TY - CONF A1 - Casperson, Ralf T1 - Schienenprüfung mit Wirbelstrom N2 - Ausgehend von einer Machbarkeitsstudie im Jahr 1999 wurde von der BAM in Zusammenarbeit mit der DB AG und verschiedenen anderen Partnern ein Schienenprüfsystem zur Detektion und Bewertung von Schienenfehlern des Typs Head Checks entwickelt. Dieses Prüfsystem arbeitet nach dem Wirbelstromprinzip. Die Firma Prüftechnik Linke & Rühe GmbH aus Magdeburg fertigt und vertreibt seit geraumer Zeit verschiedene manuelle und zuggestützte Prüfsysteme, die auf dieser Entwicklung basieren. Seit Januar 2013 wird in Deutschland der Qualitätsnachweis nach der Schienenbearbeitung mittels Wirbelstromprüfung gefordert. Im Laufe der Entwicklungsarbeiten wurden verschiedentlich benachbarte Themenfelder rund um die Prüfung auf Head Checks gestreift. Der Schwerpunkt dieses Vortrages liegt auf diesen erweiterten Möglichkeiten der magnetinduktiven Prüfung von verlegten Schienen. Hierbei wird sowohl auf die Verbesserung der Möglichkeiten des bestehenden Systems (z. B. durch Kopplung mit anderen Prüfverfahren) als auch auf mögliche Neuentwicklungen (z. B. durch Einsatz neuer Sensorik) eingegangen. Angestrebte Ziele sind z. B. die Verbesserung der Prüfaussage bei der Head Check Prüfung, Erweiterung der Prüfaussage auf andere Schienenfehlertypen oder die Bestimmung von Schieneneigenschaften wie Härte und Rauigkeit. T2 - ZfP im Eisenbahnwesen CY - Wittenberge DA - 15.03.2016 KW - Schienenprüfung KW - Wirbelstromprüfung KW - Zerstörungsfreie Prüfung PY - 2016 AN - OPUS4-35516 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mehdianpour, Milad A1 - Waßmuth, Carl-Friedrich T1 - Minimalinvasive Materialuntersuchungen an seilabgespannten Rohrmasten zur Bauwerkserhaltung T1 - Minimally invasive material tests on guyed tubular masts N2 - Abgespannte Stahlrohrmaste zur Rundfunkübertragung wurden in den 1950er- und 60er-Jahren häufig mit Paralleldrahtbündeln errichtet. Diese Seile werden seit geraumer Zeit wegen Korrosionsschäden sukzessive gegen vollverschlossene Spiralseile ausgetauscht. Infolge der damit einhergehenden Veränderung der Steifigkeiten ist mit dem Austausch oft eine Neuberechnung erforderlich. Unter Berücksichtigung der aktuellen Normen können nicht immer alle Nachweise erfüllt werden, selbst wenn das Bauwerk weitgehend noch intakt erscheint. Rohrschaftsanierungen sind extrem aufwändig und können den wirtschaftlichen Totalschaden darstellen, d. h., dem Bauwerk droht Abriss und Neubau. Für die Sanierung des 231 m hohen abgespannten Stahlrohrmastes am Standort Berlin Scholzplatz wurden minimalinvasive Materialuntersuchungen vorgenommen, basierend auf In-situ- und Labortests. In den statistischen Auswertungen konnte belegt werden, dass gegenüber den Angaben der Bauwerksdokumentation höhere Festigkeiten vorlagen. Durch präzise Lastannahmen und für das Bauwerk optimierte Seilvorspannungen konnten aufwändige Verstärkungsmaßnahmen des Rohrschaftes vermieden werden. KW - Bauwerkserhaltung KW - Mast, abgespannter KW - Rohrmast KW - Antennenträger aus Stahl KW - Seile KW - Materialuntersuchung KW - Härtemessung KW - Zugversuch KW - Brinellhärte/Zugfestigkeit KW - Zugfestigkeit/Streckgrenze PY - 2016 UR - http://dx.doi.org/10.1002/bate.201500094 DO - https://doi.org/10.1002/bate.201500094 SN - 1437-0999 VL - 93 IS - 1 SP - 8 EP - 13 PB - Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG CY - Berlin AN - OPUS4-35522 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stroh, Julia T1 - In situ Untersuchungen von Hydratations- und Schädigungsmechanismen an Baustoffen N2 - In diesem Vortrag werden hochauflösende analytische Methoden für die Untersuchungen von zementgebundenen Baustoffen vorgestellt. Zum einen werden frühe Hydratationsprozesse in situ und mit hoher Zeitauflösung untersucht und die Einflüsse von polymeren Fließmittel und Stabilisierer auf die Erstarrungsverzögerung beobachtet. Zum anderen werden Phasenübergänge unter schädigenden Angriffen im Gefügeprofil auf µm-Skala verfolgt. Die Möglichkeit die Auswirkungen der niedrigen realen Konzentrationen von schädigenden Agenten zu identifizieren stellt ein großes Potential für die Schädigungsanalyse unter realen Bedingungen dar. Insgesamt haben die vorgestelletn analytischen Techniken ein großes Potential für die Analyse der Phasenentwicklung in zementgebundenen Baustoffen. T2 - Gemeinsamer Workshop der Sektion Angewandte Mineralogie in Umwelt & Technik und der Sektion Chemie, Physik und Kristallographie der Minerale von der Deutschen Mineralogischen Gesellschaft CY - Bad Windsheim, Germany DA - 24.02.2016 KW - Portlandzement KW - Hydratation KW - Additive KW - Schädigung KW - komplexe Angriffe PY - 2016 AN - OPUS4-35469 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lehmann, Jens A1 - Burkert, Andreas A1 - Mietz, Jürgen T1 - Investigations proofing the passive layer stability of stainless steels N2 - The presented investigations have proved the principal suitability of the KorroPad method to assess the passive layer stability of stainless steels. The electrochemical mode of action could be described in detail and limitations of the applicability have been demonstrated. The influence of different surface finishes has been investigated and verified by known methods for describing corrosion resistances. As a result, the increased corrosion susceptibility of two ground surfaces has been detected, but also the corrosion resistance of further surface finishes could be confirmed. KW - Stainless steel KW - KorroPad KW - Passive layer PY - 2016 DO - https://doi.org/10.1002/maco.201408202 VL - 1 IS - 67 SP - 84 EP - 91 PB - WILEY-VCH Verlag GmbH & Co. KGaA CY - Weinheim AN - OPUS4-35545 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lehmann, Jens T1 - KorroPad - Beurteilung der Korrosionsbeständigkeit von Oberflächen nichtrostender Stähle N2 - Mit dem KorroPad Verfahren ist es dem Anwender möglich den Zustand der Passivschicht nichtrostender Stähle auf sehr einfache und schnelle Weise einschätzen zu können. Das Verfahren eignet sich dazu, den Grad der Passivität in Abhängigkeit der Umgebungsbedingungen und der Zeit nachzuvollziehen. Dies ermöglicht dem Anwender und Verarbeiter von nichtrostenden Stählen, die Lagerungsbedingungen und –zeiten einer frisch bearbeiteten Stahloberfläche zu ermitteln, welche für die Ausbildung einer stabilen Passivschicht notwendig sind, bevor diese risikoarm eingesetzt werden kann. Wie die hier dargestellten Beispiele und auch weitere zahlreiche praktische Anwendungen gezeigt haben, eignet sich das KorroPad ebenfalls für die Identifikation kritischer Prozessparameter bei der Verarbeitung nichtrostender Stähle. Mit dem Verfahren lassen sich viele prozessbedingte Einflussfaktoren auf die Oberflächengüte wie auch auf den Werkstoff charakterisieren. Aufgrund der schnellen und einfachen Auswertung der Prüfergebnisse können positive wie auch negative Veränderungen hinsichtlich der Passivschichtstabilität zügig erkannt werden. Dies ermöglicht es dem Anwender schnell zu reagieren, um kritische Einflüsse zu korrigieren und um eine Optimierung von Inhouse-Prozessen durchzuführen. Weitere Einsatzgebiete sind im Bereich der Wareneingangs- und/oder Warenausgangskontrolle denkbar, überall wo es um die Frage der Passivschichtstabilität einer nichtrostenden Stahloberfläche geht. T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen Zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Germany DA - 25.02.2016 KW - Korrosionsschnelltest KW - nichtrostender Stahl KW - Passivschicht KW - KorroPad PY - 2016 AN - OPUS4-35570 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fabry, Çağtay A1 - Pittner, Andreas T1 - Data-based process monitoring and control in narrow-gap GMAW N2 - An experimental setup to integrate laser sensor into conventional GMAW setups via a unified control architecture is described. The setup is used to automate and monitor narrow-gap GMAW. A way to develop GMAW arc-sensors using artificial neural networks using the setup is shown. The control system is connected to a relational database to store various process measurements. The database can be accessed to filter previous weldments by numerous criteria which allows modelling of process parameter correlation among vast datasets. Such models can be used for process monitoring and control in future applications. T2 - IIW Commission I, IV, XII / SG 212 Intermediate Meeting CY - Genova, Italy DA - 07.03.2016 KW - Narrow gap GMAW KW - MSG-Engspaltschweißen KW - Artificial neural networks KW - Profile measurement KW - GMAW control KW - Arc-sensing KW - Künstliche neuronale Netze KW - Profilvermessung KW - MAG Prozesssteuerung KW - Lichtbogensensorik PY - 2016 AN - OPUS4-35535 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst T1 - Levee inspection - geophysics between science, standards, reliability and budgets N2 - Numerous case histories show evidence that geophysical methods are valuable tools for levee inspection and monitoring. National and international standards and recommendations recommend the use of geophysics for a variety of tasks. However, in some cases reported have been flaws missed or false indications given. Due to the larger variety in type, size and construction of levees and the even larger variety of potential tasks and targets the success of geophysical surveys still pretty much depends on the available budget and the experience and capabilities of the clients and contractors involved. It is strongly recommended that all relevant parties agree on the detailed objectives of the survey, required accuracy and reliability of the results and any follow up measures. For the most common tasks more research and practical work using techniques as POD (probability of detection), which are well established in other fields of non-destructive testing, would be of benefit. T2 - SAGEEP 2016 CY - Denver, CO, USA DA - 20.03.2016 KW - Levee KW - Geophysics KW - Inspection PY - 2016 SP - paper levees 07, 1 EP - 4 AN - OPUS4-35705 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst T1 - Progress in using geophysical methods for foundation quality assurance and inspection N2 - Modern geophysical methods might be either directly applied to foundations or integrated into existing testing schemes to assist in quality assurance and inspections. This paper gives an overview on available ideas and some more detailed examples from the author `s work including: - Vibrator technologies to improve pile integrity testing. - Ideas from vertical seismic profiling used in multichannel pile inspection - Cross- and downhole seismics to check the diameter of jet grouting columns - Improving the parallel seismic methods for precise length measurement of piles and foundation walls  Seismic migration methods to improve ultrasonic imaging of foundation slabs  Seismological tools to monitor subtle changes in concrete constructions The author strongly believes that the cooperation between geophysics and civil engineering, which is obviously becoming stronger and stronger, will lead to a large number of innovative approaches for investigations tasks currently still unresolved. A lot of challenges and chances for science and technology are right here. T2 - SAGEEP 2016 CY - Denver, CO, USA DA - 20.03.2016 KW - Non-destructive testing KW - Piles, foundations KW - Slabs KW - Parallel seismic KW - Vibrator KW - Integrity PY - 2016 AN - OPUS4-35706 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst T1 - Innovative seismic and resistivity tools for determining the diameter of jet grouting columns N2 - Jet grouting is used for soil improvement, foundation support and groundwater low control all over the world. It is well accepted and subject of standardization in many countries. However, some issues with the method remain. As the grout columns are produced in the subsurface without visual control in an often inhomogeneous soil, the prediction of the column’s diameter is still a challenge. All methods applied so far have their limitations. The approach presented in this study is twofold. At Colorado School of Mines a resistivity probe has been developed, which is pushed into the fresh grout directly after production. ERT sections are measured and inverted. Given some background information is available, the diameter of the columns can be evaluated. At BAM the focus has been on post-production investigations using seismic borehole methods. After hardening of the concrete seismic waves are sent through the column downhole (sensors placed in a casing in the column’s axis, source on top) and crosshole (source and sensor in boreholes on opposite sides of the column). We have developed a scheme to evaluate the diameter of the column based on travel time measurements without calibration. As this method is eventually more time and cost intensive we assume its application mainly for test columns. These are casted and dug out for visual inspection to determine appropriate grouting parameters. Our method would replace the often very cost intensive visual inspection. Both approaches have been tested at three test columns produced at BAM’s test site at Horstwalde, Germany and on an actual constructions site. Both methods have been in good agreement with the diameters predicted by the jet grouting contractors, which were confirmed in one case by mechanical measurements. T2 - SAGEEP 2016 CY - Denver, CO, USA DA - 20.03.2016 KW - Jet grouting KW - Diameter KW - Quality assurance KW - Seismic PY - 2016 AN - OPUS4-35708 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Hoffmann, Gabi T1 - Schadensursachen an Rohrleitungen N2 - Das Gefährdungspotential von Rohrleitungen hängt primär von den Eigenschaften des durchfließenden Stoffes, den Betriebsbedingungen und den äußeren Beanspruchungen ab. Zu den Hauptschadensursachen an Rohrleitungen zählen Korrosion, Druckstöße und Kavitationsschläge, Zeitstandbeanspruchung, struktur- und fluidmechanische Schwingungen, Fremdberührungen, elektrische Fremdbeeinflussung und geologische Besonderheiten im Bereich des Rohrleitungsverlaufes. T2 - Workshop:Anwendung der verteilten akustischen und faseroptischen Sensorik zur kontinuierlichen Überwachung von Rohrleitungen CY - Berlin DA - 01.03.2016 KW - Korrosion KW - Zeitstandbeanspruchung KW - Struktur- und fluidmechanische Schwingungen KW - Elektrische Fremdbeeinflussung PY - 2016 AN - OPUS4-35624 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wu, Cheng-Chieh A1 - Weisbrich, S. A1 - Neitzel, F. ED - Nicoletto, G. ED - Pastrama, S. D. ED - Emri, I. T1 - Inverse finite element adjustment of material parameters from integrated analysis of displacement field measurement N2 - The determination of material parameters from displacement field measurement is being examined for linear elastic solid. A frequently used approach to compute material constants can be found in many studies. Even though they presented the approach in many different variations, but in the end they are essentially based on the same algorithm: Parameters are iteratively tuned until the computed results are in accordance with the measurements. The main drawback of this approach is that mainly commercial software is used that hinders us to investigate its inner evaluation process. This leads to the question, how the results from this commercial software can be trusted. On the contrary to these debatable approaches, we present a method that inverts the procedure of finite element method by using the most general model for a least-squares adjustment – the GAUSS-HELMERT Model. T2 - 32nd DANUBIA ADRIA SYMPOSIUM on Advances in Experimental Mechanics CY - Starý Smokovec, Slovakia DA - 22.09.2015 KW - Integrated analysis KW - Inverse problem KW - Finite element method KW - Least-squares adjustment KW - Model and measurement based analysis PY - 2016 UR - http://www.sciencedirect.com/science/article/pii/S2214785316002091 DO - https://doi.org/10.1016/j.matpr.2016.03.004 SN - 2214-7853 VL - 3 IS - 4 SP - 1211 EP - 1215 PB - Elsevier Ltd. AN - OPUS4-35629 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Blankenhagel, Paul T1 - Fireballs of organic peroxides – a worst case scenario? N2 - Fire and explosion hazards associated with storage and transportation of flammable materials have been a matter of great interest in the recent times. There are numerous studies on pool fires, BLEVEs and fireballs of hydrocarbon fuels, whereas BLEVEs and fireballs of organic peroxides (OP) are not investigated in detail yet. Fireball is a scenario that can occur when an OP filled drum is subjected to a surrounding fire. This presentation tries to extend the first investigations of OP BLEVEs presented on IGUS EOS Meeting 2015 in Ottawa. The following aspects are shown: Experimental investigation of a fired drum filled with 200 L DTBP; analyses of flame characteristics, e.g. temperatures, mass burning rates, SEP, thermal radiation properties and an overall comparison with DTBP pool fires; presentation of recommended safety distances. T2 - IGUS EOS Meeting 2016 CY - Basle, Switzerland DA - 11.04.2016 KW - Fire balls KW - Organic peroxides KW - Pool fire KW - DTBP PY - 2016 AN - OPUS4-36007 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heitkamp, D. T1 - Bronopol – results of testing and assessment in consideration of UN TDG classification N2 - Bronopol (2-Bromo-2-nitropropane-1,3-diol) is classified since many years as a substances related to self-reactive substances according to the international regulations on the transport of dangerous goods (UN 3241, Division 4.1, Packing Group III). Based on all new test results and according to the principles of the UN Recommendations, Bronopol is not an explosive according to UN TDG (Class 1) and GHS Chapter 2.1 and is also not a self-reactive substance (SADT > 75 °C). Listing of Bronopol under 2.4.2.4.2 (UN model regulations) appears not to be justified compared to Musk Xylene, Azodicarbonamide and Isosorbid-5-mononitrate. T2 - IGUS EOS Meeting 2016 CY - Basle, Switzerland DA - 11.04.2016 KW - Bronopol KW - 2-Bromo-2-nitropropane-1,3-diol KW - Self-reactive substances KW - UN 3241 PY - 2016 AN - OPUS4-36008 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Blankenhagel, Paul T1 - Thermal radiation impact of DTBP fireballs N2 - The burning behaviour and thermal radiation of pool fires of organic peroxides (OP) have been studied by several authors in the past. It was shown that mass burning rates, flame temperatures and thus the Surface Emissive Power (SEP) of OP exceed to that of hydrocarbons considerably. These facts lead to further investigations of even dangerous worst case scenarios i.e. related to storage and transportation. A metal drum containing 200 l of DTBP (Di-tert-butyl peroxide) is investigated under a surrounding wood fire. Due to a higher heat flux to the substance, the mass burning rate reaches multiples of an equivalent pool fire and results in several fireballs. The analyses of thermographic camera images and radiometer measurements show higher flame lengths, higher temperatures and therefore increased thermal radiation compared to OP pool fires. The resulting greater safety distances for a DTBP fireball event are discussed. T2 - New Trends in Research of Energetic Materials (NTREM) CY - Pardubice, Poland DA - 20.04.2016 KW - Organic peroxide KW - Pool fire KW - Fireball KW - Thermal radiation KW - Safety distance PY - 2016 AN - OPUS4-36009 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Timme, Sebastian T1 - Structural integrity of CFRP in fire N2 - Fire stabilty of carbon fiber reinforced polymer shell structurres in intermediate-scale (500 x 500 mm²). Specimen is exposed to fully developed fire and loaded with static compressive force. Time to failure of CFRP is measured. T2 - Working group seminar 7.5 (Schartel) CY - Plockhorst, Germany DA - 13.03.2016 KW - Carbon fiber reinforced polymer KW - Fire stability KW - Intermediate-scale KW - Shell structure KW - Structural integrity PY - 2016 AN - OPUS4-36069 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva A1 - Goedecke, Thomas A1 - Kraume, M. ED - Ziegahn, K.-F. T1 - Dichtheitsprüfung unter Verwendung von Prüfgasen N2 - Ziel einer Dichtheitsprüfung ist es entweder, mit einem quantitativen Prüfverfahren integrale Leckageraten zu messen, oder mittels eines lokalisierenden Verfahrens den genauen Leckageort aufzuspüren. In einigen Fällen kann das Betriebsmedium gleichzeitig das Prüfmedium sein, wenn geeignete Sensorik zu Verfügung steht. In anderen Fällen kann dies aus unterschiedlichen Gründen nicht möglich sein. Daher ersetzt man bei der Verwendung von Prüfgasverfahren das Betriebsmedium durch ein spezifisch nachweisbares Prüfgas. Für die Interpretation eines quantitativen Messergebnisses ist es notwendig, die Ist-Leckagerate mit einer zuvor berechneten Grenzleckagerate (maximal zulässige Leckagerate) zu vergleichen. Entspricht das für die Dichtheitsprüfung verwendete Prüfgas nicht dem Betriebsmedium, so ist hierfür eine Umrechnung von Leckageraten notwendig. Es wird ein Überblick über für die Dichtheitsprüfung gängige Prüfgase, deren Eigenschaften sowie Vor- und Nachteile gegeben. Die grundlegenden Prinzipien bei der Umrechnung von Leckageraten (Druckumrechnung; Temperaturumrechnung; Umrechnung der Gasart bzw. des Mediums) werden vorgestellt. T2 - 45. Jahrestagung der Gesellschaft für Umweltsimulation (GUS) CY - Stutensee-Blankenloch, Germany DA - 16. März 2016 KW - Dichtheit KW - Dichtheitsprüfung KW - Prüfgase KW - Dichtheitsprüfverfahren PY - 2016 SN - 978-3-9816286-7-8 SP - 223 EP - 237 AN - OPUS4-36151 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva T1 - Dichtheitsprüfung unter Verwendung von Prüfgasen N2 - Ziel einer Dichtheitsprüfung ist es entweder, mit einem quantitativen Prüfverfahren integrale Leckageraten zu messen, oder mittels eines lokalisierenden Verfahrens den genauen Leckageort aufzuspüren. In einigen Fällen kann das Betriebsmedium gleichzeitig das Prüfmedium sein, wenn geeignete Sensorik zu Verfügung steht. In anderen Fällen kann dies aus unterschiedlichen Gründen nicht möglich sein. Daher ersetzt man bei der Verwendung von Prüfgasverfahren das Betriebsmedium durch ein spezifisch nachweisbares Prüfgas. Für die Interpretation eines quantitativen Messergebnisses ist es notwendig, die Ist-Leckagerate mit einer zuvor berechneten Grenzleckagerate (maximal zulässige Leckagerate) zu vergleichen. Entspricht das für die Dichtheitsprüfung verwendete Prüfgas nicht dem Betriebsmedium, so ist hierfür eine Umrechnung von Leckageraten notwendig. Es wird ein Überblick über für die Dichtheitsprüfung gängige Prüfgase, deren Eigenschaften sowie Vor- und Nachteile gegeben. Die grundlegenden Prinzipien bei der Umrechnung von Leckageraten (Druckumrechnung; Temperaturumrechnung; Umrechnung der Gasart bzw. des Mediums) werden vorgestellt. T2 - 45. Jahrestagung der Gesellschaft für Umweltsimulation (GUS) CY - Stutensee-Blankenloch, Germany DA - 16.03.2016 KW - Dichtheit KW - Dichtheitsprüfung KW - Prüfgase KW - Dichtheitsprüfverfahren PY - 2016 AN - OPUS4-36134 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stahl, Michael A1 - Eckert, Katrin T1 - Gefahrgut-Schnellinfo der Datenbank GEFAHRGUT N2 - Präsentation der Gefahrgut-Schnellinfo der Datenbank GEFAHRGUT T2 - 7. Gefahrgut-Infomarkt CY - Mühldorf am Inn, Germany DA - 10.05.2016 KW - Datenbank GEFAHRGUT KW - Gefahrgut-Schnellinfo KW - Gefahrgut PY - 2016 AN - OPUS4-36213 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stahl, Michael A1 - Eckert, Katrin T1 - Informationssystem Datenbank GEFAHRGUT N2 - Möglichkeiten der Recherche in der Datenbank GEFAHRGUT T2 - 7. Gefahrgut-Infomarkt CY - Mühldorf am Inn, Germany DA - 10.05.2016 KW - Gefahrgut KW - Datenbank GEFAHRGUT PY - 2016 AN - OPUS4-36214 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Farag, Zeinab Ramadan A1 - Friedrich, Jörg Florian A1 - Krüger, Simone A1 - Hidde, Gundula A1 - Moustapha, M. E. T1 - Adhesion promotion of thick polyphosphate-poly(allylamine) films onto polyolefin substrates by plasma polymers N2 - The adhesion of thick poly(allylamine)-polyphosphate layers (1 µm) deposited by the wet-chemical layer-by-layer technique (LbL) onto polyethylene or polystyrene (each 100 µm) was very low. To promote the adhesion of these LbL layers the polyolefin substrates were oxidized at the surface by short exposure to the oxygen plasma (2 or 5 s) and subsequently coated with an interlayer of plasma-deposited poly(allylamine) or poly(allyl alcohol) (100 nm). The plasma polymer interlayers have improved strongly the adhesion between polyolefin substrates and polyphosphate coatings. Such phosphate coatings are interesting for life sciences (nucleotide formation) but also for fire retardancy in combination with N-rich compounds such as melamine. The intention was to prefer chemical and hydrogen bonds for adhesion promoting because of their high binding energy. Therefore, the introduced oxygen-containing groups at the polyolefin surface could interact with the OH or NH2 groups of the adhesion-promoting plasma polymer interlayer. These groups were also able to interact strongly with the poly(allylamine)-polyphosphate topcoating. The coated polyolefins were investigated using Fourier Transform Infrared Spectroscopy in Attenuated Total Reflectance mode (FTIR-ATR), X-ray Photoelectron Spectroscopy (XPS), Thermo-Gravimetric Analyses (TGA) and Atomic Force Spectroscopy (AFM) and 90° peel test. KW - Plasma-polymerized poly(allylamine) KW - Adhesion KW - Layer-by-layer deposition KW - Plasma polymerization PY - 2016 UR - http://www.tandfonline.com/doi/abs/10.1080/01694243.2015.1095626 DO - https://doi.org/10.1080/01694243.2015.1095626 SN - 1648-4142 VL - 30 IS - 3 SP - 231 EP - 246 PB - Taylor & Francis AN - OPUS4-35885 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sen, X. T1 - 2015 Tianjin explosions N2 - In 2015 a series of explosions occurred at a container storage station at the Port of Tianjin, China, on Wednesday, 12 August 2015, that killed over one hundred people and injured hundreds of firemen and others. The first two explosions happened within 30 seconds of each other at the facility. The second explosion was larger and involved the detonation of about 800 tons of ammonium nitrate. The cause of the explosions was not known at first, but an investigation of the Chinese authorities concluded in February 2016 that an overheated container of dry nitrocellulose was the cause of the initial explosion. Colleagues of the Nanjing University of Science and Technology and BAM worked together to analyze the reasons and the process of that incident based on knowledge about the properties of the involved substances, particularly ammonium nitrate and nitrocellulose, and potential mechanism of initiation and propagation. T2 - 16th Chief Inspectors of Explosives Conference CY - Bern, Switzerland DA - 18.04.2016 KW - Tianjin KW - Nitrocellulose KW - Ammonium nitrate PY - 2016 AN - OPUS4-35901 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pappalardo, Salvatore A1 - Russo, Pietro A1 - Acierno, Domenico A1 - Rabe, Sebastian A1 - Schartel, Bernhard T1 - The synergistic effect of organically modified sepiolite in intumescent flame retardant polypropylene N2 - The pyrolysis, flammability and fire behavior of polypropylene (PP) containing an intumescent flame retardant and sepiolite nanoparticles were investigated by performing thermogravimetry, oxygen index (LOI), UL-94, and cone calorimeter tests. The combination of 0.5 wt% of premodified sepiolite (OSEP) with 12 wt% of a commercial intumescent flame retardant showed a clear synergy in LOI, UL-94 ranking and peak heat release rate. The ternary formulation achieved a V-0 classification and, consequently, allowed a reduction in the amount of flame retardant necessary to achieve this result. Whereas OSEP and pristine sepiolite nanoparticles (SEP) affect the performance in PP nanocomposites quite similarly, OSEP outperformed SEP in the combination with intumescent flame retardant. The cone calorimeter results and dynamic rheological measurements confirmed the synergistic effect between the nanofiller and the flame retardant resulting from the improved properties of the residual protective layer. KW - Polypropylene KW - Intumescent flame retardant KW - Sepiolite KW - Cone calorimetry KW - Low oxygen index PY - 2016 DO - https://doi.org/10.1016/j.eurpolymj.2016.01.041 SN - 0014-3057 VL - 76 SP - 196 EP - 207 PB - Elsevier AN - OPUS4-35854 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Konersmann, Rainer T1 - Sicherheit durch Abstand N2 - Der Schutz vor Gefahren, die Gewährleistung der Sicherheit, ist eine notwendige Voraussetzung zur wirtschaftlichen und gesellschaftlichen Entwicklung. Seit frühester Zeit betreiben darum Staatssysteme einen beträchtlichen Aufwand, um gegen Angreifer gewappnet zu sein und materielle Werte vor Verlusten zu schützen. In der Vergangenheit wurden dazu eindrucksvolle Bauwerke errichtet. Die mittelalterlichen Burgen und Festungsbauwerke, die auch in Deutschland in außerordentlicher Anzahl vorhanden sind, sind ein Ausdruck dieser Vorsichtsmaßnahmen. Zu einem Kontrahenten wurde dadurch ein Mindestabstand erzwungen, der nicht unbemerkt überwunden werden konnte. Mit der fortschreitenden Entwicklung von Wissenschaft und Technik verloren diese Monumente jedoch ihre Bedeutung weil sich die Angriffs- und Verteidigungsstrategien infolge der technischen Entwicklung nicht mehr in ein Gleichgewicht bringen ließen. Heutzutage, im Zeitalter der Hochtechnologien, sind Abstandsregelungen immer noch notwendig, jedoch aus anderen Gründen. KW - Sicherheitsabstände KW - Gefahrenquellen KW - Abstandsregelungen PY - 2016 SN - 2191-0073 VL - 6 IS - 5 SP - 26 EP - 30 PB - Springer-VDI CY - Düsseldorf AN - OPUS4-35992 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -