TY - CONF A1 - Neumann, Patrick P. T1 - Aerial Robot Olfaction - An Overview of Research @BAM N2 - This presentation gives an introduction to the gas-sensitive aerial robots developed at BAM, including various application examples in the field of mobile robot olfaction: gas source localization, gas distribution mapping, and trial following. T2 - The 6th Meeting of the Investigation Committee on Measurement of Odors and Applications of Their Psychological/Physiological Effects CY - Online meeting DA - 21.01.2022 KW - Mobile Robot Olfaction KW - Gas Tomography KW - Tunable Diode Laser Absorption Spectroscopy (TDLAS) KW - Gas Source Localization KW - Gas Distribution Mapping KW - Trial Following PY - 2022 AN - OPUS4-54241 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Winkler, Nicolas P. T1 - Robot-Assisted Air Quality Monitoring N2 - This presentation gives an introduction to robot-assisted air quality monitoring based and shows results of the research project RASEM. T2 - The 6th Meeting of the Investigation Committee on Measurement of Odors and Applications of Their Psychological/Physiological Effects CY - Online meeting DA - 21.01.2022 KW - Environmental Monitoring KW - Air Pollution KW - Air Quality KW - Wireless Sensor Network KW - Mobile Robot Olfaction PY - 2022 AN - OPUS4-54251 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Ökodesign und Circular Economy - Normungsroadmap C-Eco, Normung zu ErP und Ressortforschung N2 - (i) Überblick zum aktuellen Stand der Normung und aktuellen Normungsvorhaben im Bereich Ökodesign. (ii) Vorstellung des Forschungsprojektes (Steigerung der produktbezogenen Energie- und Ressourceneffizienz) vor allem in Hinblick auf Vorhaben die sich auf die Langlebigkeit, Reparierbarkeit und Recyclingfähigkeit. T2 - Expertenforum „Global Environmental Compliance“ - Fraunhofer IPA CY - Stuttgart, Germany DA - 24.03.2022 KW - Circular Economy KW - Ecodesign KW - Produkteffizienz KW - Materialeffizienz KW - Ressourceneffizienz KW - Ressortforschung KW - WUP PY - 2022 AN - OPUS4-54532 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Plarre, Rüdiger T1 - Klopf auf Holz! ... Weil es gut und dauerhaft ist – Und was trägt die Normung dazu bei? N2 - Die Bewertung der Dauerhaftigkeit von Holz und Holzprodukten ist ein zentrales Thema im Holzschutz. Es wird zwischen einer natürlichen und einer herbeigeführten Dauerhaftigkeit unterschieden. Die Norm DIN EN 350 trägt beiden Richtungen Rechnung. Die Anwendung der Norm wird in vielen Fällen aber nicht korrekt durchgeführt. Schwachstellen werden diskutiert. T2 - Fortbildungsveranstaltung des Deutschen Holzschutzverbandes CY - Online meeting DA - 21.01.22 KW - Holzschutz KW - Dauerhaftigkeit KW - DIN EN 350 PY - 2022 AN - OPUS4-54298 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Winkler, Nicolas P. T1 - RASEM - Robot-Assisted Environmental Monitoring for Air Quality Assessment N2 - This presentation was held at the SAF€RA symposium and gives an overview to the research project RASEM and its results. T2 - 2022 SAF€RA Symposium CY - Rome, Italy DA - 19.05.2022 KW - Air Pollution KW - Air Quality KW - Environmental Monitoring KW - Mobile Robot Olfaction KW - Wireless Sensor Network PY - 2022 AN - OPUS4-54953 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sichler, Theresa T1 - BAM-Projekt "extraWERT": Gleichwertigkeit der nach AbfKlärV zulässigen Verfahren zur Phosphorbestimmung in Klärschlamm N2 - In Deutschland ist ab 2029 eine Phosphorrückgewinnung aus Klärschlamm verpflichtend. Ausgenommen sind Klärschlämme mit weniger als 20 g P/kg TM. Für die Phosphorbestimmung sind verschiedene Methoden nach Klärschlammverordnung als gleichwertig zugelassen: Der Königswasseraufschluss in der Mikrowelle und am Rückfluss sowie die Messung an ICP-OES, ICP-MS und die photometrische Bestimmung mittels Ammoniummolybdaten. An der BAM wurden die unterschiedlichen Methodenkombinationen aus Aufschluss- und Messmethode an 15 Klärschlämmen überprüft und in einem Ringversuch mit einem Klärschlamm getestet. Die Ergebnisse werden in diesem Vortrag zusammengefasst. Als Folge der Untersuchungen wird für die Phosphorbestimmung in Klärschlamm die ICP-OES-Messung nach Königswasseraufschluss in der Mikrowelle empfohlen. T2 - VDLUFA Frühjahrssitzung 2022 der Fachgruppe III Düngemittel CY - Vienna, Austria DA - 18.05.2022 KW - Ringversuch KW - Reproduzierbarkeit KW - Wiederholbarkeit KW - Phosphorrückgewinnung KW - Gleichwertigkeit Messverfahren PY - 2022 AN - OPUS4-54852 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogel, Christian T1 - Analytical Challenges for PFAS in Environmental Samples - Methods, Approaches and Applicability N2 - Per- and polyfluoroalkyl substances (PFAS) are anionic, cationic and zwitterionic synthetic products, in which the hydrogen atoms on the carbon skeleton of at least one carbon atom have been completely replaced by fluorine atoms and which include up to 1.7 M compounds, depending on the definition. As a result of continuous and prolific use, mainly in aviation firefighting foams, thousands of industrial and military installations have been found to contain contaminated soil, groundwater and surface water. Furthermore, because of the continuous contamination through PFAS containing commercial products, effluents and sewage sludge from WWTPs have been shown to be an important source of PFAS discharge into the aquatic environment. In the last few years, legacy PFAS (≥C4) have been found in various environments, including soil, water and wastewater, and their environmental pathways have been partly described. Several long-chain PFAS species, and their respective salts are considered as persistent organic pollutants by the United Nations Stockholm Convention. These pollutants have been linked to altered immune and thyroid function, liver disease, lipid and insulin dysregulation, kidney disease, adverse reproductive and developmental outcomes, and cancer. A significant shift in the chemical industry towards production of short (C4-C7) and ultrashort (C1-C3) alternatives was observed in response to recently intensified regulations and restrictions on the use of long-chain (≥C8) PFAS. PFAS analysis in environmental samples is currently mainly done by liquid chromatography tandem mass spectrometry (LC-MS/MS). This efficient method is conducted in a targeted fashion analyzing a small subset of PFAS. The US EPA method for analysis of PFAS using LC-MS/MS for example currently lists 40 PFAS (≥C4). However, to get a better overview of the amount of “total PFAS,” sum parameter methods like total oxidizable precursor (TOP) assay and methods based on combustion ion chromatography (CIC) are in development. CIC results in data regarding the sum of absorbable organic fluorine (AOF) or extractable organic fluorine (EOF), which can also quantify other organically bound fluorine compounds such as fluorinated pesticides and pharmaceutical. Moreover, non-target and suspect screening mass spectrometry can be used to identify novel emerging PFAS and partly unknown fluorinated compounds in environmental samples. Furthermore, to analyze ultrashort PFAS (C1-C3), supercritical fluid chromatography (SFC), hydrophilic interaction chromatography (HILIC) and gas chromatography-mass spectrometry (GC-MS) are available, but further research is needed to develop reliable and accurate methods to quantify several ultrashort PFAS in environmental samples. Additionally, for research purpose several spectroscopical methods like X-ray photoelectron spectroscopy (XPS), fluorine K-edge X-ray absorption near-edge structure (XANES)spectroscopy, particular induced gamma-ray emission (PIGE) spectroscopy and 19F nuclear magnetic resonance (NMR) spectroscopy are available. T2 - CleanUp 2022 CY - Adelaide, Australia DA - 11.09.2022 KW - PFAS KW - Combustion ion chromatography KW - XANES spectroscopy PY - 2022 AN - OPUS4-55741 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sichler, Theresa T1 - Analyseverfahren und Messhäufigkeit zur Bestimmung des Phosphorgehalts im Klärschlamm nach AbfKlärV N2 - Auf dem Betreiberforum der DWA-Plattform P-Rück wurden die Empfehlungen für den Vollzug der Phosphorrückgewinnungspflicht aus Klärschlamm vorgestellt. Diese Empfehlungen behandeln die Häufigkeit der Phosphoruntersuchungen im Klärschlamm, wo ein Jahresgang empfohlen wird und eine Empfehlung der Phosphorbestimmung über Aufschluss der Probe in der Mikrowelle und Messung mit ICP-OES. Untermauert wurden die Empfehlungen mit den Ergebnissen von Klärschlamm-Monitoring, Ringversuch und Analytikvergleich aus dem Vorhaben extraWERT. T2 - Betreiberforum der DWA-Plattform P-Rück CY - Stuttgart, Germany DA - 23.06.2022 KW - Klärschlamm KW - Ringversuch KW - Reproduzierbarkeit KW - Phosphorrückgewinnung PY - 2022 AN - OPUS4-55146 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meermann, Björn T1 - EOF Analyse in Sedimenten Mittels HR-CS-GFMAS N2 - Im Vortrag wird die Entwicklung einer Methode sowie Analyse von PFAS mittels HR-CS-GFMAS in Sedimentzeitreihen der Umweltprobenbank vorgestellt. T2 - AK Umweltmonitoring der GDCh CY - Online meeting DA - 05.04.2022 KW - HR-CS-GFMAS KW - Sedimente KW - Umweltprobenbank KW - PFAS PY - 2022 AN - OPUS4-54628 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogel, Christian T1 - Microspectroscopy reveals dust-derived apatite grains in highly-weathered soils from the Kohala climosequence on Hawaii N2 - Dust deposition is an important source of phosphorus (P) to many ecosystems. However, there is little evidence of dust-derived P-containing minerals in soils. Here we studied P forms along a well-described climatic gradient on Hawaii, which is also a dust deposition gradient. Soil mineralogy and soil P forms from six sites along the climatic gradient were analyzed with bulk (X-ray diffraction and P K-edge X-ray absorption near edge structure) and microscale (X-ray fluorescence, P K-edge X-ray absorption near edge structure, and Raman) analysis methods. In the wettest soils, apatite grains ranging from 5 to 30 μm in size were co-located at the micro-scale with quartz, a known continental dust indicator suggesting recent atmospheric deposition. In addition to colocation with quartz, further evidence of dust-derived P included backward trajectory modeling indicating that dust particles could be brought to Hawaii from the major global dust-loading areas in central Asia and northern Africa. Although it is not certain whether the individual observed apatite grains were derived from long-distance transport of dust, or from local dust sources such as volcanic ash or windblown fertilizer, these observations offer direct evidence that P-containing minerals have reached surface layers of highly-weathered grassland soils through atmospheric deposition. T2 - BESSY Science Seminar CY - Online meeting DA - 01.04.2022 KW - Phosphorus KW - Soil KW - X-ray diffraction KW - X-ray absorption near-edge structure (XANES) spectroscopy KW - Fertilizer KW - Raman spectroscopy KW - infrared spectroscopy PY - 2022 AN - OPUS4-54584 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meermann, Björn T1 - Teaching an old dog new tricks – molecular absorption spectrometry for fluorine analysis N2 - The introduction of fluorine in organic molecules leads to new chemical/physical properties and up to now more than 6000 fluorinated substances are on the market. Especially in the field of pharmaceuticals, fluorinated organic molecules are becoming more and more popular and at present amount up to 25% of market share, with an upward trend. Highly fluorinated organic substances are also used in technical applications (e.g., coatings, fire-extinguishing agents, textiles). However, next to beneficial aspects of per- and polyfluorinated compounds (PFAS) these substances belong to the class of “emerging contaminants” in particular due to their high persistence and ubiquitous presence in the environment. Due to the large variety of fluorinated substances and increasing production volumes, it is most likely that numerous and up to date unknown fluorine-species are present in the (aquatic) environment. Sum parameter analytical methods to assess the degree of contamination of surface waters with organically bound fluorine are highly needed. Within this presentation the development of a high resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) method for PFAS analysis is presented. Fluorine detection is enabled upon the addition of a molecule forming agent – Ga turned out being the most sensitive one. Furthermore, the injection as well as temperature program was optimized, and appropriate solid phase extraction (SPE) phases were identified for PFAS extraction. Our developed HR-CS-GFMAS method turned out as a versatile tool in PFAS analysis in a broad variety of matrices – some recent applications will be highlighted as well. T2 - 20th European Symposium on Fluorine Chemistry CY - Berlin, Germany DA - 14.08.2022 KW - HR-CS-GFMAS KW - PFAS Analysis KW - Coparison study CIC <=> HR-CS-GFMAS PY - 2022 AN - OPUS4-55532 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogel, Christian T1 - Mechanochemical remediation of PFAS in soils – Does it work? N2 - Current decontamination strategies of PFAS-burdened soils mainly consist of adsorption methods using adsorbents for fixation of PFAS in the ground. A second option is the utilization of a “pump and treat” process, cycling polluted soils through a washing plant leading to the concentration of the pollutants in the fine fraction. Only a subsequent, high-energy consuming pyrolysis process guarantees the total destruction of all fluorinated organic contaminants. These approaches are cost-intensive and not intended for the direct decomposition of all PFAS contaminants. Hence, there is a great demand for innovative developments and chemical treatment technologies, dealing with new strategies of tackling the PFAS problem. Thus, we investigated mechanochemical treatment of PFAS contaminated soils with various additives in a ball mill and analyzed the PFAS defluorination with gas chromatography mass spectrometry (GC-MS) and liquid chromatography tandem mass spectrometry (LC-MS/MS), respectively, as well as the fluoride mineralization by ion chromatography (IC) and fluorine K-edge X-ray absorption near-edge structure (XANES) spectroscopy. T2 - Baltic Sea PFAS Network Coffee Session CY - Online meeting DA - 25.08.2023 KW - Mechanochemical treatment KW - Per- and Polyfluoroalkyl substances (PFAS) KW - Remediation KW - X-ray absorption near-edge structure (XANES) spectroscopy PY - 2023 AN - OPUS4-58114 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - Die neue Ökodesignverordnung - Von der Richtlinie zur Verordnung / Der digitale Produktpass N2 - Der Vortrag stellt den Vorschlag der EU-Kommission für eine neue Verordnung zum Ökodesign nachhaltiger Produkte vor. Der digitale Produktpass ist einer der Schwerpunkte. T2 - Jahrestagung der VEREV CY - Berlin, Germany DA - 8.11.2022 KW - Ökodesign KW - Nachhaltigheit KW - Effizienz KW - EU-Recht PY - 2022 AN - OPUS4-56826 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf T1 - Insights at the point-of-need via immunoanalytical methods N2 - A vast number of emerging pollutants is being detected in the environment. Another lingering problem are health-threatening contaminants, such as mycotoxins, that deteriorate food and feed, and the pathogens themselves. Analytical methods, suitable for trace analysis, are needed that are desirably also fast, inexpensive and, if possible, robust and portable. It is set out, how immunoana-lytical, i.e., antibody-based methods, which are elaborated in a broad range of formats, can be profitably used to gain insights on the distribution and concentration trends of the target analytes at the point-of-need. T2 - Kolloquium der Fakultät für Pharmazie der Universität Porto CY - Porto, Portugal DA - 01.07.2022 KW - Immunoassay KW - Sensor KW - Antibody PY - 2022 AN - OPUS4-56781 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf T1 - Advanced materials broadening the scope of antibody-based analytical methods N2 - Immunoanalytical Techniques, i.e., antibody-based analytical methods, have been used for decades in clinical diagnostics. What makes them attractive for other fields of application is their short time-to-result and high sensitivity. Microplate-based assays such as ELISA have been adopted early in environmental and food analysis. Yet, to make immunoassays even faster, more sensitive, robust, and, most desirable, portable, advanced materials, sometimes developed for other purposes, can be profitably used to achieve these goals. Materials can be novel labels, e.g., chemical or particle labels, such as fluorophores or nanoparticles. Carrier particles, such as magnetic or polymer beads, make it possible to adopt the assays to meso- or microfluidic set-ups and encoding them opens the path to multiplex analysis. Specialty electrodes can enable for higher sensitivity in electrochemical detection. All this broadens the scope of application and lowers effort and cost for analysis at the point-of-need. T2 - ChemForum - Kolloquium des Instituts für Strukturchemie CY - Lisbon, Portugal DA - 07.09.2022 KW - Immunoassay KW - Biosensor KW - Antibody PY - 2022 AN - OPUS4-56782 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf T1 - Environmental Analysis at BAM N2 - The talk is to introduce BAM, the Department of Analytical Chemistry; Reference Materials and the Division of Environmental Analysis and its works to the audience. T2 - Seminar des Centre for Environmental and Marine Studies (CESAM) der Universität Aveiro CY - Aveiro, Portugal DA - 12.09.2022 KW - Immunoassay KW - Biosensor KW - Antibody PY - 2022 AN - OPUS4-56784 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf T1 - Field Analysis by Antibody-based Analytical Methods: The Importance of Advanced Materials N2 - Analytical methods based on the selectivity of antibodies, often called immunoassays, are a back-bone of clinical laboratory diagnostics. To bring them to the field, i.e., to make immunoanalytical methods portable, hopefully even faster, more sensitive, and robust, advanced materials are re-quired. Materials can be novel labels, e.g., chemical or particle labels, such as fluorophores or na-noparticles. Carrier particles, such as magnetic or polymer beads, make it possible to adopt the as-says to meso- or microfluidic set-ups and encoding them opens the path to multiplex analysis. Spe-cialty electrodes can enable for higher sensitivity in electrochemical detection. Without research into better materials, efforts to bring analysis to the point-of-need will not bear fruit. T2 - Kolloquium des Aveiro Institut of Materials (CICECO) der Universität Aveiro CY - Aveiro, Portugal DA - 20.09.2022 KW - Immunoassay KW - Biosensor KW - Antibody PY - 2022 AN - OPUS4-56785 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Circular Economy - Schnittmenge Rechtssetzung und Normung N2 - Im Rahmen des Vortrages wurde ein kurzer kurzer Einstieg in die Circular Economy und die Schnittmenge zur Politik, speziell der nationalen und europäischen Rechtssetzung gegeben. Weiter wurde an praktischen Beispielen gezeigt, wie Circular Economy bereits heute durch Normung gelingen kann und wo es Verbesserungsbedarf gibt. Außerdem wurde ein Überblick über bestehende und zukünftige Legislativvorgaben gegeben. T2 - Wie die Umsetzung einer Circular Economy durch elektrotechnische Normung gelingen kann CY - Online meeting DA - 30.03.2023 KW - Circular Economy KW - Kreislaufwirtschaft KW - Rechtssetzung KW - Kreislaufwirtschaftsstrategie PY - 2023 AN - OPUS4-57292 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogel, Christian T1 - Investigation of per and polyfluoroalkyl substances (PFAS) in soils and groundwater through fluorine K-edge XANES spectroscopy – potential for collaboration N2 - Per- and polyfluoroalkyl substances (PFAS) are a group of anionic, cationic and zwitterionic synthetic products, in which the hydrogen atoms on the carbon skeleton of at least one carbon atom have been completely replaced by fluorine atoms and which include more than 4730 compounds, depending on the definition. As a result of continuous and prolific use, mainly in aviation firefighting foams, thousands of industrial and military installations have been found to contain contaminated soil, groundwater and surface water. Furthermore, current decontamination strategies of PFAS-burdened soils mainly consist of adsorption methods using adsorbents for fixation of PFAS in the ground. Hence, there is a great demand for innovative developments and chemical treatment technologies, dealing with new strategies of tackling the PFAS problem. Thus, we investigated mechanochemical treatment of PFAS contaminated soils with various additives in a ball mill and analyzed the PFAS defluorination. In this presentation the advantages of fluorine K-edge X-ray absorption near-edge structure (XANES) spectroscopy for various environment samples are shown. T2 - SESAME-Germany Info Day CY - Hamburg, Germany DA - 21.04.2023 KW - Soil KW - Per- and Polyfluoroalkyl substances (PFAS) KW - Synchotron KW - X-ray absorption near-edge structure (XANES) spectroscopy PY - 2023 AN - OPUS4-57365 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Normungsaktivitäten zur Umsetzung einer Circular Economy und die Schnittmenge zur Politik N2 - Der Vortrag fasst die Schnittmenge zwischen Normung und Politik bezüglich einer zirkulären Wirtschaft (Circular Economy) zusammen. Es wird an konkreten Schlüsselgremien und praktischen Beispielen gezeigt, wie Circular Economy bereits heute durch Normung gelingen kann und welche Zuarbeit durch die Politik von den Normungsgremien erbeten wird. T2 - TASIMA 2023 CY - Magdeburg, Germany DA - 11.09.2023 KW - Circular Economy KW - Kreislaufwirtschaft KW - Normung KW - Zirkuläre Wirtschaft PY - 2023 AN - OPUS4-58407 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Secondary building materials in a circular economy N2 - Half of the global material consumption is mineral material. The circularity is still low so that enhanced use of secondary building material is required to close loops. Three different secondary building materials are discussed based on exemplary research results: construction and demolition waste (C&D waste), soil-like material and incineration bottom ash (IBA). Focus was laid on the environmental compatibility of the materials examined mainly by standardized leaching tests. C&D waste was investigated after a wet treatment using a jigging machine, soil-like material and IBA were characterized with respect to their material composition. The environmental compatibility in particular was studied using standard leaching tests (batch tests and column tests). It was concluded that soil-like material can mostly be utilized even when the precautionary limit values set are exceeded by a factor of less than 2. For C&D waste the fine fraction below 2 mm and the content of brick material is problematic. IBA fulfills quality level HMVA-2 following German regulation. Higher quality levels of utilization might be achievable with better treatment technologies. T2 - 15th International Conference on Ecomaterials (ICEM15) CY - Iki, Japan DA - 26.11.2023 KW - Secondary building materials KW - Incineration bottom ash KW - Construction and demolition waste KW - Soil-like material PY - 2023 AN - OPUS4-59186 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf T1 - Bestimmung von anthropogenen Markerkonzentrationen für die SARS-CoV-2 Quantifizierung mittels eines Hochdurchsatzverfahrens (ELISA) N2 - Im Vorhaben „MARKERIA - Bestimmung von anthropogenen Markerkonzentrationen für die SARS-CoV-2 Quantifizierung mittels eines Hochdurchsatzverfahrens (ELISA)“ geht es um die Bestimmung von Carbamazepin, Diclofenac, Koffein und einer endogenen Gallensäure als potentielle Marker für die Kalibrierung der SARS-CoV-2 Quantifizierung im Abwasser. Der Vortrag wurde gehalten im Rahmen der 22. Sitzung des Begleitkreises des übergeordneten Projektes ESI-CorA. Er gab den Projektstand wieder, den die BAM bis dahin erzielt hatte. Die Marker waren in sämtlichen untersuchten Abwasser-Zulaufproben enthalten und zeigten spezifische Trends. Weitere Korrelationen müsse die weitergehende Datenauswertung ergeben.A T2 - 22. Sitzung des Begleitkreises des Projektes ESI-CorA CY - Online meeting DA - 13.02.2023 KW - Wastewater-based epidemiology KW - ELISA KW - Abwasser KW - Antikörper KW - Antibody PY - 2023 AN - OPUS4-59205 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meermann, Björn T1 - Closing the PFAS gap – comparative study of sum parameter, non-target and target approaches N2 - Analytical Approaches for PFAS Analysis in the environment. T2 - ICOBTE & ICHMET 2023 CY - Wuppertal, Germany DA - 08.09.2023 KW - PFAS KW - HR-CS-GFMAS KW - LC-HRMS PY - 2023 AN - OPUS4-59156 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meermann, Björn T1 - Analytical Approaches for PFAS Sum-parameter Analysis – from Materials to Environment N2 - PFAS analysis in environmental samples via complementary analytical apporaches. T2 - 16th Rio Symposium on Atomic Spectrometry CY - Bento Goncalves, Brazil DA - 29.11.2023 KW - PFAS KW - HR-CS-GFMAS KW - LC-HRMS PY - 2023 AN - OPUS4-59157 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Plarre, Rüdiger T1 - Sylfuryldiflourid im Holzschutz N2 - Die Anwendung von Sulfuryldiflourid ist auf den bekämpfenden Holzschutz gegen Insekten beschränkt. Die Anwendung in Deutschland regelt die DIN 68800 Teil 4 und das europäische Biozidgesetz. Zur Erhaltung von Kulturgut ist dieses Begasungsmittel einzigartig. T2 - Seminar E.: Symposium zukünftige Verwendung von Sulfuryldifluorid CY - Hannover, Germany DA - 17.04.2024 KW - Holzschutz KW - Begasung KW - Regelwerk PY - 2024 AN - OPUS4-59917 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf T1 - Antikörperbasierte Sensorik für das Monitoring von Spurenstoffen im Wasser N2 - Der Vortrag beschreibt den Stand der Arbeiten an der BAM, Fachbereich Umweltanalytik zur Entwicklung von Sensoren für die Wasseranalytik. Er stellt die bisherigen Arbeiten da, die ausgehend von ELISAs, zunehmend portable Plattformen wie FPIA und LFIA umfassen. Beas-based Formate werden von mikrotiterplatten-basierten Techniken auf mikrofluidische Lab-on-Chip-Systeme übertragen, die bei geeigneter Miniaturisierung und Automatisierung als Sensorsysteme angesehen werden können. Der Vortrag endet mit einem Blick auf ein laufendes Monitoring-Projekt von anthropogenen Markern in Abwasser und charakterisiert die Treiber, die die Entwicklung von Sensoren für die Wasseranalytik in den letzten Jahren vorantreiben. T2 - Sitzung des Fachausschusses Wasser der Wasserchemischen Gesellschaft in der GDCh CY - Online meeting DA - 16.01.2024 KW - Biosensoren KW - Immunoassay KW - Antikörper PY - 2024 AN - OPUS4-59383 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Roesch, Philipp T1 - micro-XRF und XANES-Analytik von PFAS N2 - Ergebnispräsentation über gesammelte Ergebnisse der Synchrotron F µ-XRF und -XANES Spektroskopischen Untersuchungen von PFAS und PFAS-haltigen Materialien T2 - Online-Seminar des Fortbildungsverbundes Boden und Altlasten Baden-Württemberg CY - Online meeting DA - 07.12.23 KW - PFAS KW - XANES KW - XRF KW - Röntgenspektroskopie KW - Synchrotron PY - 2023 AN - OPUS4-59077 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. T1 - Seminar on Smelling Drones – Part 1: Introduction to Aerial Robot Olfaction N2 - This seminar series comprises three lectures on drones and ground robots capable of sensing chemical substances and two accompanying hands-on workshops on nano drones equipped with chemical sensors. In the first lecture, Dr. Neumann will talk on a summary of aerial robot olfaction and his research. In the second and third lectures, more details of the nano drones equipped with chemical sensors will be provided, and the participants can get hands on experience of the nano drones in the accompanying workshops. The lectures will be given in English. This seminar series is supported by FY2023 Researcher Exchanges Program in UEC. T2 - Seminar Series on Smelling Drones CY - Tokyo, Japan DA - 28.11.2023 KW - Mobile robotic olfaction KW - Aerial robot KW - Gas source localization KW - Gas distribution mapping PY - 2023 AN - OPUS4-59129 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. T1 - Seminar on Smelling Drones – Part 3: Deep Dive: Bout-based Gas Source Localization using Aerial Robot Swarms N2 - This seminar series comprises three lectures on drones and ground robots capable of sensing chemical substances and two accompanying hands-on workshops on nano drones equipped with chemical sensors. In the first lecture, Dr. Neumann will talk on a summary of aerial robot olfaction and his research. In the second and third lectures, more details of the nano drones equipped with chemical sensors will be provided, and the participants can get hands on experience of the nano drones in the accompanying workshops. The lectures will be given in English. This seminar series is supported by FY2023 Researcher Exchanges Program in UEC. T2 - Seminar Series on Smelling Drones CY - Tokyo, Japan DA - 28.11.2023 KW - Mobile robotic olfaction KW - Nano aerial robot KW - Gas source localization KW - Bouts KW - Distributed robotics KW - Swarm PY - 2023 AN - OPUS4-59131 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Plarre, Rüdiger T1 - It's just a point of view – Destructions and creations of cultural objects by artifact pests N2 - Woodworms, carpet beetles, clothes moths and termites are well known pests on artifacts of cultural importance. Lately also silverfish have gained importance. Protection of our cultural heritage for future generations is not a new task but the methods have changed. Conventional use of pesticides in the past has preserved precious objects up to the presence, which otherwise probably would have been lost over time due to the destruction by insects and microbes. However, several of the objects were contaminated with poisons in such a manner that they became unsafe to be handled and thus are useless for exhibitions or scientific studies. Today, the concept of Integrated Museum Pest Management (IMPM) provides guidance for non-residue treatments of infested objects, followed by save storage or display under pest free (or maximum pest reduced) environments. Inert fumigants, physical and biological control measure, precise monitoring, threshold evaluations and detailed knowledge of the pest`s biology are key elements within IMPM. Woodworms, clothes moths and termites, however, are not always considered as only pests. Some professionals have also used them to produce new pieces of art or for the installation of ephemeral displays. Under more or less controlled conditions, the insects´ destructive nature on wood or textiles has been turned around to a process of creation with aesthetic or philosophical messages. Destructive or creative - it just depends on the point of view! T2 - XII European Congress of Entomology CY - Heraklion, Greece DA - 16.10.23 KW - Museum Pests KW - Integrated Museum Pest Management (IMPM) KW - Cultural Entomology PY - 2023 AN - OPUS4-58651 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bresch, Harald T1 - OECD TG 125 Particle size and size distribution of Nanomaterials N2 - This presentation was held in an OECD Webinar introducing the newly developed and published OECD TG 125 on particle size and size distribution. The presentation is explaining the structure if the TG 125 and addresses all included methods and methodologies in a short and understandable way for the broader public. The presentation includes sections about nano-particles and nano-fibres. T2 - Webinar Series on Testing and Assessment Methodologies CY - Online meeting DA - 07.02.2023 KW - Nano KW - Nanomaterials KW - OECD KW - Test guideline KW - Size PY - 2023 UR - https://www.oecd.org/chemicalsafety/nanomet/presentations-webinar-nanomaterials-particle-size-distribution-test-guideline-125.pdf AN - OPUS4-58447 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Normungsroadmap Circular Economy - Inhalte und Ansätze zur Umsetzung N2 - Der Vortrag umfasst eine Einsortierung der Circular Economy in der Normung, skizziert die Inhalte der DIN/DKE/VDI-Normungsroadmap Circular Economy bezüglich Digitalisierung, Elektrotechnik und IKT sowie Batterien und zeigt Schnittstellen zur Politik. Zum Schluss zeigt der Vortrag erste Ansätze zur Umsetzung der in der Normungsroadmap beschriebenen Normungsbedarfe. T2 - EXFO 2023 Global Environmental Compliance - Ecodesign & Nachhaltigkeit CY - Online meeting DA - 23.03.2023 KW - Circular Economy KW - Kreislaufwirtschaft KW - Normung KW - Ressourceneffizienz KW - Materialeffizienz PY - 2023 AN - OPUS4-57205 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Normative Kernbedarfe einer Circular Economy N2 - Vorstellung von Schlüsselgremien und Aktivitäten bzgl. der Schaffung einer normativen und untergesetzlichen Basis zur Etablierung einer Circular Economy. T2 - Fraunhofer IZM AK Rechtskonformes Umweltmanagement CY - Berlin, Germany DA - 28.02.2023 KW - Circular Economy KW - Kreislaufwirtschaft KW - Produkteffizienz KW - Materialeffizienz KW - Europäische Kommission PY - 2023 AN - OPUS4-57054 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meermann, Björn T1 - Single cell ICP-ToF-MS as a powerful tool in environmental and material research N2 - Materials are key for our modern communities. In particular metals play important roles in all areas of our daily life - from building materials to high tech products. Due to the increasing consumption of metals and corresponding waste production, an elevated release into the environment takes place. Furthermore, metals in direct contact with the environment undergo corrosion leading to a release into the (aquatic) environment. Thus, lifespan of products/buildings are substantially reduced – hence unnecessary economic costs arise. Thus, research in this regard is needed within the force field of metal/material - environment. Evaluating the environmental impact of materials as well as developing “safe” materials, new analytical methods are highly needed. One promising powerful tool is single cell-ICP-ToF-MS for multi-elemental analysis on a single cell/organism level. Within this presentation the concept, strength as well as challenge of single cell-ICP-MS are briefly introduced. Two application examples are presented: (i) assessing the environmental impact of metals and (ii) the impact of the environment on metal-based materials and the derivation of potential environmental-friendly material protection strategies. These applications highlight the strength of new analytical approaches to explore the durability and safety of newly developed materials. Thus, analytical chemistry is one corner stone to transformation of modern society into circular economy (CEco). (i) Diatoms are located at the bottom of the food chain. Thus, toxicological relevant metals taken up by diatoms possibly accumulate within the food web causing harmful effects. Diatoms are common test system in ecotoxicology. To investigate potential metal uptake and effects, we developed an on-line single cell-ICP-ToF-MS approach for multi-elemental diatom analysis. Our approach is a new potential tool in ecotoxicological testing for metal-based materials. (ii) Next to classical corrosion processes, microorganisms are responsible for so called microbially influenced corrosion (MIC). MIC is a highly unpredictable process relying on interaction pathways between cells and the metal surface. Sheding light on MIC processes and derivate potential protection strategies, we applied single cell-ICP-ToF-MS for MIC research on a single bacteria/archaea level. It turned out that microorganism are taking up particular metals from alloys - thus, single bacteria-ICP-ToF-MS will enable development of corrosion protection strategies. T2 - SCIX 2022 CY - Cincinnati, OH, USA DA - 02.10.2022 KW - Single cell-ICP-ToF-MS KW - Algae KW - MIC PY - 2022 AN - OPUS4-56542 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Loose, Florian T1 - Forschungsprojekt CF Pyro: Sichere Nutzung von Carbonfasern als Sekundärrohstoff in der Pyrometallurgie N2 - Obwohl der Leichtbau mit carbonfaserverstärkten Kunststoffen (CFK) einen wichtigen Beitrag zum Klimaschutz und zur Ressourceneffizienz liefert, stellt der wachsende Abfallstrom von aktuell 62 kt/a eine große Herausforderung dar. Weil die Produktion von Carbonfasern (CF) überwiegend auf fossilen Rohstoffen basiert und sehr energieintensiv ist, werden nachhaltige Recyclinglösungen dringend benötigt. Hier wird ein Überblick über aktuelle Recyclingprozesse gegeben und deren Limitierungen diskutiert. Darüber hinaus wird eine Möglichkeit zur sicheren chemischen Nutzung von CF-haltigen Reststoffen aufgezeigt, die nicht zur Wiederverwertung geeignet sind. Das Projekt CF Pyro untersucht deren Einsatz als Sekundärrohstoff in der Pyrometallurgie und setzt besondere Schwerpunkte bei der Reaktivität von CF, der Prozessstabilität und der Vermeidung von Emissionen gesundheitsschädlicher WHO-Fasern. Abschließend wird eine, auf den experimentellen Ergebnissen und im Dialog mit Expertinnen und Experten aus Wirtschaft, Wissenschaft und Politik entwickelten, Technologiebewertung vorgestellt. T2 - BMUV Behördenklausur 2024 CY - Berlin, Germany DA - 03.07.2024 KW - Leichtbau KW - Carbonfasern KW - Recycling KW - CFK PY - 2024 AN - OPUS4-60570 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogel, Christian T1 - Per- and polyfluoroalkyl substances (PFAS) in sewage sludge and wastewater-based fertilizers and future PFAS remediation N2 - Per- and polyfluoroalkyl substances (PFAS) are a group of anionic, cationic and zwitterionic synthetic products, in which the hydrogen atoms on the carbon skeleton of at least one carbon atom have been completely replaced by fluorine atoms and which include more than 4730 compounds, depending on the definition. As a result of continuous and prolific use, mainly in aviation firefighting foams, thousands of industrial and military installations have been found to contain contaminated soil, groundwater and surface water. As a result of the perpetual use of PFAS containing products, effluents and sewage sludge from wastewater treatment plants (WWTPs) have been observed to be an important pathway for PFAS into the environment. In Germany, phosphorus and other nutrients from sewage sludge and wastewater should be recycled in WWTPs of cities with a large population. However, it is not clear if PFAS contamination from wastewater and sewage sludge end up in novel wastewater-based fertilizers. Normally, PFAS are analyzed using PFAS protocols typically with liquid chromatography tandem mass spectrometry (LC-MS/MS) quantification. To get a better overview of the amount of “total PFAS,” we applied sum parameter methods based on combustion ion chromatography (CIC) to screen the PFAS contaminations in various sewage sludge and wastewater-based fertilizers. Furthermore, current decontamination strategies of PFAS-burdened soils mainly consist of adsorption methods using adsorbents for fixation of PFAS in the ground. A second option is the utilization of a “pump and treat” process, cycling polluted soils through a washing plant leading to the concentration of the pollutants in the fine fraction. Only a subsequent, high-energy consuming pyrolysis process guarantees the total destruction of all fluorinated organic contaminants. Both approaches are cost-intensive and not intended for the direct decomposition of all PFAS contaminants. Hence, there is a great demand for innovative developments and chemical treatment technologies, dealing with new strategies of tackling the PFAS problem. T2 - Seminar of Ben-Gurion University CY - Midreshet Ben-Gurion, Israel DA - 02.11.2022 KW - PFAS KW - Sewage sludge KW - XANES spectroscopy PY - 2022 AN - OPUS4-56166 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Circular Economy - Materialeffizienznormen und -leitfäden N2 - Deutschland befindet sich inmitten eines umfassenden Transformationsprozesses hin zu einer klimaneutralen und nachhaltigen Wirtschaft und Gesellschaft. Sowohl das Erreichen der Klimaziele als auch die Anpassung an die Folgen des Klimawandels fordern ein rasches, bestimmtes und gleichzeitiges Handeln in vielen Sektoren und Lebensbereichen. Normen und Standards können einen wichtigen Beitrag zum Erreichen dieser Ziele leisten. So haben Normungsorganisationen weltweit mit der ISO London Declarationeinen Pakt zur Unterstützung des Klimas geschlossen. Das bestehende Normenwerk muss auf Klimawandel-Tauglichkeit überprüft und eine Überarbeitung angestoßen werden. Der Klimawandel als Querschnittsthema betrifft alle Wirtschaftszweige, und daher bieten DIN, DKE und VDI mit dieser durch Impulsvorträge eingeleiteten Diskussionsreihe eine Plattform zum Austausch über Normung als Werkzeug zum Thema Klima mit allen Akteuren. T2 - DIN/DKE/VDI-Frühstücksreihe: Klima und Normung CY - Berlin, Germany DA - 08.11.2022 KW - Circular Economy KW - Ökodesign KW - Materialeffizienz KW - Ressourceneffizienz KW - Energieeffizienz KW - Produktdesign PY - 2022 AN - OPUS4-56183 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogel, Christian T1 - Per- und polyfluorierte Alkylsubstanzen (PFAS) im Klärschlamm - Analytische Methoden und Grenzwerte N2 - Per- und Polyfluoralkylsubstanzen (PFAS) sind eine Gruppe von mehr als 4700 anionischen und kationischen anthrophonen Stoffen, die aufgrund ihrer inerten chemischen Stabilität und ihrer Widerstandsfähigkeit gegen den Abbau durch Hitze oder Säuren in einer Vielzahl von Produkten verwendet werden. Infolge der ständigen Verwendung, vor allem in Feuerlöschschäumen für die Luftfahrt, wurden in Tausenden von Industrie- und Militäranlagen kontaminierte Böden und Grundwasservorkommen gefunden. Aufgrund der ständigen Verwendung von fluorierten Konsumgütern haben sich jedoch auch Abwässer und Klärschlamm aus Kläranlagen als Quelle für die Kontamination der aquatischen Umwelt mit PFAS erwiesen. Infolge der strengeren Vorschriften und Beschränkungen, die in den letzten Jahren für die Verwendung langkettiger (≥C8) PFAS erlassen wurden, findet in der chemischen Industrie eine deutliche Verlagerung hin zur Herstellung kurz- (C4-C7) und ultrakurzkettiger (C1-C3) Alternativen statt. Mit der Novellierung der Klärschlammverordnung im Jahr 2017 hat der deutsche Gesetzgeber die Ausbringung von Klärschlamm auf landwirtschaftlichen Flächen verboten, und bis 2029/2032 wird die Ausbringung von Klärschlamm in der Landwirtschaft vollständig verboten sein. Während die Belastung der Umwelt mit organischen Schadstoffen wie PFAS, Pestiziden und Arzneimitteln nicht mehr erwünscht ist, muss Phosphor (P) aus Klärschlamm weiterhin zur Herstellung hochwertiger P-Dünger für eine Kreislaufwirtschaft genutzt werden. Derzeit können pflanzenverfügbare P-Düngemittel aus Klärschlamm/Abwasser mit verschiedenen Behandlungsmethoden hergestellt werden, darunter Fällung, Auslaugung und thermische Behandlung. Der Verbleib von PFAS bei der Auslaugung, Ausfällung und Behandlung von Klärschlamm und Abwasser ist jedoch noch weitgehend unbekannt. T2 - Berliner Klärschlammkonferenz CY - Berlin, Germany DA - 14.11.2022 KW - Klärschlamm KW - Per- and Polyfluoroalkyl substances (PFAS) KW - Phosphor KW - Düngemittel PY - 2022 AN - OPUS4-56291 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. T1 - Mobile Applications with Drones/Robots - Aerial- and Ground-based Gas Tomography N2 - Remote gas sensors mounted on mobile robots enable the mapping of gas distributions in large or poorly accessible areas. A challenging task however, is the generation of three-dimensional distribution maps from these spatially sparse gas measurements. To obtain high-quality reconstructions, the choice of optimal measuring poses is of great importance. Remote gas sensors, that are commonly used in Robot Assisted Gas Tomography (RAGT), require reflecting surfaces within the sensor’s range, limiting the possible sensing geometries, regardless of whether the robots are ground-based or airborne. By combining ground and aerial robots into a heterogeneous swarm whose agents are equipped with reflectors and remote gas sensors, remote inter-robot gas measurements become available, taking RAGT to the next dimension – releasing those constraints. In this paper, we demonstrate the feasibility of drone-to-drone measurements under realistic conditions and highlight the resulting opportunities. T2 - ISOCS Short Course Winter 2023 CY - Bormio, Italy DA - 16.01.2023 KW - Aerial robot KW - Ground robot KW - Gas tomography KW - Inter-robot measurements KW - Plume KW - TDLAS PY - 2023 AN - OPUS4-56872 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Braymer, Joseph J. T1 - Cytosolic Fe/S Protein Biogenesis -a focus on [2Fe-2S] proteins- N2 - Iron-Sulfur (Fe/S) protein biogenesis in the cytosol is an essential process for the proper maturation of many proteins and enzymes required for cellular function. Between the two types of Fe/S cofactors, recent work has been uncovering the dependencies of [2Fe-2S] cluster on the known Fe/S protein biogenesis machineries and how they may be trafficked in the cytosol. New insights will here be discussed in addition to the discovery of a newly identified cytosolic [2Fe-2S] binding protein. T2 - DFG SPP1927 Final Meeting CY - Potsdam, Germany DA - 29.09.2024 KW - Metalloproteins KW - Iron-sulfur clusters KW - Spectroscopy KW - Yeast PY - 2024 AN - OPUS4-61516 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Leers, K. A1 - Herzel, Hannes T1 - Untersuchungen zur agronomischen Wirksamkeit des R-Rhenania Phosphats aus der ersten großtechnischen Anlage N2 - Aufgrund ihrer Phosphorgehalte bieten Klärschlammaschen (KSA) Potentiale für die Herstellung von Phosphatdüngern. Da die agronomische Wirksamkeit von KSA häufig gering ist, bedarf es einer Aufbereitung. Diese kann sowohl vor oder während der Verbrennung des Klärschlamms als auch nachgeschaltet durch eine Aufbereitung der KSA erfolgen. Mit dem nachgeschalteten, thermochemischen AshDec® Verfahren können unter Hinzugabe eines Natrium-Additivs bereits wirksame aschebasierte Düngerprodukte aus KSA hergestellt werden. Im Rahmen des BMBF-Projekts „R-Rhenania“ wurde auf dieser Basis ein thermochemisches Verfahren für eine Rostfeuerung entwickelt, bei dem die Zugabe des Natrium-Additivs direkt bei der Klärschlammverbrennung erfolgt. So sollen die hochwirksamen aschebasierten Dünger direkt bei der Klärschlammverbrennung entstehen (R-Rhenania-Prozess). Der Vergleich von Produkten aus beiden Prozessen (R-Rhenania und nachgeschaltetes AshDec Verfahren) zeigt, dass die chemische Zusammensetzung vergleichbar ist. In Versuc T2 - Berliner Klärschlamm Konferenz CY - Berlin, Germany DA - 11.11.2024 KW - Phosphor KW - Recycling KW - Dünger KW - Monoverbrennung KW - Klärschlamm PY - 2024 AN - OPUS4-61908 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Oberbeckmann, Sonja T1 - The Microplastic Microbiome N2 - Microplastics represent man-made and newly emerging surfaces in our ecosystems, where they interact with microorganisms. The ecosystem in focus of this presentation will be the aquatic environment. It will be portrayed, which microorganisms use microplastics as a habitat, how environmental factors shape this colonization, and why the biodegradation of plastics in the ocean is an overall unlikely process. We will also discuss whether potentially pathogenic microorganisms use microplastics as a raft. Finally, possible adaptation mechanisms of plastic-colonizing microorganisms will be presented, such as the production of photoreactive molecules. The microplastic microbiome has a large potential to harbor so far unknown species with curious traits, representing an exciting research topic for the future. T2 - Geomicrobiological and Geochemical Colloquium, GFZ CY - Potsdam, Germany DA - 20.02.2024 KW - Microplastics KW - Microbiome KW - Biofilm PY - 2024 AN - OPUS4-60203 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Stand der Durchführungsmaßnahmen und delegierte Rechtsakte - Zusammenfassung und Ausblick N2 - Übersicht über den Aktuellen Stand der Durchführungsmaßnahmen der EU zur Ökodesign-Richtlinie sowie der delegierten Rechtsakte zum EU Energielabel. Der Fokus liegt auf die Änderungen bzgl. gesetzlicher Anforderungen, die Überwachung durch die Vollzugsbehörden und mögliche diesbezügliche Informationsquellen. T2 - Praxisworkshop Marktüberwachung EVPG / EnVKG CY - Weilburg, Germany DA - 14.05.2024 KW - Ecodesign KW - EU Energy Label KW - Policy making KW - Market suveillance PY - 2024 AN - OPUS4-60409 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Circular Economy bei der BAM - neu und etabliert zugleich N2 - Übersicht über BAM-Aktivitäten, die ebenfalls der BAM zugeordnet werden können, der Gründung des Aktivitätsfeldes Circular Economy innerhalb der BAM sowie die zukünftige Ausrichtung und Aktivitäten der BAM zu Themen der Circular Economy. T2 - Besuch des Bachelorstudiengangs im Fachbereich Material Knowledge der Fachhochschule Potsdam CY - Berlin, Germany DA - 28.05.2024 KW - Circular Economy PY - 2024 AN - OPUS4-60410 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Rechtsetzungbegleitende Normung zur Circular Economy von Produkten - Beispiel IKT N2 - Überblick über Aktionspläne, Initiativen und Maßnahmen der EU zur Steigerung der Zirkularität von Produkten aus der Informations- und Kommunikationstechnik. Des Weiteren eine Übersicht über relevante nationale und europäische Normungsgremien und die Beteiligung der BAM. T2 - Gründungssitzung des Forschungsfabrik Mikroelektronik Deutschland (FMD) CY - Online meeting DA - 31.01.2024 KW - Circular Economy KW - ESPR KW - Energy labelling KW - Normung KW - Policy making KW - Standardization PY - 2024 AN - OPUS4-60397 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Circular Economy in der EU - ein neues Verständnis für Produkteffizienz, die EN4555x-Reihe und weitere Beipiele N2 - Übersicht über die Umsetzung des EU Green New Deal, des Circular Economy Action Plan sowie der Sustainable Product Initiative. Ebenfalls erfolgt eine Zusammenfassung der Auswirkungen der Änderungen im EU-Produktrecht auf die Revision des geltenden Rechts und das Zusammenspiel zwischen Rechtssetzung und Normung. T2 - Besuch des Bachelorstudiengangs im Fachbereich Material Knowledge der Fachhochschule Potsdam CY - Berlin, Germany DA - 28.05.2024 KW - Circular Economy KW - ESPR KW - Material efficiency KW - Normung KW - Policy making KW - Labelling PY - 2024 AN - OPUS4-60407 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogel, Christian T1 - PFAS analysis by fluorine K-edge XANES spectroscopy and thermal and mechanochemical treatment N2 - Per- and polyfluoroalkyl substances (PFAS) are a large group of more than 12,000 organofluorine surfactants. As a result of continuous and prolific use, mainly in aviation firefighting foams, thousands of industrial and military installations have been found to contain contaminated soil, groundwater and surface water. . Current decontamination strategies of PFAS-burdened soils mainly consist of adsorption methods using adsorbents for fixation of PFAS in the ground. A second option is the utilization of a “pump and treat” process, cycling polluted soils through a washing plant leading to the concentration of the pollutants in the fine fraction. Both approaches are cost-intensive and not intended for the direct decomposition of all PFAS contaminants. Furthermore, the contaminated adsorbants have to be safely thermal treated for recovery. Hence, there is a great demand for innovative developments, dealing with new strategies of tackling the PFAS problem. Previously, mechanochemical treatment of polychlorinated organic compounds in soils showed an efficient dechlorination. Thus, we investigated mechanochemical treatment of PFAS contaminated soils with various additives in a ball mill. T2 - SEMICON CY - Tokyo, Japan DA - 12.12.2024 KW - Mechanochemical treatment KW - Per- and Polyfluoroalkyl substances (PFAS) KW - XANES spectroscopy KW - Thermal treatment PY - 2024 AN - OPUS4-62183 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meermann, Björn T1 - Analytical Approaches for PFAS Sum-parameter Analysis – From Materials to Environment N2 - PFAS sind emerging pollutants und sind omnipräsent – sowohl in vielen Produkten als auch in der Umwelt. Aufgrund der Vielzahl an verschiedenen Verbindungen werden dringend neue Analytische Methoden zum Nachweis der PFAS benötigt. Im Rahmen meines eingeladenen Vortrags werden neue elementanalytische Summenparameterverfahren, die in meinem Fachbereich entwickelt wurden, vorgestellt. T2 - Analytisches Seminar Uni Duisburg Essen CY - Duisburg, Germany DA - 26.02.2024 KW - PFAS KW - HR-CS-GFMAS KW - Sum parameter PY - 2024 AN - OPUS4-62240 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meermann, Björn T1 - Analytical Approaches for PFAS Sum-parameter Analysis – From Materials to Environment N2 - PFAS sind emerging pollutants und sind omnipräsent – sowohl in vielen Produkten als auch in der Umwelt. Aufgrund der Vielzahl an verschiedenen Verbindungen werden dringend neue Analytische Methoden zum Nachweis der PFAS benötigt. Im Rahmen meines eingeladenen Vortrags werden neue elementanalytische Summenparameterverfahren, die in meinem Fachbereich entwickelt wurden, vorgestellt. T2 - GDCh Kolloquium CY - Freiberg, Germany DA - 29.05.2024 KW - PFAS KW - HER-CS-GFMAS KW - Evolution of pollution PY - 2024 AN - OPUS4-62241 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meermann, Björn T1 - Element Analytical Methods for a Sustainable Transformation of our Society N2 - Ressourcenknappheit benötigt alternative Strategien, um auch nachfolgenden Generationen eine lebenswerte Welt zu erhalten und einen guten Lebensstandard zu gewährleisten. Ein wesentlicher Beitrag hierzu wird die Transformation unserer Gesellschaft hin zu einer Kreislaufwirtschaft (CEco) sein. Bisher ist unsere Wirtschaft nicht dahingehend ausgelegt – ein wesentlicher Beitrag muss seitens der Analytischen Chemie kommen – nur hierüber können Qualitätsstandards und –kontrolle gewährleistet werden Im Rahmen meines eigeladenen Vortrags werden elementanalytisch Methoden, die in meinem Fachbereich entwickelt/angewendet werden, für eine CEco vorgestellt. T2 - Analytica Conference CY - Munich, Germany DA - 11.04.2024 KW - PFAS KW - HR-CS-GFMAS KW - Sum parameter PY - 2024 AN - OPUS4-62242 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meermann, Björn T1 - Discrete element and isotope analytical methods for a sustainable transformation of our society N2 - Ressourcenknappheit benötigt alternative Strategien, um auch nachfolgenden Generationen eine lebenswerte Welt zu erhalten und einen guten Lebensstandard zu gewährleisten. Ein wesentlicher Beitrag hierzu wird die Transformation unserer Gesellschaft hin zu einer Kreislaufwirtschaft (CEco) sein. Bisher ist unsere Wirtschaft nicht dahingehend ausgelegt – ein wesentlicher Beitrag muss seitens der Analytischen Chemie kommen – nur hierüber können Qualitätsstandards und –kontrolle gewährleistet werden. Im Rahmen meines eigeladenen Vortrags werden elementanalytisch Methoden, die in meinem Fachbereich entwickelt/angewendet werden, für eine CEco vorgestellt. T2 - Summer school CY - Poland DA - 31.07.2024 KW - Elemental analysis KW - Division 1.1 KW - Environment - material PY - 2024 AN - OPUS4-62245 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meermann, Björn T1 - Was macht eigentlich der AK Meermann an der BAM in Berlin? N2 - Der Vortrag wurde im Rahmen des PhD Seminars in Hohenroda de AK Sep. Sciences der GDCh gehalten.Hierin habe ich die Forschungsschwerpunkte meines Fachbereichs vorgestellt und einen Überblick über meine Forschungs-Themenbreite gegeben. T2 - PhD Seminar Hohenroda CY - Hohenroda, Germany DA - 09.01.2024 KW - Umwelt KW - Material KW - Elementanalytik PY - 2024 AN - OPUS4-62246 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Loose, Florian T1 - Carbon Fibers as Secondary Resource - Safety during application in pyrometallurgy N2 - Transformation technologies rely on lightweight construction based on carbon fibers (CF). Therefore, carbon fiber-reinforced plastics (CFRP) make an important contribution to climate protection and resource efficiency. Nevertheless, the waste stream of approximately 62 kt/a poses a major challenge. Because the energy intensive production of CF is predominantly based on fossil raw materials, sustainable recycling solutions are pushed forward. The currently predominating role mechanical recycling loses attractiveness and the market share of processes recovering the high value fibers by pyrolysis or solvolysis raise in importance. Nevertheless, fibers that are to short to continue circulating, analogous to paper fibers, demand for a safe treatment. Because energetic is not feasible due to an incomplete conversion in conventional waste treatment facilities. To circumvent the chemical limitations of the conversion, new reaction pathways need to be opened. Therefore, the CF Pyro project investigates the application of CF containing waste streams as a secondary raw material in pyrometallurgy, replacing fossil coal. It places particular emphasis on the reactivity of CF, process stability and the avoidance of emissions of harmful WHO fibers. Finally, a technology assessment based on the experimental results and developed in dialog with experts from industry, science and politics is presented. T2 - Workshop on releases of critical fibres CY - Dortmund, Germany DA - 13.09.2024 KW - Cabon Fibers KW - Recycling KW - Waste Treatment KW - Secondary Resource KW - Pyrometallurgy PY - 2024 AN - OPUS4-61278 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-C. T1 - Normung bei der politischen Entscheidungsfindung N2 - Die Realisierung von Nachhaltigkeitszielen und die Umsetzung der Klimastrategien stützt sich in der Regel auf zwei zentrale Säulen. Erstens, die kontinuierliche Senkung der eigenen Emissionen durch Maßnahmen zur Energieeffizienz sowie die Erreichung von CO2-Neutralität. Zweitens, ein optimiertes Ressourcenmanagement durch ein intelligentes Vermeidungskonzept. Für die Umsetzung der Ziele sind verlässliche Daten und Methoden erforderlich, die eine vergleichbare Erfassung der CO2-Emissionen ermöglichen. Aktuell existieren einige Normen, Standards und Richtlinien, die mit unterschiedlichem Erfolg und Tiefe zur Bestimmung der CO2-Bilanz angewendet werden. Eine transparente Bestimmung des Produkt-Kohlenstoff-Fußabdrucks (PCF) fördert die Kommunikation umweltfreundlicher Praktiken und stärkt das Vertrauen der Verbraucher. Zudem sind Unternehmen gefordert, ihre Kosten zu senken, um wettbewerbsfähig zu bleiben. In diesem Kontext kann die Analyse des PCF dazu beitragen, ineffiziente Prozesse aufzudecken und dadurch Kosteneinsparungen zu erzielen.. Der Workshop der Forschungsfabrik Mikroelektronik richtete sich an Unternehmen und Einrichtungen, die ihren jeweiligen PCF im gesamten Produktionsprozess bereits ermittelt haben oder an diejenigen Institutionen, die es in Zukunft anstreben (müssen). Der Vortrag zur Rolle der Normung in der Rechtssetzung stellte den Auftakt der Diskussion dar, inwiefern Normung den oben genannten Prozess begleitet und ggf. Trends setzt. T2 - Forschungsfabrik Mikroelektronik Deutschland CY - Berlin, Germany DA - 28.11.2024 KW - Circular economy KW - Normung KW - Standardization KW - Rechtssetzung KW - Policy making KW - Product carbon footprint KW - Life cycle assessment PY - 2024 AN - OPUS4-62021 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-C. T1 - Perspectives of EU's Products Circularity N2 - Der Vortrag fasst den aktuellen Stand der EU-Rechtsetzung und -Normung zur Produkteffizienz zusammen. Der Schwerpunkt liegt auf den Schnittmengen beider Wirkungskreise und möglichen Perspektiven zur gemeinsamen Weiterentwicklung. Ebenfalls werden Synergien bzgl. der aktuell parallelen Entwicklungsstränge aufgezeigt. T2 - The International Institute for Industrial Environmental Economics CY - Online meeting DA - 22.11.2024 KW - Circular economy KW - Product efficiency KW - Standardization KW - Policy making KW - Ecodesign PY - 2024 AN - OPUS4-62022 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Behrens, Frauke T1 - Der Akkreditierungsbeirat und seine Fachbeiräte N2 - Präsentiert werden der Strukturen, Aufgaben und Arbeitsweise des Akkreditierungsbeirats und seiner Fachbeiräte, insbesondere des Fachbeirates 4.2 Chemie/Umwelt auf Basis des Akkreditierungsstellengesetzes. T2 - 55. Sitzung der Bund/Länder-Arbeitsgemeinschaft Chemikaliensicherheit (BLAC) CY - Rostock, Germany DA - 17.09.2024 KW - Akkreditierung KW - Chemie und Umwelt KW - Akkreditierungsbeirat KW - Fachbeirat KW - Akkreditierungsstellengesetz PY - 2024 AN - OPUS4-61901 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Braymer, Joseph T1 - Cytosolic Fe/S Protein Biogenesis -a new [2Fe-2S] protein- N2 - Iron-Sulfur (Fe/S) protein biogenesis in the cytosol is an essential process for the proper maturation of many proteins and enzymes required for cellular function. Between the two types of Fe/S cofactors, recent work has been uncovering the dependencies of [2Fe-2S] cluster on the known Fe/S protein biogenesis machineries and how they may be trafficked in the cytosol. New insights will here be discussed in addition to the discovery of a newly identified cytosolic [2Fe-2S] binding protein. T2 - Invited talk at University of Potsdam, Institute of Biochemistry and Biology CY - Potsdam, Germany DA - 29.11.2024 KW - Metalloproteins KW - Iron-sulfur clusters PY - 2024 AN - OPUS4-62144 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Umsetzung der Ökodesign-Verordnung - Wie wird die Beteiligung der relevanten Stakeholder organisiert? N2 - Überblick über die nationale und europäische Stakeholder-Konsultation zu EU-Rechtssetzungsprozessen zur Ökodesign-Rahmenverordnung (ESPR) und diesbezüglicher Produktverordnungen, sowie Benennung von Möglichkeiten der Stakeholder-Koordination durch Normungsorganisationen. T2 - BDI AK Circular Economy CY - Online meeting DA - 18.03.2025 KW - Circular economy KW - Rechtssetzung KW - Normung KW - Politikberatung KW - Ecodesign PY - 2025 AN - OPUS4-62735 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Circular Economy - Umsetzung: Wer, was, wo, wie? N2 - Der Vortrag gibt komplementär zu der Theorie der Circular Economy und der technischen Umsetzung sowie Forschung einen Überblick über die aktuellen Entwicklungen in der Politik und Normung. Es werden die Schlüssel-Stakeholder und -gremien inkl. ihrer Wirkungsradien und der Schnittstellen miteinander vorgestellt. Des Weiteren erfolgt ein Überblick und Erklärungen zu Webseiten der Europäischen Kommission mit allgemeinen Inhalten zur Rechtslandschaft der Circular Economy und Möglichkeiten der Beteiligung. T2 - Besuch FH-Potsdam Circular Product Design CY - Berlin, Germany DA - 21.01.2025 KW - Circular economy KW - Rechtssetzung KW - Normung KW - Politikberatung PY - 2025 AN - OPUS4-62443 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seher, Julia T1 - Hydrothermalgranulate - Verwertungsmöglichkeit für Mauerwerkbruch N2 - Jährlich fallen in Deutschland etwa 75 Mio. t mineralische Bau- und Abbruchabfälle an, die eine vielfältig einsetzbare sekundäre Rohstoffquelle darstellen. Trotz hoher Verwertungsquoten werden Bau- und Abbruchabfälle zum Teil deponiert oder nur in Anwendungen mit geringen Qualitätsanforderungen eingesetzt, weil geeignete hochwertige Verwertungswege für solche sehr heterogen zusammengesetzte Körnungen mit hohem Feinanteil fehlen. Der Reststoff Mauerwerkbruch ist ein heterogenes SiO2-reiches Gemisch aus Ziegel-, Beton- und Leichtbeton-, Kalksandstein- und Porenbetonbruch sowie Putz- und Mörtelanhaftungen. Die uneinheitliche Zusammensetzung und mehr als 50 % Feinanteile durch die mechanische Aufbereitung verhindern eine unmittelbare Wiederverwertung als rezyklierte Gesteinskörnung. Eine Möglichkeit der effektiven Verwertung von Mauerwerkbruch stellt das rohstoffliche Recycling über einen hydrothermalen Stoffumwandlungsprozess dar, bei dem poröse Granulate entstehen. Aus den Eigenschaften der Hydrothermalgranulate, insbesondere ihrer Porenstruktur, ergeben sich Anwendungsmöglichkeiten als Filter- oder Speichermaterial, d. h. auch in Bereichen, die über den Bausektor hinausgehen. Hierbei können die Granulate Gesteinskörnungen natürlichen Ursprungs, z. B. Lavasand und Bims, oder aus natürlichen Rohstoffen hergestellte Körnungen, z. B. Blähtone, ersetzen. Somit wird ein Beitrag zur Schonung natürlicher Ressourcen und zur Energieeinsparung im Vergleich zur Blähtonherstellung geleistet. Ziel des ZIM-Kooperationsprojekts „HYTEGRA – Hydrothermalgranulate“ war die Entwicklung des Verfahrens zur Herstellung leichter Gesteinskörnungen durch die hydrothermale Behandlung eines Gemischs quarz- und kalkreicher Reststoffe. Als Ausgangsstoffe dienten ziegelhaltiger Mauerwerkbruch als SiO2-Träger und Papierasche aus dem Altpapierrecycling als CaO-Träger. Die vollständige Prozesskette von der mechanisch-physikalischen Aufbereitung der Reststoffe über die Formgebung der Grüngranulate bis zur hydrothermalen Härtung der Leichtgranulate wurde im Labormaßstab entwickelt und erprobt. Die Anwendung der Hydrothermalgranulate als Speichermaterial zur inneren Nachbehandlung von Beton und als Pflanzsubstrat sowie als Filtermaterial in Bodenfiltern zur Abwasserbehandlung wurde untersucht. Im Vortrag wird ein Überblick über die Ergebnisse des erfolgreich abgeschlossenen Projekts „HYTEGRA“ gegeben. T2 - Kolloquium der Leibniz-Sozietät der Wissenschaften zu Berlin: Die Energiewende 2.0 - Im Fokus: Die Stoffwirtschaft CY - Potsdam, Germany DA - 09.06.2023 KW - Mauerwerkbruch KW - Poröse Granulate KW - Rohstoffliches Recycling KW - Papierasche KW - Leichte Gesteinskörnung PY - 2023 AN - OPUS4-57639 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bonse, Jörn T1 - Advances in ultrafast laser manufacturing: nanostructures, thin films, and scaling perspectives N2 - Advanced ultrafast laser technology is a rapidly growing field that currently enables many new industrial and scientific applications. During the last decades, this has been significantly driven by the availability of high-repetition-rate laser sources and novel beam delivery concepts. At the laser side, Moore’s law equally manifests for ultrafast laser technologies, since the average output power of such lasers doubles approximately every two years. This development is mainly driven by the increase of the pulse repetition rates of energetic laser pulses, currently enforcing the development of smart beam control and novel scanning strategies for preventing heat-accumulation and plasma-shielding effects during laser-based materials processing. This keynote presentation addresses the advantages, recent developments, and perspectives of laser processing with ultrashort laser pulses. A special focus is laid on the tailored structuring of thin films as well as the manufacturing and probing of sub-diffraction surface nanostructures – an ongoing race to extreme scales. Current limitations are identified and an outlook to future scaling perspectives will be provided. T2 - SPIE Photonics Europe 2024 Conference, Symposium "Lasers and Photonics for Advanced Manufacturing" CY - Strasbourg, France DA - 07.04.2024 KW - Ultrafast laser processing KW - Laser-induced periodic surface structures (LIPSS) KW - Surface functionalization KW - Laser technology KW - Time-resolved analysis PY - 2024 UR - https://spie.org/photonics-europe/presentation/Advances-in-ultrafast-laser-manufacturing--nanostructures-thin-films-and/13005-36#_=_ AN - OPUS4-59852 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pauw, Brian Richard T1 - Glimpses of the future: Systematic investigations of 1200 mofs using a highly automated, full-stack materials research laboratory N2 - By automatically recording as much information as possible in automated laboratory setups, reproducibility and traceability of experiments are vastly improved. This presentation shows what such an approach means for the quality of experiments in an X-ray scattering laboratory and an automated synthesis set-up. T2 - Winter School on Metrology and Nanomaterials for Clean Energy CY - Claviere, Italy DA - 28.01.2024 KW - Digitalization KW - Automation KW - Digital laboratory KW - Scattering KW - Synthesis KW - Nanomaterials KW - Holistic science PY - 2024 AN - OPUS4-59621 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trappe, Volker T1 - Advanced lightweight applications – recycling versus reliability and fossil energy footprint N2 - Advanced light weight applications like aircrafts and wind turbine blades are made of fibre reinforced plastics (FRP) with continuous fibre reinforcement and must withstand a high thermo-mechanical cyclic loading. The quality of the fibre matrix interface has a high impact on the fatigue life and was continuously improved over the years since the 50th. The fatigue life of glass fibre reinforced plastics (GFRP) used in aircraft industry is 10 to 100 times higher compared to glass fibre non crimp fabrics used for wind turbine blades. To assure a constant and reliable high quality and strength of reinforcement fibres, synthetic fibre production is state of the art (CF, GF). There is a need for recycling GFRP and CFRP waste due to the upcoming use. Pyrolysis and solvolysis are more expensive than the mechanical route however enable a more sustainable recycling. Natural fibres and recycled synthetic fibres have a high scatter in quality and strength. Hence it is a challenge to optimize the production / recycling processes to get a reliable quality for any demanding (second life) application. Chemical routes for using renewables resources and recycling, is going to be a good approach especially for polymer-matrix systems to get 100% quality (back) compared to the state of the art. Finally, a proper design, life-time extension and repair is preferable to recycling to keep the carbon footprint as low as possible. T2 - 27. INTERNATIONALES DRESDNER LEICHTBAUSYMPOSIUM CY - Dresden, Germany DA - 13.06.2024 KW - Polymer Matrix Composites KW - Carbon Fibre KW - Recycling KW - Circular Economy PY - 2024 UR - https://leichtbausymposium.de/deu/ AN - OPUS4-60683 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bonse, Jörn A1 - Schwibbert, Karin T1 - Laserstrukturierte Oberflächen: Ein Weg zur Kontrolle der Biofilmbildung? N2 - Bakterielle Biofilme stellen in medizinischen und industriellen Bereichen ein ernsthaftes Problem dar. Eine der größten gesellschaftlichen Herausforderungen liegt in der zunehmenden Resistenz von Bakterien gegen Biozide, die bei antimikrobiellen Behandlungen eingesetzt werden, z.B. durch übermäßigen Einsatz in Medizin, Industrie und Landwirtschaft oder durch Reinigung und Desinfektion in Privathaushalten. Daher sind neue effiziente bakterienabweisende Strategien, die den Einsatz von Bioziden vermeiden, dringend erforderlich. Ein vielversprechender Weg zur Erzielung bakterienabweisender Oberflächen liegt in der berührungslosen und aseptischen großflächigen Laserbearbeitung von technischen Oberflächen. Maßgeschneiderte Oberflächentexturen, ermöglicht durch verschiedene Laserbearbeitungsstrategien, die zu topographischen Skalen im Bereich von Nanometern bis Mikrometern führen, können eine Lösung für diese Herausforderung darstellen. In dem Vortrag wird ein Überblick über den aktuellen Stand der Technik bei der subtraktiven Texturierung von Laseroberflächen zur Kontrolle der Biofilmbildung bei verschiedenen Bakterienstämmen und in unterschiedlichen Umgebungen gegeben. Auf der Grundlage spezifischer Eigenschaften von Bakterien und laserbearbeiteten Oberflächen werden die Herausforderungen antimikrobieller Oberflächendesigns erörtert und zukünftige Richtungen aufgezeigt. T2 - GRAVOSeminar, GRAVOmer Kompetenznetzwerk CY - Online meeting DA - 28.02.2024 KW - Laser-Materialbearbeitung KW - Ultrakurzpuls-Laser KW - Biofilme KW - Antibakterielle Oberflächen KW - Oberflächenfunktionalisierung PY - 2024 UR - https://gravomer.de/veranstaltungen-anzeigen/laserstrukturierte-oberflaechen-ein-weg-zur-kontrolle-der-biofilmbildung AN - OPUS4-59594 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogel, Christian T1 - Current status of monitoring of PFAS release from industrial facilities N2 - Increasing studies report per- and polyfluoroalkyl substances (PFAS) in the ambient air and emissions from diverse industrial sources. Therefore, a comprehensive framework for characterizing PFAS emissions by identifying source-specific chemical fingerprints, evaluating emission pathways and assessing the impact of remediation technologies is needed. Depending on the type of PFAS, dedicated sampling and analytical procedures are required. Here, also the detection of possible PFAS transformation products, so-called products of incomplete combustion (PICs) are more mobile or toxic, is also of great interest to evaluate these technologies in terms of mineralisation potential and fluorine mass balance. T2 - PFAS study and technical exchange tour of MEE-FECO in Germany CY - Online meeting DA - 12.09.2025 KW - Per- and polyfluoroalkyl substances (PFAS) KW - Incineration PY - 2025 AN - OPUS4-64081 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seifert, Lando T1 - A New Young Network - die junge gfkorr (Das Netzwerk für junge Korrosionisten) N2 - This invited talk at the Young EFC Meeting (European Federation of Corrosion) was about the new network, founded in Germany in 2023, specialising in corrosion and corrosion protection. The network is called "die junge gfkorr" and has the following aims: (i) Initiation of in-person events with excursions and a networking atmosphere. (ii) Members come from both industry and academia can find similarities in each other's work (iii) Get to know each other and learn from each other, and (iv) Members benefit long-term by using the network throughout their careers and for future collaboration on daily business and research projects. T2 - Conference EUROCORR 2025, Young EFC Meeting CY - Stavanger, Norway DA - 07.09.2025 KW - Coatings KW - Corrosion KW - Corrosion Protection KW - Network PY - 2025 AN - OPUS4-64102 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Claudia T1 - Quality X: Data Spaces for laboratories. How about a proof of concept? N2 - Überblick über die Initiative QI-Digital. Schwerpunkt liegt neben den allgemeinen Zielen und Aktivitäten in verschiedenen Projekten insbesondere auf der Rolle von Datenräumen für die Qualitätsinfrastruktur (QI) und hier insbesondere Labore. Datenräume als Anker einer digitalen QI ermöglichen nicht nur sicheren und souveränen Datenaustausch sondern bieten auch Potential für neue Geschäftsmodelle. T2 - VUP Jahrestagung CY - Saarbrücken, Germany DA - 11.06.2024 KW - Qualitätsinfrastruktur KW - Qualitätssicherung KW - Data Spaces KW - Digitale Transformation KW - Datenräume KW - Digitales Zertifikat KW - DPP PY - 2024 AN - OPUS4-60346 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Claudia T1 - Eine moderne Qualitätsinfrastruktur: digital und vernetzt N2 - Überblick über die digitale Transformation der Qualitätsinfrastruktur (QI), die Initiative QI-Digital sowie die Aktivitäten der BAM. T2 - 11. Sitzung DGZfP UA Schnittstellen, Dokumentation, Datensouveränität Speicherung, Archivierung CY - Saarbrücken, Germany DA - 11.4.2024 KW - Qualitätsinfrastruktur KW - Qualitätssicherung KW - Zerstörungsfreie Prüfung KW - digitale Transformation KW - Smart Standard KW - Digitales Zertifikat KW - Quality-X PY - 2024 AN - OPUS4-60347 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf A1 - Konthur, Zoltán T1 - Bestimmung von anthropogenen Markerkonzentrationen im Abwasser mittels eines antikörperbasierten Verfahrens (ELISA) N2 - Im Rahmen des AMELAG Projektes wurden im Auftrag des Umweltbundesamtes (VH1804) unterschiedliche anthropogene Marker in Abwasserproben aus Brandenburg und Mecklenburg-Vorpommern gemessen. In dieser Präsentation wurden einige Ergebnisse vorgestellt. T2 - AMELAG Abschlussveranstaltung am Robort-Koch-Institut CY - Berlin, Germany DA - 13.12.2024 KW - Östron KW - Koffein KW - Carbamazepin KW - Clarithromycin PY - 2024 AN - OPUS4-62194 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hahn, Oliver T1 - Materialanalysen an Bibliotheksgut. Möglichkeiten und Grenzen N2 - Eine neue Panik macht sich in Deutschland breit: sind alle Bücher, die einen grünen Farbschnitt oder Umschlag haben und damit giftiges Arsen enthalten, eine Gefahr für Mensch und Umwelt? Der Vortrag blickt aus archäometrischer Perspektive auf das Phänomen und stellt klar, dass seit der Antike gesundheitsschädliche Pigmente Verwendung fanden und dass seit dem späten Mittelalter schriftliche Belege für den sorgfältigen Umgang mit solchen Gefahrstoffen existieren. Die Farbe "grün" ist keineswegs die einzige Farbe, die "Gifte" enthalten kann. Zudem lässt sich die Palette der "gefährlichen" Elemente mit Blei, Quecksilber, Cadmium oder Chrom deutlich erweitern. T2 - Arsen in Büchern: Auf dem Weg zu angemessenen Arbeitsschutzmaßnahmen CY - Wolfenbüttel, Germany DA - 10.10.2024 KW - Archäometrie KW - Gift KW - Arbeitsschutz PY - 2024 AN - OPUS4-61407 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Paul, Andrea T1 - Remelting Miwo - Methoden für die Vor-Ort Analytik N2 - In Deutschland werden jährlich rund 20 Millionen Tonnen künstliche Mineralwolle für die Dämmung von Dächern und Fassaden sowie für Brandschutzprodukte verwendet. Um künstliche Mineralwolle aus Rückbaumaßnahmen in den Produktionsprozess zurückführen zu können, ist eine Trennung in Glas- und Steinwolle erforderlich, um eine Vermischung der beiden Produkte, die unterschiedliche Schmelztemperaturen aufweisen, zu vermeiden. Anstatt die Mineralwolle in spezielle Labors zu schicken, was zeitaufwendig und teuer ist, wurde das Potenzial eines tragbaren Nahinfrarot-Spektrometers (NIR) für den Einsatz vor Ort getestet. 140 verschiedene Mineralwolleproben wurden untersucht, um eine NIR-basierte Methode für die Vor-Ort-Unterscheidung zwischen Glas- und Steinwolle zu etablieren. Die Validierung der Methode mit Testproben und die Anwendung auf Materialien, die aus BigBags für Deponien entnommen wurden, haben gezeigt, dass die Methode präzise und robust ist. Als Referenzmethode wurde die Röntgenfluoreszenzspektroskopie (RFA) mit einer Kalibrierung auf der Grundlage der VDI 3492 verwendet. T2 - 23. Projektetage der Bauforschung CY - Online meeting DA - 14.03.2023 KW - NIR KW - RFA KW - Mineralwolle PY - 2023 AN - OPUS4-57372 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. T1 - Sensorik und KI in robotischen Anwendungen N2 - In den letzten Jahrzehnten hat die Robotik, insbesondere im Bereich der Umweltüberwachung, bedeutende Fortschritte gemacht. Roboter verschiedenster Formen und Größen sind zu essenziellen Werkzeugen für die Datenerhebung in der Umweltforschung geworden. Forscher*innen stehen dabei vor großen Herausforderungen bei der Gestaltung und Implementierung solcher Systeme, vor allem im Bereich der Mobilen Roboterolfaktion (MRO). MRO umfasst mobile Roboter, die unter anderem mit Gassensoren ausgestattet sind, und verlangt die Integration verschiedener Disziplinen wie Signalverarbeitung, maschinelle Wahrnehmung, autonome Navigation und Mustererkennung. Typische Anwendungen der MRO beinhalten das Mapping von Gasverteilungen, die Lokalisierung und Detektion von Gasquellen sowie das Tracking von Gaswolken. Die Aerial Robot Olfaction (ARO) ist eine spezialisierte Form der MRO, die diese Konzepte auf Luftroboter überträgt, um die Herausforderungen der luftgestützten Gasmessung anzugehen. Dieser Vortrag konzentriert sich auf aktuelle Entwicklungen im Bereich ARO, insbesondere im Hinblick auf reale Einsatzbedingungen und Herausforderungen. T2 - Spotlights der Mikro- und Nanotechnologie - Teil 21: Sensorik und KI in robotischen Anwendungen CY - Online meeting DA - 01.10.2024 KW - Aerial robot KW - Learning Based Gas Distribution Mapping KW - Mobile robotic olfaction KW - Aerial-based Gas Tomography PY - 2024 AN - OPUS4-61210 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Circular Economy - Einführung in die Umsetzung N2 - Der Vortrag fasst die internationalen, europäischen und nationalen Entwicklungen zur Transformation der linearen hin zu einer zirkulären Wirtschaft zusammen. Auf den drei Ebenen folgt der Vortrag jeweils der selben Logik: (i) Bedarfe, (ii) Strategien und Pläne sowie (iii) konkrete Maßnahmen. Ebenfalls werden Hinweise zu weiteren Informationsquellen gegeben. T2 - Seminarreihe FH Potsdam CY - Potsdam, Germany DA - 17.06.2025 KW - Circular economy KW - Kreislaufwirtschaft KW - Rechtssetzung KW - Normung PY - 2025 AN - OPUS4-63445 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schoknecht, Ute A1 - Kalbe, Ute A1 - Happel, O. T1 - Combination of leaching tests with ecotoxicity and chemical analysis – Lessons learnt N2 - The presentation describes analytical methods to characterize eluates from leaching tests and identify organic substances in leachates. Chances to obtain complementary information from ecotoxtests and chemical analysis are discussed. T2 - Workshop: Ecotoxicological evaluation of construction products – test results, implementation in Guidance, Technical Standards and Ecolabelling CY - Online meeting DA - 21.03.2022 KW - Leaching KW - Ecotoxicity KW - Construction products PY - 2022 AN - OPUS4-55276 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiesner, Yosri T1 - Sample preparation methods of food and environmental matrices for microplastics analysis using TED-GC-MS N2 - Microplastic determination in food and surface waters will be increasingly carried out in the course of future directives and regulations, such as EU drinking water directive and wastewater directive. In addition to unique identification, this also includes reliable quantification. Two different methodological approaches are used for the quantification. With vibrational spectroscopic techniques such as µ-FTIR and µ-Raman, results are obtained in the form of particle number, size and shape. Instead, with thermal analytical technics as TED-GC/MS and Py-GC-MS the results are expressed as mass concentration.. Both concepts offer different information variables. In terms of routine monitoring, it is necessary to obtain a rapid sequence from sampling to the detection result. For this reason, this study focuses on TED-GC/MS and Py-GC-MS. Even though thermal analytical methods generally require less sample preparation, some matrices require it. This is usually done if the analyte concentration is too low or if strong matrix effects such as signal suppression and false positive signals occur. This talk presents advanced sample preparation for baby milk powder as food example and density separation for microplastic analysis in surface waters. A preparation protocol based on citric acid was selected for the milk to remove as much as possible of the matrix. The low pH value leads to a fast and effective protein precipitation and minimizes filter cake formation, making filtration possible, reduces the number and the amount of compounds in detection and hence, simplifies the evaluation. Microplastics in surface waters and sediments must be concentrated not only because of their low microplastics mass content but also in terms of homogeneity. For this purpose, a density separation was carried out using a concentrated sodium iodide solution, which led to a high reduction of the inorganic mineral matrix and made possible to obtain a representative subsample of initial masses of up to 80 g. T2 - 22nd European Symposium on Polymer Spectroscopy (ESOPS 24) CY - Berlin, Germany DA - 08.09.2024 KW - Microplastics KW - Harmonization KW - Preparation method microplastics KW - Detection method microplastics PY - 2024 AN - OPUS4-61015 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute T1 - Utilization of recycling materials in Germany - Regulations, assessment framework and leaching tools N2 - Der Vortrag wurde im Rahmen des 9th Geoenvironmental Assessment Seminars gehalten der auf Leaching- und Adsorptionstests fokussiert war. Der Vortrag enthielt einen Überblick über die Standardisierung von Leachingverfahren in DIN, CEN und ISO. Die Vorgehensweise der Bewertung des Schadstofftransfers bei der Wiederverwertung von Bodenmaterialien und der Verwertung mineralischer Ersatzbaustoffe in Deutschland wurde hinsichtlich der neuen rechtlichen Rahmenbedingungen dargestellt. Spezielle Herausforderungen bei der Untersuchung von PFAS mit Elutionsverfahren wurden aufgezeigt. T2 - 9th Geoenvironmental Assessment Seminar AIST (National Institute of Advanced Industrial Science and Technology) CY - Tsukuba, Japan DA - 25.03.2024 KW - Recycling of mineral waste KW - Contaminant transfer KW - Leaching KW - Assessment KW - Legislation KW - PFAS PY - 2024 AN - OPUS4-62057 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nordholt, Niclas T1 - The interplay between biocides, phenotypic heterogeneity and resistance evolution N2 - An overview of the interplay between biocides, phenotypic heterogeneity and resistance evolution presented at the University Wroclaw. T2 - Invited seminar at the Department of Molecular Microbiology CY - Wroclaw, Poland DA - 08.04.2024 KW - Disinfectants KW - Biocide resistance KW - Phenotypic heterogeneity KW - Evolution PY - 2024 AN - OPUS4-61173 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf T1 - Monitoring trace substances in wastewater and surface water by immunoanalytical assays and sensors N2 - Monitoring the elimination of trace substances in wastewater treatment plants, as required in the recast of the EU Urban Wastewater Treatment Directive and the new Kommunalabwasserrichtlinie (KARL), creates a need for on-site analyses in wastewater treatment plants. Immunoanalytical methods can be carried out on site, e.g. in the form of rapid tests, but continuously operating (immuno-bio)sensors would be ideal. And antibody-based methods have the inherent disadvantage that one antibody must be used per analyte and therefore only a small number of substances can be analysed. A set of indicators has been integrated in the directives in accordance with the list of the Kompetenzzentrum Spurenstoffe BW (KomS) and offer points of reference here. Yet, in order to be able to use immunoanalytical methods for their monitoring, (DIN/ISO) standards are required that define the necessary quality requirements and quality management measures for the sensors. In addition, for the larger part of the indicators, the required antibodies have yet to be developed and made commercially available in the long term. The talk will highlight our previous work on high-throughput methods, such as ELISA, regarding the presence of anthropogenic markers and some indicators as well as research approaches for sensor technology that could be used on-site, and will provide an overview of deficits and future efforts. T2 - Kolloquium der Abteilung Technische Umweltchemie und Sensortechnik CY - Stuttgart, Germany DA - 21.05.2025 KW - Antibodies KW - Immunoassay KW - Microfluidics KW - Biosensor KW - Trace substances PY - 2025 AN - OPUS4-63501 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf T1 - Bestimmung von Spurenstoffen im (Roh-)Abwasser mittels ELISA N2 - Der Vortrag behandelt die Bestimmung von Spurenstoffen im Rohabwasser mithilfe von ELISA (Enzyme-Linked Immunosorbent Assay), einer immunanalytischen Methode, die sich durch hohe Sensitivität und Eignung für Hochdurchsatzanalysen auszeichnet. Im Rahmen der Projekte MARKERIA I & II wurden verschiedene anthropogene Marker wie Koffein, Carbamazepin, Diclofenac, Bisphenol A und Hormone wie Östron untersucht, um deren Eignung für die Abwassersurveillance zu bewerten. Die Ergebnisse zeigen, dass einige Substanzen wie Carbamazepin stabile Konzentrationen aufweisen und sich gut als Marker eignen, während andere wie Koffein starke Schwankungen zeigen. Einige Marker wie Isolithocholsäure werden zwar in hohen Konzentrationen gefunden, zeigen aber methodische Herausforderungen wie instabile Assays. Die Studie hebt hervor, dass es Hotspots mit erhöhten Konzentrationen gibt, aber insgesamt eine relativ geringe Variabilität zwischen verschiedenen Rohabwässern besteht. Zukünftige Entwicklungen sollen sich auf die Verbesserung von Antikörpern, die Entwicklung tragbarer Vor-Ort-Analysemethoden und die Standardisierung immunanalytischer Verfahren konzentrieren. T2 - AMELAG-Colloquium "Spurenstoffe im (Ab-)Wasser" CY - Online meeting DA - 20.06.2025 KW - Antikörper KW - Schnelltests KW - Abwasser KW - ELISA PY - 2025 AN - OPUS4-63500 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nordholt, Niclas T1 - EVOCIDE: Preserving disinfectant efficacy by predicting evolution: exposing the principles of disinfectant survival and adaptation in bacteria N2 - Presentation of the EVOCIDE research proposal work programme.EVOCIDE seeks to gain a systems level understanding of disinfectant survival and evolution in bacteria. T2 - Joint Group Seminar Rolff-McMahon-Armitage-Steiner CY - Berlin, Germany DA - 20.12.2023 KW - Disinfectants KW - Evolution KW - Microbiology KW - Bacteria KW - Biocides PY - 2023 AN - OPUS4-59224 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogel, Christian T1 - Investigating the Thermal Decomposition of PFAS in a Full-Scale Commercial Hazardous Waste Incinerator N2 - Incineration is currently the only commercial full-scale technology available to destroy per- and polyfluoroalkyl substances (PFAS) in large solid and liquid waste streams. Given previous experience of dioxin formation during halogenated waste incineration, concerns about the emission of products of incomplete destruction (PIDs) from PFAS incineration exist. The overarching objective of this project is to track the fate of fluorine during full-scale hazardous waste incineration in order to demonstrate the readiness, viability, and level of safety for thermal PFAS destruction in various waste streams. The specific objectives of this project are (1) to enhance our understanding of key variables and conditions on PFAS incineration performance, (2) to identify major PIDs under insufficient treatment conditions, (3) to explore the catalytic role of fly ash and other process-relevant surfaces in thermal PFAS decomposition, and (4) to determine the potential formation of polyfluorinated dibenzodioxins and dibenzofurans. T2 - CEN/TC 264/WG48 Symposium - Emissions and ambient air - Determination of PFAS CY - Düsseldorf, Germany DA - 16.07.2025 KW - Per- and polyfluoroalkyl substances (PFAS) KW - Incineration PY - 2025 AN - OPUS4-63714 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rurack, Knut T1 - Empowering test strips for rapid, highly sensitive and multiplexed analysis of small molecule analytes at a point-of-need N2 - In particular, the rapid development of lateral flow assays as indispensable tools for everyone to contain the SARS-CoV-2 pandemic has fuelled the global demand for analytical tests that can be used outside dedicated laboratories. In addition to their use in medical diagnostics, rapid tests and assays have become increasingly important in various fields such as food safety, security, forensics, and environmental management. The advantage is obvious: taking the assay directly to the sample minimizes the time between suspicion and decision-making, allowing faster action. Especially today, when mobile communication devices with powerful computing capabilities and built-in cameras are ubiquitous, more people than ever before around the world have the basic skills to operate a powerful detector at their fingertips. This sets the stage for a much wider use of analytical measurements in terms of prognosis and prevention, enabling professional laypersons in particular. However, current strip-based systems are primarily focused on single parameter analysis, whether it is SARS-CoV-2 biomarkers, blood glucose levels, or lead concentrations in water samples. Industrial applications of such methods also often still rely on single-parameter assays, requiring multiple runs even for a limited number of key parameters. Overcoming these limitations depends on developing low-number multiplexing strategies that ensure robustness, reliability, speed, ease of use, and sensitivity. This lecture will give an overview of several generic approaches developed in recent years to address these challenges. It will highlight how the synergy of supramolecular (bio)chemistry, luminescence detection, hybrid (nano)materials and device miniaturization can result in powerful (bio)analytical assays that can be used at a point-of-need.1-5 Selected examples will introduce key aspects of such systems that include tailored signaling mechanisms and recognition elements, materials functionalization and device integration, including hybrid nanomaterials, gated indicator release systems, strip modification, and smartphone-based analysis. T2 - 15th Rapid Methods Europe Conference CY - Amsterdam, Netherlands DA - 06.11.2023 KW - Test strips KW - Lateral flow assays KW - Explosives KW - Pesticides KW - Rapid testing KW - Multiplexing PY - 2023 AN - OPUS4-58816 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rurack, Knut T1 - Chips or strips – the importance of embedding and integration in (bio)chemical assay development N2 - The most important aspect of developing a miniaturized or compact (bio)chemical assay for use outside a dedicated laboratory environment is, of course, the design of the recognition and signaling element that best achieves the required selectivity and sensitivity in relation to the target analyte and analytical scenario. For luminescence assays, this essentially means that the appropriate combination of small-molecule binding units, ligands or biomacromolecular binders such as antibodies or aptamers and organic, metal-organic or rare earth metal ion luminophores or luminescent nanoparticles such as semiconductor nanocrystals, carbon nanodots, polymer dots or fluorescently doped silica or polymer nanoparticles as well as the best strategy for combining binding and signaling unit must be selected. Having accomplished this task and obtained first promising results in a conventional laboratory setting with the use of pipettes, cuvettes and benchtop spectrometers, the challenge is to bridge the gap between such a model assay and an assay that uses a mobile and robust device in the hands of a layperson and does not require complicated operation and extensive manual steps, especially when handling liquids, at best in line with the ASSURED principle, being affordable, sensitive, specific, user-friendly, rapid and robust, equipment free and deliverable to end-users, or, as recently proposed, the REASSURED principle, which furthermore includes real-time connectivity and ease of specimen collection (translating into ease of sampling in the non-diagnostic world). In order to close this gap, it is of utmost importance to know the further requirements of the assay, i.e., whether only one or more than one analyte needs to be detected, what the main potential interferents are and how tolerant the assay is to the sample matrix, as well as how many assays are typically performed per hour/day/week, how long a run should take and how expensive a single analysis should be. These parameters usually determine the most appropriate format, i.e., whether it is a dip stick, a test strip, a lateral flow assay, a microfluidic chip, a 3D-microfluidic approach or a combination thereof, in conjunction with a dedicated readout system or a mobile communication device. This choice in turn determines the most appropriate strategy for integration, i.e., whether the recognition and signaling element are used directly in liquid solution,8 embedded in polymer layers or gels, attached to surfaces of planar substrates, micro- or nanoparticles or immobilized or loaded in micro- or nanoparticles, which could then enable direct or controlled/gated access. This contribution discusses various aspects of this multi-stage process using examples from the group. T2 - How to develop a sensor? Academic Approaches vs. Industrial Interests (EU Training School) CY - Kaiserslautern, Germany DA - 18.09.2024 KW - Sensing KW - Rapid testing KW - Microfluidics KW - Test strips KW - Device integration PY - 2024 AN - OPUS4-61429 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Matthias T1 - PFAS-Analytik – Ein Überblick N2 - Die Gruppe der PFAS (Per- und polyfluorierte Alkylsubstanzen) mit mehr als 10.000 Substanzen stellt ein zunehmendes Problem bei der Bewertung und Entsorgung belasteter Abfälle dar. Die zuverlässige PFAS-Analytik stellt hier aufgrund der Vielzahl an Einzelparametern mit zum Teil sehr großen Konzentrationsunterschieden eine komplexe Herausforderung dar. Der Vortrag gibt zunächst einen Überblick über grundlegende Anforderungen an die LC-MS/MS Analytik von PFAS-Targetsubstanzen. Am Beispiel eines von BAM und SenMVKU organisierten Ringversuches 2024 zur Bestimmung von PFAS in Bodenproben (Feststoffe und Eluate) wird auf spezifische Fragestellungen zur PFAS-Analytik eingegangen. Zur Verbesserung von Richtigkeit und Vergleichbarkeit ist die Einhaltung von Normvorgaben und die Anwendung von Qualitätssicherungsmaßnahmen unerlässlich. Hierzu gehören u.a. die Verwendung zuverlässiger Kalibrierstandards, die Kalibrierung mit definierten n-Isomeren, die Quantifizierung der Summe aus n-/br-Isomeren, der Einsatz isotopenmarkierter interner Standards für die LC-MS/MS Analyse, die Verwendung von Matrix-Referenzmaterialien sowie die Teilnahme an Ringversuchen. T2 - Schaffung von Laborkapazitäten zur Untersuchung PFAS-belasteter Abfälle CY - Potsdam, Germany DA - 11.09.2024 KW - PFAS KW - Ringversuch KW - Qualitätssicherung KW - Referenzmaterial PY - 2024 AN - OPUS4-61014 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pittner, Andreas T1 - Life cycle assessment of fusion welding processes methodology and implementation N2 - Fusion welding processes in manufacturing are resource-intensive, creating a significant opportunity to reduce their environmental impact. While the environmental effects of these processes are qualitatively understood, quantitatively assessing the key influencing parameters remains challenging. This study presents a welding-specific methodology leveraging life cycle assessment (LCA) to quantitatively measure the environmental footprint of fusion welding technologies. The proposed approach identifies and evaluates the critical parameters that influence the environmental performance of various welding methods, including conventional joint welding and additive manufacturing through the Direct Energy Deposition-Arc (DED-Arc) process. By incorporating real-time resource consumption data, the methodology provides a novel framework for directly linking process parameters to environmental impacts. This research offers a precise and quantitative analysis of the ecological effects of welding processes, supporting their optimization and promoting the development of more sustainable manufacturing practices. T2 - European welding association - executive meeting 2 CY - Milano, Italy DA - 03.12.2024 KW - Life cycle assessment KW - Fusion welding KW - Sensitivity study PY - 2024 AN - OPUS4-62018 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Stakeholder-Beteiligung und -Konsultation im Ökodesign-Rechtsrahmen N2 - Entlang des EU-Rechtssetzungsprozesses für Produktregulierungen im Ökodesign-Rechtsrahmen werden Möglichkeiten zur Beteiligung sowie die Konsultation der Europäischen Kommission von diversen Stakeholdergruppen erörtert. Darüber hinaus werden öffentliche Konsultationen und das Einbringen von Expertenwissen in Normung und Forschung skizziert. T2 - DIN-Infoveranstaltung: Ökodesign-Verordnung CY - Berlin, Germany DA - 06.10.2025 KW - Circular economy KW - Kreislaufwirtschaft KW - Rechtssetzung KW - Normung KW - Ecodesign PY - 2025 AN - OPUS4-64310 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Szymoniak, Paulina T1 - Vitrimers – new golden child of polymers? N2 - Vitrimers represent an innovative and promising class of sustainable materials poised as an alternative to conventional epoxy thermosets within the framework of the circular economy. Based on covalent adaptive networks (CANs), vitrimers exhibit dynamic bon d rearrangements upon external stimuli, endowing them with unique properties such as shape memory, self healing, and recyclability. These pioneering materials combine the robust mechanical behavior of classic lightweight thermosets with the inherent mallea bility of thermoplasts, making them highly attractive for next generation sustainable material applications. This study explores the intricate interplay between the nature of CANs and the macroscopic properties of newly developed vitrimers. The investigated material is a bio based vitrimer consisting of a glycerol triglycidyl ether (GTE) resin and a vanillin derived imine hardener (VA). This system represents an ideal biobased substitute for fossil derived epoxy resins and leverages a catalyst free imine metathesis mechanism to enable recycl ability. Despite the advantages of vitrimers, the molecular mechanisms governing their recyclability, particularly the dynamic exchange reactions, remain poorly understood. To gain deeper insights into these mechanisms, this study employs a combination of broadband dielectric spectroscopy , neutron scattering, mechanical spectroscopy, calorimetry, and dynamic thermal investigations. A systematic approach utilizing both standard and innovative characterization techniques is essential to unravel the synergistic relationship between molecular behavior, structure, and thermomechanical performance. This fundamental understanding will help propel vitrimers to the forefront of sustainable material science, advancing their practical implementation as recyclable polymer systems. T2 - Berlin-Brandenburgischer Verband für Polymerforschung Colloquium CY - Berlin, Germany DA - 28.04.2025 KW - Recycling KW - 3R PY - 2025 AN - OPUS4-64293 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meermann, Björn T1 - Species-specific isotope ratio analysis of proteins via CE/MC-ICP-MS N2 - Klassische Isotopenverhältnisanalyse (stabile IStope) läuft meistens im Rahmen einer bulk Analyse ab. Hierbei geht jedoch die Spezies-Information verloren. Ferner sind bulk Verfahren im Bereich der Probenvorbereitung aufwändig. Im Rahmen meines eingeladenen Vortrags werden neue CE/MC-ICP-MS Verfahren vorgestellt, die in meiner Gruppe entwickelt werden. T2 - 2024 Winter Conference on Plasma Spectrochemistry CY - Tucson, AZ, USA DA - 16.01.2024 KW - CE KW - MC-ICP-MS KW - Species specific isotopes PY - 2024 AN - OPUS4-62239 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Biyikal, Mustafa T1 - Development of a handheld device for the trace detection of explosives N2 - This presentation introduces a new explosives trace detector (ETD), a handheld device developed by True Detection Systems (TDS). Addressing the limitations of current handheld detectors—such as unreliable measurements and cumbersome operation— the new ETD XT-1 integrates advanced sensor technology, including a Lab-on-a-Chip, to deliver high sensitivity and accuracy. Capable of detecting trace levels of substances like TNT, TATP, and ammonium nitrate, the device offers rapid, user-friendly detection through AI/ML-enhanced algorithms. These algorithms enable precise substance identification by analyzing absorption and desorption rates, significantly reducing false positives. The XT-1 has broad applications in security, hazardous material detection, and environmental monitoring. T2 - Photonics Days Berlin Brandenburg CY - Berlin, Germany DA - 09.10.2024 KW - Explosives KW - Trace detection KW - Handheld device KW - Lab-on-a-chip KW - Fluorescence PY - 2024 AN - OPUS4-61433 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koerdt, Andrea T1 - Euro-MIC 2021-2025, our journey, and paths forward N2 - Microbiologically Influenced Corrosion (MIC) refers to the detrimental effects on materials caused by microorganisms, and it is becoming an increasingly significant issue for society. Unlike the USA, Canada, and Australia, Europe has less developed cooperation on MIC. Although several research groups and industrial stakeholders are addressing MIC, discussions remain fragmented, and information exchange is limited. A truly transdisciplinary approach is rarely seen. As a result, Europe often relies on methods, preventive measures, and standards from other regions, as there are no equivalent European standards. This situation makes Europe a) highly dependent, and b) in some cases, unable to use certain measures or standards due to European legal restrictions (e.g., the use of biocides). In 2021, researchers established the “Euro-MIC” network, financially supported by the EU project “COST-Action,” to tackle these issues. Through COST-Action, Euro-MIC aims to facilitate necessary interactions, communication, knowledge sharing, and training for personnel and researchers across various disciplines. COST-Action supports network activities, workshops, training schools, conferences, and more. Euro-MIC aspires to position Europe as a leader in MIC, promoting ideas on par with other nations while upholding European values and ensuring greater protection for people, property, and the environment. In this presentation, I will briefly introduce the principles of COST Action and highlight the significant opportunities provided by this EU-funded project. COST Action fosters interdisciplinarity, networking, training, scientific exchange, and the promotion of young scientists. By showcasing some examples of CA20130 COST ACTION Euro-MIC, I hope to demonstrate that COST Action is not only relevant for addressing MIC but can also be applied to other important topics and sectors. T2 - Unseen Corrosion: Unveiling Hidden Threats and Innovating Monitoring Solutions CY - Bergen, Norway DA - 15.05.2025 KW - COST Action CA20130 KW - MIC KW - Network KW - Corrosion KW - Microorganisms PY - 2025 UR - https://www.norceresearch.no/en/events/unseen-corrosion AN - OPUS4-63726 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Entwicklungen zur Circular Economy in Rechssetzung und Normung N2 - Zusammenfassung der Implementierung von Circular Economy Prinzipien in der Rechtssetzung und Normung. Schwerpunkte sind das EU-Produktrecht, Bewertungsmethoden zur Zirkularität von Produkten und angekündigte EU-Rechtsrahmen und ihre Ausgestaltung. T2 - Industrieforum Global Environmental Compliance CY - Online meeting DA - 06.11.2025 KW - Circular economy KW - Rechtssetzung KW - Normung KW - Politikberatung KW - Ecodesign PY - 2025 AN - OPUS4-64601 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koerdt, Andrea T1 - Mikrobielle Einflüsse auf Wasserstoffspeicherung: Materialien, Abbauprozesse und Teststrategien N2 - Wasserstoff gilt als Schlüsseltechnologie für die Energiewende – doch seine sichere Anwendung stellt neue Anforderungen an Technik, Infrastruktur und Personal. Die Veranstaltung „H₂ Sicherheit“ bietet eine umfassende Plattform, um sich über die sicherheitsrelevanten Aspekte von Wasserstoff zu informieren und praxisnahe Lösungen kennenzulernen. Expert:innen aus Forschung, Industrie und Netzbetrieb geben Einblicke in aktuelle Entwicklungen, Herausforderungen und Best Practices. Fokus dieser Präsentation war der Mikrobielle Einfluss bei der unterirdischen Speicherung von Wasserstoff und das neuartige Testsystem (MISTRAL) T2 - DVGW- H₂ Sicherheit | 26. – 27. November 2025 CY - Online meeting DA - 26.11.2025 KW - MIC KW - MISTRAL KW - Hochdruckbehälter KW - Wasserstoff KW - Unterirdische geologische Formationen PY - 2025 AN - OPUS4-64890 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schumacher, Julia T1 - Knufia petricola – a model for exploring the biology of black rock-inhabiting fungi N2 - Black fungi also called black yeasts, rock-inhabiting fungi or microcolonial fungi are a group of Ascomycetes [Eurotiomycetes, Arthoniomycetes and Dothideomycetes] that exhibit high stress tolerance, yeast‑like or meristematic growth, and constitutive 1,8-dihydroxynaphthalene (DHN) melanin formation. They dominate a range of hostile natural and man‑made environments – from desert rocks and salterns to dishwashers, roofs, and solar panels. Due to their slow growth and the lack of sexual cycles and genetic tools, the underlying mechanisms of black fungi’s phenotypic traits have remained largely unexplored. We consider the rock inhabitant K. petricola [Eurotiomycetes, Chaetothyriales] a suitable model for studying the phenotypic characteristics of black fungi. With K. petricola the regulation of pigment synthesis, general stress responses and the unusual modes of cell division can be dissected by advanced reverse and forward genetics approaches. The genome of K. petricola strain A95 was sequenced using a combination of short high quality Illumina reads and long PacBio reads. The final assembly consists of twelve contigs: five complete chromosomes and six contigs with one telomer each. Gene annotation supported by transcriptomics and proteomics data was manually curated. Recently, we developed a set of genetic tools to manipulate the genome for analyzing gene functions and studying the cell biology. This set includes CRISPR/Cas9-based genome editing and live-cell imaging using genetically encoded fluorescent proteins, as well as protocols for -omics approaches and for simulation of mineral weathering in the laboratory. Mutants defective in DHN melanogenesis, carotenogenesis or both processes are currently studied to elucidate the role of these protective pigments in tolerance of natural and man-made stresses, weathering of olivine, penetration of marble, and adhesion to surfaces. Further, the established protocols and knowledge gained from K. petricola form a starting point for making other extremotolerant black fungi accessible to genetic manipulation. T2 - 31st Fungal Genetics Conference CY - USA, CA, Pacific Grove DA - 15.03.2022 KW - Black fungi KW - Melanin KW - Genome editing PY - 2022 AN - OPUS4-54585 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Biocide Resistance - Road to Risk Assessment N2 - This presentation details the current status of biocide resistance risk assessment and provides a roadmap for future activities. T2 - OECD, 6th Meeting of the Working Party on Biocides CY - Paris, France DA - 28.09.2022 KW - Antimicrobial resistance KW - Antimicrobial coating KW - Standardization KW - Biocides KW - Risk assessment PY - 2022 AN - OPUS4-56263 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Die Entstehung von antimikrobiellen Resistenzen durch die Verwendung von Bioziden N2 - Dieser Vortrag gibt einen Überblick über die BAM und die Aktivitäten im Bereich Biozidresistenz. T2 - Berliner Hochschule für Technik Studiengang Biotechnologie CY - Berlin, Germany DA - 05.05.2023 KW - Antimikrobielle Resistenz KW - Antmikrobielle Oberflächen KW - Standardisierung PY - 2023 AN - OPUS4-57859 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herzel, Hannes T1 - Klärschlammasche Monitoring 2022/23 - Erste Ergebnisse: P Löslichkeiten & Schwermetalle N2 - Im Rahmen des BMBF Projektes R-Rhenania wurden von fast allen Monoverbrennungsanlagen in Deutschland Klärschlammasche-Probeneingesammelt. Diese Aschen wurden auf die Gesamtchemie-Zusammensetzung, Schwermetalle und die Löslichkeit des Phosphates untersucht. T2 - 95. Sitzung des DWA Fachausschusses KEK 3 CY - Hannover, Germany DA - 27.11.2023 KW - Phosphor KW - Monoverbrennungsanlage KW - Neutralammoniumcitrat KW - Zitronensäure PY - 2023 AN - OPUS4-59437 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gorbushina, Anna T1 - Black fungi on technosphere surfaces: new niches for roof-inhabiting cousins N2 - Human-made systems, also called “build environment” or “technosphere”, sustain human comfort as well as our industrial activities. These systems have become particularly widespread since the Industrial Revolution, i.e., since the 17th century. At the same time, these technical systems – buildings, monuments, energy production, transformation and transmission, water purification and supply systems - serve as new habitats for living organisms. Life is ubiquitously present on our planet since a very long time: the Earth is 4.54 billion years old and microbial communities have played a key role on our planet for 3.7 billion years. Once human-made system appeared, microorganisms became an integral part of all types of technosphere infrastructure as well. Here we will illustrate biosphere-technosphere interactions using a specific example of the black fungi and their impact on the efficiency of solar (photovoltaic) panels. This expanding renewable infrastructure for electricity generation is growing on all continents - and create a specific, arid habitat for stress-tolerant black fungi. Black fungi were once discovered in hot and cold natural deserts – and now belong to the persistent colonisers of human-made deserts of solar parks. This new niche is evolving an impressive biodiversity. So far more than 60 isolates of black fungi belonging to Arthoniomycetes, Eurotiomycetes and Dothideomycetes were obtained from solar panels in Europe and Americas. Here we will present the analysis of this emerging anthropogenic biodiversity. Opportunities for future research in the field include quantification of the microbial load on technosphere surfaces – along with characterisation of the corresponding microbial diversity. The strategy of precise measurement and characterisation will enable us to reliably determine the beneficial and harmful functions that living microorganisms play in the functioning of energy-generating systems – and technosphere in general. T2 - IUBMB Focused Meeting on Extremophilic Fungi (FUN-EX) CY - Ljubljana, Slovenia DA - 19.09.2923 KW - Biosphere-technosphere interaction KW - Microbial communities KW - Solar parks PY - 2023 AN - OPUS4-58451 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herzel, Hannes T1 - Success-Story CaNaPO4: Erfolgreiche REACH Registrierung und Inbetriebnahme großtechnischer Anlagen N2 - Aufgrund der Vorgaben in der novellierten Klärschlammverordnung 2017 (AbfKlärV) wird für die meisten Kläranlagen ab 2029 verpflichtend das enthaltene Phosphat zurückzugewinnen bzw. einer Phosphatrückgewinnung zuzuführen. Aktuell gehen dafür einige thermochemische als auch nasschemische Verfahren in Betrieb. Die meisten thermochemischen Verfahren arbeiten mit einer vergleichbaren Grundidee. Es werden Alkali-Additive wie Na2CO3 vor der thermischen Behandlung eingemischt. Die anschließend produzierten thermochemischen Rezyklate enthalten als Phosphatphasen Calciumalkaliphosphate wie CaNaPO4, welche zu hoher Phosphatlöslichkeit und Pflanzenverfügbarkeit in den Rezyklaten führen. Aktuell werden solche thermochemischen Verfahren an den Standorten Altenstadt (Oberbayern), Michelstadt (Odenwald) und Breisach-Grezhausen (nähe Freiburg) in Betrieb genommen. T2 - Berliner Klärschlamm Konferenz CY - Berlin, Germany DA - 11.11.2025 KW - Phosphor KW - Recycling KW - Großtechnik KW - Dünger PY - 2025 AN - OPUS4-64710 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herzel, Hannes A1 - Adam, Christian T1 - P-Rückgewinnung aus Klärschlammasche - AshDec® Verfahren N2 - Klärschlammaschen können eine hohe Phosphatkonzentration aufweisen und stellen damit einen geeigneten Sekundärrohstoff für die Produktion von Phosphatdüngemitteln dar. Bisher wird dieses Potential der Klärschlammaschen für die Phosphor-Rückgewinnung jedoch kaum genutzt, da die in den Aschen enthaltenen Phosphate für Pflanzen kaum verfügbar und die Aschen teilweise mit toxischen Schwermetallen belastet sind. Im AshDec®-Verfahren wird die Klärschlammaschen im Drehrohrofen im Temperaturbereich 800-1000°C unter Zugabe von Alkali-Additiven (bsp. Na2CO3) thermochemisch behandelt, um ein wirksames und schadstoffarmes Phosphatdüngemittel herzustellen. Aktuell bereitet die Firma Emter GmbH den Bau der ersten großtechnischen AshDec®-Anlage mit einer Kapazität von 30.000 Jahrestonnen Klärschlammasche am Standort ihrer Klärschlammverbrennungsanlage (Altenstadt / Oberbayern) vor. Die erste Ausbaustufe dieser Anlage wird durch das BMBF-Projekt R-Rhenania im Rahmen der Förderinitiative RePhoR begleitet. T2 - 2. Thüringer Klärschlammkommunalkonferenz CY - Thüringer Ministerium für Umwelt, Energie und Naturschutz DA - 21.06.2022 KW - Rückgewinnung KW - Phosphor KW - Klärschlamm KW - Dünger PY - 2022 AN - OPUS4-55088 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herzel, Hannes T1 - Thermochemisches P Recycling aus Klärschlamm - Erste großtechnische Anlage am Standort Altenstadt (Bayern) N2 - Im Verbundprojekt R-Rhenania wird eine industrielle Demonstrationsanlage am Standort der Monoverbrennungsanlage Altenstadt der Firma Emter errichtet und im Jahr 2024 den Betrieb aufnehmen. Die vorhandene Rostfeuerung-Monoverbrennung wird so umgebaut, dass ein neues thermochemisches Verfahren integriert werden kann, welches hochwirksame und schadstoffarme Dünger produziert (bis zu 17.000 t/a). Die thermochemischen Produkte werden in Gefäß- und Feldversuchen im ökologischen Landbau auf ihre Düngewirkung getestet. Die Umweltverträglichkeit der Demonstrationsanlage wird untersucht, wie auch die Übertragbarkeit des Verfahrens auf weitere Regionen. T2 - 13. VDI Klärschlammbehandlung CY - Koblenz, Germany DA - 14.09.2022 KW - Phosphor KW - Versuchskampagne KW - Recycling KW - Nährstoffe KW - Dünger PY - 2022 AN - OPUS4-59576 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -