TY - CONF A1 - Uhlmann, E. A1 - Kropidlowski, K. A1 - Sammler, F. A1 - Richarz, S. A1 - Woydt, Mathias T1 - Niobium carbide as an alternative cutting tool material N2 - Niobium carbide (NbC) is an alternative cutting material. The Federal Institute for Materials Research and Testing (BAM) and the Institute for Machine Tools and Factory Management (IWF) of the TU Berlin assessed the cutting suitability of NbC with cobalt (Co)-binder compared to WC with Co-binder in the machining of a wide range of materials. T2 - 10th Tool Conference 2016 - TOOL 2016 CY - Bratislava, Slovakia DA - 04.10.2016 KW - Niobium carbide (NbC) KW - Tungsten carbide (WC) KW - Cutting material KW - Tool wear KW - Turning trials KW - Wear mechanisms PY - 2016 SN - ISBN 978-3-200-04786-0 SP - 365 EP - 373 AN - OPUS4-37870 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Harsha, A. P. A1 - Wäsche, Rolf T1 - Influence of temperature on friction and wear characteristic of polyaryletherketones and their composites under reciprocating sliding condition N2 - In the present work it was shown the tribological behavior of different polyaryletherketones (PAEKs) and their composites under reciprocating sliding conditions at room temperature as well as at elevated temperature (120°C). KW - Composite KW - PAEKs KW - Reciprocating sliding KW - Solid lubricants KW - Wear mechanisms PY - 2018 U6 - https://doi.org/10.1007/s11665-018-3633-y SN - 1059-9495 VL - 27 IS - 10 SP - 5438 EP - 5449 PB - Springer AN - OPUS4-46430 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Uhlmann, E. A1 - Kropidlowski, K. A1 - Woydt, Mathias A1 - Sammler, F. T1 - Cutting tools made from niobium carbide N2 - Niobium carbide (NbC) presented recently excellent Performance as cutting material for processing iron-based materials. Ist high hot hardness and low solubility in alloys make it a promising tool material for the future. T2 - 19. Plansee Seminar CY - Reutte, Austria DA - 29.05.2017 KW - Niobium carbide (NbC) KW - Tungsten carbide (WC) KW - Cutting material KW - Tool wear KW - Turning trials KW - Wear mechanisms PY - 2017 SP - HM 105/1 EP - HM 105/11 AN - OPUS4-40594 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -