TY - THES A1 - Thomas, Maximilian T1 - Verbesserung der Übertragbarkeit von Erstarrungsrissprüfungen nach dem MVT-Verfahren durch Digitalisierung der Probenauswertung N2 - Zur Prüfung der Erstarrungsrissanfälligkeit von Werkstoffen existiert eine Vielzahl von Prüfverfahren, die jedoch oft nur in ihren Grundzügen standardisiert sind. Ein Beispiel ist der an der Bundesanstalt für Materialforschung und -prüfung entwickelte und angewendete Modifizierte Varestraint-/Transvarestraint-Test (MVT), der eine von vielen Umsetzungen des Varestraint-Verfahrensprinzips darstellt. Hierbei werden durch Biegung während des Schweißens gezielt Erstarrungsrisse erzeugt und anschließend lichtmikroskopisch vermessen. Die Ergebnisse von Varestraint-Prüfungen charakterisieren jedoch nicht allein das Werkstoffverhalten, sondern sind in hohem Maße von der Konstruktion der jeweiligen Prüfmaschine sowie den verwendeten Prüfparametern abhängig. Dies erschwert die Vergleichbarkeit von Ergebnissen, welche nicht unter exakt identischen Bedingungen ermittelt wurden, und kann darüber hinaus zu einer ungenauen oder unvollständigen Bewertung des Werkstoffverhaltens führen. Die vorliegende Arbeit widmet sich zunächst der detaillierten Ausgestaltung der geometrischen Zusammenhänge rund um die Ausbreitung von Erstarrungsrissen während der Varestraint-Prüfung. Mit Blick auf Prokhorovs Technological Strength Theory und die sich daraus ergebenden erstarrungsrisskritischen Temperaturen wird anschließend eruiert, wie aus den Anfangs- und Endkoordinaten der entstandenen Risse auf das charakteristische Erstarrungsrissverhalten geschlossen werden kann. Die daraus entwickelte Bewertung der Rissanfälligkeit ist weitestgehend von den Prüfparametern und weiteren verfahrensspezifischen Einflüssen entkoppelt, wodurch eine deutlich bessere Übertragbarkeit der Ergebnisse gewährleistet ist. Zur Erprobung der neu entwickelten Bewertungsansätze wurden zunächst MVT-Prüfungen an mehreren hochlegierten, martensitischen Schweißzusatzwerkstoffen, sowie am Nickelbasiswerkstoff Alloy 602 CA durchgeführt. So konnten einerseits verschiedene Legierungen hinsichtlich ihres Erstarrungsrissverhaltens charakterisiert und Empfehlungen für die schweißtechnische Fertigung generiert werden. Zum anderen dienten die Proben zur vollständigen Konzipierung, Entwicklung und Validierung einer digitalen Auswertemethodik. Die eigens programmierte Software ermöglicht die schnelle und praxisgerechte Auswertung von MVT-Proben, und implementiert dabei zusätzlich die zuvor entwickelten, prozessunabhängigen Bewertungsansätze. Als Ergebnis konnten kritische Dehnraten identifiziert werden,ab deren Überschreitung die betrachteten Werkstoffe unter den verwendeten Prüfbedingungen gesteigerte Erstarrungsrissanfälligkeiten aufweisen. So ergibt sich ein direkter Zusammenhang zwischen MVT-Prüfergebnissen und der Technological Strength Theory von Prokhorov. Die Bewertung des Werkstoffverhaltens anhand der kritischen Dehnraten erwies sich gegenüber den üblicherweise betrachteten Gesamtrisslängen als deutlich zuverlässiger. Zusammenfassend konnte gezeigt werden, dass die digitale Auswertung eine sinnvolle Verbesserung der analogen Standardauswertung darstellt. N2 - A multitude of testing procedures exist for the assessment of the solidification cracking susceptibilities of metal alloys. Many of these tests are only standardised on a very basic level. This also applies to the Modified Varestraint-/Transvarestraint Test (MVT), which was developed at the Federal Institute for Materials Research and Testing (BAM) and is one of many variants of the original Varestraint test. Its functional principle is the bending of flat specimens during welding. Any solidification cracks formed during the procedure are quantified in a later step using optical light microscopy. However, the test results don’t exclusively characterise the analysed material, but also greatly depend on the design of the testing rig, as well as the applied testing parameters. This complicates the comparison of results obtained under different circumstances, and furthermore can lead to an inaccurate or insufficient assessment of the material characteristics. The present work elaborates the geometrical aspects of solidification crack initiation and propagation during Varestraint testing. Applying Prokhorov’s Technological Strength Theory and the ensuing Brittleness Temperature Range, it is then determined how the start and end points of solidification cracks can be used to characterise the materials solidification cracking susceptibility. Ultimately, these insights are developed into a standard of evaluation which aims to eliminate the influence of testing parameters and characteristics, helping to greatly improve the comparability of Varestraint testing results. To test the newly developed standard of evaluation, MVT tests were carried out on several high-alloyed martensitic steels, as well as on the nickel-based Alloy 602 CA. On the one hand, the obtained results provide detailed characterisations of the solidification cracking susceptibilities of different materials as well as guidelines for their use in welding processes. On the other hand, the specimens were used for conception and validation of a novel, digital examination procedure. The software developed for this purpose allows for fast and practice-oriented examination of MVT specimens. At the same time, the new software implements the previously developed standard of evaluation to eliminate the influence of testing parameters. As a result, critical strain rates could be identified, which indicate the transition towards increased solidification cracking susceptibility under the respective circumstances. In this way, a direct connection between MVT test results and Prokhorov’s Technological Strength Theory can be drawn. Compared to the Total Crack Length, which is usually given as a test result, critical strain rates were found to be a more reliable characteristic. In summary, the newly developed procedures were proven to be a meaningful improvement of the current, analogue standard procedure. T3 - BAM Dissertationsreihe - 171 KW - Heißriss KW - Erstarrungsriss KW - Schweißen KW - Varestraint Test KW - Digitalisierung KW - Hot crack KW - Solidification KW - Welding KW - Varestraint test KW - digitalisation PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-553800 SN - 1613-4249 VL - 171 SP - 1 EP - 160 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-55380 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Griesche, Axel A1 - Boateng, Francis A1 - Kromm, Arne A1 - Kannengießer, Thomas A1 - Zscherpel, Uwe A1 - Ewert, Uwe T1 - Real-time X-ray Radiography for Hot Crack Detection during Welding N2 - Fast digital radiography was used to observe the crack development during single pass bead-on-plate gas tungsten arc welding with a minifocus X-ray source and a digital detector array with 75-micrometer pixel size. The sample material were 5 mm thick AlMgSi plates. An acquisition rate of 12 frames per second and an exposure time of 40 ms per frame were used for real-time observation of the hot crack propagation during welding. The basic spatial resolution of the images is about 80 µm. A 3D laminographic reconstruction of the acquired 2D radiographic images gives access to the volumetric extent of the cracks in the welded sample. The parallel use of a high-speed camera during welding allows the real-time inspection of surface cracks. The development of surface cracks was compared with the crack’s distribution in the sample volume and these results were correlated to the used welding parameters. T2 - MS&T 2016 CY - Salt Lake City, Utah, USA DA - 23.10.2016 KW - X-ray radiography KW - Welding KW - Hot crack KW - X-ray imaging KW - Laminography PY - 2016 AN - OPUS4-38069 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gumenyuk, Andrey A1 - Bakir, Nasim A1 - Rethmeier, Michael A1 - Pavlov, V. A1 - Zavjalov, S. A1 - Volvenko, S. T1 - Use of optical measurement technique to investigate the hot cracking sensitivity of 316L during laser beam welding N2 - This technique is the first to provide a measurement of the full strain field locally in the immediate vicinity of the solidification front. Dependency between the external strain rate and the critical local strain has been observed. The local critical strain in vicinity of the solidification front has observed between 3.6 and 4.2%. T2 - The 70th IIW Annual Assembly and International Conference CY - Shanghai, People's Republic of China DA - 25.06.2017 KW - Optical measurment technique KW - Hot crack PY - 2017 AN - OPUS4-41258 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -