TY - CHAP A1 - Müller, P. A1 - Fontana, Patrick A1 - Miccoli, Lorenzo A1 - Ziegert, C. ED - Jäger, W. T1 - Versuchsgestützte Kalibrierung von Teilsicherheitsbeiwerten im Lehmmauerwerksbau - Empfehlungen für die Erarbeitung eines Bemessungskonzepts T2 - Mauerwerk-Kalender 2017 - Befestigungen, Lehmmauerwerk N2 - Ziel der vorliegenden Untersuchung war es zu überprüfen, inwiefern eine Bemessungsvorschrift auf Basis von Teilsicherheitsbeiwerten im Lehmmauerwerksbau möglich ist. Bemessungsvorschriften im konventionellen Mauerwerksbau und im Lehmmauerwerksbau waren aufgrund des prinzipiell gleichen Tragverhaltens stets eng miteinander verknüpft. Die im Rahmen dieser Arbeit durchgeführten Druckversuche an Lehmmauermörtel, Lehmsteinen und Lehmmauerwerk konnten zeigen, dass die Streuungen der Festigkeiten von Lehmbaustoffen aufgrund der industriellen Herstellung sehr gering sind. Es konnte festgestellt werden, dass eine Bemessung auf Grundlage des semiprobabilistischen Bemessungskonzeptes in Anlehnung an den konventionellen Mauerwerksbau möglich ist. Neben einem ersten Vorschlag des Teilsicherheitsbeiwertes für den Lastzustand Druck werden Vorschläge für Prüfvorschriften im Lehmbau beziehungsweise deren Modifikation unterbreitet und künftige Forschungsschwerpunkte herausgearbeitet. KW - Baustoffe KW - Lehmmauerwerk KW - Lehmbau KW - Teilsicherheitsbeiwert KW - Zuverlässigkeit KW - Druckfestigkeit KW - Prüfverfahren KW - Bemessung KW - Normung KW - Feuchteabhängige Festigkeit PY - 2017 SN - 978-3-433-03161-2 SP - 181 EP - 194 PB - Ernst & Sohn CY - Berlin AN - OPUS4-39628 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Szypkowski, Marko ED - Bartmann, Hubertus T1 - Taucher-Handbuch, Technik, Tauchgeräte - Bauteile und Baugruppen für Leichttauchgeräte, Kap. Flaschenventile T2 - Bartmann Taucher-Handbuch, 102. Erg. Lfg. 09/2017 N2 - In dem Handbuch für Tauchgeräte behandelt das Kapitel "Flaschenventile" alle technisch und rechtlich relevanten Themenbereiche für die Anwender. Hier Fortsetzung Teil 2 KW - Flaschenventile KW - Atemschutz KW - Tauchen KW - Druck KW - Ventile PY - 2017 SN - 978-3-609-75380-5 SP - Kap. III -1.2.3.1.5, 27 EP - 51 PB - Stork Verlag CY - Landsberg am Lech ET - 102 AN - OPUS4-42480 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Sproesser, G. A1 - Change, Y.-J. A1 - Pittner, Andreas A1 - Finkbeiner, M. A1 - Rethmeier, Michael ED - Stark, R. ED - Bonvoisin, J. ED - Seliger, G. T1 - Sustainable technologies for thick metal plate welding T2 - Sustainable Manufacturing Challenges, Solutions and Implementation Perspectives N2 - Welding is the most important joining technology. In the steel construction industry, e.g. production of windmill sections, welding accounts for a main part of the manufacturing costs and resource consumption. Moreover, social issues attached to welding involve working in dangerous environments. This aspect has unfortunately been neglected so far, in light of a predominant focus on economics combined with a lack of suitable assessment methods. In this chapter, exemplary welding processes are presented that reduce the environmental and social impacts of thick metal plate welding. Social and environmental Life Cycle Assessments for a thick metal plate joint are conducted for the purpose of expressing and analysing the social and environmental impacts of welding. Furthermore, it is shown that state-of-the-art technologies like Gas Metal Arc Welding with modified spray arcs and Laser Arc-Hybrid Welding serve to increase social and environmental performance in contrast to common technologies, and therefore offer great potential for sustainable manufacturing. KW - Human health G. KW - Life cycle assessment (LCA) KW - Arc welding KW - Laser arc-hybrid welding KW - Resource efficiency KW - Social life cycle assessment (SLCA) PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-390025 SN - 978-3-319-48513-3 SN - 978-3-319-48514-0 DO - https://doi.org/10.1007/978-3-319-48514-0 SN - 2194-0541 SN - 2194-055X SP - 71 EP - 84 PB - Springer CY - Cham, Switzerland AN - OPUS4-39002 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Zerbst, Uwe A1 - Hilgenberg, Kai ED - Richard, H. A. ED - Zipsner, T. ED - Schramm, B. T1 - Schadensentwicklung und Schadenstoleranz von SLM-gefertigten Strukturen T2 - Additive Fertigung von Bauteilen und Strukturen N2 - Unterschiedliche Werkstoffeigenschaften reagieren auf jeweils spezifische Weise auf Gittertyp, Gefüge und Defekte. Für die schadenstolerante Betrachtung von Werkstoff und Bauteil ist das Verständnis dieser Zusammenhänge essentiell. Der Beitrag gibt mit Hinblick auf additiv gefertigte metallische Bauteile mittels Selective Laser Melting einen kurzen, keineswegs vollständigen Überblick über Faktoren, die die Steifigkeit, Festigkeit, Duktilität, Zähigkeit, Ermüdungsrissausbreitung und Schwingfestigkeit beeinflussen. Es wird aufgezeigt, wie die bruchmechanische Betrachtung zur Quantifizierung der Zusammenhänge beitragen kann. KW - Additive Fertigung KW - Selective Laser Melting (SLM) KW - Werkstoffeigenschaften KW - Schadenstoleranz KW - Bruchmechanik PY - 2017 SN - 978-3-658-17779-9 DO - https://doi.org/10.1007/978-3-658-17780-5 SP - 241 EP - 270 PB - Springer Vieweg CY - Wiesbaden AN - OPUS4-40162 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Farag, Zeinab A1 - Moustapha, M. A1 - Hidde, Gundula A1 - Friedrich, Jörg A1 - Azzam, M. A1 - Krüger, Simone ED - Mital, K.L. T1 - Promotion of Adhesion of Green Flame Retardant Coatings onto Polyolefins by Depositing Ultra-Thin Plasma Polymer Films T2 - Progress in adhesion and adhesives N2 - Various methods have been used for introducing fire retardant additives into polymers. Deposition of thick fire retardant coatings directly onto polymer substrates is an alternative technique. An important advantage of the coating technique is the preservation of the physical and chemical integrity of the polymer material. Moreover, the fire retardancy of the polymer materials can be achieved following their production. Suitable coating materials are inorganics, intumescent, char-forming, oxygendiluting, and cooling or radical quenching layers. The most important problem is to achieve sufficient coating thickness to withstand the direct attack of flame and to protect the polymer bulk from pyrolysis, otherwise blistering of coating, caused by emitted pyrolysis gases, is often observed. To avoid blistering of coating, the adhesion between polyolefin substrate and fire retardant coating has to be extraordinarily high. In order to achieve such a high level of adhesion, the polymer surface has to be modified with adhesion-promoting functional groups. The deposition of thin plasma polymers as adhesion-promoting layers with NH2, OH or COOH groups has been the most suited method. These functional groups are able to form covalent bonds and other interactions between the fire-resistant coating and the plasma-modified polyolefin substrate. Additionally, the plasma polymer counteracts the strong mechanical stresses in the laminate on exposure to high temperatures by its flexibility. KW - Plasma KW - Adhesion PY - 2017 SN - 978-1-119-40748-5 SN - 978-1-119-40638-9 DO - https://doi.org/10.1002/9781119407485 VL - 2 SP - 399 EP - 427 PB - Scrivener Publishing CY - Beverly, USA AN - OPUS4-47227 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Browne, D. A1 - García-Moreno, F. A1 - Nguyen-Thi, H. A1 - Zimmermann, G. A1 - Kargl, F. A1 - Mathiesen, R. H. A1 - Griesche, Axel A1 - Minster, O. ED - Solanki, K. N. ED - Orlov, D. ED - Singh, A. ED - Neelameggham, N. R. T1 - Overview of In situ X-ray studies of light alloy solidification in microgravity T2 - Magnesium Technology 2017 N2 - Gravity has significant effects on alloy solidification, primarily due to thermosolutal convection and solid phase buoyancy. Since 2004, the European Space Agency has been supporting investigation of these effects by promoting in situ X-ray monitoring of the solidification of aluminium alloys on microgravity platforms, on earth, and in periodically varying g conditions. The first microgravity experiment-investigating foaming of liquid metals - was performed on board a sounding rocket, in 2008. In 2012 the first ever X-ray-monitored solidification of a fully dense metallic alloy in space was achieved: the focus was columnar solidification of an Al-Cu alloy. This was followed in 2015 by a similar experiment, investigating equiaxed solidification. Ground reference experiments were completed in all cases. In addition, experiments have been performed on board parabolic flights-where the effects of varying gravity have been studied. We review here the technical and scientific progress to date, and outline future perspectives. KW - Dendritic growth KW - Materials in space KW - Columnar and equiaxed structures PY - 2017 SN - 978-3-319-52392-7 SN - 978-3-319-52391-0 DO - https://doi.org/10.1007/978-3-319-52392-7_80 SN - 2367-1181 SP - 581 EP - 590 PB - Springer CY - Berlin, Heidelberg AN - OPUS4-39442 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Miccoli, Lorenzo A1 - Garofano, A. A1 - Fontana, Patrick A1 - Müller, U. ED - Jäger, W. T1 - Modellierung der mechanischen Eigenschaften von Lehmsteinmauerwerk unter statischer Druck- und Schubbeanspruchung T2 - Mauerwerk-Kalender 2017 - Befestigungen, Lehmmauerwerk N2 - In diesem Beitrag werden numerische Analysen der mechanischen Eigenschaften von Lehmsteinmauerwerk unter Druck- und Schubbeanspruchung vorgestellt. Ergebnisse von einachsigen Druck- und Schubversuchen an Wandprüfkörpern lieferten dafür grundlegende mechanische Kennwerte im elastischen Bereich und im nichtelastischen Versagenszustand.Die Testergebnisse zeigten, dass verschiedene Vorlasten keinen wesentlichen Einfluss auf die Schubfestigkeit haben. Außerdem bestätigten die Ergebnisse das spröde Verhalten von Lehmsteinmauerwerk unter einachsiger Druckbelastung und es zeigte sich, dass das Versagen des Lehmsteinmauerwerks unter Scherbelastung entlang der Mörtelfugen erfolgt. Die experimentellen Ergebnisse wurden verwendet, um das Verhalten von Lehmsteinmauerwerk durch nichtlineare Finite-Elemente-Methoden auf der Basis von Makro- und Mikro-Modellierungsansätzen zu simulieren. Entsprechendes konstitutives Materialverhalten und Zwängungen, die in den Versuchen durch die Art der Lasteinleitung in Form von Stahlprofilen und Stahlschuhen verursacht wurden, wurde in den Modellen berücksichtigt. Es wurde zuerst ein auf der Grundlage der experimentellen Daten kalibriertes Makro-Modell entwickelt, was zu einer brauchbaren Vorhersage des Versagensverhaltens der Mauerwerksprüfkörper führte. Die simulierten Spannungs-Dehnungs-Kurven, berechnet unter einachsiger Druckbelastung, zeigten eine gute Übereinstimmung mit den Ergebnissen der geprüften Mauerwerkskörper, sowohl im elastischen als auch im nichtelastischen Bereich. Ein vereinfachter Ansatz, basierend auf der Makro-Modellierung und einem homogenisierten Prüfkörper, kann für die Untersuchung größerer Tragsysteme oder ganzer Gebäude angewendet werden, wobei eine zufriedenstellende Genauigkeit bei geringerem Rechenaufwand erreicht wird. Obwohl das globale Spannungs-Dehnungs-Verhalten zufriedenstellend wiedergegeben wurde, ist ein solches nichtlineares isotropes Kontinuumsmodell für Lehmsteinmauerwerk nicht in vollem Umfang geeignet, um das bei den Versuchen beobachtete Rissbild an den Prüfkörpern zu simulieren. Eine detailliertere Analyse des mechanischen Verhaltensdes Mauerwerks wurde mit einem Mikro-Modellierungsansatz durchgeführt. Das Modell, in dem ein Wandabschnitt nicht mehr homogenisiert, sondern in konkrete Stein- und Fugenelemente diskretisiert wird, hat sich insbesondere für das Verhalten von Lehmsteinmauerwerk unter Schubbeanspruchung als geeignet erwiesen. Die Auswertung der Spannungsverteilungen bei der nichtlinearen Analyse lieferte Informationen über die tatsächlichen Mechanismen der Lastübertragung zwischen Steinen und Mörtelfugen. Mit dem Mikro-Modell war es möglich, das nichtlineare Verhalten von Lehmsteinmauerwerk vorherzusagen. Es stellt somit ein geeignetes Werkzeug für die Untersuchung der Versagensmechanismen von Lehmsteinmauerwerk dar. Allerdings sind aufgrund der Komplexität des Modells für die Beschreibung der Stein/Mörtel-Schnittstelle und die hohe Anzahl an erforderlichen mechanischen Parametern umfassendere Untersuchungen notwendig. Die zukünftige Forschung wird sich daher einerseits auf die Verfeinerung der numerischen Modelle und andererseits auf die Simulation komplexer Belastungssituationen und Gebäudekomponenten konzentrieren. KW - Lehmsteinmauerwerk KW - Mechanische Eigenschaften KW - Statische Druck- und Schubbeanspruchung KW - Lehmbau KW - Baustoffe PY - 2017 SN - 978-3-433-03161-2 SP - 195 EP - 208 PB - Ernst & Sohn CY - Berlin AN - OPUS4-39631 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Resch-Genger, Ute ED - Schäferling, Michael T1 - Luminescent nanoparticles for chemical sensing and imaging T2 - Reviews in Fluorescence 2016, Book Series: Reviews in Fluorescence N2 - The implementation of fluorescent methods is of outstanding importance in the field of optical chemical sensor Technology and biosciences. Their bioanalytical applications are manifold including fluorescence microscopy, fluorescence in situ hybridization, DNA sequencing, fluorescence-activated cell sorting, immunoassays, analysis of DNA and Protein microarrays, and quantitative PCR, just to name a few examples. Particularly, fluorescence microscopy is a valuable method in the versatile field of biomedical imaging methods which nowadays utilizes different fluorescence Parameters like emission wavelength/Color and lifetime for the discrimination between different targets. Sectional Images are available with confocal microscopes. Tissue, cells or single cellular compartments can be stained and visualized with fluorescent dyes and biomolecules can be selectively labeled with fluorescent dyes to Monitor biomolecular interactions inside cells or at Membrane bound receptors. On the other hand , fluorophores can act as indicator (or "molecular probe") to visualize intrinsically colorless and non-fluorescent ionic and neutral analytes such as pH, Oxygen (pO2), metal ions, anions, hydrogen peroxide or bioactive small organic molecules such as Sugars or nucleotides. Thereby, their photoluminescent properties (fluorescence or phoporescence intensity, exitation and/or Emission wavelength, emission lifetime or anisotropy) respond to the presence of these species in their immediate Environment. In general, the use of luminescent probes has the advantage that they can be delivered directly into the sample, and detected in a contactless remote mode. By now, these probes are often encapsulated in different types of nanoparticles (NPs) made from (biodegradable) organic polymers, biopolymers or inorganic materials like silica or bound to their surface. KW - Fluorescence KW - Upconversion KW - NIR KW - Sensor KW - Nanoparticle KW - Surface chemistry KW - Quantum yield KW - Liftetime KW - Nanocrystal KW - Lanthanide KW - Semiconductor KW - Polymer KW - Silica KW - Imaging KW - Application KW - Dye KW - Quantum dot PY - 2017 SN - 978-3-319-48260-6 SN - 978-3-319-48259-0 DO - https://doi.org/10.1007/978-3-319-48260-6_5 SN - 1573-8086 SP - 71 EP - 109 PB - SPRINGER INTERNATIONAL PUBLISHING AG CY - Cham, Schweiz AN - OPUS4-44011 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Rhode, Michael A1 - Münster, C. A1 - Mente, Tobias A1 - Böllinghaus, Thomas ED - Somerday, B.P. ED - Sofronis, P. T1 - Influence of experimental conditions and calculation method on hydrogen diffusion coefficient evaluation at elevated temperatures T2 - International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments N2 - Literature provides a wide range of hydrogen diffusion coefficients for low alloyed steels used in power plants. In fact, experimental boundary conditions and calculation methods have influence on the determination of these coefficients. The diffusion and trapping behavior in creep-resistant steel 7CrMoVTiB10-10 has been studied. Based on experimental carrier gas hot extraction (CGHE) data, a numerical model has been developed to describe the hydrogen transport and respective hydrogen distribution at elevated temperatures. The numerical results suggest that common calculation methods for diffusion coefficients are limited for experimental data analysis. The sample preparation time before CGHE experiment influences the determined diffusion coefficients with the consequence that non-homogeneous hydrogen concentration profiles have to be considered in the simulations. KW - Temperature effect KW - Hydrogen diffusion KW - Creep-resistant steel KW - Hydrogen assisted cracking KW - Carrier gas hot extraction PY - 2017 SN - 978-0-7918-6138-7 DO - https://doi.org/10.1115/1.861387_ch56 SP - 495 EP - 503 PB - ASME CY - New York, USA ET - 1 AN - OPUS4-42502 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Torge, Manfred A1 - Drachenberg, D. A1 - Oleszczuk, S. ED - Hinterkeuser, G. ED - von Krosigk, K.-H. ED - Schabe, P. T1 - Erhaltung historischer Glasmalereien in Niederschlesien (Dolny Slask) und Kujawien (Kujawy) T2 - Kulturerbe verpflichtet. Zehn Jahre Deutsch-Polnische Stiftung Kulturpflege und Denkmalschutz - Bilanz und Zukunft N2 - Im Beitrag wird über die mühevolle Sanierung von Objekten eines Kunstzweiges in Polen berichtet, der eine besondere diffizile Stellung in der langen Reihe von Werken der Kunst einnimmt. Es geht dabei um die bleiverglasten farbigen Fensterverschlüsse in Kirchen oder Profangebäuden. Das sind feingliedrige Gitterwerke aus zerbrechlichen und korrosionsanfälligen Materialien, die durch aggressive Umweltschadstoffe schweren Belastungen ausgesetzt sind. Wie bei keinem anderen Kunstzweig haben die einzelnen Bestandteile der Glasmalerei sowohl praktisch-technische als auch ästhetisch-künstlerische Aufgaben zu erfüllen. Bei der Restaurierung dieser Glasmalereifenster geht darum, neuentwickelte Methoden der Restaurierung oder Konservierung anzuwenden und letzte Erkenntnisse naturwissenschaftlicher Forschung zu nutzen. Diese Projekte sind ein Beispiel der interdisziplinären Zusammenarbeit zwischen Denkmalpflegern, Naturwissenschaftlern und Restauratoren aus Deutschland und Polen. An ausgewählten Restaurierungsobjekten wird von der fachgerechten, denkmalpflegerisch verantwortungsbewussten Arbeit berichtet. KW - Glasmalereien KW - Außenschutzverglasung KW - Klimamessungen KW - Luftschadstoffe PY - 2017 SN - 978-3-86732-293-5 SP - 305 EP - 318 PB - Lukas Verlag für Kunst- und Geistesgeschichte CY - Berlin ET - 1. Auflage AN - OPUS4-43236 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Rosenfeld, A. A1 - Höhm, S. A1 - Krüger, Jörg A1 - Bonse, Jörn ED - Reedijk, J. T1 - Dynamics of ultrashort double-pulse laser ablation of solid surfaces T2 - Reference Module in Chemistry, Molecular Sciences and Chemical Engineering, Encyclopedia of Interfacial Chemistry: Surface Science and Electrochemistry N2 - Given their unique properties, ultrashort laser pulses with durations in the femtosecond to picosecond range currently open new avenues in the field of laser materials processing, resulting in groundbreaking new applications based on laser-induced surface functionalization. This article reviews the usability of temporally distributed energy deposition via double-pulse irradiation in applications based on laser ablation. This includes simple new techniques for surface nanostructuring and improved sensitivities in spectroscopic material analyses. KW - Carrier excitation KW - Double-pulse KW - Interferometer KW - Laser ablation KW - Femtosecond PY - 2017 UR - https://www.sciencedirect.com/science/article/pii/B9780124095472141277 SN - 978-0-12-409547-2 DO - https://doi.org/10.1016/B978-0-12-409547-2.14127-7 SP - 1 EP - 10 PB - Elsevier AN - OPUS4-43594 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Miccoli, Lorenzo ED - Visone, M. ED - Carughi, U. T1 - China T2 - Time Frames - Conservation Policies for Twentieth-Century Architectural Heritage N2 - The contributions included in the book provide a reconnaissance on the conservation rules and current protection policies of more than 100 countries, with particular attention to the emerging nations and twentieth-century architecture. The contributions illustrate the critical issues related to architectural listings, with a brief history of national approaches, a linkography and a short bibliography. The book also provides a short critical lexicography, with 12 papers written by scholars and experts including topics on identities, heritages, conservation, memories and the economy. By examining the methods used to designate building as heritage sites across the continents, this book provides a com¬prehensive overview of current protection policies of twentieth-century architecture as well as the role of architectural history. KW - Building Materials KW - Cultural Heritage protection KW - Historical Buildings PY - 2017 SN - 978-1-47-248929-6 SP - 126 EP - 128 PB - Routledge Taylor & Francis Group CY - London AN - OPUS4-39791 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -