TY - JOUR A1 - Salzmann, Christoph A1 - Heilmann, Maria A1 - Pellegrino, Francesco A1 - Durand, Bénédicte A1 - Taché, Olivier A1 - Zurutuza, Amaia A1 - Hodoroaba, Vasile-Dan T1 - Ongoing International Interlaboratory Comparisons on Size, Shape and (Relative) Concentration of Complex Nanoparticles under the Pre-Standardization Platform of VAMAS N2 - An overview with the basics of size and shape measurement of particles and 2D structures according to established methodologies (and popular imaging processing software packages) with imaging techniques is given. Main descriptors are explained based on case studies with ongoing interlaboratory comparisons under the pre-standardisation platform of VAMAS. KW - VAMAS KW - Interlaboratory comparison KW - Imaging KW - Size distribution KW - Particle concentration KW - 2D materials PY - 2024 DO - https://doi.org/10.1093/mam/ozae044.319 VL - 30 IS - Supplement 1 SP - 669 EP - 670 PB - Oxford University Press (OUP) AN - OPUS4-61183 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radnik, Jörg T1 - Methodological Challenges and Gaps: Physico-Chemical Characterisation N2 - The methodological challenges and gaps in the physico-chemical characterisation of graphene related 2D Materials (GR2M) are discussed. Solutions for filling the gaps are presented. T2 - OECD Graphene Expert Workshop CY - Paris, France DA - 26.11.2024 KW - Graphene related 2D materials KW - Structure activity relationsships KW - Classification PY - 2024 AN - OPUS4-61920 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stargardt, Patrick A1 - Bresch, Sophie A1 - Falkenberg, Rainer A1 - Mieller, Björn T1 - Effect of Reaction Layers on Internal Stresses in Co‐Fired Multilayers of Calcium Manganate and Calcium Cobaltite N2 - A widespread recovery of waste heat requires a cost‐effective production of thermoelectric generators. Thermoelectric oxides are predestined for use at high temperatures. For manufacturing reasons, a multilayer generator design will be easily scalable and cost‐effective. To evaluate the potential of ceramic multilayer technology for that purpose, a multilayer of the promising thermoelectric oxides calcium cobaltite (Ca3Co4O9), calcium manganate (CMO, CaMnO3), and glass–ceramic insulation layers is fabricated. Cracks and reaction layers at the interfaces are observed in the microstructure. The compositions of these reaction layers are identified by energy‐dispersive X‐ray spectroscopy and X‐ray diffraction. Mechanical and thermal properties of all layers are compiled from literature or determined by purposeful sample preparation and testing. Based on this data set, the internal stresses in the multilayer after co‐firing are calculated numerically. It is shown that tensile stresses in the range of 50 MPa occur in the CMO layers. The reaction layers have only a minor influence on the level of these residual stresses. Herein, it is proven that the material system is basically suitable for multilayer generator production, but that the co‐firing process and the layer structure must be adapted to improve densification and reduce the tensile stresses in the CMO. KW - Ceramic multilayers KW - Co-firings KW - Internal stresses PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601626 DO - https://doi.org/10.1002/pssa.202300956 SP - 1 EP - 9 PB - Wiley VHC-Verlag AN - OPUS4-60162 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Duffner, Eric A1 - el Dsoki, Chalid A1 - John, Sebastian A1 - Schmidt, Anita A1 - Mair, Georg W. A1 - Loechner, Derek A1 - Drousch, Björn T1 - Sicherheitstechnische Bewertung thermischer Betriebsbelastung auf sicherheitskritische Ausrüstung am Beispiel von Composite-Atemluftflaschen und Lithiumbatterien N2 - Ziel des Vorhabens war es, den Einfluss der realen Temperaturbelastung auf Atemschutzflaschen und Lithiumbatterien in Funkgeräten (FG) im Löscheinsatz von Rettungskräften zu ermitteln und deren Auswirkung auf die Alterung und Lebensdauer sowie die potenziellen Gesundheitsgefahren bei deren Nutzung besser beurteilen zu können und Handlungshilfen abzuleiten. Im Rahmen dieses Vorhabens wurden zum einen unterschiedlich thermisch gealterte Composite-Atemluftflaschen systematisch hinsichtlich ihrer Restfestigkeiten untersucht. Zum anderen wurden Lithiumbatterien aus FG hinsichtlich der Einwirkung von kritischen Temperaturen untersucht, ab denen es zu einem thermischen Durchgehen der Batterien kommen kann. Für diese beiden wichtigen Komponenten, Lithiumbatterien und Composite-Atemluftflaschen, wurden kritische Temperatur-Zeit-Profile ermittelt, die Auswirkungen durch geeignete Methodiken untersucht und die sich ergebenden Gefährdungen für den Träger bewertet. Als Methodische Vorgehensweise wurden durch Realversuche die tatsächlichen und zuvor durch Literatur-recherche ermittelten Temperaturprofile verifiziert und auf deren Grundlage die Laborbelastungen abgeleitet. Um den Eigenschaften der aus Faserverbundwerkstoffen hergestellten Composite-Atemluftflaschen Rechnung zu tragen, wurden an zwei repräsentativen Baumustern unterschiedlicher Hersteller Stichprobengruppen unterschiedlicher thermischer Belastung ausgesetzt und hinsichtlich ihrer verbleibenden Restfestigkeitsabnahme geprüft und mit thermisch unbelasteten Baumustern verglichen. Neben den statischen Berstversuchen wurden auch kombinierte Alterungs- und Restfestigkeitsuntersuchungen an zyklisch belasteten Behältern durchgeführt. Die FG wurden thermisch sowohl statischen als auch zyklischen Belastungen ausgesetzt und mit Kapazitätsmessungen begleitet. Die statischen Versuche dienten dem Zweck, die maximale thermische Belastbarkeit der Akkus zu ermitteln, bei der noch kein Versagen auftritt. Bei den zyklischen Versuchen wurde der Temperaturverlauf bei Löscheinsätzen so nah wie möglich im Labor nachgestellt. Hierbei wurden die Akkus wiederholt einem Belastungsprofil mit konstanter Temperatur ausgesetzt und nach einigen Intervallen die Restkapazitäten am Akku gemessen und so die Degradation bestimmt. Als Fazit der im Rahmen dieses Vorhabens durchgeführten Untersuchungen an zwei repräsentativen Baumustern von Atemschutzflaschen kann gefolgert werden, dass die thermischen Belastungen abhängig vom Baumuster einen z.T. deutlichen Einfluss auf die Restfestigkeiten der Atemschutzflaschen haben. Höhere thermische Exposition ist, zumindest an den untersuchten Atemschutzflaschen, deutlich zu erkennen und die Flaschen können durch die zuständigen Gerätewarte leicht ausgesondert und ersetzt werden. Die thermischen Belastungen, wie sie im Rettungseinsatz auftreten, waren für die untersuchten Atemschutzflaschen und die Rettungskräfte nicht kritisch sind. Die langjährige Erfahrung etablierter Hersteller dürfte hier aber nicht ohne Einfluss sein. Es ist somit kein Grund erkennbar, von der Verwendung der leichteren Typ 4 Atemschutzflaschen abzuraten, wenn Atemschutzflaschen, die visuell erkennbare thermische Einwirkungen (Farbänderungen, Materialschmelzungen o.ä.) aufweisen, unmittelbar ersetzt werden. Die Ergebnisse an den FG zeigen, dass trotz hoher Temperaturen keine Selbstentzündung der Lithiumbatterien ausgelöst wird. Der Kapazitätsverlust der Batterien infolge der Belastung führt ebenfalls nicht zu einem Funktionsausfall. Es konnte gezeigt werden, dass die Kapazitätsbestimmung als zuverlässiges und geeignetes Kriterium für die Sicherheitsbewertung der Akkus herangezogen werden kann, wenn die Kapazitätsmessung bei gleichbleibenden Bedingungen (gleiche Raumtemperaturen, gleiche Messgeräte, etc.) stattfindet. Es wird empfohlen, die Akkus ab einer Restkapazität von unter 80% zu tauschen. Als schnelle und sehr einfache Überprüfung kann eine Sichtprüfung an den FG stattfinden. Die im Projekt verwendeten FG zeigten eine Verformung der Kunststoffhülle bei zu hohen Belastungen. N2 - The aim of the project was to determine the influence of the real temperature load on breathing apparatus cylinders and Lithium batteries in radio devices in firefighting operations by rescue services and to be able to better assess their effect on ageing and service life time as well as the potential health hazards and to derive guidelines for action. As part of this project, composite breathing air cylinders that had undergone different thermal ageing processes were systematically analysed with regard to their residual strength. as a second use case, lithium batteries used in radio devices were analysed with regard to the effect of critical temperatures above which thermal runaway of the batteries can occur. Critical temperature-time profiles were determined for these two important components, lithium batteries and composite breathing air cylinders, the effects for the user were analysed using suitable methods and the resulting hazards for the wearer were assessed. As a methodical approach, the actual temperature profiles previously determined by literature research were first verified in real tests and the laboratory loads were derived on this basis. In order to take into account the properties of composite breathing air cylinders made of fibre composites, sample groups were subjected to different thermal loads and examined with regard to their residual strength reduction and in comparison to thermally unloaded samples from two representative samples from different manufacturers. In addition to the static burst tests, combined ageing and residual strength tests were also carried out on cyclic loaded cylinders. The radio devices were subjected to both static and cyclic thermal loads with accompanying capacity measurements. The purpose of the static tests was to determine the maximum thermal load capacity of the batteries at which no failure occurs. In the cyclic tests, practical conditions were simulated as closely as possible in the laboratory. For this purpose, the batteries were repeatedly subjected to a load profile at a constant temperature and the residual capacity of the battery was measured after several intervals to determine the degradation. As a conclusion of the tests carried out on two representative types of breathing apparatus cylinders as part of this project, it can be concluded that the thermal loads have a sometimes significant influence on the residual strength of the breathing apparatus cylinders, depending on the type. Higher thermal exposure is clearly recognizable, at least on the breathing apparatus cylinders tested, and the cylinders can be easily remove and replaced by the responsible equipment maintainers. The thermal loads that occur during rescue operations were not critical for the tested breathing protection cylinders and the rescue teams. However, the many years of experience of established manufacturers should not be without influence here. There is therefore no reason to advise against the use of the lighter Type 4 breathing protection breathing apparatus cylinders if cylinders with visually recognizable thermal effects (color changes, material melting, etc.) are replaced immediately. The results on the radio devices showed that determination of the capacity can serve as a suitable criterion for the safety assessment for the batteries. The loss of capacity of the batteries as a result of the load also does not lead to a functional failure. The capacity determination can be used as a reliable and suitable criterion for the safety assessment of the batteries if the capacity measurement is carried out under constant conditions (same room temperatures, same measuring devices, etc.). It is recommended to replace the batteries when the remaining capacity is below 80%. A visual inspection of the radio devices can be carried out as a quick and very simple check. The radio devices used in the project showed deformation of the plastic casing when subjected to excessive loads. KW - Composite KW - Atemluftflaschen KW - Litiumbatterien KW - Funkgeräte KW - Thermische Belastung KW - Rettungskräfte KW - Feuerwehr KW - PSA KW - DGUV PY - 2024 UR - https://www.dguv.de/ifa/forschung/projektverzeichnis/ff-fp0462.jsp N1 - Abschlussbericht zum Vorhaben mit der Projekt-Nr. FF-FP 0462 (CoLiBri), Laufzeit 01.03.2021–29.02.2024, Bericht vom 15.04.2024 SP - 1 EP - 66 PB - Deutsche Gesetzliche Unfallversicherung (DGUV) CY - Berlin AN - OPUS4-59877 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Naumann, Kathrin A1 - Tichter, Tim A1 - Nielsen, Rasmus S. A1 - Seger, Brian A1 - Hansen, Ole A1 - Chorkendorff, Ib A1 - Vesborg, Peter C. K. T1 - Protection Materials on III–V Semiconductors for Photoelectrochemical CO Reduction N2 - Tantalum oxide (TaOx) and amorphous titanium dioxide (TiO2) are employed as protection materials for commercial GaInP/GaAs/Ge triple-junction solar cells to facilitate the unbiased photoelectrochemical reduction of carbon monoxide on nanostructured copper particles. It has been found that a photoelectrode protected by a 150 nm-thick layer of TiO2, capped with 8 nm TaOx, and decorated with copper nanocubes in the size of 150 nm can successfully drive the photoelectrochemical conversion of carbon monoxide to ethylene. Implemented into a photoelectrochemical flow reactor, which continuously supplies the active interface with CO-saturated electrolyte, the device achieves a faradaic efficiency of 24% under AM1.5G conditions. Direct attachment of the copper nanocubes to a protection layer of TiO2 in the absence of TaOx results in a strong hydrogen evolution reaction (HER) and no CO reduction products are found. This unexpected loss in selectivity is studied via post-operando X-ray photoemission spectroscopy and ion-scattering spectroscopy. No modifications in the redox state of TiO2 orsigns of H intercalation are found, while the preferential redeposition of small Cu nanoparticles is considered possible. This increasein HER appears specific for TiO2, as additional, purely electroanalytical experiments using tantalum oxide or carbon as a support layer for Cu nanocubes can produce ethylene effectively. KW - Photoelectrochemistry KW - Carbon Monoxide Reduction KW - Protection Material KW - Multi‐junction KW - Copper Catalyst PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-618712 DO - https://doi.org/10.1021/acs.jpcc.4c04782 SP - 1 EP - 10 PB - American Chemical Society (ACS) AN - OPUS4-61871 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Prenner, Stefanie A1 - Part, Florian A1 - Jandric, Aleksander A1 - Bordes, Arnaud A1 - Leonhardt, Robert A1 - Jung-Waclik, Sabine A1 - Huber-Humer, Marion ED - Djebali, Ridha T1 - Enabling Circular Business Models: Preconditions and Key Performance Indicators for the Market Launch of Repurposed Second‐Life Lithium‐Ion Batteries From Electric Vehicles N2 - With the rise of electric vehicles (EVs) and thus lithium‐ion batteries (LIBs), the number of end‐of‐life (EoL) LIBs after their first life in EVs is about to increase significantly. These end‐of‐first‐life (EoFL) EV LIBs still have sufficient energy density for less‐demanding second‐life applications like stationary battery energy storage systems (BESSs) or mobile applications (e.g., forklifts, tools). Repurposing EoFL EV LIBs extends their lifespan, offering sustainability benefits and supporting several United Nations (UN) Sustainable Development Goals (SDGs). However, prevailing market entry barriers, such as high repurposing costs, little information on battery history and aging, or lacking performance indicators, hinder the widespread implementation of second‐life applications. Thus, this study aims to identify preconditions for considering and selecting useful EoFL LIBs and to determine key performance indicators (KPIs) to minimize economic risks for a successful second‐life market launch. KPIs were rated according to importance using a Likert scale, and reference values were introduced. A mixed‐methods approach, using expert interviews, an exploratory workshop, and an online survey, was applied. Twelve important preconditions were identified, with the “availability of information on battery specification” and “compliance with standards and regulations” considered very important. In addition, 12 KPIs were derived, covering six economic, three environmental, and three technical and safety‐related indicators. The KPIs “state of safety (SoS)” and “resource savings (Rsav)” were rated as highly important. Overall, the findings provide performance measurement guidance for repurposing companies, facilitating the market launch and adoption of second‐life applications. Future research can build on these results and investigate variations among different battery types, ultimately promoting a circular economy. KW - Lithium-Ion battery KW - Key performance indicators KW - Circular economy KW - Electric vehicle KW - Sustainability PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-619167 DO - https://doi.org/10.1155/er/8331870 SP - 1 EP - 19 PB - Wiley AN - OPUS4-61916 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Rechtliche Grundlagen und Entwicklungen im Bereich des Transports von Lithiumbatterien N2 - Als zuständige Behörde im Bereich des Transports von Lithiumbatterien und Ressortforschungsanstalt ist die BAM sowohl an der Rechtsfortentwicklung beteiligt als auch an der hierfür benötigten Forschung. Aktuelle Themen, Forschungsprojekte und deren Ergebnisse werden vorgestellt. T2 - 1. Fachkonferenz Transport von Lithiumbatterien CY - Munich, Germany DA - 12.07.2024 KW - LIthiumbatterien PY - 2024 AN - OPUS4-62329 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Prenner, Stefanie A1 - Part, Florian A1 - Jung-Waclik, Sabine A1 - Bordes, Arnaud A1 - Leonhardt, Robert A1 - Jandric, Aleksander A1 - Schmidt, Anita A1 - Huber-Humer, Marion T1 - Barriers and framework conditions for the market entry of second-life lithium-ion batteries from electric vehicles N2 - Transition to circular economy for lithium-ion batteries used in electric vehicles requires integrating multiple stages of the value cycle. However, strategies aimed at extending the lifetime of batteries are not yet sufficiently considered within the European battery industry, particularly regarding repurposing. Using second-life lithium-ion batteries (SLBs) before subsequent recycling can offer several advantages, such as the development of sustainable business models, the reduction of emissions, and alignment with UN Sustainable Development Goals 7, 12, and 13. Using expert and problem-centred interviews along with an exploratory workshop, this study guides stakeholders in the battery sector by illustrating the necessary changes for a more holistic circular economy. Moreover, an extended political, economic, social, technological, environmental, legal, and additionally safety-related (PESSTEL) analysis approach is carried out, which has not yet been used in this context. In this process, barriers, as well as necessary institutional framework conditions and organisational requirements for a successful market entry of SLB applications are investigated. Among others, key barriers relate to the competition with first-life applications and safety concerns. SLBs require high manual labour costs for repurposing, along with expenses for expired warranties and re-certifications. Ownership structures in traditional business models often result in SLBs and their corresponding usage data staying under the control of the manufacturers. Market viability, however, requires a level playing field for both first-life and second-life operators as well as circular battery and data-sharing business models. Gathering data on the ageing performance and performing improved safety testing according to test protocols facilitates the reliable assessment of SLBs. KW - Electric vehicle KW - Circular economy KW - Market entry barrier KW - Repurposing KW - Second-life lithium-ion battery KW - Second-life battery energy storage system PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-614543 DO - https://doi.org/10.1016/j.heliyon.2024.e37423 VL - 10 IS - 18 SP - 1 EP - 15 PB - Elsevier Ltd. AN - OPUS4-61454 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tichter, Tim A1 - Tichter, Alex A1 - Andrae, Dirk A1 - Roth, Christina T1 - Simulating cyclic voltammetry at rough electrodes by the digital-simulation–deconvolution–convolution algorithm N2 - The influence of electrode roughness on diffusional cyclic voltammetry (CV) is investigated from a theoretical perspective. For this purpose, the digital-simulation–deconvolution–convolution (DSDC) algorithm, initially developed for the simulation of CV at porous electrodes, is subjected to three substantial modifications. First, by employing adaptive numerical resolution and sample volumina, the computational demand of the digital simulation (DS) step is reduced significantly. Second, by modifying the Douglas–Gunn algorithm of the DS-step to operate on an arbitrarily incremented spatial grid perpendicular to the macroscopically planar electrode surface, the bulk of the fluid can be treated with an exponentially increasing spatial discretization which uses computational power even more efficiently. The third modification is an optimization of the computationally demanding deconvolution step which is used to extract the mass-transfer function from the data computed in the DS-step. This, initially recursive procedure, is replaced by a three-step sequence consisting of (I) a numerical Laplace transformation (NLT) on an exponentially expanding time-grid, (II) a Laplace-domain integration (LDI) and finally (III) a numerical inversion of Laplace transformation (NILT) using the Gaver–Stehfest (GS) inversion formula. Based on this novel strategy for CV simulation, the effects of electrode roughness are thoroughly investigated. It is demonstrated that for an ideally reversible reaction the effects of electrode roughness on the CV response are insignificant at common experimental timescales. In contrast, for scenarios with electrochemically quasi-reversible (or irreversible) kinetics, the apparent rate constants are allegedly upscaled by the area ratio 𝜓 = 𝐴rough∕𝐴planar . This manifests in a lower peak-to-peak separation without a distortion of the shape of the voltammetric profile. This behavior is finally explained in a quantitative manner in terms of convolution-sums and mass-transfer functions which ultimately puts the parameter electrode roughness into the semianalytical framework of convolutive modeling. KW - Rough electrodes KW - Electrode kinetics and Peak-to-Peak separation KW - Vanadium redox-flow batteries KW - Convolutive modeling KW - Digital-simulation KW - Numerical inversion of Laplace transformation KW - Gaver–Stehfest inversion formula PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-614620 DO - https://doi.org/10.1016/j.electacta.2024.145175 VL - 508 SP - 1 EP - 17 PB - Elsevier B.V. AN - OPUS4-61462 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Lithiumbatterien im Seeschiffsverkehr: lassen sich zukünftig Brände verhindern? N2 - Ausgehend von der Vielzahl an Bränden im Seeverkehr, die Lithiumbatteriebränden zugeschrieben werden, wird betrachtet, wie ein sichererer Transport von Lithiumbatterien im Seeverkehr erfolgen kann und inwiefern die BAM durch Ihre Mitarbeit in der Regelwerksentwicklung und Forschung dazu beiträgt. T2 - KLIB Mitgliederforum CY - Frankfurt am Main, Germany DA - 19.03.2024 KW - Lithiumbatterien KW - Gefahrguttransport KW - Seeverkehr KW - Sicherheit PY - 2024 AN - OPUS4-62324 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - NICOLHy - 1st Stakeholder Advisory Board meeting N2 - The NICOLHy project aims to develop a novel insulation concept based on Vacuum Insulation Panels (VIP) that enables the safe, cost- and energy efficient storage of large quantities of LH2. Such large scale LH2 storage technology is necessary for establishing a hydrogen economy with dimensions between 40.000 m³ and more than 200.000 m³ of LH2. However, new design concepts are needed because the currently available technologies used in small and medium storages today are not suitable for up-scaling. The main problems prohibiting the up-scaling are the long production time due to the process chain, the low failure tolerance and the spherical shape, which reduces the payload in technical applications by up to 50% compared to other shapes. The novel concept will change these conditions by a system which is modular, open-form, time-and cost efficient while production, operation and service, multi-failure tolerant and applicable for onshore and offshore applications. The presentations shows details to the concept and presents several safety concerns the project has to deal with. This document contains all presentations from NICOLHys first Stakeholder Meeting. T2 - NICOLHy 1st Stakeholder Meeting CY - Trondheim, Norway DA - 24.06.2024 KW - Liquefied hydrogen KW - Insulation KW - Tanks PY - 2024 AN - OPUS4-61393 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cano Murillo, Natalia A1 - Balasooriya, Winoj A1 - Theiler, Geraldine T1 - Effect of hydrogen environment on the physical and mechanical properties of elastomers N2 - The development of a robust hydrogen infrastructure poses challenges to materials exposed to high pressurized hydrogen environments. Polymeric materials, which are expected to perform as seals, gaskets, O-rings, hoses among other applications face high risk of damage due to rapid gas decompression (RGD) which might cause operational safety issues. In this study, we intend to assess the effects of a high pressurized hydrogen environment on carbon black filled (CB) elastomers. The materials were exposed to 100 MPa hydrogen atmosphere at room temperature and at 85°C. Ex-situ characterization was performed during the first 30 minutes after decompression and repeated two days after the exposure when total gas desorption has taken place. The physical and mechanical characteristics of the materials were determined by means of density and volume change, hardness and tensile tests, and dynamic mechanical analysis. T2 - EHEC, the European Hydrogen Energy Conference 2024 CY - Bilbao, Spain DA - 06.03.2024 KW - High pressurized Hydrogen KW - Sealing Materials KW - Carbon Black Filled Elastomers PY - 2024 AN - OPUS4-60706 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Theiler, Geraldine A1 - Cano Murillo, Natalia A1 - Halder, Karabi A1 - Balasooriya, Winoj A1 - Hausberger, Andreas A1 - Kaiser, Andreas T1 - Effect of high-pressure hydrogen environment on the physical and mechanical properties of elastomers N2 - This study presents the influence of high-pressure hydrogen environment on the physical and mechanical properties of two types of cross-linked hydrogenated acrylonitrile butadiene rubbers. Based on the CSA/ANSI standard, static exposures in hydrogen experiments were performed up to 100 MPa at 120 °C. Characterization before and after exposure was conducted by means of density and hardness measurements, dynamic mechanical analysis (DMA), tensile tests, compression set, FT-IR and AFM analyses to assess effects after decompression. While the effect of high-pressure exposure is significant immediately after exposure, most of the physical and mechanical properties recover after 48 hours. FT-IR, AFM, SEM and compression set results indicate, however, permanent effects. KW - Hydrogen KW - Mechanical properties KW - Elastomers KW - High-pressure hydrogen environment PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-597102 DO - https://doi.org/10.1016/j.ijhydene.2024.01.148 SN - 0360-3199 VL - 58 SP - 389 EP - 399 PB - Elsevier Ltd. AN - OPUS4-59710 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Theiler, Geraldine A1 - Cano Murillo, Natalia A1 - Hausberger, Andreas T1 - Effect of hydrogen pressure on the fretting behavior of rubber materials N2 - Safety and reliability are the major challenges to face for the development and acceptance of hydrogen technology. It is therefore crucial to deeply study material compatibility, in particular for tribological components that are directly in contact with hydrogen. Some of the most critical parts are sealing materials that need increased safety requirements. In this study, the fretting behavior of several elastomer materials were evaluated against 316L stainless steel in an air and hydrogen environment up to 10 MPa. Several grades of cross-linked hydrogenated acrylonitrile butadiene (HNBR), acrylonitrile butadiene (NBR) and ethylene propylene diene monomer rubbers (EPDM) were investigated. Furthermore, aging experiments were conducted for 7 days under static contions in 100 MPa of hydrogen followed by rapid gas decompression. Fretting tests revealed that the wear of these compounds is significantly affected by the hydrogen environment compared to air, especially with NBR grades. After the aging experiment, the friction response of the HBNR grades is characterized by increased adhesion due to elastic deformation, leading to partial slip. KW - Fretting wear KW - Rubbers KW - Hydrogen KW - High-pressure PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-608462 DO - https://doi.org/10.3390/lubricants12070233 VL - 12 IS - 7 SP - 1 EP - 17 PB - MDPI AN - OPUS4-60846 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tichter, Tim T1 - Simulating diffusional cyclic voltammetry at rough electrodes by means of the DSDC algorithm N2 - Electrode roughness is an exceptionally important, yet oftentimes overlooked factor in electrokinetic analysis and catalyst research. Essentially any electroanalytical experiment involving an electrode with a surface which is not perfectly smooth will be subjected to more or less severe effects of roughness. This includes any circumstance where electrodes are decorated with micro- or nanoparticles and is therefore relevant for a plethora of experimental scenarios. Since the roughness-related gain in surface area scales the reaction rate – and thus the current – it is an inherently non-straightforward task to assess intrinsic electrode kinetics from experimental data of rough structures. In other words, a significant overestimation of kinetic constants may arise when rough electrodes are employed and kinetics are analyzed under the assumption of perfectly planar surfaces. For this reason, it is fundamentally interesting to approach electrode roughness from a purely theoretical point of view, since surface roughness and kinetics can be tuned in a deliberate manner for separating their individual contributions. In this study, we propose a strategy for the simulation of the most common electroanalytical technique – cyclic voltammetry – at mesoscopically rough surfaces. For this purpose, our previously introduced digital simulation - deconvolution - convolution (DSDC) algorithm [1] is employed. By modifying, the Douglas--Gunn algorithm, which is used in the digital simulation step to operate on an arbitrarily incremented spatial grid, a high numerical resolution near the electrode/electrolyte boundary and a larger spatial discretization in the bulk of the electrolyte can be used. This provides a fine resolution of artifacts of surface roughness and efficiently utilizes computational power. As a consequence, simulations can be performed on real-space data of rough electrodes which is obtained from atomic force microscopy (AFM). It is demonstrated that for an ideally reversible reaction the effects of electrode roughness on the CV response are insignificant. In contrast, for practically relevant scenarios with electrochemically irreversible or quasi-reversible kinetics, the apparent rate constants are allegedly upscaled by the area-ratio Arough/Aplanar up to a certain threshold. Qualitatively, this manifests in a lower peak-to-peak separation without a distortion of the shape of the voltammetric profile. As soon as the surface profile becomes much deeper than wide, a distortion of the CV response occurs which is associated with an increasingly finite diffusion domain. This behavior is finally explained in terms of convolution-sums and mass-transfer functions and provides a quantitative interpretation of roughness effects. T2 - Electrochemistry 2024 CY - Braunschweig, Germany DA - 16.09.2024 KW - Rough electrodes KW - Convolutive Modeling KW - Digital Simulation KW - Cyclic voltammetry KW - Redox-Flow Batteries PY - 2024 AN - OPUS4-62308 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Clute, C. A1 - Balasooriya, Winoj A1 - Cano Murillo, Natalia A1 - Theiler, Geraldine A1 - Kaiser, A. A1 - Fasching, M. A1 - Schwarz, Th. A1 - Hausberger, A. A1 - Pinter, G. A1 - Schloegl, S. T1 - Morphological investigations on silica and carbon-black filled acrylonitrile butadiene rubber for sealings used in high-pressure H2 applications N2 - Effects of NBR formulations on properties for high-pressure gas systems were tested. Functionalized silica enhances typical properties to a comparable range like CB. The balance of additives results in suitable RGD performance. Silica filled NBR shows lower H2 uptake compared to non-plasticized CB filled NBR. Morphology of CB filled NBR is less affected by H2 than silica filled grades. KW - High-pressure hydrogen gas KW - Sealing KW - Acrylonitrile butadiene rubber KW - Filler-rubber-interaction KW - Rapid gas decompression (RGD) PY - 2024 DO - https://doi.org/10.1016/j.ijhydene.2024.04.133 SN - 0360-3199 VL - 67 SP - 540 EP - 552 PB - Elsevier Ltd. AN - OPUS4-60559 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Theiler, Geraldine T1 - On the way to sustainable and hydrogen compatible sealing materials N2 - In this contribution, the sliding performance of newly formulated polymer materials with improved sustainability are investigated and compared with conventional materials. Tribological tests were performed in hydrogen at ambient temperature as well as cryogenic medium. The samples were arranged in a pin-on-disk configuration with a flat pin sliding against a rotating austenitic steel disk. The friction and wear mechanisms are described and discussed by means of surface analyses. T2 - PolyTrib 2024 CY - Portoroz, Slowenia DA - 03.10.2024 KW - High-performance polymers KW - Sliding wear KW - Hydrogen KW - Cryogenic PY - 2024 AN - OPUS4-61419 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tichter, Tim T1 - Frühwarnsystem für EV-Batterien: Prädiktion des Thermischen Durchgehens von Lithium-Ionen-Speichern N2 - Kritisch defekte Lithium-Ionen Batterien bergen ein signifikantes Gefährdungspotenzial, da die Möglichkeit eines so genannten thermischen Durchgehens (TD) besteht. Dabei handelt es sich um eine autoamplifizierende Reaktion, welche zu einer unkontrollierten Erwärmung mit Rauch- und Flammenerscheinung oder gar einer Explosion führt. Insbesondere bei großen Batterien mit einer Kapazität von über 100 kWh, stellt ein TD ein sehr großes Schadensereignis dar. Folglich gilt es, dieses Ereignis strikt zu vermeiden. Im Rahmen der Präsentation werden aktuelle Arbeiten der BAM im Bereich der TD-Früherkennung vorgestellt. T2 - Gefahrguttag 2024 CY - Hannover, Germany DA - 19.09.2024 KW - Thermisches Durchgehen KW - Lithium-Ionen Batterien KW - Automotive Anwendungen PY - 2024 AN - OPUS4-62309 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Theiler, Geraldine A1 - Cano Murillo, Natalia A1 - Hashimoto, H. A1 - Aoyagi, A. A1 - Dobbelaar, E. T1 - On the way to sustainable and hydrogen compatible sealing materials N2 - In this contribution, the sliding performance of newly formulated polymer materials with improved sustainability are investigated and compared with conventional materials. Tribological tests were performed in hydrogen at ambient temperature as well as cryogenic medium. The samples were arranged in a pin-on-disk configuration with a flat pin sliding against a rotating austenitic steel disk. The friction and wear mechanisms are described and discussed by means of surface analyses. T2 - PolyTrib 2024 CY - Portoroz, Slowenia DA - 03.10.2024 KW - High-performance polymers KW - Sliding wear KW - Hydrogen KW - Cryogenic PY - 2024 SP - 1 EP - 2 AN - OPUS4-61421 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Natrium-Ionen Batterien N2 - Der Bedarf an Forschung der Bundesoberbehörden zu Natrium-Batterien als neues Thema wurde identifiziert. Hier kann die BAM jedoch bereits zahlreiche Untersuchungen im Rahmen des BAM-internen Projekts "SIB-Links" vorweisen. T2 - BoB Bundes-Oberbehörden CY - Online meeting DA - 10.06.2024 KW - Natrium-Ionen Batterien PY - 2024 AN - OPUS4-62325 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Lithiumbatterien - Transport und Sicherheit N2 - Fachwissen zum Transport und sicherem Umgang mit Lithiumbatterien ist eine essentielle für die Arbeit der Gefahrgutbeauftragten der Polizei. Dabei geht e nicht nur um selbstgenutzte Geräte sondern häufig auch um sichergestellte und möglicherweise beschädigte Geräte / Akkus. Diese müssen bestmöglich vor Datenverlust bewahrt werden, gleichzeitig ist die Sicherheit für die zuständigen Mitarbeiter unabdingbar. Der Vortrag dient dazu, die Zuhörer in die Lage zu versetzen, fallbezogene Entscheidungen für Maßnahmen für den sicheren Umgang und den Transport zu treffen. T2 - Polizeiakademie Niedersachsen Gefahrgutbeauftragte CY - Dannenberg, Germany DA - 10.12.2024 KW - Lithiumbatterien KW - Gefahrguttransport KW - Lagerung PY - 2024 AN - OPUS4-62331 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita A1 - Moench, Lars A1 - Rausch, Talea T1 - Vorstellung des Berichtes Batteriezellenherstellung des Arbeitskreises Elektrische Energiespeichersysteme der Kommission für Anlagensicherheit N2 - In der Kommission Anlagensicherheit (KAS) Arbeitsgruppe Elektrische Energiespeicher wurde ein Bericht erstellt, der den Stand der Technik für die Batteriezellproduktion in Deutschland widerspiegelt und die Einstufung nach Störfallverordnung mittels einer Liste aller enthaltenen Stoffe ermöglicht. Dieser wird vorgestellt und die Anwendung der maßgeblich durch die BAM erstellte Liste erläutert. T2 - UBA Fachbereichgespräch CY - Online meeting DA - 24.10.2024 KW - Störfallverordnung KW - Batterie-Zellproduktion KW - LIthiumbatterien KW - Anlagensicherheit PY - 2024 AN - OPUS4-62327 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai T1 - Vertrauen in Wasserstofftechnologien - Sicherheitsaspekte in der Wasserstoff-Wertschöpfungskette N2 - Wo stehen wir bei Wasserstoff in Sachen Sicherheit? Welche Lücken gibt es aktuell, und wie sind sie zu schließen? Der Weg zur Wasserstoffwirtschaft verlangt die Einführung zahlreicher „neuer“ Technologien in vielen Bereichen. Dies kann aber nur gelingen, wenn Entscheidungsträger und Öffentlichkeit gleichermaßen davon überzeugt sind, dass diese Technologien ausreichend erprobt und sicher sind. Die Sicherheit der Wasserstofftechnologien muss dabei mindestens mit der technologischen Entwicklung Schritt halten - besser noch sie vorwegnehmen - um allzu konservative und kostspielige Sicherheitslösungen zu vermeiden und die praktische Nutzbarkeit und Sicherheit von Wasserstoff zu demonstrieren. Gelingt dies nicht, können schon einzelne sicherheitsrelevante Vorfälle schnell zu Unsicherheiten und erheblichem Vertrauensverlust führen. Im Rahmen einer Webinarreihe des VDMA stellte die BAM vor, wie es aktuell um die Sicherheit in Sachen Wasserstoff bestellt ist, welche konkreten Herausforderungen noch zu bewältigen sind und wie erkannte Lücken geschlossen werden können. T2 - VDMA Power-to-X Webseminar CY - Online meeting DA - 29.10.2024 KW - Wasserstoff KW - Sicherheit KW - Vertrauen KW - Akzeptanz KW - Wertschöpfungskette PY - 2024 AN - OPUS4-61481 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai T1 - Kompetenzzentrum H2Safety – Aktuelle Themen zur Wasserstoffsicherheit N2 - In einer Keynote bei der VDI-Fachkonferenz Wasserstoff 2024: Technische Sicherheit hat die BAM das Kompetenzzentrum H2Safety@BAM sowie verschiedene Arbeiten zum Thema Wasserstoffsicherheit sowie Wissens- und Technologietransfer halten dürfen. Wichtige Kernbotschaften waren allgemein Sicherheitsfragen entlang der Wasserstoff-Wertschöpfungskette, Sicherheit muss von Beginn an bei der Entwicklung einer Technologie berücksichtigt werden und Sicherheitskonzepte müssen mit dem Technologiereifegrad mitwachsen. T2 - VDI-Fachtagung Wasserstoff 2024: Technische Sicherheit CY - Cologne, Germany DA - 24.09.2024 KW - Wasserstoff KW - Sicherheit KW - Wertschöpfungskette KW - Sicherheitskonzepte PY - 2024 AN - OPUS4-61482 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai T1 - Sicherheit von Wasserstofftechnologien - Quo Vadis N2 - Die Sicherheit stellt eine wichtige Säule dar, um Vertrauen in neue Technologien zu gewinnen. Je größer die Zahl an Wasserstoffanwendungen im industriellen Bereich sowie in weiteren Bereichen des öffentlichen Lebens wird, umso mehr steigt die Wahrscheinlichkeit für Zwischenfälle. Die Sicherheit muss mit den Trends der technologischen Entwicklung Schritt halten oder sie besser noch vorwegnehmen. Gleichzeitig gilt es sowohl die Öffentlichkeit als auch insbesondere die Rettungskräfte über die Besonderheiten von Wasserstoff zu informieren, ohne dabei Verunsicherung zu erzeugen. Der Vortrag gibt einen Überblick über aktuelle Entwicklungen und offene Sicherheitsfragen. T2 - 25. Münchner Feuerwehrsymposium CY - Munich, Germany DA - 16.11.2024 KW - Wasserstoffsicherheit KW - Feuerwehr KW - Unfälle PY - 2024 AN - OPUS4-61856 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Jordan, T. A1 - Askar, Enis A1 - Holtappels, Kai A1 - Jopen, M. A1 - Stoll, U. A1 - Reinecke, E.-A. A1 - Krause, U. A1 - Beyer, M. A1 - Markus, D. T1 - Fuels – Introduction | Hydrogen safety N2 - The introduction of hydrogen as a safe energy carrier needs a robust knowledge base, tools for the design and safety assessment of hydrogen technologies built on it, and an internationally harmonized set of standards and regulations. Many of the innovative technologies imply hydrogen at high pressures and/or cryogenic temperatures, with which private users come into contact for the first time in distributed applications. In order to avoid over-conservative, expensive safety solutions, while at the same time demonstrating the usability and safety of hydrogen applications and maintaining acceptance for the technology, safety research must also keep pace with, or better yet anticipate, trends in technological development. Thus, this overview article describes not only the current state of knowledge and technology regarding hydrogen safety, but also its further development. KW - Explosion protection KW - Accidental scenarios KW - Hazard and risk assessment KW - Regulations codes and standards (RCS) KW - Ignition KW - Hydrogen storage KW - Energy carrier PY - 2024 SN - 978-0-1240-9547-2 DO - https://doi.org/10.1016/B978-0-323-96022-9.00195-X VL - 2nd Edition SP - 1 EP - 15 PB - Elsevier B.V. AN - OPUS4-59940 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Namwoonde, Andreas Sheuyange T1 - Polymer Composites Under Continuous and Reciprocating Sliding Conditions In Hydrogen N2 - The implementation of hydrogen as an alternative energy source to fossil fuels necessitates the use of compatible materials for safety purposes, and thermoplastics are widely utilized in this context. The application of polymers in gaseous and liquid hydrogen environments requires careful consideration of their tribological performance, as the operating environment is dramatically different from ambient conditions. Friction, wear, and lubrication are crucial factors to consider in this regard. Researchers have investigated various strategies to enhance the tribological performance of polymers in hydrogen environments, including modifying the composition and structure of polymers by incorporating fillers to improve their friction and wear resistance. The tribological properties of polymer composites based on matrices of PEEK, PPS, and PI have been mostly investigated using the continuous sliding test method, and the results indicate that these materials are suitable candidates for tribological applications in both gaseous and liquid hydrogen. This project explores the tribological properties of related polymer composites in hydrogen using continuous and reciprocating motion with a pin-on-disc testing method. T2 - Polytrib2024 CY - Portorož, Slovenia DA - 03.10.2024 KW - Polymers KW - Friction KW - Wear KW - Tribological behaviour KW - Hydrogen PY - 2024 AN - OPUS4-61378 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grimault de Freitas, Tomás T1 - Hollow Specimen Method for Tests in High-Pressure Hydrogen Gas: The Role of Geometry, Surface Quality and Gas Purity N2 - The hollow specimen technique is a simple and cost-effective method that has the potential to make materials qualification with pressurised gaseous hydrogen widely accessible to academia and industry. The feasibility of this method for slow strain tensile tests has been demonstrated in several studies, leading to the establishment of the ISO/TC 164/SC 1/WG 9 ISO committee for its standardisation. Questions have emerged during this process, that currently prevent the method from being standardised for hydrogen testing. These questions relate to specimen geometry, specimen manufacturing and gas quality and are being systematically addressed in the TransHyDE-H2HohlZug project. The first results are presented in this poster. T2 - TransHyDE Vollversammlung 2024 CY - Leipzig, Germany DA - 27.11.2024 KW - Hydrogen KW - Hydrogen Embrittlement KW - Hollow Specimen Technique KW - High-Pressure Gaseous Hydrogen KW - Austenitic Stainless Steel KW - TransHyDE KW - H2HohlZug PY - 2024 AN - OPUS4-61847 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Konert, Florian T1 - Investigation of the resistance of X65 pipeline steel and weld to gaseous hydrogen using the hollow specimen technique N2 - The constantly increasing demand for renewable energy sources lead to the necessity of transporting large amounts of hydrogen. Since pipelines enable a cost-effective way for the distribution of gaseous hydrogen, the interaction of hydrogen and the pipeline materials must be carefully investigated as hydrogen can cause a degradation of the mechanical properties under certain conditions. Especially welds, which are assumed to be more susceptible to the degradation enhanced by hydrogen, are of great interest. The aim of this study is to investigate the effect of gaseous hydrogen on the mechanical properties of an X65 pipeline, and the longitudinal submerged arc welding (SAW) welded joint. The tests are conducted using the hollow specimen technique on two types of specimens: one extracted from the base material (BM) and the other extracted as a cross-weld (CW) specimen consisting of base material and weld seam. The specimens are charged in-situ under a pressure of 60 bar and tested using slow strain rate (SSR) tensile tests with a nominal strain rate of 10-5 s-1. The performed tests showed a decrease of the reduction of area (RA) from 72% in inert atmosphere to 52% in hydrogen atmosphere for the CW-specimen and a decrease from 73% in inert atmosphere to 51% for the BM. Metallographic analyses showed the crack initiation between fine grain heat affected zone (FGHAZ) and BM for the specimens tested in hydrogen atmosphere as well as for the reference specimens. This leads to the conclusion that the location of the crack initiation does not change due to the presence of gaseous hydrogen. T2 - 77th IIW Annual Assembly and International Conference 2024 CY - Rhodes, Greece DA - 07.07.2024 KW - Hydrogen KW - Hollow-specimen KW - Pipeline steel KW - SSRT KW - Hydrogen embrittlement PY - 2024 AN - OPUS4-60617 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Konert, Florian T1 - The applicability of the hollow specimen technique for testing various metals under high pressure hydrogen atmosphere N2 - The transition to a decarbonised economy will require large amounts of hydrogen over a broad variety of applications. The use of hydrogen poses high safety requirements as hydrogen can be absorbed by metallic materials and result in hydrogen embrittlement under certain condi-tions. For this reason, interactions of gaseous hydrogen and metallic materials are of high sci-entific and industrial interest. Slow strain rate tensile (SSRT) tests are commonly used to evaluate the hydrogen-induced ductility loss of alloys. However, the current standardised test method describes a complex and expensive procedure with limited availability worldwide. The hollow specimen technique promises huge potential for scaling suitable in-situ testing infra-structure and is currently under intensive development in several institutes around the world. As this method has only gained significant attention in the last decade, there are varying interpretations, particularly when testing materials with vastly different mechanical properties. Most available literature focuses on common steels used in hydrogen and natural gas piping systems. The present work provides an overview of the widespread applicability of hollow specimens in evaluating the effect of high-pressure hydrogen on the tensile properties of vari-ous metallic materials. The research presented includes Near-Net shape produced additively manufactured (AM) AISI 316 L, ferritic X65 steel, its weld seam, and solution annealed and hardened 100Cr6 steel. T2 - European Conference on Fracture 2024 CY - Zagreb, Croatia DA - 26.08.2024 KW - Hydrogen KW - Hollow specimen technique KW - SSRT PY - 2024 AN - OPUS4-60912 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Askar, Enis T1 - Safety Issues in connection with electrolyzer systems N2 - In this presentation current and future challenges for the safety of hydrogen technologies are discussed. Furrthermore, the specific hazards for the operation of electrolyzers are shown and finally the trhreshold values (storage and power) for the approval of electrolyzers are presented. T2 - Online Workshop: Regulation on hydrogen thresholds and permitting processes for electrolyzers CY - Online meeting DA - 17.09.2024 KW - Hydrogen technologies KW - Process & plant safety KW - Hydrogen production PY - 2024 AN - OPUS4-61086 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Askar, Enis T1 - BAM - Short Presentation N2 - The activities of the competence center H2Safety@BAM are presented. In more detail the testing facilities at Technical Test Site TTS are shown as well as recent testing activities in the field of hydrogen safety. T2 - 5th In-Person IEA Task 43 Meeting - Safety and RCS of Large Scale Hydrogen Energy Applications CY - Minneapolis, MN, USA DA - 26.09.2024 KW - Explosion protection KW - Consequence analysis KW - H2safety@BAM KW - Living Lab PY - 2024 AN - OPUS4-61746 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Askar, Enis T1 - Safety of Electrolyzers N2 - After a short introduction on the BAM activities, the development of the electrolyzer technology is shown briefly. Then future challenges for the safety of hydrogen technologies are discussed and the general safety issues in the electrolysis system are presented. Finally, accidents in context with electrolyzers are discussed and the legal framework is summarized. T2 - Hydrogen Europe - Workshop on safety standards for electrolysers CY - Online meeting DA - 01.10.2024 KW - Explosion protection KW - Process & plant safety KW - Hydrogen production PY - 2024 AN - OPUS4-61745 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mente, Tobias T1 - MatCom - Materialeigenschaften und Kompatibilität für Wasserstofftechnologien - MatCom 1 - Metallische Werkstoffe N2 - Aufbauend auf dem historischen Schadensfall von A. Martens im Jahr 1894 zur Explosion von H2-Gasflaschen auf dem Tempelhofer Feld und den dabei durchgeführten Untersuchungen wird im Hauptteil des Vortrages auf die Standardisierung der Hohlzugprüftechnik eingegangen. Dabei wird zunächst auf die Vor- und Nachteile unterschiedlicher Prüfmöglichkeiten zur Wasserstoffkompatibilität metallischer Werkstoffe und deren Schweißverbindungen eingegangen und im Weiteren die Umsetzung der Prüftechnik an der BAM beschrieben. Für die Standardisierung der Hohlzugprüftechnik wurden verschiedene Randbedingungen mit Einfluss auf die Ergebnisqualität überprüft. Dabei wurde der Pipelinestahl X65 als auch der additiv gefertigte Werkstoff 316L genutzt. Abschließend wird auf die Verwaltungspartnerschaft mit Namibia eingegangen und die umzusetzenden Projekte mit Bezug zur Schweißtechnik dargestellt. T2 - BAM-PTB Workshop CY - Magdeburg, Germany DA - 04.09.2024 KW - MatCom1 KW - H2Safety@BAM KW - Hohlzugprobe PY - 2024 AN - OPUS4-61036 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ekici, Nilsah T1 - SHIMMER project: safe hydrogen injection modelling and management for european gas network resilience N2 - To accelerate the transition to a low-carbon economy while exploiting existing infrastructure, hydrogen can be injected to the natural gas network. However, many technical and regulatory gaps should be closed, and adaptations and investments made to ensure that multi-gas networks across Europe will be able to operate in a reliable and safe way while providing a highly controllable gas quality and required energy demand. The SHIMMER project aims to enable a higher integration and safer hydrogen injection management in multi-gas networks by contributing to the knowledge and better understanding of hydrogen projects, their risks, and opportunities. T2 - EGATEC 2024 CY - Hamburg, Germany DA - 18.06.2024 KW - Hydrogen KW - Gas grid KW - Database KW - Low-carbon PY - 2024 AN - OPUS4-60519 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Shaanika, Sam T1 - Compatibility of welded austenitic stainless steel (316L) tube for green hydrogen applications N2 - The increase in the energy demand and the need to comply to net zero carbon regulations, as per the Paris 2015 climate agreement by 2050, has necessitated the urgency to consider hydrogen as alternative energy carrier. Moreover, hydrogen interaction with metals tend to cause degradation of the mechanical properties in terms of the ductility of the materials. More concern is on the weldment and repair of tubes or pipelines of hydrogen transportation and storage systems. In this study, the heat inducted weld tubes of the cold drawn and annealed austenitic stainless steel (316L) were investigated by slow strain rate test. To achieve the most realistic component-related testing, hollow tube specimens have been fabricated from 1/2-inch Swagelok pipes filled with internal gaseous hydrogen or inert air for reference. The hydrogen concentration measurement is undertaken before and after the autoclave high-pressure pre-charging of the specimens using carrier gas hot extraction. SEM analysis was used to carry out fractographic analysis to determine the crack initiation sites, crack size and was compared for the base material and heat affected zone influence in the gaseous hydrogen. The effect of hydrogen on the material compatibility of the welded austenitic stainless steel is assessed and compared to none-welded tubes tested in defined testing parameters that contribute to Hydrogen Assisted Cracking. A better understanding on the impact of weldment on the structural integrity for stainless steel is elucidated for green hydrogen application. T2 - IIW 77th Annual Assembly 2024 CY - Rhodes, Greece DA - 07.07.2024 KW - Austenitic stainless steel KW - Slow strain rate KW - Burst pressure KW - Orbital welding KW - Heat Induction PY - 2024 AN - OPUS4-60698 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - El Harrab, Hayat T1 - Evaluation of the Impact of Lubricating Oil on Pre-Ignition of Hydrogen for Engine Relevant Conditions N2 - A successful transition to clean energy depends on ensuring that the world's growing energy needs are met while reducing greenhouse gas emissions. Achieving this goal requires the use of carbon-free energy sources. Many utilities have already begun the shift from conventional carbon-based fuels to cleaner alternatives, such as hydrogen. However, numerous challenges persist regarding the use of hydrogen in internal combustion engines. The use of hydrogen in engines, which have extremely lower ignition energy, has raised concerns about the risk of pre-ignition due to the undesirable presence of lubricating oil during combustion. Due to its low auto-ignition temperature, lubricating oil is widely regarded as the main cause of abnormal combustion. To verify and understand the potential influence of lubricating oil on hydrogen reactivity, the auto-ignition temperature was measured using a constant volume reactor. Auto-ignition was identified by a sudden increase in pressure combined with a rapid rise in temperature. The experimental results verified that the addition of 0.2 ml lubricating oil to stoichiometric hydrogen-air mixtures at 20 bar reduced the auto-ignition temperature from 460°C to 270°C, reducing the ignition temperature by 190K. Moreover, the auto-ignition temperature of oil showed a decreasing trend as the initial amount of oil increased, indicating that the ignition process mainly occurs by vaporization. T2 - CI’s 40th International Symposium - Emphasizing Energy Transition CY - Milan, Italy DA - 24.07.2024 KW - Hydrogen KW - Lubricating oil KW - Auto-ignition temperature KW - Internal combustion engines and pre-ignition PY - 2024 AN - OPUS4-61373 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Leo, Reinhold T1 - Duplex stainless steels - Compatibility for high-pressure hydrogen applications N2 - The key for a transition into clean energy sources is based on the construction of safe energy infrastructure, such as transportation pipelines for Hydrogen. Duplex Stainless Steels (DSS) are an essential component used nowadays in the construction of transportation pipelines because of their many distinctive qualities. The choice of DSS for a particular hydrogen application mainly depends on its susceptibility level to Hydrogen Embrittlement (HE) or Hydrogen Assisted Cracking (HAC). Since the 20th century, the literature indicates three factors that must be considered: the microstructure of the alloy steel, the hydrogen concentration, and the mechanical load. Several mechanisms have been also proposed to describe the occurring microscale processes behind HE or HAC, and these include metastable phase transformation, Hydrogen Enhanced Localized Plasticity (HELP), and Hydrogen Enhanced Decohesion (HEDE). The following contribution describes the path to ascertain if DSS is suitable for high-pressure gaseous hydrogen applications. The interplay between several critical factors that result in HAC was examined using high-pressure gaseous hydrogen charging, Electron Backscatter Diffraction (EBSD), and hydrogen concentration measurements using Carrier Gas Hot Extraction (CGHE). It was determined whether the strain-induced martensitic transformation of the austenite was present in a DSS 1.4462 (DSS2205) in-service pipe and in samples of freshly charged DSS 1.4462. In comparison to the common electrochemical charging described broadly in the literature, no major direct martensitic phase transformation of the austenite phase under a high-pressure hydrogen environment was observed. As for future experiments, the intention is to analyse the impact of high-pressure gaseous hydrogen on the welded components of this grade, and under mechanical load via the hollow specimen technique. T2 - Oxford - EPRI Workshop on Hydrogen Embrittlement 2024 CY - Oxford, United Kingdom DA - 23.06.2024 KW - High-Pressure Hydrogen KW - Pipelines KW - Duplex Stainless Steels KW - Haydrogen Assisted Cracking KW - Hollow Specimen Technique PY - 2024 AN - OPUS4-60525 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grimault de Freitas, Tomás T1 - Comprehensive standardization of the hollow specimen method for tests in high pressure hydrogen gas N2 - As the world moves towards a decarbonised economy, the demand for sustainable and low-carbon alternatives is rapidly increasing. Hydrogen plays an important role in this transition, but in order to make the most of hydrogen as an energy carrier, a comprehensive understanding of its impact on the integrity of structural materials is necessary. Metallic materials, mostly steels, are the most regularly used structural materials in various components throughout the hydrogen supply chain. Ensuring their sustainable and safe use in hydrogen technologies is a crucial factor in the development of the hydrogen economy. This is particularly important since hydrogen can promote crack formation and ultimately lead to premature failure in these materials when combined with mechanical load. This process is commonly known as Hydrogen Embrittlement and can occur in almost all the steels used for the hydrogen technologies. Extensive materials qualification is needed for the rapid implementation of hydrogen technologies, however, most accepted, and standardised test methods for determining the effect of gaseous hydrogen on metallic materials describe complex and costly procedures that are only available to a very limited extent worldwide. The hollow specimen technique is a simple and economical method that has the potential to overcome the limitations of the current methods and complement them for qualifying metallic materials under high-pressure hydrogen gas. In this method, an axial hole is drilled in a tensile specimen, which is then filled with hydrogen gas, sealed, and placed in a standard testing machine. This method requires significantly lower amounts of hydrogen, resulting in fewer safety measures and no need for complex equipment or a specialised laboratory, unlike the conventional autoclave technique. The technique's low investment and testing costs, simple operation, and shorter testing time make it optimal for widespread use around the world, thereby increasing the output of results. Initial studies have demonstrated the feasibility of assessing hydrogen effects in metallic materials using the hollow specimen technique. This led to the establishment of the committee ISO/TC 164/SC 1/WG 9 “Tensile testing, method in high-pressure hydrogen environment“ to standardise the method, however, there are open questions that currently prevent the technique from being standardised for hydrogen testing. These open questions relate to specimen geometry, inner hole surface and gas quality and are being addressed in the H2HohlZug project. Here, the aim is to systematically address and close the gaps towards the standardisation of this technique for tests with hydrogen. This contribution presents the structure and milestones of the project, followed by initial results regarding the optimisation of the specimen geometry, as well as the influence of different manufacturing and finishing processes on the inner hole surface of the hollow specimen and its response to hydrogen effects. T2 - TestXpo | 32nd International Expo for Materials Testing CY - Ulm, Germany DA - 21.10.2024 KW - Hydrogen KW - Hydrogen Embrittlement KW - High-Pressure Gaseous Gas KW - Hollow Specimen Technique KW - H2HohlZug KW - TransHyDE KW - Standardisation KW - Tensile Test PY - 2024 AN - OPUS4-61453 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hickel, Tilmann T1 - Data driven research on hydrogen in metals N2 - The talk gives an overview on data-driven research on hydrogen in metals performed at BAM. The focus is on a ab-initio based high-throughput study on the hydrogen solubility in metals and metallic alloys. Furthermore, the redistribution of hydrogen in transforming microstructures is addressed. The talk ends with an explanation of participant projects in NFDI-MatWerk, motivating the formation of a new project connected to hydrogen technology. T2 - DGM Fachausschuss “Wasserstoffeffekte in Werkstoffen" CY - Saarbrücken, Germany DA - 05.05.2024 KW - Hydrogen KW - Solubility KW - High-throughput study KW - Ab initio simulation KW - NFDI-MatWerk PY - 2024 AN - OPUS4-62721 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hickel, Tilmann T1 - Hydrogen redistribution during electrochemical charging and mechanical testing: insights from a combined ab initio and finite element method N2 - In advanced high strength steels the mechanisms of hydrogen embrittlement are expected to be strongly connected to the amount of retained austenite (RA) contained in the microstructure and its transformation upon deformation. We have developed a multi-scale model for the hydrogen redistribution during hydrogen charging and tensile loading within martensitic/austenitic microstructure. Ab initio simulations have been used to resolve the complex energy profile of hydrogen in the martensite/austenite interface. Representative microstructures with different amounts of RA have been converted form experimental SEM-EBSD measurements. Simulations with the finite element method (FEM) have been used to analyse H concentration profiles within the microstructure. The simulations confirm an accumulation of H within the austenitic phase during charging, which undergoes a phase transformation under applied mechanical load during tensile testing and releases accumulated H into the martensite matrix. As a result, there is a pronounced H segregation to the microstructure regions subjected to high hydrostatic tensile stresses and plastic strains, which has a strong impact on the embrittlement behaviour. T2 - DPG Frühjahrstagung Sektion SKM CY - Berlin, Germany DA - 17.03.2024 KW - Hydrogen KW - Steel KW - Structural transformation KW - Ab initio simulation KW - Multiscale simulation PY - 2024 AN - OPUS4-62726 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hickel, Tilmann T1 - Effect of Hydrogen on the Phase Stability of Steels N2 - In this work, we studied the role of extreme hydrogen concentrations on the relative stability of the fcc/bcc/hcp phases using the ab initio thermodynamics. The results indicate that at low hydrogen chemical potentials the stability of the fcc phase, which can be representative of retained austenite (RA) in steels, is slightly enhanced by the presence of H atoms. In contrast, at high hydrogen chemical potentials the bcc phase is stabilized by H. Moreover, since the excess volume of the hydrogen-rich bcc phase is significantly larger than that of the fcc phase, the presence of a stress field can change the relative stability of these phases in the coexistence regions of the phase diagram. This feature is particularly important for cyclic loading conditions: during loading cycles forward and reverse phase transformations occur and the H released by these transformations can damage the material. T2 - TMS Annual Meeting 2024 CY - Orlando, FL, USA DA - 03.03.2024 KW - Hydrogen KW - Ab initio thermodynamics KW - Multiscale simulation KW - Hydride formation KW - Workflow PY - 2024 AN - OPUS4-62730 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hickel, Tilmann T1 - Fundamental insights into the mechanism of hydrogen embrittlement N2 - The talks starts with a study on H trapping and embrittlement in high-strength Al alloys. Then the phase stability and transformation between different Fe-H phases is discussed, together with implications on crack nucleation. In the last part MD-MC simulation of hydride formation at crack tips in Al alloys are shown. T2 - Integrated Computational Materials, Process and Product Engineering Conference, IC-MPPE CY - Leoben, Austria DA - 06.06.2024 KW - Hydrogen KW - Ab initio thermodynamics KW - Multiscale simulation KW - Hydride formation KW - Cracks PY - 2024 AN - OPUS4-62727 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Chakraborty, P. A1 - Mouton, I. A1 - Gault, B. A1 - Tehranchi, Ali A1 - Neugebauer, J. A1 - Hickel, Tilmann T1 - Effect of Sn on stacking fault energies in zirconium and its hydrides N2 - Hydrogen embrittlement in Zr-alloy fuel cladding is a primary safety concern for water-based nuclear reactors. Here we investigated the stabilization of planar defects within the forming hydrides by Sn, the primary alloying element of Zircaloy-4 used in the cladding. In order to explain the formation of hydrides and planar defects observed in our experiments, we performed atomic-scale ab initio calculations focusing on the solute interactions with generalized stacking faults in hcp 𝛼-Zr and fcc zirconium hydrides. Our calculations showed that an increase in Sn concentration leads to a stabilization of stacking faults in both the 𝛼-Zr and hydride phases. However, the solution enthalpy of Sn is lower in the 𝛼-Zr as compared to the other hydride phases, indicative of two competing processes of Sn depletion/enrichment at the Zr hydride/matrix interface. This is corroborated by experimental findings, where Sn is less soluble in hydrides and is mostly found trapped at interfaces and planar defects, indicative of stacking faults inside the hydride phases. Our systematic investigation enables us to understand the presence and distribution of solutes in the hydride phases, which provides a deeper insight into the microstructural evolution of such alloy's properties during its service lifetime. KW - Defects KW - First-principles calculations KW - Interface and surface thermodynamics KW - Microstructure KW - Hydrides KW - Structural properties PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-618044 DO - https://doi.org/10.1103/PhysRevMaterials.8.033605 SN - 2475-9953 VL - 8 IS - 3 SP - 1 EP - 9 PB - APS AN - OPUS4-61804 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Böttcher, Nils A1 - Dayani, Shahabeddin A1 - Markötter, Henning A1 - Bau, Alexander A1 - Setzchen, Max A1 - Schmidt, Anita A1 - Kowal, Julia A1 - Krug von Nidda, Jonas T1 - High Precision Nail‐Penetration Setup for the Controlled Thermal Runaway Initiation of Lithium‐Ion Cells at Very Low Temperatures N2 - A high precision nail‐penetration (NP) tool for characterizing the mechanically induced thermal‐runaway (TR) of lithium‐ion battery (LIB) cells in a defined range of temperatures down to −140 °C was developed. To understand the cell specific behavior at low temperatures aiming at the determination of safe handling conditions, different scenarios are analyzed. First, accuracy tests of the NP‐tool regarding motion and penetration depth are conducted with cylindrical cells at different temperatures. Thus, postmortem computer tomographic (CT) images are compared to the data measured with the newly integrated 3‐axis force sensor which is further combined with a high‐resolution position sensor. The herein developed setup allows evaluation of the NP‐metrics at an accuracy of ±1 pierced electrode layer without CT‐scans. Further NP examinations at 20 °C of fully charged cylindrical lithium nickel manganese cobalt oxide cells reveal a reproducible minimum damage as a reliable TR‐trigger. Moreover, NP‐tests at low temperature disclose a relation of the short circuit conductivity and TR‐reactions during subsequent rethermalization to room temperature. Finally, the implementation of a novel fixture for a controlled very fast cooling of LIB‐cells during critical damage opens the way to investigate the individual steps during a TR and, thus, to gain important information of the specific TR‐mechanism of different LIB‐cells. KW - Battery Safety KW - High-precision nail penetration KW - Lithium-ion batteries KW - Abuse testing KW - Thermal runaway PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-598127 DO - https://doi.org/10.1002/ente.202301379 SN - 2194-4288 SP - 1 EP - 13 PB - Wiley VHC-Verlag AN - OPUS4-59812 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Leonhardt, Robert A1 - Böttcher, Nils A1 - Dayani, Shahabeddin A1 - Rieck, Arielle A1 - Markötter, Henning A1 - Schmidt, Anita A1 - Kowal, Julia A1 - Tichter, Tim A1 - Krug von Nidda, Jonas T1 - Exploring the electrochemical and physical stability of lithium-ion cells exposed to liquid nitrogen N2 - The transport and storage of lithium-ion (Li-ion) batteries — damaged or in an undefined state — is a major safety concern for regulatory institutions, transportation companies, and manufacturers. Since (electro)chemical reactivity is exponentially temperature-dependent, cooling such batteries is an obvious measure for increasing their safety. The present study explores the effect of cryogenic freezing on the electrochemical and physical stability of Li-ion cells. For this purpose, three different types of cells were repeatedly exposed to liquid nitrogen (LN2). Before and after each cooling cycle, electrical and electrochemical measurements were conducted to assess the impact of the individual freezing steps. While the electrochemical behavior of the cells did not change significantly upon exposure to LN2 , it became apparent that a non-negligible number of cells suffered from physical changes (swelling) and functional failures. The latter defect was found to be caused by the current interrupt device of the cylindrical cells. This safety mechanism is triggered by the overpressure of expanding nitrogen which enters the cells at cryogenic temperatures. This study underlines that the widely accepted reversibility of LN2 -cooling on a material scale does not allow for a direct extrapolation toward the physical integrity of full cells. Since nitrogen enters the cell at cryogenic temperatures and expands upon rethermalization, it can cause an internal overpressure. This can, in turn, lead to mechanical damage to the cell. Consequently, a more appropriate temperature condition — less extreme than direct LN2 exposure — needs to be found KW - Lithium-ion battery KW - LN2 cooling KW - Battery characterization PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-599248 DO - https://doi.org/10.1016/j.est.2024.111650 VL - 89 SP - 1 EP - 7 PB - Elsevier B.V. AN - OPUS4-59924 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Böttcher, Nils A1 - Dayani, Shahabeddin A1 - Markötter, Henning A1 - Schmidt, Anita A1 - Kowal, J. A1 - Lu, Y. A1 - Krug von Nidda, Jonas A1 - Bruno, Giovanni T1 - Visualization of stepwise electrode decomposition in a nail penetrated commercial lithium-ion cell using low-temperature synchrotron X-ray computed tomography N2 - The transition towards zero carbon emissions in power generation hinges on the integration of efficient electrical energy storage systems, with lithium-ion batteries (LIBs) positioned as a pivotal technology. While generally safe, deviations in their operational guidelines due to manufacturing defects or misuse can lead to critical safety concerns, notably thermal runaway (TR) events. Internal short circuits (ISCs) are primary initiators of TR within LIBs. For abuse testing, ISCs are often triggered by nail penetration. This study explores the morphological changes and mechanisms underlying ISC-induced TR in LIBs using operando synchrotron X-ray computed tomography (SXCT) at subzero temperatures. A novel cryogenic setup was developed to control a stepwise temperature increase in the damaged sample while monitoring electrochemical characteristics and simultaneously enabling acquisition of high-resolution SXCT images. The findings reveal that conducting nail penetration at minus 80°C prevents immediate TR, enabling detailed analysis of subsequent structural and electrochemical behavior during controlled thawing. Thus, the initiation of TR processes at localized ISC sites has been observed, evidenced by voltage fluctuations and morphological changes, such as cathode material cracking and decomposition. These results underscore the importance of temperature control in mitigating TR risks and provide critical insights into the internal dynamics of LIBs under abusive conditions. The developed cryogenic SXCT methodology offers a powerful tool for non-destructive, high-resolution investigation of battery failure mechanisms, contributing to the enhancement of LIB safety. KW - Tomography KW - X-ray imaging KW - Lithium-ion battery PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-611327 DO - https://doi.org/10.1016/j.jpowsour.2024.235472 VL - 623 SP - 1 EP - 10 PB - Elsevier CY - New York, NY AN - OPUS4-61132 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Appel, Paul Alexander T1 - Developing Tailor-Made Core-Shell Carbon Anode Materials for Sodium Ion Batteries N2 - Hard carbons (HCs) are currently one of the most promising anode materials for sodium-ion batteries (SIBs). However, the Na storage mechanism remains controversial, leaving the theoretical limits of carbon anodes unclear. To deconvolute the specific capacity from irreversible capacity losses, resulting from the formation of solid electrolyte interphase (SEI), core-shell carbon materials were synthesized. Based on these core-shell materials, extensive operando characterization was developed and undertaken to investigate the storage mechanism of sodium. T2 - Sodium Ion Battery Symposium CY - Berlin, Germany DA - 23.09.2024 KW - Energy Materials PY - 2024 AN - OPUS4-62005 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sander, Luise T1 - Commercially Available Sodium-Ion Cells: Multi-Scale Analysis and Material Characterisation N2 - As the first commercial sodium-ion-batteries (SIBs) are available for purchase, it is possible to investigate material composition. Gaining an insight into the material composition of these SIBs is of interest not only for the classification of possible safety risks and hazards, but also in regards to recycling. Herein we report the preliminary investigations of the chemical and structural composition of first commercial SIB-cells. Two different SIB-cells with different specification were compared regarding electrode size, thickness and further parameters. Furthermore, the composition of the active materials and electrolyte was investigated and compared. T2 - Adlershofer Forschungsforum 2024 CY - Berlin, Germany DA - 11.11.2024 KW - Sodium-Ion KW - Multi-Scale Analysis PY - 2024 AN - OPUS4-61757 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bäßler, Ralph A1 - Amela Keserović, Amela A1 - Sobetzki, Joana A1 - Sarmiento Klapper, Helmuth A1 - Dimper, Matthias T1 - Geeignete Werkstoffe für Geothermieanwendungen (1) N2 - Durch Auslagerungs- und elektrochemische Tests im Labor kann das Korrosionsverhalten verschiedener metallener Werkstoffe beurteilt werden. Aus den Versuchsergebnissen, die in verschiedenen synthetischen Geothermalwässern im Labor erzielt wurden, lassen sich die folgenden Schlussfolgerungen ziehen: • Die Anfälligkeit für Spaltkorrosion wurde als wichtigster Aspekt für die Werkstoffqualifizierung ermittelt. • Der niedriglegierte Stahl 25CrMo4 zeigte bei niedrigem Salzgehalt in MB-Geothermalwasser eine gleichmäßige Korrosion unterhalb der akzeptierten Schwelle von 0,3 mm/Jahr. Daher kann er als geeignet für geothermische Bedingungen mit niedrigem Salzgehalt angesehen werden, wie sie für MB getestet wurden. Es besteht keine Notwendigkeit, auf höherlegierte (teurere) Werkstoffe auszuweichen. Ein niedrigerer pH-Wert (wie bei LHD) führt zu Korrosionsraten oberhalb der akzeptablen Grenzwerte, so dass die niedriglegierten Werkstoffe nicht für Flüssigkeiten mit niedrigem pH-Wert geeignet sind. • Stark salzhaltige Geothermalwässer erfordern höherlegierte Werkstoffe, da die Korrosionsrate von niedriglegiertem Stahl zu hoch ist. • Der Duplexstahl X2CrNiMo22-5-3 und der Superduplexstahl X2CrNiMoCuWN25-7-4 wurden aufgrund ihrer kritischen Anfälligkeit für örtliche Korrosion in Form von Loch- und Spaltkorrosion unter Betriebsbedingungen nicht als geeignet für geothermische Anwendungen in Geothermalwässern mit einer mit NDB und ORG vergleichbaren Zusammensetzung angesehen. • Der superaustenitische Stahl X1CrNiMoCu32-28-7 eignet sich für ORG und salzarme Wässer. In NDB-Geothermalwasser wurde er bei 100 °C als geeignet angesehen. Jedoch schränkt seine Anfälligkeit für Spaltkorrosion seine Anwendbarkeit ein. Neben seiner guten Korrosionsbeständigkeit ist sein Repassivierungsverhalten für seine begrenzte Anwendbarkeit in Geothermalwässern mit niedrigem pH-Wert verantwortlich. • Die Nickelbasislegierung NiCr23Mo16Al wurde als geeignet erachtet und stellt eine sichere Option für den Einsatz in geothermischen Anlagen dar, selbst wenn mit stark salzhaltigem Geothermalwasser gearbeitet wird. KW - Geothermie KW - Korrosion KW - Legierungen KW - Anlagensicherheit PY - 2024 SN - 0016-4232 VL - 2024 IS - 2 SP - 240 EP - 243 PB - Eugen G. Leuze Verlag CY - Bad Saulgau AN - OPUS4-59996 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -