TY - CONF A1 - Wiesner, Yosri T1 - Sample preparation methods of food and environmental matrices for microplastics analysis using TED-GC-MS N2 - Microplastic determination in food and surface waters will be increasingly carried out in the course of future directives and regulations, such as EU drinking water directive and wastewater directive. In addition to unique identification, this also includes reliable quantification. Two different methodological approaches are used for the quantification. With vibrational spectroscopic techniques such as µ-FTIR and µ-Raman, results are obtained in the form of particle number, size and shape. Instead, with thermal analytical technics as TED-GC/MS and Py-GC-MS the results are expressed as mass concentration.. Both concepts offer different information variables. In terms of routine monitoring, it is necessary to obtain a rapid sequence from sampling to the detection result. For this reason, this study focuses on TED-GC/MS and Py-GC-MS. Even though thermal analytical methods generally require less sample preparation, some matrices require it. This is usually done if the analyte concentration is too low or if strong matrix effects such as signal suppression and false positive signals occur. This talk presents advanced sample preparation for baby milk powder as food example and density separation for microplastic analysis in surface waters. A preparation protocol based on citric acid was selected for the milk to remove as much as possible of the matrix. The low pH value leads to a fast and effective protein precipitation and minimizes filter cake formation, making filtration possible, reduces the number and the amount of compounds in detection and hence, simplifies the evaluation. Microplastics in surface waters and sediments must be concentrated not only because of their low microplastics mass content but also in terms of homogeneity. For this purpose, a density separation was carried out using a concentrated sodium iodide solution, which led to a high reduction of the inorganic mineral matrix and made possible to obtain a representative subsample of initial masses of up to 80 g. T2 - 22nd European Symposium on Polymer Spectroscopy (ESOPS 24) CY - Berlin, Germany DA - 08.09.2024 KW - Microplastics KW - Harmonization KW - Preparation method microplastics KW - Detection method microplastics PY - 2024 AN - OPUS4-61015 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute T1 - Utilization of recycling materials in Germany - Regulations, assessment framework and leaching tools N2 - Der Vortrag wurde im Rahmen des 9th Geoenvironmental Assessment Seminars gehalten der auf Leaching- und Adsorptionstests fokussiert war. Der Vortrag enthielt einen Überblick über die Standardisierung von Leachingverfahren in DIN, CEN und ISO. Die Vorgehensweise der Bewertung des Schadstofftransfers bei der Wiederverwertung von Bodenmaterialien und der Verwertung mineralischer Ersatzbaustoffe in Deutschland wurde hinsichtlich der neuen rechtlichen Rahmenbedingungen dargestellt. Spezielle Herausforderungen bei der Untersuchung von PFAS mit Elutionsverfahren wurden aufgezeigt. T2 - 9th Geoenvironmental Assessment Seminar AIST (National Institute of Advanced Industrial Science and Technology) CY - Tsukuba, Japan DA - 25.03.2024 KW - Recycling of mineral waste KW - Contaminant transfer KW - Leaching KW - Assessment KW - Legislation KW - PFAS PY - 2024 AN - OPUS4-62057 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nordholt, Niclas T1 - The interplay between biocides, phenotypic heterogeneity and resistance evolution N2 - An overview of the interplay between biocides, phenotypic heterogeneity and resistance evolution presented at the University Wroclaw. T2 - Invited seminar at the Department of Molecular Microbiology CY - Wroclaw, Poland DA - 08.04.2024 KW - Disinfectants KW - Biocide resistance KW - Phenotypic heterogeneity KW - Evolution PY - 2024 AN - OPUS4-61173 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf T1 - Monitoring trace substances in wastewater and surface water by immunoanalytical assays and sensors N2 - Monitoring the elimination of trace substances in wastewater treatment plants, as required in the recast of the EU Urban Wastewater Treatment Directive and the new Kommunalabwasserrichtlinie (KARL), creates a need for on-site analyses in wastewater treatment plants. Immunoanalytical methods can be carried out on site, e.g. in the form of rapid tests, but continuously operating (immuno-bio)sensors would be ideal. And antibody-based methods have the inherent disadvantage that one antibody must be used per analyte and therefore only a small number of substances can be analysed. A set of indicators has been integrated in the directives in accordance with the list of the Kompetenzzentrum Spurenstoffe BW (KomS) and offer points of reference here. Yet, in order to be able to use immunoanalytical methods for their monitoring, (DIN/ISO) standards are required that define the necessary quality requirements and quality management measures for the sensors. In addition, for the larger part of the indicators, the required antibodies have yet to be developed and made commercially available in the long term. The talk will highlight our previous work on high-throughput methods, such as ELISA, regarding the presence of anthropogenic markers and some indicators as well as research approaches for sensor technology that could be used on-site, and will provide an overview of deficits and future efforts. T2 - Kolloquium der Abteilung Technische Umweltchemie und Sensortechnik CY - Stuttgart, Germany DA - 21.05.2025 KW - Antibodies KW - Immunoassay KW - Microfluidics KW - Biosensor KW - Trace substances PY - 2025 AN - OPUS4-63501 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf T1 - Bestimmung von Spurenstoffen im (Roh-)Abwasser mittels ELISA N2 - Der Vortrag behandelt die Bestimmung von Spurenstoffen im Rohabwasser mithilfe von ELISA (Enzyme-Linked Immunosorbent Assay), einer immunanalytischen Methode, die sich durch hohe Sensitivität und Eignung für Hochdurchsatzanalysen auszeichnet. Im Rahmen der Projekte MARKERIA I & II wurden verschiedene anthropogene Marker wie Koffein, Carbamazepin, Diclofenac, Bisphenol A und Hormone wie Östron untersucht, um deren Eignung für die Abwassersurveillance zu bewerten. Die Ergebnisse zeigen, dass einige Substanzen wie Carbamazepin stabile Konzentrationen aufweisen und sich gut als Marker eignen, während andere wie Koffein starke Schwankungen zeigen. Einige Marker wie Isolithocholsäure werden zwar in hohen Konzentrationen gefunden, zeigen aber methodische Herausforderungen wie instabile Assays. Die Studie hebt hervor, dass es Hotspots mit erhöhten Konzentrationen gibt, aber insgesamt eine relativ geringe Variabilität zwischen verschiedenen Rohabwässern besteht. Zukünftige Entwicklungen sollen sich auf die Verbesserung von Antikörpern, die Entwicklung tragbarer Vor-Ort-Analysemethoden und die Standardisierung immunanalytischer Verfahren konzentrieren. T2 - AMELAG-Colloquium "Spurenstoffe im (Ab-)Wasser" CY - Online meeting DA - 20.06.2025 KW - Antikörper KW - Schnelltests KW - Abwasser KW - ELISA PY - 2025 AN - OPUS4-63500 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nordholt, Niclas T1 - EVOCIDE: Preserving disinfectant efficacy by predicting evolution: exposing the principles of disinfectant survival and adaptation in bacteria N2 - Presentation of the EVOCIDE research proposal work programme.EVOCIDE seeks to gain a systems level understanding of disinfectant survival and evolution in bacteria. T2 - Joint Group Seminar Rolff-McMahon-Armitage-Steiner CY - Berlin, Germany DA - 20.12.2023 KW - Disinfectants KW - Evolution KW - Microbiology KW - Bacteria KW - Biocides PY - 2023 AN - OPUS4-59224 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogel, Christian T1 - Investigating the Thermal Decomposition of PFAS in a Full-Scale Commercial Hazardous Waste Incinerator N2 - Incineration is currently the only commercial full-scale technology available to destroy per- and polyfluoroalkyl substances (PFAS) in large solid and liquid waste streams. Given previous experience of dioxin formation during halogenated waste incineration, concerns about the emission of products of incomplete destruction (PIDs) from PFAS incineration exist. The overarching objective of this project is to track the fate of fluorine during full-scale hazardous waste incineration in order to demonstrate the readiness, viability, and level of safety for thermal PFAS destruction in various waste streams. The specific objectives of this project are (1) to enhance our understanding of key variables and conditions on PFAS incineration performance, (2) to identify major PIDs under insufficient treatment conditions, (3) to explore the catalytic role of fly ash and other process-relevant surfaces in thermal PFAS decomposition, and (4) to determine the potential formation of polyfluorinated dibenzodioxins and dibenzofurans. T2 - CEN/TC 264/WG48 Symposium - Emissions and ambient air - Determination of PFAS CY - Düsseldorf, Germany DA - 16.07.2025 KW - Per- and polyfluoroalkyl substances (PFAS) KW - Incineration PY - 2025 AN - OPUS4-63714 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rurack, Knut T1 - Empowering test strips for rapid, highly sensitive and multiplexed analysis of small molecule analytes at a point-of-need N2 - In particular, the rapid development of lateral flow assays as indispensable tools for everyone to contain the SARS-CoV-2 pandemic has fuelled the global demand for analytical tests that can be used outside dedicated laboratories. In addition to their use in medical diagnostics, rapid tests and assays have become increasingly important in various fields such as food safety, security, forensics, and environmental management. The advantage is obvious: taking the assay directly to the sample minimizes the time between suspicion and decision-making, allowing faster action. Especially today, when mobile communication devices with powerful computing capabilities and built-in cameras are ubiquitous, more people than ever before around the world have the basic skills to operate a powerful detector at their fingertips. This sets the stage for a much wider use of analytical measurements in terms of prognosis and prevention, enabling professional laypersons in particular. However, current strip-based systems are primarily focused on single parameter analysis, whether it is SARS-CoV-2 biomarkers, blood glucose levels, or lead concentrations in water samples. Industrial applications of such methods also often still rely on single-parameter assays, requiring multiple runs even for a limited number of key parameters. Overcoming these limitations depends on developing low-number multiplexing strategies that ensure robustness, reliability, speed, ease of use, and sensitivity. This lecture will give an overview of several generic approaches developed in recent years to address these challenges. It will highlight how the synergy of supramolecular (bio)chemistry, luminescence detection, hybrid (nano)materials and device miniaturization can result in powerful (bio)analytical assays that can be used at a point-of-need.1-5 Selected examples will introduce key aspects of such systems that include tailored signaling mechanisms and recognition elements, materials functionalization and device integration, including hybrid nanomaterials, gated indicator release systems, strip modification, and smartphone-based analysis. T2 - 15th Rapid Methods Europe Conference CY - Amsterdam, Netherlands DA - 06.11.2023 KW - Test strips KW - Lateral flow assays KW - Explosives KW - Pesticides KW - Rapid testing KW - Multiplexing PY - 2023 AN - OPUS4-58816 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rurack, Knut T1 - Chips or strips – the importance of embedding and integration in (bio)chemical assay development N2 - The most important aspect of developing a miniaturized or compact (bio)chemical assay for use outside a dedicated laboratory environment is, of course, the design of the recognition and signaling element that best achieves the required selectivity and sensitivity in relation to the target analyte and analytical scenario. For luminescence assays, this essentially means that the appropriate combination of small-molecule binding units, ligands or biomacromolecular binders such as antibodies or aptamers and organic, metal-organic or rare earth metal ion luminophores or luminescent nanoparticles such as semiconductor nanocrystals, carbon nanodots, polymer dots or fluorescently doped silica or polymer nanoparticles as well as the best strategy for combining binding and signaling unit must be selected. Having accomplished this task and obtained first promising results in a conventional laboratory setting with the use of pipettes, cuvettes and benchtop spectrometers, the challenge is to bridge the gap between such a model assay and an assay that uses a mobile and robust device in the hands of a layperson and does not require complicated operation and extensive manual steps, especially when handling liquids, at best in line with the ASSURED principle, being affordable, sensitive, specific, user-friendly, rapid and robust, equipment free and deliverable to end-users, or, as recently proposed, the REASSURED principle, which furthermore includes real-time connectivity and ease of specimen collection (translating into ease of sampling in the non-diagnostic world). In order to close this gap, it is of utmost importance to know the further requirements of the assay, i.e., whether only one or more than one analyte needs to be detected, what the main potential interferents are and how tolerant the assay is to the sample matrix, as well as how many assays are typically performed per hour/day/week, how long a run should take and how expensive a single analysis should be. These parameters usually determine the most appropriate format, i.e., whether it is a dip stick, a test strip, a lateral flow assay, a microfluidic chip, a 3D-microfluidic approach or a combination thereof, in conjunction with a dedicated readout system or a mobile communication device. This choice in turn determines the most appropriate strategy for integration, i.e., whether the recognition and signaling element are used directly in liquid solution,8 embedded in polymer layers or gels, attached to surfaces of planar substrates, micro- or nanoparticles or immobilized or loaded in micro- or nanoparticles, which could then enable direct or controlled/gated access. This contribution discusses various aspects of this multi-stage process using examples from the group. T2 - How to develop a sensor? Academic Approaches vs. Industrial Interests (EU Training School) CY - Kaiserslautern, Germany DA - 18.09.2024 KW - Sensing KW - Rapid testing KW - Microfluidics KW - Test strips KW - Device integration PY - 2024 AN - OPUS4-61429 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Matthias T1 - PFAS-Analytik – Ein Überblick N2 - Die Gruppe der PFAS (Per- und polyfluorierte Alkylsubstanzen) mit mehr als 10.000 Substanzen stellt ein zunehmendes Problem bei der Bewertung und Entsorgung belasteter Abfälle dar. Die zuverlässige PFAS-Analytik stellt hier aufgrund der Vielzahl an Einzelparametern mit zum Teil sehr großen Konzentrationsunterschieden eine komplexe Herausforderung dar. Der Vortrag gibt zunächst einen Überblick über grundlegende Anforderungen an die LC-MS/MS Analytik von PFAS-Targetsubstanzen. Am Beispiel eines von BAM und SenMVKU organisierten Ringversuches 2024 zur Bestimmung von PFAS in Bodenproben (Feststoffe und Eluate) wird auf spezifische Fragestellungen zur PFAS-Analytik eingegangen. Zur Verbesserung von Richtigkeit und Vergleichbarkeit ist die Einhaltung von Normvorgaben und die Anwendung von Qualitätssicherungsmaßnahmen unerlässlich. Hierzu gehören u.a. die Verwendung zuverlässiger Kalibrierstandards, die Kalibrierung mit definierten n-Isomeren, die Quantifizierung der Summe aus n-/br-Isomeren, der Einsatz isotopenmarkierter interner Standards für die LC-MS/MS Analyse, die Verwendung von Matrix-Referenzmaterialien sowie die Teilnahme an Ringversuchen. T2 - Schaffung von Laborkapazitäten zur Untersuchung PFAS-belasteter Abfälle CY - Potsdam, Germany DA - 11.09.2024 KW - PFAS KW - Ringversuch KW - Qualitätssicherung KW - Referenzmaterial PY - 2024 AN - OPUS4-61014 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pittner, Andreas T1 - Life cycle assessment of fusion welding processes methodology and implementation N2 - Fusion welding processes in manufacturing are resource-intensive, creating a significant opportunity to reduce their environmental impact. While the environmental effects of these processes are qualitatively understood, quantitatively assessing the key influencing parameters remains challenging. This study presents a welding-specific methodology leveraging life cycle assessment (LCA) to quantitatively measure the environmental footprint of fusion welding technologies. The proposed approach identifies and evaluates the critical parameters that influence the environmental performance of various welding methods, including conventional joint welding and additive manufacturing through the Direct Energy Deposition-Arc (DED-Arc) process. By incorporating real-time resource consumption data, the methodology provides a novel framework for directly linking process parameters to environmental impacts. This research offers a precise and quantitative analysis of the ecological effects of welding processes, supporting their optimization and promoting the development of more sustainable manufacturing practices. T2 - European welding association - executive meeting 2 CY - Milano, Italy DA - 03.12.2024 KW - Life cycle assessment KW - Fusion welding KW - Sensitivity study PY - 2024 AN - OPUS4-62018 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Stakeholder-Beteiligung und -Konsultation im Ökodesign-Rechtsrahmen N2 - Entlang des EU-Rechtssetzungsprozesses für Produktregulierungen im Ökodesign-Rechtsrahmen werden Möglichkeiten zur Beteiligung sowie die Konsultation der Europäischen Kommission von diversen Stakeholdergruppen erörtert. Darüber hinaus werden öffentliche Konsultationen und das Einbringen von Expertenwissen in Normung und Forschung skizziert. T2 - DIN-Infoveranstaltung: Ökodesign-Verordnung CY - Berlin, Germany DA - 06.10.2025 KW - Circular economy KW - Kreislaufwirtschaft KW - Rechtssetzung KW - Normung KW - Ecodesign PY - 2025 AN - OPUS4-64310 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Szymoniak, Paulina T1 - Vitrimers – new golden child of polymers? N2 - Vitrimers represent an innovative and promising class of sustainable materials poised as an alternative to conventional epoxy thermosets within the framework of the circular economy. Based on covalent adaptive networks (CANs), vitrimers exhibit dynamic bon d rearrangements upon external stimuli, endowing them with unique properties such as shape memory, self healing, and recyclability. These pioneering materials combine the robust mechanical behavior of classic lightweight thermosets with the inherent mallea bility of thermoplasts, making them highly attractive for next generation sustainable material applications. This study explores the intricate interplay between the nature of CANs and the macroscopic properties of newly developed vitrimers. The investigated material is a bio based vitrimer consisting of a glycerol triglycidyl ether (GTE) resin and a vanillin derived imine hardener (VA). This system represents an ideal biobased substitute for fossil derived epoxy resins and leverages a catalyst free imine metathesis mechanism to enable recycl ability. Despite the advantages of vitrimers, the molecular mechanisms governing their recyclability, particularly the dynamic exchange reactions, remain poorly understood. To gain deeper insights into these mechanisms, this study employs a combination of broadband dielectric spectroscopy , neutron scattering, mechanical spectroscopy, calorimetry, and dynamic thermal investigations. A systematic approach utilizing both standard and innovative characterization techniques is essential to unravel the synergistic relationship between molecular behavior, structure, and thermomechanical performance. This fundamental understanding will help propel vitrimers to the forefront of sustainable material science, advancing their practical implementation as recyclable polymer systems. T2 - Berlin-Brandenburgischer Verband für Polymerforschung Colloquium CY - Berlin, Germany DA - 28.04.2025 KW - Recycling KW - 3R PY - 2025 AN - OPUS4-64293 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meermann, Björn T1 - Species-specific isotope ratio analysis of proteins via CE/MC-ICP-MS N2 - Klassische Isotopenverhältnisanalyse (stabile IStope) läuft meistens im Rahmen einer bulk Analyse ab. Hierbei geht jedoch die Spezies-Information verloren. Ferner sind bulk Verfahren im Bereich der Probenvorbereitung aufwändig. Im Rahmen meines eingeladenen Vortrags werden neue CE/MC-ICP-MS Verfahren vorgestellt, die in meiner Gruppe entwickelt werden. T2 - 2024 Winter Conference on Plasma Spectrochemistry CY - Tucson, AZ, USA DA - 16.01.2024 KW - CE KW - MC-ICP-MS KW - Species specific isotopes PY - 2024 AN - OPUS4-62239 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Biyikal, Mustafa T1 - Development of a handheld device for the trace detection of explosives N2 - This presentation introduces a new explosives trace detector (ETD), a handheld device developed by True Detection Systems (TDS). Addressing the limitations of current handheld detectors—such as unreliable measurements and cumbersome operation— the new ETD XT-1 integrates advanced sensor technology, including a Lab-on-a-Chip, to deliver high sensitivity and accuracy. Capable of detecting trace levels of substances like TNT, TATP, and ammonium nitrate, the device offers rapid, user-friendly detection through AI/ML-enhanced algorithms. These algorithms enable precise substance identification by analyzing absorption and desorption rates, significantly reducing false positives. The XT-1 has broad applications in security, hazardous material detection, and environmental monitoring. T2 - Photonics Days Berlin Brandenburg CY - Berlin, Germany DA - 09.10.2024 KW - Explosives KW - Trace detection KW - Handheld device KW - Lab-on-a-chip KW - Fluorescence PY - 2024 AN - OPUS4-61433 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koerdt, Andrea T1 - Euro-MIC 2021-2025, our journey, and paths forward N2 - Microbiologically Influenced Corrosion (MIC) refers to the detrimental effects on materials caused by microorganisms, and it is becoming an increasingly significant issue for society. Unlike the USA, Canada, and Australia, Europe has less developed cooperation on MIC. Although several research groups and industrial stakeholders are addressing MIC, discussions remain fragmented, and information exchange is limited. A truly transdisciplinary approach is rarely seen. As a result, Europe often relies on methods, preventive measures, and standards from other regions, as there are no equivalent European standards. This situation makes Europe a) highly dependent, and b) in some cases, unable to use certain measures or standards due to European legal restrictions (e.g., the use of biocides). In 2021, researchers established the “Euro-MIC” network, financially supported by the EU project “COST-Action,” to tackle these issues. Through COST-Action, Euro-MIC aims to facilitate necessary interactions, communication, knowledge sharing, and training for personnel and researchers across various disciplines. COST-Action supports network activities, workshops, training schools, conferences, and more. Euro-MIC aspires to position Europe as a leader in MIC, promoting ideas on par with other nations while upholding European values and ensuring greater protection for people, property, and the environment. In this presentation, I will briefly introduce the principles of COST Action and highlight the significant opportunities provided by this EU-funded project. COST Action fosters interdisciplinarity, networking, training, scientific exchange, and the promotion of young scientists. By showcasing some examples of CA20130 COST ACTION Euro-MIC, I hope to demonstrate that COST Action is not only relevant for addressing MIC but can also be applied to other important topics and sectors. T2 - Unseen Corrosion: Unveiling Hidden Threats and Innovating Monitoring Solutions CY - Bergen, Norway DA - 15.05.2025 KW - COST Action CA20130 KW - MIC KW - Network KW - Corrosion KW - Microorganisms PY - 2025 UR - https://www.norceresearch.no/en/events/unseen-corrosion AN - OPUS4-63726 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Entwicklungen zur Circular Economy in Rechssetzung und Normung N2 - Zusammenfassung der Implementierung von Circular Economy Prinzipien in der Rechtssetzung und Normung. Schwerpunkte sind das EU-Produktrecht, Bewertungsmethoden zur Zirkularität von Produkten und angekündigte EU-Rechtsrahmen und ihre Ausgestaltung. T2 - Industrieforum Global Environmental Compliance CY - Online meeting DA - 06.11.2025 KW - Circular economy KW - Rechtssetzung KW - Normung KW - Politikberatung KW - Ecodesign PY - 2025 AN - OPUS4-64601 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koerdt, Andrea T1 - Mikrobielle Einflüsse auf Wasserstoffspeicherung: Materialien, Abbauprozesse und Teststrategien N2 - Wasserstoff gilt als Schlüsseltechnologie für die Energiewende – doch seine sichere Anwendung stellt neue Anforderungen an Technik, Infrastruktur und Personal. Die Veranstaltung „H₂ Sicherheit“ bietet eine umfassende Plattform, um sich über die sicherheitsrelevanten Aspekte von Wasserstoff zu informieren und praxisnahe Lösungen kennenzulernen. Expert:innen aus Forschung, Industrie und Netzbetrieb geben Einblicke in aktuelle Entwicklungen, Herausforderungen und Best Practices. Fokus dieser Präsentation war der Mikrobielle Einfluss bei der unterirdischen Speicherung von Wasserstoff und das neuartige Testsystem (MISTRAL) T2 - DVGW- H₂ Sicherheit | 26. – 27. November 2025 CY - Online meeting DA - 26.11.2025 KW - MIC KW - MISTRAL KW - Hochdruckbehälter KW - Wasserstoff KW - Unterirdische geologische Formationen PY - 2025 AN - OPUS4-64890 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schumacher, Julia T1 - Knufia petricola – a model for exploring the biology of black rock-inhabiting fungi N2 - Black fungi also called black yeasts, rock-inhabiting fungi or microcolonial fungi are a group of Ascomycetes [Eurotiomycetes, Arthoniomycetes and Dothideomycetes] that exhibit high stress tolerance, yeast‑like or meristematic growth, and constitutive 1,8-dihydroxynaphthalene (DHN) melanin formation. They dominate a range of hostile natural and man‑made environments – from desert rocks and salterns to dishwashers, roofs, and solar panels. Due to their slow growth and the lack of sexual cycles and genetic tools, the underlying mechanisms of black fungi’s phenotypic traits have remained largely unexplored. We consider the rock inhabitant K. petricola [Eurotiomycetes, Chaetothyriales] a suitable model for studying the phenotypic characteristics of black fungi. With K. petricola the regulation of pigment synthesis, general stress responses and the unusual modes of cell division can be dissected by advanced reverse and forward genetics approaches. The genome of K. petricola strain A95 was sequenced using a combination of short high quality Illumina reads and long PacBio reads. The final assembly consists of twelve contigs: five complete chromosomes and six contigs with one telomer each. Gene annotation supported by transcriptomics and proteomics data was manually curated. Recently, we developed a set of genetic tools to manipulate the genome for analyzing gene functions and studying the cell biology. This set includes CRISPR/Cas9-based genome editing and live-cell imaging using genetically encoded fluorescent proteins, as well as protocols for -omics approaches and for simulation of mineral weathering in the laboratory. Mutants defective in DHN melanogenesis, carotenogenesis or both processes are currently studied to elucidate the role of these protective pigments in tolerance of natural and man-made stresses, weathering of olivine, penetration of marble, and adhesion to surfaces. Further, the established protocols and knowledge gained from K. petricola form a starting point for making other extremotolerant black fungi accessible to genetic manipulation. T2 - 31st Fungal Genetics Conference CY - USA, CA, Pacific Grove DA - 15.03.2022 KW - Black fungi KW - Melanin KW - Genome editing PY - 2022 AN - OPUS4-54585 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Biocide Resistance - Road to Risk Assessment N2 - This presentation details the current status of biocide resistance risk assessment and provides a roadmap for future activities. T2 - OECD, 6th Meeting of the Working Party on Biocides CY - Paris, France DA - 28.09.2022 KW - Antimicrobial resistance KW - Antimicrobial coating KW - Standardization KW - Biocides KW - Risk assessment PY - 2022 AN - OPUS4-56263 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Die Entstehung von antimikrobiellen Resistenzen durch die Verwendung von Bioziden N2 - Dieser Vortrag gibt einen Überblick über die BAM und die Aktivitäten im Bereich Biozidresistenz. T2 - Berliner Hochschule für Technik Studiengang Biotechnologie CY - Berlin, Germany DA - 05.05.2023 KW - Antimikrobielle Resistenz KW - Antmikrobielle Oberflächen KW - Standardisierung PY - 2023 AN - OPUS4-57859 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herzel, Hannes T1 - Klärschlammasche Monitoring 2022/23 - Erste Ergebnisse: P Löslichkeiten & Schwermetalle N2 - Im Rahmen des BMBF Projektes R-Rhenania wurden von fast allen Monoverbrennungsanlagen in Deutschland Klärschlammasche-Probeneingesammelt. Diese Aschen wurden auf die Gesamtchemie-Zusammensetzung, Schwermetalle und die Löslichkeit des Phosphates untersucht. T2 - 95. Sitzung des DWA Fachausschusses KEK 3 CY - Hannover, Germany DA - 27.11.2023 KW - Phosphor KW - Monoverbrennungsanlage KW - Neutralammoniumcitrat KW - Zitronensäure PY - 2023 AN - OPUS4-59437 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gorbushina, Anna T1 - Black fungi on technosphere surfaces: new niches for roof-inhabiting cousins N2 - Human-made systems, also called “build environment” or “technosphere”, sustain human comfort as well as our industrial activities. These systems have become particularly widespread since the Industrial Revolution, i.e., since the 17th century. At the same time, these technical systems – buildings, monuments, energy production, transformation and transmission, water purification and supply systems - serve as new habitats for living organisms. Life is ubiquitously present on our planet since a very long time: the Earth is 4.54 billion years old and microbial communities have played a key role on our planet for 3.7 billion years. Once human-made system appeared, microorganisms became an integral part of all types of technosphere infrastructure as well. Here we will illustrate biosphere-technosphere interactions using a specific example of the black fungi and their impact on the efficiency of solar (photovoltaic) panels. This expanding renewable infrastructure for electricity generation is growing on all continents - and create a specific, arid habitat for stress-tolerant black fungi. Black fungi were once discovered in hot and cold natural deserts – and now belong to the persistent colonisers of human-made deserts of solar parks. This new niche is evolving an impressive biodiversity. So far more than 60 isolates of black fungi belonging to Arthoniomycetes, Eurotiomycetes and Dothideomycetes were obtained from solar panels in Europe and Americas. Here we will present the analysis of this emerging anthropogenic biodiversity. Opportunities for future research in the field include quantification of the microbial load on technosphere surfaces – along with characterisation of the corresponding microbial diversity. The strategy of precise measurement and characterisation will enable us to reliably determine the beneficial and harmful functions that living microorganisms play in the functioning of energy-generating systems – and technosphere in general. T2 - IUBMB Focused Meeting on Extremophilic Fungi (FUN-EX) CY - Ljubljana, Slovenia DA - 19.09.2923 KW - Biosphere-technosphere interaction KW - Microbial communities KW - Solar parks PY - 2023 AN - OPUS4-58451 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herzel, Hannes T1 - Success-Story CaNaPO4: Erfolgreiche REACH Registrierung und Inbetriebnahme großtechnischer Anlagen N2 - Aufgrund der Vorgaben in der novellierten Klärschlammverordnung 2017 (AbfKlärV) wird für die meisten Kläranlagen ab 2029 verpflichtend das enthaltene Phosphat zurückzugewinnen bzw. einer Phosphatrückgewinnung zuzuführen. Aktuell gehen dafür einige thermochemische als auch nasschemische Verfahren in Betrieb. Die meisten thermochemischen Verfahren arbeiten mit einer vergleichbaren Grundidee. Es werden Alkali-Additive wie Na2CO3 vor der thermischen Behandlung eingemischt. Die anschließend produzierten thermochemischen Rezyklate enthalten als Phosphatphasen Calciumalkaliphosphate wie CaNaPO4, welche zu hoher Phosphatlöslichkeit und Pflanzenverfügbarkeit in den Rezyklaten führen. Aktuell werden solche thermochemischen Verfahren an den Standorten Altenstadt (Oberbayern), Michelstadt (Odenwald) und Breisach-Grezhausen (nähe Freiburg) in Betrieb genommen. T2 - Berliner Klärschlamm Konferenz CY - Berlin, Germany DA - 11.11.2025 KW - Phosphor KW - Recycling KW - Großtechnik KW - Dünger PY - 2025 AN - OPUS4-64710 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herzel, Hannes A1 - Adam, Christian T1 - P-Rückgewinnung aus Klärschlammasche - AshDec® Verfahren N2 - Klärschlammaschen können eine hohe Phosphatkonzentration aufweisen und stellen damit einen geeigneten Sekundärrohstoff für die Produktion von Phosphatdüngemitteln dar. Bisher wird dieses Potential der Klärschlammaschen für die Phosphor-Rückgewinnung jedoch kaum genutzt, da die in den Aschen enthaltenen Phosphate für Pflanzen kaum verfügbar und die Aschen teilweise mit toxischen Schwermetallen belastet sind. Im AshDec®-Verfahren wird die Klärschlammaschen im Drehrohrofen im Temperaturbereich 800-1000°C unter Zugabe von Alkali-Additiven (bsp. Na2CO3) thermochemisch behandelt, um ein wirksames und schadstoffarmes Phosphatdüngemittel herzustellen. Aktuell bereitet die Firma Emter GmbH den Bau der ersten großtechnischen AshDec®-Anlage mit einer Kapazität von 30.000 Jahrestonnen Klärschlammasche am Standort ihrer Klärschlammverbrennungsanlage (Altenstadt / Oberbayern) vor. Die erste Ausbaustufe dieser Anlage wird durch das BMBF-Projekt R-Rhenania im Rahmen der Förderinitiative RePhoR begleitet. T2 - 2. Thüringer Klärschlammkommunalkonferenz CY - Thüringer Ministerium für Umwelt, Energie und Naturschutz DA - 21.06.2022 KW - Rückgewinnung KW - Phosphor KW - Klärschlamm KW - Dünger PY - 2022 AN - OPUS4-55088 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herzel, Hannes T1 - Thermochemisches P Recycling aus Klärschlamm - Erste großtechnische Anlage am Standort Altenstadt (Bayern) N2 - Im Verbundprojekt R-Rhenania wird eine industrielle Demonstrationsanlage am Standort der Monoverbrennungsanlage Altenstadt der Firma Emter errichtet und im Jahr 2024 den Betrieb aufnehmen. Die vorhandene Rostfeuerung-Monoverbrennung wird so umgebaut, dass ein neues thermochemisches Verfahren integriert werden kann, welches hochwirksame und schadstoffarme Dünger produziert (bis zu 17.000 t/a). Die thermochemischen Produkte werden in Gefäß- und Feldversuchen im ökologischen Landbau auf ihre Düngewirkung getestet. Die Umweltverträglichkeit der Demonstrationsanlage wird untersucht, wie auch die Übertragbarkeit des Verfahrens auf weitere Regionen. T2 - 13. VDI Klärschlammbehandlung CY - Koblenz, Germany DA - 14.09.2022 KW - Phosphor KW - Versuchskampagne KW - Recycling KW - Nährstoffe KW - Dünger PY - 2022 AN - OPUS4-59576 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian T1 - Schadstoffe/Störstoffe versus Recycling - Diskussion ausgewählter Beispiele N2 - Im Vortrag wurde anhand dreier Beispiele diskutiert, wie sich die Festlegung von Grenzwerten auf das Recycling von Sekundärrohstoffen auswirken kann. Die Diskussion mit Fachleuten soll die Ausgestaltung der Urban Mining Strategie des BMUV unterstützen. T2 - KartAL V Fachgespräch zur Entwicklung einer nationalen Urban Mining Strategie "Schadstoffe versus Recycling" CY - Dresden, Germany DA - 30.10.2024 KW - Urban Mining KW - Schadstoffgrenzwerte PY - 2024 AN - OPUS4-61512 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schumacher, Julia T1 - Genetic engineering of black fungi: lessons learned from Knufia petricola N2 - The exponential rise in the number of fungal genomes sequenced by next-generation sequencing techniques makes it necessary to increase efforts to correctly annotate and assign gene functions. There are two possibilities to explore a genome and its gene functions. The hypothesis-based method proves the function of already existing gene/allele candidates by targeted mutagenesis - so called reverse genetics. The basis of forward genetics approaches is the random mutagenesis of the genome, followed by screening of obtained mutants for the phenotype of interest, and identification of the mutated genes in the respective mutants. This strategy is hypothesis-generating, means it is necessary to verify the relationship between the detected mutations and the observed phenotype by targeted mutagenesis of the identified gene. We developed a toolbox for editing the genome of the rock inhabitant Knufia petricola [Eurotiomycetes, Chaetothyriales] that allows the study of the phenotypic characteristics of black fungi such as the regulation of pigment synthesis, general stress responses, oligotrophy, and the unusual modes of cell division by advanced reverse and forward genetics approaches. The toolbox includes the annotated genome sequence of strain A95, efficient strategies for CRISPR/Cas9-based genome editing and live-cell imaging using genetically encoded fluorescent proteins, as well as protocols for -omics approaches and for simulation of mineral weathering. A forward genetics approach using transposon mutagenesis is currently developed for identifying essential genes. The established protocols and knowledge gained from K. petricola form a starting point for making other fungi from extreme environments accessible to genetic manipulation. T2 - IUBMB Focused Meeting on Extremophilic Fungi (FUN-EX) CY - Ljubljana, Slovenia DA - 19.09.2023 KW - Fungus KW - Extremotolerance KW - Genetics KW - Model organism PY - 2023 AN - OPUS4-58424 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gorbushina, Anna T1 - Biofilms in transition: from unwanted layer to material actor N2 - Biofilms on material surfaces have long been regarded as unwanted biological layers and deposits — a kind of living patina. As our knowledge of them is growing, their role is currently undergoing transformation, revealing surprising capacities for problem-solving and material alteration and design. Together, we can explore new perspectives on the interplay between vitality, materiality, and design, challenging conventional boundaries between nature, technology, and aesthetics. T2 - https://www.matters-of-activity.de/en/activities/17716/materials-and-materialities-critical-conversations-across-the-humanities-and-sciences CY - Berlin, Germany DA - 16.10.2025 KW - Reference organisms KW - Reproducible experiments KW - Model biofilms PY - 2025 AN - OPUS4-64495 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schumacher, Julia T1 - Fungi in extreme habitats: Lessons from the microcolonial black fungus Knufia petricola N2 - Fungi that share light-flooded habitats with phototrophs may profit from their excess photosynthetic products. But to cope with sunlight-associated stresses [e.g. high temperatures, UV radiation with associated DNA damage, accumulation of reactive oxygen species (ROS), desiccation and osmotic stresses] it is important for fungi to accurately sense and respond to changes in light. The genomes of black [dihydroxynaphthalene (DHN) melanin-containing] fungi from phyllosphere and exposed solid surfaces contain multiple photoreceptors (PRs). The plant pathogen Botrytis cinerea (Leotiomycetes) has a highly sophisticated photosensory and signalling system that helps to avoid light and to locate susceptible hosts. Rock-inhabiting Dothideomycetes and Eurotiomycetes including Knufia petricola possess equal numbers of PRs along with the same set of protective pigments. This similarity between black fungi from plant and rock surfaces suggests that photoperception and -regulation are important for fungi that receive nutrients through cooperation with phototrophs. T2 - Gordon Research Conference "Cellular and Molecular Fungal Biology" CY - Holderness, NH, USA DA - 26.06.2022 KW - Light KW - Stress KW - Photoperception KW - Pigments PY - 2022 AN - OPUS4-55249 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schumacher, Julia T1 - Light-dependent development in Botrytis cinerea N2 - Sunlight is an important environmental factor is almost all ecosystems by being a source of energy, information, and stress. All organisms must protect themselves from the harmful effects of light such as UV radiation, ROS accumulation, heat, and desiccation. Finally, light qualities and quantities can be used for decision making, timing and as guide for directed growth when they are sensed and transduced into intracellular signals. Botrytis cinerea and other plant pathogens infecting the sun-exposed parts of the plant must cope with the high light conditions the host plant seeks. Further they experience an altered light spectrum (‘green gap’) when they colonize shaded parts of the plant; it is depleted for blue and red light that is absorbed by the plant chlorophyll and enriched for green and far-red light that is reflected or transmitted by the plant tissue. As these ambient light conditions trigger the shade avoidance response in the plant, the pathogens may trigger their own ‘shading response’ such as the upregulation of virulence determinants and inoculum production. B. cinerea maintains a highly sophisticated light signaling machinery that senses different light qualities to trigger a variety of responses, that are protection, morphogenesis, positive and negative tropisms, and entrainment. These characteristics render B. cinerea a valuable model to enlighten the role of light in parasitic fungus-plant interactions and beyond. The vegetative mycelium – the core of all infection and developmental programs – is not visibly pigmented and thus considered to be sensitive to biotic and abiotic stresses. However, the vegetative hyphae have a very limited half-life and are usually restricted to the invasive growth phase in which they are protected from light by the plant tissue. Fast colonization of host tissues and by this proper nutrient acquisition enables the rapid formation of long-lasting reproduction structures (melanized conidiophores with conidia, sclerotia) on the surfaces of rotted plant tissues. Depending on the light and temperature conditions, conidiation or sclerotial development is initiated. Taken together, B. cinerea uses light-regulated signaling networks to avoid light whenever possible; for example, by minimizing the half-life of sensitive cells that are hiding in plant tissues and by scheduling critical steps such as conidiogenesis, conidial germination and penetration of plant tissues for the night. T2 - BotrySclero2022 CY - Avignon, France DA - 13.06.2022 KW - Fungus KW - Light KW - Stress KW - Melanin PY - 2022 AN - OPUS4-55248 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogel, Christian T1 - Per- und polyfluorierte Alkylsubstanzen (PFAS) während der Klärschlammverbrennung – Analytische Methoden zur Überwachung N2 - Per- and polyfluoroalkyl substances (PFAS) are a group of more than 12,000 anionic cationic, zwitterionic and neutral anthropologic substances which have been used extensively in a variety of products and industries due to their lipo- and hydrophobic properties, and inert physical and chemical stability. As a result of continuous use of fluorinated consumer products, effluents and sewage sludge from wastewater treatment plants (WWTPs) have been shown to be an important source of PFAS contamination in the environment. While environmental exposure of organic pollutants like PFAS, pesticides and pharmaceuticals have to be avoided, phosphorus from sewage sludge must be used in Germany among other things to produce high-quality P-fertilizers for a circular economy. However, the fate of legacy and emerging PFAS compounds during sewage sludge incineration or pyrolysis is for the most parts still unknown. In particular, PFAS analysis in exhaust air from industrial facilities has not yet been standardized in Germany, which means that no comparable results are available for possible regulation. T2 - Berliner Klärschlamm Konferenz CY - Berlin, Germany DA - 11.11.2024 KW - Klärschlamm KW - Per- and Polyfluoroalkyl substances (PFAS) PY - 2024 AN - OPUS4-61628 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herzel, Hannes T1 - Modifiziertes Rhenania Phosphat aus der Klärschlammverbrennung mit thermochemischem Aufschluss N2 - Der Betreiber der Klärschlammverbrennungsanlage Altenstadt (Emter GmbH) integriert einen thermochemischen Prozessschritt in die vorhandene Monoverbrennung und erweitert die Anlage entsprechend, um einen Ausgangsstoff für die Düngemittelproduktion zu erzeugen und damit zur Phosphatrückgewinnung gemäß Klärschlammverordnung (AbfKlärV) beizutragen. Die Umrüstung der Anlage fand im ersten Halbjahr 2024 statt und seit Sommer 2024 steht eine Kapazität für die jährliche Produktion von 15.000 Tonnen schadstoffarmen R-Rhenania Phosphat mit hochwirksamen Phosphatverbindungen zur Verfügung. Diese Demonstrationsanlage wird durch ein wissenschaftliches Monitoring im vom BMFTR geförderte Projekt R-Rhenania (2020-2026) mit u.a. Ökobilanzierungen, Gefäß- und Feldversuche begleitet. Der Projektpartner sePura plant den produzierten Dünger vollständig regional in Bayern zu verwerten. T2 - P-RÜCK – 11. Phosphor Kongress CY - Stuttgart, Germany DA - 19.11.2025 KW - Phosphor KW - Recycling KW - Thermochemisch KW - Großtechnik KW - Klärschlamm PY - 2025 AN - OPUS4-65018 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Oberbeckmann, Sonja T1 - On the intersection of microbiome and material research: what can be achieved? N2 - Any surface in the environment acts as hotspot for microbial attachment and activity. These biofilms represent the interface between humans and the environment. While in the past biofilms were often seen as disturbance, we now start to understand the enormous potential of beneficial biofilms. They can be used in a broad range of applications and are sources for new microorganisms and traits. After all, biofilms represent a great example for a collaborative lifestyle. T2 - Bioeconomy Changemakers Festival, Hereon CY - Teltow, Germany DA - 14.03.2024 KW - Biofilm KW - Microbiome KW - Sustainability KW - Biosphere KW - Microplastics PY - 2024 AN - OPUS4-60202 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian T1 - Erzeugung klimaschonender Bindemittel als Alternativen zu Zement N2 - Die Zementindustrie und weitere energieintensive Industrien wie etwa die Stahlindustrie stehen vor dem Hintergrund der Transformation unserer Gesellschaft zur Klimaneutralität vor erheblichen Herausforderungen. Ziel dieser Branchen ist perspektivisch die vollständige Vermeidung klimaschädlicher Emissionen – mit besonderem Fokus auf Kohlendioxid. Neben der Umstellung auf regenerative Energieträger, sind im Speziellen für die Zementindustrie die erheblichen Anteile an CO2-Emissionen durch die Entsäuerung von Kalkstein zukünftig zu vermeiden. Da die hervorragenden Bindemitteleigenschaften des bisher hauptsächlich in Zementen eingesetzten Portlandklinkers jedoch auf Calciumverbindungen wie Tri- und Di-calciumsilikaten basieren, stellt die Substitution des Kalks derzeit für die Zementindustrie die größte Herausforderung dar. Neben vollständig neuen Bindemittelsystemen ohne Verwendung von Kalk und CCS/CCU-Technologien zur Vermeidung der CO2-Emissionen bei Verwendung von Kalk, können Abfälle und Nebenprodukte wie etwa Betonbrechsand, verschiedene Schlacken und weitere Massenreststoffe sinnvoll zur Einsparung von Rohstoffen und zur Vermeidung von CO2-Emissionen eingesetzt werden. Es gilt diese Potentiale von Sekundärrohstoffen branchenübergreifend zu identifizieren und Synergien zwischen den Branchen nutzbar zu machen. Hierbei werden neben der chemischen Zusammensetzung der Abfälle und Nebenprodukte auch die Verfügbarkeit und der Massenstrom relevante Kriterien sein. Die potenziellen Sekundärrohstoffe und deren Gemische mit chemisch ähnlicher Zusammensetzung wie die bisher verwendeten Bindemittel, können durch verschiedene technische Ansätze wieder in reaktive Bindemittel umgewandelt und damit nutzbar gemacht werden. Eine gezielte Umwandlung der nicht reaktiven mineralischen Phasen in neue mineralische Phasen mit guten Bindemitteleigenschaften, kann u. a. durch Schmelzprozesse erzielt werden. In Schmelzen können bei hohen Temperaturen die bestehenden, nicht reaktiven mineralischen Phasen zerstört und neue mineralische Phasen mit guten Bindemitteleigenschaften erzeugt werden. Hohe Freiheitsgrade durch gezielte Einstellung der stofflichen Zusammensetzung der Schmelze, durch Stoffseparationen und durch geregelte Abkühlregimes können eine maßgeschneiderte Erzeugung neuer Bindemitteltypen ermöglichen. Aufgrund der hohen erforderlichen Temperaturen von Schmelzprozessen ist die Umsetzung dieser neuen Verfahren nach Möglichkeit in bestehenden pyrometallurgischen Produktionsrouten wie etwa der Stahlproduktion vorzunehmen. So kann etwa der Einsatz von Betonbrechsand als Schlackebildner in der Stahlproduktion zielführend sein, wenn die Schlacke wieder zu einem Bindemittel prozessiert wird und in Zementen Verwendung findet. Eine stoffliche Kreislaufführung wäre hiermit gegeben, wobei der Einsatz von Kalkstein als Schlackebildner oder Rohstoff für die Zementproduktion, und damit die entsprechenden CO2-Emissionen, vermieden werden. Die Entwicklung neuartiger Bindemittelsysteme auf Basis von Sekundärrohstoffen sollte von erforderlichen Anpassungen und neuen Entwicklungen in der Regelsetzung und Normung begleitet werden. Vor allem muss gewährleistet sein, dass die mit neuen Bindemitteln hergestellten Betone den hohen Anforderungen an Dauerhaftigkeit und Umweltverträglichkeit genügen. Des Weiteren sollte mit den etablierten Methoden, wie etwa der Lebenszyklusanalyse, untersucht werden, inwiefern und in welchem Umfang die neuen technischen Entwicklungen zu Nachhaltigkeit und Klimaschutz beitragen. T2 - Berliner Konferenz Mineralische Nebenprodukte und Abfälle CY - Berlin, Germany DA - 25.04.2022 KW - Zement KW - Thermochemische Prozesse KW - Sekundärrohstoffe PY - 2022 AN - OPUS4-54738 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian T1 - Gewinnung von grünem Eisen und weiteren Wertstoffen aus Rotschlamm mittels Wasserstoffplasma N2 - Rotschlamm fällt in sehr großen Mengen bei der Herstellung von Aluminiumoxid an und wird fast ausschließlich deponiert. Es wird eine neue Technologie vorgestellt bei der das im Rotschlamm enthaltene Eisenoxid mittels Wasserstoffplasma reduziert wird. Es wird ein Reaktionsmechanismus über Titanomagnetit und Hercynit vorgeschlagen. T2 - Berliner Konferenz Metallkreisläufe CY - Berlin, Germany DA - 13.03.2024 KW - Rotschlamm KW - Wasserstoffplasma PY - 2024 AN - OPUS4-59722 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute T1 - Reuse and recycling in construction using clay as building material N2 - Clay is increasingly coming back into people's consciousness with the demand for ecological, healthy and sustainable building materials. Earthen building materials, including clay from the historical building stock, offer a high potential for their reusability and thus for saving natural resources. Unfired clay can be reused at any time and indefinitely. Dry clay only needs to be crushed and moistened with water and it can be processed again. However, there exist only a few studies on the contamination with pollutants and on the accumulation of salts in existing historic buildings regarding the evaluation of reuse potential. Within the framework of a project, preliminary tests are being carried out taking into account the previous usage of the buildings. In order to evaluate the suitability for indoor use, the potential transfer of volatile organic compounds into the air is investigated. Fine fractions of C&D waste (particle size less than 2 mm) are currently mostly landfilled. However, such materials can be suitable for substituting primary resources of earthen building materials provided they are adequately processed. Therefore, in another research project it is investigated whether and to what extent fine and ultra-fine fractions of construction and demolition waste processed by washing can be employed for that purpose. The recycled fines are investigated considering organic and inorganic contaminants in solid matter and leaching tests are carried out to assess the potential to mobilize harmful substances. Additionally, the recycled fines are investigated in emission test chambers regarding indoor air requirements to construction products. The results will be transferred to standardization work as in Germany in standards for earthen building materials only aggregates and binders from natural sources are permitted currently. T2 - WASCON 2023 - 11th International Conference on the Environmental and Technical Implications of Construction with Alternative Materials CY - Hongkong DA - 13.12.2023 KW - Earthen building materials KW - Clay KW - Recycled aggregates PY - 2023 AN - OPUS4-61004 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herzel, Hannes T1 - Erste Ergebnisse aus dem Klärschlammasche-Monitoring 2022-2025 N2 - Die BAM beschafft möglichst alle Klärschlammaschen aus deutschen Klärschlammverbrennungsanlagen. Die BAM hatte hierzu in den Jahren 2012/2013 ein breit angelegtes Monitoring deutscher Klärschlammverbrennungsanlagen durchgeführt (Krüger et al., 2014 ), was als Ausgangslage für die Probenakquise und die Einordnung und Interpretation der Ergebnisse dient. Die Aschen werden eingehend chemisch-mineralogisch charakterisiert. T2 - DWA - Perspektiven der Klärschlammverwertung CY - Bremen, Germany DA - 10.09.2024 KW - Phosphor KW - Deutschland KW - Analyse KW - Monoverbrennung PY - 2024 AN - OPUS4-61917 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herzel, Hannes T1 - Klärschlammasche Monitoring 2022/23 - P-Löslichkeiten und Schwermetallgehalte N2 - Im Rahmen des BMBF Projektes R-Rhenania wurden von fast allen Monoverbrennungsanlagen in Deutschland Klärschlammasche-Proben eingesammelt. Diese Aschen wurden auf die Gesamtchemie-Zusammensetzung, Schwermetalle und die Löslichkeit des Phosphates untersucht. T2 - 6. Berliner Klärschlammkonferenz BKK CY - Berlin, Germany DA - 13.11.2023 KW - Monoverbrennungsanlage KW - Phosphor KW - Neutralammoniumnitrat KW - Zitronensäure PY - 2023 AN - OPUS4-59436 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herzel, Hannes T1 - Rückholbarkeit Klärschlammaschen aus Langzeitlagern N2 - Das Institut für Siedlungswasserwirtschaft (ISA) der RWTH Aachen University sowie die Bundesanstalt für Materialforschung und -prüfung (BAM) untersuchen gemeinsam fünf deponierte KSA, die von drei Deponiebetreibern ausgebaut und zur Verfügung gestellt wurden sind. Im Fokus der Untersuchungen stehen die physikalische und chemische Charakterisierung der deponierten KSA sowie deren P-Rückgewinnungspotenzial bei der Behandlung in thermochemischen sowie nasschemischen Verfahren. Diese Ergebnisse werden im Vergleich mit „frischen“, also nicht deponierten KSA-Proben vergleichbarer Herkunft bewertet, um so den Einfluss der Lagerung auf die KSA zu erfassen. T2 - 4. Sitzung der LAGA AG Sicherstellung der Phosphorrückgewinnung bis 2029 CY - Berlin, Germany DA - 17.07.2025 KW - Deponie KW - Recycling KW - langzeitlagerung KW - Phosphor PY - 2025 AN - OPUS4-64795 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian T1 - Modifiziertes Rhenania Phosphat aus der Klärschlammverbrennung mit thermochemischem Aufschluss N2 - Es wurde der Stand des BMFTR-Projekts R-Rhenania vorgestellt. Mit einem thermochemischen Aufschluss werden Phosphatphasen in Klärschlämmen bei der Verbrennung zu bioverfügbaren Phosphaten mit guter Düngewirkung umgewandelt. Gleichzeitig werden im Prozess Schwermetalle über die Gasphase entfernt. Die Düngewirkung ist vergleichbar mit konventionellen P-Düngern wie TSP und wurde in Gefäß- und Feldversuchen im ökologischen Landbau nachgewiesen. Der Prozess wird großtechnisch in der Monoverbrennungsanlage Altenstadt, Oberbayern, umgesetzt. T2 - KlärschlammTage Würzburg CY - Würzburg, Germany DA - 03.06.2025 KW - Klärschlamm KW - Phosphorrecycling KW - Recyclingdünger KW - Rhenaniaphosphat PY - 2025 AN - OPUS4-63325 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rurack, Knut T1 - Advanced Onsite Analysis for Point-of-Need Applications: Innovations for Robust, Reliable, and User-Friendly Detection N2 - The advancement of portable analytical assays has transformed onsite analysis in several areas, including food safety, environmental monitoring and forensics. The SARS-CoV-2 pandemic has fueled a need for rapid, onsite solutions that enable immediate decision making without the need for and use of laboratory infrastructure. The integration of mobile devices with advanced cameras and significant computing power improves the accessibility and usability of these tests. However, many current methods are limited to the detection of single parameters. The next challenge is to develop robust multiplexed assays that can analyze multiple parameters simultaneously with high sensitivity. In this lecture, innovative approaches developed at BAM will be presented with a focus on supramolecular chemistry, luminescence detection, nanomaterials and miniaturization of devices. Examples will include mesoporous nanomaterials, gated indicator systems, imprinted polymers, microfluidic devices, test strips and smartphone-based analytical tools, focusing on two use cases, i.e., the detection of contaminants in surface waters and immunoanalytical explosives detection. T2 - International Conference on Emergin Trends in Materials Chemistry CY - Coimbatore, India DA - 03.04.2025 KW - Onsite analysis KW - Rapid tests KW - Mobile devices KW - Supramolecular chemistry KW - Fluorescence PY - 2025 AN - OPUS4-65434 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, S. T1 - Langzeitlagerung von Klärschlammaschen ab 2029? Erste Erfahrungen zur Phosphorrückgewinnung aus deponierten Klärschlammverbrennungsaschen N2 - Das Institut für Siedlungswasserwirtschaft (ISA) der RWTH Aachen University sowie die Bundesanstalt für Materialforschung und -prüfung (BAM) untersuchen gemeinsam fünf deponierte KSA, die von drei Deponiebetreibern ausgebaut und zur Verfügung gestellt wurden sind. Im Fokus der Untersuchungen stehen die physikalische und chemische Charakterisierung der deponierten KSA sowie deren P-Rückgewinnungspotenzial bei der Behandlung in thermochemischen sowie nasschemischen Verfahren. Diese Ergebnisse werden im Vergleich mit „frischen“, also nicht deponierten KSA-Proben vergleichbarer Herkunft bewertet, um so den Einfluss der Lagerung auf die KSA zu erfassen. T2 - Berliner Klärschlamm Konferenz CY - Berlin, Germany DA - 11.11.2025 KW - Phosphor KW - Langzeitlagerung KW - Deponie KW - Rückgewinnung KW - Klärschlammasche PY - 2025 AN - OPUS4-64832 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herzel, Hannes T1 - Zwischenlagerung von Klärschlammaschen ab 2029? N2 - Das Institut für Siedlungswasserwirtschaft (ISA) der RWTH Aachen University sowie die Bundesanstalt für Materialforschung und -prüfung (BAM) untersuchen gemeinsam fünf deponierte KSA, die von drei Deponiebetreibern ausgebaut und zur Verfügung gestellt wurden sind. Im Fokus der Untersuchungen stehen die physikalische und chemische Charakterisierung der deponierten KSA sowie deren P-Rückgewinnungspotenzial bei der Behandlung in thermochemischen sowie nasschemischen Verfahren. Diese Ergebnisse werden im Vergleich mit „frischen“, also nicht deponierten KSA-Proben vergleichbarer Herkunft bewertet, um so den Einfluss der Lagerung auf die KSA zu erfassen. T2 - Kölner Kanal und Kläranlagen Kolloquium CY - Cologne, Germany DA - 08.09.2025 KW - Deponie KW - Langzeitlagerung KW - Phosphor KW - Klärschlammasche PY - 2025 AN - OPUS4-64792 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Development of a laboratory method to assess resistance development of microorganisms to biocides – An update N2 - This presentation describes the development of a laboratory method to assess resistance development of microorganisms to biocides and antimicrobial surfaces. T2 - The International Biodeterioration Research Group (IBRG) autumn meeting 2022 CY - Online meeting DA - 11.10.2022 KW - Antimicrobial resistance KW - Antimicrobial coating KW - Standardization KW - Biocides KW - Risk assessment PY - 2022 AN - OPUS4-56264 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wöhlecke, Andreas T1 - Die Spannungsrissbeständigkeit von Kunststoffdichtungsbahnen aus PE-HD und die Zulassungsrichtlinie für Schutzschichten N2 - Kunststoffdichtungsbahnen (KDB) aus PE-HD (Polyethylen hoher Dichte) werden häufig zur Abdichtung von Bauwerken in der Geotechnik verwendet. Diese Produkte werden aus einem Kunststoff mit relativ komplexer Zusammensetzung hergestellt. Um eine Aussage über die Haltbarkeit von KDB aus PE-HD treffen zu können, muss das Materialverhalten berücksichtigt werden. In diesem Zusammenhang sind die wichtigsten Aspekte der Dauerhaftigkeit die Spannungsrissbeständigkeit und die Beständigkeit gegen Oxidation. Verschiedene PE-Sorten weisen eine unterschiedliche Spannungsrissbeständigkeit auf. Um dieser Eigenschaft von PE-HD zu begegnen, werden nur KDB aus sehr hochwertigen Rohstoffen zugelassen. Auf der anderen Seite werden hohe Anforderungen an die umgebenden Schichten, wie Auflager und Schutzschicht gestellt, um möglichst geringe Spannungen zu erzeugen und damit Dehnungen die Dehnungen der KDB gering zu halten. Bestimmte Medien, die bei den betreffenden Prüfungen verwendet werden, dürfen nicht mehr in der EU in Verkehr gebracht werden. Im Folgenden sollen die Zusammenhänge in Kürze dargestellt werden. Darüber hinaus sollen Diskussionen und Änderungen der Zulassungsrichtlinie für Schutzschichten im und durch den Fachbeirat vorgestellt werden. T2 - 19. Leipziger Deponiefachtagung CY - Leipzig, Germany DA - 14.03.2023 KW - Deponie KW - Kunststoffdichtungsbahn KW - Spannungsrissbeständigkeit PY - 2023 AN - OPUS4-57195 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian T1 - Strategien für die Nutzung von Schlacken zukünftiger wasserstoffbasierter Stahlproduktionsrouten – Herstellung von Stahlwerksschlacke basierten Ausgangsstoffen für die Zementindustrie N2 - Die Europäische Kommission präsentierte am 11. Dezember 2019 den European Green Deal, ein Konzept mit dem Ziel, bis zum Jahr 2050 als erster Kontinent Klimaneutralität zu erreichen. Mit Inkrafttreten der Verordnung (EU) 2021/1119 des Europäischen Parlaments und des Europäischen Rates am 29. Juli 2021 zur Schaffung des Rahmens für die Verwirklichung der Klimaneutralität („Europäisches Klimagesetz“), ist dieses, sowie das Ziel der Reduzierung der Nettotreibhausgasemissionen um mindestens 55 % bis 2030 in der Gesetzgebung der Europäischen Union verankert. Die Stahlindustrie in der Europäischen Union mit ca. 57 Mio. t Nettotreibhausgasemissionen im Jahr 2020, die annähernd 2 % der Emissionen der Europäischen Union ausmachen (Inklusive Energie: 127 Mio. t; 4 %), bekennt sich zur erheblichen Reduzierung der CO2-Emissionen bis zum Jahr 2030 und zum Erreichen der Klimaneutralität bis zum Jahr 2050. Als Schlüsselwege zur Verwirklichung dieser Zielstellung hat sie zum einen Smart Carbon Usage (SCU) und zum anderen Carbon Direct Avoidance (CDA) in einer Roadmap formuliert. SCU umfasst CO2-reduzierende Maßnahmen in bestehenden Eisen- und Stahlproduktionsprozessen, Carbon Capture and Storage- (CCS) sowie Carbon Capture and Usage-Technologien (CCU). Wohingegen bei CDA CO2-Emissionen durch erneuerbare elektrische Energie sowie wasserstoffbasierte Reduktion des Eisenerzes gar nicht erst entstehen sollen. Der CDA-Weg, der voraussichtlich beschritten werden muss, um eine klimaneutrale Stahlproduktion zu erreichen [38], geht mit einer kostenintensiven Transformation der Stahlproduktion einher, die bereits von vielen Unternehmen der Stahlindustrie eingeleitet wurde und von der im Wesentlichen die beiden in Europa vorherrschenden Stahlproduktionsrouten Hochofen-Konverter-Route und Elektrolichtbogenofen-Route betroffen sind. Die CO2-Emissionen der Hochofen-Konverter-Route, von denen der überwiegende Anteil auf den Hochofen fällt, liegen laut einer für das Jahr 2015 erstellten Studie bei 1921 kg CO2/t Rohstahl inklusive der CO2-Last der Pellets als Einsatzmaterial sowie der Emissionen der nachgelagerten Stranggießanlagen und Walzwerke. Im Hochofen wird das Eisenerz durch Kohlenstoff (C) bzw. Kohlenstoffmonoxid (CO) – welche größtenteils aus dem Koks, der dem Hochofen zusammen mit dem Möller über die Gicht zugeführten wird, stammen – unter Entstehung von Roheisen und Kohlenstoffdioxid (CO2) reduziert. Das neben dem CO2 im Prozessgas enthaltene CO wird zum Beispiel zur Energiegewinnung in peripheren Prozessen ebenfalls unter Bildung von CO2 verbrannt. Zusätzlich zur Reduktion hat der Koks unter anderem physikalische Aufgaben, wie die Errichtung eines Stützgerüstes und die Gewährleistung der Permeabilität im Hochofenprozess. Somit ist eine vollkommene Substitution des Kokses zur Vermeidung der CO2-Emissionen im Hochofen nicht denkbar. Viele Strategien der Stahlunternehmen zum Erreichen der Klimaziele verfolgen daher den Wechsel von der Rohstahlproduktion aus der Hochofen-Konverter-Route hin zur Rohstahlproduktion im Elektrolichtbogenofen (EAF – Electric Arc Furnace) mit dem Einsatz von direkt reduziertem Eisen (Eisenschwamm, DRI – Direct Reduced Iron) aus vorgelagerten Direktreduktionsanlagen, die mit Wasserstoff (H2) als Reduktionsmittel betrieben werden können. Dabei ist die Elektrostahlerzeugung kein neuer Prozess und nimmt in der europäischen Union bereits jetzt einen Anteil von ca. 44 % der Rohstahlproduktion ein, jedoch überwiegend mit Schrott als Einsatzmaterial. Bei der Elektrostahlerzeugung mit Schrotteinsatz fallen laut der oben genannten Studie von Lüngen für das Jahr 20152 410 kg CO2-Emissionen pro Tonne Rohstahl an, von denen der Großteil auf die CO2-Last der fremd bezogenen elektrischen Energie zurückzuführen ist und daher nicht im Produktionsprozess selbst entsteht. Auch die Direktreduktion wird schon seit 1972 in der weltweit zweiten und bis heute in Westeuropa einzigen Direktreduktionsanlage in Hamburg betrieben. Während hier noch mit einem Reduktionsgas gearbeitet wird, das hauptsächlich aus einem aus Erdgas gewonnenen Wasserstoff-Kohlenstoffmonoxid-Gemisch besteht, liegt eine aktuelle Kernherausforderung in der Bereitstellung des in der Größenordnung der von der Transformation betroffenen Rohstahlproduktionskapazitäten notwendigen, mit erneuerbarer elektrischer Energie hergestellten Wasserstoffs. Wird zusätzlich der Strom für das Einschmelzen im Elektrolichtbogenofen aus erneuerbaren Quellen gewonnen und werden schließlich als Brennstoff verwendete Kohle und als Brennstoff verwendetes Erdgas durch CO2-neutrale Bio-Brennstoffe ersetzt, sind sowohl für den Einsatz von mit Wasserstoff reduziertem und auf Pellets ohne CO2-Last basiertem Eisenschwamm als auch für den Einsatz von Schrott CO2-Emissionen von jeweils nur 60 kg CO2/t Rohstahl erreichbar, was eine Reduktion der Emissionen, ausgehend von der Konverter-Hochofen-Route um 97 % und ausgehend von der Schrott-Elektrolichtbogenofen-Route um 85 % bedeuten würde. Der Betrieb von Elektrolichtbogenöfen macht die an den Standorten vorhandenen Konverter sowie die Infrastruktur für Behandlung und Transport des Roheisens überflüssig. Die fortwährende Nutzung dieser bestehenden Anlagenstruktur dient daher unter anderem als Motivation für die Entwicklung einer zweiten Transformationsstrategie, die einen sogenannten Einschmelzer (SAF – Submerged Arc Furnace) als der Direktreduktionsanlage nachgelagerten Prozess vorsieht, in dem wiederum Roheisen erschmolzen wird, das anschließend im Konverter zu Rohstahl veredelt wird. Die Transformation der Stahlindustrie beeinflusst einen weiteren CO2-intensiven Industriesektor, nämlich die Zementindustrie die verantwortlich ist für rund 4 % der CO2-Emissionen in der EU. Etwa zwei Drittel dieser Emissionen entfallen als Prozessemissionen auf die Entsäuerung des Rohstoffs Kalkstein (CaCO3), also auf die Abspaltung von CO2 unter Entstehung des für die Herstellung von Zementklinker notwendigen Branntkalks (CaO) als Zwischenstufe bei der Bildung der hydraulischen Phasen Tri- und Dicalciumsilikat. Als eines der fünf Themenfelder (5C-Ansatz: Clinker, Cement, Concrete, Construction, Carbonation), welche die europäische Zementindustrie entlang ihrer Wertschöpfungskette zum Erreichen der gesetzlichen Vorgaben der europäischen Union erarbeitet hat, umfasst das Feld "Cement" zum größten Teil die Reduzierung des Klinker-Zement-Faktors. Im Jahr 2017 betrug er 77 %, das heißt, dass 23 % des Klinkers durch alternative Materialien ersetzt wurden. Bis zum Jahr 2030 wird ein Faktor von 74 % und bis zum Jahr 2050 von 65 % angestrebt. Den größten Anteil an den Klinkersubstituten hat mit 33 % der Hüttensand aus der Stahlindustrie. Bei der Roheisenproduktion im Hochofen entsteht als Nebenprodukt Hochofenschlacke, die unter Zugabe von Schlackebildnern die Gangart des Möllers und mineralische Koksbestandteile abbindet, sowie weitere unerwünschte Begleitelemente wie Schwefel und Alkalien aufnimmt. Allein in Deutschland wurden im Jahr 2021 6,90 Mio. t – das entspricht 90 % der gesamten produzierten Hochofenschlacke – zu glasig erstarrtem Hüttensand granuliert. Dieser Hüttensand besitzt latent hydraulische Eigenschaften und wird daher seit mehr als 140 Jahren als Zementbestandteil eingesetzt, wodurch in Deutschland jährlich rund 4,5 Mio. t CO2-Emissionen eingespart werden. Alle Transformationsstrategien der Stahlindustrie beinhalten die notwendige Außerbetriebnahme der CO2-intensiven Hochöfen. Dies hat unter anderem zur Folge, dass die Hochofenschlacke als Nebenprodukt der Rohstahlerzeugung im Hochofen nicht mehr zur Verfügung stehen wird, wodurch die weitere Reduzierung des Klinker-Zement-Faktors erhebliche Zusatzmengen alternativer Materialien benötigen wird. Derzeit ist noch unklar, ob z.B. calcinierte Tone im benötigten Umfang erzeugt werden können. Der Fachbereich Thermochemische Reststoffbehandlung und Wertstoffrückgewinnung der Bundesanstalt für Materialforschung und -prüfung (BAM) und das Institut für Baustoffforschung FEhS forschen zusammen mit Industriepartnern und weiteren Forschungseinrichtungen im Rahmen zweier Projekte in den Kooperationssphären der Stahl- und Zementindustrie, die zur Bewältigung dieser Herausforderungen beitragen. Im Projekt SlagCEM wird die Produktion eines hydraulischen Zementbestandteils durch Reduktion von Konverter- bzw. Linz-Donawitz-Schlacke (LDS) untersucht. Die mit den zusätzlich aufgenommen Lichtbogenofenkapazitäten steigenden Mengen an Elektrolichtbogenofenschlacke (EOS, engl. electric arc furnace slag, EAFS) werden im Projekt DRI-EOS behandelt, welches die Produktion eines latent hydraulischen Hüttensandsubstituts zum Ziel hat. T2 - Berliner Konferenz Mineralische Nebenprodukte und Abfälle CY - Berlin, Germany DA - 12.06.2023 KW - Stahlwerksschlacke KW - Zementersatz PY - 2023 AN - OPUS4-57683 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wöhlecke, Andreas T1 - Zum Spannungsrissverhalten von PE-HD Kunststoffdichtungsbahnen und zu aktuellen Themen aus dem Fachbeirat der BAM N2 - Kunststoffdichtungsbahnen (KDB) aus PE-HD (Polyethylen hoher Dichte) werden häufig zur Abdichtung von Bauwerken in der Geotechnik verwendet. Diese Produkte werden aus einem Kunststoff mit relativ komplexer Zusammensetzung hergestellt. Um eine Aussage über die Haltbarkeit von KDB aus PE-HD treffen zu können, muss das Materialverhalten berücksichtigt werden. In diesem Zusammenhang sind die wichtigsten Aspekte der Dauerhaftigkeit die Spannungsrissbeständigkeit und die Beständigkeit gegen Oxidation. Verschiedene PE-Sorten weisen eine unterschiedliche Spannungsrissbeständigkeit auf. Um dieser Eigenschaft von PE-HD zu begegnen, werden nur KDB aus sehr hochwertigen Rohstoffen zugelassen. Auf der anderen Seite werden hohe Anforderungen an die umgebenden Schichten, wie Auflager und Schutzschicht gestellt, um möglichst geringe Spannungen zu erzeugen und damit Dehnungen die Dehnungen der KDB gering zu halten. Bestimmte Medien, die bei den betreffenden Prüfungen verwendet werden, dürfen nicht mehr in der EU in Verkehr gebracht werden. Im Folgenden sollen die Zusammenhänge in Kürze dargestellt werden. Darüber hinaus sollen Diskussionen und Änderungen im Zusammenhang mit der Zulassungsrichtlinie für KDB vorgestellt werden. Der aktuelle Stand der Diskussion im Zusammenhang mit den verwendeten Tensiden in Bezug auf die Spannungsrissprüfung und weiterer Prüfungen wird aufgezeigt. Änderungen der Fremdprüfung von sogenannten Sandschutzmatten, des Standards zur Qualitätsüberwachung (SQÜ) von Kunststoff Dränelementen (KDE) und der Anpassung der Formulierungen zum Überbau der in Abdichtungen verwendeten Produkte werden in Kürze aufgezeigt. T2 - Karlsruher Deponie- und Altlastenseminar 2023 CY - Karlsruhe, Germany DA - 18.10.2023 KW - Deponie KW - Kunststoffdichtungsbahn KW - Spannungsrissbeständigkeit PY - 2023 AN - OPUS4-58634 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Development of a laboratory method to assess resistance development of microorganisms to biocides – An update N2 - This presentation describes our efforts at BAM towards the development of a laboratory method to assess resistance development of microorganisms to biocides. T2 - The International Biodeterioration Research Group (IBRG) spring meeting 2023 CY - Online meeting DA - 05.03.2023 KW - Antimicrobial resistance KW - Antimicrobial coating KW - Standardization KW - Biocides PY - 2023 AN - OPUS4-57858 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogel, Christian T1 - Analysis of fluorine/PFAS in battery black mass at HESEB N2 - Lithium iron phosphate (LiFePO4) batteries are a safe, cost-effective alternative to traditional lithium-ion batteries, but industrial-scale recycling is not yet available. The recycling process faces challenges, especially in purifying materials like lithium, phosphate, and iron, and managing fluorine contamination from fluoropolymers and salts (including PFAS). Fluorine K-edge XANES spectroscopy was used to analyze the chemical states of fluorine in the recycled materials for a safe reuse of elements and defluorination. T2 - SESAME – Germany Support and Networking Meeting CY - Hamburg, Germany DA - 30.06.2025 KW - Per- and polyfluoroalkyl substances (PFAS) KW - Battery PY - 2025 AN - OPUS4-63560 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herzel, Hannes T1 - Langzeitlagerung von Klärschlammaschen ab 2029? Erste Erfahrungen zur Phosphorrückgewinnung aus deponierten Klärschlammverbrennungsaschen N2 - Das Institut für Siedlungswasserwirtschaft (ISA) der RWTH Aachen University sowie die Bundesanstalt für Materialforschung und -prüfung (BAM) untersuchen gemeinsam fünf deponierte KSA, die von drei Deponiebetreibern ausgebaut und zur Verfügung gestellt wurden sind. Im Fokus der Untersuchungen stehen die physikalische und chemische Charakterisierung der deponierten KSA sowie deren P-Rückgewinnungspotenzial bei der Behandlung in thermochemischen sowie nasschemischen Verfahren. Diese Ergebnisse werden im Vergleich mit „frischen“, also nicht deponierten KSA-Proben vergleichbarer Herkunft bewertet, um so den Einfluss der Lagerung auf die KSA zu erfassen. T2 - 2. Branchendialog "Phosphor-Rückgewinnung aus Klärschlamm" CY - Online meeting DA - 10.10.2025 KW - Deponie KW - Langzeitlagerung KW - Phosphor KW - Klärschlammasche KW - Rückgewinnung PY - 2025 AN - OPUS4-64823 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute T1 - HistRCL- Vorstudie zur Identifikation und Einordnung von historischen Lehmbauteilen für die Wiederverwendung hinsichtlich der Anreicherung von Schadstoffen und bauschädlichen Salzen N2 - Lehm aus dem historischen Baubestand bietet ein hohes Potenzial für eine Wiederverwendung und die Schonung natürlicher Ressourcen. Anthropogene Einflüsse aus der Industrie der Region Mitteldeutschland und auch die Akkumulation von Schadstoffen durch spezifische Nutzungen sowie durch Feuchteeinfluss angereicherte bauschädliche Salze können einer Wiederverwendung entgegenstehen. Ziel des Projektes war daher die Überprüfung der Rezyklierbarkeit von Lehmbaustoffen aus historischen Bauten hinsichtlich der Umwelt- und Nutzerverträglichkeit. Dafür wurden exemplarisch Wellerlehmgebäude aus dem historischen Bestand mit einer potenziellen Belastung beprobt und untersucht. Die Ergebnisse liefern einen Beitrag, Unsicherheiten bei im Lehmbau tätigen Unternehmen hinsichtlich des sicheren Umganges mit möglichen stofflichen Belastungen abzubauen und diese bei der Einhaltung umweltrechtlicher und kreislaufgerechter Rahmenbedingungen bei der Wiederverwendung von Lehm aus dem historischen Bestand zu unterstützen. T2 - GOLEHM Innovationsforum CY - Halle (Saale), Germany DA - 26.07.2024 KW - Lehm KW - Wiederverwendung KW - Schadstoffe KW - Bauschädliche Salze PY - 2024 AN - OPUS4-61878 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wöhlecke, Andreas T1 - Aktuelles aus der Arbeit des BAM-Fachbeirats N2 - Der Fachbeirat kommt bereits seit 13 Jahren in seiner jetzigen Form zusammen, um Zulassungsrichtlinien, weitere Dokumente und fachliche Fragestellungen zu beraten. Die Zeit bringt auch personelle Veränderungen mit sich, darüber wollen wir berichten. Derzeit wird die Zulassungsrichtlinie für Schutzschichten im Fachbeirat und in seiner Arbeitsgruppe Geotextilien und Kunststoff Dränelemente (AG Geotextilien) überarbeitet. Zudem wurde die Zulassungsrichtlinie für Kunststoffdichtungsbahnen auf den aktuellen Stand der Regelsetzung und Normung gebracht. Bestimmte Medien, die hier bei einigen Prüfungen verwendet werden, dürfen nicht mehr in der EU in Verkehr gebracht werden. Hier werden die Hintergründe und Zusammenhänge in Kürze aufgezeigt. Zuletzt wird die Diskussion in Bezug auf den Einsatz von Rezyklaten in den zugelassenen Produkten aufgeführt. T2 - Karlsruher Deponie- und Altlastenseminar 2022 CY - Karlsruhe, Germany DA - 19.10.2022 KW - Deponie KW - Abdichtungssystem KW - Schutzschichten PY - 2022 AN - OPUS4-56210 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogel, Christian T1 - Per- and Polyfluoroalkyl Substances (PFAS): from analytical methods to thermal and mechanochemical treatment N2 - Per- and polyfluoroalkyl substances (PFAS) are a large group of more than 12,000 organofluorine surfactants. As a result of continuous and prolific use, mainly in aviation firefighting foams, thousands of industrial and military installations have been found to contain contaminated soil, groundwater and surface water. . Current decontamination strategies of PFAS-burdened soils mainly consist of adsorption methods using adsorbents for fixation of PFAS in the ground. A second option is the utilization of a “pump and treat” process, cycling polluted soils through a washing plant leading to the concentration of the pollutants in the fine fraction. Both approaches are cost-intensive and not intended for the direct decomposition of all PFAS contaminants. Furthermore, the contaminated adsorbants have to be safely thermal treated for recovery. Hence, there is a great demand for innovative developments, dealing with new strategies of tackling the PFAS problem. Previously, mechanochemical treatment of polychlorinated organic compounds in soils showed an efficient dechlorination. Thus, we investigated mechanochemical treatment of PFAS contaminated soils with various additives in a ball mill. T2 - Al-Balqa Applied University seminar CY - Al-Salt, Jordan DA - 23.02.2025 KW - Combustion Ion Chromatography KW - Per- and Polyfluoroalkyl substances (PFAS) KW - XANES spectroscopy KW - Thermal treatment KW - Remediation PY - 2025 AN - OPUS4-62617 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scholl, Juliane A1 - Meiers, Emelie T1 - Bestimmung von Trifluoressigsäure (TFA) in Acker- und Grünlandböden N2 - Aufgrund ihrer Persistenz, Mobilität und Toxizität haben per- und polyfluorierte Alkylverbindungen (PFAS) zunehmend an Aufmerksamkeit und Relevanz gewonnen. Mit der PFAS-Belastung von Umweltmatrices ist auch der Bedarf an analytischen Methoden gestiegen. Trifluoressigsäure (TFA) gehört als kürzeste perfluorierte Carbonsäure zur Gruppe der PFAS und gilt als emerging pollutant, dessen Gehalte in der Umwelt zukünftig eine stärkere Überwachung erfordern. Im Vortrag wird zunächst auf die Entwicklung einer sensitiven Analysenmethode zur Bestimmung von TFA in Böden mittels HPLC-MS/MS eingegangen. Anschließend werden die TFA-Ergebnisse von 100 ausgewählten Acker- und Grünlandproben aus Deutschland vorgestellt und diskutiert. T2 - PFAS-Länderaustausch – Erfassung und Erstbewertung PFAS-relevanter Flächen CY - Online meeting DA - 18.11.2024 KW - PFAS KW - LC-MS/MS KW - HILIC KW - TFA KW - Boden PY - 2024 AN - OPUS4-61684 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sichler, Theresa T1 - Ergebnisse des Vorhabens extraWERT N2 - Der Vortrag liefert eine Zusammenfassung der wichtigsten Ergebnisse des extraWERT-Vorhabens mit Schwerpunkt auf den Umsetzungsfragen zur Klärschlammverordnung. Bei diesen Punkten handelt es sich um die Untersuchung von monatlichen Phosphorschwankungen in kommunalem Klärschlamm und die Gleichwertigkeit verschiedener Verfahren zur Phosphorbestimmung in Klärschlamm. T2 - vgbe-Fachtagung Thermische Abfall-, Klärschlammbehandlung und Wirbelschichtfeuerungen 2022 CY - Hamburg, Germany DA - 09.05.2022 KW - Klärschlammverordnung KW - Phosphorrückgewinnung KW - Ringversuch PY - 2022 AN - OPUS4-54843 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herzel, Hannes T1 - Thermochemical P recycling from ash by AshDec ® process N2 - Klärschlammaschen können eine hohe Phosphatkonzentration aufweisen und stellen damit einen geeigneten Sekundärrohstoff für die Produktion von Phosphatdüngemitteln dar. Bisher wird dieses Potential der Klärschlammaschen für die Phosphor-Rückgewinnung jedoch kaum genutzt, da die in den Aschen enthaltenen Phosphate für Pflanzen kaum verfügbar und die Aschen teilweise mit toxischen Schwermetallen belastet sind. Im AshDec®-Verfahren wird die Klärschlammaschen im Drehrohrofen im Temperaturbereich 800-1000°C unter Zugabe von Alkali-Additiven (bsp. Na2CO3) thermochemisch behandelt, um ein wirksames und schadstoffarmes Phosphatdüngemittel herzustellen. Aktuell bereitet die Firma Emter GmbH den Bau der ersten großtechnischen AshDec®-Anlage mit einer Kapazität von 30.000 Jahrestonnen Klärschlammasche am Standort ihrer Klärschlammverbrennungsanlage (Altenstadt / Oberbayern) vor. Die erste Ausbaustufe dieser Anlage wird durch das BMBF-Projekt R-Rhenania im Rahmen der Förderinitiative RePhoR begleitet. T2 - Wastewater, Water and Resource Recovery (Workshop) CY - Online meeting DA - 11.04.2022 KW - Phosphorus recovery KW - Heavy metal removal KW - Ashdec PY - 2022 AN - OPUS4-54727 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schumacher, Julia T1 - Looking through the eyes of fungi: from photoperception to photoresponses and beyond N2 - Sunlight is an almost unavoidable environmental cue and plays a fundamental role in the biology of pro- and eukaryotic organisms. To cope with sunlight-associated stresses e.g., high temperatures, UV radiation, accumulation of reactive oxygen species, desiccation, and osmotic stress, it is important for organisms to accurately sense and respond to changes in light. The benefits of light are obvious for green organisms such as cyanobacteria, algae and plants which use light as an energy source (photosynthesis). Fungi that can share light-flooded habitats with phototrophs may profit from their excess photosynthetic products. Examples are the plant pathogen Botrytis cinerea, the gray mold fungus, and the rock inhabitant Knufia petricola, a microcolonial black fungus which forms multispecies biofilms with bacteria and algae. T2 - 20th Symposium of the Research Training Group on Bioactive Peptides – The colorful tree of life CY - Berlin, Germany DA - 23.01.2024 KW - Black fungi KW - Melanin KW - Stress tolerance PY - 2024 AN - OPUS4-59543 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schumacher, Julia T1 - How does light affect rock-inhabiting fungi? N2 - Sunlight is an almost unavoidable environmental cue and plays a fundamental role in the biology of pro- and eukaryotic organisms. To cope with sunlight-associated stresses e.g., high temperatures, UV radiation with associated DNA damage, accumulation of reactive oxygen species (ROS), desiccation and osmotic stresses, it is important for organisms to accurately sense and respond to changes in light. The benefits of light are obvious for green organisms such as cyanobacteria, algae and plants which use light as an energy source (photosynthesis). Less apparent are other light-dependent processes such as light-driven DNA repair by photolyases (photoreactivation) or ion pumping by microbial opsins. Fungi that can share light-flooded habitats with phototrophs may profit from their excess photosynthetic products. Rock-inhabiting Dothideomycetes and Eurotiomycetes including Knufia petricola possess many proteins for absorbing UV/blue, green, red and far-red light, produce the black 1,8 dihydroxynaphthalene (DHN) melanin and orange-red carotenoids, and may live in multispecies biofilms. Here, we are addressing the question to which extent constitutive pigment formation (melanin and carotenoids) and responses mediated by the stress-activated mitogen-activated protein (MAP) kinase contribute to the observed light (UV-B) tolerance of K. petricola. T2 - 32nd Fungal Genetics Conference CY - Pacific Grove, CA, USA DA - 12.03.2024 KW - Knufia petricola KW - Black fungi KW - Light-induced stress PY - 2024 AN - OPUS4-59732 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Aumont, Cédric T1 - Harnessing near-chromosome level quality genomes to explore the evolution of termite immunity N2 - The phylogeny of the Blattodea boasts a wide degree of sociality spanning from solitary cockroaches to advanced ecosystem-dominating higher termite societies. The emergence of sociality in termites was associated with the acquisition of a diverse range of social structures. Previous work has found evidence for a caste-specific social defence system in termites leading to an immune system that may favour group over individual defence. While preliminary work suggests a correlation between social transitions and a reduction of immune gene family diversity, the lack of available high-quality termite genomes hampers complete knowledge of the true diversity of immune gene evolution across termite phylogeny. Here, we report on the sequencing and near-chromosome level assembly of 48 high-quality long-read-based genomes across major termite and cockroach sister-branch lineages. We investigate the diversity and evolutionary history of immune genes across genomes, focusing particular attention on correlations between immune gene evolution and transitions in sociality over termite phylogeny. T2 - Royal Entomological Society Annual Meeting - Ento23 CY - University of Exeter, Falmouth, UK DA - 05.09.2023 KW - Immune gene family KW - Termite phylogeny KW - Eusociality KW - Group defence PY - 2023 AN - OPUS4-58296 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - McMahon, Dino Peter T1 - Evolutionary genomics of termite sociality N2 - Termite sociality is thought to have evolved around 150 million years ago and is therefore ancient. Reconstructing the transitions that led to the evolution of this group of ecologically dominant insect societies is challenging. We sought to address this by sequencing near-chromosome-quality genomes from the major solitary, subsocial and social lineages of termites and their nearest blattodean relatives. We present findings from a comparative analysis of the sequenced genomes, where we explore the molecular underpinnings of termite sociality, and seek to understand the evolutionary origins of termite castes. At a broader scale, we test the extent to which a two-step process involving an initial expansion of genomic elements in cockroaches followed by extensive genome rearrangements in termites, may have acted as an important mechanism of evolutionary change. We then ask whether specific genomic processes may have facilitated evolutionary novelty, for example, through the analysis of transposon-host gene associations across the social gradient. We also report on findings that combine genomes with brain transcriptomics to explore the mechanistic basis of termite phenotypic plasticity, thereby enabling a first large-scale comparative genomic analysis of the evolutionary origins of termite sociality. T2 - International Congress of Entomology (ICE) 2024 CY - Kyoto, Japan DA - 25.08.2024 KW - Termite KW - Reference genome KW - Genomics PY - 2024 AN - OPUS4-61648 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Einführung in die Mantelverordnung - Stand der Bundes-Bodenschutz- und Altlastenverordnung N2 - Einführung in die Mantelverordnung Stand der Bundes-Bodenschutz- und Altlastenverordnung, aktuelles zum Aufbau der MVO und zum Stand Anfang 2023 T2 - X. Baustoffseminar - Aktuelles zu Gesteinskörnungen CY - Bad Berka, Germany DA - 17.01.2023 KW - Mantelverordnung KW - Gesteinskörnungen KW - Wiederverwertung PY - 2023 AN - OPUS4-57798 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meermann, Björn T1 - Element analytical approaches for emerging contaminant analysis-materials meet environment N2 - Im Rahmen des Vortrags wurden Elementanalytische Methoden auf Basis der ICP-MS und HR-CS-GFMAS im Kontext der Material-Umweltanalytik in Form eines Übersichtsvortrags vorgestellt. Neben den Techniken wurden diverse Applikationsbeispiele für unterschiedliche Umweltmatrizes genannt. T2 - ANAKON 2025 CY - Leipzig, Germany DA - 10.03.2025 KW - ICP-MS KW - Emerging contaminants KW - Evironment PY - 2025 AN - OPUS4-65126 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meermann, Björn T1 - Approaches for PFAS Sum-Parameter Analysis - from Materials to Environment N2 - Im Rahmen des Vortags wurden PFAS Analysemethoden auf Basis der optischen Spektroskopie (HR-CS-GFMAS) vorgestellt. Anhand ausgewählter Applikationsbeispiele wurde die Leistungsfähigkeit der Methode dargelegt. Beispiele waren dabei u.a. aus dem Bereich Oberflächenwasseranalytik, Pflanzen und Böden. T2 - Industrie Anwenderseminar PFAS 2025 CY - Online meeting DA - 30.06.2025 KW - PFAS KW - HR-CS-GFMAS KW - Summenparameter PY - 2025 AN - OPUS4-65125 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gluth, Gregor T1 - Microbially induced corrosion of cementitious materials in sewer systems N2 - Sewer networks (also called wastewater systems) include structures to collect and transport wastewater to disposal or treatment in dedicated facilities. These networks are essential infrastructures of our societies, and the size of these systems in terms of length as well as asset value is usually vast. Accordingly, the annual rehabilitation and replacement costs for sewer networks are very high in many countries. In addition, failures of wastewater systems can cause severe health and environmental problems, making the durability of these infrastructures an issue of crucial societal importance. A substantial fraction of the deterioration of sewers is caused by microbially influenced corrosion (MIC) of concrete structures in the networks, and, thus, understanding the causes of this process is crucial to be able to effectively direct resources for rehabilitation, replacement and construction of sewer systems. Because of the importance of the problem, it has been studied for many decades, and significant progress has been made during this time. In recent years, answers to several previously underexplored questions, for example regarding the validity of the different test methods to assess the resistance of cementitious materials against MIC and the suitability of new cementitious materials for sewer repair, have begun to emerge. The present contribution gives an overview over the processes involved in MIC of cementitious materials in sewers, and reviews recent findings concerning the resistance of cementitious materials against MIC. The data indicate that alkali-activated materials can exhibit exceptionally high resistance against MIC, while it is presently not fully understood which mix design parameters deter¬mine this resistance. Disagreement exists in the literature regarding the causes of the generally high resistance of calcium aluminate cements. Significant progress has been made in determining the deterioration rate of cementitious materials under strongly corroding conditions, but well-founded approaches to classify the severity of MIC attack in sewers seem not to be available at present. T2 - MICxUS 2025 – Symposium on Microbiologically Influenced Corrosion (MIC) in Industrial and Utility Systems CY - Nicosia, Cyprus DA - 21.01.2025 KW - MIC KW - Cement KW - Repair mortar KW - Sulfuric acid KW - Sewers PY - 2025 AN - OPUS4-62738 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marano, Roberto T1 - Antimicrobial coatings: modes of action, microbiological efficacy testing, and resistance evolution N2 - Antimicrobial coatings and materials on high touch surfaces can provide additional level of protection to periodic disinfection cycles by reducing bacterial loads. However, different coatings and materials assert their antimicrobial activity in different ways, and it is not clear whether they could pose detrimental selective pressure towards antibiotic-resistant bacteria. This talk elucidates modes of actions and current knowledge gaps in testing antimicrobial resistance on antimicrobial surfaces.” T2 - STOP Antimicrobial Coating Conference CY - Mons, Belgium DA - 05.12.2024 KW - Antimicrobial-resistance KW - Surface antimicrobial testing KW - Materials testing PY - 2025 AN - OPUS4-64566 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marano, Roberto T1 - A Customizable Procedure for Predicting Antibiotic Resistance Selection on Novel Antimicrobial Coatings N2 - This presentation introduceda new methodological approach developed to test antimocrobials implemented on high touch surfaces, inlcuding preliminary results on its use on reference antimicrobial materials. The seminar was organized by the 'Fast-real' project, funded by the Horizon Europe (project ID: 101159721). T2 - Novel strategies and considerations in fighting pathogens CY - Tartu, Estonia DA - 16.06.2025 KW - Antimicrobial-resistance KW - Surface antimicrobial testing KW - Materials testing PY - 2025 AN - OPUS4-64568 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Resistance evolution towards biocides and antimicrobial surfaces N2 - Biocides, including disinfectants and antimicrobial surfaces (AMCs), are important to prevent the spread of pathogens and antimicrobial resistant bacteria via surfaces. However, concerns have been raised about the evolution and selection of resistance against disinfectants and AMCs. In turn, resistance against disinfectants and AMCs can be associated to antibiotic resistance due to cross-resistance and co-resistance. We need to understand the mechanisms and risks of disinfectants and AMCs for resistance and cross-resistance evolution to optimize their application and safeguard their long-term efficacy. We used adaptive laboratory evolution (ALE) experiments based on repeated exposure of bacteria to disinfectants. Our results show that repeated disinfection of E. coli with benzalkonium chloride in suspension results in a 2000-fold increase in survival within 5 exposure cycles. Adaption is linked to the initial presence of persister cells highly tolerant to benzalkonium chloride. We used the same approach to develop standardizable ALE experiments to determine resistance evolution to AMCs. The results highlight rapid adaptation of E. coli and P. aeruginosa towards copper surfaces. Moreover, there are multiple situations in the clinic or in the environment in which biocides and antibiotics co-occur and in which combination effects can shape their antimicrobial activity or their selective effects. Our work with P. aeruginosa shows prevalent combination effects of biocides and antibiotics, ranging from synergy to antagonism and resulting in the selection for or against antibiotic resistant strains. The combination effects are dependent on the biofilm mode-of-growth, manifesting in apparent differences in the structural arrangement of antibiotic sensitive and resistant strains in biofilms exposed to combinations. Furthermore, biocides affect rates of mutation and horizontal gene transfer, thereby having a potential facilitating effect on resistance evolution. Taken together, our work shows that the role of biocides as potential drivers of resistance evolution and selection deserves further study and regulative action. T2 - Eurobiofilms 2022 CY - Palma, Spain DA - 31.08.2022 KW - Antimicrobial resistance KW - Bacteria KW - Biofilms KW - Biocides KW - Antimicrobial surfaces PY - 2022 AN - OPUS4-55608 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Biocides as drivers for the Selection and evolution of antimicrobial resistance N2 - Antimicrobial resistance (AMR) is a global health problem with the environment being an important compartment for the evolution, selection and transmission of AMR. These processes are impacted by pollution with antibiotics. However, antimicrobial biocides used as disinfectants and material preservatives are major pollutants exceeding the antibiotic market in terms of chemical diversity and mass. The aim of our work is to understand the mechanisms and risks of biocides for resistance and antibiotic cross-resistance evolution in bacteria to optimize their application and safeguard their efficacy. We use adaptive laboratory evolution experiments, phenotypic characterization, single-cell analysis, whole genome sequencing, and competition experiments to investigate AMR evolution and selection of the model organism E. coli in the presence of biocides. Our work shows that biocides have the potential to affect evolutionary processes towards AMR by increasing the rates of de-novo mutation and conjugation. Importantly, widely used compounds such as chlorhexidine and quaternary ammonium compounds (QACs) affect rates of mutation and conjugation at environmentally relevant concentrations. Furthermore, we show that single-cell phenotypic heterogeneity regarding tolerance (persistence) determines survival against specific biocides including QACs and isopropanol. Mechanistic investigations reveal that known antibiotic persister mechanisms contribute to persister formation to biocides. The evolution of high-level tolerance to different biocides is linked to the initial persister level and the evolution of specific genetically encoded mechanisms related to properties of the cell envelope. Biocide-tolerant strains have a selective advantage in the presence of environmentally-relevant concentrations of antibiotics, which could lead to the stabilization of biocide tolerance in environments where biocides and antibiotics co-occur (e.g. wastewater, animal stables). Taken together, our work shows the importance of assessing the contribution of biocides on evolution and selection of AMR in the environment. T2 - 10th Symposium on Antimicrobial Resistance in Animals and the Environment (ARAE) CY - Berlin, Germany DA - 30.06.2025 KW - Antimicrobial surfaces KW - Biocides KW - Antimicrobial resistance KW - Standardization PY - 2025 AN - OPUS4-64869 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Resistance evolution to antimicrobial biocides N2 - This talk discusses resistance evolution to antimicrobial biocides. It shows (i) that biocides show heterogeneous killing facilitating tolerance evolution, (ii) that serial transfer at subinhibitory concentrations is not appropriate to model evolutionary adaptation to disinfection, (iii) that biocides affect rates of mutation and horizontal gene transfer Biocides, and (iv) that antibiotics show strong combination effects. T2 - Evolutionary Biology meets the Antibiotic Crisis vol. 2 CY - Plön, Germany DA - 24.09.2024 KW - Antimicrobial resistance KW - Bacteria KW - Standardization KW - Biocides PY - 2024 AN - OPUS4-61545 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Dr. Frank Schreiber and Work on Biocide Resistance at BAM N2 - This talk details the career path of Dr. Frank Schreiber and his work on biocide resistance at BAM. Biocides are antimicrobial products for defined applications (disinfectants, preservatives, pest control). Biocides show heterogeneous killing facilitating resistance/tolerance evolution. Adaptation to biocides has effects on growth and selection. T2 - Vortrag an der Berliner Hochschule für Technik CY - Berlin, Gemany DA - 07.06.2024 KW - Antimicrobial resistance KW - Bacteria KW - Standardization KW - Biocides PY - 2024 AN - OPUS4-61543 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Beyond Antibiotics – Biocides as Drivers of Environmental AMR N2 - This presentation provides an overview about how biocides drive the evolution of antimicrobial resistance during application and as pollutants in the environment. It also discusses the contribution of biocides for the environmental transmission of AMR. T2 - OneBridge: Making environmental AMR Surveillance Fit for Purpose: Data Integration and the Ecology of Resistance CY - Dresden, Germany DA - 06.10.205 KW - Antimicrobial surfaces KW - Biocides KW - Antimicrobial resistance KW - Standardization PY - 2025 AN - OPUS4-64872 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Resistance evolution towards biocides and antimicrobial surfaces N2 - This presentation describes our work at BAM on resistance evolution towards biocides and antimicrobial surfaces. T2 - Break biofilms workshop CY - Vienna, Austria DA - 16.01.2023 KW - Antimicrobial resistance KW - Bacteria KW - Biofilms KW - Biocides PY - 2023 AN - OPUS4-57857 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - BIOCIDE N2 - This presentation gives an overview about the BIOCIDE project performed with the Aquatic Pollutants joint call. T2 - Aquatic Pollutants TransNet workshop CY - Online meeting DA - 09.11.2022 KW - Antimicrobial resistance KW - Bacteria KW - Biofilms KW - Biocides KW - Risk assessment KW - Wastewater PY - 2022 AN - OPUS4-56265 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koerdt, Andrea T1 - Hydrogen storage & Microbiologically influenced corrosion - Improved test system for Stability and Durability of the Materials & Gas N2 - Underground hydrogen storage (UHS) is a strategic step towards implementing the hydrogen economy. Achieving the required infrastructure by 2050 necessitates advancements in hydrogen-dedicated assets and the evaluation of existing infrastructure. The unique conditions in UHS require an experimental set-up to simulate UHS operating conditions, which allows to assess the readiness of current storage and transmission for hydrogen, and develop new technologies for material-resistance, operational-simulations, and risk-assessments. In addition to the physical/chemical conditions in UHS (e.g., salinity, hydrogen concentration, operating temperature/-pressure, water content), biological threats must also be considered. Therefore, we present here a high-pressure-set-up, developed for research/-industrial testing purposes. Currently, UHS-experiments for microbiologically-influenced-corrosion (MIC) are performed in standard autoclaves with relatively high volumes/pressures; they were primarily designed for material-specific investigations. While these methods provided some useful information for biological questions, they had significant limitations. Besides, the rapid depressurization that occurs with standard autoclaves can greatly affect materials, especially amorphous materials like polymers, causing damage that isn't due to the actual hydrogen storage. This presents a challenge, as the test results may not accurately reflect real-world conditions. To address these issues, specialized autoclaves have been developed to allow for slower depressurization while also enabling continuous monitoring of gases and liquids during the experiment. Such modifications could help obtain more accurate and reliable data. The novel UHS-simulation-set-up presented here is designed with a controlled independently temperature and pressure. Field samples can be used to mimic geology, water chemistry, construction materials, and microbiological conditions. Most significant advantages of the set-up are: 1. It allows for liquid addition during the test, enabling the study of biocides or the evaluation of operating setups. 2. It permits liquid/-gas sampling during the test, allowing for more efficient monitoring of testing conditions and a better understanding of the process over time. Additionally, a low-release function is added, which is particularly important for studying MIC to avoid negative side effects, on the material (e.g. polymers/corrosion product-layer/cells itself) which might occur due to the fast pressure release. T2 - MATHEA | MATerials in Hydrogen related Energy Applications 2025 CY - Hamburg, Germany DA - 24.06.2025 KW - MIC KW - MISTRAL KW - Underground storage KW - Hydrogen KW - Polymer KW - Metal PY - 2025 AN - OPUS4-63567 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Resistenzen von Bakterien gegen Biozide – Evolution, Mechanismen und Methoden N2 - Diese Präsentation gibt einen Überblick über die Aktivitäten zum Thema Biozidresistenz an der BAM. T2 - Life Science Nord - Online-Update Hygiene und Infektionsprävention CY - Online meeting DA - 14.06.2022 KW - Antimikrobielle Resistenz KW - Antmikrobielle Oberflächen KW - Standardisierung KW - Biozide KW - Risikobewertung PY - 2022 UR - https://vimeo.com/722198443 AN - OPUS4-56236 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Resistance evolution towards biocides and antimicrobial surfaces N2 - This talk discusses resistance evolution towards biocides and antimicrobial surfaces. It shows (i) that biocides affect rates of mutation and horizontal gene transfer, (ii) that biocides show heterogeneous killing facilitating tolerance evolution, and (iii) that biocides and antibiotics show strong combination effect on growth and selection. T2 - STOP project internal seminar CY - Online meeting DA - 24.04.2024 KW - Antimicrobial resistance KW - Bacteria KW - Standardization KW - Biocides KW - Antimicrobial surfaces PY - 2024 AN - OPUS4-61546 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Risk Assessment of Biocide Resistance N2 - This presentation details approaches for the risk assessment of biocide resistance. Different methods are presented to acquire the necessary data for such risk assessments. T2 - OECD, 7th Meeting of the Working Party on Biocides CY - Leiden, Netherlands DA - 18.09.2023 KW - Antimicrobial resistance KW - Bacteria KW - Standardization KW - Biocides PY - 2023 AN - OPUS4-59062 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Bakterielle Resistenzen und Toleranzen gegen Desinfektionsmittel und antimikrobielle Oberflächen N2 - Dieser Vortrag beschreibt die Entstehung von bakteriellen Resistenzen und Toleranzen gegen Desinfektionsmittel und antimikrobielle Oberflächen. T2 - Fachtagung für Krankenhaushygiene der Deutschen Gesellschaft für Krankenhaushygiene CY - Essen, Germany DA - 12.05.2023 KW - Antimikrobielle Resistenz KW - Antmikrobielle Oberflächen KW - Standardisierung KW - Biozide PY - 2023 AN - OPUS4-57860 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Resistance evolution towards biocides and antimicrobial surfaces N2 - This talk discusses the work at BAM concerning Resistance evolution towards biocides and antimicrobial surfaces. It shows (i) that biocides affect rates of mutation and horizontal gene transfer, (ii) that biocides show heterogeneous killing facilitating tolerance evolution, and (iii) that biocides and antibiotics show strong combination effect on growth and selection. T2 - Exchange seminar with Nottingham Trent University CY - Berlin, Germany DA - 03.09.2024 KW - Antimicrobial resistance KW - Bacteria KW - Standardization KW - Biocides KW - Antimicrobial surfaces PY - 2024 AN - OPUS4-61548 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nordholt, Niclas T1 - Phenotypic heterogeneity in disinfection: sources and consequences for antimicrobial resistance N2 - A summary of projects here at BAM which investigate the influence of phenotypic heterogeneity on the outcome of disinfection and the influence on antimicrobial resistance. This presentation was given in the Theory Seminar of the Quantitative and Theoretical Biology group of Prof. Oliver Ebenhöh at HHU Düsseldorf T2 - Theory Seminar in the Quantitative and Theoretical Biology group at HHU Düsseldorf CY - Düsseldorf, Germany DA - 24.02.2022 KW - Disinfection KW - Biocides KW - Heterogeneity KW - Resistance PY - 2022 AN - OPUS4-54442 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. T1 - Seminar on Smelling Drones – Part 2: Design and Experimental Study of an Nano Aerial Robot for ARO Applications N2 - This seminar series comprises three lectures on drones and ground robots capable of sensing chemical substances and two accompanying hands-on workshops on nano drones equipped with chemical sensors. In the first lecture, Dr. Neumann will talk on a summary of aerial robot olfaction and his research. In the second and third lectures, more details of the nano drones equipped with chemical sensors will be provided, and the participants can get hands on experience of the nano drones in the accompanying workshops. The lectures will be given in English. This seminar series is supported by FY2023 Researcher Exchanges Program in UEC. T2 - Seminar Series on Smelling Drones CY - Tokyo, Japan DA - 28.11.2023 KW - Mobile robotic olfaction KW - Nano aerial robot KW - Gas source localization KW - Setup and Validation KW - Gas distribution mapping PY - 2023 AN - OPUS4-59130 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weller, Michael G. T1 - Drone-Based Localization of Hazardous Chemicals by Passive Smart Dust N2 - Rapid detection and localization of hazardous chemicals is crucial for environmental monitoring, occupational safety, and emergency response. This study presents a novel approach that combines drone technology with passive smart dust – biodegradable, paper-based chemical sensors – to remotely identify and map hazardous substances. In contrast to conventional smart dust concepts based on electronic microsensors with significant limitations in power supply, cost and environmental impact, this method uses cellulose-based, confetti-like sensors impregnated with colorimetric or fluorescent indicators. These sensors change color in response to chemical exposure, enabling simple optical detection from a distance. A drone equipped with a conventional digital camera takes pictures of the deployed sensors, which are then analyzed by automated image processing. The system converts images from the red-green-blue color model (RGB) into hue-saturation-value space (HSV) and applies threshold filters and clustering algorithms to increase the accuracy of identifying hazardous zones. Field tests using thymol blue as a pH-sensitive indicator have successfully demonstrated the system's ability to detect and locate acid spills in an outdoor environment. The results confirmed that low-cost, off-the-shelf drones can effectively monitor affected areas by providing real-time data for responders while minimizing human exposure to hazardous chemicals. This approach offers a fast, scalable, cost-effective and environmentally friendly alternative to conventional hazard detection technologies. Other important advantages are the close proximity of the sensors to the contamination, the avoidance of downwash problems by the drone propellers and the generation of a dense mesh of data points. Since no complex electronic sensors are required and simple, biodegradable materials are used, the system is well suited for large-scale deployment in industrial accidents, environmental pollution and chemical disaster scenarios. Future research will investigate additional chemical indicators to expand detection capabilities, optimize sensor deployment, and refine data processing for greater accuracy. The passive smart dust system represents a new concept in remote chemical hazard monitoring and may have broad implications for accident response, environmental crime, facility security, and attacks with chemical weapons. N2 - Die schnelle Erkennung und Lokalisierung gefährlicher Chemikalien ist für die Umweltüberwachung, den Arbeitsschutz und den Katastrophenschutz von entscheidender Bedeutung. Diese Studie stellt einen neuartigen Ansatz vor, der Drohnen-Technologie mit Passivem Smart Dust – biologisch abbaubaren, papierbasierten chemischen Sensoren – kombiniert, um gefährliche Substanzen aus der Ferne zu identifizieren und zu kartieren. Im Gegensatz zu herkömmlichen Smart-Dust-Konzepten, die auf elektronischen Mikrosensoren mit erheblichen Einschränkungen bei der Stromversorgung, den Kosten und der Umweltbelastung basieren, verwendet diese Methode zellulosebasierte, konfetti-artige Sensoren, die mit kolorimetrischen oder fluoreszierenden Indikatoren imprägniert sind. Diese Sensoren ändern ihre Farbe bei Kontakt mit Chemikalien, sodass eine einfache optische Erkennung aus der Ferne möglich ist. Eine Drohne, die mit einer herkömmlichen Digitalkamera ausgestattet ist, nimmt Bilder der eingesetzten Sensoren auf, die dann durch automatisierte Bildverarbeitung analysiert werden. Das System konvertiert Bilder vom Rot-Grün-Blau-Farbmodell (RGB) in den Farbton-Sättigungs-Wert-Raum (HSV) und wendet Schwellenwertfilter und Clustering-Algorithmen an, um die Genauigkeit bei der Identifizierung gefährlicher Zonen zu erhöhen. Feldtests mit Thymolblau als pH-empfindlichem Indikator haben erfolgreich die Fähigkeit des Systems nachgewiesen, ausgelaufene Säure in Außenbereichen zu erkennen und zu lokalisieren. Die Ergebnisse bestätigen, dass kostengünstige, handelsübliche Drohnen betroffene Bereiche effektiv überwachen können, indem sie Einsatzkräften Echtzeitdaten liefern und gleichzeitig die Exposition von Menschen gegenüber gefährlichen Chemikalien minimieren. Dieser Ansatz bietet eine schnelle, skalierbare, kostengünstige und umweltfreundliche Alternative zu herkömmlichen Technologien zur Gefahrenerkennung. Weitere wichtige Vorteile sind die räumliche Nähe der Sensoren zur Kontamination, die Vermeidung von Abwindproblemen durch die Drohnenpropeller und die Erzeugung eines dichten Netzes von Datenpunkten. Da keine komplexen elektronischen Sensoren erforderlich sind und einfache, biologisch abbaubare Materialien verwendet werden, eignet sich das System gut für den großflächigen Einsatz bei Industrieunfällen, Umweltverschmutzung und chemischen Katastrophenszenarien. In zukünftigen Forschungsarbeiten sollen weitere chemische Indikatoren untersucht werden, um die Erkennungsmöglichkeiten zu erweitern, den Sensoreinsatz zu optimieren und die Datenverarbeitung für eine höhere Genauigkeit zu verfeinern. Das passive Smart-Dust-System stellt ein neues Konzept für die Fernüberwachung chemischer Gefahren dar und könnte weitreichende Auswirkungen auf die Unfallbekämpfung, Umweltkriminalität, Anlagensicherheit und Angriffe mit Chemiewaffen haben. T2 - 39th Session of the Scientific Advisory Board of the OPCW CY - The Hague, Netherlands DA - 01.04.2025 KW - Imaging KW - Remote Sensing KW - Chemosensors KW - Organization for the Prohibition of Chemical Weapons (OPCW) KW - CBRN Defence PY - 2025 AN - OPUS4-62897 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Wessen Problem ist Mikroplastik eigentlich? N2 - In den letzten 20 Jahren ist die Aufmerksamkeit vieler Forschender sowie der Politik und der Bürger selbst auf ein wachsendes Kunststoffproblem unserer Zeit stark gestiegen. Mangelnde Wertstoffkonzepte, Sammelstellen und unbedachtes Einbringen von Kunststoffprodukten in die Umwelt führen dort zu einer Anreicherung. Durch äußere Witterungseinflüsse können diese Produkte degradieren und fraktionieren, so dass heute in allen Teilen der Welt Mikroplastik (1-1000 µm, ISO/TR 21960:2020) unterschiedlicher Polymermaterialien nachgewiesen werden kann. Bei Mikroplastik gilt das Vorsorgeprinzip. Die Partikel können weiter zerfallen in Nanoplastik (< 1 µm, ISO/TR 21960:2020). Ob eine toxikologische Gefährdung von Mikro- oder Nanoplastik ausgeht, wird vielfältig untersucht. Bisher stehen valide Ergebnisse aus. Untersuchungen zur Häufigkeit, dem Transport und möglicher Senken und Eintragspfade muss aber Rechenschafft getragen werden, so dass ein Monitoring von Mikroplastik bereits in der Revision der Trinkwasserrahmen-Richtlinie und der Abwasserrahmen-Richtlinie gefordert wird. Bedenklich ist auch die Verordnung über Mindestanforderungen an die Wasserwiederverwendung (2020/741), in welcher nicht verbindlich gesagt wird, Wasser welcher Reinigungsstufe eines Klärwerks auf die Felder zur Wiederverwendung aufgebracht werden darf. Einer Regulierung über die EU-Plastikstrategie hinaus mit z.B. Verboten für Einwegplastik-Produkte und Rezyklingquoten kann nur entgegengewirkt werden, wenn valide Messmethoden, Referenzmaterialien und Standards existieren, die das tatsächliche Ausmaß von Mikroplastik-Konzentrationen in Luft, Wasser, Boden und Biota zuverlässig und genau aufzeigen. T2 - Technomer CY - Chemnitz, Germany DA - 06.11.2025 KW - Mikroplastik KW - Referenzmaterial KW - TED-GC/MS PY - 2025 AN - OPUS4-64618 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Textile Fibers as Reference Materials for Microplastic Release N2 - Fibers of textile origin are named as high contributor for microplastic pollution in the environment next to e.g. plastics from packaging, tire wear and paints. Small fibers and fragments (microplastics: 1-1000 µm) can be released from textiles by mechanical abrasion during application (e.g. wearing) or washing. To date, the occurrence, transport pathways, and impacts of such small fibers on the environment and human health remain unclear. The European Commission revised the Urban Wastewater Treatment Directive (Directive (EU) 2024/3019) and made monitoring of microplastics mandatory in the next years. Additionally, standards for microplastic detection are developed in the ISO standardization body ISO/TC 147/SC 2 with the documents ISO/DIS 16094-2 and ISO/DIS 16094-3. Detection mainly occurs by thermoanalytical methods for mass or vibrational methods with microscopes for numbers. Such standards and regulatory efforts need validated methods, which themselves need reference materials for validation. Reference materials are well characterized materials that are produced for a specific purpose and are homogeneous and stable within one property of interest. The shape and the composition of the reference particles/fibers will affect the detection, hence it is important to validate the instruments with fibers, if this is the task for monitoring campaigns. This work describes the production of realistic fibers as reference material for microplastic analysis. The individual samples contain of a small number (< 1000) and mass (< 20 µm) of fibres. Homogeneity and stability control occurred by thermogravimetric analysis and µ-Raman. Further characteristics were determined for type, shape and size distribution. T2 - TEXTEH CY - Bucharest, Romania DA - 23.10.2025 KW - Microplastics KW - Reference materials KW - Microfibers KW - Microfiber release PY - 2025 AN - OPUS4-64620 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kittner, Maria T1 - Bewertung der Freisetzung von Mikroplastik aus Sportböden auf Kunststoffbasis N2 - Es handelt sich hierbei um die Abschluss-Präsentation des Projektes "Bewertung der Freisetzung von Mikroplastik aus Sportböden auf Kunststoffbasis", die am 28.11.24 vor dem Drittmittelgeber Zukunft Bau Forschungsförderung im Rahmen der 28. Projekttage der Bauforschung präsentiert wurde. Der 30-minütige Vortrag gliederte sich in die Kapitel Forschungsbedarf, Konzept, Ergebnisse und Take Home-Messages des Projektes. T2 - 28. Projekttage der Zukunft Bau Forschungsförderung CY - Online meeting DA - 26.11.2024 KW - Mikroplastik KW - TED-GC/MS KW - Kunststoffrasen KW - PAK KW - Schwermetalle KW - Mikroplastik Eluat Lysimeter PY - 2024 AN - OPUS4-61815 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kittner, Maria T1 - Bewertung der Freisetzung von Mikroplastik aus Sportböden auf Kunststoffbasis N2 - Projektvorstellung "Bewertung der Freisetzung von Mikroplastik aus Sportböden auf Kunststoffbasis": Motivation, Konzept, Umsetzung, erste analytische Ergebnisse der TED-GC/MS T2 - 24. Projekttage der Zukunft Bau Forschungsförderung CY - Bonn, Germany DA - 13.06.2023 KW - Mikroplastik KW - TED-GC/MS KW - Kunststoffrasen KW - Lysimeter KW - Beschleunigte Alterung PY - 2023 AN - OPUS4-58441 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kittner, Maria T1 - Bewertung der Freisetzung von Mikroplastik aus Sportböden auf Kunststoffbasis N2 - Projektvorstellung "Bewertung der Freisetzung von Mikroplastik aus Sportböden auf Kunststoffbasis": Konzept, Umsetzung, erste Mikroplastik-Ergebnisse. T2 - Projektbegleitkreissitzung des Projektes "Ermittlung und Minderung von Mikroplastik- und Schadstoffemissionen von Kunststoffrasen-Sportplätzen (MiMiK)“ CY - Sittensen, Germany DA - 25.09.2023 KW - Mikroplastik KW - TED-GC/MS KW - Kunststoffrasen KW - Lysimeter KW - Beschleunigte Alterung PY - 2023 AN - OPUS4-58442 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herzel, Hannes T1 - Thermochemische P-Rückgewinnungsverfahren in Deutschland zur Düngerproduktion N2 - Die Firma Emter GmbH betreibt die Klärschlammverbrennungsanlage Altenstadt und hat in die bestehende Monoverbrennung einen thermochemischen Prozess integriert, um hochwirksame und schadstoffarme Düngemittel aus Klärschlamm herzustellen. Die Anlage ist aktuell die größte Phosphorrecyclinganlage in Deutschland mit der die Vorgaben der AbfKlärV bereits frühzeitig umgesetzt werden. Das Projekt R-Rhenania begleitet die Phosphorrecyclinganlage mit Untersuchungen zur Produktqualität, mit Gefäßversuchen und Feldversuchen im ökologischen Landbau, mit Ökobilanzierung und der Konfektionierung verschiedener Düngemittelprodukte. Viele Klärschlammaschen haben geringe Schwermetallgehalte und sind geeignet durch vergleiche thermochemische Prozesse behandelt zu werden. Mit den Daten aus dem Klärschlammasche-Monitoring der BAM können die Potentiale für die Verwertung der Aschen in den thermochemischen Prozessen wie AshDec oder CaNaPhos abgeschätzt werden. T2 - DWA Klärschlammnetzwerk Nord-Ost CY - Berlin, Germany DA - 21.01.2026 KW - Phosphor KW - Recycling KW - Thermochemisch KW - Großtechnik PY - 2026 AN - OPUS4-65611 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Die Ökodesign-Rahmenverordnung - Produkteffizienz neu gedacht N2 - Die Präsentation fasst das europäische Verständnis für den Begriff "Produkteffizienz" und die diesbezügliche Entwicklungen der vergangenen Jahre zusammen. Es wird eine Verbindung zwischen Rechtssetzung, Normung und Forschung hergestellt und entsprechende Beiträge zur der Transformation von einer linearen- zu einer zirkulären Wirtschaft (Circular Economy) erörtert. T2 - DIN-Mitgliederdialog CY - Berlin, Germany DA - 03.03.2026 KW - Circular economy KW - Product efficiency KW - Normung KW - Ecodesign KW - Policymaking PY - 2026 AN - OPUS4-65631 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Miclea, Paul T1 - Microanalysis of Airborne Nano/Microplastic Particles in an Textile Industrial Environment N2 - Micro- and nanoplastics (MNPs) are emerging global contaminants, present in air, soil, and water. The textile industry is potentially a major contributor, releasing synthetic particles like polyamide, polyester, and acrylic during production. This study assessed MNP levels outside and inside a textile-processing facility using online air samplers with silicon (Si) and quartz filters. Real-time particle counts (PM0.3–PM10) were obtained via a laser detector. Si filters (9 mm, 10/1 µm pores) and quartz filters (25 mm, 1.2 µm pores, pre-calcined at 800°C) were used for sampling. Custom holders allowed selective sampling for PM10 and PM1 on Si filters. Sampling conditions included a 3-hour collection at 2 L/min (GilAir Plus pump) starting at 7:00 AM (T1) and 2:00 PM (T2), with intermittent ventilation, 23.3 °C average temperature, and 52.5% humidity. Particle weights collected (µg) were: quartz – 4.9E-05 (T1), 5.1E-05 (T2); Si – 3.2E-05 (T1), 5E-06 (T2). Outside particle counts ranged from 3,584 (T1) to 15,165 (T2); inside: 9,901 (T1) to 12,921 (T2). Maximum indoor PM10 and PM0.3 levels were 72/m³ and 71,979/m³, respectively. Particles were analyzed using electron microscopy and µRaman spectroscopy, confirming high concentrations of irregularly shaped PP-based particles (1–5 µm). T2 - 12th TEXTEH CY - Bucharest, Romania DA - 23.10.2025 KW - Microplastics KW - Airborne particles KW - Raman microspectroscopy PY - 2025 AN - OPUS4-64485 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Mikroplastik Detektion mit Thermoanalytischen Methoden: Analytik, Referenzmaterial, Ringversuche N2 - Ich dem Vortrag geht es um die Vorstellung von thermoanalytischen Methoden für die Mikroplastik-Detektion. Verschiedene Kopplungsmöglichkeiten werden gezeigt und die Funktionsweise der TED-GC/MS wird erklärt. Im zweiten Teil werden Referenzmaterialien für die Mikroplastik-Analytik diskutiert. PET -Tabletten des PlasticTrace Projektes werden vorgestellt. Am Ende wird der VAMAS Ringversuch zur Mikroplastik-Detektion gezeigt. T2 - Plastik, Mikroplastik, Nanopartikel, PFAS und Verunreinigungen (Agilent Workshop) CY - Hamburg, Germany DA - 28.05.2024 KW - Mikroplastik KW - TED-GC/MS KW - Polymer 3R KW - Ringversuche KW - Referenzmaterial PY - 2024 AN - OPUS4-60155 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogel, Christian T1 - Investigating the Thermal Decomposition of PFAS in a Full-Scale Commercial Hazardous Waste Incinerator (SERDP ER24-4073) N2 - Effective and safe treatment of per- and polyfluoroalkyl substances (PFAS)-laden waste in full-scale hazardous waste facilities is currently the only commercial method for large-scale PFAS destruction, but concerns remain about incomplete combustion and harmful byproducts. Therefore, the fate of fluorine during incineration was investigated in a full-scale hazardous waste incinerator to assess the viability and potential risks of this method. The project involves developing advanced analytical tools, including real-time infrared spectroscopy, and conducting trial burns under varied conditions. Conditions that influence incineration performance are identified, analyzing for products of incomplete destruction (PIDs), exploring the role of fly ash and surfaces in PFAS breakdown, and evaluating the potential formation of polyfluorinated dioxins and furans. Collectively, these tasks aim to deliver practical tools and guidance for scientists and engineers, while informing policymakers and the public on the benefits and potential risks of PFAS incineration. T2 - DoW Applied Innovation Workshop CY - Washington, DC, USA DA - 02.03.2026 KW - Per- and polyfluoroalkyl substances (PFAS) KW - Incineration PY - 2026 AN - OPUS4-65639 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Challenges in microplastics standardisation N2 - This talk addresses the challanges in microplastic analytics. It shows the need of standards, analytics and reference materials for accurate and reliable measurements. It explains the state of the art for referenence materials in this field and their problems. A solution is presented with PET tablets. The urgent need of harmonisation it also emphasised. T2 - MARII Summit CY - Madrid, Spain DA - 15.10.2025 KW - Microplastics KW - Reference materials PY - 2025 AN - OPUS4-64488 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Falkenhagen, Jana T1 - Challenges of SEC and the necessity of round robin tests N2 - Size exclusion chromatography (SEC) is still the method of choice for determining the molar mass and molar mass distribution of macromolecules. It is a liquid chromatographic technique that separates molecules based on their size, respectively their hydrodynamic volume using a porous stationary phase that allows smaller molecules to pass through the pores while excluding larger molecules. The chromatogram from the size separation can be calibrated using polymers of known molar mass resulting in a relative molar mass distribution curve. From this distribution curve molar mass averages and the oligomer content (percentage of peak area smaller than 1000 g/mol and 500 g/mol) of polymers can be derived. The determination of oligomer content is important, because it is often used in regulatory contexts as a measure of small, mobile and potentially more toxic parts of the polymer. Polymer regulations are of increasing political and societal importance. Regulations often strive for narrow limits. But SEC has rather large error margins of 10-20% for the molar mass determination performed in different laboratories or on different instruments. These variances are well known to all experts and users and have been investigated in several round robin tests in the past. These resulted in DIN and ISO standards which, in our opinion, no longer meet today's requirements. Gaps have been identified that require further harmonization. Different polymer types or classes require different methods. On the other hand, as far as we know, the margins of error in determining oligomer content have not yet been investigated. It is expected that the variation will be rather high. This is because it depends on many factors related to the experimental conditions (column sets used, solvent, temperatures, sample preparation) on the one hand, and the data evaluation mechanisms (choice of baseline and peak limits) on the other. In order to actually measure the error margins and to support this with actual data a round robin test has been performed from June to November 2024 with approx. 40 participating laboratories. Three different solvents were selected, namely THF, DMAc or DMF and water. The samples were selected taking into account a wide range of practical aspects far from narrowly distributed standards: e.g higher distribution range, reduced solubility, included side components, copolymers and dispersions with gel content. In this contribution we will present the detailed concept of this round robin test and first impressions. T2 - 11th International Symposium on the Separation and Characterization of Natural and Synthetic Macromolecules CY - Amsterdam, Netherlands DA - 21.01.2025 KW - Size exclusion chromatography KW - Round robin tests PY - 2025 AN - OPUS4-62533 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schumacher, Julia T1 - Unlocking black fungi: from genomes to material conservation and biotechnological innovation N2 - Black fungi are a polyphyletic group of melanized ascomycetes adapted to extreme environments such as deserts, rocks, and human-made surfaces. Their slow compact growth, and thick melanized cell walls confer exceptional stress tolerance but have long hindered molecular studies and genetic engineering. Consequently, the biology and biotechnological potential of these organisms remained largely unexplored. To overcome these limitations, we selected the rock-inhabiting black fungus Knufia petricola as a model. Its genome sequence (12 contigs, ~10,000 genes) enabled the development of a versatile genetic toolbox based on CRISPR/Cas9-mediated editing, achieving up to 100% homologous recombination and supporting multiplex editing of at least six genomic regions. Color-based selection systems targeting pigment genes enable rapid identification of strains with correctly integrated expression cassettes, including simultaneous insertion of optimized genes coding for blue, green, and red fluorescent proteins for co-localization and protein interaction studies. These tools enable functional analyses of traits central to extremotolerance, such as the role of melanin in stress protection, biofilm formation, and material interactions. Furthermore, K. petricola has been established as a eukaryotic expression platform: heterologous genes from bacteria, fungi, and plants can be expressed under constitutive or inducible promoters, including the Tet-on system for tunable gene regulation. Pigment-free strains provide access to metabolic precursors, enabling high-level synthesis of alternative secondary metabolites. Importantly, the optimized transformation protocols were successfully transferred to the Antarctic black fungus Cryomyces antarcticus, a cryptoendolithic extremophile and astrobiology model, demonstrating that even the most stress-tolerant fungi can be genetically engineered. Together, the genome sequence and advanced genetic engineering strategies have transformed K. petricola from a challenging extremotolerant organism into a tractable model for studying stress adaptation, material interactions and a promising host for biotechnology and synthetic biology approaches. These achievements, combined with emerging black fungal genomes, inform sustainable material protection strategies to mitigate colonization and biodeterioration of exposed surfaces, linking fundamental research with applied solutions for material conservation and industrial biotechnology. T2 - Annual Conference of the Association for General and Applied Microbiology (VAAM) 2026 CY - Berlin, Germany DA - 22.03.2026 KW - Functional genetics KW - Material colonizer KW - Pigments PY - 2026 AN - OPUS4-65752 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koerdt, Andrea T1 - Mikrobielle Einflüsse auf Wasserstoffspeicherung: Materialien, Abbauprozesse und Teststrategien N2 - Wasserstoff gilt als Schlüsseltechnologie für die Energiewende – doch seine sichere Anwendung stellt neue Anforderungen an Technik, Infrastruktur und Personal. Die Veranstaltung „H₂ Sicherheit“ bietet eine umfassende Plattform, um sich über die sicherheitsrelevanten Aspekte von Wasserstoff zu informieren und praxisnahe Lösungen kennenzulernen. Expert:innen aus Forschung, Industrie und Netzbetrieb geben Einblicke in aktuelle Entwicklungen, Herausforderungen und Best Practices. Fokus dieser Präsentation war der Mikrobielle Einfluss bei der unterirdischen Speicherung von Wasserstoff und das neuartige Testsystem (MISTRAL) T2 - DVGW- H₂ Sicherheit CY - Online meeting DA - 24.03.2026 KW - Wasserstoff KW - Unterirdische geologische Formationen KW - MISTRAL KW - MIC KW - Hochdruckbehälter KW - Biokorrosion PY - 2026 UR - https://www.dvgw-kongress.de/veranstaltungen/gas/h2-sicherheit#collapse-8103 AN - OPUS4-65810 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -