TY - CONF A1 - Falkenhagen, Jana T1 - Error margins in the Determination of Molar Mass and Oligomer Content of Polymers N2 - Size exclusion chromatography (SEC) is still the method of choice for determining the molar mass and molar mass distribution of macromolecules. It is a liquid chromatographic technique that separates molecules based on their size, respectively their hydrodynamic volume using a porous stationary phase that allows smaller molecules to pass through the pores while excluding larger molecules. The chromatogram from the size separation can be calibrated using polymers of known molar mass resulting in a relative molar mass distribution curve. From this distribution curve molar mass averages and the oligomer content (percentage of peak area smaller than 1000 g/mol and 500 g/mol) of polymers can be derived. The determination of oligomer content is important, because it is often used in regulatory contexts as a measure of small, mobile and potentially more toxic parts of the polymer. Polymer regulations are of increasing political and social importance. Regulations often set very narrow limits. SEC has rather large error margins of 10-20% for the molar mass determination performed in different laboratories or on different instruments. These variances are well known to all experts and users and have been investigated in several round robin tests in the past. These resulted in DIN and ISO standards which, in our opinion, no longer meet today's requirements. As far as we know, the margins of error in determining oligomer content have not yet been investigated. It is expected that the variation will be rather high. This is because it depends on many factors related to the experimental conditions (column sets used, solvent, temperatures, sample preparation) on the one hand, and the data evaluation mechanisms (choice of baseline and peak limits) on the other. In order to actually measure the error margins and to support this with actual data a round robin test has been performed from June to November 2024 with approx. 40 participating laboratories. Three different solvents were selected, namely THF, DMAc or DMF and water. The samples were selected together with all the experts, taking into account a wide range of practical aspects far from narrowly distributed standards: e.g higher distribution range, reduced solubility, included side components, copolymers and dispersions with gel content. In this contribution we will present the detailed concept of this round robin test and first results. T2 - SETAC Europe 35th Annual Meeting CY - Vienna, Austria DA - 11.05.2025 KW - Size exclusion chromatography KW - REACH KW - Polymers KW - Round Robin Tests PY - 2025 AN - OPUS4-63307 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Falkenhagen, Jana T1 - Limitations of SEC: Strategies for Improved Regulatory Polymer Analysis N2 - Polymers, composed of repeating units called monomers, exhibit a diverse range of properties, with molecular weight distribution (MWD) being particularly important for regulatory risk assessments. Size exclusion chromatography (SEC), or gel permeation chromatography (GPC), is the primary technique for MWD characterization, as detailed in OECD guidelines 118 and 119, along with DIN and ISO standards. However, SEC faces significant shortcomings that complicate the accurate determination of MWD and oligomer content. These limitations include the insolubility of certain polymers, crosslinking, and ultra-high molecular weight characteristics, which can exceed SEC's separation capabilities. The presence of salts or modifiers can further interfere with oligomer content determination, and the availability of appropriate SEC columns and calibration standards limits comparability across laboratories. To enhance SEC's reliability and applicability within regulatory frameworks, innovative methods and strategies are essential. Proposed solutions involve new sample preparation techniques, advanced data interpretation methods, and the establishment of standardized methodologies to promote harmonization. This is especially crucial in light of the expected Polymer REACh (PREACh) legislation, which aims to regulate polymer registration and risk assessment within the European market. Given the anticipated complexity of the registration process, which requires extensive data generation, proactive strategies are needed to address SEC's challenges. Currently, there are no viable alternatives for oligomer content determination, and the unique properties of polymers often necessitate tailored analytical approaches. Without new methodologies and guidelines, the polymer registration process could become burdensome and costly, jeopardizing important products and markets in the EU. Key areas for improvement include extending existing norms to cover a broader range of solvents, addressing high error margins in oligomer content determination, establishing harmonized approaches for dealing with side components, and providing clarity on measuring partially soluble polymers. In conclusion, addressing SEC's limitations through the development of comprehensive guidelines and harmonization is critical for ensuring accurate and efficient polymer analysis, ultimately facilitating smoother registration processes. T2 - SETAC Europe 35th Annual Meeting CY - Vienna, Austria DA - 11.05.2025 KW - Size exclusion chromatography KW - Polymers KW - REACH PY - 2025 AN - OPUS4-63309 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weber, Simone T1 - Influence of the pH Value to the Degradation of Ester-Based Thermoplastic Polyurethanes N2 - Microplastics are solid polymeric particles with a size of 1-1000 μm (ISO/TR21960:2020), which can be emitted from mismanaged waste into the environment, where microplastic is now ubiquitous. What happens to the microplastics after ending up in the environment, which risks entail and what effects it has are not sufficiently clarified up to now. The most certain issue is that the plastic particles in the environment are exposed to natural ageing, are fragmenting and degrading, such that the potential risk to ecosystems and humans is increasing due to the formation of smaller and smaller particles, potentially even including nanoplastics, if these are ingested before their further degradation. Therefore, and in view of a possible registration of polymers under REACH in the future, it is necessary to investigate the degradation of thermoplastic polyurethanes (TPU) regarding hydrolysis stability to evaluate possible risks and effects to the environment. In the present studies, one thermoplastic polyurethane – with and without hydrolysis stabilizer – is exposed to different pH buffers at 50°C for 14 days to investigate hydrolysis depending to different pH values (acid, alkali and neutral) based on OECD guideline TG111. The hydrolysis behavior of the TPUs is characterized by surface sensitive techniques and on bulk properties. First degradation effects can be detected by SEC. Hydrolysis, especially under acidic and basic conditions, leads to chain scissions to lower molecular masses. Furthermore, the degradation products which indicate the structure of the bulk material were detected by thermo-analytical methods like TGA-FTIR for the small degradation products and the thermo extraction/desorption-gaschromatography/mass spectrometry (TED-GC/MS) for bigger degradation products. Acidic and basic hydrolysis shows the same degradation behavior which is caused by a preferred scission of the ester and urethane functionalities. Surface-sensitive techniques such as XPS demonstrate less carboxylic acid formation at acidic than at alkaline pH value in the TPU without stabilator, where as the TPU with stabilator ages to the same extent in both pH ranges. Altogether, the hydrolysis of TPUs – independently of added stabilizer or not – in acid and alkali environment is accelerated compared to the neutral hydrolysis. T2 - SETAC CY - Dubin, Ireland DA - 30.04.2023 KW - Degradation KW - Thermoplastic Polyurethane KW - Microplastic KW - Polymer Hydrolysis KW - Polymer 3R KW - REACH PY - 2023 AN - OPUS4-58906 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -