TY - CONF A1 - Woydt, Mathias T1 - 2015 SRV global circular comparison results bulletin N2 - Tribological profile of hydraulic oils by using SRV. The determination of a set of critical, tribological by using different SRV-based test methods. The SRV-based concept of tribological profile generates the wear volumes on two triboelements (specimen), the extreme pressure properties and friction under different contact pressures. Thus, the benchmark and validation of hydraulic oils bear on a wider range of tribological properties. The RR2016 extends with six hydraulic oils to other base oil types including biodegradable fluids, which were all tested according to ASTM D7043 in order to consolidate the correlation between SRV and V104C. T2 - Working Group Meeting about SRV in China 2016 CY - Beijing, China DA - 05.04.2016 KW - SRV KW - Standards KW - China PY - 2016 AN - OPUS4-35744 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - 2016 SRV global circular comparison results bulletin N2 - Actions from the meeting in April 2016: 1. Four SAC test methods are in place and were revised: SH/T 0721 (Grease, coefficient of friction and wear), SH/T 0784 (Grease, pass load/O.K. load), SH/T 0847 (Oil, coefficient of friction and wear) and SH/T 0882 released by 11-2014 (Oil, pass load/O.K. load). 2. New test method to evaluate anti-fretting properties of greases based was approved by SAC TC280 and will be released. 3. SAC TC280 accepted the project “Simulation of synchronizer by using SRV”. Draft text to be submitted by 03-2017. Discussions on a parallel ASTM test method. 4. A procedure for “Wear Volume” is under development for SAC TC280. T2 - Working Group Meeting about SRV in China 2016 CY - Beijing, China DA - 05.04.2016 KW - SRV KW - Standards KW - China PY - 2016 AN - OPUS4-35745 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - Recent work of the global SRV working group and the development trend of SRV standards N2 - „Cliff“-testing by using SRV The identification in engine or gear tests of the induction time or off-set point („cliff“), after which wear and friction increased. “Cliff” testing as auxiliary method supports the interpretation of engine tests, as it enhances the values of expensive engine tests, because it enables correlations between friction & wear, either from engine or in SRV tests, with additive depletion, oxidation, viscometrics and dispersancy/detergency. Oil samples taken in discrete intervals and “Cliff” tested monitors the evolution of tribological and functional properties versus engine running time. “Cliff” testing by using SRV is a purposeful tool in order to secure and accelerate metallurgical developments and the development of lubricant formulations. T2 - Working Group Meeting about SRV in China 2016 CY - Beijing, China DA - 05.04.2016 KW - SRV KW - Standards KW - China PY - 2016 AN - OPUS4-35747 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -