TY - CONF A1 - Trappe, Volker T1 - Fatigue loading of sandwich shell test specimens with simulated production imperfections and in-situ NDT N2 - A shell test bench was developed at BAM 5.3 which allows for static and fatigue testing of curved fiber-reinforced plastic (FRP) structures, during which in-situ the damage state can be non-destructively inspected by thermography and strain-field measurement techniques. Sandwich shell specimens with typical wind turbine blade manufacturing defects were designed and tested. The tested imperfections show a fairly significant reduction (up to 90%) of the shell test specimens‘ lifetime, depending on the type of imperfection. Using the in-situ NDT methods incorporated in the shell test bench, the location and cycle time of the initial defects and the damage evolution was investigated. T2 - 7. International Conference on Fatigue of Composites CY - Vicenza, Italy DA - 04.07.2018 KW - Fatigue of sandwich shell structures KW - Non-destructive testing KW - Wind turbine blades PY - 2018 AN - OPUS4-50126 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank T1 - Retaining Competence for Safe Transports of Radioactive Material N2 - The nuclear phase out in Germany will lead to a challenge finding skilled staff for all areas in nuclear business. Transport of spent fuel and high-level nuclear waste is an ongoing task over the next decades during the decommissioning of nuclear power plants and after the interim storage. The international regulations were adapted and address the issue of transports after storage now. The topic of aging and assessment of the development of the state-of-art technology are in focus. German research funds are supporting the investigations of future challenges of transport and storage of the nuclear heritage. BAM is involved and works on several topics related to the aging issue of packages. The behaviour of spent fuel claddings, long-term behaviour of metal and elastomeric gaskets and sensor/monitoring techniques of waste disposal are examples of research fields. T2 - 7th Nuclear Decommissioning & Waste Management Summit 2020 CY - London, UK DA - 12.02.2020 KW - Aging management KW - Transport KW - Spent fuel behaviour KW - Disposal PY - 2020 AN - OPUS4-50987 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten T1 - Dynamic Test Method - an Update N2 - An update about the dynamic test method for the determination of the seasonal performance of heat pumps given at the CEN/TC 113/WG 7 meeting. T2 - Meeting of CEN/TC 113/WG 7 CY - Courbevoie, France DA - 14.01.2020 KW - Heat pump KW - Dynamic test method KW - Seasonal performance KW - Coefficient of performance PY - 2020 AN - OPUS4-50579 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - Ökodesign und Energielabel: Entwicklung, geltendes Recht und Ausblick N2 - Der Vortrag gibt einen Überblick über die Entwicklung der Anforderungen, die geltenden und kommenden Regeln für Produkte unter den beiden Rechtsinstrumenten und berührt die Frage, was in Zukunft den Schwerpunkt der Rechtssetzung darstellen wird T2 - Jahrestagung 2020 FA Haushaltstechnik der dgh CY - Nuremberg, Germany DA - 06.02.2020 KW - Ökodesign KW - Energieverbrauchskennzeichnung KW - Energieeffizienz KW - Ressourceneffizienz KW - EU-Recht PY - 2020 AN - OPUS4-50355 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Florian, Camilo T1 - Femtosecond laser nanostructuring of metal and semiconductor surfaces N2 - The irradiation of solids with high-intensity laser pulses can excite materials into extreme conditions, which then return to equilibrium via various structural and topographical relaxation mechanisms. Thus, ultrafast laser processing can manifest in various morphological surface transformations, ranging from direct contour shaping to large-area-surface functionalization through the generation of self-organized nano- and microstructures. The interaction mechanisms between semiconductors and metals with ultrashort laser pulses have been extensively studied using femtosecond laser sources, generating a general understanding of the main interaction mechanisms present during the processing of those materials. In the specific case of nanometer-scaled laser-induced periodic surface structures (LIPSS), however, the general explanation that fits all the experimental outcomes is still to be completed. The most accepted explanation consists in the interference of the incoming laser pulse with light scattered at the rough surface, e.g. via surface plasmon polaritons. Such scattering and interference effects generate a spatially modulated pattern of the absorbed optical energy featuring maxima and minima with periods very close to the laser irradiation wavelength, λ. One general criterion that allows to classify LIPSS in terms of their spatial periodicity (Λ) for normally incident radiation is the following: low spatial frequency for Λ≈λ, and high spatial frequency for Λ≪λ. In this way, the right combination of irradiation parameters (laser fluence, number of pulses per spot area unit and repetition rate) could be used to cover a wide size range that can ultimately be exploited for different applications in optics, biology, fluidics and tribology among others. T2 - SPIE Photonics West Conference, Symposium "Synthesis and Photonics of Nanoscale Materials XVII" CY - San Francisco, CA, USA DA - 01.02.2020 KW - Laser-induced periodic surface structures (LIPSS) KW - Femtosecond laser ablation KW - Metal KW - Semiconductor PY - 2020 AN - OPUS4-50388 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Florian, Camilo T1 - Femtosecond laser functionalized surfaces inspired by nature N2 - Nature has continuously inspired science when practical problems need to be solved in a functional and efficient way. The challenge for researchers usually consists in the transfer of such biological functionalities to diverse types of technical materials with the available processing technologies. In this regard, femtosecond laser-based approaches offer a large flexibility to modify virtually any material (metals, semiconductors and dielectrics), provide the ability to work under different environment conditions (air, vacuum or reactive atmospheres) and when combined with the proper optics, they offer exceptional spatial resolutions that could be used to mimic effectively very complex functionalities. In the particular case of surface processing, lasers have been proven feasible to functionalize materials by customizing its optical properties, chemical composition and surface morphology in a controllable way and in some cases at industrially relevant speeds. In this work, we present a selection of technical applications based on surface modifications in the form of laser-induced periodic surface structures (LIPSS) to tailor the material properties for utilization in optics, fluid transport, wetting control and tribology. T2 - SPIE Photonics West Conference, Symposium "Laser-Based Micro- and Nano-Processing XIV" CY - San Francisco, CA, USA DA - 01.02.2020 KW - Laser-induced periodic surface structures, LIPSS KW - Biomimetics KW - Surface functionalization KW - Laser ablation PY - 2020 AN - OPUS4-50400 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten T1 - Test methods for air conditioners N2 - Comparison of test methods for air conditioners that are currently discussed in standardization. The limitations of the current standard are shown and different options for the further development of the standard are presented T2 - Arbeitsgruppensitzung des Fachverbands Gebäude-Klima CY - Online meeting DA - 28.05.2020 KW - air conditioner KW - test method KW - Load-based testing KW - energy label PY - 2020 AN - OPUS4-50829 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schönfelder, Thorsten T1 - Kerntechnische Entsorgung Herausforderungen im Transport und bei der Lagerung N2 - Nach der Reaktorkatastrophe in Fukushima 2011 hat die Bundesregierung beschlossen die Nutzung der Kernenergie bis zum Jahr 2022 zu beenden. Seitdem erfolgt der Rückbau und die Stilllegung der kerntechnischen Anlagen in Deutschland. Dieser Vortrag erörtert die Herausforderungen, die sich mit dem Transport und der Lagerung von Kernbrennstoffen ergeben und leitet daraus Anforderungen ab, die an Transportbehälter gestellt werden. T2 - Ausgewählte Kapitel der Werkstofftechnik - Brand- und Explosionsverhalten von Werkstoffen CY - Wuppertal, Germany DA - 24.01.2020 KW - Kerntechnische Entsorgung KW - Rückbau KW - Transport- und Lagerbehälter PY - 2020 AN - OPUS4-50428 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten T1 - Test methods for heat pumps N2 - Comparison of different test methods for the determination of the seasonal performance of heat pumps: 1) The current test standard EN14825, 2) the compensation test method and 3) the dynamic test method. T2 - Impact Assessment / Consultation Space and Water Heaters WG2 Testing CY - Online meeting DA - 02.04.2020 KW - Heat pump KW - Energy label KW - Seasonal performance KW - Compensation method KW - Dynamic method PY - 2020 AN - OPUS4-50713 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten T1 - Technical Meeting BAM RRT for Heat Pumps N2 - Kickoff meeting for the BAM round robin test for load-based heat pump testing T2 - Kickoff meeting BAM RRT for heat pumps CY - Online meeting DA - 26.03.2020 KW - Heat pump KW - Round robin test KW - Load-based testing KW - Compensation method KW - Energy efficiency PY - 2020 AN - OPUS4-50715 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten T1 - Technical Meeting BAM RRT for Air Conditioner N2 - Kickoff meeting for the BAM round robin test for load-based air conditioner testing. T2 - Kickoff meeting BAM RRT for air conditioner CY - Online meeting DA - 26.03.2020 KW - Air conditioner KW - Round robin test KW - Load-based testing KW - Compensation method KW - Energy efficiency PY - 2020 AN - OPUS4-50716 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Unterstützung der Marktüberwachung - Steigerung der Glaubwürdigkeit produktbezogener Energieeffizienz-Instrumente der EU N2 - Vorstellung eines Projektes zur Evaluierung bestehender Prüfmethoden und zur Entwicklung von Werkzeugen für die Marktüberwachung. T2 - Experten-Workshop des VZBZ CY - Berlin, Germany DA - 07.03.2016 KW - Marktüberwachung KW - Ökodesign KW - Energieverbrauchskennzeichnung PY - 2016 AN - OPUS4-35530 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Ökodesign und Industrieprodukte - Tendenzen der Marktüberwachungsaktivitäten N2 - Sachstandbericht zu der Entwicklung gesetzlicher Auflagen zum in Verkehr bringen von Elektromotoren und den entsprechenden Aktivitäten der Marktüberwachung. T2 - 14. Technischer Tag der VEM Gruppe CY - Wernigerode, Germany DA - 15.09.2015 KW - Marktüberwachung KW - Elektromotoren KW - Industriegüter PY - 2015 AN - OPUS4-35532 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Transformatoren, Netzteile und USV - Stand und Überwachung der EU-Verordnungen N2 - Zusammenfassung des Ökodesigns, Berichterstattung über den Stand der EU-Verordnungen, der diesbezüglichen Marktüberwachungstätigkeiten und Überblick über aktuelle Diskussionen bei der europäischen Kommission über Produktprüfungen von Industriegütern. T2 - Jahrestagung des ZVEI - Zentralverband Elektrotechnik- und Elektronikindustrie CY - Magdeburg DA - 11.04.2016 KW - Ökodesign KW - Marktüberwachung KW - Industriegüter PY - 2016 AN - OPUS4-35740 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank T1 - Aktuelles zur Weiterentwicklung der IAEA Transportempfehlungen N2 - Die IAEA Transportempfehlungen stellen die Basis der sicherheitstechnischen Anforderungen von Behältern zum Transport radioaktiver Stoffe dar. Sie gelten als international harmonsiert und werden regelmäßig an den Stand von Wissenschaft und Technik angepasst. Der laufende Revisionsprozess berücksichtigt mehr als 150 Vorschläge zur Weiterentwicklung des Regelwerks. Wesentliche Themen, die für die hoheitlichen Prüfungen im Zuständigkeitsbereich der BAM eine Rolle spielen, werden im Vortrag vorgestellt. Das Implementieren der besonderen sicherheitstechnischen Anforderungen an Zwischenlagerbehälter werden im Detail behandelt. Ebenfalls von Interesse ist die Weiterenticklung der Anforderungen, die den Einfluss des radioaktiven Inventars auf das Verschlusssystem bei Fallprüfungen diskutiert. T2 - 5. RAM-Behältersicherheitstage CY - Berlin, Deutschland DA - 16.03.2016 KW - IAEA KW - Transportbehälter KW - Sicherheitstechnische Auslegung KW - Dual purpose casks KW - Fallprüfungen PY - 2016 AN - OPUS4-35655 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eisermann, René T1 - Verteilte faseroptische Sensorik für die akustische Detektion von Teilentladungen N2 - Eingeladener Seminarvortrag an der Technischen Universität Berlin über neuste wissenschaftliche Ergebnisse der Detektion von Teilentladungen an Kabelmuffen mittels verteilter akustischer Sensorik. T2 - Seminarvortrag bei der Veranstaltung "Hochspannungstechnik/ Energieübertragung" CY - Berlin, Deutschland DA - 11.11.2015 KW - 8.6 KW - Fasersensorik KW - Verteilte akustische Sensorik KW - Teilentladungs Überwachung PY - 2015 AN - OPUS4-35699 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger T1 - Research activities at BAM related to extended spent fuel and HLW storage N2 - This presentation starts with a brief overview about the current situation of spent nuclear fuel and high level waste storage in Germany followed by a discussion of the expected timeline towards final disposal. Furthermore an overview is presented about research programmes for radioactive waste disposal and also extended interim storage issues due to the delay of the national repository siting procedure. In the second part of the presentation BAM research activities related to extended interim storage are addressed. This includes the status and preliminary results of proactive R&D projects concerning metal seals, degradation effects of polymers used as neutron shielding materials and finally elastomer seals. T2 - RIC 2016 - 28th Annual regulatory information conference CY - North Bethesda, Maryland, USA DA - 08.03.2016 KW - Spent Fuel KW - Extended interim storage KW - Radioactive waste KW - Degradation effects PY - 2016 UR - https://ric.nrc-gateway.gov/docs/abstracts/volzkeh-w22-hv.pdf AN - OPUS4-35614 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger T1 - Safety demonstrations with regard to extended interim storage N2 - This presentation addresses safety aspects concerning dual purpose casks for transportation and storage of spent fuel and high level radioactive waste. The long term performance of casks and their safety relevant components like sealed lid systems and the long term performance of cask internals, especially spent fuel assemblies are discussed. Transportation after interim storage is another key issue and due to the fact of delayed disposal projects current interim storage periods need to be extended causing additional safety demonstration needs for longer periods of time. Regarding this situation present BAM research activities in this area and their preliminary outcomes are presented. T2 - 5. RAM-Behältersicherheitstage CY - Berlin DA - 16.03.2016 KW - Interim storage KW - Radioactive waste KW - Spent fuel KW - Safety PY - 2016 AN - OPUS4-35615 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schönhals, Andreas T1 - Influence of a nanoscale confinement on the dynamics of discotic liquid crystals investigated by inelastic neutron scattering and relaxation spectroscopy N2 - Discotic liquid crystals (DLCs) are self-assembled materials where self-assembly is driven by non-covalent intermolecular interactions. The corresponding molecules consist of a flat and rigid aromatic core substituted by flexible aliphatic side chains. While the former is responsible for the π-stacking, the latter gives rise to an increased solubility, processability, and rich thermotropic behavior. The disc-shaped molecules form columns that further assemble into two-dimensional arrays with a hexagonal mesophase. The alkyl chains fill the intracolumnar space giving rise to a nanophase separated state. Two different homologous systems based on triphenylene derivatives were investigated as model systems for DCLs where the length of the aliphatic side chains is widely varied. Measurements were carried out in the bulk state and confined to the nanometre wide channels of anodic aluminum membranes (Pore diameter 20 nm, 40nm, 80 nm and 180 nm) by means of inelastic and quasielastic neutron scattering. These investigations were accompanied by calorimetry and dielectric relaxation spectroscopy. From the neutron scattering experiments the vibrational density of states (Boson Peak) from neutron time-of-flight spectroscopy, the molecular dynamics on a time scale of ca. 1 ns (elastic scans from neutron backscattering spectrometers) as well as quasielastic neutron scattering by a combination of time-of-flight spectroscopy and backscattering were considered. Structural information is retrieved by X-ray diffraction carried out on a synchrotron. The dynamics of these unique soft matter materials are discussed in detail considering their structure (length of the aliphatic side chain), the effect of self-confinement (of the aliphatic chains in the intracolumnar space) and of outer confinement (influence of the pore size). Comparison is further made to pyrene based system. T2 - 18. International Seminar on Neutron Scattering Investigations in Condensed Matter CY - Poznan, Poland DA - 12.05.2016 KW - Discotic liquid crystals KW - Nanoconfinement KW - Neutron scattering PY - 2016 AN - OPUS4-36059 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Brown, A. S. T1 - Traceable standards and methods for the analysis of non-conventional energy gases N2 - Declining European natural gas resources and increasing legislation mean that diversification towards ‘non-conventional gases’ is essential. Accurate and traceable measurements of the composition of non- conventional gases are required to ensure gases can be transported in existing pipeline networks, and used with existing appliances. The EMRP ‘Characterisation of energy gases’ project is successfully developing a metrology infrastructure to underpin these measurements. New standards and methods have been developed for biogas composition, biogas impurities, coal mine gases, refinery gases and environmentally-friendly odorants. The project is set to conclude in 2013 with the challenging analysis of a series of real non-conventional gas samples. T2 - 28th Meeting of the CCQM Gas Analysis Working Group (GAWG) CY - Saint Petersburg, Russian Federation DA - 24.10.2012 KW - metrology KW - traceable standards KW - energy gases PY - 2012 AN - OPUS4-35946 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -