TY - CONF A1 - Farahbakhsh, Mahin A1 - Tscheuschner, Frank A1 - Stahl, Michael T1 - Fachinformationssystem Datenbank GEFAHRGUT N2 - Es werden die Anwendungen des Gefahrgutdatenpools der BAM aufgezeigt, der ein zentrales Informationssystem für den Transport gefährlicher Güter darstellt. T2 - Internationale Gefahrgut-Tage Hamburg 2023 CY - Hamburg, Germany DA - 27.02.2023 KW - BAM-Liste KW - Datenbank GEFAHRGUT KW - Gefahrgut-Schnellinfo KW - Gefahrgutdatenpool KW - Gefahrguttransport KW - Informationssystem KW - Kurzinfo KW - Modul für Beförderungspapier KW - Modul für radioaktive Stoffe KW - BAM List KW - Dangerous Goods Database KW - Dangerous Goods Quickinfo KW - Radioactive Materials Module KW - Transport Documents Module PY - 2023 AN - OPUS4-57114 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Farahbakhsh, Mahin A1 - Tscheuschner, Frank A1 - Stahl, Michael T1 - Fachinformationssystem Datenbank GEFAHRGUT - Hilfe bei der Kennzeichnung der Umweltgefahr N2 - Möglichkeiten der Datenbank GEFAHRGUT und des Gefahrgutdatenservices die Notwendigkeit der Kennzeichnung der Umweltgefahr zu ermitteln T2 - Internationale Gefahrgut-Tage Hamburg 2023 CY - Hamburg, Germany DA - 27.02.2023 KW - Datenbank KW - Fachinformationssystem KW - Gefahrgut KW - Kennzeichnung KW - Umweltgefahr KW - Dangerous goods KW - Database KW - Environmentally hazardous substance KW - Labelling KW - Specialised information system PY - 2023 AN - OPUS4-57115 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Otremba, Frank A1 - Eberwein, Robert A1 - Hajhariri, Aliasghar A1 - Camplese, Davide A1 - Scarponi, Giordano Emrys A1 - Cozzani, Valerio T1 - Systems with Cryogenic Liquefied Gases in Fire Incidents N2 - Liquefied Hydrogen (LH2) or Liquefied Natural Gas (LNG) establish themselves as important energy carriers in the transport sector. Its storage requires tanks with Thermal Super Insulations (TSI) to keep the transported fluid cold. TSI has proven itself in various applications over a long time, but not in the land transport sector, where accidents involving collisions, fires, and their combination are to be expected. The focus of this study is to investigate the behavior of different types of TSI when exposed to a heat source that represents a fire. Therefore, a High- Temperature Thermal Vacuum Chamber (HTTVC) was used that allows the thermal loading of thermal insulation material in a vacuum and measuring the heat flow through the TSI in parallel. Within this study, 5 samples were tested regarding 3 different types of MLI, rock wool, and perlites. The thermal exposure caused different effects on the samples. In practice, this can be connected to the rapid release of flammable gases as well as a Boiling Liquid Expanding Vapour Explosion (BLEVE). These results are relevant for the evaluation of accident scenarios, the improvement of TSI, and the development of emergency measures. T2 - IMECE 2023 CY - New Orleans, Louisiana, USA DA - 29.10.2023 KW - LH2 KW - LNG KW - Fire PY - 2023 AN - OPUS4-58769 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. A1 - Bartholmai, Matthias A1 - Grotelüschen, Bjarne A1 - Strangfeld, Christoph T1 - Towards Autonomous NDT Inspection: Setup and Validation of an Indoor Localization System N2 - Monitoring and maintenance of civil infrastructure are of great importance, as any undetected damage can cause high repair costs, unintended deadtime, or endanger structural integrity. The inspection of large concrete structures such as bridges and parking lots is particularly challenging and time-consuming. Traditional methods are mostly manual and involve mapping a grid of measurement lines to record the position of each measurement. Current semi-automated methods, on the other hand, use GPS or tachymeters for localization but still require trained personnel to operate. An entirely automated approach using mobile robots would be more cost- and time-efficient. While there have been developments in using GPS-enabled mobile robots for bridge inspection, the weak signal strength in indoor areas poses a challenge for the automated inspection of structures such as parking lots. This paper aims to develop a solution for the automated inspection of large indoor concrete structures by addressing the problem of robot localization in indoor spaces and the automated measurement of concrete cover and rebar detection. T2 - 39th Danubia-Adria Symposium on Advances in Experimental Mechanics CY - Siófok, Hungary DA - 26.09.2023 KW - NDT Inspection KW - Mobile Robot KW - Indoor Localization KW - Setup and Validation PY - 2023 AN - OPUS4-58662 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Katja A1 - Stahl, Michael A1 - Farahbakhsh, Mahin T1 - Fachinformationssystem Datenbank GEFAHRGUT N2 - Es werden die Anwendungen des Gefahrgutdatenpools der BAM aufgezeigt, der ein zentrales Informationssystem für den Transport gefährlicher Güter darstellt. T2 - Stuttgarter Gefahrguttag CY - Stuttgart, Germany DA - 24.10.2023 KW - BAM-Liste KW - Datenbank GEFAHRGUT KW - Gefahrgut-Schnellinfo KW - Gefahrgutdatenpool KW - Gefahrguttransport KW - Informationssystem KW - Kurzinfo KW - Modul für Beförderungspapiere KW - Modul für radioaktive Stoffe KW - BAM List KW - Dangerous Goods Database KW - Dangerous Goods Quickinfo KW - Radioactive Materials Module KW - Transport Documents Module PY - 2023 AN - OPUS4-58710 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Katja A1 - Stahl, Michael A1 - Farahbakhsh, Mahin T1 - Fachinformationssystem Datenbank GEFAHRGUT - Hilfe bei der Kennzeichnung der Umweltgefahr N2 - Möglichkeiten der Datenbank GEFAHRGUT und des Gefahrgutdatenservices die Notwendigkeit der Kennzeichnung der Umweltgefahr zu ermitteln. T2 - Stuttgarter Gefahrguttag CY - Stuttgart, Germany DA - 24.10.2023 KW - Datenbank KW - Fachinformationssystem KW - Gefahrgut KW - Kennzeichnung KW - Umweltgefahr KW - Dangerous goods KW - Database KW - Environmentally hazardous substance KW - Labelling KW - Specialised information system PY - 2023 AN - OPUS4-58711 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eiben, Mario A1 - Stahl, Michael A1 - Farahbakhsh, Mahin T1 - Fachinformationssystem Datenbank GEFAHRGUT N2 - Es werden die Anwendungen des Gefahrgutdatenpools der BAM aufgezeigt, der ein zentrales Informationssystem für den Transport gefährlicher Güter darstellt. T2 - Münchner Gefahrguttage 2023 CY - Munich, Germany DA - 15.05.2023 KW - BAM-Liste KW - Datenbank GEFAHRGUT KW - Gefahrgut-Schnellinfo KW - Gefahrgutdatenpool KW - Gefahrguttransport KW - Informationssystem KW - Kurzinfo KW - Modul für Beförderungspapiere KW - Modul für radioaktive Stoffe KW - BAM List KW - Dangerous Goods Database KW - Dangerous Goods Quickinfo KW - Radioactive Materials Module KW - Transport Documents Module PY - 2023 AN - OPUS4-57530 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eiben, Mario A1 - Stahl, Michael A1 - Farahbakhsh, Mahin T1 - Fachinformationssystem Datenbank GEFAHRGUT - Hilfe bei der Kennzeichnung der Umweltgefahr N2 - Möglichkeiten der Datenbank GEFAHRGUT und des Gefahrgutdatenservices die Notwendigkeit der Kennzeichnung der Umweltgefahr zu ermitteln T2 - Münchner Gefahrguttage 2023 CY - Munich, Germany DA - 15.05.2023 KW - Datenbank KW - Fachinformationssystem KW - Gefahrgut KW - Kennzeichnung KW - Umweltgefahr KW - Dangerous goods KW - Database KW - Environmentally hazardous substance KW - Labelling KW - Specialised information system PY - 2023 AN - OPUS4-57531 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zekhnini, Khalid A1 - Ebell, Gino A1 - Burkert, Andreas T1 - Corrosion at metallic offshore constructions – Bundesanstalt für Materialforschung und -prüfung (BAM) N2 - In the maritime context of offshore operation, corrosion, in combination with the materials used, poses a particular challenge to ensure safe operation over long indefinite periods and to minimise susceptibility to failure. Until today, only a few corrosion protection systems have proven themselves for the interaction of efficiency, installation, and maintenance in the offshore sector. In addition, available corrosion test methods sometimes have major deficits about conclusions of the durability. Therefore, there is more research and development needed. The flagship project H2Mare of the Federal Ministry of Education and Research aims to enable the production of green hydrogen and PtX products at high seas. Research is being driven forward by the partners in four individual projects, where BAM is involved in two. In PtX-Wind, major kinds of corrosion attacks at offshore constructions are characterized and investigated, and suitable corrosion protection measures determined. In TransferWind, attention focusses on transferring scientific results into standardization. This poster at the H2Mare Conference 2023 presents an overview of the investigation methods and contribution of the department “Corrosion and Corrosion Protection”. T2 - H2Mare Conference 2023 CY - Frankfurt/Main, Germany DA - 12.06.2023 KW - Atmospheric Corrosion KW - Sea Water KW - Corrosion Testing KW - Offshore KW - Laboratory Container KW - Corrosion protecting system PY - 2023 AN - OPUS4-57838 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sunkavalli, Viswa Ratnasri A1 - Strangfeld, Christoph A1 - Maack, Stefan T1 - Thickness Measurements of Polyamide Specimens using Fluidic Oscillator as a Frequency Modulated Air-Coupled Ultrasonic Transducer N2 - Ultrasonic inspection, especially contact and immersion methods, have become established techniques for non-destructive testing in civil engineering (NDT-CE). However, the requirement for coupling agents renders these methods cumbersome in practice due to the potential for surface defacement and an arduous measurement process. Consequently, air-coupled ultrasonic transducers have been proposed as an alternative to address these concerns. These (alternatives), however, come with their own challenges, such as a significant impedance mismatch between the air and the specimen as well as the susceptibility of time of flight (TOF) measurements to ambient conditions. Recently, fluidic oscillators have been developed for in-air sound generation to alleviate impedance mismatch and improve the overall robustness, which is an important consideration of NDT-CE applications. The advantage of fluidic oscillators lies in their ability to generate an ultrasonic signal via oscillating air jet excited by a self-actuated fluctuation. Using air as the operating medium provides a supplementary benefit of lowering measurement durations in addition to a substantial drop in acoustic impedance losses with air acting both as an actuation as well as a coupling medium. Thus, TOF measurements using such fluidic transducers are expected to enable faster characterization of specimen parameters. In that regard, material characterization of polyamide is carried out using ultrasound generated by fluidic devices. Additionally, the mass flow rate of the operating fluid is observed to have a significant effect on the frequency of the fluidic oscillator. Accordingly, the frequency of the oscillation is modulated by varying the supply pressure, leading to a varying flow rate, which in turn facilitates a robust and reliable assessment of the TOF through the material by the generated chirp signals. Furthermore, such frequency modulations effectively improve the signal-to-noise ratio (SNR). Along with a comprehensive study of these new fluidic transducers, preliminary measurement findings are presented, including the material characterization of polymers using air-coupled, frequency-modulated ultrasound. T2 - European Conference on Non-Destructive Testing (ECNDT) CY - Lisbon, Portugal DA - 03.07.2023 KW - Air coupled ultrasound KW - Fluidic actuator PY - 2023 AN - OPUS4-57940 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - Dual-functionality of WS-COTDR for ground movement monitoring N2 - Wavelength scanning coherent optical time domain reflectometer (WS-COTDR) is a good candidate to spatially resolve the environmental information at comparatively low frequency. This paper reveals it can also work as a traditional optical time domain reflectometer (OTDR) to identify Fresnel reflection by averaging the obtained signal over the wavelength scanning range. Simultaneous distributed vibration sensing and a traditional OTDR measurement are experimentally demonstrated using the WS-COTDR system. T2 - European Workshop on Optical Fibre Sensors (EWOFS 2023) CY - Mons, Belgium DA - 23.05.2023 KW - Distributed fiber sensing KW - Acoustic sensing KW - Structural health monitoring PY - 2023 AN - OPUS4-57591 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kanzler, D. A1 - Schmitt, M. A1 - Maack, Stefan A1 - Baensch, F. T1 - Erarbeitung einer Norm für einen standardisierten Prozess zur probabilistischen Bewertung von Prüfverfahren N2 - Im DIN-Normenausschuss Materialprüfung (NMP) wurde das Normungsgremium NA 062-08-28 AA „Qualifizierung von zerstörungsfreien Prüfungen“ reaktiviert. Das Ziel der Reaktivierung ist die Erarbeitung einer Norm für einen standardisierten Prozess zur probabilistischen Bewertung von Prüfverfahren. In der zerstörungsfreien Prüfung (ZfP) führt die Ermittlung von Mess- / Prüfunsicherheiten von Prüfverfahren, in normativer Hinsicht in Deutschland und Europa, noch ein Schattendasein. Die Norm ISO IEC 17025 und auch der VDA-Band 5 wurden weiter in Richtung Messunsicherheit entwickelt, allerdings führt ihre Anwendung in der ZfP zu Problemen. Der Arbeitsausschuss NA 062-08-28 AA soll hier den Brückenschlag zwischen Messunsicherheit, objektiver statistischer Bewertung für ZfP-Verfahren und eine weitere Stärkung der probabilistischen Bruchmechanik erreichen. Geplant ist daher die Erarbeitung einer DIN-Norm, welche die Kriterien für eine korrekte Versuchsplanung, ein praktikables Vorgehen zur Bewertung der Prüfergebnisse und die mathematische Überführung in eine Zuverlässigkeitsaussage enthält. Es soll ein Leitfaden erstellt werden, der für ein möglichst breites Branchenspektrum eingesetzt werden kann, unabhängig von den Besonderheiten verschiedener Industriezweige. Dargestellt werden das relevante Normungsgremium sowie der Hintergrund des zu erstellenden Dokuments. T2 - DACH-Jahrestagung 2023 CY - Friedrichshafen, Germany DA - 15.05.2023 KW - Validation KW - Normung KW - Probability of Detection PY - 2023 AN - OPUS4-58344 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eiben, Mario T1 - Die Aufgaben der BAM als zuständige Behörde im Gefahrgutbereich in Deutschland N2 - Die BAM ist zuständige Behörde in Deutschland für bestimmte Aufgaben im Gefahrgutbereich, die u. a. in § 8 der Gefahrgutverordnung Straße, Eisenbahn und Binnenschifffahrt (GGVSEB) und § 12 der Gefahrgutverordnung See (GGVSee) aufgeführt sind und hauptsächlich von den Abteilungen 2 und 3 wahrgenommen werden. So ist die BAM bspw. die in Deutschland für die Zulassung von Verpackungen und Tanks oder auch die Einstufung bestimmter gefährlicher Güter zuständige Stelle. Die BAM arbeitet des Weiteren als Kompetenzbehörde national und international in den entsprechenden Gremien mit und berät das BMDV in der Rechtsfortentwicklung der internationalen Vorschriften für den Gefahrguttransport. Dies geschieht u. a. durch die Mitarbeit im Ständigen Ausschuss Gefahrgutbeförderung (AGGB) des Gefahrgut-Verkehrs-Beirats beim BMDV und den zugehörigen Arbeitsgruppen, oder auch das Erstellen von Anträgen für Rechtsänderungen in den internationalen Vorschriften der Vereinten Nationen (UN) bzw. der Wirtschaftskommission für Europa der UN (UNECE) im Auftrag des BMDV. Die Beratung der betroffenen Wirtschaft und die Normungsarbeit sind weitere wichtige Themen. Die Expertise der BAM wird insbesondere durch Forschung im Gefahrgutbereich erhalten und weiter ausgebaut. Im Rahmen des Vortrags werden drei Forschungsbereiche vorgestellt, von denen zwei für die Energiewende von großer Bedeutung sind. T2 - 10. Deutsche Gefahrgut-Sicherheitstage CY - Nürburg, Germany DA - 13.09.2023 KW - Gefahrgut KW - Zuständige Behörde KW - Transport gefährlicher Güter KW - Gremienarbeit KW - Normung KW - Forschung KW - Gesetzliche Aufgaben PY - 2023 AN - OPUS4-58350 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Karapanagiotis, Christos A1 - Krebber, Katerina T1 - Machine learning for strain, temperature and humidity discrimination in Brillouin optical frequency domain analysis N2 - We propose to our knowledge for the first time an ensemble of probabilistic machine learning models for strain, temperature and humidity discrimination in Brillouin optical frequency domain analysis (BOFDA) applying a two-fiber configuration. T2 - 28th International Conference on Optical Fiber Sensors CY - Hamamatsu, Japan DA - 20.11.2023 KW - Multiparameter sensing KW - Fiber optic sensors KW - Machine learning KW - Structural health monitoring PY - 2023 AN - OPUS4-59396 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Farahbakhsh, Mahin A1 - Simon, Katja A1 - Eiben, Mario A1 - Damm, David A1 - Tscheuschner, Frank A1 - Stahl, Michael T1 - Fachinformationssystem Datenbank GEFAHRGUT N2 - Es werden die Anwendungen des Gefahrgutdatenpools der BAM aufgezeigt, der ein zentrales Informationssystem für den Transport gefährlicher Güter darstellt. T2 - 19. Gefahrgut-Technik-Tage Berlin CY - Berlin, Germany DA - 16.11.2023 KW - BAM-Liste KW - Datenbank GEFAHRGUT KW - Gefahrgut-Schnellinfo KW - Gefahrgutdatenpool KW - Gefahrguttransport KW - Informationssystem KW - Kurzinfo KW - Modul für Beförderungspapier KW - Modul für radioaktive Stoffe KW - BAM List KW - Dangerous Goods Database KW - Dangerous Goods Quickinfo KW - Radioactive Materials Module KW - Transport Documents Module PY - 2023 AN - OPUS4-59106 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Farahbakhsh, Mahin A1 - Simon, Katja A1 - Eiben, Mario A1 - Damm, David A1 - Tscheuschner, Frank A1 - Stahl, Michael T1 - Fachinformationssystem Datenbank GEFAHRGUT - Hilfe bei der Kennzeichnung der Umweltgefahr N2 - Möglichkeiten der Datenbank GEFAHRGUT und des Gefahrgutdatenservices die Notwendigkeit der Kennzeichnung der Umweltgefahr zu ermitteln. T2 - 19. Gefahrgut-Technik-Tage Berlin CY - Berlin, Germany DA - 16.11.2023 KW - Datenbank KW - Fachinformationssystem KW - Gefahrgut KW - Kennzeichnung KW - Umweltgefahr KW - Dangerous goods KW - Database KW - Environmentally hazardous substance KW - Labelling KW - Specialised information system PY - 2023 AN - OPUS4-59107 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lengas, Nikolaos A1 - Müller, Karsten A1 - Schlick-Hasper, Eva A1 - Neitsch, Marcel A1 - Johann, Sergej A1 - Zehn, M. W. T1 - FEA of the mechanical response of installed impact target foundations in drop tests of dangerous goods packagings N2 - Packagings for the transport of dangerous goods need to meet special requirements to get an approval. This includes free fall drop testing onto an essentially unyielding surface as a means to assess a package’s resistance to mechanical damage. A main requirement for drop tests is that the impact target’s mass shall be at least 50 times that of the heaviest package to be tested. Nevertheless, many manufacturers do not possess foundation structures with the required mass ratio. Previous evidence highlights that the mass ratio is not a decisive criterion on its own. Parameters such as the impact target foundation’s connection and the impulse experienced by the impacting object are essential as well. However, these factors are not easily verifiable since experimental measurements are not possible at most facilities. The objective of this work is to provide a detailed analysis on the interaction between impact target foundation and subgrade in dynamic impact testing using validated finite-element (FE) models. This research is highly beneficial for industrial application since it allows manufacturers to make informed predictions about the mechanical response of installed impact target foundations. T2 - FEMS EUROMAT 2023 CY - Frankfurt a. M., Germany DA - 03.09.2012 KW - Dangerous goods packagings KW - Drop test KW - Foundation KW - Structural dynamics PY - 2023 AN - OPUS4-58213 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Costard, René A1 - Agasty, Amit T1 - Dynamic response of reinforced concrete (RC) components in scaled-down blast tests N2 - Der Beitrag präsentiert erste Ergebnisse aus dem BAM-internen Projekt AP5 Security zum Thema Charakterisierung der dynamischen Reaktion und Schädigung von Stahlbetonbauteilen. T2 - 44.Informationstagung Sprengtechnik CY - Siegen, Germany DA - 14.04.2023 KW - Explosionsbelastung auf Strukturen KW - Beton KW - Numerik PY - 2023 AN - OPUS4-57313 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Küttenbaum, Stefan T1 - ZfPStatik - Verbesserte Beurteilung von Bestandsbauwerken N2 - Vorgestellt werden - die Projektziele - das Konsortium - die allgemeine Vorgehensweise - und aktuelle Fortschritte im WIPANO-Projekt "ZfPStatik" (Stand: Februar 2023). T2 - 3. vierteljährliche Versammlung des Projektkonsortiums CY - Neubiberg, Germany DA - 07.02.2023 KW - Zerstörungsfreie Prüfung KW - Nachrechnung KW - Zuverlässigkeitsbewertung KW - Bestandsbauwerke PY - 2023 AN - OPUS4-57239 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sunder, S. A1 - Jauregui Rozo, Maria A1 - Schartel, Bernhard A1 - Ruckdäschel, H. T1 - Microstructure analysis and mechanical characterization of flame-retardant epoxy resins transferred to glass fiber composites via prepregs N2 - The transfer of flame-retardant epoxy resin formulations to composites for structural and lightweight applications in the energy and transport sector can be complex and requires systematic investigation. Here, uncoated and silane-coated ammonium polyphosphate (APP, Si-APP) intumescent compounds are transferred to prepregs using a Bisphenol A diglycidyl ether (DGEBA) resin matrix to 0/90o bidirectional glass fibers with an aerial weight of 600 g/m2. Inorganic silicates (InSi) are added to improve the fire residues of the composites after combustion and the total amount of flame retardants in the resin formulations was 10% by weight. The prepregs' fiber volume content (FVC) is corroborated using in-process measurements and thermogravimetric analysis. This was found to be approximately 60% for the composites containing APP, which is ideal for load-bearing applications with high mechanical strength. However, the Si-APP containing prepregs showed an inconsistent FVC potentially due to interactions with the commercial sizing of the glass fibers. The composites subsequently prepared are analysed for potential filtration effects of the additives via SEM after immobilization in a cured resin and platinum sputtering. The inter-laminar shear strength and the mechanical strength of the composites are compared via three-point bending tests. Additionally, the fire performance of the composites is analysed using cone calorimetry. It was found there was minimal impact of the loading of the flame retardants on the delamination of the composites and the flexural strength. However, the high density of the glass fibers possibly results in a suppression of the mode of action of the flame retardants in the composites. Therefore, the fire residues of the composites are further compared using SEM, and the flame-retardant modes of action upon transfer are investigated. T2 - FEMS EUROMAT 23 CY - Frankfurt am Main, Germany DA - 03.09.2023 KW - Lightweight construction KW - Flame retardancy KW - Composites PY - 2023 AN - OPUS4-59136 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jauregui Rozo, Maria A1 - Sruthi, Sunder A1 - Ruckdäschel, Holger A1 - Schartel, Bernhard T1 - Transfer of the modes of action from polymer materials to glass-fiber-reinforced plastics: flame retardancy – fire resistance – post-fire mechanics N2 - Fire resistance of fiber-reinforced polymers (FRPs) has been an important area of research for many years since FRPs are mainly used in the transportation and construction sectors. This study presents the fire behavior, and mechanical performance between the flame retarded pure epoxy resin and flame retarded glass-fiber composites before, during, and after a fire event. This enables a deeper understanding of the transferability of flame retardants on composite materials. T2 - 19th European Meeting on Fire Retardant Polymeric Materials (FRPM23) CY - Dübendorf, Switzerland DA - 26.06.2023 KW - Glass-fiber Reinforced Polymer KW - Flame Retardancy KW - Fire Behavior KW - Flammability KW - Modes of Action PY - 2023 AN - OPUS4-57846 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sunder, S. A1 - Jauregui Rozo, Maria A1 - Schartel, Bernhard A1 - Ruckdäschel, H. T1 - Adapting intumescent/low-melting glass flame-retardant formulations for transfer to glass-fiber-reinforced composites and post-fire mechanical analysis N2 - The residual post-fire mechanical properties of fiber-reinforced epoxy composites are influenced by their fire residues after burning. This study uses intumescent/low-melting glass flame retardants to tailor fire residues in epoxy resin. Processibility of prepregs and their quality are analysed for transfer of the flame-retardant epoxy resins to layered glass-fiber reinforced composites. Minimal effects were found on the pre-fire flexural strengths of the composites due to low loading of the flame retardants. However, when transferred to glass-fiber reinforced composites, the fire residues diminish significantly. Further studies are required to improve theoretical and experimental estimations of the post-fire mechanics of the composites. T2 - SAMPE Europe Conference 2023 CY - Madrid, Spain DA - 03.10.2023 KW - Composites KW - Flame retardancy KW - Lightweight KW - Post fire mechanics KW - Intumescent PY - 2023 AN - OPUS4-59137 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jauregui Rozo, Maria A1 - Sunder, S. A1 - Ruckdäschel, H. A1 - Schartel, Bernhard T1 - Transfer of the Flame Retardancy and Post-Fire Mechanics from Polymer Materials to Glass-Fiber-Reinforced Plastics N2 - This study presents the processability, fire behavior, and mechanical performance between the flame retarded pure epoxy resin and flame retarded glass-fiber-reinforced plastic before, during, and after a fire event. This enables a deeper understanding of the transferability of flame retardants, modes of action, char enhancement, and flame inhibition on composite materials T2 - Twenty-third international conference on composite materials (ICCM23) CY - Belfast, United Kingdom DA - 31.07.2023 KW - Glass-Fiber Reinforced Polymer KW - Flame Retardancy KW - Mechanical Testing KW - Epoxy Resin KW - Modes of Action PY - 2023 AN - OPUS4-58086 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tabaka, Weronika A1 - Schartel, Bernhard T1 - Bench-scale fire stability testing - Protective layers in carbon fibre reinforced polymer laminates N2 - Fire resistance testing of components made of carbon fibre reinforced polymers (CFRP) composites usually demands intermediate-scale or full-scale testing. In this study, a bench-scale test is presented as a practicable and efficient method to assess the improvement in structural integrity of CFRP with different protective interlayers during fire. T2 - International Conference on Composite Materials (ICCM23) CY - Belfast, UK DA - 30.07.2023 KW - Fire resistance KW - Bench-scale testing KW - Carbon fibre reinforced polymer composite PY - 2023 AN - OPUS4-58099 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goller, Sebastian M. A1 - Krüger, Simone A1 - Schartel, Bernhard T1 - How reactions between smoke suppressants in flame retardant PA6.6 change the burning behavior and smoke emission N2 - The interactions between polymer, flame retardant and smoke suppressant are presented. Moreover, it is discussed, how the molecular changes affect the fire behavior and the smoke emission. T2 - 19th European meeting on Fire Retardant Polymeric Materials (FRPM23) CY - Dübendorf, Switzerland DA - 26.06.2023 KW - Smoke KW - Polyamide KW - Flame retardancy KW - Smoke suppressant KW - Fire behavior PY - 2023 AN - OPUS4-57845 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wu, Hongyi A1 - Christiani, Ricardo A1 - Hofmann-Böllinghaus, Anja T1 - Untersuchung von Brandausbreitungsmechanismen bei Waldbränden N2 - Das EU Projekt TREEADS „A Holistic Fire Management Ecosystem for Prevention, Detection and Restoration of Environmental Desasters” beschäftigt sich mit der Erforschung der drei Phasen „Prävention und Bereitschaft“, „Detektion und Reaktion“ und „Aufforsten und Anpassen“ der Waldbrandverhütung. Im Projekt gibt es acht ausgewiesene Pilotregionen, in denen Deutschland auch mit einer Pilotregion in Sachsen-Anhalt bzw. in Brandenburg vertreten ist. Unsere Arbeit auf Charakterisierung des Waldbodens und numerische Simulation wird vorgestellt. T2 - vfdb-Jahresfachtagung 2023 CY - Münster, Germany DA - 15.05.2023 KW - Waldbrand KW - Klimawandel KW - Charakterisierung des Waldbodens KW - Numerische Strömungsmechanik PY - 2023 AN - OPUS4-57621 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -