TY - RPRT A1 - Koch, Matthias A1 - Liebich, Almuth A1 - Win, Tin A1 - Nehls, Irene T1 - Certified Reference Materials for the determination of mineral oil hydrocarbons in water, soil and waste N2 - The international research project HYCREF, funded by the European Commission in the 5 th Framework programme, aimed to develop methods to prepare homogenous and stable water-, soiland waste reference materials contaminated with mineral oil hydrocarbons and to test certify the mineral oil content by gas chromatographic methods. As mineral oil products are important sources for environmental contaminations a high need exists for certified reference materials for their determination using the new gas chromatographic methods (soil: ISO/FDIS 16703, waste: ENpr 14039, water: ISO 9377-2). The experimental conditions and results for preparation and characterisation of a total of nine reference materials (3 water-, 3 soil- and 3 waste materials) are described and discussed. Target values for the reference materials were defined at the beginning of the project in order to have clear quality criteria, which could be compared with the achieved results at the end of the project. These target specifications were related to the maximum uncertainty from test certification exercises (< 5 % for soil/waste and < 10 % for water), the maximum inhomogeneity between bottles (< 3 %) and minimum requirements for stability (> 5 years for soil/waste and > 2 years for water). The feasibility studies showed that solid materials (soil, waste) could be prepared sufficiently homogenous and stable. The test certified values of the 6 solid materials comprise a wide range of mineral oil content from about 200-9000 mg/kg with expanded uncertainties between 5.7-13.1 % using a coverage factor k (k = 2). The development of new water reference materials –the so-called “spiking pills” for an offshore- and a land-based discharge water represents one of the most innovative aspects of the project. The spiking pill technology facilitates the application and storage and improves the material stability compared with aqueous materials. Additional to the preparation and test certification of the reference materials investigations on the analytical method for the determination of mineral oil hydrocarbons were performed. The results obtained in relation to the optimisation of analytical method (extraction procedure, sample pretreatment, clean-up and measurement) were provided to the respective working group of ISO/TC 190, ISO/TC 147 and CEN/TC 292 and were incorporated into the ongoing standardisation procedures. The new version of ISO/FDIS 16703 (July 2004) includes the improvements based on HYCREF results, for example the increase of the solvent/sample ratio, the removal of acetone from the organic extracts and the use of column technique instead of batch technique for clean-up. T3 - BAM Forschungsberichtreihe - 272 PY - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-1795 SN - 978-3-86509-363-9 SN - 0938-5533 VL - 272 SP - 1 EP - 92 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-179 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Klingelhöffer, Hellmuth A1 - Ledworuski, Siegmar A1 - Brookes, Stephan-Peter A1 - May, Thomas T1 - Computer controlled tensile testing according to EN 10002-1 Results of a comparison test programm to validate a proposal for an amendment of the standard N2 - Tensile testing according to EN 10002-1 is one of the basic mechanical tests to characterise the mechanical properties of metallic materials. This testing procedure has been regularly under development for many decades in order to modify and amend it and to bring it up to an up to date standard. Today tensile testing for quality control in metals manufacturing industry is routinely performed automatically with computer controlled testing machines. Due to economical needs of industry proposals were made by a European Standard Committee to amend the standard EN 10002-1. A European research project with the acronym TENSTAND was started to validate the proposed modifications of the tensile testing standard. The work package 4 of the project was to validate the machine control characteristics. A comparison test program was started with ten partners, 4 test piece geometries and 3 test parameters for 6 materials, partly with upper and lower yield strength and partly with 0.2 % proof strength to compare experimental results according to the proposal to modify the standard EN 10002-1. Initially testing in the strain control mode was introduced as well as switching of the control mode to crosshead control 1 and switching of the testing speed at appropriate points during the test. The comparison test was evaluated statistically and scientifically. The following conclusions were derived from the comparison test and summarised as recommendations to the standard committees. The scatter of the material properties were not significantly reduced by introducing the amended testing procedure. Few of the reasons for the continuously observed scattercan be identified as follows: The material properties are observed to be widely dependent on the testing speed. As a consequence the range for the allowed testing speed must be reduced. The closed loop control was not optimised sufficiently in some tests, the use of complicated testing machine software led to misinterpretation of software commands, individual testing equipment and implementation of the tensile testing procedure led also to scatter of the material properties which lay in a range of few percent. This is blurred by the inhomogeneity of the material. T3 - BAM Forschungsberichtreihe - 268 PY - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-1835 SN - 978-3-86509-318-3 SN - 0938-5533 VL - 268 SP - 1 EP - 44 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-183 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -