TY - CONF A1 - Gradt, Thomas A1 - Theiler, Géraldine T1 - Materials for tribosystems in hydrogen technology N2 - In this presentation tribological investigations on steels, polymers and coatings in gaseous and liquid hydrogen are shown. For steels the results of show that although martensitic steel may suffer from hydrogen embrittlement, application e.g. in roller bearings is possible. On the other hand, martensitic transformation of austenitic steels may cause problems in the application of these materials. Furthermore, the tribological performance of polymer composites with and without solid lubricant fillers in gaseous and liquid hydrogen was investigated. In particular, PEEK- and PTFE-matrix compounds showed low friction and sufficient low wear under these conditions. Among the solid lubricants, carbon-based materials are appropriate for hydrogen applications. Several variants of DLC and ta-C materials were tested. Beside the results for hydrogen, also a comparison with CH4-environment is shown. T2 - ÖTG-Symposium 2021 CY - Online meeting DA - 18.11.2021 KW - Hydrogen environment KW - Liquid hydrogen KW - Austenitic stainless steels KW - Polymer composites KW - DLC PY - 2021 AN - OPUS4-53793 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -