1 - Schuler, Werner A1 - Walter, Helmut T1 - Untersuchungen zum Eigenspanungszustand beim induktiven Randschichthärten PY - 1983 SN - 3-88355-075-2 N1 - Vortragstexte eines Symposiums VL - 1 SP - 293 EP - 308 CY - Oberursel, Germany AN - OPUS4-36038 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brocks, Wolfgang ED - Diekkämper, R. ED - Niemann, H.-J. T1 - Zur numerischen Ermittlung des Spannungsintensitätsfaktors in der linear elastischen Bruchmechanik PY - 1982 SP - 88 EP - 102 PB - Müller CY - Köln-Braunsfeld AN - OPUS4-36010 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Droste, Bernhard A1 - Blümel, Peter ED - Busch, H. J. T1 - Die Verträglichkeit von Füllgut und Wandungswerkstoff - Eine wesentliche Voraussetzung der Genehmigung von Lager- und Transportbehältern für gefährliche Stoffe - Teil 1 PY - 1981 SP - B 58 a EP - B 58 l PB - Bundesanzeiger Verl.ges. CY - Köln AN - OPUS4-36017 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Droste, Bernhard A1 - Blümel, Peter ED - Busch, H. J. T1 - Die Verträglichkeit von Füllgut und Wandungswerkstoff - Eine wesentliche Voraussetzung der Genehmigung von Lager- und Transportbehältern für gefährliche Stoffe - Teil 2 PY - 1981 SP - B 58 p EP - B 58 w PB - Bundesanzeiger Verl.ges. CY - Köln AN - OPUS4-36018 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habig, Karl-Heinz ED - Kunst, H. T1 - Grundlagen des Verschleißes von Werkstoffen und Richtlinien zur Bearbeitung von Verschleißfällen PY - 1982 SN - 3-88508-805-3 N1 - Schriftenreihe: Kontakt und Studium; 99 SP - 15 EP - 32 PB - Expert-Verl. CY - Grafenau AN - OPUS4-36311 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habig, Karl-Heinz ED - Kunst, H. T1 - Möglichkeiten der Verschleißprüfung in Betrieb und Labor PY - 1982 SN - 3-88508-805-3 N1 - Schriftenreihe: Kontakt und Studium; 99 SP - 171 EP - 185 PB - Expert-Verl. CY - Grafenau AN - OPUS4-36313 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - di Matteo, G. A1 - Staude, Andreas A1 - Kuhn, R. A1 - Hertel, I. A1 - Seyfried, F. A1 - Reiche, I. ED - Reiche, I. T1 - Investigation of Ancient Egyptian Metallic Artefacts by Means of Micro-Computed Tomography N2 - In this paper we present the results of imaging studies of ancient Egyptian metallic artifacts using micro-Computed Tomography (micro-CT). Micro-CT is a non-destructive imaging method with high spatial resolution, which enables the examination of the internal structure of objects. It is thus especially suitable for the investigation of cultural heritage and archaeological findings, when it is not possible to sample or difficult to manipulate the object. Using specialized software for 3D visualization and segmentation, data sets of two objects were analyzed. We gained a clear view of the inner structure of a metallic archaeological artifact from the necropolis of Abusir el-Meleq, which is believed to be very ancient in the Egyptian archaeological context (from the Predynastic Era), and were able to distinguish its different omponents under the thick layers of external concretions. These components give hints about the production technology of the object. We also investigated the contents of a closed metal box found near Abusir dated to the Late/Greco-Roman Period. The identified Content corresponds either to sediments or to mineral remains of the original content of the box. Both artifacts are from excavations conducted in Egypt and are part of the archeological collection of the Ägyptisches Museum und Papyrussammlung in Berlin. KW - Computertomographie KW - computed tomography KW - Archäologie KW - archaeology KW - Metall KW - metal PY - 2015 SN - 0344-5089 VL - 23 SP - 79 EP - 84 CY - Berlin AN - OPUS4-35432 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Myrach, Philipp A1 - Meinhardt, J. A1 - Kalisch, U. A1 - Hennen, C. A1 - Mecke, R. A1 - Seidl, T. A1 - Schiller, M. ED - Toniolo, L. ED - Boriani, M. ED - Guidi, G. T1 - Monitoring of cracks in historic concrete structures using optical, thermal and acoustical methods N2 - Cracks are a major issue in the field of cultural heritage. In order to evaluate the significance of a crack, a long term monitoring of the damaged region is required. However, there is a lack of easy to operate tools for such monitoring measures. Therefore, new or existing methods for other applications have to be optimised for cultural heritage investigation. The paper describes the application of such crack observation methods on a historic concrete sculpture. Beside conventional methods, like mapping by hand and ultrasonic depth profiling, a novel tracking system is presented. Furthermore, the suitability of active thermography for the investigation of cracks was investigated. The results show promising prospects for these non-destructive techniques. KW - Crack monitoring KW - Concrete KW - Thermography KW - Crack mapping PY - 2015 SN - 978-3-319-08532-6 SN - 978-3-319-08533-3 DO - https://doi.org/10.1007/978-3-319-08533-3 SN - 2198-7300 SN - 2198-7319 SP - Part II, 93 EP - 102 PB - Springer AN - OPUS4-33851 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Gerhard Wilhelm T1 - Werkstoffe, Material- und Werkstoffprüfung PY - 1985 SN - 3-478-53200-0 VL - 10 PB - Verl. Moderne Industrie CY - München AN - OPUS4-33884 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Struck, Werner ED - Jacoby, G. T1 - Stoßartige Belastungen von Stahlbetonbauteilen PY - 1981 SP - 101 EP - 113 PB - Werkstofftechn. Verl.-Ges. CY - Karlsruhe AN - OPUS4-33986 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lützow, Wolfgang A1 - Pastuska, Gerhard ED - Seng, H. J. T1 - Prüfung von Kunststoffen auf ihre Langzeiteigenschaften nach wiederholter Verarbeitung PY - 1982 SN - 3-88508-744-8 N1 - Serientitel: Kontakt & Studium – Series title: Kontakt & Studium IS - 87 SP - 28 EP - 38 PB - Expert-Verl. CY - Grafenau AN - OPUS4-33948 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wüstenberg, Hermann A1 - Erhard, Anton ED - Dorn, L. T1 - Neuere Ultraschallprüfverfahren für die Fehlerklassierung und -analyse and Schweißnähten PY - 1985 SN - 3-88508-962-9 N1 - Serientitel: Kontakt & Studium – Series title: Kontakt & Studium IS - 145 SP - 136 EP - 158 PB - Expert-Verl. CY - Sindelfingen AN - OPUS4-34234 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Goebbels, Jürgen A1 - Heidt, Heinrich A1 - Kettschau, Arnold A1 - Reimers, Peter ED - Born, H. T1 - Fortgeschrittene Durchstrahlungstechniken zur Dokumentation antiker Bronzen PY - 1985 SN - 3496010290 SN - 9783496010296 SP - 126 EP - 131 PB - D. Reimer CY - Berlin AN - OPUS4-34241 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neumann, Eberhard ED - Dorn, L. T1 - Über den Stand der Entwicklung von Ultraschallprüfverfahren für grobkörnige austenitische Werkstoffe PY - 1985 SN - 3-88508-962-9 N1 - Serientitel: Kontakt & Studium – Series title: Kontakt & Studium IS - 145 SP - 159 EP - 199 PB - Expert-Verl. CY - Sindelfingen AN - OPUS4-34224 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian ED - Gutowski, W. ED - Dodiuk, H. T1 - Study of metal-polymer interfaces: Relevance to adhesion KW - Polymer surface modification KW - Adhesion KW - Spacer PY - 2013 SN - 978-90-04-20173-6 SN - 978-90-04-20174-3 SP - 3 EP - 33 PB - CRC Press AN - OPUS4-30576 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neider, Rudolf ED - Stollenz, E. ED - Consentius, K. T1 - Anwendung ionisierender Strahlen in der Industrie unter Beachtung der Strahlenschutzvorschriften PY - 1982 SP - 193 EP - 194 PB - H. Hoffmann CY - Berlin AN - OPUS4-36421 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Preß, Henning ED - Dorn, L. T1 - Meßtechnische Erfassung der entstehenden Mengen und Konzentrationen an schädlichen Gasen und Rauchen PY - 1982 SN - 3-88508-808-8 N1 - Schriftenreihe: Kontakt & Studium; 92 SP - 79 EP - 98 PB - Expert-Verl. CY - Grafenau AN - OPUS4-36475 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Preß, Henning ED - Dorn, L. T1 - Schadstoffentstehung beim autogenen Schweißen und Schneiden PY - 1982 SN - 3-88508-808-8 N1 - Schriftenreihe: Kontakt & Studium; 92 SP - 99 EP - 108 PB - Expert-Verl. CY - Grafenau AN - OPUS4-36478 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Preß, Henning ED - Dorn, L. T1 - Schadstoffentstehung beim Lichtbogenschweißen und Plasmaschneiden PY - 1982 SN - 3-88508-808-8 N1 - Schriftenreihe: Kontakt & Studium; 92 SP - 109 EP - 124 PB - Expert-Verl. CY - Grafenau AN - OPUS4-36480 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Colini, Claudia ED - Michel, C. ED - Friedrich, M. T1 - La invencíon del Sacromonte: How and Why Scholars Debated about the Lead Books of Granada for Two Hundred Years N2 - At the end of the sixteenth century, a number of relics and artefacts were discovered in Granada, Spain. They included what became known as the Lead Books of the Sacromonte, twenty-one written artefacts made of circular lead leaves engraved in archaic Arabic characters. The authorship was attributed to some Arab disciples of St James the Greater considered to be the first evangelisers of the Iberian Peninsula. The texts, the materiality and the circumstances of the discoveries fuelled a debate surrounding their authenticity that lasted more than two centuries, a debate so fierce and controversial that not even papal condemnation in 1682 was able to stop it. Soon after the discoveries were made public, scholars highlighted the many contradictions and errors of a historical, linguistic and theological nature present in the texts, identifying members of the local Morisco community as possible forgers. This article focuses on how the scholarly community of the sixteenth and seventeenth centuries handled these findings and looks at the methods employed by the scholars to evaluate the authenticity of the artefacts. It will also look at how the particular interests of the various authorities involved influenced the acceptance or dismissal of relevant academic results. KW - Forgery KW - Moriscos KW - Parchment KW - Lead books PY - 2020 UR - https://www.degruyter.com/view/title/590832 DO - https://doi.org/10.1515/9783110714333-011 VL - Studies in Manuscript Cultures 20 SP - 209 EP - 262 PB - De Gruyter CY - Berlin/Boston AN - OPUS4-51936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - He, Shulin A1 - Johnston, P. R. A1 - McMahon, Dino Peter ED - Sandrelli, F. ED - Tettamanti, G. T1 - Analyzing Immunity in Non-model insects Using De Novo Transcriptomics N2 - With the advent of widely accessible and cost-effective next-generation sequencing technologies, it has become increasingly feasible to study insect immunity on a deep genomic or transcriptomic level. Here we introduce a protocol that is aimed at exploiting transcriptomic data to study immunity in non-model insect organisms. We provide instructions for an entire workflow, starting with successfiil extraction of insect RNA through to bioinformatic guidelines for the effective analysis of mRNA sequencing data. The RNA extraction procedure is based on TRIzol Reagent and a spin-column clean-up Step. The bioinformatic pipeline is intended to help users identify immune genes from de novo transcriptome data and includes guidelines for conducting differential gene expression analyses on transcriptomic data. The immune gene prediction method is based on inferring protein homologs with HMMERand Blastp and talces Advantage ofthe ImmunoDB database, which is a valuable resource for research on insect immune-related genes and gene families. The differential gene expression analysis procedure utilizes the DESeq2 package as imple� mented in R. We hope this protocol will serve as a usefi.il resource for researchers aiming to study immunity in non-model insect species. KW - RNA extraction KW - mRNA-seq KW - ImmunoDB KW - Immune gene prediction KW - Differential gene expression analysis KW - De novo assembly PY - 2020 DO - https://doi.org/10.1007/978-1-0716-0259-1_2 VL - 2020 SP - 35 EP - 49 PB - Springer Science+Business Media CY - Luxemburg AN - OPUS4-53888 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lohrer, Christian A1 - Dudek, Gabriele T1 - Kalte Pyrotechnik - ein heißes Thema N2 - Beschreibung der Eigenschaften von vermeintlich kalter Pyrotechnik und die Gefährdungen bei der Verwendung. Beitrag ist als VS-NfD (Verschlusssache - Nur für den Dienstgebrauch) eingestuft. KW - Aerosole KW - Pyrotechnik KW - Nitrocellulose PY - 2021 SP - 32 EP - 38 PB - Bundeskriminalamt (BKA) CY - Wiesbaden AN - OPUS4-52400 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz ED - Degrande, G. ED - al., et T1 - Predicted and measured amplitude-speed relations of railway ground vibrations at four German sites with different test trains N2 - The present contribution evaluates four measuring series made by the Federal Institute of Material Research and Testing for the relations between train speed and ground vibration amplitudes. This experimental evaluation is supported by the simulation of the train passages at the different sites by using appropriate excitation mechanisms and forces as well as layered soil models which have been derived from impact measurements at each site. KW - Train speed KW - Ground vibration KW - Excitation forces KW - Layered soils PY - 2021 SN - 978-3-030-70288-5 DO - https://doi.org/10.1007/978-3-030-70289-2_43 SN - 1612-2909 VL - 150 SP - 411 EP - 419 PB - Springer Nature Switzerland AG CY - Cham AN - OPUS4-52611 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, R. A1 - Brechbühl, Y. A1 - Lutzenberger, S. A1 - Said, Samir A1 - Auersch, Lutz A1 - Guigou-Carter, C. A1 - Villot, M. A1 - Müller, R. ED - Degrande, G. ED - al., et T1 - Vibration Excitation at Turnouts, Mechanism, Measurements and Mitigation Measures N2 - There is a strong need for cost-effective mitigation measures for turnouts. SBB has initiated a series of examinations using different methodologies to gain a deeper understanding of the excitation mechanisms at low frequencies, in addition to that obtained in the RIVAS project. To date it is not yet clear what constitutes a complete measurement data set that would enable understanding most of the vibration excitation mechanisms in turnouts. Increasing vibration at turnouts in comparison to normal track is observed for all measured frequencies. The different methodologies are presented in the paper. Under-sleeper pads (USP) are a cost-effective method to reduce vibration at frequencies above 63 Hz (1/3 octave), but there is probably no improvement for frequencies below 63 Hz. A first test of new frog geometry did not show relevant improvements in Vibration emission in comparison to a reference frog geometry. Axle box acceleration measurements are an interesting method to identify defects in a turnout. A specialized measurement system of rail roughness could identify certain geometry Problem areas for some frogs. Noise increases also are observed at turnouts for frequencies ranging between 80 to 1000 Hz. The use of railway source models to calculate contact forces for ballasted track and turnouts seems promising, in particular for understanding the influence of ground. KW - Turnout KW - Switch KW - Vibration excitation KW - Vibration measurements PY - 2021 SN - 978-3-030-70288-5 DO - https://doi.org/10.1007/978-3-030-70289-2_42 SN - 1612-2909 VL - 150 SP - 403 EP - 410 PB - Springer Nature Switzerland AG CY - Cham AN - OPUS4-52612 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Abis, M. A1 - Bruno, M. A1 - Simon, Franz-Georg A1 - Grönhom, R. A1 - Kuchta, K. A1 - Fiore, S. ED - Medici, F. T1 - A Novel Dry Treatment for Municipal Solid Waste Incineration Bottom Ash for the Reduction of Salts and Potential Toxic Elements N2 - The main obstacle to bottom ash (BA) being used as a recycling aggregate is the content of salts and potential toxic elements (PTEs), concentrated in a layer that coats BA particles. This work presents a dry treatment for the removal of salts and PTEs from BA particles. Two pilotscale abrasion units (with/without the removal of the fine particles) were fed with different BA samples. The performance of the abrasion tests was assessed through the analyses of particle size and moisture, and that of the column leaching tests at solid-to-liquid ratios between 0.3 and 4. The results were: the particle-size distribution of the treated materials was homogeneous (25 wt % had dimensions <6.3 mm) and their moisture halved, as well as the electrical conductivity of the leachates. A significant decrease was observed in the leachates of the treated BA for sulphates (44%), chlorides (26%), and PTEs (53% Cr, 60% Cu and 8% Mo). The statistical analysis revealed good correlations between chloride and sulphate concentrations in the leachates with Ba, Cu, Mo, and Sr, illustrating the consistent behavior of the major and minor components of the layer surrounding BA particles. In conclusion, the tested process could be considered as promising for the improvement of BA valorization. KW - Bottom ash KW - Dry treatment KW - Municipal solid waste PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-552161 SN - 978-3-0365-3063-5 DO - https://doi.org/10.3390/ma14113133 SP - 57 EP - 71 PB - MDPI CY - Basel AN - OPUS4-55216 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilrich, Cordula A1 - Schröder, Volkmar A1 - Brandes, E. A1 - Schmidt, Martin A1 - Wandrey, Peter-Andreas A1 - Mix, K.-H. A1 - Wehrstedt, Klaus-Dieter A1 - Bender, H. A1 - Stephan, U. A1 - Eberz, A. A1 - Steinbach, J. A1 - Stoessel, F. T1 - Plant and process safety - 2. Hazardous materials and process conditions N2 - "Ullmann's Encyclopedia of Industrial Chemistry" is the benchmark reference in chemistry and chemical and life science engineering, covering inorganic and organic chemicals, advanced materials, pharmaceuticals, polymers and plastics, metals and alloys, biotechnology and biotechnological products, food chemistry, process engineering and unit operations, analytical methods, environmental protection, and much more. The present article is part of the topic collection "Environmental Protection and Industrial Safety". It covers plant and process safety, focusing on hazardous materials and process conditions. KW - Flammable gases and vapors KW - Combustibility of liquids KW - Dust explosions KW - Explosive condensed substances KW - Harmful effects of substances KW - Exothermic and pressure-inducing chemical reactions PY - 2012 SN - 978-3-527-30673-2 DO - https://doi.org/10.1002/14356007.q20_q01 SP - 1 EP - 50 PB - Wiley-VCH CY - Weinheim AN - OPUS4-58108 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Scholz, Philipp A1 - Gleis, Markus ED - Thiel, Stephanie ED - Thome-Kozminesky, Elisabeth ED - Quicker, Pater ED - Gosten, Alexander ED - Stengler, Ella T1 - Einstufung von Aschen und Schlacken aus der Abfallverbrennung im Hinblick auf die weitere Verwertung N2 - There are two mirror entries in the European Waste Catalogue for bottom ash and slag from waste incineration: 19 01 11* and 19 01 12. Entry 19 01 11* describes a waste material containing hazardous substances. It was shown that only the hazardous property HP14 (ecotoxic) is of relevance for the classification. If substances with the hazard statement code (HSC) H400, H410, H411, H412 and H413 are present in incineration bottom ash (IBA) above certain level the waste is classified as hazardous, otherwise it is non-hazardous (in this case 19 01 12). It was further shown that only Cu, Zn and Pb compounds have an impact on the classification using a summation rule: 100xΣ c(H410) + 10xΣ c(H411) + Σ c(H412). Limit value is 25 percent. It is obvious that H410 substances have the highest impact. Therefore, the knowledge of the elemental composition of IBA is not sufficient because the content of distinct chemical compounds (with the respective molecular weight) is needed. When the exact speciation is not known a worst-case approach has to be applied. A practical guideline for the estimation of HP14 was developed based on the definition of 4 substance groups: 1. Metals and alloys, 2. Water-soluble substances, 3. Oxides and carbonates and 4. Substances not soluble in weak acids. In substance group 1 only fine Zn powder has the HSC H410. Water-soluble substances are assumed to be H410 substances. Their concentrations are, however, regularly below the cut-off value of 0.1 %. The amount of substance group 3 is estimated by a selective extraction with maleic acid. According to the worst-case approach it is assumed that CuCO3xCu(OH)2 and ZnO represent the respective Cu and Zn species in IBA because these substances have the highest stochiometric factor. Even with this worst-case approach results from operators of IBA treatment plant showed that the limit value of 25 % is not exceeded. The requirements for utilization of IBA in Germany are defined in the Secondary Building Materials Decree (Ersatzbaustoffverordnung EBV) which was set into force in August 2023. Leaching methods (batch test or column test) with a liquid-to-solid ratio of 2 l/kg are applied. IBA fulfills the requirements for class HMVA-2. Actually, even a classification of IBA as hazardous (i.e 19 01 11*) would not affect utilization but handling and transport. KW - Rostasche KW - Ökotoxizität KW - Ersatzbaustoffverordnung KW - XANES-Spektroskopie PY - 2024 SN - 978-3-944310-90-9 VL - 1 SP - 402 EP - 414 PB - TK-Verlag CY - Neuruppin ET - 1 AN - OPUS4-59465 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Martin T1 - Selbstentzündungsverhalten von Biokohlen - Gefahrguteinstufung immer sicher? N2 - Mit der Abkehr von der Nutzung fossiler Rohstoffe rücken regenerative Energieträger immer weiter in den Focus. Neben klassischen Holzkohlen werden verstärkt so genannte Biokohlen produziert. Dieser Begriff findet Verwendung für mit Hilfe verschiedener Verfahren karbonisierte pflanzliche, tierische oder mikrobielle Ausgangsstoffe. Diese Kohlen werden zum Teil über weite Strecken zum Bestimmungsort transportiert (Überseetransporte) oder vor Verwendung für längere Zeit gelagert. Häufig zeigen diese Kohlen ein kritisches Selbstentzündungsverhalten, wobei Einstufungstests (UN N.4 Test) versagen können. Ein negatives Testergebnis des UN N.4 Tests führte dabei in der Vergangenheit zur Nichteinstufung als selbsterhitzungsfähiger Stoff; in der Praxis entzündeten sich aber bereits vergleichsweise kleine Schüttungen (einige m³), z. B. beim Seetransport in Containern. Der Artikel geht auf dieses Problem ein, stellt Prüfverfahren vor und gibt Empfehlungen für sicheren Transport und Lagerung. KW - Biokohlen KW - Selbstentzündung KW - Gefahrguteinstufung PY - 2023 SN - 978-3-18-092424-3 SN - 978-3-18-092424-9 SN - 0083-5560 SP - 143 EP - 153 PB - VDI Verlag GmbH CY - Düsseldorf AN - OPUS4-59598 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiederholt, Wilhelm ED - Rabald, E. ED - Behrens, D. T1 - Metallüberzüge (Allgemein) N2 - In der Technik müssen Werkstoffe vielfach aus Gründen der Wirtschaftlichkeit und ihrer mechanischen bzw. sonstigen speziellen Eigenschaften eingesetzt werden, obwohl sie den chemischen Beanspruchungen nicht gewachsen sind. Will und kann man unter derartigen Bedingungen auf ihren Einsatz nicht verzichten, so bietet sich die Möglichkeit, die chemischen Beanspruchungen auf den Werkstoff dadurch auszuschalten, daß der Werkstoff von seiner Umgebung durch Schutzschichten, Überzüge, Folien, dickere Beläge oder dgl. vollständig und dauernd abgeschirmt wird. Diese Trennung muß in jedem Falle so gut und vollständig sein, daß das angreifende Mittel nicht mehr an den Grundwerkstoff gelangen kann. Die Abwehr gegen den chemischen Angriff übernimmt dann 100%ig die Abschirmung. KW - Metallüberzug KW - Schutzschicht KW - chemische Beanspruchung PY - 1968 VL - DWT-Werkstoff-Gruppe 99, Met.., Dezember 1968 SP - 1 EP - 14 PB - DECHEMA CY - Frankfurt a.M. AN - OPUS4-60293 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiederholt, Wilhelm ED - Rabald, E. ED - Behrens, D. T1 - Metallüberzüge: Cr N2 - Chrom ist ein verhältnismäßig hartes, sprödes Metall mit einem hohen Schmelzpunkt. Durch diese Eigenschaften werden die Herstellungsmöglichkeiten der Überzüge dieses Metalles in der Weise eingeschränkt, daß im technischen Maßstabe Chrom auf anderen metallischen Werkstoffen nur aus wäßrigen Lösungen oder bei höheren Temperaturen aus Chromverbindungen über die Gasphase abgeschieden werden kann. Aus den genannten Gründen kommen Überzüge nur in geringen Dicken in Betracht, da sie andernfalls vom Untergrund abplatzen würden. Die Chromüberzüge zeichnen sich je nach den Herstellungsbedingungen durch blankes bzw. hochglänzendes Aussehen, eine gute Korrosionsbeständigkeit gegen zahlreiche angreifende Mittel, durch ihre fettabweisende Wirkung, durch hohe Härte und durch gute Widerstandsfähigkeit gegen gleitende bzw. reibende Beanspruchungen aus. Je nach den gewünschten Eigenschaften wird man das Verfahren als dekorative bzw. Glanzverchromung, Hartverchromung oder Schwarzverchromug auf elektrolytischem Wege oder als Diffusionsverchromung durchführen. KW - Chromüberzug KW - Schutzschicht KW - chemische Beanspruchung PY - 1968 VL - DWT-Werkstoff-Gruppe 14, Met.., Dezember 1968 SP - 1 EP - 3 PB - DECHEMA CY - Frankfurt a.M. AN - OPUS4-60296 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiederholt, Wilhelm ED - Rabald, E. ED - Behrens, D. T1 - Metallüberzüge: Ni N2 - Die gute Korrosionsbeständigkeit von Nickel gegen die Atmosphäre, Alkalien u. dgl. sowie seine speziellen mechanischen Eigenschaften - vor allem gute Temperaturbeständigkeit, genügende Härte und Verschleißfestigkeit - wird auch in Form von Überzügen zum Schutz von mechanisch und chemisch weniger widerstandsfähigen Metallen ausgenutzt. Die Überzüge können durch fremdstromlose, elektrolytische, Diffusions-, Spritz-, Vakuumaufdampf-, Plattier- und Aufschweißverfahren hergestellt werden. Je nach den gewählten Verfahren und den jeweiligen Arbeitsbedingungen erhält man Überzüge mit speziellen Eigenschaften, so daß je nach den Beanspruchungsbedingungen Überzüge mit den jeweils zweckentsprechenden Eigenschaften hergestellt werden können. Bei der Auswahl der Verfahren sind neben den Kosten allerdings u. a. auch Art und Form der zu überziehenden Werkstoffe und Werkstücke zu berücksichtigen. KW - Nickelüberzug KW - Schutzschicht KW - chemische Beanspruchung PY - 1968 VL - DWT-Werkstoff-Gruppe 39, Met.., Dezember 1968 SP - 1 EP - 8 PB - DECHEMA CY - Frankfurt a.M. AN - OPUS4-60297 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nolze, Gert ED - Sen Gupta, S. P. ED - Chatterjee, P. T1 - PowderCell : a mixture between crystal structure visualizer, simulation and refinement tool N2 - The program PowderCell is a crystallographic tool for visualization of Crystal structures. However, it offers also non-conventional features like the fulautomatical generation of subgroups or the consideration of non-standard settings of space-group types. On the one Hand the program is very useful for non-crystallographers who like to get an impression of the atomic arrangement within the unit cell. But also for crystallographers it is recommendable because it contains a lot of additional information which can be extracted and used like data given in the International Tables for Crystallography, Vol. A. However, the most important advantage of the program is the simultaneous calculation of the X-ray or neutron diffraction powder patterns for a mixture of up to 10 crystalline phases. Between more than 7 different characteristic radiations can be chosen and their influence on the resulting powder pattern can be studied. Furthermore, experimental diffractograms can be analysed using a refinement procedure. The implemented LeBail-algorithm allows the investigation of unknown phases. In combination with the refinement algorithm an interface to Shelx offers the possibility for a step by step ab initio structure analysis. Certainly, the user-friendly shell is one reason that especially users who are not so familar with space-group symmetry, crystal structure data or diffractometry use this powerful tool for the solution of scientific or analytical problems as well as in teaching. KW - XRD KW - Simulation KW - Crystal structure KW - Neutron diffraction PY - 2002 SN - 8177642626 SN - 9788177642629 SP - 146 EP - 155 PB - Allied Publishers CY - Kolkata, India AN - OPUS4-38035 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nolze, Gert ED - Sen Gupta, S. P. ED - Chatterjee, P. T1 - The determination of residual stress N2 - X-ray stress analysis on crystalline materials is based on the determination of elastic lattice strains. The strains described by the shift of peak positions are converted to stresses by the means of theory of elasticity. The development of the sin2ψ-method of X-ray stress analysis introduced an enormous progress in X-ray stress analysis during the last decades. This report outlines some important elements of X-ray physics and fundamentals of theory of elasticity. The Standard measuring procedure are described and special experimental differences to the common powder diffractometry are outlined. KW - XRD KW - Residual stress PY - 2002 SN - 81-7764-262-6 SN - 9788177642629 SP - 77 EP - 83 PB - Allied Publishers CY - Kolkata, India AN - OPUS4-38036 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brandes, Klaus T1 - Niedrigzyklisches Versagen von Stahlträgern unter Erdbebenbeanspruchung PY - 1984 N1 - Technisch-wissenschaftliche Mitteilungen / Inst. für Konstruktiven Ingenieurbau, Ruhr-Univ. Bochum; 84-3 SP - 186 EP - 199 CY - Bochum AN - OPUS4-36819 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stichel, Wolfgang T1 - Korrosion in Heizkörpern PY - 1983 N1 - Kolloquium: Fragen der Fernheizwasseraufbereitung und Korrosionen in Fernwärmesystemen SP - 1 EP - 16 CY - Frankfurt am Main AN - OPUS4-36770 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helms, Rolf A1 - Naseband, Klaus ED - Nonnemann, H. C. ED - Havemann, D. T1 - Ingeniuerwissenschaftliche Grundlagen der intramedullären Osteosynthese PY - 1984 SN - 9783136572016 SP - 7 EP - 19 PB - Georg Thieme Verlag CY - Stuttgart ; New York AN - OPUS4-36748 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Quercetti, Thomas A1 - Müller, Karsten A1 - Johnson, Mark A1 - Tait, Trevor A1 - Tso, Chi-Fung A1 - Izatt, Conrad ED - ASME, T1 - Drop testing of a container for the storage. transport and disposal of intermediate level waste N2 - Impact tests were performed, as part of a corresponding container’s substantiation, during design development of a shielded container. The container will be used for storage, transport, and disposal of intermediate level waste in the UK. The mechanical test program comprised a 9m free drop test onto an unyielding target in a container long lid edge down orientation at ambient conditions. Further, a 0,5m free drop test onto a punch target was performed. Here, the container was orientated with the lid downwards in a way that the punch, a mild steel bar, impacts a filter lid. The test specimen was instrumented with strain gauges and accelerometers for the drop tests. Transient strains at selected points of the inner and outer container walls, at the shielding lid, as well as at the lid bolts were measured during the container’s impact. Furthermore, decelerations of the container body, container lid, and the skip were measured. The complex geometrical changes of the container due to impact were determined by optical 3d- deformation measures using the projected fringes method in combination with multi-image photogrammetry. This paper summarizes the performance of the drop tests and various drop test results in context with the design development as well as aspects regarding the associated Finite Element (FE) analyses and post-test evaluation. KW - Drop testing KW - Container KW - Intermediate level waste PY - 2017 SN - 978-0-7918-5802-8 VL - 7 SP - Article UNSP V007T07A036, 1 EP - 7 CY - New York AN - OPUS4-44047 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rohn, H. A1 - Simon, Franz-Georg A1 - Schmidt, M. A1 - Giegrich, J. A1 - Oberender, C. A1 - Denz, W. A1 - Niebaum, A. ED - Ludwig, C. ED - Matasci, C. T1 - The Guideline Series VDI 4800 Resource Efficiency: An Approach for Increasing Resource Efficiency with Aim of Conservation of Natural Resources in the Industrial Sector N2 - In 2011, the Association of German Engineers (VDI) started working on a set of guidelines towards increased resource efficiency. These guidelines represent a framework that defines resource efficiency and outlines considerations for the producing industry. A special guideline for SMEs is included as well as guidelines on methodologies for evaluating resource use indicators, such as the cumulative raw material demand of products and production systems. Resource efficiency, defined here as the relationship between a specific benefit or use and the natural resources that need to be spent or consumed to attain this benefit or use. It can be evaluated by defining a function which expresses the specific benefit and quantifies the resource requirements through a set of indicators (use of raw materials, energy, water, land and ecosystem services including sinks). The results from this also depend on the system boundary parameters and the allocation rules for by-products and waste treatment options. Optimising resource use is possible at all stages of a product’s or production system’s life cycle chain (raw material extraction, production and manufacturing, use and consumption, and the end-of-life stage). VDI guidelines are widely accepted across Germany’s industrial sector and therefore represent an important means of mainstreaming resource efficiency in this target area. As well as providing a methodological framework, the guidelines describe strategies and measures towards increasing resource efficiency, and they enable industrial producers and service providers to identify potential areas of improvement. The full article presents an overview of the methodology and contents of these guidelines and discusses their impact in achieving absolute reductions in the industrial use of natural resources. KW - Resource efficiency KW - Life cycle thinking KW - Products and production systems KW - Standardization PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-426443 UR - https://www.wrforum.org/wrfpublicationspdf/boosting-resource-productivity/ SN - 978-3-9521409-7-0 SP - 125 EP - 132 PB - Paul Scherrer Institute CY - Villigen PSI, Switzerland ET - 1 AN - OPUS4-42644 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilsch, Gerd T1 - Fast Quantitative Chemical Analysis of Cencrete using LIBS N2 - Non-destructive testing of concrete based on laser induced breakdown spectroscopy in civil engineering. KW - LIBS KW - Concrete KW - Chloride PY - 2017 SP - 289 EP - 325 CY - Berlin, Germany AN - OPUS4-42648 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Haas, Marko ED - Hirsch, B. ED - Weber, J. ED - Schäfer, F.-S. T1 - Ansätze und Herausforderungen bei der Steuerung einer Ressortforschungseinrichtung am Beispiel der Bundesanstalt für Materialforschung und -prüfung (BAM) N2 - Der Beitrag beleuchtet im Rahmen des Schwerpunktthemas "Kennzahlen als Mess- und Steuerungsinstrument in Behörden" des Arbeitskreises Steuerung & Controlling in öffentlichen Institutionen die spezifischen Aspekte der Steuerung einer Ressortforschungseinrichtung. Dabei wird am Beispiel der Bundesanstalt für Materialforschung und -prüfung das derzeit vorhandene Ziel- und Steuerungssystem dargestellt. Ausgehend vom Spannungsfeld zwischen wissenschaftlicher Freiheit und Notwendigkeit der Steuerung einer öffentlichen Einrichtung wird die Ableitung von der dreijährigen strategischen Zielvereinbarung mit dem BMWi hin zu den operativen jährlichen Abteilungszielvereinbarungen beschrieben. Zusammenfassend werden die Herausforderungen der Steuerung einer Forschungseinrichtung diskutiert. KW - Controlling KW - Steuerung KW - Zielvereinbarung KW - Ressortforschung KW - Kennzahlen KW - Ergebnisse PY - 2018 SN - 978-3-503-17745-5 SP - 49 EP - 57 PB - Erich Schmidt Verlag CY - Berlin AN - OPUS4-45332 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst A1 - Woydt, Mathias ED - Totten, George E. T1 - Introduction to tribology and tribological parameters N2 - Content: Research and Testing. Structural Parameters. Operational Parameters. Contact Parameters. Friction Parameters. Wear Parameters. Material Parameters and Selection. Appendix: Principles of General System Theory. KW - Tribology KW - Tribological parameters KW - Wear KW - Friction PY - 2017 SN - 978-1-62708-141-2 VL - 18: Friction, Lubrication, and Wear Technology SP - 2 EP - 14 CY - Materials Park, OH, USA AN - OPUS4-43589 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst A1 - Woydt, Mathias ED - Totten, George E. T1 - Tribological testing and presentation of data N2 - Content: Research and Testing. Machinery or Component-Level Tests. Laboratory and Specimen Testing. Laboratory Friction and Wear Tests. Investigation of Worn Surfaces. Presentation of Friction and Wear Data. Transition Diagrams. Tribomaps. Wear Data and Reliability. KW - Metals KW - Tribology KW - Friction KW - Wear PY - 2017 SN - 978-1-62708-141-2 VL - 18: Friction, Lubrication, and Wear Technology SP - 16 EP - 32 CY - Materials Park, OH, USA AN - OPUS4-43592 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz A1 - Said, Samir ED - Bian, Xuecheng ED - Chen, Y. ED - Ye, X. T1 - Vibration measurements for the control of damaged and repaired railway tracks N2 - This contribution presents experimental methods to detect track damage. At BAM (Federal Institute of Material Research and Testing), a measuring car with a measuring system of 72 channels, geophones, mountings, cables, harmonic and impulsive exciters is used for dynamic measurements of the track, the soil and buildings. An instrumented hammer allows force measurements and to evaluate transfer functions of the track, and the soil. Wave measurements are used to identify the soil characteristics. Train passages are measured at the track and for the train induced ground vibrations. In addition to these in situ options, tests of tracks or track elements can be performed in a large laboratory. KW - Track vibration KW - Track damage PY - 2018 SN - 978-981-10-4507-3 DO - https://doi.org/10.1007/978-981-10-4508-0_2 SP - 13 EP - 30 PB - Springer CY - Singaporer AN - OPUS4-45457 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brinker, U. A1 - Meinel, Dietmar A1 - Teßmann, B. A1 - Lübke, H. ED - Lewerentz, Annette T1 - Die menschlichen Skelettreste der zur anthropologischen Rudolf-Virchow-Sammlung gehörenden Kollektion des Fundplatzes Rinnukalnsim Norden Lettlands – Resultat eines Forschungsstreites des 19. Jahrhunderts im damaligen Livland N2 - In der anthropologischen Rudolf-Virchow-Sammlung der Berliner Gesellschaft für Anthropologie, Ethnologie und Urgeschichte (BGAEU) befindet sich eine größere Anzahl menschlicher Schädel aus dem Gebiet des heutigen Lettlands, die Mehrzahl dabei von der im Norden Lettlands am Burtnieksee gelegenen Fundstelle Riņņukalns. Der nachfolgende Aufsatz beschreibt die Gründe, warum diese Stücke in den 1870er Jahren in die Sammlung gelangt sind, und präsentiert eine anthropologische Dokumentation und Analyse der Schädelfunde vom Riņņukalns aus der Sammlung. KW - Mikro-CT KW - Anthropologie KW - Schädelfunde PY - 2018 SN - 978-3-86757-994-0 SN - 0178-7896 VL - 39 SP - 35 EP - 54 PB - Berliner Gesellschaft für Anthropologie, Ethnologie und Urgeschichte CY - Berlin AN - OPUS4-48071 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Grobert, Steffen A1 - Seeber, Henrik A1 - Krentel, Daniel A1 - Hauer, Thorsten T1 - Entwicklung eines Körpermodells und eines Stoßwellengenerators zur Simulation der intrakorporalen Stoßwellenausbreitung nach Explosionen N2 - Im Rahmen des wehrmedizinischen Sonderforschungsvorhabens 29K4 wird der Effekt der primären Explosionswirkung auf Soldaten untersucht. Dazu wird ein Stoßwellengenerator entwickelt, der relevante Überdrucklastfälle mit geringer Rüstzeit und hoher Reproduzierbarkeit erzeugt. Zudem wird ein vereinfachtes Torso-Modell erstellt, um das Verhalten des eingeleiteten Druckstoßes in das Körpermodell zu untersuchen. KW - Ballistik KW - Blast KW - Explosion KW - Explosionstrauma KW - Verdichtungsstoß PY - 2024 VL - 2023 SP - 126 EP - 127 CY - Bonn AN - OPUS4-62382 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meyer, S. A1 - Richter, S. A1 - Balski, Matthias A1 - Hagendorf, C. ED - Thirsk, M. T1 - Trace element analysis in crystalline silicon N2 - The reliable analysis of trace elements in silicon is of fundamental importance for the understanding of material properties and quality control of solar cells. This paper presents a demonstration of the power of two analytical techniques for the determination of trace elements in solar silicon: inductively coupled plasma mass spectrometry (ICP-MS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). These techniques are among the few that achieve sufficiently low detection limits and they may complement each other because of their specific performance. Examples are given of the quantitative chemical analysis of boron, phosphorus and iron in different types of solar silicon, as well as of the enrichment of metals and alkali metals in Si3N4 precipitates. PY - 2013 SN - 978-0-9565331-3-5 SP - 34 EP - 38 PB - Photovoltaics International CY - London, UK AN - OPUS4-29823 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph A1 - Altkrüger, Sabine A1 - Alte-Teigeler, R. A1 - Dröge, Ch. A1 - Faßbender, G. A1 - Habermann, H. A1 - Magner, J. A1 - Oelerich, M. A1 - Rode, P. A1 - Simmleit, N. A1 - Sikinger, T. A1 - Tölle, A. A1 - Zscherpe, O. A1 - Dudenhöfer, B. A1 - Johannsen, K. A1 - Taube, E. A1 - Zilken, M. ED - Eilers, M. T1 - Hinweise für die Herstellung von Abdichtungssystemen aus hohlraumreichen Asphalttraggerüsten mit nachträglicher Verfüllung für Ingenieurbauten aus Beton H HANV N2 - Die Anforderungen der modernen Infrastruktur machen schnell ausführbare Abdichtungs- und Brückenbelagssysteme für den Bundesfernstraßenbereich erforderlich. Dazu gibt es innovative Systemansätze, in denen unter Ausnutzung neuer asphalttechnologischer Erkenntnisse und Weiterentwicklungen innovative Belagsaufbauten in Ergänzung zum bestehenden technischen Regelwerk erarbeitet werden. Diese neuartigen Asphaltmaterialien mit verbesserten Asphalt-Gebrauchseigenschaften (Standfestigkeit; Tieftemperaturverhalten) werden durch Kombination mit neuartigen Flüssigkunststoffen zur Aufnahme von schnelle wiederholten Bewegungen (Rissüberbrückungseigenschaften) nochmals verbessert. Durch das optimierte Gebrauchsverhalten und die systembedingten technologischen Verbesserungen ist es bei Einhaltung besonderer materialtechnischer Anforderungen möglich, leistungsfähige Brückenabdichtungs- und Belagssysteme in deutlich schnellerer Bauzeit instandzusetzen bzw. im Neubau auszuführen. Die vorliegende Veröffentlichung verallgemeinert u. a. wissenschaftlich-technische Erkenntnisse der BAM und Erfahrungen im Umgang mit den spezialisierten Baustoffen in eine für die Straßenbaubehörden des Bundes und der Länder praktisch umsetzbare Weise. KW - bautechnisches Regelwerk KW - innovative und schnelle Brückenbeläge PY - 2015 SN - 978-3-86446-135-4 SP - 5 EP - 34 PB - FGSV Verlag CY - Köln AN - OPUS4-37133 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niemz, P. A1 - Baensch, Franziska A1 - Brunner, A. J. ED - Pavalache-Ilie, M. ED - Curtu, A. L. T1 - Acoustic Emission Analysis And Synchrotron-based Microtomography of glued shear strength samples from spruce wood N2 - To better understanding the failure of adhesive joints tensile tests were carried out on miniature test specimens from Norway spruce in the synchrotron. Urea-formaldehyde resin was used as adhesive. e. For comparison purposes, tensile tests were carried out on solid wood and on bonded miniature tensile shear samples with acoustic emission. The acoustic emission signals of all the experiments occurred with classified pattern recognition. This resulted in two classes of signals for each two frequency peaks. One class consisted of the low-frequency and the other of the higher-frequency peak of higher intensity, but this was essentially independent from the structure (solid wood or plywood) and size scale of the test specimens. The influence of the adhesive layers was determined on wood test specimens on laboratory scale and on miniature test specimens with an adhesive layer and selected fiber orientations. This gave evidence that the sound emission signals from the failure of the adhesive layer presumably of the class with low frequency signals peak in the range of services can be assigned. KW - Wood KW - Bondline KW - In-situ test KW - Acoustic emission KW - Synchrotron tomography PY - 2020 DO - https://doi.org/10.31926/but.fwiafe.2020.13.62.1.7 VL - 13 IS - 62 Part 1 SP - 81 EP - 88 PB - Transilvania University Press, Brasov, Romania CY - Brasov AN - OPUS4-51010 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meng, Birgit A1 - Fontana, Patrick A1 - Müller, Urs ED - Stephan, D. T1 - Nano-Gefügeanalytik als Optimierungsgrundlage für innovative Baustoffe - am Beispiel zementgebundener Baustoffe KW - Nanotechnologie KW - Analytik KW - Gefüge KW - Zement KW - Beton PY - 2007 SN - 3-89958-348-9 IS - 8 SP - 36 EP - 49 PB - Kassel University Press GmbH CY - Kassel AN - OPUS4-16363 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Budnik, J. A1 - Betz, T. A1 - Fromm, A. A1 - Gerdes, A. A1 - Gerlach, J. A1 - Götz, M. A1 - Hintzen, W. A1 - Hüttl, R. A1 - Kämpfer, W. A1 - König, A. A1 - Kühner, S. A1 - Lohaus, L. A1 - Meng, Birgit A1 - Neumann, T. A1 - Patzer, M. A1 - Schaab, A. A1 - Schauerte, J. A1 - Siebert, B. A1 - Stephan, D. A1 - Tebbe, H. A1 - Wagner, J.-P. ED - Siebert, B. T1 - Chemischer Angriff auf Betonbauwerke - Bewertung des Angriffsgrads und geeignete Schutzprinzipien N2 - In verschiedenen Bereichen des Betonbaus ist Beton einem chemischen Angriff von außen ausgesetzt, der die Dauerhaftigkeit des betreffenden Bauteils bzw. des gesamten Bauwerks beeinträchtigen kann. Für einen chemischen Angriff in natürlichen Böden und Grundwässern bestehen normative Vorgaben in DIN 4030-1 [R10] bzw. DIN 1045-2 [R19], um den Angriffsgrad anhand der Art und Konzentration der angreifenden Stoffe in Expositionsklassen XA1 (schwach angreifend) bis XA3 (stark angreifend) einzustufen. Hinsichtlich weiterer maßgeblicher Einflussfaktoren wird an dieser Stelle nicht näher differenziert, ob und inwieweit die Regelungen für Böden und Grundwässer auch auf andere Bereiche mit chemischem Angriff auf Beton zu übertragen sind, ist stets im Einzelfall zu überprüfen. Ebenfalls sind die zu treffenden Maßnahmen über die Vorgaben der DIN EN 206-1/DIN 1045-2 [R19] hinaus anwendungsspezifisch festzulegen. Der Hauptausschuss Baustofftechnik (HABT) des DBV hat daher den Arbeitskreis "Chemischer Angriff auf Beton" beauftragt, dieses Merkblatt zu erarbeiten, das Hilfestellung bei der Bewertung einer projektspezifischen chemischen Angriffssituation auf Beton sowie bei der Planung und Ausführung von Schutzprinzipien leisten soll. KW - Beton KW - Betonangriff KW - Dauerhaftigkeit KW - Säureangriff KW - Sulfatangriff PY - 2014 SP - 1 EP - 101 PB - Eigenverlag Deutscher Beton- und Bautechnik-Verein e. V. CY - Berlin AN - OPUS4-44662 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beckenbauer, T. A1 - Root, V. A1 - Radenberg, M. A1 - Nytus, N. A1 - Drewes, B. A1 - Hübner, R. A1 - Recknagel, Christoph A1 - Stöckert, U. A1 - Gottaut, C. T1 - Teilvorhaben VI-II - Optimierung der lärmtechnischen und bautechnischen Wirksamkeit und Nutzungsdauer dichter Asphaltdeckschichten N2 - Straßenverkehr stellt in Deutschland die stärkste Quelle für Lärmbelastungen dar. In 2014 wurde durch den Forschungsverbund Leiser Verkehr ein Bericht zur Situation der Lärmwirkungsforschung in Deutschland veröffentlicht, der den aktuellen Wissensstand zum Einfluss des Verkehrslärms auf die Lebensqualität und die Gesundheit der Bevölkerung dokumentiert. Verschiedene Studien belegen, dass Dauerbelastungen über 65 dB(A) die Betroffenen stark beeinträchtigen. So mindern die hohen Lärmbelastungen nicht nur die Lebensqualität, sondern sie können auch Herz-Kreislauf-Erkrankungen, Schlafstörungen, kognitive Leistungseinschränkungen und Tinnitus verursachen. Gerade wegen des stetig wachsenden Verkehrsaufkommens sind deshalb Strategien zu entwickeln, die die Bevölkerung noch wirksamer vor Straßenverkehrslärm schützen. Aus dem Verkehrsforschungsprogramm der Bundesregierung wurden seit 2001 die Verbundprojekte Leiser Straßenverkehr gefördert. In 2014 wurde das dritte und letzte Verbundprojekt erfolgreich abgeschlossen. Das Verbundprojekt Leiser Straßenverkehr 3 (LeiStra3) hatte sich als zentrales Ziel gesetzt, Maßnahmen zur Minderung des Straßenverkehrslärms in Ballungsräumen zu entwickeln, die dort aufgrund der hohen Bevölkerungsdichte besonders wirkungsvoll sind. Es wurden verschiedene Forschungsansätze verfolgt, die die Geräuschemission an der Lärmquelle nachhaltig reduzieren. Da die Geräuschemission des fließenden Verkehrs maßgeblich durch Wechselwirkungen an der Kontaktstelle von rollendem Reifen und Fahrbahn bestimmt wird, standen die Reifen-Fahrbahn-Geräusche im Fokus der Untersuchungen. Ein Schlüsselelement in LeiStra3 war die Erweiterung des Simulationsmodells SPERoN zur quantitativen Analyse und Vorhersage der Reifen-Fahrbahn-Geräusche. Systematische Analysen von experimentell aufgenommenen Geräuschspektren mit dem Modell zeigten in LeiStra3, dass neben der Anregung von Reifenschwingungen aerodynamische Effekte im Reifen-Fahrbahn-Kontakt maßgeblich an der Geräuschentstehung beteiligt sein müssen. Um diese aerodynamischen Effekte eingehend charakterisieren und kritische Größen identifizieren zu können, mussten auf einem angemieteten Testgelände Modelloberflächen mit speziellen Texturmustern hergestellt werden, die die Entstehungsmechanismen des Rollgeräusches weitgehend getrennt und unabhängig voneinander anregen. Diese Projektstudien bildeten die Grundlage für die Entwicklung eines tragfähigen physikalischen Modells zur Beschreibung der aerodynamischen Effekte. Im Ergebnis von LeiStra3 lassen sich mit SPERoN 2020 nun reale Fahrbahnoberflächen hinsichtlich ihres Einflusses auf die Reifen-Fahrbahn-Geräusche quantitativ analysieren und Designs für neuartige geräuschmindernde Fahrbahnbeläge zuverlässig synthetisieren. Darüber hinaus stellt das Modell ein leistungsfähiges Modul zur Reifenoptimierung zur Verfügung, mit dem der Einfluss der Profilierung und des Reifenaufbaus auf die Schallabstrahlung und den Rollwiderstand untersucht werden kann. Im Fokus stand dabei die Auswahl und Anwendung geeigneter numerischer Verfahren zur Verkürzung der Rechenzeiten, um ein praxistaugliches Optimierungstool bereit zu stellen. Dies ermöglicht eine effiziente Bestimmung von Schallabstrahlung und Rollwiderstand ohne aufwendigen Prototypenbau. Im Regionalverkehr treten vielfach Beschleunigungs- und Abbremsvorgänge auf, zudem werden häufig enge Kurven durchfahren. Um die nötige Traktion zu gewährleisten, müssen die Antriebsachsreifen Profile mit einem hohen Anteil an Querrillen aufweisen. Diese Blockprofile neigen zu einer starken Schwingungsanregung auf der Fahrbahn und damit zu einer höheren Geräuschemission. In LeiStra3 wurden technologische Ansätze erarbeitet, um Rollgeräusche blockprofilierter Lkw-Reifen über die gesetzlichen Grenzwerte hinaus zu reduzieren. Im Straßenversuch hat eine Entwicklungsvariante einen Schalldruckpegel von 74,4 dB(A) erreicht. Gegenüber den aktuellen Produkten wurde damit eine Geräuschreduzierung von etwa 4 bis 5 dB(A) erzielt. Diese Variante wurde etwa ein Jahr nach Projektabschluss auf dem Markt eingeführt. Darüber hinaus wurden in LeiStra3 schallabsorbierende Unterbodenverkleidungen realisiert, die das Rollgeräusch effizient absorbieren und damit den Vorbeifahrtpegel um bis zu 3 dB(A) mindern können. Mit Blick auf Elektrofahrzeuge wurden grundlegende Untersuchungen zur Reifen-Fahrbahn-Wechselwirkung unter Antriebsmoment und zur psychoakustischen Charakterisierung durchgeführt. Einen weiteren Schwerpunkt in LeiStra3 stellte die Entwicklung leiserer Fahrbahnoberflächen dar. Modellrechnungen belegen, dass die Oberflächengestalt einen starken Einfluss auf die Schwingungsanregung des Reifens und die aerodynamischen Vorgänge in der Kontaktfläche zwischen Reifen und Fahrbahn hat. Aus akustischer Sicht ist es günstig, wenn alle Profilspitzen auf einer Ebene liegen und sich plateauartige Texturen mit schluchtenförmigen Vertiefungen ausbilden. Die lärmtechnisch optimierte Asphaltdeckschicht AC D LOA stellte zu Projektbeginn eine neue Entwicklung in der Straßenbautechnik dar und greift diesen Ansatz auf. Die Deckschicht wurde auf Basis einer dichten Asphaltzusammensetzung konzipiert und zeichnet sich durch eine Korngrößenverteilung aus, die auf eine lärmtechnisch wirksame Oberflächentextur abgestimmt ist. Der erste Einbau von AC D LOA erfolgte 2007 in Düsseldorf im Bereich der kommunalen Straßen. In LeiStra3 wurde daran gearbeitet, die Verdichtungswilligkeit des Asphaltmischgutes zu verbessern. Auf diese Weise lassen sich die Dauerhaftigkeit der Deckschicht und damit ihr lärmtechnischer Nutzen erhöhen. Die Erkenntnisse flossen in die neuen „Empfehlungen für die Planung und Ausführung von lärmtechnisch optimierten Asphaltdeckschichten“ ein, die in 2015 von der Forschungsgesellschaft für Straßen- und Verkehrswesen herausgegeben wurden. Der Gussasphalt mit offenporiger Oberfläche (engl.: Porous Mastic Asphalt, PMA) zeigt ebenfalls lärmmindernde Effekte. Im Vergleich zum herkömmlichen Gussasphalt enthält der PMA einen wesentlich höheren Anteil grober Gesteinskörnung. Es entsteht eine Deckschicht, die im unteren Bereich dicht und im oberen Bereich offenporig strukturiert ist. Die akustische Wirksamkeit ergibt sich aus der günstigen Oberflächentextur und einem hohen Hohlraumgehalt. In 2009 wurden erste Erprobungsstrecken gebaut, bei denen Schallpegelmessungen nach der Statistischen Vorbeifahrtmethode eine Lärmminderungen von bis zu 3 dB(A) gegenüber dem Referenzwert zeigten. Auf Grundlage dieser Erkenntnisse wurden in LeiStra3 weiterführende Untersuchungen durchgeführt, um die Ausführungssicherheit des PMA zu erhöhen. Zu diesem Zweck wurde die Mischgutzusammensetzung optimiert und Laborverfahren zur Herstellung von praxisnahen Probekörpern für die Mischgutkonzeption entwickelt. Auf den Bundesautobahnen A 553 bei Brühl, A 3 bei Lohmar und A 5 bei Friedberg konnten Erprobungsstrecken mit verschiedenen PMA-Varianten hergestellt werden. Diese wurden hinsichtlich der Mischgut- und Einbauparameter untersucht. Außerdem wurde in LeiStra3 untersucht, inwieweit der Herstellungsprozess von Elektroofenschlacke (EOS) verbessert werden kann, um bestimmte Kornformen und Korngrößen gezielt zu erzeugen und damit einen hochwertigen Ausgangswerkstoff für den Asphaltstraßenbau zu gewinnen. Im ersten Schritt wurden dazu EOS-Körnungen hinsichtlich ihrer bautechnischen Eignung geprüft und darauf aufbauend das Potenzial verschiedener Prozessrouten bewertet. Mit einer ausgewählten EOSKörnung (EloMinit®) konnten zwei Asphaltdeckschichtvarianten konzipiert und im Mai 2014 auf einem Testfeld eingebaut werden. Die Nachgiebigkeit bestimmt neben der Oberflächentextur und der Offenporigkeit die akustischen Eigenschaften eines Fahrbahnbelags. Ein Ziel in LeiStra3 war es, Asphaltkonstruktionen durch die Nutzung der schwingungsdämpfenden Eigenschaften des Straßenoberbaus geräuschmindernd zu gestalten. Dabei wurden verschiedene Ansätze wie die Integration einer elastischen Dämpfungsschicht oder die Konzeption eines Asphaltmischgutes mit schwingungsdämpfenden Eigenschaften verfolgt. Im Bereich Betonbauweisen stand die Herstellung einer Betondecke mit offenporiger Oberfläche (COPS) im Vordergrund. Die Grundidee des Systems COPS greift die im Asphaltstraßenbau bereits erfolgreich eingesetzte Mischgutkonzipierung mit hohem Grobkornanteil und einer feinkörnigen standfesten Bindemittel-/Mörtelphase auf. Während des Einbauvorganges sinkt der feinkörnige Mörtel nach unten ab, so dass innerhalb der oberen 10 mm der Deckschicht eine offenporige Oberfläche entsteht. In Laborversuchen wurde die Betonrezeptur so eingestellt, dass ein kontrolliertes Absetzverhalten des Zementleimes erreicht wird. Die Betonrezeptur muss möglichst stabil gegenüber Einflüssen von Witterung und Einbau sein, um die vorteilhaften akustischen Eigenschaften der fertigen Betondeckschicht sicherzustellen. Im Verbundprojekt LeiStra3 haben Partner aus Wirtschaft und Wissenschaft in einer interdisziplinär angelegten Forschungsarbeit gemeinsam Lösungen erarbeitet, mit denen das Lärmminderungspotenzial von Reifen, Fahrzeug und Fahrbahn weiter ausgeschöpft werden kann. In allen Arbeitspaketen wurden zahlreiche Ergebnisse und Erkenntnisse gewonnen, die dazu beigetragen haben, die bestehende Technik zu verbessern, die Impulse zur Entwicklung neuer Technologien gesetzt haben und auf deren Basis das Technische Regelwerk fortgeschrieben wurde. KW - Innovation KW - Lärmminderung KW - Straßenbeläge PY - 2017 UR - https://bast.opus.hbz-nrw.de/frontdoor/index/index/docId/2056 N1 - Das Verbundprojekt "Leiser Straßenverkehr 3" wurde durch das Bundesministerium für Wirtschaft und Technologie unter dem Förderkennzeichen 19U10016 A-M gefördert. SP - 312 EP - 381 PB - Bundesanstalt für Straßenwesen (BASt) CY - Bergisch Gladbach AN - OPUS4-54612 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Budnik, J. A1 - Betz, T. A1 - Brameshuber, W. A1 - Fromm, A. A1 - Gerdes, A. A1 - Gerlach, J. A1 - Götz, M. A1 - Hart, R. A1 - Heese, C. A1 - Hintzen, W. A1 - Hüttl, R. A1 - Kämpfer, W. A1 - König, A. A1 - Kühner, S. A1 - Lohaus, L. A1 - Meng, Birgit A1 - Neumann, T. A1 - Remus, R. A1 - Schaab, A. A1 - Schäffel, P. A1 - Schauerte, J. A1 - Schönborn, A. A1 - Siebert, B. A1 - Stephan, D. A1 - Tebbe, H. A1 - Wagner, J.-P. ED - Siebert, B. T1 - Chemischer Angriff auf Beton - Empfehlungen zur Prüfung und Bewertung N2 - ln den letzten Jahren wurden diverse Prüfverfahren und Methoden entwickelt, um die Leistungsfähigkeit von Beton bzw. Bindemittel hinsichtlich des Widerstands gegenüber betonaggressiven Einwirkungen beurteilen zu können. Ein wesentliches Ziel von Prüfverfahren zur Beurteilung der Dauerhaftigkeit von Baustoffen ist, die im Laufe der Nutzungsdauer zu erwartenden Einwirkungen auf den Baustoff realitätsnah abzubilden. Dazu sind die Prüfparameter auf die im jeweiligen Anwendungsbereich vorherrschenden Umgebungs- und Randbedingungen anzupassen. Daneben sind auch die Bewertungskriterien individuell unter Berücksichtigung der im Einzelfall geforderten Nutzungsdauer eines Bauwerks festzulegen. Eine systematische Zuordnung von adäquaten Prüfverfahren bzw. Prüfparametem und Bewertungskriterien für die verschiedenen Anwendungsbereiche im Betonbau, in denen betonaggressive Einwirkungen auftreten, ist mit Ausnahme von Einzelfällen bislang nicht vorhanden. Daneben stellt sich in der Praxis immer wieder das Problem, das Angriffspotenzial der Umgebung eines Bauwerks (prüftechnisch) zu erfassen und zu bewerten. Der Hauptausschuss Baustofftechnik des DBV hat daher den Arbeitskreis „Chemischer Angriff auf Beton“ beauftragt, dieses Merkblatt zu erarbeiten, das auf Basis von einschlägigen Erfahrungen der Baupraxis und wissenschaftlichen Erkenntnissen Grundsätze und bewährte Methoden zur Beurteilung der Einwirkungs- und Widerstandsseite beim chemischen Angriff auf Beton aufzeigt und diesbezüglich Hinweise für verschiedene Anwendungsbereiche im Betonbau liefert. KW - Beton KW - Betonangriff KW - Dauerhaftigkeit KW - Säureangriff PY - 2017 SP - 1 EP - 65 PB - Eigenverlag Deutscher Beton- und Bautechnik-Verein e. V. CY - Berlin AN - OPUS4-44663 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schneider, M. A1 - Meng, Birgit T1 - Ressourcenschonung bei der Zementherstellung am Beispiel des Einsatzes von Hüttensand PY - 2002 SN - 3-7640-0426-6 SP - 10 EP - 14 PB - Verlag Bau + Technik CY - Düsseldorf AN - OPUS4-2069 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, S. A1 - Pirskawetz, Stephan T1 - Monitoring mit Schallemissionsmessung N2 - Die Brücke am Altstädter Bahnhof in Brandenburg an der Havel stand bei ihrer Eröffnung im Jahr 1969 für die höchste Ingenieurskunst der damaligen Zeit und für einen in die Zukunft gerichteten Blick. Sie trug den Namen "Brücke des 20. Jahrestag", denn am 20. Jahrestag der DDR wurde die Brücke für den Verkehr freigegeben. Sie verbindet die westlichen Stadtbezirke mit dem Zentrum der Stadt Brandenburg an der Havel und wurde so von vielen Einwohner:innen genutzt. Zu Fuß, mit dem Rad, dem Auto oder mit der Straßenbahn. 50 Jahre später, im Dezember 2019, wurde bei einer Bauwerksprüfung eine starke Schadenszunahme festgestellt. Eine sofortige Sperrung für den Verkehr war unumgänglich. Das hatte es im Land Brandenburg bislang nicht gegeben und stellt einen einzigartigen Sonderfall bei der Bewertung von Bauwerken dar. Die Sperrung führte zu starken Einschränkungen für den Verkehr, für den Landesbetrieb Straßenwesen aber hatte die Sicherheit oberste Priorität. Um die Belastung für die Stadt so gering wie möglich zu halten, hat der Landesbetrieb Straßenwesen sofort mit der Planung für Abriss und Neubau der Brücke begonnen. So gelang es innerhalb von kurzer Zeit den Rückbau umzusetzen und die Pläne für den Ersatzneubau vorzustellen. Gleichzeitig bot sich die einmalige Gelegenheit, kurz vor dem Rückbau noch umfangreiche Untersuchungen zur Verifizierung des Schadensbilds durchzuführen und verschiedene Monitoringverfahren zum Einsatz zu bringen. Damit wurden wertvolle Erfahrungen gesammelt, die der Landesbetrieb Straßenwesen anderen Baulastträgern zur Verfügung stellen möchte. Sie ermöglichen es, bei baugleichen Bauwerken zielgerichteter handeln zu können. Die Fülle der untersuchten Aspekte ist in diesem Bericht dokumentiert. Diese umfangreichen Untersuchungen wurden vom Bundesministerium für Verkehr und digitale Infrastruktur finanziert. Dafür möchten wir uns herzlich bedanken. Mit großem Engagement digitabeteiligt haben sich auch die Bundesanstalt für Materialforschung und -prüfung, die Technische Universität Dresden, die Hochschule für Wirtschaft und Technik Dresden sowie das Unternehmen Bilfinger Noell und die Ingenieursozietät Zech, Ruth, Blasius. Auch bei Ihnen bedankt sich der Landesbetrieb Straßenwesen. KW - Baustoffe KW - Korrosion KW - Beton KW - Spannbeton KW - Brücke KW - Spannstahl KW - Spannungsrisskorrosion KW - Zerstörungsfreie Prüfung KW - Schallemissionsanlayse KW - Spanndrahtbruch PY - 2021 SP - 65 EP - 71 PB - Landesbetrieb Straßenwesen Brandenburg CY - Hoppegarten AN - OPUS4-54600 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Aßmann, J. A1 - Faßbender, G. A1 - Habermann, H. A1 - Hoppe, Johannes A1 - Hörnig, A. A1 - Loher, E. A1 - Magner, J. A1 - Michel, M. A1 - Oelerich, M. A1 - Recknagel, Christoph A1 - Rode, P. A1 - Sikinger, T. A1 - Tölle, A. A1 - Weitz, D. A1 - Willand, E. A1 - Zscherpe, O. ED - Eilers, M. T1 - H PMMA - Hinweise für die Herstellung von Abdichtungssystemen aus einer Polymerbitumen-Schweißbahn auf einer Versiegelung, Grundierung oder Kratzspachtelung aus PMMA für Ingenieurbauten aus Beton N2 - Die Ausführung von Abdichtungssystemen insbesondere an Ingenieurbauwerken der Verkehrsinfrastruktur greift in die unmittelbare Verfügbarkeit/Nutzbarkeit des Bauwerks ein und erfolgt deshalb i.a.R. unter höchstem Zeitdruck. Neuere materialtechnische Entwicklungen im Bereich der Flüssigkunststoff-Systeme erlauben kürzere Ausführungszeiten in einem erweiterten Einsatzspektrum. Zur Sicherstellung anforderungsgerechter Gebrauchseigenschaften des gesamten Brückenabdichtungssystems gibt die vorliegende Veröffentlichung Hinweise für die einzuhaltenden Baugrundsätze, bautechnologische Besonderheiten und Erfordernisse im Umgang mit Polymethylmethacrylat (PMMA) sowie qualitätssichernde Maßnahmen. KW - Schnelle Flüssigkunststoffsysteme KW - Brückenabdichtung PY - 2018 SN - 978-3-86446-224-5 VL - FGSV-Band 775 SP - 1 EP - 20 PB - FGSV-Verlag CY - Köln AN - OPUS4-47091 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nehls, Irene A1 - Schallschmidt, Kristin A1 - Becker, Roland A1 - Fischer-Tenhagen, C. A1 - Johnen, D. A1 - Leschber, G. A1 - Frese, S. A1 - Neudecker, J. A1 - Walles, T. ED - Schüler, C. ED - Püschel, K. T1 - BIOAIR - Ein interdisziplinäres Projekt zur Bestimmung von Krebsmarkern in der Atemluft N2 - Wie viele Forschergruppen, haben auch wir uns das langfristige Ziel gesetzt, einen Beitrag bei der Beantwortung der Frage zu leisten, was Hunde riechen, wenn sie Krebs erschnüffeln. Dabei sollen die Hunde nicht nur anzeigen, ob eine Atemluftprobe positiv oder negativ ist, sondern sie sollen auch aktiv eingebunden werden in den systematischen Suchprozess nach detektierbaren Biomarkern. So ist geplant, dass mittels eines präparativen Fraktionssammlers definierte Schnitte des Gaschromatogramms einzeln oder in möglichen Kombinationen auf das Adsorbervlies gebracht werden, um im Hundetraining eingesetzt zu werden. In analoger Weise könnte auch mit spezifischen Kandidatensubstanzen verfahren werden. PY - 2015 SN - 978-3-8300-8763-2 N1 - Serientitel: Forschungsergebnisse aus dem Institut für Rechtsmedizin der Universität Hamburg – Series title: Forschungsergebnisse aus dem Institut für Rechtsmedizin der Universität Hamburg VL - 30 SP - 93 EP - 101 PB - Dr. Kovac AN - OPUS4-33165 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias A1 - Scholz, Christian ED - Beswick, J.M. T1 - Slip-rolling resistance of alternative steels under high contact pressures in engine oils N2 - The inevitable increase of torque or load, because of lightweight approaches, pushes the oil-film temperatures on the teeth flanks of gears above 200°C, and requires alloys with higher strength and toughness properties. Furthermore, the real temperature on surfaces during the physical vapor deposition (PVD) or chemical vapor deposition (CVD) of thin films can exceed the annealing temperature of the state-of-the-art bearing and gear materials, such as AISI 52100 (1.3505), 16MnCr5 (1.7131), 21NiCrMo (1.6523), and 30CrMoV9 (1.7707). Such trends call for slip-rolling-resistant, alternative alloys suited for contact stresses above P0max of >2.2 GPa. The tribological profile under slip-rolling conditions at 120°C in a factory engine oil (SAE 0W-30, ACEA A3/B4, ν120°C = 5.33 mPa, HTHS150°C = 3.0 mPa) until 10 × 106 load cycles between P0max of 2.25 GPa to 3.92 GPa of uncoated 100Cr6 (1.3505, “PBQ”), 102Cr6 (1.2067), Cronidur 30 (1.4108, DESU), 45SiCrMo6 (1.8062, CVEM), 40SiNiCrMo1 [vacuum arc remelting (VAR)], CSS-42L (AMS 5932, vacuum induction melting (VIM)-VAR, and carburized), 36NiCrMoV1-5-7 (CAB), ASP2012 (ASP), and 20MnCr5 (1.7131, carburized) was established in twin disk machines (Amsler-type and 2Disk). The present benchmark illuminates the tribological impact of uncoated bearing steels in comparison to uncoated alternative steel alloys on friction, wear and slip-rolling resistance, as well as load carrying capacity. Iron-based steel alloyed with silicon or molybdenum reduces alloying costs and avoids thermo-chemical treatments. This benchmark suggests considering an extension to fracture toughness from hardness and strength as a relevant property for slip-rolling alloys. If slip-rolling resistant, the wear rates of the metallurgical different steels were more or less within one order of magnitude, but the influence of increasing contact stresses on the tribological profile differed significantly. KW - Slip rolling KW - Bearing steel KW - High toughness steel KW - Silicon KW - Molybdenum KW - Rolling KW - contact fatigue KW - High contact pressure KW - Low friction PY - 2015 SN - 978-0-8031-7605-8 DO - https://doi.org/10.1520/STP158020140018 SN - 2160-2050 N1 - Serientitel: ASTM International - Selected Technical Papers (STP) – Series title: ASTM International - Selected Technical Papers (STP) VL - 1580 SP - 210 EP - 238 AN - OPUS4-33121 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz A1 - Rücker, Werner ED - Nielsen, J.C.O. T1 - Mitigation measures against vibration for ballasted tracks - Optimisation of sleepers, sleeper pads and the substructure by combined finite-element boundary-element calculations N2 - The ground vibrations, which are generated by trains on different tracks, have been calculated by finite-element boundary-element models. The ballasted track is modelled in detail by the finite element method. The infinite soil is modelled by the boundary element method as a homogeneous or layered half-space. The track-soil system is coupled to a simple rigid mass model of the vehicle so that the vehicle-track interaction is completely included. Transfer functions are calculated in frequency domain without and with vehicle-track interaction, the compliance of the track and the mobilities of the soil at different distances from the track. Finally, the ratios between the ground vibration amplitudes with and without mitigation measures are calculated to quantify the effectiveness of the mitigation measures. Tracks with under-sleeper pads have been investigated in a wide parameter study for the RIVAS project. The main parameters that influence the reduction of ground vibration are the stiffness of the under-sleeper pad, the mass and the width of the sleeper. The softest sleeper pad yields the best reduction of the ground vibration. The influence of the sleeper mass is not so strong, as the characteristic frequency is ruled by the mass of the sleeper and the mass of the wheelset as well. PY - 2015 SN - 978-3-662-44832-8 DO - https://doi.org/10.1007/978-3-662-44832-8_48 VL - 126 SP - 401 EP - 408 PB - Springer CY - Berlin Heidelberg AN - OPUS4-32468 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Voigtsberger, Paul T1 - Gefährliche Eigenschaften chemischer Arbeitsstoffe PY - 1981 SN - 3-527-20006-1 N1 - Serientitel: Ullmanns Encyklopädie der technischen Chemie – Series title: Ullmanns Encyklopädie der technischen Chemie VL - 6 SP - 715 EP - 719 PB - Verl. Chemie CY - Weinheim AN - OPUS4-31941 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vogl, Jochen A1 - Rosner, Martin ED - Boschung, D. ED - Bremmer, J.N. T1 - Lead isotope analysis of an ancient voodoo doll KW - Archaeometry KW - Isotopes KW - Lead PY - 2015 SN - 978-3-7705-5725-7 SP - 127 EP - 132, Plates 1-5 PB - Wilhelm Fink GmbH & Co. Verlags-KG CY - Paderborn AN - OPUS4-33034 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habig, Karl-Heinz ED - Hornbogen, E. T1 - Possibilities of Model wear testing PY - 1981 SN - 3-88355-046-9 SP - 237 EP - 246 PB - DGM CY - Oberursel AN - OPUS4-32269 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Peuckert, J. A1 - De Souza, T.L. A1 - Mangelsdorf, Axel ED - Goncalves, J. ED - Göthner, K.-C. ED - Rovira, S. T1 - Infraestructura de la calidad e innovación N2 - El sólido vínculo entre las instituciones sociales de control de la calidad y la innovación no siempre resulta obvio. En los párrafos que siguen se sostiene que los servicios de normalización, metrología, evaluación del cumplimiento de las normas y acreditación prestados por la Infraestructura Nacional de la Calidad (INC) son grandes propulsores de nuevos avances sociales y tecnológicos. Todos los elementos de la infraestructura de la calidad ayudan a la sociedad a hacer frente a distintos desafíos en un entorno cambiante, mediante la creación y difusión de nuevas tecnologías. PY - 2014 UR - http://repositorio.cepal.org/bitstream/handle/11362/36634/S2014154_es.pdf?sequence=1 N1 - Serientitel: Colección Documentos de proyectos – Series title: Colección Documentos de proyectos IS - LC/W.588 SP - 25 EP - 32 AN - OPUS4-32727 LA - spa AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, T. A1 - Weisbrich, S. A1 - Wu, Cheng-Chieh A1 - Neitzel, F. ED - Breunig, M. ED - Al-Doori, M. ED - Butwilowski, E. ED - Kuper, P.V. ED - Benner, J. ED - Haefele, K.H. T1 - Advances in structural monitoring by an integrated analysis of sensor measurements and 3D building model N2 - The use of open GIS standards offers a broad variety of potential, particularly in the field of data exchange, data storage, and interoperability. GML and CityGML are excellent examples for the ontological description of real world objects by means of an open standard whereas SensorML serves to describe measurements, sensors and measuring platforms. The use of such standards offers not only the possibility of using a common standardised language, but also the use of open service standards. The combination of spatial data and sensor standards in services and service-oriented architectures goes far beyond previous existing solutions on the market and provides a novel platform for monitoring structures. That in fact is far more than a simple data storage model. The methods and models presented in this contribution allow a direct integration of sensor data and its provision through an open standard language. In this case, all the intermediate steps at any time through an open service interface are addressed and may be made available and provided to different actors and stakeholders participating in a construction scenario. The great potential and the added value of such an information system is the permanent availability of measurement and object data and an associated integrated analysis of sensor data in combination with a finite element model (FEM). The automatic derivation of a finite element model from the 3D structure model, the visualisation of FEM, the provision of raw (measurement) data and sensor information for each time of measurement transform the platform into a universal tool in the field of structural monitoring. This contribution introduces the individual components, the standards used and the interaction between the components to an overall system. KW - Structural monitoring KW - SensorML KW - Finite element method KW - Integrated analysis KW - City model KW - Building model PY - 2015 SN - 978-3-319-12180-2 SN - 978-3-319-12181-9 DO - https://doi.org/10.1007/978-3-319-12181-9_9 SN - 1863-2246 SN - 1863-2351 N1 - Serientitel: Lecture notes in geoinformation and cartography (LNG&C) – Series title: Lecture notes in geoinformation and cartography (LNG&C) SP - 141 EP - 156 PB - Springer AN - OPUS4-32736 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst A1 - Petersohn, Dieter A1 - Schwarz, Wolfram T1 - Oberflächenatlas - Rasterelektronenmikroskopische Aufnahmen und Profildiagramme PY - 1981 SN - 3-410-11346-0 SP - 65 EP - 114 PB - Beuth CY - Berlin AN - OPUS4-31955 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schimmelwitz, Peter T1 - Anmerkung zur Überarbeitung der Putznorm PY - 1982 SN - 3-433-00914-7 SP - 225 EP - 237 PB - Ernst & Sohn CY - Berlin AN - OPUS4-31804 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Köppe, Enrico A1 - Augustin, D. A1 - Köppe, Tabea A1 - Subaric-Leitis, Andreas A1 - Liers, A. A1 - Schiller, J. ED - Gartner, G. ED - Huang, H. T1 - Application of the inertial navigation system 3D-self-calibration-method for the minimization of the measurement uncertainty N2 - For the accuracy of inertial navigation systems for indoor localization it is important to get high quality sensor data of the multi-sensor system. This can be realized using high quality sensors or the developed 3D-self-calibration-method for low cost sensors. Based on the calibration procedure of the accelerometer (ACC) and the magnetic field sensor (MAG), the additional integration of the gyroscope (GYRO) leads to a reduction of the indoor positioning error. This improves both the approximation for the accelerometer, the magnetic field sensor and the gyroscope so that the standard deviation of a single sensor is minimized. There are errors in the whole system. To determine these error sources it is important to define the measurement uncertainty. In this paper it is presented that the measurement uncertainty can be reduced by the application of the developed 3D-self-calibration method. T2 - 11th International Symposium on Location Based Services CY - Vienna, Austria DA - 26.11. 2014 KW - 3D sensor KW - 3D calibration method KW - Indoor localization KW - Measurement uncertainty PY - 2014 SN - 978-3-319-11878-9 DO - https://doi.org/10.1007/978-3-319-11879-6_8 SN - 1863-2246 N1 - Geburtsname von Köppe, Tabea: Wilk, T. - Birth name of Köppe, Tabea: Wilk, T. N1 - Serientitel: Lecture Notes in Geoinformation and Cartography (LNG&C) – Series title: Lecture Notes in Geoinformation and Cartography (LNG&C) SP - 105 EP - 117 PB - Springer AN - OPUS4-32430 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Terstiege, Heinz T1 - Rationalisierung der Farbgebung durch Anwendung der DIN-Farbenkette PY - 1980 N1 - Serientitel: Schriftenreihe Landes- und Stadtentwicklungsforschung des Landes Nordrhein-Westfalen – Series title: Schriftenreihe Landes- und Stadtentwicklungsforschung des Landes Nordrhein-Westfalen IS - 3/28 SP - 104 EP - 109 CY - Dortmund AN - OPUS4-33290 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Linert, W. A1 - Holzweber, Markus A1 - Schmid, R. ED - Wypych, G. T1 - Solvent effects on chemical reactivity KW - Solute-solvent interactions KW - Donor-acceptor numbers KW - Theoretical and phenomenological descriptions of solvents and solutions PY - 2014 SN - 978-1-895198-64-5 SP - 753 EP - 810 PB - ChemTec Publishing CY - Toronto, Canada ET - 2nd Edition AN - OPUS4-30964 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Damm, David A1 - Pinnow, C.J. A1 - Schulz-Forberg, Bernd T1 - Telematik und Gefahrgutsicherheit - Regeln, Gefahrgut - Telematik und Datensicherheit N2 - In einer arbeitsteiligen Wirtschaft erfüllt der Transport eine herausragende Scharnierfunktion. Von der Wirtschaftlichkeit, Zuverlässigkeit und Sicherheit des Transportes hängen vielfältige Arbeitsergebnisse in den unterschiedlichen Prozessen ab. Aus den Bedürfnissen der Wirtschaft ergibt sich i.d.R. ein sogenannter Modal-Split, der die Aufteilung der Wirtschaftsgüter auf die verschiedenen Verkehrsträger Straße, Schiene, Binnenschiff, See und Luft beschreibt. Zuverlässigkeitsangaben und auch Angaben zur Sicherheitslage lassen sich aus den Statistiken herleiten, wie sie z.B. für Deutschland (Statistisches Bundesamt) und Europa (Eurostat) vorliegen. Die Unfallzahlen sind relativ gering, insbesondere aber ist die Tendenz einer stetigen Verringerung der Ereignisse pro Transport zu erkennen. Der Transport gefährlicher Güter ist integrativer Teil des allgemeinen Gütertransportes und demzufolge erfolgen die Transporte mit Gefahrgut auf den gleichen Verkehrswegen ohne nennenswerte Sonderstellungen, abgesehen von Spezialfällen, wie Transporte für die Bundeswehr. Für die Transporte gefährlicher Güter gibt es spezielle Regelungen, die für die verkehrsträgerunabhängigen Bereiche einheitlich von den Vereinten Nationen ausgearbeitet und als sogenannte Modellvorschriften veröffentlicht werden. In einem Rhythmus von zwei Jahren werden diese Modellvorschriften der Vereinten Nationen dem Stand der Technik angepasst, sodass quasi kontinuierlich die Optimierung der Regelsetzung erfolgt. Man kann heute davon ausgehen, dass der materielle Inhalt der Regeln der Vereinten Nationen in den wichtigsten Wirtschaftsregionen der Welt in entsprechenden bindenden Regeln seinen Niederschlag gefunden hat, sodass von einem nahezu einheitlichen Regelwerk für den Transport gefährlicher Güter auf der ganzen Welt ausgegangen werden kann. KW - Gefahrgut KW - Sicherheit KW - Telematik KW - RFID KW - SIGRID PY - 2014 N1 - Serientitel: Gefahrgut für die Praxis – Series title: Gefahrgut für die Praxis SP - Sonderausgabe, 25 EP - 28 PB - Deutscher Bundes-Verlag AN - OPUS4-31536 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vogl, Jochen A1 - Rosner, M. ED - Babbi, A. ED - Peltz, U. T1 - Bleiisotopenanalyse der römischen >Tabella Defixionis< N2 - Blei weist in der Natur die vier stabilen Isotope 204Pb, 206Pb, 207Pb und 208Pb auf, mit den entsprechenden Isotopenhäufigkeiten von 1,4%, 24,1 %, 22,1 % und 52,4 %686. Dabei sind 206Pb, 207Pb und 208Pb radiogene Isotope, welche als Endglieder der natürlichen Zerfallsreihen von 238U, 235U und 232Th entstanden sind. 204Pb ist ein sogenanntes primordiales Isotop, welches bereits vor Entstehung der Erde vorhanden war. Aufgrund dieser Prozesse weisen Gesteine, Mineralien und Erze eine charakteristische Bleiisotopenzusammensetzung auf, die von der Ausgangskonzentration an Blei, Thorium und Uran sowie von der seit der Gesteinsgenese vergangenen Zeit abhängt. Diese Eigenschaft bleibt auch während der Bleigewinnung aus dem Erz, meist Galenit, erhalten, auch wenn das Silber vorher durch Kupellation abgetrennt wurde687. Das in Silbererzen enthaltene Blei war ein willkommenes Nebenprodukt der Erzverhüttung und wurde zur Herstellung von Bleiobjekten verwendet. Artefakte, die aus dem so gewonnenen Blei gefertigt wurden, spiegeln daher die Bleiisotopenzusammensetzung der verwendeten Rohmaterialien wider. KW - Blei KW - Isotopenzusammensetzung KW - Fluchtafel KW - Herkunft PY - 2013 SN - 978-3-88467-207-5 SN - 0171-1474 N1 - Serientitel: Monographien des Römisch-Germanischen Zentralmuseums – Series title: Monographien des Römisch-Germanischen Zentralmuseums VL - 109 SP - 182 EP - 184 PB - Verlag des Römisch-Germanischen Zentralmuseums CY - Mainz AN - OPUS4-29842 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Redmer, Bernhard A1 - Föllner, Maik ED - Babbi, A. ED - Peltz, U. T1 - Radiographische Untersuchungen der Bronzeobjekte N2 - Ziel der Durchstrahlung war es, anhand von Bearbeitungsspuren am Objekt auf die Fertigungstechnologie und damit auf die Formgebung des Gegenstandes schließen zu können. Dazu wurde die technische Radiographie mit Speicherfolientechnik als zerstörungsfreies und bildgebendes Prüfverfahren angewendet. KW - Kunst KW - Bronze KW - Röntgentechnik KW - Computer-Radiographie PY - 2013 SN - 978-3-88467-207-5 SN - 0171-1474 N1 - Serientitel: Monographien des Römisch-Germanischen Zentralmuseums – Series title: Monographien des Römisch-Germanischen Zentralmuseums IS - 109 SP - 165 EP - 172 PB - Verlag des Römisch-Germanischen Zentralmuseums CY - Mainz AN - OPUS4-29786 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias T1 - Biolubrifiants N2 - Les huiles perdues, les fuites accidentelles et les lubrifiants perdus rejoignant les sols et les eaux (comme ce fut le cas pour le lac de Constance par exemple) sont l'un des points de departs de la mise en route des lubrifiants « neutres pour l'environnement». Meme en prenant en compte les voies du recyclage, la combustion dans les moteurs et les fuites connues, environ 30 % (entre 20 % et 40 %, selon les etudes du votume de lubrifiants entrent dans l'environnement par des voies non maitrisees ou sont probablement mis en decharge de maniere illegale. Avec de tels chiffres publies, les arguments des lobbyistes de l'industrie petrochimique, affirmant que, dans la plupart des applications, les fluides sont enfermes dans des reservoirs dos et etanches, ne convainquent pas les politiques. C'est aussi peut-etre parce qu'en Allemagne, environ 60 % des particuliers changent leur huile eux-memes. Dans une annee d'economie normale, environ 4,5 millions de tonnes de lubrifiants neufs sont vendues dans l'Europe des 15. PY - 2013 SN - 978-2-85059-309-3 N1 - Serientitel: Techniques de l'ingénieur – Series title: Techniques de l'ingénieur SP - TRI 1 800v2-1 EP - TRI 1 800v2-12 PB - Editons TI CY - Paris ET - Déc. 2013 AN - OPUS4-30191 LA - fra AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfennig, Anja A1 - Wolf, Marcus A1 - Schulze, Thomas ED - Knaut, M. T1 - Werkstoffcharakterisierung für Implantattechnologie in in-situ Ermüdungsversuchen N2 - Beim Einsatz von Werkstoffen im menschlichen Körper ist neben der Biokompatibilität ebenso die mechanische und korrosive Beständigkeit entscheidend. Da die im Körper zyklisch-mechanisch belasteten Implantate den hochkorrosiven Körperflüssigkeiten und möglicherweise korrosiven Gasen ausgesetzt sind, ist Schwingungsrisskorrosion (SwRK) eine gefürchtete Ursache für Werkstoffschädigungen. Damit ist unweigerlich eine Verringerung der Lebensdauer dieser Komponenten verbunden, die im schlimmsten Fall zum Versagen des Bauteils führen kann KW - Werkstoffcharakterisierung KW - Schwingungskorrosion PY - 2014 SN - 978-3-8305-3368-9 SP - 160 EP - 165 PB - BWV - Berliner Wissenschafts-Verlag CY - Berlin AN - OPUS4-31208 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bertin, Annabelle T1 - Polyelectrolyte complexes of DNA and polycations as gene delivery vectors N2 - This review gives representative examples of the various types of synthetic cationic polymers or polyampholytes (chemical structure, architecture, etc) that can be used to complex DNA (forming polyplexes) for their application in gene delivery. In designing polycations for gene delivery, one has to take into account a balance between protection of DNA versus loss of efficiency for DNA condensation and efficient condensation versus hindering of DNA release. Indeed, if the polyplexes are not stable enough, premature dissociation will occur before delivery of the genetic material at the desired place, resulting in low transfection efficiency; on the other hand, a complex that is too stable will not release the DNA, also resulting in low gene expression. The techniques generally used to determine these properties are gel electrophoresis to test the DNA/polymer complexation, ethidium bromide or polyanion displacement to test the affinity of a polymer for DNA, and light scattering to determine the extent of DNA condensation. Moreover, with the development of more precise instruments for physico-chemical characterization and appropriate biochemical and biophysical techniques, a direct link between the physico-chemical characteristics of the polyplexes and their in vitro and in vivo properties can be drawn, thus allowing tremendous progress in the quest towards application of polyplexes for gene therapy, beyond the research laboratory. KW - Colloidal stabilization KW - DNA KW - Gene delivery vectors KW - Polyampholytes KW - Polycations KW - Polyelectrolyte complexes KW - Polyplexes PY - 2014 SN - 978-3-642-40745-1 SN - 978-3-642-40746-8 DO - https://doi.org/10.1007/12_2013_218 N1 - Serientitel: Advances in polymer science – Series title: Advances in polymer science VL - 256 SP - 103 EP - 195 PB - Springer AN - OPUS4-30060 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Scholz, Christian A1 - Spaltmann, Dirk A1 - Woydt, Mathias ED - Mang, T. T1 - Coatings for slip-rolling N2 - The contribution of thin films, such as diamond-like carbons (DLCs), to reduce friction under mixed/boundary conditions in highly concentrated contacts enternd into focus. This is the more so, as their slip-rolling resistance became pertinent, proven, and repeatable in particular from batch to batch. Therefore, using such coatings to reduce power losses in the whole power train receives a dramatically increasing priority. The actual benchmark covers slip-rolling contacts above FZG 14 (Pomax >2.17 GPa) lubed by a factoryfill engine oil (SAE 0W-30 VP1: v120 °c = 5.33 mPas; HTHS150 °c = 3.0 mPas) at 120 °C. These Parameters are typical for power-train applications. The present benchmark illuminates the tribological impact, friction, wear, and slip-rolling resistance as well as load-carrying capacity of commonly used uncoated bearing steels and uncoated alternative Steel alloys in comparison to high performance thin film coatings (e.g., a-C, ta-C, Zr(C,N)). The benchmark suggests a change in philosophy. Rather than prescribing specific oils, formulated to specifically reduce the friction of thin films, better results can be obtained, if the uncoated Steel metallurgy and the thin films can respond uniformly to common, hydrocarbon-based engine oil formulations used by end users. KW - DLC KW - High-toughness steels KW - Slip-rolling motion KW - Thin film coatings KW - Zr(C,N) PY - 2014 SN - 978-3-642-22646-5 SN - 978-3-642-22647-2 VL - 1 SP - 256 EP - 269 PB - Springer CY - Heidelberg AN - OPUS4-30496 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wäsche, Rolf A1 - Hartelt, Manfred ED - Mang, T. T1 - Fretting N2 - The importance of lubricants in virtually all fields of the engineering industry is reflected by an increasing scientific research of the basic principles. Energy efficiency and material saving are just two core objectives of the employment of high-tech lubricants. The encyclopedia presents a comprehensive overview of the current state of knowledge in the realm of lubrication. All the aspects of fundamental data, underlying concepts and use cases, as well as theoretical research and last but not least terminology are covered in hundreds of essays and definitions, authored by experts in their respective fields, from industry and academic institutes. KW - Fretting corrosion KW - Fretting fatigue KW - Fretting regimes KW - Fretting wear KW - Mixed fretting regime PY - 2014 SN - 978-3-642-22646-5 SN - 978-3-642-22647-2 DO - https://doi.org/10.1007/978-3-642-22647-2 VL - 2 SP - 680 EP - 687 PB - Springer CY - Heidelberg AN - OPUS4-30497 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias ED - Mang, T. T1 - Polyalkyleneglycols as engine oils N2 - Polyalkyleneglycols are oxygen containing base oils, which enable a) polymer-free formulations with high intrinsic viscosity indices favorable for fuel economy, b) bio-no-tox properties and c) low viscosity formulations with low evaporaions. The oxygen present in each monomer of the backbone of polyalkylene glycols defines intrinsic properties, such as high viscosity indices, low NOACK-evaporation, extreme pressure, high hear capacities, etc., thus enabling metal-, ash- and polymer-free engine oil formulations supporting the functional benefits, such as improved of fuel economy or no adverse effects on after-treatment devices. KW - Alternative engine oil KW - Glycol KW - Polyether KW - Polyglycol PY - 2014 SN - 978-3-642-22646-5 SN - 978-3-642-22647-2 VL - 3 SP - 1363 EP - 1379 PB - Springer CY - Heidelberg AN - OPUS4-30498 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wäsche, Rolf A1 - Woydt, Mathias ED - Mang, T. T1 - Stribeck curve N2 - The importance of lubricants in virtually all fields of the engineering industry is reflected by an increasing scientific research of the basic principles. Energy efficiency and material saving are just two core objectives of the employment of high-tech lubricants. The encyclopedia presents a comprehensive overview of the current state of knowledge in the realm of lubrication. All the aspects of fundamental data, underlying concepts and use cases, as well as theoretical research and last but not least terminology are covered in hundreds of essays and definitions, authored by experts in their respective fields, from industry and academic institutes. PY - 2014 SN - 978-3-642-22646-5 SN - 978-3-642-22647-2 DO - https://doi.org/10.1007%2F978-3-642-22647-2 VL - 4 SP - 1998 EP - 2005 PB - Springer CY - Heidelberg AN - OPUS4-30499 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Mang, T. T1 - Tribosystems N2 - A tribosystem is an entity with a structure of interacting components in relative motion to perform a technical function. Note 1 Function and structure of tribosystems may be detrimentally influenced by frictioninduced energy dissipation and wear-induced materials degradation. Note 2 Friction and wear in tribosystems can be mitigated by lubricants and lubrication. KW - Systems with tribological stress PY - 2014 SN - 978-3-642-22646-5 SN - 978-3-642-22647-2 VL - 4 SP - 2178 EP - 2183 PB - Springer CY - Heidelberg AN - OPUS4-30500 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias ED - Mang, T. T1 - Wear N2 - Original equipment manufacturers (OEMs) and end-users perceive “wear” or “oil drain” differently. Spare parts, Services, and accessories contribute to an important portion to the profit of the OEMs. Maintenance and shutdowns define the operational costs of end-users. Thus, the strategy in order to exploit “wear” depends from the market structure and is up to the reader and/or applicant. The topic “Service Life/Durability/Life Cycle” represents a very ambiguous one and was already thematized in earlier times. KW - Wear mechanisms KW - Wear rate PY - 2014 SN - 978-3-642-22646-5 SN - 978-3-642-22647-2 VL - 4 SP - 2343 EP - 2346 PB - Springer CY - Heidelberg AN - OPUS4-30501 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habig, Karl-Heinz ED - zum Gahr, Karl-Heinz T1 - Gleitverschleiß N2 - Beim Gleitverschleiß handelt es sich um eine Verschleißart, die an sehr unterschiedlichen tribotechnischen Systemen auftreten kann. Zu nennen sind z.B. : Gleitlager, Führungen, Dichtungen, Reibungsbremsen und auch Werkzeuge der Zerspanungs- und Umformtechnik. Zur Fertigung dieser Bauteile und Werkzeuge werden verschiedenartige Werkstoffe eingesetzt und zwar metallische, keramische und polymere Materialien. Beim Gleitverschleiß können die vier wichtigsten Verschleißmechanismen getrennt und überlagert wirksam werden. Die Größe des Verschleißbetrages hängt u.a. entscheidend vom Reibungszustand ab, der zunächst kurz behandelt werden soll. PY - 1983 SN - 3-88355-064-7 SP - 119 EP - 134 PB - Dt. Ges. für Metallkunde CY - Oberursel AN - OPUS4-39762 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habig, Karl-Heinz A1 - Kelling, Norbert ED - Bunk, W. ED - et al., T1 - Untersuchungen der Verträglichkeit von Schmierölen mit metallurgischen Gleitwerkstoffen bei tribologischer Beanspruchung N2 - Schmieröle können Bestandteile enthalten, welche metallische Gleitlagerwerkstoffe korrosiv angreifen. Dadurch kann die Funktionsfähigkeit von Gleitlagern beeinträchtigt werden. Durch tribologische Beanspruchungen werden chemische Reaktionen und somit wahrscheinlich auch Korrosionsvorgänge in vielen Fällen erheblich beschleunigt. Um dies zu untersuchen, wurden mit dem Stift-Scheibe-Prüfsystem unter Mischreibungsbedingungen tribologische Prüfungen an unterschiedlichen Gleitlagerwerkstoff-Öl-Kombinationen durchgeführt, wobei gehärteter Stahl als Gegenkörperwerkstoff diente. Die Ergebnisse zeigen, daß eine tribochemische Reaktionsschichtbildung schon nach kurzen Beanspruchungszeiten und bei niedrigen Öltemperaturen einsetzt. Die gebildeten Reaktionsschichten wirken aber durchweg verschleißmindernd. Eine für einige Gleitlagerwerkstoff-öl-Kombinationen beobachtete erhöhte Rauheit der Gleitflächen könnte aber das Erreichen von hydrodynamischen Betriebszuständen erschweren. PY - 1983 SN - 978-3-642-52227-7 VL - 6 SP - 165 EP - 206 PB - Springer CY - Berlin AN - OPUS4-39764 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habig, Karl-Heinz ED - zum Gahr, Karl-Heinz T1 - Systemtechnik tribologischer Vorgänge N2 - Warum steht ein Beitrag mit dem Thema "Systemtechnik tribologischer Vorgänge" am Anfang dieses Buches über Reibung und Verschleiß? Dies liegt darin begründet, daß Reibung und Verschleiß von einer Fülle von Einflußgrößen abhängen, deren Gesamtheit sich am besten mit der Methodik der Systemanalyse überschauen läßt. Schon kleine Änderungen eines Parameters können eine beträchtliche Auswirkung auf die Größe der Reibungszahl oder des Verschleißbetrages haben. Hierzu sollen nachfolgend einige Beispiele aufgeführt werden. In Bild 1 ist die Verschleißrate eines weichen und eines harten Baustahles für zwei Winkel eines auf die Oberfläche auftreffenden Quarzsandstrahles aufgetragen. PY - 1983 SN - 3-88355-064-7 SP - 13 EP - 28 PB - Dt. Ges. für Metallkunde CY - Oberursel AN - OPUS4-39760 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rabin, Ira ED - Elgvin, Torleif ED - Langlois, Michael ED - Davis, Kipp T1 - Material analysis of the fragments N2 - The International Qumran project conducted at the BAM Federal Institute for Materials Research and Testing in 2007–10 aimed at establishing an optimal methodology for an accurate characterization of the Dead Sea Scrolls to address such questions as archaeological provenance, origin, and attribution of fragments to a specific sheet (Rabin 2013). Using equipment of various degrees of complexity we have shown that part of the historic information stored in the material can be revealed by proper characterization of the material. The on-site investigation of the Dead Sea Scrolls fragments from The Schøyen Collection in October 2012 offered the first chance to test this methodology in a field study. For the first time, we used mobile and non-invasive technology exclusively, since we could not transport all of our laboratory equipment to Norway for this project. Moreover, besides the technical limitations dictated by the available equipment, we had to cope with limited time: it was impossible to perform the number of scans required for optimal characterization of over 30 fragments within the fourteen days available. Nevertheless this study presents an important step in the material analysis of the Dead Sea Scrolls, since the devices we used are easily transportable, well known, and easily accessible throughout the world. KW - Archaeometry KW - Cultural heritage KW - Dead Sea scrolls PY - 2016 SN - 978-0-5671-1300-9 SN - 978-0-5672-8571-3 VL - 71 SP - 61 EP - 77 PB - Bloomsbury T&T Clark Series CY - New York; NY 10018 USA AN - OPUS4-39246 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rabin, Ira ED - Elgvin, Torleif ED - Langlois, Michael ED - Davies, Kipp T1 - Ink Sample from Inkwell MS 1655/2 N2 - We have obtained a minute amount of dry ink scratched from the bronze inkwell MS 1655/2. The powder was stored between two glass slides to minimize contamination. For micro analysis by FTIR a sample of the ink powder was transferred into a diamond cell while for confocal Raman spectroscopy a micro sample was placed onto sticky tape. The same portion of the sample was also investigated by scanning electron microscopy, where the elements distribution was determined by EDX. KW - Archaeometry KW - Cultural heritage KW - Dead Sea scrolls PY - 2016 SN - 978-0-5671-1300-9 SN - 978-0-5672-8571-3 VL - 71 SP - 463 EP - 466 PB - Bloomsbury T&T Clark Series CY - New York, NY, USA AN - OPUS4-39225 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habig, Karl-Heinz ED - Bunk, Wolfgang ED - Hansen, Jörg ED - Geyer, Manfred T1 - Verschleiß-Schutzschichten: Verfahren, Eigenschaften, Anwendungen PY - 1983 SN - 978-3-540-12448-1 VL - 7 SP - 9 EP - 38 PB - Springer CY - Berlin AN - OPUS4-39706 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Quercetti, Thomas A1 - Müller, Karsten A1 - Musolff, Andre A1 - Nakagami, M. A1 - Komatsuki, S. A1 - Tamaki, H. A1 - Kishimoto, J. A1 - Fujisawa, K. A1 - Nishio, T. ED - Quercetti, Thomas T1 - Experimental testing of RAM packages within Japanese German projects N2 - In context with Japanese disposal and transport container safety assessment the German Federal Institute for Materials Research and Testing (Bundesanstalt für Materialforschung und -prüfung) per-formed extensive drop test series with prototypes of RAM packages in recent years. The paper presents two cooperative projects focused on project management, testing performance and experimental results. In the first project, a full-scale prototype of a package for transport and storage of spent fuel elements with a total mass of 127,000 kg and its reduced-scale model which was similar to the prototype in both geometry and design were drop tested in 9 m and 1 m puncture tests at various drop orientations under regulatory conditions. In context with a corresponding research project the test data was used in combination with numerical methods to investigate the phenomenon of internal cask- content collisions during drop tests. Here, technological gaps between basket or radioactive content and cask body or primary lid can be a reason for significant high dynamic loadings of cask components and its internals due to additional impact interactions in the cask cavity caused by inner relative movement between content and cask. Further investigations were carried out in the field of similarity mechanics comparing experimental drop test data of the full-scale prototype and reduced-scale model in regard to the transferability of package impact response from reduced-scale models to full-scale packages. In the second project, drop tests with a waste container for intermediate depth disposal were per-formed being contracted by Kobe Steel, Ltd. and a consortium of Japanese electric power plant com-panies. The drop test program comprised three single 8-m drop tests in a specimen’s corner edge orientation. For drop tests according to legal regulations for interim storage or final disposal it is often necessary to use a target which represents the real ground of the storage facility. In such cases the container hits directly onto a well-defined concrete slab on top of the IAEA target. Here, the directly impact target for the drop tests were concrete slabs manufactured in Japan and connected by mortar to the impact pad of the unyielding IAEA target. KW - Drop testing KW - Package PY - 2016 SP - Paper 1043, 1 EP - 13 CY - Kobe, Japan AN - OPUS4-37557 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph A1 - Alte-Teigeler, R. A1 - Bergmann, F.-J. A1 - Gebhards, G. A1 - Grabe, W. A1 - Guse, J. A1 - Hartel, S. A1 - Huth, P. A1 - Jannicke, B. A1 - Lobach, T. A1 - Schneider, T. A1 - Sondermann, E. A1 - Vengels, D. A1 - Voß, M. A1 - Willand, E. ED - Roßbach, W. T1 - Technische Lieferbedingungen für Fugenfüllstoffe in Verkehrsflächen TL Fug-StB 15 N2 - Nach mehr als 15-jähriger Anwendung und mit der zwischenzeitlichen Einführung europäisch harmonisierter Normen für Fugenmaterialien war eine Anpassung Qualitäts- und Gütesicherungsanforderungen für Fugenfüllungen im Bundesfernstraßenbereich erforderlich. Hierbei ging es insbesondere darum, Maßnahmen und Verfahren zu entwickeln, um das nationale Qualitäts- und Gütesicherungsniveau weiter zu entwickeln und weiterhin sicher stellen zu können. Nach den Untersuchungserfahrungen im Labor und im Feld ging darum, neuartige Material- und Stoffkombinationen qualitätssicher dem Bauprozess zur Verfügung stellen zu können. Erforderliche Anforderungskriterien und zulässige Toleranzen der Lieferqualität wurden neu gefasst. Es wurde ein Verfahren entwickelt, europäische Bauprodukte qualitätsgesichert in den Bauprozess im Bundesfernstraßenbericht zu überführen. KW - Baustoffe KW - Fugenfüllsysteme KW - Anforderungs- und Leistungsrichtlinien PY - 2015 SN - 978-3-86446-163-7 SP - 1 EP - 39 PB - FGSV Verlag GmbH CY - Köln AN - OPUS4-37221 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Robertson, Daniela A1 - Schütt, Ch. A1 - Birke, V. ED - Zekkos, Dimitrios ED - Farid, Arvin ED - De, Anirban ED - Reddy, Krishna R. ED - Yesiller, Nazli T1 - Zero Valent Metal (ZVI) Nanoparticles in Geotextiles and Geomembranes N2 - Reactive geomembranes and geotextiles are an innovative approach to control the migration of contaminants in geotechnical applications. Within a joint research project in cooperation with a medium-sized enterprise, the preparation and characterization of “reactive” geomembranes and geotextiles modified by the addition of zero-valent metal nanoparticles was performed. Zero-valent iron (ZVI) nanoparticles were added to polyethylene or to the fillings of geo-containers or geosynthetic clay liners. These geosynthetic products consist of mixtures of sand with clay or bentonite, typically embedded in geotextile nonwovens or geomats. The permeability of these geo-containers can be adjusted by the ratio of clay or bentonite to sand. ZVI nanoparticles were also added as reactive material to geomembranes made of polyethylene with additives like the antioxidant Irganox 1010 or glycerin. These additives prohibit oxidation of the nanoparticle and act as hydrogen donor in the dechlorination of chlorinated hydrocarbons. Contaminates such as chlorinated hydrocarbons and toxic heavy metal compounds are either decomposed or converted to less toxic species (e.g. Cr-(VI) reduction to Cr-(III)). The paper reports the first experimental results from manufacturing of the reactive geomembrane model materials and characterization of the products with microscopic techniques. First breakthrough measurements of the ZVI modified geomembrane compared to a reference sample are presented. KW - geomembranes KW - geotextiles KW - nano particles KW - nano iron PY - 2016 UR - http://ascelibrary.org/page/books/s-gsp SN - 978-0-7844-8012-0 DO - https://doi.org/10.1061/9780784480120 VL - 269 SP - 498 EP - 507 PB - American Society of Civil Engineers CY - Reston, VA, USA ET - 1 AN - OPUS4-37264 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brocks, Wolfgang A1 - Klingbeil, Dietmar A1 - Künecke, Georgia A1 - Sun, D.-Z. ED - Kirk, M. ED - Bakker, A. T1 - Application of the Gurson model to ductile tearing resistance KW - Material damage KW - Gurson model KW - Finite element analysis KW - Fracture mechanics KW - Constraint effects PY - 1995 SN - 0-8031-2013-3 VL - 2 IS - STP 1244 SP - 232 EP - 252 AN - OPUS4-34970 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klingbeil, Dietmar A1 - Moussavi Zadeh, Ghasem A1 - Eberle, Arno A1 - Fricke, S. A1 - Brocks, Wolfgang ED - Kirk, M. ED - Bakker, A. T1 - Numerical simulation of stable crack growth in fracture mechanics specimens KW - Crack propagation KW - Constraint KW - Semi-elliptical surface flaw KW - Finite element analysis KW - Modified J-concept KW - Triaxiality PY - 1995 SN - 0-8031-2013-3 IS - STP 1244 SP - 88 EP - 99 AN - OPUS4-34990 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfennig, Anja A1 - Schiz, J. A1 - Kranzmann, Axel ED - Jha, A. ED - Wang, C. ED - Neelameggham, N.R. ED - Guillen, D.P. ED - Li, L. ED - Belt, C.K. ED - Kirchain, R. ED - Spangenberger, J.S. ED - Johnson, F. ED - Gomes, A.J. ED - Pandey, A. ED - Hosemann, P. T1 - The role of austenitizing routines of pipe steels during CCS N2 - Properties of pipe steels for CCS technology require resistance against the corrosive environment of a potential CCS-site (heat, pressure, salinity of the aquifer, CO2-partial pressure). The influence of austenitizing in heat treatment routines of two different injection pipe steels (1.4034, X46Cr13 and 1.4021, X20Cr13) was evaluated. Steel coupons were austenitized at different temperatures (900 – 1050 °C) for different lengths of time (30–90 min) before quenching and annealing prior to long term corrosion experiments (60°C, 100 bar, artificial brine close to a CCS-site in the Northern German Basin, Germany). In general, fewer pits are found on X46Cr13. Comparing steels with 13% chromium each the higher carbon content of X46Cr13 (0.46% C) results in a lower number of pits compared to X20Cr13 (0.20% C). It is found that neither the carbon content of the steels nor austenitizing temperature has much influence, but local corrosion behaviour is most susceptible towards austenitizing time KW - Corrosion KW - CCS KW - Carbon storage KW - Aquifer KW - Austenitizing PY - 2015 SN - 978-1-119-08240-8 DO - https://doi.org/10.1002/9781119093220.ch15 SP - 131 EP - 137 PB - Wiley AN - OPUS4-34924 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tamberg, D. A1 - Thiele, D. A1 - Brodda, B. G. A1 - Lammertz, H. A1 - Coerdt, W. A1 - Mainka, E. A1 - Görgenyi, T. A1 - Stütz, A. A1 - Aigner, H. A1 - Deron, S. A1 - Kuhn, E. T1 - Evaluation of an interlaboratory comparison of the chemical assay of U, Th oxide coated particles PY - 1981 SN - 92-0-179081-3 N1 - Serientitel: IAEA safeguards – Series title: IAEA safeguards IS - 3 SP - 1 EP - 38 PB - IAEA CY - Wien AN - OPUS4-33362 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Trubiroha, Peter ED - Bagda, E. T1 - Der Einfluß des Klimas bei der Alterung polymerer Werkstoffe PY - 1985 SN - 3-924813-06-X SP - 7.1 EP - 7.7 PB - Techn. Akad. Esslingen CY - Esslingen AN - OPUS4-34052 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst A1 - Petersohn, Dieter A1 - Schwarz, Wolfram T1 - Oberflächenatlas - Rasterelektronenmikroskopische Aufnahmen und Profildiagramme PY - 1985 SN - 3-410-11863-2 SP - 95 EP - 153 PB - Beuth CY - Berlin AN - OPUS4-34179 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfennig, A. A1 - Wolthusen, Helmut A1 - Zastrow, Philip A1 - Kranzmann, Axel ED - Jha, A. ED - Wang, C. ED - Neelameggham, N.R. ED - Guillen, D.P. ED - Li, L. ED - Belt, C.K. ED - Kirchain, R. ED - Spangenberger, J.S. ED - Johnson, F. ED - Gomes, A.J. ED - Pandey, A. ED - Hosemann, P. T1 - Evaluation of heat treatment performance of potential pipe steels in CCS-environment N2 - To resist the corrosive geothermal environment during carbon capture and storage CCS -such as: heat, pressure, salinity of the aquifer, CO2-partial pressure, properties of pipe steels-require certain specification. For evaluation samples of differently heat treated high alloyed stainless injection-pipe steels AISI 420 X46Cr13, AISI 420J X20Cr13 as well as X5CrNiCuNb16–4 AISI 630 were kept at T=60 °C and ambient pressure as well as p=100 bar for 700 h up to 8000 h in a CO2-saturated synthetic aquifer environment similar to a possible geological situation in the northern German Basin. Corrosion rates and scale growth are lowest after long term exposure for steels hardened and tempered at 600 °C to 670 °C and pits -indicating local corrosion- decrease in diameter but increase in number as a function of carbon content of the steel. Martensitic microstructure is preferred with respect to these particular conditions. KW - Corrosion KW - CCS KW - Carbon storage KW - Aquifer KW - High temperature KW - High pressure PY - 2015 SN - 978-1-119-08240-8 DO - https://doi.org/10.1002/9781119093220.ch2 SP - 15 EP - 22 PB - Wiley AN - OPUS4-34717 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Anka A1 - Krause, Ulrich ED - Matthias Kühle-Weidemeier, T1 - Vermeidung der Selbstentzündung bei Deponiestoffen und Recyclingmaterialien T2 - 3. Praxistagung Deponie, Zwischenlager - Deponien - Nachsorge CY - Hannover, Deutschland DA - 2008-12-02 KW - Abfallstoffe KW - Recyclingstoffe KW - Brandverhütung KW - Selbstentzündung KW - Numerische Simulation KW - Solid wastes KW - Recycling materials KW - Fire prevention KW - Self-ignition KW - Numerical simulation PY - 2008 SN - 978-3-86727-801-0 SP - 36 EP - 47 PB - Cuvillier AN - OPUS4-18564 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wäsche, Rolf A1 - Klaffke, Dieter ED - Christophe Donnet, ED - Erdemir, Ali T1 - Tribology of DLC Films Under Fretting Conditions KW - DLC KW - Oscillation sliding KW - Counterbody KW - Relative humidity KW - Temperature KW - Lubrication PY - 2008 SN - 978-0-387-30264-5 SP - 362 EP - 382 PB - Springer Science + Business Media AN - OPUS4-18571 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hübert, Thomas A1 - Banach, Ulrich T1 - Validation of sensors for the determination of humidity in compressed gases N2 - Five miniaturized sensors based on dew-point, capacitance or resistance measurement were tested for the detection of humidity in compressed gases. The dew-point sensors with optical or dielectric detection of condensation were used at gas pressures up to 3 MPa in dew-point range of -20 to 70°C and show no systematic deviation and an uncertainty of dew-point temperature mostly less than 1 K. The LiCl sensor has also a low uncertainty but exhibit a systematic deviation to higher values of dew-point. Capacitive polymer sensors can indicate also a dew-point, even down to -70 °C and have an uncertainty of about 1 to 2 K. The oxide sensor works in the dew-point range of -10 to 20°C and has a signal what exponential decreases with increasing gas pressure up to 10 MPa. All types of sensor can be applied in compressed gases at least up to 3 MPa, but their different change of sensor signal due to the gas pressure has to be considered. T2 - 5th International Symposium on Humidity and Moisture (ISHM 2006 Brazil) CY - Rio de Janeiro, Brazil DA - 2006-05-02 KW - Pressure dew-point KW - Humidity sensor KW - Validation PY - 2006 SN - 978-85-86920-04-2 IS - Paper 110 SP - 1 EP - 5 AN - OPUS4-18578 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Christina A1 - Pavlovic, Mato A1 - Takahashi, Kazunori A1 - Ewert, Uwe A1 - Rosenthal, Martina A1 - Brekow, Gerhard A1 - Böhm, R. A1 - Ronneteg, U. A1 - Pitkänen, J. T1 - POD Evaluation of NDE Techniques for Canister-Components for Risk Assessment of Nuclear Waste Encapsulation T2 - 6th International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurised Components CY - Budapest, Hungary DA - 2007-10-08 KW - Zerstörungsfreie Prüfung KW - Zuverlässigkeit KW - POD PY - 2008 SN - 978-92-79-08897-1 DO - https://doi.org/10.2790/1274 SN - 1018-5593 SP - 168 EP - 179 AN - OPUS4-18589 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bruns, M. A1 - Raupach, M. A1 - Balzer, H. A1 - Gehlen, D. A1 - Noll, R. A1 - Wilsch, Gerd A1 - Taffe, Alexander ED - Susanne Gieler-Breßmer, T1 - Bildgebende Laseranalyse der Chlorid- und Sulfatverteilung in Beton T2 - 3. Kolloquium Verkehrsbauten - Schwerpunkt Parkhäuser/Brücken CY - Ostfildern, Deutschland DA - 2008-01-29 KW - LIBS KW - Beton KW - Alkali-Kieselsäure Reaktion KW - Tausalz KW - Ionen Transport PY - 2008 SN - 3-924813-72-8 IS - Tagungshandbuch 2008 SP - 1 EP - 6 AN - OPUS4-18654 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stoppel, Markus ED - Susanne Gieler-Breßmer, T1 - BetoScan - Selbstfahrendes Scannersystem für Betonflächendiagnosen T2 - 3. Kolloquium Verkehrsbauten - Schwerpunkt Parkhäuser/Brücken CY - Ostfildern, Deutschland DA - 2008-01-29 KW - BetoScan KW - Betonflächendiagnose KW - Scanner KW - ZfP im Bauwesen PY - 2008 SN - 3-924813-72-8 IS - Tagungshandbuch 2008 SP - 1 EP - 3 AN - OPUS4-18660 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfennig, Anja A1 - Kranzmann, Axel T1 - Influence of CO2 on the corrosion behaviour of 13%Cr martensitic stainless steel AISI 420 and low alloyed steel AISI 4140 exposed to saline aquifer water environment T2 - International Conference on Environment 2008 (ICENV 2008) - Environmental Management and Technologies Towards Sustainable Development CY - Penang, Malaysia DA - 2008-12-15 KW - Steel KW - Pipeline KW - Corrosion KW - Carbonate layer KW - CCS KW - CO2-injection KW - CO2-storage PY - 2008 SN - 978-983-3986-39-2 SP - 1 EP - 9 AN - OPUS4-18669 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Österle, Werner A1 - Kloß, Heinz A1 - Dmitriev, A.I. T1 - Modeling of Friction Evolution and Assessment of Impacts on Vibration Excitation at the Pad-Disc Interface T2 - 26th Annual Brake Colloquium & Exhibition CY - San Antonio, Texas, USA DA - 2008-10-12 KW - Friction materials KW - MCA-modeling KW - Friction films KW - Noise propensity KW - Friction-induced vibrations PY - 2008 SN - 978-0-7680-2097-7 IS - 2008-01-2582 SP - 303 EP - 311 AN - OPUS4-18695 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kohlhoff, Harald A1 - Subaric-Leitis, Andreas A1 - Ullner, Christian ED - Frenz, Holger ED - Grellmann, Wolfgang T1 - Standardmaschine für den Makrobereich der instrumentierten Eindringprüfung T2 - Tagung Werkstoffprüfung 2008 "Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung" CY - Berlin, Deutschland DA - 2008-12-04 KW - Instrumentierte Eindringprüfung KW - Härte KW - Kalibrierung KW - Rückführung PY - 2008 SN - 978-3-00-026399-6 SN - 1861-8154 N1 - Serientitel: DVM-Bericht – Series title: DVM-Bericht VL - 642 IS - 642 SP - 59 EP - 64 PB - DVM CY - Berlin AN - OPUS4-18613 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Biermann, E. A1 - Ermel, C. A1 - Hurrelmann, J. A1 - Ehrig, Karsten ED - Paolo Bottoni, ED - Mary Beth Rosson, ED - Mark Minas, T1 - Flexible visualization of automatic simulation based on structured graph transformation N2 - Visual modeling languages for discrete behavior modeling allow the modeler to describe how systems develop over time during system runs. Models of these languages are the basis for simulation with the purpose to validate the model with respect to its requirements. Graph transformation systems have shown to be suitable for the definition of various kinds of visual modeling languages. They define a modelpsilas operational semantics as the set of all transformations of a model which are specified by graph transformation rules. For automatic simulation, rules have to be structured to control their application order. During simulation, the state changes after each rule application should be visualized in the concrete syntax of the modeling language. In this paper, we propose a generic approach to specify simulation environments based on a modelpsilas concrete syntax definition and suitable rule structuring techniques. We implement our approach using TIGER, a tool for defining visual languages based on graph transformation, and generate the specified simulation environment as plug-in for ECLIPSE. We demonstrate our approach by a case study for automatic simulation of Rubikpsilas Clock, a mechanical two-sided puzzle of clocks controlled by rotating wheels. T2 - IEEE Symposium on Visual Languages and Human-Centric Computing (VL/HCC 2008) CY - Herrsching am Ammersee, Germany DA - 2008-09-15 PY - 2008 SN - 978-1-4244-2528-0 DO - https://doi.org/10.1109/VLHCC.2008.4639053 SN - 1943-6092 SP - 21 EP - 28 AN - OPUS4-18617 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molkenthin, André A1 - Wilsch, Gerd ED - Susanne Gieler-Breßmer, T1 - Alkalimetalle - der gefährliche Partner der Chloride, neueste Erkenntnisse über Kationen aus Taumitteln T2 - 3. Kolloquium Verkehrsbauten - Schwerpunkt Parkhäuser/Brücken CY - Ostfildern, Deutschland DA - 2008-01-29 KW - LIBS KW - Beton KW - Alkali-Kieselsäure Reaktion KW - Tausalz KW - Ionen Transport PY - 2008 SN - 3-924813-72-8 IS - Tagungshandbuch 2008 SP - 1 EP - 6 AN - OPUS4-18633 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molkenthin, André A1 - Weritz, Friederike A1 - Schaurich, Dieter A1 - Wilsch, Gerd T1 - Imaging of cation and anion transport in building materials by laser-induced breakdown spectroscopy T2 - 5th International Essen Workshop "Transport in Concrete - Nanostructure and Macrostructure" (TRANSCON 07) CY - Essen, Deutschland DA - 2007-06-11 KW - LIBS KW - Beton KW - Alkali-Kieselsäure Reaktion KW - Tausalz KW - Ionen Transport PY - 2007 SN - 978-3-931681-88-3 SP - 117 EP - 126 PB - Aedificatio Verl. CY - Essen AN - OPUS4-18634 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weritz, Friederike A1 - Taffe, Alexander A1 - Schaurich, Dieter A1 - Wilsch, Gerd T1 - Visualization of chloride and sulfate ingress into concrete by element distributions and depth profiles determined with laser-induced breakdown spectroscopy (LIBS) T2 - 5th International Essen Workshop "Transport in Concrete - Nanostructure and Macrostructure" (TRANSCON 07) CY - Essen, Deutschland DA - 2007-06-11 KW - Laser induced breakdown spectroscopy KW - Concrete KW - Chloride KW - Sulphate KW - Depth profile PY - 2007 SN - 978-3-931681-88-3 SP - 149 EP - 158 PB - Aedificatio Verl. CY - Essen AN - OPUS4-18635 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Kreutzbruck, Marc T1 - Durchschallung von Textilien zum Nachweis verdeckter, nichtmetallischer Gegenstände T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung CY - St. Gallen, Schweiz DA - 2008-04-28 PY - 2008 SN - 978-3-940283-09-2 IS - (Poster 48) SP - 1 EP - 8 AN - OPUS4-18789 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Westin, E. M. A1 - Stelling, Karen A1 - Gumenyuk, Andrey ED - P. Mayr, ED - G. Posch, ED - H. Cerjak, T1 - Single-Pass Laser-GMA Hybrid Welding of 13.5 mm Thick Duplex Stainless Steel N2 - Single-pass solid-state laser welding of plates in the thickness range of 10 to 20 mm became possible with the invention of the fibre laser. This new technique provides excellent beam quality at powers as high as 20 kW or more, and has proved applicable in several industrial applications. By replacing conventional methods with the fibre laser, it is possible to avoid multiple-pass welding that requires time-consuming bevelling. The high energy density of the fibre laser beam also reduces the heat input and consequently the distortion. However, the rapid solidification and cooling associated with laser welding can cause imbalance of the microstructure of duplex stainless steel weldments, where excessively high ferrite contents may reduce the corrosion resistance and the ductility of the material. The solution is normally to add nickel-based filler wire and to increase the heat input. By using a hybrid welding process where the laser beam and the gas metal arc (GMA) process act in a common process zone, filler metal can be added to the molten pool at higher heat input and at the same time, higher welding speed and deeper penetration can be achieved. In this work, 13.5 mm thick 2205 (EN 1.4462, UNS S31803) was fibre laser-GMA hybrid welded in a single-pass using 14 kW of laser power and 2209 (ISO 22 9 3 L N) as filler wire for the GMA process. The resulting welds were free from defects, with smooth surfaces and full penetration. The investigation examines the weld metal microstructure and the effect on corrosion resistance and mechanical properties. The option to add nickel foil when hybrid welding was also investigated as comparison and the effect on austenite formation was evaluated. T2 - 61st Annual Assembly and International Conference of the International Institute of Welding (IIW) "Safety and Reliability of Welded Components in Energy and Processing Industry" CY - Graz, Austria DA - 2008-07-06 KW - Duplex stainless srteel KW - Welding KW - Laser welding KW - Laser hybrid welding KW - Weldability KW - Austenite formation KW - Weld metal KW - Corrosion resistance KW - EMPA PY - 2008 UR - http://www.iiw-iis.org/iiw/extranet/static/Ms/C-IV/IV-963-08-Single-Pass-Laser-Gma-Hybrid-Welding.pdf SN - 978-3-85125-019-0 IS - IIW Doc.-No. IV-963-08 SP - 1 EP - 13 PB - Verlag der Technischen Universität Graz CY - Graz, Austria AN - OPUS4-18705 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Günzel, Stephan A1 - Trappe, Volker ED - Frenz, Holger ED - Grellmann, Wolfgang T1 - Ermittlung bruchmechanischer Kennwerte an Epoxid-Harzen T2 - Tagung Werkstoffprüfung 2008 "Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung" CY - Berlin, Deutschland DA - 2008-12-04 KW - Rissfortschritt KW - Risszähigkeit KW - Epoxid-Harz KW - Crack growth KW - Fracture toughness KW - Epoxy resin PY - 2008 SN - 978-3-00-026399-6 SN - 1861-8154 N1 - Serientitel: DVM-Bericht – Series title: DVM-Bericht VL - 642 IS - 642 SP - 295 EP - 300 PB - DVM CY - Berlin AN - OPUS4-18778 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gradt, Thomas A1 - Aßmus, Kristin T1 - Tribological Behaviour of Solid Lubricants at Low Temperatures N2 - Supporting elements between large superconducting magnets like the field coils in WENDELSTEIN 7-X have to sustain high loads while allowing a certain amount of tangential movement without any stick-slip motion. In model tests with reciprocating friction in liquid helium and vacuum a PVD-MoS2-coating has proven its suitability for these components. It showed a very stable sliding behaviour with a friction coefficient below 0.1 without coating failure under all test conditions. KW - Tribologie KW - Festschmierstoffe KW - MoS2 KW - Kryotechnik KW - Vakuumtechnik KW - Kernfusion PY - 2006 SN - 978-80-239-8883-3 VL - 1 SP - 173 EP - 176 CY - Prague, Czech Republic AN - OPUS4-17398 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Torge, Manfred ED - Ulrich Knefelkamp, ED - Frank Martin, T1 - Untersuchungen zur chemischen Zusammensetzung von mittelalterlichen Glasproben - Vergleich der Analysenergebnisse von mittelalterlichen Gläsern aus der St. Marienkirche Frankfurt (Oder) mit denen anderer Provenienz KW - Glasmalerei KW - Glasanalysen PY - 2008 SN - 978-3-361-00638-6 SP - 190 EP - 196 CY - Leipzig AN - OPUS4-17362 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molnarne, Maria A1 - Schröder, Volkmar T1 - Chemical safety database - application for flammability limits of biogases T2 - 2008 AIChE Spring National Meeting CY - New Orleans, LA, USA DA - 2008-04-06 KW - Explosion limit KW - Biogas KW - CHEMSAFE KW - Flammability limit KW - Explosion protection KW - Renewable energy PY - 2008 SN - 978-0-8169-1023-6 N1 - Serientitel: P / AIChE, American Institute of Chemical Engineers – Series title: P / AIChE, American Institute of Chemical Engineers IS - 247 SP - 1 EP - 11 PB - AIChE CY - New York AN - OPUS4-17367 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Burkert, Andreas A1 - Fischer, Joachim A1 - Zietelmann, Christina A1 - Lehmann, Jens T1 - Verhalten nichtrostender Stähle bei atmosphärischer Korrosionsbelastung - Typische Beispiele aus der Praxis T2 - 3-Länder-Korrosionstagung - "Korrosion nichtrostender Stähle - Auf die Oberfläche kommt es an!" CY - Wien, Österreich DA - 2008-04-24 KW - Lagerung KW - Werkstoffauswahl KW - Konstruktion KW - Lieferzustand KW - Verarbeitung KW - Nachbehandlung KW - Reinigung und Pflege PY - 2008 SN - 978-3-935406-35-2 SP - 55 EP - 63 AN - OPUS4-17437 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stegemann, Bert A1 - Backhaus, Henrik A1 - Kloß, Heinz A1 - Santner, Erich ED - Méndez-Vilas, A. ED - J. Diaz, T1 - Spherical AFM Probes for Adhesion Force Measurements on Metal Single Crystals KW - Atomic force microscopy KW - Force distance curves KW - Adhesion force KW - Ultrahigh vacuum KW - Silver KW - Copper KW - Antimony PY - 2007 SN - 978-84-611-9420-9 VL - 2 SP - 820 EP - 827 CY - Badajoz, Spain AN - OPUS4-17400 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Trela, Christiane A1 - Wöstmann, Jens A1 - Kruschwitz, Sabine ED - Carlos Brebbia, T1 - Contribution of radar measurements to the inspection and condition assessment of railway bridges - case study at a historic masonry arch bridge in Olesnica/Poland N2 - Ground Penetration Radar (GPR) as a non-destructive (NDT)-method can be applied to obtain detailed information about the inner structure and condition of bridges without damaging the structure. In this paper the capabilities and limitations of the application of the fast inspection technique GPR will be demonstrated. In addition to GPR investigations, geoelectrical measurements, coring and petrophysical investigations have been carried out. The investigated railway bridge in Olesnica is a typical European masonry arch bridge (age, construction and span length). It shows typical damage to the masonry arches such as increasing salt concentration, destruction, material losses and longitudinal cracks. Radar measurements were carried out with two main objectives: (1) Identification of basic geometric dimensions of the bridge and identification of construction details; (2) Evaluation of the condition of the masonry, such as mechanical damage (e.g. cracks) or variation of the moisture content. Radar antennas of different frequencies (having different penetration depths) have been used to estimate the thickness of the walls. Because of the high attenuation in the inner masonry structure the measurements have not produced satisfying results, but the radar measurements have been successfully applied to investigate the moisture distribution in the masonry. These results have been verified by coring and through geoelectrical measurements. Cracks were studied at two testing areas at one wing wall of the bridge using an automatic 2D radar scanning system. The radar data were processed using advanced data processing tools like FT-SAFT reconstruction and data fusion. The processing sequence allowed the creation of high-resolution depth sections (C-Scans). KW - Ground Penetration Radar KW - Spectral induced polarization KW - Coring KW - Railway bridge KW - Non-destructive testing method KW - Condition assessment PY - 2008 SN - 978-1-84564-106-1 DO - https://doi.org/10.2495/HPSM080541 SN - 1743-3509 VL - 97 SP - 535 EP - 544 PB - WIT Press CY - Ashurst, Southampton, UK AN - OPUS4-17745 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tzschichholz, Grit A1 - Steinborn, Gabriele A1 - Keller, M.H. A1 - Manara, J. T1 - Porous nano-composite materials with low emittance for reducing energy consumption T2 - Nanofair 2008 - New Ideas for Industry / 6th International Nanotechnology Symposium CY - Dresden, Germany DA - 2008-03-11 PY - 2008 SN - 978-3-18-092027-6 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 2027 SP - 231 EP - 235 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-17746 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bien, J. A1 - Kaminski, T. A1 - Trela, Christiane ED - Hyun-Moo Koh, ED - Dan M. Frangopol, T1 - Numerical analysis of old masonry bridges supported by field tests T2 - Bridge Maintenance, Safety, Management, Health Monitoring and Informatics - IABMAS 2008 CY - Seoul, South Korea DA - 2008-07-13 PY - 2008 SN - 978-0-415-46844-2 SP - 2384 EP - 2391 PB - CRC Press CY - Boca Raton AN - OPUS4-17749 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomas, Hans-Martin A1 - Dey, Anika A1 - Pohl, Rainer A1 - Heyder, R. A1 - Krull, R. A1 - Dilz, K. T1 - Früherkennung von Rollkontakt-Ermüdung (RCF) in Eisenbahnschienen N2 - Infolge der Betriebsbeanspruchung unterliegen Eisenbahnschienen an ihrer Fahrkante sog. Rollkontakt-Ermüdung. Diese entsteht bevorzugt in Bögen durch eine Kaltverformung des Schienenstahls und zeigt sich anfänglich in einer erhöhten Verfestigung des kontaktbeanspruchten Oberflächenbereichs. Im weiteren Verlauf entstehen zahlreiche, flach in das Schieneninnere verlaufende Risse –sog. Head Checks. Diese Risse neigen ab einem gewissen Stadium dazu, in das Innere der Schiene abzukippen, was im Endstadium zu einem Schienenbruch führen kann. Seit einigen Jahren wird in Deutschland bei der DB AG das Wirbelstromverfahren erfolgreich zur zerstörungsfreien Prüfung der Schädigungstiefe von Head Checks eingesetzt. Hiermit wurde u. A. angestrebt, zuverlässige Planungsgrößen für den Einsatz von Instandhaltungsmaßnahmen zu erhalten, durch deren gezielten Einsatz ein weiteres Risswachstum wirkungsvoll unterbunden werden kann. Bereits bei einem der ersten systematischen Einsätze der Wirbelstromprüfung an einer Bogenstrecke mit hohem Betriebsaufkommen wurde auffällig, dass die Ermüdungsrisse nicht gleichmäßig entlang des Bogens verteilt auftraten, sondern sich auf kurze Distanzen Anhäufungen von Rissbefall mit intakten, unbefallenen Abschnitten abwechselten. Solch wellenförmiges Auftreten von Head Checks wurde auch in den nachfolgenden Prüfergebnissen der Wirbelstromprüfung vielerorts beobachtet. Aus der Literatur war bekannt, dass sich die Ermüdungsrisse bevorzugt in verfestigten Materialzonen bilden. Mit Hilfe von Härtemessungen konnte an verlegten und befahrenen Schienen gezeigt werden, dass die unbefallenen Zonen etwa die Grundhärte des Schienenwerkstoffes aufwiesen, während die mit Ermüdungsrissen befallenen Zonen um ca. 10 – 25% erhöhte Härtewerte aufwiesen. Die Wirbelstromprüfung reagiert sehr empfindlich auf Veränderungen der Materialeigenschaften. Somit lassen sich Verfestigungen der o. g. Art leicht auch ohne jedes Vorhandensein von Ermüdungsrissen bereits nachweisen. Im Zuge einer längerfristigen Beobachtung einer neu gebauten Strecke konnte herausgefunden werden, dass sich nach einer gewissen Betriebszeit wellenförmig verteilte Zonen mit Prüfsignalen, die auf Verfestigungen schließen lassen auftraten. Im weiteren zeitlichen Ablauf bildeten sich Ermüdungsrisse tatsächlich in den vorher bestimmten Stellen mit Verfestigung, während die Zonen ohne diese Prüfsignale weitgehend rissfrei blieben. Diese Ergebnisse zeigen, dass die Wirbelstromprüfung das Potential besitzt, mögliche Orte der Entstehung von Ermüdungsrissen in einem extrem frühzeitigen Stadium nachzuweisen. T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung CY - St. Gallen, Schweiz DA - 2008-04-28 KW - Wirbelstromprüfung KW - Rollkontaktermüdung KW - Head Checks KW - Eisenbahnschiene KW - Kaltverfestigung PY - 2008 SN - 978-3-940283-09-2 IS - DGZfP-BB-113 (Mi.3.A.1.) SP - 501 EP - 510 AN - OPUS4-17982 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schenk, Gottfried A1 - Brackrock, Daniel A1 - Gerken, C. A1 - Beuth, T. T1 - Entwicklungsstand bei der Ultraschallprüfung von Radsatz-Vollwellen mit Gruppenstrahlern - Umsetzung der gewonnenen Betriebserfahrungen N2 - Bei der laufenden Instandhaltung der Schienenfahrzeuge werden die Radsätze auf Fehlerfreiheit geprüft. Dabei werden sowohl die Laufräder wie auch die Radsatzwellen einer zerstörungsfreien Prüfung mit Ultraschall unterzogen. Im Fahrzeuginstandhaltungswerk Wittenberge der DB AG wurde im Jahre 2001 die bisher eingesetzte Handprüfung bzw. eine teilmechanisierte Prüfung mit konventioneller Technik durch eine mechanisierte automatische Prüfung mit Ultraschall-Gruppenstrahlertechnik abgelöst. Es werden Radsatz-Vollwellen von klotzgebremsten Güterwagen, die neben den beiden Radsitzen keine Querschnittsübergänge aufweisen, und Vollwellen von scheibengebremsten Personenzügen mit bis zu 3 Bremsscheiben geprüft. Dabei sind unterschiedliche Bauarten und Geometrien zu berücksichtigen und auf radiale Fehler (Oberflächenrisse) zu untersuchen, die ab einer Tiefe von 2 mm und einer Ausdehnung von 20 mm mit einem Signal-Rausch-Abstand von mindestens 6 dB nachzuweisen sind. Aufgrund der vorliegenden Betriebserfahrungen wurde im Jahre 2007 eine Erweiterung in Angriff genommen. Bei Radsatz-Vollwellen ohne Bremsscheiben musste der Prüfumfang, der sich bisher auf Wellenschenkel, Notlauf und die Querschnittsübergänge am Radsitz beschränkte, auf den gesamten Längenbereich ausgedehnt werden. Dies unter der Vorgabe, lediglich die bereits installierten 4 Gruppenstrahler-Prüfköpfe von 4 festen Einschallpositionen aus in 2 Prüfschritten einzusetzen. Zusätzlich verringerte sich die Längenausdehnung der geforderten Fehlergröße auf 15 mm. Erfahrungen bei der Prüfung von Radsatz-Vollwellen unterschiedlicher Bauarten und Baujahre machten zusätzlich eine Justierfunktion bzw. einen Empfindlichkeitsausgleich erforderlich. Vor allem bei älteren Bauarten treten hohe Empfindlichkeitsschwankungen auf, die durch eine automatisierte Verstärkungsanpassung kompensiert werden müssen. Hierzu wird während des Prüfablaufs die Schallschwächung ermittelt, deren Ergebnis in automatisierter Form in die Befunderstellung mit einfließt. Der Beitrag stellt darüber hinaus die Herausforderung dar, die Umrüstarbeiten innerhalb des laufenden Betriebs durchzuführen bzw. die notwendigen Stillstandszeiten auf ein Minimum zu beschränken. T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung CY - St. Gallen, Schweiz DA - 2008-04-28 KW - Eisenbahn-Radsatz-Vollwellenprüfung KW - Gruppenstrahlertechnik KW - COMPAS-Prüfsystem KW - Empfindlichkeitskorrektur durch V-Durchschallung PY - 2008 SN - 978-3-940283-09-2 IS - DGZfP-BB-113 (Mi.3.A.3.) SP - 512 EP - 518 AN - OPUS4-17984 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gohlke, Dirk A1 - Matthies, Klaus A1 - Trieb, G. T1 - Ultraschallprüfung von Rohlingen für rundlaufende Hochleistungs-Werkzeuge mit wendelförmigen Kühlkanälen N2 - Rundlaufende Hochleitungs-Werkzeuge mit wendelförmigen Kühlkanälen, wie Bohrer und Fräser, bestehen aus pulvermetallurgisch hergestelltem Hartmetall. Bei diesem Herstellungsprozess wird die Formmasse in einem sehr plastischen Zustand durch spezielle Schneckenstrang-Pressen, in denen sich auch die Formungsteile für die Kühlkanäle befinden, gedrückt. Bedingt durch diesen Herstellungsprozess der Rohlinge, können an der Oberfläche und, was besonders unangenehm ist, auch an den Kühlkanälen kleine Risse entstehen, die die Festigkeit bzw. Haltbarkeit des Werkzeuges herabsetzen. Daher werden die Rohlinge mit Ultraschall geprüft. Diese Prüfung kann bei größeren Wanddicken (größer 10-12 mm) und max. 2 Kühlkanälen noch mit "normalen" Ultraschall-Prüfgeräten in einem Tauchbecken erfolgen, wobei der Prüfkopf mit einer ausreichenden Wasservorlaufstrecke über den sich drehenden Rohling geschoben wird. Wird der Durchmesser des Rohlings kleiner oder besitzt er mehr als 2 Kühlkanäle, ist es für den Prüfer nicht mehr möglich, Fehler- von Formanzeigen zu unterscheiden. Abhilfe bieten in diesem Fall die bildgebenden Ultraschall-Techniken, wie z. B. der Volumenscan. Der Volumenscan ist ein um eine zusätzliche Koordinate erweitertes B- oder TDBild. Daher ist er in seiner Gesamtheit auch nur 3-dimensional darstellbar, oder, was bezogen auf die Auswertung große Vorteile bringt, die 2-dimensionalen Bilder der zusätzlichen Koordinate werden in einer Art Videosequenz durchgescrollt. Die aufgenommenen Amplituden sind farbcodiert. Die Wirkungsweise des Volumenscans wird am Beispiel der Prüfung von Hartmetall-Rohlingen mit wendelförmigen Kühlkanälen für Hochleistungswerkzeuge gezeigt und erläutert. T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung CY - St. Gallen, Schweiz DA - 2008-04-28 KW - Mechanische Ultraschallprüfung KW - Volumenscan KW - Komplizierte Geometrie KW - Hartmetall KW - Bildhafte Auswertung PY - 2008 SN - 978-3-940283-09-2 IS - DGZfP-BB-113 (Di.2.B.3.) SP - 1 EP - 7 AN - OPUS4-17986 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dey, Anika A1 - Pohl, Rainer A1 - Thomas, Hans-Martin A1 - Meierhofer, R. T1 - Optimierte Schieneninstandhaltung durch Wirbelstromprüfung N2 - Betriebsbedingte Oberflächenschäden an Schienen, insbesondere rissartige Ungänzen wie Head Checks, Squats und Belgrospis spielen bei der Gewährleistung der Sicherheit des Fahrbetriebes eine zunehmend wichtige Rolle. Bei ungehindertem Wachstum können diese Schäden bis zum Schienenbruch führen. Um dies zu verhindern, werden diese Oberflächenschädigungen im Anfangsstadium durch Abarbeiten der Schienen beseitigt. Häufig werden hierfür Schienenschleifzüge eingesetzt. Für die effektive Planung dieser Instandhaltungsmaßnahmen wurde ein Wirbelstromprüfsystem entwickelt, welches in der Lage ist, speziell für den Fehlertyp Head Checks, eine Risstiefenbestimmung durchzuführen. Dieses wird seit einiger Zeit bei der manuellen Prüfung (WPG – Wirbelstromprüfgerät) und bei der Prüfung mit Schienenprüfzügen erfolgreich eingesetzt. Das Wirbelstromprüfsystem wurde so modifiziert, dass es in einem Schleifzug der Firma SPENO INTERNATIONAL SA integriert werden konnte. Hierüber wurde bereits berichtet (u.a. DACH-Tagung 2004 in Salzburg; ECNDT 2006 Berlin). Der Betrieb im Schleifzug ist für die Weiterentwicklung des Prüfsystems von herausgehobener Bedeutung, da anhand des tatsächlich erzeugten Materialabtrages eine laufende Verifikation der Prüfaussagen erfolgen kann. Für die Instandhaltungsmaßnahme ergibt sich durch das integrierte Prüfsystem der Vorteil, während bzw. unmittelbar nach Abschluss der Arbeiten eine objektive Dokumentation über das erzielte Schleifergebnis erstellen zu können. Inzwischen sind einige Schleifzüge mit dem System ausgerüstet worden. Anhand von Ergebnissen ausgewählter Schleifeinsätze werden die Aspekte für die Optimierung der Schieneninstandhaltungsmaßnahmen, sowie auch für die Weiterentwicklung des Prüfsystems selbst vorgestellt. T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung CY - St. Gallen, Schweiz DA - 2008-04-28 KW - Wirbelstromprüfung KW - Rollkontaktermüdung KW - Head Checks KW - Eisenbahnschiene KW - Schieneninstandhaltung PY - 2008 SN - 978-3-940283-09-2 IS - DGZfP-BB-113 (Poster P7) SP - 618 EP - 622 AN - OPUS4-17987 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Völz, Uwe A1 - Mrasek, Heinz A1 - Matthies, Klaus T1 - Untersuchungen zur Schallausbreitung in anisotropen Schweißverbindungen von Nickellegierungen mit Hilfe der Visualisierung von Schallfeldern mit elektrodynamischen Sonden N2 - In der jüngeren Vergangenheit wurden verschiedene Verfahren vorgestellt, um Schallfeldverläufe in Festkörpern messtechnisch zu erfassen und in anschaulicher Form darzustellen. Hier soll ein Verfahren mit elektrodynamischen Sonden vorgestellt werden, das sich durch einfache Handhabung und einen hohen Signal-Rausch-Abstand auszeichnet. Es ermöglicht, das streifende Schallfeld an der Oberfläche von Festkörpern aus beliebigem Material als Amplituden-Zeit-Funktion abzutasten, wobei die Teilchenauslenkungen in allen drei Raumrichtungen erfasst werden können. Am Beispiel einer anisotropen Engspaltschweißnaht zwischen Chromstahl und einer Nickellegierung (Alloy617) wird die Leistungsfähigkeit dieses Verfahrens demonstriert. Die Messmethode erlaubt es, die Wellenausbreitung durch die Schweißnaht sichtbar zu machen und das Reflexions- und Streuverhalten an den anisotropen Strukturen sowie an eingebrachten Testfehlern zu zeigen. Ziel dieser Entwicklung ist es, die Schallausbreitung in Festkörpern, insbesondere in solchen mit akustisch anisotropen Eigenschaften, besser zu verstehen, die vorhandenen Modellvorstellungen zu verifizieren und die Prüfmethoden zu optimieren bzw. weiterzuentwickeln. T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung CY - St. Gallen, Schweiz DA - 2008-04-28 KW - Elektrodynamische Sonde KW - Visualisierung KW - Schallfeld KW - Ultraschall KW - Engspaltschweißnaht KW - Nickellegierung PY - 2008 SN - 978-3-940283-09-2 IS - DGZfP-BB-113 (Poster P18) SP - 672 EP - 681 AN - OPUS4-17989 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Wöstmann, Jens A1 - Trela, Christiane A1 - Röllig, Mathias ED - L. Binda, ED - M. di Prisco, ED - R. Felicetti, T1 - Investigation of moisture content and distribution with radar and active thermography T2 - 1st International RILEM Conference, on Site Assessment of Concrete, Masonry and Timber Structures (SACoMaTiS 2008) CY - Varenna, Italy DA - 2008-09-01 KW - Radar KW - Active thermography KW - Non-destructive testing KW - Moisture KW - Masonry PY - 2008 SN - 978-2-35158-062-2 VL - 1 IS - PRO 59 SP - 411 EP - 420 PB - RILEM Publications AN - OPUS4-18032 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Krause, Martin A1 - Wöstmann, Jens A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Streicher, Doreen A1 - Kohl, C. ED - L. Binda, ED - M. di Prisco, ED - R. Felicetti, T1 - Influence of concret properties on the calibration of radar, ultrasonics and active thermography T2 - 1st International RILEM Conference, on Site Assessment of Concrete, Masonry and Timber Structures (SACoMaTiS 2008) CY - Varenna, Italy DA - 2008-09-01 KW - Concrete KW - Radar KW - Ultrasonics KW - Active thermography KW - Velocity calibration PY - 2008 SN - 978-2-35158-062-2 VL - 1 IS - PRO 59 SP - 15 EP - 24 PB - RILEM Publications AN - OPUS4-18033 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - McInerney, T.-J. A1 - Madigan, R.B. A1 - Xu, Ping A1 - Cross, Carl Edward ED - Stan A. David, ED - Tarasankar DebRoy, ED - John C. Lippold, ED - Herschel B. Smartt, ED - John M. Vitek, T1 - Achieving grain refinement through weld pool oscillation T2 - 7th International Conference on Trends in Welding Research CY - Pine Mountain, GA, USA DA - 2005-05-16 KW - Aluminium Alloy KW - Grain Refinement KW - Weld Pool Oscillation KW - Frequency Amplitude Range KW - Alloy 2219 PY - 2006 SN - 978-0-87170-842-7 SP - 17 EP - 22 PB - ASM International CY - Materials Park, Ohio AN - OPUS4-18040 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Gehlen, C. T1 - Bedarfsgerechte Kriterien zur zuverlässigen Ortung von Minderdicken in Tunnelinnenschalen T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung CY - St. Gallen, Schweiz DA - 2008-04-28 KW - NDT KW - Laser-induced Breakdown Spectroscopy KW - Quality assurance KW - Damage analysis KW - Concrete repair KW - Chloride KW - Sulphate PY - 2008 SN - 978-3-940283-09-2 IS - DGZfP-BB-113 (Poster 53) SP - 1 EP - 8 AN - OPUS4-17999 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gardei, André A1 - Garcia, O. A1 - Riedl, Martin A1 - Vanhellemond, I. A1 - Suput, J.S. A1 - Santarelli, M.-L. A1 - Rodríguez-Maribona, I. A1 - Müller, Urs ED - Jadwiga W. Lukaszewicz, ED - Piotr Niemcewicz, T1 - Performance and durability of a new antigraffiti system for cultural heritage - the EC project GRAFFITAGE T2 - 11th International Congress on Deterioration and Conservation of Stone CY - Torun, Poland DA - 2008-09-15 KW - Cultural heritage KW - Antigraffiti system KW - Sandstone KW - Limestone KW - Brick KW - Monument KW - Cleaning KW - Historische Baustoffe PY - 2008 SN - 978-83-231-2237-1 VL - II SP - 889 EP - 897 PB - Nicolaus Copernicus University Press CY - Torun, Poland AN - OPUS4-18844 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dmitriev, A.I. A1 - Österle, Werner T1 - Numerical modeling of dry friction sliding in pad-disc interface at the nanoscale T2 - 37th Summer school-conference - Advanced problems in mechanics (APM 2009) CY - St. Petersburg, Russia DA - 2009-06-30 PY - 2009 SN - 978-5-91339-029-5 SP - 174 EP - 182 AN - OPUS4-19750 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Martin, Tina ED - Odile Abraham, ED - Dérobert, Xavier T1 - Complex resistivity (CR) of wood and standing trees N2 - Complex resistivity (CR) has been used to investigate the properties and the extent of damage in wood and standing trees. Our laboratory experiments have proved that wood´s anisotropy influences its electrical behaviour. It is a well-established fact that wood exhibits the lowest resistivity amplitudes in the axial direction compared to that in tangential and radial directions. It has been shown that anisotropy affects not only the amplitude but also the phase. Phase values are the highest in the axial direction, particularly in the lower frequency range. The changes in resistivity due to fungi-induced damage were investigated in a long-term laboratory test. With progressing damage, both resistivity and phase decrease. The phase also shows sensitivity to the changes in the structure of wood cell. CR Tomography (CRT) has been employed in the field to detect fungi-infected zones in fallen trees. A number of factors such as the type and age of the tree, and the season seem to influence the CRT results. Among those, the effect of seasonal changes has been demonstrated here. Furthermore CRT can be used to characterise fungi-infected zones in the tree. T2 - NDTCE `09 - 7th international symposium on non destructive testing in civil engineering CY - Nantes, France DA - 2009-06-30 KW - Tree investigation KW - Complex resistivity tomography KW - Wood anisotropy KW - Fungi KW - Oak PY - 2009 SN - 978-2-7208-2542-5 SN - 1628-4704 IS - Paper 77 SP - 963 EP - 968 AN - OPUS4-19707 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Wöstmann, Jens A1 - Milmann, Boris A1 - Hennen, C. ED - Karl-Eugen Kurrer, ED - Lorenz, Werner ED - Volker Wetzk, T1 - Structural assessment of stone walls of St. Servatius church in Quedlinburg N2 - Non-destructive and minor destructive testing methods enable a classification of historic structures, building processes, applied building technologies and materials. Therefore, these methods should be part of the global investigation of historic buildings which is usually required before the planning of any building intervention. The case study presented herein encompasses experimental work carried out at the St. Servatius Church in Quedlinburg, Germany. Within a comprehensive restoration campaign, non-destructive on-site investigations were carried out with radar and ultrasonics. The results were combined with plans, views and cores recorded in advance. T2 - 3rd International congress on construction history CY - Cottbus, Germany DA - 2009-05-20 KW - Non-destructive testing KW - Radar KW - Ultrasonic KW - Stone KW - Masonry PY - 2009 SN - 978-3-936033-31-1 VL - 2 SP - 983 EP - 990 PB - NEUNPLUS1 - Verlag und Service GmbH AN - OPUS4-19741 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Wöstmann, Jens A1 - Röllig, Mathias A1 - Köpp, Christian A1 - Borchardt, Kerstin ED - Mateja Golez, T1 - Non-destructive testing of walls and ground of the Carthusian monastery at Zice KW - Non-destructive testing KW - Active thermography KW - Radar KW - Brick KW - Stone KW - Masonry PY - 2009 SN - 978-961-90366-4-8 SP - 101 EP - 117 CY - Ljubljana, Slovenia AN - OPUS4-19742 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rücker, Werner A1 - Said, Samir A1 - Schmid, Wolfgang A1 - Rohrmann, Rolf T1 - Zustandsüberwachung der Gärtnerplatzbrücke in Kassel unter Verwendung gemessener Einflusslinien T2 - 3. VDI-Fachtagung - Baudynamik CY - Kassel, Deutschland DA - 2009-05-14 KW - Schadensanalyse KW - Neigungseinflusslinie KW - Fußgängerbrücke KW - Ultrahochfester Beton PY - 2009 SN - 978-3-18-092063-4 SN - 0083-5560 VL - 2063 SP - 81 EP - 91 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-19861 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Simone ED - Heinz Luck, ED - Ingolf Willms, T1 - Smoke gas analysis by Fourier transform infrared spectroscopy T2 - AUBE ´09 - 14th International conference on automatic fire detection CY - Duisburg, Germany DA - 2009-09-08 KW - Smoke gase KW - FTIR KW - Polymer KW - SBI KW - Brandschacht KW - DIN tube furnace PY - 2009 SN - 978-3-940402-01-1 VL - 1 SP - 165 EP - 172 CY - Duisburg, Germany AN - OPUS4-19848 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfennig, Anja A1 - Kranzmann, Axel ED - C.A. Brebbia, ED - V. Popov, T1 - Influence of CO2 on the corrosion behaviour of 13Cr martensitic stainless steel AISI 420 and low-alloyed steel AISI 4140 exposed to saline aquifer water environment T2 - 17th International Conference on Modelling, Monitoring and Management of Air Pollution CY - Tallinn, Estonia DA - 2009-07-20 KW - Steel KW - Pipeline KW - Corrosion KW - CCS KW - Carbon capture KW - CO2-injection PY - 2009 SN - 978-1-84564-195-5 DO - https://doi.org/10.2495/AIR090371 SN - 1746-448X SN - 1746-3541 VL - 123 SP - 409 EP - 418 PB - WIT Press AN - OPUS4-19783 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Liehr, Sascha A1 - Lenke, Philipp A1 - Wendt, Mario A1 - Krebber, Katerina A1 - Glötzl, R. A1 - Schneider-Glötzl, J. A1 - Gabino, L. A1 - Krywult, L. ED - Bernadette Havranek, ED - Masoud Motavalli, ED - Urs Meier, T1 - Distributed polymer optical fiber sensors in geotextiles for monitoring of earthwork structures T2 - 4th International conference on structural health monitoring of intelligent infrastructure CY - Zurich, Switzerland DA - 2009-07-22 KW - Distributed sensor KW - Optical fiber sensor KW - Geotextile KW - Technical textile KW - POF sensor KW - Structural health monitoring KW - SHM KW - OTDR KW - Fiber optic sensors KW - Polymer optical fibers (POF) KW - Strain sensor PY - 2009 SN - 978-3-905594-52-2 IS - Paper 520 SP - 1 EP - 7(?) CY - Zurich, Switzerland AN - OPUS4-19787 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Liehr, Sascha A1 - Wendt, Mario A1 - Krebber, Katerina A1 - Münich, J.C. A1 - Stempniewski, L. A1 - Metschies, H. ED - Bernadette Havranek, ED - Masoud Motavalli, ED - Urs Meier, T1 - Distributed polymer optical fiber sensors integrated in technical textiles for monitoring of masonry structures T2 - 4th International conference on structural health monitoring of intelligent infrastructure CY - Zurich, Switzerland DA - 2009-07-22 KW - Structural health monitoring KW - Fiber optic sensors KW - OTDR KW - Polymer optical fibers (POF) KW - POF sensors KW - Distributed sensor KW - Strain sensor KW - Technical textiles KW - Masonry PY - 2009 SN - 978-3-905594-52-2 IS - Paper 521 SP - 1 EP - 7(?) CY - Zurich, Switzerland AN - OPUS4-19788 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Raedel, Martina A1 - Torge, Manfred A1 - Bücker, Michael ED - Uwe Peltz, ED - Olivia Zorn, T1 - Restaurierung von Glasmalereien des 19. Jahrhunderts mit modifizierten Glasklebstoffen KW - Glasgemälde des 19. Jahrhunderts KW - Glasrestaurierung KW - Glasmalerei KW - Glasklebstoffe für die Restaurierung KW - Forschungsprojektergebnisse PY - 2009 SN - 978-3-8053-3981-0 SP - 235 EP - 241 PB - Philipp von Zabern AN - OPUS4-19790 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Droste, Bernhard A1 - Wieser, Karol E. ED - Warnecke, E. ED - Giller, H. T1 - Behälter zur Endlagerung radioaktiver Abfälle - Vorgehen bei der Bauartprüfung - T2 - 85. PTB-Seminar CY - Braunschweig, Deutschland DA - 1989-07-17 PY - 1989 SN - 3-88314-942-X SN - 0721-0892 N1 - Serientitel: PTB-Bericht – Series title: PTB-Bericht IS - SE-25 SP - 133 EP - 150 PB - Wirtschaftsverl. CY - Bremerhaven AN - OPUS4-19884 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Liehr, Sascha A1 - Lenke, Philipp A1 - Wendt, Mario A1 - Krebber, Katerina ED - Fu-Kuo Chang, T1 - POF sensors integrated in technical textiles for monitoring of earthwork structures and masonry T2 - Structural health monitoring 2009 - 7th International workshop on structural health monitoring CY - Stanford, CA, USA DA - 2009-09-09 KW - Distributed strain sensor KW - Optical fiber sensor KW - Geotextile KW - Technical textiles KW - POF sensor KW - Structural health monitoring KW - SHM KW - OTDR PY - 2009 SN - 978-1-60595-007-5 VL - 2 SP - 1739 EP - 1746 PB - DEStech Publications, Inc. AN - OPUS4-19960 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Akkerman, Floris ED - L.M. Hilty, ED - H. Itoh, ED - K. Hayashi, ED - Edelmann, X. T1 - Ecodesign and rebound effects T2 - R `09 Twin world congress and world resources forum CY - Nagoya, Japan and Davos, Switzerland DA - 2009-09-14 KW - Energy efficiency KW - Rebound KW - Ecodesign PY - 2009 SN - 978-3-905594-54-6 SP - 1 EP - 6(?) AN - OPUS4-19895 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Matthies, Klaus A1 - Erhard, Anton A1 - Ernst, h. A1 - Hübschen, G. A1 - Just, Tilman A1 - Völz, Uwe A1 - Wessels, J. A1 - Boehm, Rainer A1 - Gebhardt, W. A1 - Mrasek, Heinz A1 - Neumann, Eberhard A1 - Redmer, Bernhard A1 - Schmitz, V. A1 - Thomas, Hans-Martin A1 - Walte, F. T1 - Ultraschallprüfung von austenitischen Werkstoffen PY - 2009 SN - 978-3-87155-988-4 IS - 1. Aufl. SP - 1 EP - 464 PB - DVS-Verl. CY - Berlin AN - OPUS4-19897 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Röllig, Mathias T1 - Active thermography for the characterization of surfaces and interfaces of historic masonry structures T2 - NDTCE ´09 - 7th International symposium on nondestructive testing in civil engineering CY - Nantes, France DA - 2009-06-30 KW - Pulse-phase-thermography KW - Infrared radiation KW - Heating KW - Delamination KW - Plaster PY - 2009 SN - 978-2-7208-2542-5 SN - 1628-4704 SP - 1 EP - 6(?) AN - OPUS4-19874 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bartholmai, Matthias A1 - Werner, Klaus-Dieter A1 - Kammermeier, Michael T1 - Temperaturabhängige Prüfung von Beschleunigungsaufnehmern für stoßartige Beanspruchungen T2 - 15. ITG/GMA-Fachtagung - Sensoren und Messsysteme 2010 CY - Nürnberg, Deutschland DA - 2010-05-18 KW - Beschleunigungsaufnehmer KW - Hopkinsonstab KW - Fallprüfung KW - Gefahrstoffe KW - Behälter PY - 2010 SN - 978-3-8007-3260-9 IS - A1 / Paper 2 SP - 24 EP - 26 PB - VDE-Verl. CY - Berlin; Offenbach AN - OPUS4-21326 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neumann, Patrick P. A1 - Bartholmai, Matthias A1 - Wiggerich, B. T1 - Mikrodrohne zur Charakterisierung und selbstoptimierenden Suche von gasförmigen Gefahrstoffquellen T2 - 15. ITG/GMA-Fachtagung - Sensoren und Messsysteme 2010 CY - Nürnberg, Deutschland DA - 2010-05-18 KW - Mikrodrohne KW - Quadrokopter KW - Robotik KW - Suche und Lokalisierung von gasförmigen Gefahrstoffquellen PY - 2010 SN - 978-3-8007-3260-9 IS - Paper 136 SP - 753 EP - 757 PB - VDE-Verl. CY - Berlin; Offenbach AN - OPUS4-21327 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sobala, J. A1 - Zawadzka-Malota, I. A1 - Dorazil, T. A1 - Jarosz, J. A1 - von Oertzen, Alexander A1 - Schwarz, Silke A1 - Aufauvre, L. T1 - Tests of toxic fumes of high explosives performed within the international testing programme ITP 2009 T2 - International conference blasting techniques 2010 CY - Stará Lesná, Slovakia DA - 2010-05-20 KW - Toxic fumes KW - Explosives PY - 2010 SN - 978-80-970265-2-3 SP - 245 EP - 253 AN - OPUS4-21355 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Blanchard, Robert A1 - Poli, Marco A1 - Grätz, Rainer ED - Suter, G. ED - de Rademaeker, E. T1 - Effect of ignition position on the run-up distance to DDT for hydrogen-air explosions T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - Deflagration to detonation transition (DDT) KW - Ignition position KW - Hydrogen PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 157 EP - 164 CY - Brugge, Belgium AN - OPUS4-21443 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weltschev, Margit A1 - Deuerler, F. ED - Suter, G. ED - de Rademaeker, E. T1 - Comparison of material parameters of polyethylene grades and the test performance behaviour of packagings for the transport of dangerous goods T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - HDPE-Formstoffe KW - Werkstoffkennwerte KW - Spannungsrissbeständigkeit KW - Verpackungen KW - Baumusterprüfung PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 383 EP - 386 CY - Brugge, Belgium AN - OPUS4-21451 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Poli, Marco A1 - Blanchard, Robert A1 - Grätz, Rainer ED - Suter, G. ED - de Rademaeker, E. T1 - Venting of turbulent gas explosions T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - Explosionsdruckentlastung KW - Simulation KW - ANSYS CFX KW - Explosionsschutz KW - Sicherheitstechnik PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 165 EP - 172 CY - Brugge, Belgium AN - OPUS4-21442 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lang, Cindy A1 - Hübert, Thomas A1 - Quaas, H. A1 - Linke, M. T1 - On-line measurement of humidity in the agri-food chain KW - Sensor KW - Monitoring KW - Climatic conditions PY - 2010 SN - 978-90-66052-06-2 SN - 0567-7572 N1 - Serientitel: Acta Horticulturae – Series title: Acta Horticulturae VL - 858 SP - 413 EP - 417 AN - OPUS4-21490 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kus, J. A1 - Kaufhold, S. A1 - Klosa, D. A1 - Jianwei, M. A1 - Schmidt, Martin A1 - Suhendra, Suhendra T1 - Coal fire geothermometer: Controlling the extent and temperature field of underground coal fire zones T2 - 2nd International conference on coal fire research (ICCFR2) CY - Berlin, Germany DA - 2010-05-19 KW - Coal fires KW - Coal petrography KW - Coal mineralogy PY - 2010 SN - 978-3-86012-397-3 IS - Part 2 - Geosciences SP - 75 EP - 85 AN - OPUS4-21459 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fischer, C. A1 - Wu, J. A1 - Meyer, U. A1 - Kong, B. A1 - Schmidt, Martin A1 - Wuttke, M. A1 - Drebenstedt, C. A1 - Barth, Uli A1 - Rüter, H. T1 - Eight years of successful bilateral cooperation: Milestones of sino-german research T2 - 2nd International conference on coal fire research (ICCFR2) CY - Berlin, Germany DA - 2010-05-19 KW - Underground coal fires KW - Sino-german cooperation PY - 2010 SN - 978-3-86012-397-3 IS - Introduction SP - 3 EP - 18 AN - OPUS4-21460 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krietsch, Arne A1 - Schmidt, Martin A1 - Suhendra, Suhendra A1 - Helmis, Mario T1 - Laboratory investigations on the ignition and burning process of coal: Fire characteristics and gas emissions T2 - 2nd International conference on coal fire research (ICCFR2) CY - Berlin, Germany DA - 2010-05-19 KW - Spontaneous combustions KW - Coal fires KW - Gas emissions KW - Fire propagation PY - 2010 SN - 978-3-86012-397-3 SP - 147 EP - 152 AN - OPUS4-21461 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Martin A1 - Suhendra, Suhendra A1 - Rüter, H. T1 - Heat pipes - Suitable for extinguishing underground coal fires? T2 - 2nd International conference on coal fire research (ICCFR2) CY - Berlin, Germany DA - 2010-05-19 KW - Coal fires KW - Fire fighting KW - Heat pipes PY - 2010 SN - 978-3-86012-397-3 SP - 433 EP - 437 AN - OPUS4-21462 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Liebner, Christian A1 - Hieronymus, Hartmut A1 - Fischer, J. A1 - Klemm, E. T1 - Untersuchungen zur Explosionsausbreitung in mikrostrukturierten Reaktoren T2 - 12. Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Deutschland DA - 2010-06-15 KW - Deflagration KW - Detonation KW - Mikroreaktionstechnik KW - Mikroreaktor KW - Sicherheitstechnik PY - 2010 SN - 978-3-9813550-1-7 SN - 0938-5533 SP - 7 EP - 10 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-21495 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Liebner, Christian A1 - Fischer, J. A1 - Hieronymus, Hartmut A1 - Klemm, E. ED - Suter, G. ED - de Rademaeker, E. T1 - Are micro reactors inherently safe? - An investigation of gas phase explosion propagation limits T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - Deflagration KW - Detonation KW - Mikroreaktionstechnik KW - Mikroreaktoren KW - Sicherheitstechnik PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 281 EP - 285 CY - Brugge, Belgium AN - OPUS4-21496 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Poli, Marco A1 - Arndt, Detlef A1 - Scheider, Swen A1 - Grätz, Rainer T1 - Grenzen bei der Auslegung von turbulenten Explosionsdruckentlastungen T2 - 12. Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Deutschland DA - 2010-06-15 KW - Explosionsdruckentlastung KW - Turbulente Verbrennung KW - Explosionsschutz PY - 2010 SN - 978-3-9813550-1-7 SN - 0938-5533 SP - 19 EP - 22 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-21497 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Droste, Bernhard T1 - Bauartprüfung, Qualitätssicherung und Sonderversuche mit CASTOR-Behältern T2 - Fachtagung "Standortnahe Zwischenlager" CY - Bonn, Deutschland DA - 2001-03-14 PY - 2001 SN - 3-926956-43-7 SP - 141 EP - 194 PB - INFORUM-Verl. CY - Bonn AN - OPUS4-21559 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Huismann, Sven A1 - Korzen, Manfred A1 - Schneider, U. ED - Kodur, V. ED - Franssen, J.-M. T1 - A material model for the numerical simulation of high strength concrete columns subjected to fire loading T2 - 6th International conference "Structures in fire" CY - East Lansing, Michigan, USA DA - 2010-06-02 KW - High performance concrete KW - Columns KW - Fire KW - High temperatures KW - Numerical modelling KW - Numerical simulation PY - 2010 SN - 978-1-60595-027-3 SP - 312 EP - 319 PB - DEStech Publications, Inc. CY - Lancaster, PA, USA AN - OPUS4-21562 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilrich, Cordula A1 - Wehrstedt, Klaus-Dieter ED - Suter, G. ED - de Rademaeker, E. T1 - Examples for the influence of non-intrinsic properties on the classification of physical hazards according to the UN-GHS T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - UN-GHS KW - GHS KW - Chemikalieneinstufung KW - Classification of chemicals KW - Physikalische Gefahren KW - Physical hazards PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 395 EP - 398 CY - Brugge, Belgium AN - OPUS4-21525 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter A1 - Schönbucher, A. ED - Suter, G. ED - de Rademaeker, E. T1 - Characterization of large pool fires of organic compounds containing oxygen atoms T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - Pool fire KW - Hydrocarbons KW - Alcohols KW - Ketones KW - Organic peroxides KW - Fire characteristics PY - 2010 SN - 978-90-76019-291 VL - I SP - 365 EP - 372 CY - Brugge, Belgium AN - OPUS4-21552 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Eichler, Thorsten A1 - Isecke, Bernd A1 - Wilsch, Gerd A1 - Faulhaber, Armin A1 - Weidauer, Kathleen ED - Castro-Borges, P. ED - Moreno, E.I. ED - Sakai, K. ED - Gjorv, O.E. ED - Banthia, N. T1 - The effect of chloride depletion on the corrosion state of steel in alkaline environment T2 - CONSEC`10 - 6th International conference on concrete under severe conditions CY - Mérida, Yucatán, Mexico DA - 2010-06-07 KW - Thermal sprayed zinc KW - Cathodic protection KW - Steel in concrete KW - Multi-storey-car-park PY - 2010 SN - 978-0-415-59316-8 VL - 2 SP - 1115 EP - 1121 PB - Taylor & Francis CY - London, UK AN - OPUS4-21627 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gallo, Emanuela A1 - Schartel, Bernhard A1 - Braun, Ulrike A1 - Russo, P. A1 - Acierno, Domenico T1 - Synergistic flame retardant halogen-free combination of aluminium phosphinate and metal oxides in PBT T2 - Interflam 2010 - 12th International conference CY - Nottingham, UK DA - 2010-07-05 KW - Poly(butylene terephthalate) KW - Metal oxide KW - Phosphinate KW - Flammability PY - 2010 SN - 978-0-9541216-5-5 VL - 1 SP - 629 EP - 640 PB - Interscience Communications CY - London, UK AN - OPUS4-21669 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Droste, Bernhard T1 - Testing and licensing of radioactive waste containers T2 - 3rd International Seminar on Radioactive Waste Products CY - Würzburg, Germany DA - 1997-06-23 PY - 1997 SN - 3-89336-225-8 SN - 1433-5522 N1 - Serientitel: Schriften des Forschungszentrums Jülich - Reihe Energietechnik / Energy Technology – Series title: Schriften des Forschungszentrums Jülich - Reihe Energietechnik / Energy Technology VL - 2 SP - 173 EP - 180 AN - OPUS4-21657 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Völzke, Holger A1 - Zencker, Uwe A1 - Wieser, Günter A1 - Droste, Bernhard T1 - Testing and licensing of radioactive waste containers for disposal in Germany T2 - DisTec `98 - International conference on radioactive waste disposal CY - Hamburg, Germany DA - 1998-09-09 PY - 1998 VL - 2 SP - 431 EP - 436 PB - KONTEC CY - Hamburg AN - OPUS4-21608 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Droste, Bernhard ED - Slate, S. ED - Feizollahi, F. ED - Creer, J. T1 - Safety assessment of HLW and spent fuel transport and storage casks T2 - 5th International conference on radioactive waste management and environmental remediation - ICEM ´95 CY - Berlin, Germany DA - 1995-09-03 PY - 1995 SN - 0-7918-1219-7 VL - 1 SP - 243 EP - 248 AN - OPUS4-21730 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfennig, A. A1 - Kranzmann, Axel ED - Brebbia, C.A. ED - Longhurst, J.W.S. T1 - The role of pit corrosion in engineering the carbon storage site Ketzing, Germany T2 - Air pollution XVIII CY - Kos, Greece DA - 2010-06-21 KW - CO2-Speicherung KW - Ketzin KW - Korrosion KW - Steel KW - Pipeline KW - Pit corrosion KW - CCS KW - CO2-injection KW - CO2-storage PY - 2010 SN - 978-1-84564-450-5 DO - https://doi.org/10.2495/AIR100101 SN - 1746-448X SN - 1734-3541 SP - 109 EP - 119 PB - WIT Press AN - OPUS4-21683 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfennig, A. A1 - Linke, B. A1 - Kranzmann, Axel T1 - Predicting the long term corrosion behaviour of pipe steels used at the CCS-site Ketzing, Germany in laboratory CO2-saturated saline aquifer CCS-environment T2 - First international conference on materials for energy CY - Karlsruhe, Germany DA - 2010-07-04 KW - CCS KW - Corrosion KW - Steels KW - Injection pipe PY - 2010 SN - 978-3-89746-117-8 IS - Paper 1067 SP - 1005 EP - 1007 AN - OPUS4-21684 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Droste, Bernhard ED - Steen, H. T1 - Die Bewertung der Sicherheit von Umschließungen zur Lagerung von Flüssiggas T2 - 5. Kolloquium über Fragen der chemischen Sicherheitstechnik CY - Berlin, Deutschland DA - 1990-05-14 PY - 1990 SN - 389429-070-6 SP - 83 EP - 101 PB - Wirtschaftsverlag NW - Verlag für neue Wissenschaft GmbH CY - Bremerhaven AN - OPUS4-21694 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lexow, Jürgen A1 - Krause, Ulrich ED - Jovanovic, A. ED - Renn, O. ED - Salvi, O. T1 - Liaisons to national and EU authorities and transfer of research results from the iNTeg-Risk project T2 - 2nd iNTeg-Risk conference: New technologies & emerging risks - Dealing with multiple and interconnected emerging risks CY - Stuttgart, Germany DA - 2010-06-14 KW - iNTeg-Risk projekt KW - Risiko KW - Informationsvermittlung KW - Behörde PY - 2010 SN - 978-3-938062-33-3 IS - II.3.25 SP - 345 EP - 351 CY - Stuttgart AN - OPUS4-21807 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz ED - Tizani, W. T1 - Vibration of buildings on pile groups due to railway traffic - finite-element boundary-element, approximating and prediction methods N2 - A finite-element boundary-element software for the dynamic interaction of flexible structures and the soil has been extended for pile foundation. The boundary element method for the soil uses the Green´s functions of the layered half-space which have been generalised for interior loads. Pile groups of 10 to 20 piles of different arrays are analysed and compared with single piles. Simplified models have been developed for a user-friendly, practice oriented prediction software for railway induced ground and building vibration. T2 - ICCCBE 2010 - International conference on computing in civil and buildung engineering CY - Nottingham, UK DA - 2010-06-30 KW - Boundary elements KW - Soil-structure interaction KW - Pile foundations KW - Prediction software PY - 2010 SN - 978-1-907284-60-1 IS - Paper 275 SP - 549 EP - 554 PB - Nottingham University Press AN - OPUS4-21832 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Eichler, Thorsten A1 - Isecke, Bernd A1 - Faulhaber, Armin ED - Gieler-Breßmer, S. T1 - Die sekundären Schutzmechanismen des kathodischen Korrosionsschutz von Stahl in Beton und ihre Bedeutung für die Praxis T2 - 8. Symposium "Kathodischer Korrosionsschutz von Stahlbetonbauwerken" CY - Ostfildern, Deutschland DA - 2010-11-18 KW - Chloridmigration KW - pH-Wertänderung KW - Repassivierung KW - Kathodischer Korrsoionsschutz KW - Stahlbeton PY - 2010 SN - 3-924813-88-4 SP - 3 EP - 7 AN - OPUS4-22878 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beckmann, Jörg A1 - Schmidt, Richard A1 - Ewert, Uwe A1 - Berndt, A. A1 - Strebl, F. T1 - Agenda 2020 for a European Certification System for CBRNE Sensor Systems and Devices - the Concept for a Road Map N2 - Developments for technologies were initiated by the European Commission to improve future response capabilities and strategies to prevent terrorist attacks, to reduce the vulnerability to terrorism and to minimize the extent of damage from terrorist attacks. CBRN civil protection faces a growing significance in this concept and modern detectors and detection systems play the key role for a future reliable functioning that counters terrorism in Europe. The European Union is supporting the project CREATIF which is dedicated to provide a communication platform for technology users and decision makers, providers, and testers. First ideas were designed, strategies developed, preconditions and rules were named for a future internationally recognized certification system. A concept for a future European Certification System for CBRNE Sensor Systems and Devices and Processes has been developed, which is described in more detail. T2 - 1st International symposium on development of CBRN defence capabilities CY - Berlin, Germany DA - 2010-11-30 KW - WMD KW - CBRNE KW - Certification KW - Testing PY - 2010 SN - 978-3-935938-75-4 IS - P10.5 SP - 1603 EP - 1606 CY - Bonn AN - OPUS4-22879 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schukar, Vivien A1 - Münzenberger, Sven A1 - Gründer, Klaus-Peter A1 - Habel, Wolfgang T1 - Experimental validation technique for strain transfer characterisation of fibre bragg grating based strain sensors N2 - A unique testing facility (KALFOS) using ESPI (electronic speckle pattern interferometery) as a referencing method has been realized for the characterisation of the strain transfer process from a component under load into surface applied fibre Bragg grating based strain sensors. The strain transfer mechanism can be described experimentally, while matching specific measurement requirements and environmental conditions. T2 - Photonics 2010 - 10th International conference on fiber optics & photonics CY - Guwahati, India DA - 2010-12-11 PY - 2010 SN - 978-81-309-1719-1 IS - Poster\255_SEN_Schukar_V_G_1_full SP - 1 EP - 4 AN - OPUS4-23007 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Ulrich T1 - Conduction-diffusion problems - „exotics“ in fire simulations? N2 - Fire simulation is mostly understood as simulation of room fires, i.e. where the free volume is large compared to the volume occupied by the combustible matter. In such a case, the fire propagation is predominantly a fluid dynamics problem. Fire propagation through bulk materials, insulation layers or wooden construction elements is, however, determined by conduction and diffusion. For these cases modified modelling principles and different software solutions have to be applied. Computational results are presented for temperature evolution and charring progress in a timber beam exposed to ISO standard temperature curve, for self-ignition and fire propagation in a waste deposit with consideration to conduction/diffusion and convection inside the porous medium and for a fire in an underground coal seam where conduction/diffusion is the prevailing mechanism. T2 - 11th International symposium on fire protection CY - Leipzig, Germany DA - 2010-06-08 KW - Self-ignition KW - Porous media KW - Fire simulation KW - Smouldering PY - 2010 SP - 1 EP - 13 AN - OPUS4-22958 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Blome, Mark A1 - Pelkner, Matthias A1 - Reimund, Verena A1 - Kreutzbruck, Marc T1 - Flux leakage measurements for defect characterization using a high precision 3-axial GMR magnetic sensor T2 - 15. ITG/GMA-Fachtagung - Sensoren und Messsysteme 2010 CY - Nürnberg, Deutschland DA - 2010-05-18 PY - 2010 SN - 978-3-8007-3260-9 IS - 151/A6 SP - 809 PB - VDE-Verl. CY - Berlin; Offenbach AN - OPUS4-22963 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schenk, Gottfried A1 - Erhard, Anton A1 - Döring, Joachim A1 - Möhrle, Walter T1 - Gerät zur Linearabtastung mit Strahlergruppen (Real-Time-Scanner-Gerät) N2 - Im Labor für Ultraschallverfahren der BAM wurde ein Gerätesystem zum Betrieb von linearen Strahlergruppen entwickelt, aufgebaut und erprobt. Es besteht aus einer Geräteeinheit mit 64 Sende- und 64 Empfangskanälen, einem Steuerrechner mit integriertem Transientenrekorder und wurde mit einem Linienarray mit 32 Elementen und einer Frequenz von 17 MHz erprobt. Das Schallbündel einer Gruppe von 8 Elementen kann per elektronischem Versatz über den Gesamtschwinger bewegt und dabei gleichzeitig geschwenkt und fokussiert werden. Dabei konnten Wanddicke'n von 0,5 mm sowie eine Anordnung von Flachbodenbohrungen mit 0,7 mm Durchmesser mit großer Genauigkeit nachgewiesen werden. Mögliche Anwendungen sind die Prüfung von Punktschweißverbindungen, die Korrosionsprüfung, die Prüfung von Flugzeugkomponenten, die Schweißnahtprüfung. T2 - DACH-Tagung 1996 CY - Lindau, Deutschland DA - 1996-05-13 PY - 1996 SN - 3-931381-07-0 VL - 52 SP - 541 EP - 548 AN - OPUS4-22934 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Döring, Joachim A1 - Stark, Wolfgang T1 - Untersuchungen zur Aushärtung von Duroplasten T2 - DACH-Tagung 1996 CY - Lindau, Deutschland DA - 1996-05-13 PY - 1996 SN - 3-931381-07-0 VL - 52 SP - 765 EP - 771 AN - OPUS4-22935 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kitze, Jessica A1 - Brackrock, Daniel A1 - Brekow, Gerhard A1 - Prager, Jens A1 - Gaal, Mate A1 - Kreutzbruck, Marc A1 - Szabo, D. A1 - Kuti, K. A1 - Paczolay, G. T1 - SAFT und TOFD - Ein Vergleich im Analyseverhalten von Reflektoren T2 - 15. ITG/GMA-Fachtagung - Sensoren und Messsysteme 2010 CY - Nürnberg, Deutschland DA - 2010-05-18 PY - 2010 SN - 978-3-8007-3260-9 IS - C5/115 SP - 650 EP - 657 PB - VDE-Verl. CY - Berlin; Offenbach AN - OPUS4-22971 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Häcker, Ralf A1 - Knothe, Esther A1 - Wossidlo, Peter ED - Pohl, M. T1 - Experimentelle Untersuchungen für die Anwendung von Materialmodellen zur numerischen Auslegung des Containments von Abgasturboladern T2 - Tagung Werkstoffprüfung 2010 CY - Neu-Ulm, Deutschland DA - 2010-12-02 KW - Abgasturbolader KW - Containment KW - Hochgeschwindigkeitsversuch PY - 2010 SN - 978-3-514-00778-9 SP - 317 EP - 322 PB - Verl. Stahleisen GmbH CY - Düsseldorf AN - OPUS4-22949 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühn, Hans-Joachim A1 - Aegerter, J. A1 - Frenz, H. ED - Pohl, M. T1 - DIN EN ISO 6892-1:2009 Der Zugversuch: Erste Erfahrungen aus der praktischen Umsetzung der neuen Norm T2 - Tagung Werkstoffprüfung 2010 CY - Neu-Ulm, Deutschland DA - 2010-12-02 KW - Zugversuch KW - Dehngeschwindigkeit KW - Steifigkeit PY - 2010 SN - 978-3-514-00778-9 SP - 51 EP - 62 PB - Verl. Stahleisen GmbH CY - Düsseldorf AN - OPUS4-22950 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Structural health monitoring systems for reinforced concrete structures KW - Structural health monitoring KW - Sensors KW - Fibre-optic sensor KW - Damage assessment KW - Reinforced concrete PY - 2010 SN - 978-1-84569-950-5 VL - 2 SP - 63 EP - 94 PB - Woodhead Publ. AN - OPUS4-22984 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang A1 - Schukar, Vivien T1 - Reliability issues when using fibre optic strain sensors for materials investigations and structural monitoring N2 - Reliable measurement results with fibre optic sensors require profound knowledge of physical mode of function, of materials used and appropriate application. There is often serious discrepancy between use in laboratory environment and on site. The paper identifies important aspects to be considered and shows ways to transfer innovations onto practical use. T2 - Photonics 2010 - 10th International conference on fiber optics & photonics CY - Guwahati, India DA - 2010-12-11 KW - Fibre optic sensors KW - Reliability KW - Validation KW - Calibration KW - Long-term stability KW - Materials behaviour KW - Speckle-interferometry KW - 3D-image correlation KW - Strain measurement PY - 2010 SN - 978-81-309-1719-1 SP - 1 EP - 4 AN - OPUS4-22985 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wang, D. A1 - Costa, F. R. A1 - Leuteritz, A. A1 - Purohit, Purv A1 - Schönhals, Andreas A1 - Vyalikh, A. A1 - Scheler, U. A1 - Wagenknecht, U. A1 - Kutlu, B. A1 - Heinrich, G. ED - Mittal, V. T1 - Polyolefin nanocomposites with layered double hydroxides PY - 2010 SN - 978-1-4398-1454-3 SP - 225 EP - 245 PB - CRC Press AN - OPUS4-23039 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Erning, Johann Wilhelm T1 - Korrosionsschäden durch thermische und chemische Desinfektion T2 - 3-Länder-Korrosionstagung - Nichtrostende Stähle - Spezielle Anwendungen und angepasste Lösungen CY - Berlin, Deutschland DA - 2010-04-19 KW - Nichtrostende Stähle PY - 2010 SN - 978-3-935406-40-6 SP - 114 EP - 116 PB - DECHEMA AN - OPUS4-23050 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Michaeli, W. A1 - Hentschel, Manfred P. A1 - Lingk, O. T1 - A novel approach for measuring the specific volume of (semi-crystalline) polymers at elevated cooling rates using X-rays T2 - ANTEC 2007, Annual technical conference CY - Cincinnati, OH, USA DA - 2007-05-06 KW - Thermoplaste KW - Rekristallisation KW - Quenching KW - Monochromatische Radiometrie KW - Kurzzeit-Radiometrie KW - Röntgen-Szintillationsdetektor hoher Zählraten PY - 2007 SN - 0-9753707-5-8 SP - 1617 EP - 1621 PB - Society of Plastics Engineers AN - OPUS4-17186 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Martin A1 - Lohrer, Christian A1 - Krause, Ulrich T1 - Einflussgrößen auf die Selbstentzündung von Schüttgütern und Stäuben T2 - Sichere Handhabung brennbarer Stäube : Tagung CY - Nürnberg, Deutschland DA - 2008-03-11 KW - Selbstentzündung KW - Schüttgüter KW - Kohle KW - Biomasse PY - 2008 SN - 978-3-18-092024-5 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 2024 SP - 201 EP - 216 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-17188 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Martin A1 - Krause, Ulrich A1 - Lohrer, Christian T1 - Numerische Simulation von Selbstentzündungsvorgängen, Modell und Praxisbeispiele KW - Selbstentzündung KW - Schüttgüter KW - Kohle KW - Biomasse KW - Numerische Simulation PY - 2008 SN - 978-3-18-092024-5 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 2024 SP - 315 EP - 328 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-17189 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Scheid, Marc A1 - Teske, H.-J. A1 - Lackes, R. T1 - Strahlanlagen Metalle/ Leichtmetalle - Explosionsgefahren und Schutzmaßnahmen KW - Gefährdungsanalyse KW - Brände KW - Explosionen KW - Schutzmaßnahmen KW - Strahlanlage KW - Sicherheitstechnische Kenngrößen KW - Stäube KW - Aluminium KW - Stahl PY - 2008 SN - 978-3-18-092024-5 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 2024 SP - 179 EP - 190 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-17190 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Perez, R.M. A1 - Sandler, J.K.W. A1 - Altstädt, V. A1 - Hoffmann, T. A1 - Pospiech, D. A1 - Artner, J. A1 - Ciesielski, M. A1 - Döring, M. A1 - Braun, Ulrike A1 - Schartel, Bernhard ED - Schartel, Bernhard T1 - Flame retardant epoxy resin system for liquid composite moulding applications KW - Epoxy resin KW - Fire retardancy PY - 2007 SN - 978-3-8334-8873-3 SP - 69 EP - 84 PB - Books on Demand GmbH CY - Norderstedt AN - OPUS4-17627 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Braun, Ulrike A1 - Knoll, Uta A1 - Neubert, Dietmar A1 - Schartel, Bernhard ED - Schartel, Bernhard T1 - Fire Retarding Mechanisms of Red Phosphorus in Polybutylenterephthalate (PBT) in Combination with Melamine Cyanurate or Zinc Oxide KW - Fire retardancy KW - Polyester KW - Red phosphorus KW - Thermal analysis KW - Cone calorimeter PY - 2007 SN - 978-3-8334-8873-3 SP - 35 EP - 49 PB - Books on Demand GmbH CY - Norderstedt AN - OPUS4-17662 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krebber, Katerina A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Witt, Jens A1 - Schukar, Marcus ED - Ecke, Wolfgang ED - Kara J. Peters, ED - Norbert G. Meyendorf, T1 - Smart technical textiles with integrated POF sensors N2 - Fiber optic sensors based on polymer optical fibers (POF) take advantage of the high elasticity and high break-down strain of POF. Because of their outstanding elastic properties, POF are well suited for integration into technical textiles like geotextiles and medical textiles. Smart textiles with incorporated POF sensors, able to sense various mechanical and physical quantities, can be realized. The integration of POF as a sensor into geotextiles for monitoring of displacement of soil is very attractive since POF can be used for distributed strain measurement of strain values of more than 40 %. An online monitoring of critical mechanical deformations of geotechnical structures like dikes, dams, slopes, embankments as well as of masonry structures can be ensured. Medical textiles that incorporate POF sensors can control vital physiological parameters like respiratory movement and can be used for wearable health monitoring of patients requiring a continuous medical assistance and treatment. The biocompatibility of POF is an important criterion for selecting POF as a medical sensor. The paper shows selected examples of using POF sensors for the mentioned monitoring purposes. T2 - Smart Sensor Phenomena, Technology, Networks, and Systems 2008 CY - San Diego, California, USA DA - 2008-03-10 KW - Fiber optic sensors KW - Polymer optical fibers (POF) KW - POF sensors KW - Geotextiles KW - Medical textiles KW - Strain sensor KW - Respiratory monitoring KW - POF OTDR KW - Distributed sensor KW - Geotechnical structures PY - 2008 SN - 978-0-8194-7119-2 DO - https://doi.org/10.1117/12.776758 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE VL - 6933 IS - 6933 SP - 69330V-1 - 69330V-15 PB - SPIE CY - Bellingham AN - OPUS4-17680 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beck, Uwe ED - Richard Suchentrunk, T1 - Qualitätssicherung in der Oberflächentechnik mit optischen Prüfverfahren KW - Qualitätssicherung KW - Oberflächentechnik KW - Optische Prüfung PY - 2008 SN - 978-3-87480-245-1 N1 - Serientitel: Jahrbuch Oberflächentechnik – Series title: Jahrbuch Oberflächentechnik VL - 64 SP - 319 EP - 329 PB - Leuze CY - Bad Saulgau AN - OPUS4-17681 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pentzien, Simone A1 - Conradi, Andrea A1 - Krüger, Jörg A1 - Wurster, R. ED - M. Castillejo, ED - P. Moreno, ED - M. Oujja, ED - R. Radvan, ED - J. Ruiz, T1 - Monitoring of the laser cleaning process of artificially soiled paper N2 - Laser cleaning of soiled paper is a challenging task due to the fact that a contamination has to be removed and a fragile organic material has to be preserved. The ejection of particles forms a significant channel for the removal of unwanted surface contaminations and can be exploited for an in-situ monitoring of the cleaning procedure. 532-nm-nanosecond single and multi pulse laser cleaning of artificially soiled Whatman© paper was performed. Particles were registered with a dust monitor. These in-situ experiments were combined with ex-situ investigations of cleaning and substrate damage thresholds by means of light and scanning electron microscopic techniques. The cleaning efficiency measured by a multi-spectral imaging system was compared to the in-situ particle monitoring. Additionally, possible color changes of the paper substrate were evaluated. T2 - LACONA VII International Conference, "Lasers in the Conservation of Artworks" CY - Madrid, Spain DA - 2007-09-17 PY - 2008 SN - 978-0-415-47596-9 SP - 345 EP - 351 PB - Taylor & Francis AN - OPUS4-17974 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Köpp, Christian A1 - Kruschwitz, Sabine A1 - Drdacky, M. A1 - Hennen, C. A1 - Lanza, S. A1 - Tomazevic, M. A1 - Kolymbas, D. A1 - Herle, I. A1 - Virsta, A. A1 - Binda, L. A1 - Askew, P. ED - Dina D´Ayala, ED - Enrico Fodde, T1 - Cultural Heritage protection against flood - A European FP6 research project T2 - 6th International Conference on Structural Analysis of Historic Construction (SAHC), "Structural Analysis of Historic Construction - Preserving Safety and Significance" CY - Bath, UK DA - 2008-07-02 KW - Cultural heritage KW - Flood KW - Damage KW - Non-destructive testing PY - 2008 SN - 978-0-415-46872-5 SP - 109 EP - 117 PB - CRC Press AN - OPUS4-17907 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Liehr, Sascha A1 - Lenke, Philipp A1 - Krebber, Katerina A1 - Seeger, M. A1 - Thiele, E. A1 - Metschies, H. A1 - Gebreselassie, B. A1 - Münich, J.C. A1 - Stempniewski, L. ED - Francis Berghmans, ED - Mignani, Anna Grazia ED - Cutolo, Antonello ED - Patrick P. Meyrueis, ED - Thomas P. Pearsall, T1 - Distributed strain measurement with polymer optical fibers integrated into multifunctional geotextiles N2 - Fiber optic sensors based on polymer optical fibers (POF) have the advantage of being very elastic and robust at the same time. Unlike silica fibers, standard PMMA POF fibers can be strained to more than 40% while fully maintaining their light guiding properties. We investigated POF as a distributed strain sensor by analysing the backscatter increase at the strained section using the optical time domain reflectometry (OTDR) technique. This sensing ability together with its high robustness and break-down strain makes POF well-suited for integration into technical textiles for structural health monitoring purposes. Within the European research project POLYTECT (Polyfunctional textiles against natural hazards) technical textiles with integrated POF sensors, among others sensors are being developed for online structural health monitoring of geotechnical structures. Mechanical deformation in slopes, dams, dikes, embankments and retrofitted masonry structures is to be detected before critical damage occurs. In this paper we present the POF strain sensor properties, reactions to disturbing influences as temperature and bends as well as the results of the different model tests we conducted within POLYTECT. We further show the potential of perfluorinated graded-index POF for distributed strain sensing with increased spatial resolution and measurement lengths. T2 - Optical Sensors 2008 CY - Strasbourg, France DA - 2008-04-07 KW - Fiber optic sensors KW - OTDR KW - Polymer optical fibers (POF) KW - POF sensors KW - Distributed sensor KW - Strain sensor KW - Geotextiles KW - Structural health monitoring PY - 2008 SN - 978-0-8194-7201-4 DO - https://doi.org/10.1117/12.780508 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE VL - 7003 IS - 7003 SP - 700302-1 - 700302-15 PB - SPIE CY - Bellingham AN - OPUS4-17951 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bartholmai, Matthias A1 - Kammermeier, Michael A1 - Werner, Klaus-Dieter A1 - Homfeld, S.D. A1 - Köppe, Enrico T1 - Funkbasiertes Sensornetzwerk zur Schadensfrüherkennung an Bauwerken KW - Funksensorik KW - Sensornetzwerk KW - Schadensfrüherkennung KW - Strukturüberwachung PY - 2008 SN - 978-3-18-092011-5 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 2011 SP - 587 EP - 592 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-17264 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Schors, Jörg ED - Gerhard Busse, ED - Danny Van Hemelrijck, ED - Igor Solodov, ED - Anastasopoulos, Athanasios T1 - Direct iterative reconstruction of computed tomography trajectories (DIRECTT) T2 - 4th International Conference of Emerging Technologies in Non-Destructive Testing (ETNDT 4) CY - Stuttgart, Germany DA - 2007-04-02 KW - Computed tomography KW - Reconstruction algorithm PY - 2007 SN - 978-0-415-46476-5 SP - 229 EP - 236 PB - Taylor & Francis CY - London, UK AN - OPUS4-17560 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klinger, Christian T1 - Vermeidung winderregter Schwingungen im Stahlbau - Schadensanalysen und daraus folgende Maßnahmen T2 - 33. VDI-Jahrestagung Schadensanalyse "Produktverbesserung durch Schadensanalyse" CY - Würzburg, Deutschland DA - 2007-09-27 PY - 2007 SN - 978-3-18-091985-0 SN - 0083-5560 IS - 1985 SP - 23 EP - 36 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-17564 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfennig, Anja T1 - Isothermal Oxidation Behaviour and Microstructure of the single crystal superalloy PWA 1483 at 950° C N2 - To determine the high temperature behaviour of the single crystal Ni-base superalloy PWA 1483 oxidation testing (950° C, 0 h - 1000 h) in air was carried out using samples cut perpendicular to (001)-direction. T2 - 1st EUCOMAS Conference CY - Berlin, Germany DA - 2008-05-26 PY - 2008 SN - 978-3-18-092028-3 SN - 0083-5560 IS - 2028 SP - 391 EP - 392 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-17548 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fichera, M.A. A1 - Jäger, Christian A1 - Schartel, Bernhard A1 - Braun, Ulrike A1 - Pawlowski, Kristin ED - Menachem Lewin, T1 - Solid-state NMR for monitoring the thermal decomposition of flame retarded polymers PY - 2007 SN - 1-59623-321-4 VL - I SP - 9 EP - 19 PB - BCC Research CY - Norwalk, CT, USA AN - OPUS4-17581 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lohrer, Christian A1 - Schmidt, Martin A1 - Krause, Ulrich T1 - Influence of environmental parameters on the self-ignition behavior of coal T2 - International Conference "Spontaneous Coal Seam Fires: Mitigating a Global Disaster" CY - Beijing, P.R. China DA - 2005-11-29 KW - Self-ignition KW - Coal KW - Influence parameters PY - 2008 SN - 978-7-302-17140-9 N1 - Serientitel: ERSEC ecological book series – Series title: ERSEC ecological book series IS - 4 SP - 210 EP - 232 PB - Tsinghua University Press CY - Beijing, China AN - OPUS4-17610 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Ulrich A1 - Schmidt, Martin A1 - Lohrer, Christian T1 - Computation of real-scale coal fire scenarios based on linking lab-scale experiments with a numerical heat and mass transfer model T2 - International Conference "Spontaneous Coal Seam Fires: Mitigating a Global Disaster" CY - Beijing, P.R. China DA - 2005-11-29 KW - Self-ignition KW - Numerical simulations PY - 2008 SN - 978-7-302-17140-9 N1 - Serientitel: ERSEC ecological book series – Series title: ERSEC ecological book series IS - 4 SP - 485 EP - 512 PB - Tsinghua University Press CY - Beijing, China AN - OPUS4-17611 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böttcher, Bernhard ED - Müller, E. A. W. T1 - Wärmeflußverfahren - Technische Hilfsmittel und Einrichtungen PY - 1975 IS - Abschnitt C.4 SP - 1 EP - 28 PB - Oldenbourg CY - München AN - OPUS4-17607 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böttcher, Bernhard ED - Müller, E. A. W. T1 - Wärmeflußverfahren - Erscheinungsform der Prüfwerte, Genauigkeit und Empfindlichkeit der Prüfverfahren PY - 1975 IS - Abschnitt E.4 SP - 1 EP - 16 PB - Oldenbourg CY - München AN - OPUS4-17608 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Suhendra, Suhendra A1 - Schmidt, Martin A1 - Krause, Ulrich ED - Shengcai Li, ED - Wang, Yajun ED - An, Ying ED - Sun, Xiuyun ED - Li, Xin T1 - Extinguishing underground coal seam fires: Experimental and numerical investigations of coal fire propagation T2 - International Symposium on Safety Science and Technology CY - Beijing, China DA - 2008-09-24 KW - Numerische Simulation KW - Kohlefeuer KW - Klimaschutz KW - Brandlöschung PY - 2008 SN - 978-7-03-022901-4 VL - VII SP - 2523 EP - 2532 PB - Science Press USA Inc. AN - OPUS4-18917 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wettmarshausen, Sascha A1 - Mix, Renate A1 - Meyer-Plath, Asmus A1 - Mittmann, Hans-Ulrich A1 - Friedrich, Jörg Florian ED - K.L. Mittal, T1 - Plasma Bromination - a selective way to monotype functionalized polymer surfaces KW - Functional groups KW - Polymer surfaces KW - Plasma bromination KW - Grafting KW - Spacer KW - Selective plasma process PY - 2009 SN - 978-90-04-16590-8 VL - 5 SP - 3 EP - 18 PB - Koninklijke Brill NV CY - Leiden, The Netherlands AN - OPUS4-18944 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Naghib Zadeh, Hamid A1 - Glitzky, Carsten A1 - Rabe, Torsten A1 - Lissner, A. ED - J.G. Herinrich, ED - C. Aneziris, T1 - Development of capacitor materials with sintering temperature below 900 °C T2 - 10th International Conference and Exhibition of the European Ceramic Society (ECerS) CY - Berlin, Germany DA - 2007-06-17 KW - Capacitor KW - LTCC KW - Barium titanate PY - 2007 SN - 3-87264-022-4 SP - 554 EP - 558 PB - Göller CY - Baden-Baden AN - OPUS4-18925 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ewert, Uwe A1 - Redmer, Bernhard A1 - Rädel, Christoph A1 - Osterloh, Kurt A1 - Schnars, U. A1 - Henrich, R. A1 - Schimmelmann, O. A1 - Bavendiek, K. A1 - Jahn, M. T1 - Mobile X-ray Inspection of light weight materials N2 - Digital detectors such as phosphor imaging plates (IP) and digital detector arrays (DDA) allow radiographic inspection with higher efficiency and improved image quality in comparison to the classic film technique. Mobile X-ray flash tubes are used routinely for veterinarian and security applications. New high sensetive IPs and DDAs enable to apply them for inspection of light materials with low X-ray attenuation as in aluminium, plastics and composites. A versatile computed tompgraphy (CT) system was developed for in situ inspection of large aircraft components under production conditions. A gate based planar computed tomograph wsa developed and testes for inspection of integrety of the stringer incorporation. Successful test trials were performed to prove the detection rate of cracks in embedded stringers. Honey comb structures of aircrafts have to be inspected for water inclusions during in-service inspections. Thermography is a powerful method for in house inspections when variations in temperature caused e. g. by sunshine can be excluded. A new X-ray diaphragm was developed for mobile back scatter measurements of large components. This method is insensitive to heat alterations in the field and thus can be applied also outdoors. T2 - International Symposium on NDT in Aerospace CY - Fürth, Germany DA - 2008-12-03 KW - X-ray light materials KW - Computertomography KW - Laminography KW - Backscatter KW - Fibre composites KW - Flash generator PY - 2008 SN - 978-3-940283-12-2 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 114 SP - 99 EP - 111 PB - DGZfP CY - Berlin AN - OPUS4-18927 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane ED - L. Binda, ED - M. di Prisco, ED - R. Felicetti, T1 - Combination of non-destructive testing methods for the assessment of masonry structures T2 - 1st International RILEM Conference, "on Site Assessment of Concrete, Masonry and Timber Structures" (SACoMaTiS 2008) CY - Varenna, Italy DA - 2008-09-01 KW - Non-destructive testing KW - Masonry KW - Structure KW - Moisture KW - Combination of methods KW - Strategies PY - 2008 SN - 978-2-35158-062-2 VL - 1 IS - PRO 59 SP - 715 EP - 726 PB - RILEM Publications AN - OPUS4-18956 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hünert, Daniela A1 - Schulz, Wencke A1 - Kranzmann, Axel ED - Roland Span, ED - Ingo Weber, T1 - Corrosion of steels in H2O-CO2 atmospheres at temperatures between 500°C and 700°C N2 - The introduction of carbon capture technology into thermal power plants benefits from combustion of fuel and pure oxygen due to high partial pressures of CO2 in the flue gas. The consumption of energy for carbon capture devices and oxygen production plants has to be compensated by higher efficiencies of the power plant. Consequently IGCC plants with 80 bar reactors and high temperature turbine equipment, boilers with 700 °C steam raising units will be the next generation power plants. All plants have in common locally in the process gas compositions with high CO2 partial pressure and steam. In our test we applied a gas composition with 30% H2O and 70% CO2 an composition in between the water content of coal burned in pure oxygen and Methane-oxygen combustion. Additional gas fractions such as SO2 will be added in coming experiments. In this paper we discuss the attack of our model gas composition on different typical power plant construction steels with chromium contents in the range of 1 to 24%. The test conditions were annealing time up to 1000 h, 80 bar pressure, fast flowing gas and temperatures between 500 and 700°C depending on the maximum working temperature of the individual steel. Dependent on the test parameters and in particular the chromium content the oxide scale growth mechanism, the scale thickness, the scale microstructure and phase sequences differed. In particular we observe the growth of FeO at temperatures lower than 570°C which is the eutectic decomposition temperature in the Oxygen-iron phase diagram. Iron carbides are primarily formed in low alloyed steels near the oxide steel interface. The steels studied containing more then 9% chromium the growth of Fe3O4 and Fe-Cr-Spinel was typical. Co and W influenced the reaction in 9 - 12% Cr-steel. The attrition of Mn and other alloying additions was monitored. In no case a dense and protective Cr2O3 or an other Metal-Cr-oxide layer was observed. The oxide scale thickness increases strongly with temperature and decrease with raising chromium content. Data of oxide scale thickness up to corrosion time of 1000 h will be presented. A model will be presented, which deals with possible reactions paths during the corrosion processes in flowing CO2 and water. The steels can be arranged according the reaction with gas and their alloying elements such as Mn, Co and W. In the test environment the maximum working temperature of the steels decreased 50K compared to working temperature in current power plant environment. T2 - 15th International Conference on the Properties of Water and Steam (ICPWS XV), "Water, Steam, and Aqueous Solutions - Advances in Science and Technology for Power Generation" CY - Berlin, Germany DA - 2008-09-07 KW - High temperature corrosion KW - 9-12% Cr-steels KW - H2O-CO2 PY - 2008 SN - 978-3-931384-64-7 IS - Session 06: Electro-12 SP - 1 EP - 7 AN - OPUS4-19061 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Zoëga, Andreas A1 - Wiggenhauser, Herbert T1 - Propagation time of elastic surface waves on concrete specimens under uniaxial loads T2 - NDE/NDT for Highways and Bridges - Structural Materials Technology (SMT) CY - Oakland, CA, USA DA - 2008-09-08 KW - Concrete KW - Surface wave KW - Load KW - Propagation time PY - 2008 SN - 978-1-57117-180-1 SP - 161 EP - 167 CY - Oakland, CA, USA AN - OPUS4-19114 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Droste, Bernhard ED - Mischke, J. T1 - Überblick über die behälterspezifischen Gesichtspunkte der Zwischenlagerung abgebrannter Kernbrennstoffe N2 - Es wird ausgeführt, dass die Wiederaufbereitung ausgedienter Brennelemente aus Druck- bzw. Siedewasserreaktor-Kernkraftwerken "schadlos durchführbar und wirtschaftlich vertretbar" ist und damit Vorrang hat vor einer Entsorgung ohne Wiederaufbereitung. In der Wiederaufbereitungsanlage Wackersdorf sind alle notwendigen Entsorgungsschritte von der Eingangslagerung bis zur endlagergerechten Behandlung von radioaktiven Abfällen zusammengefasst. PY - 1986 SN - 3-88314-521-1 SP - 30 EP - 38 PB - Wirtschaftsverl. CY - Bremerhaven AN - OPUS4-19116 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Georg A1 - Acil, Y. A1 - Jepsen, S. A1 - Spitzer, Andrea ED - Ohgushi, H. T1 - Rapidly resorbable and spongiosa-like dicalcium potassium sodium phosphate glass-ceramics for three-dimensional cultivation of human osteoblast-like cells PY - 1999 SN - 981-024099-6 N1 - Serientitel: Bioceramics – Series title: Bioceramics IS - 12 SP - 233 EP - 236 PB - World Scientific CY - Singapore AN - OPUS4-19147 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pasternak, H. A1 - Komann, Steffen ED - Gizejowski, ED - Kozlowski, ED - Sleczka, ED - Ziólko, T1 - A new design formula for determining the load-bearing capacity of locally supported shells T2 - XI. Miedzynarodowa Konferencja Naukowo-Techniczna "Konstrukcje Metalowe" CY - Rzeszów, Poland DA - 2006-06-21 KW - Cylindrical shell KW - Stability KW - Steel KW - Buckling KW - Longitudinal stiffeners PY - 2006 SN - 0-415-40120-8 SP - 160 EP - 161 PB - Taylor & Francis CY - London, UK AN - OPUS4-19152 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Mayer, K. A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Streicher, Doreen ED - L. Binda, ED - M. di Prisco, ED - R. Felicetti, T1 - New examples for ultrasonic imaging of prestressed concrete elements T2 - 1st International RILEM Conference, - on Site Assessment of Concrete, Masonry and Timber Structures (SACoMaTiS 2008) CY - Varenna, Italy DA - 2008-09-01 KW - Ultrasonic imaging KW - Grouting condition KW - Elastodynamic Finite Integration Technique (EFIT) PY - 2008 SN - 978-2-35158-062-2 VL - 1 IS - PRO 59 SP - 1 EP - 10 PB - RILEM Publications AN - OPUS4-19069 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Gräfe, Boris A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Streicher, Doreen ED - Christian U. Grosse, T1 - New possibilities for ultrasonic imaging of concrete elements KW - Beton KW - Zerstörungsfreie Prüfung im Bauwesen (ZfPBau) KW - Ultraschallecho-Verfahren KW - Luftgekoppelter Ultraschall KW - Phased array PY - 2007 SN - 978-3-540-72447-6 SP - 575 EP - 582 PB - Springer CY - Heidelberg AN - OPUS4-19107 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Korzen, Manfred A1 - Rodrigues, J. P. C. A1 - Correia, A. M. ED - F. Wald, ED - P. Kallerová, ED - J. Chlouba, T1 - Thermal restraint effects on the fire resistance of steel and composite steel and concrete columns T2 - International Conference - Applications of structural fire engineering CY - Prague, Czech Republic DA - 2009-02-19 KW - Fire resistance KW - Thermal restraint KW - Steel columns KW - Steel-concrete columns PY - 2009 SN - 978-80-01-04266-3 SP - 512 EP - 517 CY - Prague, Czech Republic AN - OPUS4-19111 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Segebade, Christian A1 - Berger, Achim ED - Robert A. Meyers, T1 - Photon activation analysis N2 - In photon activation analysis (PAA), nuclides of the analyte elements in the material sample under study are converted to radioactive nuclides through exposure to high-energy photons. Characteristic radiation upon disintegration of these radionuclides (preferably ? quanta) is then measured with appropriate spectrometers. PAA is not an “absolute” method; hence, the samples under investigation have to be irradiated together with a comparative material sample (calibration material) with well-known chemical composition. After spectroscopic measurement of both samples, the quantitative evaluation is performed by comparison of the two resulting element spectra, basically following the same procedure as in most instrumental methods, e.g. ICP, AAS, etc. The particular advantages of this method are freedom from blank values; reduced danger of contamination; and, since frequent investigations can be carried out “nondestructively”, easy handling of materials that are difficult to treat chemically, e.g. certain refractory metals, dusts, ashes, etc. Another advantage is the option to study very small samples (a few milligrams) as well as very large ones (up to kilogram amounts). Basically, there are no limitations concerning the nature of material studied but matrices like lead or other heavy elements raise the limit of detection considerably, and separation techniques have to be used. KW - Activation analysis KW - Electron accelerator KW - Radiation spectrometry KW - Instrumental analysis KW - Multi-element analysis KW - Radiochemical separation PY - 2008 SN - 978-0-471-97670-7 DO - https://doi.org/10.1002/9780470027318.a6211.pub2 SP - 1 EP - 23 PB - John Wiley & Sons, Ltd. AN - OPUS4-19215 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Österle, Werner A1 - Kloß, Heinz A1 - Dmitriev, A.I. ED - Bartz, Wilfried J. ED - Friedrich Franek, T1 - Friction control during automotive braking - experimental observations and simulation at the nanometer scale T2 - 3rd Vienna International Conference - Nano-Technology CY - Vienna, Austria DA - 2009-03-18 KW - Bremse KW - Dritter Körper KW - Verschleiß KW - Reibung KW - Nanocharakterisierung KW - Modellierung PY - 2009 SN - 978-3-901657-32-0 SP - 335 EP - 341 AN - OPUS4-19222 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pasternak, H. A1 - Komann, Steffen ED - Camotin, D. T1 - A new approach for determining the load-bearing capacity of locally supported shells N2 - In practice usually thin-walled cylindrical silos are supported locally at the bottom rim of the shell. In this area a stress concentration may occur, which is responisble for buckling of the shell. In the currently applied codes, there is no information, how to analyze the load-bearing capacity of theselocally supported shells. In this paper, a new design formula is given for determining the load-bearing capacity. T2 - International Colloquium on Stability and Ductility of Steel Structures CY - Lisbon, Portugal DA - 2006-09-06 KW - Cylindrical shells KW - Stability KW - Steel KW - Buckling KW - Longiudinal stiffeners PY - 2006 SN - 972-846961-6 VL - 2 SP - 595 EP - 602 PB - IST Press CY - Lisabon AN - OPUS4-19153 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schartel, Bernhard A1 - Braun, Ulrike ED - Menachem Lewin, T1 - Flame retardancy mechanisms of aluminium phosphinate in glass fiber reinforced thermoplastics T2 - 19th Annual BCC Conference - Recent Advances in Flame Retardancy of Polymeric Materials CY - Stamford, Connecticut, USA DA - 2008-06-09 KW - Aluminium phosphinate KW - PA 66 KW - PBT KW - Flame retardancy KW - Cone calorimeter PY - 2008 SN - 1-59623-435-0 IS - CHM007I SP - 36 EP - 47 PB - BCC Research CY - Wellesley, MA, USA AN - OPUS4-19167 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Symietz, Christian A1 - Lehmann, Erhard A1 - Gildenhaar, Renate A1 - Krüger, Jörg A1 - Berger, Georg T1 - Fixierung resorbierbarer Knochenersatzkeramik auf Ti6Al4V-Implantatmaterial mittels Femtosekundenlaser T2 - 5. Thüringer Grenz- und Oberflächentage und 7. Thüringer Biomaterial-Kolloquium CY - Friedrichroda, Deutschland DA - 2009-09-15 KW - Metallprothese KW - Implantat KW - Knochenersatz KW - Bioaktives Material KW - Lasersintern KW - Femtosekundenlaser PY - 2009 SN - 978-3-00-028446-5 SP - 327 AN - OPUS4-20051 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hartelt, Manfred A1 - Wäsche, Rolf T1 - Volumetrische Verschleiß-Berechnung an gekrümmten Kontaktgeometrien T2 - 50. Tribologie-Fachtagung - Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendung CY - Göttingen, Deutschland DA - 2009-09-21 KW - Verschleißberechnung KW - Calculation of wear volume PY - 2009 SN - 978-3-00-028824-1 VL - I SP - 3-1 - 3-9 CY - Aachen AN - OPUS4-20023 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bohse, Jürgen T1 - Methoden zur Überprüfung der Messempfindlichkeit von Schallemissionssensoren im Labor T2 - 17. Kolloquium Schallemission - Statusberichte zur Entwicklung und Anwendung der Schallemissionsanalyse CY - Bad Schandau, Deutschland DA - 2009-09-24 KW - Schallemissionssensoren KW - Messempfindlichkeit KW - Verifizierung PY - 2009 SN - 978-3-940283-19-1 IS - DGZfP-BB 118-CD (Vortrag 06) SP - 1 EP - 9 AN - OPUS4-20084 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Behrendt, R. A1 - Bohse, Jürgen A1 - Ortwein, Hans-Peter A1 - Wachsmuth, Janne T1 - Möglichkeiten des Einsatzes von Laser-Doppler-Interferometern im Bereich der Schallemissionsanalyse T2 - 17. Kolloquium Schallemission - Statusberichte zur Entwicklung und Anwendung der Schallemissionsanalyse CY - Bad Schandau, Deutschland DA - 2009-09-24 KW - Laser-Doppler-Interferometer KW - Oberflächenwellen KW - Schallemissionssensoren KW - Kalibrierung PY - 2009 SN - 978-3-940283-19-1 IS - DGZfP-BB 118 (Vortrag 16) SP - 1 EP - 9 AN - OPUS4-20085 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Jörg A1 - Pentzien, Simone A1 - Conradi, Andrea A1 - Lußky, Katharina A1 - Engel, P. ED - Günter Wiedemann, ED - Udo Klotzbach, ED - Ulrich Bauer-Bornemann, T1 - Laserreinigung von künstlich verschmutzten europäischen Papieren des 19. Jahrhunderts N2 - Diese Arbeit beschreibt die Laserreinigung von gebräuchlichen Papieren des 19. Jahrhunderts in Kombination mit zwei Schmutzvarianten. Aufgrund der weiten Verbreitung in Bibliotheken und Kunstsammlungen wurden Hadernpapier und holzhaltiges Papier ausgewählt. Als Referenz diente Whatman-Filterpapier. Zur künstlichen Verschmutzung wurden Zeichenkohle oder Standardschmutz (Standard Test Dust SAE J 726 fine, mit Flammruß im Verhältnis 20:1 gemischt) mit Hilfe von Pinsel und Staubsauger jeweils auf die drei Papierarten aufgetragen und in den Faserverbund eingesaugt. Die Nutzung von Modellproben erweist sich für grundlegende Untersuchungen als vorteilhaft, da das Vorhandensein hinreichend großer Flächen (gleichartiger Objekte) für einen Vergleich mit Ergebnissen klassischer Reinigungstechniken unabdingbar ist. Die preiswerten Proben erlauben darüber hinaus auch die Anwendung zerstörender Analysetechniken. Für die Laserreinigungsexperimente wurde ein Nd:YAG-Laser mit Impulsdauern in der Größenordnung von 10 ns bei 532 nm Wellenlänge und einer Repetitionsrate von 500 Hz verwendet. Die Laser-Bearbeitungsstation erlaubt die flächige Bearbeitung von Objekten, wobei der Laserstrahl bewegt wird. Der Laser wird mittels Computer ferngesteuert und unter Klasse-1-Sicherheitsbedingungen betrieben. Bei der Untersuchung der Modellproben wurde jeweils die Anzahl der Impulse pro Probenstelle sowie die Laser-Energiedichte variiert. Ziel der Arbeiten war die Ermittlung eines Laser-Arbeitsbereiches für die Reinigung der verschiedenen Papierproben. Die Modellobjekte wurden vor und nach der Laserbehandlung mittels lichtmikroskopischer, rasterelektronenmikroskopischer und colorimetrischer Analysemethoden untersucht. T2 - Tagung "Laseranwendung in Restaurierung und Denkmalpflege" CY - Osnabrück, Deutschland DA - 2009-01-30 KW - Laserreinigung KW - Nd:YAG-Laser KW - Hadernpapier KW - Holzhaltiges Papier KW - Filterpapier KW - Mikroskopie KW - Farbmessung PY - 2009 SN - 978-3-8167-8106-6 SP - 177 EP - 189 PB - Fraunhofer IRB Verl. CY - Stuttgart AN - OPUS4-20059 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ludwig, Jörg ED - Kreysa, G. ED - Langer, O.-U. ED - Pfeil, N. T1 - Anforderungen und Entwicklungen bei Transporttanks T2 - 39. Tutzing-Symposion CY - Tutzing, Deutschland DA - 2001-03-18 PY - 2001 SN - 3-89746-025-4 SN - 0934-4969 N1 - Serientitel: Praxis der Sicherheitstechnik – Series title: Praxis der Sicherheitstechnik IS - 5 SP - 63 EP - 90 PB - DECHEMA CY - Frankfurt am Main AN - OPUS4-20168 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Karsten A1 - Quercetti, Thomas A1 - Musolff, André T1 - Characterisation of shock-absorbing components under impact loading N2 - For validation of structural integrity under normal and hypothetical accident conditions during transport and storage of dangerous goods the Federal Institute for Materials Research and Testing (BAM) focuses its safety related scientific research on advanced mechanical safety assessment methods including simulation of high rate impact of model components and structures. An impact and crash test facility was recently developed for performing dynamic impact tests with component size specimen, or to crash specimens of impact limiter materials and structural components. The paper presents experimental techniques of BAM drop test machine and options of several measurement methods and advancements in order to characterize typical shock-absorbing materials under impact loading conditions. Instrumented drop weight tests are performed to complete materials data base and energy absorption of shock-absorbing materials as well as to implement materials and structural parameters into FEA of reference structures. T2 - 9th International conference on the mechanical and physical behaviour of materials under dynamic loading - DYMAT 2009 CY - Brussels, Belgium DA - 2009-09-07 PY - 2009 SN - 978-2-7598-0472-6 DO - https://doi.org/10.1051/dymat/2009081 VL - 1/2 SP - 569 EP - 574 PB - EDP Sciences AN - OPUS4-20242 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Chabrelie, Aude A1 - Gallucci, E. A1 - Müller, Urs A1 - Scrivener, K. ED - Sun, W. ED - Breugel, K. van ED - Miao, C. ED - Ye, G. ED - Chen, H. T1 - Durability of field concrete made of Portland cement and supplementary cementitious materials under several European exposure conditions N2 - Deterioration of cementitious materials by sulfate ions is a concern for concrete in contact with ground water (and in a lesser extent sea water) in many parts of Europe, and is an important issue for underground construction identified as a major area for progress in the construction industry. Sulfate resistance relates closely to testing and standardization and therefore to prescriptive approaches. The lack of feed back on the durability of structures made of blended cements makes it difficult to fit these new concretes with existing test methods and performance criteria. This paper concerns the microstructural study of field samples and structures made of blended concretes available across Europe. This concerns several materials exposed to various climate regimes, ranging from Southern to Northern Europe (Spain, Germany, United Kingdom, Denmark and Norway). Complementary techniques such as SEM, micro-XRF, XRD and PIXE are used to evaluate the microstructural performance and stability of the phase assemblage of those blended concretes in the case of sulfate (and chloride in some instances) ingress, compare to pure Portland concrete. T2 - International conference on microstructure related durability of cementitious composites (RILEM Proceedings) CY - Nanjing, China DA - 2008-10-13 PY - 2008 SN - 978-2-35158-065-3 SN - 978-2-35158-084-4 N1 - Serientitel: RILEM proceedings – Series title: RILEM proceedings SP - 421 EP - 427 AN - OPUS4-20290 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Buchholz, Uwe A1 - Mc Hugh, Jarlath T1 - Material characterisation of cross-linked polyethylene (XLPE) and liquid silicone rubber (LSR) by means of ultrasonic spectroscopy T2 - Internationaler ETG-Kongress 2009 CY - Düsseldorf, Germany DA - 2009-10-27 KW - Ultrasonic spectroscopy KW - Partial discharge KW - Material characterisation KW - Solid dielectric KW - Mechanical properties KW - DMA PY - 2009 SN - 978-3-8007-3195-4 SN - 0341-3934 IS - Paper 4.17 SP - 271 EP - 272 PB - VDE-Verl. CY - Berlin AN - OPUS4-20265 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Wettmarshausen, Sascha A1 - Hennecke, Manfred T1 - Neue Molekülarchitekturen an Polyolefinoberflächen T2 - 17. Neues Dresdner Vakuumtechnisches Kolloquium - Beschichtung, Modifizierung und Charakterisierung von Polymeroberflächen CY - Dresden, Deutschland DA - 2009-10-21 KW - Plasma KW - Bromierung KW - Spacer KW - Haftvermittler KW - Metallbedampfung KW - Schälfestigkeit PY - 2009 SN - 978-3-9812550-1-0 SP - 38 EP - 40 AN - OPUS4-20250 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Wettmarshausen, Sascha ED - G. Blasek, T1 - Generelle thermodynamische Probleme bei der Funktionalisierung von Polyolefinoberflächen T2 - 17. Neues Dresdner Vakuumtechnisches Kolloquium - Beschichtung, Modifizierung und Charakterisierung von Polymeroberflächen CY - Dresden, Deutschland DA - 2009-10-21 KW - Plasma KW - Bromierung KW - Spacer KW - Haftvermittler KW - Metallbedampfung KW - Schälfestigkeit KW - Thermodynamik PY - 2009 SN - 978-3-9812550-1-0 SP - 65 EP - 67 AN - OPUS4-20251 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mix, Renate A1 - Schulze, Rolf-Dieter A1 - Rau, A. A1 - Friedrich, Jörg Florian ED - G. Blasek, T1 - Aerosol-Barriereentladung und Elektrospray zur Polymerschichtabscheidung T2 - 17. Neues Dresdner Vakuumtechnisches Kolloquium - Beschichtung, Modifizierung und Charakterisierung von Polymeroberflächen CY - Dresden, Deutschland DA - 2009-10-21 KW - Corona KW - Barriereentladung KW - Haftvermittler KW - Schälfestigkeit PY - 2009 SN - 978-3-9812550-1-0 SP - 76 EP - 80 AN - OPUS4-20252 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Borsch, S. A1 - Schurig, Michael ED - Bertram, Albrecht ED - Tomas, Jürgen T1 - Regularisation of the Schmid law in crystal plasticity N2 - Plastic deformations of crystals are governed by a multitude of slip systems resulting in a yield locus with corners and an irregular flow rule. To overcome these difficulties, a regularization is needed resulting in a single equation that gathers the contributions of the distinct slip systems. We investigate two complementary approaches (regularization of the yield locus, and the plastic potential, respectively). The main result is a coincidence of the approaches only for uniform slip system activity which is the case in polyslip for similar hardening states. KW - Crystal plasticity KW - Yield locus KW - Regular yield criterion PY - 2008 SN - 978-3-540-85714-3 SP - 77 EP - 91 PB - Springer AN - OPUS4-20310 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Chabrelie, Aude A1 - Gallucci, E. A1 - Müller, Urs A1 - Scrivener, K. ED - Stark, J. T1 - Parallel study of field and lab concretes under sulfate exposure T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 PY - 2009 SN - 978-3-00-027265-3 VL - 2 SP - 2-0317 - 2-0322 CY - Weimar AN - OPUS4-20297 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Holle, H. A1 - Kautek, W. A1 - Pentzien, Simone A1 - Krüger, Jörg A1 - Mäder, M. A1 - Schreiner, M. T1 - Laser cleaning on historic picture postcards N2 - This contribution compares traditional cleaning and laser methods. Partial laser cleaning with a nanosecond pulse laser (wavelength of 532 nm) has proved very promising for future application in paper conservation-restoration. Traditional cleaning methods are not always sufficient or successful in surface cleaning of objects of art. Comparative studies of traditional paper cleaning methods and laser cleaning were made on several historic picture postcards printed with the chromolithography technique. PY - 2009 SN - 978-3-85028-490-5 SP - 189 EP - 206 PB - Berger Horn CY - Wien, Austria AN - OPUS4-20397 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pentzien, Simone A1 - Conradi, Andrea A1 - Lussky, K. A1 - Engel, P. A1 - Krüger, Jörg ED - Engel, Patricia T1 - Laser cleaning of artificially soiled paper N2 - Laser cleaning for works of art on paper might be a supplemental, noncontact method to overcome some of the limitations of traditional dry cleaning techniques. Three different types of paper (pure-cellulose filter paper, rag paper, and wood-pulp paper) were mechanically soiled with pulverized charcoal in a standardized procedure to make model samples. These samples were characterized microscopically and by means of lightness measurements using a multi-spectral imaging system. A prototype laser workstation with Laser Class I conditions for the operator was used for the cleaning experiments. For 10-ns laser pulses at a wavelength of 532 nm, a set of laser parameters was established for a successful cleaning of the samples avoiding damage to the paper substrate. Single- and multi-pulse illumination conditions were tested. An extensive microscopic analysis after laser treatment of the cleaned parts of the samples provided insight into the remaining soiling on the surface and in the bulk of the paper material. PY - 2009 SN - 978-3-85028-490-5 SP - 171 EP - 188 PB - Berger Horn CY - Wien, Austria AN - OPUS4-20398 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stark, Wolfgang T1 - Historische Entwicklung der Überwachungsmethoden bei der Duroplastverarbeitung T2 - TECHNOMER 2009 - 21. Fachtagung über Verarbeitung und Anwendung von Polymeren CY - Chemnitz, Deutschland DA - 2009-11-12 KW - Bakelit KW - Phenolharz KW - Isolierstoff KW - Gütesicherung KW - Prüfung PY - 2009 SN - 978-3-939382-09-6 IS - PQP4 SP - 1 EP - 9 AN - OPUS4-20399 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Glötzl, R. A1 - Schneider-Glötzl, J. A1 - Liehr, Sascha A1 - Lenke, Philipp A1 - Wendt, Mario A1 - Krebber, Katerina A1 - Gabino, L. A1 - Krywult, J. A1 - Krywult, L. T1 - First results of a field test in Belchatow brown coal mine to investigate creeping slopes T2 - VI. International brown coal mining congress "Brown coal - energy - environment - future" CY - Belchatów, Poland DA - 2009-05-18 PY - 2009 SN - 978-83-88316-85-2 SP - 57 EP - 64 PB - Art-Teskt CY - Kraków, Poland AN - OPUS4-20401 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schlichting, Joachim A1 - Kervalishvili, Guram N. A1 - Maierhofer, Christiane A1 - Kreutzbruck, Marc ED - Mazal, Pavel T1 - Defect sizing by local excitation thermography T2 - 5th International workshop of NDT experts - NDT in progress 2009 CY - Prague, Czech Republic DA - 2009-10-12 KW - Thermography KW - Laser excitation KW - FEM modeling KW - Crack sizing PY - 2009 SN - 978-80-214-3968-9 SP - 261 EP - 270 AN - OPUS4-20333 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Völz, Uwe A1 - Mrasek, Heinz A1 - Matthies, Klaus A1 - Kreutzbruck, Marc ED - Mazal, Pavel T1 - Visualization of sound propagation with electrodynamic probes T2 - 5th International workshop of NDT experts - NDT in progress 2009 CY - Prague, Czech Republic DA - 2009-10-12 KW - Ultrasonic KW - Sound field KW - Visualization KW - Electrodynamic probe KW - Nondestructive testing (NDT) KW - Nickel alloy KW - Anisotropic weld KW - Narrow-gap weld PY - 2009 SN - 978-80-214-3968-9 SP - 321 EP - 328 AN - OPUS4-20334 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gaal, Mate A1 - Döring, Joachim A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc ED - Mazal, Pavel T1 - Detection of flaws with lamb waves and air-coupled ultrasound T2 - 5th International workshop of NDT experts - NDT in progress 2009 CY - Prague, Czech Republic DA - 2009-10-12 KW - Lamb waves KW - Air-coupled probes KW - Beam profile KW - Ultrasonic testing PY - 2009 SN - 978-80-214-3968-9 SP - 53 EP - 58 AN - OPUS4-20335 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kreutzbruck, Marc A1 - Thomas, Hans-Martin A1 - Casperson, Ralf A1 - Reimund, Verena A1 - Blome, Mark A1 - Allweins, K. A1 - Lembke, G. ED - Mazal, Pavel T1 - Magnetic response field of spherical defects within conductive components T2 - 5th International workshop of NDT experts - NDT in progress 2009 CY - Prague, Czech Republic DA - 2009-10-12 KW - Electromagnetic testing KW - Spherical defects KW - Finite element method PY - 2009 SN - 978-80-214-3968-9 SP - 163 EP - 172 AN - OPUS4-20336 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schenk, Gottfried A1 - Brackrock, Daniel A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc A1 - Deutsch, W.A.K. A1 - Joswig, M. A1 - Maxam, K. A1 - Schuster, V. ED - Mazal, Pavel T1 - Ultrasonic inspection system for automated round-bar-testing based on phased array technique T2 - 5th International workshop of NDT experts - NDT in progress 2009 CY - Prague, Czech Republic DA - 2009-10-12 KW - Ultrasonic testing KW - Phased array KW - Round bar testing PY - 2009 SN - 978-80-214-3968-9 SP - 253 EP - 259 AN - OPUS4-20338 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Prager, Jens A1 - Hoever, Carsten A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc ED - Mazal, Pavel T1 - Flaw detection with guided waves using phased array technique T2 - 5th International workshop of NDT experts - NDT in progress 2009 CY - Prague, Czech Republic DA - 2009-10-12 KW - Ultrasonic testing KW - Guided waves KW - Plate-like structures PY - 2009 SN - 978-80-214-3968-9 SP - 203 EP - 212 AN - OPUS4-20339 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Heckel, Thomas A1 - Thomas, Hans-Martin A1 - Kreutzbruck, Marc A1 - Rühe, S. ED - Mazal, Pavel T1 - High speed non-destructive rail testing with advanced ultrasound and eddy-current testing techniques T2 - 5th International workshop of NDT experts - NDT in progress 2009 CY - Prague, Czech Republic DA - 2009-10-12 KW - Non-destructive testing (NDT) KW - Rail inspection KW - Ultrasound KW - Eddy current KW - Signal processing PY - 2009 SN - 978-80-214-3968-9 SP - 101 EP - 109 AN - OPUS4-20340 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Boehm, Rainer A1 - Brackrock, Daniel A1 - Kitze, Jessica A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc ED - Mazal, Pavel T1 - Saft for crack surface analysis - Comparison of modeling and phased array measurements T2 - 5th International workshop of NDT experts - NDT in progress 2009 CY - Prague, Czech Republic DA - 2009-10-12 KW - Ultrasonic testing KW - SAFT KW - Phased array PY - 2009 SN - 978-80-214-3968-9 SP - 1 EP - 10 AN - OPUS4-20341 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Stoppel, Markus A1 - Kurz, J.H. T1 - Bestandsaufnahme und Zustandsanalyse von Brücken und Parkhäusern mit automatisierten Verfahren T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - Zerstörungsfreie Prüfung im Bauwesen KW - ZfPBau KW - Kombination KW - OSSCAR KW - BetoScan KW - Roboterplattform KW - Bauwerkscanner PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 (Vortrag 15) SP - 1 EP - 9 CY - Berlin AN - OPUS4-20926 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Balke, Christian A1 - Konersmann, Rainer A1 - Kühl, Christiane A1 - Ludwig, Jörg ED - Bothe, H. ED - Stolz, T. T1 - Brandverhalten von Flüssiggastanks T2 - 11. BAM/PTB-Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Braunschweig, Deutschland DA - 2007-06-26 KW - BLEVE KW - Brand KW - Flüssiggas PY - 2007 SN - 978-3-86509-700-2 N1 - Serientitel: PTB-Bericht – Series title: PTB-Bericht SP - 110 EP - 119 PB - Wirtschaftsverl. NW CY - Braunschweig AN - OPUS4-20986 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühl, Christiane T1 - Novellierung der Technischen Regel für Rohrfernleitungen (TRFL) PY - 2010 SN - 978-3-8027-5333-6 N1 - Serientitel: Schriftenreihe aus dem Institut für Rohrleitungsbau Oldenburg – Series title: Schriftenreihe aus dem Institut für Rohrleitungsbau Oldenburg VL - 34 SP - 552 EP - 562 PB - Vulkan AN - OPUS4-20976 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Mecke, R. A1 - Schiller, M. A1 - Kalisch, U. A1 - Meinhardt, J. A1 - Hennen, C. T1 - Kombination der aktiven Thermografie mit laserbasierten Verfahren zur Erfassung von 3D-Geometrien in der Denkmalpflege T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - ZfPBau KW - Denkmalpflege KW - Statue KW - Aktive Thermografie KW - Lichtschnittverfahren KW - Laserscanner KW - Verfahrenskombination PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 (Poster 06) SP - 1 EP - 8 CY - Berlin AN - OPUS4-21063 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Maierhofer, Christiane A1 - Höhn, J. T1 - Thermografie am Schichtsystem Putz auf Beton im Labor und in der Praxis T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - ZfPBau KW - Putzablösung KW - Betondecke KW - Aktive Thermografie PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 (Poster 07) SP - 1 EP - 9 CY - Berlin AN - OPUS4-21064 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, A. A1 - Neumann, H.-H. A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Bluhm, J. T1 - Praktische Untersuchungen an Kulturgütern und Verkehrsbauten in der Baudenkmalpflege T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - ZfPBau KW - Kulturgüter KW - Fallstudien KW - Radar KW - Aktive Thermografie KW - Endoskopie PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 (Vortrag 11) SP - 1 EP - 14 CY - Berlin AN - OPUS4-21065 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wäsche, Rolf A1 - Hartelt, Manfred A1 - Gräber, H.G. T1 - Experimental study on wear of dental ceramic materials - tests in artificial saliva T2 - 17th International colloquium tribology - Solving friction and wear problems CY - Stuttgart/Ostfildern, Germany DA - 2010-01-19 KW - Fretting KW - Life science KW - Wear KW - Dental materials PY - 2010 SN - 3-924813-80-9 IS - Special aspects of tribology SP - 1 EP - 7 AN - OPUS4-21070 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Völz, Uwe A1 - Kreutzbruck, Marc A1 - Mrasek, Heinz A1 - Matthies, Klaus T1 - Visualization of sound propagation in solids using electrodynamic probes N2 - When dealing in ultrasonic testing with inhomogeneous material structure data interpretation can be rather difficult. This is especially the case when using anisotropic dissimilar welds made from austenitic steel or nickel based alloys, which are currently used for modern power plant concepts. In this work we present an electrodynamic technique to visualize sound waves with frequencies up to 3 MHz in steel components providing a simple use and a high signal-to-noise ratio. By detecting the grazing beam with an electrodynamic probe, we measured the particle displacement as a function of time with a spatial resolution in the order of 1 mm. Adapting the electrodynamic probe and its coil alignment allows for measuring the displacement components in all three dimensions. This comprises the detection of the horizontal and vertical particle displacement with respect to the surface and thus also the transformation from longitudinal waves into transversal waves and vice versa. We report on measurements of the sound field in a complex narrow-gap weld, joining a nickel alloy with a chrome steel with a substantial anisotropy of the weld structure. The test system enables us to visualize the wave propagation within the weld and indicates the reflection scenario and the energy losses due to both the anisotropic structure and material defects. T2 - IEEE International Ultrasonics Symposium 2009 CY - Rome, Italy DA - 2009-09-19 KW - Acoustic propagation KW - Anisotropic media KW - Nickel alloys KW - Nondestructive testing KW - Visualization PY - 2009 SN - 978-1-4244-4390-1 SN - 1948-5727 SP - 1495 EP - 1498 AN - OPUS4-21126 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bartholmai, Matthias A1 - Köppe, Enrico ED - León, F.P. ED - Sommer, K.-D. ED - Heizmann, M. T1 - Funksensornetzwerk zur Strukturüberwachung und Schadensfrüherkennung an Bauwerken KW - Funksensorik KW - Sensornetzwerk KW - Schadensfrüherkennung KW - Strukturüberwachung PY - 2010 SN - 978-3-86644-476-8 SP - 49 EP - 56 PB - KIT Scientific Publishing CY - Karlsruhe AN - OPUS4-21086 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schurig, Michael A1 - Häßlich, Mirko A1 - Klinger, Christian ED - Ziegahn, K.-F. T1 - Der Temperaturgang von Beschleunigungssensoren und sein Einfluss auf die Messunsicherheit bei kombinierten Vibrations- und Klimaprüfungen N2 - Die Empfindlichkeit von Beschleunigungssensoren hängt von der Temperatur ab, bei der sie eingesetzt werden. Aus diesem Grund fordert der Entwurf der Neuausgabe von IEC 60068-2-531[1], dass Beschleunigungssensoren bei allen Prüftemperaturen kalibriert sein müssen. Darüber hinaus müssen die Grenzabweichungen der entsprechenden dynamischen Prüfverfahrensnormen eingehalten werden. Das Messunsicherheitsbudget für die Beschleunigungsmessung bei einer kombinierten Vibrations- und Klimaprüfung wird aufgestellt. Einflussgrößen sind die Kalibrierunsicherheit, der Frequenz- und Temperaturgang des Sensors, sowie die Messunsicherheit der elektrischen Messkette. Anhand typischer Prüfbedingungen werden Kriterien aufgestellt, wann der Temperaturgang für die Prüfung relevant wird. Eigene Untersuchungen [2] und Hinweise aus der Literatur [3] zeigen, dass dies eher selten der Fall ist. Gegebenenfalls muss auf geeignete Maßnahmen zur Verringerung der Messunsicherheit zurückgegriffen werden. Eine Kompensation des Temperaturganges ist möglich [4], aber derzeit noch aufwändig. T2 - 39. Jahrestagung der GUS 2010 - Umweltflüsse erfassen, simulieren, bewerten CY - Stutensee, Deutschland DA - 2010-03-17 PY - 2010 SN - 978-3-9813136-0-4 SP - 135 EP - 147 PB - DWS Werbeagentur und Verlag GmbH CY - Pfinztal AN - OPUS4-21107 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bäßler, Ralph A1 - Sarmiento Klapper, Helmuth A1 - Burkert, Andreas T1 - Alternative, nachhaltige Energiekonzepte - Herausforderungen für Werkstoffe zum Einsatz in Geothermieanlagen T2 - 3-Länder-Korrosionstagung - Nichtrostende Stähle - Spezielle Anwendungen und angepasste Lösungen CY - Berlin, Deutschland DA - 2010-04-19 KW - Hochlegierter Stahl KW - Geothermie KW - Örtliche Korrosion KW - Klassische Auslagerung KW - Elektrochemie PY - 2010 SN - 978-3-935406-40-6 SP - 1 EP - 10(?) PB - DECHEMA AN - OPUS4-21190 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias ED - Czichos, Horst ED - Habig, K.-H. T1 - Hochtemperaturtribologie KW - Ingenieurkeramik KW - Triboaktive Werkstoffe KW - (Ti,Mo)(C,N) KW - Tin-2Cr2O2n-1 KW - Magnéliphasen KW - Hochtemperatur KW - Tribologie KW - SiC KW - Al2O3 KW - ZrO2 KW - Si3N4 PY - 2010 SN - 978-3-8348-1810-2 SP - 611 EP - 623 PB - Springer-Vieweg CY - Wiesbaden ET - 3. Auflage / 2010 AN - OPUS4-21197 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Burkert, Andreas A1 - Fischer, Joachim A1 - Lehmann, Jens A1 - Saal, H. A1 - Ulbrich, D. T1 - Werkstoffauswahl nichtrostender Stähle im Bauwesen entsprechend der allgemeinen bauaufsichtlichen Zulassung Z-30.3-6 T2 - 3-Länder-Korrosionstagung - Nichtrostende Stähle - Spezielle Anwendungen und angepasste Lösungen CY - Berlin, Deutschland DA - 2010-04-19 KW - Nichtrostender Stahl KW - Werkstoffauswahl KW - Verarbeitung KW - Korrosionsschutz KW - Korrosion KW - Dauerhaftigkeit PY - 2010 SN - 978-3-935406-40-6 SP - 18 EP - 26 PB - DECHEMA AN - OPUS4-21152 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Welzel, F. A1 - Grunewald, Thomas A1 - Beyer, M. A1 - Grätz, Rainer A1 - Klages, C.-P. T1 - Mechanisch erzeugte Reib- und Schlagfunken im Vergleich T2 - 12. Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Deutschland DA - 2010-06-15 PY - 2010 SN - 978-3-9813550-1-7 SN - 0938-5533 SP - 32 EP - 36 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-21266 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Seefeld, T. A1 - Gumenyuk, Andrey T1 - Prozessverständnis beim Strahlschweißen von Aluminium T2 - DVS-Forschungsseminar - Strahlschweißen von Aluminium CY - Stuttgart, Deutschland DA - 2010-01-28 PY - 2010 SN - 978-3-87155-591-6 SN - 0418-9639 VL - 266 SP - 45 EP - 51 PB - DVS Media GmbH AN - OPUS4-21277 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Poli, Marco A1 - Grätz, Rainer A1 - Schröder, Volkmar T1 - Turbulente Explosionsdruckentlastung - Quo vadis? N2 - Zur Bemessung von Druckentlastungseinrichtungen bei Gasexplosionen in Umschließungen existieren derzeitig nur wenige wissenschaftlich fundierte Auslegungskriterien, die die konstruktiven Randbedingungen oder Prozessbedingungen der explosionsgefährdeten Anlagenteile ausreichend berücksichtigen. Aus diesem Grund werden in der Praxis häufig stark konservative Annahmen getroffen, die zu erheblichen Überdimensionierungen der Druckentlastungseinrichtungen führen können. Aus sicherheitstechnischer Perspektive können gerade diese vermeintlichen Sicherheitsmargen zu einer erheblichen Beschleunigung des transienten Druckverlaufs und damit eher zu einer Unterdimensionierung führen oder sogar den Übergang von Deflagrationen zu Detonationen (DDT) begünstigen [1-3]. Um die Gefahren bzw. die Einflussfaktoren dieser kritischen Zustände beurteilen zu können, soll im Rahmen eines Forschungsprojektes das Explosionsverhalten in Anwesenheit Turbulenz bildender Einbauten oder bei nicht atmosphärischen Bedingungen – speziell bei erhöhten Anfangsdrücken - systematisch untersucht werden. T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Explosionsdruckentlastung KW - Turbulente Verbrennung KW - Konstruktiver Explosionsschutz PY - 2010 SN - 978-3-89746-119-2 IS - Paper C-04 SP - 1 EP - 11 CY - Frankfurt/M. AN - OPUS4-22348 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rauchegger, Christian A1 - Schmidt, Dirk A1 - Lohse, Volkmar A1 - Negendank, Detlef A1 - Thévenin, D. T1 - Experimentelle Untersuchungen zur Schwergasausbreitung T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Schwergas KW - Sensortechnik KW - Experimentelle Daten PY - 2010 SN - 978-3-89746-119-2 IS - Paper M-02 SP - 1 EP - 10 CY - Frankfurt/M. AN - OPUS4-22350 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Köpp, Christian A1 - Drdácký, M. A1 - Hennen, C. A1 - Lanza, L. A1 - Golez, M. A1 - Kolymbas, D. A1 - Herle, I. A1 - Virsta, A. A1 - Binda, L. ED - Mufti, A. ED - Banthia, N. T1 - Protection of cultural heritage against flood (CHEF) - A European research project T2 - CSHM-3 - Conservation of heritage structures: using FRM and SHM CY - Ottawa, Canada DA - 2010-08-11 KW - Cultural heritage KW - Flood KW - Preventive measures KW - Humidity measurements KW - Knowledge transfer KW - Case study PY - 2010 SN - 978-0-88865-883-8 SP - 361 EP - 370 CY - Vancouver, Canada AN - OPUS4-22352 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schöne, Dieter A1 - Bork, Claus-Peter ED - Klingbeil, D. ED - Vormwald, M. ED - Eulitz, K.-G. T1 - Fatigue investigations of damaged railway rails of UIC 60 profile N2 - The development of procedures to calculate the service life of railway rails requires test results which describe the damage of rails thus affording their validation. Within the DEUFRAKO integrated project NOVUM, ten rail specimens were tested under constant and variable amplitude loads to investigate the propagation of lateral cracks and to ascertain the service life. The test conditions were based on real rail loading and were used in the 3-point-bending test frame under alternating stress. An eccentric notch was applied as pre-arranged damage in the 60 E1 (260) rail specimens. The notched rails showed a similar behaviour like rails with strong head checks damaged by rolling contact fatigue. T2 - 18th European conference on fracture (ECF 18) - Fracture of materials and structures from micro to macro scale CY - Dresden, Germany DA - 2010-08-30 KW - Railway rail KW - Notch KW - Service loading fatigue KW - Crack propagation KW - Bending KW - Damage PY - 2010 SN - 978-3-00-031802-3 IS - Paper 88 SP - 1 EP - 8 AN - OPUS4-22328 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Zerbst, Uwe A1 - Ainsworth, R. A. A1 - Madia, Mauro ED - Klingbeil, D. ED - Vormwald, M. ED - Eulitz, K.-G. T1 - Reference load versus limit load in engineering flaw assessment: A proposal for a hybrid analysis option N2 - The net section limit load FY is a key input parameter for the accuracy of any elastic-plastic flaw assessment procedure of the R6 type. Unfortunately available limit load solutions are of variable quality since they have been obtained over decades by different methods. As a consequence the results of the fracture analyses such as the critical load or crack size are limited in their accuracy and are often significantly conservative. A further problem is that common limit load solutions based on ligament yielding are inadequate in a number of cases even for through crack configurations and should be replaced by some kind of local yielding solutions. In the present paper a simple and straightforward reference load definition is proposed instead of the limit load which strictly corresponds to a ligament yielding parameter Lr = 1 in the R6 Routine and similar approaches such as SINTAP and FITNET. This can be determined by finite element simulation for any geometry. In addition to a previous study on thin wall notched plates the method is applied to plates containing shallow semi-elliptical surface cracks. The results demonstrate that the approach provides a suitable extension and improvement of the existing methods. T2 - 18th European conference on fracture (ECF 18) - Fracture of materials and structures from micro to macro scale CY - Dresden, Germany DA - 2010-08-30 KW - Flaw assessment KW - Reference stress method KW - R6 procedure KW - EPRI method KW - SINTAP KW - FITNET KW - Limit load KW - Reference load PY - 2010 SN - 978-3-00-031802-3 IS - Paper 81 SP - 1 EP - 11 AN - OPUS4-22329 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidtchen, Ulrich ED - Luschtinetz, T. ED - Lehmann, J. T1 - Ist Wasserstoff gefährlich? T2 - Klimaschutzkongress m-v / 17. Energie-Symposium "Nutzung regenerativer Energiequellen und Wasserstofftechnik" CY - Stralsund, Deutschland DA - 2010-11-04 KW - Wasserstoff PY - 2010 SN - 978-3-9813334-1-1 SP - 137 EP - 141 AN - OPUS4-22332 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfennig, Anja A1 - Linke, Barbara A1 - Kranzmann, Axel T1 - Carbon capture and storage technique (CCS): Reliability of pipe steels used in Ketzin, Germany verified in laboratory saline aquifer corrosion experiments N2 - During the compression emission gasses in deep geological layers (Carbon Capture and Storage, CCS) CO2-corrosion will become a relevant safety issue. The reliability of the steels used at the geological onshore CCS-site at Ketzin, Germany, (heat treated steel 42CrMo4 (1.7225, AISI 4140) used for casing, and the martensitic stainless injection pipe steels X46Cr13 (1.4034, AISI 420 C), X20Cr13 (1.4021, AISI 420 J), X35CrMo17 (1.4122)) is demonstrated in 1 and 2 years laboratory experiments. Samples were kept in a synthetic aquifer environment similar to the geological CCS-site at Ketzin, Germany at T=60 °C. This corrosive environment is then saturated with technical CO2 at a flow rate of 3 l/h. Microstructures were characterized by X-ray diffraction, light microscopy, scanning electron microscopy, and energy dispersive X-ray, after a series of heat treatments (700 h to 2 years). Due to very slow mass loss at extended exposure times to CCS-environment one year is sufficient to predict stable surface corrosion rates from laboratory experiments. The non-linear isothermal surface corrosion behaviour of the steels reveals surface corrosion rates around 0.1 to 0.8 mm/year, when obtained by mass gain. The loss of the base material is higher when calculated from the corrosion layer magnitude due to the unpredictable local corrosion attacks. Severe pit corrosion (pit heights ca. 4.5 mm) are only located on the high chromium steels. Main phases of the continuous scales are siderite FeCO3 and goethite α-FeOOH. The formation of the non-protective layer is likely to form via a transient Fe(OH)2-phase. T2 - MWWD & IEMES 2010 - 6th International conference on marine waste water discharges and coastal environment CY - Langkawi, Malaysia DA - 2010-10-25 KW - Saline aquiver KW - Environmental issues KW - CCS KW - CO2-injection KW - CO2-storage KW - Corrosion KW - Phase formation PY - 2010 SN - 978-9944-5566-4-4 IS - Paper 047_P SP - 1 EP - 17 AN - OPUS4-22333 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Hasenstab, A. A1 - Arndt, Ralf ED - Michaelsen, H. T1 - Mit Radar und Wärme - Zerstörungsfreie Untersuchung am Spindlerboden im Ovalen Kabinett KW - Parkett KW - Neues Palais KW - Radar KW - Aktive Thermografie PY - 2010 SN - 978-3-86568-462-2 SP - 245 EP - 250 PB - Michael Imhof AN - OPUS4-22356 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Heinrich, Sebastian A1 - Liebner, Christian A1 - Hieronymus, Hartmut A1 - Klemm, E. T1 - Durchführung heterogen katalysierter Selektivoxidationen im Explosionsbereich unter Einsatz von Mikrostrukturreaktoren T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Mikroreaktor KW - Oxidation KW - Explosion PY - 2010 SN - 978-3-89746-119-2 IS - P-03 SP - 1 EP - 6 CY - Frankfurt/M. AN - OPUS4-22359 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schälike, Stefan A1 - Vela-Wallenschus, Iris A1 - Wehrstedt, Klaus-Dieter A1 - Schönbucher, A. T1 - Vorhersage der kritischen thermischen Abstände von LNG-Poolfeuern N2 - Die Bedeutung von Flüssigerdgas (LNG, liquefied natural gas) ist durch die Erschließung entfernt liegender Resourcen und den damit verbundenen Transportwegen sowie durch die verbesserte Prozesstechnik bei der Verflüssigung (z.B. Mixed Fluid Cascade (MFC®) Verflüssigungsprozess) weltweit gestiegen. In den letzten Jahren sind zahlreiche neue Großanlagen wie die in Kollsnes, Hammerfest (beide Norwegen 2003, 2007), Kwinana (Australien 2008) und Shan Shan (China, 2004) mit Kapazitäten von bis 4.7 Mt/a entstanden. Das Gefährdungspotential von flüssigem Erdgas besteht neben dem niedrigen Siedepunkt Tb = −161 °C im Zündbereich zwischen 4.4 - 17 Vol.% sowie im großen Expansionsverhältnis. Bei einer störungsbedingten Freisetzung von LNG kann es somit zu Poolfeuer kommen, wodurch mit großem Schaden an benachbarten verfahrenstechnischen Anlagen und vor allem an Personen zu rechnen ist. T2 - 10. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" Köthen 2010 CY - Köthen/Frankfurt/M., Deutschland DA - 04.11.2010 KW - Anlagensicherheit KW - Umweltschutz KW - Sicherheitstechnik KW - Explosionsschutz KW - Poolfeuer KW - LNG KW - CFD-Simulation KW - Flammentemperatur KW - SEP PY - 2010 SN - 978-3-89746-119-2 N1 - Geburtsname von Vela-Wallenschus, Iris: Vela, I. - Birth name of Vela-Wallenschus, Iris: Vela, I. SP - 1 EP - 11 AN - OPUS4-22466 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Malaga, Katarina A1 - Müller, Urs ED - Castro-Borges, P. ED - Moreno, E.I. ED - Sakai, K. ED - Gjorv, O.E. ED - Banthia, N. T1 - Validation and improvement of procedures for performance testing of anti-graffiti agents on concrete surfaces N2 - Graffiti on concrete structures is an ongoing, costly and increasing problem. A number of various anti-graffiti agents available on the market are intended to be resistant to graffiti attack or provide a treatment that aids the removal of graffiti. In several European countries the testing of anti-graffiti agents on concrete structures is following the EN 1504-2. This method is not appropriate for the aimed result. The method tests if an anti-graffiti agent damages a concrete structure and focuses on drying index and frost resistance in comparison with untreated samples. The aspects of the efficacy against graffiti attack, other types of dirt and aesthetic changes due to anti-graffiti protection are not evaluated by the present method. Therefore a validation and improvement of the current method is proposed. T2 - CONSEC`10 - 6th International conference on concrete under severe conditions CY - Mérida, Yucatán, Mexico DA - 2010-06-07 KW - Anti-Graffiti-Systeme KW - Beton KW - Prüfmethoden PY - 2010 SN - 978-0-415-59316-8 SP - 709 EP - 716 PB - Taylor & Francis CY - London, UK AN - OPUS4-22438 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Korzen, Manfred A1 - Rodrigues, J.P.C. A1 - Correia, A.M. ED - Kodur, V. ED - Franssen, J.-M. T1 - Composite columns made of partially encased steel sections subjected to fire T2 - 6th International conference "Structures in fire" CY - East Lansing, Michigan, USA DA - 2010-06-02 KW - Fire resistance KW - Thermal restraint KW - Composite steel-concrete columns KW - Substructuring method KW - Restraining frame PY - 2010 SN - 978-1-60595-027-3 SP - 341 EP - 348 PB - DEStech Publications, Inc. CY - Lancaster, PA, USA AN - OPUS4-22482 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reichling, K. A1 - Raupach, M. A1 - Wiggenhauser, Herbert A1 - Stoppel, Markus A1 - Dobmann, G. A1 - Kurz, J. ED - Odile Abraham, ED - Dérobert, Xavier T1 - BETOSCAN - Robot controlled non-destructive diagnosis of reinforced concrete decks T2 - NDTCE `09 - 7th international symposium on non destructive testing in civil engineering CY - Nantes, France DA - 2009-06-30 KW - BetoScan KW - Betonflächendiagnose KW - Scanner KW - ZfP im Bauwesen KW - Automation KW - Corrosion KW - Potential mapping KW - Repair KW - Non destructive testing KW - Diagnosis PY - 2009 SN - 978-2-7208-2542-5 SN - 1628-4704 IS - Paper 77 SP - 425 EP - 432 AN - OPUS4-22487 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kurz, J. A1 - Rieder, H. A1 - Stoppel, Markus A1 - Taffe, Alexander ED - Odile Abraham, ED - Dérobert, Xavier T1 - Control and data acquisition of automated multi-sensor systems in civil engineering T2 - NDTCE `09 - 7th international symposium on non destructive testing in civil engineering CY - Nantes, France DA - 2009-06-30 KW - Multisensorik KW - Data acquisition KW - Betonflächendiagnose KW - Scanner KW - ZfP im Bauwesen KW - NDT KW - Diagnosis KW - Quality assurance KW - Multi-sensor KW - Automated data acquisition PY - 2009 SN - 978-2-7208-2542-5 SN - 1628-4704 IS - Paper 77 SP - 433 EP - 439 AN - OPUS4-22488 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reichling, K. A1 - Raupach, M. A1 - Stoppel, Markus A1 - Kurz, J. ED - Stark, J. T1 - BETOSCAN: Autonom navigierendes Robotersystem zur Diagnose von flächigen Stahlbetonbauteilen T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 KW - BetoScan KW - Betonflächendiagnose KW - Scanner KW - ZfP im Bauwesen PY - 2009 SN - 978-3-00-027265-3 IS - 3.06 SP - 1 EP - 6(?) CY - Weimar AN - OPUS4-22489 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, A. A1 - Osterloh, Kurt ED - Michaelsen, H. T1 - Ohne Schäden in die Tiefe - Zerstörungsarme und zerstörungsfreie Verfahren zur Untersuchung von Holz KW - Diaphragm for high energy radiation KW - X-ray backscatter technology KW - Unilateral access KW - Security application PY - 2010 SN - 978-3-86568-462-2 SP - 474 EP - 479 PB - Michael Imhof AN - OPUS4-22537 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Martin A1 - Ferrero, Fabio A1 - Malow, Marcus A1 - Krause, Ulrich T1 - Vermeidung der Brandentstehung bei der Lagerung von Biomasse T2 - VDI-Fachtagung - Sichere Handhabung brennbarer Stäube CY - Nürnberg, Deutschland DA - 2010-11-16 KW - Selbstentzündung KW - Biomasse KW - Numerische Simulation KW - Brandvermeidung PY - 2010 SN - 978-3-18-092096-2 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 2096 SP - 87 EP - 98 AN - OPUS4-22501 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Kind, Thomas A1 - Stoppel, Markus A1 - Kurz, J.H. ED - Gieler-Breßmer, S. T1 - Zuverlässige Bewehrungsortung: Vom klassischen Handgerät zum automatisierten Bauwerkscanner T2 - 8. Symposium "Kathodischer Korrosionsschutz von Stahlbetonbauwerken" CY - Ostfildern, Deutschland DA - 2010-11-18 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Kathodischer Korrsoionsschutz KW - Ortung von Bewehrung KW - Wirbelstrom KW - Radar KW - Ultraschallecho PY - 2010 SN - 3-924813-88-4 SP - 21 EP - 33 AN - OPUS4-22547 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friese, Martin A1 - Roder, C. A1 - Effner, Ute A1 - Mielentz, Frank T1 - Quality control for crack repair - a new approach using ultrasonic imaging T2 - NDE/NDT for highways and bridges - Structural materials technology CY - New York, NY, USA DA - 2010-08-16 KW - Zerstörungsfreie Prüfung KW - Ultraschall KW - Risse KW - Erfolgskontrolle Rissinjektion PY - 2010 SN - 978-1-57117-211-2 SP - 374 EP - 382 AN - OPUS4-22549 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friese, Martin A1 - Effner, Ute A1 - Nowak, Thomas Rudolf A1 - Mielentz, Frank T1 - Erfolgskontrolle von Rissinjektionen durch Ultraschallmessungen T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - Zerstörungsfreie Prüfung KW - Ultraschall KW - Risse KW - Erfolgskontrolle Rissinjektion PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 (Poster 05) SP - 1 EP - 10 CY - Berlin AN - OPUS4-22550 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krietsch, Arne A1 - Scheid, Marc A1 - Lasry, M. A1 - Suter, G. A1 - Teske, H.-J. A1 - Stahmer, K.W. A1 - Arnold, A. A1 - Nemcak, O. A1 - Cesana, C. A1 - Siwek, R. ED - Suter, G. ED - de Rademaeker, E. T1 - Validation of alternative igniters for the determination of explosion characteristics of dust clouds in 20-l-sphere and 1-m³-vessel T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - Brenn- und Explosionskenngrößen KW - Bestimmungsmethoden KW - 20-l-Kugel KW - 1-m³-Behälter PY - 2010 SN - 978-90-76019-291 VL - 2 SP - 227 EP - 233 CY - Brugge, Belgium AN - OPUS4-22620 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schoßig, Jörg A1 - Schmidt, Martin A1 - Krause, Ulrich A1 - Steinbach, J. T1 - Beurteilung des Selbstentzündungsverhaltens brennbarer Stäube mit Hilfe adiabatischer Warmlagerung T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Anlagensicherheit KW - Umweltschutz KW - Sicherheitstechnik KW - Explosionsschutz PY - 2010 SN - 978-3-89746-119-2 SP - 1 EP - 7(?) CY - Frankfurt/M. AN - OPUS4-22621 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stempniewski, L. A1 - Münich, C. A1 - Urban, M. A1 - Messervey, T. A1 - Zangani, D. A1 - Liehr, Sascha A1 - Sasek, L. ED - Mufti, A. ED - Banthia, N. T1 - Shaking table test of a two-storey stone masonry building reinforced with multifunctional textiles T2 - CSHM-3 - Conservation of heritage structures: using FRM and SHM CY - Ottawa, Canada DA - 2010-08-11 KW - Multiaxial textile KW - Fiber reinforced cement KW - Fiber matrix system KW - Shaking table tests KW - Polymer optical fibre KW - Fiber Bragg gratings PY - 2010 SN - 978-0-88865-883-8 SP - 71 EP - 81 CY - Vancouver, Canada AN - OPUS4-22605 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Steinbeck, G. A1 - Bleck, W. A1 - Bork, Claus-Peter A1 - Evertz, T. A1 - Frehn, A. A1 - Masendorf, R. A1 - Sonsino, C.M. ED - Palkowski, H. T1 - Ermittlung von Berechnungskennwerten an Karosseriestählen - Bericht über ein Gemeinschaftsprojekt der Stahl- und Automobilindustrie T2 - 4. Industriekolloquium - SFB 362 Fertigen in Feinblech - Werkstoffe Verfahren Konzepte CY - Bad Harzburg, Deutschland DA - 2004-02-11 KW - Karosseriestähle KW - Berechnung KW - Kennwerte PY - 2004 SN - 3937057056 VL - 1 IS - 2 SP - 127 EP - 136 PB - GRIPS media AN - OPUS4-22600 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hauswaldt, Sebastian A1 - Korzen, Manfred T1 - A constitutive model for use in finite element simulations in structural fire design T2 - 11th International symposium on fire protection CY - Leipzig, Germany DA - 2010-06-08 KW - Steel KW - Fire KW - Constitutive model KW - Eurocode KW - Creep KW - Finite element simulation KW - ABAQUS KW - UMAT KW - Deformation theory of plasticity PY - 2010 SP - 1 EP - 9(?) AN - OPUS4-22683 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Steinborn, Gabriele A1 - Scheler, S. A1 - Lehmann, J. T1 - Particle size determination at different concentrated Al2O3 and SiO2 nanopowder suspensions with the ultrasonic spectrometer DT 1200 T2 - WCPT6 2010 - World congress on particle technology CY - Nürnberg, Germany DA - 2010-04-26 KW - Partikelgrößenbestimmung KW - Zetapotential KW - Nanopulver PY - 2010 SN - 978-3-00-030570-2 IS - H H 1 0 00312 SP - 1 EP - 4 AN - OPUS4-22727 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Anka A1 - Krüger, Simone A1 - Krause, Ulrich T1 - Chemisch-analytische Untersuchung von Brandprodukten aus verschiedenen Deponiefraktionen T2 - 4. Praxistagung Deponie 2010 CY - Hannover, Deutschland DA - 2010-11-30 KW - Recyclingstoffe KW - Zwischenlager KW - FTIR-Spektroskopie KW - Verschwelung KW - Rauchgasanalyse KW - Recycling materials KW - Intermediate storage KW - FTIR-spectroscopy KW - Smouldering KW - Analysis of smoke PY - 2010 SN - 978-3-86955-555-3 SP - 1 EP - 17(?) AN - OPUS4-22728 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Narbonneau, F. A1 - De Jonckheere, J. A1 - Jeanne, M. A1 - Kinet, D. A1 - Witt, Jens A1 - Krebber, Katerina A1 - Paquet, B. A1 - Depré, A. A1 - D´Angelo, L.T. A1 - Thiel, T. A1 - Logier, R. ED - Popp, J. T1 - OFSETH: Optical technologies embedded in smart medical textile for continuous monitoring of respiratory motions under magnetic resonance imaging N2 - The potential impact of optical fiber sensors embedded into medical textiles for the continuous monitoring of the patient during Magnetic Resonance Imaging (MRI) is now proved. We report how two pure optical technologies can successfully sense textile elongation between, 0% and 3%, while maintaining the stretching properties of the textile substrates for a good comfort of the patient. Investigating influence of different patients' morphology as well as textile integration issues to let free all vitals organs for medical staff actions, the OFSETH harness allows a continuous measurement of respiration movements. For example, anaesthesia for MRI examination uses the same drugs as for any surgical procedure. Even if spontaneous respiration can be preserved most of the time, spontaneous respiration is constantly at risk of being impaired by anaesthetic drugs or by upper airway obstruction. Monitoring of the breathing activity is needed to assess adequate ventilation or to detect specific obstruction patterns. Moreover artefacts due to physiological motions induce a blooming effect on the MRI result. The use of synchronisation devices allows reducing these effects. Positioned at certain strategic places according to the investigated organ, the presented sensors could constitute an efficient and adapted solution for respiratory synchronisation of the MRI acquisition. KW - MRI KW - Smart textile KW - Healthcare monitoring KW - Optical sensor KW - FBG KW - Respiratory sensor PY - 2010 SN - 9780819481887 DO - https://doi.org/10.1117/12.854386 VL - 7715 SP - 77151D-1 - 77151D-12 AN - OPUS4-22839 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hamann, Andreas A1 - Löwe, Peter ED - Pohl, M. T1 - Charakterisierung eines lokalen dehnratenabhängigen Deformationsverhaltens durch Hochgeschwindigkeitszugversuche mit konstanter Kolbengeschwindigkeit am Beispiel von Polykarbonat T2 - Tagung Werkstoffprüfung 2010 CY - Neu-Ulm, Deutschland DA - 2010-12-02 KW - Lokale Werkstoffcharakterisierung KW - Dehnratenabhängiges Deformationsverhalten KW - Werkstoffversagen KW - Dissipation KW - Polykarbonat PY - 2010 SN - 978-3-514-00778-9 SP - 269 EP - 274 PB - Verl. Stahleisen GmbH CY - Düsseldorf AN - OPUS4-22842 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Madia, Mauro A1 - Riesch-Oppermann, H. A1 - Zerbst, Uwe A1 - Beretta, S. ED - Klingbeil, D. ED - Vormwald, M. ED - Eulitz, K.-G. T1 - A new full-probabilistic framework for the structural integrity assessment of structures containing cracks T2 - 18th European conference on fracture (ECF 18) - Fracture of materials and structures from micro to macro scale CY - Dresden, Germany DA - 2010-08-30 KW - Structural integrity KW - SINTAP KW - FITNET KW - Reliability KW - FORM PY - 2010 SN - 978-3-00-031802-3 IS - C.02.1-3 / #306 SP - 1 EP - 10 AN - OPUS4-22843 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Scheid, Marc A1 - Siwek, R. T1 - Brand- und Explosionsschutz an Entstaubungsanlagen - Neue VDI-Richtlinien 2263 Blatt 6 und 6.1 T2 - VDI-Fachtagung - Sichere Handhabung brennbarer Stäube CY - Nürnberg, Deutschland DA - 2010-11-16 KW - Entstaubungsanlagen KW - VDI-Richtlinie 2263 KW - Absauganlagen KW - Explosionsgefahren KW - Risikobeurteilung KW - Explosionsschutzmaßnahmen PY - 2010 SN - 978-3-18-092096-2 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 2096 SP - 167 EP - 183 AN - OPUS4-22762 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfuch, A. A1 - Horn, K. A1 - Mix, Renate A1 - Ramm, M. A1 - Heft, A. A1 - Schimanski, A. ED - Suchentrunk, R. T1 - Direct and remote plasma assisted CVD at atmospheric pressure for the preparation of oxide thin films N2 - In this paper the preparation of silicon and titanium oxide thin films using an atmospheric pressure plasma process will be reported. To obtain these oxide films hexamethyldisiloxane and titanium tetraisopropoxide were used as precursor materials. Based on the different chemical reaction mechanisms the film deposition processes were carried out in the direct as well as in the remote PACVD mode. The deposition parameters were varied and the influence on different film properties was studied. The deposited oxide films were characterised by profilometry, ellipsometry, SEM, UV-VIS-NIR-transmission measurements. FT-IR spectroscopy and contact angle measurements. Additionally, first results will be presented concerning the creation of composite films using a combination of plasma and liquid dye nebulization technique. KW - FTIR KW - Ellipsometry KW - Profilometry KW - SEM KW - PACVD KW - Silicon oxide PY - 2010 SN - 978-3-87480-259-8 VL - 66 SP - 114 EP - 124 PB - Eugen G. Leuze CY - Bad Saulgau AN - OPUS4-22798 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Raupach, M. T1 - Einfluss ausgewählter Modifikationen der Mischungszusammensetzung auf die Eigenschaften von Instandsetzungsmörteln N2 - Trotz der zahlreichen Möglichkeiten zur Beeinflussung der Mörteleigenschaften durch Mischungsmodifikationen ist es nahezu unmöglich, einzelne Eigenschaften unabhängig von anderen zu verändern. Bei einer Mischungsoptimierung muss im Einzelfall immer entschieden werden, welcher der gewünschten Eigenschaften die höchste Priorität zukommt. Anhand von Parameterstudien wird im vorliegenden Artikel verdeutlicht, wie es für bestimmte Anwendungen sinnvoll sein kann, die Verschlechterung einzelner Eigenschaften zu akzeptieren, wenn dadurch eine für den speziellen Einsatzfall essenzielle Eigenschaft verbessert werden kann. Die komplexen Wechselwirkungen der einzelnen Bestandteile fuhren dazu, dass auch scheinbar widersprüchliche Kombinationen von Zusatzmitteln im Einzelfall erforderlich werden können. Zur Anpassung der meisten Mörteleigenschaften gibt es verschiedene Möglichkeiten der Zielerreichung mit jeweils unterschiedlichen Nebeneffekten. Frisch- und Festmörteleigenschaften sind dabei gleichermaßen zu beachten. T2 - 2. Kolloquium "Erhaltung von Bauwerken" CY - Ostfildern/Stuttgart, Germany DA - 25.01.2011 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - Polymer cement mortar (PCC) KW - Sprayed polymer cement mortar (SPCC) PY - 2011 SN - 3-924813-87-6 SP - 213 EP - 221 AN - OPUS4-23218 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Goedecke, Thomas A1 - Bethke, John A1 - Jahnke, Wolfgang A1 - Otremba, Frank ED - Karl-Friedrich Ziegahn, T1 - Ermittlung explosionsfähiger Gemische beim Gefahrguttransport unter normalen Beförderungsbedingungen T2 - 38. Jahrestagung der GUS 2009 - Umwelteinflüsse erfassen, simulieren, bewerten CY - Karlsruhe DA - 2009-03-18 KW - Permeation KW - Packagings for dangerous goods KW - Freight containers KW - Explosive atmosphere KW - Solvents PY - 2009 SN - 978-3-9810472-7-1 IS - V 19 SP - 227 EP - 237 PB - DWS Werbeagentur und Verlag GmbH CY - Karlsruhe AN - OPUS4-23256 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gebhardt, Moritz Oliver A1 - Quiroz Penaranda, Vanessa A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael ED - Cerjak, H. ED - Enzinger, N. T1 - Restraint effects on stresses and strains in single-run high power laser beam welding of thick plates KW - Laserstrahlschweißen KW - Heißrisse KW - Einspannung PY - 2010 SN - 978-3-85125-127-2 SP - 1011 EP - 1033 PB - Verlag der Technischen Universität Graz AN - OPUS4-23301 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schilder, Constanze A1 - Kohlhoff, Harald A1 - Hofmann, Detlef A1 - Habel, Wolfgang T1 - Structure-integrated fibre optic AE sensor for concrete pile testing and monitoring N2 - A highly resolving fibre optic sensor based on the Fabry-Perot technology has been developed for integration into concrete piles with the purpose of static and dynamic pile testing as well as monitoring. The paper presents the design of the sensitive element and first results of large-scale model pile tests. T2 - Photonics 2010 - 10th International conference on fiber optics & photonics CY - Guwahati, India DA - 2010-12-11 KW - Concrete-embedded fibre optic sensors KW - Fabry Perot sensor KW - Strain measurement KW - Dynamic pile testing KW - Pile integrity KW - Cast-in-place bored piles PY - 2010 SN - 978-81-309-1719-1 IS - 256_SEN_Schilder_C_1_full SP - 1 EP - 4 AN - OPUS4-23272 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hennecke, Manfred A1 - Sabelus, Silke T1 - Intramolecular excimers in vinylarylpolymers - Influence of molecular weight and tacticity T2 - ACS Fall National Meeting CY - Washington, D.C., USA DA - 1994-08-21 PY - 1994 SN - 0-8412-2955-4 SN - 0743-0515 N1 - Serientitel: Polymeric materials science and engineering – Series title: Polymeric materials science and engineering VL - 71 SP - 421 EP - 422 PB - ACS Publ. CY - Washington, DC AN - OPUS4-23228 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hennecke, Manfred A1 - Damerau, Thomas ED - Urban, M. W. ED - Provder, T. T1 - Photophysical behavior of phenylene-vinylene-polymers as studied by polarized fluorescence spectroscopy T2 - ACS Fall National Meeting CY - Washington, D.C., USA DA - 1994-08-21 PY - 1995 SN - 0-8412-3262-8 SN - 0097-6156 N1 - Serientitel: ACS Symposium Series – Series title: ACS Symposium Series SP - 446 EP - 457 PB - American Chemical Society CY - Washington, DC AN - OPUS4-23232 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hennecke, Manfred A1 - Damerau, Thomas T1 - Photophysical behavior of phenylene-vinylene-polymers as studied by polarized fluorescence spectroscopy T2 - ACS Fall National Meeting CY - Washington, D.C., USA DA - 1994-08-21 PY - 1994 SN - 0-8412-2955-4 SN - 0743-0515 N1 - Serientitel: Polymeric materials science and engineering – Series title: Polymeric materials science and engineering VL - 71 SP - 75 EP - 76 PB - ACS Publ. CY - Washington, DC AN - OPUS4-23236 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Plewinsky, Bodo A1 - Hennecke, Manfred A1 - Oppermann, W. ED - Czichos, Horst ED - Hennecke, Manfred T1 - Chemie PY - 2008 SN - 978-3-540-71851-2 DO - https://doi.org/10.1007/978-3-540-71852-9_3 SP - C1 EP - C114 PB - Springer CY - Berlin AN - OPUS4-23242 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pittner, Andreas A1 - Schwenk, Christopher A1 - Weiß, D. A1 - Rethmeier, Michael ED - Cerjak, H. ED - Enzinger, N. T1 - An efficient solution of the inverse heat conduction problem for welding simulation PY - 2010 SN - 978-3-85125-127-2 SP - 761 EP - 791 PB - Verlag der Technischen Universität Graz AN - OPUS4-23154 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Staude, Andreas A1 - Krah, T. A1 - Goebbels, Jürgen A1 - Büttgenbach, S. T1 - Ein dreidimensionaler Prüfkörper für die Lunkererkennung in Gussteilen mittels Computertomographie T2 - Fachtagung Industrielle Computertomografie - Zerstörungsfreie Bauteilprüfung, 3D-Materialcharakterisierung und Geometriebestimmung CY - Wels, Österreich DA - 2010-09-27 KW - Computertomographie KW - Gussteile KW - Gussdefekte KW - Lunker KW - Prüfkörper PY - 2010 SN - 978-3-8322-9418-2 SN - 1610-4773 SP - 79 EP - 84 PB - Shaker Verlag GmbH CY - Aachen AN - OPUS4-23176 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Karkhin, V.A. A1 - Pittner, Andreas A1 - Schwenk, Christopher A1 - Rethmeier, Michael ED - Makhnenko, V.I. T1 - Heat source models in simulation of heat flow in fusion welding T2 - 5th International Conference - Mathematical modelling and information technologies in welding and related processes CY - vil. Katsiveli, Crimea, Ukraine DA - 2010-05-25 PY - 2010 SN - 978-966-8872-15-0 SP - 56 EP - 60 CY - Kiev, Ukraine AN - OPUS4-23382 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hahn, Oliver ED - Trost, V. ED - Pataki-Hundt, A. ED - Huhsmann, E. T1 - Die Farben und Tinten im Stuttgarter Psalter - Naturwissenschaftliche Untersuchungen N2 - Die Miniaturen des Stuttgarter Psalters bestechen nicht nur durch ihre Originalität, sondern auch durch ihre außerordentliche Farbigkeit. Seit Urzeiten benutzen die Menschen farbige Substanzen, um Bilder entstehen zu lassen. Von den zahlreichen Quellen, die von der Gewinnung und Herstellung von Farben handeln, soll hier nur kurz berichtet werden. Eine ausführliche Darstellung über antike und frühmittelalterliche Rezeptsammlungen findet sich an anderer Stelle in diesem Katalog. Bereits seit der Antike gibt es eine Tradition, Zubereitungs- und Verarbeitungsrezepturen zu sammeln. So berichtet Theophrast im 4. Jahrhundert n. Chr. über mineralische Farbmittel, zahlreiche Informationen lassen sich auch aus dem 25 V. Chr. entstandenen Architekturtraktat des Vitruv und der etwa achtzig Jahre jüngeren Naturgeschichte des Plinius gewinnen. Aus dem 3. Jahrhundert sind dann erstmals auf drei griechischen Papyri echte Rezepturen zur Farbherstellung überliefert. Die außerordentliche Rezeptsammlung der Mappae Clavimla und die Handschrift Lucca, eine Sammlung kunsttechnologischer Rezepte, sind vermutlich ebenso griechischen Ursprungs. Das wachsende Interesse an diesen Rezeptsammlungen dokumentiert sich in zahlreichen Kopien, die im weiteren Verlauf nicht nur in Latein sondern in der entsprechenden Volkssprache verfasst wurden (Fuchs und Oltrogge 1998). KW - Röntgenfluoreszenzanalyse KW - VIS-Spektroskopie KW - Zerstörungsfreie Prüfung PY - 2011 SN - 978-3-88282-072-0 SP - 111 EP - 121 CY - Stuttgart AN - OPUS4-23657 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maskos, Michael A1 - Berger, Georg A1 - Braun, Ulrike A1 - Heyn, Andreas A1 - Klinger, Christian A1 - Wachtendorf, Volker T1 - Schadensanalyse und Beständigkeit von Materialien in biomedizinischen Einsatzgebieten N2 - Der Anteil von Polymeren als Funktions- und Konstruktionswerkstoffe in dauerhaften medizinischen Anwendungen steigt beständig. Derartige Materialien müssen den mechanischen, biologischen und chemischen Bedingungen im Körper widerstehen (u.a. Abrieb, Hydrolyse, Degradation) und gleichzeitig gut verträglich sein. Der sichere Einsatz von polymeren Materialien erfordert die Kenntnisse über ihre Langzeitstabilität unter verschiedenen äußeren Bedingungen. Diese sind nicht nur beeinflusst durch die unmittelbare Umgebung in vivo, sondern auch durch die Historie der verwendeten Materialien. Dazu zählen u. a. erhöhte Temperaturen unter sauerstoffhaltiger Atmosphäre während der Verarbeitung oder die Exposition von ionisierender Strahlung oder reaktiven Radikalen während der Sterilisation. PY - 2011 SP - 83 EP - 85 CY - Berlin AN - OPUS4-23592 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bartholmai, Matthias A1 - Köppe, Enrico A1 - Kammermeier, Michael A1 - Werner, Klaus-Dieter A1 - Homfeld, S.D. T1 - Funkbasiertes Sensornetzwerk zur Schadensfrüherkennung an Bauwerken T2 - Wireless Automation : funkgestützte Kommunikation in der industriellen Automatisierungstechnik ; Tagung Berlin CY - Berlin, Deutschland DA - 2008-02-28 KW - Funksensorik KW - Sensornetzwerk KW - Schadensfrüherkennung KW - Strukturüberwachung PY - 2008 SN - 978-3-18-092010-8 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 2010 SP - 117 EP - 125 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-17137 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Arndt, Ralf ED - Vladimir P. Vavilov, ED - Douglas D. Burleigh, T1 - Square pulse thermography in frequency domain N2 - In this paper a new approach for quantitative non-destructive testing (NDT) of near-surface structures in civil engineering (CE) with active thermography is presented. It adopts the method known as pulsed phase thermography (PPT) for the special requirements of NDT-CE and was developed in a German research project of the Federal Institute for Materials Research and Testing (BAM) in cooperation with the Technical University of Berlin. The new quantitative concept that might be understood as a square pulse thermography in frequency domain or an amplitude-expanded PPT with square pulse heating is based on the thermal diffusivity of the material and the characteristic frequency of the negative maximum phase and amplitude contrast. It aims at complementing the established approaches for defects depth calculation for measurements with long heating and observation times quite usual at active thermography in CE but is easily extendable to other fields of application. After an introduction to the basics of active thermography in CE and the thermography concept of BAM, qualitative results of several case studies will be presented. The main focus of the last section of this contribution is on applications of the new quantitative approach at test specimens of BAM to determine the concrete cover of artificially manufactured defects. KW - Square pulse heating KW - Civil engineering KW - Pulse phase thermography KW - Quantitative method KW - Frequency domain PY - 2008 SN - 978-0-8194-7179-6 DO - https://doi.org/10.1117/12.777697 SN - 0277-786X VL - 6939 IS - CD-ROM SP - 69390X-1 - 69390X-12 AN - OPUS4-17500 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Arndt, Ralf A1 - Gaulke, A. ED - Vladimir P. Vavilov, ED - Douglas D. Burleigh, T1 - Thermography investigations and numerical analysis of turbulent and laminar flow at light weight structures N2 - Thermography (IR) allows global visualization of temperature distribution on surfaces with high accuracy. This potential can be used for visualization of fluid mechanics effects at the intersection of laminar and turbulent flows, where temperature jumps appear due to convection and friction i.e. for the optimization in the design of airplane geometries. In civil engineering too it is the aspiration of the modern engineer of light weight structures to meet singular loads like wind peaks rather by intelligent structures and materials than by massive structures. Therefore the "Institute of Conceptual and Structural Design" of the Technical University of Berlin (TUB) is working on the development of adaptive structures, optimized geometry and intelligent microstructures on surfaces of structural elements. The paper shows the potential of modern computational fluid dynamics (CFD) in combination with thermography (IR) to optimize structures by visualization of laminar-tumultuous border layer currents. Therefore CFD simulations and IR wind tunnel experiments will be presented and discussed. For simulations and experiments - artificial and structural elements of the cable-stayed Strelasund Bridge, Germany, are used. KW - Light weight structures KW - Civil engineering KW - Computational fluid dynamics KW - Micro structures KW - Wind tunnel thermography PY - 2008 SN - 978-0-8194-7179-6 DO - https://doi.org/10.1117/12.777709 SN - 0277-786X VL - 6939 IS - CD-ROM SP - 69390M-1 - 69390M-11 AN - OPUS4-17501 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lohrer, Christian A1 - Drame, Christian A1 - Arndt, Detlef A1 - Grätz, Rainer A1 - Schönbucher, A. T1 - Explosion processes and DDT of various flammable gas/air mixtures in long closed pipes containing obstacles T2 - Hazards XX - "Process Safety and Environmental Protection" CY - Manchester, UK DA - 2008-04-15 KW - Deflagration KW - Detonation KW - DDT KW - MESG KW - Obstacles PY - 2008 SN - 978-0-85295-523-9 IS - Symposium Series No. 154 SP - 247 EP - 261 AN - OPUS4-17451 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Heyn, Andreas A1 - Burkert, Andreas A1 - Göllner, J. T1 - Der Einfluss des Oberflächenzustandes auf die Initiierung örtlicher Korrosion T2 - 3-Länder-Korrosionstagung - "Korrosion nichtrostender Stähle - Auf die Oberfläche kommt es an!" CY - Wien, Österreich DA - 2008-04-24 KW - Oberfläche KW - Passivität KW - Passivschicht KW - Nichtrostender Stahl KW - Örtliche Korrosion KW - Elektrochemisches Rauschen PY - 2008 SN - 978-3-935406-35-2 SP - 46 EP - 54 AN - OPUS4-17467 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfennig, Anja A1 - Kranzmann, Axel ED - Roland Span, ED - Ingo Weber, T1 - Effect of CO2 on the stability of steels with 1% and 13% Cr in saline water T2 - 15th International Conference on the Properties of Water and Steam (ICPWS XV), "Water, Steam, and Aqueous Solutions - Advances in Science and Technology for Power Generation" CY - Berlin, Germany DA - 2008-09-07 KW - Steel KW - Corrosion KW - Injection tube KW - Carbonate scale KW - CO2-storage KW - CO2-injection PY - 2008 SN - 978-3-931384-64-7 IS - Session 06: Electro-12 SP - 1 EP - 11 AN - OPUS4-17869 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molnarne, Maria T1 - How the uncertainty in measurement influences the derived explosion characteristics - Examples from the TRIANGLE program T2 - 28th International Workshop on Chemical Engineering Mathematics CY - Meissen, Germany DA - 2008-08-17 KW - Explosion limit KW - Oxidizing ability KW - CHEMSAFE KW - Flammability limit KW - Explosion protection KW - TRIANGLE KW - Messunsicherheiten PY - 2008 SN - 978-963-420-960-7 SP - 29 EP - 32 CY - Budapest, Hungary AN - OPUS4-17858 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Akkerman, Floris A1 - Mordziol, C. A1 - Oehme, I. ED - Reichl, H. ED - Nissen, N. F. ED - Müller, J. ED - Deubzer, O. T1 - Implementing the EuP Directive - Impressions from Germany T2 - Joint International Congress and Exhibition - "Electronics Goes Green 2008+" - Merging Technology and Sustainable Development CY - Berlin, Germany DA - 2008-09-07 KW - Ökodesign KW - EuP-Richtlinie KW - Energiebetriebene - Produkte - Gesetze KW - Energieeffizienz PY - 2008 SN - 978-3-8167-7668-0 SP - 83 EP - 88 PB - Fraunhofer IRB Verl. CY - Stuttgart AN - OPUS4-17878 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Binda, L. A1 - Maierhofer, Christiane ED - L. Binda, ED - M. Drdacky, ED - Kasal, B. T1 - Strategies for the assessment of historic masonry structures T2 - NSF/MSMT supported US-Czech project and RILEM Workshop - "In-Situ Evaluation of Historic Wood and Masonry Structures" CY - Prague, Czech Republic DA - 2006-07-10 KW - Non-destructive testing KW - Historic buildings KW - Masonry KW - Structure KW - Moisture KW - Combination of methods KW - Strategies PY - 2006 SN - 978-80-86246-36-9 SP - 86 EP - 104 AN - OPUS4-17889 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz T1 - Static and dynamic soil-structure interaction of finite and infinite beams and plates, tracks and piles T2 - 7th European Conference on Structural Dynamics, EURODYN 2008 CY - Southampton, UK DA - 2008-07-07 KW - Soil-structure interaction KW - Wave-number integrals KW - Finite-element boundary-element method KW - Moving loads on tracks KW - Pile-soil interaction PY - 2008 SN - 9780854328826 IS - E 102 SP - 1 EP - 12 AN - OPUS4-18236 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maack, Stefan A1 - Krause, Martin ED - L. Binda, ED - M. di Prisco, ED - R. Felicetti, T1 - Diagnostic investigations of wooden structures using ultrasonic-echo technique T2 - First Internatonal RILEM Symposium "on Site Assessment of Concrete, Masonry and Timber Structures" (SACoMaTiS 2008) CY - Varenna, Italy DA - 2008-09-01 PY - 2008 SN - 978-2-35158-063-9 VL - 2 IS - PRO 59 SP - 1 EP - 10 PB - RILEM Publications AN - OPUS4-18219 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Berger, Wolfgang ED - Litz, N. ED - Wilcke, W. ED - Wilke, B.-M. T1 - Thermische Bodenbehandlung KW - Bodenbehandlung KW - Desorption KW - Pyrolyse KW - Verbrennung PY - 2008 SN - 978-3-527-32341-8 IS - Abschnitt IV-3.1.2 SP - 1 EP - 11 PB - Wiley-VCH CY - Weinheim AN - OPUS4-18185 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Riedl, Martin ED - Jadwiga W. Lukaszewicz, ED - Piotr Niemcewicz, T1 - Volcanic tuff from Ettringen, Germany and its interaction with agents used for stone conservation T2 - 11th International Congress on Deterioration and Conservation of Stone CY - Torun, Poland DA - 2008-09-15 KW - Volcanic tuff KW - Consolidation KW - Ethyl silicate KW - Swelling reducer KW - Hygric expansion PY - 2008 SN - 978-83-231-2237-1 VL - II SP - 1001 EP - 1009 PB - Nicolaus Copernicus University Press CY - Torun, Poland AN - OPUS4-18175 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Noll, Matthias A1 - Schmidt, Bernd A1 - Malow, Marcus A1 - Schmidt, Martin T1 - Experimentelle und numerische Analyse des Selbstentzündungsverhalten von Holzhalden T2 - 9. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Deutschland DA - 2008-11-06 KW - Brandvermeidung KW - Biomasse KW - Lagerung KW - Schüttgüter KW - Selbstentzündung PY - 2008 SN - 978-3-89746-099-7 SP - 1 EP - 21 PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-18305 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Staude, Andreas A1 - Goebbels, Jürgen A1 - Bartscher, M. A1 - Hilpert, U. A1 - Koch, M. A1 - Reinhart, C. T1 - Genauigkeitssteigerung der Defekterkennung in Gussteilen mit Computertomographie (CT) am Beispiel eines Aluminium-Zylinderkopfsegments T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung CY - St. Gallen, Schweiz DA - 2008-04-28 PY - 2008 SN - 978-3-940283-09-2 IS - DGZfP-BB 113 (Di.2.A.3) SP - 1 EP - 7 AN - OPUS4-18297 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nöther, Nils A1 - Wosniok, Aleksander A1 - Krebber, Katerina ED - Francis Berghmans, ED - Mignani, Anna Grazia ED - Cutolo, Antonello ED - Patrick P. Meyrueis, ED - Thomas P. Pearsall, T1 - A distributed fiber optic sensor system for dike monitoring using Brillouin frequency domain analysis T2 - Optical Sensors 2008, April 7-10, 2008 CY - Strasbourg, France DA - 2008-04-07 KW - BOFDA KW - Brillouin sensing KW - Distributed strain measurement KW - Dike monitoring KW - Sensor-based geotextiles KW - Fibre optic sensors KW - Distributed sensors KW - Brillouin scattering PY - 2008 SN - 978-0-8194-7201-4 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 7003 SP - 700303-1 - 700303-9 PB - SPIE CY - Bellingham AN - OPUS4-18274 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schallert, M. A1 - Habel, Wolfgang A1 - Göbel, I.R. A1 - Stahlmann, J. A1 - Wardinghus, P. ED - J.A. Santos, T1 - Dynamic and static testing of concrete foundation piles with structure-integrated fiber optic sensors T2 - 8th International Conference on the Application of Stress Wave Theory to Piles - Science, Technology and Practice CY - Lisbon, Portugal DA - 2008-09-08 KW - Concrete-embedded fiber optic sensors KW - Fabry-Perot sensor KW - Pile integrity testing (PIT) KW - Dynamic load testing (DLT) KW - Numerical modeling KW - Precast driven piles PY - 2008 SN - 978-1-58603-909-7 SP - 625 EP - 634 PB - IOS Press AN - OPUS4-18275 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schuler, S. A1 - Habel, Wolfgang A1 - Hillemeier, B. ED - Wei Sun, ED - K. van Breugel, ED - Changwen Miao, ED - Guang Ye, ED - Huisu Chen, T1 - Embedded fibre optic micro strain sensors for assessment of shrinkage at very early ages T2 - 1st International Conference on Microstructure Related Durability of Cementitious Composites CY - Nanjing, China DA - 2008-10-13 KW - Cementitious materials KW - Early-age deformations KW - Fibre optic sensors KW - High-performance concrete KW - Microstructure KW - Durability PY - 2008 SN - 978-2-35158-067-7 VL - 2 IS - PRO 61 SP - 1377 EP - 1387 PB - RILEM Publications AN - OPUS4-18276 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wosniok, Aleksander A1 - Nöther, Nils A1 - Krebber, Katerina A1 - Thiele, E. T1 - Distributed monitoring of mechanical deformation in river dikes T2 - EUROSENSORS XXII CY - Dresden, Germany DA - 2008-09-07 KW - Fiber optic sensor KW - Distributed Brillouin sensor KW - Dike monitoring PY - 2008 SN - 978-3-00-025217-4 SP - 1457 EP - 1460 AN - OPUS4-18322 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rücker, Werner A1 - Auersch, Lutz ED - Schulte-Werning, B. T1 - A user-friendly prediction tool for railway induced ground vibrations: Emission - transmission - immission T2 - 9th International Workshop on Railway Noise CY - Munich, Germany DA - 2007-09-04 PY - 2008 SN - 3-540-74892-X N1 - Serientitel: Notes on numerical fluid mechanics and multidisciplinary design – Series title: Notes on numerical fluid mechanics and multidisciplinary design IS - 99 SP - 129 EP - 135 PB - Springer CY - Berlin AN - OPUS4-18326 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz ED - Schulte-Werning, B. T1 - The influence of the soil on track dynamics and ground-borne vibration T2 - 9th International Workshop on Railway Noise CY - Munich, Germany DA - 2007-09-04 PY - 2008 SN - 3-540-74892-X N1 - Serientitel: Notes on numerical fluid mechanics and multidisciplinary design – Series title: Notes on numerical fluid mechanics and multidisciplinary design IS - 99 SP - 122 EP - 128 PB - Springer CY - Berlin AN - OPUS4-18327 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Manier, Charles-Alix A1 - Spaltmann, Dirk A1 - Woydt, Mathias ED - Desplanques, Yannick ED - Gérard Degallaix, T1 - Influences sur le comportement tribologique et endommagement de couches DLC en slip-rolling (Glissement-Roulement) / Influences on the tribological behaviour and damage of slip-rolling DLC-coatings T2 - 15èmes Journées internationales francophones de tribologie (JIFT 2006) CY - Lille, France DA - 2006-05-22 KW - DLC KW - THC KW - 100C6 KW - Roulement KW - Essai KW - Tenue KW - Résistance KW - Endommagement KW - Huile paraffinique KW - PAG PY - 2008 SN - 978-2-88074-775-6 SP - 179 EP - 188 PB - Presses polytechniques et universitaires romandes AN - OPUS4-18310 LA - fra AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Cross, Carl Edward A1 - Ben-Hamu, G. A1 - Eliezer, D. A1 - Xu, Ping ED - Kainer, K. U. T1 - Corrosion-fatigue of AZ31 wrought Magnesium weldments T2 - 7th International conference on magnesium alloys and their applications CY - Dresden, Germany DA - 2006-09-06 KW - AZ31 Magnesium Alloy KW - Arc Weld KW - Corrosion Fatigue KW - Salt Water PY - 2008 SN - 978-3-527-31764-6 SP - 727 EP - 733 PB - Wiley-VCH AN - OPUS4-18313 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Joshi, Ranjit A1 - Friedrich, Jörg Florian T1 - Unterwasserplasma zur Funktionalisierung oder Beschichtung von Polymeroberflächen T2 - 16. Neues Dresdner Vakuumtechnisches Kolloquium - Beschichtung, Modifizierung und Charakterisierung von Polymeroberflächen CY - Dresden, Deutschland DA - 2008-10-16 KW - Polymer-Oberflächenfunktionalisierung PY - 2008 SN - 978-3-9812550-0-3 SP - 44 EP - 52 AN - OPUS4-18315 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ripke, O. A1 - Alber, S. A1 - Haselbauer, M. A1 - Recknagel, Christoph T1 - Improving porous asphalt by research on the clogging process T2 - 4. Eurasphalt & Eurobitume Kongress - E&E 2008 CY - Kopenhagen, Denmark DA - 2008-05-21 KW - Cleaning KW - Noise reduction KW - Permeability KW - Porous asphalt KW - Type/road noise PY - 2008 SN - 978-90-802884-5-4 SP - 969 EP - 978 AN - OPUS4-18285 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nöther, Nils A1 - Wosniok, Aleksander A1 - Krebber, Katerina A1 - Thiele, E. ED - Ecke, Wolfgang ED - Kara J. Peters, ED - Norbert G. Meyendorf, T1 - A distributed fiber optic sensor system for dike monitoring using Brillouin optical frequency domain analysis N2 - We report on the development of a complete system for spatially resolved detection of critical soil displacement in river embankments. The system uses Brillouin frequency domain analysis (BOFDA) for distributed measurement of strain in silica optical fibers. Our development consists of the measurement unit, an adequate coating for the optical fibers and a technique to integrate the coated optical fibers into geotextiles as they are commonly used in dike construction. We present several laboratory and field tests that prove the capability of the system to detect areas of soil displacement as small as 2 meters. These are the first tests of truly distributed strain measurements on optical fibers embedded into geosynthetics. T2 - Smart Sensor Phenomena, Technology, Networks, and Systems 2008 CY - San Diego, California, USA DA - 2008-03-10 KW - BOFDA KW - Brillouin sensing KW - Distributed strain measurement KW - Dike monitoring KW - Sensor-based geotextiles KW - Fiber optic sensors KW - Distributed sensors KW - Brillouin scattering PY - 2008 SN - 978-0-8194-7119-2 DO - https://doi.org/10.1117/12.775133 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 6933 SP - 69330T-1 - 69330T-9 PB - SPIE CY - Bellingham AN - OPUS4-18250 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nöther, Nils A1 - Wosniok, Aleksander A1 - Krebber, Katerina A1 - Thiele, E. ED - W. Ostachowicz, ED - J. Holnicki-Szulc, ED - C. Mota Soares, T1 - Dike monitoring using fiber sensor-based geosynthetics N2 - We report on the development of distributed fiber sensors and their integration into geosynthetics as they are commonly used in the construction of dikes and dams for flood protection. The sensing system uses Stimulated Brillouin Scattering (SBS) in silica optical fibers. Using the Brillouin frequency analysis, the system is capable of detecting changes in both strain and temperature along the optical fibers. The strain experienced by the optical fibers corresponds to the deformation of the geosynthetics in case of a critical soil displacement. To satisfy requirements of dike structures, the system will be optimized to detect soil displacement with a spatial resolution of 5 m or less over a length in the range of 10 km. These rather modest requirements leave space for optimization on resolution of the measurement values, measurement time and cost efficiency. To our knowledge, this is the first distributed fiber sensor using SBS that is especially designed for the monitoring of soil displacement in dikes which is made possible by a novel method for the integration of optical fibers into different types of geosynthetics. T2 - 3. ECCOMAS Thematic Conference on Smart Structures and Materials CY - Gdansk, Poland DA - 2007-07-09 KW - Fiber optic sensors KW - Dike monitoring KW - SBS KW - Distributed strain sensors KW - Distributed brillouin sensors KW - Geosynthetics PY - 2007 SN - 978-83-88237-03-4 IS - Paper 03 SP - 1 EP - 13 PB - Institute of Fluid-Flow Machinery CY - Gda´nsk AN - OPUS4-18253 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schoknecht, Ute ED - Venzmer, Helmuth T1 - Auswaschbarkeit von Biozidwerkstoffen aus Fassadenbeschichtungen - welche Erkenntnisse bringen Laboruntersuchungen? T2 - 8. Dahlberg-Kolloquium CY - Wismar, Deutschland DA - 2008-09-25 KW - Biozidemissionen KW - Fassadenbeschichtungen KW - Laborverfahren PY - 2008 SN - 978-3-410-16871-3 VL - 4 SP - 111 EP - 120 PB - Fraunhofer IRB Verl. AN - OPUS4-18262 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Poli, Marco T1 - Entlastungsverhalten dreiphasiger Dampfdrucksysteme T2 - 9. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Deutschland DA - 2008-11-06 KW - Anlagensicherheit KW - Umweltschutz KW - Sicherheitstechnik KW - Dampfdrucksysteme PY - 2008 SN - 978-3-89746-099-7 IS - Poster \ P 14 PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-18338 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Qiao, Linan A1 - Zencker, Uwe A1 - Wieser, Günter A1 - Völzke, Holger ED - Topping, B. H. V. ED - M. Papadrakakis, T1 - Numerical safety assessment of a transport and storage cask for radioactive materials without impact limiters by the 0.3m drop test onto an unyielding target T2 - 9th International Conference on Computational Structures Technology (CST2008) CY - Athens, Greece DA - 2008-09-02 KW - Impact KW - Simulation KW - Cask KW - Safety KW - Drop KW - Foundation KW - Unyielding KW - Target PY - 2008 SN - 978-1-905088-23-2 IS - Paper 21 SP - 1 EP - 10 PB - Civil Comp Press CY - Kippen AN - OPUS4-18340 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ewert, Uwe A1 - Beckmann, Jörg A1 - Bellon, Carsten A1 - Jaenisch, Gerd-Rüdiger A1 - Zscherpel, Uwe A1 - Jechow, Mirko A1 - Großer, A. T1 - Fehlergrößenabhängige Kontrastreduktion und zusätzliche Unschärfe durch Streustrahlung reduzierendie Bildqualität radiologischer Abbildungen - Film und digitale Detektoren im Vergleich T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung CY - St. Gallen, Schweiz DA - 2008-04-28 KW - Digitale Radiologie KW - Streuverhältnis KW - Strahlenkontrast KW - Unschärfe PY - 2008 SN - 978-3-940283-09-2 IS - DGZfP-BB 113 (Di.1.A.1) SP - 133 EP - 144 AN - OPUS4-18349 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schoßig, Jörg A1 - Schmidt, Martin A1 - Krause, Ulrich A1 - Steinbach, J. T1 - Validierung von formalkinetischen Größen aus der adiabaten Warmlagerung T2 - 9. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Deutschland DA - 2008-11-06 KW - Anlagensicherheit KW - Umweltschutz KW - Sicherheitstechnik KW - Explosionsschutz PY - 2008 SN - 978-3-89746-099-7 SP - 1 EP - 3 PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-18427 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Grunewald, Thomas A1 - Finke, Robert T1 - Untersuchungen zur statistischen Zündwahrscheinlichkeit mechanisch erzeugter Funken im explosionsgefährdeten Bereich T2 - 9. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Deutschland DA - 2008-11-06 PY - 2008 SN - 978-3-89746-099-7 SP - 1 EP - 12 PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-18361 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Adamczyk, Burkart A1 - Brenneis, Rudolf A1 - Kühn, M. A1 - Mudersbach, D. ED - Thomé-Kozmiensky, K.J. T1 - Verwertung von Edelstahlschlacken - Gewinnung von Chrom aus Schlacken als Rohstoffbasis T2 - Berliner Rohstoff- und Recyclingkonferenz - Aufbereitung und Verwertung mineralischer Stoffe und Abfälle CY - Berlin, Deutschland DA - 2008-11-05 KW - Lichtbogenofen KW - Schlacke KW - Chrom KW - Edelstahl KW - Verwertung KW - Recycling KW - Rückgewinnung KW - RECARC PY - 2008 SN - 978-3-935317-36-8 VL - 1 SP - 143 EP - 160 PB - TK-Verl. CY - Neuruppin AN - OPUS4-18363 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Drewitz, Yvonne A1 - Schalau, Bernd A1 - Acikalin, Hatice Aydan A1 - Strouhal, W. T1 - Sicherheitsabstand einer Flüssiggasbehälteranlage unter dem Blickwinkel einer quantitativen Risikoanalyse T2 - 9. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Deutschland DA - 2008-11-06 KW - Quantitative Risikoanalyse KW - Störfall-Verordnung PY - 2008 SN - 978-3-89746-099-7 IS - D 02 SP - 1 EP - 19 PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-18410 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beckmann, Jörg A1 - Großer, Anja A1 - Zscherpel, Uwe A1 - Ewert, Uwe T1 - Einfluss von Metall - Speicherfolien - Kombinationen auf die Bildqualität in der Computer - Radiographie N2 - Bei der Normgestaltung für Speicherfolien sind die Auswirkungen von Metallfolien und Metallfolienkombinationen auf die Bildqualität von Speicher-folienaufnahmen nicht ausreichend berücksichtigt worden. Es ist bekannt, dass bei Film - Metallfolien - Kombinationen zusätzlich zur Änderung der optischen Dichte und der Filmgranularität auch Änderungen der inneren Unschärfe durch den seitli-chen Energietransport in der Film – Metallfolien - Kombination entstehen, welche überwiegend durch ausgelöste Elektronen und zum Teil durch sekundäre Strahlung hervorgerufen werden. Gleichzeitig dienen die Metallfolien bei Röntgenaufnahmen mit Film als Streustrahlfilter und können zur Verbesserung des Bildkontrastes bei-tragen. Die Mechanismen zur Erzeugung des virtuellen Röntgenbildes und dessen Visualisierung sind in Speicherfolien nicht mit denen in einem Röntgenfilm iden-tisch. Demzufolge können die in den Normen festgelegten Vorschriften zum Einsatz von Metallfolien in der Filmradiographie nicht auf Speicherfolien uneingeschränkt übertragen werden. Anhand der hier erzielten Ergebnisse lassen sich Empfehlungen zum zukünftigen Einsatz der Metallfilter und -folienkombinationen für die Speicher-folientechnik zur Verbesserung der Bildgüte ableiten. T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung CY - St. Gallen, Schweiz DA - 2008-04-28 PY - 2008 SN - 978-3-940283-09-2 IS - DGZfP-BB 113 (Poster 29) SP - 1 EP - 8 AN - OPUS4-18413 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Drame, Christian A1 - Stolpe, F. A1 - Förster, H. A1 - Schönbucher, A. T1 - Explosionsverhalten von Brennstoff/Luft-Gemischen in geschlossenen Rohrleitungen KW - Deflagration KW - Geschlossene Rohrleitung KW - Wandrauhigkeit KW - Rohrlänge KW - Brennstoffe PY - 2008 SN - 978-3-89746-099-7 SP - 1 EP - 11 PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-18414 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Liebner, Christian A1 - Hieronymus, Hartmut A1 - Fischer, J. A1 - Klemm, E. T1 - Mikrostrukturierte Reaktoren im Explosionsbereich - Untersuchungsmethoden zu Fragen der (nicht vorhandenen) inhärenten Sicherheit T2 - 9. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Deutschland DA - 2008-11-06 KW - Mikroverfahrenstechnik KW - Mikroreaktor KW - Explosionsbereich KW - Ethylen KW - Explosionsausbreitung PY - 2008 SN - 978-3-89746-099-7 SP - 1 EP - 4 PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-18373 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beckmann, Jörg A1 - Großer, Anja A1 - Zscherpel, Uwe A1 - Ewert, Uwe T1 - Einfluss von Metall-Speicherfolien-Kombinationen auf die Bildqualität in der Computer-Radiographie T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung CY - St. Gallen, Schweiz DA - 2008-04-28 KW - Speicherfolien KW - Durchstrahlungsprüfung KW - Computer Radiographie KW - Metallfolien PY - 2008 SN - 978-3-940283-09-2 IS - DGZfP-BB 113 (Poster 29) SP - 847 EP - 856 AN - OPUS4-18351 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Arndt, Ralf T1 - Einfluss von Oberflächen- und Volumeneigenschaften auf die Zerstörungsfreie Prüfung von Beton und Mauerwerk mit aktiver Thermografie T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung CY - St. Gallen, Schweiz DA - 2008-04-28 KW - Aktive Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Beton KW - Mauerwerk KW - Hohlstellen KW - Kiesnester KW - Oberflächeneigenschaften KW - Feuchte PY - 2008 SN - 978-3-940283-09-2 IS - DGZfP-BB 113 (Mi.4.A.3) SP - 1 EP - 8 AN - OPUS4-18358 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schönbucher, A. A1 - Gawlowski, M. A1 - Hailwood, M. A1 - Schalau, Bernd A1 - Vela, I. T1 - Bisherige Analyse des Buncefield-Ereignisses - Sind neue Konsequenzmodelle erforderlich? T2 - 9. Fachtagung - Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2008-11-06 KW - Störfallsimulationen KW - Störfall-Verordnung PY - 2008 SN - 978-3-89746-099-7 SP - 1 EP - 54 PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-19265 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Erhard, Anton A1 - Wüstenberg, Hermann A1 - Engl, G. A1 - Kutzner, Jürgen ED - Charyulu, V. T1 - Reliability and redundancy in ultrasonic flaw-sizing methods N2 - The authors discuss the need for utilizing several techniques in orderto determine reliably flaw size. they suggest focusing probes, acousticholography, and possibly other techniques in the future. manipulating systemsmust be able to carry out scannings with different parameters, for instance atandem technique with different probe distances. T2 - Third International Conference on Nondestructive Evaluation in the Nuclear Industry CY - Salt Lake City, UT, USA DA - 1980-02-11 PY - 1980 SN - 0-87170-109-X SN - 0147-734X N1 - Serientitel: Materials/metalworking technology series – Series title: Materials/metalworking technology series SP - 255 EP - 268 PB - American Society for Metals CY - Metals Park, Ohio AN - OPUS4-19283 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bremser, Wolfram A1 - Hässelbarth, Werner ED - Franco Pavese, ED - Forbes, Alistair B. T1 - Approaches to data assessment and uncertainty estimation in testing N2 - The following chapter presents a selection of feasible approaches to data assessment and uncertainty evaluation for single measurands (univariate case), multiple measurands with and without a functional relationship (multivariate case), and some aspects of semi-qualitative and qualitative testing. KW - Uncertainty KW - Testing KW - Data assessment KW - Data fusion PY - 2009 SN - 978-0-8176-4592-2 DO - https://doi.org/10.1007/978-0-8176-4804-6_10 SP - 299 EP - 328 PB - Birkhäuser CY - Boston, USA AN - OPUS4-19338 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - von Oertzen, Alexander T1 - Simulating fireworks chain-reactions with cellular automata T2 - 11th International symposium on fireworks CY - Puerto Vallarta, México DA - 2009-04-20 KW - Simulation KW - Explosionswirkung KW - Feuerwerk KW - CHAF PY - 2009 SN - 978-0-9734123-8-3 SP - 1 EP - 17(?) AN - OPUS4-19394 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schurig, Michael A1 - Klinger, Christian ED - Karl-Friedrich Ziegahn, T1 - Der Repetitve Shock Test für Intermediate Bulk Container (IBC) T2 - 38. Jahrestagung der GUS 2009 - Umwelteinflüsse erfassen, simulieren, bewerten CY - Karlsruhe DA - 2009-03-18 KW - Schwingungsprüfung KW - IBC PY - 2009 SN - 978-3-9810472-7-1 IS - V 19 SP - 137 EP - 144 PB - DWS Werbeagentur und Verlag GmbH CY - Karlsruhe AN - OPUS4-19395 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Naghib Zadeh, Hamid A1 - Glitzky, Carsten A1 - Rabe, Torsten T1 - Low fired high-K dielectrics buried into LTCC substrates N2 - Due to addition of minor amounts of suitable additive combinations to BaTiO3 powder the sintering temperature was reduced to 900 °C. Excellent densification (more than 98% of theoretical density) and good dielectric properties were achieved after sintering at 900 °C for 2 hours. Dielectric properties can be improved by modifying the composition of sintering additives and additon of further dopants. The low sintering temperature of newly developed capacitor material allows a co-sintering with pure silver electrodes. No interfacial reaction between silver electrodes and ceramics was observed by microprobe analysis. The dielectric constants of about 1200 to 3000 and the dielectric losses of about 0.008 to 0.02 were measured (f = 1 kHz, T = 25 °C). The temperature dependency of dielectric constant for new capacitor materials is low, almost X7R characteristics. Furthermore, the densification and the dielectric properties of embedded capacitors in LTCC were investigated. T2 - 5th Ceramic Interconnect and Ceramic Microsystems Technologies Conference CY - Denver, USA DA - 2009-04-20 KW - Capacitor KW - LTCC KW - Barium titanate PY - 2009 SN - 0-930815-87-4 IS - WA 32 SP - 000188 EP - 000192 AN - OPUS4-19377 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Burkert, Andreas A1 - Fischer, Joachim A1 - Zietelmann, Christina A1 - Lehmann, Jens T1 - Erhaltung des Korrosionsschutzes - Wieviel Pflege braucht der Stahl? T2 - 3. Länder-Korrosionstagung CY - Basel, Schweiz DA - 2009-04-20 KW - Nichtrostender Stahl KW - Korrosion KW - Korrosionsschutz KW - Pflege KW - Reinigung PY - 2009 SN - 978-3-935406-38-3 SP - 47 EP - 58 PB - DECHEMA CY - Frankfurt/M. AN - OPUS4-19381 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dutschke, Andreas A1 - Lohrer, Christian A1 - Seeger, Stefan A1 - Kurth, Lutz T1 - Towards the reaction products of indoor fireworks T2 - 11th International symposium on fireworks CY - Puerto Vallarta, México DA - 2009-04-20 KW - Reaction products KW - Particles KW - Smoke gases KW - FTIR PY - 2009 SN - 978-0-9734123-8-3 SP - 66 EP - 79 AN - OPUS4-19384 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weber, Gert A1 - Rethmeier, Michael A1 - Göklü, S. ED - P. Mayr, ED - G. Posch, ED - H. Cerjak, T1 - Influence of the type of electrode caps on the welding current ranges and the process reliability in resistance spot welding T2 - 61st Annual Assembly and International Conference of the International Institute of Welding (IIW) "Safety and Reliability of Welded Components in Energy and Processing Industry" CY - Graz, Austria DA - 2008-07-06 PY - 2008 SN - 978-3-85125-019-0 IS - IIW Doc. No. III-1484-08 SP - 1 EP - 16(?) PB - Verlag der Technischen Universität Graz CY - Graz, Austria AN - OPUS4-19386 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thoen, J. A1 - Zweifel, D. A1 - Woydt, Mathias ED - Michael Berg, T1 - Potential for polyalkylene glycols in automotive engine oil applications KW - Polyalkylene glycol KW - Engine oil ash-free KW - Polymer-free KW - Friction KW - Wear KW - Oxidation stability KW - Testing PY - 2009 SN - 978-3-8169-2907-9 VL - 103 SP - 92 EP - 105 PB - Expert Verlag AN - OPUS4-19391 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Buchholz, Uwe A1 - Petersson, B.A.T. ED - Marinus M. Boone, T1 - Investigation of the sound transmission of a partial discharge through a solid dielectric multilayered device N2 - Acoustic emission (AE) sources caused by partial discharges in solid dielectric devices like transition joints or outdoor terminations are investigated. Together with a prepared high voltage cable end this device forms a multilayer structure. The hypothesis is that due to the high damping of polymeric insulation materials no AE signal can be detected on the surface of the prescribed structures. An analytical technique is used to determine the transmission for a typical multilayer insulation. For quantitative computations it is necessary to know the material properties such as complex Young´s modulus, density and the Poisson´s ratio. Since the properties found in the literature were not fully satisfactory, measurements had to be done. The experimental setup and the results are shortly presented. Finally it will be shown that the transmission path plays not the significant role as was assumed in the beginning. T2 - International Conference on Acoustics - NAG/DAGA 2009 CY - Rotterdam, The Netherlands DA - 2009-03-23 PY - 2009 SN - 978-3-9808659-6-8 SP - 844 EP - 846 AN - OPUS4-19519 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Österle, Werner A1 - Bresch, Harald A1 - Dörfel, Ilona A1 - Prietzel, Claudia A1 - Seeger, Stefan A1 - Fink, C. A1 - Giese, A. A1 - Walter, J. T1 - Surface film formation and dust generation during brake performance tests T2 - Braking 2009 CY - York, UK DA - 2009-06-09 KW - Bremse KW - Dritter Körper KW - Verschleiß KW - Reibung KW - Nanocharakterisierung KW - Aerosol PY - 2009 SN - 978-1-84334-559-6 IS - C672/028/09 SP - 29 EP - 38 PB - Woodhead Publishing Ltd AN - OPUS4-19574 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hübert, Thomas A1 - Banach, Ulrich ED - Matteo Pardo, ED - Giorgio Sberveglieri, T1 - Technical standard for multigassensors T2 - 13th International symposium on olfaction and electronic nose CY - Brescia, Italy DA - 2009-04-15 KW - Electronic nose KW - Ion mobility spectrometer KW - Spice mixtures KW - Product adulteration KW - Multivariate data analysis KW - Multigassensor KW - Standardisation KW - Codes and Standards PY - 2009 SN - 978-0-7354-0674-2 N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings VL - 1137 SP - 515 EP - 516 AN - OPUS4-19571 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz T1 - Building response at foundation, walls, columns and floors due to ground vibration - simplified calculation based on experience with detailed models and measurements T2 - 16th International Congress on Sound and Vibration - ICSV16 CY - Kraków, Poland DA - 2009-07-05 PY - 2009 SN - 978-83-60716-71-7 SP - 1 EP - 8(?) AN - OPUS4-20474 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hoever, Carsten A1 - Kropp, W. A1 - Petersson, B.A.T. T1 - Active structural control of impacts with a view towards noise control T2 - NAG/DAGA 2009 - International Conference on Acoustics CY - Rotterdam, The Netherlands DA - 2009-03-23 KW - Acoustics KW - Noise control KW - Impacts KW - Active control PY - 2009 SN - 978-3-9808659-6-8 IS - Active noise control 2 SP - 1216 EP - 1219 AN - OPUS4-20466 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nöther, Nils A1 - Wosniok, Aleksander A1 - Krebber, Katerina A1 - Thiele, E. ED - Bernadette Havranek, ED - Masoud Motavalli, ED - Urs Meier, T1 - A distributed fiber-optic sensing system for monitoring of large geotechnical structures T2 - 4th International conference on structural health monitoring of intelligent infrastructure CY - Zurich, Switzerland DA - 2009-07-22 KW - Structural health monitoring KW - Distributed sensing KW - Geotextiles KW - Dike monitoring PY - 2009 SN - 978-3-905594-52-2 SP - 1 EP - 9 CY - Zurich, Switzerland AN - OPUS4-20468 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ludwig, Jörg T1 - Interaction homme/systèmes techniques - Remèdes techniques à l'erreur humaine PY - 1998 SN - 2-85701-302-7 SN - 1142-6829 N1 - Serientitel: IGC Document – Series title: IGC Document IS - 58/98/F SP - 10/1 EP - 10/14 PB - European Industrial Gases Association (EIGA) CY - Bruxelles AN - OPUS4-20469 LA - fra AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ludwig, Jörg T1 - The interaction between persons and technical systems - error-tolerant systems PY - 1998 SN - 2-85701-303-5 SN - 1142-6829 N1 - Serientitel: IGC Document – Series title: IGC Document IS - 58/98/E SP - 10/1 EP - 10/14 PB - European Industrial Gases Association (EIGA) CY - Bruxelles AN - OPUS4-20470 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ludwig, Jörg T1 - Werkstoffkennwerte und Versagensgrenzen von Tanks PY - 1991 SN - 3-18-090852-1 SN - 0083-5560 SP - 697 EP - 712 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-20439 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ludwig, Jörg T1 - Wechselwirkung zwischen Mensch und technischen Systemen - Fehlertolerante Systeme PY - 1998 SN - 2-85701-304-3 SN - 1142-6829 N1 - Serientitel: IGC Document – Series title: IGC Document IS - 58/98/D SP - 10/1 EP - 10/14 PB - European Industrial Gases Association (EIGA) CY - Bruxelles AN - OPUS4-20450 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ludwig, Jörg A1 - Ulrich, Armin T1 - Maximum allowable tension for austenitic steels regarding the construction of portable tanks PY - 1992 SN - 3-18-090940-4 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 940 SP - 469 EP - 476 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-20451 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ludwig, Jörg A1 - Ulrich, Armin T1 - Das stofforientierte Risiko beim Tanktransport gefährlicher Güter T2 - 14. Internationales Kolloquium für die Verhütung von Arbeitsunfällen und Berufskrankheiten in der chemischen Industrie CY - Frankfurt am Main, Deutschland DA - 1991-06-10 PY - 1991 SN - 92-843-0052-5 SN - 1015-8022 SP - 27 EP - 34 PB - Internationale Sektion für die Verhütung von Arbeitsunfällen und Berufskrankheiten in der Chemischen Industrie CY - Heidelberg AN - OPUS4-20452 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Babu, N. K. A1 - Cross, Carl Edward ED - Kainer, K.U. T1 - Influence of variable polarity pulsed current technique on grain refinement of AZ31 weldments T2 - Magnesium - 8th International conference on magnesium alloys and their applications CY - Weimar, Germany DA - 2009-10-26 KW - Variable polarity KW - Puulsed current welding KW - Magnesium KW - Grain refinement PY - 2009 SN - 978-3-527-32732-4 SP - 996 EP - 1003 PB - Wiley-VCH AN - OPUS4-20587 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Xu, Ping A1 - Winzer, N. A1 - Bender, S. A1 - Cross, C.E. ED - Kainer, K.U. T1 - Investigation of corrosion-fatigue behavior of AZ31 wrought magnesium weldments T2 - Magnesium - 8th International conference on magnesium alloys and their applications CY - Weimar, Germany DA - 2009-10-26 KW - Corrosion-fatigue KW - Magnesium KW - Welds PY - 2009 SN - 978-3-527-32732-4 SP - 858 EP - 865 PB - Wiley-VCH AN - OPUS4-20589 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bertovic, Marija A1 - Gaal, Mate A1 - Müller, Christina A1 - Fahlbruch, B. T1 - Investigating human factors in manual ultrasonic testing: Testing the human factor model N2 - The human factors approach relies on understanding the properties of human capability and limitations under various conditions and the application of that knowledge in designing and developing safe systems. Following the principles of MTO (Man Technology Organization) approach, emphasis should be given to the way people interact with technical as well as organizational systems. A model describing human factor influences in relation to the performance shaping factors and their effect on the manual ultrasonic inspection performance had been built and a part of it empirically tested. The experimental task involved repeated inspection of 18 flaws according to the standard procedure under no, middle and high time pressure. Stress coping strategies, mental workload of the task, stress reaction and organizational factors have been measured. The results have shown that time pressure, mental workload and experience influence the quality of the inspection performance. Organizational factors and their influence on the inspection results were rated as important by the operators. However, further research is necessary into the effects of stress. T2 - 4th European-American workshop on reliability of NDE CY - Berlin, Germany DA - 2009-06-24 KW - Human factors KW - Time pressure KW - Nuclear power plants KW - Ultrasonic testing PY - 2009 UR - http://www.ndt.net/article/reliability2009/Inhalt/th4a3.pdf SN - 978-3-940283-17-7 IS - DGZfP-BB 116 SP - 1 EP - 8 AN - OPUS4-20615 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Christina A1 - Bertovic, Marija A1 - Gaal, Mate A1 - Heidt, Heinrich A1 - Pavlovic, Mato A1 - Rosenthal, Martina A1 - Takahashi, K. A1 - Pitkänen, J. A1 - Ronneteg, U. T1 - Progress in evaluating the reliability of NDE systems - Paradigm shift N2 - The paper will give an overview of new methodology for evaluating the reliability of NDE systems accurately, reliably and efficiently in accordance with the specific requirements of industrial application. After a review of the substantive issues from the previous workshops, the go forward guidance from these interactions is considered. At the beginning of the reliability analysis, the actual safety demands have to be defined in order to fit the investigation to the level of risk when the component would fail. Next, all the essential influencing parameters need to be documented and transferred to an appropriate design of experiments (DOE) to determine the reliability in terms of a qualitative assessment for lower risk or in terms of a quantitative probability of detection (POD) or ROC (Receiver Operating Characteristics) curves for higher safety demands. A new paradigm is offered to consider the POD or reliability of the system as a function of the configuration of input variables and use it for optimisation rather than for a final judgement. An advantage for the end user is also to sample all single PODs to an integral 'Volume POD' of a part. Among the influencing parameters, the human factor is the most important one. A systematic psychological approach shall help to find out where the bottlenecks are but most importantly to provide best possible working conditions for the human inspectors. T2 - 4th European-American workshop on reliability of NDE CY - Berlin, Germany DA - 2009-06-24 KW - Zuverlässigkeit von ZfP-Systemen KW - Multiparameter POD PY - 2009 UR - http://www.ndt.net/article/reliability2009/Inhalt/we1a2.pdf SN - 978-3-940283-17-7 IS - DGZfP-BB 116 SP - 1 EP - 13 AN - OPUS4-20616 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Takahashi, K. A1 - Pavlovic, Mato A1 - Ronneteg, U. A1 - Pitkänen, J. A1 - Müller, Christina T1 - Probability of detection from C-scan data for reliability analysis of ultrasonic non-destructive testing T2 - 4th European-American workshop on reliability of NDE CY - Berlin, Germany DA - 2009-06-24 KW - POD KW - UT KW - Reliability KW - C-scan PY - 2009 SN - 978-3-940283-17-7 IS - DGZfP-BB 116 SP - 1 EP - 7 AN - OPUS4-20617 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pavlovic, Mato A1 - Takahashi, K. A1 - Ronneteg, U. A1 - Pitkänen, J. A1 - Müller, Christina T1 - Multi-parameter influence on the response of the flaw to the phased array ultrasonic NDT system. The volume POD. T2 - 4th European-American workshop on reliability of NDE CY - Berlin, Germany DA - 2009-06-24 KW - POD KW - Reliability KW - Multi-parameter signal response PY - 2009 SN - 978-3-940283-17-7 IS - DGZfP-BB 116 SP - 1 EP - 6 AN - OPUS4-20618 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Lehmann, Christian A1 - Fontana, Patrick A1 - Meng, Birgit T1 - Effects of autoclaving on the nano structure and phase composition of ultra high performance concrete T2 - 12th Euroseminar on microscopy applied to building materials CY - Dortmund, Germany DA - 2009-09-15 KW - UHPC KW - Micro structure KW - Autoclaving KW - Phase stability KW - C-S-H PY - 2009 SN - 978-3-00-028697-1 SP - 351 EP - 359 AN - OPUS4-20622 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Meyer-Plath, Asmus A1 - Mix, Renate A1 - Schulze, Rolf-Dieter A1 - Joshi, Ranjit ED - Tachibana, K. ED - Takai, O. T1 - New plasmas for polymer surface functionalization T2 - Proceedings of the 18th International Symposium on Plasma Chemistry (ISPC-18) CY - Kyoto, Japan DA - 2007-08-26 PY - 2007 SN - 978-4-9903773-4-2 SP - 29A/a8, 1 EP - 4 PB - International Union of Pure and Applied Chemistry CY - Kyoto AN - OPUS4-20666 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mix, Renate A1 - Joshi, Ranjit A1 - Schulze, Rolf-Dieter A1 - Meyer-Plath, Asmus A1 - Friedrich, Jörg Florian ED - Tachibana, K. ED - Takai, O. T1 - Aerosol and underwater plasma for polymer surface functionalization T2 - Proceedings of the 18th International Symposium on Plasma Chemistry (ISPC-18) CY - Kyoto, Japan DA - 2007-08-26 PY - 2007 SN - 978-4-9903773-4-2 SP - 27P/80, 1 EP - 4 PB - International Union of Pure and Applied Chemistry CY - Kyoto AN - OPUS4-20667 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Gehlen, C. T1 - Validation of NDT methods in civil-engineering using reliability theory T2 - 4th European-American workshop on reliability of NDE CY - Berlin, Germany DA - 2009-06-24 KW - Validation KW - Non-destructive testing KW - Uncertainty KW - Reliability KW - Pile length measurement KW - GUM KW - Low-strain method PY - 2009 SN - 978-3-940283-17-7 IS - DGZfP-BB 116 (Th.1.A.3) SP - 1 EP - 6 AN - OPUS4-20653 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schlichting, Joachim A1 - Kervalishvili, Guram N. A1 - Maierhofer, Christiane A1 - Kreutzbruck, Marc T1 - Defect sizing by local excitation thermography T2 - 15th International conference "Building services, mechanical and building industry days" CY - Debrecen, Hungary DA - 2009-10-15 KW - Thermography KW - Laser excitation KW - FEM Modeling KW - Crack sizing PY - 2009 SN - 978-963-473-315-7 SP - 67 EP - 76 AN - OPUS4-20655 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bollmann, K. A1 - Lyhs, P. A1 - Molkenthin, A. A1 - Wilsch, Gerd A1 - Goldschmidt, Sebastian ED - Stark, J. T1 - Untersuchung von Betonflächen mittels Laser Induced Breakdown Spectroscopy (LIBS) zur Klärung möglicher Prüfartefakte bei der Prüfung des Frost-Tausalz-Widerstandes T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 KW - Beton KW - Dauerhaftigkeit KW - Abwitterung KW - CDF-Test KW - LIBS KW - Alkalien PY - 2009 SN - 978-3-00-027265-3 IS - Paper 2.101 SP - 1 EP - 6 CY - Weimar AN - OPUS4-20649 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molkenthin, A. A1 - Wilsch, Gerd ED - Stark, J. T1 - Untersuchung der Verteilung von Anionen und Kationen in mineralischen Baustoffen mittels Laser Induced Breakdown Spectroscopy (LIBS) T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 KW - Chloride KW - Alkalien KW - Verteilung KW - LIBS PY - 2009 SN - 978-3-00-027265-3 IS - Paper 2.74 SP - 1 EP - 6 CY - Weimar AN - OPUS4-20650 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Mayer, K. A1 - Friese, Martin A1 - Milmann, Boris A1 - Mielentz, Frank A1 - Ballier, G. ED - Odile Abraham, ED - Dérobert, Xavier T1 - Progress in ultrasonic tendon duct imaging T2 - NDTCE `09 - 7th international symposium on non destructive testing in civil engineering CY - Nantes, France DA - 2009-06-30 KW - Reconstruction calculation KW - SAFT KW - EFIT Modelling KW - Prestressed concrete structures PY - 2009 SN - 978-2-7208-2542-5 SN - 1628-4704 IS - Paper 77 SP - 147 EP - 154 AN - OPUS4-20652 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bender, S. A1 - Göllner, J. A1 - Heyn, Andreas A1 - Heilmaier, M. A1 - Schmidt, J. ED - Kainer, K.U. T1 - Basic examinations of pre-treatment and coating of magnesium alloys T2 - 8th International conference on magnesium alloys and their applications CY - Weimar, Germany DA - 2009-10-26 KW - Magnesium KW - Korrosion KW - Beschichtung KW - Vorbehandlung KW - Elektrochemisches Rauschen PY - 2010 SN - 978-3-527-32732-4 SP - 1323 EP - 1330 PB - Wiley-VCH AN - OPUS4-20743 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Osterloh, Kurt A1 - Zscherpel, Uwe A1 - Ewert, Uwe T1 - Threat detection and imaging T2 - 2nd Security research conference Karlsruhe CY - Karlsruhe, Germany DA - 2007-09-12 KW - Digitale Bildbearbeitung KW - Automatische Rauscherkennung und Kompensation PY - 2007 SN - 978-3-86644-147-7 SP - 179 EP - 182 PB - Universitätsverlag Karlsruhe AN - OPUS4-20715 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter A1 - Schönbucher, A. ED - Witt, P. J. ED - Schwarz, M.P. T1 - Prediction of burning rate of an accidentally released flammable fuel by means of CFD simulation T2 - 7th International Conference on CFD in the minerals and process industries CY - Melbourne, Australia DA - 2009-12-09 KW - Mass burning rate KW - CFD simulation KW - TBPB KW - TBPEH KW - Turbulent fire KW - Fuel Froude number PY - 2009 SN - 978-0-643-09825-1 SP - 1 EP - 7 AN - OPUS4-20768 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Osterloh, Kurt A1 - Wrobel, Norma A1 - Fratzscher, Daniel A1 - Jechow, Mirko A1 - Zscherpel, Uwe A1 - Ewert, Uwe A1 - Hasenstab, A. T1 - Backscatter radiation - using X-rays for illumination T2 - MATEST 2009 CY - Cavtat/Dubrovnik, Croatia DA - 2009-09-23 KW - X-ray back scatter KW - Unilateral access KW - Twisted slit collimator KW - Pinhole camera principle with high energy radiation PY - 2009 SN - 978-953-7283-03-2 IS - #12 SP - 1 EP - 11 AN - OPUS4-20709 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Osterloh, Kurt A1 - Wrobel, Norma A1 - Kunte, Hans-Jörg A1 - Zscherpel, Uwe A1 - Ewert, Uwe T1 - Making the world a safer place - some know-how already exists T2 - MATEST 2009 CY - Cavtat/Dubrovnik, Croatia DA - 2009-09-23 KW - Existing hazards KW - Threat detection KW - Interdisciplinary approach KW - Existing safety rules and procedures KW - Bridging safety and security KW - Common definitions PY - 2009 SN - 978-953-7283-03-2 IS - #10 SP - 1 EP - 7 AN - OPUS4-20710 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Acikalin, Hatice Aydan T1 - Consideration of the effectiveness of the safety management system in QRA calculations T2 - Hazards XXI - Process safety and environmental protection CY - Manchester, UK DA - 2009-11-10 KW - Integrated risk assessment KW - QRA KW - Safety management system KW - Effectiveness score KW - Management factor PY - 2009 SN - 978-0-85295-536-9 VL - 155 SP - 603 EP - 609 AN - OPUS4-20701 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lehmann, Christian A1 - Fontana, Patrick A1 - Müller, Urs ED - Bittnar, Z. ED - Bartos, P. J. M. ED - Nemecek, J. ED - Smilauer, V. ED - Zeman, J. T1 - Evolution of phases and micro structure in hydrothermally cured ultra-high performance concrete (UHPC) T2 - 3rd International symposium on nanotechnology in construction (NICOM 3) CY - Prague, Czech Republic DA - 2009-05-31 KW - Ultra high performance concrete KW - UHPC KW - Phase evolution KW - Micro structure KW - Hydrothermal curing PY - 2009 SN - 978-3-642-00979-2 SP - 287 EP - 293 PB - Springer AN - OPUS4-20702 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Suhendra, Suhendra A1 - Schmidt, Martin A1 - Krause, Ulrich T1 - Underground coal fire extinction model using coupled reactive heat and mass transfer model in porous media T2 - COMSOL Conference 2009 CY - Milan, Italy DA - 2009-10-14 KW - Reactive heat - mass transfer KW - Underground coal fire KW - Porous media PY - 2009 SN - 978-0-9825697-0-2 SP - 1 EP - 6 AN - OPUS4-20833 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz A1 - Said, Samir ED - Xia, H. ED - Takemiya, H. T1 - Environmental vibrations due to different technical sources, amplitude-distance laws in experiment and theory T2 - 4th International Symposium on Environmental Vibration: Prediction, Monitoring and Evaluation (ISEV2009) CY - Beijing, China DA - 2009-10-28 KW - Amplitude-distance laws KW - Environmental vibrations KW - Field tests KW - Wave theory of attenuation PY - 2009 SN - 978-7-03-025765-9 VL - I SP - 757 EP - 762 PB - Science Press CY - Beijing, China AN - OPUS4-20788 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiggenhauser, Herbert ED - Odile Abraham, ED - Dérobert, Xavier T1 - Advanced NDT methods for quality assurance of concrete structures T2 - NDTCE `09 - 7th international symposium on non destructive testing in civil engineering CY - Nantes, France DA - 2009-06-30 KW - Ultrasound KW - Radar KW - Impact-echo KW - Validation KW - Automation PY - 2009 SN - 978-2-7208-2542-5 SN - 1628-4704 IS - Paper 77 SP - 1 EP - 12 AN - OPUS4-20789 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Scholz, Christian A1 - Manier, Charles-Alix A1 - Woydt, Mathias ED - de Wilde, W.P. ED - Brebbia, C.A. ED - Mander, U. T1 - Slip-rolling resistance of high performance thin films and high toughness steel substrates under extreme conditions N2 - Nowadays, diamond-like carbon (DLC) coatings are mainly used in many low loaded applications such as in machine tools, computer devices and many more. Especially the automotive industry anticipates a benefit in applying such coatings in association with the lightweight construction of mechanical parts, for instance in gear components. The ulterior motive is a global performance increase regarding environmental impact and power efficiency. In recent years, the slip-rolling resistance of DLC, a-C and ta-C thin film coatings was improved considerably. In view of the mechanical application of thin film coatings, there is still room for improvements. It was experimentally shown, that a-C and ta-C coatings can be slip-rolling resistant at room temperature in unaddivated paraffin oil up to ten million cycles under Hertzian contact pressures up to P0max = 2.9 GPa. Typically, the prime coated steel substrates were made of the hardened and tempered steels 100Cr6H and Cronidur 30. The aim of the work this to overtake these results, i.e. at higher maximum Hertzian pressures up to P0max = 4.2 GPa. Under such extreme conditions, it is necessary to choose special steels to avoid the failure of the substrate and to permit a higher load carrying capacity of the coating-substrate-system. In consideration of the increased substrate properties, two high toughness spring steels and an ultra-high toughness aerospace steel were tested on a twin disc tribometer of the Amsler type as well as on an Optimol TwinDisc test rig under mixed/boundary conditions. Different factors such as residual stresses of the substrate, influences of the lubrication, and wear behaviour were investigated. The respective results are presented here. KW - Slip-rolling KW - High toughness steel KW - DLC KW - a-C KW - Thin film coating PY - 2010 SN - 978-1-84564-464-2 DO - https://doi.org/10.2495/HPSM100481 SN - 1746-4498 SN - 1743-3509 VL - 112 SP - 521 EP - 532 PB - WIT Press CY - Ashurst, Southampton, UK AN - OPUS4-21868 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Poli, Marco A1 - Grätz, Rainer A1 - Schröder, Volkmar T1 - Influence of obstacles and initial pressure on turbulent gas explosion venting T2 - 19th International congress of chemical and process engineering (CHISA 2010) / 7th European congress of chemical engineering (ECCE-7) CY - Prague, Czech Republic DA - 2010-08-28 KW - Explosionsdruckentlastung KW - Turbulente Verbrennung KW - Explosionsschutz PY - 2010 SN - 978-80-02-02210-7 IS - F2.5 / 0911 SP - 1 EP - 7 CY - Prague, Czech Republic AN - OPUS4-21922 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Ziegert, Christof A1 - Röhlen, U. A1 - Schroeder, H. T1 - Standardization of a sustainable and eco-efficient building material: Earth - a german perspective T2 - CESB '10 - Central Europe Towards Sustainable Building CY - Prague, Czech Republic DA - 2010-06-30 KW - Earthen materials KW - Standardization KW - Sustainability KW - Quality control KW - Normierung KW - Lehmbaustoffe KW - Prüfverfahren KW - Qualitätskontrolle KW - Nachhaltigkeit KW - Stoffkreislauf PY - 2010 SN - 978-80-247-3624-2 SP - 711 EP - 714 PB - Czech Technical University CY - Prague AN - OPUS4-21980 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krankenhagen, Rainer A1 - Kervalishvili, Guram N. A1 - Maierhofer, Christiane T1 - Influence of air-gaps on the thermal behaviour of the plaster-concrete bonds N2 - The delamination of a plaster layer, which covers a concrete structure, can be detected by active thermography. In this paper, a systematic series of measurements is described, where the gap between plaster and concrete was varied. These investigations were compared to FEM-simulations. The experimental and simulated data were in good agreement. It was found that the used experimental setup yields only marginal differences between fixed and lose plaster in the thermal behavior. However, significant characteristics within the temperature decays could be resolved, which are clearly related to the air gap. T2 - QIRT 10 - 10th International conference on Quantitative InfraRed Thermography CY - Québec, Canada DA - 2010-07-27 KW - Active thermography KW - Plaster KW - Concrete KW - Temperature decay PY - 2010 UR - http://qirt.gel.ulaval.ca/archives/qirt2010/papers/QIRT%202010-067.pdf SN - 978-2-9809199-1-6 IS - QIRT 2010-067 SP - 1 EP - 5(?) AN - OPUS4-21956 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schlichting, Joachim A1 - Maierhofer, Christiane A1 - Kreutzbruck, Marc T1 - Defect sizing by local excitation thermography N2 - In this article, we present a measurement procedure to gain information about depth and angle of open surface cracks. The method is based on a local excitation with, e.g., a laser. The resulting surface temperature is recorded with an infrared camera. Based on this data, crack-caused anisotropies in the lateral heat flow can be detected and exploited to characterise the cracks. The experimental set-up is based on a Nd:YAG laser. The beam is focused on the test sample by using an optical scanner to generate the required lateral heat flow. The time resolved temperature distribution is recorded with a high-speed infrared camera (InSb FPA, 3 to 5 µm) providing a frame rate of up to 500 Hz. Up to now, only qualitative information was gained from measurements of this type. Whereas the local transient behaviour of temperature distribution provides also quantitative information of the crack parameters. The general concept of the method presented herein has already been published [1], but the mentioned publication is focused on the crack depth only. In this paper, we can show that it is possible to simultaneously resolve the angle and depth and, in particular, the depth of non-perpendicular cracks. T2 - QIRT 10 - 10th International conference on Quantitative InfraRed Thermography CY - Québec, Canada DA - 2010-07-27 KW - FEM KW - Risse KW - Thermografie PY - 2010 UR - http://qirt.gel.ulaval.ca/archives/qirt2010/papers/QIRT%202010-121.pdf SN - 978-2-9809199-1-6 IS - QIRT 2010-121 SP - 773 EP - 780 AN - OPUS4-21957 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfister, Sabine A1 - Vela-Wallenschus, Iris A1 - Knaust, Christian A1 - Krause, Ulrich T1 - Untersuchung von Brandszenarien in Industrieanlagen mit numerischer Strömungssimulation T2 - 12. Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Deutschland DA - 2010-06-15 KW - Industriebrände KW - CFD Simulation KW - Brandsimulation PY - 2010 SN - 978-3-9813550-1-7 SN - 0938-5533 N1 - Geburtsname von Vela-Wallenschus, Iris: Vela, I. - Birth name of Vela-Wallenschus, Iris: Vela, I. SP - 55 EP - 59 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-21972 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ehrig, Karsten A1 - Staude, Andreas A1 - Goebbels, Jürgen A1 - Bartscher, M. A1 - Koch, M. A1 - Neukamm, M. ED - Kastner, J. T1 - Evaluierung von Testkörpern zur Strahlaufhärtungskorrektur beim dimensionellen Messen mit Computertomographie T2 - Industrielle Computertomografie Tagung CY - Wels, Österreich DA - 2010-09-27 KW - Testkörper KW - Strahlaufhärtung KW - CT KW - Dimensionelles Messen PY - 2010 SN - 978-3-8322-9418-2 SN - 1610-4773 SP - 181 EP - 186 PB - Shaker Verlag GmbH AN - OPUS4-22033 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mietz, Jürgen A1 - Burkert, Andreas A1 - Lehmann, Jens A1 - Eich, G. ED - Castro-Borges, P. ED - Moreno, E.I. ED - Sakai, K. ED - Gjorv, O.E. ED - Banthia, N. T1 - Risk of stress corrosion cracking of prestressing steels in contact with galvanized components T2 - CONSEC`10 - 6th International conference on concrete under severe conditions CY - Mérida, Yucatán, Mexico DA - 2010-06-07 KW - Prestressing steel KW - Galvanized elements KW - Galvanic corrosion KW - Hydrogen evolution KW - Hydrogen-induced stress corrosion cracking PY - 2010 SN - 978-0-415-59316-8 VL - 1 SP - 239 EP - 246 PB - Taylor & Francis CY - London, UK AN - OPUS4-22037 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marchetti, Barbara A1 - von Chrzanowski, Lars A1 - Beckmann, Jörg A1 - Röseler, A. A1 - Schade, U. T1 - THz Spectroscopy to derive the optical constants of liquids N2 - THz stand-off detection of explosives and other hazardous liquids in public areas becomes more and more relevant and with it the knowledge of their optical properties. We present here both the results of THz transmission spectroscopy measurements and spectroscopic ellipsometry measurements on liquids and their mixtures. T2 - IRMMW-THz 2010 - 35th International conference on infrared, millimeter, and terahertz waves CY - Rome, Italy DA - 2010-09-05 KW - THz Spectroscopy KW - Optical constants KW - Liquids PY - 2010 SN - 978-1-4244-6656-6 DO - https://doi.org/10.1109/ICIMW.2010.5612487 SP - 1 EP - 2 AN - OPUS4-22045 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gradt, Thomas ED - Czichos, Horst ED - Habig, K.-H. T1 - Vakuumtribologie KW - Tribologie KW - Kryotechnik KW - Vakuumtechnik KW - Festschmierstoffe KW - Polymerkomposite PY - 2010 SN - 978-3-8348-1810-2 SP - 586 EP - 598 PB - Springer-Vieweg CY - Wiesbaden ET - 3. Aufl. AN - OPUS4-22076 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gradt, Thomas ED - Czichos, Horst ED - Habig, K.-H. T1 - Tieftemperaturtribologie KW - Tribologie KW - Kryotechnik KW - Vakuumtechnik KW - Festschmierstoffe KW - Polymerkomposite PY - 2010 SN - 978-3-8348-1810-2 SP - 599 EP - 610 PB - Springer-Vieweg CY - Wiesbaden ET - 3. Aufl. AN - OPUS4-22078 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neumann, Patrick P. A1 - Bartholmai, Matthias A1 - Schiller, J.H. A1 - Wiggerich, B. A1 - Manolov, Manol T1 - Micro-drone for the characterization and self-optimizing search of hazardous gaseous substance sources: A new approach to determine wind speed and direction N2 - BAM Federal Institute for Materials Research and Testing, in cooperation with the AirRobot GmbH & Co. KG company, has developed a flying remote-controlled measuring system. The system is capable of operating in a variety of scenarios of gas emissions, e.g. exhaust gas from chimneys, flue gas in a fire, gas emissions in the case of an accident of chemical or hazardous goods or in the case of a terrorist act involving toxic gases. Thus it can measure the gas concentration in the immediate vicinity of the object which causes the emission. A further stage of extension is to enhance the system for plume tracking and identification of sources of hazardous gases. T2 - ROSE 2010 - IEEE International workshop on robotic and sensors environments CY - Phoenix, Arizona, USA DA - 2010-10-15 KW - Autonomous robot KW - UAV KW - Quadrocopter KW - Mobile sensing system KW - Chemical sensing KW - Gas sensors KW - Chemical source localization KW - Plume tracking KW - Anemometric sensor KW - Wind speed and direction PY - 2010 SN - 978-1-4244-7146-1 DO - https://doi.org/10.1109/ROSE.2010.5675265 IS - Session 1 - Intelligent Sensing SP - 1 EP - 6 AN - OPUS4-22189 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lang, Cindy A1 - Hübert, Thomas ED - Gerlach, G. ED - Hauptmann, P. T1 - Sensoren zum Monitoring des Nachernteverhaltens pflanzlicher Frischeprodukte T2 - 9. Dresdner Sensor-Symposium CY - Dresden, Deutschland DA - 2009-12-07 PY - 2009 SN - 978-3-941298-44-6 N1 - Serientitel: Dresdner Beiträge zur Sensorik – Series title: Dresdner Beiträge zur Sensorik VL - 39 SP - 289 EP - 292 PB - TUDpress, Verlag der Wissenschaften GmbH AN - OPUS4-22166 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Perret, Birgit A1 - Schartel, Bernhard A1 - Stöß, K. A1 - Diederichs, J. A1 - Ciesielski, M. A1 - Döring, M. A1 - Krämer, J. A1 - Altstädt, V. ED - Lewin, M. T1 - Novel phosphorus-based flame retardants for epoxy resins and carbon fiber composites: Decomposition mechanisms and fire behavior T2 - 21st Annual conference on recent advances on flame retardancy of polymeric materials CY - Stamford, USA DA - 2010-05-24 KW - DOPO KW - Fire retardancy KW - Flammability KW - Pyrolysis KW - Epoxy resin KW - Composites PY - 2010 SN - 1-59623-619-1 VL - 21 SP - 134 EP - 145 PB - BCC Research AN - OPUS4-22162 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Torge, Manfred A1 - Möhrle, G. A1 - Brinkmann, U. A1 - Flügge, M. ED - Shepard, M.B. ED - Pilosi, L. ED - Strobl, S. T1 - Naturwissenschaftliche Untersuchungen an den mittelalterlichen Chorfenstern der Marienkirche in Frankfurt (Oder) und deren Konservierung T2 - Forum for the conservation stained glass - The art of collaboration stained-glass conservation in the twenty-first century CY - New York, USA DA - 2009-06-01 KW - Restaurierung KW - Glasmalerei KW - Glasanalysen PY - 2009 SN - 978-1-905375-46-2 N1 - Serientitel: Corpus Vitrearum United States of America Occasional Papers – Series title: Corpus Vitrearum United States of America Occasional Papers VL - II SP - 201 EP - 209 PB - Harvey Miller Publishers AN - OPUS4-22174 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stattaus, Kim A1 - Kurth, Lutz A1 - Dutschke, Andreas A1 - Kästorf, Nadine A1 - Lohrer, Christian T1 - Impacts of various conditionings on performance parameters of category 4 fireworks shells T2 - 12th International symposium on fireworks CY - Porto/Gaia, Portugal DA - 2010-10-11 KW - Pre-normative research KW - Standardisation KW - Height measurements PY - 2010 SN - 978-0-9867279-0-0 SN - 978-0-9867279-1-7 SP - 290 EP - 300 AN - OPUS4-22179 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lohrer, Christian T1 - Standardisation of fireworks - quo vadis? T2 - 12th International symposium on fireworks CY - Porto/Gaia, Portugal DA - 2010-10-11 KW - CEN TC 212 KW - Fireworks and theatrical pyrotechnic articles PY - 2010 SN - 978-0-9867279-0-0 SN - 978-0-9867279-1-7 SP - 182 EP - 188 AN - OPUS4-22180 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lutze, Romy A1 - Dutschke, Andreas A1 - Lohrer, Christian A1 - Kurth, Lutz T1 - Emission studies of the theatrical pyrotechnic articles under defined boundary conditions T2 - 12th International symposium on fireworks CY - Porto/Gaia, Portugal DA - 2010-10-11 KW - Aerosols KW - Combustion KW - FMPS KW - FT-IR PY - 2010 SN - 978-0-9867279-0-0 SN - 978-0-9867279-1-7 SP - 190 EP - 206 AN - OPUS4-22181 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jakubowski, Norbert A1 - Prohaska, T. A1 - Roos, P.H. ED - Beauchemin, D. ED - Matthews, D. T1 - Polyatomic ions with double-focusing magnet sector mass spectrometers KW - ICP-MS KW - Sektorfeldgeräte PY - 2010 SN - 978-0-08-043804-7 VL - 5 SP - 132 EP - 150 PB - Elsevier CY - Oxford, UK AN - OPUS4-22237 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bartholmai, Matthias A1 - Neumann, Patrick P. ED - Fujita, H. ED - Sasaki, J. T1 - Micro-drone for gas measurement in hazardous scenarios via remote sensing T2 - 6th WSEAS International conference on REMOTE SENSING (REMOTE '10) CY - Iwate, Japan DA - 2010-10-04 KW - Remote sensing KW - Micro-drone KW - UAV KW - Gas measurement KW - Emission control KW - Data mapping KW - Monitoring KW - Plume tracking PY - 2010 SN - 978-960-474-233-2 SN - 1792-5088 SP - 149 EP - 152 PB - WSEAS Press AN - OPUS4-22275 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Simone ED - Schulz, E. T1 - Rauchgasanalyse und Brandverhalten von verschiedenen Sitzmaterialien im Transportsektor T2 - 5. Internationale Expertentagung Bahnbrandschutz CY - Wien, Österreich DA - 2010-10-21 KW - Upholstered seats KW - FTIR spectroscopy KW - Combustion KW - Smouldering KW - Fire behaviour PY - 2010 SN - 978-3-940727-23-7 VL - 30 SP - 4 EP - 15 PB - IFV Bahntechnik CY - Berlin AN - OPUS4-22279 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühn, Hans-Joachim A1 - Aegerter, J. A1 - Uhlemann, Patrick ED - Borsutzki, M. ED - Geisler, S. T1 - Bestimmung des Elastizitätsmoduls im einachsigen Zugversuch T2 - Tagung Werkstoffprüfung 2009 - Fortschritte der Kennwertermittlung für Forschung und Praxis CY - Bad Neuenahr, Deutschland DA - 2009-12-03 KW - Elastizitätsmodul KW - Zugversuch KW - Überlagerte Biegung KW - Biegedehnung PY - 2009 SN - 978-3-514-00769-7 SP - 137 EP - 142 PB - Verl. Stahleisen GmbH AN - OPUS4-22280 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Hillemeier, B. A1 - Walther, A. T1 - Condition assessment of a 45-year-old prestressed concrete bridge using NDT and verification of the results T2 - NDE/NDT for highways and bridges - Structural materials technology (SMT) CY - New York, USA DA - 2010-08-16 KW - Zerstörungsfreie Prüfung im Bauwesen KW - ZfP im Bauwesen KW - Remananzmagnetismus KW - Spanndrahtbrüche KW - Bildgebende Darstellung KW - Automatisierung PY - 2010 SN - 978-1-57117-211-2 SP - 280 EP - 287 CY - Columbus, OH, USA AN - OPUS4-22213 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfennig, Anja A1 - Wojtas, P. A1 - Spengler, I. A1 - Linke, B. A1 - Kranzmann, Axel ED - Villacampa, V. ED - Brebbia, C.A. ED - Mammoli, A.A. T1 - Influence of heat treatment on the corrosion behavior of steels exposed to CCS environment N2 - The influence of heat treatment on pit corrosion needs to be considered to guarantee reliability and safety during the injection of compressed emission gasses – mainly containing CO2 – into deep geological layers (CCS-technology, Carbon Capture and Storage). In laboratory experiments different heat treated steels used as injection pipe with 13% Chromium and 0.46% Carbon (X46Cr13, 1.4034) as well as 0.2% Carbon (X20Cr13, 1.4021) were tested. Also X5CrNiCuNb16-4 (1.4542) was investigated as typical steel used for geothermal pumps. Keeping stable environmental conditions in laboratory experiments the samples were exposed to the distinct synthetic aquifer environment saturated with technical CO2 at a flow rate of 3 l/h for up to 6 months. Independent of the exposure time the least amount of pits is found on hardened steels with martensitic microstructure where X5CrNiCuNb16-4 shows fewer pits than X46Cr13 and X20Cr13. Regarding steels with similar Cr-content the higher Ccontent in 1.4034 results in fewer pits compared to 1.4021. KW - Steel KW - Heat treatment KW - Pit corrosion KW - CCS KW - CO2-injection KW - CO2-storage PY - 2011 SN - 978-1-84564-508-3 DO - https://doi.org/10.2495/ESUS110411 SN - 1746-448X SN - 1743-3541 SP - 487 EP - 498 PB - WIT Press CY - Southampton, UK AN - OPUS4-23840 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reuther, F. A1 - Krüger, Ralph-Peter A1 - Schulz, Günter A1 - Baehr, G. A1 - Westerwelle, U. A1 - Gruetzner, G. ED - Houlihan, F. M. T1 - Tailored novolak resins for advanced photoresists by a two-step procedure - new insight into the molecular structure by coupling GPC and MALDI-TOF-MS T2 - 17th Annual SPIE Conference on Advances in Resist Technology and Processing CY - Santa Clara, CA, USA DA - 2000-02-28 KW - Novolak KW - Structure KW - Synthesis KW - Gel permeation KW - Chromatography KW - MALDI-TOF-MS PY - 2000 SN - 0-8194-3617-8 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 3999 SP - 464 EP - 471 PB - SPIE CY - Bellingham AN - OPUS4-2171 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Langenberg, K. J. A1 - Marklein, R. A1 - Mayer, K. A1 - Krylow, T. A1 - Ampha, P. A1 - Streicher, Doreen A1 - Krause, Martin ED - Pinto, I. M. T1 - Wavefield inversion in nondestructive testing T2 - Workshop/Minisymposium on "Electromagnetics in a Complex World: Challenges and Perspectives" CY - Benevento, Italy DA - 2003-02-20 PY - 2003 SN - 3-540-20235-8 SN - 0930-8989 N1 - Serientitel: Springer proceedings in physics – Series title: Springer proceedings in physics IS - 96 SP - 1 EP - 10(?) PB - Springer CY - Berlin AN - OPUS4-2357 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Österle, Werner A1 - Urban, Ingrid A1 - Kleinlein, H. A1 - Loemba, A. A1 - Trepte, S. T1 - Reibschichtbildung und mögliche Einflüsse auf Reibschwingungen bei einem Bahn-Bremsbelag T2 - Tagung CY - Hannover, Deutschland DA - 2002-11-26 PY - 2002 SN - 3-18-091736-9 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1736 SP - 283 EP - 296 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-2373 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Crail, S. A1 - Reichel, D. A1 - Schreiner, U. A1 - Lindner, E. A1 - Habel, Wolfgang A1 - Hofmann, Detlef A1 - Basedau, Frank A1 - Barner, Andreas ED - Casciati, F. T1 - Strain Monitoring of a High Speed Railway Track Using Embedded Fibre-Optic Sensors PY - 2003 SN - 0-471-48980-8 VL - 2 SP - 903 EP - 909 PB - Wiley CY - Chichester AN - OPUS4-2374 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang A1 - Kohlhoff, Harald A1 - Knapp, Jürgen A1 - Helmerich, Rosemarie A1 - Inaudi, D. ED - Casciati, F. T1 - Complex measurement system for long-term monitoring of prestressed railways bridges in the new Lehrter Bahnhof in Berlin T2 - 3rd World Conference on Structural Control (WCSC-3) CY - Como, Italy DA - 2002-04-07 KW - Monitoring KW - Structure behaviour KW - Fibre-optic sensors KW - Data acquisition PY - 2003 SN - 0-471-48980-8 VL - 2 SP - 713 EP - 719 PB - Wiley CY - Chichester AN - OPUS4-2375 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Belotserkovsky, A. A1 - Samadurau, Uladzimir A1 - Jaenisch, Gerd-Rüdiger A1 - Artemiev, Valentin M. T1 - Kalman Filter Reconstruciton and Image Post-Processing for Flow Pattern Recognition T2 - 7th International Conference PRIP 2003 CY - Minsk, Republic of Belarus DA - 2003-05-21 PY - 2003 SN - 985-6453-90-9 N1 - Geburtsname von Jaenisch, Gerd-Rüdiger: Tillack, G.-R. - Birth name of Jaenisch, Gerd-Rüdiger: Tillack, G.-R. VL - 1 SP - 97 EP - 102 CY - Minsk AN - OPUS4-2379 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Österle, Werner A1 - Gesatzke, Wolfgang ED - Bilde-Sørensen, J. T1 - Dislocation-particle interaction during secondary hardening and yielding of HSLA steel T2 - 4th International Symposium on Metallurgy and Materials Science ; 4th International Symposium on Deformation of Multi-phase and Particle Containing Materials CY - Risø, Denmark DA - 1983-09-05 PY - 1983 SN - 87-550-0946-8 VL - 4 SP - 473 EP - 478 PB - Risø National Laboratory CY - Roskilde AN - OPUS4-2391 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wieser, Karol E. T1 - Different fracture safety philosophies - Do they impair the Type B(U)-concept? T2 - International Symposium on the Packaging and Transportation of Radioactive Materials ; PATRAM 86 CY - Davos, Switzerland DA - 1986-06-16 PY - 1986 SN - 92-0-020187-3 SN - 0074-1876 IS - 718,2 SP - 689 EP - 694 CY - Vienna AN - OPUS4-2329 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wieser, Karol E. T1 - Compliance assurance in the Federal Republic of Germany T2 - International Symposium on the Packaging and Transportation of Radioactive Materials ; PATRAM 86 CY - Davos, Switzerland DA - 1986-06-16 PY - 1986 SN - 92-0-020087-7 SN - 0074-1876 IS - 718,1 SP - 95 EP - 102 CY - Vienna AN - OPUS4-2330 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Anderson, R. A1 - Wieser, Karol E. A1 - Bonifacio, A. A1 - Kingsley, K. A1 - Bittner, R. A1 - Ankrum, G. T1 - The quality assurance topical report - International co-operation for manufacturing of nuclear packages T2 - 8th International Symposium on the Packaging and Transportation of Radioactive Materials ; PATRAM 86 CY - Davos, Switzerland DA - 1986-06-16 PY - 1987 SN - 92-0-020087-7 SN - 0074-1876 IS - 718,1 SP - 237 EP - 244 CY - Vienna AN - OPUS4-2331 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wieser, Karol E. A1 - Gogolin, Bernd T1 - Risk Minimization for Shipping and Storage Containers for Radioactive Materials by Performance Testing T2 - International IMEKO/GESA Symposium ; International Symposium on Risk Minimization by Experimental Mechanics CY - Düsseldorf, Germany DA - 1992-04-28 PY - 1992 SN - 3-18-090940-4 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 940 SP - 273 EP - 286 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-2346 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wieser, Karol E. T1 - Testing and Certification activities under the Legislation on the transport of dangerous goods T2 - 3rd EUROLAB Symposium CY - Berlin, Germany DA - 1996-06-05 PY - 1996 SN - 3-89429-715-8 N1 - Serientitel: EUROLAB Symposium – Series title: EUROLAB Symposium IS - 3 SP - 114 EP - 119 PB - Wirtschaftsverl. NW CY - Bremerhaven AN - OPUS4-2349 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wieser, Karol E. ED - Rielke, S. T1 - Anforderungen an den Transport radioaktiver Stoffe - Ableitungen für andere gefährliche Güter T2 - Beförderung gefährlicher Güter CY - Berlin, Deutschland DA - 1988-11-10 PY - 1989 SN - 0418-9183 N1 - Serientitel: Schriftenreihe der Deutschen Verkehrswissenschaftlichen Gesellschaft. Reihe B – Series title: Schriftenreihe der Deutschen Verkehrswissenschaftlichen Gesellschaft. Reihe B IS - 118 PB - Deutsche Verkehrswissenschaftliche Gesellschaft CY - Bergisch Gladbach AN - OPUS4-2335 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wieser, Karol E. A1 - Droste, Bernhard ED - Warnecke, E. ED - Giller, H. T1 - Behälter zur Endlagerung radioaktiver Stoffe - Baumusterprüfung und qualitätssichernde Maßnahmen T2 - 85. PTB-Seminar CY - Braunschweig, Deutschland DA - 1989-07-17 PY - 1989 SN - 3-88314-942-X SN - 0721-0892 N1 - Serientitel: PTB-Bericht – Series title: PTB-Bericht VL - 25 IS - SE-25 SP - 151 EP - 166 PB - Wirtschaftsverl. CY - Bremerhaven AN - OPUS4-2336 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Streicher, Doreen A1 - Krause, Martin A1 - Kohl, Christoph A1 - Schickert, M. A1 - Kroggel, O. A1 - Müller, W. T1 - Parameters for the Quantitative Assessment of Ulrasonic Imaging for Concrete Elements N2 - Ultrasonic investigation is an established non-destructive testing method for detection of defects and material characterisation. In the last years scanning ultrasonic echo methods were developed especially for the application in civil engineering. The different scanning ultrasonic echo methods are modified with respect to the type of the transducer applied, the number and the arrangement of transducers and the frequency used. Also different algorithms are used to analyse the measured data, for instance SAFT (Synthetic Aperture Focusing Technique) reconstruction. The results are typically presented as B- and C-scans, obtained from raw data or the SAFT reconstructed data. Since 2001 several German research institutes co-operate within the scope of the research initiative Non-destructive Evaluation of Concrete Structures Using Acoustic and Electromagnetic Echo-Methods (FOR 384) supported by the Deutsche Forschungsgemeinschaft (DFG). One of the tasks is to investigate these ultrasonic echo methods for special applications like the detection of cavities in concrete structures or faults in tendon ducts. Concrete test specimens with intentional faults have been manufactured and investigated. Parameters were defined to assess the results more objectively. Currently three parameters -signal/noise-ratio, lateral edge resolution and uniformity- are considered. For the first time results of different working groups on the same imaged objects are compared quantitatively. It should help to get more knowledge about the ultrasonic inspection of typical faults in civil engineering structures. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/p050/p050.htm SN - 3-931381-49-8 SP - 1(?) EP - 12(?) PB - DGZfP CY - Berlin AN - OPUS4-2751 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lange, F. A1 - Hörmann, E. A1 - Schwarz, G. A1 - Droste, Bernhard A1 - Völzke, Holger A1 - Wieser, Günter T1 - Spent Fuel Transport and Storage Casks under Extreme Accidents T2 - 10th International High-Level Radioactive Waste Management Conference (IHLRWM-10) CY - Las Vegas, NV, USA DA - 2003-03-30 PY - 2003 SN - 0-89448-669-1 SP - 465 EP - 470 PB - American Nuclear Society CY - La Grange Park, Ill. AN - OPUS4-2698 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Appajaiah, Anilkumar A1 - Kretzschmar, Hans-Jürgen T1 - Climatic aging of PMMA based polymer optical fibres (POF) - Analysis of polymer degradation T2 - 3rd International IEEE Conference on Polymers and Adhesives in Microelectronics and Phonics ; 3rd Polytronics 2003 CY - Montreux, Switzerland DA - 2003-10-21 KW - Polymer optical fibres KW - Climatic aging KW - Degradation KW - Humidity PY - 2003 SN - 2-8481-3023-7 SP - 57 EP - 62 PB - TIMA Laboratory CY - Grenoble AN - OPUS4-2702 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hoffmann, Katrin A1 - Marlow, F. ED - Auerbach, S. M. ED - Carrado, K. A. ED - Dutta, P. K. T1 - Molecular sieve-based materials for photonic applications PY - 2003 SN - 0-8247-4020-3 DO - https://doi.org/10.1201/9780203911167.ch18 SP - 921 EP - 949 PB - Dekker CY - New York AN - OPUS4-2713 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Schulz, Ulrich A1 - Trubiroha, Peter T1 - Adaption of the acid dew and fog (ADF) test for service life predicitons of aircraft coatings T2 - 1st European Weathering Symposium (EWS-1) ; 23rd Colloquium of Danubian Countries on Natural and Artificial Ageing of Polymers CY - Prague, Czech Republic DA - 2003-09-25 KW - Acid dew and fog test KW - Aircraft coatings KW - Service life prediction KW - Climatic resistance KW - Säure KW - Klima KW - Flugzeuglack PY - 2003 SN - 3-9808382-3-4 SP - 1 EP - 16(?) PB - Gesellschaft für Umweltsimulation e.V. CY - Pfinztal AN - OPUS4-2689 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Achim A1 - Alber, D. T1 - Bestimmung von Kobalt in Nickel bei Gehalten im sub-mu/g Bereich T2 - GDCh-Jahrestagung Chemie 2003 ; Jahrestagung der Fachgruppe Nuklearchemie ; 19. Seminar Aktivierungsanalyse CY - München, Deutschland DA - 2003-10-06 PY - 2003 SN - 3-936028-14-1 N1 - Serientitel: Kurzreferate / GDCh-Jahrestagung Chemie 2003 – Series title: Kurzreferate / GDCh-Jahrestagung Chemie 2003 IS - 5 SP - 4 PB - Gesellschaft Deutscher Chemiker CY - Frankfurt am Main AN - OPUS4-2675 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Steiger, Thomas A1 - Pradel, Rita T1 - COMAR2 - die internationale Datenbank für zertifizierte Referenzmaterialien im Internet T2 - GDCh-Jahrestagung Chemie 2003 ; Symposium der Fachgruppe Anstrichstoffe und Pigmente ; 17. Workshop der Fachgruppe Chemie-Information-Computer ; Jahrestagung der Fachgruppe Freiberufliche Chemiker und Inhaber Freier Unabhängiger Laboratorien CY - München, Deutschland DA - 2003-10-06 PY - 2003 SN - 3-936028-20-6 IS - 11 SP - 48 PB - Gesellschaft Deutscher Chemiker CY - Frankfurt am Main AN - OPUS4-2677 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rücker, Werner A1 - Mehdianpour, Milad T1 - Bauwerkinspektion und Überwachung - Neuere Verfahren und aktuelle Forschung T2 - Fachtagung "Sonderkapitel aus dem Brücken- und Ingenieurbau" CY - Berlin, Deutschland DA - 2003-10-21 KW - Ingenieurbau KW - Brückenbau KW - Inspektionen KW - Tragsicherheit KW - Bewertungsverfahren KW - Risikobeurteilung PY - 2003 SN - 3-86509-043-5 SP - 76 EP - 86 PB - Wirtschaftsverl. NW, Verl. für neue Wissenschaft CY - Bremerhaven AN - OPUS4-2735 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rohrmann, Rolf A1 - Said, Samir A1 - Schmid, Wolfgang T1 - Last- und Zustandsüberwachung der Putlitzbrücke in Berlin-Moabit T2 - Fachtagung "Sonderkapitel aus dem Brücken- und Ingenieurbau" CY - Berlin, Deutschland DA - 2003-10-21 KW - Tragfähigkeit von Brücken KW - Dynamische Untersuchungen KW - Dauerüberwachung KW - Schwerlastverkehr PY - 2003 SN - 3-86509-043-5 SP - 100 EP - 108 PB - Wirtschaftsverl. NW, Verl. für neue Wissenschaft CY - Bremerhaven AN - OPUS4-2736 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hässelbarth, Werner T1 - Handling of bias in uncertainty estimation T2 - 11e Congrès International de Métrologie ; 11th International Metrology Congress CY - Toulon, France DA - 2003-10-20 PY - 2003 SN - 2-915416-00-1 PB - Collège Français de Métrologie CY - Paris AN - OPUS4-2737 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Werner ED - Egloffstein, T. T1 - Anforderungen an Kunststoff-Dränelemente für die langfristig sichere Entwässerung von Oberflächenabdichtungen T2 - 13. Karlsruher Deponie- und Altlastenseminar CY - Karlsruhe, Deutschland DA - 2003-09-17 KW - Geokunststoffe KW - Deponieabdichtungen KW - Beständigkeit PY - 2003 SN - 3-503-07485-6 SN - 0171-175X N1 - Serientitel: Abfallwirtschaft in Forschung und Praxis – Series title: Abfallwirtschaft in Forschung und Praxis IS - 128 SP - 107 EP - 118 PB - E. Schmidt CY - Berlin AN - OPUS4-2740 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Steckert, Carsten ED - Mazal, P. T1 - Optical Surface Inspection of Paint Coatings by Colorimetrically Adjusted Image Analysis T2 - 2nd International Workshop of NDT Experts CY - Prague, Czech Republic DA - 2003-10-06 KW - Paint coatings KW - Inhomogeneous surface changes KW - Quality assurance KW - Analytical device calibration KW - Colour image analysis PY - 2003 SN - 80-2142475-3 SP - 267 EP - 276 PB - Univ. of Technology CY - Brno AN - OPUS4-2718 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maultzsch, Matthias A1 - Mellmann, Günter A1 - Meinhold, Uwe ED - Stark, J. ED - Fischer, H.-B. T1 - Eigenschaften hochwertiger Betone aus aufbereitetem Bauschutt T2 - 15. Ibausil - Internationale Baustofftagung CY - Weimar, Deutschland DA - 2003-09-24 PY - 2003 SN - 3-00-010932-3 VL - 1 SP - 1-0033-1-0047 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-2719 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ullner, Christian A1 - Vogt, C.-Ch. A1 - Frenz, H. ED - Richter, D. ED - Wöger, W. ED - Hässelbarth, W. T1 - Special features in proficiency tests of mechanical testing laboratories T2 - 178. PTB-Seminar CY - Braunschweig, Germany DA - 2003-01-01 PY - 2003 SN - 3-89701-966-3 SN - 0942-1785 N1 - Serientitel: PTB-Bericht : IT, Informationstechnik – Series title: PTB-Bericht : IT, Informationstechnik IS - 10 SP - 47 EP - 53 PB - Wirtschaftsverl. NW CY - Bremerhaven AN - OPUS4-2721 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Steckert, Carsten A1 - Witt, Klaus A1 - Richter, Klaus T1 - Elektronische Hilfsmittel zur Qualitätssicherung dekorativer Beschichtungen auf Aluminium bei Freibewitterung T2 - Tagung Aluminium-Anwendungen : neue Entwicklungen in der Oberflächentechnik CY - Düsseldorf, Deutschland DA - 1998-03-10 PY - 1998 SN - 3-932287-36-3 IS - 36 SP - 159 EP - 166 PB - DFO CY - Düsseldorf AN - OPUS4-2722 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molnarne, Maria A1 - Möller, W. O. ED - Bradley, D. ED - Drysdale, D. ED - Molkov, V. T1 - Database Chemsafe - A basis for estimation methods T2 - 4th International Seminar Fire and Explosion Hazards CY - Londonderry, Northern Ireland, UK DA - 2003-09-08 PY - 2004 SN - 1-85923-186-1 SP - 147 EP - 148 PB - FireSERT, University of Ulster CY - Newtonabbey AN - OPUS4-2726 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Werner, Klaus-Dieter A1 - Niemann, Joachim A1 - Kohlhoff, Harald T1 - Langzeitmonitoring Lehrter Bahnhof T2 - Fachtagung "Sonderkapitel aus dem Brücken- und Ingenieurbau" CY - Berlin, Deutschland DA - 2003-10-21 KW - Monitoring KW - Bauwerksüberwachung KW - Sensoren PY - 2003 SN - 3-86509-043-5 SP - 92 EP - 99 PB - Wirtschaftsverl. NW, Verl. für neue Wissenschaft CY - Bremerhaven AN - OPUS4-2727 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Niemann, Joachim A1 - Peschke, Hans-Joachim A1 - Werner, Klaus-Dieter T1 - Erfahrungen und Ergebnisse des Monitorings am Lehrter Bahnhof, Berlin T2 - 21. GESA-Symposium 2003 CY - Braunschweig, Deutschland DA - 2003-06-12 PY - 2003 SN - 3-18-091757-1 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1757 SP - 245 EP - 252 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-2728 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Kohlhoff, Harald A1 - Niemann, Joachim A1 - Werner, Klaus-Dieter T1 - Structural Condition Monitoring of a high-speed train station T2 - IABSE symposium 2003 CY - Antwerp, Belgium DA - 2003-08-27 KW - Long term monitoring KW - Vertical displacement KW - Strain measurement KW - Fibre optic sensors KW - Hydrostatic levelling system KW - Online data KW - Web presentation PY - 2003 SN - 3-85748-109-9 N1 - Serientitel: IABSE reports – Series title: IABSE reports IS - 87 SP - 18 EP - 19 PB - IABSE CY - Zürich AN - OPUS4-2729 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vater, Ernst-Joachim A1 - Altkrüger, Sabine T1 - Verbundfestigkeit und Rissüberbrückung bei Fahrbahnbelägen für Betonbrücken T2 - Fachtagung "Sonderkapitel aus dem Brücken- und Ingenieurbau" CY - Berlin, Deutschland DA - 2003-10-21 PY - 2003 SN - 3-86509-043-5 SP - 28 EP - 31 PB - Wirtschaftsverl. NW, Verl. für neue Wissenschaft CY - Bremerhaven AN - OPUS4-2731 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mayer, Norbert A1 - Munschau, Jürgen A1 - Vater, Ernst-Joachim T1 - Untersuchungen zum Spannungszustand in Brücken-Belagssystemen T2 - Fachtagung "Sonderkapitel aus dem Brücken- und Ingenieurbau" CY - Berlin, Deutschland DA - 2003-10-21 PY - 2003 SN - 3-86509-043-5 SP - 40 EP - 43 PB - Wirtschaftsverl. NW, Verl. für neue Wissenschaft CY - Bremerhaven AN - OPUS4-2733 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mellmann, Günter A1 - Meinhold, Uwe A1 - Maultzsch, Matthias T1 - Untergrundvorbehandlung bei der Anwendung von Spritzbeton T2 - Fachtagung "Sonderkapitel aus dem Brücken- und Ingenieurbau" CY - Berlin, Deutschland DA - 2003-10-21 PY - 2003 SN - 3-86509-043-5 SP - 72 EP - 75 PB - Wirtschaftsverl. NW, Verl. für neue Wissenschaft CY - Bremerhaven AN - OPUS4-2734 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Aßmus, Kristin A1 - Hübner, Wolfgang A1 - Pyzalla, A.R. A1 - Pinto, H.C. T1 - Die Entwicklung des Gefüges in der Verschleißspur bei Gleitverschleiß von FeCrNi-Legierungen T2 - 44. Tribologie-Fachtagung CY - Göttingen, Deutschland DA - 2003-09-22 PY - 2003 SN - 3-00-003404-8 VL - 1 SP - 6-1-6-8 PB - GfT CY - Moers AN - OPUS4-2667 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kohl, Christoph A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Mayer, K. A1 - Wöstmann, Jens A1 - Wiggenhauser, Herbert T1 - 3D-Visualisation of NDT-Data using Data Fusion Technique N2 - Non-destructive testing (NDT) of concrete structures is performed using pulse-echo methods. According to the type of the applied waves it can be classified as acoustic (Impact-Echo, Ultrasonics) and electromagnetic methods (Radar). The results are visualised through different imaging processes. This work is performed in the frame of a research project promoted by Deutsche Forschungsgemeinschaft (FOR384).The objective of data fusion is to use the complementary information of the different methods. Radar can detect metallic reflectors in concrete (metallic ducts and concrete reinforcement) very well. This method is not able to locate defects behind these reflectors (injecting defects, defects behind close concrete reinforcement), because the electromagnetic waves are completely reflected at metals. The acoustic methods are able to compensate this deficit i.e. acoustic waves can penetrate through metal. But acoustic waves in the ultrasonic range are completely reflected by air layers. Air layers have smaller influence on radar propagation, so that both methods complement each other.In order to be able to combine the NDT-data from several methods records at the same volume, the different data setsmodes of signals must be adapted. The ultrasonic and radar data have to be reconstructed with programs based on the Synthetic Aperture Focusing Technique (SAFT) before data fusion. Subsequently, a conversion of the data into a uniform format has to be carried out. This is a prerequisite in order to keep the data exchange between the project partners as simple as possible. After the data sets are imported and transferred into a common reference system, they can be processed with operations according to the purpose of the investigation. Results, which have been achieved in concrete test specimen with radar and ultrasonics, will be presented and will show the feasibility of the data fusion method. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 KW - Radar KW - Ultrasonic KW - Data Fusion PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/v023/v023.htm SN - 3-931381-49-8 SP - 1 EP - 11(?) PB - DGZfP CY - Berlin AN - OPUS4-3053 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kohl, Christoph A1 - Maierhofer, Christiane A1 - Krause, Martin A1 - Streicher, Doreen A1 - Wiggenhauser, Herbert ED - Mazal, P. T1 - Data fusion of complementary NDT methods applied in civil engineering T2 - 2nd International Workshop of NDT Experts CY - Prague, Czech Republic DA - 2003-10-06 KW - Non-destructive testing in civil engineering KW - Data fusion KW - Radar KW - Ultrasonics KW - Concrete PY - 2003 SN - 80-2142475-3 SP - 1 EP - 11(?) PB - Univ. of Technology CY - Brno AN - OPUS4-3054 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Aßmus, Kristin A1 - Hübner, Wolfgang A1 - Pyzalla, A.R. A1 - Pinto, H.C. ED - Bartz, Wilfried J. T1 - Structure Transformations in CrNi Steels under Tribological Stressing at Low Temperatures T2 - 14th International Colloquium Tribology, Tribology and Lubrication Engineering CY - Stuttgart, Germany DA - 2004-01-13 PY - 2004 SN - 3-924813-54-X VL - 2 SP - 1047 EP - 1054 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-3055 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter ED - Bartz, Wilfried J. T1 - Towards a Tribological Reference Test - Fretting Test? T2 - 14th International Colloquium Tribology, Tribology and Lubrication Engineering CY - Stuttgart, Germany DA - 2004-01-13 PY - 2004 SN - 3-924813-54-X VL - III SP - 1839 EP - 1846 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-3056 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wäsche, Rolf A1 - Yarim, Rasim A1 - Klaffke, Dieter A1 - Hartelt, Manfred ED - Bartz, Wilfried J. T1 - Oscillating Sliding Wear Behaviour of SiC, TiC, TiB2, 59SiC-41TiB2 and 52SiC-24TiC-24TiB2 Materials up to 750°C in Air T2 - 14th International Colloquium Tribology, Tribology and Lubrication Engineering CY - Stuttgart, Deutschland DA - 2004-01-13 PY - 2004 SN - 3-924813-54-X VL - II SP - 1039 EP - 1045 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-3057 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Wäsche, Rolf A1 - Wötting, G. ED - Bartz, Wilfried J. T1 - Tribological Characterisation of a Sl3N4-TiN Composite Ceramic in Fretting Tests at Room Temperature T2 - 14th International Colloquium Tribology, Tribology and Lubrication Engineering CY - Stuttgart, Germany DA - 2004-01-13 PY - 2004 SN - 3-924813-54-X VL - III SP - 1413 EP - 1420 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-3058 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Wäsche, Rolf A1 - Aldinger, F. A1 - Janakiraman, N. ED - Bartz, Wilfried J. T1 - Tribological investigations on siliconcarbonitride ceramics derived from preceramic polymers T2 - 14th International Colloquium Tribology, Tribology and Lubrication Engineering CY - Stuttgart, Deutschland DA - 2004-01-13 PY - 2004 SN - 3-924813-54-X VL - 3 SP - 1403 EP - 1412 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-3059 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Brand, J. A1 - Brand, C. A1 - Wittorf, R. ED - Bartz, Wilfried J. T1 - Tribological Characterisation of a-C:H Coatings at Room Temperature - Effect of Counterbody Material T2 - 14th International Colloquium Tribology, Tribology and Lubrication Engineering CY - Stuttgart, Germany DA - 2004-01-13 PY - 2004 SN - 3-924813-54-X VL - I SP - 605 EP - 614 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-3037 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter ED - Bartz, Wilfried J. T1 - Tribological Characterisation of Hard Coatings with and without DLC Top Layer in Fretting Tests T2 - 14th International Colloquium Tribology, Tribology and Lubrication Engineering CY - Stuttgart, Germany DA - 2004-01-13 PY - 2004 SN - 3-924813-54-X VL - I SP - 555 EP - 563 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-3040 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Wöstmann, Jens A1 - Hennen, C. T1 - Non-destructive investigation of complex historic masonry structures with impulse radar N2 - For the investigation of the complex inner structure of historic buildings, the application of radar has been increased during the last ten years. Although historic masonry in general is very inhomogeneous and although in some cases high absorption occurs due to enhanced moisture, radar has been successfully applied to get information on geometry, position of inclusions and about kind and size of existing damages. In this paper case studies will be presented concerning the localisation of metallic inclusions and the investigations of the structure of an exterior wall with a multiple leaf structure. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 KW - Non-destructive testing in civil engineering KW - Radar KW - Masonry KW - Cultural Heritage PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/p063/p063.htm SN - 3-931381-49-8 PB - DGZfP CY - Berlin AN - OPUS4-3156 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Wöstmann, Jens A1 - Brink, Arne A1 - Röllig, Mathias T1 - Ortung von Hohlstellen und Ablösungen in Betonkonstruktionen mit Radar und Impuls-Thermografie T2 - 21. GESA-Symposium 2003 CY - Braunschweig, Deutschland DA - 2003-06-12 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Radar KW - Impuls-Thermografie KW - Beton KW - Hohlstellen KW - Ablösungen PY - 2003 SN - 3-18-091757-1 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1757 SP - 281 EP - 292 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-3157 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Röllig, Mathias A1 - Weritz, Friederike A1 - Wiggenhauser, Herbert T1 - Untersuchung von Betonstrukturen mit der Puls-Phasen-Thermografie T2 - Thermografie-Kolloquium 2003 CY - Stuttgart, Deutschland DA - 2003-09-25 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Impuls-Thermografie KW - Puls-Phasen Thermografie KW - Beton KW - Spaltklinker KW - Hohlstellen KW - Ablösungen PY - 2003 UR - http://www.ndt.net/search/docs.php3?date=2006-01&issue=1 SN - 3-931381-51-X N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 86-CD SP - 53 EP - 62 PB - DGZfP CY - Berlin AN - OPUS4-3158 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mayer, K. A1 - Zimmer, A. A1 - Langenberg, K. J. A1 - Kohl, Christoph A1 - Maierhofer, Christiane T1 - Non-Destructive Evaluation of Embedded Structures in Concrete - Modeling and Imaging N2 - We concentrate on appropriate algorithmic processing of microwave Ground Penetrating Radar (GPR) data obtained from concrete specimens containing tendon ducts below steel reinforcement bars either via simulations or via experiments. The goal is to understand the physical phenomena of electromagnetic wave propagation and scattering in detail in order to optimize imaging algorithms like SAFT (Synthetic Aperture Focusing Technique as the NDT version of SAR) in its 3D diffraction tomographic FT-SAFT formulation (Fourier-Transform-SAFT). Therefore we start with the simulation of a "simple" specimen and switch to a more realistic one in order to check whether simulation and experiment can give comparable results. Basically, this could be confirmed, but, nevertheless, various parametric studies will still have to be performed in the future. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 KW - Non-destructive testing in civil engineering KW - Radar KW - Modelling KW - SAFT KW - SAR PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/v022/v022.htm SN - 3-931381-49-8 VL - 85-CD PB - DGZfP CY - Berlin AN - OPUS4-3159 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Ziebolz, A. A1 - Köpp, Christian T1 - ONSITEFORMASONRY - A European Research Project: On-site investigation techniques for the structural evaluation of historic masonry N2 - ONSITEFORMASONRY is a research project funded by the European Commission under the 5. Framework Programme 1998-2002 in the Thematic Programme: Energy, Environment and Sustainable Development and the Key Action: The City of Tomorrow and Cultural Heritage. The main objective of the project is the development and improvement of methodologies for the evaluation of the structure of historic masonry Cultural Heritages. For effective restoration and conservation of historic buildings, a detailed assessment of the structural safety and physical damages of the masonry structure is required. Therefore, typical masonry damages and the most frequent pathologies in each region have been identified and summarised in a catalogue of problems and damages. Selected non-destructive (NDT) and minor-destructive (MDT) techniques are performed by the partners including the development of software packages for fast and automated data analysis. The strategy for an effective and useful combination of different NDT and MDT methods will be worked out considering the results of case studies and taking into account the experiences of the consortium members. Recommendations and guidelines for the application of the integrated methodologies will be developed in close co-operation with end-users. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 KW - Non-destructive testing in civil engineering KW - Radar KW - Ultrasonics KW - Sonics KW - Microseismic KW - Masonry KW - Cultural heritage PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/v070/v070.htm SN - 3-931381-49-8 PB - DGZfP CY - Berlin AN - OPUS4-3161 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Illerhaus, Bernhard A1 - Goebbels, Jürgen A1 - Hort, N. A1 - Potzies, C. A1 - Frank, H. ED - Kainer, K. U. T1 - Non-Destructive Testing of Cast Magnesium Alloys by Computerized Tomography N2 - Summary Beside several favourable properties, like high specific strength and damping capacity, most magnesium alloys also exhibit an excellent castability and are therefore usually fabricated by high pressure die casting. Due to the high casting speed, the melt flow is non-laminar and air can be entrapped during the casting process causing porosity when the melt solidifies. The volume fraction of porosity can be up to 4%. Porosity highly influences the mechanical properties, reducing significantly the values of elongation, tensile strength and especially fatigue strength [1-5]. Additionally, no heat treatment is possible to reach the optimum mechanical properties of the material. An alternative casting technology to reduce porosity is the Thixomolding process where the material is cast in the semi-solid state. Different methods of non-destructive testing are possible to detect and remove affected components to ensure using components with a low content of porosity. One alternative of evaluating the porosity is the computerized tomography (CT). The CT enables a 3-dimensional view of the cast component. T2 - 6th International Conference and Exhibition on Magnesium Alloys and Their Applications CY - Wolfsburg, Germany DA - 2003-11-18 PY - 2003 SN - 3-527-30975-6 DO - https://doi.org/10.1002/3527603565.ch119 VL - 6 SP - 746 EP - 751 PB - Wiley-VCH CY - Weinheim AN - OPUS4-3166 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brekow, Gerhard A1 - Tscharntke, Dirk A1 - Munikoti, Vijayendra K. A1 - Erhard, Anton T1 - Querfehlerprüfung an Mischnahtverbindungen mit Ultraschall T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2003 CY - Mainz, Deutschland DA - 2003-05-26 PY - 2003 UR - http://www.ndt.net/article/dgzfp03/papers/v14/v14.htm SN - 3-931381-47-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 83-CD SP - 1(?) EP - 19(?) PB - DGZfP CY - Berlin AN - OPUS4-3167 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brekow, Gerhard ED - Barbian, O. A. T1 - Automatische Prüfung einer Schmiedewelle mit der Ultraschall-Echotomographie KW - Ortsbezogener Messdateneinzug KW - Kenngrößen automatischer Prüfsysteme KW - Beispiele industriell angewandter automatischer Ultraschall-Prüfsysteme PY - 2003 SN - 3-931381-54-4 SP - 82 EP - 86 PB - DVS-Verl. CY - Düsseldorf AN - OPUS4-3170 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Boehm, Rainer A1 - Erhard, Anton A1 - Rehfeldt, T. T1 - Einfluss fokussierter Schallfelder auf das Reflexionsverhalten von Testfehlern T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2003 CY - Mainz, Deutschland DA - 2003-05-26 KW - Ultraschallprüfung KW - Schallfeld KW - Bauteilkrümmung KW - Fokussierung KW - Phased-Array KW - Reflektorform KW - Reflektorkrümmung KW - Modellierung PY - 2003 UR - http://www.ndt.net/article/dgzfp03/papers/v45/v45.htm SN - 3-931381-47-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 83-CD SP - 1 EP - 14(?) PB - DGZfP CY - Berlin AN - OPUS4-3171 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Boehm, Rainer A1 - Erhard, Anton A1 - Wüstenberg, Hermann A1 - Rehfeldt, T. T1 - Dreidimensionale Berechnung von Schallfeldern unter dem Einfluss zylindrischer Bauteilkrümmungen für fokussierende Prüfköpfe und Gruppenstrahler N2 - Zusammenfassung Das vorgestellte Modell ist in der Lage, Schallfelder in eben oder zylindrisch begrenzten Bauteilen zu berechnen. Die Prüfköpfe können eine einheitliche oder eine aus Elementen zusammengesetzte Schwingerfläche besitzen, die zusätzlich gekrümmt sein darf. Die Einschallrichtung des Prüfkopfes gegenüber der Achse der Oberflächenkrümmung ist beliebig. Die Auswertung kann praxisgerecht und flexibel an die Fragestellung angepasst werden. Die kurzen Rechenzeiten erlauben ein interaktives Arbeiten z.B. für die Prüfkopfkonstruktion und -optimierung. Im ersten Teil werden die Möglichkeiten des Modells demonstriert, und im zweiten Teil wird der Einfluß der Oberflächenkrümmung exemplarisch diskutiert. Dabei werden Modell- und Messergebnisse gegenübergestellt. Es wird gezeigt, dass der Einfluss der Oberflächenkrümmung auf das Schallfeld u.U. erheblich sein kann. Eine hinreichende Verifikation des Modells vorausgesetzt, könnten Empfindlichkeitsfelder im Raum und Abstandskurven mit viel höherer Auflösung erzeugt werden, als dies durch Vergleichskörpermessungen möglich ist, und diese, die darüber hinaus auch sehr kostspielig sind, weitgehend ersetzen. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Ultraschallprüfung KW - Schallfeld KW - Bauteilkrümmung KW - Fokussierung KW - Gruppenstrahler KW - Phased-Array KW - Modellierung KW - Theorie PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v53/v53.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD SP - 1 EP - 9(?) PB - DGZfP CY - Berlin AN - OPUS4-3172 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ziebs, Josef A1 - Meersmann, Jürgen A1 - Kühn, Hans-Joachim A1 - Klingelhöffer, Hellmuth ED - Sehitoglu, H. ED - Maier, H. T1 - Multiaxial Thermo-mechanical Deformation Behavior of IN 738 LC and SC 16 T2 - 3rd Symposium "Thermo-mechanical fatigue behavior of materials" CY - Norfolk, VA, USA DA - 1998-11-04 PY - 2000 SN - 0-8031-2853-3 SN - 0066-0558 N1 - Serientitel: ASTM STP – Series title: ASTM STP VL - 1371 SP - 257 EP - 278 PB - ASTM, American Society for Testing and Materials CY - West Conshohocken, Pa. AN - OPUS4-3128 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Löhr, Manuel A1 - Spaltmann, Dirk A1 - Woydt, Mathias A1 - Santner, Erich ED - Franek, F. ED - Pauschitz, A. T1 - Zuverlässige Wälzsysteme durch DLC-Schichten? Bedeutung und Aufgaben von Schichtsystemen T2 - Symposium der Österreichischen Tribologischen Gesellschaft CY - Wien, Österreich DA - 2003-11-20 PY - 2003 SN - 3-901657-13-4 SP - 59 EP - 68 PB - ÖTG CY - Wien AN - OPUS4-3131 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Krause, Martin ED - Cziesielski, E. T1 - Ultraschallechoverfahren an Holz PY - 2004 SN - 3-433-01705-0 SP - 52 EP - 58 PB - Ernst CY - Berlin AN - OPUS4-3145 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hübner, Wolfgang A1 - Aßmus, Kristin A1 - Pyzalla, A. A1 - Pinto, H. ED - Portella, Pedro Dolabella T1 - Das Gefüge austenitischer FeCrNi-Legierungen nach tribologischer Beanspruchung bei tiefen Temperaturen T2 - 37. Metallographie-Tagung CY - Berlin, Deutschland DA - 2003-09-17 PY - 2004 SN - 3-88355-322-0 SN - 0343-3579 N1 - Serientitel: Sonderbände der praktischen Metallographie – Series title: Sonderbände der praktischen Metallographie IS - 35 SP - 399 EP - 404 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-3146 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Aßmus, Kristin A1 - Binkowski, Sigrid A1 - Hübner, Wolfgang A1 - Klaffke, Dieter A1 - Benemann, Sigrid A1 - Neumann, Christine A1 - Pyzalla, A. A1 - Pinto, H. ED - Portella, Pedro Dolabella T1 - Verformung und Gefügetransformation bei Schwingungsverschleiß von austenitischen FeCrNi-Legierungen T2 - 37. Metallographie-Tagung CY - Berlin, Deutschland DA - 2003-09-17 PY - 2004 SN - 3-88355-322-0 SN - 0343-3579 N1 - Serientitel: Sonderbände der praktischen Metallographie – Series title: Sonderbände der praktischen Metallographie IS - 35 SP - 207 EP - 212 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-3147 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pinto, H. A1 - Stuke, S. A1 - Pyzalla, A. A1 - Hübner, Wolfgang A1 - Aßmus, Kristin T1 - Vergleich der Verformungsmechanismen beim Tieftemperaturverschleiß der austenitischen Stähle 1.4301 und 1.4439 T2 - 44. Tribologie-Fachtagung CY - Göttingen, Deutschland DA - 2003-09-22 PY - 2003 SN - 3-00-003404-8 VL - 1 SP - 7-1-7-10 PB - GfT CY - Moers AN - OPUS4-3148 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Santner, Erich A1 - Spaltmann, Dirk T1 - Reibungsmessungen im Mikro- und Nanobereich T2 - Tagung 2003 CY - Stuttgart, Deutschland DA - 2003-02-12 PY - 2003 SN - 3-18-091669-9 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1669 SP - 191 EP - 200 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-3154 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pyzalla, A. A1 - Pinto, H. A1 - Wild, E. A1 - Poeste, T. A1 - Bohne, C. A1 - Reimers, W. A1 - Aßmus, Kristin A1 - Hübner, Wolfgang A1 - Fischer, A. ED - Bartz, Wilfried J. T1 - Mechanical Stress in Tribo-Layers T2 - 14th International Colloquium Tribology "Tribology and Lubrication Engineering" CY - Stuttgart, Deutschland DA - 2004-01-13 PY - 2004 SN - 3-924813-54-X VL - I SP - 85 EP - 89 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-3144 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Krause, Martin A1 - Rieck, C. A1 - Hillemeier, B. T1 - Use of Low Frequency Ultrasound Echo Technique to Determine Cavities in Wooden Construction Composites T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/p051/p051.htm SN - 3-931381-49-8 SP - 1(?) EP - 9(?) PB - DGZfP CY - Berlin AN - OPUS4-3230 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Jörg A1 - Kautek, Wolfgang T1 - Ultrashort Pulse Laser Interaction with Dielectrics and Polymers N2 - Abstract Femtosecond laser micromachining has excited vivid attention in various industri- al fields and in medicine owing to the advantages of ultrashort laser pulses compared to long-pulse treatment.These are mainly the reduction of the laser fluence needed to induce ablation and the improvement of the contour sharpness of the laser-generated structures. Recently,special attention was paid to femtosecond laser experiments on nonabsorbing in- organic dielectrics.This is due to the fact that optical damage in dielectric optical elements limits the performance of high-power laser systems.Despite the fact that a large variety of organic polymers can be machined with excimer lasers successfully,the involvement of thermal processes can lead to an unsatisfactory quality of the structures.Ultrashort,fs-laser pulses might be an alternative for the treatment of polymers.Therefore,femtosecond laser machining investigations of dielectrics and polymers are reviewed in this paper.Similarities and differences of the ablation behavior of both material classes are discussed.The influ- ence of the bandgap on the ablation threshold in dependence on the pulse duration,the en- hancement of the machining precision with a shortening of the pulse duration,incubation phenomena,and morphological features appearing on the surface after femtosecond laser treatment are mentioned.Possible applications,e.g.,in medicine and biosensors,are de- scribed. KW - Dielectrics KW - Femtosecond laser KW - Micromachining KW - Ablation KW - Polymers PY - 2004 SN - 3-540-40471-6 N1 - Serientitel: Advances in polymer science – Series title: Advances in polymer science IS - 168 SP - 247 EP - 289 PB - Springer CY - Berlin AN - OPUS4-3262 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Harbich, Karl-Wolfram A1 - Hentschel, Manfred P. T1 - Röntgen-Refraktionsanalyse als neues ZfP-Verfahren zur Bestimmung innerer Oberflächen in monolithischer Keramik T2 - DGZfP-Jahrestagung 1992 Zerstörungsfreie Materialprüfung CY - Fulda, Deutschland DA - 1992-04-27 PY - 1992 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 33-1 SP - 786 EP - 792 PB - DGZfP CY - Berlin AN - OPUS4-3270 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hentschel, Manfred P. A1 - Harbich, Karl-Wolfram A1 - Lange, Axel ED - Burke, W. T1 - New X-ray scanning topographic approaches to nondestructive evaluation of composites T2 - International Symposium "Advanced Materials for Lightweight Structures" CY - Noordwijk, Netherlands DA - 1992-03-25 PY - 1992 SN - 92-9092-186-2 N1 - Serientitel: ESA SP – Series title: ESA SP IS - 336 SP - 229 EP - 232 PB - ESTEC, ESA Publ. Division CY - Noordwijk AN - OPUS4-3271 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hampe, Andreas A1 - Harbich, Karl-Wolfram A1 - Hentschel, Manfred P. A1 - Rudolph, Hans-Volker T1 - The Determination of Inner Surfaces in Composites by X-Ray Refraction T2 - 12th International Conference on Composite Materials ; 12th ICCM Europe CY - Paris, France DA - 1999-07-05 PY - 1999 SN - 2-9514526-2-4 IS - 423 CY - Paris AN - OPUS4-3273 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Wolfgang A1 - Torge, Manfred A1 - Adam, Karin A1 - Römich, H. A1 - Weissmann, R. A1 - Drewello, R. ED - Wolff, A. T1 - Naturwissenschaft im Dienst der Restaurierung KW - Kulturguterhaltung KW - Glaszusammensetzung KW - Mikroorganismen PY - 2000 SN - 3-8053-2648-3 SP - 65 EP - 99 PB - von Zabern CY - Mainz AN - OPUS4-3236 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Noack, Volker A1 - Krause, Hans-Joachim T1 - 10 Jahre Personalqualifizierung in der Fügetechnik - Rückblick und Ausblick T2 - Große Schweißtechnische Tagung ; Workshop Hochfeste Feinkornbaustähle ; Workshop Lichtbogenlöten CY - Berlin, Deutschland DA - 2003-09-17 PY - 2003 SN - 3-87155-683-1 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 225 SP - 413 EP - 419 PB - Verl. für Schweißen und Verwandte Verfahren, DVS-Verl. CY - Düsseldorf AN - OPUS4-3237 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Römich, H. A1 - Jägers, E. A1 - Torge, Manfred A1 - Müller, Wolfgang A1 - Adam, Karin ED - Wolff, A. T1 - Reinigung - eine Gratwanderung KW - Kulturguterhaltung KW - Reinigungsmethoden KW - Rasterelektronenmikroskopie PY - 2000 SN - 3-8053-2648-3 SP - 101 EP - 128 PB - von Zabern CY - Mainz AN - OPUS4-3243 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Torge, Manfred ED - Müller, W. T1 - Objekte und Konservierungsversuche KW - Kulturguterhaltung PY - 2002 SN - 3-361-00547-7 SP - 13 EP - 20 PB - Ed. Leipzig CY - Leipzig AN - OPUS4-3247 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Torge, Manfred ED - Müller, W. T1 - Befunde der Kontrolluntersuchungen - Makroskopische Untersuchung KW - Kulturguterhaltung PY - 2002 SN - 3-361-00547-7 SP - 21 EP - 23 PB - Ed. Leipzig CY - Leipzig AN - OPUS4-3248 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilsch, Gerd A1 - Schaurich, Dieter A1 - Weritz, Friederike A1 - Wiggenhauser, Herbert T1 - Laser-induced breakdown spectroscopy for on-site determination of chloride in concrete N2 - The Chloride content is an important factor which influences the durability of concrete structures. The standard methods are mostly intricate, time consuming and require a chemical laboratory. This article describes the application of a spectroscopic method, the laser-induced breakdown spectroscopy (LIBS), for the determination of Chloride contents in concrete and mortar specimens. LIBS can be used on-site, needs no sample preparation and is able to investigate rapidly a large number of different measuring points. The LIBS set-up and the experimental conditions to detect Chlorides are reported. Calibration curves are presented and the limit of detection (LOD) is determined. Results measured on different concrete cores are presented and compared with the results of standard chemical methods. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/v011/v011.htm SN - 3-931381-49-8 SP - 1(?) EP - 11(?) PB - DGZfP CY - Berlin AN - OPUS4-3368 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weritz, Friederike A1 - Wilsch, Gerd A1 - Schaurich, Dieter A1 - Wiggenhauser, Herbert T1 - Laser Induced Breakdown Spectroscopy as a tool for the characterization and sorting of concrete waste material in view of high-order re-use N2 - The high amount of building waste material requires innovative strategies for high-order re-use of the material. With Laser Induced Breakdown Spectroscopy (LIBS) both the elemental composition of building materials and trace elements can be determined with a real-time measurement, even on-site and in a harsh industrial environment. We present the experimental data on heavy metal detection in the ppm concentration range, as well as calibration curves. Further on we demonstrate the characterization of cement and concrete concerning the main components by means of Rankin diagrams. We suggest an implementation of LIBS in the processing of building waste materials to allow a high-order re-use. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/p032/p032.htm SN - 3-931381-49-8 SP - 1(?) EP - 7(?) PB - DGZfP CY - Berlin AN - OPUS4-3369 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Burkert, Andreas A1 - Eich, Gerd A1 - Mietz, Jürgen T1 - Entwicklung eines kombinierten Schutzsystems für chloridbelastete Betonflächen aus Spritzverzinkung mit abdichtender Beschichtung T2 - 2. Kolloquium Gemeinsame Forschung im Korrosionsschutz, Neue Entwicklungen bei Fügeverfahren und Oberflächenschutz CY - Frankfurt am Main, Deutschland DA - 2004-03-02 KW - Stahlbeton KW - Chlorinduzierte Korrosion KW - Thermische Spritzverzinkung KW - Kathodischer Korrosionsschutz KW - Oberflächenschutzsystem PY - 2004 SN - 3-935406-12-6 SP - 72 EP - 83 PB - GfKORR CY - Frankfurt am Main AN - OPUS4-3371 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Werner A1 - Seeger, Stefan A1 - Thies, Martina A1 - Gerloff, Constantin ED - Floss, R. T1 - Long-Term Shear Strength of Multilayer Geosynthetics T2 - 3rd European Geosynthetics Conference "EuroGeo 3" - Geotechnical Engineering with Geosynthetics CY - Munich, Germany DA - 2004-03-01 PY - 2004 SN - 3-00-013305-4 VL - II SP - 429 EP - 434 PB - Deutsche Gesellschaft für Geotechnik CY - München AN - OPUS4-3326 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Harbich, Karl-Wolfram A1 - Hentschel, Manfred P. A1 - Ekenhorst, Derk A1 - Schors, Jörg A1 - Lange, Axel T1 - X-Ray Refraction for NDT of Micro Cracks and Impacts N2 - High performance composites and other light weight materials are generally a comple problem to the performance of nondestructive testing methods. X-ray refraction provide unconventional X-ray scattering techniques to meet the actual demand for improve nondestructive characterization of these advanced materials. Scanning the samples across collimated narrow incident X-ray beam permits to image integral micro-structures (a present) with a resolution of 10 µm. Investigations of samples after strain-induced micro cracks and fibre debonding in impact damaged epoxy are shown. The physics of X-ray refraction are analogous to the well known refraction of light b optical lenses and prisms, governed by Snell's law. The special feature is the deflection a very small angles of few minutes of arc, as the refractive index of X-rays in matter i nearly one. Due to the density differences at inner surfaces most of the incident X-rays ar deflected. As the scattered intensity of refraction is proportional to the specific surface of sample, a reference standard gives a quantitative measure for analytical determinations. Figure 1 represents a two-dimensional damage distribution of an impact in a 0/90° CFR laminate of 3 mm, thickness. Unlike in ultrasonic testing, there is no shadowing effect o the successive layers. By use of X-ray refraction the exact concentration of debonde fibres is calculated for each position. Additionally the refraction allows the selection of th fibre orientation. T2 - 7th European Conference on Non-Destructive Testing (ECNDT) CY - Copenhagen, Denmark DA - 1998-05-26 PY - 1998 UR - http://www.ndt.net/abstract/ecndt98/435.htm SN - 87-986898-0-0 VL - 3 CY - Broendy, Denmark AN - OPUS4-3328 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hentschel, Manfred P. A1 - Ekenhorst, Derk A1 - Harbich, Karl-Wolfram A1 - Lange, Axel A1 - Schors, Jörg ED - Green, R. E. T1 - New X-ray refractography for non-destructive evaluation of advanced materials T2 - 8th International Symposium on Nondestructive Characterization of Materials CY - Boulder, CO, USA DA - 1997-06-15 PY - 1998 SN - 0-306-45900-0 VL - 8 SP - 409 EP - 416 PB - Plenum Press CY - New York AN - OPUS4-3330 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Binkowski, Sigrid A1 - Hübner, Wolfgang A1 - Aßmus, Kristin A1 - Benemann, Sigrid A1 - Österle, Werner ED - Portella, Pedro Dolabella T1 - Charakterisierung des Gefüges der austenitischen FeCrNi-Legierung 1.4876 nach Reibbeanspruchung bei 37 K T2 - 37. Metallographie-Tagung CY - Berlin, Deutschland DA - 2003-09-17 PY - 2004 SN - 3-88355-322-0 SN - 0343-3579 N1 - Serientitel: Sonderbände der praktischen Metallographie – Series title: Sonderbände der praktischen Metallographie IS - 35 SP - 213 EP - 218 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-3420 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Effner, Ute A1 - Löhr, Manuel A1 - Spaltmann, Dirk A1 - Woydt, Mathias T1 - Überrollbeständige DLC-Schichten unter Wälzverschleißbedingungen bis 2 GPa? T2 - Tribologie-Fachtagung 2002 CY - Göttingen, Deutschland DA - 2002-09-23 PY - 2002 SN - 3-00-003404-8 VL - 1 SP - 17-1-17-11 PB - GfT CY - Moers AN - OPUS4-3422 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias A1 - Spaltmann, Dirk A1 - Löhr, Manuel A1 - Effner, Ute ED - Bartz, Wilfried J. T1 - Der Einfluss des E-Moduls und des Grundöls auf das Wälzverhalten von DLC- und Diamantbeschichtungen T2 - 14th International Colloquium Tribology "Tribology and Lubrication Engineering" CY - Stuttgart, Germany DA - 2004-01-13 PY - 2004 SN - 3-924813-54-X VL - 1 SP - 583 EP - 591 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-3423 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Spaltmann, Dirk A1 - Löhr, Manuel A1 - Woydt, Mathias ED - Bartz, Wilfried J. T1 - Gibt es eine Korrelation zwischen der Topographie von DLC-Schichten und ihrem Verhalten unter geschmierter Wälzbeanspruchung? T2 - 14th International Colloquium Tribology "Tribology and Lubrication Engineering" CY - Stuttgart, Deutschland DA - 2004-01-13 PY - 2004 SN - 3-924813-54-X VL - 1 SP - 631 EP - 639 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-3424 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brink, Arne A1 - Wedler, Gerd A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Weritz, Friederike A1 - Wiggenhauser, Herbert T1 - Active infrared thermography in civil engineering - quantitative analysis by numerical simulation N2 - The cooling-down process of building structures after heating-up with an external radiation source was analysed to detect voids inside and below the surface. Quantitative results of concrete test specimen containing voids with different sizes at various depths will be presented here. The experimental results were compared to numerical simulations performed with a Finite Difference program developed at BAM. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 KW - Non-destructive testing in civil engineering KW - Acitve thermography KW - Concrete KW - Voids KW - Numerical SImulation KW - Finite differences PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/p024/p024.htm SN - 3-931381-49-8 SP - 1 EP - 8(?) PB - DGZfP CY - Berlin AN - OPUS4-3403 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Torge, Manfred A1 - Adam, Karin A1 - Müller, Wolfgang T1 - Materialanalysen KW - Kulturguterhaltung KW - Glasanalysen PY - 2004 SN - 3-361-00577-9 SP - 81 EP - 86 PB - Ed. Leipzig CY - Leipzig AN - OPUS4-3459 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Torge, Manfred A1 - Feldmann, Ines A1 - Müller, Wolfgang T1 - Malschichtsicherung auf Wachsbasis KW - Kulturguterhaltung KW - Bienenwachs KW - Carnaubawachs PY - 2004 SN - 3-361-00577-9 SP - 87 EP - 92 PB - Ed. Leipzig CY - Leipzig AN - OPUS4-3460 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias A1 - Skopp, André A1 - Kelling, Norbert A1 - Berger, L.-M. T1 - Thermally sprayed TiO2-x coatings under mixed lubrication and unlubricated sliding conditions T2 - Tribologie-Fachtagung 2004 CY - Göttingen, Deutschland DA - 2004-09-27 KW - Thermisch gespritzte Schichten KW - TiOx KW - Magnéli-Phasen KW - Tribologische Prüftechnik KW - Reibung KW - Verschleiß KW - Kolbenring/Zylinderlaufbahn PY - 2004 SN - 3-00-015053-6 SP - 1(?) EP - 13(?) PB - Ges. für Tribologie CY - Moers AN - OPUS4-4396 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Burkert, Andreas A1 - Fischer, Joachim A1 - Isecke, Bernd ED - Weber, T. T1 - Edelstahl Rostfrei in Kontakt mit anderen Werkstoffen und desinfizierenden Medien T2 - GfKORR-Seminar "Nichtrostende Stähle können rosten? Auf die Randbedingungen kommt es an ..." CY - Frankfurt am Main, Deutschland DA - 2004-09-27 KW - Galvanische Korrosion KW - Bimetallkorrosion KW - Einflussgrößen KW - Abhilfemaßnahmen KW - Desinfektionsmaßnahmen KW - Korrosionspotentiale PY - 2004 SN - 3-935406-15-0 SP - 99 EP - 112 PB - GfKORR CY - Frankfurt am Main AN - OPUS4-4400 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiggenhauser, Herbert A1 - Taffe, Alexander ED - Cziesielski, E. T1 - Zerstörungsfreie Prüfung im Bauwesen - Einleitung PY - 2004 SN - 3-433-01705-0 SP - 309 EP - 310 PB - Ernst CY - Berlin AN - OPUS4-4421 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schallert, Matthias A1 - Krebber, Katerina A1 - Hofmann, Detlef A1 - Habel, Wolfgang A1 - Stahlmann, J. T1 - Auswahl geeigneter Fasersensorprinzipien für Anwendungen in der Geotechnik T2 - Fachseminar "Messen in der Geotechnik 2004" CY - Braunschweig, Deutschland DA - 2004-09-09 PY - 2004 SN - 3-927610-68-2 N1 - Serientitel: Mitteilung des Instituts für Grundbau und Bodenmechanik - Technische Universität Braunschweig – Series title: Mitteilung des Instituts für Grundbau und Bodenmechanik - Technische Universität Braunschweig IS - 77 SP - 309 EP - 328 PB - Inst. für Grundbau und Bodenmechanik, Techn. Univ. CY - Braunschweig AN - OPUS4-4424 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böcker, Wolfgang D. G. ED - Kollenberg, W. T1 - Siliciumcarbid KW - Herstellung KW - Eigenschaften KW - Weltmarkt KW - Struktur KW - Phasenbeziehungen KW - Werkstoffe KW - Produkte und Anwendungen KW - Halbleiterindustrie PY - 2004 SN - 3-8027-2927-7 SP - 231 EP - 249 PB - Vulkan CY - Essen AN - OPUS4-4387 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Paatsch, Wolfgang A1 - Beck, Uwe A1 - Senoner, Mathias T1 - Entwicklung von Referenzmaterialien für die Oberflächentechnik im Mikrometer- und Nanometerbereich T2 - Oberflächentage 2004 ; 42. Jahrestagung. Deutsche Gesellschaft für Galvano- und Oberflächentechnik CY - Dresden, Deutschland DA - 2004-09-22 KW - Laterale Auflösung KW - Nanometrologie KW - Nanotechnologie KW - Oberflächenanalytik KW - Zertifiziertes Referenzmaterial PY - 2004 SN - 3-9806061-2-0 SP - 263 EP - 266 PB - DGO CY - [Hilden] AN - OPUS4-4582 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Redmer, Bernhard A1 - Ewert, Uwe A1 - Rädel, Christoph A1 - Zscherpel, Uwe A1 - Likhatchov, A.V. A1 - Pickalov, V.V. A1 - Neundorf, B. T1 - Mobile 3D-X-Ray Tomography for Analysis of Planar Defects in Welds by "Tomocar" N2 - Tomographical Computer Aided Radiology (TomoCAR) is based on the mechanical position control of an X-ray tube in front of a welding seam and the application of a planar array detector behind it. Several hundred radiometric projections in small angle steps are acquired. The tomographical reconstruction allows the three-dimensional (3D) representation of the defects. A new radiometric array detector system with a small internal unsharpness and high image contrast is used for the 2- and 3-dimensional visualization and sizing of planar defects with a defect opening of less than 100 µm. This detector is based on a CMOS-flat panel with a direct converting CdTe-single crystal layer. The small design allows the application of the mobile testing equipment for mechanized X-ray inspection in industrial plants. The physical pixel size of the detector amounts to 0,1x0,1 mm². Nevertheless, this system yields a better spatial resolution than indirect converting detectors (e.g. cameras with fluorescence layers of Gd2O2S). It allows the reliable detection of planar defects with openings far below the detector pixel size by subpixel resolution. 'TomoCAR' is qualified at present in the context with a German pilot study following to the ENIQ guidelines for the employment within the nuclear power industry. T2 - 16th World Conference on Nondestructive Testing CY - Montreal, Canada DA - 2004-08-30 KW - Digitale Radiologie KW - Radiometrie KW - Laminografie KW - Mobile Anwendungen PY - 2004 SP - 8 pages PB - International Committee for Non-Destructive Testing CY - Montreal AN - OPUS4-4717 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hertwig, Andreas A1 - Martin, Sven A1 - Krüger, Jörg A1 - Spielmann, C. A1 - Lenner, M. A1 - Kautek, Wolfgang ED - Dausinger, F. ED - Lichtner, F. ED - Lubatschowski, H. T1 - Primary hazards and reliability of protective materials N2 - Femtosecond laser pulses are close to industrial use. The advantages of ultrashort laser pulses for micromachining applications especially in the case of dielectric and biological samples down to pulse durations of 5 fs have been established. The current international standards of laser safety are primarily concerned with CW and pulsed lasers down to the nanosecond range. Therefore, human tissue and laser-protection equipment was investigated with respect to its resistance and protection performance for femtosecond laser illumination down to 30 fs. This included filter glasses for laser protection eyewear, polymer and textile materials used in curtains and guards. Bulk absorber filters can provide enough protection against laser radiation, give a sufficiently broad absorption spectrum. Materials are damaged more easily by femtosecond laser radiation. The need for sufficient spectral broadness as well as the different damage thresholds have to be included in international laser safety standards. This work should trigger the development of novel eye-protection devices that are lighter and ergonomically more acceptable than present commercial models. KW - Lasersicherheit KW - Kurzpulslaser KW - Femtosekunden KW - Lasertechnik KW - Materialbearbeitung PY - 2004 SN - 3-540-20114-9 DO - https://doi.org/10.1007/b96440 SN - 0303-4216 N1 - Serientitel: Topics in applied physics – Series title: Topics in applied physics IS - 96 SP - 287 EP - 307 PB - Springer CY - Berlin AN - OPUS4-4661 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Merchel, Silke A1 - Faestermann, T. A1 - Herpers, U. A1 - Knie, K. A1 - Korschinek, G. A1 - Kubik, P. W. T1 - Final destination - Earth PY - 2004 UR - http://www.meteoroids.de/publ_sm.htm SN - 92-0-114703-1 SN - 0074-1876 IS - 1181 SP - I-9-I-14 PB - IAEA CY - Vienna AN - OPUS4-5547 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bartscher, M. A1 - Hilpert, U. A1 - Wäldele, F. A1 - Goebbels, Jürgen A1 - Weidemann, Gerd T1 - Projekt - Genauigkeitssteigerung von industriellen Röntgen-Computertomografie (CT)-Anlagen für die dimensionelle Messtechnik N2 - Kurzfassung Röntgen-Computertomographie (CT) ist eine industriell eingeführte Technik zur zerstörungsfreien Fehlererkennung. Seit einiger Zeit werden industrielle CT-Anlagen auch zur Geometriebestimmung, d.h. für dimensionelle Messungen eingesetzt. Bei diesen Messungen treten Messabweichungen auf, die wegen komplexer Einflussgrößen derzeit nur schlecht quantifiziert werden können. Die Größe der beobachteten Messabweichungen erschwert zum Teil noch die weitere Anwendung der CT als Messtechnik. Das momentan mit CT messbare Teilespektrum wird bei dickwandigen Bauteilen durch die fehlende Verfügbarkeit von Röntgendetektoren für hohe Energien (speziell Flächendetektoren) beschränkt. Im folgenden wird ein Forschungsprojekt zwischen 10 deutschen Industrieunternehmen und Instituten und zwei deutschen Bundesanstalten (Physikalisch-Technische Bundesanstalt (PTB) und Bundesanstalt für Materialforschung und -prüfung) vorgestellt, dass die Weiterentwicklung der CT als dimensionelle Messtechnik zur Aufgabe hat. Das Projekt hat eine Laufzeit von drei Jahren (Start 01.Okt. 2003). Es werden hier die Projektziele und erste Ergebnisse vorgestellt. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 KW - Dimensionelles Messen KW - Computertomographie KW - Soll-Ist Vergleich von Geometrien PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/p17/p17.htm SN - 3-931381-55-2 SP - 1(?) EP - 9(?) PB - DGZfP CY - Berlin AN - OPUS4-5601 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wendrich, Astrid A1 - Maierhofer, Christiane A1 - Hamann, M. A1 - Hennen, Ch. A1 - Knupfer, B. A1 - Marchisio, M. A1 - da Porto, F. A1 - Binda, L. A1 - Zanzi, L. ED - Venzmer, H. T1 - Zerstörungsfreie Struktur- und Feuchteuntersuchungen im Alten Museum in Berlin im Rahmen des EU-Projektes ONSITEFOR-MASONRY T2 - 15. Hanseatische Sanierungstage 2004 - Fassadeninstandsetzung CY - Rostock, Deutschland DA - 2004-11-12 KW - Zerstörungsfreie Untersuchung KW - Altes Museum KW - Radar KW - Ultraschall KW - Seismik KW - Geoelektrik KW - Flat Jack PY - 2004 SN - 3-345-00876-9 SP - 10 Seiten PB - Huss-Medien CY - Berlin AN - OPUS4-5602 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kohl, Christoph A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Wöstmann, Jens A1 - Wiggenhauser, Herbert T1 - Datenfusion komplementärer Impuls-Echo Verfahren zur zerstörungsfreien Untersuchung von Betonbauteilen T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Radar KW - Ultraschall KW - Impact-Echo KW - Datenfusion KW - SAFT PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/p37/p37.htm SN - 3-931381-55-2 SP - 1 EP - 15(?) PB - DGZfP CY - Berlin AN - OPUS4-5603 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rühe, S. A1 - Dilz, K. A1 - Thomas, Hans-Martin A1 - Zösch, A. T1 - Untersuchungen an lasergeschweißten Blechverbindungen mit Wirbelstrom T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 KW - Wirbelstrom KW - Laserschweißnaht KW - Karosserieteile PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/p27/p27.htm SN - 3-931381-55-2 SP - 1(?) EP - 2(?) PB - DGZfP CY - Berlin AN - OPUS4-5487 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sickert, Roland A1 - Knöppchen, Andreas T1 - Mit Funkenerosion zum kalibrierten ZfP-Testfehler T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 KW - Funkenerosion KW - Referenzfehler KW - ZfP PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/p50/p50.htm SN - 3-931381-55-2 SP - 1(?) EP - 4(?) PB - DGZfP CY - Berlin AN - OPUS4-5488 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ledworuski, Siegmar A1 - Klingelhöffer, Hellmuth A1 - Brookes, Stephen-Peter A1 - May, Thomas ED - Pohl, M. T1 - Untersuchungen zum automatisierten Zugversuch für die Weiterentwicklung der Norm EN 10002-1 im Rahmen des Europäischen Forschungsprojektes TENSTAND T2 - Werkstoffprüfung - Konstruktion, Qualitätssicherung und Schadensanalyse CY - Neu-Ulm, Deutschland DA - 2004-11-24 KW - Zugversuch KW - TENSTAND KW - Dehngeschwindigkeit KW - Geschwindigkeitseinfluß KW - EN 10002-1 PY - 2004 SN - 3-88355-337-9 SP - 73 EP - 78 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-5608 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kind, Thomas A1 - Maierhofer, Christiane ED - Cziesielski, E. T1 - Das Impulsradarverfahren - ein Verfahren zur zerstörungsfreien Strukturaufklärung in Bauwerken KW - Impuls-Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Fehlstellen KW - Kiesnester KW - Beton KW - Spaltklinker KW - CFK-Laminate KW - Modellierung PY - 2004 SN - 3-433-01705-0 SP - 333 EP - 341 PB - Ernst CY - Berlin AN - OPUS4-5987 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weritz, Friederike A1 - Maierhofer, Christiane ED - Cziesielski, E. T1 - Anwendung der Puls-Phasen-Thermografie zur Untersuchung von Betonbauteilen KW - PPT KW - Impuls-Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Beton KW - Fehlstellen KW - Kiesnester KW - Spaltklinker PY - 2004 SN - 3-433-01705-0 SP - 329 EP - 333 PB - Ernst CY - Berlin AN - OPUS4-5977 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Bernstein, A. A1 - Lehmann, Erhard ED - Degischer, H.-P. T1 - Neue Biokeramiken für den Plasmaspritzprozess T2 - 14. Symposium Verbundwerkstoffe und Werkstoffverbunde CY - Wien, Österreich DA - 2003-07-02 PY - 2003 SN - 3-527-30762-1 SP - 732 EP - 737 PB - Wiley-VCH CY - Weinheim AN - OPUS4-5983 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Appajaiah, Anilkumar A1 - Wachtendorf, Volker ED - Koike, Y. T1 - Aging behavior of polymer optical fibers: Characterization of thermo-oxidative stability by chemiluminescence T2 - 13th International Plastic Optical Fibres Conference 2004 CY - Nuremberg, Germany DA - 2004-09-27 KW - Climatic exposure KW - Chemiluminescence KW - POF PY - 2004 SN - 3-905084-70-8 SP - 166 EP - 173 PB - AKM Congress Service CY - Basel AN - OPUS4-5973 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molnarne, Maria A1 - Schröder, Volkmar T1 - Evaluation of Fire and Explosion Hazards of Gas Mixtures using Explosion Diagrams N2 - An important method to prevent fires and explosions is to avoid explosive fuel-air mixtures. For this purpose the exact knowledge of the explosion range is required as a function of the combustible, oxidizer and inert gas concentrations. Frequently triangular diagrams are used in order to display the explosion range of such three component gas mixtures. Beside the explosion limits and the explosion range other characteristics can be deduced from explosion diagrams. More than 200 of such explosion diagrams are available in the database CHEMSAFE®, included among others. The in-house version of the database is able to provide all characteristics of a chosen system by means of a TRIANGLE-software. Furthermore a recently published German data book contains 158 explosion diagrams. Many diagrams were measured according to the German DIN 51649 standard. Other systems are available for elevated initial pressures and temperatures. This paper describes how to use the TRIANGLE software for flammability diagrams and the meaning and use of derived characteristics (MOC, MXC, MAI) for explosion prevention. Furthermore a calculation method for the flammability of gas mixtures is shown using the MXC values. T2 - 3rd International ESMG Symposium: Process Safety and Industrial Explosion Protection CY - Nuremberg, Germany DA - 2004-03-16 KW - Explosion KW - CHEMSAFE PY - 2004 SN - 3-9807567-3-4 SP - 1(?) EP - 9(?) PB - European Safety Management Group CY - Hamm AN - OPUS4-5540 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin ED - Cziesielski, E. T1 - Ultraschallechoverfahren an Betonbauteilen PY - 2004 SN - 3-433-01705-0 SP - 341 EP - 352 PB - Ernst CY - Berlin AN - OPUS4-5481 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schartel, Bernhard ED - Okamoto, M. T1 - Fire retardancy based on polymer layered silicate nanocomposites KW - Fire retardancy KW - Nanocomposites KW - Cone Calorimeter KW - LOI KW - UL94 KW - Rheology PY - 2004 SN - 4-88231-479-7 SP - 242 EP - 257 PB - CMC Publ. AN - OPUS4-5497 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brandes, E. A1 - Dietlen, Siegmund A1 - Hieronymus, Hartmut A1 - Krause, Ulrich A1 - Plewinsky, Bodo A1 - Redeker, T. A1 - Schröder, Volkmar ED - Hattwig, M. T1 - Safety characteristics of gases and vapors PY - 2004 SN - 3-527-30718-4 SP - 271 EP - 323 PB - Wiley-VCH CY - Weinheim AN - OPUS4-5503 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Karl, Winfried ED - Hattwig, M. T1 - Chemical reactions PY - 2004 SN - 3-527-30718-4 SP - 256 EP - 270 PB - Wiley-VCH CY - Weinheim AN - OPUS4-5504 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Karl, Winfried ED - Steen, H. T1 - Chemische Reaktionen PY - 2000 SN - 3-527-29848-7 SP - 289 EP - 305 PB - Wiley-VCH CY - Weinheim AN - OPUS4-5505 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Adamczyk, Burkart A1 - Simon, Franz-Georg A1 - Kley, Gerd ED - Gaballah, I. T1 - Thermochemical treatment of waste materials T2 - REWAS 2004, Global Symposium on Recycling, Waste Treatment and Clean Technology CY - Madrid, Spain DA - 2004-09-26 PY - 2004 SN - 84-95520-04-4 SP - 2245 EP - 2252 PB - Minerals, Metals and Materials Society CY - Warrendale AN - OPUS4-5679 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hübert, Thomas A1 - Oertel, B. A1 - Heinze, D. ED - Kunzmann, H. T1 - Kapazitive Sensorsysteme zur Ermittlung prozeßnaher Größen (Temperatur und Feuchte) T2 - Abschlußkolloquium CY - Braunschweig, Deutschland DA - 1994-04-13 PY - 1994 SN - 3-89429-454-X SN - 0179-0609 N1 - Serientitel: PTB-Bericht: PTB-F – Series title: PTB-Bericht: PTB-F IS - 12 SP - 1 EP - 11 CY - Braunschweig AN - OPUS4-5681 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Karl, Winfried T1 - New regulations for the transport of dangerous goods in Europe - The revision of class 2 PY - 1996 SN - 2-85701-281-0 SP - 11-1-11-14 AN - OPUS4-5890 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Karl, Winfried ED - Chaaban, A. T1 - New Transport Regulations in Europe - The Revision of Class 2 - Gases T2 - 8th International Conference on Pressure Vessel Technology (ICPVT-8) CY - Montreal, Canada DA - 1996-07-21 PY - 1996 SN - 0-7918-1789-X VL - 2 SP - 415 EP - 420 PB - American Society of Mechanical Engineers CY - New York, NY AN - OPUS4-5893 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gaal, Mate A1 - Bär, Sylke A1 - Müller, Christina A1 - Rosenthal, Martina A1 - Bloodworth, T. A1 - Lewis, A. A1 - Guelle, D. ED - Harmon, R. S. T1 - Optimizing detector trials for humanitarian demining T2 - Conference 2004 CY - Orlando, FL, USA DA - 2004-04-12 KW - Zuverlässigkeit der Minensuche KW - Feldtests KW - Modulares Modell KW - Metalldetektor PY - 2004 SN - 0-8194-5338-2 DO - https://doi.org/10.1117/12.541124 SN - 1605-7422 N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 5415 SP - 1323 EP - 1334 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-6045 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Christina A1 - Elagin, Mstislav A1 - Gaal, Mate A1 - Rosenthal, Martina A1 - Ewert, Uwe A1 - Osterloh, Kurt A1 - Wilrich, Peter-Th. T1 - Determination of reliability in demining and NDT N2 - The detection of defects in aircraft components or parts of a power plant or mines in the ground is connected with the task to distinguish between signals caused be the item searched for and noisy signals from other sources. The reliability of the system is the better the better the system is in detecting the wanted signal and avoiding false alarms caused by noise. It is usual to measure the reliability of diagnostic systems in terms of ROC-curves (Re-ceiver Operating Characteristics) and POD-curves (Probability of Detec-tion). The ROC curves describe the POD versus Probability of False Alarm with growing system sensitivity along the curve. POD curves describe the Probability of Detection for a fixed sensitivity for a variation of item sizes or depths. Reliability of the whole system is always a composition of the physics and technique, application influences and the human factors. For the scien-tific understanding and possibilities of improvement, decomposition accord-ing to a modular model is helpful. The authors present their experiences with the reliability evaluation of metal detectors for humanitarian demining and an NDT system of mechanized ultrasonic phased array testing of copper welds. The special concern in demining is the influence of soil types, detec-tors and the experiences of human beings. T2 - MATEST 2004 CY - Zagreb, Croatia DA - 2004-10-14 KW - Flaw Detection KW - Mine Detection KW - Prohability of Detection KW - Receiver Operating Characteristics KW - Metal Detector Test Trials PY - 2004 SN - 953-96225-9-X N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. SP - 183 EP - 201 AN - OPUS4-6047 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Subaric-Leitis, Andreas A1 - Seiffert, Bernhard T1 - Meßunsicherheitsbewertung von Druck-/Zugprüfmaschinen gemäß Richtlinie des VMPA-AK "Prüfmaschinen" T2 - VDI-Fachtagung "`Messunsicherheit praxisgerecht bestimmen" CY - Oberhof, Deutschland DA - 2004-11-30 KW - Meßunsicherheit KW - Druckprüfmaschinen KW - Zugprüfmaschinen PY - 2004 SN - 3-18-091867-5 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1867 SP - 149 EP - 155 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-6040 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bonse, Jörn A1 - Baudach, Steffen A1 - Krüger, Jörg A1 - Kautek, Wolfgang ED - Exarhos, G. T1 - Femtosecond laser damage in dielectric coatings N2 - Multi-shot investigations of Ti:sapphire laser (wavelength (lambda) approximately equals 800 nm) induced damage were performed in three different laboratories (BAM, Berlin; LZH, Hannover; UNM, Albuquerque). The ablation behavior of a high reflecting mirror consisting of alternating (lambda) /4- layers of Ta2O5 and SiO2 was studied. Fused silica served as substrate. The influence of the pulse duration ((tau) equals 13 - 130 fs), the pulse number (30 - (infinity) ) and the repetition rate (10 Hz - 100 MHz) on the damage threshold will be discussed. T2 - 32nd Annual Boulder Damage Symposium CY - Boulder, CO, USA DA - 2000-10-16 PY - 2001 SN - 0-8194-4036-1 DO - https://doi.org/10.1117/12.425056 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 4347 SP - 24 EP - 34 PB - International Society for Optical Engineering (SPIE) CY - Bellingham, Wash. AN - OPUS4-6013 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weritz, Friederike A1 - Wilsch, Gerd ED - Cziesielski, E. T1 - Einsatz der Laser-Induzierten Breakdown Spektroskopie (LIBS) zur Bestimmung des Chloridgehaltes in Beton KW - LIBS KW - Spektroskopie KW - Chlorid-Bestimmung KW - Beton KW - Tiefenprofil PY - 2004 SN - 3-433-01705-0 SP - 393 EP - 397 PB - Ernst CY - Berlin AN - OPUS4-6065 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilsch, Gerd A1 - Weritz, Friederike ED - Cziesielski, E. T1 - Anwendung der Laser-Induzierten Breakdown Spektroskopie (LIBS) im Bauwesen KW - LIBS KW - Spektroskopie KW - Beton KW - Zementanalyse PY - 2004 SN - 3-433-01705-0 SP - 386 EP - 393 PB - Ernst CY - Berlin AN - OPUS4-6066 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kautek, Wolfgang A1 - Pentzien, Simone A1 - Rudolph, Pascale A1 - Krüger, Jörg A1 - Maywald-Pitellos, C. A1 - Bansa, H. A1 - Grösswang, H. A1 - König, W. ED - Fotakis, C. T1 - Near-Ultraviolet Pulsed Laser Interaction with Contaminants and Pigments on Parchment: Spectroscopic Diagnostics for Laser Cleaning Safety T2 - 5th International Conference on Optics within Life Sciences CY - H¯erakleion, Greece DA - 1998-01-01 PY - 2000 SN - 3-540-66648-6 N1 - Serientitel: Optics within life sciences – Series title: Optics within life sciences IS - 5 SP - 100 EP - 107 PB - Springer CY - Berlin AN - OPUS4-6189 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wendrich, Astrid A1 - Maierhofer, Christiane A1 - Kuritz, Matthias A1 - Köpp, Christian A1 - Kalisch, U. T1 - Konzeption, Aufbau und Untersuchung eines Mauerwerksprobekörpers T2 - Feuchtetag 2004 ; Workshop Onsiteformasonry 2004 CY - Berlin, BAM, Deutschland DA - 2004-11-18 KW - Historisches Mauerwerk KW - Probekörper KW - Zerstörungsfreie Prüfung im Bauwesen KW - Radar PY - 2004 SN - 3-931381-59-5 N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 91-CD SP - 107 EP - 116 PB - DGZfP CY - Berlin AN - OPUS4-6345 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian ED - Zarka, J. ED - Ohtmer, O. T1 - Micromechanical Investigation of Fiber Reinforced Materials by Finite Element Analysis T2 - Struceng and Femcad CY - Grenoble, France DA - 1990-10-17 KW - Fiber Reinforced Plastic KW - Micromechanics KW - Interface Crack KW - Finite-Element Method KW - Composite Material Model PY - 1991 SN - 2-907669-14-1 SP - 95 EP - 100 CY - Gournay-sur-Marne, France AN - OPUS4-6350 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian A1 - Hampe, Andreas ED - Zarka, J. ED - Ohtmer, O. T1 - Finite Element Analysis of the Single Fiber Pull-Out Test T2 - Struceng and Femcad CY - Grenoble, France DA - 1990-10-17 KW - Composite Materials KW - Fiber Reinforced Plastics KW - Single Fiber Pull-Out Test KW - Interfacial Shear Stress KW - Finite-Element Method PY - 1991 SN - 2-907669-14-1 SP - 131 EP - 136 CY - Gournay-sur-Marne, France AN - OPUS4-6351 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Köpp, Christian A1 - Maierhofer, Christiane A1 - Wendrich, Astrid T1 - ONSITEFORMASONRY - Ein Europäisches Projekt - Entwicklung zerstörungsfreier und zerstörungsarmer Prüfverfahren zur Untersuchung und Bewertung historischen Mauerwerks T2 - Feuchtetag 2004 ; Workshop Onsiteformasonry 2004 CY - Berlin, BAM, Deutschland DA - 2004-11-18 KW - Historisches Mauerwerk KW - Zerstörungsfreie Prüfung im Bauwesen KW - Fallstudien KW - Europäische Kommission PY - 2004 SN - 3-931381-59-5 N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 91-CD SP - 245 EP - 255 PB - DGZfP CY - Berlin AN - OPUS4-6344 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Kühn, Gerhard A1 - Unger, Wolfgang A1 - Mix, Renate ED - Radusch, H.-J. ED - Fiedler, L. T1 - Plasma-initiated homo and copolymerisation for modifying polymer surfaces with funtional groups of different type and density T2 - Internationale Fachtagung Polymerwerkstoffe ; P-2002 CY - Halle (Saale), Germany DA - 2002-09-25 PY - 2002 SN - 3-86010-656-2 SP - 534 EP - 539 PB - Martin-Luther-Univ. Halle-Wittenberg CY - Halle (Saale) AN - OPUS4-6969 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hensel, Willi A1 - Krause, Ulrich A1 - Löffler, U. ED - Hattwig, M. T1 - Self-ignition of solid materials (including dusts) PY - 2004 SN - 3-527-30718-4 SP - 227 EP - 255 PB - Wiley-VCH CY - Weinheim AN - OPUS4-6895 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hattwig, Martin A1 - Krause, Ulrich A1 - Proust, C. ED - Hattwig, M. T1 - Explosion Venting PY - 2004 SN - 3-527-30718-4 SP - 493 EP - 530 PB - Wiley-VCH CY - Weinheim AN - OPUS4-6896 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maltsev, Yuri A1 - Mehner, Hartmut A1 - Menzel, Michael A1 - Maslova, Natalija A1 - Rogozev, B. A1 - Kruglov, E. ED - Thomas, M. ED - Williams, J. ED - Gibb, T. T1 - Baseline investigation in transmission Mössbauer spectroscopy using resonance detectors T2 - 26th International Conference on the Applications of the Mössbauer Effect (ICAME 2001) CY - Oxford, England, UK DA - 2001-09-02 KW - Mössbauer spectroscopy KW - Resonance detector KW - Rayleigh scattering of Mössbauer radiation PY - 2003 SN - 1-402-01087-7 SN - 0304-3843 VL - 5 SP - 9 EP - 12 PB - Kluwer Acad. Publ. CY - Dordrecht AN - OPUS4-6930 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ullner, Christian T1 - Die Reihe DIN EN ISO 14577 - Erste weltweit akzeptierte Normen für die instrumentierte Eindringprüfung T2 - DIN-Tagung Härteprüfung CY - Mülheim an der Ruhr, Deutschland DA - 2004-01-27 KW - Eindringprüfung KW - Härte KW - Elastizität KW - Standardisierung PY - 2004 SN - 3-410-15782-4 SP - 71 EP - 91 PB - Beuth CY - Berlin AN - OPUS4-6945 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ullner, Christian ED - Pohl, M. T1 - Die Reihe DIN EN ISO 14577 - Erste weltweit akzeptierte Normen für die instrumentierte Eindringprüfung T2 - Tagungsband Werkstoffprüfung / Tagung Werkstoffprüfung CY - Neu-Ulm DA - 2004-11-25 KW - Härte KW - Eindringverfahren KW - Standardisierung PY - 2004 SN - 3-88355-337-9 SP - 11 EP - 20 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-6947 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ullner, Christian T1 - Messunsicherheitsbewertung in der instrumentierten Eindringprüfung nach ISO 14577 T2 - VDI-Tagung "Messunsicherheit praxisgerecht bestimmen" CY - Oberhof, Deutschland DA - 2004-11-30 KW - Messunsicherheit KW - Härte KW - Elastizitätsmodul KW - Eindringverfahren PY - 2004 SN - 3-18-091867-5 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1867 SP - 141 EP - 148 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-6948 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Grytsenko, K. A1 - Grynko, D. A1 - Lozovski, V. A1 - Friedrich, Jörg Florian A1 - Schulze, Rolf-Dieter A1 - Jurga, J. A1 - Convertino, A. A1 - Kotko, A. ED - Jurga, J. T1 - Properties of Au nano-clusters in PTFE film prepared by co-evaporation in a vacuum PY - 2004 SN - 83-7143-232-1 SP - 79 EP - 84 PB - Wydawn. Politechniki Pozna´nskiej CY - Poznan AN - OPUS4-6961 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Banach, Ulrich A1 - Hübert, Thomas ED - Baselt, J. P. T1 - Kalibrierung von Halbleiter-Gassensoren T2 - 4. Dresdner Sensor-Symposium CY - Dresden, Deutschland DA - 1999-12-06 PY - 1999 SN - 3-933592-72-0 N1 - Serientitel: Dresdner Beiträge zur Sensorik – Series title: Dresdner Beiträge zur Sensorik IS - 12-4 SP - 103 EP - 106 PB - w.e.b.-Univ.-Verl. CY - Dresden AN - OPUS4-7030 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hübert, Thomas A1 - Mosel, Günter T1 - Structure and properties of zinc vanadate glasses T2 - 19th International Congress on Glas (ICG) CY - Edinburgh, Scotland, UK DA - 2001-07-01 PY - 2001 SN - 0-900682-35-3 VL - 2 SP - 27 EP - 28 PB - Soc. of Glass Technology CY - Sheffield AN - OPUS4-7031 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Friedrich, Jörg Florian A1 - Koprinarov, Ivaylo A1 - Weiss, K. A1 - Wöll, Ch. ED - Mittal, K. T1 - The Application of Near Edge X-ray Absorption Fine Structures (NEXAFS) Spectroscopy and X-ray Photoelectron Spectroscopy (XPS) in Surface Analysis of Chromium-evaporated Polymers and Organic Films PY - 1998 SN - 90-6764-290-8 SP - 147 EP - 168 PB - VSP CY - Utrecht AN - OPUS4-6986 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, P. A1 - Friedrich, Jörg Florian ED - Mennig, G. T1 - Modifizierung von Polymeren im Niederdruckplasma T2 - 15. Fachtagung über Verarbeitung und Anwendung von Polymeren CY - Chemnitz, Deutschland DA - 1997-11-13 PY - 1997 SN - 3-00-001942-1 IS - B27 SP - 1 EP - 8 PB - Techn. Univ. CY - Chemnitz AN - OPUS4-6992 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Unger, Wolfgang ED - Worsfold, P. ED - Townshend, A. ED - Poole, C. T1 - Auger electron spectroscopy KW - AES KW - Auger Electron Spectroscopy KW - Oberflächenanalytik PY - 2005 SN - 0-12-764108-4 VL - 8 SP - 466 EP - 474 PB - Elsevier/Acad. Press CY - Amsterdam ET - 2. AN - OPUS4-7015 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Kühn, Gerhard A1 - Mix, Renate ED - D'Agostino, R. T1 - Polymer Surface Modification with Monofunctional Groups of Different Type and Density T2 - 16th International Symposium on Plasma Chemistry ; ISPC-16 CY - Taormina, Italy DA - 2003-06-22 PY - 2005 SN - 3-527-40487-2 SP - 3 EP - 21 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-7019 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Unger, Wolfgang A1 - Gross, Thomas ED - Rivière, J. C. ED - Myhra, S. T1 - Catalyst characterization PY - 1998 SN - 0-8247-0080-5 SP - 747 EP - 780 PB - Dekker CY - New York AN - OPUS4-7020 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Wigant, L. A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Wittrich, H. A1 - Prescher, D. ED - Mittal, K. L. T1 - Barrier properties of plasma-modified polypropylene and polyethyleneterephthalate T2 - International Symposium on Polymer Surface Modification: Relevance to Adhesion CY - Las Vegas, NV, USA DA - 1993-11-03 KW - Plasma fluorination of polymers KW - Deposition of fluorine-containing plasma polymers KW - Barrier formation against solvent permeation KW - Permeation mechanism of solvent mixtures PY - 1996 SN - 90-6764-201-0 VL - 1 SP - 121 EP - 136 PB - VSP CY - Utrecht AN - OPUS4-7006 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Gross, Thomas A1 - Rohrer, P. A1 - Saur, W. A1 - Erdmann, J. A1 - Gorsler, H.-V. ED - Mittal, K. L. T1 - The improvement in adhesion of polyurethane-polypropylene composites by short-time exposure of polypropylene to low and atmospheric pressure plasmas KW - Polyurethane-polypropylene adhesion KW - Low pressure plasma pretreatment KW - Atmospheric pressure plasma treatment KW - Short-time exposure KW - Relevance of functional groups to adhesion KW - Molecular orientation at polymer surfaces PY - 1996 SN - 90-6764-201-0 SP - 49 EP - 72 PB - VSP CY - Utrecht AN - OPUS4-7007 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maultzsch, Matthias ED - Bagda, E. T1 - Witterungseinflüsse auf das Verhalten tausalzbelasteter Betonoberflächen PY - 1985 SN - 3-924813-06-X SP - 14.1 EP - 14.8 PB - Techn. Akad. Esslingen CY - Esslingen AN - OPUS4-7048 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maultzsch, Matthias ED - Rossmanith, H.-P. T1 - Influences of chloride solutions on concrete structures T2 - 2nd International Conference on Structural Failure, Product Liability and Technical Insurance CY - Vienna, Austria DA - 1986-07-01 PY - 1987 SN - 0-907776-12-4 IS - 2 SP - 670 EP - 675 PB - Inderscience Enterprises Ltd CY - Geneva AN - OPUS4-7050 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maultzsch, Matthias ED - Staynes, B. T1 - Properties of PCC for repair of concrete structures T2 - 5th International Congress on Polymers in Concrete (ICPIC) CY - Brighton, England, UK DA - 1987-09-22 PY - 1987 SN - 0-904167-33-X SP - 281 EP - 285 PB - Brighton Polytechnic CY - Brighton AN - OPUS4-7053 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sievert, Rainer A1 - Hamann, Andreas A1 - Noack, Hans-Dieter A1 - Löwe, Peter A1 - Singh, Kai A1 - Künecke, Georgia ED - Tönhoff, K. T1 - Simulation der Spansegmentierung einer Nickelbasislegierung unter Berücksichtigung thermischer Entfestigung und duktiler Schädigung KW - Hochgeschwindigkeitsbeanspruchung KW - Viskoplastisches Deformationsverhalten KW - Thermische Entfestigung KW - Duktile Schädigung PY - 2005 SN - 3-527-31256-0 SP - 446 EP - 469 PB - Wiley-VCH CY - Weinheim AN - OPUS4-7306 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Koprinarov, Ivaylo A1 - Friedrich, Jörg Florian A1 - Lippitz, Andreas A1 - Unger, Wolfgang ED - Olefjord, I. ED - Nyborg, L. ED - Briggs, D. T1 - X-ray Absorption Spectroscopy (NEXAFS) of PET Surfaces T2 - 7th European Conference on Applications of Surface and Interface Analysis CY - Göteborg, Sweden DA - 1997-06-16 PY - 1997 SN - 0-471-97827-2 SP - 755 EP - 759 PB - Wiley CY - Chichester AN - OPUS4-7288 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hensel, Willi A1 - Krause, Ulrich A1 - Löffler, U. ED - Steen, H. T1 - Selbstentzündung fester Stoffe (einschließlich Stäube) PY - 2000 SN - 3-527-29848-7 SP - 257 EP - 289 PB - Wiley-VCH CY - Weinheim AN - OPUS4-6892 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brandes, E. A1 - Dietlen, Siegmund A1 - Hieronymus, Hartmut A1 - Krause, Ulrich A1 - Plewinsky, Bodo A1 - Redeker, T. A1 - Schröder, Volkmar ED - Steen, H. T1 - Eigenschaften reaktionsfähiger Gase und Dämpfe von Flüssigkeiten (Kenngrößen) PY - 2000 SN - 3-527-29848-7 SP - 319 EP - 375 PB - Wiley-VCH CY - Weinheim AN - OPUS4-6893 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hattwig, Martin A1 - Krause, Ulrich A1 - Proust, C. ED - Steen, H. T1 - Explosionsdruckentlastung PY - 2000 SN - 3-527-29848-7 SP - 577 EP - 618 PB - Wiley-VCH CY - Weinheim AN - OPUS4-6894 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian A1 - Hampe, Andreas T1 - Micromechanics of the interface in polymer composites capabilities and limitations of the common test methods T2 - 10th International Conference on Composite Materials CY - Quebec, Canada DA - 1995-05-08 PY - 1995 SN - 1-566-76313-4 VL - 6 SP - 517 EP - 524 PB - Technomic Publ. CY - Lancaster, Pa. AN - OPUS4-6825 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian A1 - Qiao, Linan ED - Bader, M. T1 - Determination of the interfacial toughness using micromechanical tests T2 - 7th European Conference on Composite Materials (ECCM-7) CY - London, England, UK DA - 1996-05-14 PY - 1996 SN - 1-85573-304-8 SP - 17 EP - 22 PB - Woodhead Publishing Ltd CY - Cambridge AN - OPUS4-6826 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian A1 - Hampe, Andreas ED - Scott, M. T1 - Fracture Mechanical Analysis of Pull-out and Fragmentation Tests T2 - 11th International Conference on Composite Materials CY - Gold Coast, Queensland, Australia DA - 1997-07-14 PY - 1997 SN - 1-85573-350-1 SP - V863 EP - V872 PB - Woodhead CY - Cambridge AN - OPUS4-6828 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian ED - Rossmanith, H.-P. T1 - Analysis of singularities and interfacial crack propagation in micromechanical tests T2 - 1st International Conference on Damage and Failure of Interfaces (DFI 1) CY - Vienna, Austria DA - 1997-09-22 PY - 1997 SN - 90-5410-899-1 SP - 365 EP - 372 PB - Balkema CY - Rotterdam AN - OPUS4-6829 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hampe, Andreas A1 - Marotzke, Christian ED - Brockmann, W. T1 - Messung der Scherfestigkeit in der Grenzfläche zwischen Polymer und Glas durch Einzelfaserexperimente T2 - 3. Symposiums der DGM CY - Konstanz DA - 1990-06-21 PY - 1989 SN - 3-88355-166-X PB - DGM Informationsges. CY - Oberursel AN - OPUS4-6806 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian A1 - Qiao, Linan ED - Visconti, I. T1 - Fracture Mechanical Analysis of Fragmentation Pull-Out Tests T2 - 8th European Conference on Composite Materials (ECCM-8) CY - Naples, Italy DA - 1998-06-03 PY - 1998 SN - 1-85573-377-3 VL - 4 SP - 443 EP - 450 PB - Woodhead Publishing Ltd CY - Cambridge AN - OPUS4-6807 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian A1 - Hampe, Andreas A1 - Qiao, Linan T1 - Influence of the Interface Strenght on Local Failure Processes in Fiber Reinforced Composites T2 - 12th International Conference on Composite Materials ; 12th ICCM Europe CY - Paris, France DA - 1999-07-05 KW - Interface crack KW - Energy release rate KW - Fracture mechanics KW - Debonding KW - Thermal stresses KW - Friction KW - Finite element method KW - FEM PY - 1999 SN - 2-9514526-2-4 IS - 423 CY - Paris AN - OPUS4-6809 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian ED - Verpoest, I. ED - Jones, F. R. T1 - Determination of the stress field in the single fibre pull-out test with the aid of the finite element method T2 - 2nd International Conference "Interfacial Phenomena in Composite Materials" CY - Leuven, Belgium DA - 1991-09-17 PY - 1991 SN - 0-7506-0356-9 SP - 69 EP - 72 PB - Butterworth-Heinemann CY - Oxford AN - OPUS4-6816 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian ED - Naslain, R. ED - Lamon, J. ED - Doumeingts, D. T1 - Problems of the Determination of the Interface Strength with the Aid of the Single Fiber Pull-out Test T2 - 6th European Conference on Composite Materials ; 1st International Conference on High Temperature Ceramic Matrix Composites (HT-CMC1) CY - Bordeaux, France DA - 1993-09-20 PY - 1993 SN - 1-85573-143-6 SP - 281 EP - 286 PB - Woodhead CY - Cambridge AN - OPUS4-6819 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian ED - Hogg, P. ED - Schulte, K. T1 - A critical evaluation of micromechanical interface test methods T2 - 2nd European Conference on Composites Testing and Standardisation (ECCM-CTS) ; 2nd International Conference on Composites Testing and Standardization CY - Hamburg, Germany DA - 1994-09-13 PY - 1994 SN - 1-85573-187-8 SP - 75 EP - 83 PB - Woodhead Publ. CY - Abington, Cambridge AN - OPUS4-6822 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gruska, B. A1 - Wandel, K. A1 - Procop, Mathias ED - Lengeler, B. T1 - The InGaAs/SiO2 interface investigated by angle resolved XPS and ellipsometry T2 - 4th International Conference on the Formation of Semiconductor Interfaces (ICFSI) CY - Jülich, Germany DA - 1993-06-14 PY - 1993 SN - 981-021559-2 VL - 4 SP - 373 EP - 376 PB - World Scientific CY - Singapore AN - OPUS4-7088 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Epishin, Alexander A1 - Brückner, Udo A1 - Link, T. A1 - Portella, Pedro Dolabella ED - Dias, A. T1 - Investigation of stresses in superalloys by analysis of y/y'-Microstructure T2 - 6th European Conference on Residual Stresses CY - Coimbra, Portugal DA - 2002-07-10 KW - Superalloys KW - Stress KW - Misfit KW - Rafting PY - 2002 SN - 0-87849-900-8 SN - 0255-5476 N1 - Serientitel: Materials science forum – Series title: Materials science forum IS - 404/407 SP - 287 EP - 292 PB - Trans Tech Publ. CY - Uetikon-Zuerich AN - OPUS4-7147 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Epishin, Alexander A1 - Link, T. ED - Green, K. T1 - Mechanisms of high temperature creep of nickel-base superalloys under low applied stress T2 - Superalloys 2004 / 10th International Symposium on Superalloys 2004 CY - Seven Springs, PA, USA DA - 2004-09-19 KW - Superalloys KW - Creep KW - Porosity KW - Dislocations KW - Diffusion PY - 2004 SN - 0-87339-576-X SP - 137 EP - 143 PB - TMS CY - Warrendale AN - OPUS4-7149 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brückner, Udo A1 - Epishin, Alexander A1 - Link, T. A1 - Portella, Pedro Dolabella ED - Böttger, A. T1 - Creep induced evolution of internal stresses and structure in a single crystal nickel-base superalloy N2 - Changes in the structure of single-crystal (SC) superalloy SRR99 during creep at 980 °C and 200 MPa were investigated. Geometrical parameters of the y/y'-microstructure, y/y'-misfit, stresses in the phases and local misorientation of the structure were determined at defined points of the dendritic structure by use of X-ray diffraction (XRD), wavelength dispersive X-ray spectroscopy (WDXS), scanning (SEM) and transmission (TEM) electron microscopy. Correlation of the microstructural period and local misorientation of the structure with creep strain were found. T2 - 5th European Conference on Residual Stresses CY - Delft-Noordwijkerhout, the Netherlands DA - 1999-10-28 KW - Creep KW - Dendrite KW - Misfit KW - Segregation KW - Superalloys PY - 2000 UR - http://cat.inist.fr/?aModele=afficheN&cpsidt=1381837 SN - 0-87849-855-9 SN - 0255-5476 N1 - Serientitel: Materials science forum – Series title: Materials science forum IS - 347/349 SP - 363 EP - 367 PB - Trans Tech Publ. CY - Uetikon-Zürich AN - OPUS4-7151 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maultzsch, Matthias A1 - Günther, Karl ED - Setzer, M. ED - Auberg, R. T1 - Temperature shock test for the determination of freeze/thaw resistance of concrete T2 - International RILEM Workshop on Resistance of Concrete to Freezing and Thawing with or without De-icing Chemicals CY - Essen, Germany DA - 1997-09-22 PY - 1997 SN - 0-419-22900-0 N1 - Serientitel: RILEM proceedings – Series title: RILEM proceedings IS - 34 SP - 314 EP - 320 PB - E. & F. N. Spon CY - London AN - OPUS4-7117 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maultzsch, Matthias A1 - Hoffmann, Dirk T1 - Effects of short curing on the performance of PCC T2 - 9th International Congress on Polymers in Concretes CY - Bologna, Italy DA - 1998-09-15 PY - 1998 SN - 88-87462-00-3 VL - 9 SP - 509 EP - 514 PB - Casma CY - Bologna AN - OPUS4-7118 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maultzsch, Matthias A1 - Mellmann, Günter ED - Dhir, R. ED - Henderson, N. ED - Limbachiya, M. T1 - Properties of large-scale processed building rubble with respect to the reuse as aggregate in concrete T2 - International Symposium CY - London, England, UK DA - 1998-11-11 PY - 1998 SN - 0-7277-2726-5 SP - 99 EP - 107 PB - Thomas Telford CY - London AN - OPUS4-7119 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maultzsch, Matthias ED - Seidler, P. T1 - Einfluß der Nachbehandlung auf die Eigenschaften polymermodifizierter Betone und Estriche N2 - Referat: Aus der Erfahrung mit konventionellen Betonen und Estrichen wird üblicherweise abgeleitet, daß auch für kunststoffmodifizierte Zementmörtel und Betone (PCC) eine möglichst lange Nachbehandlung durch feuchtigkeitshaltende Maßnahmen erforderlich ist. Schon aus früheren Untersuchungen gab es jedoch Hinweise, daß für werkgemischte PCC, die vor allem für den Einsatz in Schichten von wenigen Zentimetern Dicke konzipiert sind, dies nicht generell gilt. So steht beispielsweise der positiv zu wertenden Entwicklung eines dichteren Gefüges eine langsamere Entwicklung der Biegezug- und Zugfestigkeit gegenüber. Daher erschienen systematische Untersuchungen des Einflusses der Nachbehandlungsdauer auf bestimmte Eigenschaften erforderlich. Für die Praxis sind vor allem die Ausbildung von Oberflächenrissen, der Haftverbund zum Untergrund sowie die Carbonatisierung und Dichtigkeit von maßgebender Bedeutung. Diesen Fragen wurde gezielt in einem vom Bundesministerium für Verkehr geförderten Forschungsvorhaben nachgegangen. Diese Ergebnisse werden ergänzt mit weiteren Erkenntnissen aus Prüfung und Forschung. T2 - 4. Internationales Kolloquium Industrieböden ; 4th International Colloquium Industrial Floors CY - Ostfildern, Deutschland DA - 1999-01-12 PY - 1999 UR - http://www.baufachinformation.de/aufsatz.jsp?ul=98109014880 SN - 3-924813-40-X VL - 1 SP - 351 EP - 356 PB - Technische Akademie Esslingen CY - Ostfildern AN - OPUS4-7120 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maultzsch, Matthias A1 - Mellmann, Günter A1 - Winkler, Helmut ED - Barrage, A. T1 - The substitution of natural aggregates by processed building rubble for high grade concrete T2 - 4th Congress: Recovery, Recycling, Re-Integration ; 4th R' World Congress CY - Geneva, Switzerland DA - 1999-02-02 PY - 1999 SN - 3-905555-18-2 VL - 3 SP - 199 EP - 204 PB - EMPA CY - St. Gallen AN - OPUS4-7121 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mellmann, Günter A1 - Meinhold, Uwe A1 - Maultzsch, Matthias ED - Dhir, R. ED - Jappy, T. T1 - Processed concrete rubble for the reuse as aggregates T2 - International Seminar Exploiting Wastes in Concrete (International Congress Creating with Concrete) CY - Dundee, Scotland, UK DA - 1999-09-07 PY - 1999 SN - 0-7277-2821-0 SP - 171 EP - 178 PB - Thomas Telford CY - London AN - OPUS4-7122 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kipphardt, Heinrich T1 - Traceability in Isotopic Measurements PY - 2004 SN - 044451114-8 VL - I SP - 928 EP - 943 PB - Elsevier CY - Den Haag AN - OPUS4-7156 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maultzsch, Matthias A1 - Günther, Karl ED - Wittmann, F. ED - Gerdes, A. T1 - Wirksamkeit von Oberflächenschutz für Beton nach Freibewitterung T2 - 5. Internationales WTA-Kolloquium Werkstoffwissenschaften und Bauinstandssetzen ; 5th International WTA-Colloquium on Materials Science and Restoration (MSR) CY - Esslingen, Deutschland DA - 1999-11-30 PY - 1999 SN - 3-931681-35-1 VL - 1 SP - 803 EP - 812 PB - Aedificatio Publishers CY - Freiburg AN - OPUS4-7158 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hoffmann, Dirk A1 - Maultzsch, Matthias ED - Wittmann, F. ED - Gerdes, A. T1 - Einfluß von Hydrophobierungen auf die Carbonatisierung von Beton T2 - 5. Internationales WTA-Kolloquium Werkstoffwissenschaften und Bauinstandssetzen ; 5th International WTA-Colloquium on Materials Science and Restoration (MSR) CY - Esslingen, Deutschland DA - 1999-11-30 PY - 1999 SN - 3-931681-35-1 VL - 1 SP - 783 EP - 791 PB - Aedificatio Publishers CY - Freiburg AN - OPUS4-7159 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maultzsch, Matthias ED - Paturoev, V. ED - Serych, R. T1 - Early shrinkage of polymer modified cement mortar (PCC) T2 - 7th International Congress on Polymers in Concrete (ICPIC) CY - Moscow, Russia DA - 1992-09-22 PY - 1992 VL - 7 SP - 730 EP - 737 PB - Science Business Contact International CY - Moscow AN - OPUS4-7101 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Plewinsky, Bodo A1 - Hieronymus, Hartmut ED - Hattwig, M. T1 - Heterogeneous Systems Consisting of Organic Liquids and Oxygen KW - Detonation pressure KW - Detonation velocity KW - Detonation range KW - Run-up time PY - 2004 SN - 3-527-30718-4 SP - 445 EP - 480 PB - Wiley-VCH CY - Weinheim AN - OPUS4-7078 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maultzsch, Matthias ED - Wierig, H.-J. T1 - New methods for the determination of consistency and workability parameters T2 - Colloquium on the Properties of Fresh Concrete CY - Hannover, Germany DA - 1990-10-03 PY - 1990 SN - 0-412-37430-7 N1 - Serientitel: RILEM proceedings – Series title: RILEM proceedings IS - 10 SP - 187 EP - 194 PB - Chapman and Hall CY - London AN - OPUS4-7079 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maultzsch, Matthias ED - Huang, Y.-Y. T1 - Consistence and workability of polymer modified cement concrete and mortar (PCC) T2 - 6th International Congress on Polymers in Concrete (ICPIC) CY - Shanghai, China DA - 1990-09-24 PY - 1990 SN - 7-8000-3113-6 VL - 6 SP - 812 EP - 817 PB - International Academic Publ. CY - Beijing AN - OPUS4-7080 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maultzsch, Matthias A1 - Dimic, D. A1 - Suput, J. ED - Kolar, Drago T1 - Effects of admixtures on the sulphate resistance of concrete T2 - 1st Slovene German Seminar on Joint Projects in Materials Science and Technology CY - Portoroz, Slovenia DA - 1995-10-02 PY - 1995 SN - 3-89336-155-3 SP - 225 EP - 230 CY - Jülich AN - OPUS4-7109 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Suput, J. A1 - Maultzsch, Matthias A1 - Dimic, D. ED - Kolar, Drago T1 - The effect of added polymers and cement type on the durability of mortar used for concrete repair T2 - 1st Slovene German Seminar on Joint Projects in Materials Science and Technology CY - Portoroz, Slovenia DA - 1994-10-02 PY - 1995 SN - 3-89336-155-3 SP - 231 EP - 234 CY - Jülich AN - OPUS4-7110 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maultzsch, Matthias ED - Seidler, P. T1 - Eignungsprüfungen an polymermodifizierten Betonen T2 - Industriefußböden '95 : internationales Kolloquium CY - Esslingen, Deutschland DA - 1995-01-10 PY - 1995 SN - 3-924813-32-9 SP - 275 EP - 280 CY - Ostfildern AN - OPUS4-7111 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maultzsch, Matthias ED - van Gemert, D. T1 - Investigations on PCC repairs with respect to durability T2 - VIIIth International Congress on Polymers in Concrete CY - Oostende, Belgium DA - 1995-07-03 PY - 1995 SN - 90-5204-027-3 SP - 263 EP - 268 CY - Oostende AN - OPUS4-7112 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Heumann, K. G. A1 - Marx, G. A1 - Rädlinger, G. A1 - Vogl, Jochen ED - Frimmel, F. H. T1 - Heavy Metal and Halogen Interactions with Fractions of Refractory Organic Substances Separated by Size-exclusion Chromatography PY - 2002 SN - 3-527-30173-9 SP - 55 EP - 72 PB - Wiley-VCH CY - Weinheim AN - OPUS4-7223 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Heumann, K. G. A1 - Abbt-Braun, G. A1 - Behrens, K. A1 - Burba, P. A1 - Frimmel, F. H. A1 - Jakubowski, B. A1 - Knöchel, A. A1 - Mielcke, J. A1 - Rädlinger, G. A1 - Marx, G. A1 - Vogl, Jochen ED - Frimmel, F. H. T1 - Element determination and its quality control in fractions of refractory organic substances and the corresponding original water samples PY - 2002 SN - 3-527-30173-9 DO - https://doi.org/10.1002/9783527611195.ch1b SP - 39 EP - 53 PB - Wiley-VCH CY - Weinheim AN - OPUS4-7224 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jann, Oliver A1 - Wilke, Olaf A1 - Brödner, Doris ED - Woods, J. ED - Grimsrud, D. ED - Boschi, N. T1 - Procedure for the determination and limitation of VOC-emissions from furnitures and coated wood based products T2 - Healthy Buildings/IAQ '97 ; ASHRAE Annual IAQ Conference ; 5th ISIAQ International Conference on Healthy Buildings CY - Bethesda, MD, USA DA - 1997-09-27 PY - 1997 SN - 0-929900-25-1 VL - 3 SP - 593 EP - 598 CY - Washington, DC AN - OPUS4-7237 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molnarne, Maria A1 - Kollár-Hunek, K. T1 - Robbanási határgörbék fordulópont körüli közelítése különbözö típusú éghetögáz-inersgáz-oxidátor elegyeknél - Approximation of the explosion limit curves around the apex for different mixtures containing flammable/inert/oxidizing gases N2 - The paper discusses a new method to approximate the sometimes missing apex point of the explosion limit curves of flammable substances with diluents in air. The base of the new method is to vary the frame points of the co-monotonic Splines using the de Casteljau algorithm. We show several examples for flammable/inert/oxidizing gas containing systems - selected by the program TRIANGLE - where the method was applied. Due to the definition of the frame Splines it can be stated that the new method never restricts the explosion range around the apex and shifts the explosion limit curve into the direction of higher inert gas concentrations. This means that the new method can correct the highly "cut down nose" of the co-monotonic Splines and gives a more safer explosion range of these systems. T2 - Days of Chemical Engineering´05 CY - Veszprém, Hungary DA - 2005-04-25 KW - CHEMSAFE KW - Explosionsdiagramm KW - Spline-Interpolation KW - TRIANGLE Programm PY - 2005 SN - 963-9495-71-9 SP - 71 EP - 73 CY - Veszprem AN - OPUS4-7412 LA - hun AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schartel, Bernhard A1 - Bartholmai, Matthias A1 - Braun, Ulrike ED - Le Bras, M. T1 - Barrier effects for the fire retardancy of polymers T2 - 9th European Meeting on Fire Retardancy and Protection of Materials CY - Lille, France DA - 2003-09-15 KW - Fire retardancy KW - Nanocomposites KW - Red Phosphorus KW - Mg(OH)2 KW - Cone Calorimeter KW - LOI PY - 2005 SN - 0-85404-582-1 VL - 9 SP - 264 EP - 275 PB - Royal Society of Chemistry CY - Cambridge AN - OPUS4-7377 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krebber, Katerina A1 - Habel, Wolfgang A1 - Gutmann, Toivo A1 - Schram, C. T1 - Fiber Bragg grating sensors for monitoring of wind turbine blades N2 - Fiber Bragg grating sensor arrays can be used to monitor the mechanical behavior of rotor blades of wind turbines. In order to investigate how stable and reliably work such sensors, different fiber Bragg gratings were embedded into textile-reinforced composite. Long-term temperature and tensile (fatigue) tests have been carried out with composite structure specimens. This paper reports on selected results of the tests and discusses important reliability aspects with regard to the fiber design and the fiber material. T2 - 17th International Conference on Optical Fibre Sensors CY - Bruges, Belgium DA - 2005-05-23 KW - Fiber Bragg grating sensors KW - Rotor blades KW - Wind turbines KW - Strain monitoring PY - 2005 SN - 0-8194-5855-4 VL - 5855 IS - Part 2/2 SP - 1036 EP - 1039 PB - SPIE CY - Bellingham AN - OPUS4-7490 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Ludwig, S. A1 - Meggyes, Tamás A1 - Stewart, D. A1 - Roehl, K. ED - Roehl, K. T1 - Regulatory and economic aspects KW - Groundwater remediation KW - Permeable Reactive Barrier KW - Long-term Performance KW - Elemental Iron KW - Hydroxyapatite PY - 2005 SN - 0-444-51536-4 N1 - Serientitel: Trace metals and other contaminates in the environment – Series title: Trace metals and other contaminates in the environment IS - 7 SP - 311 EP - 321 PB - Elsevier CY - Amsterdam AN - OPUS4-7546 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Senoner, Mathias A1 - Wirth, Thomas A1 - Unger, Wolfgang A1 - Österle, Werner A1 - Kaiander, I. A1 - Sellin, R. L. A1 - Bimberg, D. ED - Wilkening, G. ED - Koenders, L. T1 - Testing the Lateral Resolution in the Nanometre Range with a New Type of Certified Reference Material T2 - NanoScale 2004 Seminar ; 6th Seminar on Quantitative Microscopy ; 2nd Seminar on Nanoscale Calibration Standards and Methods CY - Braunschweig, Germany DA - 2004-03-25 KW - Laterale Auflösung KW - Nanometrologie KW - Nanotechnologie KW - Oberflächenanalytik KW - Zertifiziertes Referenzmaterial PY - 2004 SN - 3-527-40502-X DO - https://doi.org/10.1002/3527606661.ch21 SP - 282 EP - 294 PB - Wiley-VCH CY - Weinheim AN - OPUS4-7541 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Roehl, K.E. A1 - Czurda, K. A1 - Meggyes, Tamás A1 - Simon, Franz-Georg A1 - Stewart, D.I. ED - Roehl, K. T1 - Permeable reactive barriers KW - Groundwater remediation KW - Permeable Reactive Barrier KW - Long-term Performance KW - Elemental Iron KW - Hydroxyapatite PY - 2005 SN - 0-444-51536-4 N1 - Serientitel: Trace metals and other contaminates in the environment – Series title: Trace metals and other contaminates in the environment IS - 7 SP - 1 EP - 25 PB - Elsevier CY - Amsterdam AN - OPUS4-7542 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meggyes, Tamás ED - Roehl, K. T1 - Construction methods of permeable reactive barriers KW - Groundwater remediation KW - Permeable Reactive Barrier KW - Long-term Performance KW - Elemental Iron KW - Hydroxyapatite PY - 2005 SN - 0-444-51536-4 N1 - Serientitel: Trace metals and other contaminates in the environment – Series title: Trace metals and other contaminates in the environment IS - 7 SP - 27 EP - 52 PB - Elsevier CY - Amsterdam AN - OPUS4-7543 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Biermann, Vera ED - Roehl, K. T1 - Behaviour of uranium in elemental iron and hydroxyapatite reactive barriers: column experiments KW - Groundwater remediation KW - Permeable Reactive Barrier KW - Long-term Performance KW - Elemental Iron KW - Hydroxyapatite PY - 2005 SN - 0-444-51536-4 N1 - Serientitel: Trace metals and other contaminates in the environment – Series title: Trace metals and other contaminates in the environment IS - 7 SP - 77 EP - 109 PB - Elsevier CY - Amsterdam AN - OPUS4-7544 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böhm, J. A1 - Debreczeni, Á. A1 - Gombkötö, I. A1 - Simon, Franz-Georg A1 - Csövári, M. ED - Roehl, K. T1 - Laboratory tests using natural groundwater KW - Groundwater remediation KW - Permeable Reactive Barrier KW - Long-term Performance KW - Elemental Iron KW - Hydroxyapatite PY - 2005 SN - 0-444-51536-4 N1 - Serientitel: Trace metals and other contaminates in the environment – Series title: Trace metals and other contaminates in the environment IS - 7 SP - 111 EP - 136 PB - Elsevier CY - Amsterdam AN - OPUS4-7545 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lüders, Günter A1 - Seeger, Stefan ED - Holzlöhner, U. ED - August, H. ED - Meggyes, T. T1 - Geotextile protective layer systems for geomembranes PY - 1997 SN - 0-7277-2590-4 SP - 77 EP - 83 PB - Thomas Telford Publishing CY - London AN - OPUS4-7577 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Seeger, Stefan A1 - Müller, Werner ED - de Groot, M. T1 - Limits of stress and strain: Design criteria for protective layers for geomembranes in landfill liner systems T2 - 1st European Geosynthetics Conference (EUROGEO 1) CY - Maastricht, The Netherlands DA - 1996-09-30 PY - 1996 SN - 90-5410-836-3 SP - 153 EP - 157 PB - Balkema CY - Rotterdam AN - OPUS4-7575 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bauer, Gisela A1 - Österle, Werner A1 - Cavalcanti-Pinto, H. ED - Mücklich, F. T1 - REM-Untersuchung des Oxidschichtwachstums auf der einkristallinen Nickelbasis-Superlegierung SRR 99 T2 - 34. Metallographie-Tagung CY - Saarbrücken, Deutschland DA - 2000-09-13 PY - 2001 SN - 3-88355-296-8 N1 - Serientitel: Sonderbände der praktischen Metallographie – Series title: Sonderbände der praktischen Metallographie VL - 32 SP - 293 EP - 297 PB - Mat Info, Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-7640 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gesatzke, Wolfgang A1 - Österle, Werner A1 - Rooch, Heidemarie A1 - Urban, Ingrid ED - Portella, Pedro Dolabella T1 - Präparation von Mikro-Querschnitten mit dem fokussierten Ionenstrahl (FIB) T2 - 37. Metallographie-Tagung CY - Berlin, Deutschland DA - 2003-09-17 PY - 2004 SN - 3-88355-322-0 SN - 0343-3579 N1 - Serientitel: Sonderbände der praktischen Metallographie – Series title: Sonderbände der praktischen Metallographie IS - 35 SP - 145 EP - 149 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-7641 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Oder, Gabriele A1 - Österle, Werner ED - Portella, Pedro Dolabella T1 - Anwendungsbeispiele für die Elektronenstrahl-Mikrosonde T2 - 37. Metallographie-Tagung CY - Berlin, Deutschland DA - 2003-09-17 PY - 2004 SN - 3-88355-322-0 SN - 0343-3579 N1 - Serientitel: Sonderbände der praktischen Metallographie – Series title: Sonderbände der praktischen Metallographie IS - 35 SP - 141 EP - 144 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-7690 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gersonde, Martin ED - Becker, G. T1 - Untersuchungen über den Einfluß von Holzart, Grundschutzbehandlung und Nachschutzmittel auf die Eindringgeschwindigkeit von Nachschutzsalzen in den Mast PY - 1958 SN - 0417-2000 N1 - Serientitel: Mitteilungen der Deutschen Gesellschaft für Holzforschung – Series title: Mitteilungen der Deutschen Gesellschaft für Holzforschung IS - 42 SP - 10 EP - 18 PB - Dt. Gesellschaft f. Holzforschung CY - Stuttgart AN - OPUS4-7756 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Günther A1 - Gersonde, Martin ED - Becker, G. T1 - Quantitative Untersuchungen über das Eindringen von Fluorid aus Modellbandagen in Holzmaste PY - 1958 SN - 0417-2000 N1 - Serientitel: Mitteilungen der Deutschen Gesellschaft für Holzforschung – Series title: Mitteilungen der Deutschen Gesellschaft für Holzforschung IS - 42 SP - 34 EP - 44 PB - Dt. Gesellschaft f. Holzforschung CY - Stuttgart AN - OPUS4-7757 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gersonde, Martin A1 - Becker, Günther ED - Becker, G. T1 - Untersuchungen über das Eindringen von Fluorid aus Handelsbandagen in Holzmaste PY - 1958 SN - 0417-2000 N1 - Serientitel: Mitteilungen der Deutschen Gesellschaft für Holzforschung – Series title: Mitteilungen der Deutschen Gesellschaft für Holzforschung IS - 42 SP - 44 EP - 53 PB - Dt. Gesellschaft f. Holzforschung CY - Stuttgart AN - OPUS4-7758 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Günther A1 - Starfinger, Käthe ED - Becker, Günther T1 - Modellversuche im Laboratorium über das Eindringen von Fluorid aus Nachschutzmitteln in Holzmaste verschiedener Beschaffenheit PY - 1958 SN - 0417-2000 N1 - Serientitel: Mitteilungen der Deutschen Gesellschaft für Holzforschung – Series title: Mitteilungen der Deutschen Gesellschaft für Holzforschung IS - 42 SP - 53 EP - 62 PB - Dt. Gesellschaft f. Holzforschung CY - Stuttgart AN - OPUS4-7760 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Günther A1 - Zycha, Herbert ED - Becker, G. T1 - Zusammenfassende Auswertung von Untersuchungsergebnissen über den Nachschutz von Holzmasten mit Salzen PY - 1958 SN - 0417-2000 N1 - Serientitel: Mitteilungen der Deutschen Gesellschaft für Holzforschung – Series title: Mitteilungen der Deutschen Gesellschaft für Holzforschung IS - 42 SP - 72 EP - 75 PB - Dt. Gesellschaft f. Holzforschung CY - Stuttgart AN - OPUS4-7761 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Zehr, Joachim T1 - Eigenschaften brennbarer Nutzstäube - Gefahren - Kennzahlen - Sicherheitsmaßnahmen T2 - Jahrestagung Nutzstäube CY - Hamburg, Deutschland DA - 1957-04-25 PY - 1958 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 26 SP - 43 EP - 46 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-7787 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Günther A1 - Zycha, Herbert ED - Becker, Günther T1 - Plan und Durchführung grundlegender Untersuchungen über den Nachschutz von Holzmasten PY - 1958 SN - 0417-2000 N1 - Serientitel: Mitteilungen der Deutschen Gesellschaft für Holzforschung – Series title: Mitteilungen der Deutschen Gesellschaft für Holzforschung IS - 42 SP - 5 EP - 10 PB - Dt. Gesellschaft f. Holzforschung CY - Stuttgart AN - OPUS4-7755 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kohler, A. A1 - Feucht, W. T1 - Systematische Härtemeßfehler bei Einbettungsmängeln der Rockwell-C-Diamant-Eindringkörper T2 - VDI-Tagung Härtemessung CY - Dortmund, Deutschland DA - 1959-09-23 PY - 1961 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 41 SP - 99 EP - 104 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-10171 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Scheruhn, Willi ED - Stauch, A. ED - Rögnitz, H. T1 - Geräte zur Gasbeschaffung PY - 1964 VL - 2 SP - 524 EP - 529 PB - Ernst CY - Berlin ET - 6 AN - OPUS4-10360 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schönherr, Wolfgang T1 - Sprödigkeits- und Festigkeitsuntersuchungen an Baustählen - Hinweise aus dem Werkstoffverhalten für die Bestimmung der Stahlgütegruppen und für die Schweißkonstruktion T2 - Grosse Schweisstechnische Tagung CY - Wiesbaden, Deutschland DA - 1964-09-23 PY - 1965 SN - 0427-8682 N1 - Serientitel: Fachbuchreihe Schweißtechnik – Series title: Fachbuchreihe Schweißtechnik IS - 40 SP - 138 EP - 145 PB - Deutscher Verl. f. Schweisstechnik (DVS) CY - Düsseldorf AN - OPUS4-10457 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tödt, Fritz T1 - Intermittierende elektrochemische Sauerstoffregistrierung in verunreinigten Gewässern T2 - Achema 1964, 14. Ausstellungstagung für Chemisches Apparatewesen CY - Frankfurt am Main, Deutschland DA - 1964-01-01 PY - 1965 SN - 0070-315x N1 - Serientitel: DECHEMA-Monographien – Series title: DECHEMA-Monographien IS - 54 SP - 305 EP - 310 PB - Verl. Chemie CY - Weinheim, Bergstr. AN - OPUS4-10464 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schulz, Fabian T1 - Richtlinien für die zentrale Versorgung von Betrieben mit technischen Gasen für Schweißen, Schneiden und verwandte Arbeitsverfahren PY - 1965 SN - 0427-8682 N1 - Serientitel: Fachbuchreihe Schweißtechnik – Series title: Fachbuchreihe Schweißtechnik IS - 40 SP - 206 EP - 209 PB - Deutscher Verl. f. Schweisstechnik (DVS) CY - Düsseldorf AN - OPUS4-10442 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Strese, Günther ED - Stauch, A. ED - Rögnitz, H. T1 - Gasversorgung PY - 1965 VL - 3 SP - 105 EP - 114 PB - Ernst CY - Berlin ET - 6 AN - OPUS4-10443 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Elze, Johannes T1 - Makro- und Mikrobeschaffenheit galvanisch aufgebrachter Überzüge T2 - VDI-Tagung CY - Braunschweig, Deutschland DA - 1964-11-25 PY - 1965 SN - 0083-5560 VL - 90 SP - 49 EP - 53 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-10407 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Seekamp, Horst T1 - Brandversuche mit stark bewehrten Stahlbetonsäulen PY - 1959 SN - 0171-7197 N1 - Serientitel: Deutscher Ausschuß für Stahlbeton – Series title: Deutscher Ausschuß für Stahlbeton IS - 132 SP - 1 EP - 17 PB - Beuth CY - Berlin AN - OPUS4-10014 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dannenberg, Johannes A1 - Deutschmann, A1 - Melchior, Paul T1 - Warmzerreißversuche mit Spannstählen und Auswertung von Brandversuchen an vorgespannten und nicht vorgespannten Stahlbetonbauteilen PY - 1957 SN - 0171-7197 N1 - Serientitel: Deutscher Ausschuß für Stahlbeton – Series title: Deutscher Ausschuß für Stahlbeton IS - 122 SP - 11 EP - 35 PB - Ernst CY - Berlin AN - OPUS4-9904 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Seekamp, Horst T1 - Feuerschutz von Holz und Holzkonstruktionen PY - 1957 VL - 27 SP - 95 EP - 100 PB - Franckh CY - Stuttgart AN - OPUS4-9918 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Seekamp, Horst A1 - Möhler, Karl T1 - Feuersicherheit von Hausschornsteinen PY - 1957 VL - 27 SP - 81 EP - 89 PB - Franckh CY - Stuttgart AN - OPUS4-9922 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tödt, Fritz T1 - Über die weitere Entwicklung und Anwendung der elektrochemischen Sauerstoffmessung T2 - Europäisches Treffens für Chemische Technik anlässlich der Achema-Tagung und des 2. Kongresses der Europäischen Föderation für Chemie-Ingenieur-Wesen CY - Frankfurt am Main, Deutschland DA - 1958-01-01 PY - 1959 SN - 0070-315x N1 - Serientitel: DECHEMA-Monographien – Series title: DECHEMA-Monographien IS - 35 SP - 132 EP - 141 PB - Verl. Chemie CY - Weinheim, Bergstr. AN - OPUS4-10062 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Teske, Günter T1 - Problem der Sauerstoffspurenmessung in Gasen mit Hilfe des elektrochemischen Konzentrationsmessverfahrens T2 - Europäisches Treffens für Chemische Technik anlässlich der Achema-Tagung und des 2. Kongresses der Europäischen Föderation für Chemie-Ingenieur-Wesen CY - Frankfurt am Main, Deutschland DA - 1958-01-01 PY - 1959 SN - 0070-315x N1 - Serientitel: DECHEMA-Monographien – Series title: DECHEMA-Monographien IS - 35 SP - 142 EP - 153 PB - Verl. Chemie CY - Weinheim, Bergstr. AN - OPUS4-10064 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Cremer, L. A1 - Schneider, Patrick ED - Meyer-Ehlers, G. T1 - Bauakustische Aufgaben, Lösungen und Ergebnisse PY - 1961 SN - 0409-1108 N1 - Serientitel: Berichte aus der Bauforschung – Series title: Berichte aus der Bauforschung IS - 17 SP - 56 EP - 74 PB - Ernst [in Komm.] CY - Berlin AN - OPUS4-10097 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiederholt, Wilhelm ED - Steudel, H. T1 - Korrosion und Korrosionsschutz PY - 1960 IS - II B8 SP - 1 EP - 10 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-10078 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kaesche, Helmut T1 - Die Hemmung der Säurekorrosion von Eisen durch Adsorptionsinhibitoren T2 - DECHEMA-Jahrestagung CY - Frankfurt am Main, Deutschland DA - 1960-01-01 PY - 1961 SN - 0070-315X N1 - Serientitel: DECHEMA-Monographien – Series title: DECHEMA-Monographien IS - 39 SP - 55 EP - 79 PB - Verl. Chemie CY - Weinheim, Bergstr. AN - OPUS4-10083 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mendrzyk, Hildegard T1 - Die Bestimmung des Trockengehaltes von Kammgarnen durch Austrocknen im Heißluftstrom PY - 1961 VL - 10 CY - Aachen ET - 10. AN - OPUS4-10125 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rühl, Karl H. ED - Koch, H. T1 - Einfluß des Spannungszustandes und der Temperatur auf die Sprödbruchgefahr PY - 1961 SN - 0427-8682 N1 - Serientitel: Fachbuchreihe Schweißtechnik – Series title: Fachbuchreihe Schweißtechnik IS - 19 SP - 544 EP - 549 PB - Dt. Verl. f. Schweißtechnik CY - Düsseldorf AN - OPUS4-10087 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Caemmerer, Winfrid ED - Meyer-Ehlers, G. T1 - Wärmetechnische Untersuchungen an Fensterelementen PY - 1961 SN - 0409-1108 N1 - Serientitel: Berichte aus der Bauforschung – Series title: Berichte aus der Bauforschung IS - 17 SP - 100 EP - 111 PB - Ernst [in Komm.] CY - Berlin AN - OPUS4-10093 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tödt, Fritz T1 - Weitere Fortschritte bei elektrochemischen Sauerstoffmessungen T2 - Achema 1961, 13. Ausstellungstagung für Chemisches Apparatewesen CY - Frankfurt am Main, Deutschland DA - 1961-01-01 PY - 1962 SN - 0070-315x N1 - Serientitel: DECHEMA-Monographien – Series title: DECHEMA-Monographien IS - 43 SP - 197 EP - 202 PB - Verl. Chemie CY - Weinheim, Bergstr. AN - OPUS4-10234 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Treumann, Hartwig T1 - Explosive Stoffe PY - 1967 SN - 3-433-00497-8 SP - 1251 EP - 1259 PB - Ernst CY - Berlin ET - 4., neubearb. AN - OPUS4-10586 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schönherr, Wolfgang T1 - Temperaturen beim Brennschneiden von Stahl T2 - Große Schweißtechnische Tagung CY - Essen, Deutschland DA - 1965-09-29 PY - 1966 SN - 0427-8682 N1 - Serientitel: Fachbuchreihe Schweißtechnik – Series title: Fachbuchreihe Schweißtechnik IS - 46 SP - 105 EP - 108 PB - Dt. Verl. für Schweißtechnik (DVS) CY - Düsseldorf AN - OPUS4-10528 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schönhals, Andreas ED - Grellmann, W. ED - Seidler, S. T1 - Elektrische und dielektrische Eigenschaften KW - Elektrische Eigenschaften KW - Dielektrische Eigenschaften KW - Kunststoffe PY - 2005 SN - 3-446-22086-0 SP - 352 EP - 395 PB - Hanser CY - München AN - OPUS4-10530 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rohrbach, Christof T1 - Möglichkeiten der elektrischen Druckmessung T2 - VDI-Tagung CY - Essen, Deutschland DA - 1965-03-29 PY - 1966 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 93 SP - 5 EP - 8 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-10541 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czaika, Norbert T1 - Dynamischens Eichen von Druckgebern T2 - VDI-Tagung CY - Essen, Deutschland DA - 1965-03-29 PY - 1966 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 93 SP - 91 EP - 94 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-10542 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Steinbeck, G. A1 - Bleck, W. A1 - Bork, Claus-Peter A1 - Engl, B. A1 - Evertz, Th. A1 - Frehn, A. A1 - Hatscher, A. A1 - Hinterdorfer, J. A1 - Kaufmann, H. A1 - Masendorf, R. A1 - Nicklas, D. A1 - Sonne, H.-M. A1 - Sonsino, C. M. A1 - Zenner, H. ED - Zenner, H. T1 - Eigenschaften und Berechnungskennwerte von Karosseriestählen T2 - DVM-Tag 2005 CY - Berlin, Deutschland DA - 2005-04-27 KW - Feinblech KW - Kennwerte KW - FE-Simulation KW - Automobilindustrie PY - 2005 SN - 0946-5987 N1 - Serientitel: DVM Bericht – Series title: DVM Bericht IS - 672 SP - 133 EP - 146 PB - DVM CY - Düsseldorf AN - OPUS4-10652 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reiche, I. A1 - Merchel, Silke A1 - Ketelsen, T. A1 - Simon, O. ED - Ketelsen, T. T1 - Alc ixh xan - Zum zeichnerischen Kalkül Jan van Eycks T2 - Ausstellung "Das Geheimnis des Jan van Eyck. Die Frühen Niederländischen Zeichnungen und Gemälde in Dresden" CY - Dresden, Deutschland DA - 2005-08-13 KW - X-ray spectrometry KW - XRF KW - Röntgenfluoreszenzanalyse KW - RFA KW - Silverpoint drawing KW - Silberstiftzeichnung PY - 2005 SN - 3-422-06566-0 SP - 8 EP - 13 PB - Dt. Kunstverl. CY - München AN - OPUS4-10655 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfender, Max ED - Schnarz, R. T1 - Die Problematik der Identität von Verstand und Vernunft in Wissenschaft, Technik und Wirtschaft N2 - Der grausige Aspekt auf die Not der Menschheit — zwei Drittel haben nicht, was sie brauchen —, vielfache politische und technische Abenteuerlust und zur Verschwendung neigende Wirtschaftsformen der reichen Länder, das kaum mehr kaschierte Ringen um die Vorherrschaft der Welt mit einem unvorstellbaren propagandistischen und militärischen Aufwand bewegen die ganze Menschheit. Voranstürmendes und auf das Besondere gerichtetes Drängen, abhängig von der weiterhelfenden Bestätigung durch den raschen Erfolg, und die Sorge, im blinden Fortschrittsglauben möglicherweise grundsätzlich zu irren, sicher aber für die Menschheit Dringlicheres und Wichtigeres zu versäumen, bestimmen den Gegensatz der Meinungen. In diesem Sinne sei das Thema Wissenschaft, Technik und Wirtschaft als Problem des Verstandes und zugleich der Vernunft vorgestellt. Erlauben Sie mir mit Ihrer Aufmerksamkeit und Geduld den Versuch, diesen Sinn zu erkunden und den Weg zum Verständnis zu ebnen. Dafür brauchen wir allerdings den Willen zur Definition, die Beharrlichkeit der Logik und den Mut der Folgerung. T2 - Tagung des AWF und seiner Arbeitsgemeinschaften anläßlich seines 50jährigen Bestehens CY - Berlin, Germany DA - 13.05.1968 PY - 1969 N1 - Der Beitrag wurde gleichlautend veröffentlicht in der Zeitschrift "Humanismus und Technik" (1969), Bd. 13, H. 2, S. 15-24. SP - 5 EP - 18 PB - Haufe CY - Freiburg i. Br. AN - OPUS4-10710 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ladeburg, H. ED - Abel, H. T1 - Untersuchung und Konservierung der Eisenteile der Bremer Kogge PY - 1969 IS - 8 SP - 157 EP - 168 PB - Röver CY - Bremen AN - OPUS4-10735 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Koch, Frank A1 - Ballheimer, Viktor A1 - Zeisler, Peter T1 - Berechnung und Bewertung hochbelasteter Schrauben in Deckel- und Tragzapfensystemen von Transportbehältern für radioaktive Stoffe T2 - Schraubenverbindungen : Berechnung, Gestaltung, Anwendung CY - Dresden, Deutschland DA - 2005-10-05 KW - Transportbehälter KW - Radioaktiv KW - Deckel KW - Tragzapfen KW - Schrauben KW - FEM PY - 2005 SN - 3-18-091903-5 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1903 SP - 193 EP - 210 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-10826 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Munz, Martin A1 - Chung, Jae Un A1 - Kalinka, Gerhard ED - Possart, W. T1 - Mapping Epoxy Interphases T2 - 7th European Conference on Adhesion ; 7th EURADH CY - Freiberg, Germany DA - 2004-09-01 KW - Interface KW - Interphase KW - Epoxy KW - Copper (Cu) KW - Polyvinylpyrrolidone (PVP) KW - AFM/SFM KW - DSI KW - EDX/EDS KW - Stiffness KW - Modulus KW - Interdiffusion PY - 2005 SN - 3-527-31263-3 VL - 7 SP - 103 EP - 123 PB - Wiley-VCH CY - Weinheim AN - OPUS4-10894 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Mix, Renate A1 - Kühn, Gerhard ED - Possart, W. T1 - Contribution of chemical interactions to the adhesion between evaporated metals and functional groups of different types at polymer surfaces PY - 2005 SN - 3-527-31263-3 SP - 265 PB - Wiley-VCH CY - Weinheim AN - OPUS4-10898 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rohrmann, Rolf A1 - Rücker, Werner ED - Soize, C. ED - Schueller, G. T1 - IMO-WIND: An integrated monitoring system for offshore wind energy turbines N2 - To ensure a high operational reliability of future offshore wind conversion systems (OWEC) with economically acceptable repair and maintenance efforts, comprehensive diagnosis and supervision concepts are required. Automatic monitoring systems will be an essential part of such concepts. Within the scope of the IMO-WIND research project BAM, the University of Siegen and six industrial companies are involved in developing an integrated monitoring system for all components (structure, blades and machinery) of OWEC. This contribution describes the approach and the emphases of the research project. T2 - IMO-WIND: An integrated monitoring system for offshore wind energy turbines CY - Paris, France DA - 2005-09-04 KW - Monitoring KW - Zustandsüberwachung KW - Schadensanalyse KW - Windlasten KW - Dynamik KW - Windenergieanlagen KW - Offshore KW - Bauliche Bewertung PY - 2005 SN - 90-5966-033-1 VL - 1 SP - 287 EP - 292 PB - Millpress CY - Rotterdam AN - OPUS4-10912 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Biermann, Vera A1 - Simon, Franz-Georg A1 - Csövári, M. A1 - Csicsák, J. A1 - Földing, G. A1 - Simoncsics, G. ED - Merkel, B. ED - Hasche-Berger, A. T1 - Long-term performance of reactive materials in PRBs for uranium remediation N2 - Elemental iron (Fe0) and hydroxyapatite (HAP) were evaluated as reactive materials in PRBs for uranium remediation. Laboratory experiments were carried out and a pilot-scale reactive barrier with Fe0 was installed in Pécs (Southern Hungary). Results of 2.5 years of operation are reported. The PRB has a considerable influence on groundwater composition: uranium concentrations decrease from 900 µg/l to <10 µg/l, TDS drop from 1,000 mg/l to 500 mg/l. T2 - 4. Uranium Mining and Hydrogeology Congress CY - Freiberg, Germany DA - 2005-09-11 KW - PRBs KW - Permeable Reaktive Wände KW - Grundwassersanierung KW - Uran PY - 2006 SN - 3-540-28363-3 DO - https://doi.org/10.1007/3-540-28367-6_28 SP - 275 EP - 285 PB - Springer CY - Berlin AN - OPUS4-10886 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühn, Hans-Joachim A1 - Ledworuski, Siegmar ED - Frenz, H. T1 - Der TMF-Versuch - Einfluss der Versuchseinrichtung und der Versuchsführung auf die Ergebnisse N2 - Summary TMF (Thermomechanical-Fatigue) ist ein zyklisches Werkstoffprüfverfahren, das mit der Weiterentwicklung der Hochtemperaturwerkstoffe an Bedeutung gewonnen hat und Grundlage für die Auslegung vieler mechanisch/thermisch beanspruchter Bauteile ist (z.B. Abgasanlagen, Triebwerkskomponenten). Die Probe wird dabei wie beim LCFVersuch (Low-Cycle-Fatigue [1]) mechanisch belastet und zusätzlich einem thermischen Zyklus unterworfen. Der TMF-Versuch unterscheidet sich also von anderen Prüfverfahren hauptsächlich in der Temperaturführung, und es liegt daher nahe, bewährte Prüfeinrichtungen zu modifizieren und für TMF-Untersuchungen einzusetzen. Die veränderte Versuchsführung beeinflusst jedoch das gesamte Prüfsystem. An ausgewählten Beispielen werden die Auswirkungen auf die Prüfergebnisse gezeigt. In den letzten Jahren hat es viele Anstrengungen gegeben, eine TMF-Norm zu erarbeiten (ISO/ASTM [2]), aber bisher existieren nur unvollständige Entwürfe, so dass in Industrie und Forschung eigene Standards entwickelt wurden, die hinsichtlich Probendesign, Equipment, Testprozedur und Toleranzen in erster Linie den eigenen Anforderungen genügten. Eine Vergleichbarkeit der Versuchsergebnisse ist somit nur bedingt möglich, zumal, wie Voruntersuchungen zeigten, die Versuchsführung die Versuchsergebnisse drastisch beeinflussen kann. Wegen der Dringlichkeit der Harmonisierung auf dem Gebiet der TMF-Normung wurden die Aktivitäten durch ein EU-Forschungsprojekt (TMF-STANDARD) beschleunigt. Ziel dieser Untersuchung ist die Festlegung sinnvoller Toleranzen für die Versuchsparameter. Das Ergebnis dieser Arbeit soll später Eingang in eine ISO-TMF-Norm finden. Über die Arbeiten auf diesem Gebiet wird unter 3. Das Verfahren hingewiesen. T2 - 20. Tagung Werkstoffprüfung CY - Bad Nauheim, Deutschland DA - 2002-12-05 PY - 2003 SN - 3-527-30674-9 DO - https://doi.org/10.1002/9783527610310.ch35 SP - 266 EP - 271 PB - Wiley-VCH CY - Weinheim AN - OPUS4-2122 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tressl, R. A1 - Wondrak, G. T. A1 - Kersten, E. A1 - Krüger, Ralph-Peter A1 - Rewicki, D. ED - Shibamoto, T. ED - Terao, J. ED - Osawa, T. T1 - Identification of maillard type polymers with antioxidative activity T2 - 213th National Meeting of the American Chemical Society CY - San Francisco, CA, USA DA - 1997-04-13 PY - 1998 SN - 0-8412-3573-2 SN - 0097-6156 N1 - Serientitel: ACS Symposium Series – Series title: ACS Symposium Series IS - 702 SP - 209 EP - 220 PB - American Chemical Society CY - Washington, DC AN - OPUS4-2160 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tressl, R. A1 - Kersten, E. A1 - Wondrak, G. T. A1 - Rewicki, D. A1 - Krüger, Ralph-Peter ED - O'Brien, J. T1 - Fragmentation of Sugar Skeletons and Formation of Maillard Polymers T2 - 6th International Symposium on the Maillard Reaction CY - London, England, UK DA - 1997-07-27 PY - 1998 SN - 0-85404-733-6 SN - 0260-6291 N1 - Serientitel: Special publication / Royal Society of Chemistry – Series title: Special publication / Royal Society of Chemistry IS - 223 SP - 69 EP - 75 PB - Royal Society of Chemistry CY - Cambridge AN - OPUS4-2161 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Janiak, Ch. A1 - Lange, K.C.H. A1 - Marquardt, P. A1 - Krüger, Ralph-Peter A1 - Hanselmann, R. ED - Sun, J. ED - Janiak, C. T1 - Propene and 1-hexene oligomerization with unbridged alkyl-substituted cyclopentadienyl- and phospholyl-zirconium/MAO catalysts - mechanistic implications from oligomer analyses by NMR, SEC, and MALDI-TOF MS PY - 2001 SP - 117 EP - 142 PB - Chemical Industry Press CY - Bejing AN - OPUS4-2193 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Ralph-Peter A1 - Much, Helmut A1 - Paulus, G. A1 - Resch, M. A1 - Schulz, Günter ED - Darms, R. ED - Suter, U. T1 - Polymer Characterization by MALDI-TOF-MS and Combination with HPLC T2 - 5th European Polymer Federation Symposium on Polymeric Materials (EPF) CY - Basel, Switzerland DA - 1994-10-09 PY - 1994 SN - 3-85739-297-5 SN - 0258-0322 VL - 5 PB - Hüthig & Wepf CY - Zug AN - OPUS4-2200 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kilz, P. A1 - Krüger, Ralph-Peter A1 - Much, Helmut A1 - Schulz, Günter ED - Provder, T. T1 - Two-dimensional chromatography for the deformulation of complex copolymers PY - 1995 SN - 0-8412-3132-X N1 - Serientitel: Advances in chemistry series – Series title: Advances in chemistry series IS - 247 SP - 223 EP - 241 PB - American Chemical Society CY - Washington AN - OPUS4-2185 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Just, Ulrich A1 - Krüger, Ralph-Peter ED - Auner, N. T1 - Investigations of Chemical Heterogeneity in Polydimethylsiloxanes using SFC, HPLC and MALDI-MS T2 - 2. Münchner Silicontage ; 2nd Munich Silicon Days CY - Munich, Germany DA - 1994-01-01 PY - 1996 SN - 3-527-29254-3 SP - 625 EP - 632 PB - VCH CY - Weinheim AN - OPUS4-2186 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Ralph-Peter A1 - Much, Helmut A1 - Schulz, Günter A1 - Rikowski, E. ED - Auner, N. T1 - Synthesis of Polyhedral Hexa-, Octa-, Deca- and Dodeca-Silsesquioxanes, Separation by NP-HPLC, SEC and LAC, Characterization by MALDI-TOF-MS KW - Silsesquioxanes KW - NP-HPLC KW - LAC KW - SEC KW - MALDI-TOF-MS PY - 2000 SN - 3-527-29854-1 SP - 545 ff. PB - Wiley-VCH CY - Weinheim AN - OPUS4-2187 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dörfel, Ilona A1 - Effner, Ute A1 - Glaubitz, Steffen A1 - Österle, Werner A1 - Rudolph, Edith ED - Ziegler, G. T1 - Charakterisierung hochfester ZrO2-Werkstoffe T2 - Werkstoffwoche '96 (WW) CY - Stuttgart, Deutschland DA - 1996-05-28 PY - 1997 SN - 3-88355-234-8 VL - 6 SP - 691 EP - 702 PB - DGM Informationsges. CY - Frankfurt AN - OPUS4-2635 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bauer, Gisela A1 - Frenz, Holger A1 - Österle, Werner A1 - Wedell, Wolfgang ED - Aldinger, F. T1 - Ermüdungsverhalten kugelgestrahlter Proben aus IN 738 LC bei 650°C T2 - Werkstoffwoche '96 (WW) CY - Stuttgart, Deutschland DA - 1996-05-28 PY - 1997 SN - 3-88355-235-6 N1 - Serientitel: Werkstoffwoche '96 Symposium – Series title: Werkstoffwoche '96 Symposium IS - 7 SP - 403 EP - 408 PB - DGM Informationsges. CY - Frankfurt AN - OPUS4-2636 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Portella, Pedro Dolabella A1 - Österle, Werner A1 - Jiao, F. A1 - Ziebs, Josef ED - Aldinger, F. T1 - Mechanisches Verhalten der Legierung 800H unter zyklischer zweiachsiger Beanspruchung T2 - Werkstoffwoche '96 (WW) CY - Stuttgart, Deutschland DA - 1996-05-28 PY - 1997 SN - 3-88355-235-6 N1 - Serientitel: Werkstoffwoche '96 Symposium – Series title: Werkstoffwoche '96 Symposium IS - 7 SP - 361 EP - 366 PB - DGM Informationsges. CY - Frankfurt AN - OPUS4-2637 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hentschel, Manfred P. A1 - Lange, Axel A1 - Harbich, Karl-Wolfram A1 - Schors, Jörg A1 - Wald, Oliver ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - X-Ray Diffraction and Refraction Topography of Light Weight Materials T2 - 11th International Symposium on Nondestructive Characterization of Materials CY - Berlin, Germany DA - 2002-06-24 PY - 2003 SN - 3-540-40154-7 SP - 157 EP - 166 PB - Springer CY - Berlin AN - OPUS4-2639 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fischer, Joachim A1 - Isecke, Bernd T1 - Korrosionsschäden - Phänomene und Mechanismen, Schäden unter Wärmedämmungen N2 - Die wichtigste Aufgabe von Dämmstoffen in betriebstechnischen Anlagen ist, Energie zu sparen. Oft gewünschte Nebeneffekte sind Brandschutz, Schallschutz und die Erleichterung der Temperatursteuerung in verfahrenstechnischen Prozessen. Betriebstechnische Anlagen sind Produktions- und Verteilungsanlagen im Industriebau und in der Haustechnik, z.B. Apparate, Behälter, Kolonnen, Tanks, Dampferzeuger, Rohrleitungen, Heizungs- und Lüftungs-, Klima-, Kalt- und Warmwasseranlagen. Dämmungen an Gebäuden und Bauwerken, im Schiff- und Fahrzeugbau sollen hier nicht erörtert werden. Je nach Anlagentemperatur unterscheidet man zwischen Wärmedämmung für Betriebstemperaturen über der Umgebungstemperatur und Kältedämmung für Betriebstemperaturen unter der Umgebungstemperatur. Kältedämmungen werden auch an Anlagen durchgeführt, bei denen durch wechselnde Betriebstemperaturen die Taupunkttemperatur der Umgebungsluft zeitweise unterschritten wird. Beide Dämmungen bestehen in betriebstechnischen Anlagen aus Dämmstoff, Stütz- und Tragkonstruktion sowie der Ummantelung. Manchmal wird zusätzlich eine Dmpfbremse vorgesehen, mit deren Hilfe das Eindringen von Feuchtigkeit verhindert werden soll. Das ist vor allem bei Kälteanlagen erforderlich und bei Anlagen deren Temperaturen stark schwanken. T2 - 29. VDI-Jahrestagung "Schadensanalyse" CY - Würzburg, Germany DA - 16.10.2003 PY - 2003 SN - 3-18-091765-2 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1765 SP - 1 EP - 9 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-2643 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bremser, Wolfram ED - Richter, D. ED - Wöger, W. ED - Hässelbarth, W. T1 - Distributed properties in interlaboratory comparisons T2 - 178. PTB-Seminar CY - Braunschweig, Germany DA - 2003-01-01 PY - 2003 SN - 3-89701-966-3 SN - 0942-1785 N1 - Serientitel: PTB-Bericht : IT, Informationstechnik – Series title: PTB-Bericht : IT, Informationstechnik IS - 10 SP - 77 EP - 84 PB - Wirtschaftsverl. NW CY - Bremerhaven AN - OPUS4-2626 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Steinborn, Gabriele A1 - Wäsche, Rolf A1 - Wötting, G. ED - Degischer, H.-P. T1 - Tribologische Untersuchungen an SiC- und Si3N4-basierten Keramiken T2 - 14. Symposium Verbundwerkstoffe und Werkstoffverbunde CY - Wien, Österreich DA - 2003-07-02 PY - 2003 SN - 3-527-30762-1 SP - 545 EP - 550 PB - Wiley-VCH CY - Weinheim AN - OPUS4-2591 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, G. P. A1 - Schönhals, Andreas ED - Simon, G. P. T1 - Dielectric Relaxation and Thermal Stimulated Currents PY - 2003 SN - 0-8412-3818-9 SP - 96 EP - 130 PB - American Chemical Society CY - Washington, DC AN - OPUS4-2615 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Gardei, André A1 - Kohl, Christoph A1 - Wiggenhauser, Herbert ED - Naus, D. J. T1 - Improvement and combination of echo methods for NDT of concrete elements T2 - 2nd International RILEM Workshop on Life Prediction and Aging Management of Concrete Structures CY - Paris, France DA - 2003-05-05 PY - 2003 SN - 2-912143-36-5 IS - 29 SP - 137 EP - 147 PB - RILEM Publications CY - Bagneux AN - OPUS4-2621 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Subaric-Leitis, Andreas A1 - Seiffert, Bernhard A1 - Ullner, Christian T1 - Charakterisierung der Dynamik kraft- bzw. weggeregelter Materialprüfmaschinen T2 - GMA-Kongress 2003 CY - Baden-Baden, Deutschland DA - 2003-06-03 PY - 2003 SN - 3-18-091756-3 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1756 SP - 511 EP - 518 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-2580 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molnarne, Maria A1 - Viczián, G. A1 - Kollárné-Hunek, K. ED - Filka, J. T1 - Informatikai es matematikai eszközök alkalmazása gázelegyek robbanáshatár-méréseinek minösitéséhez (Verwendung von Informatik- und mathematischen Werkzeugen zur Qualifizierung von Messdaten) N2 - Mathematische Methoden wie Interpolation und Extrapolation sollen bei der Auswertung von Messkurven als Screening-Methode verwendet werden, um die sicherheitstechnisch gefährlichen Bereiche kennzeichnen. Ein Vergleich der Ergebnisse werden hier dargestellt, die die Autoren mit Hilfe von verschiedenen kubischen Spline-Methoden erhalten haben. Mehrere Methoden sind in das Programm TRIANGLE der BAM implementiert. Das Programm kann aus den Messdaten, die nicht das gesamte Explosionsbereich beinhalten, erkennen, dass die Auswertung der Daten entweder abbrechen soll oder mit einem eingefügten Punkt ergänzen soll. Diese Arbeiten sind in einer Zusammenarbeit zwischen BAM und der Budapester Technischen und Wirtschaftsuniversität (BUTE) durchgeführt. Das Programm wurde auch so weiterentwickelt, dass ausgehend von den Excell-Tabellen der Messdaten mehrerer Gasgemisch-Systeme ein Word-Dokument als Zusammenfassung erstellt werden kann. T2 - M´´uszaki Kémiai Napok '03 ; Days of Chemical Engineering '03 CY - Veszprém, Hungary DA - 2003-04-08 KW - Computerprogramm KW - Datenbank KW - Dreiecksdiagramm KW - Explosion KW - Explosionsgrenze KW - Gas KW - Sicherheitstechnische Kenngrößen PY - 2003 SN - 963-7172-99-8 SP - 39 EP - 42 CY - Veszprém AN - OPUS4-2581 LA - hun AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Razus, D. A1 - Molnarne, Maria A1 - Fuß, Oliver ED - Pierucci, S. T1 - Evaluation of Limiting Oxygen Concentration of Fuel/Air/Inert Gaseous Mixtures by Means of Calculated Adiabatic Flame Temperatures and Measured Fuel/Air Lower Explosion Limits T2 - 6th Italian Conference on Chemical and Process Engineering (ICheaP-6) CY - Pisa, Italy DA - 2003-06-08 KW - Abschätzmethode KW - Chemische Sicherheitstechnik KW - Sauerstoffgrenzkonzentration KW - Brand- und Explosionsschutz PY - 2003 SN - 88-900775-2-2 VL - 1 IS - 3 SP - 69 EP - 74 PB - AIDIC CY - Milano AN - OPUS4-2583 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lohrer, Christian A1 - Schmidt, Martin A1 - Krause, Ulrich ED - Bradley, D. ED - Drysdale, D. ED - Molkov, V. T1 - Smouldering Fires of Dusts at Reduced Ambient Oxygen - Experiments and Modelling T2 - 4th International Seminar on Fire and Explosion Hazards CY - Londonderry, Northern Ireland, UK DA - 2003-09-08 PY - 2004 SN - 1-85923-186-1 VL - 4 PB - FireSERT, University of Ulster CY - Newtonabbey AN - OPUS4-2605 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Streicher, Doreen A1 - Müller, W. T1 - Ultrasonic Imaging of Concrete Elements - State of the Art Using 2D Synthetic Aperture N2 - Since several years ultrasonic imaging techniques are used for testing concrete elements. Combined with a reconstruction calculation they lead to an acoustic imaging of scatterers and reflectors from the inside of the concrete element. For several testing problems it is an advantage to use a two dimensional synthetic aperture and to combine it with a three-dimensional reconstruction calculation (3D-SAFT, Synthetic Aperture Focussing Technique). This enables the analysis of the tested volume by means of B-scans in two directions and C-scans (projections parallel to the surface), respectively. Using the 2D-scanning technique, especially the disturbing influence of the reinforcing rebars can be minimised. In this contribution the state of the art of this method is demonstrated and analysed. Examples of the application are presented, concerning Localisation of honeycombing and compaction faults Characterisation of cracks (especially measuring the crack depth) Investigation of tendon ducts The results presented are obtained in the frame of a research initiative Non-destructive Evaluation of Concrete Structures Using Acoustic and Electromagnetic Echo-Methods supported by the German Science Council (FOR 384 of DFG, Deutsche Forschungsgemeinschaft). The methods are assessed and improved in cooperation with the partners participating in the project. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/v051/v051.htm SN - 3-931381-49-8 PB - DGZfP CY - Berlin AN - OPUS4-2606 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gradt, Thomas A1 - Hübner, Wolfgang A1 - Ostrovskaya, Y. T1 - Tribologisches Verhalten von Gleitlacken für kryogene Anwendungen PY - 2003 SN - 3-00-003404-8 SP - 25/1 EP - 25/10 PB - GfT CY - Moers AN - OPUS4-2659 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Brand, J. A1 - Brand, C. A1 - Wittorf, R. A1 - Hartelt, Manfred T1 - Reibungs- und Verschleißverhalten von a-C:H-Schichten unter mediengeschmierten Bedingungen T2 - 44. Tribologie-Fachtagung CY - Göttingen, Deutschland DA - 2003-09-22 PY - 2003 SN - 3-00-003404-8 VL - 1 SP - 21-1-21-10 PB - GfT CY - Moers AN - OPUS4-2660 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Brand, J. A1 - Brand, C. A1 - Wittorf, R. A1 - Hartelt, Manfred T1 - Tribologische Charakterisierung metalldotierter DLC-Schichten T2 - 44. Tribologie-Fachtagung CY - Göttingen, Deutschland DA - 2003-09-22 PY - 2003 SN - 3-00-003404-8 VL - 1 SP - 20-1-20-10 PB - GfT CY - Moers AN - OPUS4-2661 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Witt, Klaus ED - Sprinsteen, A. T1 - Spectral and colorimetric intercomparison of fluorescent materials - polychromatic versus monochromatic irradiation T2 - 4th Oxford Conference on Spectroscopy ; 4th Oxford Conference on Spectrometry CY - Davidson, NC, USA DA - 2002-06-10 KW - Luminescent materials KW - Two-monochromator-spectrophotometer KW - One-monochromator-spectrophotometer KW - Reflected radiance factor KW - Luminescent radiance factor KW - Total radiance factor KW - Colour difference KW - UV-filter adjustment KW - Reference material PY - 2003 SN - 0-8194-4600-9 SN - 1605-7422 N1 - Serientitel: SPIE Volume – Series title: SPIE Volume IS - 4826 SP - 61 EP - 69 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-2662 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Schulz, Ulrich ED - Ziegahn, K.-F. T1 - Simulation der Wirkung einer sechsjährigen Freibewitterung auf Flugzeuglackierungen T2 - 33. Jahrestagung der GUS 2004 - Umwelteinflüsse erfassen, simulieren, bewerten CY - Pfinztal, Deutschland DA - 2004-03-17 KW - Freibewitterung KW - Flugzeuglackierung KW - ADF KW - Künstliche Bewitterung KW - pH KW - Beschleunigung KW - Natural weathering KW - Aircraft coating KW - Artificial weathering KW - Acceleration PY - 2004 SN - 3-9808382-4-2 SP - 199 EP - 209 PB - DWS Werbeagentur und Verlag GmbH CY - Pfinztal AN - OPUS4-3560 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Isecke, Bernd ED - Weber, T. T1 - Anwendung verzinkter Bauteile bei Kontakt mit mineralischen Baustoffen T2 - GfKorr-Tagung Zink im Bauwesen CY - Würzburg, Deutschland DA - 2004-02-12 KW - Verzinkte Bauteile KW - Korrosionsbelastung durch Baustoffe KW - Einfluss des pH-Werts und der Expositionsbedingungen KW - Schmelztauchverzinkte Bewehrungsstähle KW - Chlorid- und Carbonatisierungseinfluss KW - Verzinkte Spannstähle KW - Kontakt mit mineralischen Baustoffen KW - Neutralsaure Umgebungsbedingungen PY - 2004 SN - 3-935406-11-8 SP - 63 EP - 70 PB - GfKORR CY - Frankfurt am Main AN - OPUS4-3487 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dilz, K. A1 - Pohl, J. A1 - Rühe, S. A1 - Thomas, Hans-Martin A1 - Casperson, Ralf T1 - Online-Schweißnahterkennung von Schienenprüfzügen mittels Wirbelstromverfahren N2 - Zur Detektion von Schweißnähten an verlegten Schienen gehört deren Identifikation und Lokalisation. Die Aufgabe, Schweißnähte derart zu detektieren, stellt sich bei der Prüfung eines Gleisnetzes auf Schädigungen, aber auch unabhängig davon. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2003 CY - Mainz, Deutschland DA - 26.05.2003 PY - 2003 UR - http://www.ndt.net/article/dgzfp03/papers/v07/v07.htm SN - 3-931381-47-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 83-CD SP - 1 EP - 4 PB - DGZfP CY - Berlin AN - OPUS4-3491 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Österle, Werner A1 - Urban, Ingrid A1 - Gesatzke, Wolfgang A1 - Rooch, Heidemarie ED - Bartz, Wilfried J. T1 - Characterization and evaluation of the formation of friction layers during braking with conventional PMC friction material against a cast iron rotor T2 - 14th International Colloquium Tribology, "Tribology and Lubrication Engineering" CY - Stuttgart, Germany DA - 2004-01-13 PY - 2004 SN - 3-924813-54-X VL - 1 SP - 483 EP - 489 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-3494 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Scheibe, H.-J. A1 - Weihnacht, V. ED - Bouzakis, K.-D. T1 - Tribological Characterisation of Carbon Coatings at Room Temperature; Effect of Counter-Body Material and Humidity T2 - 4th International Conference THE Coatings in Manufacturing Engineering CY - Erlangen, Germany DA - 2004-04-05 KW - Carbon coating KW - Friction KW - Wear KW - Counter body KW - Humidity PY - 2004 SN - 3-87525-201-2 SP - 331 EP - 340 PB - Meisenbach CY - Bamberg AN - OPUS4-3480 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hübner, Wolfgang A1 - Aßmus, Kristin A1 - Pyzalla, A. A1 - Pinto, H. ED - Marini, M. T1 - Hydrogen uptake in stainless steels at low temperatures T2 - 5. HYPOTHESIS ; 5th International Conference HYPOTHESIS ; 5e Congresso Internazionale HYPOTHESIS CY - Porto Conte, Italy DA - 2003-09-07 KW - Stainless steel KW - Low temperature KW - Friction KW - Liquid hydrogen KW - Hydrogen absorption PY - 2003 SN - 88-86281-90-0 VL - 5 SP - 581 EP - 588 PB - SGEditoriali CY - Padova AN - OPUS4-3499 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Maierhofer, Christiane T1 - Guidelines for NDT methods in civil engineering N2 - The German Society for Non-destructive Testing (DGZfP) is a center of activity in research, development, application and dissemination concerning non-destructive testing (NDT) methods. The transfer of results from research to practical application is one of the main targets. Therefore the Technical Committee NDT in Civil Engineering has published ten guidelines providing information from scientifical background to practical application concerning NDT-methods like radar, ultrasonic and radiography. Considering radar for example the content and structure of these guidelines is described below. To contribute to harmonization of European regulations and standards these guidelines should be transferred into the English language area. They can serve as a basis for harmonized European standards. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/p002/p002.htm SN - 3-931381-49-8 SP - 1(?) EP - 5(?) PB - DGZfP CY - Berlin AN - OPUS4-3515 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Borchardt, Kerstin A1 - Wiggenhauser, Herbert T1 - Specimen for the improvement of NDT-methods - Design and construction of a large concrete slab for NDT methods at BAM N2 - The performance and reliability of NDT-CE methods must be assured to establish these methods for standard testing in construction and structure management. To develop and test NDT-methods as well as to investigate their reliability specimens with well-defined properties (defects and dimension) are needed. The design and construction of a large concrete specimen (40 m2) with various fixtures to simulate compaction faults, grouting faults and the variation of dimensions is described. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/p011/p011.htm SN - 3-931381-49-8 SP - 1(?) EP - 6(?) PB - DGZfP CY - Berlin AN - OPUS4-3517 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Erhard, Anton A1 - Munikoti, Vijayendra K. A1 - Brekow, Gerhard A1 - Tessaro, Ute A1 - Tscharntke, Dirk T1 - Modelling for the improvement of dissimilar weld inspection T2 - 16th World Conference on Nondestructive Testing CY - Montreal, Canada DA - 2004-08-30 PY - 2004 SP - 1 EP - 8(?) PB - International Committee for Non-Destructive Testing CY - Montreal AN - OPUS4-3518 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mietz, Jürgen A1 - Burkert, Andreas ED - Cziesielski, E. T1 - Elektrochemische Verfahren zur Detektion von Bewehrungsstahlkorrosion KW - Potentialfeldmessungen KW - Galvanostatische Pulsmessungen KW - Bewehrungsstahlkorrosion PY - 2004 SN - 3-433-01705-0 SP - 379 EP - 385 PB - Ernst CY - Berlin AN - OPUS4-3519 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schönhals, Andreas A1 - Goering, Harald A1 - Schick, C. A1 - Frick, B. A1 - Zorn, R. ED - Fourkas, J. T. T1 - Poly(methyl phenyl siloxane) in random nanoporous glasses - molecular dynamics and structure N2 - The effect of a nanometer confinement on the molecular dynamics of poly(methyl phenyl siloxane) (PMPS) was studied by dielectric spectroscopy (DK), temperature modulated DSC (TMDSC) and neutron scattering (NS). DK and TMDSC experiments show that for PMPS in 7.5 nm pores the molecular dynamics is faster than in the bulk which originates from an inherent length scale of the underlying molecular motions. At a pore size of 5 nm the temperature dependence of the relaxations times changes from a Vogel-Fulcher-Tammann like behavior to an Arrhenius one. At the same pore size Dcp vanishes. These results give strong support that the glass transition has to be characterized by an inherent length scale of the relevant molecular motions. Quasielastic neutron scattering experiments reveal a strong change even in the microscopic dynamic. T2 - Symposium P: "Dynamics in Small Confining Systems VII" ; MRS fall meeting 2004 CY - Boston, MA, USA DA - 2003-12-01 KW - Nanometer Confinement KW - Dielectric and thermal spectroscopy KW - Neutron scattering KW - Poly(methyl phenyl siloxane) PY - 2004 SN - 1-558-99728-8 DO - https://doi.org/10.1557/PROC-790-P9.3 SN - 0272-9172 N1 - Serientitel: Materials Research Society symposium proceedings – Series title: Materials Research Society symposium proceedings IS - 790 SP - P9.3.1 EP - P9.3.6 PB - Materials Research Society CY - Warrendale, Pa. AN - OPUS4-3520 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Burkert, Andreas A1 - Fischer, Joachim T1 - Korrosionserscheinungen durch Desinfektionsmaßnahmen in Rohrleitungen und Anlagen aus nichtrostendem Stahl T2 - 3-Länder-Korrosionstagung "Korrosion und Korrosionsschutz in Trinkwasser-Installationen" CY - Berlin, Deutschland DA - 2004-04-19 KW - Desinfektion KW - Trinkwasserleitung KW - Lochkorrosion KW - Schadensfälle und Mechanismen PY - 2004 SN - 3-935406-13-4 SP - 134 EP - 144 PB - DECHEMA CY - Frankfurt am Main AN - OPUS4-3521 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Peplinski, Burkhard A1 - Kleeberg, R. A1 - Bergmann, J. A1 - Wenzel, J. ED - Andersson, Y. ED - Mittemeijer, E. ED - Welzel, U. T1 - Quantitative phase analysis using the Rietveld method - Estimates of accuracy and possible problems based on two interlaboratory comparisons T2 - 8th European Powder Diffraction Conference CY - Uppsala, Sweden DA - 2002-05-23 KW - Interlaboratory Comparison KW - Quantitative Phase Analysis QPA KW - Reference Materials KW - Refinement Strategy KW - Rietveld Analysis KW - Round Robin KW - Silicon Nitride PY - 2004 SN - 0-87849-935-0 SN - 0255-5476 N1 - Serientitel: Materials science forum – Series title: Materials science forum IS - 443-444 SP - 45 EP - 50 PB - Trans Tech Publ. CY - Uetikon-Zuerich AN - OPUS4-3532 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fomine, Pavel A1 - Mitropetros, Constantinos A1 - Hieronymus, Hartmut T1 - Explosion Limits of a Single Oxygen Containing Bubble in Organic Solvent with High Saturated Vapor Pressure T2 - 11th International Symposium "Loss Prevention 2004" CY - Prague, Czech Republic DA - 2004-05-31 KW - Bubble explosion KW - Condensation KW - Explosion limit KW - Safety PY - 2004 SN - 80-0201574-6 SP - PG2179 EP - PG2185 PB - Ceská Spolecnost Chemického Inzenýrství CY - Prag AN - OPUS4-3575 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Parhizkar, T. A1 - Maultzsch, Matthias A1 - Hillemeier, B. A1 - Ramezanianpour, A.A. ED - Maultzsch, M. T1 - The use of polymers in concrete repair systems for the Persian Gulf region T2 - 11th International Congress on Polymers in Concrete (ICPIC `04) CY - Berlin, Germany DA - 2004-06-02 KW - Concrete deterioration KW - Polymer modified repair mortars KW - Concrete repairs KW - Styrene butadiene rubber (SBR) KW - Latex KW - Polyvinyl propionate KW - Silica fume KW - Hot environment PY - 2004 SN - 3-00-013706-8 SP - 133 EP - 142 PB - BAM CY - Berlin AN - OPUS4-3577 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias T1 - Review on Lubricious Oxides and Their Practical Importance PY - 2004 SN - 0-9247-4872-7 SP - 59 EP - 77 PB - Dekker CY - New York AN - OPUS4-3582 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schröder, Volkmar A1 - Daubitz, R. T1 - Evaluation of Standard Test Methods for the Determination of Explosion Limits of Gases and Vapors T2 - 11th International Symposium "Loss Prevention 2004" CY - Prague, Czech Republic DA - 2004-05-31 KW - Explosion Limits KW - Flammability limits KW - Standard test methods KW - Explosion prevention KW - European standardization PY - 2004 SN - 80-0201574-6 SP - PG2109 EP - PG2117 PB - Ceská Spolecnost Chemického Inzenýrství CY - Prag AN - OPUS4-3584 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meggyes, Tamás A1 - Debreczeni, A. T1 - Neue Wege in der Behandlung von Trübefeststoffen T2 - 11. Braunschweiger Deponie- und Dichtwandseminar 2004, Braunschweig CY - Braunschweig, Deutschland DA - 2004-01-01 PY - 2004 SN - 3-927610-65-8 IS - 74 SP - 43 EP - 63 PB - Inst. für Grundbau und Bodenmechanik, TU Braunschweig CY - Braunschweig AN - OPUS4-3568 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berti, G. A1 - Delhez, R. A1 - Norval, S. A1 - Peplinski, Burkhard A1 - Tolle, E. A1 - Verollet, J. ED - Andersson, Y. ED - Mittemeijer, E. ED - Welzel, U. T1 - Standardisation of X-ray powder diffraction methods T2 - 8th European Powder Diffraction Conference CY - Uppsala, Sweden DA - 2002-05-23 KW - CEN/TC 138 KW - Standard KW - X-Ray Diffraction PY - 2004 SN - 0-87849-935-0 SN - 0255-5476 N1 - Serientitel: Materials science forum – Series title: Materials science forum IS - 443-444 SP - 31 EP - 34 PB - Trans Tech Publ. CY - Uetikon-Zuerich AN - OPUS4-3569 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilrich, Cordula T1 - Acetylene cylinders: Porous mass and impact stability T2 - 11th International Symposium "Loss Prevention 2004" CY - Prague, Czech Republic DA - 2004-05-31 KW - Acetylene KW - Acetylene Cylinders KW - Acetylenflaschen KW - Porous Mass KW - Poröse Masse KW - Impact Stability KW - Stoßfestigkeit PY - 2004 SN - 80-0201574-6 SP - PG2226 EP - PG2232 PB - Ceská Spolecnost Chemického Inzenýrství CY - Prag AN - OPUS4-3573 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molnarne, Maria T1 - Database Chemsafe - A basis for cooperation T2 - 11th International Symposium "Loss Prevention 2004" CY - Prague, Czech Republic DA - 2004-05-31 PY - 2004 SN - 80-0201574-6 SP - PG2468 EP - PG2474 PB - Ceská Spolecnost Chemického Inzenýrství CY - Prag AN - OPUS4-3585 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias A1 - Skopp, André A1 - Kelling, Norbert A1 - Berger, L.-M. ED - Suchanék, J. T1 - Tribological Characterization of Titanium Suboxide Coatings Prepared by VPS Spraying T2 - 4th International Tribology Conference "Tribology of Surface Layers and Coatings" CY - Prague, Czech Republic DA - 2004-06-17 KW - Titanium oxide coatings KW - Thermal spraying KW - Unlubricated sliding wear KW - Lubricated sliding wear KW - Lubricants PY - 2004 SN - 80-2393123-7 PB - Czech Tribology Society CY - Prag AN - OPUS4-3638 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lange, Axel A1 - Harbich, Karl-Wolfram A1 - Hentschel, Manfred P. T1 - Röntgenrefraktometrie ermittelt die Faserenthaftung in Kompositen T2 - DGZfP-Jubiläumstagung 1993 Zerstörungsfreie Materialprüfung CY - Garmisch-Partenkirchen, Deutschland DA - 1993-05-17 PY - 1993 VL - 37-2 SP - 778 EP - 785 PB - DGZfP CY - Berlin AN - OPUS4-3646 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hentschel, Manfred P. A1 - Ekenhorst, Derk A1 - Harbich, Karl-Wolfram A1 - Lange, Axel ED - Naslain, R. ED - Lamon, J. ED - Doumeingts, D. T1 - C-fibre degradation debonding and lamella buckling measurement in CMC by new X-ray topography T2 - 6th European Conference on Composite Materials ; 1st International Conference on High Temperature Ceramic Matrix Composites (HT-CMC1) CY - Bordeaux, France DA - 1993-09-20 PY - 1993 SN - 1-85573-143-6 VL - 1 SP - 245 EP - 250 PB - Woodhead CY - Cambridge AN - OPUS4-3647 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz ED - Cassereau, D. T1 - The influence of the track on railway induced ground vibration T2 - Joint Congress CFA/DAGA '04 ; 7e Congrès Français d'Acoustique ; 30. Deutsche Jahrestagung für Akustik ; Salon Européen de l'Acoustique ; Europäische Akustik-Austellung CY - Strasbourg, France DA - 2004-03-22 PY - 2004 SN - 2-9521105-2-2 VL - 2 SP - 1079 EP - 1080 PB - Société Française d'Acoustique (SFA) CY - Paris AN - OPUS4-3710 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bremser, Wolfram A1 - Hässelbarth, Werner ED - Ciarlini. P., T1 - Uncertainty in semi-qualitative testing PY - 2004 SN - 981-238904-0 N1 - Serientitel: Series on advances in mathematics for applied sciences – Series title: Series on advances in mathematics for applied sciences IS - 66 SP - 16 EP - 23 PB - World Scientific CY - Singapur AN - OPUS4-3731 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stephan, H. A1 - Gloe, K. A1 - Kraus, Werner A1 - Spies, H. A1 - Johannsen, B. A1 - Wichmann, K. A1 - Reck, Günter A1 - Chand, D. K. A1 - Bharadwaj, P. K. A1 - Müller, U. A1 - Müller, W. M. A1 - Vögtle, F. ED - Moyer, B. A. T1 - Binding and extraction of pertechnetate and perrhenate by azacages T2 - Symposium Fundamentals and Applications of Anion Separations ; American Chemical Society national meeting CY - Chicago, IL, USA DA - 2001-08-25 PY - 2004 SN - 0-306-47911-7 SP - 151 EP - 168 PB - Kluwer Acad./Plenum Publ. CY - New York, NY AN - OPUS4-3667 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomé-Kozmiensky, K. J. A1 - Löschau, M. A1 - Kley, Gerd A1 - Köcher, Peter A1 - Thiel, S. T1 - Entsorgung von Sekundärabfällen aus der Abfallverbrennung T2 - Abfallwirtschaft für Wien CY - Wien, Österreich DA - 2004-06-24 KW - Abfallverbrennung KW - Schlacke KW - Filterstaub KW - Verwertung KW - Schmelzen KW - Technische Silikate KW - Verfahrenstechnik KW - Verfahrensübersicht PY - 2004 SN - 3-935317-17-4 SP - 497 EP - 742 PB - TK-Verl. CY - Neuruppin AN - OPUS4-3683 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Harbich, Karl-Wolfram A1 - Hentschel, Manfred P. A1 - Lange, Axel ED - Hemelrijck, Danny van T1 - New X-ray refractometry for nondestructive characterization of hihg performance composites and ceramics T2 - 1st Joint Belgian-Hellenic Conference on Nondestructive Testing CY - Patras, Greece DA - 1995-05-22 PY - 1996 SN - 90-5410-595-X SP - 185 EP - 189 PB - Balkema CY - Rotterdam, Netherlands AN - OPUS4-3660 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Harbich, Karl-Wolfram A1 - Hentschel, Manfred P. A1 - Ekenhorst, Derk A1 - Schors, Jörg ED - Michel, B. T1 - X-ray refraction for nondestructive investigation of micro cracks and impacts T2 - 2nd International Conference and Exhibition Micro Materials CY - Berlin, Germany DA - 1997-04-16 PY - 1997 SN - 3-932434-05-6 VL - 1 SP - 1025 EP - 1027 PB - ddp Goldenbogen CY - Dresden AN - OPUS4-3662 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hübert, Thomas A1 - Banach, Ulrich T1 - Glaskeramische Tieftemperatursensoren T2 - Tagung Temperatur '98 CY - Berlin, Deutschland DA - 1998-02-16 PY - 1998 SN - 3-18-091379-7 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1379 SP - 151 EP - 156 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-3770 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hübert, Thomas A1 - Harder, Ulrike A1 - Mosel, Günter A1 - Witke, Klaus ED - Wright, A. ED - Feller, S. ED - Hannon, A. T1 - Structural investigations of lead and strontium borate glasses T2 - Second International Conference on Borates Glasses, Crystals and Melt CY - Abingdon, England DA - 1996-07-22 KW - Glasherstellung KW - Borate PY - 1996 SN - 0-900682-23-X SP - 156 EP - 163 PB - Society of Glass Technology CY - Sheffield AN - OPUS4-3771 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Patitz, G. A1 - Redmer, Bernhard A1 - Hübner, M. A1 - Maier, Bärbel A1 - Ewert, Uwe ED - Grassegger-Schön, G. T1 - Kombination zerstörungsfreier Prüfverfahren zur Strukturaufklärung beim Säulenjoch der Heiligen Halle am Markt von Priene T2 - 10. Tagung Natursteinsanierung CY - Stuttgart, Deutschland DA - 2004-03-19 KW - Baudenkmäler KW - Strukturaufklärung KW - Zerstörungsfreie Prüfung KW - Videoskopie KW - Radar KW - Radiografie PY - 2004 SN - 3-935643-12-8 SP - 99 EP - 107 PB - Siegl CY - München AN - OPUS4-4817 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiggenhauser, Herbert A1 - Gardei, André A1 - Kohl, Christoph A1 - Maierhofer, Christiane A1 - Krause, Martin A1 - Streicher, Doreen ED - Watanabe, E. ED - Frangopol, D. T1 - Development and Application of Echo-Methods for NDE of Post Tensioned Concrete Bridges T2 - 2nd International Conference on Bridge Maintenance, Safety and Management CY - Kyoto, Japan DA - 2004-10-19 KW - ZfPBau KW - Spannbetonbrücken KW - Ultraschall Echo KW - Impact-Echo KW - Impuls Radar PY - 2004 SN - 90-5809-680-7 PB - Balkema CY - Leiden AN - OPUS4-4739 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jankowski, Lukasz ED - Koike, Y. T1 - Explanation and modelling of angle-dependent scattering in polymer optical fibres T2 - 13th International Plastic Optical Fibres Conference 2004 CY - Nuremberg, Germany DA - 2004-09-27 PY - 2004 SN - 3-905084-70-8 SP - 195 EP - 202 PB - AKM Congress Service CY - Basel AN - OPUS4-4743 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fomine, Pavel A1 - Mitropetros, Constantinos A1 - Hieronymus, Hartmut ED - Bradley, D. ED - Drysdale, D. ED - Molkov, V. T1 - Approximate model of chemical equilibrium in heterogeneous gas-particles mixtures T2 - 4th International Seminar on Fire and Explosion Hazards CY - Londonderry, Northern Ireland, UK DA - 2003-09-08 PY - 2004 SN - 1-85923-186-1 SP - 219 EP - 228 PB - FireSERT, University of Ulster CY - Newtonabbey AN - OPUS4-4837 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Xu, Ping ED - Pohl, M. T1 - Hochgenaue Thermometrie zur Ermittlung von Risseinleitung und Rissausbreitung an zyklisch beanspruchten Punktschweißverbindungen T2 - Werkstoffprüfung - Konstruktion, Qualitätssicherung und Schadensanalyse CY - Neu-Ulm, Deutschland DA - 2004-11-25 KW - Ermüdungsversuch KW - Rissdetektion KW - Thermometrie PY - 2004 SN - 3-88355-337-9 SP - 279 EP - 284 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-4839 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rohrmann, Rolf A1 - Said, Samir A1 - Schmid, Wolfgang ED - Watanabe, E. ED - Frangopol, D. T1 - Health monitoring of a steel bridge under heavy load traffic T2 - IABMAS '04 ; 2nd International Conference on Bridge Maintenance, Safety and Management CY - Kyoto, Japan DA - 2004-10-18 KW - Bridge Assessment KW - Heavy Load Traffic KW - Damage Detection KW - Structural Health Monitoring KW - Modal Analysis PY - 2004 SN - 90-5809-680-7 PB - Balkema CY - Leiden AN - OPUS4-4841 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hemmleb, Matthias A1 - Weritz, Friederike A1 - Maierhofer, Christiane T1 - Multispektraltechniken für die Schadensklassifizierung an Bauwerksoberflächen T2 - Feuchtetag 2004 ; Workshop Onsiteformasonry 2004 CY - Berlin, BAM, Deutschland DA - 2004-11-18 KW - Multispektraltechnik KW - Multispektralklassifizierung KW - IR-Aufnahme KW - Schadenserfassung KW - Zerstörungsfreie Prüfung im Bauwesen KW - Mauerwerk KW - Feuchtigkeit PY - 2004 SN - 3-931381-59-5 N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 91-CD SP - 277 EP - 286 PB - DGZfP CY - Berlin AN - OPUS4-4829 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molnarne, Maria A1 - Möller, W. O. ED - Bradley, D. ED - Drysdale, D. ED - Molkov, V. T1 - Estimation methods for the limiting oxygen concentration of flammable/inert/air systems and minimum safe gap T2 - 4th International Seminar on Fire and Explosion Hazards CY - Londonderry, Northern Ireland, UK DA - 2003-09-08 KW - Safety data KW - CHEMSAFE KW - Sicherheitstechnische Kenngrößen KW - Estimation methods KW - Berechnungsmethoden PY - 2004 SN - 1-85923-186-1 VL - 4 SP - 777 EP - 782 PB - FireSERT, University of Ulster CY - Newtonabbey AN - OPUS4-4903 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molnarne, Maria A1 - Schröder, Volkmar T1 - Evaluation of Fire and Explosion Hazards of Gas Mixtures using Explosion Diagrams (Beurteilung der Brand- und Explosionsgefahren von Gasgemischen mit Hilfe von Explosionsdiagrammen) N2 - An important method to prevent fires and explosions is to avoid explosive fuel-air mixtures. For this purpose the exact knowledge of the explosion range is required as a function of the combustible, oxidizer and inert gas concentrations. Frequently triangular diagrams are used in order to display the explosion range. This paper describes how to use the TRIANGLE software for flammability diagrams. Furthermore a calculation method for the flammability of gas mixtures is shown. T2 - 3rd International ESMG Symposium: Process Safety and Industrial Explosion Protection CY - Nuremberg, Germany DA - 2004-03-16 KW - Safety data KW - CHEMSAFE KW - Sicherheitstechnische Kenngrößen KW - Estimation methods KW - Berechnungsmethoden KW - Inerting KW - Explosion diagram PY - 2004 SN - 3-9807567-3-4 SP - 1(?) EP - 9(?) PB - European Safety Management Group CY - Hamm AN - OPUS4-4904 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molnarne, Maria T1 - CHEMSAFE - A basis for cooperation T2 - 11th International Symposium "Loss Prevention and Safety Promotion in the Process Industries” CY - Prague, Czech Republic DA - 2004-05-31 PY - 2004 SN - 80-0201574-6 SP - PG 2468 EP - 2474 PB - Ceská Spolecnost Chemického Inzenýrství CY - Prag AN - OPUS4-4905 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Hamann, M. A1 - Hennen, C. A1 - Knupfer, B. A1 - Marchisio, M. A1 - da Porto, F. A1 - Binda, L. A1 - Zanzi, L. T1 - Structural evaluation of historic walls and columns in the Altes Museum in Berlin using non-destructive testing methods T2 - Structural Analysis of Historical Constructions / 4th International Seminar on Structural Analysis of Historical Constructions, November 10-13, 2004, Padova, Italy (Proceedings) CY - Padova, Italy DA - 2004-11-10 KW - Non-destructive testing KW - Historic masonry KW - Case studies KW - Structural modelling PY - 2004 SN - 04-1536-379-9 SP - 331 EP - 341 PB - Taylor & Francis CY - London AN - OPUS4-4910 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molnarne, Maria A1 - Kollár-Hunek, K. A1 - Viczian, Gergely ED - Filka, J. T1 - Explosion areas of flammable substances - quality control of interpolated explosion curves and its mathematical background N2 - This paper discusses the approximation problems of the explosion range of flammable substances with diluents in air and demonstrates how the different Splines can be applied for interpolation of explosion curves based on measured data points. The methods are tested on many systems which consist of flammable gas/inert gas/oxidizing gas. A comparison of the results gained by applying different Spline-functions and a computer presentation of the results with help of the program TRIANGLE are also given. T2 - M´´uszaki Kémiai Napok '04 ; Days of Chemical Engineering '04 CY - Veszprém, Hungary DA - 2004-04-20 PY - 2004 SN - 963-9495-37-9 SP - 45 EP - 48 PB - KE MKKI CY - [Veszprém] AN - OPUS4-4976 LA - hun AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Köpp, Christian A1 - Wendrich, Astrid T1 - On-site investigation techniques for the structural evaluation of historic masonry buildings - a European research project T2 - Structural Analysis of Historical Constructions / 4th International Seminar on Structural Analysis of Historical Constructions CY - Padova, Italy DA - 2004-11-10 KW - Non-destructive testing KW - Historic masonry KW - Case studies KW - Structural modelling PY - 2004 SN - 04-1536-379-9 SP - 313 EP - 320 PB - Taylor & Francis CY - London AN - OPUS4-4979 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Starke, K. A1 - Ristau, D. A1 - Martin, Sven A1 - Hertwig, Andreas A1 - Krüger, Jörg A1 - Allenspacher, P. A1 - Riede, W. A1 - Meister, S. A1 - Theiss, C. A1 - Sabbah, A. A1 - Rudolph, W. A1 - Raab, V. A1 - Grigonis, R. A1 - Rakickas, T. A1 - Sirutkaitis, V. ED - Exarhos, G. J. T1 - Results of a round-robin experiment in multiple-pulse LIDT measurement with ultrashort pulses T2 - 35th Annual Boulder Damage Symposium ; 35th Annual Symposium on Optical Materials for High-Power Lasers CY - Boulder, CO, USA DA - 2003-09-22 KW - Multiple-pulse damage KW - ISO 11254-2 KW - S on 1-LIDT KW - Round-robin experiment KW - CHOCLAB PY - 2004 SN - 0-8194-5163-0 DO - https://doi.org/10.1117/12.525135 SN - 0038-7355 N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 5273 SP - 388 EP - 395 PB - SPIE, the International Society for Optical Engineering CY - Bellingham, Wash. AN - OPUS4-4948 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pötschke, P. A1 - Bhattacharyya, A. R. A1 - Goering, Harald ED - Radusch, H.-J. ED - Fiedler, L. T1 - Use of carbon nanotubes in polymers T2 - Internationale Fachtagung Polymerwerkstoffe ; P-2002 CY - Halle (Saale), Germany DA - 2002-09-25 PY - 2002 SN - 3-86010-656-2 PB - Martin-Luther-Univ. Halle-Wittenberg CY - Halle (Saale) AN - OPUS4-2060 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Xu, Ping A1 - Lehmkuhl, Bernhard ED - Frenz, H. T1 - Temperaturmessung zum Ermitteln der Rissentstehung und des Rissfortschritts an widerstandspunktgeschweißten Verbindungen bei Ermüdungsversuchen N2 - Summary Das schon seit über 100 Jahren angewendete Punktschweißen ist auch heute noch das dominierende Fügeverfahren für Dünnblechstrukturen aus Stahl im Rohkarosseriebau. Die Schweißstellen sind dabei in Hinsicht auf die Lebensdauer häufig die schwächsten Stellen eines Bauteils. Es werden deshalb im Bereich Entwicklung und Konstruktion zur Auswahl geeigneter Schweißparameter für die zu verbindenden Werkstoffe sowie für den Ort und die Anzahl der erforderlichen Schweißungen Kennwerte benötigt, die das Ermüdungsverhalten von Punktschweißverbindungen charakterisieren. Solche Kennwerte werden von Berechnungsingenieuren auch benötigt, um das Ermüdungsverhalten von geschweißten Strukturen numerisch zu analysieren und die Lebensdauer vorherzusagen. Das Ermüdungsverhalten von Punktschweißverbindungen ist ein Strukturverhalten und hängt u.a. vom Grundwerkstoff, der konstruktiven Gestaltung der Struktur und der Beanspruchung in der Schweißzone ab. Der Einfluss dieser Größen auf die Zeitfestigkeit von Schweißverbindungen wird im Allgemeinen an bestimmten Proben durch Wöhler- Versuche ermittelt. Als Kennwerte für eine festgelegte Überlebenswahrscheinlichkeit werden die Höhe und die Neigung der Wöhlerlinie ermittelt. Die in [1] erläuteten Probleme in Hinsicht auf das Ermitteln aussagefähiger Kennwerte führten in den letzten Jahren zu der neuen Entwicklung, nämlich der grundlegenden Klärung der Zusammenhänge von Probensteifigkeitsverlauf, Rissentstehung und Risswachstum sowie lokaler Beanspruchung in der Schweißzone. Das thermometrische Verfahren, mit dessen Hilfe Rissentstehung und Risswachstum erfasst werden können, wird nachfolgend erläutert. T2 - 20. Tagung Werkstoffprüfung CY - Bad Nauheim, Deutschland DA - 2002-12-05 PY - 2003 SN - 3-527-30674-9 DO - https://doi.org/10.1002/9783527610310.ch27 SP - 211 EP - 216 PB - Wiley-VCH CY - Weinheim AN - OPUS4-2064 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molnarne, Maria A1 - Viczián, G. A1 - Kollár-Hunek, K. ED - Majdik, K. T1 - Gázelegyek robbanáshatár-mérési adatainak minöségellenörzése informatikai eszközökkel (dt.: Qualitätsprüfung der Messdaten von Gasgemischexplosionsgrenzen mit Hilfe von Programmierwerkzeugen) T2 - 8. Nemzetközi Vegyészkonferencia CY - Cluj-Napoca, Hungary DA - 2002-11-15 KW - Datenbank KW - Sicherheitstechnische Kenngrößen KW - Explosionsschutz PY - 2002 SN - 973-858098-6 VL - 8 SP - 350 EP - 354 CY - Cluj-Napoca AN - OPUS4-2068 LA - hun AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Banach, Ulrich A1 - Hübert, Thomas ED - Baselt, J. P. T1 - Kalibrierung von Sensoren zur Alkohol-Detektion T2 - 4. Dresdner Sensor-Symposium CY - Dresden, Deutschland DA - 1999-12-06 PY - 2000 SN - 3-933592-72-0 N1 - Serientitel: Dresdner Beiträge zur Sensorik – Series title: Dresdner Beiträge zur Sensorik IS - 12-4 SP - 111 EP - 114 PB - w.e.b.-Univ.-Verl. CY - Dresden AN - OPUS4-2046 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Banach, Ulrich A1 - Hübert, Thomas A1 - Kiesewetter, O. T1 - Prüfung und Anwendung von Halbleiter-Gassensoren für den Einsatz in der Umweltmeßtechnik T2 - Internationales Kolloquium CY - --- DA - 1999-04-27 PY - 1999 SN - 3-18-091443-2 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1443 SP - 573 EP - 585 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-2047 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hübert, Thomas A1 - Banach, Ulrich ED - Baselt, J. P. T1 - Validierung von Drucktaupunkt-Sensoren PY - 2002 SN - 3-935712-71-5 N1 - Serientitel: Dresdner Beiträge zur Sensorik – Series title: Dresdner Beiträge zur Sensorik IS - 16 SP - 201 EP - 204 PB - w.e.b. Universitätsverlag CY - Dresden AN - OPUS4-2051 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Daum, Werner A1 - Scholl, M. T1 - Standardisierte Messverfahren für POF - Stand der VDI/VDE-Arbeitskreisaktivitäten T2 - 9. ITG-Fachtagung Kommunikationskabelnetze CY - Köln, Deutschland DA - 2002-12-10 PY - 2002 SN - 3-8007-2738-2 IS - 174 SP - 35 EP - 39 PB - VDE-Verl. CY - Berlin AN - OPUS4-2132 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kedrinskii, V. A1 - Fomine, Pavel A1 - Taratuta, S. A1 - Vasil´ev, A. ED - Ball, G. T1 - Phase transition role in bubbly detonation problems T2 - 22nd International Symposium on Shock Waves (ISSW) CY - London, England, UK DA - 1999-07-18 PY - 1999 SN - 0-85432-706-1 CY - London AN - OPUS4-2034 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hübner, Wolfgang A1 - Klaffke, Dieter T1 - Einfluss der Zusammensetzung auf das tribologische Verhalten austenitischer CrNi-Stähle in Luft unterschiedlicher Feuchte und bei tiefen Temperaturen T2 - Tribologie-Fachtagung 2002 CY - Göttingen, Deutschland DA - 2002-09-23 PY - 2002 SN - 3-00-003404-8 VL - 1 SP - 10-1-10-10 PB - GfT CY - Moers AN - OPUS4-1990 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Aßmus, Kristin A1 - Hübner, Wolfgang A1 - Bohse, Jürgen A1 - Pinto, H. A1 - Pyzalla, A. T1 - Untersuchungsmethoden für die Austenitstabilität bei tribologischer Beanspruchung von FeCrNi-Legierungen PY - 2003 SN - 3-931381-41-2 N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 82-CD SP - 89 EP - 102 PB - DGZfP CY - Berlin AN - OPUS4-2396 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Zencker, Uwe A1 - Qiao, Linan A1 - Droste, Bernhard T1 - Entwicklung von Beurteilungsmethoden für Transport- und Lagerbehälter mit erhöhten metallischen Reststoffanteilen - Abschließende Untersuchungen (EBER III) T2 - 6. KONTEC ; 6. Internationales Symposium "Konditionierung Radioaktiver Betriebs- und Stilllegungsabfälle" ; 6th International Symposium "Conditioning of Radioactive Operational & Decommissioning Wastes" CY - Berlin, Deutschland DA - 2003-03-19 PY - 2003 SN - 3-9806415-6-2 VL - 6 SP - 623 EP - 630 CY - Hamburg AN - OPUS4-2398 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wahi, R. A1 - Chen, Weiye A1 - Kutumbarao, V. A1 - Skopp, André ED - Andersen, S. T1 - Deformation behaviour of NIMONIC PE16 under creep and tensile loading at 650°C T2 - 8th Risø International Symposium on Metallurgy and Materials Science CY - Roskilde, Denmark DA - 1987-09-07 PY - 1987 SN - 87-550-1331-7 SP - 537 EP - 542 PB - Risø National Laboratory CY - Roskilde, Denmark AN - OPUS4-2401 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias A1 - Habig, Karl-Heinz T1 - Tribologisches Hochtemperaturverhalten keramischer Werkstoffe unter Festkörperreibungsbedingungen T2 - VDI-Werkstofftag CY - München, Deutschland DA - 1988-03-15 PY - 1988 SN - 3-18-090670-7 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 670 SP - 683 EP - 697 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-2440 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Skopp, André A1 - Klaffke, Dieter ED - Bartz, Wilfried J. T1 - Tribological behaviour of hard coatings T2 - 11th International Colloquium "Tribology - Industrial and Automotive Lubrication", CY - Ostfildern, Germany DA - 1998-01-14 PY - 1998 SN - 3-924813-39-6 VL - 2 SP - 1039 EP - 1050 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-2425 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Skopp, André A1 - Woydt, Mathias T1 - Expertise on ceramic type coatings: Compilation of the macroscopic, microscopic and micro analytical results of samples coated with present solution of 8Y2O3oZrO2 rub tested against SiC tipped IN 718 blade - Work package 4 N2 - Gas turbine efficiency is significantly influenced by the pressure losses caused by the inevitable gap between the rotating turbine blades and the stator parts. Because contact between rotor and stator cannot be completely avoided with a small gap, systems are designed to allow for some rubbing. Honeycombs or abradable MCrAlY stator coatings are normally used to minimize the wear of the rotor blades when rubbing occurs. But, more efficient solutions must be developed on modern engines, because both suffer temperature limitation and standard MCrAlY have usually poor abradability. For higher temperature and closer control of the gap, a thick thermal-barrier coating must be applied on the stator, but presently with no rub-tolerance. To increase the abradability of the stator coating, its composition and structure can be modified, but such changes must be strictly limited with respect to the loss of erosion resistance. The solution can then lie in the hardening of the rotating blade tip to permit the use of harder ceramic or metallic coatings on the stator with greater resistance to erosion. These systems typically consist, on the blade tip, of hard particles embedded in a softer metallic matrix. In the present programme, it is therefore intended: - to assess the present European solutions, standard or in development, for outer air seals and blade tips. - to develop coated grits or new grits for the hardening of the blade tips, as well as to improve the matrix and the stator coating for long life systems. - to optimize the most promising of these systems, that will be tested on development rigs and on engine. The consortium includes several engine manufacturers, which are the potential users of the innovating solutions to be developed, companies having a large experience in the field of abradables and tip coatings and non industrial partners involved in tribology and materials science. T2 - Project 2. Advanced Abradables and Tip Coatings for Gas Turbines (BRITE-EURAM BRPR960187) CY - Berlin, Germany DA - 1998-01-01 PY - 1998 SN - 92-828-3230-9 SN - 1018-5593 IS - 17766 SP - 1(?) EP - 244(?) PB - Off. for Off. Publ. of the Europ. Communities CY - Luxembourg AN - OPUS4-2426 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schartel, Bernhard A1 - Krüger, Simone A1 - Wachtendorf, Volker A1 - Hennecke, Manfred T1 - Chemiluminescence - A promising new testing method for plastic optical fibres? T2 - 7th International Plastic Optical Fibres Conference (POF-7) CY - Berlin, Germany DA - 1998-10-05 PY - 1998 SN - 3-905084-55-4 VL - 7 SP - 248 EP - 249 PB - AKM AG CY - Basel AN - OPUS4-2433 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Aurich, Dietmar A1 - Helms, Rolf A1 - Österle, Werner A1 - Portella, Pedro Dolabella A1 - Ziebs, Josef T1 - Untersuchungen an einkristallinen Superlegierungen für Turbinenschaufeln T2 - VDEh-Vortragsveranstaltung "Stähle für den Stahlbau" CY - Düsseldorf, Deutschland DA - 1988-04-26 PY - 1988 SN - 3-514-00407-2 SP - 140 EP - 150 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-2456 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Österle, Werner ED - Hornbogen, E. ED - Jost, N. T1 - Microstructure strength relationship of low carbon martensite T2 - 1st European Conference on Martensitic Transformation in Science and Technology CY - Bochum, Germany DA - 1989-01-01 PY - 1989 SN - 3-88355-153-8 SP - 465 EP - 472 PB - DGM Informationsges. CY - Oberursel AN - OPUS4-2457 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Österle, Werner A1 - Li, Pengxi T1 - Einfluß der Oberflächenbearbeitung auf Mikrostruktur und Schädigungsmechanismus bei Hochtemperaturermüdung PY - 1990 SN - 3-18-140305-9 N1 - Serientitel: Fortschritt-Berichte VDI : Reihe 5, Grund- und Werkstoffe – Series title: Fortschritt-Berichte VDI : Reihe 5, Grund- und Werkstoffe IS - 203 SP - 140 EP - 154 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-2467 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gesatzke, Wolfgang A1 - Li, Pengxi A1 - Österle, Werner T1 - Elektronenmikroskopische Untersuchung von Fertigungseinflüssen auf das Werkstoffgefüge von Kfz-Legierungen T2 - Metallographie-Tagung CY - Friedrichshafen, Deutschland DA - 1991-09-11 PY - 1992 SN - 3-446-17157-6 SN - 0343-3579 N1 - Serientitel: Sonderbände der praktischen Metallographie – Series title: Sonderbände der praktischen Metallographie IS - 23 SP - 457 EP - 489 PB - Hanser CY - München AN - OPUS4-2471 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wäsche, Rolf A1 - Klaffke, Dieter A1 - Skopp, André ED - Bartz, Wilfried J. T1 - Tribological behaviour of silicon nitride with boron nitride as a solid lubricant PY - 1992 SN - 3-924813-28-0 N1 - Serientitel: Internationales Kolloquium / Technische Akademie Esslingen – Series title: Internationales Kolloquium / Technische Akademie Esslingen IS - 8 SP - 10.2-1 - 10.2-10 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-2406 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias A1 - Skopp, André ED - Bartz, Wilfried J. T1 - Keramik-Keramik-Verbundwerkstoffe mit verbesserten Reibungs- und Verschleißeigenschaften T2 - 8. Internationales Kolloquium. Technische Akademie Esslingen ; 8th International Colloquium. Technische Akademie Esslingen CY - Esslingen, Deutschland DA - 1992-01-14 PY - 1992 SN - 3-924813-28-0 N1 - Serientitel: Internationales Kolloquium / Technische Akademie Esslingen – Series title: Internationales Kolloquium / Technische Akademie Esslingen VL - 2 IS - 8 SP - 15.1-1-15.1-16 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-2407 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias A1 - Skopp, André A1 - Wäsche, Rolf ED - Carlsson, R. T1 - Ceramic-ceramic composite materials with improved friction and wear properties T2 - 4th International Symposium Ceramic Materials and Components for Engines CY - Göteborg, Sweden DA - 1991-01-01 PY - 1992 SN - 1-85166-776-8 SP - 1219 EP - 1239 PB - Elsevier CY - London AN - OPUS4-2409 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Lenke, I. A1 - Skopp, André ED - Telle, R. T1 - Tribologische Untersuchungen an TiN-Beschichtungen mit der Schwingungsverschleiß-Prüftechnik PY - 1994 SN - 3-925543-13-9 SP - 181 EP - 200 PB - Deutsche Keramische Gesellschaft CY - Köln AN - OPUS4-2414 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias A1 - Habig, Karl-Heinz ED - Ludema, K. C. T1 - High temperature sliding friction and wear of silicon infiltrated silicon carbide T2 - 7th International Conference on Wear of Materials CY - Denver, CO, USA DA - 1989-04-09 PY - 1989 SN - 0-7918-0304-X VL - 1 SP - 419 EP - 429 PB - American Soc. of Mechanical Engineers CY - New York, NY AN - OPUS4-2449 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias A1 - Klaffke, Dieter A1 - Habig, Karl-Heinz T1 - Sliding and Fretting Wear of MgO-ZrO2 PY - 1988 SN - 0-87170-331-9 SP - 71 EP - 78 PB - ASM International CY - Gaithersburg AN - OPUS4-2450 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias A1 - Habig, Karl-Heinz ED - Friedrich, K. T1 - Sliding friction and wear of Al2O3, ZrO2, SiC and Si3N4 PY - 1989 SN - 0-444-42524-1 SN - 0927-0108 N1 - Serientitel: Composite materials series – Series title: Composite materials series IS - 1 SP - 106 EP - 113 PB - Elsevier CY - Amsterdam AN - OPUS4-2451 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Österle, Werner A1 - Gesatzke, Wolfgang ED - Hansen, N. T1 - Investigation of the recovery process during long-term annealing of a 2.25Cr-1Mo steel T2 - 7th Risø International Symposium on Metallurgy and Materials Science ; 7th Risø International Symposium on Annealing Processes - Recovery, Recrystallization and Grain Growth CY - Roskilde, Denmark DA - 1986-09-08 PY - 1986 SN - 87-550-1250-7 VL - 7 SP - 481 EP - 485 PB - Risø National Laboratory CY - Roskilde, Denmark AN - OPUS4-2453 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Skopp, André A1 - Klaffke, Dieter A1 - Buchkremer-Hermanns, H. A1 - Ren, H. A1 - Weiß, W. ED - Bartz, Wilfried J. T1 - Oscillating sliding behavior of MW PACVD diamond coatings T2 - 10th International Colloquium CY - Esslingen, Germany DA - 1996-01-09 PY - 1996 SN - 3-924813-34-5 N1 - Serientitel: Internationales Kolloquium / Technische Akademie Esslingen – Series title: Internationales Kolloquium / Technische Akademie Esslingen IS - 10 SP - 1943 EP - 1959 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-2419 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Witke, Klaus A1 - Skopp, André A1 - Woydt, Mathias ED - Michel, B. T1 - Raman spectroscopic investigations in tribologically stressed contacts of (Ti,Mo)(C,N) ceramics T2 - 2nd International Conference and Exhibition Micro Materials CY - Berlin, Germany DA - 1997-04-16 PY - 1997 SN - 3-932434-05-6 VL - 1 SP - 1094 EP - 1096 PB - ddp Goldenbogen CY - Dresden AN - OPUS4-2421 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias A1 - Skopp, André ED - Zambelli, G. ED - Vincent, L. T1 - Céramiques et Composites à Matrice Céramique PY - 1998 SN - 2-88074-338-9 N1 - Sprachen: Englisch/Französisch - Languages: English/French SP - 187 EP - 196 PB - Presses polytechniques et universitaires romandes CY - Lausanne AN - OPUS4-2422 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Isecke, Bernd A1 - Mietz, Jürgen T1 - Bau- und Instandsetzungsmethoden - Elektrochemische Schutzverfahren zur Beseitigung von Korrosionsrisiken an Stahlbetonbauwerken PY - 2003 SN - 3-935243-14-6 N1 - Serientitel: Schriftenreihe des Verbandes Deutscher Architekten- und Ingenieurvereine – Series title: Schriftenreihe des Verbandes Deutscher Architekten- und Ingenieurvereine IS - 2 SP - 149 EP - 157 PB - Verl. Das Beispiel CY - Darmstadt AN - OPUS4-2789 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Chen, W. A1 - Darowski, N. A1 - Zizak, I. A1 - Schumacher, G. A1 - Klingelhöffer, Hellmuth A1 - Wanderka, N. A1 - Neumann, W. ED - Chandra, T. ED - Torralba, Jose M. ED - Sakai, T. T1 - Measurement of Gamma/Gamma' Lattice Mismatch in Creep Deformed SIngle Crystal Superalloy SC16 Using Synchrotron X-Radiation T2 - International Conference on Processing & Manufacturing of Advanced Materials CY - Leganés, Spain DA - 2003-07-07 KW - Superalloy KW - Lattice mismatch KW - High temperature KW - Creep deformed PY - 2003 SN - 0-87849-919-9 SN - 0255-5476 N1 - Serientitel: Materials science forum – Series title: Materials science forum IS - 426-432/5 SP - 4555 EP - 4560 PB - Trans Tech Publ. CY - Uetikon-Zürich AN - OPUS4-2790 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Likhachov, A. V. A1 - Pickalov, V. V. A1 - Ewert, Uwe A1 - Redmer, Bernhard ED - Mazal, P. T1 - Resolution Enhancement in Computerised Tomography by Deconvolution Methods T2 - 2nd International Workshop of NDT Experts CY - Prague, Czech Republic DA - 2003-10-06 KW - Mechanised radiography KW - Crack inspection KW - X-ray tomography KW - Crack overshoot PY - 2003 SN - 80-2142475-3 SP - 1(?) EP - 13(?) PB - Univ. of Technology CY - Brno AN - OPUS4-2794 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Plarre, Rüdiger A1 - Burkholder, W. T1 - Stored Products as Habitats PY - 2003 SN - 0-12-586990-8 SP - 1089 EP - 1094 PB - Acad. Press CY - New York AN - OPUS4-2797 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mellmann, Günter A1 - Meinhold, Uwe A1 - Maultzsch, Matthias ED - Stark, J. ED - Fischer, H.-B. T1 - Instandsetzung mit Spritzbeton - Anforderungen an den Untergrund T2 - 15. Ibausil - Internationale Baustofftagung CY - Weimar, Deutschland DA - 2003-09-24 PY - 2003 SN - 3-00-010932-3 VL - 2 SP - 2-0367-2-0376 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-2802 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Biermann, Vera A1 - Csovári, M. A1 - Csicsák, J. T1 - Uranium removal using elemental iron and hydroxyapatite in permeable reactive barriers T2 - 8th International Mine Water Association Congress CY - Johannesburg, Republic of South Africa DA - 2003-10-19 PY - 2003 SN - 0-620-31314-5 VL - 8 SP - 43 EP - 55 PB - International Mine Water Association IMWA CY - Johannesburg AN - OPUS4-2776 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schors, Jörg A1 - Lange, Axel A1 - Hentschel, Manfred P. ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - Precise Measurements of Fibre Direction, Type and Content in CFRP by X-Ray Rotation Topography T2 - 11th International Symposium on Nondestructive Characterization of Materials CY - Berlin, Germany DA - 2002-06-24 PY - 2003 SN - 3-540-40154-7 SP - 185 EP - 198 PB - Springer CY - Berlin AN - OPUS4-2766 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jasiûniene, Elena A1 - Illerhaus, Bernhard A1 - Goebbels, Jürgen ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - Use of 3D Micro Tomography for the Investigation of the Mechanical Properties of Cellular Metals PY - 2003 SN - 3-540-40154-7 SP - 235 EP - 242 PB - Springer CY - Berlin AN - OPUS4-2767 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jaenisch, Gerd-Rüdiger A1 - Goebbels, Jürgen A1 - Illerhaus, Bernhard A1 - Artemiev, Valentin M. A1 - Naumov, A. ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - Characterization of material structure by dynamic tomography T2 - 11th International Symposium on Nondestructive Characterization of Materials CY - Berlin, Germany DA - 2002-06-24 PY - 2003 SN - 3-540-40154-7 N1 - Geburtsname von Jaenisch, Gerd-Rüdiger: Tillack, G.-R. - Birth name of Jaenisch, Gerd-Rüdiger: Tillack, G.-R. SP - 243 EP - 250 PB - Springer CY - Berlin AN - OPUS4-2768 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Kelm, Jürgen A1 - Fritsch, Sebastian ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - Rubber processing monitored by ultrasound T2 - 11th International Symposium on Nondestructive Characterization of Materials CY - Berlin, Germany DA - 2002-06-24 PY - 2003 SN - 3-540-40154-7 SP - 659 EP - 664 PB - Springer CY - Berlin AN - OPUS4-2769 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Trappe, Volker A1 - Harbich, Karl-Wolfram A1 - Ernst, Hardy ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - Micro cracking and stress state under fatigue loading of CFRP T2 - 11th International Symposium on Nondestructive Characterization of Materials CY - Berlin, Germany DA - 2002-06-24 PY - 2003 SN - 3-540-40154-7 SP - 697 EP - 704 PB - Springer CY - Berlin AN - OPUS4-2770 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rudolph, Hans-Volker A1 - Hentschel, Manfred P. A1 - Ivers, Heinz A1 - Harbich, Karl-Wolfram ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - Characterization of damage accumulation during fatigue in fiber reinforced thermoplast by X-ray refraction T2 - 11th International Symposium on Nondestructive Characterization of Materials CY - Berlin, Germany DA - 2002-06-24 PY - 2003 SN - 3-540-40154-7 SP - 705 EP - 710 PB - Springer CY - Berlin AN - OPUS4-2771 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mc Hugh, Jarlath A1 - Stark, Wolfgang A1 - Döring, Joachim ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - Evaluation of the cure behaviour of epoxy resin using rheometric and ultrasonic techniques T2 - 11th International Symposium on Nondestructive Characterization of Materials CY - Berlin, Germany DA - 2002-06-24 PY - 2003 SN - 3-540-40154-7 SP - 651 EP - 658 PB - Springer CY - Berlin AN - OPUS4-2772 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Taffe, Alexander T1 - Concept for a reference pile testing site for the development and improvement of NDT-CE T2 - 13th European Conference on Soil Mechanics and Geotechnical Engineering ; 13e Congrès Européen de Mécanique des Sols et de la Géotechnique CY - Prague, Czech Republic DA - 2003-08-25 KW - Pile testing KW - Assessment KW - Quality control KW - Testing site KW - Reference testing PY - 2003 SN - 80-8676904-6 N1 - Serientitel: DGZfP-Proceedings BB – Series title: DGZfP-Proceedings BB IS - 13-2 SP - 763 EP - 766 CY - Praha AN - OPUS4-2759 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mellmann, Günter A1 - Meinhold, Uwe A1 - Maultzsch, Matthias ED - Stark, J. ED - Fischer, H.-B. T1 - Betoninstandsetzung mit Spritzbeton - Anforderungen an den Untergrund T2 - 15. Ibausil - Internationale Baustofftagung CY - Weimar, Deutschland DA - 2003-09-24 PY - 2003 SN - 3-00-010932-3 VL - 2 SP - 2-0367-2-0376 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-2763 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meinhardt, Christian T1 - Erschütterungsübertragung in Gebäude - Numerische und experimentelle Untersuchungen T2 - VDI-Fachtagung Baudynamik CY - Kassel, Deutschland DA - 2003-05-14 PY - 2003 SN - 3-18-091754-7 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1754 SP - 41 EP - 53 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-2834 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Steckert, Carsten T1 - Optische Oberflächeninspektion von Beschichtungen mittels farbmetrisch kalibrierter digitaler Bildanalyse N2 - Zur objektiven Bewertung von Lackierungen wurde ein Verfahren entwickelt, das auf einer ortsaufgelösten farbmetrischen Bewertung von Oberflächenstrukturen mit Methoden digitaler Farbbildanalyse basiert. Die Anwendung dieser Technik erforderte zunächst die farbmetrische Kalibrierung ausgewählter digitaler Ein- und Ausgabemedien (Farbmonitore und Flachbettscanner). In eine kommerzielle Farbbildanalysesoftware wurde dann ein Farbmanagementsystem implementiert, das auf den bereits ermittelten mathematischen Modellen basiert. Zur Klassifizierung der Beschichtungen wurden geeignete Merkmale bestimmt, die eine quantitative Beschreibung des dekorativen Effektes von Mikrostrukturen unter Berücksichtigung des Farbkontrastes und der Geometrie ermöglichen. T2 - Tagung 2003 CY - Langen, Deutschland DA - 2003-12-01 PY - 2003 UR - http://www.dfo-online.de/deutsch/pdf/vdi_programm.pdf SN - 3-18-091806-3 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1806 SP - 67 EP - 76 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-2835 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Harbich, Karl-Wolfram ED - van Hemelrijck, D. T1 - Quantitative determination of micro crack density in composites and polymers by X-ray refraction topography T2 - 3rd International Conference on Emerging Technologies in Non Destructive Testing CY - Thessaloniki, Greece DA - 2003-05-26 PY - 2003 SN - 90-5809-645-9 SP - 207 EP - 210 PB - Balkema CY - Lisse AN - OPUS4-2836 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz A1 - Rücker, Werner T1 - Praxisgerechtes Prognosemodell für Erschütterungen - Einfache Rechenverfahren für die Emission, Transmission und Immission T2 - VDI-Fachtagung Baudynamik CY - Kassel, Deutschland DA - 2003-05-14 PY - 2003 SN - 3-18-091754-7 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1754 SP - 1 EP - 22 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-2840 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schartel, Bernhard A1 - Braun, Ulrike A1 - Schwarz, U. A1 - Reinemann, S. ED - Lewin, M. T1 - Fire Retarded Polypropylene/Flax Biocomposites T2 - 14th Conference on Recent Advances in Flame Retardancy of Polymeric Materials ; 14th Annual BCC Conference on Flame Retardancy CY - Stamford, CT, USA DA - 2003-06-02 KW - Fire retardancy KW - PP/Flax Biocomposite KW - Expandable Graphite KW - Ammonium Polyphosphate KW - TG-FTIR KW - Cone Calorimeter PY - 2003 SN - 1-569-65930-3 VL - 14 SP - 219 EP - 228 PB - BCC CY - Norwalk, Conn. AN - OPUS4-2815 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fritsch, Sebastian A1 - Stark, Wolfgang A1 - Kelm, Jürgen ED - Kühnert, I. T1 - Möglichkeiten der Online-Kontrolle der Vulkanisation mit Ultraschall T2 - 18. TECHNOMER 2003 ; 18. Fachtagung über Verarbeitung und Anwendung von Polymeren CY - Chemnitz, Deutschland DA - 2003-11-13 KW - Kautschuk KW - Vulkanisation KW - Ultraschall PY - 2003 SN - 3-00-012510-8 SP - 1 EP - 10 PB - Techn. Univ. CY - Chemnitz AN - OPUS4-2822 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Burlet, H. A1 - McColvin, G. A1 - Henderson, M. B. A1 - Garcia, J. C. A1 - Peteves, S. A1 - Klingelhöffer, Hellmuth A1 - Maldini, M. A1 - Klotz, U. E. A1 - Luthi, T. A1 - Wilcock, I. M. ED - Strang, A. T1 - Microstructural and Mechanical Performance Assessment of Diffusion Bonded Bimetallic Model Discs T2 - 6th International Charles Parsons Turbine Conference CY - Dublin, Ireland DA - 2003-09-16 PY - 2003 SN - 1-904350-20-8 SN - 1366-5510 N1 - Serientitel: Book / The Institute of Materials, Minerals and Mining – Series title: Book / The Institute of Materials, Minerals and Mining IS - 800 SP - 735 EP - 748 PB - Maney CY - London AN - OPUS4-2823 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Zunkel, Astrid A1 - Burkert, Andreas T1 - Ungewöhnliche Korrosionsschäden an Aluminiumlegierungen T2 - 29. VDI-Jahrestagung "Schadensanalyse" CY - Würzburg, Deutschland DA - 2003-10-16 PY - 2003 SN - 3-18-091765-2 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1765 SP - 187 EP - 196 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-2824 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kautek, Wolfgang A1 - Hertwig, Andreas A1 - Martin, Sven A1 - Krüger, Jörg A1 - Lenzner, Matthias A1 - Spielmann, C. A1 - Lenner, M. A1 - Bunte, J. A1 - Puester, T. A1 - Burmester, T. A1 - Fiedler, A. A1 - Heberer, E. A1 - Brose, M. A1 - Stingl, A. A1 - Kiehl, P. A1 - Hönigsmann, H. A1 - Trautinger, F. A1 - Grabner, G. T1 - Safety in Femtosecond Laser Technology - Recent Results of a European Research Project (406) T2 - International Laser Safety Conference 2003 ; ILSC 2003 CY - Jacksonville, FL, USA DA - 2003-03-10 PY - 2003 SN - 0-912035-38-2 SP - 1(?) EP - 10(?) PB - Laser Institute of America CY - Orlando, Fla. AN - OPUS4-2259 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lausch, Regine A1 - Wiggenhauser, Herbert A1 - Schubert, F. T1 - Geometrieeffekte und Hüllrohrortung bei der Impaktecho-Prüfung von Betonbauteilen - Experimentelle und modelltheoretische Ergebnisse N2 - Zusammenfassung Bei der Errichtung von Spannbetonbauwerken und der Verwendung immer leistungsfähigerer Betone werden die Anforderungen an eine hochwertige und fehlerlose Bauausführung stetig höher. Zur Vermeidung von Baumängeln und damit zur Sicherung der Tragfähigkeit, sowie zur Erhöhung der Lebensdauer eines Bauwerks ist eine Qualitätsüberwachung bzw. - kontrolle notwendig. Die Hüllrohrortung und die Bestimmung des Verpresszustandes ist demzufolge eine Aufgabe, der im Bauwesen eine wachsende Bedeutung zukommt. An einem Betonprobekörper mit drei Hüllrohren mit unterschiedlichen Verpresszuständen wurden Messungen durchgeführt, mit dem Ziel, diese zu orten und Aussagen über den Verfüllzustand zu machen. Die Position der Hüllrohre im Betonprobekörper konnte eindeutig bestimmt werden. Es war nicht möglich, die Tiefenlage zu ermitteln. Nach der Einbringung und Verpressung eines Stabstahles in eines der Hüllrohre waren signifikante Veränderungen im Impaktechogramm zu erkennen, so dass die beiden Verfüllzustande voneinander zu unterscheiden waren. Gerade bei begrenzter Probekörpergeometrie ist zu beobachten, dass die Impaktechogramme mit regelmäßigen Mustern überlagert werden (Geometrieeffekte). Diese werden hauptsächlich durch die an den seitlichen Bauteilbegrenzungen reflektierten Wellenanteile ausgelöst, erkennbar in den EFIT-Simulationen, welche qualitativ sehr gut mit den experimentellen Befunden übereinstimmen. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Impaktecho KW - FOR384 KW - Geometrieeffekte KW - Numerische Simulation KW - Hüllrohr PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p34/p34.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-2214 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilsch, Gerd A1 - Schaurich, Dieter A1 - Wöstmann, Jens A1 - Wiggenhauser, Herbert T1 - Anwendungen der Laser Induced Breakdown Spectroscopy im Bauwesen N2 - Zusammenfassung Die Laser Induced Breakdown Spectroscopy (LIBS) ist eine analytische Methode mit der die Elementverteilung auf der Oberfläche von Proben orts- und tiefenaufgelöst ermittelt werden kann. Ein intensiver, infraroter Laserstrahl wird auf die Oberfläche fokussiert. Durch die hohe Energiedichte werden einige Mikrogramm Material verdampft und ein Plasma gebildet. Bei der Ausdehnung und Abkühlung des Plasmas wird die charakteristische Fluoreszenz der verdampften Elemente abgestrahlt und mit spektroskopischen Mitteln analysiert. Die Empfindlichkeit der Methode liegt im ppm-Bereich, die typische Messgenauigkeit beträgt einige Prozent. Die Ergebnisse liegen quasi on-line vor, es ist keine Probenpräparation notwendig und die Apparatur ist vor Ort einsetzbar. Im Artikel werden Anwendungen der LIBS zur Untersuchung von Baustoffen beschrieben. Die Ergebnisse der Ermittlung der Salzverteilung in Baustoffen, der Untersuchung der Betonzusammensetzung und dem Nachweis von hydrophobierten Schichten auf unterschiedlichen Baustoffen werden vorgestellt. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - On-line Elementanalyse KW - Salzverteilung KW - Betonzusammensetzung KW - Hydrophobierung PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p29/p29.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-2216 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasche, K. A1 - Ulm, G. A1 - Herrmann, K. A1 - Krumrey, M. A1 - Ade, G. A1 - Sümpel, J. A1 - Busch, I. A1 - Thomsen-Schmidt, P. A1 - Schädlich, S. A1 - Schindler, A. A1 - Frank, W. A1 - Procop, Mathias A1 - Beck, Uwe T1 - About the calibration of thickness standards on the nanometer scale T2 - 3rd International EUSPEN conference ; 3rd International conference. European Society for Precision Engineering and Nanotechnology ; 4th General meeting. European Society for Precision Engineering and Nanotechnology CY - Eindhoven, The Netherlands DA - 2002-05-26 PY - 2002 SN - 90-386-2883-8 SP - 1 EP - 5 CY - Eindhoven AN - OPUS4-2283 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rikowski, E. A1 - Krüger, Ralph-Peter A1 - Much, Helmut A1 - Schulz, Günter T1 - Characterization of silicon-polymers by liquid chromatography and MALDI-TOF-MS T2 - 37th IUPAC Congress ; 27th GDCh General Meeting CY - Berlin, Germany DA - 1999-08-14 PY - 1999 SN - 3-924763-80-1 PB - Gesellschaft Deutscher Chemiker CY - Frankfurt am Main AN - OPUS4-2241 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bücker, Michael A1 - Böcker, Wolfgang D. G. A1 - Reinsch, Stefan A1 - Unger, Brita ED - Acker, J. V. T1 - Wood Modification by Sol-Gel Derived Precursors T2 - 1st European Conference on Wood Modification ; 1st ECWM 2003 CY - Ghent, Belgium DA - 2003-04-03 KW - Silica-sol treatment KW - Wood-inorganic composite KW - Water repellency KW - Environmental stability PY - 2003 SN - 90-806565-2-6 SN - 1018-5593 SP - 255 EP - 259 PB - Univ., Laboratory of Wood Technology CY - Ghent AN - OPUS4-2521 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kuhmann, J. A1 - Harde, P. A1 - Pech, O. A1 - Pittroff, W. A1 - Preuß, A. A1 - Adolphi, B. A1 - Wirth, Thomas A1 - Österle, Werner ED - Reichl, H. T1 - Fluxless flip-chip bonding for the photonic assembly - comparison between evaporated SnPb (60/40) and AuSn (80/20) solder T2 - 5th International Conference on Micro-Electro-, -Opto-, -Mechanical Systems and Components CY - Potsdam, Germany DA - 1996-09-17 PY - 1996 SN - 3-8007-2200-3 VL - 5 SP - 91 EP - 97 PB - VDE-Verl. CY - Berlin AN - OPUS4-2544 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Österle, Werner ED - Liu, G. T1 - Alternative approaches to the microstructure-strength-relationship of LC and HSLA steels T2 - Third International Conference on HSLA Steels CY - Beijing, PR China DA - 1995-10-25 PY - 1995 SN - 7-504-62091-2 SP - 243 EP - 246 PB - China Science and Technology Press CY - Beijing AN - OPUS4-2506 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bettge, Dirk A1 - Jiao, F. A1 - Österle, Werner A1 - Ziebs, Josef ED - Lütjering, G. T1 - An extended model of the tension-compression asymmetry of single crystal nickel-base superalloys T2 - 6th International Fatigue Congress CY - Berlin, Germany DA - 1996-05-06 PY - 1996 SN - 0-08-042268-3 VL - 2 IS - 2 SP - 885 EP - 889 PB - Pergamon CY - Oxford AN - OPUS4-2508 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tscharntke, Dirk A1 - Heckel, Thomas A1 - Boehm, Rainer A1 - Erhard, Anton A1 - Krull, R. A1 - Lützner, J. A1 - Hintze, H. ED - Forde, M. C. T1 - Development of ultrasonic railway inspection systems using phased array methods T2 - 6th Railway Engineering Conference CY - London, England, UK DA - 2003-04-30 KW - NDT KW - Ultrasonic KW - Phased array KW - Railway KW - Inspection KW - Directivity pattern KW - Crack analysis/sizing PY - 2003 SN - 0-947644-51-2 PB - Engineering Technics Press CY - Edinburgh AN - OPUS4-2487 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Löhr, Manuel T1 - Untersuchung an wälzbeanspruchten diamantähnlichen Kohlenstoffschichten mittels der Akustischen Emission PY - 2003 SN - 3-931381-41-2 N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 82-CD SP - 73 EP - 88 PB - DGZfP CY - Berlin AN - OPUS4-2488 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Urban, Ingrid A1 - Dörfel, Ilona A1 - Österle, Werner A1 - Schierhorn, Eike T1 - Interfaces between hard coating systems and substrates T2 - 11th European Conference on Electron Microscopy (EUREM-11) CY - Dublin, Ireland DA - 1996-08-26 PY - 1996 SN - 2-9600163-0-0 PB - CESM, Committee of European Societies of Microscopy CY - Brussels AN - OPUS4-2545 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Österle, Werner A1 - Urban, Ingrid A1 - Nebauer, E. A1 - Ressel, P. ED - Thomann, H. T1 - Metallurgie von Ohmschen Kontakten auf aktiven Halbleiterschichten T2 - Werkstoffwoche '96 (WW) CY - Stuttgart, Deutschland DA - 1996-05-28 PY - 1997 SN - 3-88355-229-1 VL - 1 SP - 199 EP - 204 PB - DGM Informationsges. CY - Frankfurt AN - OPUS4-2546 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bremser, Wolfram A1 - Hässelbarth, Werner T1 - Uncertainty propagation via preparation, calibration and comparison steps in traceability networks T2 - 9e Congrès International Métrologie ; 9th International Metrology Congress CY - Bordeaux, France DA - 1999-10-18 PY - 1999 SN - 2-909430-88-X SP - 357 EP - 360 PB - MFQ, Collège Métrologie CY - Nanterre AN - OPUS4-2555 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hässelbarth, Werner A1 - Bremser, Wolfram T1 - Derived measurement standards of reduced uncertainty - A contradiction? T2 - 9e Congrès International Métrologie ; 9th International Metrology Congress CY - Bordeaux, France DA - 1999-10-18 PY - 1999 SN - 2-909430-88-X SP - 651 EP - 654 PB - MFQ, Collège Métrologie CY - Nanterre AN - OPUS4-2562 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Seeger, Stefan A1 - Müller, Wolfgang ED - Dixon, N. T1 - Theoretical approach to designing protection - Selecting a geomembrane strain criterion T2 - 1st IGS UK Chapter National Geosynthetics Symposium CY - Nottingham, England, UK DA - 2003-06-17 PY - 2003 SN - 0-7277-3234-X SP - 137 EP - 151 PB - Telford CY - London AN - OPUS4-2564 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klich, Harry ED - Fajgelj, A. T1 - Overview on the Activities at ISO/REMCO T2 - Workshop on Proper Use of Environmental Matrix Reference Materials CY - Berlin, Germany DA - 1999-04-22 PY - 1999 SN - 0-85404-739-5 SN - 0260-6291 N1 - Serientitel: Special publication / Royal Society of Chemistry – Series title: Special publication / Royal Society of Chemistry IS - 238 SP - 188 EP - 196 PB - Royal Soc. of Chemistry CY - Cambridge AN - OPUS4-2570 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klich, Harry ED - Fajgelj, A. T1 - The activities of REMCO, ISO's council on reference materials T2 - Workshop on Proper Use of Environmental Matrix Reference Materials CY - Berlin, Germany DA - 1999-04-22 PY - 1999 SN - 0-85404-739-5 SN - 0260-6291 N1 - Serientitel: Special publication / Royal Society of Chemistry – Series title: Special publication / Royal Society of Chemistry IS - 238 SP - 1 PB - Royal Soc. of Chemistry CY - Cambridge AN - OPUS4-2573 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Harbich, Karl-Wolfram A1 - Hentschel, Manfred P. A1 - Lange, Axel T1 - Quantitative Bestimmung der Mikrorissdichte in Kompositen und Polymerwerkstoffen mittels Röntgen-Refraktions-Topographie T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2003 CY - Mainz, Deutschland DA - 2003-05-26 PY - 2003 UR - http://www.ndt.net/article/dgzfp03/papers/p09/p09.htm SN - 3-931381-47-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 83-CD PB - DGZfP CY - Berlin AN - OPUS4-2871 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Goebbels, Jürgen A1 - Weidemann, Gerd A1 - Dittrich, R. A1 - Mangler, M. A1 - Tomandl, G. ED - Singh, J. T1 - Functionally graded porosity in ceramics - Analysis with high resolution computed tomography T2 - Innovative Processing and Synthesis of Ceramics, Glasses, and Composites Symposium ; 103rd Annual Meeting of the American Ceramic Society CY - Indianapolis, IN, USA DA - 2001-04-22 PY - 2001 SN - 1-574-98137-4 SN - 1042-1122 N1 - Serientitel: Ceramic transactions – Series title: Ceramic transactions IS - 129 SP - 113 EP - 124 PB - American Ceramic Society CY - Westerville, Ohio AN - OPUS4-2873 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Onel, Yener A1 - Illerhaus, Bernhard A1 - Goebbels, Jürgen T1 - 320 kV Mikrofokusröntgenröhre und Flächendetektor, eine Kombination für die 3D-CT? T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2003 CY - Mainz, Deutschland DA - 2003-05-26 PY - 2003 UR - http://www.ndt.net/article/dgzfp03/papers/v27/v27.htm SN - 3-931381-47-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 83-CD SP - 1 EP - 7(?) PB - DGZfP CY - Berlin AN - OPUS4-2874 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Goebbels, Jürgen ED - Gercke, P. ED - Eissenhauer, M. T1 - Herakles - Untersuchung der Bronzestatue mittels Radiographie und Röntgen-Computertomographie 2001 T2 - Begleitbuch zur gleichnamigen Studio-Ausstellung im Ballhaus am Schloß Wilhelmshöhe CY - Kassel, Deutschland DA - 2003-08-22 PY - 2003 SN - 3-931787-28-1 VL - 29 SP - 33 EP - 39 PB - Staatliche Museen CY - Kassel AN - OPUS4-2895 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ellingson, W. A. A1 - Ikeda, Y. A1 - Goebbels, Jürgen ED - Van Roode, M. ED - Ferber, M. K. ED - Richerson, D. W. T1 - Nondestructive evalution / characterization KW - NDE methods KW - Computed Tomography KW - Ceramic Gas Turbine PY - 2003 SN - 0-7918-0197-7 N1 - Serientitel: Progress in ceramic gas turbine development – Series title: Progress in ceramic gas turbine development IS - 2 SP - 493 EP - 519 PB - ASME Press CY - New York, NY AN - OPUS4-2896 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Goebbels, Jürgen ED - Buschow, K. H. J. T1 - NDT Techniques - Computed Tomography PY - 2001 SN - 0-08-043152-6 VL - 6 SP - 6009 EP - 6011 PB - Elsevier CY - Amsterdam AN - OPUS4-2900 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lebid, Solomija A1 - Habel, Wolfgang A1 - Daum, Werner T1 - How reliable measure composite-embedded FBG sensors under the influence of transverse and point-wise deformations? T2 - 16th International Conference on Optical Fiber Sensors (OFS-16) CY - Nara, Japan DA - 2003-10-13 PY - 2003 SN - 4-89114-036-4 SP - 46 EP - 49 PB - IEICE CY - T¯oky¯o AN - OPUS4-2887 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang A1 - Kohlhoff, Harald A1 - Niemann, Joachim T1 - Das BAM-Monitoringsystem zur Überwachung der äußeren Betonbrücken im neuen Lehrter Bahnhof in Berlin T2 - 21. GESA-Symposium 2003 CY - Braunschweig, Deutschland DA - 2003-06-12 PY - 2003 SN - 3-18-091757-1 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1757 SP - 233 EP - 243 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-2889 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang T1 - Faseroptische Sensoren für Deformationsmessungen - Kriterien für eine zuverlässige Nutzung T2 - 21. GESA-Symposium 2003 CY - Braunschweig, Deutschland DA - 2003-06-12 PY - 2003 SN - 3-18-091757-1 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1757 SP - 141 EP - 158 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-2890 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang ED - Natau, O. ED - Fecker, E. ED - Pimentel, E. T1 - Long-term monitoring of 4500 kN rock anchors in the Eder gravity dam using fibre-optic sensors T2 - International Symposium on Geotechnical Measurements and Modelling CY - Karlsruhe, Germany DA - 2003-09-23 PY - 2003 SN - 90-5809-603-3 SP - 347 EP - 354 PB - Balkema CY - Lisse AN - OPUS4-2891 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pötsche, P. A1 - Bhattacharyya, A. R. A1 - Janke, A. A1 - Goering, Harald T1 - Conductive polymers by filling polymer melts with carbon nanotubes T2 - 2. Tagung Nanofair 2003 CY - Dresden, Germany DA - 2003-11-20 KW - Nanocomposites KW - Melt mixing KW - Condutivity PY - 2003 SN - 3-18-091803-9 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1803 SP - 201 EP - 204 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-2893 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rücker, Werner A1 - Rohrmann, Rolf A1 - Said, Samir A1 - Schmidt, Wolfgang ED - Feltrin, G. ED - Wenk, T. T1 - Dynamische Verfahren zur Sicherheitsüberwachung von Brückenbauwerken N2 - Referat: Nach dem gegenwärtigen Stand der Prognosen wird in den nächsten 10 bis 15 Jahren eine Zunahme des Güterverkehrs in Deutschland um 50 % angenommen. Im Jahre 2001 wurden 85 % aller transportierten Güter auf der Straße bewegt. Dies bedeutet, daß die vorhandenen Ingenieurbauwerke innerhalb der Verkehrsinfrastruktur mit zunehmendem Alter immer höhere Belastungen ertragen müssen. Zum anderen werden die zur Verfügung stehenden Mittel zum Ersatz dieser Infrastrukturbauwerke immer geringer. Eine aktuelle Bewertung dieser Bauwerke bezüglich ihrer Sicherheit und Gebrauchsfähigkeit erfordert deshalb zusätzliche Informationen hinsichtlich Art und Umfang eventuell vorhandener Schäden, deren Auswirkung auf die aktuelle Tragwirkung und Tragfähigkeit sowie Information über die vergangenen, gegenwärtigen und zukünftigen Lasteinwirkungen. T2 - D-A-CH-Tagung 2003 CY - Zürich, Schweiz DA - 2003-09-18 KW - Tragfähigkeit von Brücken KW - Dynamische Untersuchungen KW - Dauerüberwachung KW - Verkehrslasten KW - baulicher Zustand PY - 2003 UR - http://www.baufachinformation.de/aufsatz.jsp?ul=05029003231 SN - 3-908483-74-3 SP - 35 EP - 42 PB - SIA CY - Zürich AN - OPUS4-2850 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bohse, Jürgen T1 - Schallemission von verstärkten Polymeren T2 - 14. Kolloquium Schallemission CY - Berlin, Deutschland DA - 2003-03-27 KW - Schallemission KW - Verstärkte Polymere PY - 2003 UR - http://www.dgzfp.de/Portals/24/PDFs/Bbonline/BB_82-CD/pdfs/V07Bohse.pdf SN - 3-931381-41-2 N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 82-CD SP - 61 EP - 72 PB - DGZfP CY - Berlin AN - OPUS4-2853 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Onel, Yener A1 - Illerhaus, Bernhard A1 - Goebbels, Jürgen T1 - Experiences in using a 320 kV micro focus X-ray tube and a large sized amorphous silicon detector for 3D-CT N2 - A novel 3D-CT scanner was set up at BAM to extend the applicability of the X-ray transmission microtomography (µ-CT) to specimens up to 30 cm in diameter. The scanner consists of a bipolar 320 kV micro focus tube and a flat panel detector of amorphous silicon. Minimisation of scattered radiation, control of room and system temperature, and corrective preprocessing on the projection data are necessary to achieve expectable CT images. Statistical evaluations to show the limits and results of CT investigations are reported. T2 - International Symposium on Computed Tomography and Image Processing for Industrial Radiology CY - Berlin, Germany DA - 2003-06-23 PY - 2003 UR - http://www.ndt.net/article/ct2003/v06/v06.htm SN - 3-931381-48-X N1 - Serientitel: DGZfP-Proceedings BB – Series title: DGZfP-Proceedings BB IS - 84-CD SP - 53 EP - 59 PB - DGZfP CY - Berlin AN - OPUS4-2875 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Banach, Ulrich A1 - Noske, Reinhard A1 - Krüger, U. ED - Baselt, J. P. T1 - Vom Einzelsensor zum Sensor-Array T2 - 6. Dresdner Sensor-Symposium - Sensoren für zukünftige Hochtechnologien und Neuentwicklungen für die Verfahrenstechnik CY - Dresden, Deutschland DA - 2004-12-08 KW - On-line Sensorik KW - Multigas-Sensorik KW - Elektronische Nase KW - Mustererkennung KW - Geruchs-Sensorik PY - 2004 SN - 3-935712-92-8 N1 - Serientitel: Dresdner Beiträge zur Sensorik – Series title: Dresdner Beiträge zur Sensorik IS - 20 SP - 131 EP - 134 PB - w.e.b. Universitätsverlag CY - Dresden AN - OPUS4-2877 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Erhard, Anton T1 - Verbesserung der Mischnahtprüfung durch modellgestützte Prüfsystem-Optimierung T2 - Seminar des FA Ultraschallprüfung CY - Saarbrücken, Deutschland DA - 2003-11-03 KW - Ultraschall-Mischnahtprüfung KW - Rechenmodell PY - 2003 UR - http://www.dgzfp.de/Portals/24/PDFs/Bbonline/BB_87-CD/pdfs/V_14_Erhard.pdf SN - 3-931381-52-8 N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 87-CD SP - 83 EP - 92 PB - DGZfP CY - Berlin AN - OPUS4-2879 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sickert, Roland A1 - Knöppchen, Andreas T1 - Funkenerosionsanlage zur Kalibrierfehlerherstellung T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2003 CY - Mainz, Deutschland DA - 2003-05-26 PY - 2003 UR - http://www.ndt.net/article/dgzfp03/papers/p17/p17.htm SN - 3-931381-47-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 83-CD SP - 1 EP - 3(?) PB - DGZfP CY - Berlin AN - OPUS4-2880 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Shimamura, Aki A1 - Hübert, Thomas A1 - Thust, H. T1 - Sol-Gel-Based Materials for Thin Film Resistors T2 - 48. Internationales Wissenschaftliches Kolloquium CY - Ilmenau, Deutschland DA - 2003-09-22 PY - 2004 SN - 0943-7207 SP - 325 EP - 326 PB - Technische Universität Ilmenau CY - Ilmenau AN - OPUS4-2883 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang ED - Udd, E. T1 - Fiber optic sensors for deformation measurements - criteria and method to put them to the best possible use T2 - Conference 2004 CY - San Diego, CA, USA DA - 2004-03-15 KW - Fiber optic sensor KW - Reliability KW - Long-term stability KW - Structure monitoring KW - Materials investigation KW - Guidelines KW - Validation PY - 2004 SN - 0-8194-5301-3 DO - https://doi.org/10.1117/12.539801 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 5384 SP - 158 EP - 168 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-3845 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hofmann, Detlef A1 - Basedau, Frank A1 - Habel, Wolfgang A1 - Gloetzl, R. ED - López-Higuera, J. M. T1 - Lightning-safe diaphragm pressure gauge for geotechnical applications using a long-term reliable absolute EFPI sensor T2 - 2nd European Workshop on Optical Fibre Sensors ; 2nd EWOFS '04 CY - Santander, Spain DA - 2004-06-09 KW - Pressure sensor KW - Fibre Fabry-Pérot interferometer KW - Geotechnical application KW - Precise deformation measurement KW - Long-term stability PY - 2004 SN - 0-8194-5434-6 DO - https://doi.org/10.1117/12.566543 SN - 0038-7355 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 5502 SP - 128 EP - 131 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-3844 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gardei, André A1 - Mittag, Kornelia A1 - Wiggenhauser, Herbert A1 - Ripke, B. A1 - Jovanovic, M. T1 - Inspection of Concrete-Embedded Tracks Process development for the quality assurance of concrete-embedded tracks using non-destructive testing methods N2 - In the framework of the feasibility study "Inspection of Concrete-Embedded Tracks" between BAM and Deutscher Bahn AG, application and further development of NDT- measurements for the constructional conditions of the concrete-embedded tracks are investigated. After first test series on the rail track [Ref 1] and in further laboratory investigations on test specimen [Ref 2], result of the three selected non-destructive methods impact- echo, ultrasonic-echo and impulse radar will be presented. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/v086/v086.htm SN - 3-931381-49-8 PB - DGZfP CY - Berlin AN - OPUS4-3975 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Burkert, Andreas A1 - Fischer, Joachim A1 - Eich, Gerd T1 - Corrosion Monitoring im Stahlbetonbau T2 - 12. Sommerkurs Werkstofftechnik "Werkstoffentwicklung - Werkstoffanwendung" CY - Magdeburg, Deutschland DA - 2004-09-03 KW - Stahlbetonbau KW - Bewehrungsstahlkorrosion KW - Elektrochemische Untersuchungsmethoden PY - 2004 SN - 3-929757-72-9 SP - 57 EP - 72 PB - Univ. CY - Magdeburg AN - OPUS4-3970 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bohse, Jürgen A1 - Krietsch, Torsten A1 - Chen, J. H. A1 - Brunner, A. J. ED - Williams, J. G. ED - Pavan, A. T1 - Acoustic emission analysis and micro-mechanical interpretation of mode I fracture toughness tests on composite materials N2 - Mode I fracture toughness tests on Double Cantilever Beam specimens from carbon-fibre and glassfibre reinforced polymer-matrix composites were monitored with Acoustic Emission (AE) and loaddisplacement traces and delamination lengths were recorded. AE characterized the kinetics of delamination propagation. The progress of AE activity and AE intensity with load and AE source location plots are used to determine the delamination onset on the microscopic and macroscopic scale. Energy dissipating processes initiated in the damage zone near the delamination tip. Low Interface adhesion results in lower debonding stresses and larger damage zones compared with composites with good adhesion. Time-dependent linear location of AE sources yields the average length of the damage zone and the average speed of delamination propagation. Parameter analysis has been used empirically for identifying AE source mechanisms. A new Classification Software for transient AE waveforms permits identification of the source mechanism of individual AE signals. A micro-mechanical fracture model based on the AE results describes the contributions of microscopic matrix and Interface mechanisms to the interlaminar fracture energy. T2 - 2nd ESIS TC4 Conference on Fracture of Polymers, Composites, and Adhesives CY - Les Diablerets, Switzerland DA - 13.09.1999 KW - Mode I KW - DCB test KW - Acoustic emission analysis KW - Polymer composites KW - Damage zone KW - Micro-mechanisms KW - Interface adhesion KW - Micro-mechanical fracture model KW - Interlaminar fracture energy PY - 2000 SN - 0-08-043710-9 SN - 1566-1369 N1 - Serientitel: ESIS publication – Series title: ESIS publication IS - 27 SP - 15 EP - 26 PB - Elsevier CY - Amsterdam AN - OPUS4-4153 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Heyn, Andreas A1 - Göllner, J. A1 - Altendorf, S. A1 - Burkert, Andreas T1 - Instrumentierter Salzsprühtest T2 - 12. Sommerkurs Werkstofftechnik "Werkstoffentwicklung - Werkstoffanwendung" CY - Magdeburg, Deutschland DA - 2004-09-03 KW - Salzsprühnebeltest KW - Elektrochemisches Rauschen KW - Korrosion PY - 2004 SN - 3-929757-72-9 SP - 287 EP - 298 PB - Univ. CY - Magdeburg AN - OPUS4-4121 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Häcker, Ralf A1 - Wossidlo, Peter ED - Pohl, M. T1 - Der Einfluss der Belastungsgeschwindigkeit im Zugversuch auf die Anforderungen an die Messtechnik und auf das Probenverhalten T2 - Werkstoffprüfung - Konstruktion, Qualitätssicherung und Schadensanalyse CY - Neu-Ulm, Deutschland DA - 2004-11-25 KW - Werkstoffprüfung KW - Dynamischer Zugversuch KW - Messtechnik KW - Fließkurve KW - Spannungs-Dehnungskurve PY - 2004 SN - 3-88355-337-9 SP - 61 EP - 66 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-5057 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias ED - Kollenberg, W. T1 - Tribologisches Verhalten PY - 2004 SN - 3-8027-2927-7 SP - 76 EP - 85 PB - Vulkan CY - Essen AN - OPUS4-5154 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, L.-M. A1 - Woydt, Mathias A1 - Keller, H. A1 - Zimmermann, S. A1 - Schwier, G. A1 - Enzl, R. A1 - Thiele, S. T1 - Tribological behaviour of HVOF-sprayed Cr3C2-NiCr and TiC-based coatings under high temperature dry sliding conditions N2 - In the current study, the tribological properties of TiC-based coatings paired with polycrystalline alumina under unlubricated sliding conditions were investigated in order to demonstrate the technological and engineering potential of such coatings. (Ti,Mo)(C,N)-Co coatings were prepared from an agglomerated and sintered spray powder by HVOF spraying using JP-5000 equipment. Cr3C2-NiCr coatings were studied for comparison. Sliding wear tests were performed over the temperature range from 23°C to 800°C with sliding speeds in the range 0.3-3 m/s, a wear distance of 5000 m and a normal force of 10 N. Wear rates of coatings and sintered alumina counterparts were measured separately. Compared with Cr3C2-NiCr coatings, (Ti,Mo)(C,N)-Co coatings showed significantly lower total wear rates, corresponding to those found in the region of mixed/boundary lubrication. With few exceptions, the coefficients of friction were found to be lower for (Ti,Mo)(C,N)-Co coatings than for Cr3C2-NiCr coatings. After tests were performed, the coating microstructures were studied by optical microscopy and SEM. The oxide scales formed on the coating surfaces were investigated by SEM and X-ray diffraction. Comparison of the total wear rates of the couples consisting of sintered alumina and a (Ti,Mo)(C,N)-Co coating with those of other alumina-ceramic and hardmetal-hard metal tribological systems demonstrates the immense potential of TiC-based coatings for sliding wear applications. T2 - International Thermal Spray Conference & Exposition 2004 CY - Osaka, Japan DA - 2004-05-10 PY - 2004 SN - 3-87155-792-7 SP - 1(?) EP - 10(?) PB - DVS-Verl. CY - Düsseldorf AN - OPUS4-5123 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kloß, Heinz A1 - Santner, Erich A1 - Dmitriev, Andrey A1 - Psakhie, Serguei A1 - Shilko, E. T1 - Simulationsrechnungen mit der Methode der beweglichen zellularen Automaten (bzA) für eine Verschleißprognose metallischer Werkstoffe T2 - Tribologie-Fachtagung 2004 CY - Göttingen, Deutschland DA - 2004-09-27 PY - 2004 SN - 3-00-015053-6 PB - Ges. für Tribologie CY - Moers AN - OPUS4-5127 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Spaltmann, Dirk A1 - Löhr, Manuel A1 - Binkowski, Sigrid A1 - Kelling, Norbert A1 - Woydt, Mathias T1 - Können harte DLC-Schichten die Wälzbeständigkeit von weichen Stählen erhöhen? T2 - Tribologie-Fachtagung 2004 CY - Göttingen, Deutschland DA - 2004-09-27 PY - 2004 SN - 3-00-015053-6 SP - 1(?) EP - 10(?) PB - Ges. für Tribologie CY - Moers AN - OPUS4-5143 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mc Hugh, Jarlath A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Erhard, Anton T1 - Characterisation of epoxy materials used in the development of ultrasound arrays T2 - 16th World Conference on Nondestructive Testing CY - Montreal, Canada DA - 2004-08-30 PY - 2004 UR - http://www.ndt.net/article/wcndt2004/pdf/materials_characterization/616_mchugh.pdf SP - 8 pages PB - International Committee for Non-Destructive Testing CY - Montreal AN - OPUS4-5215 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Krause, Martin A1 - Rieck, C. A1 - Hillemeier, B. T1 - Materialuntersuchung an Holz mit niederfrequenter Ultraschall-Echotechnik N2 - Kurzfassung Die Anwendung niederfrequenter Ultraschall-Echotechnik mit Longitudinal- und Transversalwellen für die Materialuntersuchung von Holzbauteilen wird beschrieben. Weiterhin wird der Einfluss der Holzfasern auf die Schallgeschwindigkeiten und Oberflächenwellen an Hand von Messergebnissen aufgezeigt. Die Leistungsfähigkeit des Ultraschall-Echoverfahrens an ungeschädigten Holzkörpern und Körpern mit eingebrachten Bohrungen in Faserrichtung (Kernfäulnissimulation) wird dargestellt. Es ist zudem möglich, bei koppelmittelfreier Ankopplung mit Transversalwellen indirekt Fäulnis von der ungeschädigten Bauteilseite aus zu orten. Als Referenzverfahren werden die Bohrwiderstandsmethode oder die Röntgendurchstrahlung eingesetzt. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/v87/v87.htm SN - 3-931381-55-2 SP - 1(?) EP - 9(?) PB - DGZfP CY - Berlin AN - OPUS4-5216 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Osterloh, Kurt A1 - Robbel, Joachim A1 - Krause, Martin A1 - Ewert, Uwe A1 - Hillemeier, B. T1 - Mobile Röntgenblitzröhren zum Auffinden von Holzschäden N2 - In diesem Beitrag wird die Anwendung von Radiographiesystemen zum Auffinden von Holzschäden beschrieben. Die Anlage besteht aus einer mobilen Röntgenblitzröhre und einem digitalen Radiographiesystem mit Speicherfolie oder einem Flachdetektor. An Hand der durchgeführten Versuche an Laub- und Nadelbäumen sowie an Eichenbalken der Marienkirche der Lutherstadt- Wittenberg wird die Detektion innerer Schäden gezeigt. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/p15/p15.htm SN - 3-931381-55-2 SP - 1(?) EP - 8(?) PB - DGZfP CY - Berlin AN - OPUS4-5217 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wendrich, Astrid A1 - Maierhofer, Christiane A1 - Kuritz, Matthias A1 - Köpp, Christian T1 - Aufbau eines historischen Mauerwerkskörpers ("Obelix") zur Bewertung von zerstörungsfreien Verfahren N2 - Zusammenfassung Auf dem Gelände der BAM entstand im Frühjahr 2003 ein Probekörper, der die Verbindung bildet zwischen Laborprüfkörpern und realen Bauwerken aus Mauerwerk. Er dient der Validierung und Weiterentwicklung von zerstörungsfreien Prüfverfahren zur Untersuchung von historischem Mauerwerk. Dabei wurde große Sorgfalt auf die Materialauswahl und den strukturellen Aufbau gelegt. Die Materialien sollten denen von realen, historischen Bauwerken entsprechen. Der strukturelle Aufbau ergibt sich aus praxisrelevanten Fragestellungen. Der Probekörper steht auch anderen Arbeitsgruppen für Verfahrensvalidierungen zur Verfügung. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 KW - Historic masonry KW - Test specimen KW - Validation KW - Non-destructive testing PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/p40/p40.htm SN - 3-931381-55-2 SP - 1 EP - 11(?) PB - DGZfP CY - Berlin AN - OPUS4-5199 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Haardt, P. A1 - Krause, Martin A1 - Streicher, Doreen A1 - Krause, H.-J. ED - Watanabe, E. ED - Frangopol, D. T1 - Scanning NDT-Methods for the Inspection of Highway Structures T2 - 2nd International Conference on Bridge Maintenance, Safety and Management CY - Kyoto, Japan DA - 2004-10-19 KW - ZfPBau KW - Ingenieurbauwerke KW - Automatisierung KW - Laserscanner KW - Ultraschallecho KW - Impuls Radar KW - Impact-Echo PY - 2004 SN - 90-5809-680-7 SP - 8 pages PB - Balkema CY - Leiden AN - OPUS4-5201 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mc Hugh, Jarlath A1 - Döring, Joachim A1 - Erhard, Anton A1 - Stark, Wolfgang A1 - Raab, S. T1 - Einfluss hoher Temperaturen und Drücke auf die Ultraschalleigenschaften eines Komposit-Prüfkopfes T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/p12/p12.htm SN - 3-931381-55-2 SP - 1 EP - 7(?) PB - DGZfP CY - Berlin AN - OPUS4-5214 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Redmer, Bernhard A1 - Ewert, Uwe A1 - Rädel, Christoph A1 - Zscherpel, Uwe A1 - Likhatchov, A.V. A1 - Pickalov, V.V. T1 - Mobiler Einsatz digitaler Röntgen-Detektoren zur tomografischen Visualisierung flächiger Fehler im Anlagenbereich T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 KW - Digitale Radiologie KW - Zeilenkamera KW - Flächendetektor KW - Laminografie KW - Mobile Anwendungen PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/v62/v62.htm SN - 3-931381-55-2 SP - 1(?) EP - 9(?) PB - DGZfP CY - Berlin AN - OPUS4-5227 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Streicher, Doreen A1 - Wiggenhauser, Herbert A1 - Haardt, P. A1 - Holst, R. ED - Alampalli, S. T1 - Non-destructive Testing of a Post tensioned Concrete Bridge Applying an Automated Measuring System T2 - 6th NDT Conference: Structural Materials Technology CY - Buffalo, NY, USA DA - 2004-09-14 KW - Ultrasonic-echo KW - Impact-echo KW - Impulse radar KW - Tendon ducts KW - Automated measuring KW - Imaging PY - 2004 SN - 1-571-17150-9 VL - 6 SP - 488 EP - 495 PB - American Society for Nondestructive Testing CY - Columbus, Ohio AN - OPUS4-5229 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Daum, Werner ED - Koike, Y. T1 - Standards and Specifications for POF Characterisation T2 - 13th International Plastic Optical Fibres Conference 2004 CY - Nuremberg, Germany DA - 2004-09-27 KW - Plastic optical fibres KW - Standards KW - Specification KW - Testing KW - Characterisation PY - 2004 SN - 3-905084-70-8 SP - 133 EP - 139 PB - AKM Congress Service CY - Basel AN - OPUS4-5231 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Arndt, Ralf A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Weritz, Friederike A1 - Wiggenhauser, Herbert T1 - Ortung von Putzablösungen auf Beton und Mauerwerk mit der Puls-Phasen-Thermografie N2 - Abstract In the recent years the application of infrared thermography and especially its active approaches lock-in thermography, impulse themography and pulse phase thermography (PPT) has gained more importance for non-destructive testing (NDT). In this paper it is demonstrated that PPT is very well suited for NDT in civil engineering. The method is based on pulse heating of the investigated specimen and on the observation of the cooling down process on its surface with an infrared camera. The transient behaviour is afterwards analysed with Fast Fourier Transformation, enabling the creation of phase and amplitude images with enhanced visualisation of the defects. Results of European and National (i.e. DFG) funded projects are presented, for example the detection of voids and inhomogeneities close to the surface and the localisation of delaminations on plastered concrete and masonry specimen. ZUSAMMENFASSUNG Im Rahmen eines von der Deutschen Forschungsgemeinschaft geförderten Vorhabens zur zerstörungsfreien Prüfung im Bauwesen wird in der Bundesanstalt für Materialforschung und -prüfung (BAM) in Zusammenarbeit mit der Technischen Universität Berlin (TUB) die Puls-Phasen-Thermografie (PPT) weiterentwickelt, bewertet und eingesetzt. Die durch die Impuls-Thermografie (IT) aufgenommenen Daten werden mittels Fast Fourier Transformation (FFT) bearbeitet. Die durch die FFT gewonnenen Phasenbilder reduzieren die Störeinflüsse von Oberflächeninhomogenitäten und ungleichmäßiger Erwärmung. Die dargestellten Ergebnisse zeigen deutlich, dass sich die PPT sehr gut zur zerstörungsfreien Prüfung im Bauwesen eignet. Insbesondere Inhomogenitäten im oberflächennahen Bereich, wie Ablösungen und Hohlstellen hinter Beschichtungen (Putz, CFK-Laminate etc.), aber auch Defekte in größeren Tiefen können zuverlässig geortet und bildgebend dargestellt werden. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 KW - Puls-Phasen-Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Putz auf Beton und Mauerwerk KW - Ortung von Fehlstellen und Ablösungen PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/v89/v89.htm SN - 3-931381-55-2 SP - 1(?) EP - 10(?) PB - DGZfP CY - Berlin AN - OPUS4-5285 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Casperson, Ralf A1 - Thomas, Hans-Martin A1 - Pohl, Rainer T1 - Wirbelstromprüfung an Eisenbahnschienen - Integration der Wirbelstromtechnik in Ultraschallprüfzüge T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 KW - Wirbelstromprüfung an Eisenbahnschienen KW - Schienenprüfzug PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/v72/v72.htm SN - 3-931381-55-2 SP - 1(?) EP - 5(?) PB - DGZfP CY - Berlin AN - OPUS4-5290 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pohl, Rainer A1 - Krull, R. A1 - Meierhofer, R. A1 - Rühe, S. T1 - Wirbelstromprüfung im Schienenschleifzug T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 KW - Wirbelstromprüfung KW - Schienenschleifen KW - Head checks KW - Belgrospis PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/v70/v70.htm SN - 3-931381-55-2 SP - 1(?) EP - 6(?) PB - DGZfP CY - Berlin AN - OPUS4-5292 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hübert, Thomas A1 - Banach, Ulrich T1 - Qualitätsmanagement in der Feuchtemesstechnik T2 - Feuchtetag 2004 ; Workshop Onsiteformasonry 2004 CY - Berlin, BAM, Deutschland DA - 2004-11-18 PY - 2004 SN - 3-931381-59-5 N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 91-CD SP - 63 EP - 69 PB - DGZfP CY - Berlin AN - OPUS4-5296 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wernecke, R. A1 - Hübert, Thomas T1 - Industrielle Spurenfeuchtemessung nach dem coulometrischen Messverfahren T2 - Temperatur 2003 CY - Berlin, Deutschland DA - 2003-09-08 PY - 2004 SN - 3-18-091784-9 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1784 SP - 93 EP - 98 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-5302 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wüstenberg, Hermann A1 - Nabel, Eberhard A1 - Neumann, Eberhard A1 - Kutzner, Jürgen A1 - Mundry, Eberhard T1 - In-service Inspection of Nuclear Power Plant Components - An Opportunity to perfect Ultrasonic Non-Destructive Test Methods T2 - Symposium on the Reliability of Nuclear Power Plants CY - Innsbruck, Austria DA - 1975-04-14 PY - 1975 SN - 92-0-050075-7 SN - 0074-1876 N1 - Serientitel: STI PUB : Proceedings series – Series title: STI PUB : Proceedings series IS - 403 SP - 603 EP - 614 PB - International Atomic Energy Agency CY - Vienna AN - OPUS4-8328 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wackerbauer, K. A1 - Tödt, Fritz A1 - Graff, M. A1 - Teske, Günter T1 - Kontinuierliche Sauerstoffmessung in Würze und Bier mit elektrochemisch-potentiostatischer Messanordnung T2 - European Brewery Convention CY - Nice, Frankreich DA - 1975-01-01 PY - 1975 SN - 0-444-41364-2 SP - 757 EP - 790 PB - Elsevier CY - Amsterdam AN - OPUS4-8309 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ziegler, Kurt ED - Eichmeyer, H. T1 - Über die Berechnung der Bohrgeschwindigkeit beim drehenden Kleinkaliberbohren T2 - Schacht- und Tunnelbau-Kolloquium CY - Berlin, Deutschland DA - 1975-05-02 PY - 1975 SN - 3-7983-0549-8 SP - 139 EP - 147 PB - Universitätsbibliothek d. Techn. Univ. Berlin, Abt. Publikationen CY - Berlin AN - OPUS4-8256 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kuhlow, Berndt A1 - Nabel, Eberhard A1 - Mundry, Eberhard A1 - Neumann, Eberhard A1 - Wüstenberg, Hermann T1 - Ultrasonic Testing of Austenitic Steel Weld Joints T2 - Symposium on the Reliability of Nuclear Power Plants CY - Innsbruck, Austria DA - 1975-04-14 PY - 1975 SN - 92-0-050075-7 SN - 0074-1876 N1 - Serientitel: STI PUB : Proceedings series – Series title: STI PUB : Proceedings series IS - 403 SP - 569 EP - 575 PB - International Atomic Energy Agency CY - Vienna AN - OPUS4-8317 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Sakurai, T. T1 - Film Failure of Sliding Hertzian Contacts - The Influence of Contact Geometry T2 - JSLE-ASLE International Lubrication Conference CY - Tokyo, Japan DA - 1975-06-09 PY - 1976 SN - 0-444-41434-7 SP - 203 EP - 212 PB - Elsevier CY - Amsterdam AN - OPUS4-8294 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schrimmer, Peter ED - Dittrich, O. T1 - Keilriemengetriebe PY - 1974 SN - 3-7830-0091-2 VL - 3 SP - 163 EP - 187 PB - Krausskopf CY - Mainz AN - OPUS4-7953 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schrimmer, Peter ED - Dittrich, O. T1 - Zahnriemengetriebe PY - 1974 SN - 3-7830-0091-2 VL - 3 SP - 188 EP - 205 PB - Krausskopf CY - Mainz AN - OPUS4-7954 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pohl, Heinz ED - Zimmermann, M. T1 - Nickel in Elektrolyt- und Hüttenkupfer sowie in Kupferlegierungen PY - 1974 IS - C-14d SP - 1 EP - 3 PB - Wiss. Verl.-Ges. CY - Stuttgart AN - OPUS4-7971 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pohl, Heinz ED - Zimmermann, M. T1 - Nickel in Reinst-Kobalt und Hütten-Kobalt PY - 1974 IS - C-14e SP - 1 EP - 3 PB - Wiss. Verl.-Ges. CY - Stuttgart AN - OPUS4-7972 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pohl, Heinz ED - Zimmermann, M. T1 - Nickel in unlegierten bis hochlegierten Stählen, Guß- und Roheisen PY - 1974 IS - D-5 SP - 1 EP - 3 PB - Wiss. Verl.-Ges. CY - Stuttgart AN - OPUS4-7974 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rühl, Karl H. T1 - Stahlbau und Sprödbruchfragen PY - 1958 SP - 61 EP - 63 PB - Stahlbau-Verl. CY - Köln AN - OPUS4-7742 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Günther T1 - Themen und Ergebnisse der von der Arbeitsgemeinschaft Industrieller Forschungsvereinigungen (AIF) geförderten Holzforschung PY - 1974 SP - 92 EP - 101 PB - Dt. Wirtschaftsdienst CY - Köln AN - OPUS4-8045 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böttcher, Bernhard ED - Müller, E. A. W. T1 - Wärmeflußverfahren - Physikalische Grundlagen PY - 1975 IS - Abschnitt B.4 SP - 1 EP - 10 PB - Oldenbourg CY - München AN - OPUS4-7977 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mirisch, Günter A1 - Kuschel, J. T1 - Wärmeübertragungsmedien T2 - Tagung Wärmeübertragungsanlagen mit organischen Wärmeträgern CY - Ulm, Deutschland DA - 1974-05-16 PY - 1974 SN - 3-18-090216-7 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 216 SP - 11 EP - 17 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-8000 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Paatsch, Wolfgang T1 - Probleme der Wasserstoffversprödung unter besonderer Berücksichtigung galvanotechnischer Prozesse T2 - VDI-Tagung - Das Verhalten mechanisch beanspruchter Werkstoffe und Bauteile unter Korrosionseinwirkung CY - Lindau, Deutschland DA - 1975-04-17 PY - 1975 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 235 SP - 97 EP - 101 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-8176 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dolling, Hans-Joachim ED - Savidis, S. T1 - Zur Abschirmung von U-Bahn-Schwingungen durch einen Gleistrog PY - 1975 SN - 3-7983-0544-7 SP - 15 EP - 29 PB - TU Berlin CY - Berlin AN - OPUS4-8197 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Holzlöhner, Ulrich ED - Savidis, S. T1 - Ebene Deformation von Sand PY - 1975 SN - 3-7983-0544-7 SP - 73 EP - 97 PB - TU Berlin CY - Berlin AN - OPUS4-8198 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wieser, Karol E. T1 - Beurteilungsverfahren der Bundesanstalt für Materialprüfung und der Technischen Überwachungs-Vereine für Behälter zur Lagerung brennbarer Flüssigkeiten PY - 1975 SN - 3-18-404010-0 SP - 143 EP - 157 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-8168 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wapler, D. ED - Freund, H. ED - Boguth, W. ED - Grehn, J. T1 - Interferenzmikroskopische Untersuchung des Verlaufens von Anstrichen PY - 1975 SN - 3-524-00360-5 PB - Umschau-Verl. CY - Frankfurt/Main AN - OPUS4-8211 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Hans-Joachim A1 - Simon, Götz T1 - Untersuchungen zur Weiterentwicklung des Buckelschweißverfahrens T2 - 10. Stuttgarter Sondertagung "Widerstandsschweißen" CY - Esslingen, Deutschland DA - 1975-03-05 PY - 1975 SN - 3-87155-334-4 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 35 SP - 51 EP - 60 PB - Dt. Verl. für Schweißtechnik CY - Düsseldorf AN - OPUS4-8343 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Hans-Joachim T1 - Einfluß der Streuungen der Grundwerkstoffeigenschaften auf die Spannweite der Gütemerkmale beim Punktschweißen T2 - 10. Stuttgarter Sondertagung "Widerstandsschweißen" CY - Esslingen, Deutschland DA - 1975-03-05 PY - 1975 SN - 3-87155-334-4 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 35 SP - 112 EP - 122 PB - Dt. Verl. für Schweißtechnik CY - Düsseldorf AN - OPUS4-8344 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nagel, Dieter ED - Lehrheuer, W. T1 - Einfluß von Fehlern in der Lötnaht auf die mechanischen Eigenschaften von Hochtemperatur-Lötverbindungen T2 - Kolloquium Entwicklungsstand und Anwendungsmöglichkeiten neuzeitlicher Schweiß-, Löt- und Prüftechnologien CY - Jülich, Deutschland DA - 1975-12-01 PY - 1975 SN - 3-87155-337-9 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 38 SP - 164 EP - 168 PB - Dt. Verl. f. Schweißtechnik CY - Düsseldorf AN - OPUS4-8345 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Oelsner, Günter ED - Grimme, D. T1 - Grundlagen der atmosphärischen Korrosion T2 - 2. Korrosionum CY - Düsseldorf, Deutschland DA - 1976-01-14 PY - 1976 SN - 3-514-00187-1 SP - 33 EP - 47 PB - Verlag Stahleisen CY - Düsseldorf AN - OPUS4-8376 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Preß, Henning A1 - Schönherr, Wolfgang T1 - Grenzen der Schneidgeschwindigkeit beim Brennschneiden von Stahl T2 - Große Schweißtechnische Tagung CY - Hannover, Deutschland DA - 1975-10-08 PY - 1975 SN - 3-87155-335-2 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 36 SP - 73 EP - 79 PB - Dt. Verl. für Schweißtechnik (DVS) CY - Düsseldorf AN - OPUS4-8346 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Preß, Henning T1 - Schadstoffkonzentrationen und Schallpegel beim Plasmaschneiden T2 - III. Kolloquium "Physik und Technologie des Plasmastrahls in der Schweiß-, Schneid- und Spritztechnik" CY - Aachen, Deutschland DA - 1975-03-20 PY - 1975 SN - 3-87155-336-0 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 37 SP - 65 EP - 71 PB - Dt. Verl. für Schweißtechnik CY - Düsseldorf AN - OPUS4-8347 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ruske, Walter T1 - Wirtschaftspolitik, Unternehmertum und Wissenschaft am Beispiel der chemischen Industrie Berlins im 19. Jahrhundert PY - 1976 N1 - Serientitel: Studien zu Naturwissenschaft, Technik und Wirtschaft im Neunzehnten Jahrhundert – Series title: Studien zu Naturwissenschaft, Technik und Wirtschaft im Neunzehnten Jahrhundert IS - 3 SP - 694 EP - 715 PB - Vandenhoeck und Ruprecht CY - Göttingen AN - OPUS4-8354 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schickert, Gerald T1 - Mehraxiale Betonfestigkeit - Überwachung: Sicherheit von Kraftwerken (Informationsschrift) T2 - Kongreß Rationelle Energienutzung in Ballungsgebieten CY - Berlin, Deutschland DA - 1976-09-20 PY - 1977 SN - 3-7678-0430-1 VL - 1976 SP - 1(?) EP - 6(?) CY - Berlin AN - OPUS4-8388 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schulz-Forberg, Bernd T1 - Thermal test methods and experience in the Federal Republic of Germany T2 - Seminar on Transport Packaging for Radioactive Materials CY - Vienna, Austria DA - 1976-08-23 PY - 1976 SN - 92-0-020576-3 SN - 0074-1876 N1 - Serientitel: STI PUB – Series title: STI PUB IS - 437 SP - 467 EP - 479 PB - International Atomic Energy Agency CY - Vienna AN - OPUS4-8368 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Trapper, Joachim T1 - European Cylinder Regulations PY - 1976 VL - May-June SP - 10 EP - 14 CY - Washington, DC AN - OPUS4-8458 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Günther ED - Sharpley, J. T1 - Physical, Chemical and Biological Factors Influencing the Damage of Wood and other Materials by Termites N2 - Termites are one of the main insects that destroy materials. Physical, Chemical, and biological factors influencing the damage to wood and other materials by termites are discussed. Within the physical factors, environmental influences of temperature, humidity, and electromagnetic field conditions and material properties of hardness, surface, and internal structure and thickness of foils and fibres should be observed. The Chemical factors involved are sensorial influences such as repellency, attraction, and Stimulation and toxic influences such as toxic efficiency, effect on symbionts, and aging of effective substances. Biological factors include termite behaviour connected with gnawing activity, influence of Substrates, and choice or compulsory tests and various other biological factors such as species and race of the termites, number and composition of groups as well as vitality and developmental stage of the colony. T2 - 3rd International Biodegradation Symposium CY - Kingston, RI, USA DA - 17.08.1975 PY - 1976 SN - 0-85334-679-8 SP - 259 EP - 271 PB - Applied Science Publ. CY - London AN - OPUS4-8462 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Teske, Günter T1 - Schadstoff-Kontrolle und industrielle Konzentrationsmessungen mit neuen potentiostatischen Meßanordnungen T2 - 18. Ausstellungstagung für Chemisches Apparatewesen CY - Frankfurt am Main, Deutschland PY - 1976 SN - 3-527-10763-0 N1 - Serientitel: DECHEMA-Monographien – Series title: DECHEMA-Monographien IS - 80 SP - 727 EP - 736 PB - Verl. Chemie CY - Weinheim AN - OPUS4-8514 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pantke, Michael ED - Walters, A. H. T1 - Test methods for evaluation of susceptibility of plasticised in PVC and its components to microbial attack PY - 1976 SN - 0-85334-696-8 PB - Applied Science Publ. CY - London AN - OPUS4-8497 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Sakurai, T. T1 - Film Failure of Sliding Hertzian Contacts - The Influence of Contact Geometry T2 - JSLE-ASLE International Lubrication Conference CY - Tokyo, Japan DA - 1975-06-09 PY - 1976 SN - 0-444-41434-7 SP - 368 EP - 379 PB - Elsevier CY - Amsterdam AN - OPUS4-8504 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kerner-Gang, Waltraut ED - Walters, A. H. T1 - Evaluation techniques for resistance of floor coverings to mildew PY - 1977 SN - 0-85334-696-8 SP - 95 EP - 103 PB - Applied Science Publ. CY - London AN - OPUS4-8486 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kerner-Gang, Waltraut ED - Walters, A. H. T1 - Evaluation techniques for resistance of optical lenses to fungal attack PY - 1977 SN - 0-85334-696-8 SP - 105 EP - 113 PB - Applied Science Publ. CY - London AN - OPUS4-8487 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Deppe, Hans-Joachim T1 - Holzwerkstoffe in ihrer geschichtlichen Entwicklung PY - 1976 SP - 16 EP - 21 CY - Horn-Bad Meinberg AN - OPUS4-8478 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kerner-Gang, Waltraut ED - Walters, A. H. T1 - Evaluation techniques for the resistance of pipe-joint rings and sealants to microorganisms PY - 1977 SN - 0-85334-696-8 SP - 41 EP - 49 PB - Applied Science Publ. CY - London AN - OPUS4-8485 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meckel, Lothar ED - Bartholomé, E. ED - Ullmann, F. T1 - Fasern, Prüfung und Analyse PY - 1976 SN - 3-527-20011-8 N1 - Serientitel: Ullmanns Encyklopädie der technischen Chemie – Series title: Ullmanns Encyklopädie der technischen Chemie IS - 11 SP - 391 EP - 404 PB - Verl. Chemie CY - Weinheim ET - 4., neubearb. und erw. AN - OPUS4-8407 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Florian, Wolfgang T1 - Festigkeit von Mikro-Ultraschallschweißverbindungen zwischen Gold- oder Aluminiumdrähten und Halbleiterbausteinen T2 - Internationales Kolloquium Löten und Schweißen in der Elektronik CY - München, Deutschland DA - 1976-11-25 PY - 1976 SN - 3-87155-339-5 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 40 SP - 122 EP - 126 PB - Dt. Verl. für Schweißtechnik CY - Düsseldorf AN - OPUS4-8565 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kowalewsky, Helmut T1 - Correlation and applicability of different leak test methods T2 - Seminar on Transport Packaging for Radioactive Materials CY - Vienna, Austria DA - 1976-08-23 PY - 1976 SN - 92-0-020576-3 SN - 0074-1876 N1 - Serientitel: STI PUB – Series title: STI PUB IS - 437 SP - 271 EP - 277 PB - International Atomic Energy Agency CY - Vienna AN - OPUS4-8554 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mayer, Norbert A1 - Andreae, Götz A1 - Amberg, Claus T1 - Meßtechnik für die Sicherheitsbeurteilung von Druckbehältern T2 - Deutsche Industrieaustellung CY - Berlin DA - 1976-09-18 PY - 1976 SN - 3-7678-0430-1 CY - Berlin AN - OPUS4-8525 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mundry, Eberhard T1 - Zur Aussagekraft von Ultraschallprüfungen T2 - Sondertagung "Konstruktion und Fertigung im Maschinen-, Fahrzeug- und Stahlbau" CY - München, Deutschland DA - 1976-02-02 PY - 1976 SN - 3-87155-338-7 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 39 SP - 175 EP - 184 PB - DVS-Verl. CY - Düsseldorf AN - OPUS4-8536 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kretzschmar, Hans-Jürgen A1 - Groß, G. A1 - Keim, J. ED - Jones, C. E. R. ED - Cramers, C. A. T1 - Pyrolysis-Gas Chromatography and Spectroscopic Identification of Fluorine Polymers T2 - 3rd International Symposium on Analytical Pyrolysis CY - Amsterdam, The Netherlands DA - 1976-09-07 PY - 1977 SN - 0-444-41558-0 SP - 373 EP - 382 PB - Elsevier Scientific Pub. Co CY - Amsterdam AN - OPUS4-8686 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Voigtsberger, Paul ED - Mohr, U. T1 - Collection of exhaust gas condensate from petrol engines during the Europa-Test T2 - 2nd Hanover International Carcinogenesis Meeting CY - Hanover, Germany DA - 1975-10-22 PY - 1977 SN - 92-832-1116-2 SN - 0300-5038 N1 - Serientitel: IARC scientific publications – Series title: IARC scientific publications IS - 16 SP - 3 EP - 10 PB - IARC Press CY - Lyon AN - OPUS4-8695 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pastuska, Gerhard A1 - Just, Ulrich ED - Overberger, C. ED - Mark, H. ED - Pepper, D. T1 - Variation of molecular weight distribution in polyamides during processing T2 - International Symposium on Macromolecules CY - Dublin, Ireland DA - 1977-07-17 PY - 1977 SN - 0-471-05602-2 SN - 0360-8905 N1 - Serientitel: Journal of polymer science : Polymer symposia – Series title: Journal of polymer science : Polymer symposia IS - 62 SP - 597 EP - 602 PB - Wiley CY - New York AN - OPUS4-8657 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hundt, Jürgen A1 - Kantelberg, Hans A1 - Schimmelwitz, Peter T1 - Zur Wärme- und Feuchtigkeitsleitung in Beton PY - 1977 SN - 3-433-00800-0 SN - 0171-7197 N1 - Serientitel: Deutscher Ausschuß für Stahlbeton – Series title: Deutscher Ausschuß für Stahlbeton IS - 280 SP - 21 EP - 41 PB - Ernst CY - Berlin AN - OPUS4-8630 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Plank, Arno T1 - Leichtmauermörtel mit niedriger Wärmeleitfähigkeit für belastetes Mauerwerk - Arten, Eigenschaften, Grenzen der Anwendung T2 - Lehrgang CY - Düsseldorf DA - 1977-03-28 PY - 1977 N1 - Serientitel: VDI-Bildungswerk – Series title: VDI-Bildungswerk SP - 1 EP - 11 CY - Düsseldorf AN - OPUS4-8623 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Deppe, Hans-Joachim T1 - Möglichkeiten und Grenzen der Weiterentwicklung von Holzwerkstoffen PY - 1977 SN - 3-18-404028-3 SP - 13 EP - 32 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-8721 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Hans-Joachim A1 - Preß, Henning A1 - Steigleder, Bodo T1 - Einfluß der dynamischen Eigenschaften von Brennschneidmaschinen auf die Schnittgüte nach DIN 2310 T2 - Arbeitsschutz, Qualitätssicherung, thermisches Schneiden ; Jubiläumstagung 50 Jahre SLV Berlin ; Gemeinschaftstagung 50 Jahre SLV Berlin CY - Berlin, Deutschland DA - 1977-05-11 PY - 1977 SN - 3-87155-344-1 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 45 SP - 166 EP - 174 PB - Deutscher Verl. für Schweißtechnik CY - Düsseldorf AN - OPUS4-8799 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Preß, Henning T1 - Folgerungen für die Praxis aus Messungen der Schadstoffkonzentrationen beim Schweißen mit umhüllten Stabelektroden in engen Räumen T2 - Arbeitsschutz, Qualitätssicherung, thermisches Schneiden ; Jubiläumstagung 50 Jahre SLV Berlin ; Gemeinschaftstagung 50 Jahre SLV Berlin CY - Berlin, Deutschland DA - 1977-05-11 PY - 1977 SN - 3-87155-344-1 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 45 SP - 29 EP - 35 PB - Deutscher Verl. für Schweißtechnik CY - Düsseldorf AN - OPUS4-8803 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Holzlöhner, Ulrich ED - Prange, B. T1 - Dynamic soil-structure interaction T2 - NATO Advanced Study Institute and International Conference on Dynamical Methods in Soil and Rock Mechanics ; DMSR ; International Symposium CY - Karlsruhe, Germany DA - 1977-09-05 PY - 1978 SN - 90-6191-024-2 N1 - Serientitel: Dynamical Methods in soil and rock mechanics / Institute of Soil and Rock Mechanics, University of Karlsruhe – Series title: Dynamical Methods in soil and rock mechanics / Institute of Soil and Rock Mechanics, University of Karlsruhe VL - 1 IS - 1 SP - 103 EP - 126 PB - Balkema CY - Rotterdam AN - OPUS4-8865 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Holzlöhner, Ulrich ED - Gudehus, G. T1 - Residual settlements in sand due to repeated loading T2 - International Conference on Dynamical Methods in Soil and Rock Mechanics CY - Karlsruhe, Germany DA - 1977-09-05 PY - 1978 SN - 90-6191-025-0 SP - 321 EP - 332 PB - Balkema CY - Rotterdam AN - OPUS4-8866 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rücker, Werner ED - Prange, B. T1 - Measurement and evaluation of random vibrations T2 - NATO Advanced Study Institute and International Conference on Dynamical Methods in Soil and Rock Mechanics ; DMSR ; International Symposium CY - Karlsruhe, Germany DA - 1977-09-05 PY - 1978 SN - 90-6191-024-2 N1 - Serientitel: Dynamical Methods in soil and rock mechanics / Institute of Soil and Rock Mechanics, University of Karlsruhe – Series title: Dynamical Methods in soil and rock mechanics / Institute of Soil and Rock Mechanics, University of Karlsruhe VL - 1 IS - 1 SP - 407 EP - 421 PB - Balkema CY - Rotterdam AN - OPUS4-8867 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Gerhard Wilhelm T1 - Produktinnovation - eine Aufgabe allein für den Ingenieur? T2 - 2. VDI-Kongress PRO-IN CY - Düsseldorf, Deutschland DA - 1978-10-05 PY - 1978 SN - 3-18-090319-8 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte VL - 319 IS - 319 SP - 1 EP - 4 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-8807 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brandes, Klaus ED - Brebbia, C. T1 - A boundary integral scheme to solve two-dimensional mixed boundary value problems PY - 1978 SN - 0-7273-1803-9 SP - 271 EP - 281 PB - Pentech Press CY - London AN - OPUS4-8855 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Oelsner, Günter T1 - Das Verhalten anodisierter Aluminiumteile gegenüber Witterungseinflüssen T2 - Fachtagung Aluminium-Oberflächen, Knet- und Gußwerkstoffe, Gestaltungsmöglichkeiten, Prüfmethoden CY - Düsseldorf, Deutschland DA - 1978-03-08 PY - 1978 SN - 3-87017-135-9 SP - 14/1 EP - 14/5 PB - Aluminium-Verl. CY - Düsseldorf AN - OPUS4-8827 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jaeger, Thomas A. ED - Hosemann, G. T1 - Beurteilung technischer Risiken T2 - VDE-Tagung CY - Braunschweig, Deutschland DA - 1978-04-13 PY - 1978 SN - 3-8007-1149-4 SP - 129 EP - 158 PB - VDE-Verl. CY - Berlin AN - OPUS4-8837 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hundt, Jürgen A1 - Kantelberg, Hans T1 - Sorptionsuntersuchungen an Zementstein, Zementmörtel und Beton PY - 1978 SN - 3-433-00817-5 N1 - Serientitel: Deutscher Ausschuß für Stahlbeton – Series title: Deutscher Ausschuß für Stahlbeton IS - 297 SP - 25 EP - 39 PB - Ernst & Sohn CY - Berlin AN - OPUS4-8839 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kirschke, Kurt ED - Bartz, Wilfried J. T1 - Rheologische Grundlagen zum Fließverhalten von Mehrbereichsmotorenölen T2 - Internationales Kolloquium CY - Ostfildern, Deutschland DA - 1977-12-07 PY - 1978 SN - 3-88146-176-0 SP - 3/1 EP - 3/19 CY - Grafenau AN - OPUS4-8935 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hattwig, Martin T1 - Die VDI-Richtlinie 3673 "Druckentlastung von Staubexplosionen" und besondere Probleme bei ihrer praktischen Anwendung T2 - Kolloquium Sichere Handhabung brennbarer Stäube CY - Nürnberg, Deutschland DA - 1977-10-12 PY - 1978 SN - 3-18-090304-X SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 304 SP - 117 EP - 126 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-8893 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Leuschke, Günter A1 - Oßwald, Reiner T1 - Bedeutung und Ermittlung von sicherheitstechnischen Kenngrößen brennbarer Stäube T2 - Kolloquium Sichere Handhabung brennbarer Stäube CY - Nürnberg, Deutschland DA - 1977-10-12 PY - 1978 SN - 3-18-090304-X SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 304 SP - 29 EP - 38 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-8895 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Amberg, Claus A1 - Czaika, Norbert ED - Czaika, Norbert ED - Mayer, N. T1 - Aufschweißbare, metallisch gekapselte Dehnungsmeßstreifen für hohe Temperaturen PY - 1978 SN - 3-433-00818-3 SN - 0366-1296 SP - 21 EP - 27 PB - Druckhaus Langenscheidt CY - Berlin AN - OPUS4-8961 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Amberg, Claus A1 - Czaika, Norbert ED - Czaika, Norbert ED - Mayer, N. T1 - Induktive und Transformator-Wegaufnehmer für hohe Temperaturen PY - 1978 SN - 3-433-00818-3 SN - 0366-1296 SP - 28 EP - 34 PB - Druckhaus Langenscheidt CY - Berlin AN - OPUS4-8962 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Amberg, Claus A1 - Mayer, Norbert ED - Czaika, N. ED - Mayer, N. T1 - Über den Versuchseinsatz verschiedener Meßsysteme für Spannbeton-Reaktordruckbehälter PY - 1978 SN - 3-433-00818-3 SN - 0366-1296 SP - 76 EP - 86 PB - Druckhaus Langenscheidt CY - Berlin AN - OPUS4-8963 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Andreae, Götz ED - Czaika, Norbert ED - Mayer, N. T1 - Aufschweißbare kapazitive Dehnungsaufnehmer für hohe Temperaturen PY - 1978 SN - 3-433-00818-3 SN - 0366-1296 SP - 35 EP - 36 PB - Druckhaus Langenscheidt CY - Berlin AN - OPUS4-8964 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Andreae, Götz ED - Czaika, Norbert ED - Mayer, N. T1 - Über den Kernstrahlungseinfluß auf elektrische Meßwertaufnehmer, insbesondere Dehnungsmeßstreifen PY - 1978 SN - 3-433-00818-3 SN - 0366-1296 SP - 37 EP - 39 PB - Druckhaus Langenscheidt CY - Berlin AN - OPUS4-8965 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Dowson, D. T1 - Friction regimes and film transfer of polymers sliding against various materials T2 - 3rd Leeds-Lyon Symposium on Tribology CY - Leeds, England, UK DA - 1976-09-01 PY - 1978 SN - 0-85298-367-0 SP - 285 EP - 287 PB - Mechanical Engineering Publ. CY - London AN - OPUS4-8919 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sickfeld, Jürgen A1 - Feuerberg, Hubert ED - Bartholomé, E. ED - Ullmann, F. T1 - Lacke: Prüfung, Analyse PY - 1978 SN - 3-527-20015-0 N1 - Serientitel: Ullmanns Encyklopädie der technischen Chemie – Series title: Ullmanns Encyklopädie der technischen Chemie IS - 15 SP - 695 EP - 706 PB - Verl. Chemie CY - Weinheim ET - 4., neubearb. und erw. AN - OPUS4-8877 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Markowski, Winfried A1 - Henker, H. ED - Czaika, N. ED - Mayer, N. T1 - Zur Kraftmessung in den Spannsystemen mittels magnetoelastischer Kraftmeßdosen PY - 1978 SN - 3-433-00818-3 SN - 0366-1296 SP - 75 PB - Druckhaus Langenscheidt CY - Berlin AN - OPUS4-8976 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mayer, Norbert A1 - Amberg, Claus A1 - Specht, Jürgen A1 - Wulkau, W. ED - Czaika, N. ED - Mayer, N. T1 - Aufbau, Eigenschaften und Einsatzmöglichkeiten eines neuen fluidischen Meßsystems PY - 1978 SN - 3-433-00818-3 SN - 0366-1296 SP - 13 EP - 20 PB - Druckhaus Langenscheidt CY - Berlin AN - OPUS4-8977 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mayer, Norbert T1 - Spannkraftmessungen in Erdankern - Berechnungsgrundlagen und Anwendung eines neuen Meßgerätes T2 - 6. Internationale Konferenz Experimentelle Spannungsanalyse CY - München, Deutschland DA - 1978-09-18 PY - 1978 SN - 3-18-090313-9 SN - 0083-5560 VL - 313 SP - 275 EP - 278 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-8978 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wüstenberg, Hermann A1 - Mundry, Eberhard A1 - Kutzner, Jürgen ED - Natesh, R. T1 - Experience with Flaw Size Estimation by Ultrasonic Holography with Numerical Reconstruction T2 - Nondestructive evaluation in the nuclear industryProceedings of an International Conference CY - Salt Lake City, UT, USA DA - 1978-02-13 PY - 1978 SN - 0-87170-029-8 SP - 389 EP - 401 CY - Metals Park, Ohio AN - OPUS4-8999 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Just, Tilman A1 - Kuhlow, Berndt A1 - Matthies, Klaus A1 - Neumann, Eberhard A1 - Römer, Manfred T1 - Über den Stand der Entwicklung einer Ultraschallprüftechnik für austenitische Schweißverbindungen T2 - 3. Internationales Kolloquium Schweißen in der Kerntechnik CY - Hamburg, Deutschland DA - 1978-11-28 PY - 1978 SN - 3-87155-353-0 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 52 SP - 237 EP - 242 PB - Deutscher Verl. für Schweißtechnik CY - Düsseldorf AN - OPUS4-8986 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neumann, Eberhard A1 - Römer, Manfred A1 - Just, Tilman A1 - Matthies, Klaus A1 - Nabel, Eberhard A1 - Mundry, Eberhard ED - Natesh, R. T1 - Development and Improvement of Ultrasonic Testing Techniques for Austenitic Nuclear Components T2 - Nondestructive evaluation in the nuclear industryProceedings of an International Conference CY - Salt Lake City, UT, USA DA - 1978-02-13 PY - 1978 SN - 0-87170-029-8 SP - 84 EP - 105 CY - Metals Park, Ohio AN - OPUS4-8992 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Florian, Wolfgang A1 - Neumann, Volker T1 - Maßnahmen zur Begrenzung des Wasserstoffgehaltes im Schweißgut von Feinkornbaustählen T2 - 3. Internationales Kolloquium Schweißen in der Kerntechnik CY - Hamburg, Deutschland DA - 1978-11-28 PY - 1978 SN - 3-87155-353-0 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 52 SP - 173 EP - 178 PB - Deutscher Verl. für Schweißtechnik CY - Düsseldorf AN - OPUS4-9013 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilken, Klaus T1 - Universelle Heißrißprüfung mit dem modifizierten Varestraint-Transvarestrainttest T2 - 3. Internationales Kolloquium Schweißen in der Kerntechnik CY - Hamburg, Deutschland DA - 1978-11-28 PY - 1978 SN - 3-87155-353-0 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 52 SP - 224 EP - 228 PB - Deutscher Verl. für Schweißtechnik CY - Düsseldorf AN - OPUS4-9037 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Gerhard Wilhelm T1 - Zukunftssicherung im Wandel der Strukturen T2 - Deutscher Ingenieurtag (Plenarversammlung, Übersichtsvorträge, Podiumsdiskussion) CY - Nürnberg, Deutschland DA - 1979-01-01 PY - 1979 SN - 3-18-090342-2 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 342 SP - 3 EP - 4 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-9041 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Aurich, Dietmar A1 - Helms, Rolf T1 - Grundlagen zum Spannungs- und Verformungszustand und zum Werkstoffverhalten bei quasistatischer Beanspruchung T2 - VDI-Tagung Übertragbarkeit von Versuchs- und Prüfergebnissen auf Bauteile CY - Berlin, Deutschland DA - 1979-11-29 PY - 1979 SN - 3-18-090354-6 SN - 0083-5560 VL - 354 SP - 7 EP - 25 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-9044 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neumann, Volker A1 - Schönherr, Wolfgang T1 - Die wasserstoffbeeinflußte Kaltrißneigung zweier höherfester niedriglegierter Baustähle - bewertet im Implantversuch T2 - 3. Internationales Kolloquium Schweißen in der Kerntechnik CY - Hamburg, Deutschland DA - 1978-11-28 PY - 1978 SN - 3-87155-353-0 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 52 SP - 217 EP - 223 PB - Deutscher Verl. für Schweißtechnik CY - Düsseldorf AN - OPUS4-9028 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Preß, Henning A1 - Steigleder, Bodo T1 - Stickoxidbildung bei Autogenverfahren - Maßnahmen zur Vermeidung von Gesundheitsschäden T2 - Große Schweißtechnische Tagung CY - Wiesbaden, Deutschland DA - 1978-10-11 PY - 1978 SN - 3-87155-351-4 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 50 SP - 125 EP - 133 PB - Dt. Verl. f. Schweißtechnik CY - Düsseldorf AN - OPUS4-9030 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schönherr, Wolfgang T1 - Werkstoffliche und konstruktive Maßnahmen zum Vermeiden von Lamellenbrüchen in Schweißkonstruktionen T2 - Große Schweißtechnische Tagung CY - Wiesbaden, Deutschland DA - 1978-10-11 PY - 1978 SN - 3-87155-351-4 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 50 SP - 83 EP - 87 PB - Dt. Verl. f. Schweißtechnik CY - Düsseldorf AN - OPUS4-9032 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schönherr, Wolfgang A1 - Wilken, Klaus T1 - Beurteilung der Aussagefähigkeit von Rißeinleitungs- und Rißauffangkriterien T2 - 3. Internationales Kolloquium Schweißen in der Kerntechnik CY - Hamburg, Deutschland DA - 1978-11-28 PY - 1978 SN - 3-87155-353-0 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 52 SP - 198 EP - 202 PB - Deutscher Verl. für Schweißtechnik CY - Düsseldorf AN - OPUS4-9034 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Hans-Joachim T1 - Elektrodenstandzeitprobleme beim Punktschweißen - Gütesicherung, Wirtschaftlichkeit T2 - 11. Stuttgarter Sondertagung "Widerstandsschweißtechnik - Erkenntnisse für die Praxis, Erfahrungen aus der Praxis" CY - Stuttgart, Deutschland DA - 1978-11-07 PY - 1978 SN - 3-87155-352-2 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 51 SP - 74 EP - 89 PB - Dt. Verl. für Schweißtechnik CY - Düsseldorf AN - OPUS4-9019 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Hans-Joachim A1 - Simon, Götz T1 - Eigenschaften von weichen unlegierten Stählen und ihr Einfluß auf die Eigenschaften von Punkt- und Buckelschweißungen T2 - 11. Stuttgarter Sondertagung "Widerstandsschweißtechnik - Erkenntnisse für die Praxis, Erfahrungen aus der Praxis" CY - Stuttgart, Deutschland DA - 1978-11-07 PY - 1978 SN - 3-87155-352-2 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 51 SP - 45 EP - 54 PB - Dt. Verl. für Schweißtechnik CY - Düsseldorf AN - OPUS4-9021 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Hans-Joachim A1 - Preß, Henning T1 - Hinweise für die Praxis zu den möglichen Schadstoffen beim Widerstandsschweißen T2 - 11. Stuttgarter Sondertagung "Widerstandsschweißtechnik - Erkenntnisse für die Praxis, Erfahrungen aus der Praxis" CY - Stuttgart, Deutschland DA - 1978-11-07 PY - 1978 SN - 3-87155-352-2 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 51 SP - 60 EP - 65 PB - Dt. Verl. für Schweißtechnik CY - Düsseldorf AN - OPUS4-9023 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lützow, Wolfgang ED - Usemann, K. T1 - Warmwasserleitungen: Lebensdauer von Kunststoffrohren T2 - Deutscher Ingenieurtag CY - Nürnberg, Deutschland DA - 1979-05-30 PY - 1979 SN - 3-18-090337-6 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 337 SP - 61 EP - 68 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-9097 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Deppe, Hans-Joachim T1 - Holzschutz und Holzbaustoffe T2 - Kongreß Altbaumodernisierung ; Deutsche Industrieausstellung CY - Berlin, Deutschland DA - 1978-09-18 PY - 1979 SN - 3-7678-0474-3 SP - 549 EP - 560 PB - Colloquium-Verlag CY - Berlin AN - OPUS4-9138 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habig, Karl-Heinz T1 - Thermochemisch gebildete Oberflächenschichten auf Stahl T2 - Tagung "Verschleißschutz durch Oberflächenschichten" CY - Stuttgart, Deutschland DA - 1979-03-22 PY - 1979 SN - 3-18-090336-8 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 333 SP - 43 EP - 51 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-9144 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Dowson, D. T1 - On the Characterization of Failure in Thin Film Lubrication by a "Failure Formula" T2 - 5th Leeds-Lyon Symposium on Tribology CY - Leeds, England, UK DA - 1978-09-19 PY - 1979 SN - 0-85298-429-4 VL - 5 SP - 410 EP - 414 PB - Mechanical Engineering Publ. CY - London AN - OPUS4-9133 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Deppe, Hans-Joachim T1 - Zum Stand der Technik bei der Herstellung von Holzspanplatten T2 - Internationales Spanplatten Symposium CY - Hamburg, Deutschland DA - 1978-09-18 PY - 1979 SN - 3-87181-224-2 SP - 18 EP - 35 PB - DRW-Verl. CY - Stuttgart AN - OPUS4-9135 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Andreae, Götz ED - Czaika, Norbert ED - Mayer, N. T1 - Zur Feuchtemessung in Beton PY - 1978 SN - 3-433-00818-3 SN - 0366-1296 SP - 64 EP - 67 PB - Druckhaus Langenscheidt CY - Berlin AN - OPUS4-8966 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czaika, Norbert ED - Czaika, Norbert ED - Mayer, N. T1 - Über die Anforderungen an die Meßtechnik für Spannbeton-Reaktordruckbehälter und ihre Realisierungsmöglichkeiten KW - Reaktordruckbehälter KW - Spannbeton KW - Prüftechnik KW - Technische Sicherheit PY - 1978 SN - 3-433-00818-3 SN - 0366-1296 SP - 5 EP - 12 PB - Druckhaus Langenscheidt CY - Berlin AN - OPUS4-8968 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czaika, Norbert A1 - Magiera, Götz A1 - Timme, W. ED - Czaika, Norbert ED - Mayer, N. T1 - Zur Verformungsmessung an Würfelproben aus Beton PY - 1978 SN - 3-433-00818-3 SN - 0366-1296 SP - 40 EP - 46 PB - Druckhaus Langenscheidt CY - Berlin AN - OPUS4-8969 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czaika, Norbert A1 - Timme, W. ED - Czaika, Norbert ED - Mayer, N. T1 - Zur Dehnungsintegration und Meßwegübertragung mittels eines universell einsetzbaren Bowdenzugsystems PY - 1978 SN - 3-433-00818-3 SN - 0366-1296 SP - 68 EP - 74 PB - Druckhaus Langenscheidt CY - Berlin AN - OPUS4-8970 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hosp, Erich A1 - Knapp, Jürgen T1 - Anwendung der holographischen shearing-Interferometrie zur vollständigen Bestimmung ebener Spannungszustände in Modellen T2 - 6. Internationale Konferenz Experimentelle Spannungsanalyse CY - München, Deutschland DA - 1978-09-18 PY - 1978 SN - 3-18-090313-9 SN - 0083-5560 VL - 313 SP - 187 EP - 193 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-8972 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Magiera, Götz A1 - Czaika, Norbert ED - Czaika, Norbert ED - Mayer, N. T1 - Über die Voraussetzungen für betonseitige Messungen an der Dichthaut PY - 1978 SN - 3-433-00818-3 SN - 0366-1296 SP - 47 EP - 50 PB - Druckhaus Langenscheidt CY - Berlin AN - OPUS4-8974 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Magiera, Götz A1 - Czaika, Norbert ED - Czaika, Norbert ED - Mayer, N. T1 - Zur Spannungsermittlung in Beton PY - 1978 SN - 3-433-00818-3 SN - 0366-1296 SP - 51 EP - 63 PB - Druckhaus Langenscheidt CY - Berlin AN - OPUS4-8975 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stockhausen, K. A1 - Bögl, W. A1 - Weise, Hans-Peter ED - Reich, H. T1 - Die strahleninduzierte Chemilumineszenz von festen Polyalkoholen als gewebeäquivalentes Dosimetersystem für energiereiche Strahlung T2 - 10. Wissenschaftliche Tagung der Deutschen Gesellschaft für Medizinische Physik CY - Braunschweig, Deutschland DA - 1979-05-16 PY - 1979 SN - 3-7785-0612-9 SP - 199 EP - 204 PB - Hüthig CY - Heidelberg AN - OPUS4-9202 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bathke, Werner A1 - Philippovich, N. A1 - Stickler, R. A1 - Frieler, K. T1 - Brazing under microgravity - TEXUS II experiment T2 - 3rd European Symposium on Material Science in Space ; 3éme Symposium Européen de Science des Matériaux dans l'Espace CY - Grenoble, France DA - 1979-04-24 PY - 1979 SN - 0379-6566 N1 - Serientitel: ESA SP – Series title: ESA SP IS - 142 SP - 95 EP - 100 PB - European Space Agency CY - Neuilly AN - OPUS4-9207 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bathke, Werner A1 - Philippovich, N. A1 - Stickler, R. A1 - Frieler, K. ED - Faust, D. T1 - Brazing of capillary gaps under microgravity - sounding rocket project TEXUS II PY - 1979 SP - 1 EP - 38 PB - Deutsche Forschungs- u. Versuchsanstalt für Luft- und Raumfahrt e.V. CY - Köln AN - OPUS4-9208 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czepluch, Wolf T1 - Einige optische Methoden zur Charakterisierung und Prüfung metallischer Oberflächen PY - 1979 SN - 3-88355-021-3 SP - 75 EP - 83 PB - DGM CY - Oberursel AN - OPUS4-9161 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ruske, Walter ED - Rürup, R. T1 - Außeruniversitäre technisch-naturwissenschaftliche Forschungsanstalten in Berlin bis 1945 PY - 1979 SN - 3-540-09672-8 VL - 1 SP - 231 EP - 263 PB - Springer CY - Berlin AN - OPUS4-9230 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ruske, Walter ED - Rürup, R. T1 - Zur Geschichte der technischen Chemie in Berlin PY - 1979 SN - 3-540-09672-8 SP - 153 EP - 176 PB - Springer CY - Berlin AN - OPUS4-9231 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schroeder, H.-J. A1 - Hillmann, W. A1 - Hosseini, M. A1 - Kallmann, A. ED - Schroeder, H. T1 - The Establishment of a Reference Card for Standard ISO 3554 - Investigation of mechanical, surface and electromagnetic properties of identification card samples PY - 1979 SN - 0340-8639 N1 - Serientitel: PTB-Bericht : Ak – Series title: PTB-Bericht : Ak IS - 20 SP - 1 EP - 40 PB - PTB CY - Braunschweig AN - OPUS4-9316 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Groß, Dieter T1 - Analyse von Lacken und Beschichtungen PY - 1980 SN - 3-87903-054-5 VL - 8 SP - 222 PB - Colomb CY - Stuttgart AN - OPUS4-9318 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Zehr, Joachim ED - Behrens, D. T1 - Physikalisch-chemische Sicherheitskriterien der Stoffe und Stoffsysteme T2 - 17. Tutzing-Symposion der DECHEMA CY - Tutzing, Deutschland DA - 1980-01-01 PY - 1980 SN - 3-527-10771-1 SN - 0070-315x IS - 88 SP - 9 EP - 20 PB - Verl. Chemie CY - Weinheim AN - OPUS4-9325 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Panik, F. A1 - Drosdol, J. A1 - Auersch, Lutz T1 - Anwendungsorientierte Untersuchungsmethoden des Lenkverhaltens von Kraftfahrzeugen T2 - VDI-Schwingungstagung CY - Düsseldorf, Deutschland DA - 1980-10-02 PY - 1980 SN - 3-18-090381-3 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 381 SP - 89 EP - 98 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-9293 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schuler, Werner A1 - Walter, Helmut T1 - Eigenspannungsverteilungen in Tellerfedern aus Stahl T2 - Symposium der Deutschen Gesellschaft für Metallkunde CY - Bad Nauheim, Deutschland DA - 1980-01-01 PY - 1981 SN - 3-88355-056-6 SP - 131 EP - 137 PB - Dt. Ges. für Metallkunde CY - Oberursel AN - OPUS4-9249 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Gerhard Wilhelm T1 - Begrüßung zur Tagung 60 Jahre ADB T2 - Tagung "60 Jahre ADB" 1920-1980 CY - Düsseldorf, Deutschland DA - 1980-10-15 PY - 1980 SN - 3-18-090390-2 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte VL - 390 IS - 390 SP - 2 EP - 3 CY - Düsseldorf AN - OPUS4-9238 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sickfeld, Jürgen T1 - Thermoanalyse PY - 1980 SN - 3-87903-054-5 VL - 8 SP - 767 EP - 778 PB - Colomb CY - Stuttgart AN - OPUS4-9306 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kerner-Gang, Waltraut ED - Oxley, T. T1 - Maßnahmen zur Bekämpfung von Mikroorganismen an Archivalien T2 - 4th International Biodeterioration Symposium CY - Berlin, Deutschland DA - 1978-08-01 PY - 1980 SN - 0-273-08459-3 SP - 9 EP - 14 PB - Pitman CY - London AN - OPUS4-9374 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Suh, N. T1 - Fundamentals of the systems approach to tribology and tribotesting T2 - International Conference on the Fundamentals of Tribology CY - Cambridge, MA, USA DA - 1978-06-01 PY - 1980 SN - 0-262-19183-0 SP - 1171 EP - 1182 PB - Mit Pr. CY - Cambridge, Mass. AN - OPUS4-9352 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst T1 - Systems approach to the analysis of wear problems T2 - National Conference on Lubrication, Friction and Wear in Engineering CY - Melbourne, Australia DA - 1980-12-01 PY - 1980 SN - 0-85825-148-5 SP - 247 EP - 252 CY - Barton AN - OPUS4-9354 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühne, Helmut ED - Oxley, T. T1 - Entwicklung einiger Lyctidae- und Bostrychidae-Arten in Abhängigkeit von Nahrung, Temperatur und Luftfeuchte T2 - 4th International Biodeterioration Symposium CY - Berlin, Deutschland DA - 1978-08-01 PY - 1980 SN - 0-273-08459-3 SP - 71 EP - 78 PB - Pitman CY - London AN - OPUS4-9377 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Heinrich, Hans-Jürgen A1 - Conrad, Dietrich A1 - Wegener, Wolfgang A1 - Leuschke, Günter A1 - Wandrey, Peter-Andreas ED - Kelker, H. ED - Bartholomé, E. ED - Ullmann, F. T1 - Sicherheitstechnische Kennwerte brennbarer Gase, Dämpfe und Stäube PY - 1980 SN - 3-527-20005-3 N1 - Serientitel: Ullmanns Encyklopädie der technischen Chemie – Series title: Ullmanns Encyklopädie der technischen Chemie IS - 5 SP - 971 EP - 982 PB - Verl. Chemie CY - Weinheim AN - OPUS4-9328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kirschke, Kurt ED - Suh, N. T1 - Scope and Subdivision of the Field of Tribology with Regard to Documentation and Information T2 - International Conference on the Fundamentals of Tribology CY - Cambridge, MA, USA DA - 1978-06-01 PY - 1980 SN - 0-262-19183-0 SP - 1199 EP - 1206 PB - Mit Pr. CY - Cambridge, Mass. AN - OPUS4-9386 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Deppe, Hans-Joachim T1 - The European Wood-Based Panel Industry Between Structural Changes and Diversification T2 - Symposium on wood-based panels in the 1980s CY - Helsinki, Finland DA - 1980-05-12 PY - 1980 SN - 951-99-272-8-X SP - 27 EP - 35 CY - Helsinki AN - OPUS4-9359 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, E. A1 - Gundlach, Dieter T1 - Diskrepanzen bei der Farbmessung an Würzen und Bieren nach der EBC-Farbskala und Vorschläge zu deren Behebung T2 - 17th European Brewery Convention CY - Berlin, Deutschland DA - 1979-01-01 PY - 1980 SN - 90-70143-09-7 SP - 145 EP - 159 PB - European Brewery Convention CY - Rotterdam AN - OPUS4-9398 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Terstiege, Heinz T1 - Specification of luminescent colours for visual signalling T2 - 19th Session // Commission Internationale de l'Eclairage CY - Kyoto, Japan DA - 1979-01-01 PY - 1980 SN - 92-9034-050-9 SN - 1011-6567 N1 - Serientitel: Publication / Internationale Beleuchtungskommission – Series title: Publication / Internationale Beleuchtungskommission VL - 50 IS - 50 SP - 164 EP - 167 PB - Commission Internationale de l'Eclairage, Bureau Central CY - Paris AN - OPUS4-9403 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst T1 - Funktionale Aufgaben technischer Oberflächen T2 - Tagung Oberflächenschutz beginnt beim Konstruieren CY - Stuttgart, Deutschland DA - 1982-10-12 PY - 1982 SN - 3-18-090449-6 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 449 SP - 13 EP - 21 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-9496 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst T1 - Systematische Analyse und Bearbeitung von Reibungs- und Verschleißproblemen PY - 1982 SN - 3-88508-752-9 SP - 15 EP - 35 PB - Expert-Verl. CY - Grafenau AN - OPUS4-9498 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wüstenberg, Hermann A1 - Erhard, Anton ED - Nichols, R. W. T1 - Development of Ultrasonic Techniques for Sizing Defects T2 - 1st International Seminar on Non-Destructive Examination in Relation to Structural Integrity ; 5th International Conference on Structural Mechanics in Reactor Technology CY - Berlin, Germany DA - 1979-08-22 PY - 1980 SN - 0-85334-908-8 SP - 59 EP - 83 PB - Applied Science Publ. CY - London AN - OPUS4-9426 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kowalewsky, Helmut ED - Bühler, H.-E. T1 - Dichtheitsprüfungen an Behältern für radioaktive Stoffe T2 - Gemeinsames Prüfsymposion der DECHEMA mit der DGZfP CY - Frankfurt am Main, Deutschland DA - 1980-03-20 PY - 1980 SN - 3-527-10772-X SN - 0070-315X N1 - Serientitel: DECHEMA-Monographien – Series title: DECHEMA-Monographien IS - 89 SP - 169 EP - 181 PB - Verl. Chemie CY - Weinheim AN - OPUS4-9431 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmitt, B. F. A1 - Fusban, H.-U. T1 - Analyse von Kohlenstoff, Stickstoff und Sauerstoff in Refraktärmetallen mit Hilfe der Photonenaktivierung T2 - Tagung Gase in Metallen 1979 CY - Darmstadt, Deutschland DA - 1979-01-01 PY - 1980 SN - 3-88355-028-0 SP - 233 EP - 248 PB - Dt. Gesellschaft f. Metallkunde CY - Oberursel AN - OPUS4-9434 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neumann, Eberhard A1 - Wüstenberg, Hermann T1 - Moderne Ultraschallprüfmethoden in der Kernkraftwerkstechnik T2 - VDE-Kongreß '80 CY - Berlin, Deutschland DA - 1980-10-06 PY - 1980 SN - 3-8007-1189-3 SN - 0340-4161 N1 - Serientitel: VDE-Fachberichte – Series title: VDE-Fachberichte IS - 31 SP - 261 EP - 272 PB - VDE-Verl. CY - Berlin AN - OPUS4-9417 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kleistner, Horst A1 - Omar, Mohamed A1 - Reuter, N. A1 - Schmalenberg, Wolfgang A1 - Wilken, Klaus T1 - Messungen von Schweißeigenspannungen an unterpulvergeschweißten Viellagenschweißnähten des Stahls St E 460 T2 - Symposium Prüfverfahren zur Beurteilung der Kaltrißanfälligkeit von Stählen CY - Düsseldorf, Deutschland DA - 1980-03-20 PY - 1980 SN - 3-87155-365-4 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte VL - 64 IS - 64 SP - 28 EP - 34 CY - Düsseldorf AN - OPUS4-9441 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neumann, Volker A1 - Florian, Wolfgang A1 - Schönherr, Wolfgang T1 - Die Bewertung der wasserstoffbeeinflußten Kaltrißneigung mit der Implant-, TRC- und Lehigh-Probe T2 - Symposium Prüfverfahren zur Beurteilung der Kaltrißanfälligkeit von Stählen CY - Düsseldorf, Deutschland DA - 1980-03-20 PY - 1980 SN - 3-87155-365-4 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte VL - 64 IS - 64 SP - 56 EP - 62 CY - Düsseldorf AN - OPUS4-9448 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst A1 - Habig, Karl-Heinz T1 - Grundvorgänge des Verschleißes metallischer Werkstoffe - Neuere Ergebnisse der Forschung T2 - VDI-Tagung Verschleißfeste Werkstoffe CY - Stuttgart, Deutschland DA - 1973-04-12 PY - 1973 SN - 3-18-090194-2 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 194 SP - 23 EP - 31 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-9476 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Bunk, W. ED - Hansen, J. ED - Haag, H. T1 - Entwicklung eines Tribologie-Thesaurus und Auswertung des Tribologie-Förderprogramms mittels Deskriptoren PY - 1981 SN - 3-540-10800-9 VL - 1 SP - 39 EP - 62 PB - Springer CY - Berlin AN - OPUS4-9487 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Hornbogen, E. T1 - Systems Analysis and Description of Wear Processes PY - 1981 SN - 3-88355-046-9 SP - 9 EP - 22 PB - DGM CY - Oberursel AN - OPUS4-9488 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst T1 - Scope of Tribology PY - 1982 SN - 90-247-2746-4 VL - 1 SP - 7 EP - 36 PB - Nijhoff CY - Den Haag AN - OPUS4-9495 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Attia, M. T1 - Wear Mechanism in Tribological Systems - Overview and Classification T2 - ASME Winter Annual Meeting CY - New Orleans, LA, USA DA - 1993-11-28 PY - 1993 SN - 0-7918-1263-4 VL - 67 SP - 239 EP - 241 PB - ASME CY - New York, NY AN - OPUS4-9556 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfender, Max ED - Becker, Gerhard Wilhelm T1 - Die Mitarbeit an technischen Normen als Aufgabe der Wirtschaftsförderung PY - 1973 SP - 1 EP - 4 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9563 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Elze, Johannes ED - Becker, Gerhard Wilhelm T1 - Geometrie der Mikrostreuung und Einebnung bei der elektrolytischen Metallabscheidung PY - 1973 SP - 5 EP - 8 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9564 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Veith, Helmut ED - Becker, Gerhard Wilhelm T1 - Einfluß plastischer Mikroverformungen auf das Spannungs-Dehnungs-Verhalten wechselbeanspruchter Baustähle PY - 1973 SP - 9 EP - 12 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9565 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Czichos, Horst T1 - Werkstoffe PY - 2000 SN - 3-540-66882-9 SP - D1 EP - D90 PB - Springer CY - Berlin ET - 31., neubearb. und erw. AN - OPUS4-9546 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Kürsten, M. T1 - New Materials: Research Trends and Technological Impact T2 - 5. International Raw Materials Symposium CY - Hannover, Germany DA - 1988-10-19 PY - 1990 SN - 3-510-65143-X SP - 15 EP - 38 PB - Schweizerbart CY - Stuttgart AN - OPUS4-9550 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Schuster, H. T1 - Wissenschafts- und Technologietransfer durch die Bundesanstalt für Materialforschung und -prüfung (BAM) PY - 1990 SN - 3-540-51623-9 SP - 389 EP - 406 PB - Springer CY - Berlin AN - OPUS4-9551 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Vierkorn-Rudolph, B. T1 - Meß-, Prüf- und Analysentechnik für neue Werkstoffe T2 - 2. Symposium Materialforschung CY - Dresden, Deutschland DA - 1991-08-26 PY - 1991 SN - 3-8249-0020-3 VL - 2 SP - 1727 EP - 1751 PB - Verl. TÜV Rheinland CY - Köln AN - OPUS4-9552 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Blau, P. T1 - Systematic Diagnosis of Friction and Wear Test Data PY - 1992 SN - 0-87170-380-7 VL - 18 SP - 473 EP - 495 PB - ASM International CY - Materials Park, Ohio ET - 10. AN - OPUS4-9555 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst T1 - Meß-, Prüf- und Untersuchungstechnik für neue Werkstoffe - Erfordernisse und Entwicklungstendenzen T2 - VDI-Werkstofftag CY - München, Deutschland DA - 1988-03-15 PY - 1988 SN - 3-18-090670-7 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 670 SP - 129 EP - 146 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-9529 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Hornbogen, E. ED - Jost, N. T1 - Adolf Martens and the research on martensite T2 - 1st European Conference on Martensitic Transformation in Science and Technology CY - Bochum, Germany DA - 1989-01-01 PY - 1989 SN - 3-88355-153-8 SP - 3 EP - 14 PB - DGM Informationsges. CY - Oberursel AN - OPUS4-9533 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst T1 - Vision for testing and analysis from a technology point of view T2 - 3rd EUROLAB Symposium CY - Berlin, Germany DA - 1996-06-05 PY - 1996 SN - 3-89429-715-8 N1 - Serientitel: EUROLAB Symposium – Series title: EUROLAB Symposium IS - 3 SP - 89 EP - 104 PB - Wirtschaftsverl. NW CY - Bremerhaven AN - OPUS4-9538 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst T1 - Die Bundesanstalt in den Jahren 1992 bis 1996 PY - 1996 SP - 549 EP - 615 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-9539 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Bassani, R. T1 - Tribology and its many facets - from macroscopic to microscopic and nano-scale phenomena T2 - 1st AIMETA International Tribology Conference ; 1st AITC ; AIM workshop CY - L'Aquila, Italy DA - 2000-09-20 PY - 2000 SN - 88-900506-0-8 SP - 15 EP - 26 CY - L'Aquila AN - OPUS4-9544 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Czichos, Horst T1 - Die Ingenieurwissenschaften - ihr Profil in Technik und Gesellschaft, Studium und Beruf PY - 2000 SN - 3-540-66882-9 SP - 1 EP - 14 PB - Springer CY - Berlin ET - 31., neubearb. und erw. AN - OPUS4-9545 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Lee, L.-H. T1 - Contact deformation and static friction of polymers - influences of viscoelasticity and adhesion T2 - 187th Meeting of the American Chemical Society CY - St. Louis, MO, USA DA - 1984-04-08 PY - 1985 SN - 0-8412-0932-4 SP - 3 EP - 26 PB - American Chemical Society CY - Washington, DC AN - OPUS4-9515 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst A1 - Habig, Karl-Heinz ED - Tamai, Y. ED - Aoki, H. T1 - Wear of Medium Carbon Steel - A Systematic Study on Influences of Materials and Operating Parameters T2 - JSLE International Tribology Conference CY - Tokyo, Japan DA - 1985-07-08 PY - 1985 SN - 0-444-99538-2 VL - 3 SP - 879 EP - 884 PB - Elsevier CY - Amsterdam AN - OPUS4-9516 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Friedrich, K. T1 - Introduction to friction and wear PY - 1986 SN - 0-444-42524-1 SN - 0927-0108 N1 - Serientitel: Composite materials series – Series title: Composite materials series IS - 1 SP - 1 EP - 23 PB - Elsevier CY - Amsterdam AN - OPUS4-9518 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst ED - Grantze, E. T1 - Materialforschung und Materialprüfung - Bedeutung, Tendenzen, Aufgaben T2 - Materialforschung und Materialprüfung - Bedeutung, Tendenzen, Aufgaben CY - Berlin DA - 1987-08-13 PY - 1987 SP - 3 EP - 24 PB - BAM CY - Berlin AN - OPUS4-9525 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Caemmerer, Winfrid ED - Becker, Gerhard Wilhelm T1 - Normung und Forschung im Bereich des Bauwesens PY - 1973 SP - 93 EP - 96 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9586 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jung, Erich A1 - Fuhrmann, Günter ED - Becker, Gerhard Wilhelm T1 - Die Beseitigung technischer Handelshemmnisse im europäischen Warenverkehr auf dem Gebiet des Bauwesens - Aus der Arbeit des Sekretariats für UEAtc-Fragen PY - 1973 SP - 97 EP - 100 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9587 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schimmelwitz, Peter ED - Becker, Gerhard Wilhelm T1 - Fragen der Probenahme in der Baustoffprüfung PY - 1973 SP - 101 EP - 104 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9588 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Noll, St. A1 - Rooß, Helmut ED - Becker, Gerhard Wilhelm T1 - Zur Anwendung der Atom-Absorptions-Spektrophotometrie für die Bestimmung von Calcium und Magnesium in mineralischen Bindemitteln und Mörteln PY - 1973 SP - 105 EP - 108 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9589 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schickert, Gerald A1 - Weber, Dietrich ED - Becker, Gerhard Wilhelm T1 - Ermittlung der Druckfestigkeit dünner Betonproben PY - 1973 SP - 109 EP - 112 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9590 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Winkler, Helmut ED - Becker, Gerhard Wilhelm T1 - Zur Haftzugfestigkeit von Klebstoffen für die Verbindung von Zementmörtel mit Stahl bei Raumtemperatur und bei Temperaturen bis 150°C PY - 1973 SP - 113 EP - 116 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9591 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niesel, Konrad ED - Becker, Gerhard Wilhelm T1 - Der Einfluß des Alpha'L und Alpha'H-Übergangs auf die polymorphen Phasenfolgen und die Stabilisierung des Dicalciumsilikats PY - 1973 SP - 117 EP - 120 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9592 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jaeger, Thomas A. ED - Becker, Gerhard Wilhelm T1 - Die Aufgaben des Bauingenieurs in der Kerntechnik PY - 1973 SP - 121 EP - 124 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9593 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Eifler, Heinz A1 - Plauk, Günther ED - Becker, Gerhard Wilhelm T1 - Theoretische und experimentelle Ermittlung der Drehfähigkeit plastischer Gelenke in Stahlbetonkonstruktionen unter besonderer Berücksichtigung des Verbundverhaltens PY - 1973 SP - 125 EP - 128 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9594 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wegener, Peter A1 - Matthees, Wolfgang ED - Becker, Gerhard Wilhelm T1 - Experimentelle und theoretische Untersuchung des Tragverhaltens einer Netzkuppel PY - 1973 SP - 129 EP - 132 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9595 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Haedecke, Kurt ED - Becker, Gerhard Wilhelm T1 - Thermodynamische Betrachtungen zur Herstellung von Messing im Altertum und Mittelalter PY - 1973 SP - 13 EP - 16 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9566 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hunger, Johanna ED - Becker, Gerhard Wilhelm T1 - Die Metallographie im Dienste der Werkstoffprüfung - Aufklärung und Verhütung von Schwierigkeiten bei der spanlosen Kaltformgebung PY - 1973 SP - 17 EP - 20 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9567 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wobst, Klaus A1 - Hardtke, Klaus-Dieter ED - Becker, Gerhard Wilhelm T1 - Ein Dämpfungsmeßverfahren zur gleichzeitigen Bestimmung der im Alpha-Eisen gelösten Stickstoff- und Kohlenstoffgehalte PY - 1973 SP - 21 EP - 24 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9568 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meyer, Dieter A1 - Aurich, Dietmar A1 - Zaminer, Christian ED - Becker, Gerhard Wilhelm T1 - Quantitative Bildanalyse PY - 1973 SP - 25 EP - 28 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9569 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schuler, Werner A1 - Walter, Helmut ED - Becker, Gerhard Wilhelm T1 - Untersuchungen zur Genauigkeit der röntgenographischen Austenitbestimmung PY - 1973 SP - 29 EP - 32 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9570 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Amedick, Egon ED - Becker, Gerhard Wilhelm T1 - Zur Anwendung schwingfähiger Systeme in der Materialprüfung PY - 1973 SP - 33 EP - 36 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9571 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helms, Rolf A1 - Ziebs, Josef ED - Becker, Gerhard Wilhelm T1 - Werkstoffmechanik und Verbundkonstruktionen PY - 1973 SP - 37 EP - 40 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9572 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bargel, H.-J. ED - Becker, Gerhard Wilhelm T1 - Zur Frage der Übertragbarkeit der Ergebnisse von Dauerschwingversuchen von kleinen Proben auf große Bauteile PY - 1973 SP - 41 EP - 44 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9573 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schrimmer, Peter A1 - Lösche, Hans A1 - Gogolin, Bernd ED - Becker, Gerhard Wilhelm T1 - Untersuchungen an Hüllgetrieben PY - 1973 SP - 45 EP - 48 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9574 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schulz-Forberg, Bernd ED - Becker, Gerhard Wilhelm T1 - Berechnung instationärer Wärmeströmungen bei Feuereinwirkung auf Verpackungen PY - 1973 SP - 49 EP - 52 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9575 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Groß, Dieter A1 - Metasch, Wilfried ED - Becker, Gerhard Wilhelm T1 - Analyse von vernetzten Polymeren in Vulkanisaten PY - 1973 SP - 253 EP - 256 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9626 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ecke, Peter A1 - Kelm, Jürgen A1 - Tengicki, Hanns A1 - Vogel, Lydia ED - Becker, Gerhard Wilhelm T1 - Konzept eines Geräts zur digitalen Bilderfassung PY - 1973 SP - 257 EP - 260 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9627 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hampe, Andreas A1 - Mielke, Werner ED - Becker, Gerhard Wilhelm T1 - Relaxationsspektrometrie an Polymeren PY - 1973 SP - 261 EP - 264 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9628 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fuhrmann, Gerhard A1 - Trubiroha, Peter ED - Becker, Gerhard Wilhelm T1 - Schädigung thermoplastischer Kunststoffe durch wechselnde Dehnungsbeanspruchung und Lichteinwirkung PY - 1973 SP - 265 EP - 268 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9629 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Zehr, Joachim ED - Becker, Gerhard Wilhelm T1 - Erste Maßnahmen nach Unfällen beim Transport gefährlicher Güter PY - 1973 SP - 269 EP - 272 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9630 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meier, Klaus A1 - Spengler, H. ED - Becker, Gerhard Wilhelm T1 - Gefährliche Güter und Kunststoffwandungen PY - 1973 SP - 273 EP - 276 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9631 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Heinrich, Hans-Jürgen ED - Becker, Gerhard Wilhelm T1 - Zur Bemessung von Druckentlastungsöffnungen bei Gas- und Staubexplosionen PY - 1973 SP - 277 EP - 280 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9632 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wegener, Wolfgang A1 - Schlieper, Horst ED - Becker, Gerhard Wilhelm T1 - Brandgefahren in Anlagen für verdichteten oder flüssigen Sauerstoff PY - 1973 SP - 281 EP - 284 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9633 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Leuschke, Günter ED - Becker, Gerhard Wilhelm T1 - Staubzündungen durch intensive Licht- und Wärmestrahlung PY - 1973 SP - 285 EP - 288 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9634 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schönewald, I. ED - Becker, Gerhard Wilhelm T1 - Thermische Zersetzung und Entzündung von Polyvinylalkohol PY - 1973 SP - 289 EP - 292 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9635 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Treumann, Hartwig A1 - Schmidt, Jürgen A1 - Zahn, Edward von ED - Becker, Gerhard Wilhelm T1 - Die sicherheitstechnische Bedeutung der sprengstoffrechtlichen Vorschriften über die Prüfungen pyrotechnischer Sätze und Gegenstände PY - 1973 SP - 333 EP - 336 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9646 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Möller, Karl-Heinz ED - Becker, Gerhard Wilhelm T1 - Sicherheitstechnik bei Gasgeräten und Acetylenanlagen am Beispiel der Entwicklung eines Verfahrens zur Ermittlung der zulässigen Aceton- und Acetylenfüllungen in ortsbeweglichen Druckgasbehältern für Acetylen PY - 1973 SP - 337 EP - 340 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9647 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Trapper, Joachim A1 - Lietze, Dieter ED - Becker, Gerhard Wilhelm T1 - Sichere Handhabung gasförmigen Acetylens PY - 1973 SP - 341 EP - 344 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9648 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marcks, Gerrit A1 - Enseleit, W. ED - Becker, Gerhard Wilhelm T1 - Sicherheitstechnische Untersuchungen an Acetylenflaschen PY - 1973 SP - 345 EP - 348 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9649 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Roch, Karl-Heinz ED - Becker, Gerhard Wilhelm T1 - Über die Entwicklung und Prüfung trockener Sicherheitsvorlagen für Acetylen-Verteilungsleitungen PY - 1973 SP - 349 EP - 352 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9650 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Behrend, Eberhard ED - Becker, Gerhard Wilhelm T1 - Mechanisch erzeugte Funken PY - 1973 SP - 353 EP - 356 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9651 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Günther ED - Becker, Gerhard Wilhelm T1 - 33 Jahre Termiten-Forschung und -Prüfung in Berlin-Dahlem PY - 1973 SP - 357 EP - 360 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9652 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Günther ED - Becker, Gerhard Wilhelm T1 - Mitwirkung der Bundesanstalt für Materialprüfung bei internationalen Aufgaben PY - 1973 SP - 361 EP - 364 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9653 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gersonde, Martin ED - Becker, Gerhard Wilhelm T1 - Untersuchungen über das Tränken von Bauholz durch Kurztauchen, Tauchen und Trogtränken PY - 1973 SP - 365 EP - 368 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9654 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühne, Helmut A1 - Ehlert, I. A1 - Pantke, Michael ED - Becker, Gerhard Wilhelm T1 - Forschungsarbeiten aus dem Laboratorium "Mikrobiologie und Zoologie" PY - 1973 SP - 369 EP - 372 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9655 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böhmert, Werner A1 - Brünner, Wolfgang ED - Becker, Gerhard Wilhelm T1 - Masse-Querstoß auf elastische Balken und Rechteckplatten PY - 1973 SP - 133 EP - 136 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9596 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Struck, Werner A1 - Limberger, Ernst A1 - Brandes, Klaus ED - Becker, Gerhard Wilhelm T1 - Zur Abschätzung der Beanspruchung in Flächentragwerken bei örtlicher Stoßbelastung mit Parameterstudie am Beispiel einer Stahlbeton-Kugelschale PY - 1973 SP - 137 EP - 140 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9597 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dolling, Hans-Joachim A1 - Dietrich, T. ED - Becker, Gerhard Wilhelm T1 - Die Möglichkeiten experimenteller Untersuchungen im Grundbau bei besonderer Berücksichtigung der Modelltechnik PY - 1973 SP - 141 EP - 144 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9598 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dietrich, T. ED - Becker, Gerhard Wilhelm T1 - Konstistutive Gleichungen des starrkörnigen Stoffes - Anwendung auf einige bekannte Versuchsergebnisse PY - 1973 SP - 145 EP - 148 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9599 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dolling, Hans-Joachim ED - Becker, Gerhard Wilhelm T1 - Untersuchungsbeispiele aus der Baugrunddynamik PY - 1973 SP - 149 EP - 152 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9600 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gollmer, W. A1 - Lindner, Janina ED - Becker, Gerhard Wilhelm T1 - Der bituminöse Straßenbau in Vergangenheit und Gegenwart PY - 1973 SP - 153 EP - 156 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9601 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Holzlöhner, Ulrich ED - Becker, Gerhard Wilhelm T1 - Die Methode der finiten Elemente in der Bodendynamik PY - 1973 SP - 157 EP - 160 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9602 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schneider, Patrick ED - Becker, Gerhard Wilhelm T1 - Der Einfluß der Nebenwegübertragung auf die Luftschalldämmung von Bauteilen PY - 1973 SP - 161 EP - 164 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9603 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rudolphi, Reinald A1 - Stanke, J. ED - Becker, Gerhard Wilhelm T1 - Theoretische Ermittlung der Feuerwiderstandsdauer von einteiligen, brettschichtverleimten Stützen unter Druckbeanspruchung PY - 1973 SP - 165 EP - 168 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9604 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wagner, Armin A1 - Kieper, Gerhard ED - Becker, Gerhard Wilhelm T1 - Ein Beitrag zur Messung der Temperaturleitfähigkeit von Baustoffen PY - 1973 SP - 169 EP - 172 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9605 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czaika, Norbert ED - Becker, Gerhard Wilhelm T1 - Über die Entwicklung der wichtigsten Verfahren der experimentellen Spannungsanalyse in den letzten 25 Jahren PY - 1973 SP - 453 EP - 456 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9676 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mayer, Norbert A1 - Flesch, U. ED - Becker, Gerhard Wilhelm T1 - Fluidische Meßanordnung zur Dehnungsmessung in Spannbeton-Reaktordruckbehältern PY - 1973 SP - 457 EP - 460 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9677 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Andreae, Götz A1 - Knapp, Jürgen ED - Becker, Gerhard Wilhelm T1 - Neue Entwicklungen und Erkenntnisse im Bereich der Dehnungsmeßstreifentechnik PY - 1973 SP - 461 EP - 464 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9678 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hosp, Erich A1 - Wutzke, Günter ED - Becker, Gerhard Wilhelm T1 - Anwendung der holographischen Interferometrie zur Untersuchung des Spannungszustandes in ebenen Modellen PY - 1973 SP - 465 EP - 468 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9679 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Markowski, Winfried A1 - Oppermann, Klaus A1 - Schneider, Harald ED - Becker, Gerhard Wilhelm T1 - Systematische Betrachtung und Ordnung auf den Gebieten Materialprüfmaschinen, Kraftmeßeinrichtungen und elektrische Meßgeräte PY - 1973 SP - 469 EP - 472 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9680 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mundry, Eberhard A1 - Völkel, Uta A1 - Wüstenberg, Hermann ED - Becker, Gerhard Wilhelm T1 - Probleme der zerstörungsfreien Materialprüfung PY - 1973 SP - 473 EP - 476 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9681 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wüstenberg, Hermann A1 - Böttcher, Bernhard A1 - Mundry, Eberhard ED - Becker, Gerhard Wilhelm T1 - Einflüsse auf die Echohöhe bei der Ultraschallprüfung PY - 1973 SP - 477 EP - 480 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9682 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wittig, Günther A1 - Stadthaus, Meinhard ED - Becker, Gerhard Wilhelm T1 - Anwendung von Wirbelstromverfahren in der zerstörungsfreien Materialprüfung PY - 1973 SP - 481 EP - 484 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9683 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schnitger, Dierk ED - Becker, Gerhard Wilhelm T1 - Untersuchungen zur Bildqualität technischer Röntgenaufnahmen PY - 1973 SP - 485 EP - 488 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9684 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fieblinger, G. A1 - Nabel, Eberhard ED - Becker, Gerhard Wilhelm T1 - Verfahren zur zerstörungsfreien Untersuchung von Werkstoffeigenschaften PY - 1973 SP - 489 EP - 492 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9685 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gersonde, Martin A1 - Kerner-Gang, Waltraut ED - Becker, Gerhard Wilhelm T1 - Forschungsarbeiten über holzzerstörende Pilze PY - 1973 SP - 373 EP - 376 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9656 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Petrowitz, Hans-Joachim A1 - Buchmann, Charlotte ED - Becker, Gerhard Wilhelm T1 - Die Bedeutung der analytischen Chemie für den Holzschutz PY - 1973 SP - 377 EP - 380 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9657 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Burmester, Arno A1 - Deppe, Hans-Joachim ED - Becker, Gerhard Wilhelm T1 - Kombination von Holz und Holzwerkstoffen mit anderen Stoffen zur Erzielung von Formbeständigkeit, Festigkeitssteigerungen und Schutz gegen Pilze, Insekten und Feuer PY - 1973 SP - 381 EP - 385 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9658 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kirschke, Kurt ED - Becker, Gerhard Wilhelm T1 - Wissenschaftlicher Kurzbericht über die Arbeit der Fachgruppe 5.2 (Rheologie und Tribologie) PY - 1973 SP - 385 EP - 388 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9659 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mewes, H. ED - Becker, Gerhard Wilhelm T1 - Wissenschaftlicher Kurzbericht über die Arbeit des Laboratoriums 5.21 (Rheometrie) PY - 1973 SP - 389 EP - 392 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9660 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Studt, Peter ED - Becker, Gerhard Wilhelm T1 - Kurzbericht über die wissenschaftliche Arbeit des Laboratoriums Schmierstoffe 5.23 PY - 1973 SP - 397 EP - 400 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9662 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst A1 - Habig, Karl-Heinz ED - Becker, Gerhard Wilhelm T1 - Methoden und Ergebnisse der Triboforschung PY - 1973 SP - 401 EP - 404 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9663 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schwarz, Wolfram ED - Becker, Gerhard Wilhelm T1 - Aufgaben und Arbeiten der Fachgruppe 5.3 "Oberflächenphänomene" PY - 1973 SP - 405 EP - 408 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9664 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schwarz, Wolfram ED - Becker, Gerhard Wilhelm T1 - Möglichkeiten des Raster-Elektronenmikroskopes in der Oberflächen-Morphologie PY - 1973 SP - 409 EP - 412 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9665 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hattwig, Martin ED - Becker, Gerhard Wilhelm T1 - Fortpflanzung von Flammen und Detonationen in Gemischen von Chlorkohlenwasserstoffdämpfen mit 02 und N2 PY - 1973 SP - 293 EP - 296 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9636 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Voigtsberger, Paul ED - Becker, Gerhard Wilhelm T1 - Grundlagen für die sicherheitstechnische Beurteilung gastechnischer Anlagen und Verfahren PY - 1973 SP - 297 EP - 300 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9637 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Strese, Günther A1 - Schrödter, Wolfgang ED - Becker, Gerhard Wilhelm T1 - Sicherheitstechnische Probleme bei der Handhabung großer Mengen von Gasen und Flüssigkeiten PY - 1973 SP - 301 EP - 304 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9638 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Conrad, Dietrich ED - Becker, Gerhard Wilhelm T1 - Inertisierung reaktionsfähiger Gassysteme PY - 1973 SP - 305 EP - 308 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9639 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Heinsohn, G. A1 - Wiechmann, Wolfgang ED - Becker, Gerhard Wilhelm T1 - Anforderungen an Gasmeß- und Gaswarngeräte als Mittel des primären Explosionsschutzes PY - 1973 SP - 309 EP - 312 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9640 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Voigtsberger, Paul A1 - Matzkuhn, G. ED - Becker, Gerhard Wilhelm T1 - Sicherheitstechnische Untersuchungen an Lacktrockenanlagen PY - 1973 SP - 313 EP - 316 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9641 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Swart, Karl-Heinz ED - Becker, Gerhard Wilhelm T1 - Explosionsfähige feste und flüssige Stoffe und die Ermittlung ihrer Eigenschaften PY - 1973 SP - 317 EP - 320 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9642 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Haupt, W. ED - Becker, Gerhard Wilhelm T1 - Die Prüfung explosionsfähiger Stoffe auf Schlagempfindlichkeit PY - 1973 SP - 321 EP - 324 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9643 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hahnefeld, K. A1 - Steidinger, Manfred ED - Becker, Gerhard Wilhelm T1 - Sicherheitliche Probleme beim Umgang mit Ammoniumnitrat als Bestandteil von Sprengstoffen und Düngemitteln PY - 1973 SP - 325 EP - 328 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9644 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wandrey, Peter-Andreas A1 - Lemke, Dieter ED - Becker, Gerhard Wilhelm T1 - Über die Prüfung, Beurteilung und Klassifizierung explosionsfähiger Stoffe mit geringer chemischer Beständigkeit PY - 1973 SP - 329 EP - 332 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9645 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schneider, Patrick A1 - Rückward, Werner ED - Becker, Gerhard Wilhelm T1 - Über die Ursachen der Differenz von Schalldämm-Maßen aus Prüfungen nach der Ein- und Zweiraum-Methode PY - 1973 SP - 173 EP - 176 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9606 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Knublauch, Erwin ED - Becker, Gerhard Wilhelm T1 - Der Normbrandversuch zur Ermittlung von Kennwerten für den baulichen Brandschutz PY - 1973 SP - 177 EP - 180 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9607 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Gerhard Wilhelm ED - Becker, Gerhard Wilhelm T1 - Wirtschaftliche Bedeutung und Materialprüfung organischer Stoffe PY - 1973 SP - 181 EP - 184 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9608 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mirisch, Günter A1 - Kuschel, J. ED - Becker, Gerhard Wilhelm T1 - Zur Analyse des Alterungsverhaltens von Wärmeübertragungsölen aus Mineralöl PY - 1973 SP - 185 EP - 188 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9609 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pastuska, Gerhard ED - Becker, Gerhard Wilhelm T1 - Über den Einfluß der Technologie polymerer Werkstoffe auf die Entwicklung der Materialprüfung an Kautschuk, Kunst- und Anstrichstoffen in der Bundesanstalt für Materialprüfung PY - 1973 SP - 189 EP - 192 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9610 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Steiner, N. ED - Becker, Gerhard Wilhelm T1 - Die Charakterisierung von Flächen für das Geräteturnen PY - 1973 SP - 193 EP - 196 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9611 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lützow, Wolfgang ED - Becker, Gerhard Wilhelm T1 - Schwerpunkte der Arbeiten auf dem Gebiet der Kunststoffprüfung in der Bundesanstalt für Materialprüfung PY - 1973 SP - 197 EP - 200 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9612 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Granitza, E. A1 - Krüger, Oswald ED - Becker, Gerhard Wilhelm T1 - Prüfungen zur Beurteilung der Gebrauchstauglichkeit von Kunststoff-Fensterprofilen PY - 1973 SP - 201 EP - 204 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9613 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sickfeld, Jürgen A1 - Wapler, D. ED - Becker, Gerhard Wilhelm T1 - Über das rheologische Verhalten der Anstrichstoffe bei der Verarbeitung PY - 1973 SP - 205 EP - 208 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9614 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meckel, Lothar ED - Becker, Gerhard Wilhelm T1 - Das Brennverhalten von Textilien PY - 1973 SP - 209 EP - 212 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9615 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Oelsner, Günter ED - Becker, Gerhard Wilhelm T1 - Das Korrosionsverhalten von Metallkombinationen PY - 1973 SP - 53 EP - 56 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9576 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rückert, Joachim ED - Becker, Gerhard Wilhelm T1 - Elektrochemische Untersuchungen über öllösliche Korrosionsinhibitoren PY - 1973 SP - 57 EP - 60 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9577 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Paatsch, Wolfgang ED - Becker, Gerhard Wilhelm T1 - Modulations-spektroskopische Untersuchungen an passiven Nickelelektroden PY - 1973 SP - 61 EP - 64 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9578 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stichel, Wolfgang ED - Becker, Gerhard Wilhelm T1 - Die Adsorption inhibierender Anionen an Edelmetallelektroden PY - 1973 SP - 65 EP - 68 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9579 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krawietz, Uwe ED - Becker, Gerhard Wilhelm T1 - Luftverschmutzung und Korrosion - Neue Probleme der Korrosionsprüfung PY - 1973 SP - 69 EP - 72 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9580 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pohl, Heinz ED - Becker, Gerhard Wilhelm T1 - Die Entwicklung der analytischen Chemie auf dem Gebiete der Metall-Analyse PY - 1973 SP - 73 EP - 76 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9581 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Oberhauser, Rolf ED - Becker, Gerhard Wilhelm T1 - Die Aluminiumbestimmung in Stahl unter Anwendung der Säulenchromatographie PY - 1973 SP - 77 EP - 80 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9582 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pohl, Heinz A1 - Wandelburg, Klaus ED - Becker, Gerhard Wilhelm T1 - Die Bestimmung kleiner Arsen-Gehalte in kupferhaltiger Matrix PY - 1973 SP - 81 EP - 84 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9583 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Witte, P. ED - Becker, Gerhard Wilhelm T1 - Vergleichende Untersuchungen zur Ermittlung des biochemischen Sauerstoffbedarfs in Abwässern und des physikalisch gelösten Sauerstoffs in Flußwässern im Rahmen von Umweltschutzmaßnahmen PY - 1973 SP - 85 EP - 88 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9584 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Münchow, Paul ED - Becker, Gerhard Wilhelm T1 - Über die Beseitigung des Matrixeffektes bei der Röntgenfluoreszenz-Analyse von Legierungen PY - 1973 SP - 89 EP - 92 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9585 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beyer, Horst ED - Becker, Gerhard Wilhelm T1 - Beurteilung textiler Bodenbeläge, insbesondere ihrer elektrostatischen Eigenschaften PY - 1973 SP - 213 EP - 216 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9616 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Zimmer, Hubertus ED - Becker, Gerhard Wilhelm T1 - Infrarotspektroskopie und ihre Anwendung in der Textilchemie PY - 1973 SP - 217 EP - 220 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9617 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Milster, Helga ED - Becker, Gerhard Wilhelm T1 - Waschmittel und Waschmaschine als Faktoren beim Waschprozeß PY - 1973 SP - 221 EP - 224 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9618 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rook, A. ED - Becker, Gerhard Wilhelm T1 - Beschichtete flexible textile Flächengebilde und ihre Bewertung PY - 1973 SP - 225 EP - 228 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9619 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Franke, Werner ED - Becker, Gerhard Wilhelm T1 - Zukünftige Aspekte für die Untersuchung von Beschreib-, Bedruck- und Packstoffen PY - 1973 SP - 229 EP - 232 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9620 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Griebenow, W. A1 - Werthmann, Barbara ED - Becker, Gerhard Wilhelm T1 - IR-spektroskopische Erkennung von synthetischen hochmolekularen Papierveredlungsmitteln PY - 1973 SP - 233 EP - 236 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9621 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lemm, K. A1 - Schiewe, Siegfried ED - Becker, Gerhard Wilhelm T1 - Vergleich von Papierfestigkeitsprüfgeräten unterschiedlicher Bauart PY - 1973 SP - 237 EP - 240 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9622 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kallmann, A. ED - Becker, Gerhard Wilhelm T1 - Zur Sicherung der Qualität öffentlicher Urkunden PY - 1973 SP - 241 EP - 244 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9623 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Huhnt, D. A1 - Bremer, E. ED - Becker, Gerhard Wilhelm T1 - Über den Einfluß der klimatischen Vorgeschichte auf einige ausgewählte mechanische Eigenschaften von Papieren PY - 1973 SP - 245 EP - 248 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9624 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Feuerberg, Hubert ED - Becker, Gerhard Wilhelm T1 - Entwicklung und Bedeutung des Bereichs "Sonderprüfverfahren für organische Stoffe" in der BAM PY - 1973 SP - 249 EP - 252 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9625 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Damaschke, Kurt A1 - Hantsche, Harald ED - Becker, Gerhard Wilhelm T1 - Zur Problematik von Oberflächenanalysen PY - 1973 SP - 413 EP - 416 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9666 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schwarz, Wolfram ED - Becker, Gerhard Wilhelm T1 - Probleme der Grenzflächen-Kinetik PY - 1973 SP - 417 EP - 420 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9667 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Teske, Günter ED - Becker, Gerhard Wilhelm T1 - Elektrochemische Konzentrations- und Spurenmessung in Flüssigkeiten und Gasen PY - 1973 SP - 421 EP - 424 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9668 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Richter, Manfred A1 - Terstiege, Heinz ED - Becker, Gerhard Wilhelm T1 - Farbmetrik in Theorie und Praxis PY - 1973 SP - 425 EP - 428 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9669 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Terstiege, Heinz A1 - Mäder, Klaus ED - Becker, Gerhard Wilhelm T1 - Die Entwicklung der Farbmeßtechnik PY - 1973 SP - 429 EP - 432 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9670 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czepluch, Wolf ED - Becker, Gerhard Wilhelm T1 - Zur Problematik der Glanzmessung PY - 1973 SP - 433 EP - 436 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9671 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Hans-Peter ED - Becker, Gerhard Wilhelm T1 - Farbsysteme und Farbtoleranzen PY - 1973 SP - 437 EP - 440 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9672 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Richter, Kerstin ED - Becker, Gerhard Wilhelm T1 - Farbwiedergabe in der Farbphotographie PY - 1973 SP - 441 EP - 444 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9673 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rohrbach, Christof ED - Becker, Gerhard Wilhelm T1 - Zur Beschaffung und Nutzung von Geräten in größeren technisch-wissenschaftlichen Anstalten PY - 1973 SP - 445 EP - 448 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9674 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beck, Winfrid ED - Becker, Gerhard Wilhelm T1 - Information und Dokumentation PY - 1973 SP - 449 EP - 452 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9675 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Melzer, Einhart ED - Becker, Gerhard Wilhelm T1 - Werkstoffprüfmaschinen und Werkstoffprüfanlagen im Spiegel des Gesetzes über technische Arbeitsmittel (Maschinenschutzgesetz) PY - 1973 SP - 571 EP - 574 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9706 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rühl, Karl H. A1 - Schwaigerer, S. T1 - Einführung, Grundbegriffe der Festigkeitslehre PY - 1955 VL - 1 IS - Abschnitt 6/I SP - 836 EP - 837 PB - Ernst CY - Berlin ET - 28., neubearb. AN - OPUS4-9768 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neider, Rudolf ED - Becker, Gerhard Wilhelm T1 - 15 Jahre Nutzung von Radionukliden in der Bundesanstalt für Materialprüfung PY - 1973 SP - 493 EP - 496 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9686 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bartdorff, Dietrich A1 - Jost, Peter A1 - Reimers, Peter ED - Becker, Gerhard Wilhelm T1 - Einsatz von Radionukliden zur Messung der Selbstdiffusion in Silber- und Kupfereinkristallen PY - 1973 SP - 497 EP - 500 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9687 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wündrich, Konrad A1 - Kowalewsky, Helmut ED - Becker, Gerhard Wilhelm T1 - Die Wirkung energiereicher Strahlen auf organische Werkstoffe PY - 1973 SP - 501 EP - 504 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9688 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmitt, B. F. A1 - Dudzus, Thomas ED - Becker, Gerhard Wilhelm T1 - Anwendung von Radionukliden PY - 1973 SP - 505 EP - 508 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9689 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Raddatz, K.-H. A1 - Tamberg, Tomas A1 - Thiele, D. ED - Becker, Gerhard Wilhelm T1 - Kernbrennstoffanalyse in der Bundesanstalt für Materialprüfung (BAM) PY - 1973 SP - 509 EP - 512 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9690 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schönherr, Wolfgang A1 - Barthelmeß, Helmut ED - Becker, Gerhard Wilhelm T1 - Die Fügetechnik in der BAM PY - 1973 SP - 513 EP - 516 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9691 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schönherr, Wolfgang A1 - Florian, Wolfgang A1 - v. der Linden, Heidi ED - Becker, Gerhard Wilhelm T1 - Einfluß von Handschweißstromquellen und Werkstoffanisotropie auf die Güte von Schmelzschweißverbindungen PY - 1973 SP - 517 EP - 520 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9692 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Hans-Joachim ED - Becker, Gerhard Wilhelm T1 - Beitrag zur Bildung der Schnittriefen beim Brennschneiden und zur Bestimmung der Schnittgütewerte PY - 1973 SP - 521 EP - 524 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9693 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nagel, Dieter A1 - Klingenfuß, Heino ED - Becker, Gerhard Wilhelm T1 - Beispiele der Planung und Durchführung von experimentellen Untersuchungen PY - 1973 SP - 525 EP - 528 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9694 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilken, Klaus ED - Becker, Gerhard Wilhelm T1 - Beitrag zur Schadensverhütung durch praxisbezogene Auswertung einer internationalen Sammlung von Sprödbruchschadensfällen PY - 1973 SP - 529 EP - 532 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9695 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfender, Max A1 - Mennigen, Michael ED - Becker, Gerhard Wilhelm T1 - Probleme der Information und Bedeutung des Schrifttums in Wissenschaft und Technik PY - 1973 SP - 533 EP - 536 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9696 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mennigen, Michael ED - Becker, Gerhard Wilhelm T1 - Die Öffentlichkeitsarbeit der Bundesanstalt für Materialprüfung PY - 1973 SP - 537 EP - 540 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9697 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ruske, Walter ED - Becker, Gerhard Wilhelm T1 - Die Entwicklung der Materialprüfungsanstalten bis zum 1. Weltkrieg PY - 1973 SP - 541 EP - 544 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9698 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gerisch, Wolfgang ED - Becker, Gerhard Wilhelm T1 - Zur Verallgemeinerung des Rieszbasis-Begriffes im Hilbertschen Raum PY - 1973 SP - 545 EP - 548 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9699 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Klaus ED - Becker, Gerhard Wilhelm T1 - Taylor-Entwicklungen zur Berechnung des vollständigen elliptischen Integrals dritter Gattung PY - 1973 SP - 548 EP - 549 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9700 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomescheit, Alfred ED - Becker, Gerhard Wilhelm T1 - Vektorielle Durchrechnung von Strahlen durch Rotationsparaboloide, -hyperboloide, -ellipsoide unter besonderer Berücksichtigung optisch einachsiger Kristalle PY - 1973 SP - 550 EP - 554 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9701 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Biermann, M. ED - Becker, Gerhard Wilhelm T1 - Beitrag zur Entwicklung eines Schlauchviskometers PY - 1973 SP - 555 EP - 558 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9702 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Strogies, Wolfgang ED - Becker, Gerhard Wilhelm T1 - Zur Anwendung mathematischer Methoden in der Materialprüfung PY - 1973 SP - 559 EP - 562 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9703 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Heiko ED - Becker, Gerhard Wilhelm T1 - Grundsätzliche Gesichtspunkte für die Bemessung der Bauten im Bauprogramm II der Bundesanstalt PY - 1973 SP - 563 EP - 566 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9704 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Findeisen, Dietmar ED - Becker, Gerhard Wilhelm T1 - Das Baukastensystem der BAM PY - 1973 SP - 567 EP - 570 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9705 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Umstätter, Hans T1 - Schmierprobleme in der Feinwerktechnik T2 - VDI-Tagung CY - Karlsruhe, Deutschland DA - 1954-10-14 PY - 1955 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 2 SP - 51 EP - 54 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-9804 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Selle, Hermann T1 - Die Grundzüge der Verfahren zur Beurteilung brennbarer Industriestäube T2 - VDI-Tagung CY - Augsburg, Deutschland DA - 1955-01-01 PY - 1955 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 7 SP - 63 EP - 67 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-9789 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tödt, Fritz T1 - Neue Ergebnisse elektrochemischer Sauerstoffmessungen T2 - Kongress der Europäischen Föderation für Chemie-Ingenieur-Wesen und zur Achema-Ausstellungstagung für Chemisches Apparatewesen CY - Frankfurt am Main, Deutschland DA - 1955-01-01 PY - 1956 SN - 0070-315X N1 - Serientitel: DECHEMA-Monographien – Series title: DECHEMA-Monographien IS - 27 SP - 328 EP - 336 PB - Verl. Chemie CY - Weinheim, Bergstr. AN - OPUS4-9886 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Scheruhn, Willi ED - Stauch, A. ED - Rögnitz, H. T1 - Geräte zur Gasbeschaffung PY - 1957 VL - 1 IS - Abschnitt 7/IV/A SP - 692 EP - 696 PB - Ernst CY - Berlin ET - 5., neu bearb. und erw. AN - OPUS4-9943 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Umstätter, Hans T1 - Viskosität und Molekulargewicht T2 - Kongress der Europäischen Föderation für Chemie-Ingenieur-Wesen und zur Achema-Ausstellungstagung für Chemisches Apparatewesen CY - Frankfurt am Main, Deutschland DA - 1955-01-01 PY - 1956 SN - 0070-315X N1 - Serientitel: DECHEMA-Monographien – Series title: DECHEMA-Monographien IS - 27 SP - 144 EP - 159 PB - Verl. Chemie CY - Weinheim, Bergstr. AN - OPUS4-9876 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rühl, Karl H. T1 - Der Spannungsfluß in der Konstruktion T2 - VDI-Tagung CY - Stuttgart, Deutschland DA - 1955-01-01 PY - 1957 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 10 SP - 63 EP - 74 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-9912 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Selle, Hermann T1 - Die chemischen und physikalischen Grundlagen der Verbrennungsvorgänge von Stäuben PY - 1957 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 19 SP - 25 EP - 36 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-9948 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Zehr, Joachim T1 - Die physikalische Kennzeichnung der Staubeigenschaften PY - 1957 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 19 SP - 19 EP - 24 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-9949 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Selle, Hermann T1 - Die Grundzüge der Experimentalverfahren zur Beurteilung brennbarer Industriestäube PY - 1957 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 19 SP - 37 EP - 48 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-9951 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Selle, Hermann A1 - Zehr, Joachim T1 - Experimentaluntersuchungen von Staubverbrennungsvorgängen und ihre Betrachtung vom reaktionsthermodynamischen Standpunkt PY - 1957 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 19 SP - 73 EP - 87 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-9952 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Zehr, Joachim T1 - Anleitung zu den Berechnungen über die Zündgrenzwerte und die maximalen Explosionsdrücke PY - 1957 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 19 SP - 63 EP - 68 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-9953 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Heller, I. A1 - Behrens, H. A1 - Gaber, Martin A1 - Müller, Ralf T1 - Wasserdiffusion in Floatglas T2 - 79. Glastechnische Tagung CY - Würzburg, Deutschland DA - 2005-05-23 PY - 2005 SN - 3-921089-43-3 SP - 4 Seiten PB - Deutsche Glastechnische Gesellschaft CY - Offenbach AN - OPUS4-11838 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dantan, Nathalie A1 - Habel, Wolfgang A1 - Wolfbeis, Otto S. ED - Udd, E. T1 - Fiber optic pH sensor for early detection of danger of corrosion in steel-reinforced concrete structures T2 - 12th SPIE International Symposium "Smart Structures and Materials 2005 CY - San Diego, CA, USA DA - 2005-05-06 KW - Korrosion KW - Stahlbeton KW - Monitoring KW - pH KW - Faseroptischer Sensor KW - Langzeitstabilität KW - Indikator KW - Immobilisierung KW - Corrosion KW - Steel-reinforced concrete KW - Fiber optic sensor KW - Long-term stability KW - Indicator KW - Immobilization PY - 2005 SN - 0-8194-5739-6 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 5758 SP - 274 EP - 284 PB - SPIE CY - Bellingham AN - OPUS4-11768 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gloetzl, R. A1 - Hofmann, Detlef A1 - Basedau, Frank A1 - Habel, Wolfgang ED - Udd, E. T1 - Geotechnical Pressure Cell Using a Long-Term Reliable High-Precision Fibre Optic Sensor Head T2 - 12th SPIE International Symposium "Smart Structures and Materials 2005 CY - San Diego, CA, USA DA - 2005-03-06 KW - Pressure sensor KW - Fabry-Pérot interferometer KW - Geotechnics KW - Deformation measurement KW - Long-term stability PY - 2005 SN - 0-8194-5739-6 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 5758 SP - 248 EP - 253 PB - SPIE CY - Bellingham AN - OPUS4-11769 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang A1 - Gutmann, Toivo T1 - Embedded Quasi-distributed Fibre Optic Sensors for Long-term Monitoring of 4,500 kN Rock Anchors in the Eder Gravity Dam in Germany T2 - 2nd International Conference on Structural Health Monitoring and Intelligent Infrastructure CY - Shenzhen, China DA - 2005-11-16 PY - 2006 SN - 0-415-39652-2 VL - 1 SP - 289 EP - 297 PB - Taylor & Francis CY - London AN - OPUS4-11770 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang T1 - Selected Examples of Use of Fibre Optic Sensors in Civil Engineering and Geotechnics T2 - International Symposium on Innovation & Sustainability of Structures in Civil Engineering (ISISS´2005) CY - Nanjing, PR China DA - 2005-11-20 KW - Fibre optic sensor KW - Pressure sensor KW - pH value KW - Corrosion KW - Civil engineering KW - Mortar deformation KW - Concrete shrinkage KW - Long-term stability KW - Reliability KW - Data evaluation PY - 2005 VL - 1 SP - 186 EP - 202 CY - Nanjing AN - OPUS4-11772 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gaber, Martin A1 - Müller, Ralf T1 - Thermal induced release of hydrogen from fused silica T2 - 79. Glastechnische Tagung CY - Würzburg, Deutschland DA - 2005-05-23 PY - 2005 SN - 3-921089-43-3 SP - 4 pages PB - Deutsche Glastechnische Gesellschaft CY - Offenbach AN - OPUS4-11837 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reese, Daniel A1 - Kurth, Jens T1 - Dynamische Materialuntersuchung - Konzeption eines Split-Hopkinson-Stabes T2 - GESA Symposium 2005 CY - Saarbrücken, Deutschland DA - 2005-09-21 PY - 2005 SN - 3-18-091899-3 SN - 0083-5560 N1 - Geburtsname von Reese, Daniel: Klötzer, D. - Birth name of Reese, Daniel: Klötzer, D. N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1899 SP - 85 EP - 92 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-11764 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brekow, Gerhard A1 - Müller, Christina A1 - Tessaro, Ute T1 - Ultraschalluntersuchungen an elektronenstrahl- und reibrührgeschweißten Kupfer-Proben T2 - DGZfP Jahrestagung CY - Rostock, Deutschland DA - 2005-05-02 KW - Ultraschallprüfung KW - Fehlernachweis KW - Tauchtechnik KW - Durchschallungstechnik KW - Referenzverfahren KW - C-Bild-Darstellung PY - 2005 SN - 3-931381-64-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 94-CD SP - 1(?) EP - 7(?) PB - DGZfP CY - Berlin AN - OPUS4-11765 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gohlke, Dirk A1 - Mrasek, Heinz A1 - Erhard, Anton A1 - Matthies, Klaus T1 - Ultraschallschweißnahtprüfung bei Temperaturen bis 200° C T2 - DGZfP-Querschnittseminar des FA Ultraschall "Schweißnahtprüfung im Licht neuer Anforderungen - Regelwerke, neue Fügetechniken, neue Prüftechniken, Automatisierung, Code Cases" CY - Essen, Deutschland DA - 2005-09-14 PY - 2005 SN - 3-931381-67-6 N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 97-CD SP - 1(?) EP - 17(?) PB - DGZfP CY - Berlin AN - OPUS4-11766 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mielke, Werner A1 - Hampe, Andreas A1 - Hoyer, O. A1 - Schumacher, Klaus T1 - Analysis of AE-events from single fibre pull-out experiments T2 - 3rd International Symposium on Acoustic Emission from Composite Materials CY - Paris, France DA - 1989-07-17 PY - 1989 SN - 0-931403-88-X SP - 323 EP - 331 PB - American Soc. for Nondestructive Testing CY - Columbus, Ohio AN - OPUS4-11804 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kautek, Wolfgang A1 - Pentzien, Simone A1 - Krüger, Jörg A1 - König, E. ED - Kautek, W. ED - König, E. T1 - Laser cleaning of ancient parchments T2 - LACONA I CY - Heraklion, Crete, Greece DA - 1995-10-04 PY - 1997 SN - 3-901025-68-5 VL - 18 SP - 69 EP - 78 PB - Mayer CY - Klosterneuburg AN - OPUS4-11784 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Boehm, Rainer A1 - Erhard, Anton A1 - Vierke, Jens T1 - Anwendung von Modellen zur Echohöhenbewertung von Prüfköpfen mit ungewöhnlicher Schwingergeometrie T2 - DGZfP Jahrestagung CY - Rostock, Deutschland DA - 2005-05-02 KW - Zerstörungsfreie Ultraschallprüfung KW - Prüfkopfentwicklung KW - Modellierung PY - 2005 SN - 3-931381-64-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 94-CD SP - 1 EP - 10(?) PB - DGZfP CY - Berlin AN - OPUS4-11928 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ewert, Uwe A1 - Zscherpel, Uwe A1 - Bavendiek, K. T1 - Digitale Radiologie in der ZfP T2 - DGZfP Jahrestagung CY - Rostock, Deutschland DA - 2005-05-02 KW - Industrielle digitale Radiologie KW - ZfP KW - Filmersatz KW - Flachdetektor KW - Bildqualität KW - Signal/Rausch-Verhältnis KW - Kontrastempfindlichkeit PY - 2005 SN - 3-931381-64-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 94-CD SP - 1(?) EP - 10(?) PB - DGZfP CY - Berlin AN - OPUS4-11862 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Osterloh, Kurt A1 - Hasenstab, Andreas A1 - Zscherpel, Uwe A1 - Goebbels, Jürgen A1 - Ewert, Uwe T1 - Non-Destructive Testing of Wood by Radiography N2 - Throughout human history, wood has been used for various purposes: for building shelters, houses and bridges, for manufacturing furniture and household or agricultural appliances (from ploughs to spoons), as burning material or simply as walking sticks. Contemporarily, vast amounts of wood are going into paper production. As a consequence, different qualities of wood are selected appropriately for the various applications. Beams incorporated into buildings and constructions have to be sturdy and durable; boards for furniture are supposed to be free of knots or are expected to have certain ornamental structures. As long as wood is not simply destined for burning it should be free of undesired knots or internal damages such as rot or worm holes. Particularly in cases of infestation with wood destroying fungi that definitely impairs mechanical strength and even may generate hollows such damages are frequently invisible from the outside. Radiographic methods are capable to detect internal damages as well as hidden knots without the need of drilling holes or cutting a specimen to pieces. The most thoroughly method to visualise the interior of a wooden specimen is tomography which shows annual growth rings in their complete circumference and all the knots or damages that might be included. However, some of them as well as patterns of annual rings suitable for dendrological investigations are recognisable with a less laborious method that might be applicable even in the field, i.e. contemporary digital radiography combined with image processing. Samples of lumber shall be presented showing the typical annual ring structures and some infested areas. T2 - MATEST 2005 CY - Opatija, Croatia DA - 2005-10-06 KW - NDT of wood KW - Quality of wood KW - Tomography KW - Presentation of spatial data KW - Digital radiography KW - Image processing KW - Noise KW - On-site radiography PY - 2005 SN - 953-7283-00-3 SP - 108 EP - 119 PB - Croatian Society of Non-Destructive Testing (CrSNDT) CY - Opatija AN - OPUS4-11865 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Osterloh, Kurt A1 - Hasenstab, Andreas A1 - Ewert, Uwe A1 - Krause, Martin A1 - Goebbels, Jürgen T1 - Mobile radiographische Untersuchung von Holz und Bäumen T2 - DGZfP Jahrestagung CY - Rostock, Deutschland DA - 2005-05-02 KW - Digitale Radiographie KW - Mobiles Röntgen PY - 2005 SN - 3-931381-64-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 94-CD SP - 1(?) EP - 8(?) PB - DGZfP CY - Berlin AN - OPUS4-11866 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kautek, Wolfgang A1 - Krüger, Jörg ED - Beyer, E. T1 - Femtosecond pulse laser ablation of metallic, semiconducting, ceramic, and biological materials N2 - Production of holes and grooves of < 30 micrometers diameter with high aspect ratio value is a delicate task either for mechanical tools, or for conventional nanosecond pulse lasers like e.g. pulsed Nd:YAG or excimer lasers. They later tend to cause microcracks extending from an annular melting zone, or substantial disruption, respectively. Experimental results are presented which demonstrate that the development of intense ultrashort pulse laser systems (>> 1012 W cm-2, (tau) < 1 ps) opens up possibilities for materials processing by cold plasma generation and ablation of metals, semiconductors, ceramics, composites, and biological materials. A femtosecond and a nanosecond dye laser with pulse durations of 300 fs (< 200 (mu) J) and 7 ns (< 10 mJ), and center wavelengths at 612 and 600 nm, respectively, both focused on an area of the order of 10-5 cm2, have been applied either to absorbing substrates, like polycrystalline gold, silicon (111), aluminum nitride ceramics, or transparent materials, like synthetic and human dental hydroxyapatite composites, bone material, and human cornea transplants. The fs-laser generates its own absorption in transparent materials by a multiphoton absorption process, and thus forces the absorption of visible radiation. Because the time is too short (< ps) for significant transport of mass and energy, the beam interaction generally results in the formation of a thin plasma layer of approximately solid state density. Only after the end of the subpicosecond laser pulse, it expands rapidly away from the surface without any light absorption and further plasma heating. Therefore, energy transfer (heat and impulse) to the target material, and thermal and mechanical disruption are minimized. In contrast to heat- affected zones (HAZ's) generated by conventional nanosecond pulse lasers of the order of 1 - 10 micrometers , HAZ's of less than 0.02 micrometers were observed. T2 - Conference on Production Line Processes ; Conference on Process Control and Modeling ; Conference on Novel Applications CY - Vienna, Austria DA - 1994-04-05 PY - 1994 SN - 0-8194-1508-1 DO - https://doi.org/10.1117/12.184768 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 2207 SP - 600 EP - 611 PB - SPIE--the International Society for Optical Engineering CY - Bellingham, Wash. AN - OPUS4-11892 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Jörg A1 - Kautek, Wolfgang A1 - Lenzner, M. A1 - Sartania, S. A1 - Spielmann, C. A1 - Krausz, F. ED - Dubowski, J. T1 - Structuring of dielectric and metallic materials with ultrashort laser pulses between 20 fs and 3 ps N2 - Laser-micromachining of barium aluminum borosilicate glass, fused silica and stainless steel has been extended down to a pulse duration of 20 fs generated by a Ti:sapphire laser system at a wavelength of 0.8 micrometer. A systematic study shows that, below 100 fs, an enhanced precision and a substantial decrease of the ablation threshold fluence in comparison to pulse laser processing with pulses in the picosecond and nanosecond range could be achieved. The physical mechanism and the technical relevance of this novel microtechnology is discussed. T2 - Conference CY - San José, CA, USA DA - 1997-02-10 KW - Ablation KW - Laser processing KW - Micromachining KW - Structuring KW - Femtosecond pulse laser KW - Glass KW - Silica KW - Steel PY - 1997 SN - 0-8194-2402-1 DO - https://doi.org/10.1117/12.273740 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 2991 SP - 40 EP - 47 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-11893 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gruber, D. A1 - Husinsky, W. A1 - Grabner, G. A1 - Baumgartner, I. A1 - Scholman, J. A1 - Krüger, Jörg A1 - Kautek, Wolfgang ED - Waidelich, W. T1 - Nano- and Femtosecond-Laser Processing of Human Donor Corneal-Transplants and Lenticules for Corneal Surgery T2 - 12. Internationaler Kongress Laser 95 CY - Munich, Germany DA - 1995-06-01 PY - 1996 SN - 3-540-61316-1 SP - 397 EP - 400 PB - Springer CY - Berlin AN - OPUS4-11895 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gerstberger, Ulf ED - Soize, C. ED - Schueller, G. T1 - Prediction of dynamic loads beneath tunnels due to railway traffic T2 - IMO-WIND: An integrated monitoring system for offshore wind energy turbines CY - Paris, France DA - 2005-09-04 PY - 2005 SN - 90-5966-033-1 SP - 2053 EP - 2058 PB - Millpress CY - Rotterdam AN - OPUS4-11910 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Haupt, P. A1 - Korzen, Manfred ED - Fan, J. ED - Murakami, S. T1 - On the mathematical modelling of material behavior in continuum mechanics T2 - International Conference on Constitutive Laws for Engineering Materials CY - Chongqing, China DA - 1989-08-11 PY - 1989 SN - 0-08-037887-0 SN - 7-8000-3068-7 VL - 1 SP - 456 EP - 459 PB - International Academic Publ. AN - OPUS4-12027 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klobes, Peter A1 - Riesemeier, Heinrich A1 - Meyer, Klaus A1 - Goebbels, Jürgen A1 - Siitari-Kauppi, M. A1 - Hellmuth, K.-H. ED - Gray, W. T1 - Investigation of rock samples using x-ray-microcomputer-tomography before and after mercury intrusion porosimetry N2 - A new method for the physical characterization of rock matrices for use in site investigations of nuclear waste repositories has been developed. The method can provide information needed in the assessment of the performance of the geosphere working as a natural barrier retarding the migration of radionuclides by diffusion into the rock matrix. Most conventional methods for the physical characterization of rocks give only bulk information. The combination of mercury porosimetry and computer tomography can give 3-D data on mineral-specific porosity distributions with additional pore size information. Additionally, limits for mineral-specific internal surface areas can be estimated, which is essential for the assessment of water-rock interaction and reactive interaction with radionuclides (sorption). Results of measurements on granitic rock (granodiorite) from the Baltic shield are discussed and integrated with results by complementary methods. T2 - 20th Materials Research Society Symposium on the Scientific Basis for Nuclear Waste Management CY - Boston, MA, USA DA - 1996-12-02 PY - 1997 SN - 1-558-99369-X SN - 0272-9172 N1 - Serientitel: Materials Research Society symposium proceedings – Series title: Materials Research Society symposium proceedings IS - 465 SP - 863 EP - 870 PB - Materials Research Society CY - Pittsburgh, Pa. AN - OPUS4-11971 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hampe, Andreas A1 - Mielke, Werner A1 - Boro, I. T1 - Charakterisierung von Versagensmechanismen an Einzelfaserproben T2 - DKI-Tagung CY - Darmstadt, Deutschland DA - 1988-04-12 PY - 1988 SN - 3-927090-00-X SP - 45 EP - 48 PB - Deutsches Kunststoff-Institut CY - Darmstadt AN - OPUS4-11950 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klinger, Christian A1 - Ell, Matthias A1 - Bettge, Dirk T1 - Schadensanalysen an Human-Implantaten / Failure Analysis on Human Implants T2 - Schweißen und Schneiden 2005 CY - Essen, Deutschland DA - 2005-09-12 KW - Schadensanalyse KW - Implantate KW - Prothesen KW - Brüche KW - Schwingbruch KW - Failure analysis KW - Implants KW - Prothesis KW - Fracture KW - Fatigue fracture PY - 2005 SN - 3-87155-695-5 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 237 SP - 207 EP - 222 PB - DVS-Verl. CY - Düsseldorf AN - OPUS4-11952 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Paproth, A. A1 - Wolter, Klaus-Jürgen A1 - Friedrich, Jörg Florian A1 - Deltschew, R. T1 - Metal-Polymer Composites for Molded Interconnect Devices (MID) T2 - 55th Electronic Components & Technology Conference CY - Lake Buena Vista, FL, USA DA - 2005-06-01 PY - 2005 SN - 0-7803-8907-7 SP - 6 pages PB - IEEE Service Center CY - Piscataway AN - OPUS4-11945 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Jörg A1 - Kautek, Wolfgang A1 - Staub, M. A1 - Scherer, G.G. ED - Waidelich, W. T1 - Femtosecond-pulse laser micromachining of metal layer composites T2 - 12. Internationalen Kongresses Laser 95 CY - Berlin, Germany DA - 1996-01-01 PY - 1996 SN - 3-540-61316-1 SP - 966 EP - 969 PB - Springer CY - Berlin AN - OPUS4-11958 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Krause, Martin A1 - Lutz, J. A1 - Hillemeier, B. A1 - Rieck, C. T1 - Niederfrequente Ultraschall-Echo-Verfahren und Bohrwiderstandsmessung zur Untersuchung von Holzbauteilen T2 - DGZfP Jahrestagung CY - Rostock, Deutschland DA - 2005-05-02 KW - ZfP an Holzbauteilen KW - Fehlstellen KW - Minderdicken KW - Ultraschallecho-Experimente an Probekörpern KW - Ultraschall-Echo KW - Fäulnis KW - Bauwesen PY - 2005 SN - 3-931381-64-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 94-CD SP - 1(?) EP - 11(?) PB - DGZfP CY - Berlin AN - OPUS4-11960 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Krause, Martin A1 - Hillger, w. A1 - Bühling, L. A1 - Ilse, D. A1 - Hillemeier, B. A1 - Rieck, C. T1 - Luftultraschall und Ultraschall-Echo-Technik an Holz T2 - DGZfP Jahrestagung CY - Rostock, Deutschland DA - 2005-05-02 KW - ZfP an Holzbauteilen KW - Fehlstellen KW - Minderdicken KW - Ultraschallecho-Experimente an Probekörpern KW - Ultraschall-Echo KW - Fäulnis KW - Bauwesen KW - Luftultraschall PY - 2005 SN - 3-931381-64-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 94-CD SP - 1(?) EP - 15(?) PB - DGZfP CY - Berlin AN - OPUS4-11961 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beck, Uwe A1 - Reiners, Georg ED - Kohler, W. T1 - Rauheits- und Energiemessungen an steril-technischen Oberflächen PY - 2005 SN - 3-8163-0506-7 SP - 78 EP - 97 PB - VDMA-Verl. CY - Frankfurt am Main AN - OPUS4-12120 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niino, Hiroyuki A1 - Krüger, Jörg A1 - Kautek, Wolfgang ED - Dubowski, J. ED - Dyer, P. T1 - Photochemical surface modification of polyurethane films with biomaterial by excimer laser processing T2 - 3rd Three-Day Conference on Laser Applications in Microelectronic and Optoelectronic Manufacturing, LAMOM ; LASE ; Photonics West CY - San José, CA, USA DA - 1998-01-26 KW - Laser irradiation surface effects KW - Surface and interface chemistry of polymers KW - Photochemical reactions of biomolecules KW - Biochemical reaction mechanisms and kinetics PY - 1998 SN - 0-8194-2713-6 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 3274 SP - 128 EP - 132 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-12040 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lenzner, M. A1 - Sartania, S. A1 - Spielmann, C. A1 - Krausz, F. A1 - Krüger, Jörg A1 - Kautek, Wolfgang T1 - Nanometer precision material ablation and optical breakdown with sub-10 fs pulses T2 - 11th International Conference on Ultrafast Phenomena CY - Garmisch-Partenkirchen, Germany DA - 1998-07-12 PY - 1998 SN - 3-540-65430-5 SN - 0172-6218 N1 - Serientitel: Springer Series in chemical physics – Series title: Springer Series in chemical physics IS - 63 SP - 313 EP - 315 PB - Springer CY - Heidelberg AN - OPUS4-12042 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lenzner, M. A1 - Sartania, S. A1 - Spielmann, C. A1 - Krausz, F. A1 - Krüger, Jörg A1 - Kautek, Wolfgang T1 - Optical Damage of Dielectrics down to 5 fs T2 - 17th Conference on Lasers and Electro-Optics (CLEO) CY - Baltimore, MD, USA DA - 1997-05-18 PY - 1997 SN - 1-557-52498-X IS - 11 SP - 218 EP - 219 PB - Optical Society of America CY - Washington, DC AN - OPUS4-12043 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Wöstmann, Jens A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Römer, A. A1 - Völkel, W. T1 - Untersuchungen zur zerstörungsfreien Bestimmung des Hohlraumgehaltes von Asphaltschichten T2 - DGZfP-Fachtagung Bauwerksdiagnose "Praktische Anwendungen Zerstörungsfreier Prüfungen" CY - Berlin, Deutschland DA - 2006-02-22 KW - Asphalt KW - Hohlraumgehalt KW - Zerstörungsfreie Prüfung KW - Ultraschallverfahren KW - Ultraschall-Rückstreuung KW - Radarverfahren PY - 2006 SN - 3-931381-71-4 SP - 1(?) EP - 9(?) PB - DGZfP CY - Berlin AN - OPUS4-12116 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schartel, Bernhard A1 - Braun, Ulrike T1 - Mechanisms of Phosphorous Flame Retardants T2 - 12th International Flame Retardants 2006 Conference CY - London, England, UK DA - 2006-02-14 PY - 2006 SN - 0-9541216-7-8 SP - 153 EP - 154 PB - Interscience Communications CY - London AN - OPUS4-12078 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Korzen, Manfred ED - Owen, D. T1 - A numerical method for the integration of a viscoelastic-plastic constitutive model T2 - 2nd International Conference on Computational Plasticity (COMPLAS) CY - Barcelona, Spain DA - 1989-09-18 PY - 1989 SN - 0-906674-71-9 IS - 2 SP - 603 EP - 613 PB - Pineridge Press CY - Swansea AN - OPUS4-12079 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bartscher, M. A1 - Hilpert, U. A1 - Goebbels, Jürgen A1 - Weidemann, Gerd A1 - Puder, H. A1 - Jidav, H.-N. T1 - Einsatz von Computertomografie in der Reverse-Engineering Technologie - Vollständige Prozesskette am Beispiel eines Zylinderkopfes T2 - DGZfP Jahrestagung CY - Rostock, Deutschland DA - 2005-05-02 KW - Computertomografie KW - Reverse Engineering KW - Geometriekontrolle PY - 2005 SN - 3-931381-64-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 94-CD SP - 1 EP - 12(?) PB - DGZfP CY - Berlin AN - OPUS4-12077 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dantan, Nathalie A1 - Habel, Wolfgang A1 - Hillemeier, B. A1 - Hüttl, R. A1 - Dietz, K. T1 - Bauteil-integrierbarer faseroptischer pH-Sensor zur Schadensfrüherkennung im Stahlbeton- und Spannbetonbau T2 - DGZfP-Fachtagung Bauwerksdiagnose "Praktische Anwendungen Zerstörungsfreier Prüfungen" CY - Berlin, Deutschland DA - 2006-02-22 KW - Korrosion KW - Stahlbewehrung KW - Monitoring KW - pH-Optode KW - Langzeitstabilität PY - 2006 SN - 3-931381-71-4 SP - 225 EP - 232 PB - DGZfP CY - Berlin AN - OPUS4-12201 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reuther, H. A1 - Menzel, Michael A1 - Vinnichenko, M. A1 - Kolitsch, A. ED - Garcia, M. T1 - Investigation of the Sn4+ Charge Density Variation in In2O3 using Mössbauer Spectroscopy T2 - International Symposium on the Industrial Application of the Mössbauer Effect CY - Madrid, Spain DA - 2004-10-04 PY - 2005 SN - 0-7354-0250-7 SN - 0094-243X N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings IS - 765 SP - 132 EP - 136 PB - American Inst. of Physics CY - Melville AN - OPUS4-12150 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Grunewald, Thomas T1 - Die Zündquelle "mechanisch erzeugte Funken" am Beispiel von Ventilatoren N2 - Mechanisch erzeugte Funken stellen eine von dreizehn Zündquellenarten dar. Für den Bereich zündfähiger Staub/Luft-Atmosphären wird der Anteil mechanisch erzeugter Funken an Explosionen mit 28 % beziffert, für zündfähige Gas/Luft-Atmosphären kann von einem etwa ähnlich hohem Anteil ausgegangen werden. Diese dreizehn Zündquellenarten finden sich in der europäischen DIN EN 1127-1 und der DIN EN 13463-1, die in den Geltungsbereich der europäischen Richtlinie 94/9/EG (im Sprachgebrauch oft ATEX 100a genannt) eingebunden sind sowie in den deutschen EX-RL / BGR 104. Je nach Gefährdungspotential, gemessen an der Häufigkeit des Auftretens und der Dauer des Verbleibens zündfähiger Atmosphäre, werden die Anforderungen an Geräte und Schutzsysteme zur bestimmungsgemäßen Verwendung in explosionsfähiger Atmosphäre differenziert. Somit werden je nach Gerätekategorie entsprechende Maßnahmen zur Vermeidung von mechanisch erzeugten Funken als Zündquelle erforderlich. Konkrete Werte bezüglich der kinetischen Energien bei Reib-, Schlag- oder Schleifvorgängen, ab welchen zündfähige Funken auftreten können, werden allerdings nicht angegeben. Insbesondere bei schnell drehenden Maschinen wie Ventilatoren waren die mechanisch erzeugten Funken und die Wahl der geeigneten Werkstoffkombinationen bei der Erstellung der prEN 14986 mit dem Titel: "Konstruktion von Ventilatoren für den Einsatz in explosionsgefährdeten Bereichen" ein viel diskutiertes Thema. In dem Beitrag wird die Zündquelle "mechanisch erzeugte Funken" am Beispiel von Ventilatoren unter Berücksichtigung der jeweiligen Zündwirksamkeit und unterschiedlicher Werkstoffpaarungen diskutiert. T2 - "Ventilatoren, Entwicklung - Planung - Betrieb" CY - Braunschweig, Deutschland DA - 2006-03-07 PY - 2006 SN - 3-18-091591-9 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1591 SP - 231 EP - 247 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-12157 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weritz, Friederike A1 - Taffe, Alexander A1 - Schaurich, Dieter A1 - Wilsch, Gerd T1 - Praktische Anwendungen der Laser-Induzierten Plasma Spektroskopie im Bauwesen - Fallstudien an einem Klärbehälter und einem Parkdeck T2 - DGZfP-Fachtagung Bauwerksdiagnose "Praktische Anwendungen Zerstörungsfreier Prüfungen" CY - Berlin, Deutschland DA - 2006-02-22 KW - LIBS KW - Beton PY - 2006 SN - 3-931381-71-4 SP - 1(?) EP - 9(?) PB - DGZfP CY - Berlin AN - OPUS4-12208 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kruschwitz, Sabine A1 - Niederleithinger, Ernst T1 - Charaktersierung von Feuchte- und Salzbelastungen in Baumaterial durch Impedanzspektroskopie T2 - DGZfP-Fachtagung Bauwerksdiagnose "Praktische Anwendungen Zerstörungsfreier Prüfungen" CY - Berlin, Deutschland DA - 2006-02-22 KW - Spektrale Induzierte Polarisation KW - Baumaterial KW - Feuchte KW - Salz PY - 2006 SN - 3-931381-71-4 SP - 1 EP - 8(?) PB - DGZfP CY - Berlin AN - OPUS4-12210 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Redmer, Bernhard A1 - Malitte, Hans-Joachim A1 - Ewert, Uwe T1 - Tomografische Verfahren zur Bestimmung der Tiefenlage von Baustählen in Bauwerken T2 - DGZfP-Fachtagung Bauwerksdiagnose "Praktische Anwendungen Zerstörungsfreier Prüfungen" CY - Berlin, Deutschland DA - 2006-02-22 KW - Durchstrahlungsprüfung KW - Tomografie KW - Bauwerke PY - 2006 SN - 3-931381-71-4 SP - 199 EP - 209 PB - DGZfP CY - Berlin AN - OPUS4-12158 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wendrich, Astrid A1 - Trela, Christiane A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Wöstmann, Jens A1 - Milmann, Boris ED - Mazal, P. T1 - Application of ultrasonic and radar tomography for the investigation of the internal structure of masonry T2 - 3rd International Workshop of NDT Experts CY - Prague, Czech Republic DA - 2005-10-10 KW - Masonry KW - Tomography KW - Ultrasonic KW - Radar KW - Non-destructive testing PY - 2005 SN - 80-2142996-8 SP - 299 EP - 313 PB - Univ. of Technology CY - Brno AN - OPUS4-12273 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molnarne, Maria A1 - Schröder, Volkmar T1 - Biogáz robbanási határainak kiszámítása methán/széndioxid/levegö rendszer robbanási határ adataiból / Estimation of the explosion limits of biogas mixtures by using the explosiondiagram of a methane/carbon dioxide/air system N2 - The knowledge of the explosion limits of biogases in air is necessary to define explosion protection measures. Biogases from agricultural plants vary however in their composition, so that for each gas composition the explosion limits would have to be measured. Frequently the explosion limits of biogas are therefore referred in the safety-relevant literature only to the methane fraction of the gas mixture, without indicating this additionally. This leads to the fact that the explosion ranges for the total mixture consists of methane, carbon dioxide and further residual gases are falsely specified. For this reason a simple method is presented in the following, which show, how the explosion limits of a biogas can be determined from its methane content using an explosion diagram of methane/carbon dioxide/air system. The explosion diagram was measured according to the German Standard DIN 51649-1. The presented calculation method supplies however correct results only if the nitrogen fraction in the biogas does not exceed approx. 5 % by volume. T2 - Conference of Chemical Engineering CY - Veszprém, Hungary DA - 2006-04-25 KW - Biogas KW - CHEMSAFE KW - Explosionsdiagramm KW - Sicherheitstechnische Kenngrößen KW - Explosionsschutz PY - 2006 SN - 963-9495-86-7 IS - 1 SP - 36 EP - 39 PB - Pannon Egyetem CY - Veszprem AN - OPUS4-12298 LA - hun AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Streicher, Doreen A1 - Wiggenhauser, Herbert T1 - Automatisierte zerstörungsfreie Untersuchungen an Spannbetonbrücken T2 - DGZfP-Fachtagung Bauwerksdiagnose "Praktische Anwendungen Zerstörungsfreier Prüfungen" CY - Berlin, Deutschland DA - 2006-02-22 KW - Automatisierte ZfPBau-Verfahren KW - Radar KW - Ultraschallecho KW - Impact-Echo KW - Spannbetonbrücken PY - 2006 UR - http://www.ndt.net/article/bau-zfp2006/v05.pdf SN - 3-931381-71-4 SP - 29 EP - 37 PB - DGZfP CY - Berlin AN - OPUS4-12239 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bremser, Wolfram ED - Ciarlini, P. T1 - Intercomparison reference functions and data correlation structure T2 - 7th Workshop on Advanced Mathematical and Computational Tools in Metrology CY - Caparica, Portugal DA - 2005-06-01 PY - 2006 SN - 981-256674-0 N1 - Serientitel: Series on advances in mathematics for applied sciences – Series title: Series on advances in mathematics for applied sciences IS - 72 SP - 130 EP - 141 PB - World Scientific CY - Singapore AN - OPUS4-12243 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Zunkel, Astrid T1 - Korrodierende Feuerlöschsysteme T2 - 3-Länder-Korrosionstagung, "Korrosion im Bauwesen - Neubau oder sachgerechte Instandsetzung?" CY - Zürich, Schweiz DA - 1006-04-27 KW - Feuerlöschanlagen KW - Brandschutzanlagen KW - Hydrantenanlagen KW - Löschwasserleitungen KW - Sprinkleranlagen KW - Korrosionsschutz PY - 2006 SN - 3-935406-29-0 SP - 136 EP - 143 PB - GfKORR CY - Frankfurt am Main AN - OPUS4-12292 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stöhr, Stefan A1 - Link, M. A1 - Rohrmann, Rolf A1 - Rücker, Werner T1 - Damage detection based on static measurements on bridge structures T2 - 24th International Modal Analysis Conference (IMAC) CY - St. Louis, MO, USA DA - 2006-01-30 KW - Structural Health Monitoring KW - Damage Identification KW - Bridges PY - 2006 SN - 0-912053-94-1 SP - 12 pages PB - Society for Experimental Mechanics CY - St. Lous AN - OPUS4-12311 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Sebastian A1 - Kipphardt, Heinrich A1 - Meckelburg, Angela ED - Angeli, J. T1 - Determination of nitrogen in ferritic electric heating steel ECRM 299-1 T2 - 7th International Workshop "Progress in Analytical Chemistry in the Steel and Metal Industries" CY - Luxembourg DA - 2006-05-16 PY - 2006 SN - 3-7739-6016-6 SP - 409 EP - 413 PB - VGE Verl. GmbH CY - Essen AN - OPUS4-12443 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Röllig, Mathias A1 - Maierhofer, Christiane A1 - Schultz, A. ED - Vincentsen, L. T1 - Bond Control in CFRP-strengthened RC-structures using Active Thermography T2 - Conference on Operation, Maintenance and Rehabilitation of Large Infrastructure Projects, Bridges and Tunnels CY - Copenhagen, Denmark DA - 2006-05-15 KW - Quality control KW - Impulse-Thermography (IR) KW - Debonding KW - Supervision of CFRP-Strengthening KW - Laboratory Testing PY - 2006 SN - 87-91044-03-0 SP - 1(?) EP - 8(?) PB - IABSE CY - Zürich AN - OPUS4-12407 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Korzen, Manfred A1 - Neves, C. A1 - Rodrigues, J.P.C. A1 - Valente, J.C. ED - Vila Real, P. T1 - Behaviour in fire of thermally restrained compressed steel members experimental and numerical approach T2 - 4th International Workshop "Structures in Fire" (SiF´06) CY - Aveiro, Portugal DA - 2006-05-10 KW - Fire Resistance KW - Thermal Restraint PY - 2006 SN - 972-789190-X VL - 1 SP - 273 EP - 286 PB - University of Aveiro AN - OPUS4-12462 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Wiggenhauser, Herbert T1 - Validierung von ZfP-Verfahren im Bauwesen T2 - DGZfP-Fachtagung Bauwerksdiagnose "Praktische Anwendungen Zerstörungsfreier Prüfungen" CY - Berlin, Deutschland DA - 2006-02-22 KW - Validierung KW - Zerstörungsfreie Prüfung im Bauwesen KW - ZfPBau KW - Messunsicherheit KW - GUM KW - DIN 17025 KW - Ultraschall KW - Beton PY - 2006 SN - 3-931381-71-4 SP - 1(?) EP - 9(?) PB - DGZfP CY - Berlin AN - OPUS4-12408 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Simone A1 - Brademann-Jock, Kerstin A1 - Wachtendorf, Volker A1 - Rauth, W. A1 - Klimmasch, T. A1 - Krüger, P. T1 - Analysis of weathering effects in automotive coatings by thermoluminescence T2 - 28th FATIPEC Congress CY - Budapest, Hungary DA - 2006-06-12 KW - Automotive coatings KW - Weathering KW - Thermoluminescence PY - 2006 SP - 1 EP - 9 CY - Budapest AN - OPUS4-12558 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mietz, Jürgen A1 - Burkert, Andreas A1 - Burkert, Annette A1 - Eich, Gerd T1 - Long-term Behaviour of Corrosion Protection Materials for Prestressed Systems T2 - 2nd International fib Congress CY - Naples, Italy DA - 2006-06-05 KW - Prestressed systems KW - Corrosion protection KW - Wax KW - Grease KW - Electrochemical tests PY - 2006 SN - 0-912053-94-1 SP - 12 pages PB - Society for Experimental Mechanics CY - St. Lous AN - OPUS4-12513 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Simone A1 - Wachtendorf, Volker A1 - Rauth, W. A1 - Klimmasch, T. A1 - Krüger, P. T1 - Screening the weathering stability of automotive coatings by chemiluminescence T2 - XXVIIIth FATIPEC Congress CY - Budapest, Hungary DA - 2006-06-12 KW - Automotive coatings KW - Weathering KW - Chemiluminescence PY - 2006 SP - 8 pages CY - Budapest AN - OPUS4-12557 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reinholz, Uwe A1 - Görner, Wolf T1 - Wasserstoffanalytik mit hochenergetischen Ionen - Gute Referenzen KW - Wasserstoff KW - Ionenstrahlanalytik KW - Kernreaktionsanalyse PY - 2006 SN - 3-9809691-1-8 SP - 96 EP - 97 PB - Deutsche Bunsen-Gesellschaft für Physikalische Chemie CY - Frankfurt am Main AN - OPUS4-12647 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stößer, R. A1 - Brenneis, Rudolf A1 - Herrmann, Werner A1 - Steinfeldt, N. ED - Petzow, G. T1 - Nachweis mechanisch induzierter Strukturänderungen bei Druck- bzw. Biegebelastung hochkorundhaltiger Werkstoffe mit Hilfe der Elektronenspinresonanz T2 - Beiträge zum Abschlußkolloquium im Schwerpunktprogramm "Keramische Hochleistungswerkstoffe" der Deutschen Forschungsgemeinschaft CY - Stuttgart, Deutschland DA - 1994-02-17 PY - 1996 SN - 3-527-27138-4 SP - 287 EP - 297 PB - VCH CY - Weinheim AN - OPUS4-12653 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Richter, K. A1 - Kraus, Werner A1 - Nolze, Gert A1 - Peplinski, Burkhard ED - Guczi, L. ED - Solymosi, F. ED - Tétényi, P. T1 - X-ray powder diffracton in situ characterisation of the (Cu, Zn, Al)-hydrotalcite phase in Cu-ZnO-Al2O3-catalysts highly active in methanol synthesis T2 - 10th International Congress on Catalysis CY - Budapest, Hungary DA - 1992-07-19 PY - 1993 SN - 0-444-89621-X SN - 0167-2991 N1 - Serientitel: Studies in surface science and catalysis – Series title: Studies in surface science and catalysis IS - 75 SP - 2806 EP - 2808 PB - Elsevier CY - Amsterdam AN - OPUS4-12601 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jost, H. A1 - Carius, C. A1 - Peplinski, Burkhard ED - Murarka, S. P. T1 - On preparation of crystalline MgO-ceramics from amorphous precursors T2 - Symposium Ca ; MRS Fall Meeting CY - Boston, MA, USA DA - 1993-11-29 PY - 1993 SN - 1-558-99217-0 SN - 0272-9172 N1 - Serientitel: Materials Research Society symposium proceedings – Series title: Materials Research Society symposium proceedings IS - 318 SP - 6 EP - 8 PB - Materials Research Society CY - Pittsburgh, Pa. AN - OPUS4-12602 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bettge, Dirk A1 - Günther, Burkhard A1 - Wedell, Wolfgang A1 - Portella, Pedro Dolabella A1 - Hemptenmacher, J. A1 - Peters, P. W. M. ED - Lütjering, G. T1 - Quantitative Analysis of the Fatigue Damage of Ti-6242/SCS-6 Metal Matrix Composite T2 - 10th World Conference on Titanium CY - Hamburg, Germany DA - 2003-07-13 KW - Ti-MMC KW - Ermüdung KW - Schädigungsmechanik PY - 2003 SN - 3-527-30306-5 VL - 4 SP - 2577 EP - 2584 PB - Wiley-VCH CY - Weinheim AN - OPUS4-11105 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mix, Renate A1 - Friedrich, Jörg Florian A1 - Kühn, Gerhard ED - Mutlu, M. T1 - Adhesion between metal atoms and polymer surfaces fitted with different types and variable density of functional groups T2 - 3rd workshop COST 527 CY - Antalya, Turkey DA - 2004-10-07 KW - Peel strength KW - Aluminium KW - Pulsed plasma KW - Allyl alcohol KW - Allylamine KW - Acrylic acid PY - 2005 SN - 975-491194-0 SP - 106 EP - 114 PB - Hacettepe Univ. Press CY - Ankara AN - OPUS4-11042 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vogl, Jochen ED - Nelms, S. M. T1 - Calibration strategies and quality assurance PY - 2005 SN - 0-8493-2381-9 SP - 147 EP - 181 PB - Blackwell CY - Oxford AN - OPUS4-11048 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Streicher, Doreen A1 - Wiggenhauser, Herbert T1 - Automatisierte zerstörungsfreie Untersuchungen an Spannbetonbrücken N2 - Zusammenfassung: Die zerstörungsfreie Untersuchung von Spannbetonbauwerken mit Radar, Impact-Echo und Ultraschallecho konzentriert sich auf die Ortung von Bewehrung und, wegen der damit verbundenen Korrosionsgefahr, auf die Lokalisierung von Verpressfehlern in Spannkanälen. Für die automatisierte Untersuchung großer Flächen wurden in der BAM – Bundesanstalt für Materialforschung und –prüfung Scannersysteme entwickelt und an mehreren Brückenbauwerken erprobt. Die Messdaten der drei angewendeten Verfahren werden eingehend bearbeitet und miteinander kombiniert. Durch die Kombination der Verfahren kann sowohl die schlaffe Bewehrung als auch Spannbewehrung geortet und können Hinweise auf Verpressfehler gegeben werden. T2 - 3. Symposium Experimentelle Untersuchungen von Baukonstruktionen CY - Dresden, Deutschland DA - 2005-06-23 KW - Automatisierte ZfPBau-Verfahren KW - Radar KW - Ultraschallecho KW - Impact-Echo KW - Spannbetonbrücken PY - 2005 SN - 3-86005-476-7 SP - 15 EP - 26 CY - Dresden AN - OPUS4-11078 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kloß, Heinz A1 - Klaffke, Dieter T1 - Untersuchungen und Modellrechnungen für eine Verschleißprognose metallischer Werkstoffe T2 - 46. Tribologie-Fachtagung "Reibung, Schmierung und Verschleiß CY - Göttingen, Deutschland DA - 2005-09-26 PY - 2005 SN - 3-00-017102-9 VL - I SP - 8/1 EP - 8/9 PB - GfT CY - Moers AN - OPUS4-11081 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mittmann, Hans-Ulrich ED - Hansen, W. ED - Kamiske, G. F. T1 - Akkreditierung und Zertifizierung - Das Konzept der Vertrauensbildung KW - Konformitätsbewertung KW - Akkreditierung KW - Zertifizierung KW - DIN EN ISO/IEC-Normen KW - 17000er Reihe KW - DAR KW - CE-Zeichen KW - Richtlinien PY - 2004 SN - 3-936608-48-2 N1 - Serientitel: Digitale Fachbibliothek – Series title: Digitale Fachbibliothek SP - 1 EP - 34(?) PB - Symposion CY - Düsseldorf AN - OPUS4-11082 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bettge, Dirk A1 - Günther, Burkhard A1 - Wedell, Wolfgang A1 - Portella, Pedro Dolabella A1 - Hemptenmacher, J. A1 - Schurmann, H. T1 - Fatigue behaviour of a titanium matrix composite T2 - Materials Week 2002 ; European Congress on Advanced Materials, their Processes and Applications ; 6th International Conference on Joining Ceramics, Glass and Metal CY - Munich, Germany DA - 2002-09-30 KW - Ti-MMC KW - Ermüdung KW - Schädigungsmechanik PY - 2002 SN - 3-88355-314-X PB - Werkstoff-Informationsges. AN - OPUS4-11108 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Grytsenko, K. P. A1 - Capobianchi, A. A1 - Convertino, A. A1 - Friedrich, Jörg Florian A1 - Schulze, Rolf-Dieter A1 - Ksensov, V. A1 - Schrader, S. ED - Iwamori, S. T1 - Polymer-metal nanocomposite thin film prepared by co-evaporation in a vacuum PY - 2005 SN - 81-7736276-3 SP - 85 EP - 109 PB - Research Signpost CY - Trivandrum, Kerala AN - OPUS4-11225 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mellor, F. A1 - Just, Ulrich A1 - Strumpf, T. T1 - Probenvorbereitung mittels Superkritischer Fluidextraktion (SFE) PY - 1996 SN - 3-928865-21-8 SP - 126 EP - 133 PB - GIT-Verl. CY - Darmstadt AN - OPUS4-11265 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Richter, Klaus ED - Range, H. T1 - Output of 16 step colour scales equally spaced in CIELAB for 8 display contrast ratios T2 - 10. Europäischer Lichtkongress "LUX EUROPA 2005" CY - Berlin, Deutschland DA - 2005-09-20 KW - Informationstechnik KW - Farbgeräte KW - Farbordnung KW - Normen PY - 2005 SN - 3-927787-27-2 SP - 275 EP - 276 PB - LiTG CY - Berlin AN - OPUS4-11342 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Hillemeier, B. A1 - Krause, Martin ED - Bröker, F. T1 - Defect localisation in wood with low frequency ultrasonic echo technique T2 - 14th International Symposium on Nondestructive Testing of Wood CY - Eberswalde, Germany DA - 2005-05-02 PY - 2005 SN - 3-8322-3949-9 SP - 331 EP - 336 PB - Shaker CY - Aachen AN - OPUS4-11307 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz A1 - Rohrmann, Rolf A1 - Rücker, Werner A1 - Said, Samir T1 - Fahrzeug-Fahrweg-Untergrund-Umgebung: theoretische, rechnen- und meßtechnische Untersuchungen T2 - VDI-Tagung CY - Würzburg, Deutschland DA - 1987-06-01 PY - 1987 SN - 3-18-090635-9 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 635 SP - 59 EP - 87 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-11511 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Arndt, Ralf A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Hillemeier, B. A1 - Rieck, C. A1 - Scheel, H. A1 - Walther, A. T1 - Struktur- und Feuchteuntersuchungen von Bauteil- und Bauwerksoberflächen mit der Impuls-Thermografie T2 - Thermografie-Kolloquium der DGZfP CY - Stuttgart, Deutschland DA - 2005-09-22 KW - Impulse-Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Beton KW - Mauerwerk PY - 2005 SN - 3-931381-68-4 N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 98-CD SP - 1(?) EP - 12(?) PB - DGZfP CY - Berlin AN - OPUS4-11491 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz ED - Brandes, K. ED - Vogel, A. T1 - Seismic response of three-dimensional structures using a green's function approach to the soil T2 - 2nd International Seminar on Earthquake Prognostics CY - Berlin, Germany DA - 1986-06-24 PY - 1986 SN - 3-528-06323-8 N1 - Serientitel: Progress in earthquake prediction research – Series title: Progress in earthquake prediction research IS - 3 SP - 393 EP - 403 PB - Vieweg CY - Braunschweig AN - OPUS4-11541 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz ED - Steinwachs, M. T1 - Verkehrserschütterungen: Ursachen, Ausbreitungsgesetze und Einwirkung auf Gebäude T2 - Jahrestagung der Deutschen Gesellschaft für Erdbeben-Ingenieurwesen und Baudynamik CY - Hannover, Deutschland DA - 1986-10-08 PY - 1988 SN - 0-87849-078-7 N1 - Serientitel: DGEB-Publikation – Series title: DGEB-Publikation IS - 3 SP - 199 EP - 215 PB - Trans Tech Publ. CY - Clausthal-Zellerfeld AN - OPUS4-11542 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz A1 - Rücker, Werner ED - Klapperich, H. ED - Cazuffi, D. ED - Koerner, R. T1 - Dynamic loads of railway traffic T2 - ECI International Conference on The Use of Geosynthetics in Soil Reinforcement and Dynamics CY - Dresden, Germany DA - 2005-09-05 PY - 2005 SN - 3-7739-6003-4 SP - 433 EP - 443 PB - Verl. Glückauf CY - Essen AN - OPUS4-11547 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bohse, Jürgen T1 - Interpretation von Schallemissionssignalen bei faserverstärkten Polymeren T2 - 15. Kolloquium Schallemission 2005 "Statusberichte zur Entwicklung und Anwendung der Schallemissionsanalyse" CY - Berlin, Deutschland DA - 2005-11-17 PY - 2005 SN - 3-931381-69-2 N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 99-CD SP - 1 EP - 17 PB - DGZfP CY - Berlin AN - OPUS4-11549 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz T1 - Zur Erschütterungsausbreitung im Boden und im Gebäude unter Berücksichtigung der Erregerkräfte und von Bodenschichtungen T2 - VDI-Schwingungstagung '94 CY - Veitshöchheim, Deutschland DA - 1994-09-27 PY - 1994 SN - 3-18-091145-X SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1145 SP - 1 EP - 17 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-11574 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz ED - Soize, C. ED - Schueller, G. T1 - Simplified methods for wave propagation and soil-structure interaction: The dispersion of layered soil and the approximation of FEBEM results T2 - IMO-WIND: An integrated monitoring system for offshore wind energy turbines CY - Paris, France DA - 2005-09-04 PY - 2005 SN - 90-5966-033-1 SP - 1303 EP - 1308 PB - Millpress CY - Rotterdam AN - OPUS4-11576 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Segebade, Christian A1 - Hedrich, Martina A1 - Görner, Wolf A1 - Bode, P. T1 - The Problem of Large Samples - The Analysis of Electronic Waste Material N2 - Large-volume instrumental photon and neutron activation analysis (IPAA resp. INAA) was used for investigation of shredded electronic waste material. Sample masses from 1 to 150 grams were analysed to obtain an estimate of the minimum sample size to be taken to achieve a representativeness of the results which is satisfactory for a defined investigation task. Furthermore, the influence of irradiation and measurement parameters upon the quality of the analytical results were studied. Finally, the analytical data obtained from IPAA and instrumental neutron activation analysis (INAA), both carried out in a large-volume mode, were compared. Values within the limits of satisfactory agreement were found only partially. Analytical process control using on-site X-ray fluorescence analysis performed during recycling of electronic waste is currently under development. T2 - European Metallurgical Conference (EMC 2005) CY - Dresden, Germany DA - 2005-09-18 KW - Analysis KW - Electronic scrap KW - WEEE KW - Sampling KW - Process control KW - Recycling PY - 2005 SN - 3-935797-22-2 VL - 4 SP - 1645 EP - 1655 PB - GDMB-Medienverl. CY - Clausthal-Zellerfeld AN - OPUS4-11005 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Schultrich, B. A1 - Weihnacht, V. T1 - Reibungs- und Verschleißverhalten von dünnen ta-C-Schichten in verschiedenen Umgebungsmedien; zum Einfluss des Gegenkörperwerkstoffs T2 - GfT-Jahrestagung Tribologie CY - Göttingen, Deutschland DA - 2005-09-26 KW - Kohlenstoff-Schichten KW - Luftfeuchte KW - Gegenkörperwerkstoff KW - Vakuum KW - Stickstoff PY - 2005 SN - 3-00-017102-9 SP - 33/1 EP - 33/12 PB - GfT CY - Moers AN - OPUS4-11024 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter T1 - Tribologisches Verhalten verschiedener metallischer Werkstoffe in Salzwasser T2 - GfT-Jahrestagung Tribologie CY - Göttingen, Deutschland DA - 2005-09-26 KW - Salzwasser KW - Rostfreier Stahl KW - Tribokorrosion KW - Titanlegierung PY - 2005 SN - 3-00-017102-9 SP - 42/1 EP - 42/10 PB - GfT CY - Moers AN - OPUS4-11025 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hartelt, Manfred A1 - Klaffke, Dieter T1 - Fretting-Verhalten keramischer Werkstoffe bei kleinen Schwingweiten und Normalkräften - Mesotribologie T2 - GfT-Jahrestagung Tribologie CY - Göttingen, Deutschland DA - 2005-09-26 KW - Keramik KW - Luftfeuchte Fretting PY - 2005 SN - 3-00-017102-9 SP - 36/1 EP - 36/10 PB - GfT CY - Moers AN - OPUS4-11026 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vermesan, O. A1 - Blystad, L.-C. A1 - Bahr, R. A1 - Froelich, B. A1 - Ullate, L.G. A1 - Martinez, O. A1 - Fritsch Yusta, C. A1 - Guey, J.-L. A1 - Fleury, G. A1 - Liang, K. A1 - Mercier, D. A1 - Schoeb, P. A1 - Mc Hugh, Jarlath T1 - High temperature phased array ultrasonic system with integrated front end electronics T2 - IEEE Ultrasonics Symposium CY - Rotterdam, Netherlands DA - 2005-09-18 PY - 2005 SN - 0-7803-9382-1 VL - 1 SP - 186 EP - 189 PB - IEEE Operations Center CY - Piscataway, NJ AN - OPUS4-10993 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brandes, K. A1 - Daum, Werner A1 - Buchhardt, Frank T1 - Methodische Symbiose von Messung und mechanischer Analyse beim Langzeit-Monitoring von Spannbetonbrücken T2 - GESA Symposium 2005 CY - Saarbrücken, Deutschland DA - 2005-09-21 KW - Langzeit-Monitoring KW - Modellgestützte Messverfahren KW - Vergleich von Modell und Messung KW - Lagrangesche Methode PY - 2005 SN - 3-18-091899-3 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1899 SP - 137 EP - 151 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-10995 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Schneider, Thomas A1 - Brand, J. A1 - Wittorf, R. T1 - Tribologisches Verhalten von DLC-Schichten in wässrigen Salzlösungen T2 - GfT-Jahrestagung Tribologie CY - Göttingen, Deutschland DA - 2005-09-26 KW - DLC-Schichten KW - Salzwasser KW - Korrosion KW - Schwingungsverschleiß PY - 2005 SN - 3-00-017102-9 SP - 34/1 EP - 34/10 PB - GfT CY - Moers AN - OPUS4-11027 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Binkowski, Sigrid A1 - Woydt, Mathias A1 - Dietrich, E. T1 - Ungewöhnliche Aufhärtung des 100Cr6 in einem ausgefallenen Keramik-Hybrid-Wälzlager T2 - 39. Metallographie-Tagung CY - Erlangen, Deutschland DA - 2005-09-14 PY - 2005 SN - 3-88355-343-3 SN - 0343-3579 N1 - Serientitel: Sonderbände der praktischen Metallographie – Series title: Sonderbände der praktischen Metallographie IS - 37 SP - 247 EP - 252 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-11180 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mix, Renate A1 - Kühn, Gerhard A1 - Friedrich, Jörg Florian ED - Mittal, K. L. T1 - Contribution of chemical interactions between Al atoms and different types of functional groups to the adhesion of Al-polymer systems T2 - 2nd International Symposium on Adhesion Aspects of Thin Films CY - Orlando, FL, USA DA - 2003-12-15 KW - Al-functional group interactions KW - Adhesion-promoting plasma polymer layers KW - Pulsed plasma polymerization PY - 2005 SN - 90-6764-421-8 VL - 2 SP - 123 EP - 144 PB - VSP CY - Utrecht AN - OPUS4-11156 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gründer, Klaus-Peter A1 - Quercetti, Thomas T1 - Einsatz der Photogrammetrie zur Bestimmung von Deckelverschiebungen im Rahmen der sicherheitstechnischen Beurteilung von Behältern für radioaktive Stoffe T2 - GESA-Symposium 2005 : Strukturanalyse CY - Saarbrücken, Deutschland DA - 2005-09-21 PY - 2005 SN - 3-18-091899-3 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1899 SP - 261 EP - 268 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-11471 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ritter, Martin A1 - Hemmleb, Matthias A1 - Hohenberg, H. ED - Luhmann, T. T1 - Kalibrierung unterschiedlicher 3D-Messmethoden mit einem vielseitig einsetzbaren Kalibrierobjekt T2 - 4. Oldenburger 3D-Tage CY - Oldenburg, Deutschland DA - 2005-02-02 KW - 3D-Mikroskopie KW - AFM KW - SEM KW - CLSM KW - Kalibrierung PY - 2005 UR - http://www.m2c-calibration.com/veroeff/O3D2005_Ritter.pdf SN - 3-87907-420-8 VL - 4 SP - 66 EP - 73 PB - Wichmann CY - Heidelberg AN - OPUS4-11474 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rücker, Werner A1 - Auersch, Lutz A1 - Gerstberger, Ulf A1 - Meinhardt, Christian ED - Soize, C. ED - Schueller, G. T1 - A practical method for the prediction of railway vibration T2 - IMO-WIND: An integrated monitoring system for offshore wind energy turbines CY - Paris, France DA - 2005-09-04 PY - 2005 SN - 90-5966-033-1 SP - 601 EP - 606 PB - Millpress CY - Rotterdam AN - OPUS4-11577 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz ED - Chouw, N. T1 - Zur erschütterungsmindernden Wirkung von Schichten im Boden T2 - Workshop Wave '94 CY - Bochum, Deutschland DA - 1994-12-08 PY - 1994 SN - 3-922741-44-4 SP - 189 EP - 199 PB - Berg-Verl. CY - Bochum AN - OPUS4-11578 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz T1 - Some effects of the layering of the soil on wave propagation and foundation vibrations T2 - Soil dynamics and earthquake engineering VII CY - Southampton, England, UK DA - 1995-05-01 PY - 1995 SN - 1-85312-315-3 SP - 283 EP - 290 CY - Southampton AN - OPUS4-11579 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bettge, Dirk A1 - Günther, Burkhard A1 - Wedell, Wolfgang A1 - Portella, Pedro Dolabella A1 - Hemptenmacher, J. A1 - Peters, P. W. M. ED - Pandey, A. B. T1 - Fatigue Damage of Ti-6242/SCS-6 Metal Matrix Composite T2 - 2nd Affordable metal matrix composites for high-performance applications ; Materials Science & Technology Meeting CY - Chicago, IL, USA DA - 2003-11-09 KW - Ti-MMC KW - Ermüdung KW - Schädigungsmechanik PY - 2003 SN - 0-87339-557-3 SP - 81 EP - 90 PB - TMS CY - Warrendale, Pa. AN - OPUS4-11666 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Niederleithinger, Ernst ED - Alexander, M. T1 - Non-destructive techniques for the condition assessment of railway bridges T2 - International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR) CY - Cape Town, South Africa DA - 2005-11-21 KW - Sustainable bridges KW - Non-destructive Testing KW - Quality assurance KW - Repair PY - 2005 SN - 0-415-39654-9 N1 - Serientitel: Balkema proceedings and monographs in engineering, water and earth sciences – Series title: Balkema proceedings and monographs in engineering, water and earth sciences SP - 163-165 / 429-435 (CD-ROM) PB - Taylor & Francis CY - London AN - OPUS4-11679 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Schaurich, Dieter A1 - Weritz, Friederike A1 - Wilsch, Gerd ED - Alexander, M. T1 - Chloride and sulphate content in concrete with Laser-Induced Breakdown Spectroscopy (LIBS) T2 - International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR) CY - Cape Town, South Africa DA - 2006-11-21 KW - LIBS KW - Chloridgehalt KW - Schwefelgehalt KW - Bauwerksuntersuchung KW - Zustandsermittlung KW - Betoninstandsetzung KW - Betonschäden PY - 2006 SN - 0-415-39654-9 N1 - Serientitel: Balkema proceedings and monographs in engineering, water and earth sciences – Series title: Balkema proceedings and monographs in engineering, water and earth sciences SP - 519 EP - 524 PB - Taylor & Francis CY - London AN - OPUS4-11682 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Maierhofer, Christiane T1 - Quantitative Untersuchung von Fehlstellen in Beton mit der Impuls-Thermografie und der Puls-Phasen-Thermografie T2 - Thermographie-Kolloquium 2005 CY - Stuttgart, Deutschland DA - 2005-09-22 KW - Impulse-Thermografie KW - Puls-Phasen-Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Beton KW - Fehlstellen PY - 2005 SN - 3-931381-68-4 N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 98-CD SP - 1(?) EP - 13(?) PB - DGZfP CY - Berlin AN - OPUS4-11684 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kunte, Hans-Jörg ED - Gunde-Cimerman, N. ED - Oren, A. ED - Plemenitas, A. T1 - K+ Transport and its Role for Osmoregulation in a Halophilic Member of the Bacteria Domain: Characterization of the K+ Uptake Systems from Halomonas elongata KW - Osmoregulation KW - Potassium KW - Glutamate KW - Potassium transport KW - TrkH KW - TrkA KW - Trkl KW - Halomonas elongata KW - Halophilic Bacteria PY - 2005 SN - 1-402-03632-9 N1 - Serientitel: Cellular Origin, Life in Extreme Habitats and Astrobiology – Series title: Cellular Origin, Life in Extreme Habitats and Astrobiology IS - 9 SP - 289 EP - 300 PB - Springer CY - Berlin AN - OPUS4-11668 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kautek, Wolfgang A1 - Krüger, Jörg ED - Brieger, M. T1 - Femtosecond-pulse laser microstructuring of semiconducting materials T2 - 1st International Symposium on Semiconductor Processing and Characterization with Lasers - Applications in Photovoltaics CY - Stuttgart, Germany DA - 1994-04-18 KW - Femtosecond-Pulse Laser KW - Subpicosecond-Pulse Laser KW - Laser-Ablation KW - Multi-Photon Absorption KW - Microstructuring KW - Dry Etching KW - Semiconductors KW - Silicon PY - 1995 SN - 0-87849-683-1 SN - 0255-5476 N1 - Serientitel: Materials science forum – Series title: Materials science forum IS - 173/174 SP - 17 EP - 22 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-11671 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kautek, Wolfgang A1 - Sorg, N. A1 - Krüger, Jörg ED - Brieger, M. T1 - Optical second-harmonic generation (SHG) on semiconductor electrodes by means of femtosecond and nanosecond-pulse lasers N2 - In situ optical second-harmonic generation (SHG) on centrosymmetric crystalline semiconductor electrodes opens up a new field of in situ investigations of hurried solid state interfaces and metal front contacts relevant to electronic and photovoltaic devices, which are rarely accessible by other methods. Photoelectrochemical nanosecond- and femtosecond-pulse laser investigations of silicon (111) electrodes show that in situ SHG is feasible in such complex interfacial systems. In a p-p polarization configuration, the azimuthal dependence of the SHG from oxide-covered and bare n-Si (111) electrodes, with and without Ni contact deposits, have been studied. Etching and regrowth of silicon oxides as well as burried interfacial electric field distributions were monitored. In situ SHG is shown to be extremely sensitive to trapped interfacial charge, crystal misorientations and surface step arrays. An advantage of femtosecond-pulses is the fact that illumination fluences that are well below the damage threshold, but still with sufficient power density, can be applied. (Author) T2 - 1st International Symposium on Semiconductor Processing and Characterization with Lasers - Applications in Photovoltaics CY - Stuttgart, Germany DA - 1994-04-18 KW - Femtosecond-Pulse Laser KW - Sub-Picosecond-Pulse Laser KW - Semiconductors KW - Silicon KW - Second-Harmonic Generation KW - SHG KW - Nonlinear Electroreflectance KW - Etch Process KW - Oxide KW - Interfacial Electronic States KW - Fermi-Level Pinning KW - MOS Diode PY - 1995 SN - 0-87849-683-1 DO - https://doi.org/10.4028/www.scientific.net/MSF.173-174.285 SN - 0255-5476 N1 - Serientitel: Materials science forum – Series title: Materials science forum IS - 173/174 SP - 285 EP - 290 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-11672 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Korzen, Manfred A1 - Ziener, Kai-Uwe A1 - Kühnast, Uwe A1 - Magonette, G. A1 - Buchet, Ph. A1 - Dzbikowicz, Z. ED - Virdi, K. T1 - Substructuring in fire engineering PY - 2000 SN - 0-419-25960-0 SP - 137 EP - 141 PB - spon CY - London AN - OPUS4-11675 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Skopp, André A1 - Woydt, Mathias A1 - Igartua, A. A1 - Areitioaurtena, O. A1 - Seyfert, C. A1 - Luther, R. T1 - Tribological Performance of Bio-No-Tox Lubricants and New Triboactive Materials for Piston Ring/Cylinder Liner System T2 - 9. Symposium Nachwachsende Rohstoffe für die Chemie; 4th International Green-Tech Conference CY - Potsdam, Germany DA - 2005-02-02 PY - 2005 SN - 3-7843-3372-9 N1 - Serientitel: Schriftenreihe nachwachsende Rohstoffe – Series title: Schriftenreihe nachwachsende Rohstoffe IS - 27 SP - 165 EP - 179 PB - Landwirtschaftsverl. CY - Münster AN - OPUS4-11692 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - König, H. A1 - Fröhlich, J. A1 - Hertel, Horst ED - König, H. ED - Varma, A. T1 - Diversity and lignocellulolytic activities of cultured microorganisms KW - Termites KW - Digestion KW - Microorganisms KW - Paunch PY - 2006 SN - 978-3-540-28180-1 DO - https://doi.org/10.1007/3-540-28185-1_11 SN - 1613-3382 N1 - Serientitel: Soil Biology – Series title: Soil Biology IS - 6 SP - 271 EP - 301 PB - Springer CY - Berlin AN - OPUS4-11695 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Schors, Jörg T1 - Direkte iterative Rekonstruktion von computer-tomographischen Trajektorien (DIRECTT) T2 - DGZfP Jahrestagung CY - Rostock, Deutschland DA - 2005-05-02 KW - Neues Prinzip der computer-tomographischen Rekonstruktion ohne Fourier-Filterung PY - 2005 SN - 3-931381-64-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 94-CD SP - 1 EP - 8(?) PB - DGZfP CY - Berlin AN - OPUS4-11697 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hentschel, Manfred P. A1 - Lange, Axel A1 - Schors, Jörg A1 - Wald, Oliver ED - Geer, R. T1 - X-Ray Diffraction Topography images materials by molecular probe T2 - Testing, Reliability, and Application of Micro- and Nano-Material Systems II CY - San Diego, CA, USA DA - 2005-03-08 KW - X-ray diffraction KW - X-ray topography KW - X-ray microscopy KW - Texture KW - Polymers KW - Composites KW - Ceramics KW - Compounds KW - Molecular probe KW - Non-metallics PY - 2005 SN - 0-8194-5747-7 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 5766 SP - 9 EP - 14 PB - SPIE CY - Bellingham AN - OPUS4-11700 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hoffmann, Dirk ED - Venzmer, H. T1 - Praxis- und Laborversuche zur Wirksamkeit von Verfahren zur Abdichtung von Mauerwerk gegen aufsteigende Feuchtigkeit T2 - 7. Dahlberg-Kolloquium, Injektionsmittelabdichtung CY - Wismar, Deutschland DA - 2006-09-14 KW - Trockenlegung von Mauerwerk KW - Labor- und Praxisversuche KW - Neues Laborverfahren zur Wirksamkeitskontrolle PY - 2006 SN - 3-345-00891-2 SP - 67 EP - 76 PB - Verlag für Bauwesen CY - Berlin AN - OPUS4-13085 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Qiao, Linan A1 - Wieser, Günter A1 - Zencker, Uwe A1 - Droste, Bernhard T1 - Dynamische Analyse eines mit Stoßdämpfern ausgerüsteten Gefahrgutbehälters beim 9 m - Fallversuch T2 - 18. ABAQUS-Benutzerkonferenz 2006 CY - Erfurt, Deutschland DA - 2006-09-18 KW - Gefahrgutbehälter KW - Fallversuch KW - Finite-Elemente-Methoden PY - 2006 SP - 1 EP - 11(?) PB - ABAQUS CY - Aachen AN - OPUS4-13207 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klobes, Peter T1 - Gasadsorption and mercury porosimetry on porous model glasses KW - Rock porosity KW - Nanoporous solids KW - Diffusion KW - Gasadsorption KW - Mercury porosimetry KW - C-14-PMMA impregnation KW - Nuclear waste disposal PY - 2006 SN - 952-478135-2 SN - 0785-9325 N1 - Serientitel: STUK-YTO-TR – Series title: STUK-YTO-TR IS - 215 SP - 1 EP - 45 PB - STUK CY - Helsinki AN - OPUS4-13197 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Isecke, Bernd A1 - Beck, Matthias ED - Betoniyhdistys, S. T1 - Experimental investigations on the propagation of reinforcement corrosion T2 - European Symposium on Service Life and Serviceability of Concrete Structures (ESCS-2006) CY - Espoo, Finland DA - 2006-06-12 KW - Concrete formulas KW - Corrosion propagation KW - Electrochemical measurements KW - Polarisation resistance PY - 2006 SN - 952-507579-6 SP - 276 EP - 281 PB - Concrete Assoc. of Finland CY - Helsinki AN - OPUS4-13523 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beck, Matthias A1 - Burkert, Andreas A1 - Isecke, Bernd ED - Stark, J. T1 - Modellierung von Bewehrungskorrosion - Betontechnologische Einflüsse auf elektrochemische Parameter T2 - 16. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2006-09-20 KW - Korrosion von Stahl in Beton KW - Zement-, Chlorid-, Wasser/Bindemitteleinfluss KW - Potentialverlauf KW - Polarisationswiderstand PY - 2006 SN - 3-00-018263-2 IS - 1 SP - 1-1199 - 1-1206 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-13525 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gräfe, Boris A1 - Krause, Martin T1 - Basic investigation with air-coupled ultrasonic echo for concrete elements T2 - NDE Conference on Civil Engineering CY - St. Louis, Missouri, USA DA - 2006-08-14 KW - Air-coupled ultrasound KW - Ultrasonic echo KW - Concrete PY - 2006 SN - 1-57117-148-7 SP - 480 EP - 487 PB - ASTM CY - St. Louis AN - OPUS4-13762 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Daum, Werner ED - Czichos, Horst ED - Tetsuya Saito, ED - Leslie Smith, T1 - Structural Health Monitoring - Embedded Sensors KW - Measurement Methods for Composition and Structure KW - Measurement Methods for Material Properties KW - Measurement Methods for Material Performance, Modelling and Simulation Methods PY - 2006 SN - 978-3-540-20785-6 IS - Part D / 16.6 SP - 875 EP - 890 PB - Springer CY - Berlin AN - OPUS4-13985 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Wiggenhauser, Herbert T1 - Ermittlung der Messunsicherheit bei der Validierung von ZfP-Verfahren im Bauwesen T2 - "Messunsicherheit praxisgerecht bestimmen" CY - Erfurt, Deutschland DA - 2006-11-13 KW - Messunsicherheit KW - Dickenmessung KW - Fundamente KW - Ultraschallecho KW - Zerstörungsfreie Prüfung im Bauwesen KW - Validierung PY - 2006 SN - 3-18-091947-7 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1947 SP - 327 EP - 336 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-13929 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dantan, Nathalie A1 - Höhse, Marek A1 - Karasyov, A.A. A1 - Wolfbeis, Otto S. ED - Fischerauer, G. T1 - Entwicklung einer pH-Optode zur Früherkennung korrsoionsgefährdender Zustände in Stahlbeton T2 - XX. Messtechnisches Symposium des Arbeitskreises der Hochschullehrer für Messtechnik e.V. CY - Bayreuth, Deutschland DA - 2006-10-05 KW - Korrosion KW - Stahlbeton KW - Monitoring KW - pH KW - Faseroptischer Sensor PY - 2006 SN - 3-8322-5419-6 SP - 93 EP - 103 PB - Shaker CY - Aachen AN - OPUS4-13930 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kneipp, Janina ED - Kneipp, K. T1 - Nanosensors Based on SERS for Applications in Living Cells PY - 2006 SN - 3-540-33566-8 SN - 0303-4216 N1 - Serientitel: Topics in applied physics – Series title: Topics in applied physics IS - 103 SP - 335 EP - 350 PB - Springer CY - Berlin AN - OPUS4-13936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - von Oertzen, Alexander A1 - Schreck, Andreas T1 - A study on properties of fireworks report compositions T2 - 8th International Symposium on Fireworks CY - Shiga, Japan DA - 2006-04-18 KW - Feuerwerk KW - Klassifizierung KW - Blitzknallsatz PY - 2005 SN - 0-9734123-2-1 SP - 352 EP - 358 PB - International Symposium on Fireworks Society CY - Nova Scotia, Canada AN - OPUS4-14016 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ullner, Robert A1 - Reese, Daniel T1 - Monte-Carlo Simulation zur Messunsicherheitsbewertung von Ergebnissen, die mit neuronalen Netzen aus der instrumentierten Eindringprüfung erzielt werden T2 - "Messunsicherheit praxisgerecht bestimmen" CY - Erfurt, Deutschland KW - Eindringprüfung KW - Neuronale Netze KW - Messunsicherheit PY - 2006 SN - 3-18-091947-7 N1 - Geburtsname von Reese, Daniel: Klötzer, D. - Birth name of Reese, Daniel: Klötzer, D. N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1947 SP - 87 EP - 99 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-13989 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ullner, Robert T1 - Messunsicherheit in der instrumentierten Eindringprüfung T2 - Härteprüfung 2006 : Praxis, Trends und Innovationen CY - Berlin, Deutschland DA - 2006-11-20 KW - Messunsicherheit KW - Eindringprüfung KW - Härte KW - Spannungs-Dehnungskurve PY - 2006 SN - 3-18-091948-5 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1948 SP - 41 EP - 50 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-13990 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hässelbarth, Werner ED - Czichos, Horst ED - Tetsuya Saito, ED - Leslie Smith, T1 - Reference Procedures KW - Reference procedures KW - Reference methods KW - Measurement quality KW - Traceability PY - 2006 SN - 978-3-540-20785-6 SP - 75 EP - 84 PB - Springer CY - Berlin AN - OPUS4-13718 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schalau, Bernd A1 - Schmidt, Dirk ED - Kreysa, G. T1 - Kritische Bewertung der Einflussfaktoren einer QRA am praktischen Beispiel T2 - 44. Tutzing-Symposion CY - Tutzing, Deutschland DA - 2006-03-12 KW - Quantitative Risikoanalyse KW - Störfall-Verordnung PY - 2006 SN - 3-89746-079-3 SN - 0934-4969 N1 - Serientitel: Praxis der Sicherheitstechnik – Series title: Praxis der Sicherheitstechnik IS - 7 SP - 227 EP - 239 PB - DECHEMA CY - Frankfurt am Main AN - OPUS4-13721 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias T1 - Alternative Werkstoffe und Beschichtungen für die Kolbengruppe geschmiert von alternativen Motorenölen PY - 2006 SN - 3-87480-226-4 SP - 40 EP - 45 PB - Leuze CY - Bad Saulgau AN - OPUS4-13710 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Konersmann, Rainer ED - Kreysa, G. T1 - Die Vorteile der QRA bei der Abschätzung des externen Risikos für Flughäfen T2 - 44. Tutzing-Symposion CY - Tutzing, Deutschland DA - 2006-03-12 KW - Quantitative Risikoanalyse KW - Externes Risiko Flughäfen KW - Generierung von Daten PY - 2006 SN - 3-89746-079-3 SN - 0934-4969 N1 - Serientitel: Praxis der Sicherheitstechnik – Series title: Praxis der Sicherheitstechnik IS - 7 SP - 319 EP - 345 PB - DECHEMA CY - Frankfurt am Main AN - OPUS4-13714 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weritz, Friederike A1 - Taffe, Alexander A1 - Schaurich, Dieter A1 - Wilsch, Gerd ED - Cruz, P. ED - Frangopol, D. T1 - Chloride determination for condition assessment and quality assurance by LIBS T2 - 3rd International Conference on Bridge Maintenance, Safety and Management - "Bridge Maintenance, Safety, Management, Life-Cycle Performance and Cost" CY - Porto, Portugal DA - 2006-07-16 KW - LIBS KW - Chloride KW - Concrete PY - 2006 SN - 0-415-40315-4 N1 - Serientitel: Balkema proceedings and monographs in engineering, water and earth sciences – Series title: Balkema proceedings and monographs in engineering, water and earth sciences SP - 333 EP - 334 PB - Taylor & Francis CY - London AN - OPUS4-13716 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang T1 - Neue Möglichkeiten der Zustandsüberwachung durch strukturintegrierte faseroptische Sensoren PY - 2006 SN - 3-18-401656-0 VL - 18 SP - 51 EP - 65 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-13688 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mehdianpour, Milad ED - Proske, D. T1 - Tragfähigkeitsbewertung aus Versuchen - Probenanzahl versus Aussagesicherheit T2 - 4th International Probabilistic Symposium CY - Berlin, Germany DA - 2006-10-12 PY - 2006 SN - 3-00-019232-8 SP - 71 EP - 83 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-13692 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rücker, Werner A1 - Krüger, F. A1 - Savidis, S. A1 - Auersch, Lutz ED - Aubram, D. T1 - Ein umfassendes Prognoseprogramm für Erschütterungen T2 - 2. Hans Lorenz Symposium CY - Berlin, Deutschland DA - 2006-10-12 PY - 2006 SN - 3-7983-2024-1 N1 - Serientitel: Veröffentlichungen des Grundbauinstitutes der technischen Universität Berlin – Series title: Veröffentlichungen des Grundbauinstitutes der technischen Universität Berlin IS - 40 SP - 159 EP - 170 PB - TU Berlin CY - Berlin AN - OPUS4-13736 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Epishin, Alexander A1 - Link, T. A1 - Brückner, Udo A1 - Klingelhöffer, Hellmuth A1 - Portella, Pedro Dolabella T1 - The effect of high temperature creep damage on low cycle fatigue of CMSX-4 T2 - 8th Liège Conference "Materials for Advanced Power Engineering 2006" CY - Liege, Belgium DA - 2006-01-01 KW - Superalloys KW - CMSX-4 KW - Single crystal KW - Creep KW - Fatigue PY - 2006 SN - 3-89336-436-6 N1 - Serientitel: Schriften des Forschungszentrums Jülich - Reihe Energietechnik / Energy Technology – Series title: Schriften des Forschungszentrums Jülich - Reihe Energietechnik / Energy Technology IS - 53 SP - 317 EP - 325 PB - Forschungszentrum Jülich CY - Jülich AN - OPUS4-13701 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Epishin, Alexander A1 - Link, T. A1 - Brückner, Udo T1 - Microstructural stability of CMSX-4 and CMSX-10 under high temperature creep conditions T2 - 8th Liège Conference "Materials for Advanced Power Engineering 2006" CY - Liege, Belgien DA - 2006-01-01 KW - Superalloys KW - CMSX-4 KW - Creep KW - Microstructure KW - CMSX-10 PY - 2006 SN - 3-89336-436-6 N1 - Serientitel: Schriften des Forschungszentrums Jülich - Reihe Energietechnik / Energy Technology – Series title: Schriften des Forschungszentrums Jülich - Reihe Energietechnik / Energy Technology IS - 53 SP - 507 EP - 520 PB - Forschungszentrum Jülich CY - Jülich AN - OPUS4-13702 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meinhardt, Christian A1 - Rücker, Werner T1 - Abbildung von Geschossdecken und Unterzügen bei numerischen Berechnungen zur Erschütterungsprognose T2 - Baudynamik : Tagung CY - Kassel, Germany DA - 2006-05-17 PY - 2006 SN - 3-18-091941-8 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1941 SP - 29 EP - 42 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-14048 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz T1 - Methoden und Phänomene der Gebäudedynamik - Baugrund-, Fundament- und Deckenschwingungen T2 - Messunsicherheit praxisgerecht bestimmen : Grundlagen, Praxisbeispiele CY - Kassel, Germany DA - 17.05.2006 PY - 2006 SN - 3-18-091947-7 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1941 SP - 761 EP - 765 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-14051 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz A1 - Said, Samir A1 - Rücker, Werner T1 - Schwingungsminderung zwischen Quelle und Empfänger - FEM-Berechnung der Wellenausbreitung im Boden T2 - Messunsicherheit praxisgerecht bestimmen CY - Kassel, Germany DA - 17.05.2006 PY - 2006 SN - 3-18-091947-7 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1941 SP - 425 EP - 434 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-14052 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gerstberger, Ulf A1 - Auersch, Lutz A1 - Meinhardt, Christian A1 - Rücker, Werner T1 - Ein einfach handhabbares Prognoseprogramm für Schienenverkehrserschütterungen T2 - Baudynamik CY - Kassel, Germany DA - 17.05.2006 PY - 2006 SN - 3-18-091941-8 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1941 SP - 19 EP - 28 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-14053 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thiel, A. A1 - Eberstein, Markus A1 - Reinsch, Stefan A1 - Müller, Ralf A1 - Deubener, J. A1 - Schiller, Wolfgang Arno T1 - Viskosität von sinternden Glas/Kristallphasen-Kompositen T2 - 80. Glastechnische Tagung CY - Dresden, Deutschland DA - 2006-06-12 PY - 2006 SN - 3-921089-46-8 SP - 1(?) EP - 3(?) PB - Verl. d. Dt. Glastechn. Ges. CY - Offenbach AN - OPUS4-14045 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schumacher, G. A1 - Darowski, N. A1 - Zizak, I. A1 - Klingelhöffer, Hellmuth A1 - Chen, W. A1 - Neumann, W. ED - Chandra, T. T1 - Time dependence of y/y' Lattice Mismatch in Creep-deformed Single Crystal Superalloy SC16 at 1173 K T2 - 5th International Conference on Processing & Manufacturing of Advanced Materials CY - Vancouver, Canada DA - 2006-07-04 KW - Superalloys KW - Lattice distortion KW - SC16 KW - Creep-deformation KW - X-ray diffraction PY - 2007 SN - 0-87849-428-6 SN - 0255-5476 N1 - Serientitel: Materials science forum – Series title: Materials science forum VL - 539-543/3 IS - 539/543 SP - 3059 EP - 3063 PB - Trans Tech Publ. CY - Stafa-Zürich AN - OPUS4-14032 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schumacher, G. A1 - Darowski, N. A1 - Zizak, I. A1 - Klingelhöffer, Hellmuth A1 - Chen, W. A1 - Neumann, W. ED - Chandra, T. T1 - Temperature Dependence of Lattice Distortion in Strongly Creep-deformed Single Crystal Superalloy SC16 T2 - 5th International Conference on Processing & Manufacturing of Advanced Materials CY - Vancouver, Canada DA - 2006-07-04 KW - Superalloys KW - SC16 KW - Lattice distortion KW - Creep-deformation KW - X-ray-diffraction PY - 2007 SN - 0-87849-428-6 SN - 0255-5476 N1 - Serientitel: Materials science forum – Series title: Materials science forum VL - 539-543/3 IS - 539/543 SP - 3048 EP - 3052 PB - Trans Tech Publ. CY - Stafa-Zürich AN - OPUS4-14033 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - von Oertzen, Alexander T1 - Fireworks Classification Tests with Extended Instrumentation - Results from a European Research Project (CHAF) T2 - 8th International Symposium on Fireworks CY - Shiga, Japan DA - 2005-04-18 KW - Feuerwerk KW - Klassifizierung KW - CHAF KW - UN-Prüfungen PY - 2005 SN - 0-9734123-2-1 SP - 342 EP - 350 PB - International Symposium on Fireworks Society CY - Nova Scotia, Canada AN - OPUS4-14018 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - von Oertzen, Alexander T1 - CHAF tests - radiation measurements T2 - 9th International Symposium on Fireworks CY - Berlin, Germany DA - 2006-04-03 KW - Feuerwerk KW - UN-Prüfungen KW - Gefahrgut KW - CHAF PY - 2006 SN - 0-9734123-4-8 SP - 475 EP - 482 CY - Berlin AN - OPUS4-14021 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - von Oertzen, Alexander A1 - de Jong, E.G. T1 - Blast effects of fireworks explosions T2 - 9th International Symposium on Fireworks CY - Berlin, Deutschland DA - 2006-04-03 KW - Feuerwerk KW - UN-Prüfungen KW - Gefahrgut KW - CHAF PY - 2006 SN - 0-9734123-4-8 SP - 465 EP - 474 CY - Berlin AN - OPUS4-14023 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - von Oertzen, Alexander T1 - CHAF UN-Tests - Enhanced instrumentation in 6(B)-tests T2 - 9th International Symposium on Fireworks CY - Berlin, Germany DA - 2006-04-03 KW - Feuerwerk KW - UN-Prüfungen KW - Gefahrgut KW - CHAF PY - 2006 UR - http://www.isfireworks.com/ SN - 0-9734123-4-8 SP - 375 EP - 385 CY - Berlin AN - OPUS4-14025 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Unger, Wolfgang A1 - Oran, Umut A1 - Senoner, Mathias A1 - Schmidt, M. T1 - Chemische Charakterisierung von mikro- und nanotechnologischen Bauteilen: Verfahrensentwicklung und Referenzmaterialien T2 - VDI/VDE-Tagung "Messtechnik für Mikro- und Nano-Engineering" CY - Erlangen, Germany DA - 2006-11-29 KW - Referenzmaterial KW - Mikrofluidik KW - Nanoanalytik PY - 2006 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1950 SP - 197 EP - 206 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-14110 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang ED - Inaudi, D. T1 - Guidelines and Standards for Fiber Optic Sensors - Quo vadis? T2 - Smart structures and materials 2006: Smart sensor monitoring systems and applications CY - San Diego, CA, USA DA - 2006-02-26 KW - Fiber optic sensor KW - Guideline KW - Validation KW - Test method KW - Characterization KW - Structural monitoring KW - Materials investigation PY - 2006 SN - 0-8194-6220-9 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 6167 SP - 61671A-1-61671A-9 PB - SPIE CY - Bellingham AN - OPUS4-14113 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Trappe, Volker A1 - Hentschel, Manfred P. A1 - Ivers, Heinz ED - Gdoutos, E. T1 - Determination of inter-fibre-failure in complex, reinforced composites T2 - 16th European Conference of Fracture "Fracture of Nano and Engineering Materials and Structures" CY - Alexandroupolis, Greece DA - 2006-07-03 PY - 2006 SN - 1-402-04971-4 IS - 900_tra SP - 1 EP - 8(?) PB - Springer CY - Dordrecht AN - OPUS4-14183 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hemmleb, Matthias A1 - Weritz, Friederike A1 - Maierhofer, Christiane A1 - Schiemenz, A. T1 - Schadensdiagnose an Bauwerksoberflächen mit multispektralen Methoden T2 - DGZfP-Fachtagung Bauwerksdiagnose "Praktische Anwendungen Zerstörungsfreier Prüfungen" CY - Berlin, Deutschland DA - 2006-02-22 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Multispektraler Laserscanner KW - Multispektralklassifizierung KW - Bauwerksoberflächen PY - 2006 SN - 3-931381-71-4 SP - 1(?) EP - 13(?) PB - DGZfP CY - Berlin AN - OPUS4-14119 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Röllig, Mathias T1 - Aktive Thermografie zur zerstörungsfreien Ortung von Ablösungen und Fehlstellen in Beton und Mauerwerk T2 - DGZfP-Fachtagung Bauwerksdiagnose "Praktische Anwendungen Zerstörungsfreier Prüfungen" CY - Berlin, Deutschland DA - 2006-02-22 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Aktive Thermografie KW - Beton KW - Historisches Mauerwerk KW - Praktische Anwendungen PY - 2006 SN - 3-931381-71-4 SP - 1 EP - 12(?) PB - DGZfP CY - Berlin AN - OPUS4-14120 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Krause, Martin T1 - Ultraschall-Echo-Technik zur Ortung von Minderdicken und Schäden in Holzbauteilen T2 - DGZfP-Fachtagung Bauwerksdiagnose "Praktische Anwendungen Zerstörungsfreier Prüfungen" CY - Berlin, Deutschland DA - 2006-02-22 KW - Zerstörungsfreie Prüfung KW - Holz KW - Ultraschallecho KW - ZfP an Holzbauteilen KW - Fehlstellen KW - Minderdicken KW - Ultraschall-Echo KW - Fäulnis KW - Bauwesen PY - 2006 SN - 3-931381-71-4 SP - 1(?) EP - 11(?) PB - DGZfP CY - Berlin AN - OPUS4-14233 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Streicher, Doreen A1 - Mayer, K. T1 - Ultrasonic Reflection Properties at Interfaces Between Concrete Steel and Air: Imaging and Modelling T2 - NDE Conference on Civil Engineering CY - St. Louis, Missouri, USA DA - 2006-08-14 KW - Ultrasonic echo KW - Concrete PY - 2006 SN - 1-57117-148-7 SP - 472 EP - 479 PB - ASTM CY - St. Louis AN - OPUS4-14239 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gaal, Mate A1 - Müller, Christina ED - Proske, D. T1 - Statistical design of experiments applied to tests of metal detectors used for mine detection T2 - 4th International Probabilistic Symposium CY - Berlin, Germany DA - 2006-10-12 KW - Zuverlässigkeit in der Minensuche KW - Feldtests KW - Modulares Modell KW - Metalldetektor PY - 2006 SN - 3-00-019232-8 SP - 253 EP - 264 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-14297 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brehm, K. A1 - Grätz, Rainer A1 - Klütsch, F. T1 - Im Explosionsschutz nichts Neues? Erste Erfahrungen mit der Anwendung der Normenreihe EN 13463 T2 - 8. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Deutschland DA - 2006-11-09 KW - Europäische Richtlinien KW - Normung KW - Beschaffenheitsanforderungen KW - Nichtelektrische Geräte KW - Explosionsschutz KW - Prozessanlagen PY - 2006 SN - 3-936415-48-X SP - 1(?) EP - 11(?) PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-14361 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Shokouhi, Parisa A1 - Gucunski, N. A1 - Wiggenhauser, Herbert T1 - Using Impact Echo for Nondestructive Detection of Delamination in Concrete Bridge Decks T2 - NDE Conference on Civil Engineering CY - St. Louis, Missouri, USA DA - 2006-08-14 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Impact-Echo PY - 2006 SN - 1-57117-148-7 SP - 285 EP - 292 PB - ASTM CY - St. Louis AN - OPUS4-14367 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiggenhauser, Herbert T1 - Bauwerksdiagnose mit zerstörungsfreien Prüfverfahren - Einführung und neue Entwicklungen T2 - DGZfP-Fachtagung Bauwerksdiagnose "Praktische Anwendungen Zerstörungsfreier Prüfungen" CY - Berlin, Deutschland DA - 2006-02-22 KW - Zerstörungsfreie Prüfung im Bauwesen PY - 2006 SN - 3-931381-71-4 SP - 1 EP - 4(?) PB - DGZfP CY - Berlin AN - OPUS4-14374 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Vielhaber, J. ED - Cruz, P. ED - Frangopol, D. T1 - Bond quality survey of loaded RC beams with CFRP-plate repair using impulse-thermography T2 - Bridge Maintenance, Safety, Management, Life-Cycle Performance and Cost CY - Porto, Portugal DA - 2006-07-16 KW - Thermography KW - Quality control KW - Bonding KW - Carbon fibre KW - Concrete bridges KW - Repair KW - Strengthening PY - 2006 SN - 0-415-40315-4 N1 - Serientitel: Balkema proceedings and monographs in engineering, water and earth sciences – Series title: Balkema proceedings and monographs in engineering, water and earth sciences SP - 331-332 (Book)/ 9 pages (CD-ROM) PB - Taylor & Francis CY - London AN - OPUS4-14412 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maksymowicz, M. A1 - Cruz, P.J.S. A1 - Bien, J. A1 - Helmerich, Rosemarie ED - Cruz, P. ED - Frangopol, D. T1 - Concrete railway bridges - taxonomy of degradation mechanisms and damages identified by NDT methods T2 - Bridge Maintenance, Safety, Management, Life-Cycle Performance and Cost CY - Porto, Portugal DA - 2006-07-16 KW - Sustainability KW - Bridges KW - Degradation mechanisms KW - Taxonometry KW - Non-Destructive Testing PY - 2006 SN - 0-415-40315-4 N1 - Serientitel: Balkema proceedings and monographs in engineering, water and earth sciences – Series title: Balkema proceedings and monographs in engineering, water and earth sciences SP - 943-944 (Book)/ 8 pages (CD-ROM) PB - Taylor & Francis CY - London AN - OPUS4-14413 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Täljsten, B. A1 - Helmerich, Rosemarie ED - Cruz, P. ED - Frangopol, D. T1 - Sustainable bridges: A European funded project for higher load and speed on railway bridges - WP6 repair and strengthening T2 - Bridge Maintenance, Safety, Management, Life-Cycle Performance and Cost CY - Porto, Portugal DA - 2006-07-16 KW - Sustainability KW - Bridges KW - Repair KW - Strengthening KW - Reinforced Concrete KW - Quality control KW - Non-Destructive Testing PY - 2006 SN - 0-415-40315-4 N1 - Serientitel: Balkema proceedings and monographs in engineering, water and earth sciences – Series title: Balkema proceedings and monographs in engineering, water and earth sciences SP - 339-340 (Book)/ 8 pages (CD-ROM) PB - Taylor & Francis CY - London AN - OPUS4-14417 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Werner ED - Kuwano. J., ED - Jinicji, K. T1 - Geosynthetic drain elements for landfill cappings: Long-term water flow capacity and long-term shear strength T2 - 8th International Conference on Geosynthetics CY - Yokohama, Japan DA - 2006-09-18 KW - GCD KW - Water flow capacity KW - Shear strength KW - Long-term behaviour KW - Aging KW - Landfill cappings PY - 2006 SN - 90-5966-044-7 SP - 321 EP - 324 PB - Millpress CY - Rotterdam AN - OPUS4-14430 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Taffe, Alexander ED - Venzmer, H. T1 - Zur Anwendung des Ultraschall-Echoverfahrens an Bauteilen aus Holz und Beton T2 - 17. Hanseatische Sanierungstage 2006 "Messen und Sanieren" CY - Kühlungsborn, Deutschland DA - 2006-11-09 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Ultraschall an Holz KW - Kernfäule KW - Ultraschall an Beton PY - 2006 SN - 3-345-00906-4 N1 - Serientitel: Bundesverband Feuchte- und Altbausanierung e.V. – Series title: Bundesverband Feuchte- und Altbausanierung e.V. IS - 17 SP - 225 EP - 234 PB - Huss-Medien CY - Berlin AN - OPUS4-14432 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Erhard, Anton A1 - Czichos, Horst ED - Czichos, Horst ED - Tetsuya Saito, ED - Leslie Smith, T1 - Nondestructive Evaluation KW - Nondestructive inspection KW - Nondestructive testing KW - Ultrasonic examination KW - Magnetic particle inspection KW - Liquid penetrant inspection KW - Eddy-current testing PY - 2006 SN - 978-3-540-20785-6 SP - 832 EP - 844 PB - Springer CY - Berlin AN - OPUS4-14437 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hedrich, Martina A1 - Heine, Hans-Joachim T1 - Referenzgasgemische - aber mit Sicherheit! T2 - "Messunsicherheit praxisgerecht bestimmen" CY - Erfurt, Deutschland DA - 2006-11-13 KW - Referenzgasgemische KW - Gravimetrie KW - Ergebnisunsicherheit PY - 2006 SN - 3-18-091947-7 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1947 SP - 267 EP - 277 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-14391 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg ED - Chandra, T. T1 - Improvement of Materials Efficiency for a Sustainable Resource Management T2 - 5th International Conference on Processing & Manufacturing of Advanced Materials CY - Vancouver, Canada DA - 2006-07-04 KW - Materials efficiency KW - Total materials requirement KW - Waste mining KW - Producing industry PY - 2007 SN - 0-87849-428-6 SN - 0255-5476 N1 - Serientitel: Materials science forum – Series title: Materials science forum VL - 539-543/3 IS - 539/543 SP - 2305 EP - 2310 PB - Trans Tech Publ. CY - Stafa-Zürich AN - OPUS4-14442 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Unger, Wolfgang A1 - Oran, Umut A1 - Swaraj, Sufal A1 - Lippitz, Andreas ED - Chandra, T. T1 - Ageing studies of plasma deposited organic films by surface chemical analysis (ESCA, ToF-SIMS, XAS) T2 - 5th International Conference on Processing & Manufacturing of Advanced Materials CY - Vancouver, Canada DA - 2006-07-04 KW - Plasma polymerized organic films KW - Ageing phenomena KW - ESCA KW - TOF-SIMS KW - XAS PY - 2007 SN - 0-87849-428-6 SN - 0255-5476 N1 - Serientitel: Materials science forum – Series title: Materials science forum VL - 539-543 IS - 539/543 SP - 623 EP - 628 PB - Trans Tech Publ. CY - Stafa-Zürich AN - OPUS4-14446 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Martin A1 - Krause, Ulrich T1 - Eine verbesserte Methode zur Bestimmung der Selbstentzündungstemperaturen brennbarer Stäube T2 - 8. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Deutschland DA - 2006-11-09 KW - Selbstentzündung KW - Brennbare Schüttgüter KW - Sicherheitstechnische Kenngrößen PY - 2006 SN - 3-936415-48-X SP - 1 EP - 13 PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-14478 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ludwig, Jörg A1 - Konersmann, Rainer A1 - Balke, Christian A1 - Kühl, Christiane T1 - The behavior of storage tanks for LPG in the case of fire T2 - 1st International Scientific Conference "Safety Engineering 2006" CY - Ostrava, Czech Republic DA - 2006-10-17 KW - BLEVE KW - Liquefied gas KW - Hazard radii KW - Fire protection KW - Disaster control KW - Fire brigades PY - 2006 SN - 80-248-1185-5 SP - 119 EP - 128 PB - VSB - Technical University of Ostrava, Faculty of Safety Engineering CY - Ostrava AN - OPUS4-14519 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ewert, Uwe A1 - Jaenisch, Gerd-Rüdiger A1 - Osterloh, Kurt A1 - Zscherpel, Uwe ED - Czichos, Horst ED - Tetsuya Saito, ED - Leslie Smith, T1 - Industrial Radiology KW - Fundamentals KW - Particle-Based Radiological Methods KW - Film Radiography KW - Digital Radiological Methods KW - Public Safety and Security PY - 2006 SN - 978-3-540-20785-6 SP - 844 EP - 858 PB - Springer CY - Berlin AN - OPUS4-14473 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - August, Hans ED - Holzlöhner, U. T1 - Abdichtungssysteme mit Asphalt KW - Deponie KW - Abdichtung PY - 1994 SN - 3-89429-475-2 SN - 0938-5533 SP - 185 EP - 210 PB - Wirtschaftsverl. NW CY - Bremerhaven ET - 2. AN - OPUS4-14490 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - August, Hans ED - Woebcken, W. T1 - Erfahrungen mit der Gütesicherung von duroplastischen Formmassen und Formteilen PY - 1988 SN - 3-446-14418-8 N1 - Serientitel: Kunststoff-Handbuch – Series title: Kunststoff-Handbuch IS - 10 SP - 377 EP - 384 PB - Hanser CY - München ET - 2., völlig neubearb. AN - OPUS4-14495 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - August, Hans ED - Fehlau, K.-P. T1 - Anforderungen an Kunststoffdichtungsbahnen in Deponieabdichtungssystemen T2 - Tagung Fortschritte der Deponietechnik CY - Essen, Deutschland DA - 1988-05-03 PY - 1988 SN - 3-503-02757-2 SN - 0171-175X N1 - Serientitel: Abfallwirtschaft in Forschung und Praxis – Series title: Abfallwirtschaft in Forschung und Praxis IS - 23 SP - 97 EP - 110 PB - E. Schmidt CY - Berlin AN - OPUS4-14496 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - August, Hans A1 - Lüders, Günter ED - August, H. ED - Holzlöhner, U. ED - Meggyes, T. T1 - Untersuchung der Langzeitbeständigkeit von Schutzmaterialien für Kunststoffdichtungsbahnen von Deponiebasisabdichtungen PY - 1998 SN - 3-540-63846-6 IS - 36 SP - 313 EP - 323 PB - Springer CY - Berlin AN - OPUS4-14497 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Holzlöhner, Ulrich A1 - August, Hans T1 - Pollutant Transport PY - 1995 SN - 0-9518806-3-2 SP - I1 EP - I21 PB - Penshaw Press CY - Sunderland AN - OPUS4-14498 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - August, Hans T1 - Liner Systems Incorporating Asphalt PY - 1995 SN - 0-9518806-3-2 SP - P1 EP - P41 PB - Penshaw Press CY - Sunderland AN - OPUS4-14499 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sippel, J. A1 - Siegesmund, S. A1 - Weiss, Thomas A1 - Nitsch, K.-H. A1 - Korzen, Manfred ED - Prikryl, R. T1 - Decay of natural stones caused by fire damage T2 - European Geosciences Union General Assembly conference CY - Vienna, Austria DA - 2005-04-25 KW - 66Natural building stones KW - Fire resistance KW - Thermal expansion KW - Mineral reactions PY - 2007 SN - 1-86239-218-8 SN - 0305-8719 N1 - Serientitel: Geological Society special publication – Series title: Geological Society special publication IS - 271 SP - 139 EP - 151 PB - Geological Society CY - London AN - OPUS4-14722 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg ED - Landau, K. T1 - Materialeffizienz KW - Materialeffizienz KW - Resourcenproduktivität PY - 2007 SN - 978-3-87247-655-5 SP - 812 EP - 815 PB - Gentner CY - Stuttgart AN - OPUS4-14619 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiggenhauser, Herbert T1 - Advanced NDT methods and damage assessment in concrete structures - Part I T2 - Advanced Course on Non-Destructive Testing and Evaluation of Concrete Structures CY - Chennai, India DA - 2007-01-17 PY - 2007 SN - 81-8424-153-4 SP - L4.1 EP - L4.4 PB - Allied Publishers Private Limited CY - Chennai AN - OPUS4-14753 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane T1 - Radar - Case studies of the application of radar for non-destructive testing of concrete structures T2 - Advanced Course on Non-Destructive Testing and Evaluation of Concrete Structures CY - Chennai, India DA - 2007-01-17 PY - 2007 SN - 81-8424-153-4 SP - L4.5 EP - L4.26 PB - Allied Publishers Private Limited CY - Chennai AN - OPUS4-14754 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiggenhauser, Herbert T1 - Need for Non-Destructive Testing and Evaluation of Concrete Structures T2 - Advanced Course on Non-Destructive Testing and Evaluation of Concrete Structures CY - Chennai, India DA - 2007-01-17 PY - 2007 SN - 81-8424-153-4 SP - L1.1 EP - L1.12 PB - Allied Publishers Private Limited CY - Chennai AN - OPUS4-14755 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiggenhauser, Herbert T1 - Advanced NDT methods and damage assessment in concrete structures - Part II T2 - Advanced Course on Non-Destructive Testing and Evaluation of Concrete Structures, CY - Chennai, India DA - 2007-01-17 PY - 2007 SN - 81-8424-153-4 SP - L5.1 EP - L5.20 PB - Allied Publishers Private Limited CY - Chennai AN - OPUS4-14756 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane ED - Jäger, W. T1 - Instandsetzung und Ertüchtigung von Mauerwerk - Teil 3: Zerstörungsfreie Prüfung zur Beurteilung von Mauerwerk N2 - Es wird ein Überblick über den Stand der Technik der Bauzustandsanalyse von historischem Mauerwerk mit zerstörungsfreien Prüfverfahren gegeben. Einzelne Prüfverfahren und ausgewählte Praxiseinsätze werden vorgestellt, um einen Einblick in die Vielfältigkeit der Anwendungsmethoden, aber auch in die Komplexität der möglichen Verfahrenskombinationen und der Datenauswertung und -interpretation zu geben. Aus Erfahrungen, die bei vielfältigen Messeinsätzen an historischen Gebäuden gewonnen wurden, lässt sich die Vorbereitung und Durchführung eines Messeinsatzes mit zerstörungsfreien, zerstörungsarmen und zum geringen Anteil mit zerstörenden Prüfverfahren unter bestimmten Voraussetzungen standardisieren. Obwohl einige Arbeitsschritte bei der Durchführung der Messungen und der Auswertung, Interpretation und Darstellung der Messergebnisse schon automatisiert wurden, ist für die Durchführung der Untersuchungen mit ZfPBau-Verfahren der Einsatz von geschultem Personal erforderlich. KW - Zerstörungsfreie Prüfung im Bauwesen KW - Historische Gebäude KW - Mauerwerk KW - Akustische Verfahren KW - Elektromagnetische Verfahren KW - Optische Verfahren KW - Merkblätter PY - 2007 UR - http://www.baufachinformation.de/aufsatz.jsp?ul=07069011571 SN - 978-3-433-01867-5 VL - 32 SP - 53 EP - 73 PB - Ernst CY - Berlin AN - OPUS4-14793 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühne, Hans-Carsten A1 - Maultzsch, Matthias A1 - Mellmann, Günter ED - Seiler, P. T1 - Einflüsse auf die Abreißfestigkeit von Betonuntergründen T2 - Industrieböden '07 CY - Ostfildern DA - 2007-01-16 PY - 2007 SN - 3-924813-68-X SN - 978-3-924813-68-0 VL - 2 SP - 713 EP - 718 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-14767 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molnarne, Maria T1 - Explosion protection by using the database CHEMSAFE T2 - AIChE 2007 - Spring National Meeting CY - Houston, Texas, USA DA - 2007-04-22 KW - CHEMSAFE KW - TRIANGLE Programm KW - Explosion KW - Dreistoffsysteme KW - Chemisch instabile Gase KW - Berechnungsmethode PY - 2007 SN - 978-0-816910-14-4 N1 - Serientitel: P / AIChE, American Institute of Chemical Engineers – Series title: P / AIChE, American Institute of Chemical Engineers IS - 237 SP - 465 EP - 474 PB - AIChE CY - New York AN - OPUS4-14807 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weltschev, Margit T1 - Prevention of damages by correct selection of materials T2 - 12th International Symposium on Loss Prevention and Safety Promotion in the Process Industries CY - Edinburgh, Scotland, UK DA - 2007-05-22 KW - Dangerous goods KW - Transport KW - Storage KW - Tanks KW - Resistance KW - Metallic materials KW - Polymeric materials PY - 2007 SN - 978-0-85295-508-6 SN - 0307-0492 N1 - Serientitel: IChemE symposium series – Series title: IChemE symposium series IS - 153 SP - 1 EP - 5 PB - IChemE CY - Rugby, Warwickshire AN - OPUS4-14857 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Drame, Christian A1 - Lohrer, Christian A1 - Arndt, Detlef A1 - Grätz, Rainer A1 - Förster, H. ED - Stolz, T. T1 - Untersuchung von Deflagrationen in geschlossenen Rohrleitungen T2 - 228. PTB-Seminar CY - Braunschweig, Deutschland DA - 2007-06-26 KW - Deflagration KW - Geschlossene Rohrleitung KW - Propan PY - 2007 SN - 978-3-86509-700-2 SP - 27 EP - 33 PB - Wirtschaftsverlag N. W. Verlag für neue Wissenschaft CY - Bremerhaven AN - OPUS4-14996 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Haid, August T1 - Explosive Stoffe PY - 1955 VL - 1 IS - Abschnitt 7/XIX SP - 1318 EP - 1323 PB - Ernst CY - Berlin ET - 28., neubearb. AN - OPUS4-15134 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rühl, Karl H. T1 - Formzahlen gekerbter Bauteile PY - 1955 VL - 1 IS - Abschnitt 6/VII SP - 960 EP - 964 PB - Ernst CY - Berlin ET - 28., neubearb. AN - OPUS4-15146 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schlosser, Franz T1 - Teer, Bitumen, bituminöse Baustoffe PY - 1955 VL - 1 IS - Abschnitt 7/XV SP - 1280 EP - 1287 PB - Ernst CY - Berlin ET - 28., neubearb. AN - OPUS4-15147 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hillebrand, K. T1 - Natürliche Steine und Erden PY - 1955 VL - 1 IS - Abschnitt 7/V SP - 1164 EP - 1175 PB - Ernst CY - Berlin ET - 28., neubearb. AN - OPUS4-15148 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mendrzyk, Hildegard T1 - Textilstoffe PY - 1955 VL - 1 IS - Abschnitt 7/XVI SP - 1287 EP - 1296 PB - Ernst CY - Berlin ET - 28., neubearb. AN - OPUS4-15149 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Richter, Manfred T1 - Optik PY - 1955 VL - 1 IS - Abschnitt 2/IV SP - 393 EP - 423 PB - Ernst CY - Berlin ET - 28., neubearb. AN - OPUS4-15150 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiederholt, Wilhelm A1 - Toeldte, W. T1 - Korrosion und Korrosionsschutz PY - 1955 VL - 1 IS - Abschnitt 7/I/C SP - 1039 EP - 1045 PB - Ernst CY - Berlin ET - 28., neubearb. AN - OPUS4-15151 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Toeldte, W. T1 - Anstrichmittel PY - 1955 VL - 1 IS - Abschnitt 7/XIII SP - 1273 EP - 1276 PB - Ernst CY - Berlin ET - 28., neubearb. AN - OPUS4-15152 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Umstätter, Hans T1 - Schmierstoffe PY - 1955 VL - 1 IS - Abschnitt 7/XII SP - 1267 EP - 1272 PB - Ernst CY - Berlin ET - 28., neubearb. AN - OPUS4-15153 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Werner, W. T1 - Kunststoffe und ihre Verarbeitung PY - 1955 VL - 1 IS - Abschnitt 7/XXI SP - 1340 EP - 1362 PB - Ernst CY - Berlin ET - 28., neubearb. AN - OPUS4-15154 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vaupel, Otto T1 - Zerstörungsfreie Werkstoffprüfung PY - 1955 VL - 1 IS - Abschnitt 6/X SP - 981 EP - 1001 PB - Ernst CY - Berlin ET - 28., neubearb. AN - OPUS4-15155 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schröder, Volkmar A1 - Pahl, Robert A1 - Michael-Schulz, Heike A1 - Wehrstedt, Klaus-Dieter ED - Stolz, T. T1 - Flammenausbreitung auf Flüssigkeitsoberflächen unterhalb des Flammpunktes - Explosionsschutz in Chemieanlagen T2 - 228. PTB-Seminar CY - Braunschweig, Deutschland DA - 2007-06-26 KW - Sicherheitstechnik KW - Flammpunkte KW - Explosionsgrenzen KW - Prozesssicherheit KW - Oxidationsverfahren PY - 2007 SN - 978-3-86509-700-2 SP - 17 EP - 26 PB - Wirtschaftsverlag N. W. Verlag für neue Wissenschaft CY - Bremerhaven AN - OPUS4-15017 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Burkert, Andreas A1 - Lehmann, Jens A1 - Burkert, Annette A1 - Mietz, Jürgen A1 - Eich, Gerd T1 - Verzinkte Bauteile im Kontakt mit Spanngliedern T2 - 4. Kolloquium des Kuratoriums Korrosionsschutz (KKF) CY - Düsseldorf, Deutschland DA - 2007-06-20 KW - Spannbeton KW - Spannstahl KW - Wasserstoffinduzierte Spannungsrisskorrosion KW - Verzinkte Einbauteile KW - Zink KW - DIN 1045 PY - 2007 SN - 978-3-935406-34-5 SP - 12 EP - 25 PB - GfKORR CY - Frankfurt am Main AN - OPUS4-15018 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bertram, R. A1 - Stephanowitz, H. A1 - Heinrich, Hans-Joachim A1 - Rost, H.-J. A1 - Lüdke, C. A1 - Hassler, J. ED - Möller, H. J. ED - Roewer, G. T1 - Spurenelementverteilung in Siliciumcarbid-Einkristallen - Vergleich analytischer Feststoffmethoden T2 - Freiberger Siliziumtage 2005 ; Freiberger Forschungsforum ; 56. Berg- und Hüttenmännischer Tag CY - Freiberg, Deutschland DA - 2005-06-15 KW - Einkristall KW - Siliciumcarbid KW - Halbleitereigenschaft KW - Leistungselektronik KW - Feststoffbestimmung KW - Chemische Analyse KW - Nachweisgrenze KW - Kristalldefekt KW - Spurenelement KW - Feststoffanalytik KW - ETV ICP OES KW - SS ET AAS KW - LA-ICP-MS KW - Elektrothermische Verdampfung KW - Laserablation PY - 2006 SN - 978-3-86012-295-2 SN - 0071-9420 N1 - Serientitel: Freiberger Forschungshefte / B – Series title: Freiberger Forschungshefte / B IS - 337 SP - 122 EP - 138 PB - Techn. Univ. Bergakad. CY - Freiberg AN - OPUS4-15834 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hässelbarth, Werner A1 - Bremser, Wolfram ED - Fajgelj, A. ED - Belli, M. ED - Sansone, U. T1 - Combination of results from several measurements - an everlasting problem KW - Messdatenauswertung KW - Kombination von Messergebnissen PY - 2007 SN - 978-0-85404-848-9 IS - Special Publication No. 307 SP - 34 EP - 61 PB - RSC CY - Cambridge, UK AN - OPUS4-15720 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lohrer, Christian A1 - Krause, Ulrich A1 - Steinbach, J. T1 - Self-Ignition of Combustible Bulk Materials under Various Ambient Conditions T2 - HAZARDS XVIII "Process safety - sharing best practice" CY - Manchester, England, UK DA - 2004-11-22 KW - Selbstentzündung KW - Sauerstoffanteil KW - Wasser KW - Modellierung PY - 2004 SN - 0-85295-460-3 SP - 12 pages CY - Manchester, England, UK AN - OPUS4-15695 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meyer-Plath, Asmus A1 - Mix, Renate A1 - Friedrich, Jörg Florian ED - Mittal, K. T1 - Aspects of amino functionalization of polypropylene surfaces for adhesion promotion of thermally-evaporated copper films KW - Plasma polymerization KW - Surface functionalization KW - Gas discharge KW - Grafting KW - Amino groups KW - Copper KW - Metallization KW - Adhesion PY - 2007 SN - 978-90-6764-455-6 SN - 90-6764-455-2 VL - 3 SP - 177 EP - 198 PB - VSP CY - Leiden AN - OPUS4-15733 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bäumer, A. A1 - Bork, Claus-Peter A1 - Emde, T. A1 - Evertz, T. A1 - Masendorf, R. A1 - May, U. A1 - Menne, M. A1 - Ratte, E. A1 - Steinbeck, G. T1 - Forschungsvorhaben P 603 - Ermittlung des Werkstoffverhaltens und des Beschichtungseinflusses durch rechnerische Methoden zur Verkürzung der Entwicklungszeiten im Fahrzeugbau mit Stahl KW - Stahlblech KW - Automobilindustrie KW - Crashverhalten KW - Fließkurven KW - Dehnungswöhlerlinien KW - Lebensdauerabschätzung PY - 2007 SN - 3-937567-48-8 SP - 122 Seiten PB - Verlag und Vertriebsgesellschaft mbH CY - Düsseldorf AN - OPUS4-15748 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schröder, Hartmut A1 - Munz, Martin A1 - Böhning, Martin T1 - A new method for testing and evaluating the long-tIme resistance to oxidation of polyolefinic products T2 - 13th International Plastics Additives and Compounding Conference "Addcon World 2007" CY - Frankfurt/M. DA - 2007-09-05 PY - 2007 SN - 978-1-84735-018-3 IS - Paper 7 SP - 1 EP - 10 CY - Shawbury AN - OPUS4-15762 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Kohl, Christoph A1 - Wöstmann, Jens A1 - Zacher, Gerhard T1 - Radar und Datenfusion T2 - Abschlusskolloquium DFG-Forschergruppe FOR 384 - Moderne ZfP bei der Bauwerkserhaltung CY - Bergisch Gladbach, Deutschland DA - 2007-05-03 KW - ZfPBau KW - Stahlbeton KW - Spannbetonbrücken KW - Bewehrung KW - Spannglieder KW - Radar KW - Ultraschall KW - Datenfusion PY - 2007 SN - 3-9808542-8-0 SP - 67 EP - 75 CY - Bergisch Gladbach AN - OPUS4-15989 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Zacher, Gerhard A1 - Kohl, Christoph A1 - Wöstmann, Jens ED - Christian U. Grosse, T1 - Radar and Fusion for Concrete Elements KW - NDT-CE KW - Concrete KW - Concrete bridge KW - Reinforcement bars KW - Radar KW - Ultrasonic KW - Data fusion PY - 2007 SN - 978-3-540-72447-6 SP - 631 EP - 638 PB - Springer CY - Heidelberg AN - OPUS4-15990 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ahrendt, H. A1 - Gesatzke, Roger A1 - Hahn, G. A1 - Herrmann, P. A1 - Julien, H. A1 - Karger, R. A1 - Kaufmann, M. A1 - Krebs, H.-J. A1 - Lucht, J. A1 - Müller, A. A1 - Müller, R. A1 - Vetter, B. T1 - Überdruckmessgeräte nach DIN EN 837 - Auswahl und Anwendung KW - Druckmessgerät KW - Sicherheit PY - 2007 SN - 978-3-410-16626-9 IS - 1. Auflage SP - 1 EP - 89 PB - Beuth CY - Berlin AN - OPUS4-15994 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, L.-M. A1 - Saaro, S. A1 - Woydt, Mathias ED - R. Suchentrunk, T1 - Reib-/Gleitverschleiß von thermisch gespritzten Hartmetallschichten KW - Thermisches Spritzen KW - Hartmetall KW - Cermet KW - Triboaktive Werkstoffe PY - 2007 SN - 978-3-87480-234-5 VL - 63 SP - 242 EP - 267 PB - Leuze CY - Bad Saulgau AN - OPUS4-15996 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rühl, Karl H. A1 - Schwaigerer, S. T1 - Grundlagen der Festigkeitslehre PY - 1955 VL - 1 IS - Abschnitt 6/II SP - 838 EP - 866 PB - Ernst CY - Berlin ET - 28., neubearb. AN - OPUS4-15979 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rühl, Karl H. T1 - Stabartige Tragwerke PY - 1955 VL - 1 IS - Abschnitt 6/III SP - 867 EP - 940 PB - Ernst CY - Berlin ET - 28., neubearb. AN - OPUS4-15980 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rühl, Karl H. T1 - Druckkräfte zwischen gewölbten Oberflächen PY - 1955 VL - 1 IS - Abschnitt 6/VIII SP - 964 EP - 967 PB - Ernst CY - Berlin ET - 28., neubearb. AN - OPUS4-15981 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sommer, Herbert ED - Stauch, A. ED - Sinner, G. T1 - Textile Rohstoffe und Erzeugnisse PY - 1937 IS - Abschnitt 4/IV/A a-d SP - 589 EP - 621 PB - Ernst CY - Berlin ET - 2., neu bearb. AN - OPUS4-15982 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Viertel, O. ED - Stauch, A. ED - Sinner, G. T1 - Textilfarben PY - 1937 IS - Abschnitt 4/IV/A e SP - 621 EP - 623 PB - Ernst CY - Berlin ET - 2., neu bearb. AN - OPUS4-15983 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Holzlöhner, Ulrich A1 - Schossig, Wolfgang A1 - Wuttke, Wilfried A1 - Ziegler, Fred ED - August, H. ED - Holzlöhner, U. ED - Meggyes, T. T1 - Langzeitverhalten von Erdstoffschichten in Deponiebasisabdichtungen, Feuchtehaushalt unter Temperatureinwirkung PY - 1998 SN - 3-540-63846-6 IS - 20 SP - 228 EP - 237 PB - Springer CY - Berlin AN - OPUS4-15984 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stamer, J. T1 - Nutzhölzer PY - 1931 VL - 1 IS - 6 SP - 876 EP - 888 CY - Berlin ET - 26., neubearb. AN - OPUS4-15971 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiederholt, Wilhelm ED - Stauch, A. ED - Rögnitz, H. T1 - Metallische Überzüge PY - 1957 VL - 1 IS - Abschnitt 1/V/A SP - 112 EP - 120 PB - Ernst CY - Berlin ET - 5., neu bearb. und erw. AN - OPUS4-15972 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfender, Max ED - Stauch, A. ED - Rögnitz, H. T1 - Warmpressen von Nichteisenmetallen im Gesenk PY - 1957 VL - 1 IS - Abschnitt 2/II/D SP - 189 EP - 192 PB - Ernst CY - Berlin ET - 5., neu bearb. und erw. AN - OPUS4-15973 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfender, Max ED - Stauch, A. ED - Rögnitz, H. T1 - Strangpressen PY - 1957 VL - 1 IS - Abschnitt 2/II/E SP - 193 EP - 195 PB - Ernst CY - Berlin ET - 5., neu bearb. und erw. AN - OPUS4-15974 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pfender, Max ED - Stauch, A. ED - Rögnitz, H. T1 - Kaltpressen von Metallen im Gesenk PY - 1957 VL - 1 IS - Abschnitt 2/II/F SP - 196 EP - 198 PB - Ernst CY - Berlin ET - 5., neu bearb. und erw. AN - OPUS4-15975 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiederholt, Wilhelm ED - Stauch, A. ED - Rögnitz, H. T1 - Email- und andere anorganische nichtmetallische Überzüge PY - 1957 VL - 1 IS - Abschnitt 1/V/B SP - 120 EP - 122 PB - Ernst CY - Berlin ET - 5., neu bearb. und erw. AN - OPUS4-15976 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiederholt, Wilhelm ED - Stauch, A. ED - Rögnitz, H. T1 - Anorganische, nichtmetallische Schichten durch chemische und elektrochemische Behandlung PY - 1957 VL - 1 IS - Abschnitt 1/V/C SP - 122 EP - 123 PB - Ernst CY - Berlin ET - 5., neu bearb. und erw. AN - OPUS4-15977 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Toeldte, W. T1 - Klebemittel PY - 1955 VL - 1 IS - Abschnitt 7/XIV SP - 1276 EP - 1279 PB - Ernst CY - Berlin ET - 28., neubearb. AN - OPUS4-15978 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kaminski, T. A1 - Trela, Christiane ED - Jan Bien, ED - Lennart Elfgren, ED - Jan Olofsson, T1 - Advanced methods of testing and analysis of old masonry bridge in Olesnica T2 - International Conference "Sustainable Bridges - Assessment for Future Traffic Demands and Longer Lives" CY - Wroclaw, Poland DA - 2007-10-10 PY - 2007 SN - 978-83-7125-161-0 SP - 461 EP - 472 PB - Dolnoslaskie Wydawnictwo Edukacyjne CY - Wroclaw, Poland AN - OPUS4-16121 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rabe, Torsten A1 - Eberstein, Markus A1 - Schiller, Wolfgang Arno ED - Kevin Ewsuk, ED - Kiyoshi Nogi, ED - Wäsche, Rolf ED - Yukichi Umakoshi, ED - Tom Hinklin, ED - Keizo Uematsu, ED - Tony Tomsia, ED - Hiroya Abe, ED - Hidehiro Kamiya, ED - Makio Naito, T1 - Low Temperature Co-Fired Ceramics (LTCC) - Design and Characterization of Interfaces T2 - 2nd International Conference on Characterization and Control of Interfaces for High Quality Advanced Materials, and Joining Technology for New Metallic Glasses and Inorganic Materials 2006 CY - Kurashiki, Japan DA - 2006-09-06 KW - Grenzflächenreaktionen KW - Keramische Multilayer KW - Sintern PY - 2007 SN - 978-0-470-18414-1 VL - 198 SP - 173 EP - 178 PB - John Wiley & Sons, Ltd. AN - OPUS4-16123 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Arndt, Ralf A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Walsdorf-Maul, Manuela T1 - Quantitative Phasen- und Amplitudenauswertung im Frequenzbereich für aktive Thermografie mit Rechteckimpuls-Erwärmung N2 - Nach einer Einführung in die Puls-Phasen-Thermografie (PPT) wird ein neuer Ansatz für die Defekttiefenbestimmung im Frequenzraum mittels der sogenannten charakteristischen Frequenz des minimalen Phasen- und Amplitudenkontrastes zwischen Fehlstelle und ungestörtem Bereich entwickelt und anhand von systematischen Untersuchungen an Probekörpern der Bundesanstalt für Materialforschung und -prüfung und ergänzenden Simulationsrechnungen überprüft. Die mit Rechteckimpuls-Spektral-Thermografie (RST) bezeichnete Methode, die auch als eine Rechteckimpuls-Thermografie (RIT) im Frequenzbereich oder eine durch Amplitudenauswertung ergänzte PPT für Rechteckimpulserwärmung verstanden werden kann, soll die existierenden Ansätze ergänzen und bietet eine Alternative für die Tiefenbestimmung von Defekten bei Messungen mit langen Erwärmungs- und Beobachtungszeiten, wie sie bei Anwendung von aktiver Thermografie im Bauwesen häufig vorkommen. T2 - Thermografie-Kolloquium 2007 CY - Stuttgart, Deutschland DA - 2007-09-27 KW - Puls-Phasen-Thermografie KW - Rechteckimpuls-Erwärmung KW - Zerstörungsfreie Prüfung im Bauwesen KW - Quantitative Methode PY - 2007 SN - 978-3-940283-03-0 IS - 107-CD SP - 52 EP - 60 AN - OPUS4-16128 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Röllig, Mathias A1 - Schultz, A. A1 - Vielhaber, J. ED - Jan Bien, ED - Lennart Elfgren, ED - Jan Olofsson, T1 - Quality assurance of CRFP-strengthened reinforced concrete structures using automated thermographic investigation KW - Quality assurance KW - Bridge repair and strengthening KW - Railway bridges KW - Non-destructive testing KW - Automated scanning PY - 2007 SN - 978-83-7125-161-0 SP - 321 EP - 330 PB - Dolnoslaskie Wydawnictwo Edukacyjne CY - Wroclaw, Poland AN - OPUS4-16091 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Bien, J. A1 - Cruz, P.J.S. ED - Jan Bien, ED - Lennart Elfgren, ED - Jan Olofsson, T1 - A guideline for railway bridge inspection and condition assessment including the NDT toolbox KW - Inspection procedure KW - Bridge condition assessment KW - Railway bridges KW - Non-destructive testing KW - NDT-toolbox PY - 2007 SN - 978-83-7125-161-0 SP - 93 EP - 104 PB - Dolnoslaskie Wydawnictwo Edukacyjne CY - Wroclaw, Poland AN - OPUS4-16092 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kammel, C. A1 - Helmerich, Rosemarie ED - Jan Bien, ED - Lennart Elfgren, ED - Jan Olofsson, T1 - Inspection of steel bridges KW - Inspection KW - Steel bridges KW - Zerstörungsfreie Prüfung KW - Engineering critical Assessment PY - 2007 SN - 978-83-7125-161-0 SP - 127 EP - 136 PB - Dolnoslaskie Wydawnictwo Edukacyjne CY - Wroclaw, Poland AN - OPUS4-16093 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Täljsten, B. A1 - Carolin, A. A1 - Helmerich, Rosemarie ED - Jan Bien, ED - Lennart Elfgren, ED - Jan Olofsson, T1 - Rehabilitation of railway bridges KW - Railway bridges KW - Repair and strengthening KW - CFRP-strengthening KW - Non-destructive testing PY - 2007 SN - 978-83-7125-161-0 SP - 303 EP - 312 PB - Dolnoslaskie Wydawnictwo Edukacyjne CY - Wroclaw, Poland AN - OPUS4-16094 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Olofsson, J. A1 - Elfgren, L. A1 - Bell, B. A1 - Paulsson, B. A1 - Niederleithinger, Ernst A1 - Jensen, J. A1 - Feltrin, G. A1 - Täljsten, B. A1 - Cremona, C. A1 - Kiviluoma, R. A1 - Bien, J. ED - Jan Bien, ED - Lennart Elfgren, ED - Jan Olofsson, T1 - Sustainable Bridges - A European Integrated Research Project. Background and overview KW - Brücken KW - Inspektion KW - Monitoring KW - Zerstörungsfreie Prüfung KW - Eisenbahn KW - Verstärkung KW - Reparatur PY - 2007 SN - 978-83-7125-161-0 SP - 29 EP - 49 PB - Dolnoslaskie Wydawnictwo Edukacyjne CY - Wroclaw, Poland AN - OPUS4-16181 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Völz, Uwe A1 - Schenk, Gottfried T1 - COMPAS-XL: Ein Ultraschall-Gruppenstrahlerprüfsystem der unbegrenzten Möglichkeiten? T2 - DGZfP-Seminar des FA Ultraschall (Moderne Systemtechnik bei Prüfungen mit Ultraschall) CY - Wuppertal, Deutschland DA - 2007-11-12 KW - COMPAS KW - COMPAS-XL KW - GRST KW - Gruppenstrahler KW - Gerätetechnik PY - 2007 SN - 978-3-940283-05-4 N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 109-CD SP - 1 EP - 8 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung CY - Berlin AN - OPUS4-16187 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Erning, Johann Wilhelm A1 - Zunkel, Astrid A1 - Klein, Ulrich T1 - Untersuchungen zu Prüfvorschriften zur Spannungsrisskorrosion an Messinglegierungen T2 - 33. VDI-Jahrestagung Schadensanalyse "Produktverbesserung durch Schadensanalyse" CY - Würzburg, Deutschland DA - 2007-09-27 PY - 2007 SN - 978-3-18-091985-0 SN - 0083-5560 IS - 1985 (CD-ROM) SP - 151 EP - 163 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-16197 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thiel, A. A1 - Eberstein, Markus A1 - Müller, Ralf A1 - Deubener, J. T1 - Viskosität von Glasmatrix-Kompositen mit partiell löslicher kristalliner Dispersphase T2 - 81. Glastechnische Tagung und 4. DGG-Symposium "Novel Optical Technologies" CY - Aachen, Deutschland DA - 2007-06-04 KW - Glasmatrixkomposite KW - Lösung KW - Sintern PY - 2007 SN - 978-3-921089-52-1 IS - CD-ROM SP - 1 EP - 8 PB - Deutsche Glastechnische Gesellschaft CY - Offenbach AN - OPUS4-16212 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brandes, Klaus A1 - Daum, Werner A1 - Buchhardt, Frank T1 - Monitoring of Bridges by Advanced Methods of Experimental - Mechanical Symbiosis T2 - International Association for Bridge and Structural Engineering (IABSE) Symposium 2007 CY - Weimar, Deutschland DA - 2007-09-19 KW - Long-term monitoring KW - Sensors KW - Experimental-analytical symbiosis KW - Bridges KW - Lagrangian Multipliers KW - Structural modelling PY - 2007 SN - 978-3-85748-116-1 VL - 93 SP - 1 EP - 8 CY - Weimar AN - OPUS4-16327 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - Scheer, M. ED - Bernd Henning, T1 - Strahlungsüberwachung mit Faser-Bragg-Gitter-Sensoren am Elektronenspeicherring BESSY II T2 - 21. Messtechnisches Symposium des Arbeitskreises der Hochschullehrer für Messtechnik e.V, CY - Paderborn, Deutschland DA - 2007-09-20 KW - Faser-Bragg-Gitter KW - Fasersensoren KW - Strahlungssensoren KW - Strahlungseffekte KW - Strahlungsdosimetrie KW - Elektronenspeicherring PY - 2007 SN - 978-3-8322-6539-7 SP - 178 EP - 189 PB - Shaker CY - Aachen AN - OPUS4-16314 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - von Oertzen, Alexander T1 - UN-default list discussion: Is the UN 2(C)(I)-Test appropriate for identifying potentially mass-explosive pyrotechnics? T2 - 10th International Symposium on Fireworks, CY - Montréal, Canada DA - 2007-10-15 KW - Feuerwerk KW - Pyrotechnische Sätze KW - Massenexplosion KW - UN-default-list PY - 2007 SN - 978-0-9734123-6-9 SP - 215 EP - 222 AN - OPUS4-16274 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - von Oertzen, Alexander T1 - Towards identifiying high-energetic pyrotechnic compositions KW - Feuerwerk KW - Pyrotechnische Sätze KW - Massenexplosion PY - 2007 SN - 978-0-9734123-6-9 SP - 223 EP - 235 AN - OPUS4-16275 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - von Oertzen, Alexander ED - Thomas Stolz, ED - Heino Bothe, T1 - EU-Projekt CHAF: Quantifizierung und Beherrschung der Gefahren beim Transport sowie bei der Massenlagerung von Feuerwerk KW - CHAF KW - Lagerung von Feuerwerk KW - Lagerunfälle PY - 2007 SN - 978-3-86509-700-2 SP - 102 EP - 109 PB - Wirtschaftsverl. NW, Verl. für Neue Wiss. CY - Braunschweig AN - OPUS4-16276 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Krause, Ulrich ED - Thomas Stolz, ED - Heino Bothe, T1 - Vorhersage von Brandszenarien bei der Lagerung von Schüttgütern KW - Selbstentzündung KW - Schüttgüter KW - Kohle KW - Biomasse KW - Numerische Simulation PY - 2007 SN - 978-3-86509-700-2 SP - 90 EP - 101 PB - Wirtschaftsverl. NW, Verl. für Neue Wiss. CY - Braunschweig AN - OPUS4-16277 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ritter, Martin A1 - Dziomba, T. A1 - Xu, M. A1 - Koenders, L. A1 - Kranzmann, Axel T1 - Eine neue 3D Kalibrierstrategie für Mikro- und Nanomessverfahren T2 - Tagung "Messtechnik für Mikro- und Nano-Engineering" CY - Erlangen, Deutschland DA - 29.11.2006 KW - 3D Kalibrierung KW - Rastermikroskopie KW - Nanomarker PY - 2006 SN - 3-18-091950-7 IS - 1950 SP - 15 EP - 24 AN - OPUS4-16359 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bahlmann, Stefanie A1 - Rübner, Katrin A1 - Meng, Birgit A1 - Hauer, B. A1 - Klein, H. A1 - Müller, C. A1 - Ruppert, J. A1 - Schäfer, S. A1 - Spanka, G. A1 - Wassing, W. A1 - Zunzer, U. T1 - Potenziale des Sekundärstoffeinsatzes im Betonbau - Teilprojekt B1 KW - Nachhaltigkeit KW - Sekundäre Gesteinskörnung KW - Rezyklierte Gesteinskörnung KW - Betonbrechsand KW - Müllverbrennungsasche PY - 2007 SN - 978-3-410-65772-9 SN - 0171-7197 N1 - Geburtsname von Bahlmann, Stefanie: Ramolla, S. - Birth name of Bahlmann, Stefanie: Ramolla, S. IS - 572 SP - 131 EP - 222 PB - Beuth AN - OPUS4-16361 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brandes, Klaus A1 - Daum, Werner A1 - Buchhardt, Frank ED - Paulo J.S. Cruz, ED - Dan M. Frangopol, ED - Luis C. Neves, T1 - Long-term monitoring of concrete bridges by direct combination of experimental and mechanical analysis T2 - 3. International Conference on Bridge Maintenance, Safety and Management "Bridge Maintenance, Safety, Management, Life-Cycle Performance and Cost", IABMAS `06 CY - Porto, Portugal DA - 2006-07-16 PY - 2006 SN - 978-0-415-40315-3 SP - 1 EP - 8 PB - Taylor & Francis CY - Leiden, The Netherlands AN - OPUS4-16395 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Banach, Ulrich A1 - Hübert, Thomas ED - Gerald Gerlach, ED - Peter Hauptmann, T1 - Sensorsysteme zum Aufspüren und Detektieren von Gefahren T2 - 8. Dresdner Sensor-Symposium CY - Dresden, Deutschland DA - 2007-12-10 KW - Multigassensoren KW - Elektronische Nase KW - Online-Sensorik PY - 2007 SN - 978-3-940046-45-1 N1 - Serientitel: Dresdner Beiträge zur Sensorik – Series title: Dresdner Beiträge zur Sensorik VL - 29 IS - 29 SP - 129 EP - 132 PB - TUDpress, Verlag der Wissenschaften GmbH CY - Dresden AN - OPUS4-16430 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lenke, Philipp A1 - Krebber, Katerina A1 - Muthig, M. A1 - Weigand, F. A1 - Thiele, E. ED - W. Ostachowicz, ED - J. Holnicki-Szulc, ED - C. Mota Soares, T1 - Distributed strain measurement using polymer optical fiber integrated in technical textile to detect displacement of soil N2 - Sensing characteristics of polymer optical fibers (POF) are studied using the optical time-domain reflectometry technique. For the first time to our knowledge, investigations are carried out with respect to integration of POF in technical textiles for distributed measurement of mechanical deformation. The research on this new sensor type focuses on its application in monitoring of geotechnical structures such as railway embankments, dikes, slopes and dams. We report on a distributed sensor system using POF integrated in technical textiles as sensing elements for measurement of displacement of soil. This sensor system is very robust – it withstands the integration under rough condition at a construction site – and can detect strain of more than 40 % over distances of more than 100 meters. T2 - 3. ECCOMAS Thematic Conference on Smart Structures and Materials CY - Gdansk, Poland DA - 2007-07-09 KW - OTDR KW - Strain sensor KW - Distributed sensing KW - Fiber optic sensor KW - POF sensor KW - Technical textile KW - Geotextile PY - 2007 SN - 978-83-88237-03-4 IS - Paper 03 SP - 1 EP - 8 PB - Institute of Fluid-Flow Machinery CY - Gda´nsk AN - OPUS4-16437 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hamann, Andreas A1 - Löwe, Peter A1 - Singh, K.N. ED - Pohl, M. T1 - Probleme der Werkstoffcharakterisierung bei hohen Dehnraten mittels servohydraulischer Prüftechnik T2 - Tagung "Werkstoffprüfung 2007 CY - Neu-Ulm, Deutschland DA - 2007-11-29 KW - Hochgeschwindigkeitszugversuch KW - Dehnrate KW - Belastungsgeschwindigkeit KW - Schädigung KW - Trägheit PY - 2007 SN - 978-3-514-00753-6 SP - 151 EP - 156 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-16376 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühl, Christiane T1 - Internationale Empfehlungen zur Pipelinesicherheit: UNECE Safety Guidelines / Good Practices for Pipelines KW - Rohrfernleitungen KW - Pipelines KW - Pipelinesicherheit KW - UNECE PY - 2007 SN - 978--3-8027-5326-8 VL - 31 SP - 543 EP - 553 PB - Vulkan CY - Essen AN - OPUS4-16377 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ewert, Uwe A1 - Zscherpel, Uwe A1 - Fratzscher, Daniel A1 - Alekseychuk, Oleksandr A1 - Einav, I. A1 - Infanzon, S. A1 - Zirnhelt, J. T1 - Optimization of Digital Industrial Radiography (DIR) Techniques for Specific Applications: An IAEA Coordinated Research Project T2 - 4. Conferencia Panamericana de END CY - Buenos Aires, Argentina DA - 2007-10-22 KW - Radiographie KW - Digitale Detektoren KW - Grenzen der Bildqualität KW - Preiswerte Prüftechnik PY - 2007 SN - 978-987-23957-0-4 IS - CD-ROM SP - 1 EP - 6 AN - OPUS4-16424 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ewert, Uwe A1 - Zscherpel, Uwe A1 - Bavendiek, K. T1 - Strategies for Film Replacement in Radiography - a comparative study T2 - 4. Conferencia Panamericana de END CY - Buenos Aires, Argentina DA - 2007-10-22 KW - Radiographie KW - Digitale Detektoren KW - Grenzen der Bildqualität KW - Vergleich Film KW - Speicherfolien KW - Detektor-Arrays PY - 2007 SN - 978-987-23957-0-4 IS - CD-ROM SP - 1 EP - 18 AN - OPUS4-16425 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wäsche, Rolf ED - Pohl, M. T1 - Schwingungsverschleißprüfung als Werkzeug für die Werkstoffentwicklung T2 - Tagung "Werkstoffprüfung 2007" CY - Neu-Ulm, Deutschland DA - 2007-11-29 KW - Verschleißfestigkeit KW - Werkstoffentwicklung KW - Keramik KW - Reibungsverhalten KW - Stahl PY - 2007 SN - 978-3-514-00753-6 SP - 299 EP - 304 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-16426 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Witt, Jens A1 - Schukar, Marcus A1 - Krebber, Katerina ED - Gerald Gerlach, ED - Peter Hauptmann, T1 - Polymeroptische Fasersensoren in der Medizintechnik T2 - 8. Dresdner Sensor-Symposium CY - Dresden, Deutschland DA - 2007-12-10 KW - OTDR KW - POF KW - Faseroptischer Sensor KW - Atmungssensor PY - 2007 SN - 978-3-940046-45-1 N1 - Serientitel: Dresdner Beiträge zur Sensorik – Series title: Dresdner Beiträge zur Sensorik VL - 29 IS - 29 SP - 223 EP - 226 PB - TUDpress, Verlag der Wissenschaften GmbH CY - Dresden AN - OPUS4-16427 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Banach, Ulrich A1 - Hübert, Thomas ED - Gerald Gerlach, ED - Peter Hauptmann, T1 - Detection of hydrogen with catalytic sensors T2 - 8. Dresdner Sensor-Symposium CY - Dresden, Deutschland DA - 2007-12-10 KW - Sensors KW - Hydrogen KW - Security KW - Calibration PY - 2007 SN - 978-3-940046-45-1 N1 - Serientitel: Dresdner Beiträge zur Sensorik – Series title: Dresdner Beiträge zur Sensorik VL - 29 IS - 29 SP - 133 EP - 136 PB - TUDpress, Verlag der Wissenschaften GmbH CY - Dresden AN - OPUS4-16429 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Manier, Charles-Alix A1 - Spaltmann, Dirk A1 - Woydt, Mathias ED - Christophe Donnet, ED - Erdemir, Ali T1 - Tribology of DLC Films Under Slip-Rolling Conditions KW - DLC coating KW - Diamond KW - Steel KW - Wear KW - Friction KW - Slip rolling KW - Lubrication PY - 2008 SN - 978-0-387-49891-1 SP - 383 EP - 409 PB - Springer Science + Business Media CY - New York AN - OPUS4-16495 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ullner, Christian T1 - Instrumentierte Eindringprüfung KW - Härteprüfung PY - 2007 SN - 978-3-8169-2550-7 SP - 167 EP - 236 PB - Expert Verlag CY - Renningen AN - OPUS4-16485 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN ED - Raupach, M. ED - Elsener, B. ED - Polder, R. ED - Mietz, Jürgen ED - M. Raupach, ED - Elsener, B. ED - R. Polder, ED - J. Mietz, T1 - Corrosion of reinforcement in concrete KW - Concrete KW - Corrosion KW - Reinforcement KW - Rehabilitation KW - Monitoring KW - Inhibitors PY - 2007 SN - 978-1-84569-210-0 SP - 1 EP - 312 PB - Woodhead Publishing Ltd CY - Cambridge, Great Britain AN - OPUS4-16588 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jann, Oliver ED - Czichos, Horst ED - Saito, T. ED - Smith, L. T1 - Emissions from Materials N2 - Emissions from materials influence the surrounding environment. Gaseous emissions - mainly volatile organic compounds (VOCs) - into indoor air are of Special interest due to the fact that they affect indoor air Quality (IAQ). VOCs are of importance because they are strongly related to the so-called sick-building Syndrome (SBS). Materials are not the only source of indoor air pollution. Other important sources are every type of combustion (e.g. fire places, gas cooking), especially smoking (environmental tobacco smoke (ETS)) and the use of household Chemicals (sprays, solvents e.g.). Whereas these kinds of sources can be influenced by the user (to use or not to use it) materials emissions cannot be influenced by the user to the same extent. Often the user is simply not aware that materials might have emissions. PY - 2011 SN - 978-3-642-16640-2 SP - 860 EP - 869 PB - Springer CY - Berlin, Heidelberg AN - OPUS4-24159 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Daum, Werner ED - Czichos, Horst ED - Saito, T. ED - Smith, L. T1 - Structural Health Monitoring - Embedded Sensors PY - 2011 SN - 978-3-642-16640-2 SP - 932 EP - 949 PB - Springer CY - Berlin, Heidelberg AN - OPUS4-24180 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bremser, Wolfram ED - Kromidas, S. T1 - Ermittlung und Angabe der Messunsicherheit N2 - Seit Erscheinen des „Guide to the Expression of Uncertainty in Measurement (GUM)“ [184] im Jahre 1993 (in redaktionell bearbeiteter Fassung 1995) ist das Konzept der Messunsicherheit in den unterschiedlichsten Bereichen des Mess und Prüfwesens angenommen und umgesetzt worden. Inzwischen gibt es ausführliche Leitfäden auch für wichtige Bereiche der analytischen Chemie (wie Umwelt- oder Lebensmittelanalytik), die auf die spezifischen Belange dieser Bereiche detailliert eingehen. Viele der im Anfangsstadium der Umsetzung des Konzeptes offenen Fragen wurden inzwischen gelöst, insbesondere sind eine Vielzahl von Anwendungsfällen bearbeitet und dokumentiert worden. Die vorangegangene Ausgabe dieses Buches enthielt einen Beitrag zum Schätzen der Messunsicherheit [224], in dem bereits die grundlegenden Aspekte und die Herangehensweise erörtert wurden. Obwohl der nachstehende Beitrag komplett aktualisiert und neu gestaltet wurde, um die Tendenzen der Entwicklung in den vergangenen zehn Jahren widerzuspiegeln, wird der Leser damals betrachtete Aspekte bestätigt sehen und einige der Grundgedanken wiederfinden. Die in diesem Kapitel verwendeten Begriffe und Definitionen in der Validierung, wie Präzision, Wiederholbarkeit, Reproduzierbarkeit, Richtigkeit oder Rückführbarkeit sowie die zugehörigen statistischen Konzepte werden in den Kapitel 3-11 dieses Buches ausführlich betrachtet, weshalb auf eine nochmalige Definition und Erläuterungen verzichtet wird. Der an weiterführenden Darstellungen interessierte Leser wird auf das Kompendium [185] verwiesen. Der in diesem Kapitel verwendete Begriff des Messverfahrens bezieht sich auf die Gesamtheit aller Prozeduren, die zur Erlangung eines Messwertes und einer dazugehörigen Unsicherheit für die vom zu untersuchenden Objekt gefragte Messgröße erforderlich sind. Dazu gehören die Probenahme, die mechanische und chemische Probenvorbereitung, z. B. mit den Schritten Trocknung, Mahlung, Siebung, Mischung (mechanisch) oder Extraktion (chemisch), alle Zwischenschritte wie z. B. zur Abtrennung die Messung behindernder (interferierender) Probenkomponenten („clean-up“), eine evtl. Transformation der Zielkomponente(n), wie z. B. eine Derivatisierung, der eigentliche instrumentelle Nachweis und die Bestimmung der in Rede stehenden Messgröße, die Kalibrierung des Nachweisinstruments inld. aller Schritte zur Erzeugung der Referenzpunkte (Kalibrierstandards) sowie die abschließende Datenauswertung zur Erzeugung des Messwertes und der dazugehörigen Unsicherheit. Nicht jedes Verfahren wird alle diese Teilschritte einschließen oder benötigt sie, so dass sich die Ermittlung der Messunsicherheit eines Verfahrens in einem Labor immer nur auf alle von dem jeweiligen analytischen Labor bearbeiteten Prozeduren (Teilmengen der obigen Auswahl) beziehen kann und wird. Der Begriff Messmethode hingegen bezieht sich (anders als in der angelsächsischen Literatur) i. d. R. allein auf das eigentliche (instrumenteile) Separationsund/oder Detektionsverfahren (wie ToF-IDMS, GC-FID, LC-MS/MS, HPLC-DAD, FT-IRu. a.). KW - Messunsicherheit KW - Messmodell KW - Quantifizierung KW - Methoden der Analytik PY - 2011 SN - 978-3-527-32938-0 SP - 579 EP - 614 PB - Wiley-VCH Verlag GmbH & Co. KGaA ET - 2. Auflage AN - OPUS4-24036 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ono, K. A1 - Erhard, Anton T1 - Nondestructive testing, 3. Ultrasonics N2 - The field of acoustics deals with sound Propagation in solids, liquids, and gases, whereby the frequencies may lie above or below the Audio band, that is, infrasound (<16 Hz) and ultrasound (>16 kHz), respectively. The speed of sound depends on mechanical properties of the material like elastic constants and compressibility. Interaction of imperfections such as grains, cracks, pores, and inclusions with sound waves results in reflection, refraction, scattering, and attenuation due to discontinuities in elastic moduli and density. By sending a pulse and receiving its reflection, the presence and Location of defects can be determined (pulse-echo technique). Ultrasound was applied in nondestructive testing (NDT) earlier than in medicine, but visualization of the data in a unicolor-scale image was first used in medical ultrasound diagnostics. The principle of ultrasonic testing, for example, the wave types that are suitable for different applications, the frequency ränge employed, reflectivity behavior, mode conversions, probe types, and so on are described in various publications, and a newer ultrasonic method, namely, the phased array technique, is treated in. KW - Ultrasonic waves KW - Piezocomposite materials for ultrasound generation KW - Phased array technique PY - 2011 SN - 978-3-52730-673-2 DO - https://doi.org/10.1002/14356007.o17_o02 SP - 1 EP - 17 PB - Wiley-VCH AN - OPUS4-24090 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schwenk, Christopher A1 - Tikhomirov, D. T1 - Standardisierung der numerischen Schweißsimulation N2 - Für die Abgrenzung der Anwendbarkeit verschiedener Methoden der numerischen Schweißsimulation sowie für die Vereinheitlichung der Voraussetzungen und der durchzuführenden Schritte bei der Simulation sind normative Regelwerke für den Anwender erforderlich. Da es derzeit noch keine normähnlichen Dokumente auf diesem Gebiet gibt, wurde vom DIN der Arbeitsausschuss NA 092-00-29-A "Schweißsimulation" gegründet, welcher sich mit der Erarbeitung der entsprechenden Dokumente befasst. Dieses Gremium wurde gemeinsam mit dem Gemeinschaftsausschuss FA 12 "Anwendungsnahe Schweißsimulation" der Forschungsvereinigung des DVS initiiert. Das Ziel der Normungsarbeit im Bereich der numerischen Schweißsimulation besteht in der Erarbeitung einer DIN SPEC, die die Vorgehensweisen bei der Simulation verschiedener Schweißphänomene und -verfahren langfristig standardisieren soll. In einem durch den genannten Arbeitsausschuss bereits vorbereiteten Entwurf der DIN SPEC 32534-1 wurde die Struktur des Hauptdokuments festgelegt. Im Hauptdokument sind die Anwendungsbereiche und die wesentlichen Begriffe der Schweißsimulation spezifiziert. Des Weiteren wurde die allgemein gültige Simulationsstruktur erarbeitet, welche als Empfehlung für den Auftraggeber und den Auftragnehmer bei der Formulierung und Abwicklung eines Dienstleistungsauftrages sowie für den Neueinstieg in die Schweißsimulation dienen soll. Den Schwerpunkt stellt die Vorstellung der neuen DIN SPEC mit der Erläuterung der wesentlichen Simulationsschritte dar. Im Weiteren wird auf die Klassifizierung der Unterdokumente in Abhängigkeit des Schweißverfahrens und des angestrebten Simulationsergebnisses eingegangen. Schließlich wird ein Ausblick auf die weiteren Themenfelder des Arbeitsausschusses NA 092-00-29-A "Schweißsimulation" sowie auf die internationalen Aktivitäten auf diesem Gebiet gegeben. T2 - DVS Congress 2011 - Große Schweißtechnische Tagung CY - Hamburg, Deutschland DA - 27.09.2011 PY - 2011 SN - 978-3-87155-267-0 VL - 275 SP - 21 EP - 26 PB - DVS Media GmbH CY - Düsseldorf AN - OPUS4-24558 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brehme, Sven A1 - Schartel, Bernhard A1 - Bykov, Y. A1 - Ciesielski, M. A1 - Döring, M. A1 - Fischer, O. A1 - Pospiech, D. A1 - Köppl, T. A1 - Altstädt, V. T1 - Flame retardancy mechanisms and performance of a halogen-free phosphorus polyester in PBT N2 - PET-P-DOPO is a phosphorus-containing polyester prepared from the glycol ether of the hydroquinone derivative of 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and dimethyl terephthalate. PET-P-DOPO and a blend of PBT with PET-PDOPO were investigated with respect to pyrolysis and fire behavior. PET-P-DOPO achieves a V-0 rating in the UL 94 test and exhibits a high LOI of 39.3%. The outstanding flame-retardant properties of PET-P-DOPO are the result of three different mechanisms (flame inhibition, charring and a protection effect of the intumescent char) that are active in PET-P-DOPO. The fire load and the peak of heat release rate (pHRR) are reduced to 34% and 17%, respectively. The char exhibits an intumescent multicellular structure enabling it to act as an efficient protection layer. As PET-P-DOPO is immiscible with PBT, the blend shows a lower breaking elongation than pure PBT. Compared to pure PET-P-DOPO, the flame retardancy of the blend is decreased according to the fraction of PET-P-DOPO used. Nevertheless, the flame-retardancy of PET-P-DOPO in the blend was good enough to compete with PBT flame-retarded by AlPi-Et (aluminum diethylphosphinate) that was used as a Benchmark. KW - PBT KW - DOPO KW - Flame retardancy PY - 2011 SN - 1-59623-795-3 SP - 1 EP - 15 CY - Wellesley, USA AN - OPUS4-24617 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tang, Z. A1 - Schempp, Philipp A1 - Seefeld, T. A1 - Schwenk, Christopher A1 - Vollertsen, F. T1 - Kornfeinung beim WIG- und Laserstrahlschweißen von Aluminiumlegierungen N2 - Die Kornfeinung beim Schweißen ist mit einem Übergang von groben, stängeligen Körnern zu kleineren, globulitischen Körnern im Schweißgut verbunden. Die Feinung der Korngröße und Form führt sowohl zu einer wesentlichen Verbesserung der Schweißeignung als auch zu verbesserten mechanischen Eigenschaften. Heute gebräuchliche Schweißzusatzwerkstoffe enthalten zum Teil bereits geringe Mengen kornfeinender Zusätze, deren Wirksamkeit jedoch von einer Reihe weiterer Randbedingungen abhängt. Durch Zugabe definierter Mengen an Keimbildnern (AlTi5B1) in das Schmelzbad wurde die Abhängigkeit der Korn-größe und –form vom Titan/Bor-Gehalt untersucht. Weiterhin wurde der zur vollständigen Kornfeinung notwendige Mindestgehalt an Keimbildner für unterschiedliche Legierungen und unter unterschiedlichen Schweißbedingungen, sowohl beim WIG-Schweißen als auch beim Laserstrahlschweißen bestimmt. Die Ergebnisse zeigen, dass sich die Korngröße im Schweißgut bis auf ein Minimum von ca. 20µm verringern lässt und zugleich der Anteil der globulitischen Körner zunimmt. Der Mindestgehalt an Keimbildner für vollständige Korn-feinung hängt stark von Schweißgeschwindigkeit und Legierungszusammensetzung ab. Der Einfluss der Kornfeinung auf die Festigkeit, Duktilität sowie die Heißrissempfindlichkeit der Schweißverbindungen wird an ausgewählten Bespielen aufgezeigt. T2 - DVS Congress 2011 - Große Schweißtechnische Tagung CY - Hamburg, Deutschland DA - 27.09.2011 KW - Kornfeinung KW - WIG-Schweißen KW - Laserstrahlschweißen KW - Aluminium PY - 2011 SN - 978-3-87155-267-0 VL - 275 SP - 153 EP - 160 PB - DVS Media GmbH CY - Düsseldorf AN - OPUS4-24607 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Liehr, Sascha ED - Mukhopadhyay, S.C. T1 - Polymer optical fiber sensors in structural health monitoring N2 - This chapter summarizes the recent development in the relatively new and emerging field of structural health monitoring using polymer optical fiber (POF) sensors, also referred to as plastic optical fiber sensors. The extraordinary mechanical properties of POF in terms of strainability and ruggedness allows for measurement applications that could not or only insufficiently be solved with existing techniques. A great number of measurement parameters relevant for structural health monitoring applications, such as strain, displacement, crack width, vibrations or moisture can be measured with POF sensors. Numerous sensing principles have been proposed during the last 20 years and the most promising techniques and developments for SHM will be introduced. The focus is on the measurement of physical quantities for early damage detection and propagation, structural surveillance and analysis of dynamic processes. PY - 2011 SN - 978-3-642-21098-3 DO - https://doi.org/10.1007/978-3-642-21099-0 SN - 1876-1100 N1 - Serientitel: Lecture Notes in Electrical Engineering – Series title: Lecture Notes in Electrical Engineering VL - 96 SP - 297 EP - 333 PB - Springer CY - Berlin, Heidelberg AN - OPUS4-24343 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Baytekin, H. Tarik A1 - Oran, Umut A1 - Theisen, J. A1 - Schmidt, Martin A1 - Unger, Wolfgang ED - Weckenmann, A. T1 - Validierte Messverfahren für die nichtgeometrische Größe Hydrophilie - Anwendung in der Mikrofluidik T2 - Abschlusskolloquium DFG Schwerpunktprogramm 1159 - Neue Strategien der Mess- und Prüftechnik für die Produktion von Mikrosystemen und Nanostrukturen CY - Erlangen, Deutschland DA - 2010-10-06 PY - 2011 SN - 978-3-8440-0358-1 SN - 0945-0769 SP - 163 EP - 172 PB - Shaker Verlag GmbH AN - OPUS4-24827 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Herffurth, T. A1 - Schröder, S. A1 - Tan, Ö. A1 - Apel, S. A1 - Senoner, Mathias A1 - Sahre, Mario ED - Weckenmann, A. T1 - Rauheitsbewertung beschichteter Oberflächen T2 - Abschlusskolloquium DFG Schwerpunktprogramm 1159 - Neue Strategien der Mess- und Prüftechnik für die Produktion von Mikrosystemen und Nanostrukturen CY - Erlangen, Germany DA - 2010-10-06 KW - AFM-Spitzencharakterisierer KW - Nanotopographie KW - Rasterkraftmikroskopie KW - Rauheit KW - Weißlichtinterferometrie PY - 2011 SN - 978-3-8440-0358-1 SN - 0945-0769 SP - 219 EP - 231 PB - Shaker Verlag GmbH AN - OPUS4-24789 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Senoner, Mathias A1 - Sahre, Mario A1 - Rooch, Heidemarie A1 - Unger, Wolfgang ED - Weckenmann, A. T1 - Neuartige, räumlich strukturierte Testproben für die Bestimmung der Abbildungsqualität und die Kalibrierung der Längenskala in der Rastersondenmikroskopie T2 - Abschlusskolloquium DFG Schwerpunktprogramm 1159 - Neue Strategien der Mess- und Prüftechnik für die Produktion von Mikrosystemen und Nanostrukturen CY - Erlangen, Germany DA - 2010-10-06 KW - MOVPE KW - Rasterkraftmikroskopie KW - Referenzmaterial KW - Schichtstapel KW - Selektives Ätzen KW - Spitzencharakterisierer KW - TEM PY - 2011 SN - 978-3-8440-0358-1 SN - 0945-0769 SP - 116 EP - 129 PB - Shaker Verlag GmbH AN - OPUS4-24790 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Zimmermann, J. A1 - Sawodny, O. A1 - Lyda, W. A1 - Burla, A. A1 - Osten, W. A1 - Eigenbrod, H. A1 - Westkämper, E. A1 - Shaw, L. A1 - Weckenmann, A. A1 - Herffurth, T. A1 - Duparré, A. A1 - Tünnermann, A. A1 - Staude, Andreas A1 - Goebbels, Jürgen ED - Weckenmann, A. T1 - Registrierung multimodaler Messungen am Beispiel eines MEMS N2 - Die Produktion von elektronischen, optischen und elektro-mechanischen Mikro- und Nanosystemen stellt hohe Anforderungen an die Messtechnik, um die Fertigungsprozesse zu optimieren und die Qualität zu prüfen. Existierende Messverfahren unterliegen Beschränkungen hinsichtlich des Auflösungsvermögens, der Messfeldgröße und des Ergebnisses der Messung. Der kombinierte Einsatz von Sensoren mit unterschiedlichen Fähigkeiten in den Auflösungsstufen mittels einer intelligenten Messstrategie ermöglicht eine effiziente Prüfung. Neben den geeigneten Prüfstrategien werden auch Methoden zur Fusion und Auswertung der Daten von Sensoren mit unterschiedlichen Auflösungsfähigkeiten benötigt. Datenfusion bezeichnet dabei das Zusammenfügen verschiedener Messungen, um entweder unterschiedliche Eigenschaften eines Messobjekts in einem gemeinsamen Koordinatensystem angeben zu können oder um aus verschiedenen Messungen derselben Eigenschaft des Messobjekts einen Datensatz von höherer Qualität gegenüber den einzelnen Datensätzen zu erhalten. Voraussetzung für die Datenfusion ist Registrierung, die eine Überführung von Messdaten unterschiedlicher Messfelder oder Messmittel in ein gemeinsames Koordinatensystem darstellt und Thema dieses Beitrages ist. T2 - Abschlusskolloquium DFG Schwerpunktprogramm 1159 - Neue Strategien der Mess- und Prüftechnik für die Produktion von Mikrosystemen und Nanostrukturen CY - Erlangen, Deutschland DA - 06.11.2010 PY - 2011 SN - 978-3-8440-0358-1 SN - 0945-0769 SP - 173 EP - 187 PB - Shaker Verlag GmbH AN - OPUS4-24876 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neuschaefer-Rube, U. A1 - Becke, C. A1 - Sadowski, E. A1 - Tan, Ö. A1 - Staude, Andreas A1 - Zimmermann, J. ED - Weckenmann, A. T1 - Virtuelle Messgeräte und Simulationen im Mikrobereich - Potential und Grenzen T2 - Abschlusskolloquium DFG Schwerpunktprogramm 1159 - Neue Strategien der Mess- und Prüftechnik für die Produktion von Mikrosystemen und Nanostrukturen CY - Erlangen, Deutschland DA - 2010-10-06 PY - 2011 SN - 978-3-8440-0358-1 SN - 0945-0769 SP - 206 EP - 218 PB - Shaker Verlag GmbH AN - OPUS4-24877 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Sebastian A1 - Reeb, P. A1 - Schlothmann, B.-J. T1 - Referenzmaterialien in der Eisen- und Stahlindustrie N2 - Die regelmäßige und korrekte Verwendung von Referenzmaterialien (RM) und zertifizierten Referenzmaterialien (ZRM) und die damit gewährleistete Rückführung der Messergebnisse auf anerkannte Bezugsgrößen (Standards) setzt sich, nicht zuletzt durch die Anforderungen der ISO/IEC 17025, zunehmend durch. Die Zuverlässigkeit und Richtigkeit von Messergebnissen hängt wesentlich von der Verfügbarkeit von Referenzmaterialien ab. Zertifiziertes Referenzmaterial (ZRM) ist damit für die Analytik ein unentbehrliches Hilfsmittel geworden. PY - 2011 SN - 978-3-514-00788-8 SP - 98 EP - 112 PB - Stahlbau-Verl. CY - Düsseldorf AN - OPUS4-25148 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Blind, K. A1 - Mangelsdorf, Axel ED - Stober, R. T1 - Standards zur Qualitätssicherung (Art. 26 V DL-RL) aus ökonomischer Perspektive N2 - Aufgrund der Immaterialität von Dienstleistungen ist es dem Nachfrager von Dienstleistungen nur schwer möglich, vor dem Konsum die Qualität einer Dienstleistung einzuschätzen. Dementsprechend fehlt es oft an Vertrauen zwischen den Anbietern von Dienstleistungen und den Nachfragern. Das fehlende Vertrauen der Dienstleistungsnachfrager oder - anderes gesagt - die Informationsasymmetrien zwischen Käufer und Verkäufer erhöhen die Transaktionskosten und lassen einen Vertragsabschluss weniger wahrscheinlich werden. Das fehlende Vertrauen der Nachfrager in die Qualität von Dienstleistungen berührt nicht nur den inländischen Handel, sondern beeinträchtigt gerade den internationalen und damit auch den innereuropäischen Handel mit Dienstleistungen. Eine Eurobarometerumfrage aus dem Jahr 2002 zeigt, dass 26% der befragten europäischen Verbraucher einem Anbieter aus einem EU-Land außer ihrem eigenen weniger vertrauen als einem nationalen Anbieter. Aus dieser Umfrage ging ebenfalls hervor, dass die Verbraucher das Sicherheitsniveau von ausländischen Produkten und Dienstleistungen als geringer empfinden als Angebote aus ihrem eigenen Land. Das mangelnde Vertrauen der Nachfrager in ausländische Dienstleistungsanbieter ist auf die fehlende Transparenz der Dienstleistungsqualität und den damit implizierten Informationsasymmetrien zurückzuführen. Die im Dienstleistungssektor vorhandenen Informationsasymmetrien verursachen beachtliche volkswirtschaftliche Kosten bzw. Ineffizienzen, die im Vergleich zu den Produktmärkten ausgeprägter sind, da Produkteigenschaften im Gegensatz zu Eigenschaften von Dienstleistungscharakteristika auch für den Endverbraucher vor dem Kauf leichter zugänglich und auch besser nachprüfbar sind. KW - Food standards KW - Trade barriers KW - SPS KW - TBT KW - Harmonization PY - 2011 SN - 978-3-452-27634-6 SP - 73 EP - 103 PB - Carl Heymanns AN - OPUS4-25502 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Torge, Manfred A1 - Adam, Karin A1 - Feldmann, Ines T1 - Naturwissenschaftliche Untersuchungen an Glasproben aus Mühlhausen N2 - Die Bestimmung der chemischen Zusammensetzung von Glasproben, insbesondere von historischen Glasmalereien, gehört seit mehr als 20 Jahren zu den Standardverfahren in der Arbeitsgruppe 4.21 »Umwelteinflüsse und Schädigungsmechanismen« der BAM. Während in den 1990er Jahren eine Elektronenstrahlmikrosonde für diese Analysen zur Verfügung stand, werden seit etwa zehn Jahren solche Untersuchungen mit einem Environmental Scanning Electron Microscope (ESEM) durchgeführt. KW - Glasmalerei KW - Glasanalysen KW - EDX PY - 2011 SN - 978-3-937940-77-9 N1 - Serientitel: Arbeitshefte des Thüringischen Landesamtes für Denkmalpflege und Archäologie – Series title: Arbeitshefte des Thüringischen Landesamtes für Denkmalpflege und Archäologie VL - 38 SP - 96 EP - 97 PB - Sandstein CY - Dresden AN - OPUS4-25483 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bremser, Wolfram ED - Pavese, F. ED - Bär, M. ED - Filtz, J.-R. ED - Forbes, A.B. ED - Pendrill, L. ED - Shirono, K. T1 - Self-consistent reference value estimation N2 - Much has been published over the last years on finding the best (consensus) reference value (RV) for a given set of laboratory data attained in inter- or key comparisons (the latter with a specific view to the CIPM MRA). However, the discussion is ongoing. Except cases where real reference values are available from other sources, the quality of the (consensus value is of major importance in proficiency testing, method Validation, or reference material certification. A distribution-free, self-consistent RV estimation approach has been developed which is based on the single criterion of participant's compatibility, at the cost of adjusted uncertainties. The final result is a fully compatible data set with minimum Overall variance, and adjusted uncertainties for those values reported which had to be made compatible with the (key comparison) reference value. Any outlier discussion becomes obsolete, including considerations concerning different degrees of robustness of the various location and .dispersion estimators available. The penalty for "badly" performing laboratories is a large attributed uncertainty which forces them to either improve the measurement or adjust (i.e. reduce) their performance Claims. The evaluation algorithm is described. An example from a CCQM comparison is given, and consequences for the performance Claims of the participants discussed. KW - Location parameter KW - Dispersion parameter KW - Reference value KW - Key comparison PY - 2012 SN - 978-981-4397-94-0 N1 - Serientitel: Series on advances in mathematics for applied sciences – Series title: Series on advances in mathematics for applied sciences VL - 84 SP - 58 EP - 65 PB - World Scientific Publ. AN - OPUS4-25926 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Progris, R. A1 - Robbe-Valloire, F. A1 - Richard, J. A1 - Aye, J. A1 - Woydt, Mathias T1 - Biolubrifiants PY - 2013 SN - 978-2-85059-309-3 N1 - Serientitel: Techniques de l'ingénieur – Series title: Techniques de l'ingénieur SP - 139 EP - 152 PB - Editons TI CY - Paris AN - OPUS4-25589 LA - fra AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pelkner, Matthias A1 - Neubauer, Andreas A1 - Blome, Mark A1 - Reimund, Verena A1 - Thomas, Hans-Martin A1 - Kreutzbruck, Marc ED - Chady, T. ED - Gratkowski, S. ED - Takagi, T. ED - Udpa, S.S. T1 - Flux leakage measurements for defect characterization using NDT adapted GMR sensors N2 - High-precision magnetic field sensors are of increasing interest in non destructive testing (NDT). In particular GMR-sensors (giant magneto resistance) are qualified because of their high sensitivity, high signal-to-noise ratio and high spatial resolution. We performed magnetic flux leakage measurements of artificial cracks with a GMR-gradiometer and a 3-axes GMR-magnetometer. Cracks of a depth of 44 μm still could be detected with a sufficient high signal-to-noise ratio. A semi-analytic magnetic dipole model was used for swiftly predicting magnetic stray fields. The reliable reconstruction based on measurements of artificial rectangular-shaped defects is demonstrated. KW - GMR KW - NDT KW - Magnetic flux leakage KW - Reconstruction PY - 2011 SN - 978-1-60750-749-9 SN - 1383-7281 N1 - Serientitel: Studies in applied electromagnetics and mechanics – Series title: Studies in applied electromagnetics and mechanics VL - 35 SP - 217 EP - 224 PB - IOS Press CY - Amsterdam, The Netherlands AN - OPUS4-25374 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiederholt, Wilhelm ED - Steudel, H. T1 - Korrosionsprüfung PY - 1960 IS - II E7 SP - 1 EP - 14 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-25048 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Miccoli, Lorenzo ED - Carughi, U. T1 - Cina KW - Erhaltung des kulturellen Erbes KW - Historische Gebäude PY - 2013 SN - 978-88-422-2196-8 SP - 382 EP - 385 AN - OPUS4-27698 LA - ita AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Erning, Johann Wilhelm A1 - Sailer, M. A1 - Pescatore, C. A1 - Boissier, F. A1 - Kessler, J. A1 - Kotra, J. A1 - Löw, S. A1 - Mayor, J.C. A1 - Stroes-Gascoyne, S. A1 - Tokunaga, T. A1 - Compton, K. T1 - The post-closure radiological safety case for a spent fuel repository in Sweden KW - Final repository KW - Safety KW - Copper corrosion PY - 2012 SN - 978-92-64-99191-0 VL - 7084 SP - 1 EP - 153 AN - OPUS4-26644 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ciscato, W. A1 - Binder, Christian A1 - Hesse, Olaf A1 - Lehné, Siegfried A1 - Kasch, Thomas ED - Davis, S.E. ED - Steinberg, T.A. T1 - Another dangerous practice in the SCUBA diving community N2 - The widely held incorrect belief in the self-contained underwater breathing apparatus (SCUBA) diving community, that oxygen-enriched gas mixtures, so-called NITROX, with an oxygen content of up to 40 vol. % can be considered as regular air, has already been refuted in many papers. Now, another dangerous practice has drawn the attention. In a market study, more than 60 representative SCUBA cylinder valves were examined. Sales offices claim that all of those valves can be used for oxygen-enriched gas mixtures. The fact is that some of these cylinder valves are for air use only. By exchanging the nonmetallic materials and applying additional cleaning procedures, these air valves become so-called “oxygen clean.” Then, the valves are on sale for oxygen-enriched service. This procedure is dangerous because the labeling pretends a pseudo-safety. All of the 60 SCUBA cylinder valves were tested applying the standardized oxygen pressure surge tester at BAM. As suspected, many of the cylinder valves are not burn-out safe. In addition, different test results were received for actual new valves, for so-called new but temporarily stored valves, and for used valves. This paper reveals another dangerous practice and wants to alert the SCUBA diving community. KW - SCUBA diving KW - Pneumatic impact KW - Burn-out safety KW - Oxygen KW - NITROX KW - Modified air valves KW - Aging of diving valves KW - Oxygen compatibility PY - 2012 SN - 978-0-8031-7547-1 DO - https://doi.org/10.1520/STP20120007 VL - 13 IS - STP 1561 SP - 162 EP - 171 CY - West Conshohocken, PA, USA AN - OPUS4-27136 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pieper, R. A1 - Schalau, Bernd ED - Pieper, R. ED - Lang, K.-H. T1 - Methodische Ansätze zur Ableitung von Prüfpflichten für Arbeitsmittel N2 - Der nachfolgende Beitrag geht auf einen Vortrag zurück, der am 10.01.2012 im Rahmen des 77. Sicherheitswissenschaftlichen Kolloquiums gehalten worden ist Dieser Vortrag wie auch der nachfolgende Beitrag beruhen auf den Arbeiten einer vom Ausschuss für Betriebssicherheit (ABS) berufenen Projektgruppe, die ihre Ergebnisse am 10.12.2012 im Rahmen der 22. Sitzung des ABS abschließend vorgestellt hat. Die Projektgruppe hatte den Auftrag, für den ABS eine Methodik zu entwickeln, mit deren Hilfe das Erfordernis von besonderen Prüfungen für Arbeitsmittel i.S. der Betriebssicherheitsverordnung (BetrSichV) ermittelt werden kann. T2 - 77. Sicherheitswissenschaftliches Kolloquium CY - Wuppertal, Germany DA - 10.01.2012 PY - 2013 SN - 978-3-936841-25-1 N1 - Serientitel: Schriftenreihe des Instituts für Arbeitsmedizin, Sicherheitstechnik und Ergonomie e.V. (ASER) – Series title: Schriftenreihe des Instituts für Arbeitsmedizin, Sicherheitstechnik und Ergonomie e.V. (ASER) VL - 8 IS - Forschungsbericht - Nr. 28 SP - 74 EP - 84 PB - Institut ASER e.V. CY - Wuppertal AN - OPUS4-28887 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Holm, Olaf T1 - Aufschluss, Trennung und Rückgewinnung von Metallen aus Rückständen thermischer Prozesse - Verdoppelung der Metallausbeute aus MVA-Rostasche N2 - In den Rückständen thermischer Verfahren sind bedingt durch den Verbrennungsprozess Metalle sowohl in elementarer wie auch in chemisch gebundener Form enthalten. Früher wurde Eisenschrott vor allem deshalb mit Magneten abgetrennt, weil sonst die Verwertung als Baustoff erschwert war. Nichteisen-Metalle, bei Rostasche aus einer Müllverbrennungsanlage (MVA) sind dies hauptsächlich Kupfer und Aluminium, können mit der Wirbelstromtechnik abgetrennt werden. Auf diese Weise sinken auch die Gehalte an umweltrelevanten Schwermetallen. Allerdings werden die kleinen Korngrößen und die chemische gebundenen Metallen (z.B. Oxide oder Carbonate) bisher in der Aufbereitung nicht erfasst. Der Beitrag befasst sich mit den verfahrenstechnischen Potenzialen zur Erhöhung der Metallausbeute. KW - Rostasche KW - Aufbereitung KW - Flotation KW - Dichtesortierung KW - Nichteisenmetalle PY - 2013 SN - 978-3-935317-99-3 SP - 297 EP - 310 PB - TK-Verl. AN - OPUS4-29168 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Glombitza, F. A1 - Berger, Wolfgang A1 - Kothe, E. A1 - Ondruschka, J. A1 - Pinka, J. A1 - Schippers, A. A1 - Willscher, S. A1 - Zehnsdorf, A. A1 - Brandl, H. ED - Schlömann, M. ED - Schippers, A. T1 - Rückstände aus Industrie und Umwelt - Aufbereitung mittels Geobiotechnologie? N2 - Um den Bedarf der Wirtschaft an Rohstoffen und Energie zu decken, werden ständig neue Rohstofflagerstätten erschlossen. Zusätzlich bemüht man sich darum, zumindest einen Teil der Rohstoffe wieder zu verwerten (Recycling). Der Erfolg hängt erheblich davon ab, wie gut es gelingt, die verschiedenen Stoffe voneinander zu trennen; diese Trennprozesse sind gegenwärtig immer noch unvollkommen. Dadurch fallen beim Recycling Reststoffe an, die noch erhebliche Mengen an Wertstoffen aufweisen. Besonders die Rückstände aus älteren Gewinnungstechnologien enthalten aus heutiger Sicht Konzentrationen, die zum Teil höher als in abbauwürdigen Erzen sind. Des-halb sieht die OECD die Erhöhung der Effizienz bei der Ressourcennutzung als eine der dringendsten Herausforderungen PY - 2013 SP - 23 EP - 28 AN - OPUS4-27948 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krug, Sonja A1 - Simon, S. ED - Brückle, I. ED - Hahn, O. ED - Bredekamp, H. T1 - Digital image analysis N2 - Comparatiye digital analysis was performed on the five moon drawings from the New York copy of the Sidereus Nuncius and the copperplate etchings printed in the Graz and Florence copies. The sequences of figures for the drawings on pages 8r, 9v and lOv demonstrate the process of digitally enhancing the black material on the drawings, isolating that material and then overlaying it on the etchings. Using an image editing program (Image Pro® Plus by Media Cybernetics) the black material on the drawings and the letterpress-printed text were isolated and segmented from the brown drawing media. As shown in Figs. 4, 6 and 8, the isolation was possible and the black material clearly overlaps the demarcation line in the drawings. To compare the drawn and printed images of each moon, the images were laid on top of each other with Adobe Photoshop® (Adobe Systems). In these images, the printed text was used for alignment and scale. By decreasing the opacity of the image on top, the lines of each image were compared. This technique revealed an almost one-to-one correlation between the demarcation line in the drawing (as indicated by the black material) and that on the etching. In each case, the similarities and concurrences by far outnumbered the minor deviations in line. One precondition of this work was that all the photographs be at the same angle, plane-parallel, so that the drawings could be compared with the etchings. A slight aberration in the plane could distort the geometry of the illustrations. Rectification of the image plane was carried out by means of the program metigo® MAP 2.2 (Fokus GmbH Leipzig). To validate the method, photographs from the same detail of the New York copy taken with different photographic cameras and different Parameters were rectified with metigo® MAP and compared in Adobe Photoshop®. The overlay of these photographs shows a good correlation in the layout of the lettering and moon figures with only small aberrations. The distribution of the black material on the drawings can be followed as clearly in the rectified photographs as in the unrectified photographs, the information is the same. PY - 2011 SN - 978-3-05-005095-9 SP - 94 EP - 97 PB - Akademie Verlag GmbH CY - Berlin AN - OPUS4-27538 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Götschel, S. A1 - Weiser, M. A1 - Maierhofer, Christiane A1 - Richter, Regina A1 - Röllig, Mathias ED - Büyüköztürk, O. ED - Tasdemir, M.A. ED - Günes, O. ED - Akkaya, Y. T1 - Fast defect shape reconstruction based on the travel time in pulse thermography N2 - Pulse thermography is a non-destructive testing method based on ­infrared imaging of transient thermal patterns. Heating the surface of the structure under test for a short period of time generates a non-stationary temperature distribution and thus a thermal contrast between the defect and the sound material. In modern NDT, a quantitative characterization of hidden imperfections in materials is desired. In particular, defect depth and shape are of interest. The reconstruction of the defect from thermography data is a nonlinear inverse problem, and ill-posed. We propose an algorithm for the identification of subsurface defects based on the travel time of the reflected thermal pulse. Our work extends results by Lugin and Netzelmann, taking lateral thermal flows directly into account while retrieving the defect depth. This requires significantly less computational work. Quantitative information about the defect shape and depth is obtained. Application of our method to both thermography data generated by a finite element simulation and experimental heating of PVC test specimens with different defects yields good reconstruction of the actual defects. KW - Defect shape reconstruction KW - Finite element simulation KW - Pulsed thermography KW - Quantitative characterization KW - Thermal contrast KW - Inversion KW - Aktive Thermografie KW - Wanddicke KW - Rückwand KW - Minderdicken KW - Schichtdicken KW - Thermische Welle PY - 2013 SN - 978-94-007-0722-1 DO - https://doi.org/10.1007/978-94-007-0723-8_11 SN - 2211-0844 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 6 SP - 83 EP - 89 PB - Springer AN - OPUS4-27619 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias T1 - Tribologie des céramiques N2 - Les ceramiques modernes sont differentes des ceramiques traditionnelles (carrelage, materiaux de construction, porcelaine); on les distingue par des adjectifs tels que « techniques », « industrielles » ou « thermomecaniques ». Les ceramiques industrielles sont caracterisees par leur caractere refractaire marque et de grandes duretes. Leur mediocre tenacite explique leur sensibilite ä la presence de defauts, d'oü leur reputation d'etre peu resistantes et cassantes. Les ceramiques techniques sont utilisees pour: • leurs proprietes electriques ou dielectriques; • leurs proprietes magnetiques et de supraconducteurs ; • leurs proprietes optiques; • leurs proprietes chimiques; • leurs proprietes biologiques; • leurs proprietes nucleaires. En outre, eiles sont employees pour leurs proprietes mecaniques, thermomecaniques et tribologiques, ainsi que pour leur tenue face ä la corrosion. Nous allons nous concentrer sur leur comportement tribologique. PY - 2013 N1 - Serientitel: Les sélections - Techniques de l'ingénieur – Series title: Les sélections - Techniques de l'ingénieur SP - TRI 4 550-1 EP - TRI 4 550-14 CY - Paris AN - OPUS4-28146 LA - fra AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Meggyes, T. ED - Meyers, R.A. T1 - Sustainable remediation methods for metals and radionuclides N2 - Glossary Biomineralization A process by which living organisms produce minerals. - Chernobyl Ukrainian city site of the largest nuclear power plant accident in history. - Cut-off-wall Underground structure designed to prevent the flow of water. - DART Deep aquifer remediation tool. - Diffusion Movement of ions and molecules from places of higher concentration to places of lower concentration. - Electrochemical remediation Remediation technologies comprising electrochemical transport and transformation methods. - Electrokinetic screens Structures used to prevent radionuclides from diffusing from the polluted area into the environment. - Electromigration Transport of charged ions or ion complexes in solution. - Electroosmosis Movement of liquid relative to a charged stationary surface, - Electrophoresis Movement of charged particles relative to a stationary fluid. - Enhanced electrochemical remediation Use of pH control and additives to improve removal efficiency. - EURT East Urals Radioactive Trail area contaminated due to a nuclear accident. - Natural attenuation (NA) Remediation relying entirely on natural processes. - Permeable reactive barriers Passive in situ treatment zones of reactive material that degrades or immobilizes contaminants as groundwater flows through it. - Phytoremediation Soil remediation using living plants and their associated microorganisms. - Radionuclide or radioisotope An atom with an unstable nucleus whose excess energy is available to be imparted to a newly-created radiation particle within the nucleus or to an atomic electron. - Total material requirement (TMR) Sum of domestic and imported primary natural resources and their hidden flows. KW - Groundwater remediation KW - Radionuclides PY - 2013 SN - 978-1-4419-0852-0 DO - https://doi.org/10.1007/SpringerReference_226449 SP - 1 EP - 36 PB - Springer CY - Berlin Heidelberg AN - OPUS4-28517 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Kalisch, U. A1 - Meinhardt, J. ED - Büyüköztürk, O. ED - Tasdemir, M.A. ED - Günes, O. ED - Akkaya, Y. T1 - Development and application of active thermography for monitoring of deterioration processes of historic structures N2 - As shown recently, the quantification of damage in historic masonry structures is possible by using active thermography. In this paper, a case study is presented concerning systematic studies of the determination of damage size and prognosis of damage increase inside a sandstone column by using different approaches of active thermography. Various heating sources as well as impulse and periodic heating have been compared. Reproducible investigations in regular time intervals for structural monitoring are possible. KW - Active thermography KW - Camera calibration KW - Historic structure KW - Monitoring KW - Sandstone PY - 2013 SN - 978-94-007-0722-1 DO - https://doi.org/10.1007/978-94-007-0723-8_154 SN - 2211-0844 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 6 SP - 1111 EP - 1116 PB - Springer AN - OPUS4-28263 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krankenhagen, Rainer A1 - Maierhofer, Christiane A1 - Röllig, Mathias ED - Büyüköztürk, O. ED - Tasdemir, M.A. ED - Günes, O. ED - Akkaya, Y. T1 - Thermographic investigation of delaminated plaster on concrete N2 - Active thermography is sensitive to inhomogeneities at and below the surface of objects investigated. Thus, it should be useful for detecting plaster delaminations on concrete. In this paper, the results of field and laboratory investigations into plaster-covered concrete were compared. For evaluating the bonding state of the plaster it is not sufficient to study only the thermal contrasts at the surface of the investigated objects. The experimental results suggest that the overall thermal behaviour has to be considered. KW - Active thermography KW - Bonding problems KW - Concrete KW - Plaster PY - 2013 SN - 978-94-007-0722-1 DO - https://doi.org/10.1007/978-94-007-0723-8_112 SN - 2211-0844 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 6 SP - 758 EP - 791 PB - Springer AN - OPUS4-28264 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Unger, Wolfgang T1 - Surface analysis - Auger electron spectroscopy N2 - Basic principles and technical realization of Auger Electron Spectroscopy (AES) are presented. Different modes of application are briefly addressed. These are spectroscopy at nanoscaled surface layers including quantitative element analysis and chemical state analysis, in-depth element analysis, imaging and element mapping. A survey on standards related to application of AES in surface chemical analysis is given. KW - Auger electron spectroscopy KW - AES KW - Surface analysis KW - Chemical state analysis KW - Depth profiling KW - Element analysis KW - Imaging KW - Surface chemical analysis PY - 2013 UR - http://www.sciencedirect.com/science/article/pii/B9780124095472005163 SN - 978-0-12-409547-2 DO - https://doi.org/10.1016/B978-0-12-409547-2.00516-3 SP - 466 EP - 475 PB - Elsevier Inc. AN - OPUS4-29263 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fischer, Hildegard A1 - Eckardt, Jürgen A1 - Berger, Wolfgang ED - Breh, W. T1 - Field Screening and Soil-Groundwater Path Assessment according to the Ordinance on Soil Conservation and Contaminated Sites (Bundes-Bodenschutz- und Altlastenverordnung, BBodSchV) T2 - 2nd International Conference on Strategies and Techniques for the Investigation and Monitoring of Contaminated Sites CY - Karlsruhe, Germany DA - 2001-05-14 KW - Vor-Ort-Analytik KW - Probenahme KW - Elutionen KW - Grundwassergefährdung PY - 2002 SN - 1-402-00739-6 SP - 15 EP - 20 PB - Kluwer Academics Publishers CY - Dordrecht AN - OPUS4-1003 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rabe, Torsten A1 - Rudert, Rainer A1 - Harbich, Karl-Wolfram A1 - Schiller, Wolfgang Arno T1 - Microstructural Characterization of Green Ceramic Tapes and Laminates T2 - Materials Week 2000 ; International Congress on Advanced Materials, Their Processes and Applications 2000 CY - Munich, Germany DA - 2000-09-25 PY - 2000 SN - 3-88355-296-8 CY - München AN - OPUS4-1006 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nehls, Irene A1 - Win, Tin ED - Zschunke, Adolf T1 - Reference Materials in Environmental Studies KW - Reference Materials KW - Analytical Chemistry KW - Calibration KW - Method Validation KW - Traceability PY - 2000 SN - 3-540-66776-8 SN - 0933-033X N1 - Serientitel: Springer Series in materials science – Series title: Springer Series in materials science IS - 40 SP - 143 EP - 165 PB - Springer CY - Berlin AN - OPUS4-1013 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Steckert, Carsten A1 - Witt, Klaus ED - Eschbach, R. T1 - Application of digital color image analysis for colorimetric quality evaluation of surface defects on paint coatings N2 - A method for the quality management of paint producers was developed that allows for an objective description of inhomogeneous fading of paint coatings after free weathering using relevant metric quantities such as color contrast, gradient of color contrast, and geometric features of the inhomogeneous structures. These may be quantified with the method of digital color image analysis. The first step to apply this technique means a systematic investigation of the color transformation properties specific of the selected input/output devices (CRT display, flatbed scanner) used for digital imaging. To build a color management system mathematical models of the color transformation processes were optimized and embedded in a commercial color image analysis software. The needed metric parameters, that evaluate the damages on the coated surfaces, must be deduced for highest possible agreement with visual judgements of experts on the categorization of the damages. 150 samples of paint coatings after weathering were selected to investigate this correlation. T2 - 6th Conference "Color Imaging: Device-Independent Color, Color Hardcopy, and Graphic Arts" CY - San José, CA, USA DA - 2001-01-23 KW - Free weathered paints KW - Inhomogeneous surface defects KW - Colorimetric quality evaluation KW - Analytical device calibration KW - Color image analysis PY - 2001 UR - http://cat.inist.fr/?aModele=afficheN&cpsidt=17427491 SN - 0-8194-3978-9 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 4300 SP - 337 EP - 347 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-1017 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ahlgrimm, Christine ED - Budäus, D. T1 - Kosten- und Leistungsrechnung in der Bundesanstalt für Materialforschung und -prüfung PY - 2000 SN - 3-409-11580-3 SP - 369 EP - 385 PB - Gabler CY - Wiesbaden AN - OPUS4-1039 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mittmann, Hans-Ulrich ED - Hansen, W. ED - Kamiske, G. F. T1 - Akkreditierung und Zertifizierung - ein weltweites System der Qualitätssicherung PY - 2003 SN - 3-936608-15-6 N1 - Serientitel: Digitale Fachbibliothek – Series title: Digitale Fachbibliothek SP - 1 EP - 34(?) PB - Symposion CY - Düsseldorf AN - OPUS4-1027 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schumacher, Gerhard A1 - Klingelhöffer, Hellmuth A1 - Rehfeldt, T. T1 - Changes in lattice structure and microhardness during thermal treatment of a NiCoCrAIY alloy N2 - The stability of microstructure and the microhardness of a NiCoCrAlY alloy was studied after thermal treatment at high temperatures and subsequent quenching into ice water. The alloy revealed mainly two ordered phases, a gamma' phase with L12 lattice structure and a beta phase with B2 structure. The gamma' phase is shown to become unstable in the temperature range between 1073 K and 1373 K where it undergoes an order-disorder phase transformation. The low transformation temperature compared to pure Ni3Al is ascribed to deviations from the Ni3Al stoichiometry and to the additional alloying elements Co and Cr. The gamma'-gamma order-disorder transformation is shown to be attended by a decrease in microhardness of about 30 %. T2 - Symposium M: Thermal Barrier Coatings; MRS (Materials Research Society) fall meeting CY - Boston, MA, USA DA - 2000-01-01 PY - 2000 SN - 0272-9172 N1 - Serientitel: Materials Research Society symposium proceedings – Series title: Materials Research Society symposium proceedings IS - 645 PB - Materials Research Society CY - Warrendale, Pa. AN - OPUS4-1052 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hässelbarth, Werner A1 - Bremser, Wolfram T1 - Correlation in chemical measurement T2 - 10th Congrès International de Métrologie ; 10th International Metrology Congress CY - Saint-Louis, France DA - 2001-10-22 PY - 2001 SN - 2-914324-00-6 SP - 1 EP - 5(?) PB - Collège Métrologie CY - Bagneux AN - OPUS4-1056 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molnarne, Maria A1 - Viczián, G. A1 - Kollár-Hunek, K. ED - Filka, J. T1 - Háromkomponensu rendszerek robbanáshtár-görbéjének numerikus közelítési problémái (deutsch: Numerische Interpolationsprobleme der Explosionsgrenzlinien von Dreistoffsystemen) T2 - M´´uszaki Kémiai Napok '01 CY - Veszprém, Hungary DA - 2001-04-24 PY - 2001 SN - 963-00-6467-7 SP - 88 EP - 93 CY - Veszprém AN - OPUS4-1112 LA - hun AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mayer, Norbert A1 - Kammermeier, Michael A1 - Schubert, Sven T1 - Berechnung, Simulation und Messung von Transportbeschleunigungen im Seeverkehr PY - 2001 SN - 3-18-091599-4 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1599 SP - 107 EP - 112 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-1118 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Xu, Ping A1 - Krause, Hans-Joachim A1 - Weber, Gert T1 - Vereinheitlichung von gefügten Dünnblechproben für Schwingversuche im Zeitfestigkeitsbereich PY - 2001 SN - 3-87155-671-8 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 213 SP - 59 EP - 68 PB - DVS-Verl. CY - Düsseldorf AN - OPUS4-1119 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomas, Hans-Martin T1 - Automated evaluation of eddy current measurements T2 - Meeting of NDT-Experts CY - Trest', Czech Republic DA - 2001-06-20 PY - 2001 SN - 80-2387263-X SP - 199 EP - 207 PB - Czech Society for Non-Destructive Testing CY - Trest' AN - OPUS4-1124 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Erhard, Anton T1 - Automated ultrasonic inspection systems T2 - Meeting of NDT-Experts CY - Trest', Czech Republic DA - 2001-06-20 PY - 2001 SN - 80-2387263-X SP - 55 EP - 62 PB - Czech Society for Non-Destructive Testing CY - Trest' AN - OPUS4-1126 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Goebbels, Jürgen A1 - Berger, U. ED - Meyer, R. T1 - Rapid Tooling and Computertomography for Aluminium Casting of Automotive Components T2 - International User's Conference on Rapid Prototyping & Rapid Tooling & Rapid Manufacturing (uRapid 2001) CY - Amsterdam, The Netherlands DA - 2001-05-28 PY - 2001 SN - 3-00-007945-9 SP - 1(?) EP - 8(?) CY - Magdeburg AN - OPUS4-1129 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Boubidi, Pascal A1 - Sievert, Rainer ED - Fuentes, M. T1 - Analysis of low-cycle fatigue at notches in a single crystal superalloy at high temperature T2 - 13th European Conference on Fracture CY - San Sebastián, Spain DA - 2000-09-06 KW - LCF KW - Kerben KW - Einkristalle KW - Turbinenschaufeln PY - 2000 SN - 0-08-043699-4 SN - 1566-1369 N1 - Serientitel: ESIS publication – Series title: ESIS publication IS - 26 PB - Elsevier CY - Amsterdam AN - OPUS4-1074 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Hennecke, Manfred A1 - Schulz, Ulrich T1 - Chemilumineszenzuntersuchungen an PE-HD als Schnelltest für die Wirksamkeit von Stabilisatoren unter Bewitterung und für den Einfluß einer Chemikalienbehandlung T2 - 29. Jahrestagung der GUS CY - Pfinztal bei Karlsruhe, Deutschland DA - 2000-03-29 PY - 2000 SN - 3-9806167-6-2 SP - 10-1-10-12 CY - Pfinztal AN - OPUS4-1081 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Unger, Wolfgang T1 - The Application of X-ray Photoelectron Spectroscopy (ESCA) and X-Ray Absorption Spectroscopy (NEXAFS) in Interface Analysis of Metallized Polymers T2 - Materials Week 2000 ; International Congress on Advanced Materials, Their Processes and Applications 2000 CY - Munich, Germany DA - 2000-09-25 PY - 2000 SN - 3-88355-296-8 CY - München AN - OPUS4-1106 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomas, Hans-Martin A1 - Junger, M. A1 - Krull, R. A1 - Rühe, S. T1 - Erste Erfahrungen beim Einsatz der Wirbelstromprüfung an Eisenbahnschienen N2 - Das Streckennetz der Deutschen Bahn wird mit Hilfe eines Schienenprüfzuges ständig auf betriebsbedingte Schädigungen überwacht. Bisher wurde hier ausschließlich das Ultraschallprüfverfahren eingesetzt. In Ergänzung dazu könnte die Wirbelstromprüfung für den Nachweis und die Bewertung spezieller Oberflächenrisse - sog. Head Checks - erfolgreich und wirtschaftlich sinnvoll eingesetzt werden. Über Laboruntersuchungen, die die grundsätzliche Eignung dieser Prüftechnik zeigten, wurde bereits berichtet. Der nächste Entwicklungsschritt besteht in der praktischen Erprobung unter realen Einsatzbedingungen. Hierbei stellen die hohen Prüfgeschwindigkeiten von bis zu 28 m/s (entsprechend 100 km/h Fahrgeschwindigkeit des Prüfzuges) eine besondere Herausforderung dar. Es gibt zahlreiche Probleme zu bewältigen. Diese betreffen beispielsweise die Sondenführung, die Signalfilterung, die Datenerfassung und die Unterdrückung von Störeinflüssen. Über erste Erfahrungen wird berichtet. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 KW - Schienenprüfzug KW - Head checks PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/61.htm SN - 3-931381-32-3 VL - 73-1 IS - 2 SP - 617 EP - 624 PB - DGZfP CY - Berlin AN - OPUS4-1107 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomas, Hans-Martin A1 - Pohl, Rainer T1 - Wirbelstromsonde für die Prüfung von Eisenbahn-Radscheiben N2 - Die Betriebsüberwachung der Radscheiben von Schienenfahrzeugen kann besonders wirt-schaftlich durchgeführt werden, wenn die Prüfung im eingebauten Zustand erfolgen kann. Hierzu kann z. B. eine Oberflächenprüfung nach dem Wirbelstromverfahren eingesetzt werden. Als Optimierungskriterien für die Sondenkonstruktion werden eine sehr hohe Prüfempfindlichkeit gegenüber kleinen Rissfehlern und eine gute Handhabbarkeit bei erschwerter Zugänglichkeit der Prüffläche gefordert. Hierzu wurde eine neuartige Wirbel-stromprüfsonde entwickelt. Die Besonderheit besteht darin, dass der Nachweis von sehr kurzen Rissen bei einer gleichzeitig großen Sensorspurbreite möglich ist. Der Zeitaufwand für die Radscheibenprüfung wird damit gegenüber dem bisherigen Stand der Technik um 2/3 reduziert. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 KW - Betriebsüberwachung von Radscheiben KW - Wirbelstromprüfung PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/97.htm SN - 3-931381-32-3 VL - 73-2 IS - 2 SP - 891 EP - 896 PB - DGZfP CY - Berlin AN - OPUS4-1108 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jaenisch, Gerd-Rüdiger A1 - Artemiev, Valentin M. A1 - Naumov, A. T1 - Statistical Estimation theory Approach for the Dynamic Image Reconstruction T2 - 2nd World Congress on Industrial Process Tomography CY - Hannover, Germany DA - 2001-08-29 KW - Dynamic image KW - Stochastic estimation KW - Dynamic reconstruction KW - Kalman filter PY - 2001 SN - 0-85316-224-7 N1 - Geburtsname von Jaenisch, Gerd-Rüdiger: Tillack, G.-R. - Birth name of Jaenisch, Gerd-Rüdiger: Tillack, G.-R. VL - 2 IS - Appendix 1 SP - 772 EP - 779 PB - Virtual Centre for Industrial Process Tomography CY - [Manchester] AN - OPUS4-1191 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Peplinski, Burkhard A1 - Schultze, Dietrich A1 - Wenzel, Klaus-Jürgen ED - Delhez, R. T1 - Interlaboratory comparison (Round Robin) of the application of the Rietveld method to quantitative phase analysis by X-ray and neutron diffraction T2 - 7th European Powder Diffraction Conference CY - Barcelona, Spain DA - 2000-05-20 KW - Interlaboratory comparison KW - Quality assurance KW - Quantitative phase analysis KW - Reference materials KW - Rietveld analysis KW - Round Robin KW - Silicon nitride KW - Statistical tests PY - 2001 SN - 0-87849-886-9 SN - 0255-5476 N1 - Serientitel: Materials science forum – Series title: Materials science forum IS - 378-381/1 SP - 124 EP - 129 PB - Trans Tech Publications CY - Uetikon-Zürich AN - OPUS4-1193 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Peplinski, Burkhard A1 - Wenzel, Klaus-Jürgen ED - Delhez, R. T1 - Proficiency testing of instruments - a key element for quality assurance in X-ray powder diffraction, Part 1: Matching the effort to the actual needs T2 - 6th European Powder Diffraction Conference CY - Budapest, Hungary DA - 1998-08-22 KW - Quality assurance KW - Proficiency testing KW - Performance testing KW - Intensity correction functions (ICF´s) KW - Rietveld analysis KW - Theta-compensating slits KW - Variable slits PY - 2000 SN - 0-87849-847-8 SN - 0255-5476 SP - 144 EP - 149 PB - Trans Tech Publ. CY - Uetikon-Zürich AN - OPUS4-1194 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Peplinski, Burkhard A1 - Schiller, Wolfgang Arno A1 - Wenzel, Klaus-Jürgen A1 - Schultze, Dietrich A1 - Schiemann, Ingrid ED - Delhez, R. T1 - Phase selective chemical analysis of multi-component solids by X-ray powder diffratio - On the composition of a-cordierite-like solid solutions crystallizing from non-stoichiometric glasses T2 - 5th European Powder Diffraction Conference CY - Parma, Italy DA - 1997-05-25 KW - Glass-ceramics KW - Cordierite KW - Solid solutions KW - Lattice parameter refinement KW - Whole-powder-pattern fitting KW - Rietveld analysis KW - Chemical analysis PY - 1998 SN - 0-87849-807-9 SN - 0255-5476 N1 - Serientitel: Materials science forum – Series title: Materials science forum IS - 278-281/2 SP - 578 EP - 583 PB - Trans Tech Publ. CY - Uetikon-Zürich AN - OPUS4-1196 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mietz, Jürgen A1 - Isecke, Bernd T1 - Stainless steels for applications in civil engineering T2 - Stainless Steel World Conference & Exposition CY - The Hague, The Netherlands DA - 2001-11-13 KW - Civil engineering KW - Atmospheric corrosion conditions KW - Stainless steels KW - Stress corrosion cracking KW - Approval PY - 2001 SN - 90-73168-14-7 IS - P0108 SP - 334 EP - 339 PB - KCI Publ. CY - Zutphen AN - OPUS4-1199 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mietz, Jürgen A1 - Isecke, Bernd ED - Lange, G. T1 - Analyse von Spannbetonschäden und Strategien zu deren Vermeidung T2 - 19. Tagung Werkstoffprüfung CY - Bad Nauheim, Deutschland DA - 2001-12-06 PY - 2001 SN - 3-527-30538-6 SP - 153 EP - 158 PB - Wiley-VCH CY - Weinheim AN - OPUS4-1216 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klinger, Christian A1 - Kinder, Joachim A1 - Ell, Matthias A1 - Klingbeil, Dietmar ED - Lange, G. T1 - Zwillingsbildung in Schiffbaustahl am Beispiel der M.V. ESTONIA T2 - 19. Tagung Werkstoffprüfung CY - Bad Nauheim, Deutschland DA - 2001-12-06 PY - 2001 SN - 3-527-30538-6 SP - 133 EP - 145 PB - Wiley-VCH CY - Weinheim AN - OPUS4-1220 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mietz, Jürgen ED - Banthia, N. T1 - Corrosion behaviour of stainless steels for use in ground anchors T2 - 3rd International Conference on Concrete under Severe Conditions ; 3rd CONSEC '01 CY - Vancouver, Canada DA - 2001-06-18 PY - 2001 SN - 0-88865-790-0 VL - 1 SP - 341 EP - 348 PB - Univ. British Columbia, Dep. of Civil Engineering CY - Vancouver AN - OPUS4-1135 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Wäsche, Rolf ED - Franek, F. T1 - Friction and wear behaviour of ceramic SiC-TiC-TiB2 composites under unlubricated oscillating sliding conditions T2 - 2nd World Tribology Congress ; 2nd WTC 2001 CY - Vienna, Austria DA - 2001-09-03 KW - Silicon carbide KW - Titanium carbide KW - Titanium diboride KW - Alumina KW - Oscillating sliding KW - Humidity PY - 2001 SN - 3-901657-07-X SP - 140 PB - ÖTG CY - Wien AN - OPUS4-1172 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Grätz, Rainer A1 - Förster, H. ED - Bothe, H. ED - Stolz, T. T1 - Deflagration, stabile/instabile Detonation - eine Flammendurchschlagsicherung für alle Fälle? T2 - 165. PTB-Seminar ; 9. BAM/PTB-Kolloquium CY - Braunschweig, Deutschland DA - 2001-09-11 PY - 2001 SN - 3-89701-741-5 SN - 1434-2391 IS - 20 SP - 48 EP - 56 PB - Wirtschaftsverl. NW CY - Bremerhaven AN - OPUS4-1175 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Redmer, Bernhard A1 - Onel, Yener A1 - Ewert, Uwe A1 - Lunin, V. A1 - Podobedov, D. T1 - Mechanisierte Durchstrahlungsprüfung - Innovative Techniken zur Bewertung von Rundschweißnähten T2 - Tagung Schweißen und Schneiden ; Große Schweißtechnische Tagung CY - Essen, Deutschland DA - 2001-09-11 PY - 2001 SN - 3-87155-674-2 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 216 SP - 243 EP - 247 PB - Verl. für Schweißen und Verwandte Verfahren, DVS-Verl. CY - Düsseldorf AN - OPUS4-1162 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gradt, Thomas A1 - Börner, Helmut A1 - Hübner, Wolfgang T1 - Low temperature tribology at the federal institute for materials research and testing N2 - Friction systems running in cryogenic environment are critical in respect to wear and frictional heat generation because in this temperature range, conventional lubricants can't be applied. In order to test the friction and wear behaviour of appropriate solid lubricants and wear resistant material combinations in cryogenic environment, including liquid hydrogen, special test rigs have been constructed. These devices provide test conditions for tribological investigations at temperatures ranging from 4.2K to room temperature in liquid or gaseous environment at pressures between 10-3 mbar and 20 bar. Investigations on polymers, composites and metals with and without coatings show that there is a broad variety of appropriate materials for cryogenic friction units, but the behaviour of austenitic steels in such systems gives an example of non sufficient knowledge in this field. T2 - 9th ESMATS, European Space Mechanisms and Tribology Symposium CY - Liège, Belgium DA - 2001-09-19 PY - 2001 UR - http://adsabs.harvard.edu/abs/2001ESASP.480..317G SN - 92-9092-761-5 SN - 0379-6566 N1 - Serientitel: ESA SP – Series title: ESA SP IS - 480 SP - 317 EP - 320 PB - ESA Publ. Division CY - Noordwijk AN - OPUS4-1164 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gradt, Thomas A1 - Börner, Helmut ED - Lehmann, J. T1 - Friction and Wear Testing in Liquid Hydrogen T2 - 4th HYPOTHESIS ; 4th International Symposium on Hydrogen Power - Theoretical and Engineering Solutions CY - Stralsund, Germany DA - 2001-09-09 KW - Tribology KW - Cryogenic engineering KW - Hydrogen environment KW - Test equipment KW - Steels PY - 2001 SN - 3-9807963-0-2 VL - 2 SP - 388 EP - 392 PB - Fachhochsch. CY - Stralsund AN - OPUS4-1165 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Hartelt, Manfred T1 - Einfluss elektrischer Spannungen auf Reibung und Verschleiß in wassergeschmierten Tribokontakten T2 - Tribologie-Fachtagung 2001 CY - Göttingen, Deutschland DA - 2001-09-24 PY - 2001 SN - 3-00-003404-8 VL - 1 SP - 12-1-12-10 PB - GfT CY - Moers AN - OPUS4-1166 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter T1 - Was muss man bei der Modellprüfung beachten? T2 - Tribologie-Fachtagung 2001 CY - Göttingen, Deutschland DA - 2001-09-24 PY - 2001 SN - 3-00-003404-8 VL - 1 SP - 4.5-1-4.5-3 PB - GfT CY - Moers AN - OPUS4-1167 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Hartelt, Manfred T1 - Tribologische Untersuchungen an metallischen Implantatwerkstoffen T2 - Tribologie-Fachtagung 2001 CY - Göttingen, Deutschland DA - 2001-09-24 PY - 2001 SN - 3-00-003404-8 VL - 1 SP - 16-1-16-10 PB - GfT CY - Moers AN - OPUS4-1168 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Appajaiah, Anilkumar A1 - Jankowski, Lukasz T1 - A review on aging or degradation of polymer optical fibers (POFs) - polymer chemistry and mathematical approach T2 - 10th POF 2001 ; 10th International Plastic Optical Fibres Conference CY - Amsterdam, The Netherlands DA - 2001-09-27 PY - 2001 SN - 3-905084-67-8 SP - 317 EP - 324 CY - Amsterdam AN - OPUS4-1169 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Völzke, Holger T1 - Begutachtungsaspekte zur Langzeitsicherheit T2 - Fachtagung "Standortnahe Zwischenlager" CY - Bonn, Deutschland DA - 2001-03-14 PY - 2001 SN - 3-926956-43-7 SP - 125 EP - 140 PB - INFORUM-Verl. CY - Bonn AN - OPUS4-1144 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ewert, Uwe A1 - Redmer, Bernhard A1 - Likhachov, A. A1 - Pickalov, V. T1 - Influence of Unsharpness on Crack Length Evaluation with Computerized Tomography Methods T2 - 2nd World Congress on Industrial Process Tomography CY - Hannover, Germany DA - 2001-08-29 KW - Crack inspection KW - X-ray-tomography KW - Crack overshoot PY - 2001 SN - 0-85316-224-7 VL - 2 IS - Appendix 1 SP - 711 EP - 718 PB - Virtual Centre for Industrial Process Tomography CY - [Manchester] AN - OPUS4-1150 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hünecke, Joachim A1 - Schöne, Dieter ED - Lange, G. T1 - Beobachtung des Kurzrissverhaltens unter Schwingbeanspruchung an glatten und gekerbten Proben des Werkstoffes Cm15 T2 - 19. Tagung Werkstoffprüfung CY - Bad Nauheim, Deutschland DA - 2001-12-06 PY - 2001 SN - 3-527-30538-6 SP - 214 EP - 219 PB - Wiley-VCH CY - Weinheim AN - OPUS4-1227 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Sander, Harro A1 - Hartelt, Manfred ED - Bartz, Wilfried J. T1 - Influence of temperature and relative humidity on friction and wear determined in unlubricated reciprocating sliding of steel/steel couples T2 - 13th International Colloquium Tribology CY - Ostfildern, Germany DA - 2002-01-15 PY - 2002 SN - 3-924813-48-5 VL - 2 SP - 1283 EP - 1291 PB - Technische Akademie Esslingen CY - Ostfildern AN - OPUS4-1228 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Hartelt, Manfred A1 - v. Oldenburg, G. ED - Bartz, Wilfried J. T1 - Tribological characterization of implant materials T2 - 13th International Colloquium Tribology CY - Ostfildern, Germany DA - 2002-01-15 PY - 2002 SN - 3-924813-48-5 VL - 3 SP - 2409 EP - 2416 PB - Technische Akademie Esslingen CY - Ostfildern AN - OPUS4-1229 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rudolphi, Reinald ED - Ruhnau, R. T1 - Fortschritte bei bauphysikalischen Temperatur- und Wärmebrückenberechnungen PY - 1998 SN - 3-8041-1596-9 IS - Festschrift zum 60. Geburtstag von Prof. Dr. Erich Cziesielski SP - 81 EP - 91 PB - Werner CY - Düsseldorf AN - OPUS4-1288 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kloß, Heinz A1 - Woydt, Mathias ED - Bartz, Wilfried J. T1 - Predicition of the Tribological Performance of Sliding Systems T2 - 13th International Colloquium Tribology CY - Ostfildern, Germany DA - 2002-01-15 PY - 2002 SN - 3-924813-48-5 VL - 2 SP - 839 EP - 845 PB - Technische Akademie Esslingen CY - Ostfildern AN - OPUS4-1290 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Jentsch, H.-G. A1 - Zeiler, E. A1 - Rosiwal, M. ED - Bartz, Wilfried J. T1 - Tribological Behaviour of Ti-6Al-4V T2 - 13th International Colloquium Tribology CY - Ostfildern, Germany DA - 2002-01-15 PY - 2002 SN - 3-924813-48-5 VL - 2 SP - 1317 EP - 1323 PB - Technische Akademie Esslingen CY - Ostfildern AN - OPUS4-1233 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Renate A1 - Rudolphi, Reinald T1 - Übertragbarkeit der Ergebnisse von Brandprüfungen im Kleinprüfstand (Vergleichsversuche) PY - 1982 SN - 0172-7613 VL - 84 IS - 56(D) SP - 1 EP - 27 PB - Wirtschaftsverl. NW CY - Bremerhaven AN - OPUS4-1239 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Wäsche, Rolf T1 - Friction and wear testing can steer the development of ceramic tribo materials T2 - 2nd World Tribology Congress ; 2nd WTC 2001 CY - Vienna, Austria DA - 2001-09-03 KW - Friction KW - Wear quantities KW - Humidity KW - Ball-on-disk KW - Wear particles PY - 2001 SN - 3-901657-09-6 SP - 141 PB - ÖTG CY - Vienna AN - OPUS4-1152 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter T1 - Influence of normal force and humidity on friction and wear of unlubricated steel / steel couples T2 - 2nd World Tribology Congress ; 2nd WTC 2001 CY - Vienna, Austria DA - 2001-09-03 KW - Reciprocating sliding KW - Stainless steel KW - Role reversal KW - Normal force KW - Relative humidity PY - 2001 SN - 3-901657-09-6 SP - 33 PB - ÖTG CY - Vienna AN - OPUS4-1153 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Hartelt, Manfred T1 - Influence of electrical voltages on friction and wear in water lubricated sliding of SiC/SiC-TiC T2 - 2nd World Tribology Congress ; 2nd WTC 2001 CY - Vienna, Austria DA - 2001-09-03 KW - Reciprocating sliding KW - Silicon carbide KW - Water lubrication KW - Electrical current KW - Wear quantities KW - Friction PY - 2001 SN - 3-901657-09-6 SP - 107 PB - ÖTG CY - Vienna AN - OPUS4-1154 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter T1 - Influence of counter body material and relative humidity on the tribological behaviour of steel / ceramic couples T2 - 2nd World Tribology Congress ; 2nd WTC 2001 CY - Vienna, Austria DA - 2001-09-03 KW - Ceramic KW - Bearing steel KW - Stainless steel KW - Relative humidity PY - 2001 SN - 3-901657-09-6 SP - 90 PB - ÖTG CY - Vienna AN - OPUS4-1155 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hieronymus, Hartmut A1 - Henschen, Philipp A1 - Hofmann, Martin A1 - Bender, Josef A1 - Wendler, Reinhold A1 - Plewinsky, Bodo A1 - Steinbach, J. ED - Pasman, H. T1 - Hazards of surface explosions T2 - 10th International Conference: Loss prevention and safety promotion in the process industries ; 620th Event of the European Federation of Chemical Engineering CY - Stockholm, Sweden DA - 2001-06-19 PY - 2001 SN - 0-444-50699-3 N1 - Serientitel: EFCE event – Series title: EFCE event IS - 620 SP - 897 EP - 908 PB - Elsevier CY - Amsterdam AN - OPUS4-1156 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hieronymus, Hartmut A1 - Kasch, Thomas A1 - Fomin, P. A1 - Trotsyuk, A. ED - Doerffer, P. T1 - Modeling of film and surface detonations T2 - 5th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows ; 5th ISAIF CY - Gdansk, Poland DA - 2001-09-04 PY - 2001 SN - 83-88237-35-7 VL - 2 SP - 935 EP - 943 PB - IFFM Publ. CY - Gda´ nsk AN - OPUS4-1157 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mitropetros, Constantinos A1 - Hieronymus, Hartmut A1 - Fomin, P. A1 - Taratuta, S. ED - Doerffer, P. T1 - Modeling of detonation wave initiation, limits and hazard of chemically active bubbles T2 - 5th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows ; 5th ISAIF CY - Gdansk, Poland DA - 2001-09-04 PY - 2001 SN - 83-88237-35-7 VL - 2 SP - 925 EP - 933 PB - IFFM Publ. CY - Gda´ nsk AN - OPUS4-1158 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Simone A1 - Kunze, Ralf A1 - Brademann-Jock, Kerstin A1 - Raabe, Hans-Joachim ED - Eichhorn, K.-J. ED - Fischer, D. T1 - Thermoluminescence - A useful method to investigate the stability of PP-fleece textiles T2 - 14th European Symposium on Polymer Spectroscopy ; 14th ESOPS CY - Dresden, Germany DA - 2001-09-02 PY - 2001 SN - 3-527-30474-6 SN - 1022-1360 IS - 184 SP - 106 PB - Wiley-VCH CY - Weinheim AN - OPUS4-1159 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bücker, Michael A1 - Böcker, Wolfgang D. G. A1 - Reinsch, Stefan A1 - Unger, Brita ED - Wielage, B. ED - Leonhardt, G. T1 - Entwicklung umweltverträglicher Holzverbundwerkstoffe mit verbesserter biologischer und Feuchtebeständigkeit T2 - Tagung "Verbundwerkstoffe und Werkstoffverbunde" CY - Chemnitz, Deutschland DA - 2001-09-05 PY - 2001 SN - 3-527-30319-7 SP - 463 EP - 467 PB - Wiley-VCH CY - Weinheim AN - OPUS4-1160 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Paasch, Sebastian A1 - Müller, Renate A1 - Rudolphi, Reinald A1 - Schriever, Robert T1 - Numerical Evaluation of Thermal Properties and Heat Transfer Conditions Based on Fire Tests on Protected and Unprotected Steel Columns T2 - 9th Interflam 2001 ; 9th International Fire Science and Engineering Conference CY - Edinburgh, Scotland, UK DA - 2001-09-17 PY - 2001 SN - 0-9532312-9-1 VL - 2 SP - 1383 EP - 1388 PB - Interscience Communications CY - London AN - OPUS4-1262 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rudolphi, Reinald A1 - Knublauch, Erwin T1 - Ein Verfahren zur Berechnung der Feuerwiderstandsdauer von Stahlbauteilen PY - 1970 SN - 0341-1664 VL - 5 IS - 10 SP - 41 EP - 90 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-1266 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mittag, Kornelia A1 - Gardei, André A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Wiggenhauser, Herbert A1 - Giertz, M. T1 - Verfahrensentwicklung zur Qualitätssicherung Fester Fahrbahnen mit zerstörungsfreien Prüfverfahren T2 - Symposium Feste Fahrbahn CY - Berlin, Deutschland DA - 2002-06-12 PY - 2002 SN - 3-9809335-3-9 SP - 1(?) EP - 10(?) PB - IFV Bahntechnik CY - Berlin ET - 2 AN - OPUS4-1395 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomas, Hans-Martin A1 - Pohl, Rainer A1 - Krull, R. A1 - Hintze, H. A1 - Rühe, S. T1 - Erfahrungen beim Einsatz der Wirbelstromprüfung an Schienen N2 - Kurzfassung Es wurde eine Prüftechnologie basierend auf dem Wirbelstromverfahren entwickelt, mit der es möglich ist, oberflächennahe Fehler in Schienen zu detektieren und zu bewerten. Die bisherigen Untersuchungen haben gezeigt, dass Fahrkantenfehler (Head Checks) mit Risstiefen bis zu 10 mm bewertet werden können. Darüber hinaus werden weitere Inhomogenitäten und Fehler wie z. B. Schleuderstellen, Belgrospi's und Squats detektiert. Für die Anwendung der Prüftechnologie kommen 4 Anwendungsgebiete in Frage: Ausrüstung von Schienenprüfzügen, Manuelle Schienenprüfung, Ausrüstung von Schienenschleifzügen, Ausrüstung von stationären Schienenprüfständen. Die Prüftechnik befindet sich zur Zeit in der Erprobungsphase. Der Schienenprüfzug der Deutschen Bahn AG wird in Kürze mit einem achtkanaligen Prüfsystem ausgerüstet. Ebenfalls im Erprobungseinsatz befindet sich ein Handprüfsystem zur manuellen Schienenprüfung. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v36/v36.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1391 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Meggyes, Tamás A1 - Tünnermeier, Torge ED - Prokop, G. T1 - Evaluation of long-term aspects of passive groundwater remediation techniques N2 - Long-term performance of permeable reactive barriers has been investigated in laboratory experiments using elemental iron and hydroxyapatite as reactive materials and uranium as contaminant. Accelerated testing has been performed by applying elevated pollutant concentration and an increased flow velocity. The spatial distribution of uranium in the test columns has been investigated using a radioactive tracer. The results show that the migration pattern exhibits a linear behaviour. T2 - 1st Image-Train Cluster-Meeting CY - Karlsruhe, Germany DA - 2001-11-07 PY - 2002 UR - http://www.perebar.bam.de/PereOpen/pdfFiles/midterm-Final.pdf SN - 3-85457-631-5 SP - 55-58; 145-150 PB - Federal Environment Agency CY - Wien AN - OPUS4-1354 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Brenneis, Rudolf A1 - Köcher, Peter T1 - Enzymatic production of biodegradable lubricants from waste fat T2 - 6th R '02 ; 6th World Congress on Integrated Resources Management CY - Geneva, Switzerland DA - 2002-02-12 PY - 2002 SN - 3-905555-23-9 SP - 1(?) EP - 7(?) PB - EMPA CY - [Dübendorf] AN - OPUS4-1355 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molnarne, Maria A1 - Dióspatonyi, I. A1 - Kollárné-Hunek, K. ED - Filka, J. T1 - Kémiai adatbankok szerepe a vegyészmérnöki képzésben (Die Rolle der chemischen Datenbanken in der Ausbildung von Verfahrenstechnikern) T2 - M´´uszaki Kémiai Napok '02 CY - Veszprém, Hungary DA - 2002-04-16 PY - 2002 SN - 963-7172-95-5 N1 - Geburtsname von Molnarne, Maria: Molnárné-Jobbágy, M. - Birth name of Molnarne, Maria: Molnárné-Jobbágy, M. SP - 107 CY - Veszprém AN - OPUS4-1357 LA - hun AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Molnarne, Maria A1 - Viczián, G. ED - Filka, J. T1 - Gázelegyek robbanási területének és ezzel kapcsolatos jellemzök megjelenítesének informatikai problémái (Informatik-Probleme bei der Darstellung der Explosionsbereiche von Gasgemischen) T2 - M´´uszaki Kémiai Napok '02 CY - Veszprém, Hungary DA - 2002-04-16 PY - 2002 SN - 963-7172-95-5 N1 - Geburtsname von Molnarne, Maria: Molnárné-Jobbágy, M. - Birth name of Molnarne, Maria: Molnárné-Jobbágy, M. SP - 102 EP - 106 CY - Veszprém AN - OPUS4-1358 LA - hun AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Buresch, I. A1 - Rehbein, P. ED - Franek, F. T1 - Possibilities of fretting corrosion model testing for contact surfaces of automotive connectors N2 - The number of electrical contacts in automotive applications increases steadily. The trends of miniaturisation in all fields of technique and the increasing demands concerning functionality, mechanical and thermal load require the permanent development of connectors. An improvement of electrical connectors can be achieved by coating of the connector elements. Additionally, the price of improved connectors has to remain as low as possible. One of the most important degradation processes that limits electrical functionality is fretting corrosion, caused by vibrations. The development of better coatings requires a check of functionality at a very early state of development. For this purpose different test facilities are available, that be used in order to qualify the improvement. In model tests with simple specimens made of original connector materials the electrical degradation mechanisms caused by friction and wear processes can be studied. It is shown for tin- and gold-coatings that in tribometer tests under certain parameters wear appearances and mechanisms can be similar to that in product testing. Thus, model testing methods can help to reduce time-to-market. T2 - 2nd World Tribology Congress ; 2nd WTC 2001 CY - Vienna, Austria DA - 2001-09-03 KW - Connector coatings KW - Fretting corrosion KW - Model testing KW - Contact resistance KW - Contact failure KW - Coating PY - 2001 UR - http://www.wieland.de/internet/index.jsp SN - 3-901657-07-X SP - 413 EP - 416 PB - ÖTG CY - Wien AN - OPUS4-1360 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jansen, Kirsten A1 - Schulz, Ulrich T1 - Prüfung des Einflusses saurer Niederschläge auf die Lebensdauer von Gewächshausfolien T2 - 31. Jahrestagung der GUS CY - Stutensee-Blankenloch bei Karlsruhe, Deutschland DA - 2002-03-13 PY - 2002 SN - 3-9806167-8-9 SP - 18-1-18-17 PB - GUS (Gesellschaft für Umweltsimulation) CY - Pfinztal (Berghausen) AN - OPUS4-1316 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Gaszner, K. A1 - Schulz, Ulrich A1 - Trubiroha, Peter T1 - Aufklärung der Ursachen für Lackschäden durch Umwelteinflüsse und Entwicklung praxisgerechter Prüfmethoden - Teil 1: Übertragung der Jacksonville Bewitterung auf eine Labor-Prüfmethode am Beispiel dekorative Eigenschaften und Kratzbeständigkeit T2 - DFO-Technologie-Tage Neue Entwicklungen zur Qualitätsprüfung in der Lackiertechnik CY - Münster, Deutschland DA - 2002-03-19 PY - 2002 SN - 3-932287-50-9 IS - 50 SP - 55 EP - 63 PB - DFO CY - Düsseldorf AN - OPUS4-1317 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Senoner, Mathias A1 - Unger, Wolfgang A1 - Koenders, L. A1 - Wilkening, G. ED - Hasche, K. ED - Mirande, W. ED - Wilkening, G. T1 - Results of the inter-laboratory comparison "Determination of nanometric step heights with AFM" T2 - 5th Seminar on Quantitative Microscopy ; 1st Seminar on Nanoscale Calibration Standards and Methods ; NanoScale 2001 CY - Bergisch Gladbach, Germany DA - 2001-11-15 PY - 2002 SN - 3-89701-840-3 SN - 0179-0609 N1 - Serientitel: PTB-Bericht: PTB-F – Series title: PTB-Bericht: PTB-F VL - F-44 IS - 44 SP - 70 EP - 77 PB - Wirtschaftsverl. NW CY - Bremerhaven AN - OPUS4-1327 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Merchel, Silke T1 - Erster internationaler Aluminium-26-Ringversuch T2 - GDCh-Jahrestagung Chemie 2001 ; Jahrestagung der GDCh-Fachgruppe Nuklearchemie CY - Würzburg, Deutschland DA - 2001-09-23 PY - 2001 SN - 3-924763-96-8 VL - 3 SP - 78 PB - Gesellschaft Deutscher Chemiker CY - Frankfurt am Main AN - OPUS4-1328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Wolfgang A1 - Eckardt, Jürgen ED - Rasemann, W. T1 - Probenahme leichtflüchtiger organischer Schadstoffe im Altlastenbereich T2 - 5. Tagung des Arbeitskreises Probenahme CY - Freiberg, Deutschland DA - 1999-11-05 KW - Probenahme KW - Headspace-Analytik KW - Gaschromatographie KW - Extraktionsverfahren KW - Boden KW - Altlasten PY - 1999 SN - 3-86012-091-3 SP - P3-1-P3-4 PB - TU Bergakademie CY - Freiberg AN - OPUS4-1342 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Wolfgang A1 - Eckardt, Jürgen A1 - Fischer, Hildegard T1 - Methodical aspects of soil sampling regarding the requirements of the federal soil protection act T2 - 7th International FZK/TNO Conference on Contaminated Soil ; 7th ConSoil 2000 CY - Leipzig, Germany DA - 2000-09-18 KW - Soil sampling KW - Federal soil protection act KW - Pollutants KW - VOC PY - 2000 SN - 0-7277-2954-3 VL - 1 SP - 278 EP - 279 PB - Telford CY - London AN - OPUS4-1345 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Wolfgang A1 - Fischer, Hildegard A1 - Eckardt, Jürgen ED - Sarsby, R. T1 - Aspects of site assessment for the soil-groundwater pathway T2 - 3rd International Symposium on Geotechnics Related to the European Environment ; 3rd GREEN CY - Berlin, Germany DA - 2000-06-21 KW - Soil KW - Contamination assessment KW - Contaminated sites KW - Groundwater PY - 2001 SN - 0-7277-3004-5 SP - 490 EP - 492 PB - Telford CY - London AN - OPUS4-1348 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Eckardt, Jürgen A1 - Berger, Wolfgang A1 - Fischer, Hildegard ED - Gottlieb, J. T1 - On-site examination of a site contaminated by the tar- processing industry T2 - 1st International Conference on Strategies and Techniques for the Investigation and Monitoring of Contaminated Sites ; 1st International Conference Field Screening Europe - Strategies and Techniques for On-Site Investigation and Monitoring of Contaminated Soil, Water and Air CY - Karlsruhe, Germany DA - 1997-09-29 KW - Vor-Ort-Analytik KW - BTEX KW - Probenahme KW - Methoden-Vergleich KW - Altlasten PY - 1997 SN - 0-7923-4782-X SP - 393 EP - 397 PB - Kluwer CY - Dordrecht AN - OPUS4-1334 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Witt, Klaus ED - Chung, R. ED - Rodrigues, A. T1 - Colorimetric control of photographic prints - the problem of fluorescence T2 - 9th Congress of the International Colour Association ; 9th AIC Color CY - Rochester, NY, USA DA - 2001-06-24 KW - Fluoreszenz KW - Fotografie KW - Spektrometrie KW - Optische Qualitäts-Kontrolle KW - Fluorescence KW - Photographic prints KW - Colorimetry PY - 2001 SN - 0-8194-4128-7 DO - https://doi.org/10.1117/12.464659 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 4421 SP - 777 EP - 780 PB - SPIE, the International Society for Optical Engineering CY - Bellingham, Wash. AN - OPUS4-1416 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mayer, Norbert A1 - Munschau, Jürgen A1 - Vater, Ernst-Joachim A1 - Amberg, Claus ED - Mencík, J. T1 - Investigation of Road Pavements T2 - First International Conference Reliability and Diagnostics of Transport Structures and Means CY - Pardubice, Czech Republic DA - 2002-09-26 PY - 2002 SN - 9788071944645 SP - 194 EP - 199 PB - Univ. CY - Pardubice AN - OPUS4-1419 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wäsche, Rolf A1 - Steinborn, Gabriele A1 - Klaffke, Dieter ED - Somiya, S. T1 - Gas pressure sintering of SiCp-alumina composites made by gelcasting and their tribological properties N2 - COMPOSITE MATERIALS OF A 99.7 % ALPHA-ALUMINA MATRIX WITH PLATELETS OF SILICON CARBIDE (SICP) HAVE BEEN PREPARED BY GELCASTING. DENSIFICATION WAS CARRIED OUT BY GAS-PRESSURE SINTERING WITHOUT FURTHER SINTERING AIDS. FIVE DIFFERENT COMPOSITIONS WITH 0, 5, 10, 15, AND 20 VOL.% SICP RESP. HAVE BEEN INVESTIGATED AND TRIBOLOGICAL PROPERTIES WERE CHARACTERIZED. INCREASING AMOUNT OF SICP AS RIGID PARTICLES IN THE FINE GRAINED MATRIX COMPLICATE THE DENSIFICATION PROCESS. WITH THE APPLICATION OF 50 BAR AR PRESSURE DURING THE FINAL SINTERING STEP AT A TEMPERATURE OF 1700 DEGREE C THE DENSITY OF THE SAMPLES COULD BE INCREASED BY 3-5%. INVESTIGATION OF THE TRIBOLOGICAL PROPERTIES AGAINST STEEL AS A COUNTERBODY UNDER UNLUBRICATED OSCILLATING SLIDING CONDITIONS SHOWED A HIGH COEFFICIENT OF FRICTION AND AN INCREASING WEAR RATE UP TO A SICP CONTENT OF 10 VOL. % . AT 15 AND 20 VOL. % SICP RESP. BOTH THE COEFFICIENT OF FRICTION AND THE COEFFICIENT OF WEAR DROP DOWN. T2 - 3rd IUMRS International Conference on Advanced Materials (ICAM) CY - Tokyo, Japan DA - 1993-08-31 PY - 1994 SN - 0-444-81993-2 N1 - Serientitel: Transactions of the Materials Research Society of Japan – Series title: Transactions of the Materials Research Society of Japan IS - 16B SP - 791 EP - 794 PB - Elsevier CY - Amsterdam AN - OPUS4-1433 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Boubidi, Pascal A1 - Sievert, Rainer ED - Biallas, G. T1 - Experimental and Numerical Investigations of Macro-Crack Initiation under Low-Cycle Fatigue Loading at Notches in a Single Crystal Superalloy at High Temperature T2 - CAMP 2002 CY - Bad Lippspringe, Germany DA - 2002-04-03 KW - Single crystal KW - Notched specimens KW - Cracks KW - Lifetime KW - Turbine blades PY - 2002 SN - 3-00-009254-4 SP - 127 EP - 141 PB - Inst. für Prozess- und Werkstofftechnik CY - Paderborn AN - OPUS4-1436 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Yarim, Rasim A1 - Wäsche, Rolf A1 - Woydt, Mathias ED - Franek, F. T1 - Wear Behaviour of SiC-TiC-TiB2 Ceramic Composites Sliding against SiC up to 800°C and 2m/s T2 - 2nd World Tribology Congress ; 2nd WTC 2001 CY - Vienna, Austria DA - 2001-09-03 KW - Dry sliding KW - Tribochemistry KW - Silicon carbide KW - Titanium carbide KW - Titanium boride KW - High temperature KW - Ceramic composites PY - 2001 SN - 3-901657-07-X SP - 1(?) EP - 4(?) PB - ÖTG CY - Wien AN - OPUS4-1438 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wäsche, Rolf A1 - Klaffke, Dieter ED - Andersson, P. T1 - Tribological Behaviour of Multiphase Ceramic Composites in the System Si-Ti-B-C Containing Free Carbon T2 - 9th Nordic Symposium on Tribology ; 9th NORDTRIB 2000 CY - Porvoo, Finland DA - 2000-06-11 PY - 2000 SN - 951-38-5276-8 SN - 0357-9387 N1 - Serientitel: VTT Symposium – Series title: VTT Symposium VL - 1 IS - 200 SP - 186 EP - 195 PB - VTT, Technical Research Centre of Finland CY - Espoo AN - OPUS4-1439 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hünecke, Joachim A1 - Schöne, Dieter ED - Blom, A. F. T1 - Short Crack Behaviour in a Low Carbon Steel under Fatigue Loading T2 - 8th FATIGUE 2002 ; 8th International Fatigue Congress CY - Stockholm, Sweden DA - 2002-06-03 PY - 2002 SN - 1-901537-31-5 VL - 3 SP - 2021 EP - 2028 PB - EMAS, Engineering Materials Advisory Services CY - Cradley Heath, West Midlands AN - OPUS4-1411 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hünecke, Joachim A1 - Schöne, Dieter ED - McKeighan, P. C. ED - Ranganathan, N. T1 - Life prediction by observation and simulation of short crack behaviour in a low carbon steel T2 - Symposium on Fatigue Testing and Analysis under Variable Amplitude Loading Conditions CY - Tours, France DA - 2002-05-29 PY - 2002 SN - 0-8031-3479-7 SN - 1040-1695 N1 - Serientitel: ASTM STP – Series title: ASTM STP IS - 1439 SP - 34-1-34-3 PB - ASTM CY - West Conshohocken, Pa. AN - OPUS4-1412 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang A1 - Hofmann, Detlef A1 - Kohlhoff, Harald A1 - Knapp, Jürgen A1 - Brandes, Klaus A1 - Haenichen, H. A1 - Inaudi, D. ED - Inaudi, D. T1 - Complex measurement system for long-term monitoring of prestressed railway bridges of the new "Lehrter Bahnhof" in Berlin T2 - Smart structures and materials 2002 - Smart sensor technology and measurement systems CY - San Diego, CA, USA DA - 2002-03-18 KW - Fiber-optic sensors KW - Monitoring KW - Structure behaviour PY - 2002 SN - 0-8194-4442-1 DO - https://doi.org/10.1117/12.472624 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 4694 SP - 236 EP - 241 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-1456 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang A1 - Hofmann, Detlef A1 - Basedau, Frank A1 - Brandes, Klaus A1 - Barner, Andreas A1 - Crail, S. A1 - Reichel, D. A1 - Schreiner, U. A1 - Ecke, W. ED - Inaudi, D. T1 - Strain monitoring of a newly developed precast concrete track for high speed railway traffic using embedded fiber-optic sensors KW - Railway track system KW - Bonding behaviour KW - Fiber-optic sensor KW - Concrete composites PY - 2002 SN - 0-8194-4442-1 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 4694 SP - 259 EP - 264 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-1457 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang A1 - Hofmann, Detlef A1 - Gutmann, Toivo A1 - Basedau, Frank A1 - Molter, M. A1 - Hegger, J. ED - Inaudi, D. T1 - Characterization of bond performance of textiles in cement matrices using fiber optic sensors T2 - Smart structures and materials 2002 - Smart sensor technology and measurement systems CY - San Diego, CA, USA DA - 2002-03-18 KW - Textile reinforced concrete KW - Fibers KW - Concrete KW - Bond KW - Fiber-optic sensors PY - 2002 SN - 0-8194-4442-1 DO - https://doi.org/10.1117/12.472626 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 4694 SP - 253 EP - 258 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-1458 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ullner, Robert A1 - Helmerich, Rosemarie A1 - Knapp, Jürgen ED - Mencík, J. T1 - Laboratory model test for monitoring the new main railway station of Berlin - The Lehrter Bahnhof T2 - First International Conference Reliability and Diagnostics of Transport Structures and Means CY - Pardubice, Czech Republic DA - 2002-09-26 PY - 2002 SN - 9788071944645 SP - 1(?) EP - 8(?) PB - Univ. CY - Pardubice AN - OPUS4-1459 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hübert, Thomas A1 - Lorek, Andreas A1 - Wernecke, R. T1 - Quality Assurance for Industrial Coulometric Trace Humidity Measurement T2 - 4th International Symposium on Humidity and Moisture (ISHM) CY - Taipei, Taiwan DA - 2002-09-16 PY - 2002 SN - 9789577744234 VL - 4 SP - 1(?) EP - 7(?) PB - ITRI CY - Taipei AN - OPUS4-1460 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schenk, Gottfried A1 - Hansen, W. A1 - Hintze, H. A1 - Fischer, R. T1 - Ultraschallprüfung von Radsatzwellen mit Gruppenstrahlern - erste praktische Erfahrungen N2 - Zusammenfassung Bei der laufenden Instandhaltung der Schienenfahrzeuge werden die Radsätze auf Fehlerfreiheit geprüft. Dabei werden sowohl die Laufräder wie auch die Radsatzwellen einer zerstörungsfreien Prüfung mit Ultraschall unterzogen. Im Werk Wittenberge der DB Regio AG wurde im Jahre 2001 die bisher eingesetzte Handprüfung bzw. eine teilmechanisierte Prüfung mit konventioneller Technik durch eine mechanisierte automatische Prüfung mit Ultraschall-Gruppenstrahlertechnik abgelöst. Die bisherige individuelle Befundbewertung durch A-Bilder wurde durch eine numerische Rekonstruktion der Prüfdaten mit bildhafter Darstellung ersetzt. Dabei konnte die Prüfaussage signifikant verbessert und die Prüfzeit von bisher bis zu 30 Minuten auf 5 Minuten reduziert werden. Ziel bei der Prüfung von Radsatzvollwellen ist es, die Rad- und Bremsscheibensitze sowie sämtliche Querschnittsübergänge auf radiale Fehler, d.h. auf quer zur Längsachse liegende Risse, zu überprüfen. Die eingeschränkte Zugänglichkeit der Prüforte hätte beim Einsatz von konventioneller Technik eine Vielzahl von Winkelprüfköpfen erforderlich gemacht, was in der Praxis einen schwer zu bewältigenden Aufwand allein auf Seiten der Prüfmechanik mit sich gebracht hätte. Die Technik der laufzeitgesteuerten Gruppenstrahler ermöglicht es, sämtliche geforderten Prüfbereiche mit 4 Prüfköpfen zu erfassen. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Ultraschall Gruppenstrahler KW - Prüfung von Radsatzvollwellen KW - Bildhafte Auswertetechnik PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v34/v34.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1461 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hitzegrad, Frank A1 - Berger, Georg A1 - Ploska, Ute A1 - Öchsner, A. T1 - Comparison of static and dynamical analysis material properties of opencell ZrO2 foams T2 - Materials Week 2002 ; European Congress on Advanced Materials, their Processes and Applications ; 6th International Conference on Joining Ceramics, Glass and Metal CY - Munich, Germany DA - 2002-09-30 PY - 2002 SN - 3-88355-314-X PB - Werkstoff-Informationsges. AN - OPUS4-1462 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stade, Jürgen A1 - Ewert, Uwe A1 - Strauch, Monika A1 - Lotze, Gert T1 - Erfahrungen aus einem Ringversuch zur Vorbereitung einer Revision der Norm EN 584, Industrielle Filme für die Durchstrahlungsprüfung - Teil 1: Klassifizierung von Filmsystemen für die industrielle Durchstrahlungsprüfung T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 PY - 2002 SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1443 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stade, Jürgen A1 - Ewert, Uwe A1 - Strauch, Monika A1 - Lotze, Gert T1 - Erfahrungen aus einem Ringversuch zur Vorbereitung einer Revision der Norm EN 584 - Teil 1 N2 - Zusammenfassung Für die kennzeichnenden Größen eines industriellen Röntgenfilmsystems sind in der Norm EN 584-1 Grenzwerte für die Zugehörigkeit zu einer Filmsystem-Klasse sowie Messvorschriften für die Bestimmung der Kennwerte angegeben. Diese Messvorschriften erwiesen sich in der Praxis als zu großzügig gefasst. Der Ringversuch, an dem Filmhersteller und die BAM im Rahmen einer Ad Hoc Group der WG1 des CEN TC 138 teilnahmen, bestätigte das mit seinen beträchtlich voneinander abweichenden Ergebniswerten. Aus seinen Ergebnissen können Hinweise für präzisierte Messvorschriften und Algorithmen entnommen werden. Zusammen mit unabhängig davon durchgeführten Stichproben-Messungen der BAM an Filmsystemen vom Markt geben die Ergebnisse des Ringversuchs Hilfe für die Korrektur von Klassengrenzen der Norm. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Filmklassifizierung KW - Ringversuch KW - Messvorschriften KW - EN 584-1 PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p16/p16.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD SP - 1 EP - 9(?) PB - DGZfP CY - Berlin AN - OPUS4-1444 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Rita A1 - Klein-Hartwig, Karin A1 - Boissière, Claudia A1 - Kretzschmar, Hans-Jürgen T1 - Reduction of the emission of harmful substances from rubber based commodity articles T2 - 3rd RubberChem 2002 ; 3rd International Rubber Chemicals, Compounding and Mixing Conference CY - Munich, Germany DA - 2002-06-11 PY - 2002 SN - 978-1-85957-316-7 N1 - Geburtsname von Krüger, Rita: Auerbach, R. - Birth name of Krüger, Rita: Auerbach, R. SP - 51 EP - 57 PB - RAPRA Technology Ltd. CY - Shawbury AN - OPUS4-1451 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Karsten A1 - Pusch, G. ED - François, D. ED - Pineau, A. T1 - Use of charpy impact testing to evaluate crack-arrest fracture toughness KW - Charpy-V KW - Instrumented impact test KW - Crack arrest fracture toughness KW - Ferritic structural steel PY - 2002 SN - 0-08-043970-5 SN - 1566-1369 N1 - Serientitel: ESIS publication – Series title: ESIS publication IS - 30 SP - 263 EP - 270 PB - Elsevier CY - Amsterdam AN - OPUS4-1427 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Plewinsky, Bodo A1 - Hieronymus, Hartmut A1 - Rockland, Ulrike A1 - Henschen, Philipp A1 - Hofmann, Martin ED - Kreysa, G. T1 - Heterogene Detonationen T2 - 35. Tutzing-Symposion CY - Tutzing, Deutschland DA - 1997-03-10 PY - 1997 SN - 3-926959-89-4 SN - 0934-4969 N1 - Serientitel: Praxis der Sicherheitstechnik – Series title: Praxis der Sicherheitstechnik IS - 4 SP - 95 EP - 109 PB - DECHEMA CY - Frankfurt am Main AN - OPUS4-1486 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hieronymus, Hartmut A1 - Plewinsky, Bodo T1 - Anwendbarkeit sicherheitstechnischer Kenngrößen zur Beschreibung der Explosionsgefahren im heterogenen System organisches Lösemittel/gasförmiges Oxidationsmittel T2 - 8. Kolloquium zu Fragen der Chemischen und Physikalischen Sicherheitstechnik CY - Berlin, Deutschland DA - 1999-06-01 PY - 1999 SN - 3-89701-293-6 SP - 59 EP - 70 PB - Wirtschaftsverl. NW Verlag für neue Wissenschaft GmbH CY - Bremerhaven AN - OPUS4-1490 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dietlen, Siegmund A1 - Hieronymus, Hartmut A1 - Krause, Ulrich A1 - Plewinsky, Bodo A1 - Schröder, Volkmar A1 - Brandes, E. A1 - Redeker, T. ED - Steen, H. T1 - Sicherheitstechnische Kenngrößen von Gasen und Dämpfen von Flüssigkeiten PY - 2000 SN - 3-527-29848-7 SP - 319 EP - 375 PB - Wiley-VCH CY - Weinheim AN - OPUS4-1491 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Plewinsky, Bodo A1 - Hieronymus, Hartmut ED - Hattwig, M. T1 - Heterogene Systeme aus organischen Flüssigkeiten und Sauerstoff PY - 2000 SN - 3-527-30718-4 SP - 518 EP - 561 PB - Wiley-VCH CY - Weinheim AN - OPUS4-1492 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brademann-Jock, Kerstin A1 - Krüger, Simone A1 - Raabe, Hans-Joachim A1 - Schulz, Ulrich ED - Adler, H.-J. T1 - Thermoluminescence - a new method to investigate weathering effects of automotive coatings T2 - 26th FATIPEC Congress CY - Dresden, Germany DA - 2002-09-09 PY - 2002 SN - 3-527-30477-0 SN - 1022-1360 N1 - Serientitel: Macromolecular symposia – Series title: Macromolecular symposia IS - 187 SP - 44 PB - Wiley-VCH CY - Weinheim AN - OPUS4-1476 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Jansen, Kirsten A1 - Schulz, Ulrich A1 - Tjandraatmadja, G. T1 - Combining artificial weathering with chemiluminescence for lifetime predictions of polymeric materials N2 - While artificial weathering is a long-established tool to investigate long-term behaviour of polymers at outdoor conditions, the use of chemiluminescence as a highly sensitive and broadly applicable sensor for the effected change is a recent addition. This combination of artificial weathering with chemiluminescence could already be successfully applied to differentiate and evaluate long-term stability of various real use polymeric building materials relatively to each other and promises to be a useful tool for a variety of other polymeric materials as well. T2 - 9th International Conference on Durability of Building Materials and Components ; 9dbmc CY - Brisbane, Australia DA - 2002-03-17 KW - Chemiluminescence KW - Lifetime assessment KW - Weathering KW - Polymer PY - 2002 SN - 0-643-06827-9 VL - 3 IS - 239 SP - 1 EP - 10 PB - Commonwealth Scientific and Industrial Research Organization CY - Collingwood, VIC AN - OPUS4-1549 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Jörg A1 - Lenzner, Matthias A1 - Martin, Sven A1 - Lenner, M. A1 - Spielmann, C. A1 - Fiedler, A. A1 - Kautek, Wolfgang ED - Phipps, C. R. T1 - Femtosecond laser induced damage in absorbing filters used for laser protection N2 - Damage experiments of absorbing filters (Schott BG18 and BG36) were performed with Ti:sapphire laser pulses with durations from 30 fs to 340 fs (800 nm, 1 kHz) in air. The direct focusing technique was employed under single- and multi-pulse irradiation conditions. Ablation threshold fluences were determined from a semi-logarithmic plot of the ablation crater diameter vs. laser fluence. The damage threshold fluence decreases for shorter pulse durations. In the investigated pulse duration range, the measured multi-pulse ablation threshold fluences are practically similar to those of undoped glass material (~1 Jcm-2). That means that the multi-pulse ablation threshold is independent on the doping level of the filters. For more than 100 pulses per spot and all pulse durations applied, the threshold fluence saturates. This leads to technically relevant damage threshold values in the femtosecond laser pulse duration domain. T2 - 4th SPIE's International Conference on High-Power Laser Ablation CY - Taos, NM, USA DA - 2002-04-22 KW - Ablation KW - Damage KW - Eye protection KW - Femtosecond pulse laser KW - Incubation KW - Laser safety KW - Threshold fluence PY - 2002 SN - 0-8194-4524-X DO - https://doi.org/10.1117/12.482109 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series VL - 1 IS - 4760 SP - 398 EP - 405 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-1550 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kautek, Wolfgang A1 - Daminelli-Widany, Grazia A1 - Meja, P. A1 - Cortona, Anna A1 - Krüger, Jörg A1 - Autric, M. ED - Phipps, C. R. T1 - Femtosecond and nanosecond laser removal of anodic oxide layers from aluminium T2 - 4th SPIE's International Conference on High-Power Laser Ablation CY - Taos, NM, USA DA - 2002-04-22 KW - Laser ablation KW - Laser spallation KW - Microphone KW - Acoustical measurement KW - Aluminium oxide PY - 2002 SN - 0-8194-4524-X SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 4760 SP - 239 EP - 246 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-1551 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Hartelt, Manfred T1 - Reibungs- und Verschleißuntersuchungen an Ti-6Al-4V in wässrigen Medien T2 - Tribologie-Fachtagung 2002 CY - Göttingen, Deutschland DA - 2002-09-23 PY - 2002 SN - 3-00-003404-8 VL - 1 SP - 15-1-15-11 PB - GfT CY - Moers AN - OPUS4-1536 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rother, A. A1 - Kniess, T. A1 - Bergmann, R. A1 - Kraus, Werner A1 - Jungclas, H. A1 - Spies, H. ED - Marino, N. T1 - Investigations on redox-active pyridium salt - dihydropyridine bearing Tc- and Re- complexes T2 - 6th International Symposium on Technetium in Chemistry and Nuclear Medicine CY - Bressanone, Italy DA - 2002-09-04 PY - 2002 SN - 88-86281-73-0 N1 - Serientitel: Technetium, rhenium and other metals in chemistry and nuclear medicine – Series title: Technetium, rhenium and other metals in chemistry and nuclear medicine VL - 6 IS - 6 SP - 73 EP - 78 PB - SGEditoriali CY - Padova AN - OPUS4-1558 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pohl, Rainer A1 - Erhard, Anton A1 - Montag, Hans-Joachim A1 - Thomas, Hans-Martin A1 - Wüstenberg, Hermann ED - Forde, M. C. T1 - NDT techniques for railroad wheel and gauge corner inspection T2 - 5th Railway Engineering Conference CY - London, England, UK DA - 2002-07-03 KW - Non-destructive testing method KW - Ultrasonic and eddy current techniques KW - Railway track and wheel inspection PY - 2002 SN - 0-947644-49-0 SP - 1 EP - 14(?) PB - Engineering Technics Press CY - Edingburgh AN - OPUS4-1561 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schartel, Bernhard A1 - Kunze, Ralf A1 - Neubert, Dietmar A1 - Braun, Ulrike ED - Lewin, M. T1 - Mechanistic Studies on PA-66 Fire Retarded with Red Phosphorus T2 - 13th Conference on Recent Advances in Flame Retardancy of Polymeric Materials ; 13th Annual BCC Conference on Flame Retardancy CY - Stamford, CT, USA DA - 2002-06-03 PY - 2002 SN - 1-569-65890-0 VL - 13 SP - 93 EP - 103 PB - BCC CY - Norwalk, Conn. AN - OPUS4-1562 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Plewinsky, Bodo ED - Czichos, Horst T1 - Chemie PY - 2000 SN - 3-540-66882-9 SP - C1 EP - C88 PB - Springer CY - Berlin ET - 31., neubearb. und erw. AN - OPUS4-1493 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kloß, Heinz A1 - Santner, Erich A1 - Dimitriev, A. A1 - Shilko, E. A1 - Psakhie, S A1 - Popov, V. T1 - 2D und 3D Simulationsrechnungen mit der Methode der beweglichen zellularen Automaten (bzA) zur Bewertung des Reibungs- und Verschleißverhaltens von Werkstoffen T2 - Tribologie-Fachtagung 2002 CY - Göttingen, Deutschland DA - 2002-09-23 PY - 2002 SN - 3-00-003404-8 VL - 1 SP - 32-1-32-9 PB - GfT CY - Moers AN - OPUS4-1527 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kloß, Heinz A1 - Santner, Erich A1 - Dimitriev, A. A1 - Shilko, E. A1 - Psakhie, S A1 - Popov, V. ED - Pyrz, R. T1 - 2D and 3D modelling of indentation and scratching test on the base of Movable Cellular Automata (MCA) method T2 - International Conference on New Challenges in Mesomechanics ; Conference Mesomechanics 2002 CY - Aalborg, Denmark DA - 2002-08-26 PY - 2002 SN - 87-89206-59-2 VL - 2 SP - 557 EP - 563 CY - Aalborg AN - OPUS4-1528 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wandrey, Peter-Andreas A1 - Wehrstedt, Klaus-Dieter ED - Kreysa, G. T1 - Sensibilisierung flüssiger organischer Peroxide gegen Detonationsstoß durch Kavitation - überzogenes oder praxisrelevantes Prüfverfahren? T2 - 35. Tutzing-Symposion CY - Tutzing, Deutschland DA - 1997-03-10 PY - 1997 SN - 3-926959-89-4 SN - 0934-4969 N1 - Serientitel: Praxis der Sicherheitstechnik – Series title: Praxis der Sicherheitstechnik IS - 4 SP - 133 EP - 146 PB - DECHEMA CY - Frankfurt am Main AN - OPUS4-1505 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wehrstedt, Klaus-Dieter A1 - Wandrey, Peter-Andreas ED - Frobese, D.-H. ED - Krämer, H. T1 - Abbrandverhalten von flüssigen explosionsfähigen Stoffen in Abhängigkeit von der Pool-Größe T2 - 6. Sicherheitstechnische Vortragsveranstaltung über Fragen des Explosionsschutzes ; 107. PTB-Seminar CY - Braunschweig, Deutschland DA - 1993-09-07 PY - 1993 SN - 3-89429-359-4 SN - 0341-6739 IS - W-54 SP - 97 EP - 108 PB - Wirtschaftsverl. NW CY - Bremerhaven AN - OPUS4-1506 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - van Dijk, P. A1 - Kassman Rudolphi, A. A1 - Klaffke, Dieter ED - Johler, W. T1 - Investigations on Electrical Contacts Subjected to Fretting Motion N2 - This paper discusses the results and the consequences of the results obtained in a finished project on fretting testing at very small amplitudes. In this project a crossed cylinders model contact (radius 2.5 mm) was tested mainly in tangential oscillatory modes with strokes 2-100 µm, with forces between 0.5 and 5 N and frequencies of 1 and 10 Hz, financed by the European Commission. For non-noble contact platings it has been shown that very small amplitudes (< 10 µm) result in surface damage and contact failure. For noble platings it results in surface damage, only followed by contact failure after wear causes exposure of the non-noble underlayer. The most important conclusion from the project work was that the contact resistance remains low and stable in partial slip, while gross slip causes electrical failure(>0.5 .). In this paper the following items are discussed: i) The application of the Mindlin theory to predict the transition from partial to gross slip ii) Aspects of tribo simulation testing of electrical contacts iii) The methods of extending the allowable external displacement amplitude by additional springs that absorb part of the motion, and iv) The options if large vibrations at the contact interface can not be avoided. T2 - 21st International Conference on Electrical Contacts ; 21st ICEC 2002 ; 21st Internationale Tagung über Elektrische Kontakte CY - Zurich, Switzerland DA - 2002-09-09 PY - 2002 UR - http://www.pvdijk.com/pdf/21thicecinvestigationsonfretting.pdf SN - 3-9522504-0-6 SP - 189 EP - 195 PB - SEV CY - Fehraltorf AN - OPUS4-1626 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klyszcz, Andreas A1 - Hübert, Thomas A1 - Sperling, R. A1 - Mathis, W. T1 - Patterned Sol-Gel-Derived Multifunctional Passivation Coatings T2 - Materials Week 2002 ; European Congress on Advanced Materials, their Processes and Applications ; 6th International Conference on Joining Ceramics, Glass and Metal CY - Munich, Germany DA - 2002-09-30 PY - 2002 SN - 3-88355-314-X PB - Werkstoff-Informationsges. AN - OPUS4-1614 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kautek, Wolfgang A1 - Ligterink, F. J. A1 - Pedersoli Jr., J. L. A1 - Teule, R. A1 - Havermans, J. A1 - Balas, C. A1 - Pentzien, Simone A1 - Rudolph, Pascale ED - Daniels, V. T1 - Laser technology as a solution to unanswered cleaning problems in paper conservation - PARELA - a new European cooperative research project T2 - Baltimore Congress CY - Baltimore, MD, USA DA - 2002-09-02 PY - 2002 SN - 0-9500525-7-4 SP - 1(?) EP - 2(?) CY - London AN - OPUS4-1584 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gorokhovatsky, Y.A. A1 - Krüger, Simone A1 - Brademann-Jock, Kerstin A1 - Stark, Wolfgang A1 - Temnov, Dmitri A1 - Kuvshinova, Oksana A1 - Goldade, V.A. ED - Fleming, R. J. T1 - Thermally stimulated luminescence in LDPE fibers T2 - 11th International Symposium on Electrets (ISE 11) CY - Melbourne, Australia DA - 2002-10-01 PY - 2002 SN - 0-7803-7560-2 SP - 138 EP - 140 PB - IEEE Service Center CY - Piscataway, NJ AN - OPUS4-1654 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schulz, Ulrich A1 - Jansen, Kirsten A1 - Braig, A. ED - Marosi, G. J. T1 - Light stabilizers under attack by acid rain T2 - 2nd International Conference on Modification, Degradation and Stabilization of Polymers ; 2nd MoDeSt CY - Budapest, Hungary DA - 2002-06-30 PY - 2002 SN - 3-527-30706-0 SN - 1022-1360 N1 - Serientitel: Macromolecular symposia – Series title: Macromolecular symposia IS - 202 SP - 1 PB - Wiley-VCH CY - Weinheim AN - OPUS4-1645 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schulz, Ulrich A1 - Tjandraatmadja, G. T1 - The influence of rain and humidity on the lifetime of transparent polymeric roof materials N2 - PMMA and PC undergo photochemical aging leading to a gradual loss of material transparency and appearance during service life, which is desired to reach 50 years or more. Available artificial weathering test methods are unable to distinguish materials in terms of the speed of aging in outdoor use as roof materials. In order to design an appropriate accelerated or time-compressed test method, the 'worst case' scenario of the respective climatic conditions must be found. Therefore, samples of PMMA and PC were exposed to artificial weathering tests using different climatic conditions in terms of relative humidity and surface wetness. In the case of PMMA, it was found that water accelerates the photo degradation enormously. The fastest aging occurred when liquid water and UV radiation acted simultaneously on the sample surface and the PMMA reached its highest water content during weathering. In the case of PC, it was found that both vapour and liquid water speed up the photoaging, similarly to PMMA. But differently from PMMA, the worst case scenario for PC proved to be weathering conditions with high relative humidity. A test method has to be able to run artificial weathering under the different moisture conditions which can occur in the field. T2 - 9th International Conference on Durability of Building Materials and Components ; 9th dbmc CY - Brisbane, Australia DA - 2002-03-17 PY - 2002 UR - http://www.irbnet.de/daten/iconda/CIB9871.pdf SN - 0-643-06827-9 IS - paper 028 SP - 1(?) PB - Commonwealth Scientific and Industrial Research Organization CY - Collingwood, VIC AN - OPUS4-1646 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz A1 - Said, Samir A1 - Rücker, Werner ED - Sarsby, R. T1 - Prospecting soft deposits by wave propagation analysis in theory and experiment T2 - 3rd International Symposium on Geotechnics Related to the European Environment ; 3rd GREEN CY - Berlin, Germany DA - 2000-06-21 PY - 2001 SN - 0-7277-3004-5 SP - 65 EP - 73 PB - Telford CY - London AN - OPUS4-1594 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz A1 - Semrau, Norbert A1 - Schmid, Wolfgang A1 - Said, Samir A1 - Rücker, Werner ED - Grundmann, H. ED - Schuëller, G. I. T1 - Theory and experiments on wave propagation, on track-soil and on soil-building interaction related to railway induced vibration T2 - 5th International Conference on Structural Dynamics ; 4th International Conference on Structural Dynamics ; EURODYN 2002 CY - Munich, Germany DA - 2002-09-02 PY - 2002 SN - 90-5809-512-6 VL - 2 SP - 1137 EP - 1142 PB - Balkema CY - Lisse AN - OPUS4-1595 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz T1 - Die Fahrzeug-Fahrweg-Untergrund-Wechselwirkung bei der Festen Fahrbahn und beim Schottergleis T2 - Symposium Feste Fahrbahn CY - Berlin, Deutschland DA - 2002-06-12 PY - 2002 SN - 3-9809335-3-9 SP - 1(?) EP - 18(?) PB - IFV Bahntechnik CY - Berlin ET - 2 AN - OPUS4-1597 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meggyes, Tamás A1 - Simon, Franz-Georg A1 - Tünnermeier, Torge A1 - Debreczeni, Á. T1 - Fortschritte in der Bautechnik der reaktiven Wände T2 - 10. Braunschweiger Deponieseminar ; 10. Braunschweiger Deponieseminar Qualitätssicherung und Innovation CY - Braunschweig, Deutschland DA - 2002-03-21 PY - 2002 SN - 3-927610-60-7 N1 - Serientitel: Mitteilung des Instituts für Grundbau und Bodenmechanik - Technische Universität Braunschweig – Series title: Mitteilung des Instituts für Grundbau und Bodenmechanik - Technische Universität Braunschweig IS - 69 SP - 453 EP - 474 PB - Inst. für Grundbau und Bodenmechanik, TU Braunschweig CY - Braunschweig AN - OPUS4-1599 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Retzko, Iris A1 - Unger, Wolfgang A1 - Schulz, H. A1 - Scheibe, H.-J. A1 - Treu, Dieter A1 - Matsubayashi, N. T1 - Analysis of carbon materials by XPS T2 - Materials Week 2002 ; European Congress on Advanced Materials, their Processes and Applications ; 6th International Conference on Joining Ceramics, Glass and Metal CY - Munich, Germany DA - 2002-09-30 PY - 2002 SN - 3-88355-314-X PB - Werkstoff-Informationsges. AN - OPUS4-1734 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reiners, Georg A1 - Beck, Uwe A1 - Gamer, Nadja A1 - Schmidt, R. A1 - Weigl, B. ED - Beckmann, D. T1 - Topographische Charakterisierung von Oberflächen im steriltechnischen Anlagenbau T2 - 11. Heiligenstädter Kolloquium CY - Heiligenstadt, Deutschland DA - 2002-09-30 PY - 2003 SN - 3-00-011287-1 SP - 33 EP - 39 PB - Inst. für Bioprozess- und Analysenmesstechnik CY - Heiligenstadt AN - OPUS4-1738 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ullner, Christian A1 - Reich, T. T1 - Study on the capability of materials as reference blocks for the macro range of instrumented indentation test N2 - Part 3 of the ISO 14577 ¡°Instrumented indentation test for hardness and materials parameters¡° (IIT) concerns the calibration of reference blocks. Besides the widely spread activities for supplying reference blocks in the nano and micro range it is needed to be taken into account the macro range too. The paper reports on test results on ceramic materials which are tailored for reference blocks. The specimens made of Si3N4, SiC, or Al2O3 ceramics are highly homogenous and exhibit an increased quality with a roughness Ra ¡Ü 0.005 ¦Ìm. They are successfully used for reference blocks of the traditional Vickers and Knoop hardness. In comparison, the capability of hardened steel which is used for traditional hardness techniques is studied. T2 - International Conference on Force, Mass, Torque, Hardness and Civil Engineering Metrology in the Age Globalization CY - Celle, Germany DA - 2002-09-24 PY - 2002 UR - http://publica.fraunhofer.de/documents/N-171021.html SN - 3-18-091685-0 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1685 SP - 51 EP - 55 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-1740 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Griepentrog, Michael A1 - Ullner, Christian A1 - Dück, Alexander T1 - Instrumented indentation test for hardness and materials parameter from millinewtons to kilonewtons N2 - The ISO/DIS 14577 Metallic materials - Instrumented indentation test for hardness and materials parameters – Part 1-3 (IIT) concerns test forces up to 30 kN. The paper reports on IIT at test forces ranging from 0.002 N to 1000 N on non – magnetizable steel X8 CrMnN 18- 18 (1.386) with well polished surface using Vickers indenter and four hardness machines of different design (Nano Indenter XP, Fischerscope H 100, Zwick Z005 with Universal hardness head and a laboratory four-column set up materials testing machine) according to the standard. Using mostly identical test parameters the results of the different machines are almost in good agreement. Estimated small differences are caused by the different uncertainties of the used machines and by different methods of mathematical analysis of the detected raw data. T2 - International Conference on Force, Mass, Torque, Hardness and Civil Engineering Metrology in the Age Globalization CY - Celle, Germany DA - 2002-09-24 PY - 2002 SN - 3-18-091685-0 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1685 SP - 105 EP - 111 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-1741 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Subaric-Leitis, Andreas A1 - Seiffert, Bernhard A1 - Ullner, Christian A1 - Wöhry, C. T1 - Characterization of the dynamic behaviour of material testing machines T2 - International Conference on Force, Mass, Torque, Hardness and Civil Engineering Metrology in the Age Globalization CY - Celle, Germany DA - 2002-09-24 PY - 2002 SN - 3-18-091685-0 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1685 SP - 221 EP - 226 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-1742 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Knapp, Jürgen A1 - Helmerich, Rosemarie A1 - Habel, Wolfgang T1 - Monitoring bridges of the new Lehrter Bahnhof in Berlin by means of long-term stable sensors T2 - International Conference on Force, Mass, Torque, Hardness and Civil Engineering Metrology in the Age Globalization CY - Celle, Germany DA - 2002-09-24 PY - 2002 SN - 3-18-091685-0 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1685 SP - 153 EP - 158 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-1754 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang A1 - Hofmann, Detlef A1 - Basedau, Frank A1 - Barner, Andreas A1 - Crail, S. A1 - Reichel, D. A1 - Schreiner, U. A1 - Lindner, E. T1 - Static and dynamic measurements on a newly developed precast concrete track for high speed railway traffic using embedded fiber-optic sensors T2 - International Conference on Force, Mass, Torque, Hardness and Civil Engineering Metrology in the Age Globalization CY - Celle, Germany DA - 2002-09-24 KW - Railway track system KW - Bonding behaviour KW - Fibre-optic sensor KW - Concrete composites PY - 2002 SN - 3-18-091685-0 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1685 SP - 147 EP - 152 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-1755 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Herter, Jürgen A1 - Brandes, Klaus A1 - Helmerich, Rosemarie ED - Casas, J. R. T1 - Assessment of the safety and remaining fatigue life of old steel bridges by nondestructive field testing T2 - 1st International Conference on Bridge Maintenance, Safety and Management ; 1st IABMAS '02 CY - Barcelona, Spain DA - 2002-07-14 KW - Fatigue life KW - Steel bridge KW - Non destructive testing KW - Field test KW - Fracture mechanic KW - Radiographic testing PY - 2002 SN - 84-95999-05-6 PB - International Center for Numerical Methods in Engineering (CIMNE) CY - Barcelona AN - OPUS4-1756 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang ED - Mencík, J. T1 - Use of fibre optic sensor technology in civil engineering T2 - First International Conference Reliability and Diagnostics of Transport Structures and Means CY - Pardubice, Czech Republic DA - 2002-09-26 PY - 2002 SN - 9788071944645 PB - Univ. CY - Pardubice AN - OPUS4-1724 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reichel, D. A1 - Schreiner, U. A1 - Lindner, E. A1 - Habel, Wolfgang A1 - Hofmann, Detlef A1 - Basedau, Frank A1 - Barner, Daniel ED - Mencík, J. T1 - Strain Monitoring of a High Speed Railway Track Using Embedded Fibre-Optic Sensors T2 - First International Conference Reliability and Diagnostics of Transport Structures and Means CY - Pardubice, Czech Republic DA - 2002-09-26 PY - 2002 SN - 9788071944645 PB - Univ. CY - Pardubice AN - OPUS4-1725 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kenzler, D. A1 - Oblasser, Jörg A1 - Subaric-Leitis, Andreas A1 - Ullner, Christian T1 - Uncertainty in torque calibration using vertical torque axis arrangement and symmetrical two force measurement T2 - International Conference on Force, Mass, Torque, Hardness and Civil Engineering Metrology in the Age Globalization CY - Celle, Germany DA - 2002-09-24 PY - 2002 SN - 3-18-091685-0 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1685 SP - 337 EP - 342 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-1743 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ullner, Christian ED - Mencík, J. T1 - Improved reliability of testing by traceability and quality management T2 - First International Conference Reliability and Diagnostics of Transport Structures and Means CY - Pardubice, Czech Republic DA - 2002-09-26 PY - 2002 SN - 9788071944645 SP - 356 EP - 363 PB - Univ. CY - Pardubice AN - OPUS4-1744 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Noack, Volker A1 - Michael, Thomas T1 - Weichplasmaschweißen - Qualitativ hochwertige Überlappverbindungen an korrosionsbeständigen Werkstoffen T2 - Große Schweißtechnische Tagung CY - Kassel, Deutschland DA - 2002-09-25 PY - 2002 SN - 3-87155-679-3 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 220 SP - 308 EP - 315 PB - Verl. für Schweißen und Verwandte Verfahren, DVS-Verl. CY - Düsseldorf AN - OPUS4-1750 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marlow, Frank A1 - Dong, W. A1 - Hoffmann, Katrin A1 - Loerke, J. ED - Schüth, F. T1 - Optically and electronically functional materials PY - 2002 SN - 3-527-30246-8 SP - 3029 EP - 3063 PB - Wiley-VCH CY - Weinheim AN - OPUS4-1751 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schröder, Volkmar A1 - Dietlen, Siegmund T1 - Sicherheitstechnische Kenngrößen von Gasen bei nichtatmosphärischen Bedingungen T2 - 8. Kolloquium zu Fragen der Chemischen und Physikalischen Sicherheitstechnik CY - Berlin, Deutschland DA - 1999-06-01 PY - 1999 SN - 3-89701-293-6 SP - 77 EP - 84 PB - Wirtschaftsverl. NW Verlag für neue Wissenschaft GmbH CY - Bremerhaven AN - OPUS4-1688 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schröder, Volkmar A1 - Dietlen, Siegmund A1 - Schulze, Heinz-Peter ED - Mewis, J. J. ED - Pasman, H. J. ED - de Rademaeker, E. E. T1 - Investigation of the explosion range of the CFC-substitute 1,1,1,2-tetrafluorethane (R134a) under non-atmospheric conditions T2 - 8th International Symposium of Loss Prevention and Safety Promotion in Process Industries CY - Antwerp, Belgium DA - 1995-06-06 PY - 1995 SN - 0-444-82136-8 SP - 339 EP - 347 PB - Elsevier CY - Amsterdam AN - OPUS4-1674 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lüders, Günter ED - Delmas, P. T1 - Process model assisted quality control for hot hedge welding of landfill HDPE geomembranes T2 - 7th International Conference on Geosynthetics (ICG) CY - Nice, France DA - 2002-09-22 PY - 2002 SN - 90-5809-529-0 VL - 4 SP - 1491 EP - 1494 PB - Balkema CY - Lisse AN - OPUS4-1665 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Daubitz, R. A1 - Schmidt, Dirk A1 - Schröder, Volkmar ED - Bothe, H. ED - Stolz, T. T1 - Ermittlung von Kenngrößen für die Druckentlastung von Gasexplosionen bei höheren Anfangsdrücken T2 - 165. PTB-Seminar ; 9. BAM/PTB-Kolloquium CY - Braunschweig, Deutschland DA - 2001-09-11 PY - 2001 SN - 3-89701-741-5 SN - 1434-2391 IS - 20 SP - 69 EP - 78 PB - Wirtschaftsverl. NW CY - Bremerhaven AN - OPUS4-1694 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tessaro, Ute A1 - Erhard, Anton A1 - Brekow, Gerhard A1 - Mletzko, U. T1 - Charakterisierung oberflächennaher Fehler an plattierten Komponenten mittels Gruppenstrahlertechnik N2 - Zusammenfassung Nachdem Untersuchungen mit konventionellen Prüfköpfen an plattierten Bauteilen gezeigt haben, dass es möglich ist, mit Hilfe von Beugungsanzeigen bzw. -mustern die Größe und Tiefenlage von Fehlern im Plattierungsbereich zu bestimmen, wurde die Gruppenstrahlertechnik für Fehlersuche und -charakterisierung eingesetzt. Der Vorteil bei der Arbeit mit Gruppenstrahlerprüfköpfen besteht darin, dass in einer Messfahrt eine Reihe von Einschallwinkeln abgearbeitet werden kann. Dies vereinfacht und verkürzt die Prüfung wesentlich. So wurde von der ferritischen und der plattierten Seite der Testkörper mit der Impuls-Echo-Technik im halben Sprung, der TOFD-Technik und mit Sende-Empfangs-Prüfköpfen oberflächennah geprüft. Allerdings haben alle hier aufgeführten Verfahren ihre Grenzen, so sind z.B. Fehler, die eine Fehlergröße von £ 3 mm aufweisen, kaum noch zu charakterisieren. Hier ist nur der Nachweis möglich. Es hat sich außerdem gezeigt, dass die TOFD-Technik nur als Ergänzung zu anderen Techniken eingesetzt werden sollte, da das Potenzial für die Verwendung als Suchtechnik nicht ausreichend ist. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Fehlergrößenbestimmung KW - Gruppenstrahlerprüfköpfe KW - TOFD KW - Impuls-Echo-Technik KW - SEL-Prüfköpfe PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p07/p07.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1850 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tscharntke, Dirk A1 - Boehm, Rainer A1 - Erhard, Anton A1 - Wüstenberg, Hermann T1 - Fehlerdiagnose in der Ultraschallprüfung mit iterativer Modellierung N2 - Zusammenfassung Die verschiedenen Bewertungs- und Untersuchungsverfahren zur Fehlerdiagnose in der Ultraschallprüfung lassen in Abhängigkeit von der Prüfsituation nur eine fallweise Anwendung zu. Die erzielbaren Ergebnisse sind durch prinzipielle Grenzen, wie die orientierungsabhängigen Wechselwirkungen der Ultraschallwellen mit dem Fehler, in ihrer Genauigkeit stark begrenzt. Im allgemeinen enthalten sie nur einen Teil der für eine belastbare Fehlerdiagnose erforderlichen Informationen. Eine zuverlässige Bewertung ist meist durch die Zusammenfassung der Ergebnisse redundanter US- Verfahren und die Nutzung von a priori Informationen, z.B. aus der Fertigungsgeschichte einer Komponente, möglich. Der Einsatz mehrerer US-Prüfverfahren bedingt üblicherweise einen höheren Zeit-, Arbeits- und Kostenbedarf und sollte möglichst durch Verbesserung der Fehlerdiagnose mit einem Verfahren begrenzt werden. Die im Beitrag vorgestellte iterative Modellierung der Ultraschallprüfung bietet dazu eine Möglichkeit. Die Durchführung der Modellrechnungen beginnt mit der Aufstellung einer Fehlerhypothese unter Einführung von a priori Informationen. Die Nachrechnung der Fehlerhypothesen mit dem validierten und erprobten Modell ermöglicht den Vergleich mit den Messergebnissen. Die aufgestellten Fehlerhypothesen können so abgesichert, sowie Messergebnisse überprüft und bestätigt werden. Das Rechenmodell ermöglicht die Bewertung der Amplitude, der Laufzeit, der Echodynamik und des Anzeigenmusters, also aller auch bei anderen Bewertungs- und Untersuchungsverfahren herangezogenen Bewertungsmaßstäbe. Eine Kombination des Rechenmodells mit einer Evolutionsstrategie würde die Systematisierung des Verfahrens ermöglichen, ist jedoch mit Schwierigkeiten verbunden, wie im Beitrag gezeigt wird. Die iterative Modellierung besteht aus drei Teilprozessen, der Analyse der möglichen Wechselwirkungen, der Separation dieser Wechselwirkungen in diverse Schallwege und schließlich der Synthese der auf den verschiedenen Wegen berechneten Signale zum Gesamtsignal. Die ersten beiden Teilprozesse müssen z.Zt. auf Basis von Expertenwissen für jeden Prüffall neu gelöst werden. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Pipelines KW - Schweißnahtprüfung KW - Gruppenstrahlertechnik KW - Real-Time-Scanner KW - Gruppenstrahler-Prüfkopf mit 64 Schwingerelementen KW - Konventionelle Winkelprüfköpfe PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v54/v54.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1851 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brekow, Gerhard A1 - Erhard, Anton A1 - Schulz, Eduard A1 - Montag, Hans-Joachim A1 - Pörtzgen, N. T1 - BAM-RTD Phased Array Konzept für die Schweißnahtprüfung von Rohrleitungen N2 - Zusammenfassung Aus den Messergebnissen geht hervor, dass der Real-Time-Scanner den Reflektor-nachweis der konventionellen Prüfköpfe hinsichtlich des erreichten S/R-Abstandes erreicht und teilweise übertrifft. Weiterhin geht aus den Ergebnissen hervor, dass die Nachweisempfindlichkeit sehr empfindlich auf Abweichungen der Prüfkopf-positionierung reagiert. Nur wenn die optimale Fahrspur für jede Reflektortiefenlage getroffen wird, kann mit den konventionellen Prüfköpfen ein S/R-Abstand von mehr als 20 dB erreicht werden. Das bedeutet, dass mit den konventionellen Prüfköpfen immer mehrere parallele Fahrspuren mit kleinem Spurversatz gefahren werden müssen, um auch kleine Fehler in der Schweißnaht nachweisen zu können. Mit dem Real-Time-Scanner-Prüfkopf können mit einer einzigen Messfahrt und mit entsprechend vielen angepassten Messfunktionen mehrere parallele Fahrspuren durch elektronisch gesteuerte Bündelverschiebung erfasst werden. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Pipelines KW - Schweißnahtprüfung KW - Gruppenstrahlertechnik KW - Real-Time-Scanner KW - Gruppenstrahler-Prüfkopf mit 64 Schwingerelementen KW - Konventionelle Winkelprüfköpfe PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p10/p10.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1852 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - Natürliche und künstliche Alterung von Polymeren - Bericht über die XXII. Donauländergespräche T2 - 31. Jahrestagung der GUS, Gesellschaft für Umweltsimulation CY - Stutensee-Blankenloch bei Karlsruhe, Deutschland DA - 2002-03-13 PY - 2002 SN - 3-9806167-8-9 SP - 14-1-14-7 PB - GUS CY - Pfinztal (Berghausen) AN - OPUS4-1819 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brink, Arne A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert ED - Balageas, D. T1 - Application of quantitative impulse thermography for structural evaluation in civil engineering - comparison of experimental results and numerical simulations T2 - 6th International Conference on Quantitative InfraRed Thermography ; 6th QIRT '02 CY - Dubrovnik, Croatia DA - 2002-09-24 PY - 2002 SN - 953-631350-2 SP - 35 EP - 40 PB - FSB CY - Zagreb AN - OPUS4-1822 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Blümel, Peter T1 - Dangerous goods packaging - Approval and use T2 - 13th IAPRI Conference on Packaging CY - East Lansing, MI, USA DA - 2002-01-01 PY - 2002 SN - 1-587-16154-0 VL - 1 IS - 1 SP - 345 EP - 357 PB - CRC Press CY - Boca Raton AN - OPUS4-1783 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Brink, Arne A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert T1 - Anwendung der Impuls-Thermografie als quantitatives zerstörungsfreies Prüfverfahren im Bauwesen N2 - Zusammenfassung Die Impuls-Thermografie ist eine aktive Methode zur Strukturuntersuchung von Bauteilen. Im Rahmen eines von der DFG geförderten Projektes wird in Kooperation mit der TU Berlin an der Bundesanstalt für Materialforschung und -prüfung zur Zeit die mögliche Anwendung der Impuls-Thermografie als zerstörungsfreies Prüfverfahren im Bauwesen untersucht. Die Impuls-Thermografie soll zur Ortung von oberflächennahen Inhomogenitäten, bei denen es sich im Normalfall um Fehlstellen handelt, in typischen Bauteilen verwendet werden und nach Möglichkeit die Geometrie- sowie die Materialparameter der Inhomogenitäten quantitativ bestimmt werden. Messungen werden derart durchgeführt, dass Oberflächen mit einem geeigneten Heizstrahler erwärmt, die anschließenden Abkühlungsprozesse mit einer Infrarot-Kamera betrachtet und thermische Bilddaten (Thermogramme) aufgezeichnet werden. Der Hauptansatzpunkt für die quantitative Auswertung der Messdaten ist die Betrachtung von Temperatur-Zeit-Kurven (Transienten) des Abkühlungsprozesses über fehlerfreien und fehlerhaften Bereichen des Probekörpers. Zusätzlich werden auf Basis der Finiten-Differenzen-Methode numerische Simulationen durchgeführt. Quantitative Ergebnisse werden sowohl durch den Vergleich der experimentellen Daten mit den Simulationsrechnungen als auch durch eine Anpassung analytischer Funktionen an die Transienten erzielt. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Zerstörungsfreie Prüfung im Bauwesen (ZfPBau) KW - Impuls-Thermografie KW - Hohlstellen KW - Schichtablösungen KW - Beton PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v45/v45.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1824 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Kind, Thomas ED - Koppenjan, S. K. T1 - Application of impulse radar for non-destructive investigation of concrete structures N2 - The application of impulse radar for structural investigation of concrete elements has been increased during the last years related to technical developments, i. e. of high frequency antennas. In this paper, case studies will be presented related to the location of reinforcing bars, tendon ducts and repaired concrete areas in concrete bridges, anchors and dowels in concrete highways and delaminations of layered structures as they are used for non-ballasted railway tracks. It is shown that impulse radar can be applied in case of regular inspection and for searching the cause of damages but also for quality assessment in civil engineering. T2 - 9th GPR 2002 ; 9th International Conference on Ground Penetrating Radar CY - Santa Barbara, CA, USA DA - 2002-04-29 KW - Non-destructive testing KW - Radar KW - Polarisation KW - Civil engineering KW - Concrete KW - Reinforcement KW - Voids KW - Quality assurance PY - 2002 UR - http://cat.inist.fr/?aModele=afficheN&cpsidt=14182375 SN - 0-8194-4522-3 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 4758 SP - 382 EP - 387 PB - SPIE, the International Society for Optical Engineering CY - Bellingham, Wash. AN - OPUS4-1825 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Brink, Arne A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert ED - Binda, L. T1 - Transient thermography for non-destructive investigation of building structures in the near surface region T2 - RILEM TC 177-MDT Workshop on On-Site Control and Non-Destructive Evaluation of Masonry Structures CY - Mantova, Italy DA - 2001-11-12 KW - Non-destructive testing KW - Masonry KW - Concrete KW - Impulse thermography KW - Plaster KW - Laminates PY - 2003 SN - 2-912143-34-9 N1 - Serientitel: RILEM proceedings – Series title: RILEM proceedings IS - 26 SP - 251 EP - 261 PB - RILEM Publications CY - Bagneux, France AN - OPUS4-1829 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Kind, Thomas ED - Binda, L. T1 - Application of georadar for the determination of moisture content and distribution in masonry T2 - RILEM TC 177-MDT Workshop on On-Site Control and Non-Destructive Evaluation of Masonry Structures CY - Mantova, Italy DA - 2001-11-13 PY - 2003 SN - 2-912143-34-9 N1 - Serientitel: RILEM proceedings – Series title: RILEM proceedings IS - 26 SP - 227 EP - 238 PB - RILEM Publications CY - Bagneux, France AN - OPUS4-1830 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rabe, Torsten A1 - Rudert, Rainer A1 - Goebbels, Jürgen A1 - Harbich, Karl-Wolfram ED - Matsui, M. T1 - Evaluation of green components by nondestructive methods T2 - Improved Ceramics through New Measurements, Processing, and Standards Symposium ; 4th PAC RIM CY - Maui, HI, USA DA - 2001-11-04 PY - 2002 SN - 1-574-98147-1 SN - 1042-1122 N1 - Serientitel: Ceramic transactions – Series title: Ceramic transactions IS - 133 SP - 86 EP - 95 PB - American Ceramic Society CY - Westerville, Ohio AN - OPUS4-1837 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Meggyes, Tamás A1 - Tünnermeier, Torge ED - Simon, Franz-Georg T1 - Groundwater remediation using active and passive processes T2 - Workshop "In-situ Reactive Barriers versus Pump-and-Treat" CY - Berlin, Germany DA - 2001-10-18 PY - 2002 SN - 0-7277-3121-1 SP - 3 EP - 34 PB - Telford CY - London AN - OPUS4-1841 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Herter, Jürgen A1 - Spieker, N. ED - Casas, J. R. T1 - Interaction between Field Measurements and Laboratory Tests for a Reliable further Use of the Berlin Underground Viaducts T2 - 1st International Conference on Bridge Maintenance, Safety and Management ; 1st IABMAS '02 CY - Barcelona, Spain DA - 2002-07-14 KW - Fatigue safety KW - Field measurement KW - Laboratory test KW - Fatigue cracking KW - Bridge KW - Silent track KW - Rehabilitation PY - 2002 SN - 84-95999-05-6 SP - 101 EP - 102 PB - International Center for Numerical Methods in Engineering (CIMNE) CY - Barcelona AN - OPUS4-1810 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Goedecke, Thomas T1 - Selective Testing of Plastic Packagings for the Transport of Dangerous Liquids PY - 2002 SN - 1-587-16154-0 IS - 1 SP - 371 EP - 376 PB - CRC Press CY - Boca Raton AN - OPUS4-1779 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Rieck, C. A1 - Hillemeier, B. A1 - Krause, Martin T1 - Hohlstellenortung in Holzbalken mit dem Ultraschallverfahren N2 - Zusammenfassung Die Anwendung des Ultraschallecho-Verfahrens zur Hohlstellenortung in Holzbalken wird beschrieben. An Hand der Versuchsergebnisse wird der Einfluss der Anisotropie des Holzes auf die Messkopfanordnung und Schallgeschwindigkeit dargestellt. Mit der optimierten Messanordnung ist die erfolgreiche Detektierung von Nachbildungen von Minderdicken und Kernfäule möglich. Besonders klar sind Schäden in Faserrichtung (Kernfäulenachbildung) nachzuweisen. Die sehr guten Ergebnisse zeigen die Anwendbarkeit des Ultraschallecho-Verfahrens an Holz. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - ZfP an Holzbauteilen KW - Fehlstellen KW - Minderdicken KW - Ultraschallecho-Experimente an Probekörpern PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p32/p32.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1937 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hentschel, Manfred P. A1 - Lange, Axel A1 - Harbich, Karl-Wolfram A1 - Schors, Jörg A1 - Wald, Oliver T1 - X-ray diffraction and refraction topography of light weight materials T2 - Annual conference of the British Institute on Non-Destructive Testing ; NDT 2002 CY - Southport, England, UK DA - 2002-09-17 PY - 2002 SN - 0-903132-30-3 SP - 275 EP - 280 PB - British Institute of Non-Destructive Testing CY - Northampton AN - OPUS4-1938 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gohlke, Dirk A1 - Gieschler, Wolfgang A1 - Matthies, Klaus A1 - Haß, R. T1 - Konzipierung einer Tauchtechnik-Anlage für hohe Prüfempfindlichkeiten N2 - Zusammenfassung Die zunehmende Auslegung von Werkstoffen und Bauteilen bis dicht an ihre Leistungsgrenzen erfordert von Seiten der zerstörungsfreien Prüfung eine zunehmende Steigerung ihrer Nachweisempfindlichkeit sowie eine Verbesserung ihrer Analysemöglichkeiten. Um diesen Forderungen gerecht zu werden, wurde eine 7-achsige mit bürstenlosen (AC)-Servomotoren und linearen Servoverstärkern sowie ungetakteten Netzteilen ausgerüstete Tauchtechnik-Anlage aufgebaut, die sich durch eine hohe Störfreiheit auszeichnet und so sehr hohe Prüfempfindlichkeiten gestattet. Berichtet wird über das Konzept sowie über eine neue zukunftweisende modular aufgebaute Steuer- und Auswerte-Software. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p12/p12.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1854 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Matthies, Klaus A1 - Ernst, Hardy A1 - Gieschler, Wolfgang T1 - Bestimmung des mikroskopischen Reinheitsgrades von Stählen mit Ultraschall N2 - Zusammenfassung Die Ultraschallprüftechniken zur Bestimmung des Reinheitsgrades von Stählen gewinnen immer mehr an Bedeutung, erkennbar u.a. auch an dem vor kurzem erschienenen Stahl-Eisen-Prüfblatt SEP 1927 "Ultraschall-Tauchtechnik-Prüfung zur Bestimmung des makroskopischen Reinheitsgrades von gewalzten oder geschmiedeten Stäben aus Stahl". Muss aber der mikroskopische Reinheitsgrad bestimmt werden, so müssen die hier vorgeschlagenen Prüftechniken versagen, da die Ultraschallprüfung als integrales Verfahren alle Reflektoren, die sich innerhalb eines Schallbündels befinden, erfasst und diese als einen entsprechend großen Reflektor darstellt. Daher bietet sich als Lösung - wenn überhaupt - nur die Verwendung von stark fokussierten, hochfrequenten Prüfköpfen an. Die durchgeführten Messungen haben gezeigt, dass es durchaus möglich ist, mit einer geeigneten Ultraschall-Messtechnik den mikroskopischen Reinheitsgrad von Stählen zu bestimmen. Die erzielbare Genauigkeit hängt aber im Wesentlichen davon ab, wie hoch die Anzahl der Einschlüsse pro Volumenanteil ist, also letztendlich vom Schallbündeldurchmesser. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p22/p22.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1855 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rehfeldt, T. A1 - Matthies, Klaus A1 - Wüstenberg, Hermann A1 - Schreiber, K. T1 - Einflüsse von gekrümmten Bauteiloberflächen auf fokussierte Schallfelder und ihre Konsequenzen für die Prüfpraxis N2 - Zusammenfassung In dieser Arbeit wurden Schallfelder von fokussierenden Prüfköpfen beim Einschallen über gekrümmte Oberflächen in einer Tauchtechnikanlage ausgemessen. Basierend auf diesen Messungen wurde ein im Vergleich zu exakten Schallfeldberechnungen einfaches, leicht handhabbares Näherungsmodell entwickelt, mit dessen Hilfe die Ausdehnung des Fokusbereiches fokussierender Prüfköpfe beim Einschallen in gekrümmte Bauteiloberflächen beschrieben und somit eine Empfindlichkeitskorrektur durchgeführt werden kann. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p03/p03.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1856 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Kelm, Jürgen A1 - Fritsch, Sebastian T1 - Kontrolle der Kautschukvulkanisation im Werkzeug mit Ultraschall N2 - Zusammenfassung In diesem Beitrag wird zunächst die für die on-line Prozesskontrolle an duroplastischen Formmassen entwickelte Ultraschallmesstechnik vorgestellt. Die Methode basiert auf der Durchschallung des vernetzenden Materials mit Hilfe von in das Werkzeug integrierten druck- und temperaturfesten 4 MHz-Ultraschallsensoren. Die Auswertung von Schalllaufzeit und Signalamplitude erfolgt vollautomatisch und dient der Berechnung von Schallgeschwindigkeit und -dämpfung. Beide Größen repräsentieren die änderung der mechanischen Eigenschaften infolge der Vernetzungsreaktion. Durch Anwendung auf vulkanisierende Materialien sollte die Anwendbarkeit der bewährten Methode erweitert werden. Im Ergebnis wird gezeigt, dass die Größe des Messeffekts von der Menge an Vernetzer (Schwefelkonzentration) abhängt. Bei ausreichend hohem Vernetzungsgrad zeigt die Ultraschallgeschwindigkeit signifikante, gut auswertbare Resultate, die den Ablauf der Vulkanisation on-line zu verfolgen gestatten. Ein Vergleich mit Vulkameterkurven zeigt große ähnlichkeiten und berechtigt zu der Hoffnung, dass die Methode industriellen Einsatz finden kann. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Prozesskontrolle KW - Vulkanisation KW - Vulkameter KW - Ultraschall KW - Schallgeschwindigkeit PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p21/p21.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1857 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mielentz, Frank A1 - Krause, Martin A1 - Wüstenberg, Hermann A1 - Wiggenhauser, Herbert ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - Development of a phased array transmitting equipment for ultrasonic testing of concrete T2 - 11th International Symposium on Nondestructive Characterization of Materials CY - Berlin, Germany DA - 2002-06-24 PY - 2002 SN - 3-540-40154-7 SP - 605 EP - 613 PB - Springer CY - Berlin AN - OPUS4-1859 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mielentz, Frank A1 - Krause, Martin A1 - Wüstenberg, Hermann T1 - Entwicklung einer Gruppenstrahler-Sendeeinheit für Ultraschalluntersuchungen von Betonbauteilen N2 - Zusammenfassung Die Ultraschall Phased-Array-Technik oder auch Gruppenstrahlertechnik wird erfolgreich in der zerstörungsfreien Werkstoffprüfung an Metallen und Kunststoffen eingesetzt. Mit dieser Technik kann durch zeitlich gesteuerte Anregung der einzelnen Wandlerelemente des Arrays das Schallbündel im Probekörper verschoben, geschwenkt und/oder fokussiert werden. Der für Beton anwendbare Frequenzbereich liegt in der Regel von 50 kHz bis 200 kHz. Die Erzeugung der notwendigen Verzögerungen der Sendespannungen für die Schallbündelsteuerung kann in diesem Frequenzbereich durch kommerziell erhältliche Komponenten der Rechnertechnik erreicht werden. Die Hardware-Entwicklung beschränkt sich somit nur auf die Leistungssendestufen und das Interface zwischen dem Steuerrechner und dem Leistungsteil. Die Phased-Array-Sendeapparatur besteht aus einem Steuerrechner mit eingebauten Timerbaugruppen und einem externen Leistungsteil mit 10 eingebauten Sendern für die Ultraschallprüfköpfe. Als Kompromiss zwischen Schaltungsaufwand und bestmöglicher Anregung werden z. Zt. Rechtecksendestufen mit einstellbarer Impulsbreite verwendet. Durch die variable Impulsbreite kann, je nach verwendeten Prüfköpfen, die Anregung optimiert werden. Orientierende Messungen wurden an einem 50 cm dicken Betonprobekörper mit einem Größtkorn von 8 mm durchgeführt. Die Möglichkeiten des Fokussierens und des Schwenkens des Schallbündels sind in Durchschallung überprüft worden. Es erfolgte danach ein Vergleich der Ergebnisse mit einer Modellrechnung auf Grundlage der Punktquellensynthese. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Ultraschall KW - Beton KW - Ultraschallsender KW - Phased-Array-Technik PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v44/v44.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1860 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Mc Hugh, Jarlath A1 - Bartusch, Jürgen A1 - Fengler, Petra T1 - Rheologische und akustische Bestimmung der Fließ-Härtungseigenschaften von Injektionsharzen N2 - Zusammenfassung Der Ausgangspunkt für diese Arbeiten ist eine in [1] beschriebene Ultraschall-(US)-Sensorik zur Aushärtungskontrolle. Sie wurde für rieselfähige Formmassen entwickelt [2,3]. Darauf aufbauend ist es das Ziel der vorliegenden Arbeit, die Voraussetzungen für den Einsatz dieser Sensorik beim Harzinjektionsverfahren zu schaffen und ihre Kalibrierung durch rheologische und DSC-Messungen zu ermöglichen. Der erste Teil des Beitrages beschäftigt sich mit dem technologischen Ablauf des Harzinjektionsverfahren und den Einsatzmöglichkeiten der US-Sensorik bei dieser Technologie. Ergebnisse von Schallgeschwindigkeits- und Dämpfungsmessungen für EP-Harze werden vorgestellt. Im zweiten Teil wird auf das Kalibrieren der US-Sensorik für den Verarbeiter eingegangen. Es kann mittels der bisherigen Prozessführung oder durch Vergleich mit den Ergebnissen anderer Mess-Verfahren wie Rheometer- oder Differential-Scanning-Calerometry-(DSC)-Messungen erfolgen. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Ultraschall KW - Harzinjektionsverfahren KW - RTM KW - Prozesskontrolle KW - Aushärtung PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v51/v51.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1913 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bullinger, O. A1 - Harbich, Karl-Wolfram A1 - Busse, G. ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - X-Ray refraction topography of impact damage of CFRP laminates T2 - 11th International Symposium on Nondestructive Characterization of Materials CY - Berlin, Germany DA - 2002-06-24 PY - 2003 SN - 3-540-40154-7 SP - 177 EP - 184 PB - Springer CY - Berlin AN - OPUS4-1915 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bullinger, O. A1 - Harbich, Karl-Wolfram A1 - Busse, G. T1 - X-Ray Refraction on composite materials T2 - Materials Week 2001 ; International Congress on Advanced Materials, Their Processes and Applications ; Trade fair : Materialica CY - Munich, Germany DA - 2001-10-01 PY - 2001 SN - 3-88355-302-6 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-1918 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hünecke, Joachim A1 - Bomas, H. A1 - Laue, S. A1 - Schöne, Dieter T1 - Observation and Simulation of Short Crack Behaviour in a Low Carbon Steel under Constant Amplitude Loading T2 - Materials Week 2001 ; International Congress on Advanced Materials, Their Processes and Applications ; Trade fair: Materialica CY - Munich, Germany DA - 2001-10-01 PY - 2001 SN - 3-88355-302-6 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-1905 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hünecke, Joachim A1 - Schöne, Dieter T1 - Simulation of the Short Crack Behaviour of the Low Carbon Steel SAE 1017 under Fatigue Loading T2 - Materials Week 2002 ; European Congress on Advanced Materials, their Processes and Applications ; 6th International Conference on Joining Ceramics, Glass and Metal CY - Munich, Germany DA - 2002-09-30 PY - 2002 SN - 3-88355-314-X PB - Werkstoff-Informationsges. AN - OPUS4-1907 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Banach, Ulrich A1 - Hübert, Thomas ED - Baselt, J. P. T1 - Qualitätssicherung bei der Prüfung von Gassensoren T2 - 5. Dresdner Sensor-Symposium CY - Dresden, Deutschland DA - 2001-12-10 PY - 2002 SN - 3-935712-71-5 N1 - Serientitel: Dresdner Beiträge zur Sensorik – Series title: Dresdner Beiträge zur Sensorik IS - 16 SP - 197 EP - 200 PB - w.e.b. Universitätsverlag CY - Dresden AN - OPUS4-1908 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schröder, Hartmut A1 - Bahr, Horst A1 - Lorenz, Edelgard A1 - Kneip, Gisela A1 - Kunze, Ines A1 - Zeynalov, Eldar T1 - Resistance of polyolefin geosynthetics to oxidationa new accelarated test working at elevated oxygen pressure PY - 2002 SN - 90-5809-529-0 N1 - Geburtsname von Kunze, Ines: Schmücking, I. - Birth name of Kunze, Ines: Schmücking, I. VL - 4 SP - 1455 EP - 1458 PB - Balkema CY - Lisse AN - OPUS4-1901 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller-Rochholz, J. A1 - Bronstein, Z. A1 - Schröder, Hartmut A1 - Rybak, Thomas A1 - Zeynalov, Eldar A1 - v. Maubeuge, K. P. ED - Delmas, P. T1 - Long-term behaviour of geosynthetic drains - excavations on landfills after up to 12 years service T2 - 7th International Conference on Geosynthetics (ICG) CY - Nice, France DA - 2002-09-22 PY - 2002 SN - 90-5809-525-8 VL - 2 SP - 565 EP - 568 PB - Balkema CY - Lisse AN - OPUS4-1902 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Harbich, Karl-Wolfram A1 - Hentschel, Manfred P. A1 - Ivers, Heinz A1 - Rudolph, Hans-Volker A1 - Trappe, Volker A1 - Niebergall, Ute T1 - Mikroriss-Charakterisierung mittels Röntgen-Refraktions-Topographie N2 - Einleitung Bei der Detektion von Mikrorissen und der Charakterisierung spezifischer Schädigungen von Polymer- und Kompositwerkstoffen kommt es neben quantitativen Bewertungen auch auf die Analyse von orientierungsabhängigen Struktureffekten an. Am Beispiel typischer Vertreter ausgewählter Materialien (PP/PE, CFK) wird dargestellt, inwieweit das Potential der Röntgen-Refraktions-Topographie vorteilhaft zur umfassenden Materialcharakterisierung genutzt werden kann. Die korrosiven Eigenschaften nichtmetallischer Werkstoffe werden maßgeblich vom mikrostrukturellen Aufbau der verwendeten Materialien bestimmt. Typische Versagens-mechanismen von Faser-Kompositen sind neben der Faserenthaftung vor allem durch Mikrorisse gekennzeichnet, die sich teils parallel, teils senkrecht zu den Fasern in der Matrix ausbreiten. Eine wichtige Anwendung der Röntgen-Refraktions-Topographie umfaßt die orientierungsselektive Detektion von Mikroriß-Oberflächen. Die Nachweisgrenze derartiger Schädigungen erstreckt sich bis zum Nanometerbereich. Definiert herbeigeführte Ermüdungsschäden an Kompositmaterialien lassen sich mit dieser Methode ausgezeichnet erfassen und gestatten eine quantitative Korrelation zu mechanischen Kenngrößen. Mittels schrittweiser Probenabtastung und der ortskorrelierten Speicherung von simultan erfassten Refraktions- bzw. Absorptionszählraten wird ein zweidimensionales Röntgen-Refraktions-Topogramm rekonstruiert, das u.a. die präzise Information der integralen Rissdichte enthält. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p18/p18.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1879 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hübner, Wolfgang A1 - Pyzalla, A. T1 - Friction and wear behaviour of stainless steels in liquid hydrogen T2 - 14th World Conference on Energetic Hydrogen ; 14th World Hydrogen Energy Conference ; 14e Conférence Mondiale de l'Hydrogène Énergétique CY - Montréal, Canada DA - 2002-06-09 PY - 2002 SN - 2-9214505-60-1 PB - Canadian Hydrogen Association CY - Montreal AN - OPUS4-1868 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hübner, Wolfgang ED - Bartz, Wilfried J. T1 - Tribological Behaviour of Steels at Low Temperatures T2 - 13th International Colloquium Tribology CY - Ostfildern, Germany DA - 2002-01-15 PY - 2002 SN - 3-924813-48-5 VL - 2 SP - 1277 EP - 1281 PB - Technische Akademie Esslingen CY - Ostfildern AN - OPUS4-1869 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Chládek, Jirí A1 - Müller, Ralf A1 - Weh, Lothar A1 - Reinsch, Stefan T1 - Surface Crystallisation Patterns Caused by Vickers Indentation T2 - Proceedings of workshop 2002 ; 10th Annual University-wide Seminar Workshop 2002 CY - Prague, Czech Republic DA - 2002-02-11 PY - 2002 SN - 80-01-02511-X VL - 6A SP - 610 EP - 611 PB - Czech Technical University CY - Prague AN - OPUS4-1870 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fomine, Pavel A1 - Mitropetros, Constantinos A1 - Hieronymus, Hartmut ED - Roy, G. D. T1 - Bubble ignition in chemically active heterogeneous systems T2 - International Colloquium on Advances in Confined Detonations CY - Moscow, Russia DA - 2002-07-02 PY - 2002 SN - 5-945880-08-6 SP - 167 EP - 170 PB - Torus Press CY - Moskva AN - OPUS4-1974 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Wiggenhauser, Herbert A1 - Krieger, J. T1 - NDE of a Post Tensioned Concrete Bridge Girder Using Ultrasonic Pulse Echo and Impact Echo T2 - 5th Structural Materials Technology NDT Conference CY - Cincinnati, OH, USA DA - 2002-09-10 PY - 2002 SN - 1-571-17094-4 VL - 5 SP - 386 EP - 395 PB - American Society for Nondestructive Testing CY - Columbus, Ohio AN - OPUS4-1978 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Streicher, Doreen A1 - Kroggel, O. A1 - Schickert, M. A1 - Müller, W. T1 - Ultraschallecho an Beton - Definition von Kenngrößen zur Beurteilung der Leistungsfähigkeit von bildgebenden Verfahren N2 - Zusammenfassung Durch die Entwicklung verschiedener Longitudinal- und Transversalwellenprüfköpfe, der variierenden Prüfkopfanordnung und -anzahl in Arrays sowie der verwendeten Erregerfrequenzen stehen derzeit mehrere Ultraschall-Verfahren für Untersuchungen an Betonbauteilen im Echobetrieb zur Verfügung. Darüber hinaus können verschiedene Verfahren für die Auswertung der Messergebnisse, u. a. SAFT-Rekonstruktionsberech-nungen (Synthetic Aperture Focusing Technique), genutzt werden. Um die Leistungsfähigkeit der Verfahren spezifizieren und auch vergleichen zu können, sind geeignete Kenngrößen erforderlich. Zu diesem Zweck wurden vorerst drei Kenngröße - das Signal/Rausch-Verhältnis s, die Laterale Auflösung D x und die Gleichmäßigkeit der Abbildung g - definiert und auf Untersuchungsergebnisse zu einem bekannten Prüfobjekt angewendet. Dabei handelt es sich um eine Bohrung in einem Betontestkörper aus Normalbeton B 35, die parallel zur Messfläche eingebracht wurde. In diesem Beitrag werden die Definitionen und die am Beispiel der Bohrung ermittelten Kenngrößen vorgestellt. Es soll gezeigt werden, dass anhand der vorgestellten Definitionen die Kenngrößen für jedes Verfahren prinzipiell ermittelt werden können. Eine Beurteilung der Werte kann derzeit noch nicht erfolgen. Dazu müssen sich Untersuchungen an weiteren bekannten Objekten anschließen, u. a. auch an gezielt konzipierten Testkörpern, an denen die Einflüsse ausgewählter Objekteigenschaften auf die verfahrensabhängigen Kenngrößen untersucht werden sollen. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p31/p31.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1979 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Redmer, Bernhard A1 - Warrikhoff, A. A1 - Ewert, Uwe T1 - Miniatur-Röntgenröhre für die mobile Rohrprüfung N2 - Zusammenfassung Der Prototyp einer Flachröntgenröhre mit einer maximalen Röntgenenergie von 240kV (600W) und einer Brennfleckgröße von 0,4 * 0,4 mm nach DIN EN 12543 wird vorgestellt. Das Design dieser Flachröntgenröhre mit geringer Aufbauhöhe ist in Metall-Keramik-Technik ausgeführt. Die Beschleunigungsstrecke Katode-Anode ist senkrecht zur Haubenachse ausgeführt. Die Röhre ist als bipolares System aufgebaut. Kleine Durchmesser der Hochspannungskabel verringern das Gewicht und resultierende Kraftmomente bei der manuellen Manipulation sowie beim Verfahren in einem mechanisierten System. Der Targetwinkel beträgt 6° und bewirkt eine höhere Brillianz der Röntgenstrahlung. Die Geometrie des Strahlenaustrittsfensters (Emissionsfenster) ist in Fächerstrahlgeometrie zur tomografischen Prüfung ausgelegt. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v02/v02.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1994 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jung, C. M. A1 - Heintz, A. A1 - Kraus, Werner A1 - Wunderlich, G. A1 - Leibnitz, Peter A1 - Pietzsch, H.-J. A1 - Kropp, J. A1 - Deussen, A. A1 - Spies, H. ED - Marino, N. T1 - Technetium- and Rhenium-Labelled Fatty Acids as Model Compounds for Myocardial Metabolism Imaging N2 - In an attempt to develop new technetium-based radiopharmaceuticals for the non-invasive diagnosis of oxidative myocardial metabolism, rhenium model compounds according to the ‚3+1' mixed ligand approach as well as the organometallic tricarbonyl-design were synthesized. The geometrical impact of different chelates on the integrity of the fatty acid head structure was determined by single crystal X-ray analyses. To evaluate the diagnostic potential of the analogous Technetium-99m compounds, fatty acid complexes of the ‚3+1' mixed ligand type were prepared on n.c.a.-level and studied in the isolated constant-flow-perfused guinea pig heart model; compared to established [123I]Iodine-labelled fatty acid radiotracers, the tested Technetium-99m derivatives showed a specific, however significantly lower myocardial extraction rate. T2 - 6th International Symposium on Technetium in Chemistry and Nuclear Medicine CY - Bressanone, Italy DA - 2002-09-04 KW - Fatty acids KW - Metabolism KW - Myocardial Imaging KW - Rhenium KW - Technetium-99m PY - 2002 UR - http://www.fzd.de/db/!Publications?pSelYear=2002&pLang=en&pNid=0&pSelWithSubmitted=0&pSelSort=TITEL&pSelPublForm=4&pSelPage=2 SN - 88-86281-73-0 N1 - Serientitel: Technetium, rhenium and other metals in chemistry and nuclear medicine – Series title: Technetium, rhenium and other metals in chemistry and nuclear medicine VL - 6 IS - 6 SP - 443 EP - 445 PB - SGEditoriali CY - Padova AN - OPUS4-1999 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Samadurau, Uladzimir ED - Ablamejko, S. V. T1 - Application of statistical linearization technique for dynamic image reconstruction in process tomography T2 - 3 Mezdunarodnaja Konferencija Cifrovaja Obrabotka Informacii i Upravlenie v Crezvycajnych Situacijach ; 3rd International Conference Digital Information Processing and Control in Extreme Situations CY - Minsk, Republic of Belarus DA - 2002-05-28 PY - 2002 SN - 985-645381-X VL - 2 SP - 133 EP - 139 PB - Institut Techniceskoj Kibernetiki CY - Minsk AN - OPUS4-2004 LA - rus AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Christina A1 - Ewert, Uwe A1 - Rosenthal, Martina A1 - Völker, J. A1 - Schafer, Lloyd T1 - Das Basisanliegen von Zuverlässigkeitsuntersuchungen und eine Momentaufnahme im internationalen Geschehen N2 - Das Basisanliegen - Einleitung Mit der zunehmenden Zahl akkreditierter ZfP-Firmen und zunehmender Anwendung risikobasierender Konzepte ergibt sich die Notwendigkeit, internationale Standards wie die DIN EN ISO 17025 und darüber hinausgehende Richtlinien bei der Verfahrensauswahl in der ZfP zu berücksichtigen. Dieser Aufsatz soll aufzeigen, welche internationalen Aktivitäten gegenwärtig für die Zuverlässigkeitsbetrachtungen von Bedeutung sind (siehe auch [1]). In Übereinstimmung mit den Vereinbarungen und Definitionen der European-American Workshops zur Zuverlässigkeit [2, 3] gilt: Das Basisanliegen der Zuverlässigkeitsuntersuchungen beliebiger diagnostischer Systeme besteht darin, den Grad festzustellen mit dem das Prüfsystem in der Lage ist, seinen vorgesehenen Zweck zu erfüllen. Im Falle der ZfP besteht dieser Zweck zumeist in der Aufgabe, Bauteildefekte aufzufinden und zu beschreiben bzw. die Defektfreiheit von Bauteilen zu bestätigen, sowie Wanddicken zu messen oder Material zu charakterisieren. Das Basisanliegen der Zuverlässigkeitsuntersuchungen findet seinen Niederschlag bei folgenden international relevanten Aktivitäten: neue ISO 17025 als Notwendigkeit mit variablen Möglichkeiten der Verfahrensvalidierung als Kettenglied in RBLM (Risk Based Life Time Management) (r) EPERC-Initiative CEN/TC138/WG9 "Qualifizierung von ZfP-Verfahren" Six-Sigma Strategie: als notwendiger Bestandteil ASNT-Initiative: Standing Committee on NDE Reliability: als Arbeitspaket Produkthaftung: als notwendige Voraussetzung für die Handhabung T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v29/v29.htm SN - 3-931381-39-0 N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-2010 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Christina A1 - Ewert, Uwe A1 - Rosenthal, Martina A1 - Bär, Sylke A1 - Schafer, Lloyd A1 - Völker, J. A1 - Wilrich, Peter-Th. T1 - Current status in the area of reliability of non-destructive testing and demining: Experience in Europe and USA T2 - Reliability and Diagnostics of Transport Structures and Means, Pardubice - Czech Republic CY - Pardubitz, Tschechische Republik DA - 2002-09-26 KW - Reliability of NDE Systems KW - Performance Demonstration KW - Essential Parameters KW - European Standards KW - Radiographic Testing KW - Film Digitalization KW - Austenitic Tube Welds KW - ROC KW - POD PY - 2002 SN - 80-7194464-5 SP - 1 EP - 14(?) PB - Univ. CY - Pardubice AN - OPUS4-2011 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klyszcz, Andreas A1 - Shimamura, Aki A1 - Hübert, Thomas T1 - Nanostrukturierte Multifunktionsschichten mittels Sol-Gel Technologie T2 - Materials Week 2002 ; European Congress on Advanced Materials, their Processes and Applications ; 6th International Conference on Joining Ceramics, Glass and Metal CY - Munich, Germany DA - 2002-09-30 PY - 2002 SN - 3-88355-314-X PB - Werkstoff-Informationsges. AN - OPUS4-2026 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Frei, Vivian A1 - Pirskawetz, Stephan A1 - Thiele, Marc A1 - Rogge, Andreas T1 - Ermüdungsverhalten von Beton für unterschiedliche Probekörpergeometrien N2 - Die zunehmende Anwendung hochfesten Betons in ermüdungsbelasteten Bauwerken, herausfordernde Belastungsszenarien im Bereich von On- und Offshore Windenergieanlagen bezüglich sehr hoher Lastwechselzahlen sowie das gleichzeitige Streben nach energie- und ressourcenschonendem Bauen stellen die Bemessung von Beton gegen Ermüdung vor neue Aufgaben. Eine Vielzahl von Studien beschreibt bereits die Auswirkung von Einflussfaktoren wie Mischungszusammensetzung, Feuchte, Probekörpergröße oder Belastungsart auf die Ermüdungsfestigkeit und den Ermüdungsprozess. Aufgrund der unterschiedlichen Geometrien und Mischungen der in den verschiedenen Studien verwendeten Proben sind die Auswirkungen der Einflussfaktoren jedoch kaum miteinander vergleichbar. In dem vom Bundesministerium für Wirtschaft und Klimaschutz (BMWK) geförderten Verbundprojekt WinConFat wurden deshalb verschiedene Einflussfaktoren gezielt an Proben mit einheitlichen Mischungen untersucht. Das durch die Bundesanstalt für Materialforschung und -prüfung (BAM) bearbeitete Teilprojekt fokussierte sich auf den „Einfluss der Probengeometrie und -größe auf die Ermüdung von Beton“. Neben der Erhebung von Daten zur Ermüdungsfestigkeit wurde der Ermüdungsprozess mit zerstörungsfreien Prüf- und Messmethoden untersucht. Diese Prüfmethoden wurden auch hinsichtlich ihrer Anwendbarkeit zur Erfassung der ermüdungsbedingten Schädigungsentwicklung an Betonbauwerken im Rahmen von Monitoringkonzepten bewertet. Untersucht wurden die Ermüdungsfestigkeiten und der Ermüdungsprozess an Zylindern mit drei unterschiedlichen Betonmischungen sowie unterschiedlicher Größe und Schlankheit. Die Ergebnisse dieser Untersuchungen werden im Folgenden vorgestellt und diskutiert. KW - Ermüdung KW - Hochfester Beton KW - Probengröße KW - Probengeometrie PY - 2024 VL - 644 SP - 1 EP - 135 PB - Beuth CY - Berlin AN - OPUS4-59647 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schnell, A. A1 - Rübner, Katrin A1 - Vöge, M. A1 - Ludwig, H.-M. ED - Thomé-Kozmiensky, K. J. ED - Thiel, S. ED - Thomé-Kozmiensky, E. ED - Friedrich, B. ED - Pretz, T. ED - Quicker, P. ED - Senk, D. G. ED - Wortruba, H. T1 - Halbtechnische Herstellung von Recycling-Granulaten aus Mauerwerkbruch-Ton-Mischungen und ihre Anwendung in Leichtbeton N2 - Das Projektziel bestand in der Entwicklung eines Verfahrens zur Herstellung von leichter Gesteinskörnung für Beton und Mörtel aus ziegelhaltigen Bau- und Abbruchabfällen durch thermische Porosierung. Hierzu erfolgte nach einem mehrstufigen mechanischen Prozess eine thermische Stabilisierung der RC-Granulate (RCG). Nach Laborversuchen wurden RCG im halbtechnischen Maßstab hergestellt. Als Ausgangsmaterial dienten Mauerwerkbruch bzw. Gemische aus Mauerwerkbruch und Ton. Dabei wurde die gesamte Prozesskette vom Granulieren der Ausgangsmehle bis zur thermischen Behandlung im Drehrohrofen in einem Produktionsschritt dargestellt. Die erzeugten RCG sind mit Rohdichten zwischen 780 und 1800 kg/m³ leichte Gesteinskörnungen. In den Applikationsuntersuchungen erfolgte eine vollständige Verwertung des gesamten beim Brennprozess entstehenden Materials, von den Körnungen kleiner 2 mm für leichte Steinergänzungsmörtel (Leichtmörtel) bis zu den Körnungen 2-8 mm für Leichtbeton. Die RCG und die damit erzeugten Betone wurden umfangreich charakterisiert. Die Leichtbetone mit RCG wurden abschließend in Applikationsversuchen eingesetzt. KW - Bauschutt KW - Mauerwerkbruch KW - Leichtbeton KW - Stoffliches Recycling KW - RC-Leichtgranulate KW - Leichte Gesteinskörnungen PY - 2017 SN - 978-3-944310-35-0 VL - 4 SP - 329 EP - 342 PB - TK Verlag Karl Thomé-Kozmiensky CY - Neuruppin ET - 1 AN - OPUS4-44116 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Huismann, Sven A1 - Weise, Frank A1 - Meng, Birgit A1 - Schneider, U. ED - Kodur, V. ED - Franssen, J.-M. T1 - Influence of polypropylene fibres on the thermal strain of high strength concrete at high temperatures T2 - 6th International conference "Structures in fire" CY - East Lansing, Michigan, USA DA - 2010-06-02 KW - High performance concrete KW - High temperatures KW - Polypropylene fibres KW - Thermal strain KW - Acoustic emission KW - Ultrasound PY - 2010 SN - 978-1-60595-027-3 SP - 719 EP - 726 PB - DEStech Publications, Inc. CY - Lancaster, PA, USA AN - OPUS4-21563 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pistol, Klaus A1 - Weise, Frank T1 - Novel investigation of the behaviour of polypropylene fibres in high strength concrete at high temperatures T2 - 8th fib International PhD symposium in civil engineering CY - Lyngby, Denmark DA - 2010-06-20 KW - Polypropylene fibres KW - Explosive spalling KW - High strength concrete KW - Computer tomography KW - Scanning electron microscopy PY - 2010 SN - 9788778773012 SP - 407 EP - 412 AN - OPUS4-21630 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Proske, T. A1 - Kühne, Hans-Carsten ED - Khayat, K.H. ED - Feys, D. T1 - Segregation of coarse aggregates in self-compacting concrete N2 - A major requirement on self-compacting concrete (SCC) is the resistance to any kind of separation. In the presented studies the segregation behavior of aggregates was analyzed systematically. The rheology of selfcompacting mortars was dealt with at first. Following, the segregation of particles of different size, shape and density in various mortars was examined. The aim was to find an analytical relation to estimate the risk of sedimentation, using the characteristics of the particles and those of the mortars. The classification of the aggregates according to their potential segregation is rather simple. But the description of the segregation resistance of the mortar is much more difficult. It is not possible to evaluate a mortar solely based on the rheological properties. The mixture composition must always be considered as well. Tests on concrete samples were conducted additionally to determine the influence of the overall system of SCC on the sedimentation of the aggregates. T2 - SCC2010 - Design, production and placement of self-consolidating concrete CY - Montreal, Canada DA - 2010-09-26 KW - Rheology KW - Segregation KW - Static yield stress KW - Mixture proportioning KW - Aggregates KW - Rheologie KW - Sedimentation KW - Statische Fließgrenze KW - Mischungszusammensetzung KW - Gesteinskörnung PY - 2010 SN - 978-90-481-9663-0 DO - https://doi.org/10.1007/978-90-481-9664-7_10 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 1 IS - 3 SP - 113 EP - 125 PB - Springer AN - OPUS4-22298 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vasilic, Ksenija A1 - Roussel, N. A1 - Meng, Birgit A1 - Kühne, Hans-Carsten ED - Khayat, K.H. ED - Feys, D. T1 - Computational modeling of SCC flow through reinforced sections N2 - Computational modeling of fresh SCC flow is a comprehensive and time consuming task. The computational time is additionally increased when simulating casting of reinforced sections, where each single reinforcement bar has to be modeled. In order to deal with this issue and to decrease the computational time, an innovative approach of treating a reinforcement network as a porous medium is applied. This contribution presents the model for concrete flow through reinforced sections, based on Computational Fluid Dynamics (CFD), coupling a single-phase flow model for SCC and a continuum macroscopic model for porous medium. In the last part of this paper, numerical simulations are compared with experimental results obtained on model fluids. T2 - SCC2010 - Design, production and placement of self-consolidating concrete CY - Montreal, Canada DA - 2010-09-26 PY - 2010 SN - 978-90-481-9663-0 DO - https://doi.org/10.1007/978-90-481-9664-7_16 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 1 IS - 5 SP - 187 EP - 195 PB - Springer AN - OPUS4-22277 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Herbst, Tristan A1 - Hauer, B. A1 - Rübner, Katrin A1 - Meng, Birgit ED - Teipel, U. T1 - Wege zur Bewertung der Einsatzmöglichkeit sekundärer Gesteinskörnungen in Beton T2 - Symposium Rohstoffeffizienz und Rohstoffinnovationen CY - Nürnberg, Deutschland DA - 2010-02-04 KW - Gesteinskörnung KW - Beton KW - Nachhaltigkeit KW - Bewertung KW - Einsatzpotenzial PY - 2010 SN - 978-3-8396-0097-9 SP - 171 EP - 191 PB - Fraunhofer IRB Verl. AN - OPUS4-22952 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Herbst, Tristan A1 - Hauer, B. A1 - Rübner, Katrin A1 - Meng, Birgit T1 - Einsatzpotentzial und nachhaltige Verwertung von Hausmüllverbrennungsaschen als Gesteinskörnungen im Beton T2 - GDCh-Fachtagung Bauchemie 2009 CY - Freiberg, Deutschland DA - 2009-10-08 KW - Sekundärrohstoffe KW - Müllverbrennungsaschen KW - Sekundäre Gesteinskörnung PY - 2009 SN - 978-3-936028-61-4 VL - 41 SP - 237 EP - 240 AN - OPUS4-22951 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rübner, Katrin A1 - Rübner, J. A1 - Knölle, G. A1 - Tschritter, H. T1 - Porosität neuer anorganisch-organischer Nanoverbunde T2 - 3. Tagung Bauchemie CY - Würzburg, Deutschland DA - 2001-09-27 PY - 2002 SN - 3-936028-04-4 IS - 24 SP - 134 EP - 140 PB - GDCh CY - Frankfurt am Main AN - OPUS4-1318 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Schaurich, Dieter ED - Venzmer, H. T1 - Langzeituntersuchungen zum Austrocknungsverhalten des Hauptgesimses am Zeughaus Berlin T2 - 2. Altbau-Symposium anlässlich der Bautec 2002 CY - Berlin, Deutschland DA - 2002-02-08 PY - 2002 SN - 3-345-00802-5 N1 - Serientitel: Altbauinstandsetzung – Series title: Altbauinstandsetzung IS - 4 SP - 45 EP - 63 PB - Verl. Bauwesen CY - Berlin AN - OPUS4-1838 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Baeßler, Matthias A1 - Rücker, Werner ED - Popp, K. ED - Schiehlen, W. O. T1 - Track Settlement Due to Cyclic Loading with Low Minimum Pressure and Vibrations PY - 2003 SN - 3-540-43892-0 N1 - Serientitel: Lecture notes in applied mechanics – Series title: Lecture notes in applied mechanics VL - 6 IS - 6 SP - 337 EP - 356 PB - Springer CY - Berlin AN - OPUS4-1666 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Schaurich, Dieter T1 - A novel combination of NDT-methods for assessment of moisture conditions in structural members - a case study of the Berlin Zeughaus N2 - The moisture condition of solid brick and sandstone walls of historic buildings may be examined and monitored non-destructively and effectively by means of a novel combination of test methods which provide useful information on planning and monitoring rehabilitation and maintenance measures. Results are presented of an interdisciplinary research project of BAM on the moisture balance in the main cornice area of the Berlin Zeughaus. The main part of the investigations was carried out in 1994 and 1995. The quality of the prognosticated drying out process has been verified annually by means of measurements up to 2002. The depth-resolved local moisture determinations were accomplished with a microwave method developed by BAM. The moisture profiles revealed excessive moisture in the building element and reflected the slow drying process. Additionally, endoscopic examinations and chemical and physical analyses of miniature samples were carried out as well to help interpret the results. Hygrothermal data could be calculated from the quasi non-destructive tests and the parameters determined by the laboratory tests. Based on the 1995 measured moisture profile in the building element, the predicted simulation calculation indicated that a relatively long drying out process must be anticipated. Therefore the planned waterproofing sealing can at the earliest be applied to the surface of the building element in 2005. The good correlation of predicted and measured moisture profiles of the past years demonstrates the high quality of the new combination of test methods. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/v034/v034.htm SN - 3-931381-49-8 SP - 1 EP - 10(?) PB - DGZfP CY - Berlin AN - OPUS4-2599 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph A1 - Roßbach, W. T1 - Fugenfüllungen in Fahrbahndecken aus Beton - Aktueller Stand und Ausblick N2 - lm Jahre 2001 wurden einheitliche vertragliche, material- und konstruktionsspezifische Regelungen über die Ausführung, Prüfung und Abnahme von Fugenfüllungen in Verkehrsflächen eingeführt. Mit dem vorliegenden Beitrag soll die ZTV Fug-StB 01 vorgestellt und in das Technische Regelwerk zur Ausbildung von Betonfahrbahndecken im Bundesfernstraßenbau eingeordnet werden. T2 - Betonstraßentagung 2003 CY - Stuttgart, Deutschland DA - 2003-09-25 KW - Fugen KW - Fugenfüllung KW - Technisches Regelwerk KW - Forschungsaktivitäten PY - 2003 UR - http://www.cemsuisse.ch/index.html?node=225&page_id=266&l=2 SN - 3-7812-1607-1 SN - 0429-1816 N1 - Serientitel: Schriftenreihe der Arbeitsgruppe Betonstrassen / Forschungsgesellschaft für Straßen- und Verkehrswesen – Series title: Schriftenreihe der Arbeitsgruppe Betonstrassen / Forschungsgesellschaft für Straßen- und Verkehrswesen IS - 26 SP - 37 EP - 46 PB - Kirschbaum CY - Bonn AN - OPUS4-2685 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Köhnen, Jörg A1 - Weise, Frank A1 - Wiggenhauser, Herbert ED - Casas, J. R. T1 - Development of an autonomous system for the condition assessment of bridges T2 - 1st International Conference on Bridge Maintenance, Safety and Management ; 1st IABMAS '02 CY - Barcelona, Spain DA - 2002-07-14 KW - Non-destructive testing KW - Climbing Robot KW - Impact-Echo KW - Covermeter KW - Radar KW - Visual Inspection PY - 2002 SN - 84-95999-05-6 SP - 1 EP - 13 PB - International Center for Numerical Methods in Engineering (CIMNE) CY - Barcelona AN - OPUS4-2072 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Müller, Renate A1 - Recknagel, Christoph A1 - Rudolphi, Reinald A1 - Vater, Ernst-Joachim T1 - Thermodynamische Analyse japanischer Straßenbeläge zur Minderung des Heat-Island-Phänomens T2 - Fachtagung "Sonderkapitel aus dem Brücken- und Ingenieurbau" CY - Berlin, Deutschland DA - 2003-10-21 PY - 2003 SN - 3-86509-043-5 SP - 19 EP - 27 PB - Wirtschaftsverl. NW, Verl. für neue Wissenschaft CY - Bremerhaven AN - OPUS4-2730 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rücker, Werner A1 - Auersch, Lutz A1 - Baeßler, Matthias A1 - Knothe, K. A1 - Wu, Y. A1 - Gerstberger, Ulf A1 - Popp, K. A1 - Kruse, H. A1 - Savidis, S. ED - Popp, K. ED - Schiehlen, W. O. T1 - A comparative study of results from numerical track-subsoil calculations T2 - Colloquium 2002 CY - Stuttgart, Germany DA - 2002-03-13 PY - 2003 SN - 3-540-43892-0 N1 - Serientitel: Lecture notes in applied mechanics – Series title: Lecture notes in applied mechanics IS - 6 SP - 471 EP - 488 PB - Springer CY - Berlin AN - OPUS4-2358 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Köhnen, Jörg A1 - Weise, Frank A1 - Wiggenhauser, Herbert T1 - A climbing robot for the assessment of civil infrastructures T2 - IABSE symposium ; IABSE Symposium Towards a Better Built Environment - Innovation, Sustainability, Information Technology CY - Melbourne, Australia DA - 2002-09-11 KW - Non-destructive testing KW - Climbing Robot KW - Impact-Echo KW - Covermeter KW - Radar KW - Visual Inspection PY - 2002 SN - 3-85748-107-2 N1 - Serientitel: IABSE reports – Series title: IABSE reports IS - 86 SP - 294 EP - 295 PB - IABSE CY - Zürich AN - OPUS4-2071 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph T1 - Die ZTV Fug-StB - aktueller Stand bei Fugenfüllungen in Verkehrsflächen und Ausblick auf zukünftige Entwicklungen T2 - Fachtagung "Sonderkapitel aus dem Brücken- und Ingenieurbau" CY - Berlin, Deutschland DA - 2003-10-21 PY - 2003 SN - 3-86509-043-5 SP - 32 EP - 39 PB - Wirtschaftsverl. NW, Verl. für neue Wissenschaft CY - Bremerhaven AN - OPUS4-2732 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Redmer, Bernhard A1 - Likhatchev, A. A1 - Weise, Frank A1 - Ewert, Uwe T1 - Location of Reinforcement in Structures by Different Methods of Gamma-Radiography N2 - The quantitative measurement of kind, positions and diameters of steel reinforce ments in building constructions is a typical inspection problem in civil engineering. A classical solution is the combination of film radiography with the multi angle technique and graphical backprojection. New digital detectors reduce the exposure time and allow the application of stereo radiography and computed laminography as routine applications. The computed laminography allows fast and effectively the determination of the depth of reinforcements in concrete or masonry. A selected area of the steel re-bar structure is penetrated by gamma-rays from different angles of incidence (multi angle-technique) with a Co-60-source. Instead of a radiographic film phosphor imaging plates were used as a new digital medium for filmless radiography. A 3D-image of the measured region of interest is reconstructed from the digitised projections of a test block. The reconstruction is based on special tomosynthesis algorithms which need few projections only. Radiographic techniques were uses in completion to other techniques like radar, electromagnetic alternating field inspection to examine the structure of different buildings. Experiences of inspections of historical buildings, ancient marble structures and a bridge girder are presented where different levels of radiography were applied. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/v020/v020.htm SN - 3-931381-49-8 SP - 1(?) EP - 11(?) PB - DGZfP CY - Berlin AN - OPUS4-2779 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Patitz, G. A1 - Redmer, Bernhard A1 - Hübner, M. A1 - Haamkens, Frank A1 - Ewert, Uwe ED - Wittmann, F. H. ED - Gerdes, A. T1 - Kombination zerstörungsfreier Prüfverfahren zur Strukturaufklärung in antiken Baudenkmälern T2 - MSR-VI ; 6th International Conference on Materials Science and Restoration ; 6th Internationales Kolloquium Werkstoffwissenschaften und Bauinstandsetzen CY - Karlsruhe, Deutschland DA - 2003-09-16 KW - Antikes Baudenkmal KW - Strukturaufklärung KW - Lokalisierung von metallischen Einbauteilen und Hohlstellen KW - Kombinierter Einsatz zerstörungsfreier Prüfverfahren KW - Radar KW - Videoskopie KW - Radiografie PY - 2003 SN - 3-931681-76-9 IS - 6 SP - 359 EP - 370 PB - Aedificatio-Verl. CY - Freiburg AN - OPUS4-2817 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph ED - Partl, M. N. T1 - Performance - related testing of expansion joint systems in Germany T2 - 6th International RILEM Symposium on Performance Testing and Evaluation of Bituminous Materials (PTEBM-6) CY - Zurich, Switzerland DA - 2003-04-14 PY - 2003 SN - 2-912143-35-7 N1 - Serientitel: RILEM proceedings – Series title: RILEM proceedings IS - 28 SP - 603 EP - 610 PB - RILEM Publ. CY - Bagneux AN - OPUS4-2833 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühne, Hans-Carsten A1 - Maultzsch, Matthias A1 - Wolff, L. A1 - Meng, Birgit A1 - Raupach, M. ED - Maultzsch, M. T1 - Long-term performance of surface protection systems for concrete T2 - 11th International Congress on Polymers in Concrete (ICPIC `04) CY - Berlin, Germany DA - 2004-06-02 KW - Surface protection system KW - Concrete KW - Weathering KW - Water uptake KW - Freezethaw resistance KW - Chloride ingress KW - Carbonation KW - Hydrophobic treatment PY - 2004 SN - 3-00-013706-8 SP - 417 EP - 428 PB - BAM CY - Berlin AN - OPUS4-3602 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Rünzler, H. A1 - Weise, Frank ED - Grassegger-Schön, G. T1 - Untersuchungen von Farbfassungen an antiken Bauobjekten im Pergamonmuseum in Berlin T2 - 10. Tagung Natursteinsanierung CY - Stuttgart, Deutschland DA - 2004-03-19 PY - 2004 SN - 3-935643-12-8 SP - 119 EP - 126 PB - Siegl CY - München AN - OPUS4-3619 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Arndt, Detlef ED - Venzmer, H. T1 - Anwendungsmöglichkeiten der aktiven Infrarot-Thermografie im Bauwesen T2 - 11. Hanseatische Sanierungstage CY - Kühlungsborn, Deutschland DA - 2000-11-09 PY - 2000 SN - 3-345-00726-6 N1 - Serientitel: Schriftenreihe / Feuchte- und Altbausanierung e.V. – Series title: Schriftenreihe / Feuchte- und Altbausanierung e.V. IS - 11 PB - Verl. Bauwesen CY - Berlin AN - OPUS4-3348 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Redmer, Bernhard A1 - Patitz, G. ED - Stanke, G. T1 - Kombinierte Anwendung bildgebender zerstörungsfreier Prüfverfahren zur Strukturaufklärung antiker Baudenkmäler T2 - 11. Berliner Veranstaltung der internationalen EVA-Serie "Electronic Imaging & the Visual Arts - Elektronische Bildverarbeitung & Kunst, Kultur, Historie CY - Berlin, Deutschland DA - 2004-11-10 KW - Baudenkmäler KW - Strukturaufklärung KW - Zerstörungsfreie Prüfung KW - Videoskopie KW - Radar KW - Radiografie PY - 2004 SN - 3-9809212-2-0 SP - 57 EP - 67 PB - GFaI CY - Berlin AN - OPUS4-4826 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Redmer, Bernhard A1 - Weise, Frank A1 - Ewert, Uwe A1 - Patitz, G. T1 - Kombinierter Einsatz zerstörungsfreier Prüfverfahren zur Bauzustandsanalyse antiker Baudenkmäler im Pergamonmuseum Berlin T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Austria DA - 2004-05-17 KW - Zerstörungsfreie Prüfung KW - Radar KW - Videoskopie KW - Radiografie KW - Bauzustandsanalyse KW - Baudenkmal PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/p38/p38.htm SN - 3-931381-55-2 SP - 1(?) EP - 10(?) PB - DGZfP CY - Berlin AN - OPUS4-5224 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Patitz, G. A1 - Redmer, Bernhard A1 - Hübner, M. A1 - Ewert, Uwe ED - Grassegger-Schön, G. T1 - Kombination zerstörungsfreier Prüfverfahren zur Strukturaufklärung beim Markttor von Milet T2 - 10. Tagung Natursteinsanierung CY - Stuttgart, Deutschland DA - 2004-03-19 KW - Baudenkmäler KW - Strukturaufklärung KW - Zerstörungsfreie Prüfung KW - Radar KW - Radiografie PY - 2004 SN - 3-935643-12-8 SP - 109 EP - 118 PB - Siegl CY - München AN - OPUS4-4818 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Patitz, G. A1 - Redmer, Bernhard A1 - Hübner, M. A1 - Haamkens, Frank ED - Patitz, G. T1 - Kombination zerstörungsfreier Prüfverfahren zur Strukturaufklärung in antiken Baudenkmälern KW - Baudenkmäler KW - Strukturaufklärung KW - Zerstörungsfreie Prüfung KW - Videoskopie KW - Radar KW - Radiografie PY - 2004 SN - 3-8167-6443-6 N1 - Serientitel: Monudocthema – Series title: Monudocthema IS - 1 SP - 117 EP - 125 PB - Fraunhofer-IRB-Verl. CY - Stuttgart AN - OPUS4-4821 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Schaurich, Dieter ED - Patitz, G. T1 - Langzeituntersuchungen zum Austrocknungsverhalten des Hauptgesimses am Zeughaus Berlin KW - Baudenkmäler KW - Feuchteuntersuchung KW - Zerstörungsfreie Prüfung KW - Mikrowellenverfahren KW - Hygrothermische Simulation PY - 2004 SN - 3-8167-6443-6 N1 - Serientitel: Monudocthema – Series title: Monudocthema IS - 1 SP - 179 EP - 197 PB - Fraunhofer-IRB-Verl. CY - Stuttgart AN - OPUS4-4824 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bahlmann, Stefanie A1 - Rübner, Katrin A1 - Meng, Birgit T1 - Untersuchungen zur Verwertung industrieller Reststoffe als Primärrohstoffsubstitut in Mörtel und Beton T2 - GDCh-Fachtagung Bauchemie CY - Siegen, Deutschland DA - 2007-09-27 KW - Verwertungspotential KW - Industrielle Reststoffe KW - Filterrückstand KW - Papierasche KW - Biomasseasche KW - Edelstahlschlacke KW - Zumahlstoff KW - Betonzusatzstoff PY - 2007 SN - 3-936028-50-8 N1 - Geburtsname von Bahlmann, Stefanie: Ramolla, S. - Birth name of Bahlmann, Stefanie: Ramolla, S. VL - 37 SP - 237 EP - 244 AN - OPUS4-16095 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rübner, Katrin A1 - Haamkens, Frank A1 - Linde, O. T1 - Untersuchungen an Beton mit Hausmüllverbrennungsasche als Gesteinskörnung T2 - GDCh-Fachtagung Bauchemie CY - Siegen, Germany DA - 27.09.2007 KW - Müllverbrennungsasche KW - Reststoffe KW - Gesteinskörnung KW - Beton PY - 2007 SN - 3-936028-50-8 VL - 37 SP - 253 EP - 260 AN - OPUS4-16156 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Meng, Birgit ED - Jürgen Berger, ED - Fischer, Andreas ED - Stefan Himburg, ED - Michael Kramp, T1 - Einsatz innovativer Verfahren der Bauwerksdiagnose für die Bestandserfassung - ausgewählte Fallbeispiele T2 - Berliner Hoch- und Ingenieurbaukolloquium BHIK 07 "Bauen im Bestand - Innovationen aus Wissenschaft und Praxis" CY - Berlin, Deutschland DA - 2007-11-23 KW - Bauwerksdiagnose KW - Zerstörungsfreie Prüfung KW - Radar KW - Ultraschall KW - Röntgen-Computertomografie PY - 2007 SN - 978-3-8322-6723-0 SN - 0945-067X SP - 27 EP - 46 PB - Shaker CY - Aachen AN - OPUS4-16325 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meng, Birgit A1 - Fontana, Patrick A1 - Müller, Urs T1 - Nanotechnologie im Beton - Entwicklungsstand und Innovationschancen KW - Nanotechnologie KW - Analytik KW - Gefüge KW - Zement KW - Beton PY - 2008 SN - 978-3-7625-3624-6 VL - 56 SP - 186 EP - 190 PB - Bauverlag BV CY - Gütersloh AN - OPUS4-16316 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Meng, Birgit A1 - Kühne, Hans-Carsten A1 - Nemecek, J. A1 - Fontana, Patrick ED - E. Fehling, ED - Schmidt, M. ED - S. Stürwald, T1 - Micro texture and mechanical properties of heat treated and autoclaved Ultra High Performance Concrete (UHPC) KW - Ultra high performance concrete KW - Micro texture KW - Mechanical strength KW - Secondary cemetitious materials PY - 2008 SN - 978-3-89958-376-2 IS - 10 SP - 213 EP - 220 CY - Kassel AN - OPUS4-16726 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Siegesmund, S. A1 - Pirskawetz, Stephan A1 - Rieffel, Y. A1 - Gossart, E. A1 - Joksch, U. A1 - Weise, Frank A1 - Plagge, R. A1 - Ruedrich, J. ED - Siegesmund, S. ED - Snethlage, R. T1 - Die Schlossbrücke in Berlin - Via triumphalis N2 - Für die bisher der winterlichen Witterung schutzlos ausgelieferten acht Figurengruppen auf der Schlossbrücke in Berlin wurde innerhalb des vom Landesdenkmalamt Berlin und der Senatsverwaltung für Stadtentwicklung initiierten Forschungsprojektes geprüft, ob und welcher Typ einer Einhausung in der Lage ist, die schädlichen Umwelteinflüsse zu reduzieren. Um den hohen konservatorischen, bauphysikalischen, bautechnischen, künstlerischen und stadträumlichen Anforderungen gerecht zu werden und mögliche Lösungen erstmalig umfassend auf ihre Effektivität zu untersuchen, war die Zusammenarbeit von Denkmalpflegern, Restauratoren, Architekten, Ingenieuren, Geologen, Materialwissenschaftlern und Bauphysikern notwendig. Das durch die Deutsche Bundesstiftung Umwelt (DBU) geförderte Projekt zielte darauf ab, in einem Modellvorhaben mit seinen Partnern, der Technischen Universität Dresden (Institut für Bauklimatik), der Universität Göttingen (Abt. Strukturgeologie und Geodynamik), der Bundesanstalt für Materialforschung und -prüfung (Fachgruppe 7.1, Baustoffe) und unter Beteiligung der Universität der Künste (Fachbereich Konstruktives Entwerfen und Tragwerkslehre) in Berlin, eine innovative und nachhaltige Wintereinhausungskonstruktion auf die besondere Situation der Marmorskulpturen der Schlossbrücke anzupassen und ihre Wirksamkeit zu überprüfen. KW - Marmorverwitterung KW - Denkmalpflege KW - Wintereinhausung PY - 2013 SN - 978-3-95462-060-9 SP - 310 EP - 321 PB - mdv Mitteldeutscher Verlag GmbH CY - Halle/Saale AN - OPUS4-28685 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fontana, Patrick A1 - Pirskawetz, Stephan A1 - Weise, Frank A1 - Meng, Birgit ED - Nothnagel, R. ED - Twelmeier, H. T1 - Zwangsinduzierte Rissbildung in Hochleistungsbeton durch autogenes Schwinden N2 - In diesem Beitrag werden Untersuchungsergebnisse vorgestellt, die den Einfluss von Mikrosilica auf die Selbstaustrocknung und das damit verbundene autogene Schwinden der Bindemittelmatrix von Hochleistungsbetonen beschreiben. Die dadurch hervorgerufenen Schädigungsprozesse wurden mit Hilfe von zerstörungsfreien Prüfmethoden verfolgt. Dabei zeigte sich, dass eine durch äußeren Zwang bedingte Mikrorissbildung durch Schallemissionsanalyse detektiert werden kann. KW - Beton KW - Verformung KW - Rissbildung KW - Zusatzstoffe PY - 2013 SN - 978-3-642-29573-7 DO - https://doi.org/10.1007/978-3-642-29573-7_34 SP - 343 EP - 350 PB - Springer CY - Berlin Heidelberg AN - OPUS4-31758 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Frost, Daniel A1 - Hüsken, Götz A1 - Weise, Frank A1 - Berger, J. ED - Domnick, I. ED - Heimann, S. T1 - Analyse von Schädigungsprozessen statischer und dynamischer Spaltzugversuche unter Verwendung innovativer Prüftechnik N2 - Im Rahmen einer Bachelorarbeit und in Kooperation mit der Bundesanstalt für Materialforschung und -prüfung (BAM) wurden die eintretenden Schädigungsprozesse während des Spaltzugversuche mittels innovativer Prüfverfahren untersucht. Ziel war es, in Untersuchungen Erkenntnisse über das Versagensverhalten unter statischer und dynamischer Spaltzugbeanspruchung bei der Variation verschiedener Einflussfaktoren zu gewinnen. Hierfür wurde die Aussagekraft innerer und äußerer Schädigungsindikatoren zur Charakterisierung der auftretenden Bruchmechanismen analysiert. KW - Spaltzugfestigkeit KW - RDO - Beton KW - Innovative Prüftechniken KW - Bruchmechanismus PY - 2014 SN - 978-3-8440-2643-6 SN - 2191-740X N1 - Serientitel: Forum Geo-Bau – Series title: Forum Geo-Bau VL - 4 SP - 89 EP - 96 PB - Shaker AN - OPUS4-31221 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Christina A1 - Zscherpel, Uwe A1 - Ewert, Uwe A1 - Rosenthal, Martina A1 - Bellon, Carsten A1 - Jaenisch, Gerd-Rüdiger ED - Madalgue, X. P. V. T1 - Reliability investigation of NDE signals N2 - The reliability investigations are dedicated to throw light on the performance of the NDE system with respect to the required aim. This is especially of interest when digitized and processed signals are involved where it becomes hard to assess whether the quality of the system has raised or not. Three different ways to investigate reliability of NDE signals will be described. The first way of investigation, the performance demonstration, is preferred e.g. in the US American nuclear power industry. This is an integral consideration of the non destructive test as a system where the whole NDE system is packed in a black box and only the input in terms of the real existing flaws in the component is considered and compared to the output in terms of the indications of the human inspector or of the automated system. The second – the European tradition – relies on a standardized description of physical/technical parameters of the NDE system which are preconditions for successful system performance. An example for such a standardized set of performance parameters is given in the recently released standard about Xray film digitization CEN EN 14096. The third approach – the modular conception – is a marriage of both: The signal chain is cut into main modules. Each module is assessed in a most appropriate individual way e.g. via modeling calculations. The single results are joint together according to the reliability of the subsystems. Separating criteria for the system were proposed through a reliability formula developed during a series of European-American workshops on NDE reliability. Examples of all three approaches will be given. T2 - 4th International Workshop - Advances in Signal Processing for Nondestructive Evaluation of Materials CY - Québec, Canada DA - 2001-08-07 KW - Reliability of NDE Systems KW - Performance Demonstration KW - Essential Parameters KW - European Standards KW - Radiographic Testing KW - Film Digitalization KW - Austenitic Tube Welds KW - ROC KW - POD PY - 2002 UR - http://intl.gel.ulaval.ca/image_site/abs_quebec_01.pdf SN - 1-571-17091-X N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. N1 - Geburtsname von Jaenisch, Gerd-Rüdiger: Tillack, G.-R. - Birth name of Jaenisch, Gerd-Rüdiger: Tillack, G.-R. N1 - Serientitel: Topics on nondestructive evaluation series – Series title: Topics on nondestructive evaluation series IS - 6 SP - 61 EP - 72 PB - American Society for Nondestructive Testing CY - Columbus, Ohio AN - OPUS4-2007 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Strangfeld, Christoph A1 - Klewe, Tim ED - Rizzo, P. ED - Milazzo, A. T1 - Hygrometric Moisture Measurements Based on Embedded Sensors to Determine the Mass of Moisture in Porous Building Materials and Layered Structures N2 - Subfloors are layered structures, consisting largely of porous building materials, such as screed. They are often suffering damage from tap water leakage, which is a typical problem in buildings, and which has largely contributed to repair costs of almost 3 billion Euro in 2018 alone in Germany. In this context, especially mould plays a role, which is both destroying the structure and posing severe health risks. To determine the damaging effects of moisture, it is necessary to know the respective processes occurring in building materials, especially to quantify the amount of moisture and its progress in the material. In this study, humidity sensors are used to derive the material moisture experimentally. Capacitive sensors recording the relative humidity are embedded into the screed and in the insulation materials such as expanded polystyrene, extruded polystyrene, perlite and glass wool. For the application in screed, the sensors need to be shielded against the aggressive alkaline materials. To ensure an appropriate exchange with the environment, a permeable membrane is requested. Different membrane materials have been investigated regarding their robustness and their permeability. In the first experimental setup, two humidity sensor arrays with seven individual sensors are embedded in homogeneous screed samples. The measured corresponding relative humidity of the screed is converted to the material moisture based on the approach of Hillerborg. In a second experimental setup, a layered structure of a complete subfloor is built in a box of 0.8 m times 0.8 m. The humidity sensors are positioned in the different insulation materials of various thicknesses. By adding water, leakage damage is simulated and its progress and effect is investigated experimentally. The investigations point at the question if the observed moisture is able to generate damage such as mould. The moisture and corresponding humidity values are discussed. It will be shown that this low-cost hygrometric approach can be used easily for moisture monitoring of screed and insulation materials as well KW - Moisture monitoring KW - Material moisture KW - Building materials KW - Embedded humidity sensors PY - 2021 DO - https://doi.org/10.1007/978-3-030-64594-6_22 VL - 1 SP - 213 EP - 225 PB - Springer Nature CY - Cham AN - OPUS4-52013 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rübner, Katrin A1 - Seher, Julia A1 - Müller, Constanze A1 - Müller, Anette A1 - Liebezeit, Steffen A1 - Schnell, Alexander A1 - Martin, Falk ED - Schermer, Detleff ED - Brehm, Eric T1 - REALight - Leichtgranulate und REA-Gips aus feinkörnigen sulfatbelasteten Bau- und Abbruchabfällen und industriellen Nebenprodukten N2 - Die Zielstellung des Forschungsprojekts REALight ist die Entwicklung eines Verfahrens zur Herstellung von Leichtgranulaten auf der Grundlage der Ergebnisse des BMBF-Projekts „Aufbaukörnungen“ unter Erweiterung der Technologie, um Gips zurückzugewinnen und weitere mineralische Einsatzstoffe zu nutzen. In einem thermischen Verfahren werden mineralische Bau- und Abbruchabfälle über ein rohstoffliches Recycling, d. h. einen thermisch-chemischen Stoffumwandlungsprozess, zu leichten Gesteinskörnungen verarbeitet. Dabei werden im Bauschutt vorhandene Sulfate zersetzt. In einer anschließenden Rauchgaswäsche werden die Sulfate abgetrennt. Sie können als Ersatz für REA-Gips verwendet werden. Dies ist Voraussetzung für die Übertragung der Produkt- und Verfahrensidee in die Praxis und für den Nachweis der Sulfatabtrennung und -rückgewinnung aus gipshaltigem Inputmaterial. Es werden Untersuchungen zur Verbreiterung der Rohstoffbasis durch Einkopplung spezifischer mineralischer Stoffströme durchgeführt, die im Ergebnis zu einer Reduktion des Blähmittelbedarfs und einer Absenkung der Brenntemperatur führen sollen. Die Herstellung ausreichender Mengen Leichtgranulate für eine umfassende Charakterisierung nach Norm und die Praxiserprobung in bekannten Anwendungen und neuen Einsatzfeldern ist ein weiteres Projektziel. KW - Bau- und Abbruchabfälle KW - Bauschutt KW - Leichtgranulat KW - Leichte Gesteinskörnung KW - Gipsrückgewinnung PY - 2024 UR - https://www.ernst-und-sohn.de/mauerwerk-kalender-2024-schwerpunkte-klimagerechtes-und-nachhaltiges-bauen-befestigungen-bauen-im?tab=inhalt#rs SN - 978-3-433-03408-8 SP - 515 EP - 518 PB - Ernst & Sohn CY - Berlin AN - OPUS4-60356 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Paz, B. A1 - Meyer, H.-P. A1 - Varychev, A. A1 - Rosner, M. A1 - Vogl, Jochen A1 - Behrendt, S. ED - Treister, M. ED - Yablonsky, L. T1 - Археометрические исследования стеклянных сосудов из погребений ранних кочевников Южного Приуралья T1 - Archäometrische Untersuchungen an achaimenidischen Glasgefäßen aus den Gräbern der frühen Nomaden des südlichen Urals N2 - Die untersuchten Gläser lassen sich in drei Gruppen einteilen. Die beiden Fragmente aus der Nekropole von Pjatimary deuten auf eine frühe Herstellungszeit hin und lassen sich mit eisenzeitlichen Fragmenten iranischer Herkunft vergleichen. Die Glasfunde aus der Nekropole Filippovka bestehen aus völlig unterschiedlichen Glasmaterialien und müssen einer späteren Herstellungszeit zugeordnet werden. Sowohl die unterschiedlichen Rezepturen als auch der definitive Hinweis auf verschiedene Rohstoffquellen zur Herstellung der untersuchten Gläser, lassen ein breitgefächertes Netz von weitreichenden Handelsbeziehungen erkennen. KW - Archäometrie KW - Isotopenverhältnisse Strontium und Blei KW - Elementanalyse KW - Massenspektrometrie KW - Herkunft PY - 2012 SN - 978-5-903011-85-8 VL - 1 SP - 262 EP - 267 PB - TAUS CY - Moskau AN - OPUS4-26899 LA - rus AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Harbich, Karl-Wolfram A1 - Hentschel, Manfred P. A1 - Schors, Jörg A1 - Lange, Axel T1 - Röntgen-Refraktions-Topographie - Ein modernes ZfP-Verfahren zur Bewertung von Mikrorissen und Schlagschäden in Verbundwerkstoffen N2 - Röntgen-Topographie-Verfahren werden zunehmend von industriellen Herstellern und Anwendern Neuer Werkstoffe in Anspruch genommen, um deren mikrostrukturelle Eigenschaften zuverlässig und zerstörungsfrei charakterisieren zu können. Der Einsatz umfaßt die Untersuchung unterschiedlichster Materialien wie Kohlenstoff- (CFK) und Glasfaser-Verbunde (GFK), Hart- und Weichschäume, Industriekeramik sowie neuartige Kunststoffe. Gerade die mechanischen und korrosiven Eigenschaften dieser Werkstoffe weser Werkstoffe werden maßgeblich vom mikrostrukturellem Aufbau dieser Materialien bestimmt. Typische Versagensmechanismen z.B. von Faserkompositen sind neben der Faserenthaftung vor allem durch Mikrorisse gekennzeichnet, die aufgrund von Spannungsspitzen an Faserenden enttstehen und sich senkrecht zu diesen in der Matrix ausbreiten. Ein wesentliches Merkmal der Röntgen-Refaktions-Topographie besteht in der orientierungsselektiven Detektion von Mikroriß-Oberflächen. Deren Nachweisgrenze erstreckt sich bis zum Nanometerbereich. Auch die an Kompositmaterialien definiert herbeigeführten Schäden (Impacts) lassen sich mit dieser Methode ausgezeichnet erfassen und in Korrelation zu mechanischen Kenngrößen quantitativ beschreiben. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 1999 CY - Celle, Deutschland DA - 1999-05-10 KW - Röntgentomographie KW - Mikroriß KW - Schlagfestigkeit KW - Verbundwerkstoff PY - 1999 UR - http://www.ndt.net/abstract/dgzfp99/data/p18.htm SN - 3-931381-27-7 VL - 2 IS - 68 SP - 685 EP - 690 PB - DGZfP CY - Berlin AN - OPUS4-714 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stadthaus, Meinhard A1 - Prokhorenko, P. A1 - Migoun, N. T1 - Physikalische Grundlagen des Eindringverfahrens N2 - Das Eindringverfahren ist in der Praxis weit verbreitet und gilt als sehr einfach in der Anwendung. Fachleute sind sich jedoch darüber im klaren, daß es sich bei diesem Verfahren um, höchst komplexe physikalische Vorgänge handelt und daß die zuverlässige Prüfung in vielen Fällen ein hohes Maß an Kenntnis der Zusammenhänge und Sorgfalt bei der Durchführung verlangt. Zur Optimierung der Anwendung und Weiterentwicklung der Prüfmittelsysteme ist eine quantitative Beschreibung der Eindringprüfung erforderlich. Die Grundlagen des Verfahrens werden zum ersten Mal umfassend in dem hier vorgestellten Buch behandelt, daß in Kürze bei der DGZfP erscheinen wird. In ihm wird von den mikrohydrodynamischen Phänomenen ausgegangen (z.B. Oberflächenspannung, Kapillarwirkung, Diffusion) und die Vorgänge auf der Grundlage von theoretischen und experimentellen Untersuchungen dargestellt. Dabei handelt es sich im Prinzip um die Dynamik des Eindringmittels während der Prüfung. Beim Eindringvorgang interessieren die Einflüsse der nachzuweisenden Inhomogenitäten, also der Typ (Durchgangsloch, Sackloch), die Form (Zylinder, Spalt mit parallelen oder konischen Wänden) und die Abmessungen der Fehler. Der Entwicklungsvorgang wird durch den Austritt des Eindringmittels aus dem Fehler und der anschließenden Ausbreitung in der Entwicklerschicht gekennzeichnet. Der zeitliche Ablauf der Anzeigenbildung wird im Wesentlichen durch die Eigenschaften der Entwicklerschicht bestimmt. Von besonderer Bedeutung ist z.B. der Einfluß des Lösungsmittels beim Naßentwickler. In weiteren Abschnitten werden der visuelle Nachweis der Anzeigen in Abhängigkeit von den Betrachtungsbedingungen dargestellt und Entwicklungstendenzen des Verfahrens aufgezeigt. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 1999 CY - Celle, Deutschland DA - 1999-05-10 KW - Eindringprüfung KW - Materialprüfung PY - 1999 UR - http://www.ndt.net/abstract/dgzfp99/data/p30.htm SN - 3-931381-27-7 VL - 2 IS - 68 SP - 765 EP - 772 PB - DGZfP CY - Berlin AN - OPUS4-719 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wäsche, Rolf A1 - Suchantke, Christian A1 - Yarim, Rasim ED - Schulte, K. ED - Kainer, K. T1 - Sintern von Verbundwerkstoffen im System SiC-TiC-TiB2 T2 - 12. Tagung "Verbundwerkstoffe und Werkstoffverbunde" CY - Hamburg, Deutschland DA - 1999-10-05 KW - Sintern KW - Verbundwerkstoffe KW - Thermochemische Analyse PY - 1999 SN - 3-527-29967-X SP - 189 EP - 194 PB - Wiley-VCH CY - Weinheim AN - OPUS4-720 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weber, Gert T1 - Fuzzy-Klassifikation beim Punktschweißen T2 - MessComp '95 CY - Wiesbaden, Deutschland DA - 1995-09-05 KW - Punktschweissen KW - Qualitätssicherung KW - Fuzzy-Klassifikation PY - 1995 SN - 3-924651-48-5 SP - 48 EP - 50 PB - Network CY - Hagenburg AN - OPUS4-588 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schriever, Robert A1 - Müller, Renate A1 - Rudolphi, Reinald T1 - A calibration element for fire resistance furnaces, testing specimen totally engulfed in fire T2 - 8th Interflam ; 8th International Fire Science and Engineering Conference CY - Edinburgh, Scotland, UK DA - 1999-06-29 KW - Fire resistance furnaces PY - 1999 SN - 0-9532312-3-2 VL - 2 SP - 1057 EP - 1068 PB - Interscience Communications CY - London AN - OPUS4-765 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brandes, Klaus A1 - Helmerich, Rosemarie A1 - Herter, Jürgen ED - Meskouris, K. T1 - Zustandsanalyse und Restnutzungsdauer älterer Stahlbrücken T2 - 7. Fachtagung Baustatik - Baupraxis CY - Aachen, Deutschland DA - 1999-03-18 KW - Stahlbrücken KW - Zustandsanalyse KW - Restnutzungsdauer PY - 1999 SN - 90-5809-044-2 VL - 7 SP - 415 EP - 422 PB - Balkema CY - Rotterdam AN - OPUS4-768 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mietz, Jürgen ED - Schwarz, W. T1 - Realkalisierung, Chloridentzug und Kathodischer Korrosionsschutz - Elektrochemische Verfahren zur Instandsetzung von Stahlbetonbauwerken N2 - Referat: In Stahlbeton- und Spannbetonbauwerken wird der Korrosionsschutz des Bewehrungsstahles durch die Alkalität des Beton-Porenwassers und die sich daraus ergebende Passivierung der Stahloberfläche gewährleistet. Als Folge von Mechanismen, die die Passivschicht zerstören, wie z.B. die Karbonatisierung des Betons oder das Eindringen von Chloriden, kann es zu einer Depassivierung des Stahles kommen. In diesen Fällen sind Maßnahmen notwendig, die Korrosionsreaktionen vermeiden bzw. während der Nutzungsdauer des Bauwerkes in tolerierbaren Grenzen halten. Um die Nachteile der traditionellen Sanierungsverfahren zu umgehen, sind in letzter Zeit verschiedene elektrochemische Methoden zur Instandsetzung entwickelt und erfolgreich angewendet worden. Prinzip, Anwendungsmöglichkeiten sowie Forschungsergebnisse der folgenden Verfahren, elektrochemische Realkalisierung bei Karbonatisierung, elektrochemische Entsalzung bei Chloridkontamination und Kathodischer Korrosionsschutz mit Fremdstrom werden beschrieben und diskutiert. T2 - Seminar über Korrosion von Bewehrungsstahl in Beton CY - Wien, Österreich DA - 1999-01-01 KW - Realkalisierung KW - Chloridentzug KW - Kathodischer Korrosionsschutz PY - 1999 UR - http://www.baufachinformation.de/aufsatz.jsp?ul=99079009354 SN - 3-931681-29-7 SN - 0947-6830 N1 - Sprachen: Deutsch/Englisch - Languages: German/English N1 - Serientitel: WTA-Schriftenreihe – Series title: WTA-Schriftenreihe IS - 19 SP - 165 EP - 181 PB - Aedificatio Verl. CY - Freiburg AN - OPUS4-769 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kautek, Wolfgang A1 - Nauer, G. A1 - Trettenhahn, G. A1 - Neckel, A. A1 - Mirwald, S. ED - Kruger, F. T1 - Die elektrochemische Oxidation von Blei in sulfathaltigen Elektrolyten - In situ Charakterisierung mittels GIXD (grazing incidence X-ray diffraction) und Infrarotspektroskopie T2 - Jahrestagung der GDCh-Fachgruppe Angewandte Elektrochemie CY - Wien, Österreich DA - 1997-09-24 KW - GIXD PY - 1997 SN - 3-924763-71-2 N1 - Sprachen: Deutsch/Englisch - Languages: German/English N1 - Serientitel: GDCh-Monographien – Series title: GDCh-Monographien IS - 12 SP - 132 EP - 139 PB - GDCh CY - Frankfurt am Main AN - OPUS4-770 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mietz, Jürgen A1 - Isecke, Bernd ED - Page, C. ED - Bamforth, P. ED - Figg, J. T1 - Risks of failure in prestressed concrete structures due to stress corrosion cracking T2 - 4th International Symposium on Corrosion of Reinforcement in Concrete Construction CY - Cambridge, England, UK DA - 1996-07-01 KW - Betonkonstruktion KW - Korrosion KW - Streßkorrosion KW - Stahlbeton PY - 1996 SN - 0-85404-731-X SN - 0260-6291 N1 - Serientitel: Special publication / Royal Society of Chemistry – Series title: Special publication / Royal Society of Chemistry IS - 183 SP - 200 EP - 209 PB - Royal Society of Chemistry Information Services CY - Cambridge AN - OPUS4-702 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Zeller, R. A1 - Hollstein, T. ED - Klocke, F. T1 - Einfluß der Oberflächenbearbeitung von Hochleistungskeramiken auf das Gleitverschleißverhalten im Grenzreibungsgebiet T2 - 2. Werkstoffwoche '98 ; Materialica 1998 CY - München, Deutschland DA - 1998-10-12 KW - Tribologie KW - IWM KW - Gleitverschleißverhalten PY - 1999 SN - 3-527-29942-4 VL - 5 SP - 195 EP - 202 PB - Wiley-VCH CY - Weinheim AN - OPUS4-705 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Erhard, Anton A1 - Heß, G. A1 - Thumser, D. A1 - Engl, G. T1 - Schmiedewellenprüfung - Vergleich von manueller und mechanisierter Ultraschallprüfung N2 - Die Ultraschallprüfung von großen Schmiedewellenrohlingen für den Turbinen- und Generatorbau mit Durchmesser bis zu 2000 mm ist nach wie vor eine Herausforderung für die Ultraschallprüfung, weil kleinste "Fehlstellen" nachgewiesen werden müssen. So sind Registriergrenzen in der Größenordnung von 1 mm Kreisscheibe in Wellenmitte durchaus gängige Praxis. Die Prüfung dieser Schmiedeteile wird derzeit meist manuell durchgeführt. Eine mechanisierte Ultraschallprüfung hat den Vorteil einer dem Prüffortschritt angepaßten reproduzierbaren Dokumentation und der Speicherung der Meßdaten in Form von A-Bildern. Bei der Verwendung der Gruppenstrahlertechnik mit deren Möglichkeit der elektronischen Schallfeldsteuerung, wie Änderung des Einschallwinkels oder Fokussierung des Schallbündels, kann eine Ultraschallprüfung des gesamten Querschnitts schnell, ortsgenau reproduzierbar und zuverlässig durchgeführt werden. Durch Speicherung der A-Bilder in einem Pixelnetz können für die Auswertung der Meßwerte Tomogramme d.h. Schnittbilder Quasi-Online erstellt werden. Durch Übernahme der Meßdaten in ein CAD-Auswerte-programm können die Ergebnisse z.B. dr können die Ergebnisse z.B. dreidimensional ortsgetreu dargestellt werden. Ein Vergleich der unterschiedlichen Ultraschallprüfergebnisse zwischen manueller und mechanisierter Prüfung wird an einer Beispielwelle vorgestellt. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 1999 CY - Celle, Deutschland DA - 1999-05-10 KW - Ultraschallprüfung KW - Schiedestück KW - Schallfeld PY - 1999 UR - http://www.ndt.net/abstract/dgzfp99/data/53.htm SN - 3-931381-27-7 VL - 1 IS - 68 SP - 467 EP - 479 PB - DGZfP CY - Berlin AN - OPUS4-706 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Erhard, Anton A1 - Neundorf, B A1 - Hansch, M. A1 - Britz, A. T1 - Bewertung und Auswertung von Ultraschallmeßdaten - VGB-Auswerterichtlinie N2 - Zur Steigerung der Zuverlässigkeit in der Prüfaussage und zur Vermeidung von Fehlinterpretationen ist es sinnvoll, die Auswertung und Bewertung von Ultra-schall-meßdaten zu vereinheitlichen. Dies ist insbesondere bei der mechanisierten Ultraschallprüfung vereinheitlichen. Dies ist insbesondere bei der mechanisierten Ultraschallprüfung gefragt, denn durch die Vielzahl der Meßdaten, der unterschiedlichen Ultraschall-Gerätetechnik und der individuell angepaßten Soft-ware sind unterschiedliche Darstellungen der Ergebnisse möglich. Eine "Standardisierung" der Aus- und Bewertung ist somit nicht möglich. Ein Ziel der hier vorzustellenden Auswerterichtlinie ist deswegen eine Vereinheitlichung der Darstellung. In der Richtlinie werden Mindestanforderungen vorgeschrieben. In diesem Beitrag werden Beispiele für die verschiedenen Darstellungsarten und die Vorgehensweise bei der Bewertung von Amplitude, Laufzeit, Dynamik und Anzeigennmuster gezeigt. Ein weiteres Ziel der Richtlinie ist, die Auswertehilfen und Auswertetechniken so zu dokumentieren, daß der Weg, der zum Prüfergeb-nis führt, jederzeit nachvollziehbar ist. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 1999 CY - Celle, Deutschland DA - 1999-05-10 KW - Ultraschallmeßverfahren PY - 1999 UR - http://www.ndt.net/abstract/dgzfp99/data/58.htm SN - 3-931381-27-7 VL - 68 IS - 68 PB - DGZfP CY - Berlin AN - OPUS4-707 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stadthaus, Meinhard T1 - Zulässigkeitskriterien bei der Schweißnahtprüfung - Ändern die neuen europäischen Normen über die zerstörungsfreie Prüfung (ZfP) von Schweißverbindungen die Bewertung der Prüfergebnisse? KW - Schweißnaht KW - Schweißverbindung PY - 1999 SN - 3-87155-747-1 SN - 0935-0292 VL - 14.2000 SP - 297 EP - 306 PB - Verl. für Schweißen u. Verwandte Verfahren DVS-Verl. CY - Düsseldorf AN - OPUS4-710 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Witt, Klaus T1 - Some recent developments in colour-difference evaluation N2 - A compressed overview is given of developments in colour-difference evaluation that trace back to the early beginnings by MacAdam. The correlation of colorimetric measures of coloured samples with judgements on small colour differences follows normal statistics, but in a three-dimensional space. A wide diversity of experimental conditions in investigations of the colour-difference effect made comparisons of different studies troublesome. Some external influential factors could be identified. Recently developed data sets resulted from much better control of experimental conditions. They form a new basis for deriving colour difference formulae. The CIE is the international body to encourage field research for optimising new colour-difference formulae. The various stages for recommending formulae and exchanging extensive investigation documents make a close link between practitioners and theorists, however, in general industrialists have a faster response. Nonetheless, the CIE still remains the mother-body for international discussion and agreement. Recent developments in colour-difference evaluation show an acceleration of the work of CIE TCs. Their studies first improved the CIELAB-formula, and second now try to fill the gap between the CIE94 and the older CMC(l:c) solutions. A new idea is introduced to optimise the formalism of a formula not at the components of differential terms, but at the co-ordinates which keeps the vector definition of colour-difference as in the CIELAB-formula. An international discussion is proposed on this aspect as a forthcoming step to further improvement of colour-difference evaluation. T2 - ISCC/OSA Joint Symposium on Color Discrimination and Color Difference Perception and Prediction CY - Baltimore, MD, USA DA - 1998-10-04 KW - Farbabstandsbewertung KW - Colour difference evaluation PY - 1999 UR - http://www.cie.co.at/publ/abst/135-99.html SN - 3-900-734-94-1 SN - 1011-6567 N1 - Sprachen: Deutsch/Englisch - Languages: German/English N1 - Serientitel: CIE – Series title: CIE IS - 136 SP - 27 EP - 43 PB - CIE Central Bureau CY - Vienna AN - OPUS4-754 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kalbe, Ute A1 - Müller, Werner A1 - Berger, Wolfgang T1 - Diffusion and sorption of organic contaminants in compacted soils T2 - 7th International FZK/TNO Conference on Contaminated Soil ; 7th ConSoil 2000 CY - Leipzig, Germany DA - 2000-09-18 PY - 2000 SN - 0-7277-2954-3 SP - 1 EP - 7 PB - Telford CY - London AN - OPUS4-755 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kurtenbach, Dirk A1 - Ade, M. A1 - Müller, E. A1 - Mitchell, B.S. ED - Klimanek, P. T1 - Keimbildungs- und Kristallisationskinetik amorpher SiC-Strukturen T2 - Winterschule "Simulationstechniken in der Materialwissenschaft" CY - Cämmerswalde, Deutschland DA - 1999-02-22 KW - Keimbildungskinetik KW - Kristallisationskinetik KW - Siliciumorganische Polymere PY - 1999 SN - 3-86012-078-6 N1 - Serientitel: Freiberger Forschungshefte / B – Series title: Freiberger Forschungshefte / B IS - 295 SP - 293 EP - 300 PB - Techn. Univ. Bergakad. CY - Freiberg AN - OPUS4-759 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jiao, Feng A1 - Österle, Werner A1 - Portella, Pedro Dolabella A1 - Ziebs, Josef T1 - Cyclic hardening of alloy 800h under biaxial loading T2 - International Congress Stainless Steels '96 ; 2nd European congress CY - Düsseldorf and Neuss, Germany DA - 1996-06-03 KW - Hochtemperaturtechnik KW - Beanspruchung, zyklisch KW - Stahl, austenitisch KW - Legierung 800 H PY - 1996 SN - 3-514-00601-6 SP - 292 EP - 293 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-695 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Frenz, Holger A1 - Kinder, Joachim A1 - Klingelhöffer, Hellmuth A1 - Portella, Pedro Dolabella ED - Petit, J. T1 - Fracture of single crystal superalloys under cyclic loading at high temperatures T2 - 11th Biennial European Conference on Fracture (ECF) CY - Poitiers-Futuroscope, France DA - 1996-09-03 KW - Einkristall KW - Superlegierung KW - Hochtemperaturverhalten KW - Turbine PY - 1996 SN - 0-947817-92-1 VL - 2 SP - 1207 EP - 1213 PB - EMAS CY - Warley, West Midlands AN - OPUS4-699 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Wäsche, Rolf ED - Schulte, K. ED - Kainer, K. T1 - Tribologische Prüfungen als begleitende Maßnahme zur Entwicklung von keramischen Tribowerkstoffen T2 - 12. Tagung "Verbundwerkstoffe und Werkstoffverbunde" CY - Hamburg, Deutschland DA - 1999-10-05 KW - Tribologie KW - Reibung KW - Verschleiß PY - 1999 SN - 3-527-29967-X SP - 423 EP - 428 PB - Wiley-VCH CY - Weinheim AN - OPUS4-723 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mietz, Jürgen A1 - Isecke, Bernd T1 - Development of stainless steels for civil engineering applications T2 - 14th International Corrosion Congress (ICC) CY - Cape Town, South Africa DA - 1999-09-26 KW - Nicht rostender Stahl KW - Korrosion PY - 1999 SN - 0-620-23943-3 PB - Document Transformation Technologies CY - Irene AN - OPUS4-727 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bonse, Jörn A1 - Baudach, Steffen A1 - Krüger, Jörg A1 - Kautek, Wolfgang ED - Phipps, C. T1 - Femtosecond laser micromachining of technical materials N2 - Micromachining experiments were performed with Ti:sapphire laser pulses (130 fs - 150 fs, 800 nm, approximately 10 Hz) in air. Employing the direct focusing technique, highly absorbing titanium nitride (TiN) and weakly absorbing polyimide (PI) and polymethylmethacrylate (PMMA) served as target materials. The lateral and vertical precision of the laser ablation and morphological features were characterized by scanning force (SFM), scanning electron (SEM) and optical microscopy. For TiN, incubation can be observed, i.e. the single-pulse surface damage threshold (0.26 J/cm2) is by a factor of two greater than the threshold for 100 pulses. Ablation rates below 10 nm per pulse can be achieved. The evolution of sub-wavelength ripples is presented in dependence on pulse number and laser fluence, respectively. The incubation behavior of the polymers can be described by an accumulation model as for TiN. Experiments on PI with varying focal lengths result in the same modification thresholds. Different polarization states of light (linear, circular) lead to a variation of the ablation rate and to various morphological patterns in the ablation craters (wavelength ripples, cones). Swelling of PMMA occurred at fluences below the ablation threshold. T2 - 3rd SPIE's International Conference on High-Power Laser Ablation CY - Santa Fe, NM, USA DA - 24.04.2000 KW - Ablation KW - Femtosecond pulse laser KW - Laser processing KW - Micromachining KW - Polymer KW - Titanium nitride KW - Ripples PY - 2000 SN - 0-8194-3700-X DO - https://doi.org/10.1117/12.407346 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 4065 SP - 161 EP - 172 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-967 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kautek, Wolfgang A1 - Oltra, R. A1 - Arenholz, E. A1 - Leiderer, P. A1 - Fotakis, C. A1 - Autric, M. A1 - Afonso, C. A1 - Wazen, P. ED - Phipps, C. T1 - Modelling and diagnostic of pulsed laser-solid interactions - Applications to laser cleaning N2 - The present study concerns the cleaning of matenats using pulsed laser irradiarton and it summarises the most recent results obtalned by the collaborative research of different European groups, within the kamework of a European program for tralnlng and mobillrv of researchers. A series of pulsed lasers, which emit at various wavelengths (liom UV to IR) wit11 short duration of pulse (few nano-, pico- or fernto-seconds), is used for the removal of metallic, ceramic and organic pollutants kom contaminated solid surfaces of different natures. The scientific results obtained so far are focused on the laser cleaning of silicon wafers from sub-micrometer particles, tile theoretical modelling of particles removal mechanism during dry laser cleaning, the removal of oxide layers from oxidised metals and alloys, as well as on the development of laser imaging as a diagnostrc tool for the estimation of the efficiency of the proposed cleaning technique. T2 - Osaka High-Power Laser Ablation Conference ; AHPLA '99 Symposium CY - Osaka, Japan DA - 1999-11-01 KW - Laser cleaning KW - Decontamination KW - Surface treatment KW - Particles removal KW - Oxide removal KW - Modelling KW - Laser imaging PY - 2000 UR - http://www.ub.uni-konstanz.de/kops/volltexte/2007/2863/pdf/259_spie_2000.pdf SN - 0-8194-3483-3 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 3885 SP - 499 EP - 508 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-971 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rudolph, Pascale A1 - Krüger, Jörg A1 - Kautek, Wolfgang T1 - Mikrostrukturierung von Glas zur Erzeugung kristalliner Si-Schichten PY - 2000 IS - 12 SP - 7 EP - 36 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-985 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Retter, Utz A1 - Lohse, Heinz ED - Scholz, F. ED - Bond, A. M. T1 - Electrochemical impedance spectroscopy PY - 2002 SN - 3-540-42229-3 SP - 149 EP - 166 PB - Springer CY - Berlin AN - OPUS4-973 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schors, Jörg A1 - Harbich, Karl-Wolfram A1 - Hentschel, Manfred P. T1 - Röntgen-Refraktions-Topographie von Hochleistungs-Werkstoffen N2 - Für die zerstörungsfreie Charakterisierung nichtmetallischer Werkstoffe hat sich das Verfahren der Röntgen-Refraktions-Topographie bewährt. Es handelt sich phänomenologisch um eine Technik der Röntgen-Kleinwinkel-Streuung mit Probekörper-Abtastung bei fest vorgewähltem Streuwinkel. Durch röntgenoptische Brechungseffekte sind innere Ober- und Grenzflächen, insbesondere Mikrorisse, auch unterhalb der licht-mikroskopischen Erkennbarkeitsgrenze, detektierbar. Die Höhe des Streusignals ist dabei proportional zur Gesamt-Grenzfläche im Streuvolumen. So werden z.B. gleichzeitig zahlreiche Risse quanmtitativ detektierbar, ohne daß sie einzeln auf der Ortsskala separiert sind. Da es sich hierbei um eine Durchstrahlungs-Technik handelt, überlagern die Strukturen zu einer Projektion, die - analog zu den radiographischen Verfahren - über die Wanddicke gemittelte innere Oberflächen abbildet. Am Beispiel typischer Hochleistungswerkstoffe, wie SiC-Keramik und C-Faser Komposite (CFK) wird der Informationsgehalt der Röntgen-Refraktions-Topogramme diskutiert. Die Ergebnisse der Keramik-Untersuchung zeigen die unterschiedliche Porengrößenverteilung verschiedener Sinterstufen sowohl ortsaufgelöst als auch statistisch. Die Topogramme der CFK-Probekörper zeigen eine inhomogene Ortsverteilung der Rißdichte nach unterschiedlichen dynamischen Belastungen. Es ergibt sich eine hervorragende Korrelation der Rißdichte mit der Restfestigkeit. Die dargestellten Ergebnisse visualisieren die Anordnung von Grenzflächen und inneren Oberflächen, die sich für zahlreiche Hochleistungs-Werkstoffe, vor allem im Transportmittel-Leichtbau, als relevante Mikrostrukturen für das Versagens-Verhalten und die Werkstoff-Optimierung erweisen. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 KW - Röntgen-Refraktions-Topographie KW - Hochleistungswerkstoffe PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/92.htm SN - 3-931381-32-3 VL - 73-1 IS - 2 SP - 1 EP - 11 PB - DGZfP CY - Berlin AN - OPUS4-866 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hundt, Michael T1 - Wege zur Nutzung von Informationsdatenbanken KW - Informationsdatenbanken PY - 2000 SN - 3-87155-780-3 SN - 0935-0292 VL - 15.2001 SP - 286 EP - 295 PB - Verl. für Schweißen u. Verwandte Verfahren DVS-Verl. CY - Düsseldorf AN - OPUS4-867 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kohlhoff, Harald A1 - Knapp, Jürgen ED - Bonfig, K. T1 - Vollständig nichtmetallischer 3-Achsen Positioniertisch für EMV-Prüfungen T2 - 8. Symposium über Sensoren, Aufnehmer und Systeme CY - Esslingen, Deutschland DA - 2000-05-16 KW - EMV-Prüfung PY - 2000 SN - 3-933609-05-4 N1 - Serientitel: Messen, prüfen, automatisieren – Series title: Messen, prüfen, automatisieren IS - 3 SP - 1(?) EP - 8(?) PB - B-Quadrat Verl. CY - Kaufering AN - OPUS4-888 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Georg A1 - Müller-Mai, C. A1 - Voigt, C. A1 - Gross, U. ED - Wise, D. L. T1 - Bone development and bone structure depend on surface roughness and structure of metalic implants KW - Bone Development KW - Surface Structure PY - 2000 SN - 0-8247-0318-9 SP - 457 EP - 481 PB - Dekker CY - New York AN - OPUS4-878 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomas, Hans-Martin A1 - Rühe, S. A1 - v. Hornhardt, A. A1 - Krull, R. T1 - Wirbelstrom-Handprüfsystem für Eisenbahnschienen N2 - Besonders in beweglichen Weichenteilen, wie z.B. Zungen und beweglichen Herzstückspitzen ist die Detektion von Rissen, die zum Bruch des Bauteils führen können, von außerordentlicher Bedeutung. Wegen der komplizierten geometrischen Randbedingungen muß der Schienenprüfzug hier seinen Prüfkopfträger anheben. Aus diesem Grund werden diese Bereiche regelmäßig durch eine manuelle Ultraschallprüfung überwacht. Da auch sehr kleine Anrisse im Oberflächenbereich interessant sind, soll das bereits vorhandene Prüfverfahren durch ein Wirbelstrom-Handprüfsystem so erweitert werden, daß eine sichere Detektion in den gefährdeten Bereichen möglich ist. Aufbau und Wirkungsweise des Wirbelstrom-Handprüfsystems werden erläutert. KW - Wirbelstrom-Handprüfsystem KW - Eisenbahnschienen PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/96.htm SN - 3-931381-32-3 VL - 73-2 IS - 2 SP - 883 EP - 889 PB - DGZfP CY - Berlin AN - OPUS4-879 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Casperson, Ralf A1 - Pohl, Rainer A1 - Thomas, Hans-Martin T1 - Berührungslose Wirbelstromprüfung mit geregelter Sondenführung bei hoher Prüfgeschwindigkeit N2 - Eine berührungslose Abtastung ist bei hoher Prüfgeschwindigkeit unabdingbar. Nur so kann ein Verschleiß der Wirbelstromsonde durch Abrieb verhindert werden. Gleichzeitig wird eine Beschädigung der zu prüfenden Oberfläche vermieden. Das Wirbelstromverfahren reagiert empfindlich auf Abstandsänderungen zwischen Wirbelstromsonde und Prüfoberfläche. Eine Trennung des Nutzsignals von dem stö-renden Abstandseffekt gelingt mit Hilfe der Phasenselektion in der Regel nur unzu-reichend. Dieses führt insbesondere bei unebenen Oberflächen zu einer Reduzie-rung der Prüfempfindlichkeit. Abhilfe schafft eine geregelte Sondenführung, bei der der Abstand konstant gehalten wird. Es wurden spezielle Sondenhalter nach zwei verschiedenen Verfahren der Ab-standsregelung entwickelt: Ein selbstregelndes System nach dem Luftkissenprinzip sowie ein elektrodynamischer Sondenhalter, angesteuert von einem elektronischen Regler. Erst durch den Einsatz der geregelten Sondenführung wurde die Detektion kleinster Inhomogenitäten (Ø = 100 µm) innerhalb von Mulden möglich. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 KW - Wirbelstromprüfung KW - ZfP KW - Berührungslos KW - Abstandsregelung PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/30.htm SN - 3-931381-32-3 VL - 73-1 IS - 2 SP - 299 EP - 308 PB - DGZfP CY - Berlin AN - OPUS4-880 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sahre, Mario A1 - Reetz, Susanne A1 - Kautek, Wolfgang A1 - Lindner, B. A1 - Medovic, A. A1 - Sleytr, U. A1 - Neubauer, A. ED - Hasche, K. ED - Mirande, W. ED - Wilkening, G. T1 - Gradient Composite Replicas from Protein Crystal Layer Templates produced by Pulsed Laser Deposition T2 - 4th Seminar on Quantitative Microscopy QM 2000 CY - Semmering, Austria DA - 2000-01-12 KW - Pulsed Laser KW - Protein Crystal Layer Templates PY - 2000 SN - 3-89701-503-X SN - 0179-0609 N1 - Serientitel: PTB-Bericht: PTB-F – Series title: PTB-Bericht: PTB-F IS - 39 SP - 8 EP - 16 PB - Physikalisch-Techn. Bundesanst. CY - Braunschweig AN - OPUS4-881 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Goebbels, Jürgen A1 - Illerhaus, Bernhard A1 - Jasiûniene, Elena A1 - Recknagel, Christoph A1 - Weidemann, Gerd T1 - Quantitative Porosimetrie mittels Röntgencomputertomographie N2 - Die sehr gute Reproduzierbarkeit von tomographischen Messungen zusammen mit den digital vorliegenden Ergebnissen ermöglicht die zerstörungsfreie dreidimensionale quantitative Analyse der untersuchten Bauteile und Proben mit Methoden der Bildverarbeitung. Vorwiegend für den Nachweis von Poren eingesetzt, lassen sich mit CT auch unterschiedliche Materialbestandteile analysieren, wobei die einzige Voraussetzung ein hinreichender Unterschied (es genügen wenige Prozent) in den Röntgenabsorptionseigenschaften der zu unterscheidenden Bestandteile ist. Mit den in der Bundesanstalt für Materialforschung und -prüfung entwickelten Computertomographieanlagen kann der Anteil von Hohlräumen und Materialbestandteilen einer Probe bestimmt werden, wobei die Größe der nachzuweisenden Bestandteile sich über mehrere Größenordnungen erstreckt. An ausgewählten Beispielen aus den Bereichen Keramik, Bodenproben und Fahr-bahnübergangssystemen aus Asphalt werden die quantitativen Ergebnisse dargestellt und die in der Bestandteilanalyse erreichbare Genauigkeit diskutiert. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/17.htm SN - 3-931381-32-3 VL - 73 IS - 2 SP - 1-(?)-8(?) PB - DGZfP CY - Berlin AN - OPUS4-922 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hentschel, Manfred P. A1 - Lange, Axel A1 - Schors, Jörg A1 - Harwardt, Michael T1 - Röntgen-Diffraktions-Rotations-Topographie von polymeren Werkstoffen N2 - Polymere Werkstoffe, insbesondere Faser-Komposite, sind auf der molekularen Skala, aber auch hinsichtlich der Faserorientierung unterschiedlich anisotrop, ebenso ihre mechanischen Eigenschaften. Diese können sich richtungsabhängig um bis zu zwei Größenordnungen unterscheiden, was für die Nutzung der Festigkeit im Leichtbau bedeutend ist. Daher besteht Bedarf an der zerstörungsfreien Charakterisierung der Orientierungs-Parameter der Mikrostruktur: Die neuartige Röntgen-Diffraktions-Rotations-Topographie nutzt (wie alle Röntgen-topographischen Verfahren) einerseits die analytischen Informationen der Röntgenstreuung und erlaubt andererseits die ortsaufgelöste Abbildung dieser Information. Für eine kontinuierliche Erfassung der Orientierungs-Informationen des Probekörpers wird dieser im eng kollimierten monochromatischen Fadenstrahl einer Weitwinkel-Streukammer verfahren. An jeder Position wird das Beugungsbild von einem um den Primärstrahl drehbaren Spalt polar abgetastet, der vor einem großflächigen Röntgen-Detektor positioniert ist. Als Rotations-, Polar- oder Textur-Topogramme werden die Streuintensitäten ortstreu dargestellt. Auswerte-Prozeduren erlauben die Ermittlung von Orientierungs-Verteilungs-Funktionen und statistischen Kennwerten. Untersuchungs-Beispiele aus einem EU-Projekt zeigen die molekularen Orientierungsverteilungen in thermoplastischen Spritzguß-Komponenten für den Helikopter-Bau, mit Korrelationen zu mechanischen Eigenschaften. Für die ESA wurde die für CFK-Sandwich-Strukturen von Satelliten-Reflektoren erforderliche präzise Orientierung der C-Fasern mit einer Genauigkeit von 0,1 Grad ermittelt. Pro Durchstrahlungsposition werden für die Orientierungs-Information nur wenige Sekunden benötigt. Die verwendete 18 keV Mo-k-a-Strahlung erlaubt Wandstärken bis zu etwa 20 mm. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/39.htm SN - 3-931381-32-3 VL - 73-1 IS - 2 SP - 1 EP - 10 PB - DGZfP CY - Berlin AN - OPUS4-927 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Retzko, Iris A1 - Kühn, Gerhard A1 - Unger, Wolfgang A1 - Lippitz, Andreas ED - Mittal, K. T1 - Metal doped plasma polymer films T2 - 7th Symposium on Metallized Plastics CY - Newark, NJ, USA DA - 1999-12-02 KW - Plasma polymer KW - r.f. pulsed plasma KW - Conducting films KW - Metal-polymer interface PY - 2001 SN - 90-6764-340-8 VL - 7 SP - 117 EP - 142 PB - VSP CY - Utrecht AN - OPUS4-929 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tscharntke, Dirk A1 - Wüstenberg, Hermann A1 - Erhard, Anton T1 - Bewertung kritischer Befunde bei der Ultraschallprüfung an Schweißnähten mit Modellrechnungen N2 - Typische Probleme bei der Schweißnahtprüfung mit Ultrschall entstehen bei ferritischen Werkstoffen vor allem durch Anzeigen von der Nahtkontur, vor allem aus dem Wurzelbereich. Die klassischen Methoden der Unterscheidung formbedingter Anzeigen von Fehlern - z.B. durch Vergleich der A-Bilder von beiden Seten einer Stumpfnaht - können unterstützt werden durch die Modellierung derartiger Anzeigen im Zusammenhang mit hypothetischen Fehlern im wurzelnahen Bereich. Im Beitrag wird die Anwendung vereinfachender Modelle auf diese Problematik vorgestellt und an Beispielen demonstriert. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 KW - Ultraschallprüfung KW - Schweißnahtprüfung KW - Modellrechnungen PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/10.htm SN - 3-931381-32-3 VL - 73-1 IS - 2 SP - 105 EP - 117 PB - DGZfP CY - Berlin AN - OPUS4-936 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bonse, Jörn A1 - Krüger, Jörg A1 - Kautek, Wolfgang A1 - Wrobel, J. M. T1 - Femtosecond pulse laser machining of InP wafers N2 - Ablation of indium phosphide wafers in air was performed with 130 fs laser pulses at a wavelength of 800 nm at a low repetition rate of 10 Hz. In order to evaluate the role of the incubation effects, the relationship between the number of laser pulses used for the ablation and the threshold fluence was studied. Particular attention was paid to the chemical composition, surface morphology and structural variations of the ablated area. T2 - 5th Laser Applications in Microelectronics and Optoelectronics Manufacturing Conference (LAMOM) CY - San José, CA, USA DA - 240.01.2000 KW - Femtosecond laser ablation KW - Indium phosphide KW - Auger electron spectroscopy PY - 2000 SN - 0-8194-3550-3 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 3933 SP - 280 EP - 287 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-937 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schulz, Eduard A1 - Erhard, Anton A1 - Heinrich, W. A1 - Mohr, F. T1 - Nachqualifikation einer Wasserreibbremse mit Ultraschall N2 - Neu entwickelte Gasturbinen werden im Prüffeld mit wechselnden Belastungen beaufschlagt. Dazu wird die Gasturbine mit einer Wasserreibbremse gekoppelt, mit der eine definierte Last erzeugt werden kann. Ursprünglich war die Wasserreibbremse für eine bestimmte Leistung, die den früheren Leistungen der Gasturbine entsprach, ausgelegt worden. Die erste Prüfung fand im Jahr 1975 statt. Da neuere Gasturbinen wesentlich höhere Leistungen erbringen und die vorhandene Wasserreibbremse weiterhin eingesetzt werden sollte, musste eine Nachqualifizierung vorgenommen werden. Das Ziel war die Absicherung auf eine mögliche Sprödbruchgefahr. Zunächst wurde eine Studie zur Prüfbarkeit erstellt. An speziellen Testkörpern wurden im Ultraschallabor der BAM Vorversuche zur Machbarkeit, zur Empfindlichkeitsein-stellung und zur Vorbereitung der Prüfung durchgeführt. Dazu wurden spezielle Gruppenstrahlerprüfköpfe gefertigt und ein an die komplizierte Geometrie der Bremsscheiben angepasster Manipulator gebaut. Ferner wurde, um die Prüfzeiten zu reduzieren, die Software zur Datenerfassung und zur Auswertung angepasst. Im Werk Berlin der Siemens AG wurde in Zusammenarbeit mit der Siemens AG Erlangen eine Ultraschallprüfung mit der Gruppenstahlertechnik der Wasserreibbremse durchgeführt. Überprüft wurde das gesamte Volumen auf axial, radial und tangential beanspruchte Fehler in den Bereichen der Welle und der Bremsscheibe.Die Überprüfung ergab keine relevanten Fehler, so dass die Wasserreibbremse weiterhin eingesetzt werden kann. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/79.htm SN - 3-931381-32-3 VL - 73 IS - 2 SP - 1(?) EP - 7(?) PB - DGZfP CY - Berlin AN - OPUS4-940 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Matschat, Ralf A1 - Dudzus, Thomas A1 - Meier, Klaus A1 - Recknagel, Sebastian A1 - Kipphardt, Heinrich A1 - Hedrich, Martina ED - Hirschfeld, D. T1 - Messung von Sauerstoff und Stickstoff mit klassischer Trägergasheißextraktion und Trägergasheißextraktion nach Aktivierung mit Photonen für die nationalen primären Kalibriernormale T2 - 8. Symposium Nichtmetalle in Metallen - NIM ; 8. Tagung des Gemeinschaftsausschusses "Nichtmetalle in Metallen" der GDMB CY - Münster, Deutschland DA - 2000-03-16 PY - 2000 SN - 3-9806913-1-4 SP - 19 EP - 27 PB - GDMB, Ges. für Bergbau, Metallurgie, Rohstoff- und Umwelttechnik CY - Clausthal-Zellerfeld AN - OPUS4-915 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schröder, Hartmut A1 - Bahr, Horst A1 - Zeynalov, Eldar T1 - Determination of phenolic antioxidant stabilizers in PP and HDPE by means of an oxidative model reaction T2 - 6th International Plastics Additives and Modifiers Conference ; 6th Addcon World 2000 CY - Basel, Switzerland DA - 2000-10-25 PY - 2000 SN - 1-85957-242-1 IS - Paper 3 SP - 1 EP - 15(?) PB - RAPRA Technology Ltd. CY - Shawbury AN - OPUS4-952 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Jörg A1 - Bonse, Jörn A1 - Baudach, Steffen A1 - Kautek, Wolfgang A1 - Lenzner, M. A1 - Wrobel, J. M. T1 - Femtosecond-Pulse Laser Machining of Semiconducting Materials N2 - Summary form only given. Machining investigations of crystalline silicon have been performed with laser pulses at a wavelength of 780 nm in the range between 5 fs and 400 fs. Applying 100 pulses per spot, surface damage thresholds were determined by the measurement of the damage diameter. In this pulse duration regime, the threshold fluences were nearly constant. Single-pulse investigations with 5 fs pulses yielded a value of about 0.15 J cm-2 identical to the multi-pulse experiment. This is in contradiction to the behaviour of dielectrics where incubation effects alter the optical properties down to the 5 fs pulse regime. Employing laser pulses with a duration of 130 fs at a wavelength of 800 nm, single-pulse ablation thresholds of 0.23 J cm-2 and 0.16 J cm-2 were determined for Si and InP in air, respectively. The threshold fluence was calculated from the linear relation between the square of the diameters versus the logarithm of the laser fluences. T2 - CLEO/Europe 2000 ; Conference on Lasers and Electro-Optics Europe ; Conférence Européenne sur les Lasers et l'Electro-Optique ; CLEO/Europe-IQEC CY - Nice, France DA - 2000-09-10 PY - 2000 SN - 0-7803-6319-1 DO - https://doi.org/10.1109/CLEOE.2000.910410 PB - IEEE Service Center CY - Piscataway, NJ AN - OPUS4-958 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Plarre, Rüdiger A1 - Reichmuth, F. ED - Subramanyam, B. ED - Hagstrum, D. T1 - Impact KW - Prallmaschinen KW - Mechanische Schädlingsbekämpfung PY - 2000 SN - 0-7923-7976-4 PB - Kluwer Academic Publ. CY - Boston AN - OPUS4-904 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Georg A1 - Mensing, M. A1 - Sittinger, M. A1 - Gross, U. A1 - Rahmanzadeh, R. A1 - Müller-Mai, C. ED - Haas, N. P. T1 - Autologe Chondrozyten Transplantation durch Tissue Engineering auf resorbierbaren bioaktiven Biomaterialträgern T2 - 64. Jahrestagung der Deutschen Gesellschaft für Unfallchirurgie CY - Hannover, Deutschland DA - 2000-09-10 PY - 2000 SN - 3-540-67734-8 SN - 0945-1382 N1 - Serientitel: Hefte zur Zeitschrift "Der Unfallchirurg" – Series title: Hefte zur Zeitschrift "Der Unfallchirurg" IS - 282 SP - 1(?) PB - Springer CY - Berlin AN - OPUS4-948 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schumacher, Gerhard A1 - Chen, Weiye A1 - Frohberg, G. A1 - Wahi, R. P. ED - Chandra, T. T1 - Evolution of microstructure and its effect on creep behavior of single crystal superalloy SC16 under creep fatigue loading T2 - International Conference on Processing & Manufacturing of Advanced Materials - Processing, Fabrication, Properties, Applications ; THERMEC 2000 CY - Las Vegas, NV, USA DA - 2000-12-04 KW - Superalloy KW - Single crystal KW - SC16 KW - Creep fatigue KW - Rafting KW - Creep behavior PY - 2000 SN - 0-08-044026-6 PB - Elsevier Science AN - OPUS4-949 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böhning, Martin A1 - Goering, Harald A1 - Hao, Ning A1 - Mach, Reinhard A1 - Schönhals, Andreas ED - Cassidy, P. T1 - Polycarbonate/SiC nanocomposites - Influence of nanoparticle dispersion on molecular mobility and gas transport T2 - 7th International Symposium on Polymers for Advanced Technologies CY - Fort Lauderdale, FL, USA DA - 2005-09-21 KW - Nanocomposites KW - Nanoparticles KW - Polycarbonates KW - Dielectric properties KW - Gas permeation PY - 2005 VL - 16 IS - 2-3 SP - 262 EP - 268 PB - Wiley CY - Chichester AN - OPUS4-7062 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thuy, Maximilian A1 - Brauch, N. A1 - Niebergall, Ute A1 - Alig, I. A1 - Oehler, H. A1 - Böhning, Martin T1 - Environmental Stress Cracking of PE-HD Induced by Liquid Test Media Representing Crop Protection Formulations N2 - Packaging containers for dangerous goods that include aggressive liquids require that any packaging material that is based on high-density polyethylene has a high degree of stability and durability. This work is focused on testing the environmental stress cracking of the high-density polyethylenes used for such containers in contact with crop protection formulations, in particular, two model liquids established in Germany as standardized test media representatives for crop protection formulations containing the various admixtures typical for such products. One of the liquids is water-based and contains mostly surface-active ingredients, while the other is solvent-based and includes some emulsifiers. Originally established for pin impression tests, these model liquids and their individual components were here used for the first time as environmental media in the Full Notch Creep Test, which addresses the resistance against environmental stress cracking. The Full Notch Creep Test was carried out on five high-density polyethylene types with both model liquids, and also on one selected material with its components. The evaluation was focused on the fracture surface structures, which were visualized by a scanning electron microscope and by optical in situ imaging of the notch opening. While the water-based model liquid and its surface-active individual components induced environmental stress cracking with the characteristic pattern for a craze-crack mechanism and so-called brittle fracture on the surface, the solvent-based model liquid and its soluble ingredients exhibited rather ductile failure behavior, caused by the plasticizing effect on the polymer that reduced the yield stress of the high-density polyethylene. For both cases, fracture surface analysis, together with side views of the crack opening, showed a clear relation between surface pattern, notch deformation (e.g., by blunting), or crack opening due to crack growth with time to failure and the solubility of the liquids in high-density polyethylene. KW - Environmental stress cracking KW - Fracture surface KW - Full Notch Creep Test KW - Crop protection formulations KW - High-density polyethylene PY - 2023 DO - https://doi.org/10.1520/STP164320210095 SP - 317 EP - 341 PB - ASTM International CY - West Conshohocken, PA (USA) AN - OPUS4-57459 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Streicher, Doreen A1 - Algernon, Daniel A1 - Kohl, Christoph A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Wiggenhauser, Herbert ED - Cruz, P. ED - Frangopol, D. T1 - Development and combined application of NDT echo-methods for the investigation of post tensioned concrete bridges T2 - 3rd International Conference on Bridge Maintenance, Safety and Management - "Bridge Maintenance, Safety, Management, Life-Cycle Performance and Cost" CY - Porto, Portugal DA - 2006-07-16 KW - Brückenuntersuchung KW - ZfP-Bau-Verfahren PY - 2006 SN - 0-415-40315-4 N1 - Serientitel: Balkema proceedings and monographs in engineering, water and earth sciences – Series title: Balkema proceedings and monographs in engineering, water and earth sciences SP - 1 EP - 8(?) PB - Taylor & Francis CY - London AN - OPUS4-13866 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Algernon, Daniel A1 - Wiggenhauser, Herbert ED - Mazal, P. T1 - Identification of short transient signals within impact-echo data using the Hilbert-Huang-Transform T2 - 3rd International Workshop of NDT Experts CY - Prague, Czech Republic DA - 2005-10-10 KW - Hilbert-Huang Transform KW - Time-Frequency Analysis KW - Impact-Echo KW - Concrete Structures PY - 2005 SN - 80-2142996-8 SP - 9 EP - 17 PB - Univ. of Technology CY - Brno AN - OPUS4-11711 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Streicher, Doreen A1 - Algernon, Daniel A1 - Wöstmann, Jens A1 - Behrens, Matthias A1 - Wiggenhauser, Herbert T1 - Automated NDE of post-tensioned concrete bridges using radar, ultrasonic echo and impact-echo T2 - NDE Conference on Civil Engineering CY - St. Louis, Missouri, USA DA - 2006-08-14 KW - Automatisierte ZfPBau-Verfahren KW - Radar KW - Ultraschallecho KW - Impact-Echo KW - Spannbetonbrücken PY - 2006 SN - 1-57117-148-7 SP - 439 EP - 444 PB - ASTM CY - St. Louis AN - OPUS4-13942 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Algernon, Daniel A1 - Schubert, F. A1 - Wiggenhauser, Herbert T1 - Impact-Echo: Experimental and Numerical Study of Acoustic Wave Propagation T2 - NDE Conference on Civil Engineering CY - St. Louis, Missouri, USA DA - 2006-08-14 KW - Impact-Echo KW - Nondestructive Testing KW - Geometry Effects KW - EFIT PY - 2006 SN - 1-57117-148-7 SP - 215 EP - 222 PB - ASTM CY - St. Louis AN - OPUS4-14123 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Algernon, Daniel A1 - Wiggenhauser, Herbert T1 - Impact-Echo Signal Processing T2 - NDE Conference on Civil Engineering CY - St. Louis, Missouri, USA DA - 2006-08-14 KW - Impact-Echo KW - Nondestructive Testing KW - Geometry Effects KW - EFIT PY - 2006 SN - 1-57117-148-7 SP - 207 EP - 214 PB - ASTM CY - St. Louis AN - OPUS4-14126 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Roeren, S. A1 - Schwenk, Christopher A1 - Rethmeier, Michael ED - H.K.D.H. Bhadeshia, ED - H. Cerjak, ED - E. Kozeschnik, T1 - Different approaches to model clamping conditions within a welding simulation PY - 2007 SN - 978-3-902465-69-6 SP - 1093 EP - 1106 CY - Graz, Austria AN - OPUS4-16489 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pittner, Andreas A1 - Weiss, D. A1 - Schwenk, Christopher A1 - Rethmeier, Michael T1 - A methodology for the fast temperature field generation for welding simulation T2 - 17th International Conference "Computer Technology in Welding and Manufacturing" CY - Cranfield, UK DA - 2008-06-18 KW - Welding simulation KW - Temperature field generation KW - Short calculation time KW - Multiple experiments KW - Inverse heat conduction problem KW - Neural networks PY - 2008 SN - 978-1-903761-07-6 SP - 1 EP - 12 PB - TWI CY - Cambridge AN - OPUS4-18290 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph A1 - Kaatz, Rico ED - Carbary, L.D. ED - Wolf, A. T. T1 - Exploration and evaluation of the performance and durability of SSG systems by dynamic-mechanical system testing N2 - Structural sealant glazing (SSG) is an impressive technical response to the challenges of modern structural design. The evaluation of fitness for use as well as durability is a precondition for approval of SSG-façades by building authorities because of their special safety relevance. However, the potential of the actual evaluation methodology to reproduce performance as well as durability under real use conditions is generally assessed to be limited. The concept so far is criticized as mainly single-loading and incomplete in comparison to the real use conditions. The exercised separation of the in reality interacting loading effects is assessed as insufficient and inadequate to explore performance. Consequently, the performance and capability of SSG-solutions is only fragmentarily explored. However, the most restricting argument so far is the deficit of the actual test methodology for life cycle prognosis under interacting mechanical as well as climatic loads. Because of the limited acceptance, additional structural design conditions are imposed by the authorities. Besides this restriction, there is also an increasing demand by the authorities, architects, and users for determinable working life cycles, not least under economic aspects. That is why knowledge, particularly regarding SSG-performance and durability, must be expanded. Together with partners representing all branches involved in façade engineering (engineering design, sealant producer, applicator, and cladding company) the Federal Institute for Materials Research and Testing (BAM) develops a new system test focused on the substrate–sealant–glass panel interaction. With it, a new comprehensive dynamic–mechanical evaluation methodology already introduced at the fourth Symposium in Anaheim, CA, in 2011 shall be complemented by a performance-related system test. Subject-matter of this contribution is the presentation of a new dynamic–mechanical system test method and its first experimental application on SSG-systems. We describe our approach beginning with the discussion of relevant load effects on sealant joints and with the help of a highly generalized finite element (FE) analysis. Resulting from a parameter study of various load combinations acting on different SSG-construction types, we derive a practicable deformation load function from the decisive load categories taking into account regular as well as extraordinary loads. Assumptions and procedures to quantify their parameter values (regarding the effective direction and order of deformation magnitude affecting the substrate–sealant–glass bond) are discussed. The calculated decisive sealant deformations resulting from the parameter study are validated by simplified mechanical plausibility tests. Subsequently, the transfer of the findings about the substrate–sealant–glass panel bond loading into the design and construction of an adapted system test specimen and the development of a multifunctional test facility is introduced. The multi-functional applicability of the system test device is discussed. On the basis of results during our actual operational checks, first ideas about system performance and durability under superimposed loading are presented. A validation of this new test methodology by comparison to test results of disassembled samples and in situ results is a task for separate research activities. KW - Sealants KW - Structural glazing KW - Performance-oriented test procedure KW - Dynamic–mechanical system test method KW - Superimposed loading KW - Performance evaluation KW - Durability evaluation KW - Performance testing KW - System evaluation KW - Structural sealants PY - 2015 SN - 978-0-8031-7611-9 DO - https://doi.org/10.1520/STP158320140064 SN - 2154-6673 N1 - Serientitel: ASTM Selected Technical Papers – Series title: ASTM Selected Technical Papers VL - 5 IS - STP 1583 SP - 235 EP - 264 PB - ASTM CY - West Conshohocken, PA, USA AN - OPUS4-33867 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kaatz, Rico A1 - Recknagel, Christoph ED - Carbary, L.D. ED - Wolf, A. T. T1 - Advanced evaluation of structural sealant glazing systems by a new system test approach N2 - More information about the capability and especially about the durability of structural sealant glazing (SSG) systems are needed. To make a contribution to unanswered questions, a suitable system evaluation test is necessary. The basis for such a test is a load function, which accounts for the decisive loads SSG systems are exposed to during their working life. This paper proposes a general load function for standard SSG systems at central German locations for accelerated durability tests. Decisive loads are determined and different SSG construction types defined. The performance of these SSG systems under exposure to external loads and to a dynamic pendulum impact is investigated via finite element analyses using a hyperelastic material model. The external loads are applied separately and superimposed. Compression, tensile, and shear deformations of the sealant are determined. It is found that the sealant is subjected to normal and shear stresses simultaneously. The requirements for a representative specimen are derived. The results will be taken as basics for the development and the construction of a test facility to evaluate the durability of structural sealant glazing systems. KW - Sealants KW - Structural glazing KW - Decisive loads KW - ANSYS KW - Finite element analysis KW - Hyperelastic KW - Non-linear material KW - Grid study KW - Sealant deformation KW - Load function KW - Performance testing KW - System evaluation KW - Structural sealants KW - Durability PY - 2015 SN - 978-0-8031-7611-9 DO - https://doi.org/10.1520/STP158320140074 SN - 2154-6673 N1 - Serientitel: ASTM Selected Technical Papers – Series title: ASTM Selected Technical Papers VL - 5 IS - STP 1583 SP - 376 EP - 402 PB - ASTM CY - West Conshohocken, PA, USA AN - OPUS4-33868 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Rübner, Katrin ED - Hughes, J. ED - Leslie, A. ED - Walsh, A. T1 - The micro texture of concrete made with municipal waste incinerator bottom ash as an aggregate component T2 - 10th Euroseminar on Microscopy Applied to Building Materials CY - Paisley, UK, Scottland DA - 2005-06-21 KW - MSWI bottom ash KW - Concrete KW - Durability KW - Aluminium KW - Micro texture PY - 2005 SN - 1-903978-21-1 SP - 85 EP - 86 PB - University of Paisley CY - Paisley AN - OPUS4-7647 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Baeßler, Matthias A1 - Rücker, Werner ED - Soize, C. ED - Schueller, G. T1 - New results on the behaviour of ballasted tracks on bridge decks T2 - IMO-WIND: An integrated monitoring system for offshore wind energy turbines CY - Paris, France DA - 2005-09-04 KW - Schotteroberbau KW - Beschleunigung KW - Eisenbahnbrücken KW - Gleislage KW - Destabilisierung PY - 2005 SN - 90-5966-033-1 VL - 2 SP - 1077 EP - 1082 PB - Millpress CY - Rotterdam AN - OPUS4-11234 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Zacher, M. A1 - Baeßler, Matthias ED - Delgado, R. ED - Goicolea, R. T1 - Dynamic behaviour of ballast on railway bridges T2 - Advanced Course "Dynamics of High-Speed Railway Bridges" CY - Porto, Portugal DA - 2005-09-20 KW - Schotteroberbau KW - Beschleunigung KW - Eisenbahnbrücken PY - 2005 SN - 972-752-080-4 SP - 125 EP - 142 CY - Porto AN - OPUS4-11233 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph T1 - Fahrbahnübergänge aus Asphalt - Stand der Prüftechnik; Bewährung und Erfahrungen in Deutschland T2 - ASTRA-EMPA-VERAS-Fachtagung 2005 CY - Dübendorf, Schweiz DA - 2005-04-05 PY - 2005 SN - 3-905594-44-7 SP - 43 EP - 52 PB - EMPA CY - Dübendorf AN - OPUS4-11266 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Auersch, Lutz A1 - Baeßler, Matthias A1 - Dietrich, T. A1 - Holzlöhner, Ulrich T1 - Dynamik und Setzungen von Bahnfahrwegen auf homogenem und inhomogenem Untergrund N2 - Seit 25 Jahren betreibt die Bundesanstalt für Materialprüfung intensive Forschung auf dem Gebiet der Eisenbahndynamik unter realistischer Einbeziehung des Gleisuntergrundes. Das umfaßt theoretisch/numerische Arbeiten, Feldmessungen und Labor-, Modell- und Elementversuche zu den folgenden Fragen: -die Erschütterungs- und Körperschallweiterleitung durch den natürlichen Boden, - das Schwingungsverhalten der verschiedenen Fahrwege auf speziellen Boden- und Schotterschichten, - die dynamischen Kräfte während der Überfahrt des Fahrzeugs sowie - das Setzungs- und Differenzsetzungsverhalten verschiedener Gleisstrukturen. Es werden Rechen- und Meßergebnisse zum Vergleich der Festen Fahrbahn und des Schottergleises vorgestellt und daraus Möglichkeiten für die weitere Verbesserung von Bahnfahrwegen gefolgert. Eine wesentliche Rolle kommt dabei der Wechselwirkung von Platten und steifen Declcschichten mit dem umgebenden Boden zu, deren Theorie in der BAM in den 90er Jahren weiterentwickelt wurde. T2 - Baugrundtagung CY - Hannover, Germany DA - 18.09.2000 PY - 2000 SN - 3-7739-1249-8 SP - 273 EP - 282 PB - VGE CY - Essen AN - OPUS4-11587 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rücker, Werner A1 - Baeßler, Matthias A1 - Rohrmann, Rolf ED - Rackwitz, F. T1 - Experimentelle Untersuchungen zu Schotterfahrwegen auf Brücken N2 - Auf Schnellfahrstrecken können Brückentragwerke durch die Überfahrt von Zügen zu Resonanzschwingungen angeregt werden. Dies führt ungünstigstenfalls zu übermäßigen Beschleunigungen des Brückendecks infolge derer sich das Schotterbett destabilisiert. In diesem Beitrag wird die Wirkung von vertikalen Brückenschwingungen auf den Schotteroberbau anhand experimenteller Untersuchungen beschrieben. T2 - Festschrift zum 60. Geburtstag von Univ.-Professor Dr.-Ing. habil. Stavros A. Savidis KW - Schotteroberbau KW - Beschleunigung KW - Eisenbahnbrücken KW - Gleislage KW - Destabilisierung KW - Unterschottermatten PY - 2006 SN - 3-540-27425-1 DO - https://doi.org/10.1007/3-540-27438-3_26 SP - 397 EP - 414 PB - Springer CY - Berlin AN - OPUS4-11493 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rücker, Werner A1 - Rohrmann, Rolf A1 - Hille, Falk T1 - Guidelines for monitoring and assessment - A SAMCO initiative as a basis for the international standardization T2 - 2nd International Conference on Structural Health Monitoring and Intelligent Infrastructure CY - Shenzhen, China DA - 2005-11-16 KW - Monitoring KW - Zustandsüberwachung KW - Schadensanalyse KW - Windlasten KW - Dynamik KW - Windenergieanlagen KW - Offshore KW - Bauliche Bewertung PY - 2006 SN - 0-415-39652-2 SP - 1671 EP - 1676 PB - Taylor & Francis CY - London AN - OPUS4-11566 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Onel, Yener A1 - Dehn, F. ED - Alexander, M. T1 - Application of X-ray tomography for the verification of damage mechanisms in concrete T2 - International Conference on Concrete Repair, Rehabilitation and Retrofitting CY - Cape Town, South Africa DA - 2005-11-21 KW - Bauwerkssicherheit KW - Betonbau KW - Strukturaufklärung KW - Zerstörungsfreie Prüfung KW - Röntgen 3D-CT PY - 2005 SN - 0-415-39654-9 N1 - Serientitel: Balkema proceedings and monographs in engineering, water and earth sciences – Series title: Balkema proceedings and monographs in engineering, water and earth sciences SP - 170 EP - 171 PB - Taylor & Francis CY - London AN - OPUS4-11595 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vater, Ernst-Joachim A1 - Recknagel, Christoph ED - Petit, C. T1 - Bond strength and crack bridging behaviour of bridge deck surfacings for concrete bridges N2 - The operational principle for today's bridge deck surfacings is a strong and durable bond between all layers of the pavement and the concrete structure under all loads. A strong bond helps to ensure the desired safety level against water penetration. But in use there is a strong loading of the bond by crack development in the structure or pavement and its dynamical movement. To ensure the sealing function of the bridge deck surfacing over the time its waterproofing has to show a durable crack bridging ability. With it the useful life of the bridge deck surfacing is essentially determined. To characterise the influences on a durable bond strength and crack bridging ability of waterproofings special research and tests were realised in the BAM. From the test results it is possible to detect suitable waterproofing layers and differences in durability. Tensile fatigue strength and other mechanical features seems to be special suited material characteristics to describe the crack bridging behaviour of waterproofing layers. T2 - 5th International RILEM Conference on Cracking in Pavements CY - Limoges, France DA - 2004-05-05 PY - 2004 UR - http://www.rilem.net/fiche.php?cat=conference&reference=pro037-062 SN - 2-912143-47-0 IS - 37 SP - 521 EP - 528 PB - RILEM Publications CY - Bagneux AN - OPUS4-11873 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niemann, Joachim A1 - Habel, Wolfgang A1 - Hille, Falk ED - Mencik, J. T1 - Complex monitoring system for long-term evaluation of prestressed bridges in the new Lehrter Bahnhof in Berlin T2 - 2nd International conference "Reliability, Safety and Diagnostics of Transport Structures and Means 2005" CY - Pardubice, Czech Republic DA - 2005-07-07 KW - Structural behaviour KW - Measurement KW - Monitoring KW - Fibre optic sensor KW - Long-term stability PY - 2005 SN - 80-7194-769-5 SP - 248 EP - 256 PB - University of Pardubice CY - Pardubice AN - OPUS4-11771 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hille, Falk A1 - Rohrmann, Rolf A1 - Rücker, Werner ED - Parke, G. ED - Disney, P. T1 - Guideline for the assessment of existing structures T2 - 5th International Conference on Bridge Management, "Bridge Management 5, Inspection, maintenance, assessment and repair" CY - Guildford, England, UK DA - 2005-04-11 KW - Monitoring KW - Zustandsüberwachung KW - Dynamik KW - Brücken KW - Bauliche Bewertung PY - 2005 SN - 0-7277-3354-0 SP - 227 EP - 234 PB - Thomas Telford CY - London AN - OPUS4-11680 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Patitz, G. A1 - Weise, Frank ED - Siegesmund, S. ED - Auras, M. ED - Snethlage, R. T1 - Moderne Methoden der Bauwerksdiagnostik in der Praxisanwendung T2 - Tagung "Umwelt - Naturstein - Denkmal" CY - Osnabrück, Deutschland DA - 2005-04-19 KW - Denkmal KW - Bauwerksdiagnose KW - Zerstörungsfreie Prüfung KW - Radar KW - Radiografie KW - Videoskopie KW - Mikrowellenverfahren PY - 2005 SN - 3-361-00593-0 SP - 140 EP - 149 PB - Ed. Leipzig CY - [Leipzig] AN - OPUS4-11661 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Aguiar, J. B. ED - Jalali, S. ED - Camoes, A. ED - Ferreira, R.M. T1 - MODINSYS modular systems for the protection and repair of concrete structures T2 - 13th International Congress on polymers in concrete - ICPIC 2010 CY - Funchal-Madeira, Portugal DA - 2010-02-11 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - SPCC KW - PCC KW - Repair mortar KW - Modular systems KW - Concrete rehabilitation PY - 2010 SN - 978-972-99179-4-3 SP - 697 EP - 704 CY - Funchal-Madeira, Portugal AN - OPUS4-20937 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph A1 - Pirskawetz, Stephan ED - Wolf, A. T. T1 - Joint sealing systems for pavements - A new approach towards a performance related evaluation of capability and durability N2 - Joint sealants influence decisively the performance and service life of pavements although they account for only a small fraction of the total investment. Motivated by the damages observed and the resulting, increasing maintenance efforts, the Federal German Government recognizes the need for performance-evaluated joint sealing systems with improved capability (fitness-for-purpose) and durability. A literature study showed that an identification of the actual mechanical system behavior under realistic loads as well as a prediction regarding the durability (fatigue, climatic effects) of joint sealing systems are either completely lacking in most of the relevant evaluation methods or have only been incompletely addressed previously. Furthermore an imbalance between commonly used test methodologies and the actual development status of modern modified sealing materials exists, i.e., the current test methods are not effective in evaluating the performance of tailor-made products. In this paper, the authors suggest a methodology to overcome the present situation. In contrast to the existing, predominantly empirical evaluation and selection of joint sealing materials and systems for pavements, the new approach is defined by verified performance under relevant and superimposed loads. This new approach is expected to allow a more engineered joint design. In addition to the adaptation of performance-oriented material identification tests, a special focus was placed on the development and installation of a complex test facility for the investigation of the service capability and durability of joint sealing systems in building constructions in general. This paper presents an attempt at the realization of this approach for pavement joints with the help of our new joint sealant test equipment utilizing a specific, adapted load function, which comprises cyclic movements (slow and fast acting), as well as crucial climatic exposures. The test data and its interpretation are discussed. For example, the actual mechanical behavior of the various joint sealing systems as well as the relevant maximum loading of cohesive and adhesive bonds can be deduced and used to differentiate between systems. Furthermore, information gained allows discrimination of products within the various joint sealing systems. The test results will also enable numerical simulations, e.g., of different joint designs or materials by finite element analysis. The fatigue behavior is detected by analysis of cycle-dependent changes of the mechanical system characteristics. The evaluation methodology further allows investigation of the degradation mechanisms of specific system failures and, thus, enables service life prediction by reproducing the performance of the complete system under realistic conditions. Constructional defects and material flaws can be activated and detected by the performance-related test methodology, thus identifying possible corrections to material selection and application procedures. The potential of the proposed evaluation methodology is discussed for several thermoplastic and reactive joint sealing systems. KW - Pavement joints KW - System evaluation KW - System test method KW - Superimposed loading KW - Performance KW - Mechanical characteristics KW - Capability evaluation KW - Durability evaluation KW - Cohesive failure KW - Adhesive failure PY - 2010 SN - 978-0-8031-3426-3 N1 - Serientitel: ASTM Selected Technical Papers – Series title: ASTM Selected Technical Papers VL - 3 IS - STP 1514 SP - 15 EP - 37 CY - West Conshohocken, PA, USA AN - OPUS4-21933 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Bürgisser, Philip A1 - Weise, Frank A1 - Meng, Birgit ED - Castro-Borges, P. ED - Moreno, E.I. ED - Sakai, K. ED - Gjorv, O.E. ED - Banthia, N. T1 - The natural pozzolana 'Rhenish trass' and its effect on ASR in concrete T2 - CONSEC’10 - 6th International conference on concrete under severe conditions - Environment and loading CY - Mérida, Yucatán, México DA - 2010-06-07 KW - AKR KW - Beton KW - Natürliche Pozzolane PY - 2010 SN - 978-0-415-59316-8 SP - 313 EP - 320 PB - Taylor & Francis AN - OPUS4-21969 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fontana, Patrick A1 - Lehmann, Christian A1 - Müller, Urs A1 - Meng, Birgit ED - Brameshuber, W. T1 - Reactivity of mineral additions in autoclaved UHPC T2 - International Conference on Material Science and 64th RILEM Annual week CY - Aachen, Germany DA - 2010-09-06 KW - UHPC KW - Autoklavierung KW - Mikrostruktur KW - Festigkeit KW - Phasenzusammensetzung KW - Forschung und Entwicklung PY - 2010 SN - 978-2-35158-110-0 VL - III IS - PRO 77 SP - 69 EP - 77 PB - RILEM Publications AN - OPUS4-21970 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Voland, Katja A1 - Weise, Frank T1 - Application of innovative measurement techniques for monitoring of ASR induced damage processes in concrete T2 - 8th fib International PhD symposium in civil engineering CY - Lyngby, Denmark DA - 2010-06-20 KW - Alkali-silica reaction KW - 40°C fog chamber KW - 60°C concrete prism test KW - Acoustic emission KW - Ultrasonic velocity KW - mu-3D-CT PY - 2010 SN - 9788778773012 SP - 629 EP - 634 AN - OPUS4-21631 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rübner, Katrin A1 - Jakubcová, Petra A1 - Herbst, Tristan T1 - Saving natural resources by material recycling N2 - Today modern reprocessing techniques lead to materials, which bear the potential to be used as aggregates or additives in mineral building materials. Because of highly sophisticated reprocessing techniques residues with relatively stable composition over a certain range and relatively defined properties can be produced. At the same time, new German and European regulations demand a waste management to decrease waste volume stored at landfills to save natural resources and to enhance sustainable development by recycling of diverse residues. This paper shows the activities of the working group 'Saving Resources by Material Recycling'. T2 - CESB 10 - Central Europe towards Sustainable Building CY - Prague, Czech Republic DA - 2010-06-30 KW - Aggregate KW - Cement KW - Concrete KW - Environment KW - Recycling KW - Residue KW - Sustainability PY - 2010 SN - 978-80-247-3624-2 SP - 437 EP - 440 AN - OPUS4-22442 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jakubcová, Petra A1 - Schnell, A. A1 - Rübner, Katrin A1 - Müller, A. A1 - Meng, Birgit T1 - Nutzung von Bau- und Abbruchabfällen zur Herstellung von Recyclinggranulaten T2 - Tagung Bauchemie der GDCh-Fachgruppe Bauchemie 2010 CY - Dortmund, Deutschland DA - 2010-10-07 KW - Sekundärrohstoffe KW - Sekundäre Gesteinskörnung KW - Recycling PY - 2010 SN - 978-3-936028-65-2 VL - 42 SP - 129 EP - 136 AN - OPUS4-22444 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Herbst, Tristan A1 - Rübner, Katrin A1 - Meng, Birgit ED - Teipel, U. ED - Schmidt, R. T1 - Ganzheitliche Eignungsbewertung potenzieller Recyclingbereiche für Mauerwerksbruch N2 - Unsere Industriegesellschaft ist auf den ständigen Abbau und Verbrauch von Rohstoffen und Energie angewiesen. Der Bausektor zählt dabei zu den größten Verursachern von Stoffströmen in Deutschland. Zum einen ist das Bauen mit einem hohen Bedarf an materiellen und energetischen Ressourcen sowie finanziellen Aufwendungen verbunden. Zum anderen sind nahezu 50 % des deutschen Abfallaufkommens dem Bausektor zuzurechnen, Die Beschränktheit natürlicher Ressourcen, die zunehmenden negativen Umweltauswirkungen sowie die Verteuerung und Verknappung von Deponieraum führten in den letzten Jahren zu einem Umdenken in der Bau- und Abfallwirtschaft hin zu einer Kreislaufwirtschaft. Im Sinne einer nachhaltigen Kreislaufwirtschaft sind die im Bausektor anfallenden Restmassen zukünftig möglichst einem Recycling zuzuführen. Bei der Wahl der geeigneten Recyclingoption spielen technische, ökologische und ökonomische Fragestellungen eine Rolle. Für den Bereich Mauerwerksrecycling existiert bisher keine umfassende Methodik zur ganzheitlichen Eignungsbewertung (Technik, Ökologie, Ökonomie) mit einem vertretbaren Arbeitsaufwand. Grundlegende strukturierte und strukturierende Informationen für das Recycling von Mauerwerksbruch fehlen bislang. Aus diesem Grunde wird derzeit mit dem Ziel eines möglichst hochwertigen Mauerwerksrecyclings eine umfassende und praxisorientierte Methodik entwickelt. Diese Methodik soll eine ganzheitliche Eignungsbewertung unterschiedlicher potenzieller Recyclingbereiche für Mauerwerksbruch ermöglichen. Im vorliegenden Beitrag werden erste Ansätze dieser Bewertungsmethode vorgestellt. T2 - 2. Symposium "Rohstoffeffizienz und Rohstoffinnovationen" CY - Nürnberg, Germany DA - 10.02.2011 PY - 2011 SN - 978-3-8396-0222-5 VL - 2 SP - 153 EP - 165 PB - Fraunhofer Verlag AN - OPUS4-23255 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph A1 - Alte-Teigeler, R. A1 - Bergmann, F.-J. A1 - Gebhards, G. A1 - Grabe, W. A1 - Guse, J. A1 - Hartel, S. A1 - Huth, P. A1 - Jannicke, B. A1 - Lobach, T. A1 - Schneider, T. A1 - Sondermann, E. A1 - Vengels, D. A1 - Voß, M. A1 - Willand, E. ED - Roßbach, W. T1 - Zusätzliche Technische Vertragsbedingungen und Richtlinien für Fugen in Verkehrsflächen ZTV Fug-StB 15 N2 - Unter Berücksichtigung praktischer und wissenschaftlich-technischer Erkenntnisse der letzten 15 Jahre - insbesondere auch auf der Basis verschiedener BAM-Forschungsergebnisse und Zulassungsverfahren - erfolgte eine Überarbeitung der Grundlagen, Bauprinzipien, Ausführungs- und Einbaukriterien sowie der Zulassungs- und Gütesicherungsmaßnahmen für insgesamt 4 Bauarten von Fugenfüllsystemen für hochbeanspruchte Verkehrsflächen. In diesem - für den Bundesfernstraßenbereich verbindlichen bautechnischen Regelwerk - finden insbesondere auch die Ergebnisse mehrerer wissenschaftlicher Vorhaben der BAM bezüglich labortechnischer Untersuchungen und Felduntersuchungen zum Funktionsverhalten und zur Dauerhaftigkeit erste baurechtliche Konsequenzen. Auf der Basis von Untersuchungen u.a. im Brückenbau wurden Regelungen für die Fugenausbildung in Asphalt und bei Befestigungskombinationen erarbeitet und umgesetzt. Damit konnten umfassende Regelungen für die maßgebenden Fahrbahnbeläge im Bundesfernstraßenbereich der Straßenbauverwaltung und ausführenden Industrieunternehmungen zur Verfügung gestellt werden. Die Neufassung dieser Regelungen dient darüber hinaus dem Ziel, den von der BAM vertretenen Wechsel hin zu einer performance-bezogenen Bewertungsmethodik, vorzubereiten. KW - Baustoffe KW - Fugen KW - Betonstraßen PY - 2015 SN - 978-3-86446-162-0 SP - 1 EP - 50 PB - FGSV Verlag GmbH CY - Köln AN - OPUS4-37220 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Pirskawetz, Stephan A1 - Meng, Birgit ED - L. Binda, ED - M. di Prisco, ED - R. Felicetti, T1 - Application of innovative testing methods for the quasi non-destructive assessment of the material condition in hydraulic engineering structures T2 - First Internatonal RILEM Symposium "on Site Assessment of Concrete, Masonry and Timber Structures" (SACoMaTiS 2008) CY - Varenna, Italy DA - 2008-09-01 KW - Quasi non-destructive assessment KW - Hydraulic engineering structures KW - Radar KW - Ultrasonic and ray PY - 2008 SN - 978-2-35158-062-2 VL - 1 IS - PRO 59 SP - 1 EP - 10 PB - RILEM Publications AN - OPUS4-18356 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph A1 - Pirskawetz, Stephan A1 - Lüddecke, Falk ED - Imad L. Al-Qadi, ED - Tom Scarpas, ED - Loizos, Andreas T1 - Performance and service life prediction of crack preventative joint systems T2 - 6th RILEM International Conference on cracking in Pavements "Pavement Cracking - Mechanisms, Modeling, Detection, Testing and Case Histories" CY - Chicago, USA DA - 2008-06-16 KW - Joint sealing systems KW - Bituminous compounds KW - Climate KW - Service life KW - Concrete pavement PY - 2008 SN - 978-0-415-47575-4 SP - 779 EP - 790 PB - CRC Press AN - OPUS4-18281 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beck, Matthias A1 - Rübner, Katrin A1 - Mietz, Jürgen ED - Ravinda K. Dhir, ED - Tom A. Harrison, ED - Li Zheng, ED - Sivakumar Kandasami, T1 - Experimental investigation of propagation of reinforcement corrosion T2 - Concrete Durability: Achievement and Enhancement, International Conference CY - Dundee, Scotland, UK DA - 2008-07-08 KW - Reinforced concrete KW - Electrochemical parameters KW - Self-corrosion KW - Damage symptoms KW - Fly ash KW - Mercury intrusion measurements KW - Pore structure KW - Pozzolan PY - 2008 SN - 978-1-84806-039-5 IS - EP88 SP - 83 EP - 94 PB - IHS BRE Press AN - OPUS4-18312 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph T1 - Modern materials and system solutions for pavements and expansion joints and its performance-related investigation T2 - 2nd European Road Transport Research Arena TRA 2008, "Greener, Safer and Smarter Road Transport for Europe" CY - Ljubljana, Slovenia DA - 2008-04-21 KW - Innovation KW - Performance-related assessment KW - New materials KW - New technology in Road Construction PY - 2008 SN - 978-961-6527-12-5 SP - 1 EP - 7 AN - OPUS4-18286 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph A1 - Goebbels, Jürgen A1 - Meinel, Dietmar ED - Manfred N. Partl, T1 - Identification of the void structure of asphalt materials T2 - International ISAP Symposium on Asphalt Pavements and Environment CY - Zürich, Switzerland DA - 2008-08-18 KW - Inner structure KW - Structure characteristics KW - Void KW - Asphalt KW - Open-pored asphalt PY - 2008 SN - 978-3-905594-51-5 SP - 566 EP - 577 AN - OPUS4-18284 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rübner, Katrin A1 - Meinhold, Uwe ED - Ravindra K. Dhir, ED - Peter C. Hewlett, ED - Laslo J. Csetenyi, ED - Moray D. Newlands, T1 - Use of silica residue from chemical industry as a mineral additive in concrete KW - Silica KW - Waste material KW - Concrete KW - Mineral additive KW - Pozzolan KW - Engineering properties PY - 2008 SN - 978-1-84806-037-1 IS - EP86 SP - 661 EP - 672 PB - IHS BRE Press AN - OPUS4-18788 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Gardei, André A1 - Massah, Sima A1 - Meng, Birgit T1 - Hydraulische Bindemittel KW - Bindemittel KW - Puzzolane KW - Hydraulisch KW - Beton KW - Denkmalpflege PY - 2008 SN - 978-3-86568-451-6 N1 - Serientitel: Berichte zu Forschung und Praxis der Denkmalpflege in Deutschland – Series title: Berichte zu Forschung und Praxis der Denkmalpflege in Deutschland IS - 16 SP - 9 EP - 21 PB - Michael Imhof AN - OPUS4-19087 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rübner, Katrin A1 - Goering, Harald A1 - Klobes, Peter A1 - Tschritter, H. ED - S. Kaskel, ED - P. Llewellyn, ED - F. Rodríguez-Reinoso, ED - N.A. Seaton, T1 - Investigation on the structure of silica/polyurethane nanocomposites T2 - 8th International symposium on the characterisation of porous solids CY - Edinburgh, UK DA - 2008-06-10 KW - Density KW - Dynamic mechanical analysis KW - ESW KW - Flammability KW - Nanocomposite KW - Polyurethane KW - Pore structure KW - Silica KW - Strength PY - 2009 SN - 978-1-84755-904-3 IS - Special Publication No. 318 SP - 150 EP - 158 PB - RSC AN - OPUS4-19411 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lüddecke, Falk A1 - Auersch, Lutz A1 - Baeßler, Matthias A1 - Rücker, Werner T1 - Dynamisches Verhalten von Gründungen von Offshore-Windkraftanalagen T2 - 3. VDI-Fachtagung - Baudynamik CY - Kassel, Deutschland DA - 2009-05-14 PY - 2009 SN - 978-3-18-092063-4 SN - 0083-5560 VL - 2063 SP - 467 EP - 480 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-19862 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vasilic, Ksenija A1 - Roussel, N. A1 - Meng, Birgit A1 - Kühne, Hans-Carsten ED - Olafur H. Wallevik, ED - Stefan Kubens, ED - Sonja Oesterheld, T1 - Computational modelling of SCC flow: Reinforcement network modelled as porous medium T2 - 3rd International RILEM symposium on rheology of cement suspensions such as fresh concrete CY - Reykjavik, Iceland DA - 2009-08-19 KW - SCC KW - Modelling KW - CFD PY - 2009 SN - 978-2-35158-091-2 IS - PRO 68 SP - 148 EP - 154 PB - RILEM Publications AN - OPUS4-20238 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Huismann, Sven A1 - Weise, Frank A1 - Schneider, U. ED - F. Dehn, ED - E.A.B. Koenders, T1 - Influence of the preload on the mechanical properties of high strength concrete at high temperatures T2 - 1st International RILEM workshop on concrete spalling due to fire exposure CY - Leipzig, Germany DA - 2009-09-03 KW - High performance concrete KW - High temperatures KW - Fire KW - Mechanical properties PY - 2009 SN - 978-3-00-028604-9 SP - 189 EP - 200 AN - OPUS4-20256 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bürgisser, Philip A1 - Müller, Urs A1 - Meng, Birgit A1 - Abart, R. ED - Leon Black, ED - Phil Purnell, T1 - Influence of natural pozzolans of mechansims of the alkali silica reaction (ASR) in concrete T2 - 29th Cement and concrete science conference CY - Leeds, UK DA - 2009-09-07 KW - AKR KW - Natürliche puzzolanische Zusatzstoffe KW - C-S-H Phasen PY - 2009 SN - 978-0-85316-281-0 SP - 143 EP - 146 AN - OPUS4-20249 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bürgisser, Philip A1 - Müller, Urs A1 - Meng, Birgit A1 - Abart, R. ED - Stark, J. T1 - Der Einfluss von natürlichen Puzzolanen vulkanischen Ursprungs auf die Alkali-Kieselsäurereaktion (AKR) im Beton T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 KW - AKR KW - Natürliche puzzolanische Zusatzstoffe KW - C-S-H Phasen PY - 2009 SN - 978-3-00-027265-3 VL - 2 SP - 2-0687 - 2-0692 CY - Weimar AN - OPUS4-20298 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meng, Birgit A1 - Kühne, Hans-Carsten A1 - Eichhorn, Michael ED - Stark, J. T1 - Performance-Verbesserung bei Betonwerksteinen durch multi-funktionale Nano-Additive T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 PY - 2009 SN - 978-3-00-027265-3 VL - 2 SP - 2-0675 - 2-0680 CY - Weimar AN - OPUS4-20302 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Stark, J. T1 - Betoninstandsetzung mit modular zusammengesetzten PCC- und SPCC-Mörteln T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - SPCC KW - PCC PY - 2009 SN - 978-3-00-027265-3 VL - 2 SP - 2-0151 - 2-0156 CY - Weimar AN - OPUS4-20301 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Herbst, Tristan A1 - Hauer, B. A1 - Rübner, Katrin A1 - Meng, Birgit ED - Stark, J. T1 - Nachhaltiges Bauen mit Beton - Einsatz sekundärer Gesteinskörnungen T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 KW - Sekundärrohstoffe KW - Müllverbrennungsaschen KW - Sekundäre Gesteinskörnung PY - 2009 SN - 978-3-00-027265-3 VL - 2 SP - 2-1273 - 2-1278 CY - Weimar AN - OPUS4-20299 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank ED - Siebel, E. T1 - Übertragbarkeit von Frost-Laborprüfungen auf Praxisverhältnisse KW - Beton KW - Frost KW - Schädigungsprozesse KW - Zerstörungsarme und zerstörungsfreie Prüfverfahren PY - 2005 SN - 3-410-65760-6 N1 - Serientitel: Deutscher Ausschuß für Stahlbeton – Series title: Deutscher Ausschuß für Stahlbeton IS - 560 SP - 31-33; 89-106 PB - Beuth CY - Berlin AN - OPUS4-11874 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühne, Hans-Carsten A1 - Maultzsch, Matthias A1 - Meinhold, Uwe ED - Betoniyhdistys, S. T1 - Repair systems for hydraulic engineering structures with low strength T2 - European Sympsoium on Service Life and Serviceability of Concrete Structures (ESCS-2006) CY - Espoo, Finland DA - 2006-06-12 KW - Water engineering structures KW - Low strength concrete KW - Repair systems KW - Performance tests PY - 2006 SN - 952-507579-6 SP - 352 EP - 358 PB - Concrete Assoc. of Finland CY - Helsinki AN - OPUS4-12570 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Müller, Urs A1 - Goebbels, Jürgen ED - Fort, R. ED - de Buergo, R. T1 - Micro x-ray computer tomography (mu-CT) for the low invasive analysis of stone T2 - Heritage, Weathering and Conservation Conference (HWC 2006) CY - Madrid, Spain DA - 2006-06-21 PY - 2006 SN - 0-415-41272-2 VL - 2 SP - 555 EP - 560 PB - Taylor & Francis CY - London AN - OPUS4-12510 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Weise, Frank A1 - Grell, S. ED - Fort, R. ED - de Buergo, R. T1 - The long term effects of a water repellent treatment on a volcanic tuff T2 - Heritage, Weathering and Conservation Conference (HWC 2006) CY - Madrid, Spanien DA - 2006-06-21 PY - 2006 SN - 0-415-41272-2 VL - 2 SP - 777 EP - 784 PB - Taylor & Francis CY - London AN - OPUS4-12509 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fontana, Patrick A1 - Meng, Birgit ED - Jensen, O. T1 - Influence of mix composition on early-age autogenous deformations of cement pastes T2 - International RILEM Conference on Volume Changes of Hardening Concrete: Testing and Mitigation CY - Lyngby, Denmark DA - 2006-08-20 KW - Autogenes Schwinden KW - Hochleistungsbeton KW - Hydratation KW - Porenstruktur KW - Zusatzstoffe KW - Zusatzmittel PY - 2006 SN - 2-351-58004-4 SP - 261 EP - 272 PB - RILEM Publications CY - Bagneux AN - OPUS4-12672 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Meng, Birgit A1 - Österle, Werner A1 - Gardei, André ED - Stark, J. T1 - Characterization of granulated blast furnace slag by means of the combined application of the FIB/TEM technique T2 - 16. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2006-09-20 PY - 2006 SN - 3-00-018263-2 VL - 1 SP - 1-0189 - 1-0195 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-13717 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pirskawetz, Stephan A1 - Weise, Frank A1 - Fontana, Patrick ED - Jensen, O. T1 - Detection of early-age cracking using acoustic emission T2 - International RILEM Conference on Volume Changes of Hardening Concrete: Testing and Mitigation CY - Lyngby, Denmark DA - 2006-08-20 KW - Schallemissionsanalyse KW - Autogenes Schwinden KW - Mikrorissbildung KW - Hochfester Beton PY - 2006 SN - 2-351-58004-4 SP - 385 EP - 392 PB - RILEM Publications CY - Bagneux AN - OPUS4-12673 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Onel, Yener A1 - Maier, Bärbel ED - Stark, J. T1 - Zeitliche und räumliche Visualisierung des Gefügezustandes und der Transportvorgänge in frostbeanspruchten Normalbetonen T2 - 16. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2006-09-20 KW - Dauerhaftigkeit KW - Frostbeständigkeit KW - Beton KW - Schadensanalyse KW - Innovative Prüftechnik PY - 2006 SN - 3-00-018263-2 IS - Band 2 SP - 2-0701 - 2-0706 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-14398 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang A1 - Niemann, Joachim A1 - Hille, Falk ED - Waßmuth, W. T1 - Langzeitmonitoring der äußeren Brücken des Hauptbahnhofs KW - Monitoring KW - Sensor KW - Bauwerksicherheit PY - 2006 SN - 3-7771-0349-7 SP - 116 EP - 123 PB - Eurailpress Tetzlaff-Hestra CY - Hamburg AN - OPUS4-14067 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühne, Hans-Carsten A1 - Haamkens, Frank A1 - Maultzsch, Matthias A1 - Meinhold, Uwe A1 - Meng, Birgit ED - Stark, J. T1 - Instandsetzung von Beton mit geringen Festigkeiten T2 - 16. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2006-09-20 KW - Wasserbau KW - Beton mit geringer Festigkeit KW - Instandsetzung KW - Leistungsfähigkeit PY - 2006 SN - 3-00-018263-2 IS - Band 2 SP - 2-1173 - 2-1180 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-14475 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bellon, Carsten A1 - Jaenisch, Gerd-Rüdiger T1 - Computer simulation of X-Ray NDE process T2 - International Symposium on Computed Tomography and Image Processing for Industrial Radiology CY - Berlin, Germany DA - 2003-06-23 KW - Computersimulation KW - Radiografie KW - CAD PY - 2003 SN - 3-931381-48-X N1 - Geburtsname von Jaenisch, Gerd-Rüdiger: Tillack, G.-R. - Birth name of Jaenisch, Gerd-Rüdiger: Tillack, G.-R. N1 - Serientitel: DGZfP-Proceedings BB – Series title: DGZfP-Proceedings BB IS - 84-CD SP - 187 EP - 189 PB - DGZfP CY - Berlin AN - OPUS4-2872 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bellon, Carsten A1 - Jaenisch, Gerd-Rüdiger T1 - Durchstrahlungsprüfung am Computer simuliert T2 - DGZfP-Jahrestagung 2005 CY - Rostock, Deutschland DA - 2005-05-02 KW - Radiographie KW - Computer-Simulation PY - 2005 SN - 3-931381-64-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 94-CD SP - 1 EP - 4(?) PB - DGZfP CY - Berlin AN - OPUS4-11590 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Christina A1 - Elagin, Mstislav A1 - Bellon, Carsten A1 - Ewert, Uwe A1 - Zscherpel, Uwe A1 - Rosenthal, Martina A1 - Redmer, Bernhard A1 - Ryden, H. A1 - Ronneteg, U. ED - Proske, D. T1 - Probability-of-Detection-Evaluation of NDT Techniques for Cu-Canisters for Risk Assessment of Nuclear Waste Encapsulation T2 - 4th International Probabilistic Symposium CY - Berlin, Germany DA - 2006-10-12 KW - Zerstörungsfreie Prüfung KW - Zuverlässigkeit KW - POD KW - Endlagerung radioaktiver Abfälle PY - 2006 SN - 3-00-019232-8 N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. SP - 227 EP - 252 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-14418 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schulze, M. A1 - Staude, Andreas A1 - Neukamm, M. A1 - Neuschaefer-Rube, U. A1 - Goebbels, Jürgen A1 - Bartscher, M. A1 - Bellon, Carsten A1 - Hilpert, U. ED - Weckenmann, A. T1 - Hochgenaue Geometriebestimmung von Mikrobauteilen mit Computertomographie (CT) N2 - Ziel des Vorhabens ist die hochgenaue und vollständige Erfassung innerer und äußerer Geometrien von Mikrobauteilen mittels Mikro-Computertomographie (µCT). Industriell wichtige Mikrobauteile sind z.B. Einspritzsysteme, Festplattenkomponenten oder Instrumente für die minimal-invasive Chirurgie. Typische Bauteilgrößen liegen hier im Bereich 0,1 mm - 100mm; typische zu messende Strukturen haben Größen von 0,5 µm - 500 µm. Mit klassischen Methoden der Messtechnik ist eine schnelle und hochgenaue Erfassung der gesamten Oberfläche von Mikrobauteilen bisher kaum möglich. Innenstrukturen von Mikrobauteilen können mit keiner optischen oder taktilen Messtechnik zerstörungsfrei gemessen werden. Diese Einschränkungen sollen mittels hochgenauer µCT überwunden werden. Hierzu soll der Messprozess simuliert werden, um die Anwendung von Korrekturverfahren zur Genauigkeitssteigerung zu ermöglichen. CT-Messungen an kalibrierten Mikroprüfkörpern sollen die Korrekturverfahren verifizieren. Für die Kalibrierung der Prüfkörper sollen Multisensor-Verfahren entwickelt und getestet werden. Diese sollen es erlauben, Prüfkörper gleichzeitig hochgenau und mit großer Messpunktdichte zu kalibrieren. Es ist geplant, die an Prüfkörpern erreichten Messunsicherheiten und Auflösungen zum Projektabschluss an realen, industriellen Mikrobauteilen (z.B. Mikrozahnrädern) messtechnisch nachzuweisen. T2 - Abschlusskolloquium DFG Schwerpunktprogramm 1159 - Neue Strategien der Mess- und Prüftechnik für die Produktion von Mikrosystemen und Nanostrukturen CY - Erlangen, Deutschland DA - 06.10.2010 PY - 2011 SN - 978-3-8440-0358-1 SN - 0945-0769 SP - 36 EP - 52 PB - Shaker Verlag GmbH AN - OPUS4-24875 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ebell, Gino A1 - Bösche, T. A1 - Steinbock, O. T1 - Rückschlüsse aus den Schadensbildern N2 - Wasserstoffinduzierte Spannungsrisskorrosion an hochfesten und hochempfindlichen Spannstählen führt an bestehenden Brückenbauwerken nach Jahren der Rissinitiierung zu Trag- und Standsicherheitsverlusten. Anhand des Beispiels der Brücke am Altstädter Bahnhof gibt es eine bauartbedingte Schadensinitiierung die über den gesamten Spannkanalquerschnitt zu Spannungsrisskorrosion führen kann. KW - Korrosion KW - Spannstahl KW - Spannungsrisskorrosion PY - 2021 SP - 85 EP - 87 PB - Landesbetrieb Straßenwesen Brandenburg CY - Hoppegarten AN - OPUS4-53506 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neuneck, G. A1 - Panne, Ulrich ED - Ullrich, J. ED - Bleyer, U. ED - Köster, S. ED - Lämmerzahl, C. ED - Meschede, D. ED - Schröter, L. T1 - Politikberatung mit Physik N2 - Obwohl die Wissenschaft selbst unpolitisch ist, beeinflusst sie sehr wohl den politischen Raum. Wissenschaftliche Politikberatung verbindet Forschung mit politischem Handeln und bewertet Themen wie Klimawandel, Kl oder Gesundheitskrisen. Die Beratung kann dabei sowohl von der Wissenschaft ausgehen als auch von der Politik beauftragt werden. KW - Politikberatung KW - Physik PY - 2025 SN - 978-3-9826935-0-7 SP - 329 EP - 332 PB - Teamdruck CY - Stuhr AN - OPUS4-63312 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Sebastian A1 - Kipphardt, Heinrich A1 - Panne, Ulrich T1 - Certified reference materials: CRM - ERM - EURONORM T2 - Reference Materials and Interlaboratory Comparisons II CY - Medlov, Czech Republic DA - 2005-11-07 KW - CRM KW - ERM KW - ECRM PY - 2005 SN - 80-86380-30-0 SP - 7 EP - 12 PB - Cesky metrologicky institut CY - Medlov AN - OPUS4-11253 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hahn, Oliver A1 - Kemmlein, Sabine A1 - Jann, Oliver A1 - Kalus, Sabine A1 - Stolle, Dirk T1 - Emissions of Flame Retardants from Selected Consumer Products and Building Materials T2 - 11th International Conference on Flame Retardants 2004 CY - London, England, UK DA - 2004-01-27 KW - Flame retardants KW - GC/MS KW - SVOC PY - 2004 SN - 0-9541216-2-7 SP - 27 EP - 36 PB - Interscience Communications CY - London AN - OPUS4-3060 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rabin, Ira ED - Raggetti, L. T1 - Material Studies of Historic Inks: Transition from Carbon to Iron-Gall Inks N2 - This chapter offers observations and considerations concerning black writing inks encountered in writing supports transmitting documentary and literary texts of the late Antiquity and early Middle Ages. It discusses different types of inks, the Methods of their detection and their use in different times and geographical areas. KW - Material analysis KW - Writing inks KW - Ink fingerprint PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-528057 DO - https://doi.org/10.1163/9789004444805_006 SP - 70 EP - 78 PB - Brill CY - Leiden AN - OPUS4-52805 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weber, Gert A1 - Bschorr, T. A1 - Cramer, H. A1 - Hahn, Oliver A1 - Rethmeier, Michael A1 - Thommes, H. ED - da Silva, L.F.M. ED - Altenbach, H. T1 - Hybrid bonding of advanced high strength steels in the lightweight body shell design for the automobile manufacturing N2 - In the lightweight body shell mass production of automobiles, the application of hybrid bonding techniques becomes more and more important. Especially the combination of adhesive bonding and resistance spot welding called weldbonding is of great importance. The target of this contribution is to show the influence of medium-viscosity and low-viscosity structural adhesives on the process reliability of the weldbonding process and the mechanical properties of the hybrid bonded joints. The given results are based on the application of an epoxy PUR-based, an epoxy resin-based and a rubber-based adhesive system for joining a mild and some different advanced high strength steels (AHSS). It will be shown that both the process reliability of the weldbonding process and the mechanical behaviour of the weldbonded joints are influenced by the combinations of the base metals, the applied adhesive systems and the choice of the joining parameters. The behaviour of the weldbonded joints will be studied under quasi-static and impact loads. The discussion of the metallurgical structure of the weldbonded joints depending on the joining parameters will be given, too. Furthermore, the fatigue behaviour of the weldbonded joints will be studied. KW - Advanced high strength steels KW - Hybrid bonding KW - Lightweight body shell design KW - Weldbonding process reliability KW - Weldbonded joint behaviour PY - 2010 SN - 978-3-642-12666-6 DO - https://doi.org/10.1007/978-3-642-12667-3_22 N1 - Serientitel: Advanced Structured Materials – Series title: Advanced Structured Materials VL - 3 SP - 343 EP - 372 PB - Springer AN - OPUS4-23150 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rabin, Ira ED - Andrews, T. L. ED - Macé, C. T1 - Ink identification to accompany digitalization of the manuscripts N2 - To date, the Geld of codicology (i.e., the study of manuscripts as physical objects) has not addressed the question of Chemical composition of writing materials. Recent advances in non-destructive testing provide us with tools for investigating physical and Chemical properties of manuscripts. Combining the expertise of codicologists and palaeographers with that of experimentalists in the fields of chemistry and physics may add a further valuable dimension to the study of manuscripts and their historical context. The color of inks (often characterized as brown, black, or gray) is not a suitable criterion for distinction and Identification, since its appearance is prone to changes due to variants resulting from production and to the phenomena of corrosion and aging. One of the goals of our research at the Bundesanstalt für Materialforschung und -prüfung in Berlin, Germany (BAM) is to work out a simple, mobile method for the typological Identification of various writing materials that cannot be differentiated by visual appearance alone. In the future, this method should be integrated into the procedure used to digitize manuscripts and make palimpsests visible. KW - Manuscripts KW - Iron gall ink PY - 2014 SN - 978-2-503-55268-2 SP - 293 EP - 307 PB - Brepols Publ. CY - Turnhout AN - OPUS4-34773 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hahn, Oliver T1 - Zerstörungsfreie Materialanalyse N2 - Naturwissenschaftliche Verfahren gewinnen zunehmend an Bedeutung bei der Untersuchung von Kunst und Kulturgut und bei der Entwicklung von Konservierungskonzepten zum Erhalt des kulturellen Erbes. Neben bildgebenden Verfahren wie der Computertomographie oder der Radiographie sind materialanalytische Verfahren von großer Wichtigkeit. Durch die Miniaturisierung elektronischer Bauteile kommen immer mehr mobile Untersuchungstechniken auf den Markt, so dass Kulturgüter vor Ort im musealen Kontext untersucht werden können. KW - Zerstörungsfreie Prüfung KW - Materialanalyse KW - Kunst- und Kulturgut PY - 2015 SN - 978-3-8062-3253-0 SP - 186 EP - 187 PB - LVR-LandesMuseum Bonn CY - Bonn AN - OPUS4-34614 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stege, Heike A1 - Hahn, Oliver ED - Geiger, Gisela ED - Bretz, Simone T1 - Möglichkeiten moderner Materialanalytik für die Untersuchung von Hinterglasbildern N2 - Materialanalytische Verfahren gewinnen zunehmend an Bedeutung bei der Beantwortung kulturhistorischer Fragestellungen, etwa nach Werkstatt, Alter, Künstler oder Provenienz eines Artefakts. Auch die Entwicklung geeigneter Restaurierungs- und Konservierungskonzepte bedarf dieser Grundlage ebenso wie die Beurteilung hinsichtlich der Frage nach Fälschung oder Kopie. Dem kunsttechnologisch orientierten Analytiker steht heute eine eindrucksvolle Bandbreite instrumenteller Methoden zur Verfügung, um die beiden Hauptkomponenten verwendeter Malfarben zu identifizieren, d.h. Farb- und Bindemittel. Der nachfolgende Aufsatz enthält eine kurze Zusammenstellung geeigneter Analyseverfahren, die üblicherweise bei der Untersuchung von Gemälden Verwendung finden. KW - Hinterglasmalerei KW - Kunsttechnologie KW - Kunst- und Kulturgut PY - 2017 SN - 978-3-86832-320-7 SP - 74 EP - 77 PB - Wienand Verlag CY - Köln AN - OPUS4-39324 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kromm, Arne A1 - Steppan, Enrico A1 - Kannengießer, Thomas ED - Kannengießer, Thomas ED - Babu, S. S. ED - Komizo, Y. ED - Ramirez, A.J. T1 - High-energy synchrotron study of the stress-strain behavior of hydrogen-charged high strength structural steel N2 - High strength structural steels are susceptible to hydrogen embrittlement. A critical combination of stress, amount of diffusible hydrogen and microstructure is believed to cause cold cracking. Especially during welding of high strength structural steels high tensile residual stresses may develop. Therefore, a feasibility study was conducted using synchrotron X-ray diffraction in order to analyze the stress–strain behavior during tensile loading. For that purpose two types of steel showing different hardening mechanisms were used. On the one hand a thermo-mechanically treated S1100MC and on the other hand a quenched and tempered S1300Q were chosen. The samples were electrochemically charged with hydrogen and subsequently stored in liquid nitrogen to prevent effusion. Tensile tests of the samples were conducted in a special load frame allowing for tilting the samples while applying constant loads. High energy synchrotron radiation was used for energy dispersive X-ray diffraction (EDXRD) analysis in transmission geometry. This method offers the possibility for measuring several diffraction lines of all contributing crystalline phases of the material. Strains as well as stresses applying the sin²ψ-method were determined for varying load situations. This feasibility study shows how the interaction of hydrogen and the stress/strain response may be assessed by diffraction methods. Examples are presented showing that hydrogen alters the load distribution as well as the strain behavior between different lattice planes in high strength steels. KW - High energy synchrotron radiation KW - Energy dispersive X-ray diffraction (EDXRD) KW - High strength structural steels KW - Tensile tests KW - Hydrogen embrittlement PY - 2014 SN - 978-3-319-06144-3 SN - 978-3-319-06145-0 DO - https://doi.org/10.1007/978-3-319-06145-0_10 SP - 165 EP - 176 PB - Springer AN - OPUS4-31356 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dabah, Eitan A1 - Griesche, Axel A1 - Beyer, Katrin A1 - Solórzano, E. A1 - Kannengießer, Thomas ED - Kannengießer, Thomas ED - Babu, S. S. ED - Komizo, Y. ED - Ramirez, A.J. T1 - In situ measurements of hydrogen diffusion in duplex stainless steels by neutron radiography N2 - Hydrogen embrittlement (HE) is a widely known phenomenon and under investigation already for more than a century. This phenomenon, though thoroughly studied, is not yet completely understood, and so far, there are several suggested mechanisms that try to explain the occurrence of HE. One important factor of understanding the HE phenomenon and predicting hydrogen-assisted failure is the descent knowledge about the hydrogen transport behaviour in the material. Neutron radiography is a proven method for tracking hydrogen diffusion and it was applied successfully in various research studies. In the presented study, we examined the hydrogen effusion behaviour in duplex stainless steel by means of neutron radiography and calculated the effective diffusion coefficient from the obtained transmission images. KW - Neutron radiography KW - Hydrogen diffusion KW - Duplex stainless steels KW - Hydrogen embrittlement PY - 2014 SN - 978-3-319-06144-3 SN - 978-3-319-06145-0 DO - https://doi.org/10.1007/978-3-319-06145-0_9 SP - 155 EP - 163 PB - Springer AN - OPUS4-31357 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hahn, Oliver A1 - Wilke, Olaf A1 - Jann, Oliver T1 - Characterization of air quality in museum show cases N2 - The present study comprises the characterisation of museum show cases concerning their hazardous potential for art objects. In order to estimate potential risks of damage the emission of volatile organic compounds coming from several construction materials is monitored and different air exchange rates from exhibit cases are determined. For the determination of the VOCs different methods were applied. The first step is a direct thermal extraction of the materials followed by emission test chamber measurements. The tracer gas method with N2O that is used in this study is a convenient procedure to investigate air exchange rates under working conditions greater than 0.05 d-1. The results of this study confirm the importance of the careful choice concerning building materials for show cases. Furthermore the analyses clarify that certain organic compounds might be a problem for the exhibits in show cases with low air exchange rates. T2 - Indoor Air 2005 CY - Beijing, PR China DA - 2005-09-04 KW - VOC KW - SVOC KW - Emission chamber test KW - Direct thermal extraction KW - Cultural heritage PY - 2005 SN - 7-89494-830-6 IS - 2 SP - 2269 EP - 2273 PB - Tsinghua University Press CY - Beijing AN - OPUS4-7602 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hahn, Oliver A1 - Wolff, Timo T1 - Zerstörungsfreie Mikro-Röntgenluoreszenzanalyse von historischen Schreib- und Zeichenmaterialien T2 - DGZfP Jahrestagung CY - Rostock, Deutschland DA - 2005-05-02 KW - Zerstörungsfreie Materialcharakterisierung KW - Mikro-RFA KW - Archäometrie PY - 2005 SN - 3-931381-64-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 94-CD SP - 1(?) EP - 7(?) PB - DGZfP CY - Berlin AN - OPUS4-7649 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hahn, Oliver A1 - Merchel, Silke A1 - Reiche, I. A1 - Simon, O. ED - Ketelsen, T. T1 - Zeichenmaterialien des 15. Jahrhunderts KW - Zerstörungsfreie Materialcharakterisierung KW - RFA KW - VIS-Spektroskopie KW - IR-Reflektographie KW - Archäometrie PY - 2005 SN - 3-422-06566-0 SP - 228 EP - 232 PB - Dt. Kunstverl. CY - München AN - OPUS4-7603 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rabin, Ira A1 - Hahn, Oliver A1 - Wolff, Timo A1 - Mantouvalou, I. A1 - Kanngießer, B. A1 - Weinberg, G. T1 - Dead sea scrolls - development of the analysis methodology T2 - Modern approaches to the conservation and accessibility of cultural and historic monuments CY - St. Petersburg, Russia DA - 2009-10-20 KW - Dead sea scrolls KW - Conservation science KW - Non destructive testing PY - 2010 SN - 978-5-8192-0370-5 SP - 122 EP - 129 AN - OPUS4-23329 LA - rus AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Baumer, Ursula A1 - Dietemann, Patrick A1 - Hahn, Oliver A1 - Obermeier, Andrea A1 - Stege, Heike A1 - Steger, Simon A1 - Steuer, Christoph A1 - Walcher, Jeanine ED - Geiger, Gisela ED - Bretz, Simone T1 - Die Malmaterialien der Hinterglasbilder Heinrich Campendonks N2 - Die Zusammensetzung der Malfarben Heinrich Campendonks in ihrer Kombination aus Farbpigmenten, Bindemitteln und Metallpulvern ist bislang nahezu unerforscht. Lediglich für wenige Leinwandgemälde des Künstlers liegen publizierte Untersuchungen zu den Farbmitteln vor. Materialanalysen zu den Hinterglasarbeiten des Malers fehlten bisher. Im Rahmen eines Forschungs- und Restaurierungsprojektes im Zeitraum von 2014 bis 2016 wurden naturwissenschaftliche Untersuchungen an ausgewählten Hinterglasbildern durchgeführt, deren Ergebnisse in diesem Aufsatz vorgestellten werden. Die Untersuchungen erfolgten zunächst nicht-invasiv mit VIS-Spektroskopie, Röntgenfluoreszenzanalyse sowie Ramanspektroskopie, weiterhin mit Licht- und Fluoreszenzmikroskopie, Rasterelektronenmikroskopie mit energiedispersiver Röntgenmikroanalyse, Fourier-Transformations-Infrarotspektroskopie, Raman-Mikroskopie und Gas-Chromatografie/Massenspektrometrie. KW - Hinterglasmalerei KW - Kunsttechnologie KW - Kunst- und Kulturgut PY - 2017 SN - 978-3-86832-320-7 SP - 78 EP - 89 PB - Wienand Verlag CY - Köln AN - OPUS4-39325 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rabin, Ira A1 - Schütz, Roman ED - Elgvin, Torleif ED - Langlois, Michael ED - Davis, Kipp T1 - Samples from the cylindrical jar MS 1655/1 N2 - The aim of our work was to check whether the assumption that the jar was discovered in Qumran can be substantiated. In order to establish the archaeological provenance of the jar we conducted a series of analytical tests on samples of material collected from the jar in April and June 2009. The samples were either found loose within the jar, these being probably constituted by remnants of its original contents, or were clay detached from the inner and outer surface of the jar. In addition, a portion of sand deposit coating the inside of the jar handles was analysed. KW - Archaeometry KW - Cultural heritage KW - Dead Sea scrolls PY - 2016 SN - 978-0-5671-1300-9 SN - 978-0-5672-8571-3 VL - 71 SP - 377 EP - 392 PB - Bloomsbury T&T Clark Series CY - New York, NY 10018 USA AN - OPUS4-39229 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bretz, Simone A1 - Walcher, Jeanine A1 - Hahn, Oliver A1 - Stege, Heike ED - Geiger, Gisela ED - Bretz, Simone T1 - Bronzen, Brokatbronzen, Metall- oder Brokatfarben. Metalleffektpigmente in der Hinterglasmalerei Heinrich Campendonks N2 - Eine maltechnische Eigenart der Hinterglasbilder Heinrich Campendonks liegt in der Verwendung von fein gemahlenen unedlen Metallen wie Kupfer, Zinn, Zink, Aluminium sowie Metalllegierungen wie Messing. Sie waren seinerzeit entweder in Pulverform oder als gebrauchsfertige Malfarben im Handel erhältlich und wurden meist Bronzen, vereinzelt auch Brokatbronzen, Metall- oder Brokatfarben genannt. Der Aufsatz stellt die wesentlichen Aspekte der Metalleffektpigmente in Campendonks Werk vor. KW - Hinterglasmalerei KW - Kunsttechnologie KW - Kunst- und Kulturgut PY - 2017 SN - 978-3-86832-320-7 SP - 90 EP - 95 PB - Wienand Verlag CY - Köln AN - OPUS4-39326 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brahms, I. A1 - Dietz, Georg A1 - Dietz, G.J. A1 - Edmondson, K. A1 - Eser, T. A1 - Hahn, Oliver A1 - Kosek, J. A1 - Singer, H. ED - Buck, S. ED - Porras, S. T1 - Art and Science: Analysing Dürer's early pen-and-ink drawings N2 - In a footnote to his first scholarly publication of 1915, Erwin Panofsky wrote that the use of “identical” ink positively “conipelled” him to believe that some scattered drawings by Dürer were definitely executed at the same time,around 1508.1 The question is, how far was Panofsky able to recognise the identity and similarity of the inks concerned,since such Classification by the human eye is discretionary by its very natu re? This essay presents new technical research undertaken collaboratively on Dürer’s early drawings in a number of leading collections of the artist’s work. The project aimed to contribute to particular questions, such as that presented by Panofsky above, but also to enrich our understanding of the young Dürer’s approach to the medium of drawing in general. KW - Albrecht Dürer KW - Drawings KW - Iron gall ink KW - X-ray fluorescence PY - 2013 SN - 978-1-907372-53-7 SN - 978-1-907372-51-3 SP - 89 EP - 105 PB - Paul Holberton publishing CY - London, UK AN - OPUS4-29658 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Cohen, Zina A1 - Olszowy-Schlanger, Judith A1 - Hahn, Oliver A1 - Rabin, Ira ED - Wandrey, T1 - Composition analysis of writing materials in Geniza fragments N2 - Our current projects focus on the material analysis of the writing materials kept in the Taylor-Schechter Collection at Cambridge University Library, which houses the largest collection of Cairo Geniza fragments, about 190,000. Although Geniza manuscripts have attracted a great deal of scholarly attention, the material aspects of these documents seem to have been largely neglected. The current study aims to obtain information on the composition of the writing supports and the inks that were used, the production of the original manuscripts and the history of their degradation. The collected data should supplement the description based on Hebrew palaeography and codicology. Moreover, a characterisation of the writing materials would provide insights on trade, local production techniques and social structures. The tabulated results have the potential to be used as geo-chronological markers if sufficient data is collected. For our study, we chose Hebrew legal documents and letters from three communities that co-existed in Fustat (today Cairo) in the 11th century: the Jerusalemite (or ‘Palestinian’) community, the Babylonian community and the Karaites, three different communities with different scribal traditions. In addition to this, we studied non-biblical scrolls attributed to the Palestinian and Babylonian communities. The question we addressed was whether we can correlate the use of a specific type of ink to an objective criterion. For our analysis at Cambridge University Library, we used a number of protocols developed at BAM (Bundesanstalt für Materialforschung und -prüfung) in Berlin and at the Centre for Study of Manuscript Cultures, University of Hamburg (CSMC). These include reflectographic examination followed by non-destructive X-ray fluorescence (XRF) analysis using transportable instruments so that the analysis can be carried out in situ. We have illustrated our approach here by providing two examples. The first one describes our investigation of the leather fragment containing a portion of the Babylonian Talmud on its hair side (TS Misc.26.53.17). The second example illustrates our ability to compare iron-gall inks using the XRF method. In this case, we explored the question of the codicological attribution of three fragments (TS F17.4, TS 12.755 and TS 12.756) to the same Talmud manuscript. KW - Cairo Genizah PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-435590 DO - https://doi.org/10.1515/9783110546422-013 VL - 13 SP - 323 PB - de Gruyter CY - Berlin AN - OPUS4-43559 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kemmlein, Sabine A1 - Hahn, Oliver A1 - Jann, Oliver A1 - Kalus, Sabine A1 - Stolle, Dirk ED - Levin, H. T1 - Emission of Flame Retardants from Consumer Products and Building Materials N2 - The emission levels of high boiling brominated (BFR) and phosphoric (POC) flame retardants (FR) in different materials were examined. For the determination of the emission rate the tests were done in different emission test chambers and cells under standard conditions (23 C, 50% RH and fixed area specific air flow rates). Selected products, e.g. printed circuit boards, were investigated at elevated temperature (e.g. 60 C) to simulate working conditions. Applied analytical techniques for the air samples adsorbed on polyurethane foam (PUF) are soxhlet and ultrasonic extraction. Different conditions were used to analyse the FR via GC-MS. Based on the first results it could be demonstrated that the emission depends on material density and surface condition. The concentrations over time obtained for tris(3-chloropropyl)-phosphate, e.g., from emission test chamber and cell show a good correlation, partly the measured concentration are different. Sampling at elevated temperature gives higher concentrations. T2 - 9th International Conference on Indoor Air Quality and Climate CY - Monterey, CA, USA DA - 2002-06-30 KW - Flame retardants KW - SVOC/POM KW - Material emission KW - Measurement methods PY - 2002 SN - 0-9721832-0-5 VL - 2 SP - 920 EP - 925 PB - International Academy of Indoor Air Sciences CY - Santa Cruz, Calif. AN - OPUS4-2001 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bretz, Simone A1 - Hahn, Oliver ED - Haindl, G. ED - Trepesch, C. T1 - Kunsttechnologische Studien über Johann Wolfgang Baumgartner, 'des Glasmahlens fürtrefflich wohl erfahren' mit einem Exkurs von Oliver Hahn zu Materialanalysen an ausgewählten Hinterglasbildern N2 - In der kunstreichen Stadt Augsburg wurde das Hinterglasgewerbe Ende des 17. Jahrhunderts eingefiihrt, setzte sich mit dem Hinterglasmaler Johann Wolfgang Baumgartner (1702 Ebbs, b. Kufstein -1761 Augsburg) in den Jahren 1733 bis 1746 fort, erfuhr ab der Mitte des 18. Jahrhunderts, besonders zwischen 17S0 und 1800, eine wahre Blüte, um Anfang des 19. Jahrhunderts langsam zu erlöschen. Augsburgs Hinterglasproduktion setzte im Vergleich zu benachbarten Städten spät ein, machte sich aber durch den umfänglichen Fernhandel einen großen Namen und die Stadt wurde zum führenden Zentrum des Handwerks. Mit seiner überzeugenden Umsetzung der grafischen Vorlagen in hintermalte Bildwerke hat Baumgartner einen entscheidenden Impuls zur Ansiedlung der Hinterglasmalerei gegeben. KW - Hinterglasmalerei KW - Zerstörungsfreie Prüfung PY - 2012 SN - 978-3-422-07137-7 SP - 60 EP - 73 PB - Deutscher Kunstverlag AN - OPUS4-27206 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kemmlein, Sabine A1 - Hahn, Oliver A1 - Jann, Oliver ED - Schartel, Bernhard T1 - Investigations on emissions of selected flame retardants. A possible route of exposure? T2 - 10th European meeting on fire retardancy and protection of materials/European conference on fire retardant polymers CY - Berlin, Germany DA - 2005-09-07 KW - Emission test chamber KW - Polybrominated flame retardants KW - Organophosphates PY - 2005 SN - 978-3-8334-8873-3 SP - 11_0_1 PB - Books on Demand GmbH CY - Norderstedt AN - OPUS4-10852 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kemmlein, Sabine A1 - Hahn, Oliver A1 - Jann, Oliver T1 - Suitability of emission test chambers and cells for measuring organophosphates and brominated flame retardants from insulation material T2 - Indoor Air 2005 CY - Beijing, PR China DA - 2005-09-04 KW - Emission measurements KW - Brominated flame retardants KW - Organophosphates PY - 2005 SN - 7-89494-830-6 VL - II IS - 2 SP - 2325 EP - 2328 PB - Tsinghua University Press CY - Beijing AN - OPUS4-10849 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bretz, Simone A1 - Hahn, Oliver ED - Johann Kronbichler, T1 - Kupfergrünpigment auf Holzasche-Glas - Hinterglasbilder aus Tirol vom 16. bis 18. Jahrhundert - technisch und naturwissenschaftlich untersucht T2 - Ausstellung "Verborgene Schätze" - Tiroler Hinterglasmalerei 1550 - 1850 CY - Brixen, Italien DA - 2009-08-15 KW - Kunst- und Kulturgut KW - Kunstgeschichte KW - Hinterglasmalerei PY - 2009 SN - 978-88-88570-13-6 SP - 209 EP - 229 CY - Brixen, Italien AN - OPUS4-19859 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Horn, Wolfgang A1 - Hahn, Oliver A1 - Jann, Oliver A1 - Kalus, Sabine ED - Wai, T. K. ED - Sekhar, C. ED - Cheong, D. T1 - Do particleboards produced with recycled wood contribute to indoor air pollution with biocides? T2 - 7th Healthy Buildings Conference ; HB 2003 ; ISIAQ international conference CY - Singapore, Republic of Singapore DA - 2003-12-07 KW - SVOC KW - Biocide KW - Chamber study KW - Material emission KW - Wood PY - 2003 SN - 981-049974-4 VL - 1 SP - 367 EP - 372 CY - Singapore AN - OPUS4-3419 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hahn, Oliver T1 - Untersuchung von Farbmitteln an Hinterglasbildern des 18./19. Jahrhunderts KW - Materialanalyse KW - Farbmittel KW - VIS-Spektrometrie PY - 2003 SN - 3-932276-15-9 SP - 107 EP - 110 PB - Schloßmuseum des Marktes Murnau CY - Murnau AN - OPUS4-2894 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reiche, I. A1 - Gadebusch, R. A1 - Hahn, Oliver A1 - Reinholz, Uwe A1 - Kanngießer, B. A1 - Malzer, W. T1 - Non-destructive investigations of Mughal Miniatures by a Combined Spectroscopic approach: PIXE, 3D-muXRF and UV-VIS spectroscopy KW - PIXE KW - 3D-micro-XRF KW - UV-VIS spectroscopy KW - Archaeometry KW - Cultural heritage PY - 2004 SN - 84-7820-848-8 SP - 4 pages PB - Fernando El Católico CY - Zaragoza AN - OPUS4-7495 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reiche, I. A1 - Gadebusch, R.D. A1 - Hahn, Oliver A1 - Reinholz, Uwe A1 - Kanngießer, B. A1 - Malzer, W. T1 - Non-destructive investigations of indian miniatures by a combined spectroscopic approach: Pixe, 3D-muXRF and UV-vis spectroscopy T2 - 34th International Sympsoium on Archaeometry CY - Zaragoza, Spain DA - 2004-05-03 PY - 2004 SN - 84-7820-848-8 SP - 333 EP - 339 PB - Fernando El Católico CY - Zaragoza AN - OPUS4-12362 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hahn, Oliver A1 - Reiche, I. A1 - Stege, H. ED - Beckhoff, B. T1 - Application in arts and archaeology KW - X-Ray Fluorescence KW - Archaeometry KW - Archaeology PY - 2006 SN - 3-540-28603-9 IS - Abschnitt 7.7 SP - 687 EP - 700 PB - Springer CY - Berlin AN - OPUS4-12631 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hahn, Oliver ED - Schubert, M. T1 - Zerstörungsfreie naturwissenschaftliche Untersuchung von historischem Schriftgut KW - Kulturgut KW - Archäometrie KW - Editionswissenschaften PY - 2010 SN - 978-3-11-023130-4 N1 - Serientitel: Schriftenreihe editio – Series title: Schriftenreihe editio IS - Sonderdruck zu editio 32 SP - 15 EP - 26 PB - De Gruyter AN - OPUS4-21068 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mair, Georg W. T1 - Probability of Fatigue of Carbon-Fibre Windings - Tests and Calculation Models Researching Input Data for Pressure Vessel Optimization T2 - 7th Bilateral Czech German symposium CY - Liblice Castle, Czech Republic DA - 1999-04-13 PY - 1999 SN - 80-8624602-7 SP - 55 CY - [S.l.] AN - OPUS4-6037 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mair, Georg W. ED - Rie, K.-T. ED - Portella, Pedro Dolabella T1 - The Low-Cycle Fatigue of Fibre-Metal-Hybrid Structures T2 - 4th International Conference on Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials CY - Garmisch-Partenkirchen, Germany DA - 1998-09-07 PY - 1998 SN - 0-08-043326-X PB - Elsevier CY - Amsterdam AN - OPUS4-6036 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mair, Georg W. A1 - Wiedemann, J. T1 - Hybridbauweisen - Beitrag zu den Möglichkeiten der Gewichtsreduzierung von metallischen Scheibentragwerken durch unidirektionale Faser-Verstärkung PY - 1991 SN - 0341-0587 N1 - Serientitel: ILR Mitt. – Series title: ILR Mitt. IS - 254 SP - 1 EP - 110 CY - Berlin AN - OPUS4-6019 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mair, Georg W. T1 - Schadenstolerante Hybrid-Druckbehälter - Die Gesamtzuverlässigkeit gegen Totalausfall als Auslegungskriterium PY - 1992 SN - 0341-0587 N1 - Serientitel: ILR Mitt. – Series title: ILR Mitt. IS - 272 SP - 1 EP - 89 PB - ILR CY - Berlin AN - OPUS4-6021 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mair, Georg W. A1 - Lübcke, H. T1 - Die Spannungsanalyse dickwandiger Metall-Hybridzylinder mit Faserarmierung PY - 1995 SN - 0341-0587 N1 - Serientitel: ILR Mitt. – Series title: ILR Mitt. IS - 296 SP - X, 1 EP - 59 PB - ILR CY - Berlin AN - OPUS4-6030 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mair, Georg W. T1 - Neue Aspekte des Risikomanagements von Fahrzeugen mit Gasantrieb N2 - Bei der Beurteilung der Sicherheitseigenschaften von Fahrzeugen steht die Sicherheit der Insassen im Vordergrund. Darüber hinaus ist die öffentlich-technische Sicherheit, das heißt die Sicherheit unbeteiligter Dritter, von mindestens gleicher Bedeutung. Es werden die Begriffe „Konsequenz“, „Risiko“ und „Sicherheit“ analysiert und Aspekte der öffentlich-technischen Sicherheit zu erläutern. Darauf aufbauend wird das worst-case- Konsequenzpotential gasbetriebener Fahrzeuge kurz dargestellt. Es wird insbesondere der Aspekt der Crashbelastungen auf Speicher mit metallischem Linern und ihre Interaktion mit dem Fahrzeug analysiert. Hierzu gehören auch die Analyse der Eintrittswahrscheinlichkeiten, der Festigkeiten von Speichersystemen und der technischen Maßnahmen zur Vermeidung von worst-case-Szenarien. Im letzten Drittel des Vortrages wird schlaglichtartig auf die Vorteile eines umfassenden probabilistischen Zulassungsansatzes eingegangen, der es gestatten würde, die Speicherund Speichersystemeigenschaften direkt auf die Nutzerprofile auszurichten. Damit würde es auch möglich, das Risiko eines Gasfahrzeuges im Sinne der öffentlich-technischen Sicherheit gezielt zu steuern und sich von pauschalen Sicherheitsbeiwerten unabhängig zu machen. Dieser Zulassungsansatz würde einen höheren Prüfaufwand bedeuten, böte aber erhebliches Einsparungspotential in den Stückkosten bei größeren Serien. T2 - 7. VDI-Tagung Fahrzeugsicherheit CY - Berlin, Deutschland DA - 2009-10-22 KW - Risiko KW - Betriebsfestigkeit KW - Lastwechselversuche KW - Crash KW - Brand KW - Probabilistischer Ansatz KW - Öffentlich-technische Sicherheit PY - 2009 SN - 978-3-18-092078-8 VL - 2078 SP - 1 EP - 14 AN - OPUS4-20454 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stähler, S. A1 - Niederleithinger, Ernst A1 - Pirskawetz, Stephan A1 - Nowak, Thomas Rudolf A1 - Weise, Frank ED - Sens-Schönfelder, Christoph ED - Ritter, Joachim ED - Wegler, Ulrich ED - Große, Christian T1 - Detection of subtle changes in materials by Coda Wave interferometry T2 - Noise and diffuse wavefields workshop CY - Neustadt an der Weinstraße, Germany DA - 2009-07-05 KW - Coda wave interferometry Beton KW - Schädigung KW - Ultraschall-Transmission PY - 2009 SN - 978-3-00-027952-2 SN - 0947-1944 VL - II SP - 59 EP - 61 AN - OPUS4-20574 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Taffe, Alexander T1 - Concept for a reference pile testing site for the development and improvement of NDT-CE N2 - Pile testing as a NDT-CE (non-destructive-testing in civil engineering) method provides information about the condition of foundations. It is also used as a tool for quality control. Real size test fields with sound piles, piles with flaws and piles connected with a foundation allow calibration of measurement devices and method comparison under "real" conditions. Such a site is planned on a BAM testing area south of Berlin. The joint use facilitates the establishment of the testing site as a national or European reference site. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/v026/v026.htm SN - 3-931381-49-8 SP - 1 EP - 6(?) PB - DGZfP CY - Berlin AN - OPUS4-2757 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Klingmüller, O. A1 - Schallert, M. A1 - Bobbe, A. ED - Petrukhin, V.P. ED - Ulitsky, V.M. ED - Kolybin, I.V. ED - Lisyuk, M.B. ED - Kholmyansky, M.L. T1 - Quality assurance of a secant pile wall using three different non-destructive test methods T2 - International geotechnical conference "Geotechnical challenges in megacities" CY - Moscow, Russia DA - 2010-06-07 KW - Bohrpfahlwand KW - Integritätsprüfung KW - Ultraschallmethode KW - Parallel Seismik KW - Pile wall KW - Integrity testing KW - Cross-hole sonic logging KW - Parallel seismics PY - 2010 SN - 978-5-9902005-2-4 VL - 3 SP - 1131 EP - 1136 PB - GRF AN - OPUS4-21620 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rethmeier, Michael A1 - Gumenyuk, Andrey A1 - Gook, Sergej T1 - Weldability of thick walled low carbon steels using high power laser hybrid welding T2 - 73rd Laser materials processing conference CY - Osaka, Japan DA - 2010-05-25 PY - 2010 SN - 978-4-947684-74-5 SP - 3 EP - 18 AN - OPUS4-21399 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Quiroz Penaranda, Vanessa A1 - Gebhardt, Moritz Oliver A1 - Gook, Sergej A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Hot cracking in high power laser beam welding of thick high strength structural steels under restraint conditions T2 - ICALEO 2010 - 29th International Congress on Applications of Lasers & Electro-Optics CY - Anaheim, CA, USA DA - 2010-09-26 KW - High power laser beam welding KW - Solidification crack KW - Hot crack KW - Instrumented restrained cracking test PY - 2010 SN - 978-0-912035-61-1 VL - 103 IS - Pub #613 / Paper 509 SP - 225 EP - 232 AN - OPUS4-22229 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Caron, J. A1 - Heinze, Christoph A1 - Schwenk, Christopher A1 - Rethmeier, Michael A1 - Babu, S. S. A1 - Lippold, J. ED - Cerjak, H. ED - Enzinger, N. T1 - Sensitivity analysis of martensite transformation temperatures with respect to numerical calculation of welding-induced residual stresses KW - Schweißsimulation KW - Eigenspannungen KW - Martensitbildung KW - Sensivitätsanalyse KW - Sysweld KW - Welding simulation KW - Residual stresses KW - Martensite kinetic KW - Sensitivity analysis PY - 2010 SN - 978-3-85125-127-2 SP - 215 EP - 238 PB - Verlag der Technischen Universität Graz AN - OPUS4-23008 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schwenk, Christopher A1 - Rethmeier, Michael ED - Cerjak, H. ED - Enzinger, N. T1 - Structured approach for a transient 3D numerical welding simulation KW - Numerical welding simulation KW - Experimental validation KW - Temperature field KW - Welding distortion KW - Residual stress PY - 2010 SN - 978-3-85125-127-2 SP - 901 EP - 917 PB - Verlag der Technischen Universität Graz AN - OPUS4-23153 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Heinze, Christoph A1 - Schwenk, Christopher A1 - Rethmeier, Michael T1 - Experimentelle und numerische Analyse des Geometrieeinflusses auf den Schweißeigenspannungszustand N2 - Die vorliegende Arbeit stellt Untersuchungen im Rahmen eines Forschungsprojektes mit Schwerpunkt in der experimentellen und numerischen Analyse schweißbedingter Eigenspannungen und Verzüge beim Mehrlagenschweißen dar. Das Auftreten von kritischen Eigenspannungszuständen und untolerierbaren Verzügen während des Fertigungsprozesses verursacht durch erforderliche Nacharbeiten, wie z.B. Richten oder Wärmenachbehandlungen, zusätzliche Kosten. Diese Nacharbeiten können vermieden werden, wenn die numerische Schweißsimulation auf der Grundlage von zuverlässigen Berechnungsergebnissen zur Optimierung angewandt wird. Die Analyse des Eigenspannungszustandes erfolgt an 5 mm dicken Blechen des unlegierten Baustahls S355J2, wobei Stumpfnaht-Verbindungen mittels Metall-Aktiv-Gas-(MAG)-Schweißen ausgeführt worden sind. Im Zusammenhang mit den Experimenten werden sowohl Temperaturzyklen und Eigenspannungen gemessen als auch Schmelzbadgeometrie und Mikrostruktur ermittelt. Auf der Basis eines experimentell validierten Temperaturfeldes und umfangreichen röntgenografischen Eigenspannungsuntersuchungen erfolgen numerische Strukturberechnungen. Die auftretenden Phasenumwandlungen werden in der Simulation berücksichtigt. Die Betrachtung verschiedener Blechkonfigurationen gibt den Einfluss der Blechlänge auf das Niveau der entstehenden Eigenspannungen wieder. Es stellt sich heraus, dass sich die Quereigenspannungen in den nahtnahen Bereich mit zunehmender Blechlänge in den Druckbereich verschieben. Dieses Verhalten kann durch die experimentell validierte Struktursimulation des vorliegenden Prozesses numerisch abgebildet werden und schafft somit den Ausgangspunkt für die spätere Berechnung von mehrlagigen Schweißnähten. T2 - SYSWELD Forum 2009 CY - Weimar, Deutschland DA - 2009-10-22 KW - Schweißsimulation KW - Eigenspannungen KW - Geometrie KW - Validierung KW - Sysweld PY - 2009 SN - 978-3-86068-401-6 SP - 62 EP - 74 PB - Universitätsverlag Weimar AN - OPUS4-20674 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wunderlich, C. A1 - Fischer, J. A1 - Niederleithinger, Ernst A1 - Schallert, M. A1 - Klingmüller, O. T1 - Auswertung von Ringversuchen zur Vergleichbarkeit von Pfahlintegritätsprüfungen T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - Bohrpfähle KW - Ringversuch KW - Integritätsprüfung PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 SP - 1 EP - 8 CY - Berlin AN - OPUS4-20978 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weber, Gert A1 - Gaul, Holger A1 - Rethmeier, Michael ED - Kolleck, R. T1 - Joining of ultra high strength steels for lightweight body shell design in automobile manufacturing T2 - 50th IDDRG anniversary conference - Tools and technologies for the processing of ultra high strength steels CY - Graz, Austria DA - 2010-05-31 KW - Advanced high strength steels KW - Resistance spot welding KW - Weldbonding KW - Lightweight body shell design KW - Process reliability PY - 2010 SN - 978-3-85125-108-1 DO - https://doi.org/10.3217/978-3-85125-108-1-094 SP - 885 EP - 898 PB - Verlag der Technischen Universität Graz CY - Graz, Austria AN - OPUS4-22472 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gook, Sergej A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Weld seam formation and mechanical properties of girth welds performed with laser-GMA-hybrid process on pipes of grade X65 T2 - ICALEO 2010 - 29th International Congress on Applications of Lasers & Electro-Optics CY - Anaheim, CA, USA DA - 2010-09-26 KW - High-power laser KW - Fiber laser KW - Pipeline KW - Hybrid welding KW - Girth welding PY - 2010 SN - 978-0-912035-61-1 VL - 103 IS - Pub #613 / Paper 202 SP - 62 EP - 69 AN - OPUS4-22232 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Tronicke, J. T1 - Travel-time inversion of parallel-seismic data for foundation length estimation T2 - Near Surface 2010 - 16th European Meeting of Environmental and Engineering Geophysics CY - Zurich, Switzerland DA - 2010-09-06 KW - Parallel Seismik KW - Fundamente KW - Pfähle KW - Inversion KW - Simulated annealing KW - Levenberg-Marquardt PY - 2010 SN - 978-90-73781-88-7 IS - P08 SP - 1 EP - 5 AN - OPUS4-22544 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gook, Sergej A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Laser-GMA-hybrid welding of large diameter pipes of grade X65 T2 - 2nd South-east european IIW international congress - "Welding - high-tech technology in the 21st century" CY - Sofia, Bulgaria DA - 2010-10-21 KW - High-power laser KW - Fiber laser KW - Pipeline KW - Hybrid welding KW - Girth welding PY - 2010 SN - 978-954-9322-25-5 SP - 139 EP - 144 AN - OPUS4-22720 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Niederleithinger, Ernst A1 - Milmann, Boris A1 - Wöstmann, Jens A1 - Röllig, Mathias A1 - Feldmann, Rüdiger A1 - Täljsten, B. ED - Masoud Motavalli, T1 - Near surface mounted CFRP-rods - preparation of reinforcing measures and quality control by means of non-destructive testing T2 - 4th International Conference on FRP Composites in Civil Engineering (CICE2008) CY - Zurich, Switzerland DA - 2008-07-22 PY - 2008 SN - 978-3-905594-50-8 SP - 1 EP - 6 AN - OPUS4-17747 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Sabine A1 - Niederleithinger, Ernst A1 - Krause, Martin A1 - Bohlen, T. T1 - Reverse time migration: A seismic imaging technique applied to ultrasound data T2 - NDE/NDT for highways and bridges - Structural materials technology (SMT) CY - New York, USA DA - 2010-08-16 KW - Ultraschall KW - Rekonstruktion KW - Migration PY - 2010 SN - 978-1-57117-211-2 SP - 554 EP - 559 CY - Columbus, OH, USA AN - OPUS4-22543 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Meggyes, Tamás A1 - McDonald, C. A1 - Roehl, K. E. A1 - Witt, K. J. A1 - Debreczeni, Á. T1 - TAILSAFE - Investigation and improvement of tailings facilities N2 - Improperly built or managed tailing dams pose major risks to human lives and the environment. Research for risk reduction by new technologies including slurry handlings, stochastic modelling, development of a parameter framework as well as work on legislation and authorisation procedures will be done in the EC-funded project TAILSAFE. Focus of this paper is on geophysial techniques for structure investigation and monitoring. T2 - 13th European Conference on Soil Mechanics and Geotechnical Engineering ; 13e Congrès Européen de Mécanique des Sols et de la Géotechnique CY - Prague, Czech Republic DA - 2003-08-25 KW - Tailing dams KW - Hazards KW - Geotechnics KW - Stochastics KW - Geophysics KW - Monitoring PY - 2003 SN - 80-8676904-6 N1 - Serientitel: DGZfP-Proceedings BB – Series title: DGZfP-Proceedings BB IS - 85-CD SP - 179 EP - 182 CY - Praha AN - OPUS4-2758 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Niederleithinger, Ernst A1 - Stoppel, Markus A1 - Wiggenhauser, Herbert ED - Mencik, J. T1 - The role of advanced non-destructive techniques in condition assessment of existing bridges T2 - 2nd International Conference "Reliability, Safety and Diagnostics of Transport Structures and Means 2005" CY - Parduce, Czech Republic DA - 2005-07-07 KW - Condition assessment KW - Non-destructive testing (NDT) KW - Scanning system KW - Impulse radar KW - Ultrasonic echo KW - Impact echo KW - Active thermography KW - LIBS PY - 2005 SN - 80-7194-769-5 SP - 111 EP - 118 PB - University of Pardubice CY - Pardubice AN - OPUS4-7695 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tölle, Florian A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael A1 - Backhaus, A. A1 - Olschok, S. A1 - Reisgen, U. T1 - Eigenspannungsreduzierung in Elektronen- und Laserstrahlschweißnähten mittels nachlaufender Wärmefelder durch schnelle Strahldefokussierung und -ablenkung N2 - Schweißeigenspannungen - im Besonderen infolge von Strahlschweißprozessen - annähernd der werkstoffspezifischen Streckgrenze können durch eine mögliche Spannungsrelaxation oder verstärkte Spannungsrisskorrosion lebensdauerreduzierende Konsequenzen mit sich ziehen. Aus diesem Grund wurden viele Verfahren entwickelt, welche diese Eigenspannungen reduzieren können. Jedoch sind diese Verfahren kostenintensiv oder nur für breite Schweißnähte und einfache Bauteilgeometrien anwendbar. Die in dieser Arbeit dargestellte Methode nutzt den Schweißstrahl für den Schweißprozess sowie in defokussierter Form für eine thermische Nachbehandlung des Bauteils. Hierfür läuft der defokussierte Strahl durch hochfrequente Strahlablenkung beidseitig der Schweißnaht mit einer bestimmten zeitlichen Distanz dem Schmelzbad nach und wird zum Aufheizen dieser Materialbereiche genutzt. Mit dieser Prozedur ist es möglich die Spannungen in schmalen Schweißnähten mit großen Spannungsgradienten im Vergleich zu anderen spannungsreduzierenden Verfahren ohne Kontaktflächen oder zusätzlichem Equipment effizient zu reduzieren. Abhängig von der Bauteilgeometrie und der Strahlleistung können unterschiedliche Prozessparameter für dieses Verfahren angewandt werden. Es werden die Mechanismen der Eigenspannungsreduzierung in diesem Prozess und deren Abhängigkeit von den Prozessparametern anhand von Ergebnissen aus FEM-Simulationen diskutiert. Zudem wird in einer Reihe von experimentellen Ergebnissen die Anwendbarkeit von bereits für lineare Schweißnähte ermittelte Verfahrensparameter auf axiale und radiale Rundnähte nachgewiesen. Hierbei zeigen die besten experimentellen Ergebnisse für Elektronenstrahl- sowie für Laserstrahlschweißnähte Spannungsreduktionen größer als 90 %. T2 - DVS Congress 2011 - Große Schweißtechnische Tagung CY - Hamburg, Deutschland DA - 27.09.2011 PY - 2011 SN - 978-3-87155-267-0 VL - 275 SP - 465 EP - 471 PB - DVS Media GmbH CY - Düsseldorf AN - OPUS4-24545 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Weller, Andreas T1 - SIP: Messung des komplexen elektrischen Widerstandes von Beton und Mauerwerk - Ansätze zu einer neuen Prüfmethode N2 - Zusammenfassung In der Geophysik wird seit einiger Zeit das Verfahren der "Spektralen Induzierten Polarisation (SIP)"eingesetzt, um nähere Informationen über die Art, die Struktur und den Zustand des Bodens zu erhalten. Die Methode beruht auf der Messung des komplexen spezifischen elektrischen Widerstands im Frequenzbereich zwischen 1 mHz und 10 kHz. Die SIP kann neue Möglichkeiten beim Einsatz elektrischer Verfahren in der Bauwerksuntersuchung eröffnen. So lassen sich beispielsweise Materialunterschiede von Feuchteinhomogenitäten trennen, was mit konventioneller Widerstandsmessung nicht möglich ist. Ebenfalls denkbar ist eine Detektion kontaminierter Bereiche (z. B. bei starker Belastung durch organische Substanzen oder Salze) im Mauerwerk. Vorgestellt werden das Verfahrensprinzip, die Messtechnik und erste Ergebnisse von Messungen an Mauerwerksziegeln. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Bauwesen KW - Elektrik KW - Spektrale Induzierte Polarisation KW - Feuchtigkeit KW - Mauerwerk PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v47/v47.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1821 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Brink, Arne A1 - McDonald, C. A1 - Meggyes, Tamás A1 - Roehl, K. E. A1 - Witt, K. J. T1 - TAILSAFE - Investigation and improvement of tailings facilities N2 - Tailings are the fine residue of the milling process in the mining industry and appear in slurry form being mixed with water during this process. Large tailings ponds are required to contain them, usually confined by man-made dams. Such tailings facilities pose considerable risk both to the environment and human lives. A major interdisciplinary research project ('TAILSAFE') supported by European Union has been initiated with the aim to increase attention towards and reduce the risk posed by tailings facilities. Methods of parameter evaluation and measurement are being developed within the project and applied for the detection, assessment and improvement of the safety state of tailings dams and ponds. One of the workpackages has his focus on non-destructive geophysical investigation methods. Geoelectrical (SIP), seismic and radar methods will be used to get information on the tailings dam structure and water content. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/p014/p014.htm SN - 3-931381-49-8 SP - 1 EP - 6(?) PB - DGZfP CY - Berlin AN - OPUS4-2756 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst T1 - Spectral Induced Polarization - a Tool for Non-Destructive Testing of Soils and Building Materials N2 - The Spectral Induced Polarization (SIP) is a newly developed non-destructive geophysical method. It is an extension of conventional electrical resistivity measurements. By measuring additional parameters a more detailed investigation of the subsurface is possible. Up to now SIP is mainly used in mineral exploration, but the number of application examples from near surface geophysics and civil engineering is increasing. Results are presented from the investigation of slag heaps and measurements on bricks. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/v060/v060.htm SN - 3-931381-49-8 SP - 1(?) EP - 8(?) PB - DGZfP CY - Berlin AN - OPUS4-2755 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Taffe, Alexander A1 - Behrens, Matthias ED - Stahlmann, J. T1 - RUFUS - Re-Use of Foundations on Urban Sites - Ein EU-Projekt zur Wiedernutzung von Fundamenten T2 - 7. Pfahl-Symposium CY - Braunschweig, Deutschland DA - 2003-02-20 PY - 2003 SN - 3-927610-62-3 N1 - Serientitel: Mitteilung des Instituts für Grundbau und Bodenmechanik - Technische Universität Braunschweig – Series title: Mitteilung des Instituts für Grundbau und Bodenmechanik - Technische Universität Braunschweig IS - 71 SP - 1(?) EP - 2(?) CY - Braunschweig AN - OPUS4-2761 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Taffe, Alexander ED - Stahlmann, J. T1 - Horstwalde - Konzeption für einen Teststandort zur Pfahlprüfung T2 - 7. Pfahl-Symposium CY - Braunschweig, Deutschland DA - 2003-02-20 PY - 2003 SN - 3-927610-62-3 N1 - Serientitel: Mitteilung des Instituts für Grundbau und Bodenmechanik - Technische Universität Braunschweig – Series title: Mitteilung des Instituts für Grundbau und Bodenmechanik - Technische Universität Braunschweig IS - 71 SP - 1(?) EP - 6(?) CY - Braunschweig AN - OPUS4-2760 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kruschwitz, Sabine A1 - Niederleithinger, Ernst A1 - Behrens, Matthias A1 - Mittag, Kornelia T1 - Zerstörungsfreie Strukturuntersuchung von Spülhaldendämmen mittles SIP T2 - Jahrestagung Deutsche Geophysikalische Gesellschaft (DGG) CY - Graz, Österreich DA - 2005-02-21 KW - Spektrale Induzierte Polarisation KW - Spülhalden KW - Dammstabilität PY - 2005 SN - 0344-7251 SP - 113 EP - 114 PB - DGG CY - wechselnde Verlagsorte AN - OPUS4-7214 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kruschwitz, Sabine A1 - Niederleithinger, Ernst T1 - Spektrale Induzierte Polarisation zur Charakterisierung von Baumaterial T2 - Jahrestagung Deutsche Geophysikalische Gesellschaft (DGG) CY - Graz, Österreich DA - 2005-02-21 KW - Spektrale Induzierte Polarisation KW - Baumaterial KW - Holz KW - CNM KW - Hg-Porosimetrie PY - 2005 SN - 0344-7251 SP - 296 EP - 297 PB - DGG CY - wechselnde Verlagsorte AN - OPUS4-7215 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Taffe, Alexander A1 - Behrens, Matthias T1 - Pfahlprüfung - Grenzbereich zwischen Bauingenieurwesen und Geophysik T2 - Jahrestagung Deutsche Geophysikalische Gesellschaft (DGG) CY - Graz, Österreich DA - 2005-02-21 KW - Fundamente KW - Bohrpfähle KW - Pfahlprüfung KW - Pfahlintegritätsprüfung KW - Parallel Seismic Verfahren KW - Geophysik PY - 2005 SN - 0344-7251 SP - 287 PB - DGG CY - wechselnde Verlagsorte AN - OPUS4-7239 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Krause, Martin A1 - Milmann, Boris A1 - Niederleithinger, Ernst ED - Alexander, M. T1 - Assessment of foundation slabs with US-echo in the re-use process N2 - During the re-use process of existing concrete memebers like foundations information about geometry and location of piles or strip foundation is necessary. Ultrasonic echo with a need of only one-sided access may provide this information and help the engineer to assess foundations. Cost effectiveness by the re-use of foundations gains an increasing economic role due to decreasing average economic lifetime of buildings on urban sites. Results of systematic ultrasonic echo investigations at a slab from 75 cm to 125 cm thickness with ten different reinforcement ratios are presented. The influence of the varying reinforcement ratio and thickness on the reliability of the results is shown. Available data-processing algorithms based on reconstruction calculation and imaging of results to reveal the geometry of a slab and the location of piles or strip foundations are introduced. Practical guidance for the application of ultrasonic echo and its limits are presented to ensure reliable results. T2 - International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR) CY - Cape Town, South Africa DA - 2006-11-21 KW - Ultraschallecho KW - Fundamentdicke KW - Bildgebende Darstellung KW - Wiedernutzung von Fundamenten KW - SAFT KW - ZfP im Bauwesen KW - Objektortung PY - 2006 SN - 0-415-39654-9 N1 - Serientitel: Balkema proceedings and monographs in engineering, water and earth sciences – Series title: Balkema proceedings and monographs in engineering, water and earth sciences SP - 525 EP - 530 PB - Taylor & Francis CY - London AN - OPUS4-11681 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kruschwitz, Sabine A1 - Niederleithinger, Ernst T1 - Multi-channel Spectral Induced Polarization (SIP) Measurements on Tailings Dams T2 - Near Surface 2005 CY - Palermo, Italy DA - 2005-09-05 KW - Spectral Induced Polarization KW - Tailings Facilities KW - Dam Stability KW - SASW PY - 2005 SN - 90-73781-91-4 SP - 4 pages PB - Co Productions CY - Houten AN - OPUS4-10911 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Helmerich, Rosemarie A1 - Wiggenhauser, Herbert ED - Cruz, P. ED - Frangopol, D. T1 - Trends in bridge condition assessment using non-destructive testing methods T2 - Bridge Maintenance, Safety, Management, Life-Cycle Performance and Cost CY - Porto, Portugal DA - 2006-07-16 KW - NDT KW - Condition assessment KW - Automation of measurement KW - Data fusion PY - 2006 SN - 0-415-40315-4 N1 - Serientitel: Balkema proceedings and monographs in engineering, water and earth sciences – Series title: Balkema proceedings and monographs in engineering, water and earth sciences SP - 933 EP - 934 PB - Taylor & Francis CY - London AN - OPUS4-14037 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Niederleithinger, Ernst ED - Butcher, A. ED - Powell, J. ED - Skinner, H. T1 - NDT investigation methods KW - Re-use of foundations KW - NDT KW - Pile integrity testing KW - Parallel seismic KW - Ultrasonic KW - Sustainability KW - Piles KW - Foundations PY - 2006 SN - 1-86081-938-9 N1 - Serientitel: Building Research Establishment X – Series title: Building Research Establishment X IS - 414 SP - 47 EP - 55 PB - IHS BRE Press CY - Bracknell AN - OPUS4-13925 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Helmerich, Rosemarie A1 - Streicher, Doreen ED - Vincentsen, L. T1 - NDT Methods for Condition Assessment of Railway Bridges T2 - International Association for Bridge and Structural Engineering (IABSE) Conference on Operation, Maintenance and Rehabilitation of Large Infrastructure Projects, Bridges and Tunnels CY - Copenhagen, Denmark DA - 2006-05-15 KW - Condition assessment KW - Non-destructive testing KW - Automation KW - Method combination PY - 2006 SN - 87-91044-03-0 SP - 1(?) PB - IABSE CY - Zürich AN - OPUS4-14038 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Taffe, Alexander T1 - Zerstörungsfreie Pfahl- und Fundamentprüfung im Hinblick auf Wiedernutzung T2 - DGZfP-Fachtagung Bauwerksdiagnose "Praktische Anwendungen Zerstörungsfreier Prüfungen" CY - Berlin, Deutschland DA - 2006-02-22 KW - Zerstörungsfreie Prüfung KW - Fundament KW - Pfahl KW - Platte KW - Ultraschall KW - Integritätsprüfung KW - Parallel Seismic PY - 2006 SN - 3-931381-71-4 SP - 1(?) EP - 8(?) PB - DGZfP CY - Berlin AN - OPUS4-14216 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Taffe, Alexander ED - Butcher, A. ED - Powell, J. ED - Skinner, H. T1 - Validation of NDT methods for foundation testing at the BAM site Horstwalde T2 - International Conference "Reuse of Foundations for Urban Sites" CY - Watford, England, UK DA - 2006-10-19 KW - NDT KW - Ultrasonics KW - Pile KW - Slab KW - Test site KW - Integrity testing KW - Parallel seismics PY - 2006 SN - 1-86081-938-9 N1 - Serientitel: Building Research Establishment X – Series title: Building Research Establishment X IS - 414 SP - 123 EP - 132 PB - IHS BRE Press CY - Bracknell AN - OPUS4-14214 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Taffe, Alexander ED - Butcher, A. ED - Powell, J. ED - Skinner, H. T1 - NDT methods in the foundation reuse process T2 - International Conference "Reuse of Foundations for Urban Sites" CY - Watford, England, UK DA - 2006-10-19 KW - NDT KW - Foundation KW - Pile KW - Slab KW - Ultrasonics KW - Integrity testing KW - Parallel seismics PY - 2006 SN - 1-86081-938-9 N1 - Serientitel: Building Research Establishment X – Series title: Building Research Establishment X IS - 414 SP - 115 EP - 122 PB - IHS BRE Press CY - Bracknell AN - OPUS4-14215 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Taffe, Alexander T1 - Improvement and Validation of Foundation NDT Methods T2 - NDE Conference on Civil Engineering CY - St. Louis, Missouri, USA DA - 2006-08-14 KW - Foundations KW - Piles KW - Slabs KW - NDT KW - Integrity testing KW - Ultrasonics KW - Parallel seismics PY - 2006 SN - 1-57117-148-7 SP - 506 EP - 512 PB - ASTM CY - St. Louis AN - OPUS4-14271 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bien, J. A1 - Helmerich, Rosemarie A1 - Kubiak, Z. A1 - Niederleithinger, Ernst T1 - Ocena Kondycji Starych Mostów Kolejowych Przy Uz.yciu Zaawansowanych Metod - Naukowa Wspólpraca Berlina i Wroclawia / Condition assessment of old railway bridges using advanced methods - scientific cooperation between Berlin and Wroclaw T2 - 160 Lat Polaczenia Kolejowego Wroclaw - Berlin / 160 Jahre Eisenbahnverbindung Berlin-Breslau Konferenz CY - Wroclaw, Poland DA - 2006-12-15 KW - Mosty kolejowe KW - Metody diagnostyczne KW - Metody zaawansowane KW - Historische Eisenbahnlinien KW - Infrastruktur KW - Erhaltung KW - Wissenschaftliche Zusammenarbeit PY - 2006 SN - 83-7085-995-X SP - 183 EP - 199 PB - Oficyna Wydawnicza Politechniki Wroclawskiej CY - Wroclaw AN - OPUS4-14456 LA - pol AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Helmerich, Rosemarie T1 - Sustainable Bridges - NDT as a Tool to Assist Railway Bridge Management T2 - NDE Conference on Civil Engineering CY - St. Louis, Missouri, USA DA - 2006-08-14 KW - Railways KW - Bridges KW - NDT KW - Condition assessment PY - 2006 SN - 1-57117-148-7 SP - 196 EP - 204 PB - ASTM CY - St. Louis AN - OPUS4-14436 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Helmerich, Rosemarie A1 - Casas, J. ED - Jan Bien, ED - Lennart Elfgren, ED - Jan Olofsson, T1 - New methods for inspection and condition assessment KW - Brücken KW - Inspektion KW - Monitoring KW - Zerstörungsfreie Prüfung KW - Eisenbahn PY - 2007 SN - 978-83-7125-161-0 SP - 83 EP - 91 PB - Dolnoslaskie Wydawnictwo Edukacyjne CY - Wroclaw, Poland AN - OPUS4-16182 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kruschwitz, Sabine A1 - Niederleithinger, Ernst T1 - Untersuchung voll- und teilgesättigter Baustoffe mit Spektral Induzierter Polarisation - Wege zu einem zerstörungsfreien Prüfungsverfahren? T2 - Workshop 2007 "Innovative Feuchtemessung in Forschung und Praxis" CY - Karlsruhe, Deutschland DA - 2007-10-17 KW - Spektral Induzierte Polarisation KW - Baumaterial KW - Feuchte KW - Salz KW - FD Modellierung PY - 2007 SN - 978-3-931681-91-3 SP - 149 EP - 155 PB - Aedificatio AN - OPUS4-16369 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schwenk, Christopher A1 - Rethmeier, Michael A1 - Dilger, K. A1 - Michailov, V. ED - H.K.D.H. Bhadeshia, ED - H. Cerjak, ED - E. Kozeschnik, T1 - Sensitivity Analysis of Welding Simulation Depending on Material Properties Value Variation PY - 2007 SN - 978-3-902465-69-6 SP - 1107 EP - 1128 CY - Graz, Austria AN - OPUS4-16488 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schwenk, Christopher A1 - Rethmeier, Michael A1 - Dilger, K. ED - H.K.D.H. Bhadeshia, ED - H. Cerjak, ED - E. Kozeschnik, T1 - Analysis of the transient deformation behaviour and numerical optimisation of an electron beam welded gearwheel PY - 2007 SN - 978-3-902465-69-6 SP - 1155 EP - 1166 CY - Graz, Austria AN - OPUS4-16490 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schwenk, Christopher A1 - Rethmeier, Michael A1 - Weiss, D. ED - H.K.D.H. Bhadeshia, ED - H. Cerjak, ED - E. Kozeschnik, T1 - Rapid generation of temperature fields for simulation of welding distortions PY - 2007 SN - 978-3-902465-69-6 SP - 835 EP - 846 CY - Graz, Austria AN - OPUS4-16491 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Niederleithinger, Ernst A1 - Trela, Christiane A1 - Bien, J. A1 - Bernardini, G. ED - Hyun-Moo Koh, ED - Dan M. Frangopol, T1 - Complex multi-tool inspection of a masonry arch bridge using non-destructive testing T2 - Bridge Maintenance, Safety, Management, Health Monitoring and Informatics - IABMAS 2008 CY - Seoul, South Korea DA - 2008-07-13 PY - 2008 SN - 978-0-415-46844-2 SP - 1 EP - 8 PB - CRC Press CY - Boca Raton AN - OPUS4-17744 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Dérobert, X. A1 - Hugenschmidt, J. A1 - Moczko, A. A1 - Niederleithinger, Ernst A1 - Taffe, Alexander ED - L. Binda, ED - M. di Prisco, ED - R. Felicetti, T1 - Benchmark for thickness measurement of concrete elements T2 - 1st International RILEM Conference, on Site Assessment of Concrete, Masonry and Timber Structures (SACoMaTiS 2008) CY - Varenna, Italy DA - 2008-09-01 KW - Thickness measurement KW - Radar KW - Ultrasonic Echo KW - Impact-Echo and Low Strain Techniques PY - 2008 SN - 978-2-35158-062-2 VL - 1 IS - PRO 59 SP - 357 EP - 366 PB - RILEM Publications AN - OPUS4-18030 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst ED - Jaime Alberto dos Santos, T1 - Numerical simulation of low strain dynamic pile tests T2 - 8th International Conference on the Application of Stress Wave Theory to Piles - Science, Technology and Practice CY - Lisbon, Portugal DA - 2008-09-08 KW - Pile integrity testing KW - Parallel seismic KW - Simulation KW - EFIT PY - 2008 SN - 978-1-58603-909-7 SP - 315 EP - 320 PB - IOS Press BV AN - OPUS4-17916 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst T1 - The Parallel Seismic Technique for Determination of Foundation Pile Length T2 - Near Surface 2008 - 14th European Meeting of Environmental and Engineering Geophysics (EAGE) CY - Kraków, Poland DA - 2008-09-15 KW - Piles KW - Parallel seismic KW - Length KW - Quality assurance PY - 2008 SN - 978-90-73781-56-6 SP - 1 EP - 5 AN - OPUS4-17917 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pittner, Andreas A1 - Schwenk, Christopher A1 - Rethmeier, Michael A1 - Weiß, D. ED - Hirata, Yoshinori ED - Manabu Tanaka, T1 - Automated generation of temperature fields for numerical welding simulation T2 - 8th International Welding Symposium - Innovations in Welding and Joining for a New Era in Manufacturing CY - Kyoto, Japan DA - 2008-11-16 KW - Welding simulation KW - Temperature Field Generation KW - Optimization KW - Neural Networks PY - 2008 SP - 158 PB - Japan Welding Society CY - Kyoto AN - OPUS4-18614 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kruschwitz, Sabine A1 - Niederleithinger, Ernst T1 - Assessment of salt and moisture stone damages using complex resistivity measurements T2 - International Conference on Salt Weathering on Buildings and Stone Sculptures CY - Copenhagen, Denmark DA - 2008-10-22 KW - Complex resistivity KW - Bricks KW - Sandstone KW - Salt decay KW - Moisture content PY - 2008 SN - 9788778772732 SP - 177 EP - 185 AN - OPUS4-18246 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gook, Sergej A1 - Gumenyuk, Andrey A1 - Stelling, Karen A1 - Lammers, Marco A1 - Rethmeier, Michael T1 - Schweißen im Dickblechbereich mit einem 20-kW-Faserlaser T2 - Große Schweißtechnische Tagung - BMBF-Forschungsförderung "Fügen im Produktlebenszyklus" - Studentenkongress CY - Dresden, Deutschland DA - 2008-09-17 PY - 2008 SN - 978-3-87155-256-4 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte VL - 250 SP - 264 EP - 270 PB - DVS Media GmbH CY - Düsseldorf AN - OPUS4-18706 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rethmeier, Michael A1 - Gook, Sergej A1 - Lammers, Marco A1 - Gumenyuk, Andrey ED - Hirata, Yoshinori ED - Manabu Tanaka, T1 - Laser-Hybrid Welding of Thick Plates up to 32 mm Using a 20 kW Fibre Laser T2 - 8th International Welding Symposium - Innovations in Welding and Joining for a New Era in Manufacturing CY - Kyoto, Japan DA - 2008-11-16 KW - Laser Beam Welding KW - High Power Fibre Laser KW - Laser-Hybrid Welding PY - 2008 SP - 43 PB - Japan Welding Society CY - Kyoto AN - OPUS4-18679 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gook, Sergej A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael ED - Ostendorf, A. ED - T. Graf, ED - D. Petring, ED - Otto, A. T1 - Orbital laser-hybrid welding of pipelines using a 20 kW fibre laser T2 - 5th International WLT-Conference on Lasers in Manufactoring CY - Munich, Germany DA - 2009-06-15 KW - High power fibre laser KW - Laser-hybrid welding KW - Pipeline KW - Thick plates KW - Orbital process PY - 2009 SN - 978-3-00-027994-2 SP - 65 EP - 70 PB - AT-Fachverl. CY - Stuttgart AN - OPUS4-19593 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lorenz, Stephan A1 - Kannengießer, Thomas A1 - Michael, Thomas A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael A1 - Posch, G. T1 - Laserstrahl-MSG-Hybridschweißen mit hochlegierten Massiv- und Fülldrahtelektroden T2 - Die Verbindungs Spezialisten 2009 - Große Schweißtechnische Tagung CY - Essen, Deutschland DA - 2009-09-14 KW - Laserstrahl-MSG-Hybridschweißen KW - Hochlegiert KW - 1.4306 KW - AISI 304L KW - Positionsschweißen KW - Metastabiler austenitischer Chrom-Nickel-Stahl KW - Metallurgie PY - 2009 SN - 978-3-87155-584-8 VL - 258 SP - 75 EP - 80 PB - DVS Media GmbH CY - Düsseldorf AN - OPUS4-20107 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Wiggenhauser, Herbert A1 - Taffe, Alexander T1 - The NDT-CE test and validation center in Horstwalde T2 - NDTCE ´09 - 7th International symposium on nondestructive testing in civil engineering CY - Nantes, France DA - 2009-06-30 KW - Foundations KW - Bridges KW - Piles KW - Slabs KW - Integrity KW - Ultrasonics KW - Parallel seimics PY - 2009 SN - 978-2-7208-2542-5 SN - 1628-4704 SP - 1 EP - 6 AN - OPUS4-20140 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kruschwitz, Sabine A1 - Niederleithinger, Ernst T1 - Complex resistivity tomography in laboratory and field studies - a promising NDT tool T2 - NDTCE ´09 - 7th International symposium on nondestructive testing in civil engineering CY - Nantes, France DA - 2009-06-30 KW - Electrical resistivity KW - Moisture KW - Salt KW - Damage PY - 2009 SN - 978-2-7208-2542-5 SN - 1628-4704 SP - 1 EP - 6 AN - OPUS4-20141 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kruschwitz, Sabine A1 - Niederleithinger, Ernst A1 - Trela, Christiane A1 - Wöstmann, Jens T1 - Complex resistivity (CR) behavior of building material - first results of field scale measurements T2 - Near Surface 2008 - 14th European Meeting of Environmental and Engineering Geophysics (EAGE) CY - Kraków, Poland DA - 2008-09-15 KW - Building materials KW - Damage KW - Non-destructive testing KW - Complex resistivity PY - 2008 SN - 978-90-73781-56-6 SP - 1 EP - 4 AN - OPUS4-17908 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Krause, Martin A1 - Niederleithinger, Ernst A1 - Wiggenhauser, Herbert T1 - Non-destructive testing methods at BAM for damage assessment and quality assurance in civil engineering N2 - The structural safety, durability and performance of the infrastructure is of primary interest in every country. An efficient system for early and regular structural assessment as well as for quality assurance during and after the construction of new structures and of reconstruction processes is urgently required. At BAM, NDT methods to be applied in civil engineering are developed and their application improved. From the experience of on-site assessments, quality assurance systems and methodologies for regular inspections are elaborated. This work is mainly performed in the frame of externally funded research projects. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 KW - Non-destructive testing in civil engineering KW - Radar KW - Ultrasonics KW - Impact-echo KW - Impulse thermography KW - Concrete KW - Masonry PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/v068/v068.htm SN - 3-931381-49-8 PB - DGZfP CY - Berlin AN - OPUS4-3160 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Hübner, M. A1 - Amir, J. M. A1 - Müller, H. T1 - Qualitätssicherung von Pfahlwänden mit der Ultraschallmethode - eine Machbarkeitsstudie T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - Bohrpfahlwand KW - Ultraschallmethode PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 SP - 1 EP - 9 CY - Berlin AN - OPUS4-20979 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bohse, Jürgen A1 - Mair, Georg W. A1 - Novak, Pavel ED - Pullin, R. ED - Holford, M. T1 - Acoustic emission testing of high-pressure composite cylinders T2 - 27th European Conference on Acoustic Emission Testing (EWGAE 2006) CY - Cardiff, Wales, UK DA - 2006-09-20 KW - Composite calinders KW - Pressure equipment KW - Damage analysis PY - 2006 SN - 0-87849-420-0 N1 - Serientitel: Advances materials research – Series title: Advances materials research IS - 13-14 SP - 267 EP - 272 PB - Trans Tech Publ. CY - Zürich AN - OPUS4-13865 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Streicher, Doreen A1 - Algernon, Daniel A1 - Behrens, Matthias A1 - Wöstmann, Jens A1 - Wiggenhauser, Herbert A1 - Petz, J. T1 - Zerstörungsfreie Zustandsuntersuchungen an Spannbetonbrücken unter Verkehr T2 - DGZfP-Fachtagung Bauwerksdiagnose "Praktische Anwendungen Zerstörungsfreier Prüfungen" CY - Berlin, Deutschland DA - 2006-02-22 KW - Automatisierte ZfPBau-Verfahren KW - Radar KW - Ultraschallecho KW - Impact-Echo KW - Spannbetonbrücken PY - 2006 SN - 3-931381-71-4 SP - 237 EP - 244 PB - DGZfP CY - Berlin AN - OPUS4-12159 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - George, Janine ED - Bastian, P. ED - Dranzlmüller, D. ED - Brüchle, H. ED - Mathias, G. T1 - Accelerated Materials Discovery with Automation and Machine­Learned Chemical Knowledge N2 - This project aims to accelerate the search for new materials (e.g., for thermoelectric applications, battery materials, magnets, and other materials classes) based on ab initio high­throughput studies. High­throughput searches are typically restricted to known materials. This project explores strategies (data­driven chemical heuristics in subproject 1 and machine­learned interatomic potentials in subproject 2) to go beyond current database entries and include such computationally demanding properties in high­throughput searches. To accomplish each subproject, we develop automated workflows for high­throughput computations and provide large open databases of computed materials properties to the research community. KW - Automation KW - Chemically Complex Materials KW - Machine Learning KW - Machine-Learned Interatomic Potentials KW - Workflows PY - 2024 UR - https://doku.lrz.de/files/10745976/1136429625/1/1731329162337/2024_SuperMUC-Results-Reports.pdf SN - 978-3-9816675-6-1 SP - 72 EP - 75 AN - OPUS4-61618 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - George, Janine T1 - Materialinformatik N2 - Die Materialinformatik ermöglicht es, vorhandenes/etabliertes chemisches Wissen zu überprüfen, aber auch neues Wissen zu generieren. Zu diesem Zweck wurden automatisierte Methoden entwickelt, die es ermöglichen, große Datenbanken mit Materialeigenschaften zu berechnen. Diese Datenbanken mit berechneten Eigenschaften können nun mit Datenanalysetechniken und maschinellem Lernen ausgewertet werden. Unsere Entwicklungen ermöglichen es insbesondere, die Analyse der chemischen Bindung mit anderen Materialeigenschaften in großem Maßstab zu kombinieren. Auf der Grundlage von Deskriptoren für chemische Bindungen haben wir die ersten Schritte zur Entwicklung neuer chemischer Regeln unternommen. Daneben entwickeln wir weitere Programmcodes, die die Tätigkeiten in der Materialinformatik deutlich erleichtern KW - Materialdesign KW - Maschinelles Lernen KW - Automatisierung KW - Hochdurchsatz KW - Workflows KW - Materialeigenschaften PY - 2024 SN - 978-3-8007-6472-3 SP - 14 EP - 32 CY - Berlin AN - OPUS4-62256 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böhning, Martin A1 - Goering, Harald A1 - Hao, Ning A1 - Schönhals, Andreas T1 - Polymer-based Nanocomposites - Particle Dispersion and Physical Properties T2 - Nanofair 2005 CY - Dresden, Germany DA - 2005-11-29 KW - Polymerbasierte Nanokomposite PY - 2005 SN - 3-18-091920-5 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1920 SP - 263 EP - 267 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-11589 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tscharntke, Dirk A1 - Heckel, Thomas A1 - Boehm, Rainer A1 - Erhard, Anton A1 - Krull, R. A1 - Lützner, J. A1 - Hintze, H. T1 - Development of in-service rail inspection systems using phased arrays PY - 2012 SN - 978-3-87155-608-1 SN - 1618-4513 VL - 4 SP - 182 EP - 187 PB - DVS Media GmbH CY - Düsseldorf ET - English Edition AN - OPUS4-26828 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kasch, Thomas A1 - Binder, Christian A1 - Brock, Thomas A1 - Treisch, Nico A1 - Dielforder, Philip ED - Davis, S.E. ED - Steinberg, T.A. T1 - Fire without cause of an oxygen component with an aluminium seal N2 - It is common, even for high pressure service, for most of the components in oxygen systems to contain nonmetallic materials. The risk of an oxygen fire is low if the design of the component and its metallic and non-metallic materials are properly selected. From a safety point of view, it is obvious that a component made completely of metal with metallic seals should have a lower risk of fire. However, during a test series performed at the outdoor test site of the German Federal Institute for Materials Research and Testing (BAM), “BAM Test Site Technical Safety,” an oxygen component burned out that contained metallic seals only. In the test, a bursting metallic diaphragm produces a single pressure shock at a specified oxygen pressure. In the incident, an aluminum diaphragm with a thickness of 1.5 mm was used at a burst pressure of 171 bar. At first, investigations at BAM focused on the question of whether a bursting aluminum diaphragm is able to ignite a bulk metal. Stress rupture tests were performed on this particular aluminum. A high-speed infrared camera helped reveal information on the temperature rise in the rupture zone. Furthermore, other possible ignition sources such as contamination or flow friction were considered, also. This paper discusses the results of the investigation, and it tries to answer the question of whether aluminum sheet materials increase the fire risk in oxygen components. KW - Aluminium KW - High-pressure oxygen KW - Bursting diaphragm KW - Metallic material KW - Fire risk KW - Ignition source KW - Accident research KW - Safety engineering PY - 2012 SN - 978-0-8031-7547-1 DO - https://doi.org/10.1520/STP20120004 VL - 13 IS - STP 1561 SP - 105 EP - 116 CY - West Conshohocken, PA, USA AN - OPUS4-27138 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kasch, Thomas A1 - Binder, Christian A1 - Hesse, Olaf A1 - Lehné, Siegfried A1 - Ciscato, W. ED - Davis, S.E. ED - Steinberg, T.A. T1 - Safe for oxygen but not for oxygen-enriched gas mixtures in SCUBA diving N2 - In a market study, more than 60 representative cylinder valves that are used in SCUBA diving were tested for burn-out safety according to the current standard ISO 10297 [2006, “Transportable Gas Cylinders—Cylinder valves—Specification and Type Testing,” International Standards Organization, Geneva, Switzerland]. This standard requires that oxygen cylinder valves have to be pressure-surge tested to prove their ignition resistance. After testing, the samples are disassembled and the nonmetallic materials shall not show any traces of ignition for the valve to pass the test. This is usually done by visual inspection. The existing pass–fail criteria, however, cause problems sometimes when the test results have to be interpreted or are not sufficient to ensure a safe use of the valve. This market study reveals what changes a non-metallic material may show after pressure-surge testing. It also shows the influence of the different design geometries in the seat area on the nonmetallic materials. After testing, some nonmetallic materials do not show any distinct traces of ignition or combustion. Only a change in color, notable surface deterioration, and loss of material is visible. Occasionally, the valve is no longer gas-tight, although no traces of ignition can be detected. However, according to the standard, the valve has passed the test. This paper provides various reasons why the pass–fail criteria of the oxygen pressure surge need to be more tightened. This applies not only to the current version of the standard ISO 10297, but for any standard that requires performance of the pressure-surge test for oxygen components. PY - 2012 SN - 978-0-8031-7547-1 DO - https://doi.org/10.1520/STP20120005 VL - 13 IS - STP 1561 SP - 172 EP - 181 CY - West Conshohocken, PA, USA AN - OPUS4-27137 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Hartelt, Manfred ED - Bartz, Wilfried J. T1 - Tribologische Charakterisierung von Werkstoffen bei ungeschmierter reversierender Gleitbewegung T2 - 10th international colloquium CY - Esslingen, Deutschland DA - 1996-01-09 KW - Tribologie KW - Gleitbewegung PY - 1996 SN - 3-924813-34-5 N1 - Serientitel: Internationales Kolloquium / Technische Akademie Esslingen – Series title: Internationales Kolloquium / Technische Akademie Esslingen IS - 10 SP - 919 EP - 928 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-579 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Hartelt, Manfred ED - Bartz, Wilfried J. T1 - Zum Einfluß der Luftfeuchte auf das tribologische Verhalten keramischer Werkstoffe bei oszillierender Gleitbewegung T2 - 10th international colloquium CY - Esslingen, Deutschland DA - 1996-01-09 KW - Luftfeuchtigkeit KW - Tribologie KW - Gleitbewegung PY - 1996 SN - 3-924813-34-5 N1 - Serientitel: Internationales Kolloquium / Technische Akademie Esslingen – Series title: Internationales Kolloquium / Technische Akademie Esslingen IS - 10 SP - 2381 EP - 2396 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-580 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Hartelt, Manfred A1 - Spur, G. A1 - Weigmann, U. ED - Bartz, Wilfried J. T1 - On the Influence of Surface Finish of SSiC on the Results of Tribological Laboratory Tests T2 - 10th international colloquium CY - Esslingen, Deutschland DA - 1996-01-09 KW - Tribologie KW - Oberflächenbehandeln KW - SSiC PY - 1996 SN - 3-924813-34-5 N1 - Serientitel: Internationales Kolloquium / Technische Akademie Esslingen – Series title: Internationales Kolloquium / Technische Akademie Esslingen IS - 10 SP - 1961 EP - 1970 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-581 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Wolfgang ED - Lindgren, U. T1 - Glasherstellung und Bleiverglasung KW - Glasherstellung KW - Bleiverglasung PY - 1996 SN - 3-7861-1748-9 SP - 289 EP - 294 PB - Gebr. Mann CY - Berlin AN - OPUS4-629 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Henschen, Joachim A1 - Hoffmann, Dirk A1 - Niedack-Nad, Marianne A1 - Rudolph, Michael A1 - Schaurich, Dieter ED - Friese, P. ED - Venzmer, H. T1 - Anwendung und Kombination moderner Untersuchungsverfahren zur Beurteilung des Feuchtehaushalts im Zeughaus Berlin T2 - Vorträge anläßlich der 7. Hanseatischen Sanierungstage CY - Kühlungsborn, Deutschland DA - 1996-11-07 KW - Bauteil KW - Feuchtegehalt KW - Mikrowelle KW - Zeughaus, Berlin PY - 1996 SN - 3-345-00629-4 IS - 7 SP - 182 EP - 207 PB - Verlag für Bauwesen CY - Berlin AN - OPUS4-643 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Greenwood, J. A1 - Schröder, Hartmut A1 - Trubiroha, Peter A1 - Franke, P. A1 - Hufenus, R. T1 - Durability standards for goesynthetics - The tests for weathering and biological resistance T2 - 1st European Geosynthetics Conference (EUROGEO 1) CY - Maastricht, The Netherlands DA - 1996-09-30 KW - Bewitterung KW - Beständigkeit KW - Material, geosynthetisch KW - Normung PY - 1996 SN - 90-5410-836-3 SP - 637 EP - 642 PB - Balkema CY - Rotterdam AN - OPUS4-644 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hoffmann, Dirk A1 - Niesel, Konrad A1 - Plagge, R. ED - Riederer, J. T1 - Relationship between pore structure and other physico-technical characteristics of stone T2 - 8th International Congress on Deterioration and Conservation of Stone CY - Berlin, Germany DA - 1996-09-30 KW - Stein KW - Porenstruktur KW - Eigenschaft, physikalisch-technisch PY - 1996 SN - 3-00-000779-2 VL - 1 SP - 461 EP - 472 CY - Berlin AN - OPUS4-645 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hoffmann, Dirk A1 - Niedack-Nad, Marianne A1 - Niesel, Konrad ED - Riederer, J. T1 - Evaporation as a feature of chracterizing stone T2 - 8th International Congress on Deterioration and Conservation of Stone CY - Berlin, Germany DA - 1996-09-30 KW - Stein KW - Verdampfung KW - Wasser PY - 1996 SN - 3-00-000779-2 VL - 1 SP - 453 EP - 460 CY - Berlin AN - OPUS4-646 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Niedack-Nad, Marianne A1 - Henschen, Joachim A1 - Hoffmann, Dirk A1 - Rudolph, Michael A1 - Schaurich, Dieter ED - Riederer, J. T1 - Complex investigations of the moisture balance in structural members made of natural stone - a case study of the Berlin Zeugnis T2 - 8th International Congress on Deterioration and Conservation of Stone CY - Berlin, Germany DA - 1996-09-30 KW - Stein KW - Naturstein KW - Wasserhaushalt KW - Feuchtigkeit KW - Zeughaus, Berlin PY - 1996 SN - 3-00-000779-2 VL - 1 SP - 441 EP - 451 CY - Berlin AN - OPUS4-647 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schulz, Ulrich A1 - Trubiroha, Peter A1 - Zwick, W. ED - Roller, D. T1 - Environmental etch resistance of automotive coatings-predicted by the ADF-weathering test T2 - 30th International Symposium on Automotive Technology and Automation (ISATA) CY - Florence, Italy DA - 1997-06-16 KW - Lack KW - Fahrzeug KW - Bewitterung KW - Ätzen PY - 1996 PB - Automotive Automation Ltd. CY - Croydon AN - OPUS4-648 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Schultrich, B. A1 - Scheibe, H.-J. T1 - Zusammenhänge zwischen tribologischem Verhalten und mechanischen Eigenschaften bei harten amorphen Kohlenstoffschichten T2 - Tagung Reibung und Verschleiß CY - Bad Nauheim, Deutschland DA - 1996-03-21 KW - Kohlenstoffschicht, amorph KW - Tribologie KW - Eigenschaft, mechanisch PY - 1996 SN - 3-88355-220-8 SP - 141 EP - 146 PB - DGM Informationsges.-Verl. CY - Oberursel AN - OPUS4-654 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian A1 - Qiao, Linan ED - Bader, M. T1 - Determination of the interfacial fracture toughness using micromechanical tests T2 - 7th European Conference on Composite Materials (ECCM-7) CY - London, England, UK DA - 1996-05-14 KW - Micromechanik KW - Grenzfläche KW - Bruch KW - Finite-Elemente-Methode PY - 1996 SN - 1-85573-304-8 VL - 2 SP - C609-1-C609-6 PB - Woodhead Publishing Ltd CY - Cambridge AN - OPUS4-655 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Skopp, André A1 - Klaffke, Dieter T1 - Tribologische Untersuchungen an TiN-, DLC- und Diamantbeschichtungen bei oszillierender Gleitbewegung T2 - Tagung Reibung und Verschleiß CY - Bad Nauheim, Deutschland DA - 1996-03-21 KW - Tribologie KW - Titan Stickstoff KW - Diamant KW - DLC-Beschichtung KW - Beschichtung PY - 1996 SN - 3-88355-220-8 SP - 111 EP - 116 PB - DGM Informationsges.-Verl. CY - Oberursel AN - OPUS4-656 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mietz, Jürgen A1 - Oldfield, J. W. T1 - The use of austenitic and duplex stainless steels in ground anchor environments T2 - International Congress Stainless Steels '96 ; Proceedings of the 2nd European congress CY - Düsseldorf and Neuss, Germany DA - 1996-06-03 KW - Stahl, austenitisch KW - Stahl, doppel rostfrei KW - Bodenanker PY - 1996 SN - 3-514-00601-6 SP - 149 EP - 156 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-674 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Wolfgang ED - Lindgren, U. T1 - Glasherstellung und Bleiverglasung KW - Glasherstellung KW - Bleiverglasung PY - 1996 SN - 3-7861-1748-9 SP - 289 EP - 294 PB - Gebr. Mann CY - Berlin AN - OPUS4-633 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Jörg A1 - Kautek, Wolfgang ED - Dubowski, J. T1 - Femtosecond-pulse laser processing of metallic and semiconducting thin films KW - Femtosekundenpulslaser KW - Pulslaser KW - Dünnschicht, metallisch KW - Dünnschicht, halbleitend KW - Ablation PY - 1995 SN - 0-8194-1750-5 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 2403 SP - 436 EP - 447 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-637 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sievert, Rainer A1 - Meersmann, Jürgen A1 - Kühn, Hans-Joachim A1 - Bendig, Max A1 - Frenz, Holger A1 - Olschewski, Jürgen A1 - Ziebs, Josef ED - Lütjering, G. T1 - Lifetime investigations for low-cycle fatigue of a nickel-base superalloy under proportional and non-proportional loading at elevated temperatures T2 - 6th International Fatigue Congress CY - Berlin, Germany DA - 1996-05-06 KW - Lebensdauer KW - Ermüdung KW - Legierung KW - Superlegierung KW - Hochtemperatur PY - 1996 SN - 0-08-042268-3 VL - 2 IS - 2 SP - 837 EP - 842 PB - Pergamon CY - Oxford AN - OPUS4-666 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Portella, Pedro Dolabella A1 - Frenz, Holger A1 - Kinder, Joachim A1 - Bertram, Albrecht A1 - Fahlbusch, Erec ED - Lütjering, G. T1 - Cyclic behaviour of the single crystal superalloy SRR99 at 980 degrees C T2 - 6th International Fatigue Congress CY - Berlin, Germany DA - 1996-05-06 KW - Einkristall KW - Superlegierung KW - Hochtemperatur PY - 1996 SN - 0-08-042268-3 VL - 2 IS - 2 SP - 795 EP - 800 PB - Pergamon CY - Oxford AN - OPUS4-667 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Österle, Werner A1 - Portella, Pedro Dolabella A1 - Ziebs, Josef A1 - Jiao, Feng ED - Lütjering, G. T1 - Mechanical behaviour of alloy 800h under cyclic biaxial loading T2 - 6th International Fatigue Congress CY - Berlin, Germany DA - 1996-05-06 KW - Legierung KW - Belastung, zyklisch KW - Beanspruchung, mechanisch PY - 1996 SN - 0-08-042268-3 VL - 2 IS - 2 SP - 989 EP - 994 PB - Pergamon CY - Oxford AN - OPUS4-669 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Bärmann, R. A1 - Frielinghaus, R. A1 - Kreschmar, F. A1 - Krogge, O. A1 - Langenberg, K. A1 - Maierhofer, Christiane A1 - Müller, W. A1 - Neisecke, J. A1 - Schickert, M. A1 - Schmitz, V. A1 - Wiggenhauser, Herbert A1 - Wollbold, F. ED - Schickert, G. T1 - Comparison of pulse-echo-methods for testing concrete T2 - International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 1995-09-26 KW - Beton KW - Radar KW - Aufprallecho KW - Ultraschall KW - Prüfung PY - 1995 SN - 3-931381-02-1 N1 - Serientitel: BB / DGZfP – Series title: BB / DGZfP SP - 281 EP - 295 PB - DGZfP, Dt. Ges. für Zerstörungsfreie Prüfung e.V. CY - Berlin AN - OPUS4-593 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rösch, A. A1 - Hillemeier, B. A1 - Porzig, Ekkehard A1 - Krause, Martin A1 - Maierhofer, Christiane ED - Schickert, G. T1 - Air voids, poor compaction and areas of low concrete strength detection in concrete by pulse velocity measurements T2 - International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 1995-09-26 KW - Beton, Stabilität KW - Ultraschall KW - Fehlstelle KW - Hohlraum PY - 1995 SN - 3-931381-02-1 N1 - Serientitel: BB / DGZfP – Series title: BB / DGZfP VL - 2 SP - 895 EP - 902 PB - DGZfP, Dt. Ges. für Zerstörungsfreie Prüfung e.V. CY - Berlin AN - OPUS4-595 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lugscheider, E. A1 - Berger, Georg A1 - Knepper, M. A1 - Sicking, R. A1 - Nyland, A. ED - Wilson, J. ED - Hench, L. T1 - Plasma Spreyed Coatings of Calcium Titanium Phosphate - A New Generation of Bioactive Coatings T2 - 8th International Symposium on Ceramics in Medicine CY - Ponte Vedra, FL, USA DA - 1995-11-01 KW - Plasmasprühen KW - Überzug KW - Schutzschicht KW - Bioaktiv PY - 1995 SN - 0-08-042677-8 DO - https://doi.org/10.1016/S0109-5641(96)80046-7 VL - 8 SP - 317 EP - 322 PB - Elsevier Science CY - Oxford AN - OPUS4-602 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Georg A1 - Gildenhaar, Renate A1 - Ploska, Ute ED - Wilson, J. ED - Hench, L. T1 - Rapidly Resorbable Materials Based On A New Phase - CA2KNA(PO4)2 T2 - 8th International Symposium on Ceramics in Medicine CY - Ponte Vedra, FL, USA DA - 1995-11-01 KW - Material, resorbierbar KW - Knochensubstitut KW - Biomaterial PY - 1995 SN - 0-08-042677-8 VL - 8 SP - 453 EP - 456 PB - Elsevier Science CY - Oxford AN - OPUS4-603 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kautek, Wolfgang A1 - Sahre, Mario ED - Dunsch, L. ED - Klatt, B. T1 - Neue Einblicke in elektrochemische Doppelschichtprozesse mit der Quarzmikrowaage: Halogenadsorption an Silberelektroden T2 - Jahrestagung der GDCh-Fachgruppe Angewandte Elektrochemie CY - Dresden, Deutschland DA - 1995-09-28 KW - Adsorption KW - Halogen KW - Elektrode KW - Elekrochemie KW - Doppelprozeß KW - Quarzmikrowaage PY - 1995 SN - 3-924763-48-8 VL - 2 SP - 359 CY - Frankfurt am Main AN - OPUS4-604 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Procop, Mathias ED - Hunger, H.-J. T1 - AUGER-Elektronenspektroskopie PY - 1995 SN - 3-342-00430-4 SP - 382 EP - 408 PB - Dt. Verl. für Grundstoffindustrie CY - Leipzig AN - OPUS4-605 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Hans-Joachim A1 - Pfeifer, L. T1 - Entwicklung der Widerstands-Preßschweißverfahren KW - Widerstandsschweißtechnik KW - Schweißtechnik PY - 1996 SN - 3-87155-739-0 SN - 0935-0292 VL - 11.1997 SP - 169 EP - 188 PB - Verl. für Schweißen u. Verwandte Verfahren DVS-Verl. CY - Düsseldorf AN - OPUS4-687 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomas, Hans-Martin A1 - Pohl, Rainer A1 - Rühe, S. T1 - Automatische Auswertung von Wirbelstrombildern N2 - Die Wirbelstromprüftechnik ist eine hochempfindliche Prüfmethode, mit der kleinste Materialschäden in metallischen Prüfkörpern nachgewiesen werden können. Die Prüfung kann berührungslos und bei sehr hohen Prüfgeschwindigkeiten durchgeführt werden. Dies sind beste Voraussetzungen für den Einsatz in automatischen Produktionsanlagen. Die Wirbelstromprüfung kann vielfach direkt in die Produktionslinie von Halbzeugen integriert werden. Zur Abdeckung der gewünschten Prüffläche werden je nach geforderter Prüfempfindlichkeit Durchlaufsensoren, Anordnungen von mehreren Tastsonden oder rotierende Sensoren eingesetzt. Die Entscheidung über das Vorhandensein einer unzulässigen Inhomogenität wird durch das Überschreiten einer festgelegten Signalschwelle festgestellt, wonach eine Aussortierung ausgelöst werden kann. Dieses einfache Kriterium versagt jedoch, wenn durch das Prüfteil Anzeigen hervorgerufen werden, die nach ihrer Herkunft unterschieden werden müssen. Beispielsweise könnte eine Prüfaufgabe so gestellt sein, daß in einem Prüfteil Poren geduldet werden, während rißartige Inhomogenitäten unzulässig sind. Anhand von Beispielen wird gezeigt, wie durch den Einsatz von speziellen Computeralgorithmen an flächenhaft gewonnenen Wirbelstrombildern eine Unterscheidung der Anzeigentypen durchgeführt werden kann. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 1999 CY - Celle, Deutschland DA - 1999-05-10 KW - Wirbelstrombilder PY - 1999 UR - http://www.ndt.net/abstract/dgzfp99/data/17.htm SN - 3-931381-27-7 VL - 1 IS - 68 SP - 163 EP - 171 PB - DGZfP CY - Berlin AN - OPUS4-833 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomas, Hans-Martin A1 - Junger, M. A1 - Krull, R. T1 - Das Wirbelstromverfahren auf die Schiene gebracht - Prüfung betriebsbedingter Schädigungen an Eisenbahnschienen mit Wirbelstrom-Verfahren N2 - Das Streckennetz der Deutschen Bahn unterliegt einer permanenten Überwachung. Nach der deutschen Vereinigung hat es sich in seinem zusammenhängenden Umfang nochmals deutlich vergrößert. - Grund genug, nach neuen und verbesserten Prüfverfahren zu suchen, um einerseits die größtmögliche Sicherheit des Schienenverkehrs zu erreichen und andererseits den Unterhalt des Schienennetzes möglichst wirtschaftlich zu gestalten. Seit vielen Jahren werden ZfP-Verfahren zur Prüfung eingebauter Schienen eingesetzt, wie zum Beispiel Ultraschall-Verfahren. Relativ jung ist dagegen der Einsatz von Wirbelstrom-Verfahren, der zur Zeit in großem Umfang in Laborversuchen erprobt wird. Hierbei ist die Bewertung betriebsbedingter Schädigungen hinsichtlich der Schadenstiefe und des Schädigungs-Schweregrades besonders wichtig. Es wird über die Untersuchungen an typischen Schädigungen (wie Headchecks und Squats) berichtet und die Möglichkeiten, mit speziell angepaßten Wirbelstrom-Sensoren und Wirbelstrom-Verfahren eine möglichst gute Zuordnung zu Schadenstiefe und Schädigungs-Schweregrad vorzunehmen. Anhand der erreichten Ergebnisse wird außerdem über die eingesetzten bildgebenden Auswerteverfahren und intelligenten Signalverarbeitungsmethoden berichtet. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 1999 CY - Celle, Deutschland DA - 1999-05-10 KW - Wirbelstrom-Verfahren PY - 1999 UR - http://www.ndt.net/abstract/dgzfp99/data/20.htm SN - 3-931381-27-7 VL - 1 IS - 68 SP - 189 EP - 197 PB - DGZfP CY - Berlin AN - OPUS4-834 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mietz, Jürgen A1 - Rückert, Joachim A1 - Isecke, Bernd T1 - Dauerhafte Anker für den Grundbau - neue Werkstoffkonzepte T2 - Jahrestagung der Gesellschaft für Korrosionsschutz ; GfKORR-Jahrestagung CY - Berlin, Deutschland DA - 2000-11-07 KW - Nichtrostende Stähle KW - Grundanker PY - 2000 SN - 3-935406-03-7 SP - 121 EP - 131 PB - Ges. für Korrosionsschutz CY - Frankfurt am Main AN - OPUS4-836 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mietz, Jürgen T1 - Problemlösungen für Bauteile und Verbindungsmittel im Ingenieurbau T2 - Jahrestagung der Gesellschaft für Korrosionsschutz ; GfKORR-Jahrestagung CY - Berlin, Deutschland DA - 2000-11-07 KW - Korrosion PY - 2000 SN - 3-935406-03-7 SP - 1(?) EP - 20(?) PB - Ges. für Korrosionsschutz CY - Frankfurt am Main AN - OPUS4-838 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiggenhauser, Herbert A1 - Krause, Martin A1 - Krieger, J. ED - Medlock, R. T1 - Tests and assessments of NDT methods for concrete bridges N2 - A research project is described involving a comparison of different non-destructive test methods for concrete bridges. A cooperative test series was started with the aim to compare and evaluate the performance and benefits of the latest technical developments in this field. For this purpose test specimens with localized defects were produced. Different modifications of radar, ultrasonic-echo and impact-echo methods were investigated. Including two- and three- dimensional reconstruction models. The experiments were accompanied by numerical simulation of the propagation of sound waves and microwaves. The results showed that the radar and the ultrasonic methods were efficient tools to locate the tendon ducts accurately if the reinforcing bars were not to narrowly spaced. The ultrasonic imaging methods were capable of identifying injection and compaction faults in a blind test. The good performance of the impact-echo method with regard to locating tendon ducts which was claimed in several publications could not be validated in the present investigations. The simulation models provided valuable information on how to improve the experimental test program and its evaluation. T2 - Structural materials technology III CY - San Antonio, TX, USA DA - 1998-03-31 KW - Non-destructive testing in civil engineering KW - concrete bridges KW - tendons KW - ducts KW - injection faults KW - compaction faults KW - round robin test KW - ultrasonic testing KW - pulse radar KW - impact-echo KW - reconstruction calculation KW - synthetic aperture focusing technique (SAFT) KW - magnetic stray field KW - ruptures in prestressing reinforcement PY - 1999 SN - 0-8194-2849-3 DO - https://doi.org/10.1117/12.300098 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series VL - 3400 SP - 258 EP - 269 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-829 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Casperson, Ralf A1 - Pohl, Rainer A1 - Thomas, Hans-Martin T1 - Nachweis von Verunreinigungen in Supraleitern mit dem Wirbelstromverfahren N2 - Zusammenfassung Inhomogenitäten in supraleitenden Hohlraumresonatoren eines Linearbeschleunigers führen beim Betrieb zu einem lokalen Zusammenbruch der Supraleitung (Quench) und begrenzen dadurch die maximale Leistung des Beschleunigers. Es wurde ein Prüfsystem zur Qualitätsüberwachung der Niob-Bleche entwickelt, aus denen die Resonatoren gefertigt werden. Die Bleche werden mit dem Wirbelstromverfahren berührungslos abgetastet, wobei ein in der BAM entwickelter Sondenhalter nach dem Luftkissenprinzip verwendet wird. Mit dem Prüfsystem lassen sich Poren und Verun-reinigungen mit einer Ausdehnung ab ca. 80 µm sowohl an der Oberfläche als auch verdeckt nachweisen. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 1999 CY - Celle, Deutschland DA - 1999-05-10 KW - Supraleiter PY - 1999 UR - http://www.ndt.net/article/v04n08/casperson/casperson.htm SN - 3-931381-27-7 VL - 2 IS - 68 SP - 735 EP - 742 PB - DGZfP CY - Berlin AN - OPUS4-795 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühnemund, Lutz A1 - Kautek, Wolfgang A1 - Röllig, Mathias ED - Plieth, W. T1 - Pulse Laser Depassivation at 532 nm of Titanium in NaCl Electrolytes T2 - Jahrestagung. Gesellschaft Deutscher Chemiker, Fachgruppe Angewandte Elektrochemie CY - Freiberg, Germany DA - 1999-09-29 KW - Pulsed-Laser-Depassivated Titanium PY - 2000 SN - 3-924763-85-2 N1 - Serientitel: GDCh-Monographien – Series title: GDCh-Monographien IS - 18 SP - 117 EP - 124 PB - Ges. Deutscher Chemiker CY - Frankfurt am Main AN - OPUS4-842 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Harbich, Karl-Wolfram A1 - Schors, Jörg A1 - Lange, Axel A1 - Hentschel, Manfred P. ED - van Hemelrijck, D. T1 - X-ray refraction - new methods for non-destructive evaluation of advanced materials T2 - 2nd International Conference on Emerging Technologies in NDT CY - Athens, Greece DA - 1999-05-24 KW - X-ray refraction PY - 2000 SN - 90-5809-127-9 SP - 207 EP - 212 PB - Balkema CY - Rotterdam AN - OPUS4-851 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Isecke, Bernd ED - von Baeckmann, W. ED - Schwenk, W. T1 - Kathodischer Korrosionsschutz von Bewehrungsstahl in Betonbauten KW - Kathodischer Korrosionsschutz KW - Bewehrungsstahl PY - 1999 SN - 3-527-29586-0 SP - 395 EP - 407 PB - Wiley-VCH CY - Weinheim ET - 4., völlig neubearb. AN - OPUS4-788 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rurack, Knut A1 - Martínez-Mánez, Ramon ED - Rurack, Knut ED - Martínez-Mánez, Ramon T1 - Supramolecular chemistry meets hybrid (nano)materials: A brief look ahead KW - Hybridmaterialien KW - Ionische Flüssigkeiten KW - Lumineszenz KW - MOFs KW - Nanodiamant KW - Nanopartikel KW - Nanostrukturierter Kohlenstoff KW - Nanostrukturiertes Siliziumcarbid KW - Supramolekulare Chemie PY - 2010 SN - 978-0-470-37621-8 SP - 689 EP - 700 PB - John Wiley & Sons CY - Hoboken, New Jersey, USA AN - OPUS4-21961 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Martínez-Mánez, Ramon A1 - Sancenón, F. A1 - Descalzo López, Ana Belén A1 - Rurack, Knut ED - Abd-El Aziz, Alaa S. ED - Carraher, Charles E. ED - Pittman, Charles U. ED - Zeldin, Martel T1 - Supramolecular hybrid materials - integrating functionality with sensing KW - Biochemie KW - Biomakromoleküle KW - DNA KW - Gold KW - Hybridmaterialien KW - Nanopartikel KW - Quantenpunkte KW - Selbstorganisation KW - Sensorik KW - Silica KW - Supramolekulare Chemie PY - 2009 SN - 978-0-470-25144-7 SN - 1545-438X VL - 9 SP - 369 EP - 405 PB - John Wiley & Sons CY - Hoboken, New Jersey, USA AN - OPUS4-20318 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rehmer, Birgit A1 - Beckmann, Jörg A1 - Finn, Monika A1 - Glaubitz, Steffen ED - Singh, M. T1 - Determination of elastic moduli of C/C-Composite at elevated temperature up to 1900° C T2 - 5th International Conference on High Temperature Ceramic Matrix Composites (HTCMC-5) CY - Seattle, WA, USA DA - 2004-09-12 KW - E-Modul KW - Keramische Verbundwerkstoffe KW - Hochtemperaturprüfung PY - 2004 SN - 1-574-98219-2 SP - 575 EP - 580 PB - American Ceramic Society CY - Westerville AN - OPUS4-5606 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beckmann, Jörg A1 - Schultze, Dietrich A1 - Finn, Monika A1 - Harwardt, Michael A1 - Rehmer, Birgit ED - Degischer, H.-P. T1 - Einfluß der oxidativen Schädigung auf das Elastizitätsverhalten infiltrierter faserverstärkter 2D-C\C- Keramiken T2 - 14. Symposium Verbundwerkstoffe und Werkstoffverbunde CY - Wien, Österreich DA - 2003-07-02 PY - 2003 SN - 3-527-30762-1 SP - 361 EP - 366 PB - Wiley-VCH CY - Weinheim AN - OPUS4-2593 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Eckardt, Jürgen A1 - Berger, Wolfgang A1 - Kalbe, Ute ED - Rasemann, W. T1 - Probleme bei der Gewinnung und Untersuchung von wässrigen Bodenlösungen im Altlastenbereich T2 - 9. Freiberger Probenahmetagung CY - Freiberg, Deutschland DA - 2003-11-07 KW - Probenahme KW - Lysimeterversuche PY - 2003 SN - 3-86012-211-8 VL - 9 SP - 10-1-10-10 PB - IQS CY - Freiberg AN - OPUS4-2741 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Eckardt, Jürgen A1 - Helm, Renate T1 - A practical approach to estimation of uncertainty arising from sampling T2 - ConSoil 2008 - 10th International Conference on Soil-Water Systems CY - Milan, Italy DA - 2008-06-03 KW - Soil sampling KW - Assessment uncertainty KW - Heavy metals KW - Geostatistical analysis PY - 2008 SN - 978-3-00-024598-5 SP - D359 EP - D361 PB - UFZ CY - Leipzig AN - OPUS4-17621 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Krüger, Oliver A1 - Christoph, Gabriele T1 - New aspects of the determination of PAH leaching behaviour from contaminated soils T2 - ConSoil 2010 - 11th International UFZ- Deltares/TNO Conference on Management of Soil, Groundwater and Sediment CY - Salzburg, Austria DA - 2010-09-22 KW - Contaminated soil KW - PAH KW - Leaching tests PY - 2010 SN - 978-3-00-032099-6 IS - Posters_A/A2/Berger_etal.pdf SP - 1 EP - 5 AN - OPUS4-22055 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Roland A1 - Kalbe, Ute A1 - Sauer, Andreas ED - Moser, H. ED - Römbke, J. T1 - Selection and characterization of test samples and eluates KW - Municipial waste incineration ash KW - Gaswork contaminated soil KW - Copper-contaminated wood KW - Bulk material KW - Eluates KW - Ökotoxikologie KW - Biotests KW - Abfall KW - Europäische Normung (CEN) KW - Ringversuch PY - 2009 SN - 978-0-387-88958-0 DO - https://doi.org/10.1007/978-0-387-88959-7 N1 - Geburtsname von Sauer, Andreas: Buchholz, A. - Birth name of Sauer, Andreas: Buchholz, A. SP - 35 EP - 46 PB - Springer Science + Business Media AN - OPUS4-22944 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Eckardt, Jürgen A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Grabner, Angela ED - Rasemann, W. T1 - Probenahme und Untersuchung von Böden mit leichtflüchtigen organischen Schadstoffen - ein Methodenvergleich T2 - 11. Freiberger Probenahmetagung "Probenahme und Qualitätssicherung - Alternative Methoden der Qualitätsbestimmung" CY - Freiberg, Deutschland DA - 2005-11-04 KW - Probenahme KW - Leichtflüchtige organische Schadstoffe KW - Bodenluft PY - 2005 SN - 3-86012-263-0 SP - 12-1 - 12-7 PB - IQS CY - Freiberg AN - OPUS4-11479 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Eckardt, Jürgen A1 - Christoph, Gabriele A1 - Walzel, Hans-Peter T1 - Column tests for studying leaching behaviour of PAH's in soil T2 - ConSoil 2005 - 9th International FZK/TNO Conference on Soil-Water Systems CY - Bordeaux, France DA - 2005-10-03 KW - Leaching behaviour KW - PAH KW - Contaminated soil KW - Leachate prognosis KW - Column tests PY - 2005 SN - 3-923704-50-X SP - 827 EP - 832 PB - Fiz Technik CY - Karlsruhe AN - OPUS4-11735 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Christoph, Gabriele T1 - Leaching behaviour of PAH's in demolition waste and contaminated soil T2 - 11th International Waste Management and Landfill Symposium "SARDINIA 2007" CY - San Margherita di Pula, Cagliari, Italy DA - 2007-10-01 PY - 2007 SN - 978-88-6265-003-8 SP - 1 EP - 8 AN - OPUS4-15988 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Kalbe, Ute A1 - Berger, Wolfgang ED - Milind V. Khire, ED - Alshawabkeh, Akram N. ED - Krishna R. Reddy, T1 - Waste characterization by leaching and extraction procedures KW - Leaching KW - Heavy metal release KW - Bottom ash PY - 2008 SN - 978-0-7844-0970-1 VL - 177 IS - Geotechnical Special Publication SP - 676 EP - 683 AN - OPUS4-17217 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Binner, Richard A1 - Homberg, U. A1 - Prohaska, S. A1 - Kalbe, Ute A1 - Witt, K. J. ED - Burns, S.E. ED - Bhatia, S.K. ED - Avila, C. M. C. ED - Hunt, B.E. T1 - Identification of descriptive parameters of the soil pore structure using experiments and CT data T2 - ICSE-5 - 5th International conference on scour and erosion CY - San Francisco, CA, USA DA - 2010-11-07 KW - Pore KW - Pore throat KW - Constriction sizes KW - CT-scan KW - Modelling PY - 2010 UR - http://books.google.de/books?id=tpyWlGWonOEC&pg=PA397&dq=Identification+of+descriptive+parameters+of+the+soil+pore+structure+using+experiments+and+CT+data&hl=de&ei=FjxBTbbiHYmbOuvQrOoB&sa=X&oi=book_result&ct=result&resnum=1&ved=0CCoQ6AEwAA#v=onepage&q=Ide SN - 978-0-7844-1147-6 N1 - Serientitel: Geotechnical Special Publication – Series title: Geotechnical Special Publication VL - 210 SP - 397 EP - 407 AN - OPUS4-23053 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Krüger, Oliver A1 - Hennecke, D. T1 - Elutionsverfahren für die Untersuchung von Böden und Abfällen - Aktueller Stand N2 - Elutionsverfahren sind in den letzten Jahren zunehmend in das öffentliche Interesse gerückt. Zum Einen steht dies im Zusammenhang mit der geplanten Einführung einer Mantelverordnung in Deutschland, im Rahmen derer die Bundes-Bodenschutz- und Altlastenverordnung (BBodSchV) novelliert, eine Ersatzbaustoffverordnung eingeführt und die Deponieverordnung erweitert und modifiziert werden sollen. Dabei sollen die anzuwendenden Elutionsverfahren möglichst angeglichen werden und den aktuellen Erkenntnisstand widerspiegeln. Zum Anderen sind auch internationale Aktivitäten beispielsweise in Verbindung mit der Charakterisierung von Abfällen (CEN TC 292) und Untersuchung der Umweltverträglichkeit von Bauprodukten (CEN TC 351) zu berücksichtigen. PY - 2013 SN - 978-3-89531-872-6 SP - 47 EP - 55 CY - Wiesbaden AN - OPUS4-30192 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Horn, Wolfgang A1 - Jann, Oliver A1 - Burbiel, M. A1 - Wilke, Olaf A1 - Kalus, Sabine ED - Levin, H. T1 - Biocide emissions from materials into indoor air N2 - The European biocides directive (98/8/EG) demand the control of emissions into the envi-ronment like soil, water and air. In this study a method for measuring the input of biocides into the indoor air from materials should be developed. The emission of two products containing biocides (plastic foil, wool carpet) and six different types of biocide containing formulations applied on wood or ceramic tiles were investigated in 20 or 23 l glass emission chambers. Each chamber test was performed over a period of 100 up to 200 days. SVOC show totally different emission curves in chamber tests compared to volatile organic com-pounds (VOC). They reach their maximum value after some days or weeks. Thus a period of 3 months is sometimes necessary for exact measurements. Area specific emission rates (SERa in µg/m²h) for permethrin (0.006), propiconazole (0.2), dichlofluanid (1.5), tolylfluanid (1.2), octylisothiazolinone (2.5) and for iodpropinylbutyl-carbamat (1.7) were determined. T2 - 9th International Conference on Indoor Air Quality and Climate CY - Monterey, CA, USA DA - 2002-06-30 KW - SVOC KW - Biocide KW - Chamber test KW - Polyurethane foam KW - Testing method PY - 2002 UR - http://www.irbnet.de/daten/iconda/CIB6909.pdf SN - 0-9721832-0-5 VL - 2 SP - 926 EP - 930 PB - International Academy of Indoor Air Sciences CY - Santa Cruz, Calif. AN - OPUS4-2000 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilke, Olaf A1 - Jann, Oliver A1 - Brödner, Doris ED - Levin, H. T1 - VOC- and SVOC-Emissions from Adhesives, Floor Coverings and Complete Floor Structures N2 - VOC/SVOC-Emissions from materials for flooring installation (primer, screed, adhesive, floor covering) were measured by means of emission test chambers and cells over a time period of at least 28 days at 23 C, 50 % relative humidity and an area specific air flow rate of q = 1.25 m³/m²h. Single components were tested in comparison to three complete structures (same concrete, primer, screed, adhesive) with different types of floor covering (PVC, carpet, linoleum). Sorption into concrete/screed and different sealing by the flooring materials affected the emissions from the complete structures. The complete structures with linoleum and PVC showed the same emissions and emission rates as the flooring materials alone. Emissions from the carpet-covered structure resulted mainly from the lower layers. For two adhesives the formation of secondary emissions (aldehydes and organic acids) was observed starting after the standard testing time of 28 days. T2 - 9th International Conference on Indoor Air Quality and Climate CY - Monterey, CA, USA DA - 2002-06-30 KW - Test chambers KW - VOCs and SVOCs KW - Secondary emissions KW - Construction and renovation PY - 2002 UR - https://www.irbnet.de/daten/iconda/CIB6472.pdf SN - 0-9721832-0-5 VL - 1 SP - 962 EP - 967 PB - International Academy of Indoor Air Sciences CY - Santa Cruz, Calif. AN - OPUS4-2002 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jann, Oliver A1 - Wilke, Olaf T1 - Möglichkeiten und Grenzen bei der Bestimmung von SVOC-Emissionen aus Materialien und Produkten T2 - Messtechnisches Kolloquium CY - Schwäbisch Gmünd, Deutschland DA - 2002-06-11 PY - 2002 SN - 3-18-091656-7 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1656 SP - 357 EP - 367 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-2126 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Torge, Manfred A1 - Müller, Wolfgang A1 - Jann, Oliver A1 - Brödner, Doris A1 - Wilke, Olaf A1 - Pilz, M. T1 - Schadstoffbelastungen in Ausstellungsvitrinen und Simulation der Bedingungen im Labor T2 - 28. Jahrestagung der GUS CY - Pfinztal bei Karlsruhe, Deutschland DA - 1999-03-10 KW - Kulturguterhaltung KW - Umweltsimulation PY - 1999 SN - 3-9806167-3-8 SP - 16-1-16-14 CY - Pfinztal AN - OPUS4-3233 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rockstroh, Jens A1 - Rühl, Hellmuth A1 - Jann, Oliver T1 - Entwicklung einer umweltverträglichen Holzklebetechnik durch den Einsatz von Proteinbindemitteln T2 - 8. Symposium Nachwachsende Rohstoffe für die Chemie CY - Tübingen, Deutschland DA - 2003-03-26 PY - 2003 SN - 3-7843-3237-4 N1 - Serientitel: Schriftenreihe nachwachsende Rohstoffe – Series title: Schriftenreihe nachwachsende Rohstoffe IS - 22 SP - 567 EP - 571 PB - Landwirtschaftsverl. CY - Münster AN - OPUS4-2649 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jansky, Hans-Joachim A1 - Berger, Wolfgang A1 - Fischer, Hildegard A1 - Kalbe, Ute ED - Rasemann, W. T1 - Herstellung eines Referenzmaterials zur Untersuchung der Eluierbarkeit organischer Schadstoffe T2 - 7. Freiberger Probenahmetagung ; 7. Tagung des Arbeitskreises "Probenahme" CY - Freiberg, Deutschland DA - 2001-11-02 KW - Referenzmaterial KW - Boden KW - Elution KW - Organische Schadstoffe KW - Sickerwasserprognose PY - 2001 SN - 3-86012-157-X IS - V12 SP - 12-1-12-9 PB - TU Bergakad. CY - Freiberg AN - OPUS4-1210 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Homberg, U. A1 - Binner, Richard A1 - Prohaska, S. A1 - Dercksen, V.J. A1 - Kuß, A. A1 - Kalbe, Ute ED - Witt, Karl Josef T1 - Determining geometric grain structure from X-ray micro-tomograms of gradated soil T2 - Workshop "Internal Erosion" CY - Weimar, Germany DA - 2008-11-26 KW - Gradated soil KW - Suffosive erosion phenomena KW - Pore and grain structure KW - Micro computed tomography KW - Morphologic image processing PY - 2008 SN - 978-3-86068-392-7 N1 - Serientitel: Schriftenreihe Geotechnik – Series title: Schriftenreihe Geotechnik IS - 21 SP - 37 EP - 52 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-19866 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Semar, O. A1 - Binner, Richard A1 - Homberg, U. A1 - Kalbe, Ute A1 - Mehlhorn, T. A1 - Prohaska, S. A1 - Slowik, V. A1 - Witt, K. J. ED - Witt, K. J. T1 - Conditions for suffosive erosion phenomena in soils - concept and approach - T2 - Workshop "Internal Erosion" CY - Weimar, Germany DA - 2008-11-26 KW - Pore KW - Pore throat KW - Constriction sizes KW - CT-scan KW - Modelling PY - 2008 SN - 978-3-86068-392-7 N1 - Serientitel: Schriftenreihe Geotechnik – Series title: Schriftenreihe Geotechnik IS - 21 SP - 29 EP - 35 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-19867 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habib, Abdel Karim A1 - Schalau, Bernd T1 - Erforderliche Komplexität bei der Modellierung einer Lachenverdunstung im Rahmen von Störfallauswirkungsbetrachtungen T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Verdunstung KW - Empirische Modelle KW - Experimentelle Daten KW - Anlagensicherheit KW - Umweltschutz KW - Sicherheitstechnik KW - Explosionsschutz PY - 2010 SN - 978-3-89746-119-2 IS - M-01 / Paper 8338 SP - 1 EP - 21 CY - Frankfurt/M. AN - OPUS4-22349 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Dirk A1 - Schalau, Bernd A1 - Acikalin, Hatice Aydan A1 - Habib, Abdel Karim T1 - Vergleich von Methoden zur Quantifizierung von Risiken verfahrenstechnischer Anlagen T2 - 8. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Deutschland DA - 2006-11-09 KW - Risiko KW - QRA KW - Purple Book KW - ARAMIS KW - LOPA KW - Fehlerbaum KW - Gefährdungsermittlung KW - Auswirkungsbetrachtungen KW - Häufigkeiten KW - Datenbank PY - 2006 SN - 3-936415-48-X SP - 1 EP - 14(?) PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-12745 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Trubitz, P. A1 - Rehmer, Birgit A1 - Pusch, G. ED - Pohl, M. T1 - Die Ermittlung elastischer Konstanten von Gusseisenwerkstoffen T2 - Tagung "Werkstoffprüfung 2004", Werkstoffprüfung - Konstruktion, Qualitätssicherung und Schadensanalyse CY - Neu-Ulm, Deutschland DA - 2004-11-25 PY - 2004 SN - 3-88355-337-9 SP - 267 EP - 272 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-7016 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habib, Abdel Karim A1 - Schalau, Bernd A1 - Acikalin, Hatice Aydan A1 - Steinbach, J. T1 - Instationäre Berechnung der Lachenverdunstung und -verdampfung mittels eines Grenzschichtverfahrens T2 - 9. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Deutschland DA - 2008-11-06 KW - Quantitative Risikoanalyse KW - Störfall-Verordnung PY - 2008 SN - 978-3-89746-099-7 IS - I 02 SP - 1 EP - 13 PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-18411 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kluge, Martin A1 - Krause, Heike A1 - Schröder, Volkmar A1 - Acikalin, Hatice Aydan A1 - Steinbach, J. T1 - Study of a self heating process of tetrafluoroethylene by the exothermic dimerization reaction to octafluorocyclobutane T2 - COMSOL Conference CY - Hannover, Germany DA - 2008-11-04 KW - Self heating KW - Free convection KW - Reactive flow KW - Gas reaction PY - 2008 SN - 978-09766792-8-8 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. SP - 1 EP - 7 AN - OPUS4-18611 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kromm, Arne A1 - Kannengießer, Thomas T1 - Stress build up in low transformation temperature filler material under defined restraint conditions T2 - JOM 15 - 15th International Conference on the Joining of Materials / 6th International Conference on Education in Welding ICEW-6 CY - Helsingor, Denmark DA - 2009-05-03 PY - 2009 SN - 87-89582-17-9 SP - 1 EP - 12(?) AN - OPUS4-19433 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brauser, Stephan A1 - Lorenz, Stephan A1 - Kannengießer, Thomas ED - Borsutzki, M. ED - Geisler, S. T1 - Untersuchung des lokalen Dehnungsverhaltens von Schweißverbindungen mittels optischer Dehnungsfeldanalyse T2 - Tagung Werkstoffprüfung 2009 - Fortschritte der Kennwertermittlung für Forschung und Praxis CY - Bad Neuenahr, Deutschland DA - 2009-12-03 KW - 3D-Dehnungsanalyse KW - Widerstandspunktschweißen KW - Laserstrahl-MSG-Hybrid-Schweißen KW - Lokale und globale Dehnungsmessung PY - 2009 SN - 978-3-514-00769-7 SP - 239 EP - 246 PB - Verl. Stahleisen GmbH AN - OPUS4-20747 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Krause, Heike A1 - Schröder, Volkmar ED - Suter, G. ED - de Rademaeker, E. T1 - Study of the explosive decomposition of tetrafluoroethylene in a partially heated pipe T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - Unstable gases KW - TFE KW - Decomposition KW - Pipes PY - 2010 SN - 978-90-76019-291 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. VL - 02 SP - 415 EP - 418 CY - Brugge, Belgium AN - OPUS4-21489 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wäsche, Rolf A1 - Woydt, Mathias A1 - Rehmer, Birgit ED - Ewsuk, K. ED - Naito, M. ED - Kakeshita, T. ED - Kirihara, S. ED - Uematsu, K. ED - Abe, H. T1 - Characterization of the tribological interface in low wear Magneli type ceramics N2 - The tribological behaviour under dry sliding conditions of Magneli phase Ti4O7 and e-phase Ti2Cr2O7 with α-alumina as a sliding partner has been characterised at room temperature by oscillating sliding. The mechanical properties as well as Vickers hardness measurements do not reveal big differences between the materials, and 4-point bending strengths are around 200 MPa for both materials. Although the friction coefficients are in the medium range of 0.6 and do not differ much between the materials, the wear behaviour is very different. At room temperature, the wear coefficient of Ti2O7 is strongly dependent on relative humidity, and wear is highest under dry conditions when relative humidity is low as it is typically found for many ceramic materials. Ti2Cr2O7 shows remarkably different wear behaviour with the lowest wear in dry conditions. The measured coefficients of wear at low relative humidity of 4% are more than 2 orders of magnitude lower than those for Ti2O7. T2 - 3rd International conference on characterization and control of interfaces for high quality advanced materials CY - Kurashiki, Japan DA - 2009-09-06 PY - 2009 SN - 978-0-470-90917-1 VL - 219 SP - 111 EP - 116 PB - John Wiley & Sons CY - Hoboken, New Jersey, USA AN - OPUS4-21842 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rhode, Michael A1 - Mente, Tobias A1 - Kannengießer, Thomas A1 - Czeskleba, Denis T1 - Simulation of hydrogen distribution in submerged arc welded heavy plates as tool for evaluating cold cracking sensitivity for offshore structures N2 - Foundation structures for offshore wind turbines are typically made of heavy plate struc-tural steels, such as S420ML, welded by submerged arc welding. Due to the welding process conditions, higher amounts of hydrogen can be introduced. In this context, large plate thicknesses result in long diffusion paths and a prolonged diffusion time for hydrogen at ambient temperature and possible delayed hydrogen-assisted cold cracking. As a result, hydrogen can accumulate in areas of high mechanical stress and strain. Due to the delayed diffusion, a minimum waiting time of up to 48 h must be observed before non-destructive testing can be performed. In addition, the assessment of possible cold crack locations is very complex. For this reason, a numerical model of a component-like weld test was developed to simulate the temperature field during welding and subsequent cooling. A hydrogen diffusion model based on the temporal-local temperature distribution was established. It was applied to simulate the change of hydrogen distribution as a function of temperature cycle during multi-layer welding and further for the entire waiting time interval ≤ 48 h. As a result, crack critical areas could be evaluated in terms of accu-mulated hydrogen. An advantage of the diffusion model is the simulation of a normalized concentration, i.e. between "0" (no hydrogen) and "1" (max. concentration), which can be scaled to experimentally determined hydrogen concentrations. Finally, selected results for increased real hydrogen ingress are presented, which confirm the relatively high crack resistance of the S420 submerged arc welded joint. KW - Hydrogen assisted cracking KW - Diffusion KW - Numerical simulation KW - Offshore steel PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-632416 DO - https://doi.org/10.21268/20250507-6 SP - 1 EP - 12 PB - Technische Universität Clausthal CY - Clausthal-Zellerfeld, Deutschland AN - OPUS4-63241 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Cuéllar, Pablo A1 - Pastor, M. A1 - Mira, P. A1 - Fernández-Merodo, J.A. A1 - Baeßler, Matthias A1 - Rücker, Werner ED - Benz, T. ED - Nordal, S. T1 - Numerical investigations for the pile foundation of an offshore wind turbine under transient lateral load N2 - Numerical analysis can be useful for the investigation of important aspects of offshore foundation prototypes that otherwise could hardly be studied experimentally, like the evolution of pore-water pressure around the monopile foundation of an offshore wind turbine under extreme loading. A combination of mixed pressuredisplacement formulations along with a constitutive model for sands based on the Generalized Plasticity Theory can replicate accurately the soil behaviour in saturated conditions. However, additional issues must be taken into account in order to perform numerical simulations of offshore piles. Some implications of the Babuska-Brezzi restriction, as well as considerations about the pile-soil interface and suitable solution strategies are discussed here. Due to the high cost of the transient analysis, the parallel computation offers a promising perspective, but can be complex and needs to be implemented carefully in order to avoid a performance deterioration. A brief overview on current trends and functional software is given here. T2 - 7th European conference on numerical methods in geotechnical engineering (NUMGE 2010) CY - Trondheim, Norway DA - 2010-06-02 KW - Offshore pile foundation KW - Cyclic lateral load KW - Pore pressure accumulation PY - 2010 SN - 978-0-415-59239-0 SP - 913 EP - 919 PB - Taylor & Francis AN - OPUS4-21572 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dutschke, Andreas A1 - Lohrer, Christian A1 - Seeger, Stefan A1 - Kurth, Lutz A1 - Schmidt, Martin A1 - Kaiser, Michael A1 - Stattaus, Kim A1 - Panne, Ulrich T1 - Determination of reaction products during a large firework display in Germany T2 - 11th International symposium on fireworks CY - Puerto Vallarta, México DA - 2009-04-20 KW - Firework display KW - Reaction products KW - Particles KW - Sound pressure PY - 2009 SN - 978-0-9734123-8-3 SP - 50 EP - 63 AN - OPUS4-19383 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ebell, Gino T1 - Materialtechnische Untersuchungen an den Spanndrähten N2 - Wasserstoffinduzierte Spannungsrisskorrosion führt zu Standsicherheitsproblemen an Spannbetonbrückenbauwerken mit hochempfindlichen Spannstählen im Spannblockverfahren. KW - Korrosion KW - Spannstahl KW - Spannungsrisskorrosion PY - 2021 SP - 37 EP - 44 PB - Landesbetrieb Straßenwesen Brandenburg CY - Hoppegarten AN - OPUS4-53501 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rockstroh, Jens A1 - Jann, Oliver A1 - Wilke, Olaf A1 - Noske, Reinhard A1 - Brödner, Doris A1 - Schneider, Uwe A1 - Horn, Wolfgang ED - Wai, T. K. ED - Sekhar, C. ED - Cheong, D. T1 - Investigations on VOC, ozone and dust emissions from hardcopy devices (laser printers, copiers and multifunctional devices) in test chambers - development of a test method T2 - 7th Healthy Buildings Conference ; HB 2003 ; ISIAQ international conference CY - Singapore, Republic of Singapore DA - 2003-12-07 KW - Emissions KW - Printers KW - Copiers KW - VOC KW - Dust KW - Ozone KW - Blue Angel PY - 2003 SN - 981-049974-4 VL - 1 SP - 397 EP - 403 CY - Singapore AN - OPUS4-3315 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilke, Olaf A1 - Jann, Oliver A1 - Brödner, Doris ED - Wai, T. K. ED - Sekhar, C. ED - Cheong, D. T1 - VOC and SVOC Contribution of Papers for Hardcopy Devices to Indoor Air Pollution T2 - 7th Healthy Buildings Conference ; HB 2003 ; ISIAQ international conference CY - Singapore, Republic of Singapore DA - 2003-12-07 PY - 2003 SN - 981-049974-4 VL - 1 SP - 289 EP - 295 CY - Singapore AN - OPUS4-3377 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilke, Olaf A1 - Jann, Oliver A1 - Brödner, Doris T1 - Emissionsmessungen an Materialien für Fußbodenaufbauten T2 - Kolloquium Luftverunreinigungen im Innenraum CY - Düsseldorf, Deutschland DA - 2003-11-03 PY - 2003 SN - 3-18-091778-4 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1778 SP - 71 EP - 82 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-3378 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Horn, Wolfgang A1 - Gellert, R. A1 - Jann, Oliver A1 - Kalus, Sabine A1 - Brödner, Doris T1 - Emission tests on thermal insulation products with the intention to implement these tests into EN standards T2 - Indoor Air 2005 CY - Beijing, PR China DA - 2005-09-04 KW - Bauprodukte KW - Emissionen KW - Dämmstoffe KW - Kammerverfahren KW - VOC KW - EN-Standards KW - Insulation material KW - VOC emission KW - Chamber copmparison KW - Construction products directive KW - AgBB-scheme PY - 2005 SN - 7-89494-830-6 IS - 2 SP - 1886 EP - 1890 PB - Tsinghua University Press CY - Beijing AN - OPUS4-7612 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, B. A1 - Bitter, F. A1 - Müller, D. A1 - Knudsen, H.N. A1 - Afshari, A. A1 - Wargocki, P. A1 - Olesen, B. A1 - Berglund, B. A1 - Ramalho, O. A1 - Goschnick, J. A1 - Jann, Oliver A1 - Horn, Wolfgang A1 - Nesa, D. A1 - Chanie, E. A1 - Ruponen, M. T1 - Messung der empfundenen Geruchsintensität mit Multigas-Sensorsystemen, das Forschungsvorhaben SysPAQ KW - Geruch KW - Sensorsystem KW - Perceived Air Quality KW - Produkttypischer Geruch KW - Bauprodukte KW - Emissionen PY - 2007 SN - 978-3-18-091995-9 SN - 0083-5560 IS - 1995 SP - 17 EP - 29 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-16370 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kasche, J. A1 - Dahms, A. A1 - Horn, Wolfgang A1 - Jann, Oliver A1 - Müller, D. T1 - Sensory evaluation of building products - Results of a German round robin test T2 - VDI-Tagung CY - Bad Kissingen, Deutschland DA - 2007-11-13 KW - Bauprodukte KW - Emissionen KW - Geruch KW - AbBB-Schema KW - Kammermessungen KW - Blauer Engel PY - 2007 SN - 978-3-18-091995-9 SN - 0083-5560 IS - 1995 SP - 193 EP - 202 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-16322 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brandt, S. A1 - Plehn, W. A1 - Horn, Wolfgang A1 - Jann, Oliver T1 - Möglichkeiten und Grenzen der Bewertung und Kennzeichnung geruchsarmer Bauprodukte und Einrichtungen T2 - VDI-Tagung CY - Bad Kissingen, Deutschland DA - 2007-11-13 KW - Bauprodukte KW - Emissionen KW - Geruch KW - AbBB-Schema KW - Kammermessungen KW - Blauer Engel PY - 2007 SN - 978-3-18-091995-9 SN - 0083-5560 IS - 1995 SP - 181 EP - 191 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-16321 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jann, Oliver A1 - Wilke, Olaf T1 - Sampling and analysis of wood preservatives in test chambers PY - 1999 SN - 3-527-29622-0 SP - 31 EP - 43 PB - Wiley-VCH CY - Weinheim AN - OPUS4-7200 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Plehn, W. A1 - Jann, Oliver A1 - Wilke, Olaf A1 - Brödner, Doris ED - Säteri, O. T1 - Eco-Label for low emission wood products and wood base products (RAL-UZ-38) - Part 1: Criteria and requirements for labeling T2 - Healthy Buildings 2000 Conference CY - Espoo, Finland DA - 2000-08-06 PY - 2000 SN - 952-5236-06-4 VL - 4 SP - 519 EP - 524 PB - SIY Indoor Air Information CY - Helsinki AN - OPUS4-7206 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jann, Oliver A1 - Wilke, Olaf A1 - Brödner, Doris A1 - Plehn, W. ED - Säteri, O. T1 - Eco-Label for low emission wood products and wood base products (RAL-UZ-38) - Part 2: Test procedure and results T2 - Healthy Buildings 2000 Conference CY - Espoo, Finland DA - 2000-08-06 PY - 2000 SN - 952-5236-06-4 VL - 4 SP - 525 EP - 530 PB - SIY Indoor Air Information CY - Helsinki AN - OPUS4-7205 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilke, Olaf A1 - Jann, Oliver A1 - Brödner, Doris ED - Säteri, O. T1 - Investigations on the emission behavior of low-emitting adhesives for flooring materials T2 - Healthy Buildings 2000 Conference CY - Espoo, Finland DA - 2000-08-06 PY - 2000 SN - 952-5236-06-4 VL - 4 SP - 391 EP - 396 PB - SIY Indoor Air Information CY - Helsinki AN - OPUS4-7207 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Horn, Wolfgang A1 - Müller, B. A1 - Jann, Oliver A1 - Kasche, J. A1 - Däumling, C. A1 - Kalus, Sabine A1 - Brödner, Doris T1 - Emission and odour measurement of construction products evaluated using a german construction product evaluation scheme T2 - Indoor Air 2005 CY - Beijing, PR China DA - 2005-09-04 KW - AgBB-Scheme KW - Construction product KW - VOC emission KW - Odour KW - Chamber test PY - 2005 SN - 7-89494-830-6 IS - 2 SP - 2129 EP - 2133 PB - Tsinghua University Press CY - Beijing AN - OPUS4-10913 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, B. A1 - Müller, D. A1 - Horn, Wolfgang A1 - Jann, Oliver T1 - The use of gas sampling bags for evaluating the odours of building materials T2 - Indoor Air 2005 CY - Beijing, PR China DA - 2005-09-04 KW - Bauprodukte KW - Emissionen KW - Geruch KW - Probenahmebehälter PY - 2005 SN - 7-89494-830-6 IS - 2 SP - 2030 EP - 2034 PB - Tsinghua University Press CY - Beijing AN - OPUS4-11073 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilke, Olaf A1 - Jann, Oliver A1 - Brödner, Doris A1 - Rother, Ingrid T1 - Comparison of different types of emission test chambers and cells regarding VOC- and SVOC-emission T2 - Indoor Air 2005 CY - Beijing, PR China DA - 2005-09-04 KW - Emission KW - Chamber KW - Cell KW - Building product KW - VOC KW - SVOC PY - 2005 SN - 7-89494-830-6 IS - 2 SP - 6 pages PB - Tsinghua University Press CY - Beijing AN - OPUS4-11075 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jann, Oliver A1 - Rockstroh, Jens A1 - Wilke, Olaf T1 - Influence of emissions from hardcopy devices to indoor air quality T2 - Indoor Air 2005 CY - Beijing, PR China DA - 2005-09-04 KW - VOC KW - TVOC KW - Dust KW - Ozone KW - Hardcopy devices PY - 2005 SN - 7-89494-830-6 IS - 2 SP - 6 pages PB - Tsinghua University Press CY - Beijing AN - OPUS4-11074 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jann, Oliver ED - Czichos, Horst ED - Tetsuya Saito, ED - Leslie Smith, T1 - Emissions from Materials KW - Emissions KW - Materials KW - VOC KW - SVOC KW - Test chambers PY - 2006 SN - 978-3-540-20785-6 IS - Part D / 15.2 SP - 804 EP - 812 PB - Springer CY - Berlin AN - OPUS4-13784 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Seeger, Stefan A1 - Wilke, Olaf A1 - Bücker, Michael A1 - Jann, Oliver T1 - Time- and Size-Resolved Characterization of Particle Emissions from Office Machines with Printing Function T2 - Healthy Buildings 2006 CY - Lisboa, Portugal DA - 2006-06-04 KW - Hard copy devices KW - Laserprinters KW - Toner KW - Particle emissions KW - Particles KW - Aerosols PY - 2006 SN - 978-989-95067-1-8 VL - 2 SP - 447 EP - 450 CY - Lissabon AN - OPUS4-14522 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kannengießer, Thomas T1 - Zerstörende Prüfung von Schweißnähten nach der europäischen Normung PY - 2003 SN - 3-87155-682-3 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 224 SP - 87 EP - 93 PB - DVS-Verl. CY - Düsseldorf AN - OPUS4-2837 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hahn, Oliver A1 - Nöller, Renate ED - Bausi, A. T1 - Pigments and dyes N2 - The present volume is the main achievement of the Research Networking Programme ‘Comparative Oriental Manuscript Studies’, funded by the European Science Foundation in the years 2009–2014. It is the first attempt to introduce a wide audience to the entirety of the manuscript cultures of the Mediterranean East. The chapters reflect the state of the art in such fields as codicology, palaeography, textual criticism and text editing, cataloguing, and manuscript conservation as applied to a wide array of language traditions including Arabic, Armenian, Avestan, Caucasian Albanian, Christian Palestinian Aramaic, Coptic, Ethiopic, Georgian, Greek, Hebrew, Persian, Slavonic, Syriac, and Turkish. Seventy-seven scholars from twenty-one countries joined their efforts to produce the handbook. The resulting reference work can be recommended both to scholars and students of classical and oriental studies and to all those involved in manuscript research, digital humanities, and preservation of cultural heritage. The volume includes maps, illustrations, indexes, and an extensive bibliography. KW - Pigments KW - Dyes PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-447833 UR - https://www.aai.uni-hamburg.de/en/comst/publications/handbook.html SN - 978-3-7323-1768-4 SN - 978-3-7323-1769-1 SN - 978-3-7323-1770-7 DO - https://doi.org/10.5281/zenodo.46784 SP - 75 EP - 77 PB - European Science Foundation CY - Hamburg AN - OPUS4-44783 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bradley, Ian A1 - Otremba, Frank A1 - Scarponi, G. E. A1 - Romero-Navarrete, José A. ED - Ao, S.-I. ED - Kim, H. K. ED - Amouzegar, M. A. T1 - Boiling and thermohydraulics within pressure vessels N2 - Exposure of pressure vessels to fire can result in catastrophic explosion and escalation of accidents. The safe transportation of cargo in pressure vessels therefore requires knowledge of what will happen to the cargo in the event of a vehicle derailment or rollover resulting in fire exposure. The chapter presents an overview of selected testing and modelling work undertaken to understand the thermohydraulic processes within a vessel that drive pressurization during fire. A series of experiments highlighting the importance of adequate design and selection of protection systems are summarized. It is concluded that pressure relief alone is typically insufficient to prevent vessel rupture, but the combination of relief and thermal coatings can be effective. KW - BLEVE KW - Explosion KW - LPG KW - PIV KW - Pressure vessel KW - Thermohydraulics PY - 2020 SN - 978-981-15-6847-3 SN - 978-981-15-6848-0 DO - https://doi.org/https://doi.org/10.1007/978-981-15-6848-0_13 SP - 158 EP - 172 PB - Springer Nature CY - Singapore AN - OPUS4-51138 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lorenz, Stephan A1 - Kannengießer, Thomas T1 - Strain field measurement on laser-GMA-hybrid welded joints T2 - JOM 15 - 15th International Conference on the Joining of Materials / 6th International Conference on Education in Welding ICEW-6 CY - Helsingor, Denmark DA - 2009-05-03 KW - Laser-GMA-hybrid welding KW - Metal cored wire electrode KW - Strain field measurement KW - Transverse tensile test KW - AISI 304L PY - 2009 SN - 87-89582-17-9 SP - 1 EP - 9(?) AN - OPUS4-19432 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kannengießer, Thomas A1 - Wolf, Martin A1 - Schobbert, Helmut T1 - Recent developments in nickel base material welding considering the influence of shielding gas on the hot cracking resistance T2 - Stainless Steel World America 2004 Conference & Expo CY - Houston, TX, USA DA - 2004-10-20 KW - Nickel base material KW - Welding KW - Shielding gas KW - Hot cracking resistance PY - 2004 SN - 90-73168-23-6 SP - 156 EP - 167 PB - KCI Publ. BV CY - Zutphen AN - OPUS4-4581 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kromm, Arne A1 - Kannengießer, Thomas ED - Borsutzki, M. T1 - Anwendung des neuen Controlled Tensile Weldability (CTW) Tests zur Untersuchung der Heißrissneigung T2 - Tagung Werkstoffprüfung 2006 CY - Bad Neuenahr, Deutschland DA - 2006-12-07 KW - Heißrisstest KW - 1.4565 KW - Heißrissneigung KW - Dehnung KW - Dehngeschwindigkeit KW - Heißriss KW - Erstarrungsriss KW - Konstruktiver Einfluss PY - 2006 SN - 3-514-00734-9 SP - 451 EP - 456 PB - Stahleisen CY - Düsseldorf AN - OPUS4-14362 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lorenz, Stephan A1 - Kannengießer, Thomas A1 - Herold, H. A1 - Posch, G. T1 - Laser-GMA-hybrid welding with high alloyed cored wire electrodes T2 - Stainless Steel World 2007 Conference CY - Maastricht, The Netherlands DA - 2007-11-06 KW - Laser-GMA-hybrid welding KW - Solid-state laser KW - Tubular cored wire electrodes KW - Solid wire electrodes KW - High alloyed steel AISI 304L KW - Welding metallurgy PY - 2007 SN - 9789073168282 IS - CD-ROM SP - 1 EP - 16 AN - OPUS4-16184 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lorenz, Stephan A1 - Kannengießer, Thomas A1 - Posch, G. ED - Karoly Jarmai, ED - Jozsef Farkas, T1 - Solid wire vs. flux cored wire - comparing investigations for GMA-laser-hybrid welding T2 - Design, Fabrication and Economy of Welded Structures - International Conference CY - Miskolc, Hungary DA - 2008-04-24 KW - Tubular cored electrode KW - Solid wire electrode KW - GMA-laser-hybrid welding KW - Structural optimization KW - Fatigue design KW - Frames KW - Hollow sections KW - Plated structures PY - 2008 SN - 978-1-904275-28-2 SP - 477 EP - 484 PB - Horwood Publishing Ltd. AN - OPUS4-17509 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lorenz, Stephan A1 - Kannengießer, Thomas A1 - Herold, H. A1 - Posch, G. ED - P. Mayr, ED - G. Posch, ED - H. Cerjak, T1 - Aspects of positional laser-GMA-hybrid welding using high alloyed tubular cored wire electrodes T2 - 61st Annual Assembly and International Conference of the International Institute of Welding (IIW) "Safety and Reliability of Welded Components in Energy and Processing Industry" CY - Graz, Austria DA - 2008-07-06 KW - Laser-GMA-hybrid welding KW - Positional welding KW - Vertical position KW - Metal cored wire electrode KW - Rutile tubular cored wire KW - Solid wire PY - 2008 SN - 978-3-85125-019-0 SP - 479 EP - 484 PB - Verlag der Technischen Universität Graz CY - Graz, Austria AN - OPUS4-17800 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kemmlein, Sabine A1 - Hahn, Oliver A1 - Jann, Oliver A1 - Kalus, Sabine A1 - Stolle, Dirk ED - Wai, T. K. ED - Sekhar, C. ED - Cheong, D. T1 - Emission of phosphorus organic and polybrominated flame retardants from consumer products and building materials T2 - 7th Healthy Buildings Conference ; HB 2003 ; ISIAQ international conference CY - Singapore, Republic of Singapore DA - 2003-12-07 KW - Flame retardants KW - SVOC/POM KW - Material emission PY - 2003 SN - 981-049974-4 VL - 1 SP - 142 EP - 147 CY - Singapore AN - OPUS4-7066 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neumann, Martin A1 - Wille, Frank ED - Topping, B. H. V. ED - M. Papadrakakis, T1 - Simulation of the Crushing of Wood Filled Impact Limiters for Packages of Radioactive Material N2 - Mechanical and thermal safety assessment of packages for transport of radioactive material in Germany is carried out by the Federal Institute for Materials Research and Testing (BAM). Both experimental and computational (analytical, numerical) methods combined with material and/or component tests are the basis for the state of the art safety assessment concept at BAM. The required mechanical tests according to IAEA regulations include, among others, a 9-m-drop-test on an unyielding target. Impact limiting components, which are attached to the cask at both ends, limit forces applied on the cask body and lid system by absorbing a major part of the impact energy. In Germany, impact limiters of packages for transport of radioactive materials are typically of steel-wood-sandwich construction, combining a relatively stiff steel structure bolted to the cask body, outer steel plates and different types of wood. By crushing the wood-steel-sandwich-structure between an unyielding target and the cask, the kinetic energy of a 9-m-free-fall is absorbed. The main energy absorber is wood under a high level of deformation. Wood under large deformations exhibits destruction of the fibre matrix. By analysing compression of the impact limiter wood after the drop tests with prototype casks for radioactive material, underlying mechanisms of wood crushing and corresponding energy absorption under large deformations are identified. Softening occuring at compression of the wood is a function of the lateral strain restriction of wood. Against the background of continuum mechanics an analogous model for compression of the fibre bundle is presented. The model takes the lateral strain restriction as triaxiality of the stress state into account. Further modelling possibilities for wood with a continuum approach are described. Different material laws in the explicit finite element code LS-DYNA are analysed for possible application using the analogous model for the fibre bundle. Small scale compression tests with wooden specimens are modelled in order to evaluate the ability of different modelling techniques to simulate softening. Although modelling of the compression of wood under large deformations is possible, softening could not be simulated purposefully. A drop test of a cask with impact limiting devices similar to existing impact limiters is simulated with different material laws for wood. The behaviour of impact limiting devices could not be simulated universally including the influence of the lateral strain restriction; nevertheless loading of the cask by crushing of the impact limiter could be simulated purposefully. Verification with experimental results is essential. T2 - 9th International Conference on Computational Structures Technology CY - Athens, Greece DA - 2008-09-02 KW - Radioactive material KW - Transport KW - Impact limiter KW - Simulation KW - FEM PY - 2008 SN - 978-1-905088-22-5 IS - Paper 22 SP - 1 EP - 21 PB - Civil Comp Press CY - Stirlingshire, Scotland, UK AN - OPUS4-17891 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiegner, Katharina A1 - Farke, M. A1 - Horn, Wolfgang A1 - Jann, Oliver A1 - Hahn, Oliver ED - Brozio, P. T1 - Schadstoffe im Museum richtig einschätzen N2 - Schadstoffe beschäftigen derzeit Museen weltweit Heute weiß man, dass diese auch aus Materialien, die für den Ausstellungsbau verwendet werden, austreten können, was eine Gefahr für Exponate darstellt. Ein neues Verfahren namens BEMMA bietet nun erstmalig die Möglichkeit, relativ schnell und effektiv eine problemorientierte Untersuchung und Bewertung mit belastbaren und reproduzierbaren Ergebnissen vorzunehmen. KW - Emissionsarme Vitrinen KW - Präventive Konservierung KW - VOC KW - BEMMA PY - 2011 SN - 978-3-7667-1962-1 SP - 127 EP - 131 PB - Callwey CY - München AN - OPUS4-25377 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ketelsen, T. A1 - Golle, U. A1 - Hahn, Oliver A1 - Wintermann, C. ED - Hahn, Oliver ED - Doil, Thorsten T1 - Katalog der Rembrandt-Zeichnungen in Weimar N2 - Hiermit liegt der kritische Katalog aller Rembrandt-Zeichnungen in der Klassik Stiftung Weimar vor. Im Unterschied zu vielen anderen Graphischen Kabinetten, die ihre Rembrandt-Bestände bereits erfolgreich publiziert haben, existierte eine solche Gesamtschau in Weimar bisher nicht. Die umfassten 51 Katalognummern umfassen alle aktuell Rembrandt zugeschriebenen Blätter, alle rembrandtesken Zeichnungen, die ehemals als Werk Rembrandts angesehen wurden, aber auch alle Zeichnungen, die einmal mit Rembrandt und seiner Schule in Verbindung gebracht wurden. T2 - Rembrandt in Weimar - Ein Beitrag zur Neujustierung der Kennerschaft CY - Weimar, Germany DA - 20.03.2025 KW - Katalog KW - Materialität KW - Rembrandt KW - Zeichnung PY - 2025 SN - 2567-1251 N1 - Serientitel: N.i.Ke. Schriftenreihe des Netzwerks zur interdisziplinären Kulturguterhaltung – Series title: N.i.Ke. Schriftenreihe des Netzwerks zur interdisziplinären Kulturguterhaltung VL - 6 SP - 57 EP - 217 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-63618 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ketelsen, T. A1 - Hahn, Oliver ED - Hahn, Oliver ED - Doil, Thorsten T1 - Von 25 auf 6: Der Bestand der Rembrandt-Zeichnungen in Weimar N2 - Das Rembrandt-Projekt ist ein Teilresultat, das aus der dreijährigen Katalogisierung der niederländischen und flämischen Zeichnungen in den Graphischen Sammlungen erwachsen ist. Es umfasst alle heute Rembrandt zugeschriebenen Blätter, alle rembrandtesken Zeichnungen, die ehemals als Rembrandts angesehen wurden, aber auch alle Zeichnungen, die einmal mit Rembrandt und seiner Schule in Verbindung gebracht wurden. T2 - Rembrandt in Weimar - Ein Beitrag zur Neujustierung der Kennerschaft CY - Weimar, Germany DA - 20.03.2025 KW - Katalog KW - Materialität KW - Rembrandt KW - Zeichnung PY - 2025 SN - 2567-1251 N1 - Serientitel: N.i.Ke. Schriftenreihe des Netzwerks zur interdisziplinären Kulturguterhaltung – Series title: N.i.Ke. Schriftenreihe des Netzwerks zur interdisziplinären Kulturguterhaltung VL - 6 SP - 10 EP - 12 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-63576 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ludwig, A. A1 - Eggert, Claudia ED - Hahn, Oliver ED - Doil, Thorsten T1 - Einführung N2 - Der vorliegende, sechste Band der N.i.Ke.-Schriftenreihe zum Workshop "Rembrandt in Weimar - Ein Beitrag zur Neujustierung der Kennerschaft", den die Museen der Klassik Stiftung Weimar am 20./21.3.2025 gemeinsam mit der Bundesanstalt für Materialforschung und -prüfung (BAM) im Goethe-Nationalmuseum ausrichtet, ist jenen 51 Blättern aus der Sammlung der Museen der Klassik Stiftung Weimar gewidmet, die einst als Konvolut authentischer Rembrandt-Zeichnungen galten, inzwischen aber als eigenhändige Arbeiten erkannt oder Werken von Adepten oder Schülern des Niederländischen Meister zugeschrieben werden konnten. T2 - Rembrandt in Weimar - Ein Beitrag zur Neujustierung der Kennerschaft CY - Weimar, Germany DA - 20.03.2025 KW - Katalog KW - Materialität KW - Rembrandt KW - Zeichnung PY - 2025 SN - 2567-1251 N1 - Serientitel: N.i.Ke. Schriftenreihe des Netzwerks zur interdisziplinären Kulturguterhaltung – Series title: N.i.Ke. Schriftenreihe des Netzwerks zur interdisziplinären Kulturguterhaltung VL - 6 SP - 9 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-63539 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kalbe, Ute A1 - Müller, Werner A1 - Berger, Wolfgang A1 - Tatzky-Gerth, Renate A1 - Eckardt, Jürgen ED - Sarsby, R. T1 - Transport of organic pollutants in composite liners T2 - 3rd International Symposium on Geotechnics Related to the European Environment ; 3rd GREEN CY - Berlin, Germany DA - 2000-06-21 KW - Composite liner KW - Contaminant transport modelling PY - 2001 SN - 0-7277-3004-5 SP - 141 EP - 147 PB - Telford CY - London AN - OPUS4-1349 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reinsch, Stefan A1 - Müller, Ralf T1 - Herstellung von Gläsern mittlerer Wassergehalte T2 - 79. Glastechnische Tagung CY - Würzburg, Deutschland DA - 2005-05-23 KW - Glas KW - Wassergehalt PY - 2005 SN - 3-921089-43-3 SP - 4 Seiten PB - Deutsche Glastechnische Gesellschaft CY - Offenbach AN - OPUS4-7606 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Eberstein, Markus A1 - Thiel, A. A1 - Reinsch, Stefan A1 - Müller, Ralf A1 - Deubener, J. A1 - Schiller, Wolfgang Arno T1 - Lösungs- und Kristallisationsvorgänge beim Sintern von Glasmatrix-Kompositen T2 - 79. Glastechnische Tagung CY - Würzburg, Deutschland DA - 2005-05-23 KW - Glaspulver KW - Glasmatrix-Komposit KW - Sintern KW - Kristallisation PY - 2005 SN - 3-921089-43-3 SP - 7 Seiten PB - Deutsche Glastechnische Gesellschaft CY - Offenbach AN - OPUS4-10377 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Eberstein, Markus A1 - Thiel, A. A1 - Reinsch, Stefan A1 - Müller, Ralf A1 - Deubener, J. A1 - Schiller, Wolfgang Arno T1 - Sinterkinetik von Glasmatrix-Kompositen mit reaktiver Dispersphase T2 - 80. Glastechnische Tagung CY - Dresden, Deutschland DA - 2006-06-12 PY - 2006 SN - 3-921089-46-8 SP - 4 Seiten PB - Verl. d. Dt. Glastechn. Ges. CY - Offenbach AN - OPUS4-14046 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kinet, D. A1 - Witt, Jens A1 - Grillet, A. A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - Giannone, D. A1 - Pirotte, F. T1 - Silica Fibre Bragg Grating Sensor Embedded into a Textile Fabric for Large Strain Applications N2 - A FBG written on standard silica fibre, with coating transparent at 248nm, was integrated on an elastic textile fabric. The so-formed optical gauge showed a linear relationship when strained up to 40%. T2 - Bragg Gratings, Photosensitivity and Poling in Glass Waveguides (BGPP) and Nonlinear Photonics (NP) Topical Meeting and Tabletop Exhibit 2007 CY - Quebec City, Quebec, Canada DA - 2007-09-02 KW - Silica Fibre KW - Fibre Bragg Grating KW - Fibre Optic Sensor KW - Strain Sensor KW - FBG KW - Textile Fabric KW - Large Strain Application PY - 2007 SN - 1-55752-847-0 SP - 1 EP - 3 AN - OPUS4-16008 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Albers, K. A1 - Müller, Werner ED - Ramke, Hans-Günter ED - Witt, Karl-Josef ED - Bräcker, Wolfgang ED - Tiedt, Michael T1 - Kunststoffdichtungsbahnen als Abdichtungselement in Oberflächenabdichtungssystemen T2 - Status-Workshop "Anforderungen an Deponie-Oberflächenabdichtungssysteme" CY - Höxter, Deutschland DA - 2006-11-30 KW - Kunststoffdichtungsbahnen KW - Deponien KW - Zulassungen PY - 2007 SN - 3-9807985-5-0 VL - 06 SP - 65 EP - 85 CY - Höxter AN - OPUS4-16079 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reinsch, Stefan A1 - Meng, S. A1 - Eberstein, Markus A1 - Thiel, A. A1 - Müller, Ralf A1 - Deubener, J. T1 - Partial Solution of Dispersed alpha-Al2O3-Particles in Alumoborosilicate Glass T2 - 81. Glastechnische Tagung CY - Aachen, Deutschland DA - 2007-06-04 KW - Glasmatrixkomposite KW - Lösung KW - Sintern PY - 2007 SN - 978-3-921089-52-1 IS - CD-ROM SP - 1 EP - 5 PB - Deutsche Glastechnische Gesellschaft CY - Offenbach AN - OPUS4-16108 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - Scheer, M. ED - Gerald Gerlach, ED - Peter Hauptmann, T1 - Faser-Bragg-Gitter-Sensoren überwachen Strahlung am Elektronenspeicherring BESSY II T2 - 8. Dresdner Sensor-Symposium CY - Dresden, Deutschland DA - 2007-12-10 KW - Faser-Bragg-Gitter KW - Fasersensoren KW - Strahlungssensoren KW - Strahlungseffekte KW - Strahlungsdosimetrie KW - Elektronenspeicherring PY - 2007 SN - 978-3-940046-45-1 N1 - Serientitel: Dresdner Beiträge zur Sensorik – Series title: Dresdner Beiträge zur Sensorik IS - 29 SP - 141 EP - 144 PB - TUDpress, Verlag der Wissenschaften GmbH CY - Dresden AN - OPUS4-16375 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thies, Martina A1 - Gerloff, Constantin A1 - Müller, Werner A1 - Seeger, Stefan ED - Koerner, R. ED - Gartung, E. ED - Zanzinger, H. T1 - Long-term shear testing of geosynthetic clay liners T2 - International Symposium [on Clay Geosynthetic Barriers] IS CY - Nuremberg, Germany DA - 2002-04-16 PY - 2002 SN - 90-5809-380-8 SP - 97 EP - 104 PB - Balkema CY - Lisse AN - OPUS4-1362 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Seeger, Stefan A1 - Müller, Werner A1 - Mohr, Kerstin ED - Delmas, P. T1 - Long term tensile testing of polyolefin fibers in geotextiles T2 - 7th International Conference on Geosynthetics (ICG) CY - Nice, France DA - 2002-09-22 PY - 2002 SN - 90-5809-529-0 VL - 4 SP - 1459 EP - 1462 PB - Balkema CY - Lisse AN - OPUS4-1532 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Peplinski, Burkhard A1 - Müller, Ralf A1 - Wenzel, Klaus-Jürgen A1 - Sojref, Regine A1 - Schultze, Dietrich ED - Delhez, R. T1 - An X-ray powder diffration investigation of a fine-grained synthetic a-cordierite powder T2 - 6th European Powder Diffraction Conference CY - Budapest, Hungary DA - 1998-08-22 KW - Alpha-cordierite KW - Indialite KW - Standard material KW - Back-filling specimen mount technique PY - 2000 SN - 0-87849-847-8 SN - 0255-5476 SP - 150 EP - 155 PB - Trans Tech Publ. CY - Uetikon-Zürich AN - OPUS4-1195 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reinsch, Stefan A1 - Schadrack, Reinhard A1 - Müller, Ralf A1 - Behrens, H. A1 - Deubener, J. T1 - Bestimmung der Glastransformationstemperatur wasserhaltiger Gläser T2 - 80. Glastechnische Tagung CY - Dresden, Deutschland DA - 2006-06-12 PY - 2006 SN - 3-921089-46-8 SP - 1(?) EP - 5(?) PB - Verl. d. Dt. Glastechn. Ges. CY - Offenbach AN - OPUS4-12552 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reinsch, Stefan A1 - Müller, Ralf A1 - Eberstein, Markus A1 - Deubener, J. A1 - Thiel, A. A1 - Schiller, Wolfgang Arno ED - J.G. Heinrich, ED - C.G. Aneziris, T1 - Effect of dispersed Al2O3 particles on sintering of glass matrix composites T2 - 10th International Conference of the European Ceramic Society CY - Berlin DA - 2007-06-17 KW - LTCC KW - Glass matrix composites KW - Inclusions KW - Sintering kinetics KW - Modelling PY - 2007 SN - 3-87264-022-4 SP - 290 EP - 295 PB - Göller CY - Baden-Baden AN - OPUS4-17445 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Werner A1 - Seeger, Stefan A1 - Thies, Martina T1 - Langzeit-Scherfestigkeit von Geokunststoffen aus mehreren Komponenten T2 - 11. Braunschweiger Deponie- und Dichtwandseminar ; 11. Braunschweiger Deponieseminar CY - Braunschweig, Deutschland DA - 2004-03-11 KW - Scherfestigkeit KW - Beständigkeit KW - Geokunststoffe KW - Prüftechnik PY - 2004 UR - http://www.deponie-stief.de/pdf/fachlit_pdf/2004tubs_mueller_scherfestigkeit.pdf SN - 3-927610-65-8 IS - 74 SP - 213 EP - 231 PB - Inst. für Grundbau und Bodenmechanik, TU Braunschweig CY - Braunschweig AN - OPUS4-3361 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Burkert, Andreas A1 - Heyn, Andreas A1 - Ebell, Gino A1 - Lehmann, Jens A1 - Müller, Thoralf A1 - Mietz, Jürgen A1 - Fischer, Joachim T1 - Innovative Methoden in der Korrosionsforschung an der BAM N2 - Im Zusammenhang mit Planungs- und Entwicklungsaufgaben, den Forderungen in Normen und Regelwerken, in betrieblichen Arbeitsanweisungen, den Vorgaben für Zulieferteile oder bei der Auseinandersetzung mit Schadensfällen stellen sich häufig Fragen zum Korrosionsschutz sowie zu entsprechenden Prüf- und Untersuchungsverfahren. Die daraus gewonnenen Ergebnisse sollen z. B. eine Eignung von Werkstoffen oder Schutzsystemen unter spezifischen Einsatzbedingungen, die Dauerhaftigkeit des Schutzes, den Nachweis einer gleichbleibenden Qualität, die Vergleichbarkeit bekannter mit neuen Korrosionsschutzkonzepten oder den Wirkungsnachweis für gezielte Systemeingriffe belegen. Schnell wird deutlich, dass sich aus dem Blickwinkel verschiedener Branchen ganz unterschiedliche Anforderungsprofile ergeben, die ihren Niederschlag dann in unterschiedlichen Strategien der Prüf- und Untersuchungsverfahren finden. PY - 2014 SN - 978-3-00-044008-3 SP - 2-1 EP - 2-26 AN - OPUS4-32753 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bretz, S. A1 - Hagnau, C. A1 - Hahn, Oliver A1 - Ranz, H.-J. ED - Bretz, S. ED - Hagnau, C. ED - Hahn, Oliver ED - Ranz, H.-J. T1 - Kunsthistorische, kunsttechnologische und materialanalytische Untersuchungen an deutscher und niederländischer Hinterglasmalerei von 1300 bis 1600 N2 - Die wissenschaftliche Auseinandersetzung mit Kunst- und Kulturgut schließt neben kunsthistorischen Untersuchungen zunehmend kunsttechnologische und materialwissenschaftliche Analysen mit ein. Der folgende Beitrag fasst die Erkenntnisse der fächerübergreifenden Forschung an deutschen und niederländischen Hinterglasmalereien des 14. bis 16. Jahrhunderts zusammen und soll einen Beitrag zur Neubewertung der Kunstgattung leisten. Nach einer Positionsbestimmung der Hinterglasmalerei gegenüber der Glas- und Tafelmalerei wird auf den Herstellungsprozess ein gegangen, wobei eine detaillierte Beschreibung der Ausgestaltung von Hinterglasbildern mit Schwarzlot, Lüsterfarben und Blattmetallen (Eglomisé) sowie deckenden Malfarben vorgenommen wird. KW - Archäometrie KW - Kunst- und Kulturgut KW - ZfP PY - 2016 SN - 978-3-422-07262-6 SP - 46 EP - 67 PB - Deutscher Kunstverlag CY - Berlin AN - OPUS4-63590 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bretz, S. A1 - Hagnau, C. A1 - Hahn, Oliver A1 - Ranz, H.-J. ED - Bretz, S. ED - Hagnau, C. ED - Hahn, Oliver ED - Ranz, H.-J. T1 - Glas als Bildträger und Rahmungen in der spätmittelalterlichen Hinterglasmalerei N2 - Da in der Hinterglasmalerei der durchsichtige Malgrund und Bildträger stets sichtbar bleibt, kam der Auswahl des Glases eine große Bedeutung zu. Glasmaler wie auch Hinterglasmaler strebten danach, qualitätvolles Glas zu bearbeiten, welches optische Verzerrungen und Spitzlichter ausschloss. Untersuchungen an Hinterglasbildern aus dem 14. bis 16. Jahrhundert zeigen, dass dies bei spätmittelalterlichen Gläsern nicht immer der Fall war. An den gläsernen Bildträgern lassen sich aufgrund typischer Beschaffenheitsmerkmale wie oberflächlicher Unebenheiten und Schlieren, Abdruckspuren des eingesetzten Arbeitswerkzeuges, eingeschlossener Gasbläschen und bearbeiteter Kanten Rückschlüsse auf die Methode ihrer Herstellung ziehen. Die fragilen Glastafeln verlangen nach schützenden Rahmungen, die in verschiedenen Konstruktionsformen als hölzerne Rahmen und/oder Bleiruten ausgeführt wurden. Der untersuchte Bestand an Hinterglasgemälden umfasst zumeist Einzelbilder, doch sind auch Triptychen und ein Deckelkästchen mit Hinterglaseinlagen vertreten. KW - Archäometrie KW - Kunst- und Kulturgut KW - ZfP PY - 2016 SN - 978-3-422-07262-6 SP - 102 EP - 109 PB - Deutscher Kunstverlag CY - Berlin AN - OPUS4-63592 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bretz, S. A1 - Hagnau, C. A1 - Hahn, Oliver A1 - Ranz, H.-J. ED - Bretz, S. ED - Hagnau, C. ED - Hahn, Oliver ED - Ranz, H.-J. T1 - Nachahmung oder Fälschung? Hinterglasbilder aus dem Spätmittelalter oder dem 19. Jahrhundert N2 - Die kunsthistorische Forschung befasst sich immer wieder mit der Frage, ob es sich bei Kunstwerken um Originale, Kopien oder Fälschungen handelt. Die Kunstfälschung hat eine lange Tradition und wurde in allen Gattungen ausgeübt. Handelt es sich bei einer Fälschung um die getreue Wiedergabe eines Originals oder die Neuschöpfung eines Kunstwerks als Imitation einer gewissen Zeitspanne mit betrügerischer Intention, so stehen dem die Kopie und die eigene künstlerische Schöpfung entgegen. Insbesondere im 19. Jahrhundert war bedingt durch die intensive Sammelleidenschaft die Nachfrage nach erlesenen Kunstwerken sehr hoch, ebenso wie die Konkurrenz der Sammler untereinander. Und so verführte die Spezialisierung auf ein Sammelgebiet Händler dazu, immer mehr Ware herbeizuschaffen. Unter diesen Gesichtspunkten sind auch einige Werke der Hinterglasmalerei, die bislang dem 14. bis 16. Jahrhundert zugeordnet werden, hinsichtlich ihrer Datierung zu überprüfen. KW - Archäometrie KW - Kunst- und Kulturgut KW - ZfP PY - 2016 SN - 978-3-422-07262-6 SP - 128 EP - 135 PB - Deutscher Kunstverlag CY - Berlin AN - OPUS4-63594 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bretz, S. A1 - Hagnau, C. A1 - Hahn, Oliver A1 - Ranz, H.-J. ED - Bretz, S. ED - Hagnau, C. ED - Hahn, Oliver ED - Ranz, H.-J. T1 - Hinterglasmalerei des 14. bis 16. Jahrhunderts in weiteren Regionen Europas N2 - Die Produktion qualitätvoller Hinterglasbilder aus dem 14. bis 16. Jahrhundert beschränkte sich nicht auf die niederländischen und deutschen bzw. ober- bis niederrheinischen Kunstlandschaften. Es haben sich ebenso prachtvolle Werke aus Frankreich (Burgund), Süddeutschland und Italien erhalten. Da zusätzlich zu den diskutierten Katalognummern weitere Hinterglasbilder kunstwissenschaftlich und materialtechnologisch untersucht wurden, werden diese im Folgenden beispielhaft vorgestellt. KW - Archäometrie KW - Kunst- und Kulturgut KW - ZfP PY - 2016 SN - 978-3-422-07262-6 SP - 120 EP - 125 PB - Deutscher Kunstverlag CY - Berlin AN - OPUS4-63593 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bretz, S. A1 - Hagnau, C. A1 - Hahn, Oliver A1 - Ranz, H.-J. ED - Bretz, S. ED - Hagnau, C. ED - Hahn, Oliver ED - Ranz, H.-J. T1 - Einführung in die Hinterglasmalerei N2 - Die Hinterglasmalerei fand als Zwischengattung der Glas- und Tafelmalerei eher wenig Beachtung, war sie doch lange mit dem Begriff der Glasmalerei belegt. Dieses geschah jedoch zu Unrecht, wie die Auswahl an Hinterglasbildern, die in dieser Publikation vorgestellt wird, eindrucksvoll belegt. Auch wenn Glas in beiden Fällen das Trägermaterial darstellt, wird in der Hinterglasmalerei die Rückseite der Glastafel mit organisch gebundenen Malfarben verziert, während aufzubrennende Schmelzfarben das Glas in der Glasmalerei schmücken. Der wesentliche Unterschied offenbart sich in der Lichtführung: Hinterglasbilder werden ausschließlich bei auffallendem Licht betrachtet. Der Malvorgang bei hintermalten Gläsern verläuft grundsätzlich von vorne nach hinten, da der Malgrund zugleich die Schauseite darstellt. KW - Archäometrie KW - Kunst- und Kulturgut KW - ZfP PY - 2016 SN - 978-3-422-07262-6 SP - 12 EP - 13 PB - Deutscher Kunstverlag CY - Berlin AN - OPUS4-63562 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Descalzo López, Ana Belén A1 - Zhu, Shengchao A1 - Fischer, Tobias A1 - Rurack, Knut ED - Demchenko, A.P. T1 - Optimization of the coupling of target recognition and signal generation N2 - Fluorescent reporters that literally "light up" upon binding of a target species are particularly interesting from an analytical point of view. This contribution introduces the main signaling concepts in fluorescent probe research, discusses strategies toward their optimization in terms of signal output, and highlights the wealth of alternative protocols that has been realized in the past two decades to create signaling systems with luminescence amplification features. KW - Dyes KW - Fluorescence KW - FRET KW - Molecular Recognition KW - Nanoparticles PY - 2010 SN - 978-3-642-04699-5 DO - https://doi.org/10.1007/978-3-642-04701-5_2 N1 - Serientitel: Springer Series on Fluorescence – Series title: Springer Series on Fluorescence VL - 9 IS - 1 SP - 41 EP - 106 PB - Springer AN - OPUS4-21941 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rurack, Knut A1 - Martínez-Mánez, Ramon ED - Charles M. Lukehart, ED - Robert A. Scott, T1 - Biomimetic chemistry of hybrid materials N2 - The article discusses representative examples published in the field of functional biomimetic chemistry of hybrid materials between 2004 and mid-2007. First, we focus on the modification of morphological aspects of (bio)organic–inorganic hybrid materials to create sophisticated gating and switching mechanisms. The architecture of the systems is presented and the elements of control by external stimuli that have been established in recent years, such as optical, electrochemical, chemical, thermal, or magnetic means, are described. Various functions ranging from (site-specific) delivery to indication at the nanometric level are reported. Next we develop the idea of utilizing hybrid frameworks for biomimetic signaling inspired by the way nature has created binding pockets and the concept of induced-fit. Such a merging of inorganic scaffolds with supramolecular concepts results in enhanced molecular recognition and signaling. Finally selected recent advances in the field of hybrid biomimetic motors both of linear and rotary types are presented. The contribution shows how novel biomimetic functions can arise from synergisms between specifically designed hybrid materials and the implementation of supramolecular and/or bioorganic concepts. KW - Biochemie KW - Biomimetika KW - DNA KW - Gold KW - Hybridmaterialien KW - Molekulare Schalter KW - Molekulare Motoren KW - Nanopartikel KW - Quantenpunkte KW - Schalter KW - Sensorik KW - Silica KW - Supramolekulare Chemie PY - 2008 SN - 978-0470-51644-7 SP - 31 EP - 50 PB - Wiley CY - Chichester AN - OPUS4-19213 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rurack, Knut A1 - Martínez-Mánez, Ramon ED - Robert H. Crabtree, T1 - Functional supramolecular hybrid materials N2 - The combination of suitable nanoscopic inorganic supports with supramolecular concepts and bioconjugation strategies opens up exciting perspectives for the development of bioinorganic and organic–inorganic hybrid materials with improved functionalities. Many of the examples from the period 2004 to mid-2007 reviewed here bridge the gap between molecules, materials sciences, biochemistry, and nanotechnology. The synergistic use of these approaches has led to the advancement of various functions such as enhanced recognition, amplified signaling, the controlled assembly and disassembly of aggregates and 3-D architectures. Many of the implemented active functions can be carried out in a reversible and directed fashion on purpose by triggering with an external stimulus. These ideas bring tunability to properties of inorganic solids and new perspectives of application to biochemical and supramolecular concepts. Classic inorganic chemistries such as metal or semiconductor nanoparticles, silica or carbon materials, and coordination chemistry are thus elevated to another level of sophistication and contribute significantly to frontier research areas in directed transport and delivery, nanoelectronics and mechanics, chip technology, smart materials, memory devices, and bioanalytics. KW - Biochemie KW - Biomakromoleküle KW - DNA KW - Gold KW - Hybridmaterialien KW - Nanopartikel KW - Quantenpunkte KW - Selbstorganisation KW - Sensorik KW - Silica KW - Supramolekulare Chemie PY - 2009 DO - https://doi.org/10.1002/0470862106.ia400 SP - 1 EP - 23 PB - Wiley CY - Chichester AN - OPUS4-19847 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Resch-Genger, Ute A1 - Hoffmann, Katrin A1 - Pfeifer, Dietmar ED - Chris D. Geddes, T1 - Simple calibration and validation standards for fluorometry KW - Fluorescence KW - Standard KW - Spectral correction KW - Emission KW - Glass KW - Quantum yield KW - Fluorescence intensity KW - Quality assurance PY - 2009 SN - 978-0-387-88721-0 DO - https://doi.org/10.1007/978-0-387-88722-7_1 SN - 1573-8086 N1 - Serientitel: Reviews in Fluorescence – Series title: Reviews in Fluorescence VL - 4 SP - 1 EP - 31 PB - Springer Science + Business Media AN - OPUS4-19830 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Resch-Genger, Ute A1 - Grabolle, Markus A1 - Nitschke, R. A1 - Nann, T. ED - Demchenko, A.P. T1 - Nanocrystals and nanoparticles versus molecular fluorescent labels as reporters for bioanalysis and the life sciences: a critical comparison N2 - At the core of photoluminescence techniques are suitable fluorescent labels and reporters, the spectroscopic properties of which control the limit of detection, the dynamic range, and the potential for multiplexing. Many applications including recent developments in intracellular labeling rely on well established molecular chromophores such as small organic dyes or fluorescent proteins. However, one of the most exciting – but also controversial – advances in reporter technology, the emerging development and application of luminescent nanoparticles with unique optical properties, yet complicated surface chemistry paves new roads for fluorescence imaging and sensing as well as for in vitro and in vivo labeling. Here, we compare and evaluate the differences in physico-chemical properties of common fluorophores, focusing on traditional organic dyes and luminescent nanocrystals with size-dependent features. The ultimate goal is to provide a better understanding of the advantages and limitations of both classes of chromophores, facilitate fluorophore choice for users of fluorescence techniques, and address future challenges in the rational design and manipulation of nanoparticulate labels and probes. KW - Amplification KW - Fluorescent reporter KW - Fluorophore KW - FRET KW - In vitro KW - In vivo KW - Labeling KW - Lanthanide chelate KW - Multiplexing KW - Nanoparticle KW - Quantum dot KW - Transition metal complex PY - 2010 SN - 978-3-642-04699-5 DO - https://doi.org/10.1007/978-3-642-04701-5_1 N1 - Serientitel: Springer Series on Fluorescence – Series title: Springer Series on Fluorescence VL - 9 IS - 1 SP - 3 EP - 40 PB - Springer AN - OPUS4-22186 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rurack, Knut A1 - Martínez-Mánez, Ramon ED - Charles M. Lukehart, ED - Robert A. Scott, T1 - Functional Supramolecular Hybrid Materials N2 - The combination of suitable nanoscopic inorganic supports with supramolecular concepts and bioconjugation strategies opens up exciting perspectives for the development of bioinorganic and organic–inorganic hybrid materials with improved functionalities. Many of the examples from the period 2004 to mid-2007 reviewed here bridge the gap between molecules, materials sciences, biochemistry, and nanotechnology. The synergistic use of these approaches has led to the advancement of various functions such as enhanced recognition, amplified signaling, the controlled assembly and disassembly of aggregates and 3-D architectures. Many of the implemented active functions can be carried out in a reversible and directed fashion on purpose by triggering with an external stimulus. These ideas bring tunability to properties of inorganic solids and new perspectives of application to biochemical and supramolecular concepts. Classic inorganic chemistries such as metal or semiconductor nanoparticles, silica or carbon materials, and coordination chemistry are thus elevated to another level of sophistication and contribute significantly to frontier research areas in directed transport and delivery, nanoelectronics and mechanics, chip technology, smart materials, memory devices, and bioanalytics. KW - Biochemie KW - Biomakromoleküle KW - DNA KW - Gold KW - Hybridmaterialien KW - Nanopartikel KW - Quantenpunkte KW - Selbstorganisation KW - Sensorik KW - Silica KW - Supramolekulare Chemie PY - 2008 SN - 978-0470-51644-7 SP - 789 EP - 812 PB - Wiley CY - Chichester AN - OPUS4-19212 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rurack, Knut A1 - Martínez-Mánez, Ramon A1 - Sancenón, F. A1 - Descalzo López, Ana Belén ED - Rurack, Knut ED - Martínez-Mánez, Ramon T1 - Biomimetically inspired signaling KW - Bindungstaschen KW - Biochemie KW - Biomimetika KW - Chromatophore KW - Gold KW - Hybridmaterialien KW - Ionenkanäle KW - Metalloregulation KW - Nanopartikel KW - Quantenpunkte KW - Sensorik KW - Silica KW - Supramolekulare Chemie KW - Verdrängungsassays PY - 2010 SN - 978-0-470-37621-8 SP - 549 EP - 580 PB - John Wiley & Sons CY - Hoboken, New Jersey, USA AN - OPUS4-21960 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rettig, W. A1 - Rurack, Knut A1 - Sczepan, M. ED - Valeur, B. ED - Brochon, J.-C. ED - O.S. Wolfbeis, T1 - From cyanines to styryl bases-photophysical properties, photochemical mechanisms, and cation sensing abilities of charged and neutral polymethinic dyes KW - Cyaninfarbstoffe KW - Styrylfarbstoffe KW - Photophysik KW - Photochemie KW - Kationen KW - Sensor PY - 2001 SN - 3-540-67779-8 SN - 1617-1306 N1 - Serientitel: Springer Series on Fluorescence – Series title: Springer Series on Fluorescence VL - 1 SP - 125 EP - 155 PB - Springer CY - Berlin AN - OPUS4-2086 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hoffmann, Katrin A1 - Resch-Genger, Ute A1 - Nitschke, R. ED - O.S. Wolfbeis, ED - Resch-Genger, Ute T1 - Comparability of fluorescence microscopy data and need for instrument characterization of spectral scanning microscopes N2 - The aim of this article is to illustrate the need for an improved quality assurance in fluorescence microscopy. From the instrument-side, this can be achieved by a better understanding, consideration, and regular control of the instrument-specific parameters and quantities affecting measured fluorescence signals. Particularly, the need for requirements on physical- and chemical-type instrument standards for the characterization and performance validation of spectral fluorescence microscopes (SFMs) is discussed and suitable systems are presented. Special emphasis is given to spectral fluorescence standards and to day-to-day intensity standards for SFMs. Fluorescence standards and well-characterized fluorescence microscopes are the first and essential steps towards the comparability and the understanding of the variability in fluorescence microscopy data in medical and life sciences. In addition, standards enable the distinction between instrument-specific variations and fluorescent label- or probe-related uncertainties as well as generally sample-related effects. KW - Fluorescence spectroscopy KW - Fluorescence microscopy KW - Quality assurance KW - Calibration KW - Standard KW - Comparability KW - Quantification PY - 2008 SN - 978-3-540-70570-3 DO - https://doi.org/10.1007/4243_2008_028 SN - 1617-1306 N1 - Serientitel: Springer Series on Fluorescence – Series title: Springer Series on Fluorescence VL - 6 IS - Part A SP - 89 EP - 116 PB - Springer CY - Berlin, Heidelberg AN - OPUS4-18995 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - DeRose, P.C. A1 - Wang, L. A1 - Gaigalas, A.K. A1 - Kramer, G.W. A1 - Resch-Genger, Ute A1 - Panne, Ulrich ED - Resch-Genger, Ute ED - O.S. Wolfbeis, T1 - Need for and metrological approaches towards standardization of fluorescence measurements from the view of national metrology institutes N2 - The need for standardization in fluorescence measurements to improve quality assurance and to meet regulatory demands is addressed from the viewpoint of National Metrology Institutes (NMIs). Classes of fluorescence standards are defined, including instrument calibration standards for the determination and correction of instrument bias, application-specific standards based on commonly used fluorescent labels, and instrument validation standards for periodic checks of instrument performance. The need for each class of standard is addressed and on-going efforts by NMIs and others are described. Several certified reference materials (CRMs) that have recently been developed by NMIs are highlighted. These include spectral correction standards, developed independently by both NIST and BAM (Germany), and fluorescence intensity standards for flow cytometry, developed by NIST. In addition, future activities at both institutes are addressed such as the development of day-to-day intensity standards. KW - Fluorescence spectroscopy KW - Quality assurance KW - Calibration KW - Standard KW - Comparability KW - Quantification KW - Traceability KW - Radiometry KW - Emission standard KW - Fluorescent glass KW - Spectral correction KW - Spectral fluorescence standard PY - 2008 SN - 978-3-540-75206-6 DO - https://doi.org/10.1007/4243_2008_049 SN - 1617-1306 N1 - Serientitel: Springer Series on Fluorescence – Series title: Springer Series on Fluorescence VL - 5 IS - Part A SP - 33 EP - 62 PB - Springer AN - OPUS4-18996 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Resch-Genger, Ute A1 - Rurack, Knut ED - Lieberman, R. T1 - Steady-state and time-resolved fluorometry of fluorescent pollutants and heavy metal complexes N2 - Time-resolved laser-induced fluorescence spectroscopy is one of the most sensitive optical methods which is well suited for on-line in situ analysis. Here, three examples for the steady- state and time-resolved fluorescence analysis of environmentally important analytes, the fluorescent monoaromatic hydrocarbons benzene, toluene, and xylene as well as non fluorescent heavy metal ions forming a fluorescent complex with a cation coordinating fluorescence probe, are presented and the potential of both methods is discussed. For BTX, various mixtures of the spectrally similar compounds B, T, and X showing different fluorescence lifetimes were studied with both methods. As an example for fluorometric metal ion analysis, the fluorescence probe BP(OH)2 (2,2'-bipyridyl- 3,3'-diol) was employed for the determination of d10 metal ions in water and the newly developed fluorescence probe APTA for the detection of Cu(II). Cation complexation of BP(OH2 yields spectrally very similar complexes which differ in their fluorescence lifetimes. Complexation of APTA to Cu(II) leads to small spectral changes and a strong increase in fluorescence quantum yield and lifetime. For the analytes studied, a comparison of the detection limits, standard deviations, and linear dynamic range of both methods clearly demonstrates the analytical potential of time-resolved fluorometry. T2 - Conference CY - Munich, Germany DA - 1997-06-16 KW - Fluorescence KW - Time-resolved KW - Probe KW - Heavy metal ion KW - Cation complex PY - 1997 SN - 0-8194-2526-5 DO - https://doi.org/10.1117/12.276139 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 3105 SP - 96 EP - 103 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-2099 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hentschel, Manfred P. A1 - Harbich, Karl-Wolfram A1 - Lange, Axel A1 - Schors, Jörg A1 - Müller, Bernd R. T1 - Röntgen-Topographie mit Klein- und Weitwinkel-Streuung N2 - Röntgen-Topographische Verfahren sind dadurch gekennzeichnet, daß die Streueigenschaften eines Probekörpers ortskorreliert erfaßt werden. Somit vereinigen sie die Vorzüge der bildgebenden Eigenschaft der Radiographie mit der Strukturselektivität der Röntgenanalyse. Sowohl die Röntgen-Weitwinkel-Streuung als auch die Röntgen-Kleinwinkel-Streuung (-Beugung und -Refraktion) werden topographisch für die Materialcharakterisierung eingesetzt. Die Topographie-Verfahren und Untersuchungsbeispiele an nichtmetallischen Werkstoffen werden dargestellt. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Röntgen-Streuung KW - Materialcharakterisierung KW - Komposite KW - Keramik PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v15/v15.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-2027 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Harwardt, Marco A1 - Hentschel, Manfred P. A1 - Illerhaus, Bernhard A1 - Goebbels, Jürgen A1 - Bamberg, J. A1 - Heutling, F. ED - Danny Van Hemelrijck, ED - Igor Solodov, ED - Anastasopoulos, Athanasios ED - Gerhard Busse, T1 - Synchrotron-Refraction-Computed-Tomography for NDT and characterisation of lightweight composite materials T2 - 4th International Conference of Emerging Technologies in Non-Destructive Testing (ETNDT 4) CY - Stuttgart, Germany DA - 2007-04-02 KW - Refraction KW - Computed Tomography KW - NDE KW - Ti-MMC PY - 2008 SN - 978-0-415-46476-5 SP - 217 EP - 221 PB - Taylor & Francis CY - London, UK AN - OPUS4-18680 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Harwardt, Michael A1 - Hentschel, Manfred P. A1 - Illerhaus, Bernhard A1 - Goebbels, Jürgen A1 - Bamberg, J. A1 - Heutling, F. T1 - Micro Crack Characterization of Metal Matrix Composites by 3D-Refraction-Computed-Tomography T2 - 16th World Conference on Nondestructive Testing CY - Montreal, Canada DA - 2004-08-30 KW - NDE KW - X-ray refraction KW - Composites KW - MMC PY - 2004 SP - 9 pages PB - International Committee for Non-Destructive Testing CY - Montreal AN - OPUS4-5486 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Harwardt, Michael A1 - Hentschel, Manfred P. T1 - Submikro-Computer-Tomographie an der BAMline T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 KW - Computer Tomographie KW - Vergrößerung mit asymmetrischen Kristallen PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/v09/v09.htm SN - 3-931381-55-2 SP - 1(?) EP - 7(?) PB - DGZfP CY - Berlin AN - OPUS4-5869 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Goebbels, Jürgen A1 - Müller, Bernd R. A1 - Riesemeier, Heinrich A1 - Weidemann, Gerd ED - Mazal, P. T1 - Special Solutions for CT-Investigations with Synchrotron Radiation T2 - 2nd International Workshop of NDT Experts CY - Prague, Czech Republic DA - 2003-10-06 KW - Computed Tomography KW - Synchrotron radiation KW - X-ray refraction KW - Metal matrix composites KW - Porosity PY - 2003 SN - 80-2142475-3 SP - 91 EP - 97 PB - Univ. of Technology CY - Brno AN - OPUS4-2876 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Harwardt, Michael A1 - Hentschel, Manfred P. A1 - Illerhaus, Bernhard A1 - Goebbels, Jürgen T1 - First refraction enhanced 3D computed tomography T2 - International Symposium on Computed Tomography and Image Processing for Industrial Radiology CY - Berlin, Germany DA - 2003-06-23 PY - 2003 SN - 3-931381-48-X N1 - Serientitel: DGZfP-Proceedings BB – Series title: DGZfP-Proceedings BB IS - 84-CD PB - DGZfP CY - Berlin AN - OPUS4-2519 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph T1 - Potential of dynamic-mechanical analysis toward a complementary material and system testing approach for structural glazing N2 - Dynamic-mechanical material analysis as a basis for a general performance exploration complemented by system testing under superimposed climatic and mechanical loading seems to be a promising interdependent test approach addressing the performance behavior of construction sealants under more realistic conditions. With this contribution an attempt is made to adapt dynamic-mechanical material analysis, which has been already successfully validated for different construction types of expansion joint systems in road and bridge engineering, to the field of construction sealants for building façades. Test results from dynamic-mechanical material analysis characterizing the temperature-dependent, deformation-dependent, and frequency-dependent behavior of structural sealant materials are presented and exemplarily discussed for three different sealant products. An attempt is made to address unknown material characteristics in the multi-dimensional loading matrix representing practical use conditions. Furthermore, the applicability of this test approach and its various complex test modes for the exploration of technological performance and especially estimation of fatigue behavior is verified in several examples. Based on this fundamental material exploration, it is planned to complement the dynamic-mechanical assessment methodology by means of system tests on a section of a structural glazing system subjected to a simplified but superimposed loading function. The technical fundamentals and the procedure proposed to develop an adequate system test mode are introduced. The motivation for these investigations is to identify the actual mechanical system behavior under load combinations and for specimens that both closer resemble reality. The objective is to achieve a consistent and interdependent test program complementary to the existing methodology. Finally, the study is meant to initiate further progress toward a performance-related methodology which considers the design, specification, material, and system selection. KW - Sealants KW - Structural glazing KW - Performance assessment KW - Material characterization KW - Dynamic-mechanical testing KW - System test method KW - Superimposed loading KW - Mechanical characteristics KW - Capability evaluation KW - Durability evaluation PY - 2012 SN - 978-0-8031-7557-0 DO - https://doi.org/10.1520/STP1545-EB N1 - Serientitel: Journal of ASTM International – Series title: Journal of ASTM International VL - 4 IS - STP1545 SP - 404 EP - 431 CY - West Conshokocken, PA, USA AN - OPUS4-27317 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph T1 - Teilprojekt 'Strukturanalyse von offenporigen Asphalten' N2 - Neben den Stoffeigenschaften der einzelnen Ausgangsmaterialien (Mischungsbestandteilen) bestimmt vor allem die Struktur eines daraus zusammengesetzten Materialverbundes (Komposit-Material) dessen Gebrauchsverhalten. Diese einfache Weisheit ist Motivation für die ständige Weiterentwicklung des Untersuchungsinstrumentariums zur Gefügekennzeichnung auch im Bereich der Baustoffe. Nachdem die Gefügeaufklärung insbesondere bei mineralischen Baustoffen bereits integrierter Bestandteil der Baustoffcharakterisierung ist, erfordern auch die zunehmende Spezialisierung und Weiterentwicklung der Asphaltbaustoffe im Zusammenhang mit der Forderung nach gebrauchsgerechtem Leistungsnachweis methodische Fortentwicklung bei der Strukturkennzeichnung. KW - Asphalt KW - Geräuschminderung KW - Strukturaufklärung KW - Hohlraumanalyse PY - 2012 SN - 978-3-86918-183-7 SN - 0943-9323 N1 - Serientitel: Berichte der Bundesanstalt für Straßenwesen – Series title: Berichte der Bundesanstalt für Straßenwesen IS - S 74 SP - 167 EP - 188 PB - Wirtschaftsverl. NW, Verl. für neue Wissenschaft CY - Bergisch Gladbach AN - OPUS4-25554 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Biyikal, Mustafa A1 - Hecht, Mandy A1 - Martínez-Mánez, Ramon A1 - Rurack, Knut A1 - Sancenón, F. ED - Gale, P.A. ED - Steed, J.W. T1 - Supramolecular hybrid nanomaterials as prospective sensing platforms N2 - Supramolecular interactions are vital processes in many chemical sensors, biochemical assays, and other analytical detection schemes. On the background of the current, rapidly developing, and constantly changing requirements for (bio)analytical techniques, the classical molecular host is increasingly overburdened to accomplish a specific analytical task with the desired selectivity and sensitivity. Instead, other signaling strategies have to be conceived that overcome the limits in signal output, dynamic range, or compound targeting, which are imminent to various traditional methods. A very promising approach is the combination of concepts of supramolecular chemistry with nanostructured or nanoscopic inorganic materials, that is, the development of hybrid sensor materials. Such hybrids often lead to improved functionality and enhanced performance, and the present chapter discusses the contributory features in relation to the major aspects, which are related to the enhanced coordination by the preorganization of binding sites, signal amplification by the preorganization on surfaces, aggregation‐mediated signaling, surface‐modification‐based signaling, the tuning of selectivity through polarity and size, and gated signaling. KW - Supramolekulare Chemie KW - Optische Sonden KW - Nanotechnologie KW - Hybridmaterialien KW - Fluorescence KW - Hybrid nanomaterials KW - Optical sensors KW - Redox sensors KW - Supramolecular chemistry PY - 2012 SN - 978-0-470-74640-0 DO - https://doi.org/10.1002/9780470661345.smc199 SP - 3669 EP - 3698 PB - John Wiley & Sons AN - OPUS4-26118 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Richter, Silke T1 - Plasma spectrochemistry in material sciences - Theory and recent applications N2 - This paper provides an overview about state of the art methods in the field of plasma spectrometry and its application in material science. Different types of plasmas with their special characteristics for various applications are described. Indirect analytical methods involving sample digestion and often also analyte/matrix separation prior to analyzing the samples still represent the most important routine methods. Here, plasma optical emission and mass spectrometry are the most frequently used determination techniques with a wide variety of instruments commercially available. To avoid the risk of analyte loss or of contaminations during an often time consuming and laborious sample preparation, the use of techniques with direct solid sampling is considered an attractive alternative for the analysis of many materials. A survey on applications with a special focus on direct solid sampling techniques such as GDMS, GD-OES, LA-ICPMS, ETV-ICPMS, ETV-ICP-OES, DC-Arc is given. Different possible calibration strategies are discussed. KW - Plasma spectrochemistry KW - Spectrometry KW - Material science KW - Solid sampling techniques PY - 2013 SN - 978-0-4700-2731-8 DO - https://doi.org/10.1002/9780470027318.a9341 SP - 1 EP - 19 PB - John Wiley & Sons AN - OPUS4-30303 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Harwardt, Michael A1 - Hentschel, Manfred P. A1 - Illerhaus, Bernhard A1 - Goebbels, Jürgen A1 - Bamberg, J. A1 - Heutling, F. T1 - 3D Refraction Computed Tomography Applied to Metal Matrix Composites N2 - For the first time Metal Matrix Composites (MMC) have been investigated by 3D Computed Tomography combined with enhanced interface contrast due to X-ray refraction. X-ray refraction is a relatively new approach for the characterization of advanced materials. The related techniques of Refraction Topography and Refraction Computed Tomography have been developed and applied at our laboratory during the last decade to meet the actual demand for improved nondestructive characterization of high performance composites, ceramics and other low density materials and components. X-ray refraction occurs, when X-rays crosses interfaces of spherical or cylindrical shape (e.g. pores or fibres) in the same way as visible light is refracted by lenses. These X-ray optical effects can be observed at small scattering angles of few minutes of arc as the refractive index n of X-rays is nearly unity (n = 1 – 10-6). Due to the short X-ray wavelength of about 0.1 nm the technique determines the amount of inner surfaces and interfaces of nanometer dimensions. The technique is expected to solve many problems in understanding the meaning of micro and sub micro structures in materials science. With the results of the CT investigation, some questions could be clarified for a better understanding of fatigue failure mechanisms under cyclic loading conditions. The specimens for the test programme have been provided by MTU Aero Engines. They consist of a titanium matrix (Ti6242) reinforced by SiC fibres (SCS6). The investigations have been performed at the materials research station of BAM (BAMline) at the Synchrotron Facility BESSY in Berlin, Germany. T2 - 35th International SAMPE technical conference CY - Dayton, OH, USA DA - 2003-09-28 KW - Non-Destructive Inspection (NDI) KW - Characterization KW - Titanium Metal Matrix Composites (Ti-MMC) KW - Ti6242 KW - SCS6 PY - 2003 SN - 0-938994-95-6 PB - SAMPE CY - Covina, Calif. AN - OPUS4-2780 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kupsch, Andreas A1 - Beckmann, Jörg A1 - Ewert, Uwe A1 - Lange, Axel A1 - Hentschel, Manfred P. ED - Beyerer, J. T1 - Threat detection and characterisation by spectroscopic THz-imaging T2 - 2nd Security Research Conference "Future Security" CY - Karlsruhe, Germany DA - 2007-09-12 KW - Terahertz-Radiography KW - Explosives PY - 2007 SN - 978-3-86644-147-7 SP - 155 EP - 158 PB - Universitätsverl. CY - Karlsruhe AN - OPUS4-16101 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Harwardt, Michael A1 - Hentschel, Manfred P. ED - Paul Sellin, T1 - Refraction enhanced micro-CT for non-destructive materials characterization T2 - IEEE Nuclear Science Symposium CY - Dresden, Germany DA - 2008-10-19 KW - Synchrotron KW - Micro-CT KW - Refraction PY - 2008 SN - 978-1-4244-2715-4 SN - 1082-2654 SP - 541 EP - 546 AN - OPUS4-18662 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Harwardt, Michael A1 - Hentschel, Manfred P. T1 - Synchrotron Based Micro-CT and Refraction Enhanced Micro-CT of MMC T2 - International Symposium on NDT in Aerospace CY - Fürth, Germany DA - 2008-12-03 KW - X-ray Refraction KW - Synchrotron Radiation KW - Computed Tomography KW - Metal Matrix Composites KW - Lightweight Materials KW - Aerospace PY - 2008 SN - 978-3-940283-12-2 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - DGZfP-BB 114 (Poster 10) SP - 295 EP - 305 PB - DGZfP CY - Berlin AN - OPUS4-18607 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hentschel, Manfred P. A1 - Müller, Bernd R. ED - Czichos, Horst ED - Tetsuya Saito, ED - Leslie Smith, T1 - Computed tomography - Application to composites and microstructures KW - Microstructures KW - Computed tomography KW - X-ray refraction tomography KW - Composites PY - 2006 SN - 978-3-540-20785-6 SP - 870 EP - 875 PB - Springer CY - Berlin AN - OPUS4-14066 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Hentschel, Manfred P. ED - Cohen, L. J. T1 - Non-Destructive Characterization of High Performance Composites by use of X-Ray Refraction Topography T2 - 48th International SAMPE symposium and exhibition CY - Long Beach, CA, USA DA - 2003-05-11 KW - Non-Destructive Inspection (NDI) KW - Characterization KW - Advanced Composite PY - 2003 SN - 0-938994-94-8 VL - 1 SP - 1203 EP - 1211 PB - SAMPE International Business Office CY - Covina, Calif. AN - OPUS4-2542 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rübner, Katrin A1 - Schnell, Alexander A1 - Müller, Anette T1 - Comparative study of lightweight expanded aggregates made from masonry rubble or clay N2 - Lightweight aggregates can be manufactured from masonry rubble by a thermal expanding process pursuing the idea of feedstock recycling. Throughout a series of research projects, the manufacturing process has been developed, optimized and scaled up. Various test results prove that the engineering properties of the new expanded masonry rubble aggregates are similar to those of traditional expanded clays. The aggregates show a heterogeneous and macroporous pore structure. The grains consist of cracks, cavities, large bulky pores and a solid skeleton containing small capillary pores as well as partly melted areas. But which differences and similarities exist to expanded clay aggregates, which are made from a relatively homogeneous clayey raw material? To answer this question, comparative studies on the chemical, physical, mineralogical and microstructural characteristics of expanded masonry rubble aggregates and commercial expanded clay aggregates have been conducted. In our contribution, results of particle shape and porosity measurements, mercury intrusion porosimetry and electron microscopy are presented. The microstructural characteristics are correlated with engineering properties, such as water absorption and particle strength. KW - Lightweight aggregates KW - Expanded aggregates KW - Expanded granules KW - Expanded clay KW - Masonry rubble KW - Chemical recycling PY - 2023 SN - 978-2-35158-238-1 VL - 137 SP - 93 EP - 121 PB - RILEM Publications S.A.R.L. CY - Champs-sur-Marne, France AN - OPUS4-64752 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ewers, Benjamin A1 - Kupsch, Andreas T1 - Spectral terahertz topography N2 - THz-time domain spectroscopy (TDS) is utilised for spectrally resolved topography. Beyond pure imaging we employ a reflection set-up in order to demonstrate capabilities of computing 3D volume data for components of everyday commmunication electronics. The technique´s potentials in non-destructive testing (NDT) are explored with respect to established methods. T2 - IRMMW-THz 2009 - 34th International conference on infrared, millimeter, and terahertz waves CY - Busan, Korea DA - 2009-09-21 KW - THz KW - TDS KW - Tomography KW - Spatial resolution KW - TOF PY - 2009 SN - 978-1-4244-2120-6 SP - 1 EP - 2(?) AN - OPUS4-20549 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schors, Jörg A1 - Hentschel, Manfred P. A1 - Kupsch, Andreas T1 - Materialcharakterisierung durch tiefenaufgelöste Röntgen-Diffraktometrie T2 - DGZfP Jahrestagung CY - Rostock, Deutschland DA - 2005-05-02 KW - Röntgen-Diffraktions-Mikroskopie KW - Materialcharakterisierung und -identifizierung PY - 2005 SN - 3-931381-64-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 94-CD SP - 1(?) EP - 3(?) PB - DGZfP CY - Berlin AN - OPUS4-11696 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ewers, Benjamin A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Müller, Bernd R. A1 - Hoehl, a. A1 - Müller, R. A1 - Ulm, G. T1 - Terahertz spectral computed tomography N2 - The novel technique of spectral THz computed tomography is demonstrated at an example of a small plastic figure. The data are reconstructed by conventional filtered back-projection. The reconstruction are discussed. T2 - IRMMW-THz 2009 - 34th International conference on infrared, millimeter, and terahertz waves CY - Busan, Korea DA - 2009-09-21 KW - THz KW - Computed tomography PY - 2009 SN - 978-1-4244-2120-6 SP - 1 EP - 2(?) AN - OPUS4-20546 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Bernd R. A1 - Ekenhorst, Derk A1 - Brzezinka, Klaus-Werner A1 - Hentschel, Manfred P. ED - Krenkel, W. T1 - Fiber Induced Failure of Carbon/Carbon Composites T2 - 4th International Conference on High Temperature Ceramic Matrix Composites ; 4th HT-CMC Conference CY - Munich, Germany DA - 2001-10-01 PY - 2001 SN - 3-527-30320-0 VL - 4 SP - 175 EP - 180 PB - Wiley-VCH CY - Weinheim AN - OPUS4-1289 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Hentschel, Manfred P. ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - Synchrotron Radiation Refraction Topography PY - 2003 SN - 3-540-40154-7 SP - 167 EP - 176 PB - Springer CY - Berlin AN - OPUS4-2765 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Bernd R. A1 - Hentschel, Manfred P. A1 - Lange, Axel T1 - SYRTOPO - Materialcharakterisierung an der BAMline N2 - Einleitung Die Bundesanstalt für Materialforschung und -prüfung (BAM) hat im Synchrotronstrahlungslabor BESSY (im Wissenschafts- und Technologiezentrum Berlin-Adlershof) ein Röntgen-Strahlrohr (BAMline) sowie einen Messplatz für die zerstörungsfreie Materialcharakterisierung aufgebaut. Der Messplatz erlaubt die Untersuchung mit monochromatischer Röntgenstrahlung im Energiebereich von 5keV bis 60keV mit hohem Photonenfluß. Seit Anfang 2001 läuft der Probebetrieb zur Optimierung der Strahlungsquelle sowie des experimentellen Aufbaus. Die Besonderheiten der BAMline im Vergleich zu Laboröntgenquellen sind der hohe Photonenfluss bei freier Wahl der Photonenenergie sowie die Polarisationseigenschaften und die außerordentliche Parallelität der Strahlung bei großem Strahlungsquerschnitt. Dies ermöglicht Refraktionstopogramme für Metall-Matrix-Komposite (MMC) in relativ kurzer Zeit, mit einer lateralen Ortsauflösung von 10µm, zu messen. Das neuartige ZfP-Verfahren der Röntgen-Refraktions-Topograhy wurde an anderer Stelle ausführlich beschrieben [1,2]. Es nutzt die Messtechnik der traditionellen Kleinwinkelstreuung auf unkonventionelle Weise, und wurde in den letzten zehn Jahren in unserem Labor entwickelte und an die fortgeschrittenen Anforderungen für die zerstörungsfreie Charakterisierung von neuartigen Werkstoffen wie faserverstärkten Kompositen und Keramiken angepasst. Das Verfahren basiert auf dem Brechungseffekt von Röntgenstrahlen. Auf Grund der kurzen Wellenlänge der Röntgenstrahlen (l » 0.1nm) können innere Oberflächen sowie Grenzflächenkonzentrationen von Nanometer Große detektiert werden, so dass mit Hilfe dieser Technik sehr leicht Partikel, Risse und Porengrößen im Sub-Mikrometer-Bereich gemessen werden können, ohne dabei die Proben zu zerstören, wie es bei mikroskopischen Techniken notwendig ist. Anwendungsfelder dieser Untersuchungsmethode sind z.B. die Erkennung von Faser-Matrix-Enthaftung nach Schlageinwirkung sowie Rissbildung durch Alterung und Herstellung bei faserverstärkten Kompositen. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v16/v16.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD SP - 1(?) EP - 6(?) PB - DGZfP CY - Berlin AN - OPUS4-2793 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ewert, Uwe A1 - Osterloh, Kurt A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Beckmann, Jörg A1 - Hentschel, Manfred P. ED - Beyerer, J. T1 - Advanced radiological technologies for imaging and characterisation of threats T2 - 2nd Security Research Conference "Future Security" CY - Karlsruhe, Germany DA - 2007-09-12 KW - Threat Detection KW - Dual Energy KW - Multiple View Inspection KW - Terahertz Imaging KW - Explosives PY - 2007 SN - 978-3-86644-147-7 SP - 116 EP - 119 PB - Universitätsverl. CY - Karlsruhe AN - OPUS4-18348 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hentschel, Manfred P. A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Wald, Oliver T1 - Quantitative X-ray Determination of CFRP Micro Structures T2 - International Symposium on NDT in Aerospace CY - Fürth, Germany DA - 2008-12-03 KW - Neutronen-Radiographie KW - Neutronen-Tomographie KW - Tomographische Rekonstruktionsalgorithmen KW - Brennstoffzellen KW - In-Situ Radiologie PY - 2008 SN - 978-3-940283-12-2 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - DGZfP-BB 114 (X-Ray/Lecture 13) SP - 89 EP - 98 PB - DGZfP CY - Berlin AN - OPUS4-18606 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hentschel, Manfred P. A1 - Lange, Axel A1 - Müller, Bernd R. A1 - Schors, Jörg A1 - Harbich, Karl-Wolfram T1 - Röntgen-Refraktions-Computer-Tomographie N2 - Für die Charakterisierung Neuer Werkstoffe, vornehmlich Nichtmetalle, hat sich das Verfahren der Röntgen-Refraktions-Topographie bewährt. Es handelt sich phänomenologisch um eine Technik der Röntgen-Kleinwinkel-Streuung mit Probekörper-Abtastung bei fest vorgewähltem Streuwinkel. Gegenüber der klassischen Beugungstheorie dominieren jedoch bei der Streuung an Strukturen oberhalb von 0.3 µm Größe röntgenoptische Brechungseffekte. Detektierbar sind damit innere Ober- und Grenzflächen, insbesondere Mikrorisse unterhalb der lichtmikroskopischen Erkennbarkeit. Da es sich hierbei um eine Durchstrahlungs-Technik handelt, überlagern jedoch die Strukturen zu einer Projektion, analog zu den radiographischen Verfahren. Um auch Informationen entlang der Durchstrahlungs-Richtung in der Tiefe des Probekörpers zu erhalten, wird unter kleinen Streuwinkeln die Computer-Tomographie durchgeführt, im ersten Ansatz mit nur zwei Meßkanälen, jeweils für die Messung der Absorptions- und der Refraktions-Intensität. Dazu werden nacheinander 360 Linear-Scans nach Drehung von jeweils 1° aufgenommen. Die Intensitätswerte werden nach den Regeln der fouriergefilterten Rückprojektion zu Computer-Tomogrammen verarbeitet. Die Ergebnisse visualisieren die Anordnung von Grenzflächen und innere Oberflächen, die sich für zahlreiche nichtmetallische Werkstoffe, vor alllem im Transportmittel-Leichtbau als relevante Mikrostrukturen für das Versagens-Verhalten und die Werkstoff-Optimierung eignen. Zum Vergleich entstehen aus den simultanen Absorptionsmessungen gleichzeitig die klassischen Computer-Tomogramme, die ausschließlich Dichteänderungen anzeigen. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 1999 CY - Celle, Deutschland DA - 1999-05-10 KW - Röntgentomographie KW - Röntgen-Refraktions-Computer-Tomographie PY - 1999 UR - http://www.ndt.net/abstract/dgzfp99/data/40.htm SN - 3-931381-27-7 VL - 1 IS - 68 SP - 361 EP - 369 PB - DGZfP CY - Berlin AN - OPUS4-715 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hentschel, Manfred P. A1 - Müller, Bernd R. A1 - Harwardt, Michael A1 - Lange, Axel T1 - Synchrotron-Refraktions-Computer Tomographie für die Materialforschung T2 - DGZfP Jahrestagung CY - Rostock, Deutschland DA - 2005-05-02 KW - Computer-Tomographie KW - Synchrotronstrahlung KW - Refraktionskontrast KW - Bragg-Vergrößerung PY - 2005 SN - 3-931381-64-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 94-CD SP - 1(?) EP - 7(?) PB - DGZfP CY - Berlin AN - OPUS4-11698 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Bernd R. A1 - Trappe, Volker A1 - Goebbels, Jürgen A1 - Hickmann, Stefan A1 - Grasse, Fabian T1 - Non-destructive characterization of composites: from small scale to complex component testing - a challenge T2 - International Symposium on NDT in Aerospace CY - Hamburg, Germany DA - 2010-11-22 KW - Aircraft KW - Wind turbine blades KW - Automotive KW - X-ray refraction KW - Fibre orientation KW - WAXS technique KW - X-ray computed tomography PY - 2010 SN - 978-3-940283-28-3 IS - DGZfP-BB 124 (Tu.2.B.1) SP - 1 EP - 6 AN - OPUS4-22724 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. T1 - Computertomographische 2D-Rekonstruktionen ohne gefilterte Rückprojektion mit DIRECTT T2 - DACH-Jahrestagung 2008 CY - St. Gallen, Schweiz DA - 2008-04-28 KW - Computer-Tomographie KW - Rekonstruktionsalgorithmen KW - Ortsauflösung PY - 2008 SN - 978-3-940283-09-2 IS - DGZfP-BB 113 (Poster 10) SP - 1 EP - 6 AN - OPUS4-17937 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hentschel, Manfred P. A1 - Harbich, Karl-Wolfram A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Schors, Jörg A1 - Wald, Oliver ED - Gerhard Busse, ED - Danny Van Hemelrijck, ED - Igor Solodov, ED - Anastasopoulos, Athanasios T1 - NDE of micro structured materials by X-ray diffraction and refraction topography T2 - 4th International Conference of Emerging Technologies in Non-Destructive Testing (ETNDT 4) CY - Stuttgart, Germany DA - 2007-04-02 KW - Nondestructive testing KW - X-ray scattering KW - X-ray topography KW - Computed topography KW - Synchrotron refraction computed tomography KW - Structure property relations KW - Composite damaging KW - Ceramics KW - Foams PY - 2007 SN - 978-0-415-46476-5 SP - 15 EP - 22 PB - Taylor & Francis CY - London, UK AN - OPUS4-17561 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hoffmann, Katrin A1 - Mix, Renate A1 - Friedrich, Jörg Florian A1 - Resch-Genger, Ute ED - Geddes, C.D. T1 - Spectroscopic characterization of plasma - Chemically functionalized and fluorophore-labeled polymer surfaces N2 - The potential of spectrofluorometry and fluorescence microscopy for the characterization and quantification of different functionalities like OH and NH2 groups at plasma-chemically modified polymer surfaces is assessed using traditional reactive dyes such as dansyl derivatives and a sophisticated VIS-excitable chromogenic and fluorogenic pyrylium label showing binding-induced spectral and intensity changes in absorption and emission. Aiming at an improved fluorometric surface analysis, based upon these measurements, several sources of uncertainty inherent to fluorescence measurements are illustrated ranging from environment-dependent dye absorption and emission features over spectral correction and nonspecific adsorption to the critical influence of label choice on the measured background. Solutions to these drawbacks are given thereby underlining the potential of fluorometry for surface analysis. KW - Polymer functionalization KW - Plasma modification KW - Fluorescence spectroscopy KW - Surface labeling PY - 2010 SN - 978-1-4419-0828-5 DO - https://doi.org/10.1007/978-1-4419-1260-2_6 N1 - Serientitel: Reviews in Fluorescence – Series title: Reviews in Fluorescence VL - 5 SP - 139 EP - 160 PB - Springer Science + Business Media AN - OPUS4-21274 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Resch-Genger, Ute A1 - Hennrich, Gunther T1 - Fluorescent redox-switchable devices PY - 2005 SN - 978-0-387-23334-5 DO - https://doi.org/10.1007/0-387-23335-0_5 VL - 9 SP - 189 EP - 218 PB - Springer AN - OPUS4-5342 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Traub, Heike A1 - Win, Tin A1 - Lück, Detlef A1 - Koch, Matthias A1 - Becker, Roland T1 - Evaluation and Development of Methods for the Analysis of Soils according to § 8 of the German Federal Soil Protection Act T2 - 7th International FZK/TNO Conference on Contaminated Soil ; 7th ConSoil 2000 CY - Leipzig, Germany DA - 2000-09-18 KW - Soil KW - Heavy metals KW - Cyanide KW - Chromium KW - Organic contaminants KW - Analytical methods KW - Standardization KW - National law PY - 2000 SN - 0-7277-2954-3 VL - 2 SP - 904 EP - 905 PB - Telford CY - London AN - OPUS4-876 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Resch-Genger, Ute A1 - Pfeifer, Dietmar A1 - Hoffmann, Katrin A1 - Flachenecker, Günter A1 - Hoffmann, Angelika A1 - Monte, C. ED - Resch-Genger, Ute ED - O.S. Wolfbeis, T1 - Linking fluorometry to radiometry with physical and chemical transfer standards: instrument characterization and traceable fluorescence measurements N2 - Problems associated with the measurement of photoluminescence are briefly reviewed, including relevant instrument parameters affecting these measurements. Procedures for the characterization of relevant instruments are discussed, focusing on spectrofluorometers, and fit-for-purpose methods including suitable standards are recommended. The aim here is to increase the awareness of the importance of reliable instrument characterization and to improve the comparability of measurements of photoluminescence. KW - Calibration KW - Emission standards KW - Fluorescence intensity standards KW - Fluorescence standards KW - Quality assurance KW - Spectral correction PY - 2008 SN - 978-3-540-75206-6 DO - https://doi.org/10.1007/4243_2008_054 SN - 1617-1306 N1 - Serientitel: Springer Series on Fluorescence – Series title: Springer Series on Fluorescence VL - 5 IS - Part II SP - 65 EP - 99 PB - Springer AN - OPUS4-18301 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mix, Renate A1 - Hoffmann, Katrin A1 - Resch-Genger, Ute A1 - Decker, Renate A1 - Friedrich, Jörg Florian ED - Mittal, K. T1 - Covalent coupling of fluorophores to polymer surface-bonded functional groups KW - Plasma modification KW - Fluorescence KW - Surface functionalization KW - Reactions at polymer surfaces KW - Spectroscopy KW - Quantification PY - 2007 SN - 978-90-6764-453-2 VL - 4 SP - 171 EP - 191 PB - VSP CY - Utrecht AN - OPUS4-14867 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rurack, Knut A1 - Bricks, J. L. A1 - Slominskii, J. L. A1 - Resch-Genger, Ute ED - Dähne, S. T1 - Long wavelength emitting fluorescence probes for metal ions T2 - NATO Advanced Research Workshop on Syntheses, Optical Properties and Applications of Near-Infrared (NIR) Dyes in High Technology Fields CY - Trest', Czech Republic DA - 1997-09-24 PY - 1998 IS - 52 SP - 191 EP - 200 PB - Kluwer CY - Dordrecht AN - OPUS4-2097 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hoffmann, Katrin A1 - Resch-Genger, Ute A1 - Marlow, F. ED - Laeri, F. T1 - Photosensitive Optical Properties of Zeolitic Nanocomposites PY - 2003 SN - 3-527-30501-7 SP - 501 EP - 520 PB - Wiley-VCH CY - Weinheim AN - OPUS4-2714 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rurack, Knut ED - Resch-Genger, Ute ED - O.S. Wolfbeis, T1 - Fluorescence Quantum Yields:Methods of Determination and Standards N2 - The fluorescence quantum yield Φ f is a key property that characterizes the ability of a fluorophore to convert absorbed photons into emitted photons under various environmental conditions. Knowledge of it is important for the successful development of fluorometric indication and visualization methods and for the understanding of light-driven processes in the natural sciences. Φ f is a molecule- or material-related parameter and can thus significantly differ from the fraction of absorbed photons that are actually measured as the fluorescence signal of a certain sample, e.g., when the signal is modulated by reabsorption, self-quenching or polarization effects. The determination of Φ f can be performed in absolute measurements or relative to a fluorescent standard material with a known Φ f by optical or calorimetric methods. Here the different procedures and techniques are described and compared, and the suitability of a representative number of dyes that have been proposed as fluorescence reference materials in the past 25 years is discussed. Besides addressing specific issues such as low-temperature measurements and the appropriate choice of standards and measurement conditions, we conclude with recommendations for better standardization and quality management in this area. PY - 2008 SN - 978-3-540-75206-6 DO - https://doi.org/10.1007/4243_2008_019 SN - 1617-1306 N1 - Serientitel: Springer Series on Fluorescence – Series title: Springer Series on Fluorescence VL - 5 IS - Part B SP - 101 EP - 145 PB - Springer AN - OPUS4-18445 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brookes, Stephen-Peter A1 - Kühn, Hans-Joachim A1 - Skrotzki, Birgit A1 - Klingelhöffer, Hellmuth A1 - Sievert, Rainer ED - Pohl, M. T1 - Axial-torsionale thermo-mechanische Ermüdung einer near-Gamma TiAl-Legierung T2 - Tagung "Werkstoffprüfung 2007" CY - Neu-Ulm, Deutschland DA - 2007-11-29 KW - Titanaluminide KW - Thermomechanische Ermüdung (TMF) KW - Mehrachsige Belastung KW - Axial-torsional Belastung KW - von Mises Vergleichsspannung KW - Spröd-Duktil-Übergangstemperatur PY - 2007 SN - 978-3-514-00753-6 SP - 249 EP - 254 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-16318 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst A1 - Skrotzki, Birgit A1 - Simon, Franz-Georg ED - Czichos, Horst ED - Hennecke, Manfred T1 - Werkstoffe PY - 2008 SN - 978-3-540-71851-2 SP - D1 EP - D31 PB - Springer CY - Berlin ET - 33. aktualisierte Auflage AN - OPUS4-16180 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Koch, Bernd A1 - Skrotzki, Birgit A1 - Schauerte, O. ED - K. Maruyama, ED - M. Niinomi, ED - S. Akiyama, ED - M. Ikeda, ED - M. Hagiwara, T1 - Low-cycle fatigue behaviour of metastable beta-titanium alloy TIMETAL LCB - mechanical and microstructural aspects T2 - 11th World Conference on Titianium (JIMIC 5) CY - Kyoto, Japan DA - 2007-06-03 KW - Beta titanium KW - Low-cost-beta (LCB) KW - Low-cycle-fatigue (LCF) KW - Strain controlled testing KW - Transmission electron microscopy (TEM) PY - 2007 SN - 978-4-88903-406-6 VL - 1 SP - 515 EP - 518 PB - Japan Institute of Metals CY - Kyoto AN - OPUS4-16668 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Coniglio, Nicolas A1 - Cross, Carl Edward ED - Jürgen Hirsch, ED - Skrotzki, Birgit ED - Günter Gottstein, T1 - Effect of Cooling Rate and Silicon Content on Solidification Path and Phase Constituents in 6060 Aluminium Castings and Weld Metal T2 - 11th International Conference on Aluminium Alloys (ICAA 11) CY - Aachen, Germany DA - 2008-09-22 KW - Weld Metal Microstructure KW - Cast Microstructure KW - Al-Mg-Si Alloy System KW - 6060 Aluminium Alloy KW - 4043 Filler Alloy KW - Silicon Content KW - Cooling Rate KW - Phase Constituents KW - Solidification Path PY - 2008 SN - 978-3-527-32367-8 VL - 2 SP - 1889 EP - 1893 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-18309 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brookes, Stephen-Peter A1 - Kühn, Hans-Joachim A1 - Skrotzki, Birgit A1 - Klingelhöffer, Hellmuth A1 - Sievert, Rainer A1 - Pfetzing, J. A1 - Peter, D. A1 - Eggeler, G. ED - Kim, Young-Won ED - David Morris, ED - Rui Yang, ED - Christoph Leyens, T1 - Axial-torsional thermo-mechanical fatigue of Ti-45 Al-5Nb-0.2B-0.2C T2 - TMS 2008 Annual Meeting & Exhibition, "Structural Aluminides for Elevated Temperatures - Gamma Titanium and Other Metallic Aluminides" CY - New Orleans, Louisiana, USA DA - 2008-03-09 KW - Titanium Aluminide KW - Thermo-mechanical Fatigue KW - Axial-torsional Loading PY - 2008 SN - 978-0-87339-7209 SP - 103 EP - 109 PB - TMS CY - Warrendale, Pa AN - OPUS4-17904 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Durlo Tambara, Luís Urbano A1 - Dehn, F. A1 - Gluth, Gregor ED - D’Erme, C. ED - Paglia, C. ED - Cordero, E. G. T1 - The importance of leaching for the carbonation resistance of alkali-activated slag and calcined clay concretes N2 - This study investigates the impact of leaching on the carbonation resistance of alkali-activated materials with varying calcium content. Six binder compositions were tested, combining ground blast furnace slag and calcined clay, with CaO content ranging from ~0% to ~40%. Samples underwent three conditions: no leaching, two weeks of leaching (2Le), and five leaching-carbonation cycles (5LCC). Carbonation tests were performed under natural conditions and 1% CO2 for reference and 2Le samples, while 5LCC samples were exposed solely to accelerated carbonation. Under natural carbonation, the typical relationship between carbonation resistance and the water/(CaO+MgOeq+Na2Oeq+K2Oeq) ratio was observed for both the reference and 2Le samples, with an increase in carbonation rate in compositions containing more than 40% calcined clay. In accelerated carbonation conditions, 2Le and 5LCC conditions showed slightly improved carbonation resistance compared to the reference samples, except for the mixtures containing only calcined clay (C100) and the mix with 40% calcined clay (C40S60). The poor performance of C100 was attributed to its low reactivity after 28 days, which resulted in significant sodium leaching and reduced activation of the calcined clay. Although C40S60 outperformed non-leached samples, its carbonation resistance slightly decreased in leached and accelerated carbonation samples due to reduced gel phase formation; however, this reduction was significantly less than that of C100. These findings suggest that while leaching can enhance carbonation resistance by reducing excess alkalis, low-reactivity systems, e.g. based solely on calcined clay, are more susceptible to degradation. KW - Carbonation KW - Alkali-activated materials KW - Leaching KW - Durability KW - Calcined clay PY - 2026 SN - 978-3-032-14170-5 DO - https://doi.org/10.1007/978-3-032-14170-5_16 SP - 148 EP - 157 PB - Springer CY - Cham AN - OPUS4-65355 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gunella, F. A1 - Kunisch, E. A1 - Maenz, S. A1 - Horbert, V. A1 - Xin, L. A1 - Mika, J. A1 - Borowski, J. A1 - Bischoff, S. A1 - Schubert, H. A1 - Sachse, A. A1 - Illerhaus, Bernhard A1 - Günster, Jens A1 - Bossert, J. A1 - Jandt, K. D. A1 - Plöger, F. A1 - Kinne, R. W. A1 - Brinkmann, O. A1 - Bungartz, M. ED - Carragee, T1 - The GDF5 mutant BB-1 enhances the bone formation induced by an injectable, poly(l-lactide-co-glycolide) acid (PLGA) fiber-reinforced, brushite-forming cement in a sheep defect model of lumbar osteopenia N2 - BACKGROUND CONTEXT: Targeted delivery of osteoinductive bone morphogenetic Proteins (eg, GDF5) in bioresorbable calcium phosphate cement (CPC), potentially suitable for vertebroplasty and kyphoplasty of osteoporotic vertebral fractures, may be required to counteract augmented local bone catabolism and to support complete bone regeneration. The biologically optimized GDF5 Mutant BB-1 may represent an attractive drug candidate for this purpose. PURPOSE: The aim of the current study was to test an injectable, poly (l-lactide-co-glycolide) acid (PLGA) fiber-reinforced, brushite-forming CPC containing low-dose BB-1 in a sheep lumbar osteopenia model. STUDY DESIGN/ SETTING: This is a prospective experimental animal study. METHODS: Bone defects (diameter 5 mm) were generated in aged, osteopenic female sheep and were filled with fiber-reinforced CPC alone (L4; CPC+fibers) or with CPC containing different dosages. KW - Bone morphogenetic protein; KW - Bone regeneration; KW - Micro-Computed-Tomography; KW - Calcium phosphate cement; KW - GDF-5 mutant; KW - Large animal model sheep; KW - Osteoporotic vertebral fracture PY - 2018 DO - https://doi.org/10.1016/j.spinee.2017.10.002 SN - 1529-9430 SN - 1878-1632 VL - 18 IS - 2 SP - 357 EP - 369 PB - Elsevier CY - New York AN - OPUS4-44561 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Torge, Manfred A1 - Adam, Karin A1 - Feldmann, Ines A1 - Kruschke, Detlef ED - Martin, F. T1 - Naturwissenschaftliche Untersuchungen an Gläsern, Malschichtproben und Bleiprofilen aus den Kirchen St. Jacobi in Greifswald, St. Marien und St. Nikolai in Rostock PY - 2005 SN - 3-361-00594-9 SP - 127 EP - 137 PB - Ed. Leipzig CY - Leipzig AN - OPUS4-11602 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bäßler, Ralph A1 - Burkert, Andreas A1 - Frolund, T. A1 - Klinghoffer, O. ED - Mietz, J. T1 - Use of portable equipment to determine the corrosion state of concrete structures PY - 2006 SN - 1-8456-9210-1 SN - 1354-5116 IS - 38 SP - 159 EP - 169 PB - Woodhead CY - Cambridge AN - OPUS4-14516 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vasilic, Ksenija A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Stark, J. T1 - Experimental and numerical studies on calibration of a rotational rheometer for cementitious materials T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 PY - 2009 SN - 978-3-00-027265-3 VL - 1 SP - 1-1135 - 1-1140 CY - Weimar AN - OPUS4-20300 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten A1 - Meng, Birgit A1 - Brouwers, H.J.H. ED - Aguiar, J. B. ED - Jalali, S. ED - Camoes, A. ED - Ferreira, R.M. T1 - Influence of ambient temperature conditions on the effect of stabilising polymers in cementitious building materials T2 - 13th International Congress on polymers in concrete - ICPIC 2010 CY - Funchal-Madeira, Portugal DA - 2010-02-11 KW - Stabilising agent KW - Polycarboxylate ether KW - Polysaccharides KW - Starch ether KW - Biopolymers KW - Rheology KW - Setting PY - 2010 SN - 978-972-99179-4-3 SP - 241 EP - 248 CY - Funchal-Madeira, Portugal AN - OPUS4-21971 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Burkert, Andreas A1 - Eich, Gerd A1 - Bäßler, Ralph A1 - Isecke, Bernd ED - Leonhard, H. T1 - Erfassung korrosionsrelevanter Größen im Stahlbetonbau T2 - Jahrestagung. Gesellschaft für Korrosionsschutz 2003 ; GfKORR-Jahrestagung 2003 CY - Frankfurt am Main, Deutschland DA - 2003-11-11 KW - Stahlbetonbau KW - Bewehrungsstahlkorrosion KW - Elektrochemische Untersuchungsmethoden PY - 2003 SN - 3-935406-08-8 SP - 73 EP - 93 PB - GfKORR CY - Frankfurt am Main AN - OPUS4-2764 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weltschev, Margit A1 - Bäßler, Ralph A1 - Werner, H. A1 - Behrens, R. T1 - Suitability of High-Alloyed Metallic Materials for Tanks for the Transport of Dangerous Goods - BAM-List T2 - 11th International Symposium "Loss Prevention 2004" CY - Prague, Czech Republic DA - 2004-05-31 KW - BAM-List KW - Dangerous goods KW - Compatibility evaluations KW - High-alloyed metallic tank materials KW - Corrosion tests KW - Korrosion KW - Höherlegierte metallische Tankwerkstoffe KW - BAM-Liste PY - 2004 SN - 80-0201574-6 SP - PG4478 EP - PG4489 PB - Ceská Spolecnost Chemického Inzenýrství CY - Prag AN - OPUS4-3576 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Römich, H. A1 - Torge, Manfred A1 - Adam, Karin A1 - Feldmann, Ines A1 - Müller, Wolfgang A1 - Möhrle, G. T1 - Untersuchung alternativer bzw. ergänzender Reinigungsmethoden KW - Kulturguterhaltung KW - Bienenwachs KW - Carnaubawachs PY - 2004 SN - 3-361-00577-9 SP - 100 EP - 108 PB - Ed. Leipzig CY - Leipzig AN - OPUS4-3461 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bäßler, Ralph A1 - Klinghoffer, O. A1 - Goltermann, P. ED - Casas, J. R. T1 - Smart Structures - Embeddable Sensors for Use in the Integrated Monitoring Systems of Concrete Structures T2 - 1st International Conference on Bridge Maintenance, Safety and Management ; 1st IABMAS '02 CY - Barcelona, Spain DA - 2002-07-14 KW - Monitoring KW - Concrete KW - Deterioration KW - Corrosion KW - Chloride KW - Carbonation and Moisture PY - 2002 SN - 84-95999-05-6 SP - 1 EP - 8 PB - International Center for Numerical Methods in Engineering (CIMNE) CY - Barcelona AN - OPUS4-1619 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bäßler, Ralph A1 - Froelund, T. A1 - Jensen, F. M. ED - Casas, J. R. T1 - Smart Structures - Determination of Reinforcement Corrosion Rate by Means of the Galvanostatic Pulse Technique T2 - 1st International Conference on Bridge Maintenance, Safety and Management ; 1st IABMAS '02 CY - Barcelona, Spain DA - 2002-07-14 KW - Corrosion rate KW - Reinforcement KW - Weight loss KW - Service life predictions PY - 2002 SN - 84-95999-05-6 SP - 1 EP - 8 PB - International Center for Numerical Methods in Engineering (CIMNE) CY - Barcelona AN - OPUS4-1616 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bäßler, Ralph A1 - Burkert, Andreas A1 - Frölund, T. A1 - Klinghoffer, O. T1 - Usage of portable equipment for determination of corrosion stage of concrete structures T2 - EUROCORR 2001 CY - Riva del Garda, Italy DA - 2001-09-30 KW - Portable equipment KW - Corrosion risk KW - Humidity KW - Chloride induced corrosion KW - Reinforced and prestressed concrete structures PY - 2001 SN - 88-85298-41-9 PB - Associazione Italiana di Metallurgia CY - Milano AN - OPUS4-1179 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bäßler, Ralph A1 - Burkert, Andreas A1 - Frolund, T. T1 - GPM-Portable Equipment for Determination of Corrosion Stage of Concrete Structures - Laboratory and On-site Experiences N2 - During a Brite/Euram Project several European partners developed and produced an integrated monitoring system. So the inspection and maintenance costs and the traffic impairments can be reduced. One part of this project was related to portable techniques for evaluation of reinforcement corrosion. During this work a newly developed, hand held, easily to handle, portable equipment based on the galvanostatic pulse method (GPM) was tested. This paper deals with the results and analysis of the GPM measurements performed on a highway-bridge exposed to de-icing salts as well as the results of laboratory tests. Results of average corrosion rates determined by weight loss and galvanostatic pulse technique were compared. Special attention was paid to the comparability of instrument readings to real behavior. Finally the necessary precautions which need to be taken when the on site data are used for life prediction of structures are discussed. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/v047/v047.htm SN - 3-931381-49-8 PB - DGZfP CY - Berlin AN - OPUS4-2399 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rogge, Andreas A1 - Rücker, Werner A1 - Baeßler, Matthias T1 - Tragverhalten und Zustandsbewertung von Offshore-Windenergieanlagen unter hochzyklischer Beanspruchung N2 - Die hochzyklischen Einwirkungen auf Offshore-Windenergieanlagen führen zu bemessungsrelevanten Ermüdungsbeanspruchungen aller Anlagenteile einschließlich der baulichen Konstruktion. Daraus ergeben sich diverse Fragestellungen hinsichtlich der Zuverlässigkeit und Wirtschaftlichkeit dieser Anlagen, die hier beispielhaft am Langzeit-Verformungsverhalten der Gründungskonstruktionen dargestellt sind. Die dynamischen Eigenschaften haben erhebliche Konsequenzen für die konstruktive und betriebstechnische Auslegung der Anlagen. Eine geeignete Möglichkeit sowohl zur Erfassung des Langzeitverhaltens als auch zur Erkennung von Schädigungsvorgängen stellt das Structural Health Monitoring mit unmittelbarer Ergebnisbewertung dar. Ein geeignetes Messsystem und die erforderlichen Auswertungsroutinen wurden im Rahmen eines Forschungsprojektes entwickelt, vergleichend bewertet und im Originalmaßstab erprobt. KW - Gründung KW - Langzeitverhalten KW - Ermüdung KW - Schädigung KW - Monitoring PY - 2012 SN - 1431-5122 N1 - Serientitel: Berichte aus dem konstruktiven Ingenieurbau – Series title: Berichte aus dem konstruktiven Ingenieurbau VL - 12/4 SP - 227 EP - 234 AN - OPUS4-27055 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rohrmann, Rolf A1 - Rücker, Werner A1 - Thöns, Sebastian A1 - Said, Samir A1 - Schmid, Wolfgang T1 - Ergebnisse der Dauerüberwachung an einem Prototypen von Offshore-Windenergieanlagen T2 - 3. VDI-Fachtagung - Baudynamik CY - Kassel, Deutschland DA - 2009-05-14 KW - Integrated Monitoring System KW - Offshore wind turbines KW - Assessment KW - Damage identification KW - Load monitoring PY - 2009 SN - 978-3-18-092063-4 SN - 0083-5560 VL - 2063 SP - 455 EP - 466 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-19795 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schildberg, H.-P. A1 - Holtappels, Kai ED - Suter, G. ED - de Rademaeker, E. T1 - The course of explosions of CH4/O2/N2-mixtures in a 20 l sphere T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - Deflagration KW - Detonation KW - Explosion regions PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 475 EP - 478 CY - Brugge, Belgium AN - OPUS4-21491 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Holtappels, Kai A1 - Schröder, Volkmar A1 - Pekalski, A. A1 - Schildberg, H.-P. A1 - Pasman, H.J. ED - Suter, G. ED - de Rademaeker, E. T1 - Process safety by oxygen monitoring T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 181 EP - 186 CY - Brugge, Belgium AN - OPUS4-21441 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Hensel, Christina A1 - Schmidtchen, Ulrich A1 - Holtappels, Kai T1 - The behavior of acetylene cylinders involved in fire: An experimental and numerical analysis N2 - Fire exposure tests of acetylene cylinders were performed. The purpose of the experiments was to gather information on the behavior in fire of such vessels, depending on the initial charge of acetylene. In fact "empty" acetylene cylinders still contain the solvent in which acetylene is dissolved plus the amount of acetylene to saturation at atmospheric pressure and ambient temperature and may still constitute a threat to safety. In the fire exposure tests performed the hazardousness of these vessels was demonstrated, since it was observed that not only fully charged acetylene cylinders but also cylinders with saturated solvent can explode, provided the heat transfer to the vessel is sufficient. The times to explosion were shorter for fully charged cylinders, due to the higher initial pressure and to the faster pressure increase. The effects of the explosions are comparable for both fully charged cylinders and for cylinders with saturated solvent, except for the smaller fireball which is produced in the second case, due to the smaller amount of fuel available. In both cases the cylinder walls or at least fragments can fly further than 100 m away from the burst location. Results of the experiments are presented in the paper. During the tests, temperature measurements at the cylinder walls and in the cylinder interior were performed. Furthermore, the pressure in the cylinder was recorded. The collected data will serve for the validation of a numerical model for the simulation of the heating of acetylene cylinders involved in fire and of the afterward cooling with water, which has been developed. The constitutive model equations and the results of some simulations are presented in the paper. T2 - 19th International congress of chemical and process engineering (CHISA 2010) / 7th European congress of chemical engineering (ECCE-7) CY - Prague, Czech Republic DA - 2010-08-28 KW - Safety KW - Acetylene KW - Heat transfer KW - Fire KW - Simulation PY - 2010 SN - 978-80-02-02210-7 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. IS - F3.1 / 0973 SP - 1 EP - 13 CY - Prague, Czech Republic AN - OPUS4-21923 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Banach, Ulrich A1 - Tiebe, Carlo A1 - Hübert, Thomas ED - Matteo Pardo, ED - Giorgio Sberveglieri, T1 - Application of electronic nose and ion mobility spectrometer to quality control of spice mixtures T2 - 13th International symposium on olfaction and electronic nose CY - Brescia, Italy DA - 2009-04-15 KW - Electronic nose KW - Ion mobility spectrometer KW - Spice mixtures KW - Product adulteration KW - Multivariate data analysis PY - 2009 SN - 978-0-7354-0674-2 N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings VL - 1137 SP - 301 EP - 302 AN - OPUS4-19572 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Theiler, Geraldine A1 - Gradt, Thomas T1 - Mechanical and Tribological Properties of Polymer Composites at Cryogenic Temperatures N2 - This paper presents the mechanical and tribological properties of Polytetrafluoroethylene (PTFE) and Polyetheretherketone (PEEK) matrix composites filled with short carbon fibers in cryogenic environments. Tensile tests were performed at room temperature (RT) in air and in LN2. Tribological experiments were carried out with a pin-on-disc configuration at RT, in LN2, in LH2 and in LHe. PEEK composites have a better tribological performance than PTFE materials especially regarding the wear resistance. T2 - 21st International Cryogenic Engineering Conference `06 (ICMC `06) CY - Prague, Czech Republic DA - 2006-07-17 KW - Tribologie KW - Zugfestigkeit KW - Polymerkomposite KW - Kryotechnik KW - PEEK KW - PTFE PY - 2006 SN - 978-80-239-8884-0 SN - 0151-1637 VL - 2 SP - 47 EP - 51 CY - Prague, Czech Republic AN - OPUS4-17397 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Theiler, Geraldine A1 - Gradt, Thomas ED - Wilson, Andrew T1 - Tribological Behaviour of PEEK Composites in Vacuum Environment N2 - For tribological components working under extreme conditions, such as vacuum, or broad temperature ranges, it is often a problem to achieve acceptable durability of their friction parts. Thus, new material requirements are involved for these tribo-systems, in particular regarding operability and reliability. At BAM, several projects were conducted in the recent years, dealing with the tribological properties of friction couples at cryogenic temperature and in vacuum environment. This paper describes the vacuum and ultra high vacuum tribometers constructed at BAM and presents experiments carried out with polymer composites. The experiments presented were performed with PEEK, filled with solid lubricants, against 304 steel with a pin-on-disc configuration in oscillating sliding. Friction tests were carried out in vacuum in the temperature range between -40°C and +160°C and in ultra high vacuum at room temperature. KW - Tribologie KW - Vakuum KW - Polymere KW - Kompositwerkstoffe KW - Festschmierstoffe PY - 2007 SN - 92-9291-217-6 SN - 1609-042X SP - 1 EP - 5 AN - OPUS4-17399 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Holtappels, Kai A1 - Brinkmann, C. A1 - Stickling, J. A1 - Schönbucher, A. T1 - Simulation des Inertgaseinflusses auf Explosionsgrenzen auch bei nicht-atmosphärischen Bedingungen am Beispiel von Alkane/Luft-Gasgemischen T2 - 20. Deutscher Flammentag CY - Essen, Deutschland DA - 2001-09-04 PY - 2001 SN - 3-18-091629-X SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1629 SP - 545 EP - 550 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-1092 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thöns, Sebastian A1 - McMillan, D. ED - Karki, R. ED - Billinton, R. ED - Vermar, A.K. T1 - Condition monitoring benefit for operation support of offshore wind turbines N2 - As more offshore wind parks are commissioned, the focus will inevitably shift from a planning, construction, and warranty focus to an operation, maintenance, and investment payback focus. In this latter case, both short-term risks associated with wind turbine component assemblies, and long-term risks related to integrity of the support structure, are highly important. This research focuses on the role of condition monitoring to lower costs and risks associated with short-term reliability and long-term asset integrity. This enables comparative estimates of the life cycle costs and reduction in uncertainty, both of which are of value to investors. KW - Condition monitoring KW - Offshore wind KW - OperationRisk KW - Life cycle cost PY - 2014 SN - 978-81-322-1797-8 SN - 978-81-322-1798-5 DO - https://doi.org/10.1007/978-81-322-1798-5_11 N1 - Serientitel: Reliable and sustainable electric power and energy systems management – Series title: Reliable and sustainable electric power and energy systems management SP - 169 EP - 182 PB - Springer AN - OPUS4-31275 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kluge, Martin A1 - Eliezer, D. A1 - Holtappels, Kai A1 - Krause, Heike A1 - Ried, Peter T1 - Pressure resistance of glass capillary structures for gas storage purposes T2 - 1st International conference on materials for energy CY - Karlsruhe, Germany DA - 2010-07-04 KW - Dimerization KW - Numerical simulation KW - CFD KW - FEM KW - Self heating KW - TFE PY - 2010 SN - 978-3-89746-117-8 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. SP - 752 EP - 754 AN - OPUS4-23042 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Theiler, Geraldine A1 - Hübner, Wolfgang A1 - Klein, P. A1 - Friedrich, K. T1 - Tribologisches Verhalten der Werkstoffpaarung Polymerverbundwerkstoff/Stahl bei tiefen Temperaturen T2 - 44. Tribologie-Fachtagung CY - Göttingen, Deutschland DA - 2003-09-22 PY - 2003 SN - 3-00-003404-8 VL - 1 SP - 8-1-8-12 PB - GfT CY - Moers AN - OPUS4-2664 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Giese, Lutz A1 - Weimann, Karin A1 - Loge, Kristina T1 - Die edle Dame India und der böse Bube Cadmius - Möglichkeiten der nassmechanischen Aufbereitung in der Abfallbehandlung zur Wiederverwertung von PV-Dünnschichtmodulen T2 - 18. Symposium Photovoltaische Solarenergie CY - Kloster Banz, Deutschland DA - 2003-03-12 PY - 2003 SN - 3-934681-25-5 VL - 2 SP - 394 EP - 399 PB - Ostbayerisches Technologie-Transfer-Institut CY - Regensburg AN - OPUS4-2826 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Giese, Lutz A1 - Weritz, Friederike A1 - Weimann, Karin A1 - Niederleithinger, Ernst A1 - Ulbricht, J.P. ED - Dincer, I. T1 - Bricks made of sludge from the Izmir bay - an integrative approach for the recycling of sludge - preliminary results T2 - 1st International Exergy, Energy and Environment Symposium ; IEEES-1 CY - Izmir, Turkey DA - 2003-07-13 PY - 2003 SN - 975-288440-7 SP - 995 EP - 1003 CY - Izmir AN - OPUS4-2829 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Giese, Lutz A1 - Weimann, Karin A1 - Loge, Kristina ED - Dincer, I. T1 - Thin Film PV-Modules (CIS and CdTe) - Wet Processing and Recycling T2 - 1st International Exergy, Energy and Environment Symposium ; IEEES-1 CY - Izmir, Turkey DA - 2003-07-13 PY - 2003 SN - 975-288440-7 SP - 1005 EP - 1009 CY - Izmir AN - OPUS4-2827 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wongpanya, Pornwasa A1 - Böllinghaus, Thomas A1 - Lothongkum, G. ED - H.K.D.H. Bhadeshia, ED - H. Cerjak, ED - E. Kozeschnik, T1 - Numerical simulation of hydrogen removal heat treatment procedures in high strength steel welds KW - Hydrogen removal heat treatment KW - High strength steel KW - Numerical simulation KW - Hydrogen assisted cold cracking PY - 2007 SN - 978-3-902465-69-6 SP - 743 EP - 765 CY - Graz, Austria AN - OPUS4-16496 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dorsch, T. A1 - Saarinen, K. A1 - Roos, E. A1 - Böllinghaus, Thomas A1 - Cerjak, H. A1 - Enzinger, N. ED - Cerjak, H. T1 - Results of stress corrosion investigation on steel and weldments on steels S890 and S690 T2 - Conference on High Strength Steels for Hydropower Plants CY - Graz, Austria DA - 2005-07-05 PY - 2005 SN - 3-902465-21-2 SP - Paper 04, 1 EP - 49 PB - Verl. der Techn. Univ. Graz CY - Graz AN - OPUS4-11856 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hofmann-Böllinghaus, Anja ED - Schulz, E. T1 - Modellierung von Brandszenarien - Brandausbreitung, Rauchausbreitung und Übertragbarkeit T2 - Fachsymposium "Brandschutz in Berlin" CY - Berlin, Deutschland DA - 2006-05-11 KW - Brandmodellierung KW - CFD Modellierung KW - Großversuch KW - Rauchmelder PY - 2006 SN - 3-9810797-5-2 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. N1 - Serientitel: Bahntechnik aktuell – Series title: Bahntechnik aktuell IS - 6 SP - 69 EP - 76 PB - IFV Bahntechnik CY - Berlin AN - OPUS4-12444 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tal-Gutelmacher, E. A1 - Eliezer, Dan A1 - Böllinghaus, Thomas T1 - Hydrogen Behavior in GTA Welded Ti-6Al-4V and Beta-21S Aerospace Applicative Titanium Alloys T2 - 2006 Beijing International Materials Week CY - Beijing, China DA - 2006-06-25 KW - Titanium alloys KW - Ti-6Al-4V KW - Beta-21S KW - Hydrogen embrittlement KW - Hydrogen desorption PY - 2007 SN - 0-87849-432-4 SN - 0255-5476 VL - 546-549/3 SP - 1413 EP - 1420 PB - Trans Tech Publ. CY - Stafa-Zürich AN - OPUS4-14511 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böllinghaus, Thomas ED - Moody, N. T1 - Hydrogen assisted cracking of supermartensitic stainless steels T2 - International Conference on Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions CY - Moran, WY, USA DA - 2002-09-22 PY - 2003 SN - 0-87339-501-8 SP - 1009 EP - 1018 PB - TMS CY - Warrendale, Pa. AN - OPUS4-15488 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hofmann-Böllinghaus, Anja T1 - Brandschutzforschung an der BAM - Aktuelle und zukünftig verfügbare Testverfahren T2 - Expertentagung zum Brandschutz bei Schienenfahrzeugen und Bahn-Bauwerken CY - Berlin, Deutschland DA - 2007-03-01 PY - 2007 SN - 978-3-9810797-9-1 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. IS - 10 SP - 7 EP - 11 PB - IFV Bahntechnik CY - Berlin AN - OPUS4-14997 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Zimmer, Peter A1 - Seeger, Dirk A1 - Böllinghaus, Thomas ED - Cerjak, H. T1 - Hydrogen permeation and related material properties of high strength steels T2 - Conference on High Strength Steels for Hydropower Plants CY - Graz, Austria DA - 2005-07-05 PY - 2005 SN - 3-902465-21-2 SP - Paper 17, 1 EP - 18 PB - Verl. der Techn. Univ. Graz CY - Graz AN - OPUS4-11855 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Eliezer, Dan A1 - Hamu, G.B. A1 - Cross, Carl Edward A1 - Böllinghaus, Thomas ED - Galloway, T. T1 - Effect of grain refinement on the strength and corrosion of AZ31 magnesium alloy following severe plastic deformation N2 - Gas tungsten arc welds made on wrought magnesium AZ31 plate have been characterized for corrosion in saline solution (3.5% NaCl). Microstructural changes induced by the welding process resulted in different environmental behaviour of each zone (BM-base metal, HAZ-heat affected zone and FZ-fusion zone). The faster kinetics of corrosion in FZ and especially HAZ are attributed to (a) the coarse microstructure, consisting of large grains, and (b) very small amounts of ß-phase in the grain boundaries. Also, hardness traverses have shown that these zones are weaker than the base metal. Based on the significant effect of grain size on strength in magnesium alloys, the weld metal grains have been systematically refined using controlled oscillation during welding, and by adding a grain refiner to the weld pool. Detailed microstructure analyses have been carried out and the relationships between corrosion behaviour, mechanical properties and microstructure (grain refinement and second-phases formation) are highlighted. T2 - 135th Annual Meeting of the Minerals, Metals & Materials Society CY - San Antonio, TX, USA DA - 2006-03-12 PY - 2006 SN - 978-0-87339-619-6 VL - 135 SP - 1 EP - 4 PB - TMS, the Minerals, Metals & Materials Society CY - Warrendale AN - OPUS4-14452 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fedelich, Bernard A1 - Künecke, Georgia A1 - Epishin, Alexander T1 - Modelling of rafting and its influence in Ni-base superalloys T2 - 8th Liège Conference "Materials for Advanced Power Engineering 2006" CY - Liege, Belgium DA - 2006-01-01 KW - Superalloys KW - Modelling KW - Rafting KW - Creep KW - Single crystals PY - 2006 SN - 3-89336-436-6 N1 - Serientitel: Schriften des Forschungszentrums Jülich - Reihe Energietechnik / Energy Technology – Series title: Schriften des Forschungszentrums Jülich - Reihe Energietechnik / Energy Technology IS - 53 SP - 475 EP - 484 PB - Forschungszentrum Jülich CY - Jülich AN - OPUS4-13983 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hofmann-Böllinghaus, Anja ED - Dietmar Hosser, T1 - Brandgefahr im Kinderzimmer - Numerische und experimentelle Untersuchung von verschiedenen Szenarien T2 - Braunschweiger Brandschutz-Tage `07, 21. Fachtagung Brandschutz - Forschung und Praxis CY - Braunschweig, Deutschland DA - 2007-09-26 KW - Wohnungsbrände KW - CFD Modellierung KW - Großversuch KW - Flammschutzmittel PY - 2007 SN - 978-3-89288-181-0 SN - 0934-2419 SN - 1439-3875 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. IS - 199 SP - 63 EP - 72 AN - OPUS4-16109 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wolf, Martin A1 - Kannengießer, Thomas A1 - Böllinghaus, Thomas ED - Carl E. Cross, ED - John C. Lippold, ED - Böllinghaus, Thomas ED - Herold, H. T1 - Determination of critical strain rate for solidification cracking by numerical simulation PY - 2008 SN - 978-3-540-78627-6 IS - Part I SP - 77 EP - 92 PB - Springer CY - Berlin AN - OPUS4-24488 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böllinghaus, Thomas A1 - Gumenyuk, Andrey A1 - Quiroz Penaranda, Vanessa ED - Lippold, J. ED - Böllinghaus, Thomas ED - Cross, C.E. ED - et al., T1 - Short Term Metallurgy and Hot Cracking During Laser Beam Welding of Austenitic Stainless Steels N2 - Industrial application of high alloyed austenitic stainless steel laser welding has grown significantly in the recent time due to the continuous improvement of compact and high power density lasers systems. The application of such processes meanwhile ranges from pipeline or railway car body manufacturing to the production of household wares. The largest advantages of the laser application to welding production are much higher welding speeds, reduction or complete exclusion of welding consumables, easy design of the weld joints, decrease of thermal distortions and thus, costs saving. In contrast to arc welding, laser beam welding might particularly be associated with metallurgical defects, like the formation of hot cracks. Such phenomena are related to an order of magnitude higher temperature gradients and cooling rates in the solidification zone, providing rapid solidification kinetics which may cause significant segregation of alloying elements such as Ni and Cr and respective undercooling of the solute at the solidification front. In specific metastable austenitic stainless steels alloys in vicinity of the so called eutectic rim of the Fe-Cr-Ni constitutional diagram, such effects might entail a change of solidification mode from primary ferrite to austenite, providing an increased risk of solidification cracking. Previous studies has shown that the primary solidification mode change during laser beam welding of Cr-Ni austenitic stainless steels such alloys could be effectively influenced by nitrogen absorption as well as by the laser plasma type and also proved the occurrence of metastable primary ferritic solidification. In the present contribution, such results are compared to recent investigations of laser welding newer austenitic Fe-Cr-Mn-Ni steel grades by identification of respective hot cracking critical welding parameter intervals and strain rates in the Controlled Thermal Weldability (CTW) Test. PY - 2011 SN - 978-3-642-16863-5 DO - https://doi.org/10.1007/978-3-642-16864-2_7 IS - Part 2 SP - 103 EP - 129 PB - Springer CY - Berlin, Heidelberg AN - OPUS4-24348 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hofmann-Böllinghaus, Anja A1 - Krüger, Simone A1 - Klippel, Alexander T1 - Experimental and numerical investigations of the burning behavior of vehicle materials small, intermediate and large scale investigations T2 - Interflam 2010 - 12th International fire science & engineering conference (Proceedings) CY - Nottingham, UK DA - 2010-07-05 PY - 2010 SN - 978-0-9541216-6-2 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. VL - 2 SP - 1139 EP - 1150 CY - London, UK AN - OPUS4-21853 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schobbert, Helmut A1 - Böllinghaus, Thomas A1 - Schöler, Annett T1 - Heißrißsicherheit hochlegierter austenitischer Stähle beim Laser- und Hybridschweißen N2 - Eine Reihe nichtrostender austenitischer Cr-Ni-Stähle in der Nähe der eutektischen Rinne können beim Laserschweißen sowohl primär ferritisch als auch primär austenitisch erstarren. Speziell konzipierte Heißrißprüfungen zeigen eine Rißanfälligkeit der im Unterschied zum WIG-Schweißen mit großen Streckenenergien beim Laserschweißen mit kleinen Streckenenergien primär austenitisch erstarrenden Gefügebereiche. Die Ursache dafür ist, daß im Unterschied zu einer langsamen primär ferritischen Erstarrung bei einer schnellen Erstarrung über metastabile primär austenitische Zustände Restschmelzen entstehen können, die gegenüber dem Grundwerkstoff erhebliche temperaturabhängige Zähigkeitsverluste aufweisen. Es wird gezeigt, wie sich durch die Wahl auf den Werkstoff gezielt abgestimmter Schweißparameter die Heißrißsicherheit beim Laserschweißen weitestgehend sicherstellen läßt. Darüber hinaus werden Perspektiven vorgestellt, wie die Heißrißsicherheit bei Hybridschweißen durch die Auswahl vom Zusatzwerkstoffen und durch eine geeignete Prozeßführung zu erreichen ist. T2 - 12. Jahrestagung Schadensanalyse CY - Würzburg, Germany DA - 18.10.2000 PY - 2000 SN - 3-18-091556-0 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1556 SP - 225 EP - 240 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-11849 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Xu, Ping A1 - Weber, Gert A1 - Böllinghaus, Thomas A1 - Krause, Hans-Joachim ED - Blom, A. F. T1 - Determination of relevant fatigue characteristics for joined thin sheet metal structures on suitable specimens with appropriate test methods T2 - 8th FATIGUE 2002 ; 8th International Fatigue Congress CY - Stockholm, Sweden DA - 2002-06-03 PY - 2002 SN - 1-901537-30-7 VL - 2 SP - 1103 EP - 1110 PB - EMAS, Engineering Materials Advisory Services CY - Cradley Heath, West Midlands AN - OPUS4-1385 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kannengießer, Thomas A1 - Mc Inerney, T. A1 - Florian, Wolfgang A1 - Böllinghaus, Thomas A1 - Cross, C.E. ED - Cerjak, H. T1 - The influence of local weld deformation on hot cracking susceptibility T2 - 6th International Seminar on the Numerical Analysis of Weldability CY - Seggauberg, Austria DA - 2001-10-01 PY - 2002 SN - 1-902653-56-4 N1 - Serientitel: Books of IOM3 – Series title: Books of IOM3 IS - 784 SP - 803 EP - 818 PB - Maney CY - London AN - OPUS4-1793 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böllinghaus, Thomas A1 - Viyanit, Ekkarut ED - Cerjak, H. T1 - Numerical Simulations of Hydrogen-Assisted Cracking in Girth Welds of Supermartensitic Stainless Steel Pipelines - Report I T2 - 6th International Seminar on the Numerical Analysis of Weldability CY - Seggauberg, Austria DA - 2001-10-01 PY - 2002 SN - 1-902653-56-4 N1 - Serientitel: Books of IOM3 – Series title: Books of IOM3 IS - 6 SP - 839 EP - 855 PB - Maney CY - London AN - OPUS4-1795 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fedelich, Bernard A1 - Frenz, Holger A1 - Österle, Werner A1 - Ohm, Katrin ED - Petit, J. T1 - Experimental and numerical evaluation of fatigue crack initiation and propagation for IN738LC at 850°C N2 - Interrupted LCF-tests at 850 deg C for Inconel 738LC have been carried out and the specimens have been intensively examined by REM to quantify the evolution of fatigue damage. Surface crack nucleation at oxidatized grain boundaries and coalescence of neighboring flaws occurred during the whole experiment. An anomalous fast single crack growth is observed just after nucleation, followed by a relative stagnation of the propagation in absence of coalescence. A statistical model is proposed that describes these pheonmena. It leads to an integro-differential equation for the crack density f(c,n) after n cycles, similar to the Bolzmann equation which describes the collision of molecules in a dilute gas. T2 - 11th Biennial European Conference on Fracture (ECF) CY - Poitiers-Futuroscope, France DA - 1996-09-03 PY - 1996 SN - 0-947817-92-1 VL - 2 SP - 1237 EP - 1242 PB - EMAS CY - Warley, West Midlands AN - OPUS4-2512 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Seeger, Dirk A1 - Böllinghaus, Thomas A1 - Hoffmeister, H. ED - Olive, J. M. ED - Puiggali, M. ED - Zielinski, A. T1 - Hydrogen permeation in supermartensitic stainless steels T2 - 2nd International Conference on Environmental Degradation of Engineering Materials CY - Bordeaux, France DA - 2003-06-29 KW - Hydrogen permeation KW - Supermartensitic stainless steel KW - Diffusion coefficient KW - Subsurface concentration KW - Heat treatment PY - 2003 SN - 1-904350-07-0 N1 - Serientitel: Event of the European Federation of Corrosion – Series title: Event of the European Federation of Corrosion IS - 264 SP - 1 EP - 8(?) PB - Universite de Bordeaux 1, Laboratoire de Mécanique-Physique AN - OPUS4-3111 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hofmann-Böllinghaus, Anja A1 - Knaust, Christian A1 - Beard, A. T1 - High Risk Items In Home Fires - Fire Safety Regulations And Benefit For Home Fire Safety T2 - Flame Retardants 2008 Conference CY - London, UK DA - 2008-02-12 PY - 2008 SN - 978-0-9556548-1-7 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. SP - 83 EP - 92 PB - Interscience Communications CY - London, UK AN - OPUS4-17756 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fedelich, Bernard A1 - Frenz, Holger A1 - Österle, Werner A1 - Ohm, Katrin ED - Lütjering, G. T1 - A stochastic model for LCF small crack growth in a nickel-base superalloy T2 - 6th International Fatigue Congress CY - Berlin, Germany DA - 1996-05-06 PY - 1996 SN - 0-08-042268-3 VL - 96 IS - 2 SP - 1263 EP - 1268 PB - Pergamon CY - Oxford AN - OPUS4-2511 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Noack, Volker A1 - Böllinghaus, Thomas A1 - Michael, Thomas T1 - Untersuchungen zur Prozeßbeherrschung des Weichplasmaschweißens an Überlappverbindungen von hochlegierten CrNi-Stählen PY - 2002 SN - 3-934238-50-5 N1 - Serientitel: Forschung für die Praxis – Series title: Forschung für die Praxis VL - P 387 IS - P387 SP - 1 EP - 98 PB - Verl. und Vertriebsges. mbH CY - Düsseldorf AN - OPUS4-1864 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böllinghaus, Thomas A1 - Kannengießer, Thomas A1 - Schobbert, Helmut T1 - Neue werkstofftechnische Erkenntnisse und Ergebnisse aus der BAM PY - 2003 SN - 0935-0292 VL - 18.2004 SP - 80 EP - 90 PB - Verl. für Schweißen u. Verwandte Verfahren DVS-Verl. CY - Düsseldorf AN - OPUS4-2656 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hofmann-Böllinghaus, Anja A1 - Schneider, U. A1 - Cziesielski, E. T1 - Variation of Testing Conditions in Single Burning Item Tests T2 - 10th International Fire Science & Engineering Conference "Interflam 2004" CY - Edinburgh, Scotland, UK DA - 2004-07-05 KW - Single burning item test KW - Simulation KW - Fire combustion KW - Computational Fluid Dynamics PY - 2004 SN - 0-9541216-4-3 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. SP - 17 EP - 23 PB - Interscience Communications CY - London AN - OPUS4-3809 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schobbert, Helmut A1 - Böllinghaus, Thomas A1 - Wolf, Martin ED - Herlach, D. M. T1 - Metastable Primary Solidification Modes in the Fe-Cr-Ni System During Laser Welding T2 - 8th EUROMAT 2003 CY - Lausanne, Switzerland DA - 2003-01-01 PY - 2004 SN - 3-527-31011-8 VL - 8 SP - 213 EP - 226 PB - Wiley-VCH CY - Weinheim AN - OPUS4-4988 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wolf, Martin A1 - Böllinghaus, Thomas A1 - Schobbert, Helmut ED - Böllinghaus, Thomas ED - Herold, H. T1 - Influence of the Weld Pool Geometry on Solidification Crack Formation N2 - Numerous externally loaded as well as self-restraint hot cracking test procedures have been developed over the years to evaluate soldidification crack phenomena. But the interpretation and the subsequent transfer of test results towards component weldments has still to be regarded as a decisive challenge. Some progress has been achieved by hypothesizing crack / no crack criteria referring to uniform and uniaxial loading of the solidification front during welding. But, as the present results show, solidification cracking significantly depends on the geometry of the solidification front, which has so far not been considered in the respective criteria. In this contribution, the position of solidification cracks is correlated with the positiondependent strain rates along the solidification front and with the positiondependent curvature of the weld pool. Especially at positions of high curvature, an increased rate of shrinkage can be predicted on the basis of a geometrical Rate of Feeding (ROF) Rate of Shrinkage (ROS) model, corresponding to the measured positions of the solidification cracks. The assumption of position-dependent strain and strain rates along the solidification front during Varestraint-Testing has been confirmed by means of numerical simulations. T2 - International Workshop "Hot Cracking Phenomena in Welds" CY - Berlin, Germany DA - 2004-03-04 PY - 2005 SN - 3-540-22332-0 DO - https://doi.org/10.1007/b139103 SP - 245 EP - 268 PB - Springer CY - Berlin AN - OPUS4-7275 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Seeger, D.M. A1 - Kannengießer, Thomas A1 - Böllinghaus, Thomas T1 - Risssicherheit von Schweißnähten an Pipelines der Offshore-Industrie aus supermartensitischem Stahl T2 - Schweißen und Schneiden 2005 CY - Essen, Deutschland DA - 2005-09-12 KW - Supermartensit KW - Risssicherheit KW - Geschlossene Prüfkette PY - 2005 SN - 3-87155-695-5 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 237 SP - 85 EP - 91 PB - DVS-Verl. CY - Düsseldorf AN - OPUS4-11083 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böllinghaus, Thomas ED - Cerjak, H. T1 - Modelling of Hydrogen Diffusion and Cracking in Steel Welds N2 - Hydrogen assisted steel corrosion and cold cracking is still a major topic regarding the reliability of welded steel components, such as offshore platforms and pipelines. Measurement of local and crack critical hydrogen concentrations in a specific weld is difficult and not very precise. Numerical simulations of hydrogen uptake and diffusion developed within the last twenty years have to be regarded as much more effective to determine local hydrogen concentrations in crack critical regions of welds. As an overview of existing theories of the state of the art in modelling of hydrogen cracking in steels, the present contribution shows that the development of a comprehensive numerical model for both types of hydrogen assisted cracking in welds, hydrogen assisted stress corrosion cracking and cold cracking, is still a major research task. As a first step towards that direction, a basic procedure for numerical simulation of crack initiation and propagation has been developed and experimentally verified. The approach can be extended to a comprehensive quantitative model for life time prediction and risk based inspection of welded steel components. (Steel specimen used was S355 along with other materials such as AISI 321, Incoloy 800, Inconel 690 and 600.) T2 - Fifth International Seminar on the 'Numerical Analysis of Weldability' CY - Graz, Austria DA - 1999-09-01 PY - 2000 SN - 1-86125-115-7 N1 - Serientitel: Book / The Institute of Materials – Series title: Book / The Institute of Materials IS - 738 SP - 1019 EP - 1059 PB - IOM Communications CY - London AN - OPUS4-11841 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Baer, Wolfram ED - Gdoutos, E. T1 - Key Curve Methods for Dynamic Fracture Mechanics of Cast Iron? T2 - 16th European Conference of Fracture "Fracture of Nano and Engineering Materials and Structures" CY - Alexandroupolis, Greece DA - 2007-07-03 KW - Key curve KW - Fracture mechanics KW - Dynamic loading KW - Ductile cast iron KW - Single specimen technique KW - Crack resistance curve KW - Review PY - 2006 SN - 1-402-04971-4 IS - 900_tra SP - 8 pages PB - Springer CY - Dordrecht AN - OPUS4-12668 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böllinghaus, Thomas A1 - Mente, Tobias A1 - Wongpanya, Pornwasa A1 - Viyanit, Ekkarut A1 - Steppan, Enrico ED - Böllinghaus, Thomas ED - Lippold, J. C. ED - Cross, C. E. T1 - Numerical modelling of hydrogen assisted cracking in steel welds N2 - Hydrogen assisted stress corrosion and cold cracking represent still a major topic regarding the safety of welded steel components against failure in many industrial branches. Hydrogen might be introduced during fabrication welding or might be taken up from an environment during sour service or at cathodic protection. Additionally, understanding and avoidance of hydrogen entry into weld microstructures from gaseous pressurized environments becomes increasingly important for renewable energy components. There are two types of metallurgical mechanisms associated with hydrogen assisted cracking, i.e. the cracking as well as hydrogen transport and trapping mechanisms. For numerical modelling, it has to be considered that both types are not independent of each other, that the mechanisms are not yet completely clarified and that validation of such models strongly depends on implementation of the correct hydrogen related materials properties. However, quite significant achievements have been made in modelling of hydrogen assisted cracking by indirect coupling of thermal, stress-strain as well as hydrogen uptake and diffusion analyses. After a brief introduction into the subject and by revisiting various proposed cracking mechanisms, the present contribution focuses on recent developments of a numerical model based on a comparison of actual hydrogen concentrations and mechanical loads with respective hydrogen dependent material properties as crack initiation and propagation criteria. The basic procedure for numerical simulation of crack initiation and propagation is outlined and it is shown how such numerical simulations can be validated experimentally. Furthermore, it is highlighted how such a procedure has been extended to a comprehensive model for life time prediction of welded steel pipeline components and experimentally verified. Finally, it is outlined how the model can be extended to simulate cracking in heterogeneous steel microstructures on the different scales. KW - hydrogen assisted cracking KW - numerical simulation KW - supermartensitic stainless steel KW - high strength low alloyed structural steel KW - duplex stainless steel PY - 2016 UR - http://link.springer.com/chapter/10.1007%2F978-3-319-28434-7_18 UR - http://www.springer.com/us/book/9783319284323 SN - 978-3-319-28432-3 SN - 978-3-319-28434-7 DO - https://doi.org/10.1007/978-3-319-28434-7_18 SP - Part VI, 383 EP - 439 PB - Springer International Publishing CY - Switzerland ET - 1 AN - OPUS4-35593 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Schmidtchen, Ulrich A1 - Pahl, Robert A1 - Noack, Jennifer A1 - Kolvitz, Kristian A1 - Runge, Thomas A1 - Holtappels, Kai A1 - Hensel, Christina A1 - Bönig, Jürgen A1 - Schulze, Uwe A1 - Askar, Enis A1 - Frank, M. A1 - Thornton, D. T1 - Experimentelle und numerische Untersuchungen des Verhaltens von Acetylenflaschen im Feuer T2 - 12. Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Deutschland DA - 2010-06-15 KW - Acetylendruckgasbehälter KW - Unterfeuerung KW - Aufheizverhalten KW - CFD-Modellierung PY - 2010 SN - 978-3-9813550-1-7 SN - 0938-5533 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. SP - 70 EP - 72 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-21488 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Xu, Ping A1 - Böllinghaus, Thomas T1 - Fatigue testing for spot welds - problems, solutions and new development N2 - Engineering design of spot-welded components as well as computational analyses of the local stress in the weld zone require relevant fatigue test data. Those test data, however, are dependent on the applied specimens, on the specimen restraint, on the load introduction into the weld zone as well as on the definition of the specimen failure. The discussion of the advantages and drawbacks as well as of the influence of these factors shows that a deliberate selection of specimens is necessary for different test purposes. For the comparability of the test results it is essential in addition to specify comparable test conditions, e.g., specimen fixturing, load introduction and definition of the specimen failure. On account of the variety of variants, a standardization of suitable specimens and respective test conditions hence constitutes an approach to the determination of relevant and comparable test results. T2 - SAE world congress CY - Detroit, MI, USA DA - 2003-03-03 PY - 2003 UR - http://www.sae.org/technical/papers/2003-01-0976 SN - 0-7680-1191-4 SN - 0099-5908 N1 - Serientitel: SAE-SP – Series title: SAE-SP IS - 1766 SP - 87 EP - 94 PB - Society of Automotive Engineers CY - Warrendale, Pa. AN - OPUS4-2299 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neuhaus, Mathias A1 - Kannengießer, Thomas A1 - Böllinghaus, Thomas A1 - Herold, H. A1 - Hoffmeister, H. T1 - Beurteilung der Kaltrisssicherheit von Schweißverbindungen in realen Konstruktionen mit der Finite-Elemente-Methode T2 - Große Schweißtechnische Tagung "Schweißen und Schneiden" 2004 CY - Magdeburg, Deutschland DA - 2004-09-22 PY - 2004 SN - 3-87155-689-0 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 232 SP - 195 EP - 200 PB - DVS-Verl. CY - Düsseldorf AN - OPUS4-4635 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böllinghaus, Thomas A1 - Kannengießer, Thomas ED - Uwe Reisgen, T1 - Prüfen Sie noch oder bewerten Sie schon - Entwicklungen in der Untersuchung geschweißter Bauteile / Are You Still Testing or Already Evaluating - Developments in the investigation of Welded Components PY - 2007 SN - 978-3-8322-6644-8 SN - 0943-9358 SP - 41 EP - 57 PB - Shaker CY - Aachen AN - OPUS4-16270 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schröder, Volkmar A1 - Askar, Enis A1 - Acikalin, Hatice Aydan A1 - Steinbach, J. T1 - Chemically unstable gases - flammability of ethylene oxide mixtures in sterilization processes N2 - For the assessment of explosion hazards by industrial sterilization processes with ethylene oxide (EO), the flammability regions of 3-component systems EO/nitrogen/air, EO/carbon dioxide/air and EO/water vapor/air were determined. The tests were performed at temperatures of 20 °C and 100 °C and at pressures of 40 kPa and 100 kPa in accordance with the standard test method EN 1839-B. The observed flammability regions are similar in shape and typical for mixtures with ethylene oxide. According to the molecular heat capacities the regions get larger with nitrogen and smaller with carbon dioxide. They become larger with increasing pressure and increasing temperature. Using experimental data a semi-empirical model was created that allows the calculation of flammability limits of process gases in sterilization processes. Such process gases can consist of EO, nitrogen, carbon dioxide, water vapor and air. The model is based on the assumption that the adiabatic flame temperatures along the boundary curves of a flammability region have a certain temperature profile that is nearly independent of the type of the inert gas. The adiabatic flame temperatures were calculated by using the “Gaseq” Code. Using a temperature profile calculated from only one experimental system EO/inert gas/air it is possible to predict the flammability limits of systems with other inert gases or of process gases containing several inert gases. T2 - AIChE 100 - Spring National Meeting CY - New Orleans, Louisiana, USA DA - 2008-04-06 KW - Explosion protection KW - Process safety KW - Sterilization KW - Flammability limits KW - Gas mixtures PY - 2008 SN - 978-0-8169-1023-6 N1 - Serientitel: P / AIChE, American Institute of Chemical Engineers – Series title: P / AIChE, American Institute of Chemical Engineers IS - 247 SP - 1 EP - 8 PB - AIChE CY - New York AN - OPUS4-17483 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Askar, Enis A1 - Schröder, Volkmar A1 - Holtappels, Kai A1 - Acikalin, Hatice Aydan A1 - Steinbach, J. A1 - Milde, J. T1 - Berechnung der Explosionsgrenzen von Kohlenwasserstoffen in ternären Systemen nach dem Modell konstanter Temperaturprofile T2 - 9. Fachtagung "Anlagen-, Arbeit- und Umweltsicherheit" CY - Köthen, Deutschland DA - 2008-11-06 KW - Explosionsgrenzen KW - Kohlenwasserstoff KW - Inertisierung KW - Sicherheitstechnik PY - 2008 SN - 978-3-89746-099-7 SP - 1 EP - 11 PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-18303 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fedelich, Bernard A1 - Beckmann, Jörg A1 - Finn, Monika A1 - Zelewski, Mirjana A1 - Olschewski, Jürgen T1 - Determination of temperature dependent elastic constants of anisotropic materials by the resonance method T2 - Materials Week 2002 ; European Congress on Advanced Materials, their Processes and Applications ; 6th International Conference on Joining Ceramics, Glass and Metal CY - Munich, Germany DA - 2002-09-30 PY - 2002 SN - 3-88355-314-X PB - Werkstoff-Informationsges. AN - OPUS4-1790 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Holzlechner, Gerald A1 - Sobol, Oded A1 - Böllinghaus, Thomas A1 - Unger, Wolfgang ED - Udomkichdecha, W. ED - Mononukul, A. ED - Böllinghaus, Thomas ED - Lexow, Jürgen T1 - Imaging ToF-SIMS as a chemical metrology tool to support material and analytical science N2 - As a chemical metrology tool time-of-flight secondary ion mass spectrometry (ToF-SIMS) has become a very popular technique to monitor the elemental, isotopic and molecular distribution in two or three dimensions. Its reduced sampling depth, high sensitivity, great structural specificity and the direct detection of hydrogen thereby increase the emergence of ToF-SIMS for material and analytical surface science, particularly due to recent instrumental developments improving mass, depth and lateral resolution. For basic surface science, adsorption processes and surface reactivity thus can be investigated in high detail on organic as well as inorganic samples. The use of multivariate data analysis in addition can effectively assist to identify trends in the complex SIMS raw data set and define key co-variances between certain samples or mass spectra. In this contribution the essence of ToF-SIMS is illustrated by discussing two highly relevant energy applications. First, for piezoelectric electroceramics oxygen exchange active zones have been visualized to determine the impact of external field-load to the oxygen vacancy distribution between anode and cathode. As a second case study the interaction of hydrogen species with the microstructure of a duplex stainless steel was investigated. It was concluded that ToF-SIMS has a valuable essence for detailing hydrogen related degradation mechanisms. T2 - 4th WMRIF Young scientists workshop CY - Boulder, CO, USA DA - 08.09.2014 PY - 2016 SN - 978-981-287-723-9 SN - 978-981-287-724-6 DO - https://doi.org/10.1007/978-981-287-724-6_7 SP - 63 EP - 72 PB - Springer AN - OPUS4-34881 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Cross, Carl Edward A1 - Coniglio, Nicolas A1 - Schempp, Philipp A1 - Mousavi, M.G. ED - Lippold, J. ED - Böllinghaus, Thomas ED - Cross, C.E. ED - et al., T1 - Critical conditions for weld solidification crack growth N2 - The occurrence of solidification cracking during welding remains a little understood phenomenon, in spite of extensive studies and tests performed to evaluate and compare the relative weldability of many different alloys. From an approach often adopted in the welding community attributed to Prokhorov, solidification cracks are believed to form when a critical tensile strain is exceeded, specific to the alloy, assuming that the mushy-zone has limited ductility. Tensile stresses and strains normally form behind a moving weld pool as a result of solidification shrinkage and thermal contraction, as influenced by welding parameters and the degree of restraint. KW - Solidification cracking KW - Aluminium alloy KW - Crack growth KW - Strain rate model PY - 2011 SN - 978-3-642-16863-5 DO - https://doi.org/10.1007/978-3-642-16864-2_2 IS - Part 2 SP - 25 EP - 41 PB - Springer CY - Berlin, Heidelberg AN - OPUS4-23846 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schobbert, Helmut A1 - Böllinghaus, Thomas A1 - Skopp, André ED - Sepold, G. T1 - Kurzzeitmetallurgische Phänomene bei schnellen Umschmelzprozessen im System Fe-Cr-Ni in der Nähe der eutektischen Rinne PY - 2002 SN - 3-933762-08-1 N1 - Serientitel: Strahltechnik – Series title: Strahltechnik IS - 18 SP - 201 EP - 217 PB - BIAS CY - Bremen AN - OPUS4-2065 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kempel, Florian A1 - Hofmann-Böllinghaus, Anja A1 - Schartel, Bernhard A1 - Krause, Ulrich T1 - Investigations on a real fire case with downward fire spread in a family home T2 - 11th International symposium on fire protection CY - Leipzig, Germany DA - 2010-06-08 KW - Fire spread KW - Heat release rate KW - Fire simulation KW - Foam mattress PY - 2010 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. SP - 1 EP - 12 AN - OPUS4-22354 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Malow, Marcus A1 - Schmidt, Martin A1 - Krause, Ulrich ED - Böllinghaus, Thomas ED - Kitagawa, Masaki ED - Kishi, Teruo ED - Lexow, Jürgen T1 - Computational modelling of the self-ignition process to achieve safe storage of biomass T2 - 1st World Materials Research Institutes Forum (WMRIF) - Workshop for young materials scientists CY - Tsukuba, Ibaraki, Japan DA - 2008-07-22 KW - Self-ignition KW - Fire prevention KW - Storage KW - Biomass KW - Bulk materials PY - 2008 SN - 978-4-9900563-3-9 SP - XXII 1 EP - 16 CY - Tsukuba, Ibaraki, Japan AN - OPUS4-17861 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Askar, Enis A1 - Schröder, Volkmar A1 - Acikalin, Hatice Aydan A1 - Steinbach, J. A1 - Flemming, F. A1 - Redeker, T. T1 - Safety characteristics of ethylene oxide/inert gas/air-mixtures in sterilization processes T2 - XVIII. Rocníku mezinárodní konference CY - Ostrava, Czech Republic DA - 2009-09-09 KW - Explosionsschutz KW - Sterilisation KW - Explosionsgrenzen KW - Normspaltweiten PY - 2009 SN - 978-80-7385-067-8 SN - 1803-1803 SP - 503 EP - 515 AN - OPUS4-20270 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Zimmer, Peter A1 - Kannengießer, Thomas A1 - Florian, Wolfgang A1 - Böllinghaus, Thomas T1 - Kaltrissprüfungen für hochfeste Feinkornbaustähle T2 - Große Schweißtechnische Tagung "Schweißen und Schneiden" 2004 CY - Magdeburg, Deutschland DA - 2004-09-22 PY - 2004 SN - 3-87155-689-0 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 232 SP - 207 EP - 214 PB - DVS-Verl. CY - Düsseldorf AN - OPUS4-4634 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Engelking, Loenz A1 - Schröpfer, Dirk A1 - Kannengießer, Thomas A1 - Eissel, Antonia A1 - Treutler, Kai A1 - Wesling, Volker T1 - Herstellung beanspruchungsgerechter Oberflächen durch Kombination innovativer additiver und abtragender Fertigungsschritte an hochbelasteten Komponenten N2 - Die additive Fertigung mittels Schweißverfahren bietet große ökonomische Vorteile für eine ressourceneffiziente Bauteilherstellung. Offene Fragen bezüglich Homogenität, Anisotropie der Schweißgefüge und den damit verbundenen Bauteileigenschaften stehen einer wirtschaftlichen Verarbeitung oftmals im Wege. Finale Bauteilgeometrie und Oberflächengüte erfordern meist komplementäre subtraktive Fertigungsschritte. Werkstoffe für hochbelastbare Komponenten sind oftmals schwer span bar. In einem Vorhaben der BAM und des ISAF wurde untersucht, wie die Modifikation der AM-Schweißzusätze und das ultraschallunterstützte Fräsen (US) die Zerspanungssituation verbessern. Der vorliegende Artikel stellt wesentliche Zusammenhänge zwischen Legierung, Gefüge und Zerspanung zweier schwer spanbarer Hochleistungslegierungen (FeNi und CoCr) dar. Großes Potenzial zeigte neben dem US die Modifikation mit Zr und Hf bei Zulegierung in das Schweißgut mittels Beschichtung von Massivdrähten bzw. Herstellung von Fülldrähten. KW - Additive Fertigung (AM) KW - Ultraschallunterstütztes Fräsen (US) KW - Werkstoffmodifikation KW - Oberflächenintegrität KW - Zerspanbarkeit schwer spanbarer Legierungen KW - Ressourceneffizienz in Prozessketten KW - Hochleistungslegierungen KW - Technologietransfer für KMU PY - 2025 SN - 978-3-96144-304-8 VL - 2026 SP - 290 EP - 298 PB - DVS Media GmbH CY - Düsseldorf AN - OPUS4-65246 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gluth, Gregor A1 - Gaggl, M. A1 - Zhang, W. A1 - Hillemeier, B. A1 - Behrendt, F. ED - Udomkichdecha, W. ED - Böllinghaus, Thomas ED - Manonukul, A. ED - Lexow, J. T1 - Membranes made of hardened cement paste for processing wood gas - Influence of paste composition and separation factors N2 - The efficiency of wood gasification can be improved by applying membrane based gas separation operations in several of its sub-processes. In the present study the use of membranes made of hardened cement pastes for this purpose was investigated to provide a low cost alternative to conventional membrane materials. The pastes were tested for their diffusional properties in a Wicke-Kallenbach cell and analyzed with regard to their pore structure. The use of low water to binder ratios and slag and/or pozzolans led to a finer pore structure and higher separation factors; in particular, an approximately linear dependence of the separation factors on the threshold radii was observed. The results implicated that Knudsen diffusion is the prevailing diffusion mechanism in the membranes. Deviations from the theoretically expected separation factors were found, which may be ascribed to concentration polarization and channeling effects. KW - Hardened cement paste KW - Pore structure KW - Diffusion KW - Gas separation PY - 2014 SN - 978-3-319-11339-5 SN - 978-3-319-11340-1 DO - https://doi.org/10.1007/978-3-319-11340-1_20 SP - 199 EP - 209 PB - Springer AN - OPUS4-32065 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kannengießer, Thomas A1 - Florian, Wolfgang A1 - Böllinghaus, Thomas A1 - Herold, H. ED - Miannay, D. P. T1 - Analysis of welding reaction stresses and welding reaction moments in component tests - Stress characteristics dependent on the intensity of restraint N2 - Up to the present, the thermomechanical loads during welding and subsequent cooling under design-specific shrinkage restraint resulting from the interaction between the materials and the structure have often not been taken into consideration approperiately for weldability assessment of components. As compared to previous investigations using small specimens this report presents component weld tests under varying intensities of restraint. Online records of the reaction forces and moments demonstrate in which way the intensity of restraint affects the reaction stresses and moments and their meaning for the evaluation of the load level in welded components. T2 - EUROMAT Topical 2000 CY - Tours, France DA - 07.11.2000 PY - 2000 SN - 0-08-042815-0 VL - 1 SP - 145 EP - 150 PB - Elsevier CY - Amsterdam AN - OPUS4-11847 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böllinghaus, Thomas A1 - Kannengießer, Thomas A1 - Neuhaus, Mathias ED - Cerjak, H. ED - Bhadeshia, H. K. D. H. T1 - Effects of the structural restraint intensity on the stress strain build up in butt joints T2 - 7th International Seminar on Numerical Analysis of Weldability CY - Graz, Austria DA - 2003-09-29 PY - 2005 SN - 3-901351-99-X SP - 651 EP - 669 PB - Techn. Univ., TUG CY - Graz AN - OPUS4-11850 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neugebauer, Michael A1 - Zientek, Nicolai A1 - Maiwald, Michael ED - Udomkichdecha, W. ED - Böllinghaus, Thomas ED - Manonukul, A. ED - Lexow, J. T1 - Quantitative online NMR spectroscopy of technical mixtures: on the fly quantification of fluids N2 - In this paper quantitative NMR spectroscopy is demonstrated as a tool for process analytical technology (PAT) in order to obtain real time information from dynamic processes. Different methods for quantification are presented and as a result the limit of detection for NMR measurement could be determined to 3.3 mg kg-1 (ethanol in water). As model processes esterification reactions and dissolution of pharmaceutical formulations are presented and important process parameters are extracted. Furthermore it is demonstrated that not only 1H-NMR spectroscopy can be used for process monitoring but also 13C-NMR for technical mixtures. KW - NMR KW - Quantification KW - Online KW - Process analytical technology PY - 2014 UR - http://link.springer.com/chapter/10.1007/978-3-319-11340-1_15 SN - 978-3-319-11339-5 SN - 978-3-319-11340-1 SP - 151 EP - 160 PB - Springer AN - OPUS4-32584 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böllinghaus, Thomas A1 - Steppan, Enrico A1 - Mente, Tobias ED - Böllinghaus, Thomas ED - Lippold, J. C. ED - Cross, C. E. T1 - Hydrogen assisted cracking of a subsea-flowline N2 - Since the mid-nineties, supermartensitic stainless steels (SMSS) have increasingly been applied to welded subsea-pipeline systems in the North Sea oil and gas fields, especially to flowlines at mild sour service conditions. However, in 2001 cracking and leaks occurred during installation and service start-up of two SMSS flowlines in the Norwegian Tune gas condensate field, welded with a new developed matching filler wire. Brittle transgranular cracking started especially at inter-run lack of fusion and propagated brittle, predominantly through the weld metal. The present paper provides a brief overview of the original failure case and respective sequence of events leading to complete replacement of the SMSS by carbon steel flowlines in 2002. Then, detailed investigations of a circumferential weld sample of the failed Tune flowline are highlighted, targeted at comparison of the failure appearance to previous investigations of this filler material type and to search for possible explanations for the brittle fracture at the crack initiation area. SEM investigations of the fracture surface revealed brittle areas only in the direction towards the top side of the weld while the major part of the investigated surface exhibited ductile fracture. As an approach to clarify, if the fracture was a consequence of hydrogen assisted cracking, five small sized specimens have been cut out of the original sample. Cracking has been introduced parallel to the original fracture surface in these specimens at respective saw cuts and bending. The results show that brittle transgranular cracking appeared only in the specimen cooled down to very low temperatures by liquid nitrogen and in the sample charged with hydrogen to an average concentration of about 15 ml/100 g. However, a fracture similar to the original surface was observed only in the hydrogenized specimen. As a further result, very similar fracture surfaces of supermartensitic stainless steel weld metals had been observed on specimens subjected to hydrogen assisted cold cracking (HACC) as well as to hydrogen assisted stress corrosion cracking (HASCC). In total, the results indicate that brittle fracture starting at the inter-run lack of fusion were not initiated by high notch tip deformation rates, but rather influenced by hydrogen, probably taken up during welding. KW - supermartensitic stainless steel KW - hydrogen assisted cracking KW - fracture topography PY - 2016 UR - http://link.springer.com/chapter/10.1007/978-3-319-28434-7_17 UR - http://www.springer.com/us/book/9783319284323 SN - 978-3-319-28432-3 SN - 978-3-319-28434-7 DO - https://doi.org/10.1007/978-3-319-28434-7_17 SP - Part V, 361 EP - 379 PB - Springer International Publishing CY - Switzerland ET - 1 AN - OPUS4-35592 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Baer, Wolfram A1 - Eberle, Arno A1 - Klingbeil, Dietmar ED - Klingbeil, D. ED - Vormwald, M. ED - Eulitz, K.-G. T1 - The impact of ductile cast iron fracture behaviour on dynamic fracture mechanics R-curve testing using key curve methods N2 - Dynamic fracture mechanics characteristics are required for design and safety proof of advanced ductile cast iron (DCI) components. In this paper, the analytical compliance ratio (CR) and numerical finite element (FE) key curve methods were investigated for dynamic Rcurve testing. Two DCI materials, a purely ferritic and a ferritic one with 18 % of pearlite, were tested at room temperature (RT) and -40 °C. The special focus is on the impact of the materials damage and fracture behaviour on performance and limitations of the investigated methods. Systematic metallographic and fractographic microstructural analyses were performed accompanying the test program. Summarizing systematics of the specific damage behaviour and fracture mechanisms were developed taking microstructure, loading rate, specimen geometry and test temperature into account. There has been a change from ductile to brittle fracture mechanism observed at -40 °C with ferritic DCI and even at RT with ferritic-pearlitic DCI. The ferritic-pearlitic DCI did not show Rcurve behaviour at -40 °C and only single Juc values could be determined. Furthermore, with ferritic-pearlitic DCI, random pearlite shares in the ligament caused the relation between loading rate, force-deflection record and crack extension not to remain uniquely defined. Therefore, the FE key curve method proofed not to be applicable since the FE model was based on homogeneous isotropic material and ductile failure mode only. The analytical CR key curve method worked well only with selected combinations of microstructure, specimen geometry and temperature. In summary it has to be concluded that a robust, accurate and sufficiently simple dynamic key curve method that was suited for application in quality control of industrial relevant DCI qualities cannot be provided currently. T2 - 18th European conference on fracture (ECF 18) - Fracture of materials and structures from micro to macro scale CY - Dresden, Germany DA - 2010-08-30 KW - Damage and fracture behaviour KW - Ductile cast iron KW - Dynamic crack resistance curve KW - Key curve PY - 2010 SN - 978-3-00-031802-3 IS - Paper 160 SP - 1 EP - 8 AN - OPUS4-22273 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sievert, Rainer A1 - Fedelich, Bernard A1 - Günther, Burkhard A1 - Klingelhöffer, Hellmuth ED - Borsutzki, M. T1 - Zur Vorgehensweise bei der Bestimmung der Materialparameterwerte von inelastischen Verformungs- und Lebensdauer-Modellen für die Simulation des Materialverhaltens bei Hochtemperaturbeanspruchung N2 - Für viskoplastische Stoffgesetze wird das prinzipielle Verfahren der Identifikation von Materialmodell-Parametern für das Spannungs-Verformungs- und Versagens-Verhalten metallischer Werkstoffe am Beispiel von Hochtemperatur-Ermüdung aufgezeigt. Dies betrifft zum Einen die Verwendung geeigneter und auch möglichst weniger Experimente zur Hervorbringung der zu beschreibenden Phänomene des Werkstoffverhaltens und deren gezielte Auswertung sowie zum Anderen die physikalisch kontrollierte Führung einer numerischen Optimierung zur Ermittlung vertrauenswürdiger Materialparameterwerte. Diese Vorgehensweise wurde erfolgreich auf Warmarbeitsstähle sowie poly- und einkristalline Superlegierungen angewendet. T2 - Fortschritte der Kennwertermittlung für Forschung und Praxis CY - Bad Neuenahr, Deutschland DA - 2006-12-07 KW - Viskoplastische Materialmodelle KW - Lebensdauer-Regeln KW - Materialidentifikation PY - 2006 SN - 3-514-00734-9 SP - 121 EP - 126 PB - Stahleisen CY - Düsseldorf AN - OPUS4-14410 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Zimmer, Peter A1 - Kannengießer, Thomas A1 - Böllinghaus, Thomas T1 - Kaltrissprüfverfahren nach der DVS Richtlinie 1006 T2 - Schweißen und Schneiden 2005 CY - Essen, Deutschland DA - 2005-09-12 KW - Kaltriss KW - Kaltrissprüfung KW - DVS-Richtlinie 1006 PY - 2005 SN - 3-87155-695-5 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 237 SP - 275 EP - 280 PB - DVS-Verl. CY - Düsseldorf AN - OPUS4-11084 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kromm, Arne A1 - Kannengießer, Thomas ED - Carl E. Cross, ED - John C. Lippold, ED - Böllinghaus, Thomas ED - Herold, H. T1 - Influence of Local Weld Deformation on the Solidification Cracking Susceptibility of a Fully Austenitic Stainless Steel PY - 2008 SN - 978-3-540-78627-6 VL - II SP - 127 EP - 145 PB - Springer CY - Berlin AN - OPUS4-18642 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schwenk, Christopher ED - Böllinghaus, Thomas ED - Kitagawa, Masaki ED - Kishi, Teruo ED - Lexow, Jürgen T1 - Measurement and analysis of material properties needed for numerical welding simulation T2 - 1st World Materials Research Institutes Forum (WMRIF) - Workshop for young materials scientists CY - Tsukuba, Ibaraki, Japan DA - 2008-07-22 KW - Material Properties KW - Experimental Determination KW - Numerical Welding Simulation KW - Effects of Data Deviation PY - 2008 SN - 978-4-9900563-3-9 SP - XX-1 - XX-10 CY - Tsukuba, Ibaraki, Japan AN - OPUS4-17740 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stelling, Karen A1 - Lammers, Marco A1 - Meinel, Dietmar ED - Carl E. Cross, ED - John C. Lippold, ED - Böllinghaus, Thomas ED - Herold, H. T1 - Assessment of HAZ hot cracking in a high nitrogen stainless steel PY - 2008 SN - 978-3-540-78627-6 IS - Part IV SP - 349 EP - 369 PB - Springer CY - Berlin AN - OPUS4-18707 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Simone A1 - Hofmann-Böllinghaus, Anja A1 - Krause, Ulrich T1 - Chemical analysis of smoke of burning upholstered bus seats T2 - 11th International symposium on fire protection CY - Leipzig, Germany DA - 2010-06-08 KW - Upholstered seats KW - FTIR spectroscopy KW - Combustion KW - Smouldering KW - Fire behaviour PY - 2010 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. SP - 1 EP - 12(?) AN - OPUS4-21445 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kempel, Florian A1 - Schartel, Bernhard A1 - Hofmann-Böllinghaus, Anja A1 - Linteris, G.T. A1 - Lyon, R.E. A1 - Walters, R.N. A1 - Stoliarov, S.I. T1 - Numerical simulation of polymer materials in standard fire tests: Pyrolysis and the impact of residue formation T2 - Interflam 2010 - 12th International conference CY - Nottingham, UK DA - 2010-07-05 KW - Cone calorimeter KW - Poly(butylene terephtalate) PBT KW - FDS KW - ThermaKin PY - 2010 SN - 978-0-9541216-5-5 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. VL - 1 SP - 451 EP - 462 PB - Interscience Communications CY - London, UK AN - OPUS4-21668 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Askar, Enis A1 - Schröder, Volkmar A1 - Steinbach, J. ED - Suter, G. ED - de Rademaeker, E. T1 - Calculation of explosion regions of gas mixtures T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - Kohlenwasserstoffe KW - Instabile Gase KW - Ethylenoxid Inertisierung KW - Sicherheitstechnik KW - Explosionsgrenzen PY - 2010 SN - 978-90-76019-291 SP - 141 EP - 148 CY - Brugge, Belgium AN - OPUS4-21587 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mente, Tobias A1 - Böllinghaus, Thomas ED - Udomkichdecha, W. ED - Mononukul, A. ED - Böllinghaus, Thomas ED - Lexow, Jürgen T1 - Numerical investigations on hydrogen-assisted cracking (HAC) in duplex stainless steels N2 - Duplex stainless steels have been used for a long time in the offshore industry, since they have higher strength than conventional austenitic stainless steels and they exhibit a better ductility as well as an improved corrosion resistance in harsh environments compared to ferritic stainless steels. However, despite these good properties the literature shows some failure cases of duplex stainless steels in which hydrogen plays a crucial role for the cause of the damage. Numerical simulations can give a significant contribution in clarifying the damage mechanisms. Therefore, a numerical model of a duplex stainless steel microstructure was developed enabling simulation of crack initiation and propagation in both phases. The phase specific stress strain analysis revealed that local plastic deformation occurs in both austenite and δ-ferrite already in the macroscopically elastic range. Altogether, phase specific hydrogen-assisted material damage was simulated for the first time taking into account all main factors influencing hydrogen assisted cracking process. The results agree well with experimental observations and thus allow a better insight in the mechanism of hydrogen-assisted material damage. T2 - 4th WMRIF Young scientists workshop CY - Boulder, CO, USA DA - 2014-09-08 KW - Hydrogen-assisted cracking (HAC) KW - Numerical simulation KW - FEM KW - Duplex stainless steel (DSS) KW - Mesoscale model PY - 2016 SN - 978-981-287-723-9 SN - 978-981-287-724-6 DO - https://doi.org/10.1007/978-981-287-724-6_3 SP - 21 EP - 31 PB - Springer AN - OPUS4-35075 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fedelich, Bernard A1 - Affeldt, E. E. A1 - Harders, H. A1 - Marchal, N. A1 - Müller, F. A1 - Onofrio, G. A1 - Remy, L. A1 - Toulios, M. ED - Jaroslav Pokluda, ED - Petr Lukás, ED - Pavel Sandera, ED - Ivo Dlouhý, T1 - Experimental characterization of high temperature fatigue crack growth in a single crystal superalloy for gas turbine applications T2 - 17th European Conference on Fracture (ECF17) - Multilevel Approach to Fracture of Materials, Components and Structures CY - Brno, Czech Republic DA - 2008-09-02 KW - Single Crystal Superalloy KW - LCF KW - Crack Growth KW - Creep-Fatigue KW - Oxidation PY - 2008 SN - 978-80-214-3692-3 SP - 1336 EP - 1343 PB - VUTIUM Brno AN - OPUS4-18268 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brückner, Udo A1 - Epishin, Alexander A1 - Link, T. A1 - Fedelich, Bernard A1 - Portella, Pedro Dolabella ED - Denis, S. T1 - Dendritic stresses in Nickel-base superalloys T2 - 7th International Conference on Residual Stresses CY - Xi'an, China DA - 2004-06-14 KW - Single crystal KW - Superalloy KW - Dendritic structure KW - Residual stresses KW - X-ray diffraction KW - Nickelbasis-Superlegierung KW - Dendritisches Gefüge KW - Röntgenbeugung PY - 2005 SN - 0-87849-969-5 SN - 0255-5476 N1 - Serientitel: Materials science forum – Series title: Materials science forum IS - 490/491 SP - 497 EP - 502 PB - Trans Tech Publ. CY - Uetikon-Zürich AN - OPUS4-7148 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fedelich, Bernard A1 - Kiyak, Yusuf A1 - May, Thomas A1 - Pfennig, Anja ED - Gdoutos, E. T1 - Simulation of crack growth under low cycle fatigue at high temperature in a single crystal superalloy T2 - 16th European Conference of Fracture "Fracture of Nano and Engineering Materials and Structures" CY - Alexandroupolis, Greece DA - 2006-07-03 KW - Simulation KW - Experiment KW - Crack growth KW - Low cycle fatigue KW - High temperature KW - Single crystal KW - Superalloy KW - Oxidation PY - 2006 SN - 1-402-04971-4 IS - 900_tra SP - 8 pages PB - Springer CY - Dordrecht AN - OPUS4-12556 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Epishin, Alexander A1 - Link, T. A1 - Brückner, Udo A1 - Fedelich, Bernard A1 - Portella, Pedro Dolabella ED - Green, K. T1 - Effects of segregation in nickel-base superalloys: dendritic stresses T2 - Superalloys 2004 / 10th International Symposium on Superalloys 2004 CY - Seven Springs, PA, USA DA - 2004-09-19 KW - Nickel-base superalloys KW - Dendritic structure KW - Segregation KW - Residual stresses PY - 2004 SN - 0-87339-576-X SP - 537 EP - 543 PB - TMS CY - Warrendale AN - OPUS4-7150 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Epishin, Alexander A1 - Link, T. A1 - Klingelhöffer, Hellmuth A1 - Fedelich, Bernard A1 - Portella, Pedro Dolabella ED - S.R. Holdsworth, ED - I.A. Shibli, T1 - Creep damage mechanisms of single-crystal Nickel base superalloys T2 - 2nd ECCC Creep Conference CY - Zurich, Switzerland DA - 2009-04-21 KW - Creep damage KW - Nickel-base superalloys PY - 2009 SN - 978-1-60595-005-1 SP - 692 EP - 701 PB - DEStech Publications, Inc. AN - OPUS4-19448 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weltschev, Margit A1 - Bäßler, Ralph A1 - Werner, H. A1 - Alves, H. ED - Bernhard Fuchsbauer, ED - Wieland, Hans-Joachim T1 - Use of Corrosion-Resistant Higher-Alloyed Metallic Materials for the Transport of Dangerous Goods in Tanks T2 - 2nd Conference Steels in Cars and Trucks (SCT2008) "Future trends in steel development, processing technologies and applications" - Bringing the automotive, supplier and steel industries together CY - Wiesbaden, Germany DA - 2008-06-01 KW - BAM-List KW - Corrosion resistance KW - Dangerous goods KW - Superaustenitic steels KW - Nickel alloy PY - 2008 SN - 978-3-514-00755-0 SP - 53 EP - 62 PB - Verl. Stahleisen GmbH CY - Düsseldorf AN - OPUS4-17566 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sturm, Heinz A1 - Schulz, Eckhard A1 - Stark, Wolfgang A1 - Bovtun, V. A1 - Friedrich, Jörg Florian ED - Olefjord, I. ED - Nyborg, L. ED - Briggs, D. T1 - Techniques for surface composition analysis with scanning force microscopy (SFM) using electrical surface properties T2 - 7th European Conference on Applications of Surface and Interface Analysis CY - Göteborg, Sweden DA - 1997-06-16 PY - 1997 SN - 0-471-97827-2 SP - 579 EP - 582 PB - Wiley CY - Chichester AN - OPUS4-6854 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Chizhikova, N. P. A1 - Lessovaia, S. N. A1 - Gorbushina, Anna ED - Frank-Kamenetskaya, O. V. ED - Panova, E. G. ED - Vlasov, D. Y. T1 - Biogenic weathering of mineral substrates (Review) N2 - A biological impact on weathering was recognized already at the beginning of the twentieth century, when biochemical influence of the lichen growth on rocks was convincingly demonstrated. Later it was shown that the progress of solid rock weathering initiated by biological colonization was affected by the initial porosity system and sensitivity of mineral association. In the meantime a considerable amount of diverse scientific data confirm the importance of biological rock colonizers (lichens and free-living rock biofilms) in mineral material dynamics as they occur at the atmosphere-exposed rock surfaces on local as well as global scale. Subaerial rock biofilms—microbial ecosystem including free-living heterotrophic and phototrophic settlers of bare rock surfaces—are characteristic for the first stage of primary succession of terrestrial ecosystems on mineral substrates. These cultivable and free-living communities are dominated by fungi and set the stage for the later development of a lichen cover, but in comparison to lichens also represent a new tool for laboratory experimentation and thus open a new stage of work in geomicrobiology. The Minerals sensitivity to microbially induced biological weathering can be demonstrated by studies of natural samples as well as by the laboratory mesocosm experiments. KW - Liches KW - Biofilms KW - Minerals KW - Transformations PY - 2016 SN - 9783319249872 SN - 9783319249858 DO - https://doi.org/10.1007/978-3-319-24987-2_2 SN - 2193-8571 SP - Part I, 7 EP - 14 PB - Springer International Publishing AN - OPUS4-35677 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bäßler, Ralph A1 - Weltschev, Margit ED - Wieland, H.-J. ED - Brockmann, S. T1 - Duplex steel's corrosion resistance compared to the austenite containing molybdenum KW - Duplexsteel KW - Dangerous goods PY - 2014 SN - 978-3-514-00813-7 SP - 316 EP - 323 PB - Verl. Stahleisen GmbH CY - Düsseldorf AN - OPUS4-31035 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Adam, Christian A1 - Krüger, Oliver ED - Thomé-Kozmiensky, K.J. ED - Beckmann, M. T1 - Wertstoffpotential in deutschen Klärschlammaschen N2 - Weltweit fallen in den entwickelten Märkten jährlich etwa 30 Mio. t (Trockenmasse) Klärschlamm an, davon 10 Mio. t in Europa und etwa 2 Mio. t in Deutschland. Etwas mehr als die Hälfte des in Deutschland anfallenden Klärschlamms wird thermisch verwertet und etwa 44 % der thermischen Verwertung wird in Monoverbrennungsanlagen durchgeführt. Die aus der Monoverbrennung resultierende Klärschlammasche, insbesondere aus dem kommunalen Bereich, enthält im Durchschnitt 6 % Phosphor, welcher grundsätzlich zurückgewonnen und der landwirtschaftlichen Nahrungsmittelproduktion zugeführt werden könnte. Dies ist insbesondere im Hinblick auf die sich in Zukunft vermutlich verschärfende Versorgungslage des Phosphors interessant. Im Zuge einer Phosphorrückgewinnung könnten darüber hinaus weitere Technologiemetalle aus Klär schlamm bzw. Klärschlammaschen zurückgewonnen werden. Um das Wertstoffpotential deutscher Klärschlammaschen und die Wirtschaftlichkeit möglicher Rückgewinnungsverfahren bewerten zu können, müssen Wertstoffgehalte, Massenströme sowie mögliche saisonale Schwankungen möglichst genau bestimmt werden. Dazu führt die BAM im Auftrag des Umweltbundesamtes ein Forschungsprogramm zum Monitoring deutscher Klärschlammaschen durch (UFOPLAN 2011; FKZ 3711 33 321; Finanzierung durch Bundesmittel). Neben ersten Ergebnissen dieses Projekts geben wir einen Überblick über nasschemische und thermochemische Verfahren zur Phosphorrückgewinnung aus Klärschlammaschen. KW - Klärschlammasche KW - Ressourcen KW - Wertstoffpotential KW - Phosphorrückgewinnung PY - 2013 SN - 978-3-935317-92-4 VL - 10 SP - 997 EP - 1014 PB - TK Verlag Karl Thomé-Kozmiensky CY - Neuruppin AN - OPUS4-27683 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gorbushina, Anna A1 - Kacunko, S. A1 - Kacunko, S. ED - Gethmann, D. ED - Wagner, A. T1 - Luftstaub über den Meeren - Wie historische Staubproben Wissenschaftler und Künstler inspirieren N2 - Schon erfahrenen Seemännern waren die Staubstürme bekannt, die zwischen den Kontinenten westwärts von Afrika über den Atlantik zogen? Doch war es Charles Darwin, der diese Phänomene erstmals in seinen wissenschaftlichen Aufzeichnungen belegte. PY - 2013 SN - 978-3-643-50491-3 N1 - Serientitel: Schnittstellen. Wissenschaft und Kunst im Dialog – Series title: Schnittstellen. Wissenschaft und Kunst im Dialog VL - 2 SP - 151 EP - 160 PB - LIT Verlag CY - Wien, Münster AN - OPUS4-28934 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sturm, Heinz A1 - Stark, Wolfgang A1 - Bovtun, V. A1 - Schulz, Eckhard ED - Xia, Z. T1 - Methods for simultaneous measurements of topography and local electrical properties using scanning force microscopy N2 - Two different approaches to investigate the local complex conductivity and the surface charge with Scanning Force Microscopy (SFM) techniques are presented. It is shown that the measurement of local electrical properties with SFM leads to interesting information about the composition of electrically heterogeneous surfaces T2 - 9th International Symposium on Electrets (ISE 9) CY - Shanghai, China DA - 1996-09-25 PY - 1996 SN - 0-7803-2695-4 DO - https://doi.org/10.1109/ISE.1996.578073 SP - 223 EP - 228 PB - IEEE Service Center CY - Piscataway, NJ AN - OPUS4-6851 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Munikoti, Vijayendra K. A1 - Brekow, Gerhard A1 - Tessaro, Ute A1 - Erhard, Anton T1 - Ultrasonic inspection for transverse defects in dissimilar metal welds N2 - As a part ofthe cooling circuit in many nuclear power installations, dissimilar metals are welded together - for example, weid overlay cladding of austenitic material (either Inconel or 1.4550) on low alloy Steel. These welds are prone to stress corrosion Cracking. In some ofthe nuclear power stations, cracks were detected on the inner surface of the dissimilar weid. These cracks, which have their Orientation perpendicular to the weiding direction, are designated as transverse cracks. The purpose of the present investigation is to develop an ultrasonic testing method for reliable detection ofsuch transverse cracks. Very offen, crack detection and sizing in dissimilar welds with ultrasound can be very difficult due to the following reasons: 1. In a weiding process, high thermal gradients exist between the molten weid pool and the neighbouring colder regions. During the solidification process, grains grow along the direction of heat flow, yielding a textured structure. This results in a microstructure consisting of elongated grains, which causes the anisotropic nature of the weid region. An elastic wave in such an anisotropic medium undergoes beam skewing (i.e. phase and group velocity (Energy flow) directions are no longer coincident). 2. Due to the above mentioned grain structure, elastic properties vary spatially. This amounts to an ultrasonic wave undergoing multiple reflections at grain boundaries. The ray direction gets successively skewed at each grain boundary, resulting in a curved path. In addition to the grain boundaries, there are also interfaces between different parts ofthe dissimilar weid such as parent metal, transition layer, cladding and weid. At these interfaces, reflections and mode conversions occur in addition to scattering at grain boundaries. Altogether, ultrasonic inspection ofdissimilar welds for defect detection and sizing poses major challenges. Presently international research activities are concerned with the development of improved Signal Processing methods and optimizing strategies for qualifying ultrasonic inspection techniques for dissimilar welds. PY - 2012 SN - 978-3-87155-608-1 SN - 1618-4513 VL - 4 SP - 153 EP - 161 PB - DVS Media GmbH CY - Düsseldorf AN - OPUS4-26829 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Temperature related effects on self-consolidating concrete due to interactions between superplasticizers, supplemental admixtures and additions T2 - 9th ACI International conference on superplasticizers and other chemical admixtures in concrete CY - Seville, Spain DA - 2009-10-12 KW - Polycarboxylate KW - Modified starch KW - Rheology KW - Self-compacting concrete KW - Temperature KW - Setting KW - Shrinkage KW - Heat evolution PY - 2009 SN - 978-0-9731507-8-0 SP - 135 EP - 147 AN - OPUS4-20884 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Wolfram A1 - Brouwers, J. A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Khayat, K. H. ED - Feys, D. T1 - Effects of superplasticizer and viscosity-modifying agent on fresh concrete performance of SCC at varied ambient temperatures N2 - Varying ambient temperatures in plants or on construction sites during casting of SCC can cause serious problems affecting the fresh concrete performances, such as rheological properties and setting time, with consequences for the hardened properties in the structure. By sensible choices of the components, the robustness of SCC mixtures against temperature variations can be improved. However, this aspect has not been the focus of intensive research yet. In this study the effects of varied ambient temperatures on the early performance of differently composed SCC mixtures are investigated, with emphasis on changes in rheology, early deformations, heat evolution and setting. Focus is placed on the study of the influence of the polycarboxylate ether molecule type as well as different viscositymodifying agents on the temperature robustness. Effects on the relevance for practical concrete applications are evaluated, which will provide a reliable framework of possible actions on the appropriate use of admixtures for SCC. T2 - SCC 2010 - 6th International RILEM Symposium on self-compacting concrete / 4th North American conference on the design and use of SCC - Desgin, Production and Placement of self-consolidating concrete CY - Montreal, Canada DA - 2010-09-26 KW - Polycarboxylate KW - Modified starch KW - Rheology KW - Self-compacting concrete KW - Temperature KW - Yield stress KW - Viscosity PY - 2010 SN - 978-90-481-9663-0 DO - https://doi.org/10.1007/978-90-481-9664-7_6 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 1 IS - 2 SP - 65 EP - 77 PB - Springer AN - OPUS4-22126 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sturm, Heinz ED - Czichos, Horst ED - Habig, K.-H. T1 - Messtechnik der Mikro- und Nanoskala PY - 2010 SN - 978-3-8348-1810-2 SP - 1 EP - 18 PB - Springer-Vieweg CY - Wiesbaden AN - OPUS4-21576 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Adam, Christian T1 - Eine nachhaltige Strategie zur Nutzung des Phosphors im Klärschlamm - Ergebnisse aus dem EU-Projekt SUSAN T2 - Internationales Klärschlamm-Symposium - Wege zu einer verantwortungsvollen Klärschlammentsorgung CY - Fürstenfeld, Bayern, Deutschland DA - 2008-06-30 PY - 2008 SN - 978-3-8356-3162-5 SP - 131 EP - 140 CY - München AN - OPUS4-17696 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Braun, Ulrike A1 - Sturm, Heinz A1 - Schartel, Bernhard T1 - Flame retardancy mechanisms of aluminium phosphinate in glass-fibre reinforced polyester T2 - Flame Retardants 2008 Conference CY - London, UK DA - 2008-02-12 PY - 2008 SN - 978-0-9556548-1-7 SP - 133 EP - 140 PB - Interscience Communications CY - London, UK AN - OPUS4-17785 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bovtun, V. A1 - Sturm, Heinz A1 - Pashkov, V.M. ED - Baptista, J. T1 - Investigation of local electrical properties and topography of homo- and heterogeneous TiO2-containing ceramics by scanning force microscopy (SFM) T2 - 5th International Conference on Electronic Ceramics & Applications CY - Aveiro, Portugal DA - 1996-09-02 KW - Ceramics KW - Scanning force microscopy KW - SFM KW - Electrical properties KW - Heterogeneity PY - 1996 SN - 972-828317-2 VL - 2 SP - 117 EP - 120 PB - Fundação João Jacinto de Magalhães CY - Aveiro AN - OPUS4-6850 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schoknecht, Ute A1 - Plarre, Rüdiger A1 - Stephan, Ina ED - Lang, A. ED - Zimmer, J. T1 - Einführung in die biologische Wirksamkeitsprüfung von Bioziden im Materialschutz KW - Biozide KW - Materialschutz KW - Wirksamkeitsprüfung KW - Biocide KW - Material preservation KW - Efficiency test PY - 2015 SN - 9783861021940 SP - 48 EP - 50 PB - Deutsches Historisches Museum CY - Berlin AN - OPUS4-35411 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stephan, Ina A1 - Grinda, Manfred ED - Czichos, Horst ED - Tetsuya Saito, ED - Leslie Smith, T1 - Biological testing of wood KW - Fungi KW - Rot KW - Decay KW - Microorganism KW - Wood KW - Testing PY - 2006 SN - 978-3-540-20785-6 SP - 716 EP - 723 PB - Springer CY - Berlin AN - OPUS4-14396 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kley, Gerd A1 - Adam, Christian A1 - Brenneis, Rudolf A1 - Simon, Franz-Georg T1 - Thermochemische Aufbereitung von Klärschlammaschen zu Phosphordüngern - Das EU-Projekt SUSAN T2 - 75. Darmstädter Seminar "Abwassertechnik" CY - Darmstadt, Deutschland DA - 2005-11-12 KW - Phosphor KW - Ressourcenschutz KW - Thermochemische Behandlung KW - Chlorierung KW - Düngemittel KW - Stofftrennung KW - Klärschlamm KW - Mono-Verbrennung PY - 2005 SN - 3-932518-63-2 N1 - Serientitel: Schriftenreihe WAR – Series title: Schriftenreihe WAR IS - 167 SP - 265 EP - 285 PB - Inst. WAR CY - Darmstadt AN - OPUS4-11683 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hedrich, Martina A1 - Giese, Lutz A1 - Adam, Christian A1 - Haase, Oskar A1 - Segebade, Christian T1 - Recycling of Photovoltaic CdTe-Modules - Analytical Process Monitoring N2 - Along with the globally increasing energy demand the application of renewable energy sources is urgently required. According to national regulations and international treaties (e.g. Kyoto Protocol) these sources shall be sustainably available at reasonable financial effort and non-polluting during production, use and waste treatment. Using photovoltaic sources (PV), these requirements can clearly be met. All industry has to follow the best available technology and an integrative life cycle approach for their products and production. PV thin film technology strictly responds to this obligation. In order to save material resources and to minimise undesirable landfill recycling of spent PV modules is necessary. Recycling of multi-component materials containing mixed metals typically consists of three parts: liberation, separation, and recovery. In our study (RESOLVED – an EU Demonstration Project) the focus is on liberation and separation. The converting layer (CdTe) was liberated (removed) from the glass carrier by sandblasting and separated subsequently from the blast material (e.g. corundum) and other components using stepwise different separation techniques. Both the glass substrate and CdTe are subject to re-use. The overall feasibility of the recycling process is primarily governed by the efficiency of the procedure applied to the separation of CdTe from the rest (blasting material, glass residues, etc.). This was performed by water-based flotation. Several flotation procedures were studied regarding their separation yields. The distribution of CdTe in the phases involved (flotate, water, residue) was measured using energy dispersive X-ray fluorescence spectrometry (EDXRS) intended for future routine application and by instrumental large-volume photon activation analysis (IPAA) as a reference procedure. The results of both analytical methods were in satisfactory agreement. T2 - European Metallurgical Conference (EMC 2005) CY - Dresden, Germany DA - 2005-09-18 KW - Photovoltaic (PV) KW - Solar energy KW - CdTe-Modules KW - Recycling KW - Separation techniques KW - Monitoring PY - 2005 SN - 3-935797-22-2 VL - 4 SP - 1687 EP - 1696 PB - GDMB-Medienverl. CY - Clausthal-Zellerfeld AN - OPUS4-11004 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Munz, Martin A1 - Chung, Jae Un A1 - Eltanany, Gehan A1 - Sturm, Heinz A1 - Schulz, Eckhard ED - Degischer, H.-P. T1 - Interphasial stiffness gradients in polymer materials T2 - Symposium Verbundwerkstoffe und Werkstoffverbunde CY - Wien, Österreich DA - 2003-07-02 PY - 2003 SN - 3-527-30762-1 PB - Wiley-VCH CY - Weinheim AN - OPUS4-2525 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Barkeshli, M. A1 - Stephan, Ina ED - Barkeshli, M. ED - Arya, A. ED - Nath, V. ED - Abduraheem, K. T1 - Sizing materials used in Persian manuscripts and their behaviour against the mould fungus Aspergillus flavus N2 - Our earlier study based on historical and scientific analysis showed that Iranians used a considerable range of materials in the sizing process. Unlike many nations who used limited sizing materials to improve the mechanical strength and to smoothen the paper surface, Iranians have used various materials for sizing process from Taimurid (15th century) to Safawid (16th century) and Qajar (19th century) periods. Further to our earlier study on the Sizing Materials used in Persian manuscripts and miniature paintings, scientific analysis was carried out to investigate their behaviour against the mould fungus Aspergillus flavus. In the first stage fourteen different sizing materials that was identified from Persian historical recipes were reconstructed. In the second stage fungicidal property of each sizing samples against Aspergillus flavus fungus were identified that will be presented in this paper. KW - Sizing KW - Materials KW - Persian manuscripts KW - Deterioration KW - Fungus KW - Aspergillus flavus PY - 2023 SN - 978-93-5461-714-0 SP - 3 EP - 20 PB - Daya Publishing House CY - New Delhi AN - OPUS4-58102 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Mix, Renate A1 - Wettmarshausen, Sascha A1 - Sturm, Heinz ED - Tachibana, K. ED - Takai, O. T1 - A new concept of adhesion promotion in metal-polymer composites by introduction of covalently bonded hydrophobic spacers at interface T2 - Proceedings of the 18th International Symposium on Plasma Chemistry (ISPC-18) CY - Kyoto, Japan DA - 2007-08-26 PY - 2007 SN - 978-4-9903773-4-2 SP - 27A EP - p5, 1 PB - International Union of Pure and Applied Chemistry CY - Kyoto AN - OPUS4-20668 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stephan, Ina T1 - Biodeterioration and testing of wood/plastic composites T2 - Biocides in Plastics 2008 Conference CY - Brussels, Belgium DA - 2008-02-26 KW - Biocide KW - WPC KW - Plastic KW - Deterioration KW - Fungus KW - Moulds KW - Termites KW - Algae PY - 2008 SN - 978-1-84735-067-1 IS - 8 SP - 1 EP - 12 PB - Smithers Rapra CY - Shawbury AN - OPUS4-16719 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Adam, Christian A1 - Peplinski, Burkhard A1 - Kley, Gerd A1 - Simon, Franz-Georg ED - Hilty, L. M. T1 - Thermo-chemical treatment of sewage sludge ashes aiming at marketable P-fertiliser products T2 - R'07 World Congress "Recovery of Materials and Energy for Resource Efficiency" CY - Davos, Switzerland DA - 2007-09-03 KW - P-recovery KW - Sewage sludge KW - Thermo-chemical treatment KW - Mineral phases KW - XRD PY - 2007 SN - 978-3-905594-49-2 SP - 14/1 EP - 14/7 PB - EMPA CY - Davos AN - OPUS4-16469 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Munz, Martin A1 - Cappella, Brunero A1 - Sturm, Heinz A1 - Geuss, Markus A1 - Schulz, Eckhard T1 - Materials contrasts and nanolithography techniques in scanning force microscopy (SFM) and their application to polymers and polymer composites N2 - Beyond measuring the topography of surfaces, scanning force microscopy (SFM) has proved to be valuable both for mapping of various materials properties and for modifying surfaces via lithography techniques. Thus, SFM has gained relevance as a surface analysis technique as well as a tool for nanoscale engineering purposes. Different kinds of tip-sample interactions are exploitable, e.g. mechanical, thermal and electrical ones. Owing to its versatility, SFM has found plenty of applications in polymer science. Among others, the examples reported on in this review article encompass issues related to commodity polymers, various polymer-based composites, polymer blends, or ferroelectric polymers. For instance, stiffness imaging is elucidated as a technique for detecting interphases occurring in composites with inorganic fillers. The described applications are mainly related to mechanical and electrical tip-sample interactions. The respective fundamentals are outlined as well as some aspects of the measurement of materials contrasts. The presented techniques of nano-scale modification are a dynamical sort of plowing lithography and electrical poling, both performed by means of SFM-probes. KW - Local electrical-properties KW - Probing micromechanical properties KW - Spreading resistance microscopy KW - Modulated friction techniques KW - Nanometer-scale modification KW - Ferroelectric domain-walls KW - Interfacial shear-strength KW - Self-assembled monolayers KW - Maxwell-stress microscopy KW - Solid-liquid interfaces KW - Contact mechanics KW - Electrical properties KW - Interface/interphase KW - Nanolithography KW - Polymer-matrix composites (PMC) scanning/atomic force KW - Microscopy (SFM/AFM) thermal diffusivity PY - 2003 SN - 3-540-00530-7 DO - https://doi.org/10.1007/b11055 SN - 0065-3195 SN - 1436-5030 N1 - Serientitel: Advances in polymer science – Series title: Advances in polymer science IS - 164 SP - 87 EP - 210 PB - Springer CY - Berlin AN - OPUS4-2892 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sturm, Heinz A1 - Rubahn, H.-G. ED - Katharina Al-Shamery, ED - Horst-Günter Rubahn, ED - Sitter, Helmut T1 - Device Treatment of Organic Nanofibers: Embedding, Detaching, and Cutting KW - Organic nanofibers KW - Polymer embedding KW - Safety KW - Security KW - Photobleaching KW - Para-sexy-phenylene PY - 2008 SN - 978-3-540-71922-9 SN - 0933-033X VL - 101 SP - 325 EP - 346 PB - Springer AN - OPUS4-16652 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Adam, Christian A1 - Vogel, Christian T1 - Technische Möglichkeiten der Phosphorrückgewinnung aus Klärschlammaschen T2 - VDI-Fachkonferenz "Klärschlammbehandlung - Technologien, Wertstoffrückgewinnung, Entwicklungen" CY - Offenbach, Deutschland DA - 2010-10-27 KW - Klärschlammasche KW - Phosphor KW - Rückgewinnung PY - 2010 SN - 978-3-9813793-2-7 SP - 217 EP - 228 CY - Düsseldorf AN - OPUS4-22338 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hübert, Thomas A1 - Tiebe, Carlo A1 - Stephan, Ina A1 - Miessner, H. A1 - Koch, B. T1 - Detection of mould in indoor environments using a mini ion-mobility spectrometer system T2 - EUROSENSORS XXII CY - Dresden, Germany DA - 2008-10-07 KW - Mould detection KW - Fungus KW - Indoor air quality KW - MVOC KW - Biochemical sensor system KW - Ion-mobility spectrometry PY - 2008 SN - 978-3-00-025217-4 SP - 300 EP - 303 AN - OPUS4-18186 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stephan, Ina A1 - Askew, P. ED - Otto, H.-D. T1 - Mikrobiologische Prüfungen an Beschichtungsstoffen und Beschichtungen KW - Oberflächen KW - Beschichtung KW - Beschichtungsstoffe KW - Pilze KW - Algen KW - Bakterien KW - Mikrobiologie KW - Topfkonservierung KW - Filmkonservierung PY - 2006 SN - 3-7776-1121-2 VL - 10 IS - Abschnitt 10.2.6.6 SP - 494 EP - 507 PB - Hirzel CY - Stuttgart ET - 2., völlig neu bearb. und erw. AN - OPUS4-14395 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Adam, Christian A1 - Vogel, Christian A1 - Wellendorf, Stephan A1 - Schick, J. A1 - Kratz, S. A1 - Schnug, E. ED - Ashley, K. ED - Mavinic, D. ED - Koch, F. T1 - Phosphorus recovery by thermochemical treatment of sewage sludge ash - Results of the European FP6-project SUSAN T2 - International conference on nutrient recovery from wastewater streams CY - Vancouver, BC, Canada DA - 2009-05-10 PY - 2009 SN - 9781843392323 SP - 417 EP - 430 PB - IWA Publishing CY - London, UK AN - OPUS4-19485 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gorbushina, Anna ED - Ziegahn, K.-F. T1 - Idealbiofilm als neues Testsystem: Laborsimulation von Umwelteinflüssen und biologischer Einwirkung auf Materialien T2 - 39. Jahrestagung der GUS 2010 - Umweltflüsse erfassen, simulieren, bewerten CY - Stutensee, Deutschland DA - 2010-03-17 KW - Materialschäden KW - Mikrobielle Vergesellschaftungen KW - Pilze KW - Cyanobakterien PY - 2010 SN - 978-3-9813136-0-4 SP - 197 EP - 207 PB - DWS Werbeagentur und Verlag GmbH CY - Pfinztal AN - OPUS4-21109 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Torge, Manfred A1 - Adam, Karin A1 - Feldmann, Ines T1 - Naturwissenschaftliche Untersuchungen an Glasproben aus den mittelalterlichen Glasfenstern der St. Marienkirche in Frankfurt (Oder) KW - Glasmalerei KW - Glasanalysen PY - 2008 SN - 978-3-88462-272-8 SP - 208 EP - 211 PB - Wernersche Verlagsgesellschaft CY - Frankfurt (Oder) AN - OPUS4-17902 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stephan, Ina A1 - Askew, P. A1 - Gorbushina, Anna A1 - Grinda, Manfred A1 - Hertel, Horst A1 - Krumbein, W.E. A1 - Müller, R.-J. A1 - Pantke, Michael A1 - Plarre, Rüdiger A1 - Schmitt, G. A1 - Schwibbert, Karin ED - Czichos, Horst ED - Saito, T. ED - Smith, L. T1 - Biogenic impact on materials N2 - Materials as constituents of products or components of technical systems rarely exist in isolation and many must cope with exposure in the natural world. This chapter describes methods that simulate how a material is influenced through contact with living systems such as microorganisms and arthropods. Both unwanted and desirable interactions are considered. This biogenic impact on materials is intimately associated with the environment to which the material is exposed (Materials-Environment Interaction, Chap. 15). Factors such as moisture, temperature and availability of food sources all have a significant influence on biological systems. Corrosion (Chap. 12) and wear (Chap. 13) can also be induced or enhanced in the presence of microorganisms. Section 14.1 introduces the categories between desired (biodegradation) and undesired (biodeterioration) biological effects on materials. It also introduces the role of biocides for the protection of materials. Section 14.2 describes the testing of wood as a building material especially against microorganisms and insects. Section 14.3 characterizes the test methodologies for two other groups of organic materials, namely polymers (Sect. 14.3.1) and paper and textiles (Sect. 14.3.2). Section 14.4 deals with the susceptibility of inorganic materials such as metals (Sect. 14.4.1), concrete (Sect. 14.4.2) and ceramics (Sect. 14.4.3) to biogenic impact. Section 14.5 treats the testing methodology concerned with the performance of coatings and coating materials. In many of these tests specific strains of organisms are employed. It is vital that these strains retain their ability to utilize/attack the substrate from which they were isolated, even when kept for many years in the laboratory. Section 14.6 therefore considers the importance of maintaining robust and representative test organisms that are as capable of utilizing a substrate as their counterparts in nature such that realistic predictions of performance can be made. KW - Materialschutz KW - Biologie KW - Organismus KW - Standard KW - Prüfung PY - 2011 SN - 978-3-642-16640-2 SP - 769 EP - 844 PB - Springer CY - Berlin, Heidelberg AN - OPUS4-24210 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stephan, Ina T1 - Biocides in synthetic materials: what do they need to do? N2 - Biocides are used in a wide range of materials of both synthetic as well as natural origin. Natural materials such as wood or wool often have very limited natural durability and environmental processes degrade and recycle the material by physical, chemical and biological means. However, mankind often aims to prolong the service life of these products especially when value has been added by using these materials e.g. for building purposes or clothing. The use of biocides is often welcomed when other means to protect a natural material (e.g. keep it dry, out of reach for insects) cannot be achieved. T2 - 2nd International Conference - Biocides in synthetic materials 2010 CY - Berlin, Germany DA - 2010-09-28 KW - Biozid KW - Kunststoffe KW - Konservierung KW - Desinfektion KW - Biocide KW - Synthetic materials KW - Preservation KW - Disinfection KW - Treated articles PY - 2010 SN - 978-1-84735-554-6 IS - Session 1 / Paper 1 SP - 1 EP - 7 AN - OPUS4-22015 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sturm, Heinz A1 - Geuss, Markus A1 - Schulz, Eckhard ED - Konsta, A. T1 - Scanning force microscopy investigations on electroactive polymer films N2 - The authors present investigations on a PVDF (polyvinylidenefluoride) film supplied with top and bottom Au electrodes, which is analysed using a SFM and a contactless optical sensor to measure the sample strain with respect to applied fields. T2 - 10th IEEE International Symposium on Electrets (ISE) CY - Delphi, Greece DA - 1999-09-22 PY - 1999 SN - 0-7803-5025-1 DO - https://doi.org/10.1109/ISE.1999.832086 SP - 465 EP - 468 PB - IEEE Operations Center CY - Piscataway, NJ AN - OPUS4-6862 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Adam, Christian A1 - Adamczyk, Burkart A1 - Weimann, Karin ED - White, T. ED - Ferraris, C. ED - Yu, L. ED - Halada, K. ED - Umezawa, O. T1 - Recovery of non-renewable resources from waste T2 - 7th International Conference on Ecomaterials (ICEM7); 3rd International Conference on Advanced Materials (ICMAT2005) CY - Singapore DA - 2005-07-03 PY - 2005 SN - 981-05-3611-9 VL - 1 SP - 148 EP - 155 PB - Stallion Press CY - Singapore AN - OPUS4-11831 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kramer, A. A1 - Nies, Daniel A1 - Pulz, Robert A1 - Rehmer, Birgit A1 - Stephan, Ina A1 - Maierhofer, Christiane ED - Mazal, Pavel T1 - Laser induced active thermography for the visualization of transport processes in building materials T2 - 5th International workshop of NDT experts - NDT in progress 2009 CY - Prague, Czech Republic DA - 2009-10-12 KW - Active thermography KW - Laser KW - Local thermal excitation KW - Thermal transport KW - Water transport KW - Wood preservatives PY - 2009 SN - 978-80-214-3968-9 SP - 153 EP - 162 AN - OPUS4-20337 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Adam, Christian A1 - Brenneis, Rudolf A1 - Simon, Franz-Georg ED - Martin Faulstich, ED - Peter Quicker, T1 - Ascheentsorgung - Acker oder Deponie? T2 - 4. Fachtagung "Verfahren & Werkstoffe für die Energietechnik - Biomasse & Abfall - Regionale Brennstoffe richtig nutzen" CY - Sulzbach-Rosenberg DA - 2008-06-11 PY - 2008 SN - 978-3-9810391-3-9 N1 - Serientitel: Verfahren & Werkstoffe für die Energietechnik – Series title: Verfahren & Werkstoffe für die Energietechnik IS - 4 SP - 227 EP - 243 PB - DORNER PrintConcept GmbH + Co. KG CY - Sulzbach-Rosenberg AN - OPUS4-17609 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klobes, Peter A1 - Rübner, Katrin A1 - Hempel, S. A1 - Prinz, Carsten ED - S. Kaskel, ED - P. Llewellyn, ED - F. Rodríguez-Reinoso, ED - N.A. Seaton, T1 - Investigation of the microstructure of ultra high performance concrete T2 - 8th International symposium on the characterisation of porous solids CY - Edinburgh, UK DA - 2008-06-10 PY - 2009 SN - 978-1-84755-904-3 IS - Special Publication No. 318 SP - 354 EP - 361 PB - RSC AN - OPUS4-19401 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Goebbels, Jürgen A1 - Beck, Matthias A1 - Isecke, Bernd A1 - Burkert, Andreas A1 - Bäßler, Ralph ED - Castro-Borges, P. ED - Moreno, E.I. ED - Sakai, K. ED - Gjorv, O.E. ED - Banthia, N. T1 - Self-corrosion of steel in concrete by electrochemical measurements and X-ray tomography T2 - CONSEC`10 - 6th International conference on concrete under severe conditions CY - Mérida, Yucatán, Mexico DA - 2010-06-07 KW - Self-corrosion KW - Steel KW - Concrete KW - X-ray tomography PY - 2010 SN - 978-0-415-59316-8 VL - 2 SP - 1221 EP - 1228 PB - Taylor & Francis CY - London, UK AN - OPUS4-22299 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Torge, Manfred A1 - Krug, Sonja A1 - Bücker, Michael A1 - Feldmann, Ines A1 - Scharf, Holger A1 - Witthuhn, Heike A1 - Sander, C. A1 - Fraenkler-Balhorn, K. ED - Roemich, H. T1 - Mercury emissions from historical tin amalgam mirrors T2 - Interim Meeting of the ICOM-CC Working Group - Glass & Ceramics Conservation CY - Corning, New York, USA DA - 2010-10-03 KW - Mirrors KW - Mercury KW - Tin amalgam KW - Deterioration PY - 2010 SN - 978-0-87290-182-7 SP - 156 EP - 163 AN - OPUS4-22175 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Torge, Manfred A1 - Sabel, Martin A1 - Feldmann, Ines A1 - Kohl, Anka T1 - Naturwissenschaftliche Untersuchungen im Rahmen des Projektes 'Konservierung mittelalterlicher Glasmalerei im Kontext spezieller materieller und umweltbedingter Gegebenheiten' N2 - Nachsicherung geschädigter Zaponlack-Wachs-Sicherungen an den um 1410/20 entstandenen Glasmalereien des Helenafensters nord VIII am Erfurter Dom - Untersuchungen zu Schadensursachen, Schadensphänomenen, Methoden der Nachbehandlung und des Monitorings KW - Glasmalerei KW - Restaurierung KW - Zaponlack PY - 2011 SN - 978-3-8167-8470-8 VL - D 1012 SP - 36 EP - 75 PB - Fraunhofer IRB Verl. CY - Stuttgart AN - OPUS4-23631 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Yevtushenko, Oleksandra A1 - Bäßler, Ralph ED - Lexow, J. ED - Kishi, T. ED - Kitagawa, M. ED - Böllinghaus, Thomas T1 - Electrochemical studies on pitting corrosion on Cr13 steel exposed to CO2 and artificial brine with high chloride concentration N2 - Within the project COORAL (German acronym for 'CO2 purity for capture and storage') first studies on piping steels exposed to CO2 and artificial brine with high chloride concentration have been carried out. Corrosion behavior of martensitic Cr13 steel (1.4034) was investigated in a corrosive environment (artificial saline brine, T = 60 °C, CO2-flow rate 3 – 5 L/h, atmospheric pressure, exposure times from 1 h up to 14 days) using electrochemical and metallographic techniques. Different corrosion kinetics were observed as a function of exposure times and chloride concentration in the artificial brine. In CO2-saturated brine pitting corrosion was observed at free corrosion potential, whereas in the brine without addition of NaCl a stable passive layer built up. Predictions about corrosion mechanism are made and verified by means of surface analytical techniques. KW - Stainless steel KW - Pitting corrosion KW - Electrochemistry KW - Carbon dioxide PY - 2012 SN - 978-3-642-23347-0 SN - 978-3-642-23348-7 SP - 45 EP - 53 PB - Springer CY - Berlin Heidelberg AN - OPUS4-27393 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Stephan, Ina A1 - Schulz, Ulrich A1 - Petzold, I. T1 - Die komplexe Wirkung von Schimmelpilz und Klima auf Polymeroberflächen und ihre Simulation im Labor T2 - 33. Jahrestagung der GUS, "Umwelteinflüsse erfassen, simulieren, bewerten" CY - Pfinztal, Deutschland DA - 2004-03-17 PY - 2004 SN - 3-9808382-4-2 SP - 69 EP - 84 PB - GUS CY - Pfinztal AN - OPUS4-4880 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Munz, Martin A1 - Sturm, Heinz ED - Bhushan, B. T1 - Nanomechanical Characterization of Structural and Pressure-Sensitive Adhesives KW - Scanning Force Microscopy KW - Modulated Lateral Force Microscopy KW - Stiffness KW - Friction KW - Interface/Interphase Interdiffusion PY - 2007 SN - 3-540-37320-9 DO - https://doi.org/10.1007/978-3-540-37321-6_8 VL - 7 SP - 301 EP - 347 PB - Springer CY - Berlin AN - OPUS4-14974 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stemann, Jan A1 - Kabbe, C. A1 - Adam, Christian ED - Thomé-Kozmiensky, K.J. ED - Beckmann, M. T1 - Phosphorrückgewinnung im Rahmen der Klärschlammbehandlung - das EU-Projekt P-REX - N2 - Das Element Phosphor ist für alle Lebewesen essentiell. Es ist insbesondere für den Energiestoffwechsel (ATP, ADP), das Speichern und Auslesen von Erbinformationen (DNA, RNA) sowie den Knochenbau unverzichtbar und kann weder synthetisiert noch substituiert werden. Für die Pflanzen- und Tierproduktion werden aus diesem Grund erhebliche Mengen an Phosphor benötigt. Wird dem Ackerboden durch das Pflanzenwachstum und die anschließende Ernte Phosphor entzogen, so muss dieser; zum Erhalt der Ertragsfähigkeit den landwirtschaftlichen Flächen wieder zugeführt werden. Die weitverbreitete direkte Ausbringung von Klärschlamm wird zunehmend kritisch hinterfragt und ist in vielen EU Ländern deutlich rückläufig bzw. verboten. Neben der Hygieneproblematik sind hier insbesondere erhöhte Schwermetallgehalte sowie organische Schadstoffe als kritisch anzusehen. KW - Klärschlammasche KW - Ressourcen KW - Wertstoffpotential KW - Phosphorrückgewinnung PY - 2014 SN - 978-3-944310-06-0 VL - 11 SP - 749 EP - 763 PB - TK Verlag Karl Thomé-Kozmiensky CY - Neuruppin AN - OPUS4-31143 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - Reliability of polymer based composites - interfaces and interphases from the nanomechanical point of view T2 - 15th International Congress on Electron Microscopy (ICEM) CY - Durban, South Africa DA - 2002-09-01 PY - 2002 SN - 0-620-29294-6 SP - 619 EP - 620 PB - Microscopy Society of Southern Africa CY - Onderstepoort AN - OPUS4-1833 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Adam, Christian ED - H.J. Linke, T1 - Phosphorrückgewinnung aus Abwasser, Klärschlamm und Klärschlammasche T2 - 1. Darmstädter Ingenieurkongress - Bau und Umwelt CY - Darmstadt, Deutschland DA - 2009-09-14 PY - 2009 SN - 978-3-941799-00-4 SP - 62 EP - 66 CY - Darmstadt AN - OPUS4-19896 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Adam, Christian A1 - Kley, Gerd A1 - Simon, Franz-Georg ED - Wang, B. ED - J.H. Song, ED - H. Abe, T1 - Thermal treatment of municipal sewage sludge aiming at marketable P-fertilisers T2 - 8th International Conference on Eco-materials (ICEM8 2007) CY - London, UK DA - 2007-07-09 KW - Sewage sludge KW - Mono-incineration KW - Ash treatment KW - Thermo-chemical treatment KW - P-fertiliser PY - 2007 SN - 978-1-902316-54-3 VL - 2 SP - 435 EP - 442 PB - Brunel University Press CY - London, UK AN - OPUS4-16470 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schulz, Eckhard A1 - Sturm, Heinz A1 - Stark, Wolfgang A1 - Bovtun, V. ED - Xia, Z. T1 - Determination of electric properties of heterogeneous systems using the contact and noncontact scanning force microscopy (SFM) N2 - With an extended contact and non-contact mode scanning force microscope samples with different heterogeneous electrical properties can be characterized. The contact mode method allows the determination of local electric conductivities of heterogeneous systems at the sample surfaces. An interpretation of this behaviour can be obtained in combination with other SFM modes such as topography, friction and compliance used simultaneously. The non-contact mode SFM allows to get more information about the local surface charge of heterogeneous samples. In this paper two new SFM approaches will be discussed on examples of carbon-fibre reinforced, organic and ceramic materials T2 - 9th International Symposium on Electrets (ISE 9) CY - Shanghai, China DA - 1996-09-25 PY - 1996 SN - 0-7803-2695-4 DO - https://doi.org/10.1109/ISE.1996.578094 SP - 334 EP - 339 PB - IEEE Service Center CY - Piscataway, NJ AN - OPUS4-6852 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rübner, Katrin A1 - Seher, Julia A1 - Hahn, A. A1 - Schnell, A. ED - Rohs, M. ED - Weichold, O. T1 - Hydrothermale Herstellung von Filter- und Speichermaterialien aus SiO2- und CaO-reichen Reststoffen N2 - Aus SiO2- und CaO-reichen Sekundärrohstoffen können in einem hydrothermalen Stoffumwandlungsprozess poröse Körnungen (Hydrothermalgranulate HTG) hergestellt werden. Die Erhärtung der HTG erfolgt dabei in einem Autoklav bei ca. 200 °C und 1,6 MPa Sattdampf ähnlich dem Prozess der Kalksandsteinherstellung. Festigkeit und Gefüge der HTG entwickeln sich durch die Ausbildung von Calciumsilicathydraten (CSH-Phasen), die durch die Reaktion zwischen Quarzpartikeln (SiO2) und Kalk (CaO) entstehen. SiO2-Lieferant ist ziegelhaltiger Mauerwerkbruch, der als Hauptmineralphase Quarz enthält. Papierasche kann mit ihren Anteilen an Freikalk und anderen reaktive Calciumverbindungen als Kalkersatz dienen. Über die Mischungszusammensetzung und die Reaktionsbedingungen werden die Eigenschaften der Reaktionsprodukte gezielt gesteuert. Die HTG haben Rohdichten kleiner als 2000 kg/m³. Ihr Gefüge ist durch ein eher ungeordnetes System an Mesoporen und kleinen Makroporen mit Porenweiten kleiner 100 nm gekennzeichnet. Diese Porenstruktureigenschaften legen eine Anwendung der HTG als Filter- oder Speichermaterial nahe. Sie können natürliche Rohstoffe, wie Bims, Lavasand und fluviale Sande, aus Primärrohstoffen hergestellte Produkte, wie Blähton, Keramik und Aktivkohle, sowie erdölbasierte Kunststoffadditive ersetzen, wobei die typischen Filter- und Speichereigenschaften der herkömmlichen Produkte nahezu erreicht werden. Dadurch wird einerseits für Reststoffe, die gegenwärtig ein hohes Verwertungsdefizit aufweisen, eine hochwertige Wieder- bzw. Weiterverwertungsmöglichkeit geschaffen und die Abfallmenge vermindert. Andererseits erfolgt eine Schonung von knapper werdenden natürlichen mineralischen Rohstoffen und Erdöl. In einem Forschungsprojekt werden derzeit die technischen Möglichkeiten der hydrothermalen Herstellung von leichten porösen Körnungen aus Mauerwerkbruch, Kalk und Papierasche sowie die Anwendung der HTG als Filtermaterial in Bodenfiltern zur Abwasserreinigung und als Wasserreservoir in Substraten von Pflanzwänden und zur inneren Nachbehandlung hochfester Betone systematisch untersucht. Der Beitrag berichtet insbesondere über die experimentelle Entwicklung der hydrothermalen Synthesestrategie, die nachfolgende Charakterisierung der HTG und die Beziehungen zwischen Gefügekennwerten und technischen Eigenschaften der Körnungen. KW - Hydrothermale Synthese KW - Filtermaterial KW - Speichermaterial KW - Reststoffe KW - Mauerwerkbruch KW - Papierasche KW - Rohstoffliches Recycling PY - 2019 SN - 978-3-947197-13-2 VL - 54 SP - 183 EP - 190 PB - Gesellschaft Deutscher Chemiker e.V. CY - Frankfurt/Main ET - 1. AN - OPUS4-50207 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ertel, Jens-Peter A1 - Niederleithinger, Ernst ED - Bullock, P. ED - Verbeek, G. ED - Paikowsky, S. ED - Tara, D. T1 - Impulse Response Measurement for Pile Integrity Testing Using a Shaker as Excitation Source and Regularized Deconvolution N2 - Concrete piles are used as a foundation when the load capacity of the soil is insufficient or when the sustainable soil is found at a higher depth. Among other impact factors, the load capacity depends on the pile’s integrity and length. Therefore, verifying these parameters using adequate methods is recommended. The most common procedure is the low-strain integrity test using the hammer impact method. Developed and established in the 1970s, this method uses stress waves induced by a hammer impact at the pile head and its reflections at impedance changes (length, defects, geometry changes) to estimate the length and defect locations. Although this method is widely used due to its low cost and fast conduction in situ, one disadvantage is its inability to classify the exact type of defect, i.e., crack, change in diameter, or concrete quality. Furthermore, very long and slender piles are difficult to test and small defects cannot be detected. In addition, it is necessary for the test engineer to hold a high level of experience and expertise in this field. The European Union–funded PileInspect project (2013–2016) aimed to compensate for these disadvantages by using a low-cost shaker as the excitation source and sophisticated artificial intelligence algorithms for damage detection (higher-order spectra method). Because this technology lacks the capacity to localize damages and verify the pile length, an additional impulse response (IR) measurement technique was developed using vibrational excitation and regularized deconvolution to extract the depth information from the data in a similar manner as the hammer method. Simulations and subsequent experiments conducted at a test facility on 90-cm-diameter bored piles 11 m in length and containing cracks at approximately 4 m below the pile head confirmed the capacity to determine the pile length. Damage diagnosis and localization, however, are more difficult than for the hammer method. Although the damaged piles could be distinguished from the intact piles, in a blind test, this method might lead to misinterpretations caused by perturbations arising from the deconvolution process. The results also indicated that the low-cost shaker used for these measurements might be inappropriate for the transferal of sufficient energy. Although the IR method cannot compensate for the disadvantages of the hammer method by itself, it may enable the possibility of using long and fully controllable and repeatable signals (chirp, synthetic impacts, even noise, etc.) for pile integrity testing in the future. KW - Pile integrity testing KW - L-curve KW - Tikhonov regularization KW - NDT PY - 2019 SN - 978-0-8031-7667-6 DO - https://doi.org/10.1520/STP161120170162 VL - 1611 SP - 184 EP - 204 PB - ASTM International CY - West Conshohoken, PA, USA AN - OPUS4-48794 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Niederleithinger, Ernst A1 - Katzenbach, R. A1 - Hillmann, S. A1 - Schallert, M. A1 - Unseld, H. A1 - Willmes, M. ED - Bullock, P. ED - Verbeek, G. ED - Paikowsky, S. ED - Tara, D. T1 - A Framework for Nondestructive Testing Used in Foundation Reuse Projects N2 - The reuse of existing foundations is considered in various construction Projects to save time and costs while avoiding unnecessary interference with other underground objects. Because the design and as-built drawings might not be complete and questions may arise regarding the condition of the foundations, a detailed investigation is a prerequisite for the planning process in most cases. Nondestructive testing (NDT) techniques are a core part of this endeavor. The processes and procedure for foundation reuse planning are not yet standardized, and the possibilities and limitations of NDT methods are not known to many planners and stakeholders. The German research Project REFUND (2014–2016) has developed charts for the planning and Investigation process that consider available standards and the current state of the art in NDT. These charts are separately available for single and strip, slab, and pile foundations. Available NDT methods have been compiled and evaluated for specific tasks at these foundation types, including their respective limitations. The procedures have been successfully tested in two real-world projects. The results from these projects enable planners to improve the reliability of the process while potentially saving significant resources. This paper discusses the procedures for pile foundations and demonstrates the use of various NDT methods in a project on the reuse of electrical tower foundations. KW - Foundation reuse KW - Pile integrity testing KW - Parallel seismic PY - 2019 SN - 978-0-8031-7667-6 DO - https://doi.org/10.1520/STP161120170159 VL - 1611 SP - 238 EP - 253 PB - ASTM International CY - West Conshohoken, PA, USA AN - OPUS4-48795 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brookes, Stephen-Peter A1 - Kühn, Hans-Joachim A1 - Skrotzki, Birgit A1 - Klingelhöffer, Hellmuth A1 - Sievert, Rainer A1 - Pfetzing, J. A1 - Eggeler, G. ED - K. Maruyama, ED - M. Niinomi, ED - S. Akiyama, ED - M. Ikeda, ED - M. Hagiwara, T1 - Axial-torsional thermo-mechanical fatigue of Ti-45 Al-5Nb-0.2B-0.2C T2 - 11th World Conference on Titianium (JIMIC 5) CY - Kyoto, Japan DA - 2007-06-03 KW - Gamma titanium aluminide KW - Thermo-mechanical fatigue KW - TMF KW - Axial-torsional loadings KW - Microstructure PY - 2007 SN - 978-4-88903-406-6 VL - 1 SP - 679 EP - 682 PB - Japan Institute of Metals CY - Kyoto AN - OPUS4-16669 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Olbricht, Jürgen A1 - Neddemeyer, Torsten A1 - Hünert, Daniela A1 - Klingelhöffer, Hellmuth A1 - Kranzmann, Axel A1 - Skrotzki, Birgit T1 - Mechanical properties of superheater materials after ageing and corrosion in CO2 rich flue gases T2 - First international conference on materials for energy CY - Karlsruhe, Germany DA - 2010-07-04 KW - Power generation KW - Superheater materials KW - Hot corrosion KW - Carburisation PY - 2010 SN - 978-3-89746-117-8 IS - Extended abstracts - Book A SP - 251 EP - 253 AN - OPUS4-21727 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jaunich, Matthias A1 - Probst, Ulrich A1 - Schulz, Sebastian A1 - Wolff, Dietmar A1 - Stark, Wolfgang ED - Berger, K.-F. ED - Kiefer, S. T1 - Elastomere - Untersuchung des Tieftemperaturverhaltens im Dichtungseinsatz N2 - Aufgrund ihrer einfachen und zuverlässigen Anwendung werden Elastomere für viele Dichtungsaufgaben eingesetzt. In vielen Anwendungsbereichen, wie z.B. Verkehr, Luftfahrt und Verfahrenstechnik, können während des Einsatzes tiefe Temperaturen auftreten, bei denen die Funktionsfähigkeit der Dichtung erhalten bleiben muss. Daher ist die Untersuchung des Verhaltens von Elastomerdichtungen bei tiefen Temperaturen wichtig, um ihren Temperatureinsatzbereich nach unten abzugrenzen und dadurch einen verlässlichen Betrieb zu sichern. Ziel dieser Arbeit ist es, den sicheren Einschluss von gefährlichen Gütern unter verschiedenen Umgebungsbedingungen und über lange Zeiten zu ermöglichen bzw. die Materialauswahl entsprechend zu steuern. KW - Dichtung KW - Druckverformungsrest KW - Elastomer KW - Glasübergang PY - 2013 SN - 978-3-9811509-7-1 SP - 82 EP - 91 CY - Mannheim AN - OPUS4-29661 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klingelhöffer, Hellmuth A1 - Kühn, Hans-Joachim A1 - Matzak, Kathrin A1 - Kazak, Fedor A1 - Skrotzki, Birgit ED - Frenz, Holger ED - Grellmann, Wolfgang T1 - Hochtemperatur-Ermüdungsverhalten von warmfestem Gusseisen T2 - Tagung Werkstoffprüfung 2008 "Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung" CY - Berlin, Deutschland DA - 2008-12-04 KW - Hochtemperatur-LCF KW - Grauguss mit globularem Graphit KW - EN GJS X SiMo 4.05 KW - EN GJS X SiMo 5.1 KW - High temperature LCF KW - Ductile grey cast iron PY - 2008 SN - 978-3-00-026399-6 SN - 1861-8154 N1 - Serientitel: DVM-Bericht – Series title: DVM-Bericht IS - 642 SP - 97 EP - 104 PB - DVM CY - Berlin AN - OPUS4-18689 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Procop, Mathias A1 - Hodoroaba, Vasile-Dan A1 - Bjeoumikhov, A. A1 - Eggert, F. A1 - Wedell, R. T1 - Combination of electron probe microanalysis and X-ray fluorescence analysis in a scanning electron microscope T2 - 45th Annual Port Elizabeth Conference CY - Port Elizabeth, South Africa DA - 2006-11-29 KW - myXRF at SEM KW - EPMA KW - Detection limits PY - 2006 SN - 0-620-37294-X VL - 36 SP - 26 CY - Onderstepoort AN - OPUS4-14567 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Goral, Milan A1 - Kömmling, Anja A1 - Probst, Ulrich A1 - Wossidlo, Peter A1 - Jaunich, Matthias A1 - Wolff, Dietmar A1 - Völzke, Holger T1 - Langzeitversuche über 10 Jahre an Federkern-Metalldichtungen mit Aluminium- bzw. Silberummantelungen N2 - Federunterstützte Metalldichtungen mit Aluminium(Al)- oder Silber(Ag)-Ummantelung werden u.a. in Behältern für Wärme entwickelnde radioaktive Abfälle eingesetzt, da diese Dichtungen eine sehr gute Dichtheit gewährleisten sowie Langlebigkeit und Beständigkeit gegenüber erhöhten Temperaturen und radioaktiver Strahlung aufweisen. Auch wenn die Sicherheit solcher Behälter und der verwendeten Dichtungen vielfach belegt wurde, sind sie Gegenstand andauernder Forschung, etwa im Hinblick auf eine absehbar benötigte verlängerte Zwischenlagerdauer. Aus diesem Grund werden an der Bundesanstalt für Materialforschung und -prüfung (BAM) im Fachbereich 3.4 „Sicherheit von Lagerbehältern“ seit über 20 Jahren Versuche an solchen Metalldichtungen durchgeführt. Dabei sollen zusätzliche Erkenntnisse hinsichtlich der Sicherheitsreserven der Dichtungen in unterstellten Störfallszenarien (axiale Bewegung des Deckelsystems bzw. Aufweitung der Nutgeometrie) und insbesondere detailliertere Erkenntnisse zum Langzeitverhalten gewonnen werden. KW - Federunterstützte Metalldichtungen KW - Transport- und Lagerbehälter für radioaktive Stoffe KW - Langzeitversuche KW - Alterung KW - Dichtheit KW - Leckagerate KW - Helium-Dichtheitsprüfung PY - 2023 VL - 2023 SP - 43 EP - 63 PB - ISGATEC GmbH CY - Mannheim AN - OPUS4-56399 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Girard, L. A1 - Tung, S. A1 - Woydt, Mathias A1 - Bachelder, D. ED - Totten, G. E. ED - Shah, J. S. ED - Forester, D. R. T1 - Automotive engine lubricants N2 - In 2003, ASTM Manual 37, Fuels and Lubricants Handbook: Technology, Properties, Performance and Testing, featured a chapter discussing automotive lubricants, including engine oils, automatic transmission fluids, manual transmission fluids, gear lubricants, and greases. This chapter, by Schwartz, Tung, and McMillan, surveyed all of these classes of lubricants, up to its publication in 2003. More recently, the period between 2003 and 2010 has been addressed as part of a book copublished by ASTM and SAE International (coeditors Simon Tung and George Totten), where Fox surveyed the development of engine oil specifications that emerged during those years. This chapter surveys the evolution of engine oil design and testing since 2002 and concludes with insights into future directions offered by recent tribological research. Our objective is to provide a reader new to the field with an understanding of the following: - Engine oil composition and formulation - North American engine oil specification development, and an outline of emergent European specifications - How emergent specifications and legislative requirements are linked to the introduction of new engine hardware - How tribological innovation can contribute to future enhancements in engine efficiency In parallel, we will provide several tables comparing groups of contemporaneous specifications. KW - Engine oil design KW - Engine oil testing PY - 2019 UR - https://www.astm.org/mnl3720160034.html SN - 978-0-8031-7089-6 SN - 978-0-8031-7090-2 DO - https://doi.org/10.1520/mnl3720160034 SP - 753 EP - 863 PB - ASTM International CY - West Conshohocken, PA ET - 2 AN - OPUS4-53977 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jaunich, Matthias A1 - Stark, Wolfgang A1 - Wolff, Dietmar T1 - Messung des Tieftemperaturverhaltens von Elastomer-Dichtungen T2 - TECHNOMER 2009 - 21. Fachtagung über Verarbeitung und Anwendung von Polymeren CY - Chemnitz, Deutschland DA - 2009-11-12 KW - Dichtungen KW - Elastomere KW - Tieftemperaturverhalten PY - 2009 SN - 978-3-939382-09-6 IS - ETV7 SP - 1 EP - 9 AN - OPUS4-20386 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Trappe, Volker A1 - Günzel, Stephan A1 - Jaunich, Matthias ED - Yao, W. ED - Renard, J. ED - Himmel, N.A. T1 - Correlation between crack propagation rate and cure process of epoxy resins KW - Fracture toughness KW - Crack resistance KW - Fracture mechanics KW - Plastics KW - Crack propagation PY - 2012 SN - 978-1-60595-091-4 SP - 277 EP - 290 PB - DEStech Publications, Inc. CY - Lancaster, PA, USA AN - OPUS4-27947 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Zaghdoudi, M. A1 - Kömmling, Anja A1 - Jaunich, Matthias A1 - Wolff, Dietmar ED - Altenbach, H. ED - Hitzler, L. ED - Johlitz, M. ED - Merkel, M. ED - Öchsner, A. T1 - Analysis of Heterogeneous Ageing of HNBR O-Rings N2 - Abstract Hydrogenated nitrile butadiene rubber (HNBR) elastomer was thermo-oxidatively aged at different temperatures up to 150 °C. Fourier transform infrared spectroscopy (FTIR), compression stress relaxation (CSR) and international rubber hardness degree (IRHD) microhardness were used to characterise the chemo-mechanical changes of HNBR O-rings during thermo-oxidative ageing. FTIR shows the development of carbonyl, methyl and ester groups but the nitrile content was not affected by ageing. The effect of sample geometry during CSR was investigated. CSR data were converted through integrated kinetic laws. The conversion has proven its sensibility to detect heterogeneous ageing. This was confirmed by the IRHD measure-ments across the section of O-rings. The influence of compression during ageing was assessed through IRHD measurements across the section of compressed and uncom-pressed aged O-rings. The DLO effect was more pronounced in compressed O-rings. By applying the model of Wise et al., theoretical IRHD and oxidation profiles were determined on the basis of IRHD experimental data of compressed O-rings. Good agreements between the experimental and the theoretical IRHD profiles in the core region were obtained. However, near the edge, the theoretical IRHD values were overestimated. KW - Ageing KW - Rubber seals KW - Stress relaxation KW - Modelling PY - 2024 SN - 978-3-031-49042-2 DO - https://doi.org/10.1007/978-3-031-49043-9 SN - 1869-8433 SP - 331 EP - 348 PB - Springer Nature CY - Cham, Switzerland AN - OPUS4-59769 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wolff, Dietmar A1 - von der Ehe, Kerstin A1 - Jaunich, Matthias A1 - Böhning, Martin A1 - Goering, Harald ED - Yamamoto, T. T1 - (U)HMWPE as neutron radiation shielding materials: impact of gamma radiation on structure and properties N2 - Due to their extreme high hydrogen contents, high molecular weight (HMW-) and ultra-high molecular weight (UHMW-) polyethylene (PE) are a comprehensible choice as neutron radiation shielding material in casks for storage and transport of radioactive materials. But as a direct consequence of inserting radioactive material in such casks, gamma radiation occurs. Hence, the impact of gamma radiation on the molecular structure of polyethylene has to be taken into consideration. Consequently, PE has to withstand any type of gamma radiation induced degradation affecting safety relevant aspects in order to be applicable for long term neutron radiation shielding purposes during the whole storage period (in Germany, for instance, up to 40 years). The scope of our investigation comprises an estimation of the impact of gamma radiation and temperature on the molecular and supra molecular structure of the two types of PE used as neutron radiation shielding cask components. A further point which is worth exploring is to what extent these changes are detectable by conventional analysis methods. Therefore, thermoanalytical measurements were performed such as differential scanning calorimetry (DSC), thermo mechanical analysis (TMA), dynamic mechanical analysis (DMA), and thermo gravimetric analysis (TGA). Additionally optical and weighing methods were applied. With those methods it is possible to detect structural changes in polyethylene induced by exposure to gamma radiation. The observed amounts of changes of the irradiated material are not safety relevant for the application of polyethylene as neutron radiation shielding material; moreover, some properties actually improve via irradiation. KW - HMW-PE KW - UHMW-PE KW - Gamma irradiation KW - Neutron radiation shielding material PY - 2013 SN - 978-0-8031-7533-4 DO - https://doi.org/10.1520/STP103980 N1 - Serientitel: STP – Series title: STP VL - 25 IS - STP 1547 SP - 211 EP - 227 AN - OPUS4-27931 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Günther, Burkhard A1 - Bettge, Dirk A1 - Portella, Pedro Dolabella A1 - Skrotzki, Birgit A1 - Hemptenmacher, J. A1 - Peters, P.W.M. ED - Pandey, A. ED - Kendig, K. L. ED - Lewandowski, J. T1 - Fatigue behavior and fatigue damage of a Ti-6242/SCS-6 metal matrix composite T2 - TMS 2007 annual meeting & exhibition CY - Orlando, FL, USA DA - 2007-02-25 KW - Metal matrix composites KW - Isothermal fatigue KW - Thermo-mechnical fatigue KW - Damage analysis KW - Viscoplastic model KW - Simulation PY - 2007 SN - 9780873396660 SP - 127 EP - 136 PB - TMS CY - Warrendale, Pa AN - OPUS4-14615 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Unger, Wolfgang A1 - Wirth, Thomas A1 - Hodoroaba, Vasile-Dan ED - Hodoroaba, Vasile-Dan ED - Unger, Wolfgang ED - Shard, A. G. T1 - Auger electron spectroscopy N2 - An introduction in the application of Auger Electron Spectroscopy to surface chemical analysis of nanoparticles is given. Auger Electron Spectroscopy is a mature method in the field of surface chemical analysis. The chapter addresses the physical basis of the method, the principal design of recent instruments together with modes of operation and options for the presentation of spectra, as well as different approaches for qualitative (including identification of chemical species) and quantitative surface analysis of elements. An application paragraph on surface chemical analysis of nanoparticles by AES or SAM introduces the different measurement approaches and sample preparation strategies applied by analysts. The analysis of nanoparticle ensembles, the so-called selected point analysis where a narrow primary electron beam is centered on an individual nanoparticle, and chemical mapping of individual nanoparticles (or a line scan across) are addressed. Existing literature is reviewed and informative case studies presented. Limitations and pitfalls in the application of AES in surface chemical analysis of nanoparticles are also addressed. KW - Auger Electron Spectroscopy KW - Surface chemical analysis KW - Imaging surface chemical analysis KW - Nanoparticles KW - Nanotechnology PY - 2020 SN - 978-0-12-814182-3 DO - https://doi.org/10.1016/B978-0-12-814182-3.00020-1 SP - 373 EP - 395 PB - Elsevier CY - Amsterdam AN - OPUS4-50119 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mast, J. A1 - Verleysen, E. A1 - Hodoroaba, Vasile-Dan A1 - Kaegi, R. ED - Hodoroaba, Vasile-Dan ED - Unger, Wolfgang ED - Shard, A. G. T1 - Characterization of nanomaterials by transmission electron microscopy - Measurement procedures N2 - In this chapter, approaches are proposed for the descriptive and quantitative characterization of nano-objects with nanometer resolution. Measurements are based on the analysis of the characteristics of 2D projections of individual particles visualized on transmission electron micrographs. Incorporation of spectroscopic methods (EDS and EELS) for elemental analysis of nano-objects is recommended to identify subpopulations of nano-objects in mixtures based on their chemical composition. The focus lies on the determination of physicochemical properties which are essential in a legislatory and regulatory context to define the material as a nanomaterial (NM), and to assess its safety and toxicological potential, using widely accessible equipment. KW - Nanoparticles KW - Sample preparation KW - Image analysis KW - Transmission electron microscopy PY - 2020 SN - 978-0-12-814182-3 DO - https://doi.org/10.1016/B978-0-12-814182-3.00004-3 SP - 29 EP - 48 PB - Elsevier CY - Amsterdam AN - OPUS4-50121 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hodoroaba, Vasile-Dan ED - Hodoroaba, Vasile-Dan ED - Unger, Wolfgang ED - Shard, A. G. T1 - Energy-dispersive X-ray spectroscopy (EDS) N2 - As one of the widely used analytical methods for the analysis of elemental composition of solid matter, energy dispersive X-ray spectroscopy (EDS) has recently gained significant importance regarding its application to the chemical analysis of nanoparticles, especially in conjunction with the use of a scanning electron microscope (SEM) and the use of the transmission operation mode of SEM (STEM-in-SEM). This development was mainly driven by the technological progress with highly sensitive EDS detectors, such that individual nanoparticles can be quickly inspected with EDS at a SEM. Qualitative information on elemental composition with about 10 nm spatial resolution can be achieved complementary to the high-resolution information of the sample surface morphology within the same scanned area as provided by the electron microscope. Representative examples with successful EDS analysis on nanoparticles are presented, but also limitations of the method are described. KW - EDS KW - EPMA KW - X-rays KW - SEM/EDS PY - 2020 SN - 978-0-12-814182-3 DO - https://doi.org/10.1016/B978-0-12-814182-3.00021-3 SP - 397 EP - 417 PB - Elsevier CY - Amsterdam AN - OPUS4-49991 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Clifford, C. A1 - Stintz, M. A1 - Hodoroaba, Vasile-Dan A1 - Unger, Wolfgang A1 - Fujimoto, T. ED - Hodoroaba, Vasile-Dan ED - Unger, Wolfgang ED - Shard, A. G. T1 - International standards in nanotechnologies N2 - This chapter provides an overview of what standards are, why they are important, and how they are developed. There is a focus on the work of standards committees relevant to nanotechnology measurement and characterization with tables detailing the standards that are currently available for a large number of different techniques, materials, and applications at the nanoscale. KW - Standards KW - Nanotechnology KW - Reproducibility KW - ISO KW - CEN KW - VAMAS PY - 2020 SN - 978-0-12-814182-3 DO - https://doi.org/10.1016/B978-0-12-814182-3.00026-2 SP - 511 EP - 525 PB - Elsevier CY - Amsterdam AN - OPUS4-50165 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hodoroaba, Vasile-Dan A1 - Unger, Wolfgang A1 - Shard, A. G. ED - Hodoroaba, Vasile-Dan ED - Unger, Wolfgang ED - Shard, A. G. T1 - Conclusions and perspectives N2 - This chapter briefly summarizes the methods selected within this book for the characterization of nanoparticles with regard to commonly accessible properties: nanoparticle size and size distribution, shape, surface area, surface charge, aggregation state, structure, chemical composition, surface chemistry, and nanoparticle number concentration. Current progress of measurement and analysis, as far as possible according to standard operation procedures, has been the focus of this work. A number of new and less commonly used methods have not been covered, and we outline some of these in this chapter. Future challenges such as automated measurement and analysis, read-across approaches for the prediction of properties, knowledge of measurement uncertainties, the need for certified reference materials, and the necessity to complement measurements methods to obtain more reliable results are covered, and the unmet measurement requirements for real-world nanoparticles are described. KW - Physicochemical characterization KW - Standard operation procedures KW - Data correlation KW - Method development KW - Trends PY - 2020 SN - 978-0-12-814182-3 DO - https://doi.org/10.1016/B978-0-12-814182-3.00006-7 SP - 527 EP - 534 PB - Elsevier CY - Amsterdam AN - OPUS4-50167 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Shard, A. G. A1 - Hodoroaba, Vasile-Dan A1 - Unger, Wolfgang ED - Hodoroaba, Vasile-Dan ED - Unger, Wolfgang ED - Shard, A. G. T1 - Introduction N2 - The purpose of this book is to provide a comprehensive collection of analytical methods that are commonly used to measure nanoparticles, providing information on one, or more, property of importance. The chapters provide up-to-date information and guidance on the use of these techniques, detailing the manner in which they may be reliably employed. Within this chapter, we detail the rationale and context of the whole book, which is driven by the observation of a low level of reproducibility in nanoparticle research. The aim of the book is to encourage awareness of both the strengths and weaknesses of the various methods used to measure nanoparticles and raise awareness of the range of methods that are available. The editors of the book have, for many years, been engaged in European projects and standardization activities concerned with nanoparticle analysis and have identified authors who are experts in the various methods included within the book. This has produced a book that can be used as a definitive guide to current best practice in nanoparticle measurement. KW - Nanoparticles KW - Size distribution KW - Shape KW - Chemistry KW - Coating KW - Concentration KW - Standards KW - Charge KW - Characterisation PY - 2020 SN - 978-0-12-814182-3 DO - https://doi.org/10.1016/B978-0-12-814182-3.00001-8 SP - 1 EP - 6 PB - Elsevier CY - Amsterdam AN - OPUS4-50166 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gibson, N. A1 - Kuchenbecker, Petra A1 - Rasmussen, K. A1 - Hodoroaba, Vasile-Dan A1 - Rauscher, H. ED - Hodoroaba, Vasile-Dan ED - Unger, Wolfgang ED - Shard, A.G. T1 - Volume-specific surface area by gas adsorption analysis with the BET method N2 - This chapter first gives an introduction to the concepts of SSA and volume-specific surface area (VSSA) and an outline of the BET method. It continues with a discussion of the relationship between particle size, shape, and the VSSA, followed by an overview of instrumentation, experimental methods, and standards. Finally, sections on the use of the VSSA as a tool to identify nanomaterials and non-nanomaterials and its role in a regulatory context provide some insight on the importance of VSSA in the current Regulation of nanomaterials. KW - Nanomaterials KW - Volume specific surface area PY - 2020 SN - 978-0-12-814182-3 DO - https://doi.org/10.1016/B978-0-12-814182-3.00017-1 SP - 265 EP - 293 PB - Elsevier CY - Amsterdam AN - OPUS4-49572 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Baer, D. R. A1 - Cant, D. J. H. A1 - Castner, D. G. A1 - Ceccone, G. A1 - Engelhard, M. H. A1 - Karakoti, A. S. A1 - Müller, Anja ED - Hodoroaba, Vasile-Dan ED - Unger, Wolfgang ED - Shard, A. G. T1 - Preparation of nanoparticles for surface analysis N2 - A variety of methods used to prepare nano-objects for surface analysis are described along with information about when they might be best applied. Intrinsic properties of NPs which complicate their characterization and need to be considered when planning for surface or other analyses of NPs are identified, including challenges associated with reproducible synthesis and functionalization of the particles as well as their dynamic nature. The relevant information about the sample preparation processes, along with analysis details and data that need to be added to the collection of material provenance information is identified. Examples of protocols that have been successfully used for preparation of nano-objects for surface analysis are included in an annex. KW - Sample preparation KW - Nanoparticles KW - Surface chemistry KW - XPS KW - Dynamic behavior KW - Nano-object KW - Surface analysis PY - 2020 SN - 978-0-12-814182-3 DO - https://doi.org/10.1016/B978-0-12-814182-3.00018-3 SP - 295 EP - 347 PB - Elsevier CY - Amsterdam AN - OPUS4-50186 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schaepe, Kaija A1 - Jungnickel, H. A1 - Heinrich, Thomas A1 - Tentschert, J. A1 - Luch, A. A1 - Unger, Wolfgang ED - Hodoroaba, Vasile-Dan ED - Unger, Wolfgang ED - Shard, A. G. T1 - Secondary ion mass spectrometry N2 - This chapter provides an introduction in secondary ion mass spectrometry as one of the leading surface chemical analysis and imaging techniques with molecular specificity in the field of material sciences. The physical basics of the technique are explained along with a description of the typical instrumental setups and their modes of operation. The application paragraph specifically focuses on nanoparticle analysis by SIMS in terms of surface spectrometry, imaging, analysis in organic and complex media, and depth profiling. A review of the existing literature is provided, and selected studies are showcased. Limitations and pitfalls as well as current technical developments of SIMS application in nanoparticle surface chemical analysis are equally discussed. KW - Time-of-flight secondary ion mass spectrometry KW - Surface chemical analysis KW - Imaging KW - Nanomaterials KW - Nanoparticles KW - Core-shell PY - 2020 SN - 978-0-12-814182-3 DO - https://doi.org/10.1016/B978-0-12-814182-3.00025-0 SP - 481 EP - 509 PB - Elsevier CY - Amsterdam AN - OPUS4-50187 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maiwald, Michael A1 - Klaer, R.-H. A1 - Wagner, A. ED - Kockmann, N. T1 - 100 % Digital in der Prozessindustrie Tutzing-Symposion Teil 3: Intelligente Nutzung von Daten und Bausteinen der Digitalisierung N2 - Digitalisierung und Industrie 4.0 verändern komplette Geschäftsmodelle, heben neue Effizienzpotenziale und stärken die Wettbewerbsfähigkeit. Auf dem 57. Tutzing-Symposion vom 15.–18.04.2018 wurde mit Vorträgen und Kreativworkshops erkundet, welche speziellen Anforderungen die Prozessindustrie hat, welche digitalen Innovationen bereits umgesetzt wurden und wo noch Handlungsbedarf besteht. Ein Workshop befasste sich mit den Themenfeldern Datenkonzepte, Datenanalyse, Big Data und künstliche Intelligenz. KW - Prozessindustrie KW - Digitalisierung KW - Industrie 4.0 KW - Datenanalyse KW - Künstliche Intelligenz PY - 2019 SN - 1436-2597 VL - 22 SP - 14 EP - 19 PB - Wiley-VCH CY - Weinheim AN - OPUS4-48838 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stajanca, Pavol A1 - Krebber, Katerina ED - Kalli, K. ED - Brambilla, G. ED - O'Keeffe, S. T1 - Investigation of bare and tight-buffered optical fibers towards distributed humidity sensing N2 - Humidity is one of principal environmental parameters that plays an important role in various application areas. Using measurement of strain induced in an optical fiber by a water swellable coating represents a promising approach for realization of distributed humidity sensing (DHS). In this work, humidity and temperature response of four different commercial PI-coated fibers and four tight-buffered (TB) fibers is investigated with the aim of evaluating their potential for development of DHS in context of water ingress sensor for high-voltage power cable splices. PI-coated fibers exhibited close-to-linear humidity and temperature response. While the temperature response is relatively coating-independent, magnitude of humidity response was broadly correlated to the relative fiber-to-coating thickness ratio. In contrast, both humidity and temperature response of TB fibers is strongly influenced by buffer type, with Leoni TB900L fiber with Hytrel buffer exhibiting largest humidity and temperature sensitivity. While the response of tight-buffered fibers is generally nonlinear, roughly three-times higher humidity response can be achieved with TB900L compared to the most sensitive PI-coated fiber. Using the TB fiber can be, therefore, advantageous for simpler water detection applications, such as one targeted in this study, when larger sensitivity is more important than the linear response of the sensor. KW - Distribute fiberoptic sensor KW - Distributed humidity sensing KW - Water ingress detection KW - Optical backscatter reflectometry KW - Tight-buffered fibers KW - Polyimide-coated fibers PY - 2019 SN - 978-1-51063-124-3 DO - https://doi.org/10.1117/12.2539819 VL - 11199 SP - 111991X-1 PB - SPIE CY - Bellingham, Washington, USA AN - OPUS4-49207 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ebmeyer, S. A1 - Kasch, Thomas A1 - Volke, S. ED - Berger, K.-F. ED - Kiefer, S. T1 - Sauerstoffanlagen richtig abdichten N2 - Polytetrafluorethylen (PTFE) ist ein Hochleistungskunststoff, der sich aufgrund seiner einzigartigen Eigenschaften als unverzichtbarer Werkstoff in der modernen Industriegesellschaft etabliert hat. PTFE, modifiziertes PTFE und PTFE-Compounds kommen bevorzugt bei systemtechnischen Lösungen im Umfeld komplexer Regelwerke mit hohen Kompatibilitäts- bzw. regulativen Anforderungen, z.B. im Sauerstoff-, Lebensmittel- bzw. Trinkwasserkontakt, zur Anwendung. Beim Einsatz in Sauerstoffanlagen sollten Verarbeiter eine Reihe von Hinweisen beachten. KW - PTFE KW - Sauerstoff KW - Dichtmaterial KW - Prüfverfahren KW - Chargenprüfung KW - Sicherheitstechnische Bewertung PY - 2019 SN - 978-3-946260-03-5 VL - 2020 SP - 26 EP - 37 PB - Isgatec GmbH CY - Mannheim AN - OPUS4-49864 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Danielewski, A. A1 - Nöller, Renate ED - Collatz, C.-F. ED - Hansen, S. ED - Witte, R. T1 - Zerfallen, zerteilt, zerschnitten: die Humboldt Fragmente IX-XII und ihre Rekonstruktion N2 - In Berlin befinden sich Fragmente indigener Bilderhandschriften, die Alexander von Humboldt aus Mexiko mitbrachte. Fast alle stammen sie aus der ehemaligen Sammlung des Italieners Lorenzo Boturini, deren Reste heute über mehrere Länder verstreut sind. Der hohe Fragmentierungsgrad sowie ungeklärte Fragen zur Provenienz und Genese der Bruchstücke machen es schwierig, sie zu rekontextualisieren. Um dies dennoch zu erreichen, kommen einander ergänzende moderne natur- und kulturwissenschaftliche Methoden zum Einsatz. Als Beispiel einer Neuzuordnung werden die Humboldt-Fragmente IX-XII vorgestellt. Dass die vier Bruchstücke verwandt sind, wurde schon lange vermutet, nicht jedoch, dass sie zusammen mit einem nicht mehr vorhandenen Mittelteil ein einziges Dokument gebildet haben. Die Gründe für eine derartige Rekonstruktion werden als Ergebnis der Forschungsarbeiten diskutiert. KW - Zeichenmaterialien KW - Zerstörungsfreie Prüfung KW - Farbmittel PY - 2019 SN - 0002-6646 VL - 64 SP - 99 EP - 116 PB - ISENSEE VERLAG CY - Oldenburg AN - OPUS4-51929 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Probst, Ulrich A1 - Schulz, Sebastian A1 - Jaunich, Matthias A1 - Wolff, Dietmar A1 - Völzke, Holger ED - Berger, K.-F. ED - Kiefer, S. T1 - Langzeituntersuchungen an Metalldichtungen mit innen liegendem Federkern und doppelter Ummantelung N2 - In Deutschland werden in Transport- und Lagerbehältern (TLB) wärmeentwickelnde radioaktive Abfälle gegenwärtig über einen Zeitraum von bis zu 40 Jahren zwischengelagert. Aufgrund der Situation der noch nicht abgeschlossenen Endlagersuche werden hier möglicherweise Verlängerungen in Betracht zu ziehen sein. Im Deckeldichtsystem der TLB werden in der Regel Metalldichtungen vom Typ Helicoflex® eines französischen Herstellers verwendet, die aus einem innen liegenden Spiralfederkern und zwei Ummantelungen bestehen. Die Ermittlung der Fliess- und Relaxationseigenschaften der Dichtungskomponenten über den vorgesehenen langen Betriebseitraum sind vor dem Hintergrund des Erhalte eines geforderten hohen Dichtniveaus ein wichtiger Untersuchungsgegenstand. KW - Metalldichtung KW - Langzeiteignung KW - Dichtsysteme KW - Transport- und Lagerbehälter für radioaktive Stoffe PY - 2013 SN - 978-3-9811509-7-1 SP - 1 EP - 11 CY - Mannheim AN - OPUS4-28912 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vladár, A. E. A1 - Hodoroaba, Vasile-Dan ED - Hodoroaba, Vasile-Dan ED - Unger, Wolfgang ED - Shard, A. G. T1 - Characterization of nanoparticles by scanning electron microscopy N2 - In this chapter sample preparation, image acquisition, and nanoparticle size and shape characterization methods using the scanning electron microscope (SEM) in reflective and transmitted working modes are described. These help in obtaining reliable, highly repeatable results. The best solutions vary case-by-case and depend on the raw (powdered or suspension) nanoparticle material, the required measurement uncertainty and on the performance of the SEM. KW - Nanoparticles KW - Sample preparation KW - Electron microscopy KW - SEM KW - Size measurement KW - Shape KW - Threshold PY - 2020 SN - 978-0-12-814182-3 DO - https://doi.org/10.1016/B978-0-12-814182-3.00002-X SP - 7 EP - 27 PB - Elsevier CY - Amsterdam AN - OPUS4-50120 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sittner, Jonathan A1 - Hoffmann, T. A1 - Bertmer, M. A1 - Neubert, M. A1 - Schuster, T. A1 - Gluth, Gregor ED - D’Erme, C. ED - Paglia, C. ED - Cordero, E. G. T1 - Influence of the calcination method on the transformations and the reactivity of calcined low-kaolinitic clays N2 - This study investigates the calcination of low-grade kaolinitic clays containing high proportions of 2:1 clay minerals using two different methods: rotary kiln and fluidized bed calcination. The objective was to evaluate their potential as supplementary cementitious materials. The results demonstrate that even clays with low kaolinite content, when processed in a rotary kiln, exhibit pozzolanic properties suitable for cement replacement. Furthermore, fluidized bed calcination proved to be an energy-efficient alternative, achieving considerable dehydroxylation within just 30 min of calcination. This indicates the potential for substantial energy savings compared to conventional calcination techniques. However, further optimization of the process conditions is required to maximize reactivity and industrial applicability. The findings contribute to the ongoing development of sustainable cementitious materials by utilizing widely available, 2:1 clay mineral-dominated resources. KW - Calcined clay KW - Supplementary cementitous materials KW - Blended cement KW - Fluidized bed PY - 2026 SN - 978-3-032-14166-8 DO - https://doi.org/10.1007/978-3-032-14166-8_28 VL - 2 SP - 280 EP - 289 PB - Springer CY - Cham AN - OPUS4-65377 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maennig, Wolfgang-Werner A1 - Sander, Harro ED - Becker, Gerhard Wilhelm T1 - Rheologisches Verhalten von Werkstoffen PY - 1973 SP - 393 EP - 396 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9661 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bettge, Dirk A1 - Günther, Burkhard A1 - Portella, Pedro Dolabella A1 - Skrotzki, Birgit A1 - Hemptenmacher, J. A1 - Peters, P.W.M. T1 - Fatigue behavior and fatigue damage of a Ti-6242/SCS-6 metal matrix composite PY - 2008 SN - 978-3-18-092028-3 SN - 0083-5560 IS - 2028 SP - 435 EP - 436 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-17527 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jaunich, Matthias A1 - Stark, Wolfgang A1 - Wolff, Dietmar T1 - Low temperature properties of rubber seals T2 - 9th Fall rubber colloquium CY - Hannover, Germany DA - 2010-11-03 KW - Dichtungen KW - Elastomere KW - Tieftemperaturverhalten PY - 2010 SN - 978-3-9814076-0-0 SP - 175 EP - 178 AN - OPUS4-22331 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Paatsch, Wolfgang A1 - Hodoroaba, Vasile-Dan T1 - Coating technology of high strength steels without hydrogen embrittlement T2 - Super-high strength steels : 1st international conference CY - Milan, Italy DA - 2005-11-02 KW - High strength steel KW - Electroplating KW - Corrosion protection KW - Hydrogen embrittlement KW - Glow discharge optical emission spectroscopy KW - GDOES PY - 2005 SN - 88-85298-56-7 SP - 1 EP - 6(?) PB - AIM CY - Mailand AN - OPUS4-11974 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Igartua, A. A1 - Fdez-Pérez, X. A1 - Illarramendi, I. A1 - Luther, R. A1 - Rausch, J. A1 - Woydt, Mathias ED - Carmo, J. P. ED - Ribeiro, J. E. T1 - Biolubricants and triboreactive materials for automotive applications N2 - The text deals with passenger car motor oils (PCMO) with reduced metal-organic additives. KW - Biolubricants KW - Passenger car motor oils (PCMO) KW - Automotive KW - Tribology PY - 2012 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-464317 SN - 978-9-53510-698-2 DO - https://doi.org/10.5772/46852 SP - 119 EP - 146 PB - INTECH CY - Rijeka, Croatia AN - OPUS4-46431 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Grengg, C. A1 - Gluth, Gregor A1 - Mittermayr, F. ED - Jiang, G. T1 - Alkali-activated materials for sewers N2 - This chapter aims to give a brief introduction into the field of alkali activated materials (AAM) and their physicochemical material behavior when exposed to sulfuric acid and in biochemically aggressive sewer environments. Additionally, the differences in material behavior within chemical (abiotic) and microbially induced acid environments are highlighted. Finally, existing data on overall performance of AAM, compared to conventional concrete-based building materials in sewer systems will be discussed. KW - Alkali-activated materials KW - Geopolymers KW - MIC KW - Sewage systems PY - 2023 SN - 978-3-031-29940-7 SN - 978-3-031-29941-4 DO - https://doi.org/10.1007/978-3-031-29941-4_11 SP - 233 EP - 247 PB - Springer CY - Cham AN - OPUS4-57424 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rübner, Katrin A1 - Weimann, Karin A1 - Herbst, Tristan ED - Thomé-Kozmiensky, K.J. T1 - Möglichkeiten der Nutzung industrieller Reststoffe im Beton KW - Beton KW - Betonzusatzstoff KW - Brechsand KW - Filterrückstand KW - Gesteinskörnung KW - Hausmüllverbrennungsasche KW - Papierasche KW - Reststoffe KW - Recycling KW - Sekundärrohstoff KW - Zement KW - Zumahlstoff PY - 2008 SN - 978-3-935317-36-8 VL - 1 SP - 289 EP - 311 PB - TK-Verl. CY - Neuruppin AN - OPUS4-18787 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Carraba, L. A1 - Gluth, Gregor A1 - Pirskawetz, Stephan A1 - Krüger, Simone A1 - Bignozzi, M.C. ED - Falikman, V. ED - Realfonzo, R. ED - Coppola, L. ED - Hajek, P. ED - Riva, R. T1 - Fly ash-based lightweight geopolymer mortars for fire protection N2 - The present study aims to investigate the use of geopolymer mortars as passive fire protection system for steel structures. Coal fly ashes were used as aluminosilicate source and perlite was employed as aggregate to obtain a lightweight system. In addition, a geopolymer mortar containing quartz aggregate was produced for comparison. The geopolymer mortars were applied on stainless steel plates and exposed to both, cellulosic and hydrocarbon standard fire curves, according to ISO 834-1 and EN 1363-2, respectively. Acoustic emission measurements were conducted to analyze cracking phenomena during the high temperature exposure. The resulting temperature-time curves showed that the investigated system is effective in retarding the temperature rise of the steel plates. When the cellulosic fire curve was applied, a 20 mm [0.79 in.] thick layer of lightweight geopolymer mortar protected the steel substrate from reaching the critical temperature of 500 °C [932 °F] for at least 30 minutes, avoiding the rapid decrease of its mechanical properties and thus representing an important safety measure against accidental fires. No spalling phenomena on heating were detected; however, significant cracking was observed on cooling. KW - Alkali-activated materials KW - Geopolymers KW - Fire protection KW - Fire proofing KW - Acoustic emission PY - 2018 SN - 978-1-64195-022-0 VL - 326 SP - 26.1 EP - 26.10 PB - American Concrete Institute CY - Farmington Hills AN - OPUS4-46154 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klein, P. A1 - Theiler, Geraldine A1 - Friedrich, K. T1 - Tribological behavior of short Carbon fiber reinforced PTFE- and PEEK-compounds T2 - 15th International Sealing Conference CY - Stuttgart, Germany DA - 2008-10-07 KW - Polymer composite KW - Tribology KW - Low temperatures PY - 2008 SN - 978-3-00-025884-8 IS - A 22 SP - 292 EP - 301 PB - Leithner Media Production CY - Ebelsbach AN - OPUS4-19518 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Daum, Werner A1 - Hofmann, Detlef A1 - Basedau, Frank A1 - Brandes, K. A1 - Kubowitz, P. ED - Curbach, M. ED - Opitz, H. ED - Scheerer, S. ED - Hampel, T. T1 - Erweiterte Strukturabbildung von Brücken mit adaptiven mathematischen Modellen zur Lösung aktueller noch ungelöster Probleme N2 - Health monitoring von größeren Strukturen erfordert die Betrachtung der gesamten Struktur, indem sowohl jener Bereich, der experimentell behandelt wird, als auch derjenige, der einer analytischen mechanischen Untersuchung unterzogen wird, in einem Gesamtzusammenhang erfasst wird. Die umfassende Behandlung des Problems gelingt dann in einer Gesamtmatrix, die im Beitrag vorgestellt wird. Auf eine Erweiterung der Methode zur Detektierung anwachsender Schädigungen wird hingewiesen. KW - Structural Health Monitoring KW - Schadensdetektion KW - Adaptives mathematisches Modell PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:bsz:14-qucosa-201229 SN - 1613-6934 VL - Konstruktiver Ingenieurbau Dresden IS - 43 SP - 183 EP - 188 PB - Institut für Massivbau, TU Dresden CY - Dresden AN - OPUS4-43371 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klein, P. A1 - Zhang, Z. A1 - Friedrich, K. A1 - Theiler, Geraldine A1 - Hübner, Wolfgang T1 - Zur Bildung von Transferfilmen bei ausgewählten PTFE-Compounds T2 - Tribologie-Fachtagung 2002 CY - Göttingen, Deutschland DA - 2002-09-23 PY - 2002 SN - 3-00-003404-8 VL - 1 SP - 8-1-8-11 PB - GfT CY - Moers AN - OPUS4-1867 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Golze, Manfred A1 - Czichos, Horst A1 - Schmidt, Anita ED - Czichos, Horst ED - Saito, T. ED - Smith, L. T1 - Uncertainty and accuracy of measurement and testing N2 - In metrology and testing, the result of a measurement should always be expressed as the measured quantity value together with its uncertainty. The uncertainty of measurement is defined as a nonnegative Parameter characterizing the dispersion of the quantity values being attributed to a measurand. PY - 2011 SN - 978-3-642-16640-2 SP - 68 EP - 77 PB - Springer CY - Berlin, Heidelberg AN - OPUS4-24379 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Radtke, Martin A1 - Berger, Achim A1 - Ecker, Klaus A1 - Merchel, Silke A1 - Procop, Mathias A1 - Riesemeier, Heinrich A1 - Görner, Wolf A1 - Reiche, I. T1 - Synchrotron induced X-ray fluorescence for trace element analysis T2 - Hamburg Workshop CY - Hamburg, Germany DA - 2002-09-16 PY - 2002 SN - 3-924330-53-0 SP - 1(?) PB - Gesellschaft Deutscher Chemiker AN - OPUS4-1525 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reiche, I. A1 - Berger, Achim A1 - Duval, A. A1 - Görner, Wolf A1 - Guicharnaud, H. A1 - Merchel, Silke A1 - Radtke, Martin A1 - Riederer, J. A1 - Riesemeier, Heinrich T1 - Traces of Albrecht Dürer: Non-destructive analyses of Renaissance silverpoint drawings KW - Nuclear industry KW - Nuclear medicine PY - 2004 SN - 92-0-114703-1 SN - 0074-1876 IS - 1181 SP - 138 EP - 142 PB - IAEA CY - Vienna AN - OPUS4-5548 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reiche, I. A1 - Berger, Achim A1 - Duval, A. A1 - Görner, Wolf A1 - Guicharnaud, H. A1 - Merchel, Silke A1 - Radtke, Martin A1 - Riederer, J. A1 - Riesemeier, Heinrich A1 - Roth, M. ED - Röhrs, S. T1 - Auf den Spuren Albrecht Dürers - Zerstörungsfreie Untersuchung von Silberstiftzeichnungen mittels Mikro-PIXE und Synchrotron-induzierter Mikro-RFA T2 - Jahrestagung 2003 im Ethnologischen Museum Berlin-Dahlem CY - Berlin, Deutschland DA - 2003-03-12 PY - 2003 SN - 3-00-014223-1 SN - 0949-4057 SP - 118 EP - 120 CY - [Frankfurt am Main] AN - OPUS4-2356 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Görner, Wolf A1 - Merchel, Silke A1 - Radtke, Martin A1 - Riesemeier, Heinrich T1 - Schwefelbestimmung in Kraftstoffen mittels SYRFA N2 - Orientierende Versuche zur Schwefelbestimmung in Kraftstoffen haben gezeigt, dass die Röntgenbeamline der BAM bei BESSY II geeignet ist, Schwefel auch in kleinen Konzentrationen zu bestimmen. Da das Verfahren der synchrotronstrahlungsinduzierten Röntgenfluoreszenzanalyse (SYRFA) für den Vor-Ort-Einsatz nicht geeignet ist, ist das Ziel der Untersuchungen, durch Variation von Anregungsenergie und -geometrie mögliche Quellen für systematische Fehler zu untersuchen. Durch geeignete Korrekturfaktoren kann dann die Richtigkeit der Analyseergebnisse gewährleistet werden. Das Verfahren soll dann als Alternative bzw. Ergänzung zu zerstörenden Verfahren der Schwefelanalyse Anwendung finden. Damit wird ein Beitrag zur künftigen Herstellung zertifizierter Referenzmaterialien (ZRM) geleistet. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2003 CY - Mainz, Deutschland DA - 2003-05-26 PY - 2003 UR - http://www.ndt.net/article/dgzfp03/papers/p05/p05.htm SN - 3-931381-47-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 83-CD PB - DGZfP CY - Berlin AN - OPUS4-2558 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Merchel, Silke A1 - Berger, Achim A1 - Görner, Wolf A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Vogl, Jochen A1 - Frisch, A. A1 - Reiche, I. T1 - Kunst- und Kulturgüter unter "Beschuss" T2 - GDCh-Jahrestagung Chemie 2003 ; Jahrestagung der Fachgruppe Nuklearchemie ; 19. Seminar Aktivierungsanalyse CY - München, Deutschland DA - 2003-10-06 PY - 2003 SN - 3-936028-14-1 N1 - Serientitel: Kurzreferate / GDCh-Jahrestagung Chemie 2003 – Series title: Kurzreferate / GDCh-Jahrestagung Chemie 2003 IS - 5 SP - 68 PB - Gesellschaft Deutscher Chemiker CY - Frankfurt am Main AN - OPUS4-2686 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Frisch, A. A1 - Merchel, Silke A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Vogl, Jochen ED - Röhrs, S. T1 - Synchrotron-XRF und PIXE Untersuchungen an bronzezeitlichen Fussringen T2 - Jahrestagung 2003 im Ethnologischen Museum Berlin-Dahlem CY - Berlin, Deutschland DA - 2003-03-12 PY - 2003 SN - 3-00-014223-1 SN - 0949-4057 SP - 101 EP - 103 CY - [Frankfurt am Main] AN - OPUS4-2355 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Görner, Wolf A1 - Berger, Achim A1 - Merchel, Silke A1 - Pernicka, E. A1 - Radtke, Martin A1 - Reiche, I. A1 - Reinholz, Uwe A1 - Riederer, J. A1 - Riesemeier, Heinrich A1 - Wunderlich, C. H. T1 - Kunst- und Kulturgüter unter "Beschuss" T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 KW - SY-RFA KW - PIXE KW - PIGE KW - PAA KW - Zerstörungsfreie Analyse KW - Silberstiftzeichnungen KW - Himmelsscheibe von Nebra KW - Indische Moghulmalereien PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/p46/p46.htm SN - 3-931381-55-2 SP - 1(?) EP - 11(?) PB - DGZfP CY - Berlin AN - OPUS4-6897 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Eichelbaum, M. A1 - Rademann, K. A1 - Müller, Ralf A1 - Radtke, Martin A1 - Riesemeier, Heinrich A1 - Görner, Wolf T1 - Vom Atom zum Nanodraht: Kontrolliertes Wachstum von Edelmetall-Nanokristalliten in Kalk-Natron-Silikatglas T2 - 79. Glastechnische Tagung CY - Würzburg, Deutschland DA - 2005-05-23 KW - Glas KW - Metallnanocluster KW - Optische Eigenschaften PY - 2005 SN - 3-921089-43-3 SP - 15 Seiten PB - Deutsche Glastechnische Gesellschaft CY - Offenbach AN - OPUS4-7558 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hübner, Wolfgang A1 - Theiler, Geraldine A1 - Klein, P. A1 - Friedrich, K. T1 - Tribological behaviour of PTFE composites against steel at cryogenic temperatures T2 - 2nd World Tribology Congress ; 2nd WTC 2001 CY - Vienna, Austria DA - 2001-09-03 KW - PTFE composite KW - Cryogenic temperature KW - Transfer film KW - SEM KW - XPS PY - 2001 SN - 3-901657-09-6 SP - 1(?) EP - 4(?) PB - ÖTG CY - Vienna AN - OPUS4-12660 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reiche, I. A1 - Berger, Achim A1 - Duval, A. A1 - Görner, Wolf A1 - Guicharnaud, H. A1 - Merchel, Silke A1 - Radtke, Martin A1 - Riederer, J. A1 - Riesemeier, Heinrich A1 - Roth, M. ED - Denker, A. ED - Adriaens, A. ED - Dowsett, M. ED - Giumlia-Mair, A. T1 - Synchrotron radiation and protons on the traces of famous artists - Non-destructive analyses of silverpoint drawings by Albrecht Dürer KW - X-ray spectrometry KW - XRF KW - Röntgenfluoreszenzanalyse KW - RFA KW - Silverpoint drawing KW - Silberstiftzeichnung PY - 2006 SN - 3-8167-7178-5 SP - 91 EP - 101 PB - Fraunhofer-IRB-Verl. CY - Stuttgart AN - OPUS4-14190 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rübner, Katrin A1 - Bahlmann, Stefanie A1 - Weimann, Karin ED - Stark, J. T1 - Möglichkeiten der Nutzung industrieller Reststoffe im Beton T2 - 16. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2006-09-20 KW - Beton KW - Betonzusatzstoff KW - Brechsand KW - Gesteinskörnung KW - Mörtel KW - Müllverbrennungsasche KW - Puzzolan KW - Reststoffe PY - 2006 SN - 3-00-018263-2 N1 - Geburtsname von Bahlmann, Stefanie: Ramolla, S. - Birth name of Bahlmann, Stefanie: Ramolla, S. IS - Band 2 SP - 2-1349 - 2-1356 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-13715 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hofmann-Böllinghaus, Anja A1 - Knaust, Christian A1 - Beard, A. T1 - Modelling fire scenarios in residential buildings with respect to the benefit of smoke detectors and flame retardants T2 - 12th International Flame Retardants 2006 Conference CY - London, England, UK DA - 2006-02-14 KW - Fire scenarios KW - Modelling KW - CFD KW - Fire spread KW - Smoke spread PY - 2006 SN - 0-9541216-7-8 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. SP - 195 EP - 214 PB - Interscience Communications CY - London AN - OPUS4-12207 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mente, Tobias A1 - Böllinghaus, Thomas ED - Böllinghaus, Thomas ED - Lippold, J. C. ED - Cross, C. E. T1 - Numerical investigations on hydrogen-assisted cracking in duplex stainless steel microstructures N2 - Duplex stainless steels (DSS) are used in various industrial applications, e.g. in offshore constructions as well as in chemical industry. DSS reach higher strength than commercial austenitic stainless steels at still acceptable ductility. Additionally, they exhibit an improved corrosion resistance against pitting corrosion and corrosion cracking in harsh environments. Nevertheless, at specific conditions, as for instance arc welding, cathodic protection or exposure to sour service environments, such materials can take up hydrogen which may cause significant property degradation particularly in terms of ductility losses which, in turn, may entail hydrogen-assisted cracking (HAC). The cracking mechanism in DSS is different from steels having only a single phase, because hydrogen diffusion, stress-strain distribution and crack propagation are different in the austenite or ferrite phase. Therefore, the mechanism of HAC initiation and propagation as well as hydrogen trapping in DSS have not been fully clarified up to the present, as for most of the two-phase microstructures. At this point the numerical simulation can bridge the gap to a better insight in the cracking mechanism regarding the stress-strain distribution as well as hydrogen distribution between the phases, both austenite and ferrite, of the DSS. For that purpose, a two dimensional numerical mesoscale model was created representing the microstructure of the duplex stainless steel 1.4462, consisting of approximately equal portions of austenite and ferrite. Hydrogen assisted cracking was simulated considering stresses and strains as well as hydrogen concentration in both phases. Regarding the mechanical properties of austenite and ferrite different statements can be found in the literature, dependent on chemical composition and thermal treatment. Thus, various stress-strain curves were applied for austenite and ferrite simulating the HAC process in the DSS microstructure. By using the element elimination technique crack critical areas can be identified in both phases of the DSS regarding the local hydrogen concentration and the local mechanical load. The results clearly show different cracking behavior with varying mechanical properties of austenite and ferrite. Comparison of the results of the numerical simulation to those of experimental investigations on DSS will improve understanding of the HAC process in two phase microstructures. KW - duplex stainless steel 1.4462 (2205) KW - numerical simulation KW - hydrogen assisted cracking KW - diffusion PY - 2016 UR - http://link.springer.com/chapter/10.1007%2F978-3-319-28434-7_16 UR - http://www.springer.com/us/book/9783319284323 SN - 978-3-319-28432-3 SN - 978-3-319-28434-7 DO - https://doi.org/10.1007/978-3-319-28434-7_16 SP - Part V, 329 EP - 359 PB - Springer International Publishing CY - Switzerland ET - 1 AN - OPUS4-35591 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Simone A1 - Berger, Anka A1 - Hofmann-Böllinghaus, Anja A1 - Krause, Ulrich T1 - Investigations of smoke gas composition during a car fire T2 - Interflam 2010 - 12th International fire science & engineering conference (Proceedings) CY - Nottingham, UK DA - 2010-07-05 KW - FTIR spectroscopy KW - Combustion KW - Smouldering KW - Fire behaviour KW - Car fire PY - 2010 SN - 978-0-9541216-6-2 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. VL - 2 SP - 1755 EP - 1760 CY - London, UK AN - OPUS4-21854 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Cross, Carl Edward A1 - Coniglio, Nicolas ED - Carl E. Cross, ED - John C. Lippold, ED - Böllinghaus, Thomas ED - Herold, H. T1 - Weld solidification cracking: critical conditions for crack initiation and growth N2 - A perspective will be given that outlines important considerations in evaluating and predicting weldability. An examination will be made of the local conditions necessary for solidifications crack initiation and growth in a weld. This will be done in light of two prominent thermo-mechanical approaches involving critical strain and critical strain rate. Critical conditions will be identified based upon values available in the literature. Methods used to measure strain and strain rate will be compared. The interpretation of crack lenght measurements commonly used to quantify weldability will be questioned, based upon our current understanding of the problem. Complications and problem areas needing better definition will be identified and discussed, including strain distribution in the mushy zone, segregation at grain boundaries, effect of impurities, and effect of cooling rate on solidification path. Finally, a suggestion will be made for a new approach to weld development using in-situ strain rate measurements and new composition-strain rate maps that define the boundary between crack an no-crack conditions. T2 - Hot cracking phenomena in welds II CY - Berlin, Germany DA - 2007-03-05 KW - Solidification Cracking KW - Hot Cracking KW - Crack Initiation KW - Crack Growth KW - Critical Strain KW - Critical Strain Rate KW - Weldability Testing KW - Crack Prediction PY - 2008 SN - 978-3-540-78627-6 SP - 39 EP - 58 PB - Springer CY - Berlin AN - OPUS4-18319 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Askar, Enis A1 - Schröder, Volkmar A1 - Steinbach, J. T1 - Berechnung der Zündtemperatur des Zerfalls von Ethylenoxid und Ethylenoxid/Inertgas-Gemischen in Abhängigkeit vom Druck und vom Behältervolumen T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Zündtemperatur KW - Ethylenoxid KW - Zerfall KW - Sicherheitstechnik PY - 2010 SN - 978-3-89746-119-2 IS - P-14 SP - 1 EP - 14 CY - Frankfurt/M. AN - OPUS4-22386 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Coniglio, Nicolas A1 - Cross, Carl Edward ED - Carl E. Cross, ED - John C. Lippold, ED - Böllinghaus, Thomas ED - Herold, H. T1 - Weld parameter and minor element effects on solidification crack initiation in Aluminium N2 - Earlier work has established that a critical amount of 4043 filler is required to avoid solidification cracking when arc-welding 6060 aluminium, depending upon local strain conditions. For example, when the mushy zone behind the weld pool experiences a tensile strain from combined thermal and shrinkage stresses, the possibility exists for crack initiation. For a greater rate of strain, it has been determined that a greater 4043 dilution (i.e. higher weld metal silicon content) is required to avoid crack initiation. Making use of the Controlled Tensile Weldability (CTW) test and local strain extensometer measurements, a boundary has been established between crack and no-crack conditions for different local strain rates and filler dilutions, holding all other welding parameters constant. Using this established boundary as a line of reference, additional parameters have now been examined and their influence on cracking has been characterized. These parameter influences have included studies of weld travel speed, weld pool contaminants (Fe, O, and H), and grain refiner additions (TiAl3 + Boron). Each parameter has been independently varied and its effect on cracking susceptibility quantified in terms of a critical strain rate required to initiate cracking for a given 4043 filler dilution. T2 - Hot cracking phenomena in welds II CY - Berlin, Germany DA - 2006-03-05 KW - Aluminium Alloys KW - Solidification Cracking KW - Weld Defect KW - Hot Cracking KW - Crack Initiation KW - Critical Strain Rate KW - Parameter Effects KW - Minor Elements PY - 2008 SN - 978-3-540-78627-6 SP - 277 EP - 310 PB - Springer CY - Berlin AN - OPUS4-18323 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fedelich, Bernard A1 - Vöse, Markus ED - Klingbeil, D. ED - Vormwald, M. ED - Eulitz, K.-G. T1 - Modeling of creep damage by multiple cavity growth on grain boundaries T2 - 18th European conference on fracture (ECF 18) - Fracture of materials and structures from micro to macro scale CY - Dresden, Germany DA - 2010-08-30 KW - Creep KW - Cavities KW - Grain boundary KW - Damage PY - 2010 SN - 978-3-00-031802-3 SP - 1 EP - 8 AN - OPUS4-22269 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Engelhardt, Monika A1 - Gesatzke, Wolfgang A1 - Österle, Werner A1 - Müller, Urs A1 - Rooch, Heidemarie A1 - Saliwan Neumann, Romeo A1 - Urban, Ingrid T1 - Makro- und Mikrogefüge von Bremsbelägen KW - Bremsbelag KW - Polymermatrix-Verbundstoff KW - Röntgenfluoreszenzanalyse KW - REM KW - FIB KW - TEM PY - 2005 SN - 3-88355-343-3 SN - 0343-3579 N1 - Serientitel: Sonderbände der praktischen Metallographie – Series title: Sonderbände der praktischen Metallographie IS - 37 SP - 105 EP - 110 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-10996 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fedelich, Bernard ED - Blom, A. F. T1 - Modeling the cyclic deformations of single crystals of superalloys at high temperature T2 - 8th FATIGUE 2002 ; 8th International Fatigue Congress CY - Stockholm, Sweden DA - 2002-06-03 PY - 2002 SN - 1-901537-31-5 VL - 3 SP - 1561 EP - 1568 PB - EMAS, Engineering Materials Advisory Services CY - Cradley Heath, West Midlands AN - OPUS4-1383 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Winkler, Juliette A1 - Beck, M. A1 - Gluth, Gregor ED - Schneider, F. ED - Hehl, K. ED - Heyde, S. T1 - Kurz- und mittelfristige Verbundfestigkeit von alkaliaktivierten Mörteln auf Beton N2 - Ein zentrales Fundament moderner Gesellschaften ist eine intakte Abwasserinfrastruktur. Schäden infolge biogener Schwefelsäurekorrosion von konventionellen Betonen haben jedoch zu einem erheblichen Sanierungsbedarf geführt. Alkaliaktivierte Mörtel besitzen aufgrund eines hohen Säurewiderstands das Potential, einen Beitrag zur langfristigen Lösung dieses Problems zu leisten. Dazu müssen jedoch zunächst die Faktoren, die den Haftverbund zwischen diesen Mörteln und dem Betonsubstrat bestimmen, besser verstanden werden, um die Eigenschaften der Beschichtungssysteme gezielt anpassen und verbessern zu können. Die vorliegende Arbeit liefert hierzu einen Beitrag und zeigt dadurch Wege zu einer technisch machbaren und nachhaltigen Sanierung von Abwasserbauwerken auf. KW - Alkalisch aktivierte Bindemittel KW - Abwassersysteme KW - Reparatursysteme KW - Verbund KW - Dauerhaftigkeit PY - 2022 SN - 978-3-8440-8818-2 SP - 89 EP - 100 CY - Berlin AN - OPUS4-57701 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weimann, Karin A1 - Müller, A. ED - Stark, J. T1 - Baustoffeigenschaften von nass aufbereiteten Betonbrechsanden T2 - 16. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2006-09-20 PY - 2006 SN - 3-00-018263-2 VL - 2 SP - 2-1365 - 2-1372 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-18798 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weimann, Karin A1 - Müller, A. ED - Ravindra K. Dhir, ED - Peter C. Hewlett, ED - Laslo J. Csetenyi, ED - Moray D. Newlands, T1 - Effects of wet processed crushed concrete fines as secondary aggregates in building materials T2 - International Conference "Role for Concrete in Global Development" CY - Dundee, Scotland, UK DA - 2008-07-08 KW - Recycling KW - Beton KW - Bauschutt KW - Recycled aggregates KW - Crushed concrete fines KW - Wet treatment KW - Jig KW - Building material properties PY - 2008 SN - 978-1-84806-037-1 IS - EP86 SP - 499 EP - 510 PB - IHS BRE Press AN - OPUS4-18802 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ecker, Melanie A1 - Pretsch, Thorsten ED - Udomkichdecha, W. ED - Böllinghaus, Thomas ED - Manonukul, A. ED - Lexow, J. T1 - Freely configurable functionalization tool for switchable information carriers N2 - The selective compression of quick response (QR) and Data Matrix code carriers based on shape memory polymer (SMP) with a freely configurable steel ball type indenter and adjacent thermo-mechanical shape fixing gave notched, room temperature (23 °C) stable, temporary shapes with non-decipherable codes. The microscopic investigation of cryomicrotome sections unveiled indentation-related shape fixities of about 90 %. Independent of the selected two-dimensional code, the triggering of the SM effect resulted in sufficient shape recoveries to restore the code readability so that a maximum number of characters including 122 for a QR code (version 7) and 112 in case of a Data Matrix code (version 12) could be read with a scanning and decoding device. Due to the large number of difficult to copy shapes with on demand releasable information, SMPs may serve as viable information carriers for product and brand protection applications. KW - Shape memory polymer KW - QR code KW - Data matrix code KW - Freely configurable functionalization KW - Poly(ester urethane) KW - Programming KW - Thermo-responsiveness KW - Information carrier KW - Anti-counterfeiting KW - Brand protection KW - Smart label KW - Difficult-to-copy PY - 2014 UR - http://link.springer.com/chapter/10.1007/978-3-319-11340-1_3 SN - 978-3-319-11339-5 SN - 978-3-319-11340-1 DO - https://doi.org/10.1007/978-3-319-11340-1 SP - 25 EP - 35 PB - Springer AN - OPUS4-31576 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stelling, Karen A1 - Böllinghaus, Thomas A1 - Wolf, Martin A1 - Schöler, Annett A1 - Burkert, Andreas A1 - Isecke, Bernd ED - Böllinghaus, Thomas ED - Herold, H. T1 - Hot cracks as stress corrosion cracking initiation sites in laser welded corrosion resistant alloys N2 - Although hot cracks at weld surfaces of corrosion resistant alloys (CRAs) might provide access to respective aggressive media and thus, might provide the conditions for a local potential and pH drop, the interaction between hot cracking and corrosion phenomena has not been investigated up to the present. This particularly concerns the initiation of stress corrosion cracking inside such crevices. As a first approach to clarify the influence of hot cracks on corrosion resistance, considering particularly stress corrosion cracking, hot crack afflicted laser welds of three different CRAs have been subjected to a series of different corrosion tests. Besides the fact that the Drop Evaporation (DE) Test represents a more realistic procedure than standard immersion tests it turned out that hot cracks can obviously represent an initiation site of stress corrosion cracking in the austenitic stainless steel AISI 309 (German No. 1.4828). The susceptibility of such hot crack afflicted laser welds to stress corrosion cracking (SCC) significantly depends on temperature and chloride concentration of the test environment In comparison, the high nitrogen austenitic stainless steel AISI S 34565 (German No. 1.4565) did not exhibit any stress corrosion cracking associated with hot cracking. This material exhibited pitting corrosion and stress corrosion only in the base material. The Alloy 50 (German No. 2.4850), a Nickel based material, was susceptible to pitting corrosion, but showed no tendency towards stress corrosion cracking at all. T2 - International Workshop "Hot Cracking Phenomena in Welds" CY - Berlin, Germany DA - 2004-03-04 KW - Ni-Base Alloy KW - Stress corrosion Cracking KW - Hot Cracking KW - Laser Welding KW - Austenitic Stainless Steel KW - Drop Evaporation Test PY - 2005 SN - 3-540-22332-0 DO - https://doi.org/10.1007/3-540-27460-X_10 SP - 165 EP - 182 PB - Springer CY - Berlin AN - OPUS4-11852 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Karsten A1 - Baer, Wolfram A1 - Wossidlo, Peter A1 - Klingbeil, Dietmar ED - Neimitz, A. T1 - Investigations on the Dynamic Fracture Toughness Behaviour of Nodular Cast Iron T2 - 14th European Conference on Fracture ; 14th Biennial Conference on Fracture (14-ECF) CY - Cracow, Poland DA - 2002-09-08 PY - 2002 SN - 1-901537-37-4 VL - 2 SP - 501 EP - 508 PB - EMAS Publ. CY - Sheffield AN - OPUS4-1931 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Portella, Pedro Dolabella A1 - Bettge, Dirk A1 - Klinger, Christian A1 - Baer, Wolfram T1 - Über das Versagen von Strommasten im Münsterland (Nov. 2005) - der Beitrag der Metallographie und der Fraktographie T2 - 43. Metallographie-Tagung CY - Aachen, Deutschland DA - 2009-09-16 PY - 2009 SN - 978-3-88355-376-4 VL - 41 SP - 21 EP - 30 PB - Werkstoff-Informationsges. CY - Frankfurt/M. AN - OPUS4-20061 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Baer, Wolfram ED - Frenz, Holger ED - Grellmann, Wolfgang T1 - Experimentelle Ermittlung dynamischer Bruchzähigkeitswerte von ferritischem Gusseisen mit Kugelgraphit - Normung und aktuelle Datenbasis N2 - Der vorliegende Beitrag befasst sich mit dem internationalem Status der Ermittlung und Verfügbarkeit dynamischer Bruchzähigkeitswerte ferritischer Gusseisenwerkstoffe mit Kugelgraphit. Einleitend wird der Stand bruchmechanischer Prüfnormen hinsichtlich der Definition von Kennwerten bei dynamischer Beanspruchung analysiert. Zur dynamischen Bruchzähigkeit von ferritischem Gusseisen mit Kugelgraphit wurde eine Datenbasis erstellt, die den aktuellen veröffentlichten Stand auf diesem Gebiet widerspiegelt und eine Vielzahl unterschiedlicher von den Autoren verwendeter Kennwertdefinitionen enthält. Daher ist eine systematische Auswertung dieser Datenbasis sehr schwierig. Zur Veranschaulichung des temperaturabhängigen Bruchverhaltens wurde jedoch eine Reihe von zusammenfassenden graphischen Darstellungen erarbeitet. Anhand derer wird der Informationsgehalt einzelner Kennwertgruppen diskutiert und deren Aussagekraft für den Fall einer Bauteilsicherheitsbewertung eingeschätzt. T2 - Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung : Tagung Werkstoffprüfung 2008 CY - Berlin, Deutschland DA - 2008-12-04 KW - Dynamische Bruchzähigkeit KW - Review KW - Werkstoffkennwert KW - Duktiles Gusseisen KW - Dynamic fracture toughness KW - Review KW - Material characteristic KW - Ductile cast iron PY - 2008 SN - 978-3-00-026399-6 SN - 1861-8154 N1 - Serientitel: DVM-Bericht – Series title: DVM-Bericht IS - 642 SP - 275 EP - 282 PB - DVM CY - Berlin AN - OPUS4-18667 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Karsten A1 - Wossidlo, Peter A1 - Baer, Wolfram ED - Dlouhý, I. T1 - Fracture toughness behaviour of thick-walled nodular cast iron at elevated loading rates T2 - NATO Final Project Workshop on Fracture Resistance of Steels for Containers of Spent Nuclear Fuel ; NATO Final Project Workshop on Transferability of Fracture Mechanical Data CY - Brno, Czech Republic DA - 2001-11-05 KW - Ductile cast iron KW - Fracture mechanics KW - Specimen size effect KW - Loading rate effect PY - 2002 SN - 1-402-00794-9 SN - 1568-2609 N1 - Serientitel: NATO science series : Series 2, Mathematics, physics and chemistry – Series title: NATO science series : Series 2, Mathematics, physics and chemistry IS - 78 SP - 283 EP - 290 PB - Kluwer Academics Publishers CY - Dordrecht AN - OPUS4-1548 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Raedel, Martina A1 - Bücker, Michael T1 - Historic gold mosaics: composition and deterioration N2 - The appearance of gold mosaics has greatly changed over the last few centuries: in historical gold mosaics there is great variety in colour and shape, while monochrome gold mosaics prevail today. Gold mosaics consist of a triple-layer System, wherein the gold foil is sandwiched between two protective glass plates. KW - Gold mosaics KW - Composition KW - Deterioration KW - Damage mechanism KW - Sample analysis with SEM KW - Database of gold mosaics PY - 2012 SN - 978-1-907975-77-6 SN - 0039-3630 SN - 2047-0584 VL - 57 IS - Suppl. 1 SP - S372 EP - S373 PB - Maney Publishing AN - OPUS4-26964 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Raedel, Martina A1 - Sabel, Martin A1 - Bücker, Michael A1 - Unger, Brita ED - Meeks, N. ED - Cartwright, C. ED - Meek, A. ED - Mongiatti, A. T1 - ESEM-EDX analyses for the characterisation and reproduction of nineteenth-century gold tesserae N2 - Environmental scanning electron microscopy with energy dispersive X-ray analysis (ESEM-EDX) is a versatile working tool for the examination of gold tesserae as well as for the selection of suitable materials for their reproduction. In this paper, the ESEM-EDX analyses of original gold tesserae and their damage types are presented. These analytical results form the basis for further calculations of glass properties and experiments. These calculated values enable the determination of the relevant glass properties and allow us to choose the appropriate type of modern glass for further experiments. Subsequent experiments convert this knowledge into practice. By comparing the analytical results from the original glasses and the replicas the accuracy and precision will be shown. KW - Gold mosaics KW - Tesserae KW - ESEM-EDX KW - Glass analyses KW - Damage mechanism PY - 2012 SN - 978-1-904982-65-4 SP - 107 EP - 113 PB - Archetype publications Ltd. AN - OPUS4-27641 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kempel, Florian A1 - Schartel, Bernhard A1 - Hofmann-Böllinghaus, Anja A1 - Butler, K.M. A1 - Onate, E. A1 - Idelsohn, S.R. A1 - Rossi, R. A1 - Marti, J.M. T1 - Numerical simulation of polymeric materials in UL 94 test: Competition between gasification and melt flow/dripping T2 - Interflam 2010 - 12th International conference CY - Nottingham, UK DA - 2010-07-05 KW - Particle finite element method (PFEM) KW - UL 94 KW - Fire retardancy KW - PC/ABS KW - Melt flow KW - Dripping PY - 2010 SN - 978-0-9541216-5-5 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. VL - 1 SP - 721 EP - 730 PB - Interscience Communications CY - London, UK AN - OPUS4-21670 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böllinghaus, Thomas A1 - Schobbert, Helmut T1 - Laser Weld Metallurgy of Austenitic Stainless Steels T2 - Stainless Steel World Conference & Expo 2003 CY - Maastricht, The Netherlands DA - 2003-11-11 KW - Laser Welding KW - Hybrid Welding KW - Austenitic Stainless Steels KW - Weld Metallurgy KW - Primary Solidification Mode KW - Nitrogen Content KW - Hot Cracking KW - Stress Corrosion Cracking PY - 2003 SN - 90-73168-20-1 SP - 243 EP - 257 PB - KCI Publ. CY - Zutphen AN - OPUS4-2646 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Münster, C. A1 - Mente, Tobias A1 - Rhode, Michael A1 - Böllinghaus, Thomas ED - Sommitsch, C. ED - Enzinger, N. ED - Mayr, P. T1 - Modelling of hydrogen diffusion in power station steels and influence of experimental conditions on the determination of diffusion coefficients N2 - In the field of modelling hydrogen assisted cracking (HAC) phenomenon, hydrogen diffusivity is an important input parameter for numerical simulation. In terms of hydrogen diffusion coefficients, they have great impact on realistic assessment of the evolution of possible crack critical hydrogen concentrations. In addition, the chemical compositions of steels can have a strong effect on hydrogen diffusion. Unfortunately, literature provides a wide range of available hydrogen diffusion coefficients even for similar microstructures and equal temperatures. The scattering of the data can lead to significant deviations in the results of simulating the evolving hydrogen concentrations due to hydrogen uptake (by fabrication or service). Thus, the application of such data to crack-models or for component life tie predictions can be realized up to the present only by considering envelope curves of such value, corresponding to a work or bench case scenario, respectively. For improved reliability of numerical simulaitons, it is necessary to minimize the mentioned deviation of these data. Hence, this work focuses on the validation of hydrogen diffusion coefficients obtained from permeation experiments at room temperature. Two baintic steels with different alloying concepts were investigated, the creep-resistant 7CrMoVTiB10-10 and the reactor pressure vessel grade 20MnMoNi4-5. A numerical model is presented for simulation of the corresponding hydrogen diffusion during permeation experiments using the finite element software ANSYS. Three different diffusion coefficients (obtained from different common calculation methods) are considered and compared to numerical results. The vases of thes calculation methods are permeation transients which are a direct measure for hydrogen. The results of the simulated hydrogen diffusion coefficients show that only one procedure for calculation of diffusion coefficitnes is suitable in comparision to the experimental values. Thus, it is suggested to use this method for analysis of experimental results in case of hydrogen diffusion during permeation experiments. Furthermore, this work supplies validated values for the hydrogen diffusion coefficients of both steel grades. KW - Hydrogen KW - Diffusion Coefficient KW - Numerical Simulation KW - Permeation KW - Creep-resistant Steel KW - Pressure Vessel Steel PY - 2016 SN - 978-3-85125-490-7 SN - 2410-0544 SP - 435 EP - 457 PB - Technische Universität Graz CY - Graz AN - OPUS4-38917 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kannengießer, Thomas A1 - Cross, Carl Edward A1 - Böllinghaus, Thomas ED - Karl-Heinrich Grote, ED - Erik K. Antonsson, T1 - Modern Joining Technology - Weld Simulation PY - 2009 SN - 978-3-540-49131-6 IS - Part B / 7.4.8 SP - 706 EP - 723 PB - Springer AN - OPUS4-19047 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Baer, Wolfram A1 - Häcker, Ralf A1 - Börnert, Johannes ED - Pohl, M. T1 - Werkstoffcharakterisierung duktiler Gusseisenwerkstoffe bei dynamischer Zugbeanspruchung T2 - Tagung "Werkstoffprüfung 2004" CY - Neu-Ulm, Deutschland DA - 2004-11-25 PY - 2004 SN - 3-88355-337-9 SP - 55 EP - 60 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-7024 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Baer, Wolfram A1 - Bösel, Dieter A1 - Eberle, Arno A1 - Klingbeil, Dietmar ED - Jaroslav Pokluda, ED - Petr Lukás, ED - Pavel Sandera, ED - Ivo Dlouhý, T1 - On the development of key curve methods for the determination of dynamic crack resistance curves of ductile cast iron (DCI) T2 - 17th European Conference on Fracture (ECF17) - Multilevel Approach to Fracture of Materials, Components and Structures CY - Brno, Czech Republic DA - 2008-09-02 KW - Dynamic crack resistance curve KW - Key curve method KW - Ductile cast iron PY - 2008 SN - 978-80-214-3692-3 SP - 492 EP - 498 PB - VUTIUM Brno AN - OPUS4-17909 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rabin, Ira ED - Wandrey, T1 - Building a bridge from the Dead Sea Scrolls N2 - As part of the Qumran project conducted at the Federal Institute for Materials Research and Testing (BAM) in Berlin between 2007 and 2010, my colleagues and I developed a new, integrated methodology for determining the original and acquired properties of highly heterogeneous Dead Sea Scrolls. The purpose of this methodology is to help scholars determine the provenance of fragments of the scrolls and sort and compare them more easily than in the past. Since our measurements allowed us to differentiate between the minerals originating from the production processes and the sediments accrued during storage in the caves in Qumran, we were able to reconstruct the treatment of hides and discovered that at least two distinct parchmentproduction techniques co-existed at the beginning of the common era. The reconstruction of workmanship on animal hides in Antiquity raised doubts about the validity of the current definition of parchment, which is based on a production technique known from the Middle Ages. We hope that our current work will also help researchers understand the characteristic properties of gewil, qelaf and dukhsustos better.¹ The evolution and socio-geographic distribution of writing inks in late Antiquity and the early Middle Ages are the second focus of our investigative work at BAM. We use X-ray fluorescence analysis (XRF) to determine the chemical composition of inks and NIR reflectography for their typology. We are amply assisted in our ambitious enterprise by codicologists and palaeographers who have adopted our methodology and conduct field studies of their own. KW - Dead Sea Scrolls KW - Medieval Jewish manuscripts KW - Material analysis PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-435582 DO - https://doi.org/10.1515/9783110546422-0002 VL - 13 SP - 309 EP - 321 PB - de Gruyter CY - Berlin AN - OPUS4-43558 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Hensel, Christina A1 - Kreißig, Michael A1 - Schmidtchen, Ulrich A1 - Holtappels, Kai T1 - Unterfeuerung von Acetylendruckgasbehältern T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Sicherheit KW - Acetylen KW - Feuer KW - Wasserkühlung KW - Wärmeübertragung PY - 2010 SN - 978-3-89746-119-2 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. IS - Paper N-02 SP - 1 EP - 20 CY - Frankfurt/M. AN - OPUS4-22351 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Michael-Schulz, Heike A1 - Holtappels, Kai A1 - Wehrstedt, Klaus-Dieter A1 - Schröder, Volkmar T1 - Explosion in einer Erdgasspeicherbohrung T2 - 12. Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Deutschland DA - 2010-06-15 KW - Erdgas KW - Wasserstoffperoxid KW - Speicherbohrung KW - Reinigungsverfahren PY - 2010 SN - 978-3-9813550-1-7 SN - 0938-5533 SP - 15 EP - 18 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-21467 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gula, M. A1 - Holtappels, Kai A1 - Acikalin, Hatice Aydan A1 - Grasse, Dennis A1 - Steinbach, J. A1 - Schildberg, H.-P. ED - Suter, G. ED - de Rademaeker, E. T1 - Explosion of chemically unstable gases in large vessels at elevated initial conditions T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 479 EP - 482 CY - Brugge, Belgium AN - OPUS4-21440 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gula, Michal A1 - Holtappels, Kai A1 - Acikalin, Hatice Aydan A1 - Steinbach, J. A1 - Schildberg, H.-P. A1 - Kobiera, A. T1 - Zerfallsreaktionen chemisch instabiler Gase in Abhängigkeit vom Behältervolumen T2 - 9. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit", 6.-7.11.2008 CY - Köthen, Deutschland DA - 2008-11-06 KW - Lachgas KW - 1,2-Butadien KW - 1,3-Butadien KW - Zerfall KW - Volumenabhängigkeit PY - 2008 SN - 978-3-89746-099-7 SP - 1 EP - 14 PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-18369 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schnell, A. A1 - Müller, A. A1 - Rübner, Katrin A1 - Ludwig, H.-M. ED - Thomé-Kozmiensky, K.J. ED - Goldmann, D. T1 - Mineralische Bauabfälle als Rohstoff für die Herstellung leichter Gesteinskörnungen N2 - enden Mengen und die erreichten Recyclingquoten sind in den seit 1996 erscheinenden Monitoringberichten der Arbeitsgemeinschaft Kreislaufwirtschaftsträger Bau dargestellt. In dem 2011 erschienen Bericht wird ausgewiesen, dass im Jahr 2008 58,2 Millionen Tonnen Bauschutt bestehend aus Beton- und Mauerwerkabbruch anfielen. Die Recyclingquoten bewegen sich um die 70 Prozent. Das in stationären oder mobilen Anlagen aufbereitete Material wird hauptsächlich im Tief- und Landschaftsbau eingesetzt. Ein Einsatz im Hochbau erfolgt nur durch einzelne Unternehmen. Hierbei werden hauptsächlich rezyklierte grobe Gesteinskörnungen für Normalbeton aus Betonbruch gewonnen. Heterogener Mauerwerkbruch, der Wandbaustoffe, Mörtel, Putz, Fliesen und weitere Bestandteile enthält, oder die bei der Aufbereitung zwangsläufig entstehenden Feinfraktionen finden bisher keine Verwendung. KW - Bauschutt KW - Bauabfälle KW - Leichte Gesteinskörnung KW - Stoffliches Recycling KW - Granulate PY - 2012 SN - 978-3-935317-81-8 VL - 5 SP - 469 EP - 494 PB - TK-Verl. CY - Neuruppin AN - OPUS4-25709 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gula, Michal A1 - Steinbach, J. A1 - Holtappels, Kai A1 - Acikalin, Hatice Aydan A1 - Schildberg, H.-P. A1 - Kobiera, A. T1 - Apparative Einflüsse auf den explosionsartigen Zerfall von chemisch instabilen Gasen T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Explosion KW - Chemisch instabil KW - Volumeneinfluss PY - 2010 SN - 978-3-89746-119-2 IS - P-16 SP - 1 EP - 9 CY - Frankfurt/M. AN - OPUS4-22540 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weimann, Karin A1 - Müller, A. ED - Vázquez, E. T1 - Properties of building materials gained from wet-processed crushed concrete fines N2 - Although a large proportion of building rubble is already being recycled, most recycling applications, e.g. in roadbed foundations, can be considered as downcycling. This study is aimed at improving the material properties of crushed concrete fines by wet treatment, using a jig for density separation. Trial runs in a pilot plant with a flow rate between 0.45 and 0.65 t/h were conducted with two different materials (A and B). The materials were separated into heavy fraction, light fraction and finest fraction. Laboratory tests and tests for building materials were carried out on the output fractions and on the input materials. Laboratory tests showed an improvement of material properties such as loss by washing and content of binder matrix as well as water absorption for both materials A and B. The tests for building materials on mortar specimens showed that strength properties of specimens containing crushed concrete fines (heavy fraction) of type A were improved by wet treatment, but not for test specimens of material type B. Strength tests on concrete showed that a replacement of natural aggregates with wet-treated concrete fines up to 50 % had little effect on compressive strength, while untreated material exhibited a clearly lower compressive strength. T2 - RILEM 04 CY - Barcelona, Spain DA - 2004-11-08 KW - Crushed concrete fines KW - Wet treatment KW - Jig KW - Mortar KW - Recycled aggregates KW - Material properties PY - 2004 UR - http://congress.cimne.upc.es/rilem04/admin/Files/FilePaper/p216.pdf SN - 2-912143-52-7 N1 - Serientitel: RILEM proceedings – Series title: RILEM proceedings IS - 40 SP - 133 EP - 141 PB - RILEM Publ. CY - Bagneux AN - OPUS4-5320 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hahn, Oliver A1 - Denker, A. A1 - Merchel, S. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Wolff, T. ED - Armbruster, B. ED - Eilbracht, H. ED - Hahn, Oliver ED - Heinrich-Tamaska, O. T1 - Zerstörungsfreie Analyse von Metallartefakten - Eine Fallstudie N2 - Die naturwissenschaftliche Analyse historischer Materialen ermöglicht die Beantwortung kulturhistorischer Fragestellungen, die mit kunsthistorischen oder archäologischen Ansätzen allein nicht zu leisten sind. In dieser Studie wurden sechs römische Münzen mit unterschiedlich stark ausgeprägten Korrosionsschichten an unbehandelten und polierten Stellen mit vier zerstörungsfreien analytischen Methoden untersucht: Hoch- und Niederenergie Protonen Induzierter Röntgenemission (HE-/PIXE), Synchrotronstrahlungsinduzierte-Röntgenfluoreszenzanalyse (SY-RFA) und Mikro-Röntgenfluoreszenzanalyse (Mikro-RFA) mit einem mobilen Gerät. Aufgrund von Unterschieden in den Messbedingungen und dem Einfluss der Patina-Schichten auf diese ergaben sich nur für wenige Elemente Übereinstimmungen in den quantitativen Daten. Zur Validierung zukünftiger Messkampagnen mit verschiedenen Methoden sind daher Vergleichstudien unerlässlich. N2 - Investigations of physical properties and chemical composition of ancient materials generate important data for answering culture-historical questions that cannot be solved by art historical and archaeological methods alone. This contribution reports on the analysis of six Roman coins, with different degrees of corrosion layers in parts that were not handled or polished, using four non-destructive methods: low-energy particle-induced X-ray emission (PIXE, 2 MeV), high-energy PIXE (68 MeV), μ-X-ray fluorescence (XRF) spectrometry with a portable device and synchrotron-radiation induced XRF. Because of differences in the conditions needed for measurement and the influence of the layers of patina on these measurements, there were few elements where the quantitative data were in agreement. Thus comparative analyses are essential to validate future measurement projects using different methods. KW - Zerstörungsfreie Prüfung KW - Protoneninduzierte Röntgenemission KW - Röntgenfluoreszenzanalyse KW - Non-destructive testing KW - Particle-induced X-ray emission KW - X-ray fluorescence analysis PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-385702 SN - 978-3-9816751-5-3 VL - Berlin studies of the ancient world, Band 35 SP - 117 EP - 137 PB - Edition Topoi CY - Berlin AN - OPUS4-38570 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schröder, Volkmar A1 - Holtappels, Kai T1 - Safety characteristics of hydrogen at elevated pressures and temperatures T2 - International ESMG Symposium 2005 "Process Safety and Industrial Explosion Protection" CY - Nuremberg, Germany DA - 2005-10-11 KW - Hydrogen technologies KW - Hydrogen-oxygen mixtures KW - Safety characteristics KW - Elevated pressures and temperatures PY - 2005 SN - 3-9807567-4-2 SP - Session 8 "Explosion protection" PB - European Safety Management Group CY - Nürnberg AN - OPUS4-11101 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thöns, Sebastian A1 - Faber, M.H. A1 - Rücker, Werner A1 - Rohrmann, Rolf ED - Martorell, S. ED - et al., T1 - Assessment and monitoring of reliability and robustness of offshore wind energy converters T2 - ESREL 2008 CY - Valencia, Spain DA - 2008-09-22 KW - Structural reliability KW - Robustness KW - Monitoring KW - Risk KW - Wind energy converter PY - 2008 SN - 978-0-415-48513-5 SP - 1567 EP - 1572 PB - Taylor & Francis CY - London, UK AN - OPUS4-18565 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Holtappels, Kai T1 - COMSOL Multiphysics® as a Tool to Increase Safety in the Handling of Acetylene Cylinders Involved in Fires N2 - In this paper a mathematical model for predicting the heating-up of an acetylene cylinder involved in a fire is presented. In the simulations polynomial functions were used to describe the temperature dependency of the thermal properties of the cylinder interior, which is a complex system composed by a solid porous material, a solvent and acetylene dissolved in it. Model equations covered heat conduction in the cylinder interior and at its walls, while the fire surrounding the cylinder was simulated by solving the coupled heat transfer and the momentum equation. Results of the calculations and the effects of some model parameters are discussed. T2 - COMSOL Conference 2009 CY - Milan, Italy DA - 2009-10-14 KW - Acetylene KW - Safety KW - Heat transfer KW - Momentum transfer PY - 2009 SN - 978-0-9825697-0-2 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. SP - 1 EP - 5 AN - OPUS4-20261 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Holtappels, Kai A1 - Schröder, Volkmar A1 - Kobiera, A. A1 - Wolanski, P. A1 - Braithwaite, M. A1 - Pasman, H. T1 - Gas explosion safety characteristics and anomalies at unusual conditions T2 - 12th International Symposium on Loss and Safety Promotion in the Process Industries CY - Edinburgh, Scotland, UK DA - 2007-05-22 KW - Process safety KW - Hydrocarbon oxidation KW - Combustion phenomena KW - Combustion regions PY - 2007 SN - 978-0-85295-508-6 SN - 0307-0492 N1 - Serientitel: IChemE symposium series – Series title: IChemE symposium series IS - 153 SP - 1 EP - 7(?) PB - IChemE CY - Rugby, Warwickshire AN - OPUS4-14849 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schröder, Volkmar A1 - Holtappels, Kai A1 - Liebner, Christian T1 - Hydrocarbon oxidation processes at non-atmospheric conditions - EC-project SAFEKINEX N2 - The project will develop test methodology for explosion indices al non-ambient conditions, a validated data base on them and on many other explosion indices as a function of pressure and temperature. Further, models will be developed, enabling prediction of behaviour of reactive systems and predicting explosion parameters. T2 - 3rd International ESMG Symposium: Process Safety and Industrial Explosion Protection CY - Nuremberg, Germany DA - 2004-03-16 KW - Gas explosion KW - Safety characteristics KW - Oxidation kinetics KW - Explosion limits KW - Self ignition PY - 2004 SN - 3-9807567-3-4 SP - 1(?) EP - 10(?) PB - European Safety Management Group CY - Hamm AN - OPUS4-5783 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Holtappels, Kai A1 - Dietlen, Siegmund A1 - Stickling, J. A1 - Schönbucher, A. T1 - Stabilitätsgrenzdrücke wichtiger instabiler Gase bzw. Gasgemische T2 - DECHEMA-Jahrestagungen '99 ; Kolloquium von BAM-II "Chemische Sicherheitstechnik" CY - Wiesbaden, Deutschland DA - 1999-04-27 PY - 1999 SN - 3-89746-001-7 VL - 2 SP - 118 CY - Frankfurt am Main AN - OPUS4-1715 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mittermayr, F. A1 - Gluth, Gregor A1 - Grengg, C. A1 - Garbe, U. A1 - Jiang, G. ED - Jiang, G. T1 - Concrete corrosion characterization using advanced microscopic and spectroscopic techniques N2 - The aim of this chapter is to give an overview of basic and advanced state-of-the-art microstructural and spectroscopic analytics to investigate inorganic material corrosion in the context of biochemically aggressive sewers. The chapter covers optical methods, electron beam, X-ray and neutron techniques (SEM, MLA, XRF, XRD, CT, Neutron radiography and tomography), and spectroscopic methods (MAS-NMR, FT-IR, and Raman). For each technique, a short section on the fundamental scientific background of the method precedes and examples of data output from the latter in respect to the corrosion of cementitious materials including reinforced concrete is presented. KW - Cement KW - Concrete KW - Deterioration KW - Spectroscopy KW - Microscopy PY - 2023 SN - 978-3-031-29940-7 SN - 978-3-031-29941-4 DO - https://doi.org/10.1007/978-3-031-29941-4_4 SP - 59 EP - 97 PB - Springer CY - Cham AN - OPUS4-57423 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klingbeil, Dietmar A1 - Eberle, Arno A1 - Baer, Wolfram A1 - Wossidlo, Peter A1 - Häcker, Ralf ED - François, D. ED - Pineau, A. T1 - The calculation of dynamic JR-curves from 2D and 3D finite element analyses of a charpy test using a rate-dependent damage model T2 - Charpy Centenary Conference CY - Poitiers, France DA - 2001-01-02 PY - 2001 SN - 0-08-043970-5 SN - 1566-1369 N1 - Serientitel: ESIS publication – Series title: ESIS publication IS - 30 SP - 403 EP - 410 PB - Elsevier CY - Amsterdam AN - OPUS4-1928 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Baer, Wolfram A1 - Klingbeil, Dietmar ED - Fuentes, M. T1 - Experimental and numerical investigations of the failure behaviour of components by application of fracture and damage mechanics T2 - 13th European Conference on Fracture CY - San Sebastián, Spain DA - 2000-09-06 PY - 2000 SN - 0-08-043699-4 SN - 1566-1369 N1 - Serientitel: ESIS publication – Series title: ESIS publication IS - 26 SP - 1(?) EP - 8(?) PB - Elsevier CY - Amsterdam AN - OPUS4-840 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Baer, Wolfram A1 - Klingbeil, Dietmar A1 - Häcker, Ralf A1 - Wossidlo, Peter A1 - Aurich, Dietmar ED - Neimitz, A. T1 - Investigations on the Assessment of the Toughness Behaviour in the upper Ductile-to-Brittle Transition Range T2 - 14th European Conference on Fracture ; 14th Biennial Conference on Fracture (ECF-14) CY - Cracow, Poland DA - 2002-09-08 PY - 2002 SN - 1-901537-38-2 VL - 3 SP - 185 EP - 192 PB - EMAS Publ. CY - Sheffield AN - OPUS4-1926 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Baumgartner, S. A1 - Fürtler-Leitzenberger, I. A1 - Drs, E. A1 - Molinelli, A. A1 - Krska, R. A1 - Immer, U. A1 - Schmitt, K. A1 - Bremer, M. A1 - Haasnoot, W. A1 - Danks, C. A1 - Romkies, V. A1 - Reece, P. A1 - Wilson, P. A1 - Kiening, M. A1 - Weller, Michael G. A1 - Niessner, R. A1 - Corsini, E. A1 - Mendonca, S. ED - Darsa P. Siantar, ED - Mary W. Trucksess, ED - Peter M. Scott, ED - Eliot M. Herman, T1 - European survey for hidden allergens in food: A case study with peanut and hazelnut KW - Allergene KW - Erdnuß KW - Haselnuß KW - Allergentest KW - Lebensmittel KW - Kontamination PY - 2008 SN - 978-0-8412-6954-5 N1 - Serientitel: ACS Symposium Series – Series title: ACS Symposium Series SP - 370 EP - 381 AN - OPUS4-19052 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Schulz, Ulrich A1 - Mechtel, M. A1 - Klimmasch, T. A1 - Klinke, E. T1 - The action of outdoor weathering on the scratch resistance and reflow ability of automotive clearcoats T2 - 7th Nürnberg Congress CY - Nuremberg, Germany DA - 2003-04-07 PY - 2003 SN - 3-87870-146-2 VL - 2 SP - 295 EP - 309 PB - Vincentz CY - Hannover AN - OPUS4-2820 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schulz, Ulrich A1 - Wachtendorf, Volker A1 - Geburtig, Anja ED - Reichert, T. T1 - The influence of mildew growth on automotive coatings on the results of outdoor weathering T2 - 1st European weathering symposium - Natural and artificial ageing of polymers CY - Prague, Czech Republic DA - 2003-09-25 PY - 2003 SN - 3-9808382-5-0 VL - 5/2004 IS - Session 7 SP - 357 EP - 374 PB - DWS Werbeagentur und Verlag GmbH CY - Pfinztal AN - OPUS4-21348 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Wachtendorf, Volker A1 - Geburtig, Anja A1 - Trubiroha, Peter ED - Czichos, Horst ED - Saito, T. ED - Smith, L. T1 - Materials and the environment KW - Weathering KW - Total material requirement KW - Polymer PY - 2011 SN - 978-3-642-16640-2 DO - https://doi.org/10.1007/978-3-642-16641-9 SP - Chapter 15.1, 845 EP - 860 PB - Springer CY - Berlin, Heidelberg AN - OPUS4-24154 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kromm, Arne ED - Lexow, J. ED - Kishi, T. ED - Kitagawa, M. ED - Böllinghaus, Thomas T1 - Controlling welding residual stresses by means of alloy design N2 - Residual stresses are a major consequence of many manufacturing processes. In particular, welding residual stresses can affect the processing properties and durability of a component. Especially when welding high strength steels in complex structures, showing high restraint intensities, tensile residual stresses can easily reach the level of the yield strength and cause cracking. Therefore, in this study approaches have been evaluated to control the level and distribution of residual stresses already during the welding process using suitable alloy concepts with reduced phase transformation temperatures. This issue affects primarily the mechanisms between transformation temperature, transformation kinetics and resulting residual stresses. The present work includes discussion and approaches, how these phenomena can be evaluated using an appropriate in-situ monitoring. For that purpose, investigations using high energy synchrotron diffraction have been carried out. Initially, diffraction analyses have been made during simple thermal cycles, focusing on the observation of phase transformation kinetics, i.e. transformation temperatures and temperature dependent phase formation and contents. Furthermore, welding experiments incorporating an external shrinkage restraint show how the stress formation during cooling is influenced by superimposed mechanical and thermal impacts compared to conventional filler material. The results demonstrate that residual stresses can be effectively controlled by means of an adjusted alloy design. Prior to experimental results a review is presented including the mechanisms of stress reduction due to phase transformation during welding. Beside this the progress in designing special alloys for controlling residual stresses is reflected. KW - Residual stress KW - Martensite KW - Phase transformation KW - Welding PY - 2012 SN - 978-3-642-23347-0 SN - 978-3-642-23348-7 DO - https://doi.org/10.1007/978-3-642-23348-7 SP - 23 EP - 33 PB - Springer CY - Berlin Heidelberg AN - OPUS4-25520 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja A1 - Trubiroha, Peter A1 - Schulz, Ulrich T1 - Artificial weathering including acidic deposition T2 - 3rd European Weathering Symposium CY - Krakow, Poland DA - 2007-09-12 KW - Spectral sensitivity KW - Weathering KW - UV KW - Action spectra KW - Activation spectra KW - Stabilizer KW - Spektrale Empfindlichkeit KW - Bewitterung KW - Aktivierungsspektrum KW - Wirkungsspektrum KW - Stabilisator PY - 2007 SN - 978-3-9810472-3-3 VL - 8 SP - 487 EP - 500 CY - Pfinztal AN - OPUS4-15923 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schulz, Ulrich A1 - Geburtig, Anja A1 - Crewdson, M. A1 - Stephenson, J. ED - Reichert, T. T1 - The Southern Florida Acid Rain Test T2 - 2nd European Weathering Symposium - Natural and Artificial Ageing of Polymers CY - Gothenburg, Sweden DA - 2005-06-16 KW - Weathering Reference Materials PY - 2005 SN - 3-9808382-9-3 VL - 6 SP - 49 EP - 62 PB - Gesellschaft für Umweltsimulation CY - Pfinztal AN - OPUS4-10375 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja A1 - Braun, Ulrike A1 - Schartel, Bernhard A1 - Trubiroha, Peter T1 - Influence of weathering on the stability of flame retardancy in polymeric materials for outdoor use T2 - 4th European weathering symposium - Natural and artificial ageing of polymers CY - Budapest, Hungary DA - 2009-09-16 KW - Flame retardancy KW - Weathering KW - Stability KW - Polymeric material KW - Outdoor PY - 2009 SN - 978-3-9810472-8-8 IS - CEEES Publication No. 11 SP - 313 EP - 326 PB - DWS Werbeagentur und Verlag GmbH CY - Karlsruhe AN - OPUS4-20060 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - Materials and the Environment KW - Ecoefficiency KW - Weathering exposure KW - Photodegradation KW - Polymers PY - 2006 SN - 978-3-540-20785-6 IS - Part D / 15.1 SP - 789 EP - 803 PB - Springer CY - Berlin AN - OPUS4-13733 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja ED - Reichert, T. T1 - Using chemiluminescence as sensitive detector of early stages weathering effects on car coatings to shorten weathering tests T2 - 2nd European Weathering Symposium "Natural and Artificial Ageing of Polymers" CY - Gothenburg, Sweden DA - 2006-06-16 KW - Chemiluminescence KW - Artificial weathering KW - Natural weathering KW - Automotive KW - Coating KW - Weathering KW - ADF test KW - Chemilumineszenz KW - Künstliche Alterung KW - Natürliche Alterung KW - Auto KW - Lack PY - 2005 SN - 3-9808382-9-3 VL - 6 SP - 63 EP - 73 PB - Gesellschaft für Umweltsimulation CY - Pfinztal AN - OPUS4-7623 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Schulz, Ulrich ED - Ziegahn, K.-F. T1 - Simulation von Kratzeinwirkungen am Beispiel bewitterter Polymerwerkstoffe T2 - 32. Jahrestagung der GUS, Gesellschaft für Umweltsimulation CY - Pfinztal bei Karlsruhe, Deutschland DA - 2003-03-26 PY - 2003 SN - 3-9808382-1-8 SP - 149 EP - 164 PB - GUS (Gesellschaft für Umweltsimulation) CY - Pfinztal (Berghausen) AN - OPUS4-2819 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Schulz, Ulrich A1 - Ullmann, F. T1 - Weathering Resistance of Hardcoats for Polycarbonate T2 - 8th Nürnberg Congress "Creative Advances in Coatings Technology" CY - Nuremberg, Germany DA - 2005-04-25 KW - Hardcoat KW - Polycarbonate KW - Weathering PY - 2005 SN - 3-87870-160-8 VL - 2 SP - 255 EP - 262 PB - Vincentz CY - Hannover AN - OPUS4-10303 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - The Principle of Reciprocity and its Limits T2 - 3rd European Weathering Symposium CY - Krakow, Poland DA - 2007-09-12 KW - Spectral sensitivity KW - Weathering KW - UV KW - Action spectra KW - Activation spectra KW - Stabilizer KW - Spektrale Empfindlichkeit KW - Bewitterung KW - Aktivierungsspektrum KW - Wirkungsspektrum KW - Stabilisator PY - 2007 SN - 978-3-9810472-3-3 VL - 8 SP - 243 EP - 258 CY - Pfinztal AN - OPUS4-15925 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - Referenzmaterialien für Bewitterungsprüfungen T2 - 32. Jahrestagung der GUS, Gesellschaft für Umweltsimulation CY - Pfinztal bei Karlsruhe, Deutschland DA - 2003-03-26 KW - Referenzmaterialien KW - Bewitterung PY - 2003 SN - 3-9808382-1-8 SP - 61 EP - 72 PB - GUS CY - Pfinztal (Berghausen) AN - OPUS4-3360 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja A1 - Trubiroha, Peter ED - Jonathan W. Martin, ED - Rose A. Ryntz, ED - J. Chin, ED - Ray A. Dickie, T1 - Chemiluminescence detection: Principles, chances and limitations for the shortening of weathering tests T2 - 4th International Symposium on Service Life Prediction CY - Key Largo, FL, USA DA - 2006-12-03 KW - Chemiluminescence KW - Weathering KW - Quantum efficiency KW - Accelerated test KW - Automotive coating KW - PE Chemilumineszenz KW - Bewitterung KW - Quantenausbeute KW - Beschleunigter Test KW - Automobillacke PY - 2008 SN - 978-0-387-84875-4 SP - 309 EP - 326 PB - Springer AN - OPUS4-18245 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Trubiroha, Peter A1 - Wachtendorf, Volker A1 - Geburtig, Anja ED - Ziegahn, K.-F. T1 - Beispiele für die Nutzung des Energietransports durch langwellige (thermische) Strahlung T2 - 35. Jahrestagung der GUS 2006 - Umwelteinflüsse erfassen, simulieren, bewerten CY - Pfinztal, Deutschland DA - 2006-03-22 PY - 2006 SN - 3-9810472-0-6 SP - 205 EP - 214 PB - DWS Werbeagentur und Verlag GmbH CY - Pfinztal AN - OPUS4-21347 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - Improved Evaluation of Activation Spectra Determined by the Filter Technique T2 - 3rd European Weathering Symposium CY - Krakow, Poland DA - 2007-09-12 KW - Spectral sensitivity KW - Weathering KW - UV KW - Action spectra KW - Activation spectra KW - Stabilizer KW - Spektrale Empfindlichkeit KW - Bewitterung KW - Aktivierungsspektrum KW - Wirkungsspektrum KW - Stabilisator PY - 2007 SN - 978-3-9810472-3-3 VL - 8 SP - 349 EP - 358 CY - Pfinztal AN - OPUS4-15924 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - Der Einfluss von Feuchte und Nässe bei der Bewitterung T2 - 36. Jahrestagung der GUS 2007 CY - Pfinztal bei Karlsruhe, Deutschland DA - 2007-03-14 KW - Spectral sensitivity KW - Weathering KW - UV KW - Action spectra KW - Activation spectra KW - Stabilizer KW - Spektrale Empfindlichkeit KW - Bewitterung KW - Aktivierungsspektrum KW - Wirkungsspektrum KW - Stabilisator PY - 2007 SN - 978-3-9810472-1-9 VL - 36 SP - 247 EP - 256 CY - Pfinztal AN - OPUS4-14758 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - Systematisierung der Alterungsvorgänge bei der Bewitterung von Polymerwerkstoffen T2 - 38. Jahrestagung der GUS CY - Stutensee-Blankenloch/Karlsruhe, Deutschland DA - 2009-03-18 KW - Witterungsbeständigkeit KW - Photochemische Alterung PY - 2009 SN - 978-3-9810472-7-1 SP - 51 EP - 60 CY - Pfinztal (Berghausen) AN - OPUS4-19162 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - Correlations in weathering results T2 - 4th European weathering symposium - Natural and artificial ageing of polymers CY - Budapest, Hungary DA - 2009-09-16 KW - Witterungsbeständigkeit KW - Korrelation KW - Künstliche Bewitterung KW - Artificial weathering PY - 2009 SN - 978-3-9810472-8-8 IS - Publication 11 SP - 251 EP - 261 PB - DWS Werbeagentur und Verlag GmbH CY - Karlsruhe AN - OPUS4-20020 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja ED - Moeller, E. T1 - Entwicklung künstlicher Bewitterungstests für Lacke und Beschichtungen T2 - GfKORR-Seminar Korrelation von Labortests mit Praxisbedingungen im Automobilbereich CY - Frankfurt am Main, Deutschland DA - 0008-02-15 KW - Künstliche Bewitterung KW - Freibewitterung KW - Verkürzung KW - Beschleunigung KW - Korrelation PY - 2006 SN - 3-935406-27-4 SP - 102 EP - 111 PB - GfKORR CY - Frankfurt am Main AN - OPUS4-12065 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - Aussagekraft von Korrelationskoeffizienten T2 - 38. Jahrestagung der GUS CY - Stutensee-Blankenloch/Karlsruhe, Deutschland DA - 2009-03-18 KW - Witterungsbeständigkeit KW - Korrelation KW - Künstliche Bewitterung PY - 2009 SN - 978-3-9810472-7-1 SP - 61 EP - 70 CY - Pfinztal (Berghausen) AN - OPUS4-19161 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja A1 - Trubiroha, Peter T1 - Principles and Limitations in the Acceleration of Artificial Weathering Tests T2 - 6th International Paint, Varnish, Ink & Auxiliary Products Industry Congress & Exhibition, 2006 Paint CY - Istanbul, Turkey DA - 2006-05-17 KW - Bewitterung KW - Verkürzung KW - Zeitraffung KW - Weathering KW - Shortening KW - Time-lapse PY - 2006 SN - 994-489125-8 SP - 48 EP - 54 PB - TMMOB CY - Istanbul AN - OPUS4-12391 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja A1 - Trubiroha, Peter ED - Ziegahn, K.-F. T1 - Grundsätzliches zur Verkürzung von Bewitterungstests durch künstliche Bewitterung T2 - 35. Jahrestagung der GUS 2006 - Umwelteinflüsse erfassen, simulieren, bewerten CY - Pfinztal, Deutschland DA - 2006-03-22 PY - 2006 SN - 3-9810472-0-6 SP - 165 EP - 175 PB - DWS Werbeagentur und Verlag GmbH CY - Pfinztal AN - OPUS4-21345 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - Reference materials for weathering tests T2 - 1st European Weathering Symposium (EWS-1) ; 23rd Colloquium of Danubian Countries on Natural and Artificial Ageing of Polymers CY - Prague, Czech Republic DA - 2003-09-25 KW - Referenzmaterialien KW - Bewitterung PY - 2003 SN - 3-9808382-3-4 SP - 1(?) EP - 11(?) PB - Gesellschaft für Umweltsimulation e.V. CY - Pfinztal AN - OPUS4-2882 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - Determination of the spectral response of polymers T2 - 3rd Service Life Symposium CY - Sedona, AZ, USA DA - 2004-02-01 KW - Spectral sensitivity KW - Weathering KW - UV KW - Action spectra KW - Activation spectra KW - Stabilizer KW - Spektrale Empfindlichkeit KW - Bewitterung KW - Aktivierungsspektrum KW - Wirkungsspektrum KW - Stabilisator PY - 2005 SN - 0-934010-60-9 SP - 241 EP - 253 PB - Federation of Societies for Coatings Technology CY - Philadelphia AN - OPUS4-13711 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja A1 - Trubiroha, Peter T1 - Grundsätzliches zur Verfahrensauswahl bei der künstlichen Bestrahlung und Bewitterung KW - Bewitterung KW - Bestrahlung KW - Fluoreszenzlampe KW - Xenonlampe PY - 2008 SN - 978-3-9810472-6-4 SP - 109 EP - 121 AN - OPUS4-17338 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker ED - Zieghahn, K. T1 - Grundsätzliches zur Lebensdauervorhersage in der Bewitterung T2 - Umwelteinflüsse erfassen, simulieren, bewerten : 34. Jahrestagung der GUS 2005 CY - Pfinztal bei Karlsruhe, Deutschland DA - 2005-03-02 KW - Lebensdauer KW - Bewitterung KW - Polymere PY - 2005 SN - 3-9808382-6-9 SP - 159 EP - 168 PB - GUS (Gesellschaft für Umweltsimulation) CY - Pfinztal AN - OPUS4-7141 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter ED - Ziegahn, K.-F. T1 - Ermittlung der Beanspruchung bei Bewitterungsversuchen - Referenzmaterialien T2 - 33. Jahrestagung der GUS 2004 - Umwelteinflüsse erfassen, simulieren, bewerten CY - Pfinztal, Deutschland DA - 2004-03-17 PY - 2004 SN - 3-9808382-4-2 SP - 165 EP - 175 PB - DWS Werbeagentur und Verlag GmbH CY - Pfinztal AN - OPUS4-21346 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gründer, Klaus-Peter A1 - Geburtig, Anja T1 - Optical methods in single crystal deformation analysis at high temperature T2 - International Symposium on Photonics in Measurement CY - Aachen, Germany DA - 2002-06-11 PY - 2002 SN - 3-18-091694-X SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1694 SP - 137 EP - 142 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-1447 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Alterungsvorgänge durch Bewitterung bei Beschichtungen und deren Untersuchung und Prüfung T2 - 42. Fortbildungskurs SAH - Holzoberflächen in der Fassadengestaltung CY - Weinfelden, Schweiz DA - 2010-10-26 KW - Bewitterung KW - Alterung KW - Holz PY - 2010 SN - 978-3-906703-26-8 SP - 29 EP - 38 CY - Zürich, Schweiz AN - OPUS4-22601 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Chancen und Grenzen der Verkürzung von Bewitterungstests durch empfindliche Chemilumineszenz-Detektion N2 - Eine Verkürzung der Dauer von Bewitterungsversuchen kann durch eine empfindlichere Detektion der Bewitterungseffekte erreicht werden als sie konventionell benützt wird. Eine solche besonders empfindliche Detektionsmethode stellt die Chemilumineszenz dar. Die Verkürzung durch empfindliche Detektion muss jedoch gleichzeitig der Bedingung genügen, ausreichend gute Rangkorrelation zu Bewitterungseffekten unter Anwendungsbedingungen zu zeigen. In diesem Spannungsfeld sollen die Möglichkeiten der Chemiluminiszenz-Detektion beleuchtet werden. T2 - DFO Qualitätstage 2008 CY - Fürth, Deutschland DA - 2008-10-07 KW - Chemilumineszenz KW - Bewitterung KW - Verkürzung KW - empfindlicher Nachweis PY - 2008 SN - 978-3-89943-072-1 SP - 105 EP - 120 PB - DFO CY - Fürth AN - OPUS4-18328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja ED - Ziegahn, K.-F. T1 - Zusammenhang von molekularen Alterungsvorgängen und beobachtbaren Eigenschaftsänderungen bei der Bewitterung von Polymeren T2 - 39. Jahrestagung der GUS 2010 - Umweltflüsse erfassen, simulieren, bewerten CY - Stutensee, Deutschland DA - 2010-03-17 KW - Bewitterung KW - Alterung KW - Eigenschaftsänderung KW - Korrelation PY - 2010 SN - 978-3-9813136-0-4 SP - 45 EP - 55 PB - DWS Werbeagentur und Verlag GmbH CY - Pfinztal AN - OPUS4-21047 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Untersuchung der Veränderung der Kratzfestigkeit und Reflow-Fähigkeit von Karosserie-Klarlacken als Folge der Auslagerung in Jacksonville und nachgestellter Laborbewitterung T2 - DFO Qualitätstage 2005 - Moderne Verfahren zur Oberflächencharakterisierung CY - Berlin, Deutschland DA - 2005-10-25 KW - Bewitterung KW - Kratzfestigkeit KW - Kratzbeständigkeit KW - Reflow KW - Weißlichtinterferenz KW - Rauhigkeit PY - 2005 SN - 3-89943-062-X SP - 88 EP - 102 PB - DFO CY - Düsseldorf AN - OPUS4-11216 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lüthi, A. A1 - Fäh, D. A1 - Wachtendorf, Volker A1 - Geburtig, Anja ED - Reichert, T. ED - Halafka, S. T1 - Recent Proposals for Weathering Reference Materials as Discussed by DIN and VDA T2 - 1st European Weathering Symposium (EWS-1) ; 23rd Colloquium of Danubian Countries on Natural and Artificial Ageing of Polymers CY - Prague, Czech Republic DA - 2003-09-25 KW - Reference material KW - ORWET KW - Crack KW - Climatic KW - ADF test KW - Spectral sensitivity KW - Referenzmaterial KW - Riss KW - Klimatische Beständigkeit PY - 2003 SN - 3-9808382-3-4 SP - 1(?) EP - 12(?) PB - Gesellschaft für Umweltsimulation e.V. CY - Pfinztal AN - OPUS4-2682 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - Two New Weathering Reference Materials - Monitors for Weathering Exposure T2 - 3rd Service Life Symposium CY - Sedona, AZ, USA DA - 2004-02-01 KW - Weathering KW - Reference material KW - WRM KW - UV KW - Radiance KW - Crack KW - JIS K7200 KW - Humidity KW - Bewitterung KW - Referenzmaterial KW - Riss KW - Bestrahlung KW - Luftfeuchte PY - 2005 SN - 0-934010-60-9 SP - 253 EP - 258 PB - Federation of Societies for Coatings Technology CY - Philadelphia AN - OPUS4-13712 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter A1 - Takane, Y. T1 - UV-sensitive Weathering Reference Materials T2 - 2nd European Weathering Symposium - Natural and Artificial Ageing of Polymers CY - Gothenburg, Sweden DA - 2005-06-16 KW - Weathering Reference Materials PY - 2005 SN - 3-9808382-9-3 VL - 6 SP - 145 EP - 154 PB - Gesellschaft für Umweltsimulation CY - Pfinztal AN - OPUS4-10376 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Falkenhagen, Jana A1 - Weidner, Steffen ED - Barner-Kowollik, C. ED - Gründling, T. ED - Falkenhagen, Jana ED - Weidner, Steffen T1 - Hyphenated techniques N2 - Hyphenation of techniques has become a versatile tool in polymer analysis. It has been demonstrated that the complexity and heterogeneity of modern polymers and copolymers, in particular, could only be determined by a combination of several methods. With this regard, a chromatographic separation in various thermodynamic modes combined with mass spectral identification of polymer species provides new insights in polymer synthesis, modification, and degradation. Both methods are widely complementary and can therefore often compensate each other’s drawbacks. The development of suitable coupling interfaces, the introduction of AP devices, and an increasing application of ESI pushed polymer analysis toward new regions. Future developments in the field of MS detectors, lasers and software, as well new pressure-stable stationary chromatographic phases will aid in increasing the importance and acceptance of LC-MS coupling methods and will enable new applications in sophisticated polymer analysis. KW - MALDI KW - Chromatography KW - Coupling techniques PY - 2012 SN - 978-3-527-32924-3 SN - 978-3-527-64182-6 DO - https://doi.org/10.1002/9783527641826.ch7 SP - 209 EP - 235 PB - Wiley-VCH CY - Weinheim AN - OPUS4-26395 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mahoney, C. M. A1 - Weidner, Steffen ED - Barner-Kowollik, C. ED - Gründling, T. ED - Falkenhagen, Jana ED - Weidner, Steffen T1 - Surface analysis and imaging techniques N2 - Over the past couple of decades, the field of imaging mass spectrometry has taken a quantum leap in the area of organic, polymeric, and biological analysis. SIMS, originally developed for characterization of inorganic materials and semiconductors, is now used on a regular basis for the surface and in-depth characterization of polymers and other soft samples. The recent development of cluster sources over the past 15 years has resulted in a major paradigm shift in SIMS, moving from 2-D to 3-D analysis in polymeric materials. MALDIs recent development of imaging methodology has made an overwhelming impact in the biological community. The ability to detect high-mass proteins and other organic compounds remains unrivaled. Furthermore, some of these instruments can now be operated under ambient pressure conditions, thus making it a much more versatile tool. Although this is a time of expansion in the entire field of surface mass spectrometry, DESI and PDI methods are right at the beginning of their growth curve. It is expected, therefore, that significant developments will be observed in the coming years as these techniques mature. It has been said that these methods represent the future of desorption mass spectrometry. This is very likely to be true. KW - Surface analysis KW - Imaging techniques PY - 2012 SN - 978-3-527-32924-3 SN - 978-3-527-64182-6 DO - https://doi.org/10.1002/9783527641826.ch6 SP - 149 EP - 207 PB - Wiley-VCH CY - Weinheim AN - OPUS4-26396 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühn, Gerhard A1 - Ghode, Archana A1 - Weidner, Steffen A1 - Retzko, Iris A1 - Unger, Wolfgang A1 - Friedrich, Jörg Florian ED - Mittal, K. L. T1 - Chemically well-defined surface functionalization of polyethylene and polypropylene by pulsed plasma modification followed by grafting of molecules T2 - 2nd International Symposium on Polymer Surface Modification: Relevance to Adhesion CY - Newark, NJ, USA DA - 1999-05-24 KW - Plasma modification KW - Chemical conversion of functional groups KW - Spacers KW - Polypropylene KW - Polyethylene PY - 2000 SN - 90-6764-327-0 VL - 2 SP - 45 EP - 64 PB - VSP CY - Utrecht AN - OPUS4-6975 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Ralph-Peter A1 - Heinemann, M. A1 - Falkenhagen, Jana A1 - Hartmann, A. A1 - Friedrich, Jörg Florian A1 - Fritz, H.-G. ED - Fritz, H. ED - Eisenbach, C. T1 - Charakterisierung biologisch abbaubarer Homo- und Copolyester / Characterisation of biodegradable Homo- and Copolyesters T2 - 19. Stuttgarter Kunststoff-Kolloquium 2005 CY - Stuttgart, Deutschland DA - 2005-03-09 KW - MALDI-TOF-MS KW - Bioabbaubare Polyester KW - Flüssigchromatographie KW - Methodenkopplung KW - Biodegradable polyesters KW - Liquid chromatography KW - Coupling of analytical methods PY - 2005 SN - 3-00-015246-6 SP - 5/P1-1 - 5/P1-9 PB - IKT CY - Stuttgart AN - OPUS4-11767 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Koprinarov, Ivaylo A1 - Kühn, Gerhard A1 - Weidner, Steffen A1 - Vogel, Lydia ED - Mittal, K. T1 - Plasma Pretreatment of Polymer Surfaces - Relevance to Adhesion of Metals T2 - 5th Symposium on Metallized Plastics ; 6th Symposium on Metallized Plastics CY - Los Angeles, CA, USA DA - 1996-05-05 PY - 1998 SN - 90-6764-290-8 SP - 271 EP - 293 PB - VSP CY - Utrecht AN - OPUS4-6987 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Giebler, Rainer A1 - Koprinarov, Ivaylo A1 - Weidner, Steffen A1 - Kühn, Gerhard ED - Mittal, K. L. T1 - Significance of interfacial redox reactions and formation of metal-organic complexes for the adhesion of metals on pristine and plasma-treated polymers KW - Oxygen low-pressure plasma treatment of polymers KW - Metal-polymer interactions KW - Peel strength PY - 2000 SN - 90-6764-327-0 VL - 2 SP - 137 EP - 171 PB - VSP CY - Utrecht AN - OPUS4-6979 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Falkenhagen, Jana A1 - Krüger, Ralph-Peter A1 - Much, Helmut A1 - Schulz, Günter A1 - Weidner, Steffen ED - Grellmann, W. T1 - Characterization and identification of new polymer structures by optimization and coupling of HPLC and MALDI-TOF-MS T2 - Polymerwerkstoffe 2000 CY - Halle (Saale), Germany DA - 2000-09-25 PY - 2000 SN - 3-86010-605-8 PB - Martin-Luther-Univ. CY - Halle AN - OPUS4-2250 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Oliver A1 - Riedel, Maren A1 - Christoph, Gabriele A1 - Kalbe, Ute A1 - Berger, Wolfgang ED - Rauch, S. ED - Morrison, G.M. T1 - Assessment of total petrol and polycyclic aromatic hydrocarbon mobility in soils using leaching tests N2 - The risk assessment of total petrol hydrocarbons (TPH) and polycyclic aromatic hydrocarbons (PAH), two of the most frequent soil and water contaminants, has to include their exposure pathways, especially the soil groundwater pathway. Threshold values have to be aquired for the amendment to the German Federal Soil Protection Contaminated Sites Ordinance. For this purpose, a batch experiment with a liquid to solid ratio (L/S) of 2 L/kg was developed. Aim of this work was to verify the robustness of this leaching procedure for TPH and PAH in different soil types against varying test conditions. Also, stir bar sorptive extraction (SBSE) was tested as alternative sample preparation of eluates for PAH analysis. KW - TPH KW - PAH KW - SBSE KW - Liquid-liquid extraction KW - Batch tests PY - 2012 SN - 978-94-007-2539-3 SN - 978-94-007-2540-9 DO - https://doi.org/10.1007/978-94-007-2540-9_36 SN - 1571-4780 N1 - Geburtsname von Riedel, Maren: Kolepki, M. - Birth name of Riedel, Maren: Kolepki, M. N1 - Serientitel: Alliance for Global Sustainability Bookseries – Series title: Alliance for Global Sustainability Bookseries VL - 19 SP - 393 EP - 402 PB - Springer AN - OPUS4-33342 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Barner‐Kowollik, C. A1 - Falkenhagen, Jana A1 - Gründling, T. A1 - Weidner, Steffen ED - Barner-Kowollik, C. ED - Gründling, T. ED - Falkenhagen, Jana ED - Weidner, Steffen T1 - Outlook N2 - The synthesis of macromolecules of an increasing architectural diversity and complexity is the lifeblood of modern macromolecular chemistry, allowing for specialized applications in fields ranging from industrial coatings to medical drug delivery systems. The high complexity of modern polymers with regard to molar mass, chemical functionality, composition, and topology requires a versatile technique for their comprehensive characterization. Today, mass spectrometry, in combination with the soft ionization techniques ESI and MALDI, has been established as an extremely valuable tool for the analysis of polymeric materials. KW - Mass spectrometry KW - Polymers PY - 2012 SN - 978-3-527-32924-3 SN - 978-3-527-64182-6 DO - https://doi.org/10.1002/9783527641826.ch14 SP - 467 EP - 468 PB - Wiley-VCH CY - Weinheim AN - OPUS4-65739 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hoskins, Jessica A1 - Falkenhagen, Jana A1 - Weidner, Steffen ED - Udomkichdecha, W. ED - Böllinghaus, Thomas ED - Manonukul, A. ED - Lexow, J. T1 - Characterization of randomly branched polymers utilizing liquid chromatography and mass spectrometry N2 - Branching in polymers is an important way to modify the materials properties, however the characterization of random branching in polymeric materials is a challenge in polymer analysis. In this work, liquid adsorption chromatography methods are developed for a commercially available hyperbranched polyester (Boltorn™). This Chromatographie techniques was then coupled to offline MALDI-TOF MS analysis, a first in the analysis of randomly branched polymers. The coupling of these two techniques provides superior MALDI-TOF spectra, enabling the easy identification of structural subdistributons based on theoretical molecular weight. Detailed analysis of the MALDI-TOF spectra shows that these Chromatographie conditions separate cyclic Boltorn polymers (with no core molecule) from non-cyclic polymers (with core molecule), and these are the only two architectures observed. MALDI MS also confirms that the Chromatographie Separation mode is adsorption, but further analysis is needed to determine if there is a Separation by degree of branching. KW - Hyperbranched polyesters KW - Polymer mass spectrometry KW - Polymer chromatography KW - Liquid adsorption chromatography KW - MALDI-TOF MS KW - Carbon capture KW - Climate change KW - Lubricant KW - Micro manufacturing KW - Multiphysics simulations KW - WMRIF PY - 2014 SN - 978-3-319-11339-5 SN - 978-3-319-11340-1 SP - 1 EP - 10 PB - Springer AN - OPUS4-32519 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weidner, Steffen A1 - Kühn, Gerhard A1 - Roessner, D. A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang A1 - Lippitz, Andreas ED - Olefjord, I. ED - Nyborg, L. ED - Briggs, D. T1 - Changes in molecular weight distribution of polymers by plasma treatment T2 - 7th European Conference on Applications of Surface and Interface Analysis CY - Göteborg, Sweden DA - 1997-06-16 PY - 1997 SN - 0-471-97827-2 SP - 795 EP - 799 PB - Wiley CY - Chichester AN - OPUS4-6997 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Kühn, Gerhard A1 - Mix, Renate A1 - Retzko, Iris A1 - Gerstung, Vanessa A1 - Weidner, Steffen A1 - Schulze, Rolf-Dieter A1 - Unger, Wolfgang ED - Mittal, K. L. T1 - Plasma polymer adhesion promoters for metal-polymer systems T2 - 2nd International Symposium on Polyimides and Other High Temperature Polymers: Synthesis, Characterization and Applications CY - Newark, NJ, USA DA - 2001-12-03 KW - r.f. pulsed plasma KW - Plasma polymers with functional groups KW - Copolymers KW - Adhesion promoting interlayers KW - Metal-polymer systems PY - 2003 SN - 90-6764-378-5 VL - 2 SP - 359 EP - 388 PB - VSP CY - Utrecht AN - OPUS4-6967 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schulz, Günter A1 - Falkenhagen, Jana A1 - Krüger, Ralph-Peter A1 - Much, Helmut A1 - Rikowski, E. ED - Cherdron, H. T1 - Nachweis neuer Si-Polymerstrukturen durch die Kopplung der SEC mit der MALDI-TOF-MS T2 - Symposium on Tailormade Polymers CY - Merseburg, Deutschland DA - 2000-03-20 PY - 2000 SN - 3-527-30325-1 SN - 1022-1360 N1 - Serientitel: Macromolecular symposia – Series title: Macromolecular symposia IS - 163 PB - Wiley-VCH CY - Weinheim AN - OPUS4-2244 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Ralph-Peter A1 - Falkenhagen, Jana A1 - Schulz, Günter A1 - Weinmann, S. ED - Radusch, H.-J. ED - Fiedler, L. T1 - Beiträge zur Charakterisierung von Polyactiden durch Kopplung von HPLC-Trennmethoden mit der MALDI-Flugzeitmassenspektrometrie T2 - Internationale Fachtagung Polymerwerkstoffe ; P-2002 CY - Halle (Saale), Deutschland DA - 2002-09-25 PY - 2002 SN - 3-86010-656-2 PB - Martin-Luther-Univ. Halle-Wittenberg CY - Halle (Saale) AN - OPUS4-2189 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Falkenhagen, Jana A1 - Krüger, Ralph-Peter A1 - Schulz, Günter ED - Jutzi, P. ED - Schubert, U. T1 - Characterization of Si-polymers by coupling of HPLC-separation methods with MALDI-TOF-MS T2 - Symposium on Silicon Chemistry CY - Werfenweng, Österreich DA - 2002-01-01 PY - 2003 SN - 3-527-30647-1 SP - 406 EP - 418 PB - Wiley-VCH CY - Weinheim AN - OPUS4-2194 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mix, Renate A1 - Falkenhagen, Jana A1 - Schulze, Rolf-Dieter A1 - Gerstung, Vanessa A1 - Friedrich, Jörg Florian ED - K.L. Mittal, T1 - Plasma homo- and copolymerization of allyl alcohol and styrene KW - Plasma polymerization KW - Surface functionalization KW - Molar masses PY - 2009 SN - 978-90-04-16590-8 VL - 5 SP - 317 EP - 340 PB - Koninklijke Brill NV CY - Leiden, The Netherlands AN - OPUS4-19606 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Barner‐Kowollik, C. A1 - Falkenhagen, Jana A1 - Gründling, T. A1 - Weidner, Steffen ED - Barner-Kowollik, C. ED - Gründling, T. ED - Falkenhagen, Jana ED - Weidner, Steffen T1 - Introduction N2 - The book opens with an overview of the available mass analyzers. Special consideration is given by the authors Steven Blanksby and Gene Hart-Smith to their uses in polymer chemistry. Various ionization techniques applicable in polymer mass spectrometry are then explored in-depth by Anthony Gies. Chrys Wesdemiotis subsequently takes a close look at tandem mass spectrometry, a highly important tool for the elucidation of polymer structure and one of the major contemporary fields of development in the mass spectrometry sector. Sarah Trimpin and colleagues follow with their contribution, describing gas-phase ion-separation procedures as applied to synthetic polymers. The ionization process of polymers via the MALDI approach requires a careful design of the sample preparation procedures. Scott Hanton and Kevin Owens therefore provide a close look at how polymer samples are best prepared. Synthetic polymers are not only important materials in their own right, but are also frequently employed to (covalently) modify variable surfaces. Surface analysis is notoriously challenging and a range of techniques have to be employed to map the chemical characteristics of surface-bound macromolecules. Christine Mahoney and Steffen Weidner provide a detailed description of the part which surface-sensitive mass spectrometric techniques play in elucidating a polymer surface’s structure. Soft ionization mass spectrometry techniques can be especially powerful when combined with chromatographic techniques such as size exclusion chromatography (SEC), liquid adsorption chromatography at critical conditions (LACCCs) or both. Jana Falkenhagen and Steffen Weidner explore the wide variety of so-called hyphenated techniques and impressively demonstrate the information depth that can be attained by employing such technologies. While arguably the majority of molecular weight determination is carried out via SEC often equipped with refractive index as well as light scattering detectors, Till Gruendling, William Wallace, and colleagues demonstrate how MALDI-MS as well as SEC coupled to ESI-MS can be employed to deduce absolute molecular weight distributions. The chapter also provides an overview of contemporary automated data processing techniques for mass spectrometric data. Most polymers generated are arguably copolymers and it thus is mandatory to dedicate an entire chapter to the analysis of copolymers via mass spectrometry — Ulrich Schubert and Anna Crecelius provide an in-depth analysis. The field of living/controlled radical polymerization provides fascinating high precision avenues for the construction of complex macromolecular architectures and enables the generation of polymers with a high degree of end-group fidelity, which are often employed in cross-discipline applications (e.g., in biosynthetic conjugates). Soft ionization mass spectrometry plays an integral part in unravelling the mechanism of living/controlled radical polymerization processes as well as in the characterization of macromolecular building blocks: Christopher Barner-Kowollik and colleagues take a close look at the current state-of-the-art. Similarly, polymers generated via conventional radical polymerization can be readily investigated via mass spectrometry. Here, especially the investigation of the initiation process and of the generated end-group type is of high importance — Michael Buback, Greg Russell, and colleagues report. Finally, Grazyna Adamus and Marek Kowalczuk survey the field of mass spectrometry applied to polymers prepared via nonradical methods such as coordination polymerization, polycondensation, and polyaddition. The question of polymer stability and a detailed understanding of polymer degradation processes on a molecular level are of paramount importance for an evaluation of the performance of a polymer in chemical applications or as a material. Sabrina Carroccio and colleagues survey the field of soft ionization mass spectrometry applied to the molecular study of degradation processes at the book’s conclusion. KW - Mass spectrometry KW - Polymers PY - 2012 SN - 978-3-527-32924-3 SN - 978-3-527-64182-6 DO - https://doi.org/10.1002/9783527641826.ch SP - 1 EP - 4 PB - Wiley-VCH CY - Weinheim AN - OPUS4-65732 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Ralph-Peter A1 - Falkenhagen, Jana A1 - Schulz, Günter A1 - Heinemann, M. A1 - Weinmann, S. A1 - Friedrich, Jörg Florian A1 - Fritz, H.-G. ED - Fritz, H.-G. ED - Eisenbach, C. D. T1 - Synthese von Polylactiden mittels reaktiver Extrusion und Produktcharakterisierung durch Kopplung von HPLC-Methoden mit der MALDI-TOF-MS T2 - 18. Stuttgarter Kunststoff-Kolloquium CY - Stuttgart, Deutschland DA - 2003-03-19 PY - 2003 SN - 3-00-010663-4 IS - CD-ROM PB - Univ., IKT, IAMC CY - Stuttgart AN - OPUS4-2190 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Holm, Olaf A1 - Trapp, S. A1 - Dési, R. A1 - Rotard, W. A1 - Ihle, T. T1 - Phytoscreening - Probenahme und chemische Untersuchung von Bohrkernen aus Bäumen zur Erkundung von Grundwasserschäden und Bodenbelastungen N2 - Die Probenahme an Pflanzen stellt eine kostengünstige und minimalinvasive Ergänzung zu gängigen Methoden der Erkundung von Verunreinigungen im Grundwasser und Boden (Sickerwasser) dar. Das grundlegende Prinzip dabei ist, dass die gelösten Schadstoffe mit dem Wasser über die Wurzeln aufgenommen werden. Innerhalb der Pflanze werden die Stoffe mit dem Saftstrom nach oben in den Stamm oder in den Stängel und weiter in die Blätter verlagert. Mit einem Bohrer können Holzproben aus dem Stamm von Bäumen entnommen und im Labor auf Schadstoffe analysiert werden. Die gemessenen Gehalte geben dann Hinweise auf die Untergrundbelastung des Standortes. In der wissenschaftlichen Literatur wird dieses semiquantitative Verfahren als Phytoscreening bezeichnet. Die Eignung des Phytoscreenings zur Erkundung oder zum Monitoring konnte für einige Schadstoffe, vorwiegend aus der Gruppe der chlorierten Lösungsmittel, zweifelsfrei belegt werden. KW - Phytoscreening KW - Leichtflüchtige chlorierte Kohlenwasserstoffe (LCKW) KW - Erkundung KW - Monitoring KW - Bäume PY - 2012 SN - 978-3-8114-9700-9 SP - 3751-1 EP - 3751-24 PB - C.F. Müller ET - 65. Ergänzungslieferung / 3. Auflage AN - OPUS4-25987 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -