TY - CONF A1 - Brown, A. S. T1 - Traceable standards and methods for the analysis of non-conventional energy gases N2 - Declining European natural gas resources and increasing legislation mean that diversification towards ‘non-conventional gases’ is essential. Accurate and traceable measurements of the composition of non- conventional gases are required to ensure gases can be transported in existing pipeline networks, and used with existing appliances. The EMRP ‘Characterisation of energy gases’ project is successfully developing a metrology infrastructure to underpin these measurements. New standards and methods have been developed for biogas composition, biogas impurities, coal mine gases, refinery gases and environmentally-friendly odorants. The project is set to conclude in 2013 with the challenging analysis of a series of real non-conventional gas samples. T2 - 28th Meeting of the CCQM Gas Analysis Working Group (GAWG) CY - Saint Petersburg, Russian Federation DA - 24.10.2012 KW - metrology KW - traceable standards KW - energy gases PY - 2012 AN - OPUS4-35946 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rohwetter, Philipp A1 - Eisermann, René A1 - Krebber, Katerina T1 - Random quadrature demodulation for direct detection single-pulse rayleigh C-OTDR N2 - We present a demodulation method that partially compensates for the nonlinear and random transfer function of fiber-optic direct detection coherent Rayleigh optical time-domain reflectometry (C-OTDR). Specifically, the proposed method is shown to improve the detection of small amplitude, high frequency dynamic optical fiber strain as it occurs in acoustic emission sensing. The method is applicable provided that the dynamic fiber strain to be sensed is known to affect a longer section of sensing fiber in a spatially homogeneous way. It is shown that this knowledge can be used to extract more quantitative information from the measured C-OTDR signal by averaging signal components from the affected fiber section in a suitable and efficient way. The theoretical basis of the method is developed and supporting experimental results are presented. KW - Optical fiber sensors KW - Coherent optical time-domain reflectometry (C-OTDR) KW - Fiber-optic speckle interferometry KW - Remote acoustic emission sensing PY - 2016 DO - https://doi.org/10.1109/JLT.2016.2557586 SN - 0733-8724 VL - 34 IS - 19 SP - 4437 EP - 4444 PB - IEEE CY - Piscataway, NJ, USA AN - OPUS4-35948 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zencker, Uwe T1 - ASME-Regelwerksentwicklung zu numerischen Nachweismethoden N2 - Es wird über die Weiterentwicklung des ASME (American Society of Mechanical Engineers) – Regelwerks berichtet. Relevant für das Design von Behältern ist ASME BPVC (ASME Boiler and Pressure Vessel Code) Section III Division 3. In den ASME BPVC in der Fassung von 2015 wurden dehnungsbasierte Bewertungskriterien aufgenommen. Eine dehnungsbasierte Bewertung erfordert die genaue Kenntnis der aufgetretenen Dehnungen, d.h. speziell möglichst genaue numerische Berechnungen der Behälterbeanspruchungsszenarien. Daher sind regulatorische Vorgaben notwendig für die Vorbereitung, Durchführung und Auswertung numerischer Simulationen. In einer Arbeitsgruppe (ASME Special Working Group on Computational Modeling for Explicit Dynamics) werden dazu Leitlinien für die Anwendung numerischer Berechnungsverfahren entwickelt. Im Vortrag werden diese Leitlinien vorgestellt. T2 - 5. RAM-Behältersicherheitstage CY - Berlin, Germany DA - 16.03.2016 KW - ASME KW - Regelwerk KW - Leitlinien KW - Numerische Nachweismethoden KW - Numerische Berechnungsverfahren PY - 2016 AN - OPUS4-35991 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - Konformitätsprüfungen bei energieverbrauchsrelevanten Produkten - der Teufel steckt im Detail N2 - Vortrag zu den Herausforderungen bei Konformitätsprüfungen für energieverbrauchsrelevante Produkte. Nach einer Einführung zur Regelungslandschaft wird auf Mängel bei der Reproduzierbarkeit bestimmter Prüfungen und die Grenzen der Prüfbarkeit eingegangen. T2 - Thementag des VMPA "Realitätsnähe von Prüfungen" CY - Bonn, Germany DA - 24.5.2016 KW - Ökodesign KW - Energieverbrauchskennzeichnung KW - Konformitätsprüfung Messunsicherheit PY - 2016 AN - OPUS4-36262 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - Lampen und Leuchten unter der Ökodesign-und der EnVK-Richtlinie:Anforderungen und Marktüberwachung N2 - Vortrag zur Ökodesignrichtlinie und zur Energieverbrauchskennzeichnung auf einer Branchentagung mit Schwerpunkt Beleuchtungstechnik T2 - SGS Fachtag Lampen und Leuchten CY - Düsseldorf, Germany DA - 9.6.2015 KW - Ökodesign KW - Energieverbrauchskennzeichnung KW - Beleuchtung PY - 2015 AN - OPUS4-36263 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - Recycling, Ressourceneffizienz und Abfallvermeidung als Produkteigenschaft? – Das Beispiel Ökodesignrichtlinie N2 - Die Richtlinie 2009/125/EU kurz Ökodesignrichtlinie, erlaubt dem Gesetzgeber Eingriffe in die Produktgestaltung. Die Kriterien für einzelne Produktkategorien werden als direkt anwendbaren EU-Verordnungen festgelegt. Zur Vorbereitung lässt die EU-Kommission eine Art vereinfachter Lebenszyklusanalyse (LCA) durchführen, um relevante Umweltauswirkungen zu identifizieren und Vorschläge zur deren Verbesserung zu machen, zunächst vor allem zur Energieeffizienz. Bekanntestes Beispiel ist das sog. Glühlampenverbot, eine Regelung zur Mindesteffizienz. In den letzten Jahren wächst das Interesse, das Potenzial der Richtlinie auch für andere Aspekte wie Ressourceneffizienz und der Umweltauswirkungen in der Produktion bzw. Entsorgung auszuschöpfen. Der Vortrag stellt die Richtlinie und ihre Möglichkeiten für den Bereich Recyclingfähigkeit dar. T2 - 20th Leibniz Conference on Advanced Science– Recycling CY - Lichtenwalde, Germany DA - 19.5.2016 KW - Ökodesign KW - Ressourceneffizienz KW - Recycling PY - 2016 AN - OPUS4-36264 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Neumann, Patrick P. A1 - Lazik, D. A1 - Bartholmai, Matthias T1 - Tomographic reconstruction of soil gas distribution from multiple gas sources based on sparse sampling N2 - A monitoring method is introduced that creates twodimensional (2D) maps of the soil gas distribution. The method combines linear gas sensing technology for in-situ monitoring of gases in soil with the mapping capabilities of Computed Tomography (CT) to reconstruct spatial and temporal resolved gas distribution maps. A weighted iterative algebraic reconstruction method based on Maximum Likelihood with Expectation Maximization (MLEM) in combination with a source-by-source reconstruction approach is introduced that works with a sparse setup of orthogonally-aligned linear gas sensors. The reconstruction method successfully reduces artifact production, especially when multiple gas sources are present, allowing the discrimination between true and non-existing so-called ghost source locations. Experimental validation by controlled field experiments indicates the high potential of the proposed method for rapid gas leak localization and quantification with respect to Pipeline or underground gas storage issues. KW - Computed tomography KW - Gas distribution mapping and gas source localization KW - Discrimination of multiple gas sources KW - Distributed linear sensor KW - Membrane-based gas sensing KW - Subsurface monitoring KW - Gas storage areas PY - 2016 DO - https://doi.org/10.1109/JSEN.2016.2545103 SN - 1530-437X VL - 16 IS - 11 SP - 4501 EP - 4508 PB - IEEE - Inst. Electrical Electronics Engineers Inc CY - Hoes Lane, NJ, USA AN - OPUS4-36228 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger T1 - Zusätzliche Anforderungen und Sicherheitsnachweise für eine verlängerte Zwischenlagerung von BE- und HAW-Behältern N2 - Bisherige Betriebserfahrungen und Erkenntnisse lassen die grundsätzliche Eignung der Transport- und Lagerbehälter auch über 40 Jahre hinaus erwarten. Eine Verlängerung der genehmigten Zwischenlagerdauer erfordert eine Neugenehmigung. Hierbei sind die zu diesem Zeitpunkt sicherheitstechnisch relevanten Eigenschaften der tatsächlich vorhandenen Inventare und Behälter zu berücksichtigen. Sicherheitstechnische Nachweise sind auf Grundlage belastbarer Daten und Erkenntnisse zu führen. Diese müssen rechtzeitig verfügbar sein (z.B. Betriebserfahrungen oder zusätzliche F&E-Programme z.B. zu Behälterdichtsystemen oder Inventarverhalten). Alterungsmanagementprogramme und periodische Sicherheits-überprüfungen während der Zwischenlagerung haben sowohl für die verlängerte Zwischenlagerung als auch für nachfolgende Transporte eine erhebliche Bedeutung.Die Schaffung eines spezifischen Regelwerks für die verlängerte Zwischenlagerung von Transport- und Lagerbehältern und deren nachfolgendem Abtransport unter Berücksichtigung der Anforderungen aus beiden Verwendungsbereichen erscheint sinnvoll. Eine verlängerte Zwischenlagerung dient ausschließlich der Überbrückung bis zur Endlagerung. Hierbei sollten die bestehenden Behälter und Inventare frühzeitig in die Überlegungen zur Definition von Anforderungen für die Endlagerung einbezogen werden. Die internationalen Entwicklungen und Untersuchungen im Bereich der längerfristigen Zwischenlagerung sollten zur Nutzung von Synergieeffekten weiter verfolgt, ausgewertet und mitgestaltet werden. T2 - Endlager-Symposium 2016 CY - Munich, Germany DA - 04.02.2016 KW - Verlängerte Zwischenlagerung KW - Extended interim storage KW - Bestrahlte Brennelemente KW - Spent Nuclear Fuel KW - Behälter für radioaktive Stoffe KW - Radioactive waste containers PY - 2016 AN - OPUS4-35413 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lazik, D. A1 - Ebert, S. A1 - Neumann, Patrick P. A1 - Bartholmai, Matthias T1 - Characteristic length measurement of a subsurface gas anomaly - A monitoring approach for heterogeneous flow path distributions N2 - Geogenic gases from natural sources, carbon dioxide (CO2) from a geological repository (carbon capture and storage - CCS) or a leaking gas pipeline can present serious risks in industrial and urban areas. To extend the lead time for risk treatment in such critical regions, reliable detection of gases within the shallow subsurface is required to observe critical gas accumulations before degassing into the atmosphere. A near real-time monitoring approach is introduced to determine the volumetric expansion of a leakinggas in the subsurface. Considering the pressure relaxation with the ambient air pressure, the approach enables the forecasting of the final size of a pressurized gas body in terms of characteristic lengths. According to theoretical basics, such a characteristic length, which enables us to perform a gas (safety) measurement based on a purely geometrical measure, behaves independently of subsurface properties,i.e., it enables a reliable quantification of the escaping gas irrespective of its heterogeneous or changingflow path distribution. A field test for a 10 l/min pinhole leakage injected into a 10 m long, 0.4 m wide, 0.95 m deep soil-filled trench that was equipped with linear sensors shows the lateral-vertical volumetric gas expansion along these sensors, and demonstrates the applicability of the characteristic length approach. KW - Monitoring KW - Carbon capture and storage KW - Leakage KW - Quantification KW - Subsurface KW - CO2 PY - 2016 DO - https://doi.org/10.1016/j.ijggc.2016.02.008 SN - 1750-5836 VL - 2016 IS - 47 SP - 330 EP - 341 PB - Elsevier B.V. AN - OPUS4-35425 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger T1 - Extending interim storage of spent nuclear fuel: what are the needs and consequences? N2 - This presentation addresses the current German policy in nuclear waste management and illustrates significant changes throughout the last decades. With the reset of the high level waste repository siting process in 2013 the need for extending interim storage beyond initial license periods will become a future challenge. For that purpose knowledge needs to be enhanced and data gaps need to be closed timely. In addition, international collaboration in R&D and regulatory improvements are explained. T2 - NDC2016 7th Annual Nuclear Decommissioning Conference CY - Manchester, UK DA - 31.05.2016 KW - Nuclear waste management KW - Diposal KW - Storage cask KW - Safety KW - Extended storage PY - 2016 AN - OPUS4-36353 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger T1 - Integration across storage, transportation and disposal – important elements of the German program N2 - This presentation addresses the following issues. Unexpected changes in national nuclear policy have significantly affected spent fuel management strategies. The initial German spent fuel and HLW disposal concept has been delayed and finally “reset” by federal law in 2013. Repository site selection criteria and procedures will be defined by the Disposal Commission’s report end of June 2016. Final site selection should be finished by 2031. The consistent German concept of dry interim storage in dual purpose casks has proven to be a safe and secure spent fuel management strategy. The need for the extended interim storage of spent fuel and HLW casks towards disposal implicates additional challenges for the nuclear waste management strategy in Germany. Recently, governmental research programs have been adjusted to address technical and scientific issues also in the predisposal area. Interim storage, subsequent transportation, and final disposal are closely linked. Integrated approaches concerning waste package designs and operations are supposed to be beneficial for the establishment of efficient long-term spent fuel and HLW management strategies. T2 - Reset of U.S. Nuclear Waste Management Strategy and Policy Meeting CY - Washington, D.C., USA DA - 17.05.2016 KW - Nuclear waste management KW - spent fuel storage KW - extended storage KW - nuclear waste disposal PY - 2016 AN - OPUS4-36354 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -